SetPageDirty() and ClearPageDirty() are low-level thing which filesystems
shouldn't be using. They bypass dirty page accounting.
Cc: David Woodhouse <dwmw2@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The VM layer (for historical reasons) turns a read-only shared mmap into
a private-like mapping with the VM_MAYWRITE bit clear. Thus checking
just VM_SHARED isn't actually sufficient.
So use a trivial helper function for the cases where we wanted to inquire
if a mapping was COW-like or not.
Moo!
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
With the previous commit, we can handle arbitrary shared re-mappings
even without this complexity, and since the only known private mappings
are for strange users of /dev/mem (which never create an incomplete one),
there seems to be no reason to support it.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
A shared mapping doesn't cause COW-pages, so we don't need to worry
about the whole vm_pgoff logic to decide if a PFN-remapped page has
gone through COW or not.
This makes it possible to entirely avoid the special "partial remapping"
logic for the common case.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ppc32 kernel, when built with CONFIG_SMP and booted on a single CPU
machine, will not properly set smp_tb_synchronized, thus causing
gettimeofday() to not use the HW timebase and to be limited to jiffy
resolution. This, among others, causes unacceptable pauses when launching
X.org.
Signed-Off-By: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
The code that sets the clock spreading feature of the Intrepid ASIC
must not be run on some machine models or those won't boot. This
fixes it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
It is a simple bug which uses the wrong member.
This bug does not seriously affect ordinary use of IPsec.
But it is important to pass IPv6 ready logo phase-2
conformance test of IPsec SGW.
Signed-off-by: Kazunori MIYAZAWA <miyazawa@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
On ppc64, when opening a new hugepage region, we need to make sure any
old normal-page SLBs for the area are flushed on all CPUs. There was
a bug in this logic - after putting the new hugepage area masks into
the thread structure, we copied it into the paca (read by the SLB miss
handler) only on one CPU, not on all. This could cause incorrect SLB
entries to be loaded when a multithreaded program was running
simultaneously on several CPUs. This patch corrects the error,
copying the context information into the PACA on all CPUs using the mm
in question before flushing any existing SLB entries.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
On most powerpc CPUs, the dcache and icache are not coherent so
between writing and executing a page, the caches must be flushed.
Userspace programs assume pages given to them by the kernel are icache
clean, so we must do this flush between the kernel clearing a page and
it being mapped into userspace for execute. We were not doing this
for hugepages, this patch corrects the situation.
We use the same lazy mechanism as we use for normal pages, delaying
the flush until userspace actually attempts to execute from the page
in question.
Tested on G5.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cache info is setup by walking the device tree in initialize_cache_info().
However, icache_flush_range might be called before that, in
slb_initialize()->patch_slb_encoding, which modifies the load immediate
instructions used with SLB fault code.
Not only that, but depending on memory layout, we might take SLB faults
during unflatten_device_tree. So that fault will load an SLB entry that
might not contain the right LLP flags for the segment.
Either we can walk the flattened device tree to setup cache info, or
we can pick the known defaults that are known to work. Doing it in the
flattened device tree is hairier since we need to know the machine type
to know what property to look for, etc, etc.
For now, it's just easier to go with the defaults. Worst thing that
happens from it is that we might waste a few cycles doing too small
dcbst/icbi increments.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
model_id fields of wf_smu_sys_all_params should match the model ID
they are supposed to represent (as commented). Fixes windfarm on some
iMac 8,1 models.
Signed-off-by: Michal Ostrowski <mostrows at watson ibm com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
The problem I was seeing turned out to be that skb->dev is NULL when
the checksum is being completed in user context. This happens because
the reference to the device is dropped (to allow it to be released
when packets are in the queue).
Because skb->dev was NULL, the netdev_rx_csum_fault was panicing on
deref of dev->name. How about this?
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some debug code wasn't properly removed from the initial 64k pages
patch, and while it's harmless, it's also slowing down significantly a
very hot code path, thus it should really be removed.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
The 64k pages patch changed the meaning of one argument passed to the
low level hash functions (from "large" it became "psize" or page size
index), but one of the call sites wasn't properly updated, causing
potential random weird problems with huge pages. This fixes it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This bug exists in the current code and prevents machines from booting
with numa enabled if there is a node that does not contain memory.
Workaround is to boot with 'numa=off'. Looks like a simple typo.
Signed-off-by: Mike Kravetz <kravetz@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
[ Move assosciated code comment to the correct spot, and
update driver version and release date -DaveM ]
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
So we can properly use __GFP_COMP and avoid the use of
PG_reserved pages.
With extremely helpful review from Hugh Dickins.
Signed-off-by: David S. Miller <davem@davemloft.net>
We have to store the congestion control timestamp on the SKB before we
clone it, not after. Else we get no timestamping information at all.
tcp_transmit_skb() has been reworked so that we can do the timestamp
still in one spot, instead of at all the call sites.
Problem discovered, and initial fix, from Tom Young
<tyo@ee.unimelb.edu.au>.
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove unneeded call to tcp_vegas_rtt_calc. The more accurate
microsecond value has already been registered prior to calling
tcp_vegas_cong_avoid.
Signed-off-by: Thomas Young <tyo@ee.mu.oz.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the resetting of rtt measurements to inside the once per RTT
block of code.
Signed-off-by: Thomas Young <tyo@ee.mu.oz.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The patch (originally from Steve) simply adds memory buffer settings to
DECnet similar to those in TCP.
Signed-off-by: Patrick Caulfield <patrick@tykepenguin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a function takes a function pointer as argument it should use the 'return
(*pointer)(params...)' syntax used everywhere else in the kernel as this is
recognized by kernel-doc.
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
NFA_NEST calls NFA_PUT which jumps to nfattr_failure if the skb has no
room left. We call read_unlock_bh at nfattr_failure for the NFA_PUT inside
the locked section, so move NFA_NEST inside the locked section too.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Should have been marked EXPERIMENTAL from the beginning, as the current
bunch of fixes show.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
ip_conntrack_flush() used to be part of ip_conntrack_cleanup(), which needs
to drop _all_ references on module unload. Table flushed using ctnetlink
just needs to clean the table and doesn't need to flush the event cache or
wait for any references attached to skbs. Move everything but pure table
flushing back to ip_conntrack_cleanup().
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
At least, valid nfnetlink message should have nlmsghdr and nfgenmsg.
Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This makes nf_conntrack_icmpv6 check that ICMPv6 type isn't < 128
to avoid accessing out of array valid_new[] and invmap[].
Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
ip_nat_initialized() takes enum ip_nat_manip_type as it's second argument,
not a hook number.
Noticed and initial patch by Marcus Sundberg <marcus@ingate.com>.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's never been a hardware platform that has both pSeries/RPA LPAR
hypervisor and stab (pre-POWER4 segment management). This removes
the redundant code in stab_initalize().
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This reverts commit da0825fd20, making
it so that if you select CONFIG_PPC_MULTIPLATFORM you get support
for PMAC, PREP and CHRP built in.
The reason for not allowing PMAC, PREP and CHRP to be selected
individually for ARCH=ppc is that there is too much interdependency
between them in the platform support code. For example, CHRP uses
the PMAC nvram code.
Configuring with ARCH=powerpc does allow you to select support for
PMAC and CHRP separately. Support for PREP is not there yet but
should be there soon.
Signed-off-by: Paul Mackerras <paulus@samba.org>
The previous commit will use the page-at-a-time hypervisor call for
setting up IOMMU entries when we are using 64k pages and setting up
one 64k page, even though that means 16 calls to the hypervisor, since
the hypervisor still works on 4k pages. This optimizes this case by
using the multi-page IOMMU setup hypervisor call instead.
Signed-off-by: Paul Mackerras <paulus@samba.org>
- fix analog NTSC for pcHDTV 3000
- Fix regression: broken analog NTSC for DViCO FusionHDTV3 Gold-T
- add tda9887 to card struct, required for both cards.
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Hey, for no other reason than the fact that I'll be off-line for a
week.
Of course, I could force everybody to just use git (and when I'm emperor
of the world, don't think I won't!), but it seems some people want to
just test official releases. Even if they are just -rc's.
By the time I'm back, Andrew will have fixed all my bugs, and I'll
release it as 2.6.15 and take all the credit.
Mwahahahaaa
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We want to link the "regular" SCSI drivers before the USB storage
driver, since historically we've always detected internal SCSI disks
before the external USB storage modules.
The link order matters for initcall ordering, and this got broken by
mistake by commit 7586269c0b which moved
the USB host controller PCI quirk handling around.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It used to use remap_pfn_range(), which wasn't GPL-only either, and the
new interface is actually simpler and does more checking, so we
shouldn't unnecessarily discourage people from switching over.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The code to clamp batch sizes to 2^n - 1 went missing and an extra
check got added, which must have been a hunk of the "higer order pcp
batch refills" work sneaking in.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch makes ata_scsi_pass_thru() properly set result code and
sense data on translation failures.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
- Missing initialisation of attribute bitmask in _nfs4_proc_write()
- On success, _nfs4_proc_write() must return number of bytes written.
- Missing post_op_update_inode() in _nfs4_proc_write()
- Missing initialisation of attribute bitmask in _nfs4_proc_commit()
- Missing post_op_update_inode() in _nfs4_proc_commit()
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Ensure that we use set_page_writeback() in the appropriate places
to help the VM in keeping its page radix_tree in sync.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The elements on rpci->in_upcall are tracked by the filp->private_data,
which will ensure that they get released when the file is closed.
The exception is if rpc_close_pipes() gets called first, since that
sets rpci->ops to NULL.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Steve Dickson writes:
Doing the following:
1. On server:
$ mkdir ~/t
$ echo Hello > ~/t/tmp
2. On client, wait for a string to appear in this file:
$ until grep -q foo t/tmp ; do echo -n . ; sleep 1 ; done
3. On server, create a *new* file with the same name containing that
string:
$ mv ~/t/tmp ~/t/tmp.old; echo foo > ~/t/tmp
will show how the client will never (and I mean never ;-) ) see
the updated file.
The problem is that we do not update nfsi->cache_change_attribute when the
file changes on the server (we only update it when our client makes the
changes). This again means that functions like nfs_check_verifier() will
fail to register when the parent directory has changed and should trigger
a dentry lookup revalidation.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Make sure cache_change_attribute is initialized to jiffies
so when the mtime changes on directory, the directory
will be refreshed.
Signed-off by: Steve Dickson <steved@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
