The current implementation of the async flip wm0/ddb optimization
does not work at all. The biggest problem is that we skip the
whole intel_pipe_update_{start,end}() dance and thus never actually
complete the commit that is trying to do the wm/ddb change.
To fix this we need to move the do_async_flip flag to the crtc
state since we handle commits per-pipe, not per-plane.
Also since all planes can now be included in the first/last
"async flip" (which gets converted to a sync flip to do the
wm/ddb mangling) we need to be more careful when checking if
the plane state is async flip comptatible. Only planes doing
the async flip should be checked and other planes are perfectly
fine not adhereing to any async flip related limitations.
However for subsequent commits which are actually going do the
async flip in hardware we want to make sure no other planes
are in the state. That should never happen assuming we did our
job correctly, so we'll toss in a WARN to make sure we catch
any bugs here.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: c3639f3be4 ("drm/i915: Use wm0 only during async flips for DG2")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214105532.13049-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit 2e08437160)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Since the async flip state check is done very late and
thus it can see potentially all the planes in the state
(due to the wm/ddb optimization) we need to move the
"can the requested plane do async flips at all?" check
much earlier. For this purpose we introduce
intel_async_flip_check_uapi() that gets called early during
the atomic check.
And for good measure we'll throw in a couple of basic checks:
- is the crtc active?
- was a modeset flagged?
- is+was the plane enabled?
Though atm all of those should be guaranteed by the fact
that the async flip can only be requested through the legacy
page flip ioctl.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: c3639f3be4 ("drm/i915: Use wm0 only during async flips for DG2")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214105532.13049-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit b0b2bed2a1)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
data_rate==0 no longer means a plane is disabled, it could
also mean we want to use the minimum ddb allocation for it.
Hence we can't bail out early during ddb allocation or
else we'll simply forget to allocate any ddb for such planes.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: 6a4d8cc6bb ("drm/i915: Don't allocate extra ddb during async flip for DG2")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214105532.13049-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit 6475e10682)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
bigjoiner_pipes==0 leads bigjoiner_master_pipe() to
do BIT(ffs(0)-1) which is undefined behaviour. The code should
actually still work fine since the only place we provoke
that is intel_crtc_bigjoiner_slave_pipes() and it'll bitwise
AND the result with 0, so doesn't really matter what we get
out of bigjoiner_master_pipe(). But best not provoke undefined
behaviour anyway.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: a6e7a006f5 ("drm/i915: Change bigjoiner state tracking to use the pipe bitmask")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223131315.18016-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
(cherry picked from commit cccc71b552)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The mdev attribute "name" is required by some middle software, e.g.
KubeVirt, an open source SW that manages VM on Kubernetes cluster uses
the mdev sysfs directory/file structure to discover mediated device in
nodes in the cluster.
v2:
- Fix the missing defination in gvt_type_attrs. (Zhenyu)
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Hui Chun Ong <hui.chun.ong@intel.com>
Cc: Terrence Xu <terrence.xu@intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhi Wang <zhi.wang.linux@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220222150532.9090-1-zhi.a.wang@intel.com
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
We're experimenting a bit with the process this time, with Dmitry
collecting display patches and merging them into msm-next with me
handling the gpu/etc side of things. Summary of interesting new bits
and pieces
* dpu + dp support for sc8180x
* dp support for sm8350
* dpu + dsi support for qcm2290
* 10nm dsi phy tuning support
* bridge support for dp encoder
* gpu support for additional 7c3 SKUs
* assorted cleanups and fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGu=Jdrw6DqYOYPTMks7=zatrsvdR=o6DpjqZ=TQQhFZuw@mail.gmail.com
Cross-subsystem Changes:
- drm-next backmerge for buddy allocator changes
Driver Changes:
- Skip i915_perf init for DG2 as it is not yet enabled (Ram)
- Add missing workarounds for DG2 (Clint)
- Add 64K page/align support for platforms like DG2 that require it (Matt A, Ram, Bob)
- Add accelerated migration support for DG2 (Matt A)
- Add flat CCS support for XeHP SDV (Abdiel, Ram)
- Add Compute Command Streamer (CCS) engine support for XeHP SDV (Michel,
Daniele, Aravind, Matt R)
- Don't support parallel submission on compute / render (Matt B, Matt R)
- Disable i915 build on PREEMPT_RT until RT behaviour fixed (Sebastian)
- Remove RPS interrupt support for TGL+ (Jose)
- Fix S/R with PM_EARLY for non-GTT mappable objects on DG2 (Matt, Lucas)
- Skip stolen memory init if it is fully reserved (Jose)
- Use iosys_map for GuC data structures that may be in LMEM BAR or SMEM (Lucas)
- Do not complain about stale GuC reset notifications for banned contexts (John)
- Move context descriptor fields to intel_lrc.h
- Start adding support for small BAR (Matt A)
- Clarify vma lifetime (Thomas)
- Simplify subplatform detection on TGL (Jose)
- Correct the param count for unset GuC SLPC param (Vinay, Umesh)
- Read RP_STATE_CAP correctly on Gen12 with GuC SLPC (Vinay)
- Initialize GuC submission locks and queues early (Daniele)
- Fix GuC flag query helper function to not modify state (John)
- Drop fake lmem support now we have real hardware available (Lucas)
- Move misplaced W/A to their correct locations (Srinivasan)
- Use get_reset_domain() helper (Tejas)
- Move context descriptor fields to intel_lrc.h (Matt R)
- Selftest improvements (Matt A)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YiBzY1dM7bKwMQ3H@jlahtine-mobl.ger.corp.intel.com
UAPI Changes:
Cross-subsystem Changes:
- Improve performance of some fbdev ops, in some cases up to 6x faster.
Core Changes:
- Some small DP fixes.
- Find panels in subnodes of OF devices, and add of_get_drm_panel_display_mode
to retrieve mode.
- Add drm_object_property_get_default_value and use it for resetting
zpos in plane state reset, removing the need for individual drivers
to do it.
- Same for color encoding and color range props.
- Update panic handling todo doc.
- Add todo that format conversion helpers should be sped up similarly to fbdev ops.
Driver Changes:
- Add panel orientation property to simpledrm for quirked panels.
- Assorted small fixes to tiny/repaper, nouveau, stm, omap, ssd130x.
- Add crc support to stm/ltdc.
- Add MIPI DBI compatible SPI driver
- Assorted small fixes to tiny panels and bridge drivers.
- Add AST2600 support to aspeed.
-----BEGIN PGP SIGNATURE-----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=TVQP
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2022-03-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.18:
UAPI Changes:
Cross-subsystem Changes:
- Improve performance of some fbdev ops, in some cases up to 6x faster.
Core Changes:
- Some small DP fixes.
- Find panels in subnodes of OF devices, and add of_get_drm_panel_display_mode
to retrieve mode.
- Add drm_object_property_get_default_value and use it for resetting
zpos in plane state reset, removing the need for individual drivers
to do it.
- Same for color encoding and color range props.
- Update panic handling todo doc.
- Add todo that format conversion helpers should be sped up similarly to fbdev ops.
Driver Changes:
- Add panel orientation property to simpledrm for quirked panels.
- Assorted small fixes to tiny/repaper, nouveau, stm, omap, ssd130x.
- Add crc support to stm/ltdc.
- Add MIPI DBI compatible SPI driver
- Assorted small fixes to tiny panels and bridge drivers.
- Add AST2600 support to aspeed.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/48fabd78-ade9-f80b-c724-13726c7be69e@linux.intel.com
This contains a couple more minor fixes that didn't seem urgent enough
for v5.17. On top of that this improves YUV format support on older
chips.
-----BEGIN PGP SIGNATURE-----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=gvtK
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.18-rc1' of https://gitlab.freedesktop.org/drm/tegra into drm-next
drm/tegra: Changes for v5.18-rc1
This contains a couple more minor fixes that didn't seem urgent enough
for v5.17. On top of that this improves YUV format support on older
chips.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301124426.1207653-1-thierry.reding@gmail.com
On Gen3 hardware enabling a VSP plane doesn't change any register that
requires DRES to take effect. Avoid a group restart in that case.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
The VSP1 sink selection through register DEFR8 is only available on Gen2
hardware. Skip it on Gen3.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
The rcar-du driver goes to great lengths to preserve device tree
backward compatibility for the LVDS encoders by patching old device
trees at runtime.
The last R-Car Gen2 platform was converted to the new bindings commit
edb0c3affe ("ARM: dts: r8a7793: Convert to new LVDS DT bindings"),
in v4.17, and the last RZ/G1 platform converted in commit
6a6a797625 ("ARM: dts: r8a7743: Convert to new LVDS DT bindings"),
in v5.0. Both are older than commit 58256143cf ("clk: renesas:
Remove R-Car Gen2 legacy DT clock support"), in v5.5, which removes
support for legacy bindings for clocks. The LVDS compatibility code is
thus not needed anymore. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
The M3-W+ SoC has the same LVDS encoder as other R-Car Gen3 chips.
Add support for M3-W+ (R8A77961) SoC to the LVDS encoder driver.
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Pointer mode is being assigned a value that is never read, it is
being re-assigned later with a new value. The initialization is
redundant and can be removed.
Cleans up clang scan build warning:
drivers/gpu/drm/solomon/ssd130x.c:582:27: warning: Value stored
to 'mode' during its initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302175309.1098827-1-colin.i.king@gmail.com
Add a TODO item for optimizing blitting and format-conversion helpers
in DRM and fbdev. There's always demand for faster graphics output.
v4:
* fix typos (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223193804.18636-6-tzimmermann@suse.de
Improve the performance of cfb_imageblit() by manually unrolling
the inner blitting loop and moving some invariants out. The compiler
failed to do this automatically. This change keeps cfb_imageblit()
in sync with sys_imagebit().
A microbenchmark measures the average number of CPU cycles
for cfb_imageblit() after a stabilizing period of a few minutes
(i7-4790, FullHD, simpledrm, kernel with debugging).
cfb_imageblit(), new: 15724 cycles
cfb_imageblit(): old: 30566 cycles
In the optimized case, cfb_imageblit() is now ~2x faster than before.
v3:
* fix commit description (Pekka)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223193804.18636-5-tzimmermann@suse.de
Improve the performance of sys_imageblit() by manually unrolling
the inner blitting loop and moving some invariants out. The compiler
failed to do this automatically. The resulting binary code was even
slower than the cfb_imageblit() helper, which uses the same algorithm,
but operates on I/O memory.
A microbenchmark measures the average number of CPU cycles
for sys_imageblit() after a stabilizing period of a few minutes
(i7-4790, FullHD, simpledrm, kernel with debugging). The value
for CFB is given as a reference.
sys_imageblit(), new: 25934 cycles
sys_imageblit(), old: 35944 cycles
cfb_imageblit(): 30566 cycles
In the optimized case, sys_imageblit() is now ~30% faster than before
and ~20% faster than cfb_imageblit().
v2:
* move switch out of inner loop (Gerd)
* remove test for alignment of dst1 (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223193804.18636-3-tzimmermann@suse.de
Improve the performance of sys_fillrect() by using word-aligned
32/64-bit mov instructions. While the code tried to implement this,
the compiler failed to create fast instructions. The resulting
binary instructions were even slower than cfb_fillrect(), which
uses the same algorithm, but operates on I/O memory.
A microbenchmark measures the average number of CPU cycles
for sys_fillrect() after a stabilizing period of a few minutes
(i7-4790, FullHD, simpledrm, kernel with debugging). The value
for CFB is given as a reference.
sys_fillrect(), new: 26586 cycles
sys_fillrect(), old: 166603 cycles
cfb_fillrect(): 41012 cycles
In the optimized case, sys_fillrect() is now ~6x faster than before
and ~1.5x faster than the CFB implementation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223193804.18636-2-tzimmermann@suse.de
Registers that exist in the shared render/compute reset domain need to
be placed on an engine workaround list to ensure that they are properly
re-applied whenever an RCS or CCS engine is reset. We have a number of
workarounds (updating registers MLTICTXCTL, L3SQCREG1_CCS0,
GEN12_MERT_MOD_CTRL, and GEN12_GAMCNTRL_CTRL) that are incorrectly
implemented on the 'gt' workaround list and need to be moved
accordingly.
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.s@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-14-matthew.d.roper@intel.com
Additional workarounds are required once we start exposing CCS engines.
Note that we have a number of workarounds that update registers in the
shared render/compute reset domain. Historically we've just added such
registers to the RCS engine's workaround list. But going forward we
should be more careful to place such workarounds on a wa_list for an
engine that definitely exists and is not fused off (e.g., a platform
with no RCS would never apply the RCS wa_list). We'll keep
rcs_engine_wa_init() focused on RCS-specific workarounds that only need
to be applied if the RCS engine is present. A separate
general_render_compute_wa_init() function will be used to define
workarounds that touch registers in the shared render/compute reset
domain and that we need to apply regardless of what render and/or
compute engines actually exist. Any workarounds defined in this new
function will internally be added to the first present RCS or CCS
engine's workaround list to ensure they get applied (and only get
applied once rather than being needlessly re-applied several times).
Co-author: Srinivasan Shanmugam
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-13-matthew.d.roper@intel.com
HW resources are divided across the active CCS engines at the compute
slice level, with each CCS having priority on one of the cslices.
If a compute slice has no enabled DSS, its paired compute engine is not
usable in full parallel execution because the other ones already fully
saturate the HW, so consider it fused off.
v2 (José):
- moved it to its own function
- fixed definition of ccs_mask
v3 (Matt):
- Replace fls() condition with a simple IP version test
v4 (Matt):
- Don't try to calculate a ccs_mask using
intel_slicemask_from_dssmask() until we've determined that we're
running on an Xe_HP platform where the logic makes sense (and won't
overflow).
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302052008.1884985-1-matthew.d.roper@intel.com
A different emit breadcrumbs ring programming is required for compute /
render and we don't have UMD user so just reject parallel submission for
these engine classes.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-11-matthew.d.roper@intel.com
Tell GuC that CCS is enabled by setting the CCS mask in its ADS.
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Original-author: Michel Thierry
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-10-matthew.d.roper@intel.com
We have to specify in the Render Control Unit Mode register
when CCS is enabled.
v2:
- Move RCU_MODE programming to a helper function. (Tvrtko)
- Clean up and clarify comments. (Tvrtko)
- Add RCU_MODE to the GuC save/restore list. (Daniele)
v3:
- Move this patch before the GuC ADS update to enable compute engines;
the definition of RCU_MODE and its insertion into the save/restore
list moves to this patch. (Daniele)
v4:
- Call xehp_enable_ccs_engines() directly in guc_resume() and
execlists_resume() rather than adding an extra layer of wrapping to
the engine->resume() vfunc. (Umesh)
Bspec: 46034
Original-author: Michel Thierry
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302001554.1836066-1-matthew.d.roper@intel.com
In Dual Context mode the EUs are shared between render and compute
command streamers. The hardware provides a field in the lrc descriptor
to indicate the prioritization of the thread dispatch associated to the
corresponding context.
The context priority is set to 'low' at creation time and relies on the
existing context priority to set it to low/normal/high.
Bspec: 46145, 46260
Original-author: Michel Thierry
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Prasad Nallani <prasad.nallani@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-8-matthew.d.roper@intel.com
The compute engine handles the same commands the render engine can
(except 3D pipeline), so it makes sense that CCS is more similar to RCS
than non-render engines.
The CCS context state (lrc) is also similar to the render one, so reuse
it. Note that the compute engine has its own CTX_R_PWR_CLK_STATE
register.
In order to avoid having multiple RCS && CCS checks, add the following
engine flag:
- I915_ENGINE_HAS_RCS_REG_STATE - use the render (larger) reg state ctx.
BSpec: 46260
Original-author: Michel Thierry
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-6-matthew.d.roper@intel.com
CCS will reuse the RCS functions for breadcrumb and flush emission.
However, CCS pipe_control has additional programming restrictions:
- Command Streamer Stall Enable must be always set
- Post Sync Operations must not be set to Write PS Depth Count
- 3D-related bits must not be set
v2:
- Drop unwanted blank line. (Lucas)
Bspec: 47112
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-5-matthew.d.roper@intel.com
Add execlists and GuC interrupts for compute CS into existing IRQ handlers.
All compute command streamers belong to the same compute class, so the
only change needed to enable their interrupts is to program their GT engine
interrupt mask registers.
CCS0 shares the register with CCS1, while CCS2 and CCS3 are in a new one.
BSpec: 50844, 54029, 54030, 53223, 53224.
Original-author: Michel Thierry
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-4-matthew.d.roper@intel.com
The reset domain is shared between render and all compute engines,
so resetting one will affect the others.
Note: Before performing a reset on an RCS or CCS engine, the GuC will
attempt to preempt-to-idle the other non-hung RCS/CCS engines to avoid
impacting other clients (since some shared modules will be reset). If
other engines are executing non-preemptable workloads, the impact is
unavoidable and some work may be lost.
Bspec: 52549
Original-author: Michel Thierry
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-3-matthew.d.roper@intel.com
Introduce a Compute Command Streamer (CCS), which has access to
the media and GPGPU pipelines (but not the 3D pipeline).
To begin with, define the compute class/engine common functions, based
on the existing render ones.
v2:
- Add kerneldoc for drm_i915_gem_engine_class since we're adding a new
element to it. (Daniel)
- Make engine class <-> guc class converters use lookup tables to make
it more clear/explicit how the IDs map. (Tvrtko)
v3:
- Don't update uapi for now; we'll just include the driver-internal
changes for the time being.
Bspec: 46167, 45544
Original-author: Michel Thierry
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-2-matthew.d.roper@intel.com
For spdx
change tab to space delimiter
Use // for *.c
Replacements
commited to committed
regsiters to registers
initialze to initialize
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302124535.358060-1-trix@redhat.com
If the previous transfer didn't end with a command without DP_AUX_I2C_MOT,
the next read trasnfer will miss the first byte. But if the command in
previous transfer is requested with length 0, it's a no-op to anx7625
since it can't process this command. anx7625 requires the last command
to be read command with length > 0.
It's observed that if we clear the DP_AUX_I2C_MOT in read transfer, we
can still get correct data. Clear the read commands with DP_AUX_I2C_MOT
bit to fix this issue.
Fixes: adca62ec37 ("drm/bridge: anx7625: Support reading edid through aux channel")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Xin Ji <xji@analogixsemi.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217082224.1823916-1-hsinyi@chromium.org
There are a few sections in the driver which are not compatible with
PREEMPT_RT. They trigger warnings and can lead to deadlocks at runtime.
Disable the i915 driver on a PREEMPT_RT enabled kernel. This way
PREEMPT_RT itself can be enabled without needing to address the i915
issues first. The RT related patches are still in RT queue and will be
handled later.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YgqmfKhwU5spS069@linutronix.de
Remove redundant error message (since now it is very similar to what
we do in drm_sched_init) and centralize all error handling in a
unique place, as we follow the same steps in any case of failure.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220228181647.3794298-1-mwen@igalia.com
It is possible for reset notifications to arrive for a context that is
in the process of being banned. So don't flag these as an error, just
report it as informational (because it is still useful to know that
resets are happening even if they are being ignored).
v2: Better wording for the message (review feedback from Tvrtko).
v3: Fix rebase issue (review feedback from Daniele).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225015232.1939497-1-John.C.Harrison@Intel.com
Move initialization of submission-related spinlock, lists and workers to
init_early. This fixes an issue where if the GuC init fails we might
still try to get the lock in the context cleanup code. Note that it is
safe to call the GuC context cleanup code even if the init failed
because all contexts are initialized with an invalid GuC ID, which will
cause the GuC side of the cleanup to be skipped, so it is easier to just
make sure the variables are initialized than to special case the cleanup
to handle the case when they're not.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/4932
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215011123.734572-1-daniele.ceraolospurio@intel.com
A flag query helper was actually writing to the flags word rather than
just reading. Fix that. Also update the function's comment as it was
out of date.
NB: No need for a 'Fixes' tag. The test was only ever used inside a
BUG_ON during context registration. Rather than asserting that the
condition was true, it was making the condition true. So, in theory,
there was no consequence because we should never have hit a BUG_ON
anyway. Which means the write should always have been a no-op.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217212942.629922-1-John.C.Harrison@Intel.com
The function "drm_of_find_panel_or_bridge" has been deprecated in
favor of "devm_drm_of_get_bridge".
Switch to the new function and reduce boilerplate.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221074224.12920-1-jose.exposito89@gmail.com
The NV12, NV21, NV16, NV61, NV24 and NV42 formats are supported by
Tegra114 and later display hardware. Add the necessary programming to
allow them to be used.
Note that this does not work for Tegra186 and later yet because those
generations have a different display architecture that doesn't support
the same formats.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use the correct pitch when programming the DC_WIN_PLANAR_STORAGE_UV
register's PITCH_U field to ensure the correct value is used in all
cases. This isn't currently causing any problems because the pitch
for both U and V planes is always the same.
Signed-off-by: Thierry Reding <treding@nvidia.com>
