Replaced all uses of uintX_t types to uX types, to be
checkpatch clean.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moved kernel-doc comments for non-inline functions
from header files to .c files.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add cmd_flags parameter to all dprc APIs to comply
with the dprc 4.0 MC interface. Updated MC version
major number. Pass irq args in struct instead of
separate args.
dprc 4.0 uses MC-relative offsets to specify object regions,
instead of physical addresses. So, translate_mc_addr() and
struct fsl_mc_addr_translation_range need to be updated
accordingly.
Update commands for 4.0: add new commands 'set/get
obj irq', 'set obj label', 'get obj descriptor'.
Remove 'get portal paddr'.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dpcon object minor version number updated to match latest
MC firmware. This change is needed because the dpcon
object binds to the allocator and the current driver match
logic uses object version numbers.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add cmd_flags parameter to all dpbp APIs to comply
with the dpmcp 2.0 MC interface. Updated version
major number. Pass irq args in struct instead of
separate args.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add cmd_flags parameter to all dpbp APIs to comply
with the dpbp 2.0 MC interface. Updated MC version
major number. Pass irq args in struct instead of
separate args.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add cmd_flags parameter to all dpmng APIs to comply
with 8.0 MC firmware interface. Updated MC version
major number.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Management Complex (MC) binary interface added a new "flags"
field to the command header.
Add the definitions for this field in preparation for adding the
new cmd_flags parameter to all MC interface APIs.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch is intended to fix the checkpatch warning for ``block``
comments for staging/android driver.
Signed-off-by: Sriram Raghunathan <sriram@marirs.net.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The lock in vnt_submit_rx_urb_complete is blocked by TX activity.
The lock comes from a time when RX needed to be synchronized with
other parts of the driver because the WLAN API was in driver.
Since this is now dealt with in mac80211 the lock is unnecessary.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Presently the TX buffer stops while filling the buffer and urb.
However, this does not make use of the available buffer
space, it also lags the speed of the TX troughtput.
Only stop the queue when the buffer becomes full. The
URB complete will start the queue again when a
buffer and URB is available.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device can now operate in low power mode
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device should ready to listen to next beacon so on count down of
wake_up_count == 1.
schedule command WLAN_CMD_TBTT_WAKEUP which calls vnt_next_tbtt_wakeup which
wakes the device.
This restores this back to vendors code with a slight difference the
count down is in the interrupt handler.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The TSF counter is presently unused on driver in infrastructure mode.
It is needed to implement power saving functions and wireless stats that
are passed in interrupt handling.
Ensuring counter is synced with access point beacon.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Presently the TX buffer stops while filling the buffer.
However, this does not make use of the available buffer
space, it also lags the speed of the TX troughtput.
Only stop the queue when the buffer becomes full. The
Interupt handler will start the queue again when a
buffer is available.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The result variable is not set anywhere beyond its initialization,
therefore it can be remove.
Signed-off-by: Tillmann Heidsieck <theidsieck@leenox.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We exit the above loop either if curroff >= (HFA384x_PDA_LEN_MAX / 2 - 1)
or if we found the END marker in the element beyond the current one. The
first case is checked for in the preceding if statement, therefore the
second if statement is redundant and can be removed.
Signed-off-by: Tillmann Heidsieck <theidsieck@leenox.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We test for an END marker in the element beyond the current one, this
effectively limits the size of the array to be HFA384x_PDA_LEN_MAX/2 - 1
not HFA384x_PDR_END_OF_PDA/2. This patch fixes a possible buffer
overflow in case there was no END marker.
Signed-off-by: Tillmann Heidsieck <theidsieck@leenox.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function twoToPowerOfx that iteratively calculates the power of 2
may be replaced with shift operator
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MB(x) and KB(x) macros are not used and therefore they can be
removed
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use SZ_xM defined in linux/sizes.h instead of custom MB(x) macro
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add space between '#include' keyword and the header name
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecessary space in sm750_help.h to fix the following
checkpatch.pl error:
drivers/staging/sm750fb/sm750_help.h:46: space prohibited after that '~' (ctx:ExW)
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver is using -1 instead of the -ENOMEM defined macro to specify
that a buffer allocation failed. Since the error number is propagated,
the caller will get a -EPERM which is the wrong error condition.
Also, the smatch tool complains with the following warning:
dgap_parsefile() warn: returning -1 instead of -ENOMEM is sloppy
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The IEEE80211_STYPE_PROBE_REQ flag appears twice in the expression
and coccicheck complains with:
wilc_wfi_cfgoperations.h:80:3-38: duplicated argument to & or |
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver create a host bus adapter device when s-Par sends a
device create message to create a storage adapter on the visorbus.
When the message is received by visorbus, the visorhba_probe function
is called and the hba device is created and managed by the visorhba
driver.
Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here, we actually have a problem in 2038 or at the latest in 2106 when
the lc_expiry variable on the wire protocol overflows, including on
64-bit architectures.
Now that the actual code was removed, only on-the wire structure
is left so we add in a y2038 warning to remind whoever gets to
implement it again about this problem.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Client capabilities is an outdated feature that never worked properly,
so let's get rid of the client support since modern servers
don't have this support either.
The patch is big, but since it just removes one large feature,
so it's hopefully easy to verify.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is unused anywhere in the client code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This code is not called anywhere in the current client code,
so we can remove it.
Also remove a helper function lprocfs_init_mps_stats
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
obd_stats in the form present were only used on the server,
so let's remove them from the client code
This also removes lprocfs_init_ops_stats helper.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nothing uses dt_object now, so we can kill the implementation
and the stale references.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Most of the code in llog.c and llog_cat.c is completely unused
on the client and can be removed, as a preparation for removing
the dt_object code.
Two tricky parts are:
- In llog_cat_close(), we rely on the fact that llh_flags never
contains LLOG_F_ZAP_WHEN_EMPTY, because nobody ever sets that
flag.
- In llog_read_header(), we check the return value of the lpi_cb
callback, and again we know that it cannot be LLOG_PROC_BREAK
or LLOG_DEL_RECORD and can remove the respective code path.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These functions only make sense on the server.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is only used on the servers to evict clients.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The CFS_TIME_T macro serves no real purpose as we stopped using time_t
and changed over to time64_t, so we can remove the last remaining uses
of this.
Two uses of this macro are incorrect and refer to jiffies values
rather than time_t, and one refers to an inode timespec that gets
changed separately.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is only used on the server to keep track of alive clients
and feeds into ping evictor (that was removed from the client code).
Also remove struct obd's obd_exports_timed and
struct obd_export's exp_obd_chain_timed used to keep track of that
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
More code that makes no sense on the client and that can be
removed without replacement.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A bunch of API functions deal with time values but are now
completely unused in lustre. This removes them in order to
remove all references to time_t from the header files.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a simple cleanup that I did after noticing that the abstraction
for the timer functions in completely pointless, and the one user (ptlrpc)
can just as well call the native Linux functions.
For good measure, this also removes the empty libcfs_arch_init()
and libcfs_arch_cleanup() functions that are defined in the
same file.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lov_stripe_md_cmp lov_lum_lsm_cmp lov_lum_swab_if_needed functions
have not been in used for a long time, so lets just remove them.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This code is never used on the client and can simply be removed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All request timestamps and deadlines in lustre are recorded in time_t
and timeval units, which overflow in 2038 on 32-bit systems.
In this patch, I'm converting them to time64_t and timespec64,
respectively. Unfortunately, this makes a relatively large patch,
but I could not find an obvious way to split it up some more without
breaking atomicity of the change.
Also unfortunately, this introduces two instances of div_u64_rem()
in the request path, which can be slow on 32-bit architectures. This
can probably be avoided by a larger restructuring of the code, but
it is unlikely that lustre is used in performance critical setups
on 32-bit architectures, so it seems better to optimize for correctness
rather than speed here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here we use an unsigned long to store the timeout for gc,
which is probably safe until 2106, but this patch converts it
to use ktime_get_real_seconds() and time64_t for consistency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The exp_flvr_expire and imp_sec_expire are defined as 'unsigned long',
which doesn't overflow until 2106, but to be on the safe side, this
changes the code to use time64_t like we do everywhere else.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These three are timestamps that are sent over the wire in mdc_lib
and the obd logging 64-bit values, but are generated using the 32-bit
get_seconds() function, which will eventually overflow.
Changing them to use 64-bit ktime_get_real_seconds() solves the problem.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
