Check cached firmware_flags to determine if gpu
virtualization is supported in vbios
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Judgement whether to add an sw ip according to the harvest info.
v2: fix indentation (Alex)
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename,
ras_hw_supported --> ras_hw_enabled, and
ras_features --> ras_enabled,
to show that ras_enabled is a subset of
ras_hw_enabled, which itself is a subset
of the ASIC capability.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove redundant ras->supported, as this value
is also stored in adev->ras_features.
Use adev->ras_features, as that supercedes "ras",
since the latter is its member.
The dependency goes like this:
ras <== adev->ras_features <== hw_supported,
and is read as "ras depends on ras_features, which
depends on hw_supported." The arrows show the flow
of information, i.e. the dependency update.
"hw_supported" should also live in "adev".
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change to 60s. This matches what we already do in virtualization.
Infinite timeout can lead to deadlocks in the kernel.
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable all ip's hw status to false before any hw_init.
Only set it to true until its hw_init is executed.
The old 5.9 branch has this change but somehow the 5.11 kernrel does
not have this fix.
Without this change, sriov tdr have gfx IB test fail.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Review-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c: In function ‘amdgpu_device_suspend’:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:3733:6: warning: variable ‘r’ set but not used [-Wunused-but-set-variable]
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mmhub ras is only avaiable in cerntain mmhub ip
generation.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get pf2vf msg info at it's earliest time so that
guest driver can use these info to decide whether
register indirect access enabled.
Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If reset handler is not implemented, reset error before proceeding.
Fixes issue with the following trace -
[ 106.508592] amdgpu 0000:b1:00.0: amdgpu: ASIC reset failed with error, -38 for drm dev, 0000:b1:00.0
[ 106.508972] amdgpu 0000:b1:00.0: amdgpu: GPU reset succeeded, trying to resume
[ 106.509116] [drm] PCIE GART of 512M enabled.
[ 106.509120] [drm] PTB located at 0x0000008000000000
[ 106.509136] [drm] VRAM is lost due to GPU reset!
[ 106.509332] [drm] PSP is resuming...
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-and-tested-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add aldebaran to devices which support recovery
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expose PG/CG set states functions for other clients
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This prefers reset control based handling if it's implemented
for a particular ASIC. If not, it takes the legacy path. It uses
the legacy method of preparing environment (job, scheduler tasks)
and restoring environment.
v2: remove unused variable (Alex)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previous tdr design treats the first job in job_timeout as the bad job.
But sometimes a later bad compute job can block a good gfx job and
cause an unexpected gfx job timeout because gfx and compute ring share
internal GC HW mutually.
[How]
This patch implements an advanced tdr mode.It involves an additinal
synchronous pre-resubmit step(Step0 Resubmit) before normal resubmit
step in order to find the real bad job.
1. At Step0 Resubmit stage, it synchronously submits and pends for the
first job being signaled. If it gets timeout, we identify it as guilty
and do hw reset. After that, we would do the normal resubmit step to
resubmit left jobs.
2. For whole gpu reset(vram lost), do resubmit as the old way.
v2: squash in build fix (Alex)
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following coccicheck warning:
drivers/gpu//drm/amd/amdgpu/amdgpu_ras.c:434:9-17: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_xgmi.c:220:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_xgmi.c:249:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/df_v3_6.c:208:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_psp.c:2973:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_vram_mgr.c:75:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_vram_mgr.c:112:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_vram_mgr.c:58:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_vram_mgr.c:93:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_vram_mgr.c:125:9-17: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_gtt_mgr.c:52:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_gtt_mgr.c:71:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_device.c:140:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_device.c:164:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_device.c:186:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_device.c:208:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_atombios.c:1916:8-16: WARNING:
use scnprintf or sprintf
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[what]
currently driver recover vram after full access, which may hit
a corner case that meanwhile another whole gpu reset may be
triggered by another VF, which will cause vram recover fail
then fail the whole device reset.
[how]
move the recover vram into full access. So another bad VF will
not disturb the recover sequence for this vf.
Signed-off-by: Horace Chen <horace.chen@amd.com>
Reviewed by: Monk.Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFX is in gfxoff mode during s0ix so we shouldn't need to
actually tear anything down and restore it.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We handle it properly within the CG/PG functions directly
now.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not needed as the device is in gfxoff state so the CG/PG state
is handled just like it would be for gfxoff during runtime gfxoff.
This should also prevent delays on resume.
Reworked from Pratik's original patch (Alex)
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Provide and explanation as to why we skip GFX and PSP for
S0ix. GFX goes into gfxoff, same as runtime, so no need
to tear down and re-init. PSP is part of the always on
state, so no need to touch it.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The SMU expects CGPG to be enabled when entering S0ix.
with this we can re-enable SMU suspend.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This really needs to be done to properly tear down
the device. SMC, PSP, and GFX are still problematic,
need to dig deeper into what aspect of them that is
problematic.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No functional change.
v2: use correct dev
v3: rework
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the non-DC specific code into the DCE IP blocks similar
to how we handle DC. This cleans up the common suspend
and resume pathes.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set flags at the top level pmops callbacks to track
state. This cleans up the current set of flags and
properly handles S4 on S0ix capable systems.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During system hibernation suspend still need un-gate gfx CG/PG firstly to handle HW
status check before HW resource destory.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no need to keep vgaswitcheroo around for HG
systems. They don't use muxes and their power control
is handled via ACPI.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 33cf440d59.
And it will enable mode-2 gpu reset for vangogh,
it asks PSP firmware version is 00.1A.00.0F or newer.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When recovery thread has begun GPU reset, there should be not other
threads to access hardware, otherwise system randomly hang.
v2 (chk): rewritten from scratch, use trylock and lockdep instead of
hand wiring the logic.
v3: add in_irq check
v4: change to check in_task
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We set the same variable a few lines above. Drop the duplicate
setting.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is to fix the case where it only enable the light SMU
on normal device init. This feature actually need to be enabled after ASIC
been reset as well.
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It was leftover from radeon where it was required for some
specific old hardware. It hasn't been required for ages
and the driver already falls back to MMIO when legacy IO
is not available. Legacy IO also seems to be problematic on
on some thunderbolt devices. Drop it.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Interrupts on are non-reentrant on linux. This is just an ancient
leftover from radeon where irq processing was kicked of from different
places.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
cause:
It is necessary to send ras disable command to ras-ta during gfx
block ras later init, because the ras capability is disable read
from vbios for vega20 gaming, but the ras context is released
during ras init process, this will cause send ras disable command
to ras-to failed.
how:
Delay releasing ras context, the ras context
will be released after gfx block later init done.
Changed from V1:
move release_ras_context into ras_resume
Changed from V2:
check BIT(UMC) is more reasonable before access eeprom table
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in a drm debug message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU introduce the new interface to enable light Secondary Bus Reset mode, driver
enable it on passthrough + XGMI configuration
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In passthrough configuration, hypervisior will trigger the SBR(Secondary bus reset) to the devices
without sync to each other. This could cause device hang since for XGMI configuration, all the devices
within the hive need to be reset at a limit time slot. This serial of patches try to solve this issue
by co-operate with new SMU which will only do minimum house keeping to response the SBR request but don't
do the real reset job and leave it to driver. Driver need to do the whole sw init and minimum HW init
to bring up the SMU and trigger the reset(possibly BACO) on all the ASICs at the same time
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Andrey Grodzovsky andrey.grodzovsky@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The gmc.xgmi.head list originally is designed for device list in the XGMI hive. Mix use it
for reset purpose will prevent the reset function to adjust XGMI device list which is required
in next change
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Andrey Grodzovsky andrey.grodzovsky@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu driver may be in reset state during init which will not initialize the kfd,
driver need to initialize the KFD after reset by check the flag
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
driver should use the gfx_info atomfirmware interface
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use MSG_GfxDriverReset for mode reset and retire MSG_Mode1Reset.
Centralize soc15_asic_mode1_reset() and nv_asic_mode1_reset()functions.
Add mode2_reset_is_support() for smu->ppt_funcs.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set ip blocks and asic family id
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Parses asic configurations stored in gpu_info firmware and make them available
for driver to use.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add aldebaran in amdgpu_asic_name array and amdgpu_asic_type enum
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When unloading driver after killing some applications, it will hit sdma
flush tlb job timeout which is called by ttm_bo_delay_delete. So
to avoid the job submit after fence driver fini, call ttm_bo_lock_delayed_workqueue
before fence driver fini. And also put drm_sched_fini before waiting fence.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
when try to shutdown guest vm in sriov mode, virt data
exchange is not fini. After vram lost, trying to write
vram could hang cpu.
[How]
add fini virt data exchange in ip_suspend
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Jack Zhang <Jack.Zhang1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sienna cichlid needs one vf mode which allows vf to set and get
clock status from guest vm. So now expose the required interface
and allow some smu request on VF mode. Also since this asic blocked
direct MMIO access, use KIQ to send SMU request under sriov vf.
OD use same command as getting pp table which is not allowed for
sienna cichlid, so remove OD feature under sriov vf.
Signed-off-by: Horace Chen <horace.chen@amd.com>
Reviewed-by: Monk Liu<monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the number of badpage records exceed the threshold, driver has
updated both epprom header and control->tbl_hdr.header before gpu reset,
therefore GPU recovery thread no need to read epprom header directly.
v2: merge amdgpu_ras_check_err_threshold into amdgpu_ras_eeprom_check_err_threshold
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move gpu_reset_counter after drm_sched_stop to avoid race
condition caused by job submitted between reset_count +1 and
drm_sched_stop.
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the shutdown and poweroff opt on the s0i3 system we still need
un-gate the gfx clock gating and power gating before destory amdgpu device.
Fixes: 628c36d7b2 ("drm/amdgpu: update amdgpu device suspend/resume sequence for s0i3 support")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1499
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
As dimgrey_cavefish driver is stable enough, set gpu recovery as default
in HW hang for dimgrey_cavefish.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the flag used by kfd is not actually related to fbcon, it just happens
to align. Use the runpm flag instead so that we can decouple it from
the fbcon flag.
v2: fix resume as well
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are already called in amdgpu_device_suspend/resume which
are already called in the same functions.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to use generic PCI reset mechanisms (FLR, SBR) as
a reset mechanism to verify that the generic PCI reset mechanisms
are working properly.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Until the issues in the SMU firmware are fixed.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Fix a racing issue when jobs on 2 rings timeout simultaneously.
If 2 rings timed out at the same time, the
amdgpu_device_gpu_recover will be reentered. Then the
adev->gmc.xgmi.head will be grabbed by 2 local linked list,
which may cause wild pointer issue in iterating.
lock the device earily to prevent the node be added to 2
different lists.
also increase karma for the skipped job since the job is also
timed out and should be guilty.
Signed-off-by: Horace Chen <horace.chen@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ip discovery is supported on green sardine, it doesn't need gpu info
firmware anymore.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add PCIE_SPEED_32_0GT and PCIE GEN5 support for amdgpu.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amd-drm-next-5.12-2021-01-20:
amdgpu:
- Fix non-x86 build
- W=1 fixes from Lee Jones
- Enable GPU reset on Navy Flounder
- Kernel doc fixes
- SMU workload profile fixes for APUs
- Display updates
- SR-IOV fixes
- Vangogh SMU feature enablment and bug fixes
- GPU reset support for Vangogh
- Misc cleanups
Conflicts:
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_mpc.c
Resolve the conflict by picking the initialization value from amd from
f03e80d2e8 ("drm/amd/display: Initialize stack variable") over the
one Linus picked in 61d791365b ("drm/amd/display: avoid
uninitialized variable warning"). It shouldn't matter.
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210120060951.22600-1-alexander.deucher@amd.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
UAPI Changes:
- Fix fourcc macro for amlogic video fbc.
Cross-subsystem Changes:
- Export pci_rebar_bytes_to_size.
- Add a PCI quirk to increase bar0 for RX 5600 XT Pulse to max possible size.
- Convert devicetree bindings to use the OF graph schema.
- Update s6e63m0 bindings.
- Make omapfb2 DSI_CM incompatible with drm/omap2 DSI-CM because of
module conflicts.
- Add Zack Rusin as vmwgfx maintainer.
- Add CONFIG_DMABUF_DEBUG for validating dma-buf users don't loo kat struct page when importing or detaching.
Core Changes:
- Remove references to drm_device.pdev
- Fix regression in ttm_bo_move_to_lru_tail().
- Assorted docbook updates.
- Do not send dp-mst hotplug events on error when probing.
- Move some agp macros to agpsupport.c, so it's not always compiled.
- Move drm_need_swiotlb.h to drm_cache.c
- Only build drm_memory.o for legacy drivers, and move CONFIG_DRM_VM to legacy.
- Nuke drm_device.hose
- Warn when the ttm resource manager is non-empty when disabling.
- Assorted small fixes.
Driver Changes:
- Small assorted fixes in radeon, v3d, hisilicon, mipi-dbi, panfrost, hibmc, vc4, amdgpu, vkms, vmwgfx.
- Move hisilicon to use simple encode.
- Add writeback connector to vkms.
- Add support for BT2020 to DE3.
- Use gem prime mmap helpers in vc4, and move the mmap function upwards.
- Use managed drm device, and cleanup error paths and display registers in vmwgfx.
- Use correct bus_format and connector_type for innolux_n116bge.
- Fix a lot of warnings with W=1 (Lee Jones)
-----BEGIN PGP SIGNATURE-----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=JIou
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2021-01-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.12:
UAPI Changes:
- Fix fourcc macro for amlogic video fbc.
Cross-subsystem Changes:
- Export pci_rebar_bytes_to_size.
- Add a PCI quirk to increase bar0 for RX 5600 XT Pulse to max possible size.
- Convert devicetree bindings to use the OF graph schema.
- Update s6e63m0 bindings.
- Make omapfb2 DSI_CM incompatible with drm/omap2 DSI-CM because of
module conflicts.
- Add Zack Rusin as vmwgfx maintainer.
- Add CONFIG_DMABUF_DEBUG for validating dma-buf users don't loo kat struct page when importing or detaching.
Core Changes:
- Remove references to drm_device.pdev
- Fix regression in ttm_bo_move_to_lru_tail().
- Assorted docbook updates.
- Do not send dp-mst hotplug events on error when probing.
- Move some agp macros to agpsupport.c, so it's not always compiled.
- Move drm_need_swiotlb.h to drm_cache.c
- Only build drm_memory.o for legacy drivers, and move CONFIG_DRM_VM to legacy.
- Nuke drm_device.hose
- Warn when the ttm resource manager is non-empty when disabling.
- Assorted small fixes.
Driver Changes:
- Small assorted fixes in radeon, v3d, hisilicon, mipi-dbi, panfrost, hibmc, vc4, amdgpu, vkms, vmwgfx.
- Move hisilicon to use simple encode.
- Add writeback connector to vkms.
- Add support for BT2020 to DE3.
- Use gem prime mmap helpers in vc4, and move the mmap function upwards.
- Use managed drm device, and cleanup error paths and display registers in vmwgfx.
- Use correct bus_format and connector_type for innolux_n116bge.
- Fix a lot of warnings with W=1 (Lee Jones)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5c3ad775-48ce-33ee-e4c6-a5e1e540f845@linux.intel.com
Remove unused space_needed variable.
Fixes: 453f617a30 ("drm/amdgpu: Resize BAR0 to the maximum available size, even if it doesn't cover VRAM")
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/413807/
amd-drm-next-5.12-2021-01-08:
amdgpu:
- Rework IH ring handling on vega and navi
- Rework HDP handling for vega and navi
- swSMU documenation updates
- Overdrive support for Sienna Cichlid and newer asics
- swSMU updates for vangogh
- swSMU updates for renoir
- Enable FP16 on DCE8-11
- Misc code cleanups and bug fixes
radeon:
- Fixes for platforms that can't access PCI resources correctly
- Misc code cleanups
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108221811.3868-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
Enable GPU reset when we encounter a hang.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
For multiple VF, after engine hang,as host driver will first
encounter FLR, so has no meanning to set compute to 60s.
v2:
Refine the patch and comment
Signed-off-by: Emily.Deng <Emily.Deng@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Using struct drm_device.pdev is deprecated. Convert amdgpu to struct
drm_device.dev. No functional changes.
v3:
* rebased
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210107080748.4768-3-tzimmermann@suse.de
Adhere to kernel coding style.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210107080748.4768-2-tzimmermann@suse.de
This allows BAR0 resizing to be done for cards which don't advertise
support for a size large enough to cover the VRAM but which do
advertise at least one size larger than the default. For example,
my RX 5600 XT, which advertises 256MB, 512MB and 1GB.
Signed-off-by: Darren Salt <devspam@moreofthesa.me.uk>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Nirmoy Das <nirmoy.das@amd.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20210107175017.15893-4-nirmoy.das@amd.com
Enable gpu recovery for navy_flounder by default to trigger
reset once needed.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fix bug 210921 where DRM_INFO floods log when hitting an unsupported ASIC in
amdgpu_device_asic_has_dc_support(). This info should be only called once.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=210921
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
UAPI Changes:
- Not necessarily one, but we document that userspace needs to force probe connectors.
Cross-subsystem Changes:
- Require FB_ATY_CT for aty on sparc64.
- video: Fix documentation, and a few compiler warnings.
- Add devicetree bindings for DP connectors.
- dma-buf: Update kernel-doc, and add might_lock for resv objects in begin/end_cpu_access.
Core Changes:
- ttm: Warn when releasing a pinned bo.
- ttm: Cleanup bo size handling.
- cma-helper: Remove prime infix, and implement mmap as GEM CMA functions.
- Split drm_prime_sg_to_page_addr_arrays into 2 functions.
- Add a new api to install irq using devm.
- Update panel kerneldoc to inline style.
- Add DP support to drm/bridge.
- Assorted small fixes to ttm, fb-helper, scheduler.
- Add atomic_commit_setup function callback.
- Automatically use the atomic gamma_set, instead of forcing drivers to declare the default atomic version.
- Allow using degamma for legacy gamma if gamma is not available.
- Clarify that primary/cursor planes are not tied to 1 crtc (depending on possible_crtcs).
- ttm: Cleanup the lru handler.
Driver Changes:
- Add pm support to ingenic.
- Assorted small fixes in radeon, via, rockchip, omap2fb, kmb, gma500, nouveau, virtio, hisilicon, ingenic, s6e63m0 panel, ast, udlfb.
- Add BOE NV110WTM-N61, ys57pss36bh5gq, Khadas TS050 panels.
- Stop using pages with drm_prime_sg_to_page_addr_arrays, and switch all callers to use ttm_sg_tt_init.
- Cleanup compiler and docbook warnings in a lot of fbdev devices.
- Use the drmm_vram_helper in hisilicon.
- Add support for BCM2711 DSI1 in vc4.
- Add support for 8-bit delta RGB panels to ingenic.
- Add documentation on how to test vkms.
- Convert vc4 to atomic helpers.
- Use degamma instead of gamma table in omap, to add support for CTM and color encoding/range properties.
- Rework omap DSI code, and merge all omapdrm modules now that the last omap panel is now a drm panel.
- More refactoring of omap dsi code.
- Enable 10/12 bpc outputs in vc4.
-----BEGIN PGP SIGNATURE-----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=orEC
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-12-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.12:
UAPI Changes:
- Not necessarily one, but we document that userspace needs to force probe connectors.
Cross-subsystem Changes:
- Require FB_ATY_CT for aty on sparc64.
- video: Fix documentation, and a few compiler warnings.
- Add devicetree bindings for DP connectors.
- dma-buf: Update kernel-doc, and add might_lock for resv objects in begin/end_cpu_access.
Core Changes:
- ttm: Warn when releasing a pinned bo.
- ttm: Cleanup bo size handling.
- cma-helper: Remove prime infix, and implement mmap as GEM CMA functions.
- Split drm_prime_sg_to_page_addr_arrays into 2 functions.
- Add a new api to install irq using devm.
- Update panel kerneldoc to inline style.
- Add DP support to drm/bridge.
- Assorted small fixes to ttm, fb-helper, scheduler.
- Add atomic_commit_setup function callback.
- Automatically use the atomic gamma_set, instead of forcing drivers to declare the default atomic version.
- Allow using degamma for legacy gamma if gamma is not available.
- Clarify that primary/cursor planes are not tied to 1 crtc (depending on possible_crtcs).
- ttm: Cleanup the lru handler.
Driver Changes:
- Add pm support to ingenic.
- Assorted small fixes in radeon, via, rockchip, omap2fb, kmb, gma500, nouveau, virtio, hisilicon, ingenic, s6e63m0 panel, ast, udlfb.
- Add BOE NV110WTM-N61, ys57pss36bh5gq, Khadas TS050 panels.
- Stop using pages with drm_prime_sg_to_page_addr_arrays, and switch all callers to use ttm_sg_tt_init.
- Cleanup compiler and docbook warnings in a lot of fbdev devices.
- Use the drmm_vram_helper in hisilicon.
- Add support for BCM2711 DSI1 in vc4.
- Add support for 8-bit delta RGB panels to ingenic.
- Add documentation on how to test vkms.
- Convert vc4 to atomic helpers.
- Use degamma instead of gamma table in omap, to add support for CTM and color encoding/range properties.
- Rework omap DSI code, and merge all omapdrm modules now that the last omap panel is now a drm panel.
- More refactoring of omap dsi code.
- Enable 10/12 bpc outputs in vc4.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/78381a4f-45fd-aed4-174a-94ba051edd37@linux.intel.com
When GFXOFF is enabled and GPU is idle, driver will fail to access some
registers. Therefore change to disable power gating before all access
registers with MMIO.
Dmesg log is as following:
amdgpu 0000:03:00.0: amdgpu: amdgpu: finishing device.
amdgpu: cp queue pipe 4 queue 0 preemption failed
amdgpu 0000:03:00.0: amdgpu: failed to write reg 2890 wait reg 28a2
amdgpu 0000:03:00.0: amdgpu: failed to write reg 1a6f4 wait reg 1a706
amdgpu 0000:03:00.0: amdgpu: failed to write reg 2890 wait reg 28a2
amdgpu 0000:03:00.0: amdgpu: failed to write reg 1a6f4 wait reg 1a706
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change it to check if the device has ACPI power resources.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In preparation for systems that support d3cold on dGPUs
independent of PX/HG. No functional change intended.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
S0ix only makes sense on APUs since they are part of the platform, so
only when the ASIC is APU should set amdgpu_acpi_is_s0ix_supported flag
to deal with the related situation.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Required backmerge since we will be based on top of v5.11, and there
has been a request to backmerge already to upstream some features.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Rename "ring_mirror_list" to "pending_list",
to describe what something is, not what it does,
how it's used, or how the hardware implements it.
This also abstracts the actual hardware
implementation, i.e. how the low-level driver
communicates with the device it drives, ring, CAM,
etc., shouldn't be exposed to DRM.
The pending_list keeps jobs submitted, which are
out of our control. Usually this means they are
pending execution status in hardware, but the
latter definition is a more general (inclusive)
definition.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/405573/
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Christian König <christian.koenig@amd.com>
Rename "node" to "list" in struct drm_sched_job,
in order to make it consistent with what we see
being used throughout gpu_scheduler.h, for
instance in struct drm_sched_entity, as well as
the rest of DRM and the kernel.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/403515/
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Christian König <christian.koenig@amd.com>
We only need to arbitrate VGA access on VGA compatible devices.
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix the null pointer issue when runtime pm is triggered.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Need skip the RLC/CP/GFX disable for let GFXOFF enter during suspend period.
- For s0i3 suspend only need suspend DCE and each IP interrupt.
- Before VBIOS POSTed check and atom HW INT need set the GPU power status change
to D0 in the resume period, otherwise the HW will be mess up and see the SDMA hang.
- Need handle the GPU reset path during amdgpu device suspend.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:594: warning: Function parameter or member 'reg_addr' not described in 'amdgpu_device_indirect_rreg'
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:624: warning: Function parameter or member 'reg_addr' not described in 'amdgpu_device_indirect_rreg64'
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoids confusion in configurations.
v2: fix build when CONFIG_DRM_AMD_DC_DCN is disabled
v3: rebase on latest code
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A kernel-doc markup can't be mixed with a random comment,
as it causes parsing problems.
While here, change an invalid kernel-doc markup into
a common comment.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Running "make htmldocs: produce lots of warnings on those files:
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'p_size' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:211: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_fini'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'p_size' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:211: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_fini'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'p_size' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:211: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_fini'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'p_size' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:211: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_fini'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:90: warning: Excess function parameter 'man' description in 'amdgpu_gtt_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:90: warning: Excess function parameter 'p_size' description in 'amdgpu_gtt_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:134: warning: Excess function parameter 'man' description in 'amdgpu_gtt_mgr_fini'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:90: warning: Excess function parameter 'man' description in 'amdgpu_gtt_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:90: warning: Excess function parameter 'p_size' description in 'amdgpu_gtt_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:134: warning: Excess function parameter 'man' description in 'amdgpu_gtt_mgr_fini'
./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:675: warning: Excess function parameter 'dev' description in 'amdgpu_device_asic_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:675: warning: Excess function parameter 'dev' description in 'amdgpu_device_asic_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:675: warning: Excess function parameter 'dev' description in 'amdgpu_device_asic_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:675: warning: Excess function parameter 'dev' description in 'amdgpu_device_asic_init'
They're related to the repacement of some parameters by adev,
and due to a few renamed parameters.
While here, uniform the name of the parameter for it to be
the same on all functions using a pointer to struct amdgpu_device.
Update the kernel-doc documentation accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a helper so we can set per asic default values. Also,
the module parameter is currently clamped to 8, but clamp it
per asic just in case some asics have different limits in the
future. Enable the option on gfx6,7 as well for consistency.
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to enable display IP block for vangogh platforms.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Current code wrongly treat all cases as job == NULL.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-and-tested-by: Jane Jian <Jane.Jian@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add DM block support for dimgrey_cavefish.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove gpu_info fw support for dimgrey_cavefish, gpu info can be got
from ip discovery.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as navi series.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds green_sardine support for gpu_info firmware and ip block setting.
v2: use apu flag
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The default auto setting for kcq should not generate
a warning.
Fixes: a300de40f6 ("drm/amdgpu: introduce a new parameter to configure how many KCQ we want(v5)")
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds van gogh support for gpu_info firmware and ip block setting.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
