GFX is in gfxoff mode during s0ix so we shouldn't need to
actually tear anything down and restore it.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not needed as the device is in gfxoff state so the CG/PG state
is handled just like it would be for gfxoff during runtime gfxoff.
This should also prevent delays on resume.
Reworked from Pratik's original patch (Alex)
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Provide and explanation as to why we skip GFX and PSP for
S0ix. GFX goes into gfxoff, same as runtime, so no need
to tear down and re-init. PSP is part of the always on
state, so no need to touch it.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The SMU expects CGPG to be enabled when entering S0ix.
with this we can re-enable SMU suspend.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This really needs to be done to properly tear down
the device. SMC, PSP, and GFX are still problematic,
need to dig deeper into what aspect of them that is
problematic.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the non-DC specific code into the DCE IP blocks similar
to how we handle DC. This cleans up the common suspend
and resume pathes.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vram is system memory, so no need to evict.
v2: use PM_EVENT messages
v3: use correct dev
v4: use driver flags
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set flags at the top level pmops callbacks to track
state. This cleans up the current set of flags and
properly handles S4 on S0ix capable systems.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It works fine and was only disabled because primary GPUs
don't enter runpm if there is a console bound to the fbdev due
to the kmap. This will at least allow runpm on secondary cards.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull more drm updates from Dave Airlie:
"This is mostly fixes but I missed msm-next pull last week. It's been
in drm-next.
Otherwise it's a selection of i915, amdgpu and misc fixes, one TTM
memory leak, nothing really major stands out otherwise.
core:
- vblank fence timing improvements
dma-buf:
- improve error handling
ttm:
- memory leak fix
msm:
- a6xx speedbin support
- a508, a509, a512 support
- various a5xx fixes
- various dpu fixes
- qseed3lite support for sm8250
- dsi fix for msm8994
- mdp5 fix for framerate bug with cmd mode panels
- a6xx GMU OOB race fixes that were showing up in CI
- various addition and removal of semicolons
- gem submit fix for legacy userspace relocs path
amdgpu:
- clang warning fix
- S0ix platform shutdown/poweroff fix
- misc display fixes
i915:
- color format fix
- -Wuninitialised reenabled
- GVT ww locking, cmd parser fixes
atyfb:
- fix build
rockchip:
- AFBC modifier fix"
* tag 'drm-next-2021-02-26' of git://anongit.freedesktop.org/drm/drm: (60 commits)
drm/panel: kd35t133: allow using non-continuous dsi clock
drm/rockchip: Require the YTR modifier for AFBC
drm/ttm: Fix a memory leak
drm/drm_vblank: set the dma-fence timestamp during send_vblank_event
dma-fence: allow signaling drivers to set fence timestamp
dma-buf: heaps: Rework heap allocation hooks to return struct dma_buf instead of fd
dma-buf: system_heap: Make sure to return an error if we abort
drm/amd/display: Fix system hang after multiple hotplugs (v3)
drm/amdgpu: fix shutdown and poweroff process failed with s0ix
drm/i915: Nuke INTEL_OUTPUT_FORMAT_INVALID
drm/i915: Enable -Wuninitialized
drm/amd/display: Remove Assert from dcn10_get_dig_frontend
drm/amd/display: Add vupdate_no_lock interrupts for DCN2.1
Revert "drm/amd/display: reuse current context instead of recreating one"
drm/amd/pm/swsmu: Avoid using structure_size uninitialized in smu_cmn_init_soft_gpu_metrics
fbdev: atyfb: add stubs for aty_{ld,st}_lcd()
drm/i915/gvt: Introduce per object locking in GVT scheduler.
drm/i915/gvt: Purge dev_priv->gt
drm/i915/gvt: Parse default state to update reg whitelist
dt-bindings: dp-connector: Drop maxItems from -supply
...
Remove NULL checks before vfree() to fix these warnings:
drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c:102:2-8: WARNING: NULL
check before some freeing functions is not needed.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Extend retry times of KIQ to avoid starvation situation caused by
long time full access of GPU by other VFs.
Signed-off-by: Jiawei Gu <Jiawei.Gu@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As dimgrey_cavefish driver is stable enough, set gpu recovery as default
in HW hang for dimgrey_cavefish.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If device suspend fails when we attempt to runtime suspend,
reset the runpm flag.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the flag used by kfd is not actually related to fbcon, it just happens
to align. Use the runpm flag instead so that we can decouple it from
the fbcon flag.
v2: fix resume as well
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are already called in amdgpu_device_suspend/resume which
are already called in the same functions.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use generic PCI reset for GPU reset if the user specifies
PCI reset as the reset mechanism. This should in general
only be used for validation.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use generic PCI reset for GPU reset if the user specifies
PCI reset as the reset mechanism. This should in general
only be used for validation.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use generic PCI reset for GPU reset if the user specifies
PCI reset as the reset mechanism. This should in general
only be used for validation.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to use generic PCI reset mechanisms (FLR, SBR) as
a reset mechanism to verify that the generic PCI reset mechanisms
are working properly.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To achieve the best QoS for high priority compute jobs it is
required to limit waves on other compute pipes as well.
This patch will set min value in non high priority
mmSPI_WCL_PIPE_PERCENT_CS[0-3] registers to minimize the
impact of normal/low priority compute jobs over high priority
compute jobs.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
In order to get appropriate timing for registers which
read/write is vertical line sensitive, add new IRQ source variable.
This interrupt is triggered by specific vertical line,
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Switch to smuio callbacks: use smuio v11_0_6 callbacks for
Sienna_cichlid and forward ASIC, use smuio v11_0 callbacks for the
other NV family ASIC.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable DCS
V1: Enable Async DCS.
V2: Add the ppfeaturemask bit to enable from the modprobe parameter.
V3:
1. add the flag to skip APU support.
2. remove the hunk for workload selection since
it doesn't impact the function.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable gfx wave limiting for gfx jobs before pushing high priority
compute jobs so that high priority compute jobs gets more resources
to finish early.
v2: use ring priority instead of job priority.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
