It's better to use __func__ than a fixed string to print a function's
name.
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix following format issues:
1. open brace '{' following function definitions should go to the next
line.
2. braces {} are not necessary for single line statements.
3. else should follow close brace '}'.
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are some space related issues, including spaces at the start of the
line, before tabs, after open parenthesis and before close parenthesis.
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are some repeated words in some comments, they should be deleted.
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Block comments should not use a trailing */ on a separate line and every
line of a block comment should start with an '*'.
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a blank line after declarations, change the order of them and put the
assignments and declarations together.
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the explicit casts in the checksum complement functions
and pass the actual protocol specific headers instead.
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Function 'ipc_mmio_get_cp_version' is declared twice, so remove the
repeated declaration and wrong comments.
Cc: M Chetan Kumar <m.chetan.kumar@intel.com>
Cc: Intel Corporation <linuxwwan@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Forward supervision frames between redunant HSR ports. This was broken
in the last commit.
Fixes: 1a42624aec ("net: dsa: xrs700x: allow HSR/PRP supervision dupes for node_table")
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The idiomatic way to handle the changelink flags/mask pair seems to be
allow partial updates of the driver's link flags. In contrast the rmnet
driver masks the incoming flags and then use that as the new flags.
Change the rmnet driver to follow the common scheme, before the
introduction of IFLA_RMNET_FLAGS handling in iproute2 et al.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't check the sequence number when deciding when to update time_in in
the node table if tag removal is offloaded since the sequence number is
part of the tag. This fixes a problem where the times in the node table
wouldn't update when 0 appeared to be before or equal to seq_out when
tag removal was offloaded.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 2bb4b98b60 ("net: stmmac: Add Ingenic SoCs MAC support.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using eth_zero_addr() to assign zero address insetad of
inefficient copy from an array.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peng Li says:
====================
net: cosa: clean up some code style issues
This patchset clean up some code style issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the chackpatch.pl,
no spaces is necessary at the start of a line,
no space is necessary after a cast.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes trailing whitespaces.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add space required before the open parenthesis '(' and '{'.
Add space required after that close brace '}' and ','
Add spaces required around that '=' , '&', '*', '|', '+', '/' and '-'.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Trailing statements should be on next line.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alignment should match open parenthesis.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch uses the BIT macro for setting individual bits,
to fix the following checkpatch.pl issue:
CHECK: Prefer using the BIT macro.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Macro argument 'cosa' may be better as '(cosa)' to avoid
precedence issues.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes redundant braces {}, to fix the
checkpatch.pl warning:
"braces {} are not necessary for single statement blocks".
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Braces {} should be used on all arms of this statement.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Networking block comments don't use an empty /* line,
use /* Comment...
Block comments use * on subsequent lines.
Block comments use a trailing */ on a separate line.
This patch fixes the comments style issues.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Should not use assignment in if condition.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the chackpatch.pl, comparison to NULL could
be written "!chan->rx_skb".
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the checkpatch error as "foo* bar" should be "foo *bar".
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the checkpatch error about missing a blank line
after declarations.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes some redundant blank lines.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert list_for_each() to list_for_each_entry() where
applicable. This simplifies the code.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There has been a few errors in the ethtool reply size calculations,
most of those are hard to trigger during basic testing because of
skb size rounding up and netdev names being shorter than max.
Add a more precise check.
This change will affect the value of payload length displayed in
case of -EMSGSIZE but that should be okay, "payload length" isn't
a well defined term here.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Timewait sockets have included mark since approx 4.18.
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jon Maxwell <jmaxwell37@gmail.com>
Fixes: 0048369055 ("tcp: Add mark for TIMEWAIT sockets")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jon Maxwell <jmaxwell37@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This symbol is not used outside of net.c, so marks it static.
Fix the following sparse warning:
drivers/net/mhi/net.c:385:23: warning: symbol 'mhi_wwan_ops' was not
declared. Should it be static?
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang says:
====================
net: hns3: updates for -next
This series includes some optimization in IO path for the HNS3 ethernet
driver.
====================
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently rx page will be reused to receive future packet when
the stack releases the previous skb quickly. If the old page
can not be reused, a new page will be allocated and mapped,
which comsumes a lot of cpu when IOMMU is in the strict mode,
especially when the application and irq/NAPI happens to run on
the same cpu.
So allocate a new frag to memcpy the data to avoid the costly
IOMMU unmapping/mapping operation, and add "frag_alloc_err"
and "frag_alloc" stats in "ethtool -S ethX" cmd.
The throughput improves above 50% when running single thread of
iperf using TCP when IOMMU is in strict mode and iperf shares the
same cpu with irq/NAPI(rx_copybreak = 2048 and mtu = 1500).
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current rx page offset only reset to zero when all the below
conditions are satisfied:
1. rx page is only owned by driver.
2. rx page is reusable.
3. the page offset that is above to be given to the stack has
reached the end of the page.
If the page offset is over the hns3_buf_size(), it means the
buffer below the offset of the page is usable when the above
condition 1 & 2 are satisfied, so page offset can be reset to
zero instead of increasing the offset. We may be able to always
reuse the first 4K buffer of a 64K page, which means we can
limit the hot buffer size as much as possible.
The above optimization is a side effect when refacting the
rx page reuse handling in order to support the rx copybreak.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using the queue based tx buffer, it is also possible to allocate a
sgl buffer, and use skb_to_sgvec() to convert the skb to the sgvec
in order to support the dma_map_sg() to decreases the overhead of
IOMMU mapping and unmapping.
Firstly, it reduces the number of buffers. For example, a tcp skb
may have a 66-byte header and 3 fragments of 4328, 32768, and 28064
bytes. With this patch, dma_map_sg() will combine them into two
buffers, 66-bytes header and one 65160-bytes fragment by using IOMMU.
Secondly, it reduces the number of dma mapping and unmapping. All the
original 4 buffers are mapped only once rather than 4 times.
The throughput improves above 10% when running single thread of iperf
using TCP when IOMMU is in strict mode.
Suggested-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to query tx spare buffer size from configuration
file, and use this info to do spare buffer initialization when
the module parameter 'tx_spare_buf_size' is not specified.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
when the packet or frag size is small, it causes both security and
performance issue. As dma can't map sub-page, this means some extra
kernel data is visible to devices. On the other hand, the overhead
of dma map and unmap is huge when IOMMU is on.
So add a queue based tx shared bounce buffer to memcpy the small
packet when the len of the xmitted skb is below tx_copybreak.
Add tx_spare_buf_size module param to set the size of tx spare
buffer, and add set/get_tunable to set or query the tx_copybreak.
The throughtput improves from 30 Gbps to 90+ Gbps when running 16
netperf threads with 32KB UDP message size when IOMMU is in the
strict mode(tx_copybreak = 2000 and mtu = 1500).
Suggested-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Factor out hns3_fill_desc() so that it can be reused in the
tx bounce supporting.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
desc_cb is used to store mapping and freeing info for the
corresponding desc, which is used in the cleaning process.
There will be more desc_cb type coming up when supporting the
tx bounce buffer, change desc_cb type to bit-wise value in order
to reduce the desc_cb type checking operation in the data path.
Also move the desc_cb type definition to hns3_enet.h because it
is only used in hns3_enet.c, and declare a local variable desc_cb
in hns3_clear_desc() to reduce lines of code.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes .rst file warnings seen on linux-next build.
Fixes: f7af616c63 ("net: iosm: infrastructure")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The pointer dev can never be null, the null check is redundant
and can be removed. Cleans up a static analysis warning that
pointer priv is dereferencing dev before dev is being null
checked.
Addresses-Coverity: ("Dereference before null check")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The round-robin rr_tx_counter was shared across CPUs leading to
significant cache thrashing at high packet rates. This patch switches
the round-robin packet counter to use a per-cpu variable to decide
the destination slave.
On a test with 2x100Gbit ICE nic with pktgen_sample_04_many_flows.sh
(-s 64 -t 32) the tx rate was 19.6Mpps before and 22.3Mpps after
this patch.
"perf top -e cache_misses" before:
12.31% [bonding] [k] bond_xmit_roundrobin_slave_get
10.59% [sch_fq_codel] [k] fq_codel_dequeue
9.34% [kernel] [k] skb_release_data
after:
15.42% [sch_fq_codel] [k] fq_codel_dequeue
10.06% [kernel] [k] __memset
9.12% [kernel] [k] skb_release_data
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1) Trivial Lag refactroing in preparation for upcomming Single FDB lag feature
- First 3 patches
2) Scalable IRQ distriburion for Sub-functions
A subfunction (SF) is a lightweight function that has a parent PCI
function (PF) on which it is deployed.
Currently, mlx5 subfunction is sharing the IRQs (MSI-X) with their
parent PCI function.
Before this series the PF allocates enough IRQs to cover
all the cores in a system, Newly created SFs will re-use all the IRQs
that the PF has allocated for itself.
Hence, the more SFs are created, there are more EQs per IRQs. Therefore,
whenever we handle an interrupt, we need to pull all SFs EQs and PF EQs
instead of PF EQs without SFs on the system. This leads to a hard impact
on the performance of SFs and PF.
For example, on machine with:
Intel(R) Xeon(R) CPU E5-2697 v3 @ 2.60GHz with 56 cores.
PCI Express 3 with BW of 126 Gb/s.
ConnectX-5 Ex; EDR IB (100Gb/s) and 100GbE; dual-port QSFP28; PCIe4.0 x16.
test case: iperf TX BW single CPU, affinity of app and IRQ are the same.
PF only: no SFs on the system, 56 IRQs.
SF (before), 250 SFs Sharing the same 56 IRQs .
SF (now), 250 SFs + 255 avaiable IRQs for the NIC. (please see IRQ spread scheme below).
application SF-IRQ channel BW(Gb/sec) interrupts/sec
iperf TX affinity
PF only cpu={0} cpu={0} cpu={0} 79 8200
SF (before) cpu={0} cpu={0} cpu={0} 51.3 (-35%) 9500
SF (now) cpu={0} cpu={0} cpu={0} 78 (-2%) 8200
command:
$ taskset -c 0 iperf -c 11.1.1.1 -P 3 -i 6 -t 30 | grep SUM
The different between the SF examples is that before this series we
allocate num_cpus (56) IRQs, and all of them were shared among the PF
and the SFs. And after this series, we allocate 255 IRQs, and we spread
the SFs among the above IRQs. This have significantly decreased the load
on each IRQ and the number of EQs per IRQ is down by 95% (251->11).
In this patchset the solution proposed is to have a dedicated IRQ pool
for SFs to use. the pool will allocate a large number of IRQs
for SFs to grab from in order to minimize irq sharing between the
different SFs.
IRQs will not be requested from the OS until they are 1st requested by
an SF consumer, and will be eventually released when the last SF consumer
releases them.
For the detailed IRQ spread and allocation scheme please see last patch:
("net/mlx5: Round-Robin EQs over IRQs")
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmDIJUkACgkQSD+KveBX
+j7tgQf+KtxzniuEY+JgbGWWyQvglx88S6WfhTOhZZllm2QXa2wWX24mz/AdYc0x
QCT6yUzvaeaHPNpw/KwCw1IKpB9dlT+wIBD9NCEqtHqj+bVz+ioL/OlM5VJj+wC2
kp+EjYsQbwgZIM40JgLLu2uzLy/5w7a1v9Rj0l4mLRZqPmrqeKrIAsVkVutaxtPg
PtECBag4XtYERMXOfKohnXanwjW6ZyYQ0Yal76jNqoXXgy5dHr/JJDZQZTDURt7S
3ex0gwTZwHfOLFQdRzD+U0kuC2/6sHMfeVrKO6QxuG/gihYe8FXEQ4qVSJmgXANP
VH6n1Vk5IhaMzYKfGFb2OGOWanAVIA==
=z0x7
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2021-06-14' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2021-06-14
1) Trivial Lag refactroing in preparation for upcomming Single FDB lag feature
- First 3 patches
2) Scalable IRQ distriburion for Sub-functions
A subfunction (SF) is a lightweight function that has a parent PCI
function (PF) on which it is deployed.
Currently, mlx5 subfunction is sharing the IRQs (MSI-X) with their
parent PCI function.
Before this series the PF allocates enough IRQs to cover
all the cores in a system, Newly created SFs will re-use all the IRQs
that the PF has allocated for itself.
Hence, the more SFs are created, there are more EQs per IRQs. Therefore,
whenever we handle an interrupt, we need to pull all SFs EQs and PF EQs
instead of PF EQs without SFs on the system. This leads to a hard impact
on the performance of SFs and PF.
For example, on machine with:
Intel(R) Xeon(R) CPU E5-2697 v3 @ 2.60GHz with 56 cores.
PCI Express 3 with BW of 126 Gb/s.
ConnectX-5 Ex; EDR IB (100Gb/s) and 100GbE; dual-port QSFP28; PCIe4.0 x16.
test case: iperf TX BW single CPU, affinity of app and IRQ are the same.
PF only: no SFs on the system, 56 IRQs.
SF (before), 250 SFs Sharing the same 56 IRQs .
SF (now), 250 SFs + 255 avaiable IRQs for the NIC. (please see IRQ spread scheme below).
application SF-IRQ channel BW(Gb/sec) interrupts/sec
iperf TX affinity
PF only cpu={0} cpu={0} cpu={0} 79 8200
SF (before) cpu={0} cpu={0} cpu={0} 51.3 (-35%) 9500
SF (now) cpu={0} cpu={0} cpu={0} 78 (-2%) 8200
command:
$ taskset -c 0 iperf -c 11.1.1.1 -P 3 -i 6 -t 30 | grep SUM
The different between the SF examples is that before this series we
allocate num_cpus (56) IRQs, and all of them were shared among the PF
and the SFs. And after this series, we allocate 255 IRQs, and we spread
the SFs among the above IRQs. This have significantly decreased the load
on each IRQ and the number of EQs per IRQ is down by 95% (251->11).
In this patchset the solution proposed is to have a dedicated IRQ pool
for SFs to use. the pool will allocate a large number of IRQs
for SFs to grab from in order to minimize irq sharing between the
different SFs.
IRQs will not be requested from the OS until they are 1st requested by
an SF consumer, and will be eventually released when the last SF consumer
releases them.
For the detailed IRQ spread and allocation scheme please see last patch:
("net/mlx5: Round-Robin EQs over IRQs")
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Subbaraya Sundeep says:
====================
octeontx2: Add ingress ratelimit offload
This patchset adds ingress rate limiting hardware
offload support for CN10K silicons. Police actions
are added for TC matchall and flower filters.
CN10K has ingress rate limiting feature where
a receive queue is mapped to bandwidth profile
and the profile is configured with rate and burst
parameters by software. CN10K hardware supports
three levels of ingress policing or ratelimiting.
Multiple leaf profiles can point to a single mid
level profile and multiple mid level profile can
point to a single top level one. Only leaf level
profiles are used for configuring rate limiting.
Patch 1 adds the new bandwidth profile contexts
in AF driver similar to other hardware contexts
Patch 2 adds the debugfs changes to dump bandwidth
profile contexts
Patch 3 adds support for police action with TC matchall filter
Patch 4 uses NL_SET_ERR_MSG_MOD for tc code
Patch 5 adds support for police action with TC flower filter
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
