The TLB on GFX8 stores each block of 8 PTEs where any of the valid bits
are set.
Fixes: 5255e146c9 ("drm/amdgpu: rework TLB flushing")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The job is not yet initialized here.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2037
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: cdc7893fc9 ("drm/amdgpu: use job and ib structures directly in CS parsers")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All other chips, from gfx6-gfx10, now include the MODE register at the
end of the wave debug state. This appears to have been missed in gfx11,
so this patch adds in MODE to the debug state for gfx11.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 8440f57532.
Causes a hang when hotplugging DP, shutting down system, or
enabling dual eDP.
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit b992a19085.
This causes regression in GPU reset related test.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: ricetons@gmail.com
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Suppress the compile warning below:
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:1292
gfx_v11_0_rlc_backdoor_autoload_copy_ucode() warn: should '1 << id' be a 64 bit type?
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Suppress the following compile warnings:
>> drivers/gpu/drm/amd/amdgpu/../pm/swsmu/inc/smu_v11_0_pptable.h:163:17:
warning: field smc_pptable within 'struct smu_11_0_powerplay_table' is
less aligned than 'PPTable_t' and is usually due to 'struct smu_11_0_powerplay_table'
being packed, which can lead to unaligned accesses [-Wunaligned-access]
PPTable_t smc_pptable; //PPTable_t in smu11_driver_if.h
^
1 warning generated.
--
>> drivers/gpu/drm/amd/amdgpu/../pm/swsmu/inc/smu_v11_0_7_pptable.h:193:17:
warning: field smc_pptable within 'struct smu_11_0_7_powerplay_table' is
less aligned than 'PPTable_t' and is usually due to 'struct smu_11_0_7_powerplay_table'
being packed, which can lead to unaligned accesses [-Wunaligned-access]
PPTable_t smc_pptable; //PPTable_t in smu11_driver_if.h
^
1 warning generated.
--
>> drivers/gpu/drm/amd/amdgpu/../pm/swsmu/inc/smu_v13_0_pptable.h:161:12:
warning: field smc_pptable within 'struct smu_13_0_powerplay_table' is less aligned than
'PPTable_t' and is usually due to 'struct smu_13_0_powerplay_table' being packed, which
can lead to unaligned accesses [-Wunaligned-access]
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Migration range from system memory to VRAM, if system page can not be
locked or unmapped, we do partial migration and leave some pages in
system memory. Several bugs found to copy pages and update GPU mapping
for this situation:
1. copy to vram should use migrate->npage which is total pages of range
as npages, not migrate->cpages which is number of pages can be migrated.
2. After partial copy, set VRAM res cursor as j + 1, j is number of
system pages copied plus 1 page to skip copy.
3. copy to ram, should collect all continuous VRAM pages and copy
together.
4. Call amdgpu_vm_update_range, should pass in offset as bytes, not
as number of pages.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The kfd_bo_list is used to restore process BOs after
evictions. As page tables could be destroyed during
evictions, we should also update pinned BOs' page tables
during restoring to make sure they are valid.
So for pinned BOs,
1, Validate them and update their page tables.
2, Don't add eviction fence for them.
v2:
- Don't handle pinned ones specially in BO validation.(Felix)
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Flush TLBs when existing PDEs are updated because a PTB or PDB moved,
but avoids unnecessary TLB flushes when new PDBs or PTBs are added to
the page table, which commonly happens when memory is mapped for the
first time.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add IP GC 10.3.7 in the list of target to have
tmz enabled by default.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.18.x
Loading amdgpu on GC 10.3.7 shows an ERR level message:
`kfd kfd: amdgpu: GC IP 0a0307 not supported in kfd`
Add these targets to match yellow carp structures.
Reported-by: David Chang <david.chang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Jesse(Jie) Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.18.x
MMU notifier callback may pass in mm with mm->mm_users==0 when process
is exiting, use mmget_no_zero to avoid accessing invalid mm in deferred
list work after mm is gone.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adjust the sequence for ras late init and separate ras reset error status
from query status.
v2: squash in fix from Candice
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This code should be executed.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This symbol is not used outside of gfx_v11_0.c, so marks it static.
Fixes the following w1 warning:
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:1945:6: warning: no previous
prototype for function 'gfx_v11_0_rlc_stop' [-Wmissing-prototypes].
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following w1 warning:
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:5873:2: warning: unannotated
fall-through between switch labels [-Wimplicit-fallthrough].
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Wrong fb offset results in dmub f/w errors and white screen.
[drm:dc_dmub_srv_wait_idle [amdgpu]] *ERROR* Error waiting for DMUB idle: status=3
[How]
Read aper_base from mmhub because GC is off by default
v2: use BAR for passthrough (Alex)
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Supports AV1. Mesa already has support for this and
doesn't rely on the kernel caps for yellow carp, so
this was already working from an application perspective.
Fixes: 554398174d ("amdgpu/nv.c - Added video codec support for Yellow Carp")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2002
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This symbol is not used outside of imu_v11_0.c, so marks it
static.
Fixes the following w1 warning:
drivers/gpu/drm/amd/amdgpu/imu_v11_0.c:302:6: warning: no previous
prototype for ‘program_imu_rlc_ram’ [-Wmissing-prototypes].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following fixes:
* Changes to DP LT fallback behavior to more closely match the DP standard
* Added new interfaces for lut pipeline
* Restore ref_dtblck value when clk struct is cleared in init_clocks
* Fixes DMUB outbox trace in S4
* Fixes lingering DIO FIFO errors when DIO no longer enabled
* Reads Golden Settings Table from VBIOS
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
It's possible for some fallback scenarios to result in infinite looping
during link training.
[How]
This change modifies DP LT fallback behavior to more closely match the
DP standard. Keep track of the link rate during the EQ_FAIL fallback,
and use it as the maximum link rate for the CR sequence.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Ilya <Ilya.Bakoulin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
ref_dtbclk value is assigned in clk_mgr_construct,
but the clks struct is cleared in init_clocks.
Make sure to restore the value or we will get
0 value for ref_dtbclk in DCN31.
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DMUB Outbox0 read/write pointer not sync after resumed from S4.
And that caused old traces were sent to outbox.
[How]
Disable DMUB Outbox0 interrupt
and clear DMUB Outbox0 read/write pointer when resumes from S4.
And then enable Outbox0 interrupt before starts DMCUB.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Very low rate to cause memory access issue while resetting
DMCUB after the halt command was sent to it.
The process of stopping fw of DMCUB may be timeout, that means
it is not in idle state, such as the window frames may still be
kept in cache, so reset by force will cause MMHUB hang.
[HOW]
After the halt command was sent, keep checking the DMCUB state until
it is idle.
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: hengzhou <Hengyong.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When enabling an HPO stream for the first time after having previously
enabled a DIO stream there may be lingering DIO FIFO errors even though
the DIO is no longer enabled.
These can cause display clock change to hang if we don't apply the
OTG disable workaround since the ramping logic is tied to OTG on.
[How]
The workaround wasn't being applied in the sequence of:
1 DIO stream
0 streams
1 HPO stream
because current_state has no stream or planes in its context - and
it's only swapped after optimize has finished.
We should be using the incoming context instead to determine whether
this logic is needed or not.
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
why and how:
Revert this change. It was causing a black screen with certain blocks
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Leung, Martin <Martin.Leung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Dmub read AUX_DPHY_RX_CONTROL0 from Golden Setting Table,
but driver will set it to default value 0x103d1110, which
causes issue in some case
[How]
Remove the driver code, use the value set by dmub in
dp_aux_init
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Sherry Wang <YAO.WANG1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is enough to get gputop working :)
v2: rebase and some addition cleanup
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert fdinfo format to one documented in drm-usage-stats.rst.
It turned out that the existing implementation was actually completely
nonsense. The calculated percentages indeed represented the usage of the
engine, but with varying time slices.
So 10% usage for application A could mean something completely different
than 10% usage for application B.
Completely nuke that and just use the now standardized nanosecond
interface.
v2: drop the documentation change for now, nuke percentage calculation
v3: only account for each hw_ip, move the time_spend to the ctx mgr.
v4: move general ctx changes into separate patch, rework the fdinfo to
ctx_mgr interface so that all usages are calculated at once, drop
some unecessary and dangerous refcount dance.
v5: add one more comment how we calculate the time spend
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Increase the minor version number to indicate that the new flags are
available.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the AMDGPU_VM_NOALLOC flag to let userspace control MALL allocation.
v2: also add the flag to the allowed flags.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a AMDGPU_GEM_CREATE_DISCARDABLE flag to note that the content of a BO
doesn't needs to be preserved during eviction.
KFD was already using a similar functionality for SVM BOs so replace the
internal flag with the new UAPI.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When powerplay is not enabled, return AUTO as default level.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Spelling mistakes (triple letters) in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some applications want to know whether the memory is LP or
not.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check shared buf instead of init flag for xgmi ta shared buf init
during xgmi ta initialization.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On the psp13 series use ta_firmware_header_v2_0 and the asd firmware
was buildin ta, so needn't request asd firmware separately.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Validate the VCN and SDMA instances against the driver
structure sizes to make sure we don't get into a
situation where the firmware reports more instances than
the driver supports.
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
According to the KMS man page, there is a
"Coverage" alpha blend mode that assumes the
pixel color values have NOT been pre-multiplied
and will be done when the actual blending to
the background color values happens.
Previously, this mode hasn't been enabled
in our driver and it was assumed that all
normal overlay planes are pre-multiplied
by default.
When a 3rd party app is used to input a image
in a specific format, e.g. PNG, as a source
of a overlay plane to blend with the background
primary plane, the pixel color values are not
pre-multiplied. So by adding "Coverage" blend
mode, our driver will support those cases.
Issue fixed: Overlay plane alpha channel blending is incorrect
Issue tracker: https://gitlab.freedesktop.org/drm/amd/-/issues/1769
Reference:
https://dri.freedesktop.org/docs/drm/gpu/drm-kms.html#plane-composition-properties
Adding Coverage support also enables IGT
kms_plane_alpha_blend Coverage subtests:
1. coverage-7efc
2. coverage-vs-premult-vs-constant
Changes
1. Add DRM_MODE_BLEND_COVERAGE blend mode capability
2. Add "pre_multiplied_alpha" flag for Coverage case
3. Read the correct flag and set the DCN MPCC
pre_multiplied register bit (only on overlay plane)
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1769
Signed-off-by: Sung Joon Kim <Sungjoon.Kim@amd.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The > ARRAY_SIZE() should be >= ARRAY_SIZE() to prevent an out of bounds
access.
Fixes: e27c41d5b0 ("drm/amd/display: Support for DMUB HPD interrupt handling")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
