TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.
The port parameter is used to set the I/O port and does not make any
sense to use for USB serial devices.
The xmit_fifo_size parameter could be used to set the hardware transmit
fifo size of a legacy UART when it could not be detected, but the
interface is limited to eight bits and should be left unset when not
used.
The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds. The driver does not yet support changing
close_delay, but let's report back the default value actually used (0.5
seconds).
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.
The xmit_fifo_size parameter could be used to set the hardware transmit
fifo size of a legacy UART when it could not be detected, but the
interface is limited to eight bits and should be left unset when not
used.
Similarly, baud_base could be used to set the UART base clock when it
could not be detected but might as well be left unset when it is not
known.
The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds (not jiffies). The driver does not yet support
changing these, but let's report back the default values actually used
(0.5 and 30 seconds, respectively).
Fixes: 52af954599 ("USB: add USB serial ssu100 driver")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.
The xmit_fifo_size parameter could be used to set the hardware transmit
fifo size of a legacy UART when it could not be detected, but the
interface is limited to eight bits and should be left unset when not
used.
Similarly, baud_base could be used to set the UART base clock when it
could not be detected but might as well be left unset when it is not
known.
The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds (not jiffies). The driver does not yet support
changing these, but let's report back the default values actually used
(0.5 and 30 seconds, respectively).
Fixes: f7a33e608d ("USB: serial: add quatech2 usb to serial driver")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.
The port parameter is used to set the I/O port and does not make any
sense to use for USB serial devices.
The baud_base parameter could be used to set the UART base clock when it
could not be detected but might as well be left unset when it is not
known.
The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds. The driver does not yet support changing
these, but let's report back the default values actually used (0.5 and
30 seconds, respectively).
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.
The xmit_fifo_size parameter could be used to set the hardware transmit
fifo size of a legacy UART when it could not be detected, but the
interface is limited to eight bits and should be left unset when not
used.
Similarly, baud_base could be used to set the UART base clock when it
could not be detected but might as well be left unset when it is not
known.
The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds (not jiffies). The driver does not yet support
changing these, but let's report back the default values actually used
(0.5 and 30 seconds, respectively).
Fixes: faac64ad9c ("USB: serial: opticon: add serial line ioctls")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.
The port parameter is used to set the I/O port and does not make any
sense to use for USB serial devices.
The xmit_fifo_size parameter could be used to set the hardware transmit
fifo size of a legacy UART when it could not be detected, but the
interface is limited to eight bits and should be left unset when not
used.
Similarly, baud_base could be used to set the UART base clock when it
could not be detected but might as well be left unset when it is not
known.
The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds (not jiffies). The driver does not yet support
changing these, but let's report back the default values actually used
(0.5 and 30 seconds, respectively).
Fixes: 3f5429746d ("USB: Moschip 7840 USB-Serial Driver")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.
The port parameter is used to set the I/O port and does not make any
sense to use for USB serial devices.
The xmit_fifo_size parameter could be used to set the hardware transmit
fifo size of a legacy UART when it could not be detected, but the
interface is limited to eight bits and should be left unset when not
used.
Similarly, baud_base could be used to set the UART base clock when it
could not be detected but might as well be left unset when it is not
known.
The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds (not jiffies). The driver does not yet support
changing these, but let's report back the default values actually used
(0.5 and 30 seconds, respectively).
Fixes: 0f64478cbc ("USB: add USB serial mos7720 driver")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.
The port parameter is used to set the I/O port and does not make any
sense to use for USB serial devices.
The xmit_fifo_size parameter could be used to set the hardware transmit
fifo size of a legacy UART when it could not be detected, but the
interface is limited to eight bits and should be left unset when not
used.
Similarly, baud_base could be used to set the UART base clock when it
could not be detected but might as well be left unset when it is not
known.
The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds (not jiffies). The driver does not yet support
changing close_delay, but let's report back the default value actually
used (0.5 seconds).
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.
The port parameter is used to set the I/O port and does not make any
sense to use for USB serial devices.
The xmit_fifo_size parameter could be used to set the hardware transmit
fifo size of a legacy UART when it could not be detected, but the
interface is limited to eight bits and should be left unset when not
used.
Similarly, baud_base could be used to set the uart base clock when it
could not be detected, but might as well be left unset when it is not
known.
The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds (not jiffies). The driver does not yet support
changing these, but let's report back the default values actually used
(0.5 and 30 seconds, respectively).
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.
The FTDI driver is the only USB serial driver supporting the deprecated
ASYNC_SPD flags, which are reported back as they should by TIOCGSERIAL,
but the returned parameters did not include the line number.
The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds. The driver does not yet support changing
these, but let's report back the default values actually used (0.5 and
30 seconds, respectively).
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.
The port parameter is used to set the I/O port and does not make any
sense to use for USB serial devices.
The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds. The driver does not yet support changing
these, but let's report back the default values actually used (0.5 and
30 seconds, respectively).
Fixes: aac1fc386f ("USB: serial: add Fintek F81232 usb to serial driver")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.
The port parameter is used to set the I/O port and does not make any
sense to use for USB serial devices.
The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds. The driver does not yet support changing
these, but let's report back the default values actually used (0.5 and
30 seconds, respectively).
Fixes: aac1fc386f ("USB: serial: add Fintek F81232 usb to serial driver")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.
The port parameter is used to set the I/O port and does not make any
sense to use for USB serial devices.
The baud_base parameter could be used to set the UART base clock when it
could not be detected but might as well be left unset when it is not
known.
The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds. The driver does not yet support changing
these, but let's report back the default values actually used (0.5 and
30 seconds, respectively).
Fixes: 2f430b4bba ("USB: ark3116: Add TIOCGSERIAL and TIOCSSERIAL ioctl calls.")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Use the new multi-interface support in USB serial core to properly claim
also the control interface during probe. This prevents having another
driver claim the control interface and makes core allocate resources
also for the interrupt endpoint (currently unused).
Switch to probing only Communication Class interfaces and use the Union
functional descriptor to determine the corresponding data interface.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
A single USB function can be implemented using a group of interfaces and
this is for example commonly used for Communication Class devices.
Add support for multi-interface functions to USB serial core and export
an interface that allows drivers to claim a second sibling interface.
The interface could easily be extended to allow claiming further
interfaces if ever needed.
When a driver claims a sibling interface in probe(), core allocates
resources for any bulk in, bulk out, interrupt in and interrupt out
endpoints found also on the sibling interface.
Disconnect is implemented so that unbinding either interface will
release the other interface while disconnect() is called precisely once.
Similarly, suspend() is called when the first sibling interface is
suspended and resume() is called when the last sibling interface is
resumed by USB core.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Refactor endpoint classification and replace the build-time
endpoint-array sanity checks with runtime checks in preparation for
handling endpoints from a sibling interface.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
The suspending flag was added back in 2009 but no users ever followed.
Remove it.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
The XR21V141X does not have a 5- or 6-bit mode, but the current
implementation failed to properly restore the old setting when CS5 or
CS6 was requested. Instead an invalid request would be sent to the
device.
Fixes: c2d405aa86 ("USB: serial: add MaxLinear/Exar USB to Serial driver")
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org # 5.12
Signed-off-by: Johan Hovold <johan@kernel.org>
The variable error is initialized to 0 and is set to 1 this
value is never read as it is on an immediate return path. The
only read of error is to check it is 0 and this check is always
true at that point of the code. The variable is redundant and
can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Use an alternate clock divider algorithm and bit ordering for the TA and
TB versions of the pl2303. It was discovered that these variants do not
produce the correct baud rates with the existing scheme.
see https://lore.kernel.org/r/3aee5708-7961-f464-8c5f-6685d96920d6@IEEE.org
Signed-off-by: Michael G. Katzmann <michaelk@IEEE.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Add names for the device types to be printed at probe when debugging is
enabled.
Note that the HXN type is referred to as G for now as that is the name
the vendor uses.
Signed-off-by: Johan Hovold <johan@kernel.org>
Tighten the detection of the new HXN (G) type instead of assuming that
every device which doesn't support the old read request is an HXN.
Signed-off-by: Johan Hovold <johan@kernel.org>
Rename the legacy type which is supposedly a PL2303H which came in two
variants (and which we handle the same way).
Signed-off-by: Johan Hovold <johan@kernel.org>
Add support for detecting the HX, TA, TB and HXD device types and refuse
to bind to any unknown types.
Note that the HX type includes the XA variant, while the HXD type
includes the EA, RA and SA variants.
Signed-off-by: Johan Hovold <johan@kernel.org>
Clean up the type detection somewhat in preparation for adding support
for more types.
Note this also fixes the type debug printk for the new HXN type.
Signed-off-by: Johan Hovold <johan@kernel.org>
Forward declarations make the code larger and rewrites harder. Harder as
they are often omitted from global changes. Remove forward declarations
which are not really needed, i.e. the definition of the function is
before its first use.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ johan: update the prototype comments ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Forward declarations make the code larger, harder to follow and rewrite.
Harder as the declarations are often omitted from global changes. Remove
forward declarations which are not really needed, i.e. when the
definition of the function is before its first use.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Doing a
prctl(PR_SET_MM, PR_SET_MM_AUXV, addr, 1);
will copy 1 byte from userspace to (quite big) on-stack array
and then stash everything to mm->saved_auxv.
AT_NULL terminator will be inserted at the very end.
/proc/*/auxv handler will find that AT_NULL terminator
and copy original stack contents to userspace.
This devious scheme requires CAP_SYS_RESOURCE.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Make the GENERIC_IRQ_MULTI_HANDLER configuration correct
- Add a missing DT compatible string fir tge Ingenic driver
- Remove the pointless debugfs_file pointer from struct irqdomain
-----BEGIN PGP SIGNATURE-----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=PG58
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of irqchip updates:
- Make the GENERIC_IRQ_MULTI_HANDLER configuration correct
- Add a missing DT compatible string for the Ingenic driver
- Remove the pointless debugfs_file pointer from struct irqdomain"
* tag 'irq-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ingenic: Add support for the JZ4760
dt-bindings/irq: Add compatible string for the JZ4760B
irqchip: Do not blindly select CONFIG_GENERIC_IRQ_MULTI_HANDLER
ARM: ep93xx: Select GENERIC_IRQ_MULTI_HANDLER directly
irqdomain: Remove debugfs_file from struct irq_domain
lack of reevaluation of the timers which expire in softirq context under
certain circumstances, e.g. when the clock was set.
-----BEGIN PGP SIGNATURE-----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=GZmg
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix in for hrtimers to prevent an interrupt storm caused by
the lack of reevaluation of the timers which expire in softirq context
under certain circumstances, e.g. when the clock was set"
* tag 'timers-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimer: Update softirq_expires_next correctly after __hrtimer_get_next_event()
- Prevent a NULL pointer dereference in the migration_stop_cpu()
mechanims
- Prevent self concurrency of affine_move_task()
- Small fixes and cleanups related to task migration/affinity setting
- Ensure that sync_runqueues_membarrier_state() is invoked on the current
CPU when it is in the cpu mask
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmBOLHQTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoWqTEACQLldMda63sEBPzEh4s0y+s4BqUsUM
Pn5wVK1J91PZg1ofv4vLjIzKfjNuIbNNTswhux9kfb29LO0/KBd9BTYi442q4A+P
chMi0Amfp4AGYlwo5+RNwEFNDFr33TD2Ax83cJ6FIDlJzLj8DRfzyxtwBvXfBG5R
EZLTtKL30g20Y8N3nmQjvCInGvh0J1igr4lWXKtmvist7Ie3hW5jpvc8hF+VI0f+
C1JfHg6GRw2eSCVFaF9EEeqX8+Wce+MrWIjwwB363vIX82lc/XC2XVbvrsgpA2P8
sJaZz4KsOcXJLg9DWcN/OrpiMsgjnpKdMMsa3H2Uza8V3URtshpacb0wBWUpa1IA
R55oCv4aRst6hNcCW1ayOLSEOcR2A2qAW2/ktiWYDqerIqkSCezMktunmrOc/vrW
tmnEjlkYf0TNV54XREQ0Hr6OEnSIxqc9WrjbHUFbpv50YURqOCaHr19L0aOsemMJ
g1pJCNkQhv4gZSenM6Fgo5ucbWB2Nvzu/Y6g7B2VFcpa3K7fmRJZW2uU5FvhwbeQ
3ngvEwxMf3Rb6D7SpJyU41TYV9SqdOmoO4/UAFJ8YOlKp8biHCPmGh4+/QYza4Ky
BIfPKtpr7MnSuYayo0wYYcKG0nE+rRJrj0Y0MAtz+6SfRCEc5Vd0NfIPQeAxDTvp
oAITUrOuePiBrA==
=WSUq
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"A set of scheduler updates:
- Prevent a NULL pointer dereference in the migration_stop_cpu()
mechanims
- Prevent self concurrency of affine_move_task()
- Small fixes and cleanups related to task migration/affinity setting
- Ensure that sync_runqueues_membarrier_state() is invoked on the
current CPU when it is in the cpu mask"
* tag 'sched-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/membarrier: fix missing local execution of ipi_sync_rq_state()
sched: Simplify set_affinity_pending refcounts
sched: Fix affine_move_task() self-concurrency
sched: Optimize migration_cpu_stop()
sched: Collate affine_move_task() stoppers
sched: Simplify migration_cpu_stop()
sched: Fix migration_cpu_stop() requeueing
paravirt changes which modified arch_local_irq_restore not to use popf.
-----BEGIN PGP SIGNATURE-----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=IIWb
-----END PGP SIGNATURE-----
Merge tag 'objtool-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Thomas Gleixner:
"A single objtool fix to handle the PUSHF/POPF validation correctly for
the paravirt changes which modified arch_local_irq_restore not to use
popf"
* tag 'objtool-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool,x86: Fix uaccess PUSHF/POPF validation
- A fix for the static_call mechanism so it handles unaligned
addresses correctly.
- Make u64_stats_init() a macro so every instance gets a seperate lockdep
key.
- Make seqcount_latch_init() a macro as well to preserve the static
variable which is used for the lockdep key.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmBOK+ETHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYofjwD/0YlskydvnAOKeO8yjdBNiTtpw4aX5B
jTFTGXTgsmXeRfLPUt5Fte/9DX/tF2hKNYdy9bbLTK9Xf6+NLqTPf99OQwONB3Dn
3vRYPGMBeq7zzKgdH9n3H408YgmsON9IikvPUWDIxDvOsniCUnS2UIHmGefK/uTh
yuqnv+YhKBDLZz9XWiYm12Y163i7IsAurmyw95sI0G23HU0ityf7o42mXcFj2nkD
ET5xH6b+cHz1JUzmciLW2MFhx85IyaLN2ZfEAZSXgU2YwlCGPSOSp+MV3UOpa8YM
a6qW09L4rUsfWiB8SNMIaYyH7GHH5dvn9LrNP9/qF2QkAPeMisyTEkW2gyA/xLWG
xPv5T8QSWkWpgTc3BkSl6A6Y+o3YOoHaTcT3v1/FU6ZfYbdT5sPvLyA/MplRxhzd
thzrx9qSJvBzNiCNXgNdtICEuGTepuTb5ZbJTNmF4pMlNTB3Hbsl9EteAXD7V2pV
BDE7ckdLZnnd5pAtV3bxqETqftvU0GYA+s4Wp+UT8c4NQIm1XDxAV5UuK01LigQi
eAr5ja3TUGZWWr3uCM6QKZv6iYgldf9WtEQiovQaJIRUYZodmQ73AFA/mpeViPZF
ZQGMiSX7UBySv52J9GLR5pe+G8go1VNlYPuGw9qMBUysVpZ0104ccgvqlJgnFlCH
SA15mhCfEvZ0og==
=iE+t
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"A couple of locking fixes:
- A fix for the static_call mechanism so it handles unaligned
addresses correctly.
- Make u64_stats_init() a macro so every instance gets a seperate
lockdep key.
- Make seqcount_latch_init() a macro as well to preserve the static
variable which is used for the lockdep key"
* tag 'locking-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
seqlock,lockdep: Fix seqcount_latch_init()
u64_stats,lockdep: Fix u64_stats_init() vs lockdep
static_call: Fix the module key fixup
properly handle PID/TID for large PEBS.
- Handle the case properly when there's no PMU and therefore return an
empty list of perf MSRs for VMX to switch instead of reading random
garbage from the stack.
-----BEGIN PGP SIGNATURE-----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=djiL
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Make sure PMU internal buffers are flushed for per-CPU events too and
properly handle PID/TID for large PEBS.
- Handle the case properly when there's no PMU and therefore return an
empty list of perf MSRs for VMX to switch instead of reading random
garbage from the stack.
* tag 'perf_urgent_for_v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/perf: Use RET0 as default for guest_get_msrs to handle "no PMU" case
perf/x86/intel: Set PERF_ATTACH_SCHED_CB for large PEBS and LBR
perf/core: Flush PMU internal buffers for per-CPU events
Fix an oversight in the handling of the UEFI 2.8 EFI_RT_PROPERTIES_TABLE,
which was added v5.10, but failed to take the SetVirtualAddressMap() RT
service into account.
-----BEGIN PGP SIGNATURE-----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=/gWN
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-for-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fix from Ard Biesheuvel via Borislav Petkov:
"Fix an oversight in the handling of EFI_RT_PROPERTIES_TABLE, which was
added v5.10, but failed to take the SetVirtualAddressMap() RT service
into account"
* tag 'efi-urgent-for-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: stub: omit SetVirtualAddressMap() if marked unsupported in RT_PROP table
pointer in NMI is not coming from the syscall gap, correctly track IRQ
states in the #VC handler and access user insn bytes atomically in same
handler as latter cannot sleep.
- Balance 32-bit fast syscall exit path to do the proper work on exit
and thus not confuse audit and ptrace frameworks.
- Two fixes for the ORC unwinder going "off the rails" into KASAN
redzones and when ORC data is missing.
-----BEGIN PGP SIGNATURE-----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=rw8S
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.12_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- A couple of SEV-ES fixes and robustifications: verify usermode stack
pointer in NMI is not coming from the syscall gap, correctly track
IRQ states in the #VC handler and access user insn bytes atomically
in same handler as latter cannot sleep.
- Balance 32-bit fast syscall exit path to do the proper work on exit
and thus not confuse audit and ptrace frameworks.
- Two fixes for the ORC unwinder going "off the rails" into KASAN
redzones and when ORC data is missing.
* tag 'x86_urgent_for_v5.12_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev-es: Use __copy_from_user_inatomic()
x86/sev-es: Correctly track IRQ states in runtime #VC handler
x86/sev-es: Check regs->sp is trusted before adjusting #VC IST stack
x86/sev-es: Introduce ip_within_syscall_gap() helper
x86/entry: Fix entry/exit mismatch on failed fast 32-bit syscalls
x86/unwind/orc: Silence warnings caused by missing ORC data
x86/unwind/orc: Disable KASAN checking in the ORC unwinder, part 2
Fix wrong instruction encoding for lis in ppc_function_entry(), which could
potentially lead to missed kprobes.
Fix SET_FULL_REGS on 32-bit and 64e, which prevented ptrace of non-volatile GPRs
immediately after exec.
Clean up a missed SRR specifier in the recent interrupt rework.
Don't treat unrecoverable_exception() as an interrupt handler, it's called from
other handlers so shouldn't do the interrupt entry/exit accounting itself.
Fix build errors caused by missing declaration of [en/dis]able_kernel_vsx().
Thanks to Christophe Leroy, Daniel Axtens, Geert Uytterhoeven, Jiri Olsa, Naveen
N. Rao, Nicholas Piggin.
-----BEGIN PGP SIGNATURE-----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=ybft
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 5.12:
- Fix wrong instruction encoding for lis in ppc_function_entry(),
which could potentially lead to missed kprobes.
- Fix SET_FULL_REGS on 32-bit and 64e, which prevented ptrace of
non-volatile GPRs immediately after exec.
- Clean up a missed SRR specifier in the recent interrupt rework.
- Don't treat unrecoverable_exception() as an interrupt handler, it's
called from other handlers so shouldn't do the interrupt entry/exit
accounting itself.
- Fix build errors caused by missing declarations for
[en/dis]able_kernel_vsx().
Thanks to Christophe Leroy, Daniel Axtens, Geert Uytterhoeven, Jiri
Olsa, Naveen N. Rao, and Nicholas Piggin"
* tag 'powerpc-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/traps: unrecoverable_exception() is not an interrupt handler
powerpc: Fix missing declaration of [en/dis]able_kernel_vsx()
powerpc/64s/exception: Clean up a missed SRR specifier
powerpc: Fix inverted SET_FULL_REGS bitop
powerpc/64s: Use symbolic macros for function entry encoding
powerpc/64s: Fix instruction encoding for lis in ppc_function_entry()
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmBLsyoUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMpYgf/Zu1Byif+XZVdwm52wJN38ppUUVmn
4u8HvQ8Ht+P0cGg1IaNx9D5QXGRgdn72qEpWUF5aH03ahTANAuf6zXw+evKmiub/
RtJfxZWEcWeLdugLVHUSrR4MOox7uvFmCdcdht4sEPdjFdH/9JeceC3A1pZ/DYTR
+eS+E3dMWQjXnd2Omo/5f5H1LTZjNLEditnkcHT5unwKKukc008V/avgs8xOAKJB
xf3oqJF960IO+NYf8rRQb8WtyGeo0grrWjgeqvZ37gwGUaFB9ldVxchsVLsL66OR
bJRIoSiTgL+TUYSMQ5mKG4tmmBnPHUHfgfNoOXlWMoJHIjFeQ9oM6eTHhA==
=QTFW
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"More fixes for ARM and x86"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: LAPIC: Advancing the timer expiration on guest initiated write
KVM: x86/mmu: Skip !MMU-present SPTEs when removing SP in exclusive mode
KVM: kvmclock: Fix vCPUs > 64 can't be online/hotpluged
kvm: x86: annotate RCU pointers
KVM: arm64: Fix exclusive limit for IPA size
KVM: arm64: Reject VM creation when the default IPA size is unsupported
KVM: arm64: Ensure I-cache isolation between vcpus of a same VM
KVM: arm64: Don't use cbz/adr with external symbols
KVM: arm64: Fix range alignment when walking page tables
KVM: arm64: Workaround firmware wrongly advertising GICv2-on-v3 compatibility
KVM: arm64: Rename __vgic_v3_get_ich_vtr_el2() to __vgic_v3_get_gic_config()
KVM: arm64: Don't access PMSELR_EL0/PMUSERENR_EL0 when no PMU is available
KVM: arm64: Turn kvm_arm_support_pmu_v3() into a static key
KVM: arm64: Fix nVHE hyp panic host context restore
KVM: arm64: Avoid corrupting vCPU context register in guest exit
KVM: arm64: nvhe: Save the SPE context early
kvm: x86: use NULL instead of using plain integer as pointer
KVM: SVM: Connect 'npt' module param to KVM's internal 'npt_enabled'
KVM: x86: Ensure deadline timer has truly expired before posting its IRQ
Merge misc fixes from Andrew Morton:
"28 patches.
Subsystems affected by this series: mm (memblock, pagealloc, hugetlb,
highmem, kfence, oom-kill, madvise, kasan, userfaultfd, memcg, and
zram), core-kernel, kconfig, fork, binfmt, MAINTAINERS, kbuild, and
ia64"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (28 commits)
zram: fix broken page writeback
zram: fix return value on writeback_store
mm/memcg: set memcg when splitting page
mm/memcg: rename mem_cgroup_split_huge_fixup to split_page_memcg and add nr_pages argument
ia64: fix ptrace(PTRACE_SYSCALL_INFO_EXIT) sign
ia64: fix ia64_syscall_get_set_arguments() for break-based syscalls
mm/userfaultfd: fix memory corruption due to writeprotect
kasan: fix KASAN_STACK dependency for HW_TAGS
kasan, mm: fix crash with HW_TAGS and DEBUG_PAGEALLOC
mm/madvise: replace ptrace attach requirement for process_madvise
include/linux/sched/mm.h: use rcu_dereference in in_vfork()
kfence: fix reports if constant function prefixes exist
kfence, slab: fix cache_alloc_debugcheck_after() for bulk allocations
kfence: fix printk format for ptrdiff_t
linux/compiler-clang.h: define HAVE_BUILTIN_BSWAP*
MAINTAINERS: exclude uapi directories in API/ABI section
binfmt_misc: fix possible deadlock in bm_register_write
mm/highmem.c: fix zero_user_segments() with start > end
hugetlb: do early cow when page pinned on src mm
mm: use is_cow_mapping() across tree where proper
...
- More compatible strings for the Ingenic irqchip (introducing the
JZ4760B SoC)
- Select GENERIC_IRQ_MULTI_HANDLER on the ARM ep93xx platform
- Drop all GENERIC_IRQ_MULTI_HANDLER selections from the irqchip
Kconfig, now relying on the architecture to get it right
- Drop the debugfs_file field from struct irq_domain, now that
debugfs can track things on its own
-----BEGIN PGP SIGNATURE-----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=+JFY
-----END PGP SIGNATURE-----
Merge tag 'irqchip-fixes-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- More compatible strings for the Ingenic irqchip (introducing the
JZ4760B SoC)
- Select GENERIC_IRQ_MULTI_HANDLER on the ARM ep93xx platform
- Drop all GENERIC_IRQ_MULTI_HANDLER selections from the irqchip
Kconfig, now relying on the architecture to get it right
- Drop the debugfs_file field from struct irq_domain, now that
debugfs can track things on its own
Here are some small misc/char driver fixes for 5.12-rc3 to resolve some
reported problems:
- habanalabs driver fixes
- Acrn build fixes (reported many times)
- pvpanic module table export fix
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYEzNxA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn/KACdFetUjRJSB1d1QdL/tVZBzMqJvBoAoMViU6nf
UL+tHbnysQwUjwVL62HJ
=VrJd
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small misc/char driver fixes to resolve some reported
problems:
- habanalabs driver fixes
- Acrn build fixes (reported many times)
- pvpanic module table export fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc/pvpanic: Export module FDT device table
misc: fastrpc: restrict user apps from sending kernel RPC messages
virt: acrn: Correct type casting of argument of copy_from_user()
virt: acrn: Use EPOLLIN instead of POLLIN
virt: acrn: Use vfs_poll() instead of f_op->poll()
virt: acrn: Make remove_cpu sysfs invisible with !CONFIG_HOTPLUG_CPU
cpu/hotplug: Fix build error of using {add,remove}_cpu() with !CONFIG_SMP
habanalabs: fix debugfs address translation
habanalabs: Disable file operations after device is removed
habanalabs: Call put_pid() when releasing control device
drivers: habanalabs: remove unused dentry pointer for debugfs files
habanalabs: mark hl_eq_inc_ptr() as static
Here are some small staging driver fixes for reported problems for
5.12-rc3. They include:
- wfx header file cleanup patch reverted as it could cause
problems
- comedi driver endian fixes
- buffer overflow problems for staging wifi drivers
- build dependency issue for rtl8192e driver
All have been in linux-next for a while with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYEzOfg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymGkwCgxw0w+Mutkd34uRTjOZ87RYK5gIUAn08SJdQD
wLYTj5vCCEYxdZl+tfZh
=5IU1
-----END PGP SIGNATURE-----
Merge tag 'staging-5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for reported problems. They
include:
- wfx header file cleanup patch reverted as it could cause problems
- comedi driver endian fixes
- buffer overflow problems for staging wifi drivers
- build dependency issue for rtl8192e driver
All have been in linux-next for a while with no reported problems"
* tag 'staging-5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (23 commits)
Revert "staging: wfx: remove unused included header files"
staging: rtl8188eu: prevent ->ssid overflow in rtw_wx_set_scan()
staging: rtl8188eu: fix potential memory corruption in rtw_check_beacon_data()
staging: rtl8192u: fix ->ssid overflow in r8192_wx_set_scan()
staging: comedi: pcl726: Use 16-bit 0 for interrupt data
staging: comedi: ni_65xx: Use 16-bit 0 for interrupt data
staging: comedi: ni_6527: Use 16-bit 0 for interrupt data
staging: comedi: comedi_parport: Use 16-bit 0 for interrupt data
staging: comedi: amplc_pc236_common: Use 16-bit 0 for interrupt data
staging: comedi: pcl818: Fix endian problem for AI command data
staging: comedi: pcl711: Fix endian problem for AI command data
staging: comedi: me4000: Fix endian problem for AI command data
staging: comedi: dmm32at: Fix endian problem for AI command data
staging: comedi: das800: Fix endian problem for AI command data
staging: comedi: das6402: Fix endian problem for AI command data
staging: comedi: adv_pci1710: Fix endian problem for AI command data
staging: comedi: addi_apci_1500: Fix endian problem for command sample
staging: comedi: addi_apci_1032: Fix endian problem for COS sample
staging: ks7010: prevent buffer overflow in ks_wlan_set_scan()
staging: rtl8712: Fix possible buffer overflow in r8712_sitesurvey_cmd
...
Here are some small tty and serial driver fixes for 5.12-rc3 to resolve
some reported problems:
- led tty trigger fixes based on review and were acked by the
led maintainer
- revert a max310x serial driver patch as it was causing
problems.
- revert a pty change as it was also causing problems
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYEzQKA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylmqgCgjYn5iF5uzv4jCCX0mukLLN9MyfEAn1IkukQX
4ezw02iwjucLQmlk/MaH
=QiSN
-----END PGP SIGNATURE-----
Merge tag 'tty-5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial driver fixes to resolve some
reported problems:
- led tty trigger fixes based on review and were acked by the led
maintainer
- revert a max310x serial driver patch as it was causing problems
- revert a pty change as it was also causing problems
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "drivers:tty:pty: Fix a race causing data loss on close"
Revert "serial: max310x: rework RX interrupt handling"
leds: trigger/tty: Use led_set_brightness_sync() from workqueue
leds: trigger: Fix error path to not unlock the unlocked mutex
Here are a small number of USB fixes for 5.12-rc3 to resolve a bunch of
reported issues:
- usbip fixups for issues found by syzbot
- xhci driver fixes and quirk additions
- gadget driver fixes
- dwc3 QCOM driver fix
- usb-serial new ids and fixes
- usblp fix for a long-time issue
- cdc-acm quirk addition
- other tiny fixes for reported problems
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYEzR3A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylgSQCgjkrg8qFJLTss/PNe0/1zQIFNl2sAn2FyPV0y
K34seYUf0LDj3OcXRLGl
=72FI
-----END PGP SIGNATURE-----
Merge tag 'usb-5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a small number of USB fixes for 5.12-rc3 to resolve a bunch
of reported issues:
- usbip fixups for issues found by syzbot
- xhci driver fixes and quirk additions
- gadget driver fixes
- dwc3 QCOM driver fix
- usb-serial new ids and fixes
- usblp fix for a long-time issue
- cdc-acm quirk addition
- other tiny fixes for reported problems
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
xhci: Fix repeated xhci wake after suspend due to uncleared internal wake state
usb: xhci: Fix ASMedia ASM1042A and ASM3242 DMA addressing
xhci: Improve detection of device initiated wake signal.
usb: xhci: do not perform Soft Retry for some xHCI hosts
usbip: fix vudc usbip_sockfd_store races leading to gpf
usbip: fix vhci_hcd attach_store() races leading to gpf
usbip: fix stub_dev usbip_sockfd_store() races leading to gpf
usbip: fix vudc to check for stream socket
usbip: fix vhci_hcd to check for stream socket
usbip: fix stub_dev to check for stream socket
usb: dwc3: qcom: Add missing DWC3 OF node refcount decrement
USB: usblp: fix a hang in poll() if disconnected
USB: gadget: udc: s3c2410_udc: fix return value check in s3c2410_udc_probe()
usb: renesas_usbhs: Clear PIPECFG for re-enabling pipe with other EPNUM
usb: dwc3: qcom: Honor wakeup enabled/disabled state
usb: gadget: f_uac1: stop playback on function disable
usb: gadget: f_uac2: always increase endpoint max_packet_size by one audio slot
USB: gadget: u_ether: Fix a configfs return code
usb: dwc3: qcom: add ACPI device id for sc8180x
Goodix Fingerprint device is not a modem
...
Fix an urgent regression introduced by commit baa2c7c971 ("block:
set .bi_max_vecs as actual allocated vector number"), which could
cause unexpected hung since linux 5.12-rc1.
Resolve it by avoiding using bio->bi_max_vecs completely.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQThPAmQN9sSA0DVxtI5NzHcH7XmBAUCYEpAyBUcaHNpYW5na2Fv
QHJlZGhhdC5jb20ACgkQOTcx3B+15gS55wD9GnsRm3ABN7AUKEX1lcGBt67dTEfv
587cRSwJWHHbAl8A/0yLTt1CsnPXXxBchSGkIZ3MmQ/q2OVJ5o4rt9FRjMEC
=opvX
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fix from Gao Xiang:
"Fix an urgent regression introduced by commit baa2c7c971 ("block:
set .bi_max_vecs as actual allocated vector number"), which could
cause unexpected hung since linux 5.12-rc1.
Resolve it by avoiding using bio->bi_max_vecs completely"
* tag 'erofs-for-5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix bio->bi_max_vecs behavior change
- avoid 'make image_name' invoking syncconfig
- fix a couple of bugs in scripts/dummy-tools.
- fix LLD_VENDOR and locale issues in scripts/ld-version.sh
- rebuild GCC plugins when the compiler is upgraded
- allow LTO to be enabled with KASAN_HW_TAGS
- allow LTO to be enabled without LLVM=1
-----BEGIN PGP SIGNATURE-----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=wmt8
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- avoid 'make image_name' invoking syncconfig
- fix a couple of bugs in scripts/dummy-tools
- fix LLD_VENDOR and locale issues in scripts/ld-version.sh
- rebuild GCC plugins when the compiler is upgraded
- allow LTO to be enabled with KASAN_HW_TAGS
- allow LTO to be enabled without LLVM=1
* tag 'kbuild-fixes-v5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: fix ld-version.sh to not be affected by locale
kbuild: remove meaningless parameter to $(call if_changed_rule,dtc)
kbuild: remove LLVM=1 test from HAS_LTO_CLANG
kbuild: remove unneeded -O option to dtc
kbuild: dummy-tools: adjust to scripts/cc-version.sh
kbuild: Allow LTO to be selected with KASAN_HW_TAGS
kbuild: dummy-tools: support MPROFILE_KERNEL checks for ppc
kbuild: rebuild GCC plugins when the compiler is upgraded
kbuild: Fix ld-version.sh script if LLD was built with LLD_VENDOR
kbuild: dummy-tools: fix inverted tests for gcc
kbuild: add image_name to no-sync-config-targets
commit 0d8359620d ("zram: support page writeback") introduced two
problems. It overwrites writeback_store's return value as kstrtol's
return value, which makes return value zero so user could see zero as
return value of write syscall even though it wrote data successfully.
It also breaks index value in the loop in that it doesn't increase the
index any longer. It means it can write only first starting block index
so user couldn't write all idle pages in the zram so lose memory saving
chance.
This patch fixes those issues.
Link: https://lkml.kernel.org/r/20210312173949.2197662-2-minchan@kernel.org
Fixes: 0d8359620d9b("zram: support page writeback")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reported-by: Amos Bianchi <amosbianchi@google.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: John Dias <joaodias@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
writeback_store's return value is overwritten by submit_bio_wait's return
value. Thus, writeback_store will return zero since there was no IO
error. In the end, write syscall from userspace will see the zero as
return value, which could make the process stall to keep trying the write
until it will succeed.
Link: https://lkml.kernel.org/r/20210312173949.2197662-1-minchan@kernel.org
Fixes: 3b82a051c101("drivers/block/zram/zram_drv.c: fix error return codes not being returned in writeback_store")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: John Dias <joaodias@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As described in the split_page() comment, for the non-compound high order
page, the sub-pages must be freed individually. If the memcg of the first
page is valid, the tail pages cannot be uncharged when be freed.
For example, when alloc_pages_exact is used to allocate 1MB continuous
physical memory, 2MB is charged(kmemcg is enabled and __GFP_ACCOUNT is
set). When make_alloc_exact free the unused 1MB and free_pages_exact free
the applied 1MB, actually, only 4KB(one page) is uncharged.
Therefore, the memcg of the tail page needs to be set when splitting a
page.
Michel:
There are at least two explicit users of __GFP_ACCOUNT with
alloc_exact_pages added recently. See 7efe8ef274 ("KVM: arm64:
Allocate stage-2 pgd pages with GFP_KERNEL_ACCOUNT") and c419621873
("KVM: s390: Add memcg accounting to KVM allocations"), so this is not
just a theoretical issue.
Link: https://lkml.kernel.org/r/20210304074053.65527-3-zhouguanghui1@huawei.com
Signed-off-by: Zhou Guanghui <zhouguanghui1@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Rui Xiang <rui.xiang@huawei.com>
Cc: Tianhong Ding <dingtianhong@huawei.com>
Cc: Weilong Chen <chenweilong@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
