[Why]
DSC Power down code has been moved from dcn31_init_hw into init_pipes()
Need to remove it from dcn10_init_hw() as well to avoid duplicated action
on dcn1.x/2.x
[How]
Remove DSC power down code from dcn10_init_hw()
Fixes: 8fa6f4c571 ("drm/amd/display: fixed the DSC power off sequence during Driver PnP")
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Once DSC slice cannot fit pixel clock, we incorrectly
reset min slices to 0 and allow max slice to operate,
even when max slice itself cannot fit the pixel clock
properly.
[How]
Change the sequence such that we correctly determine
DSC is not possible when both min slices and max
slices cannot fit pixel clock per slice.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chris Park <Chris.Park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some video card has more than one vcn instance, passing 0 to
vcn_v3_0_pause_dpg_mode is incorrect.
Error msg:
Register(1) [mmUVD_POWER_STATUS] failed to reach value
0x00000001 != 0x00000002
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: tiancyin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
For VCN FW to detect ASIC type, in order to use different mailbox registers.
V2: simplify codes and fix format issue.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes case where MSPI controller is used to access spi-nor
flash and BSPI block is not present.
Fixes: 5f195ee7d8 ("spi: bcm-qspi: Implement the spi_mem interface")
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220328142442.7553-1-kdasu.kdev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cqspi_set_protocol() only set the data width, but ignored the command
and address width (except for 8-8-8 DTR ops), leading to corruption of
all transfers using 1-X-X or X-X-X ops. Fix by setting the other two
widths as well.
While we're at it, simplify the code a bit by replacing the
CQSPI_INST_TYPE_* constants with ilog2().
Tested on a TI AM64x with a Macronix MX25U51245G QSPI flash with 1-4-4
read and write operations.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220331110819.133392-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit b470e10eb4 ("spi: core: add dma_map_dev for dma device") added
dma_map_dev for _spi_map_msg() but missed to add for unmap routine,
__spi_unmap_msg(), so add it now.
Fixes: b470e10eb4 ("spi: core: add dma_map_dev for dma device")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220406132238.1029249-1-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The clang static analyzer reports the following warning,
File: drivers/cdrom/cdrom.c
Warning: line 1380, column 7
Although the value stored to 'status' is used in enclosing
expression, the value is never actually read from 'status'
Remove the unused variable to eliminate the warning.
Signed-off-by: Enze Li <lienze@kylinos.cn>
Link: https://lore.kernel.org/all/20220401032623.293666-1-lienze@kylinos.cn
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20220401211842.2088096-1-phil@philpotter.co.uk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All remaining skbs should be released when myri10ge_xmit fails to
transmit a packet. Fix it within another skb_list_walk_safe.
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
aqc111_rx_fixup() contains several out-of-bounds accesses that can be
triggered by a malicious (or defective) USB device, in particular:
- The metadata array (desc_offset..desc_offset+2*pkt_count) can be out of bounds,
causing OOB reads and (on big-endian systems) OOB endianness flips.
- A packet can overlap the metadata array, causing a later OOB
endianness flip to corrupt data used by a cloned SKB that has already
been handed off into the network stack.
- A packet SKB can be constructed whose tail is far beyond its end,
causing out-of-bounds heap data to be considered part of the SKB's
data.
Found doing variant analysis. Tested it with another driver (ax88179_178a), since
I don't have a aqc111 device to test it, but the code looks very similar.
Signed-off-by: Marcin Kozlowski <marcinguy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qede_build_skb() assumes build_skb() always works and goes straight
to skb_reserve(). However, build_skb() can fail under memory pressure.
This results in a kernel panic because the skb to reserve is NULL.
Add a check in case build_skb() failed to allocate and return NULL.
The NULL return is handled correctly in callers to qede_build_skb().
Fixes: 8a8633978b ("qede: Add build_skb() support.")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/ipv6/ip6mr.c:1656:14: warning: unused variable 'do_wrmifwhole'
Move it to the CONFIG_IPV6_PIMSM_V2 scope where its used.
Fixes: 4b340a5a72 ("net: ip6mr: add support for passing full packet on wrong mif")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-04-05
Maciej Fijalkowski says:
We were solving issues around AF_XDP busy poll's not-so-usual scenarios,
such as very big busy poll budgets applied to very small HW rings. This
set carries the things that were found during that work that apply to
net tree.
One thing that was fixed for all in-tree ZC drivers was missing on ice
side all the time - it's about syncing RCU before destroying XDP
resources. Next one fixes the bit that is checked in ice_xsk_wakeup and
third one avoids false setting of DD bits on Tx descriptors.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Following the recommendation in Documentation/memory-barriers.txt for
virtual machine guests.
Fixes: 8b6a877c06 ("Drivers: hv: vmbus: Replace the per-CPU channel lists with a global array of channels")
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20220328154457.100872-1-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Currently there are known potential issues for balloon and hot-add on
ARM64:
* Unballoon requests from Hyper-V should only unballoon ranges
that are guest page size aligned, otherwise guests cannot handle
because it's impossible to partially free a page. This is a
problem when guest page size > 4096 bytes.
* Memory hot-add requests from Hyper-V should provide the NUMA
node id of the added ranges or ARM64 should have a functional
memory_add_physaddr_to_nid(), otherwise the node id is missing
for add_memory().
These issues require discussions on design and implementation. In the
meanwhile, post_status() is working and essential to guest monitoring.
Therefore instead of disabling the entire hv_balloon driver, the
ballooning (when page size > 4096 bytes) and hot-add are disabled
accordingly for now. Once the issues are fixed, they can be re-enable in
these cases.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220325023212.1570049-3-boqun.feng@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
DM_STATUS_REPORT expects the numbers of pages in the unit of 4k pages
(HV_HYP_PAGE) instead of guest pages, so to make it work when guest page
sizes are larger than 4k, convert the numbers of guest pages into the
numbers of HV_HYP_PAGEs.
Note that the numbers of guest pages are still used for tracing because
tracing is internal to the guest kernel.
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220325023212.1570049-2-boqun.feng@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
signal_pending() checks TIF_NOTIFY_SIGNAL and TIF_SIGPENDING, which
signal that the task should bail out of the syscall when possible. This
is a separate concept from need_resched(), which checks
TIF_NEED_RESCHED, signaling that the task should preempt.
In particular, with the current code, the signal_pending() bailout
probably won't work reliably.
Change this to look like other functions that read lots of data, such as
read_zero().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The fast key erasure RNG design relies on the key that's used to be used
and then discarded. We do this, making judicious use of
memzero_explicit(). However, reads to /dev/urandom and calls to
getrandom() involve a copy_to_user(), and userspace can use FUSE or
userfaultfd, or make a massive call, dynamically remap memory addresses
as it goes, and set the process priority to idle, in order to keep a
kernel stack alive indefinitely. By probing
/proc/sys/kernel/random/entropy_avail to learn when the crng key is
refreshed, a malicious userspace could mount this attack every 5 minutes
thereafter, breaking the crng's forward secrecy.
In order to fix this, we just overwrite the stack's key with the first
32 bytes of the "free" fast key erasure output. If we're returning <= 32
bytes to the user, then we can still return those bytes directly, so
that short reads don't become slower. And for long reads, the difference
is hopefully lost in the amortization, so it doesn't change much, with
that amortization helping variously for medium reads.
We don't need to do this for get_random_bytes() and the various
kernel-space callers, and later, if we ever switch to always batching,
this won't be necessary either, so there's no need to change the API of
these functions.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jann Horn <jannh@google.com>
Fixes: c92e040d57 ("random: add backtracking protection to the CRNG")
Fixes: 186873c549 ("random: use simpler fast key erasure flow on per-cpu keys")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The driver doesn't support clause 45 register access yet, but doesn't
check if the access is a c45 one either. This leads to spurious register
reads and writes. Add the check.
Fixes: 542671fe4d ("net: phy: mscc-miim: Add MDIO driver")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Chiu says:
====================
Fix broken link on Xilinx's AXI Ethernet in SGMII mode
The Ethernet driver use phy-handle to reference the PCS/PMA PHY. This
could be a problem if one wants to configure an external PHY via phylink,
since it use the same phandle to get the PHY. To fix this, introduce a
dedicated pcs-handle to point to the PCS/PMA PHY and deprecate the use
of pointing it with phy-handle. A similar use case of pcs-handle can be
seen on dpaa2 as well.
--- patch v5 ---
- Re-apply the v4 patch on the net tree.
- Describe the pcs-handle DT binding at ethernet-controller level.
--- patch v6 ---
- Remove "preferrably" to clearify usage of pcs_handle.
--- patch v7 ---
- Rebase the patch on latest net/master
--- patch v8 ---
- Rebase the patch on net-next/master
- Add "reviewed-by" tag in PATCH 3/4: dt-bindings: net: add pcs-handle
attribute
- Remove "fix" tag in last commit message since this is not a critical
bug and will not be back ported to stable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In some SGMII use cases where both a fixed link external PHY and the
internal PCS/PMA PHY need to be configured, we should explicitly use a
phandle "pcs-phy" to get the reference to the PCS/PMA PHY. Otherwise, the
driver would use "phy-handle" in the DT as the reference to both the
external and the internal PCS/PMA PHY.
In other cases where the core is connected to a SFP cage, we could still
point phy-handle to the intenal PCS/PMA PHY, and let the driver connect
to the SFP module, if exist, via phylink.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Document the new pcs-handle attribute to support connecting to an
external PHY. For Xilinx's AXI Ethernet, this is used when the core
operates in SGMII or 1000Base-X modes and links through the internal
PCS/PMA PHY.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
the struct member `phy_node` of struct axienet_local is not used by the
driver anymore after initialization. It might be a remnent of old code
and could be removed.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The call to axienet_mdio_setup should not depend on whether "phy-node"
pressents on the DT. Besides, since `lp->phy_node` is used if PHY is in
SGMII or 100Base-X modes, move it into the if statement. And the next patch
will remove `lp->phy_node` from driver's private structure and do an
of_node_put on it right away after use since it is not used elsewhere.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
In some cases, xdp tx_queue can get used before initialization.
1. interface up/down
2. ring buffer size change
When CPU cores are lower than maximum number of channels of sfc driver,
it creates new channels only for XDP.
When an interface is up or ring buffer size is changed, all channels
are initialized.
But xdp channels are always initialized later.
So, the below scenario is possible.
Packets are received to rx queue of normal channels and it is acted
XDP_TX and tx_queue of xdp channels get used.
But these tx_queues are not initialized yet.
If so, TX DMA or queue error occurs.
In order to avoid this problem.
1. initializes xdp tx_queues earlier than other rx_queue in
efx_start_channels().
2. checks whether tx_queue is initialized or not in efx_xdp_tx_buffers().
Splat looks like:
sfc 0000:08:00.1 enp8s0f1np1: TX queue 10 spurious TX completion id 250
sfc 0000:08:00.1 enp8s0f1np1: resetting (RECOVER_OR_ALL)
sfc 0000:08:00.1 enp8s0f1np1: MC command 0x80 inlen 100 failed rc=-22
(raw=22) arg=789
sfc 0000:08:00.1 enp8s0f1np1: has been disabled
Fixes: f28100cb9c ("sfc: fix lack of XDP TX queues - error XDP TX failed (-22)")
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While parsing user-provided actions, openvswitch module may dynamically
allocate memory and store pointers in the internal copy of the actions.
So this memory has to be freed while destroying the actions.
Currently there are only two such actions: ct() and set(). However,
there are many actions that can hold nested lists of actions and
ovs_nla_free_flow_actions() just jumps over them leaking the memory.
For example, removal of the flow with the following actions will lead
to a leak of the memory allocated by nf_ct_tmpl_alloc():
actions:clone(ct(commit),0)
Non-freed set() action may also leak the 'dst' structure for the
tunnel info including device references.
Under certain conditions with a high rate of flow rotation that may
cause significant memory leak problem (2MB per second in reporter's
case). The problem is also hard to mitigate, because the user doesn't
have direct control over the datapath flows generated by OVS.
Fix that by iterating over all the nested actions and freeing
everything that needs to be freed recursively.
New build time assertion should protect us from this problem if new
actions will be added in the future.
Unfortunately, openvswitch module doesn't use NLA_F_NESTED, so all
attributes has to be explicitly checked. sample() and clone() actions
are mixing extra attributes into the user-provided action list. That
prevents some code generalization too.
Fixes: 34ae932a40 ("openvswitch: Make tunnel set action attach a metadata dst")
Link: https://mail.openvswitch.org/pipermail/ovs-dev/2022-March/392922.html
Reported-by: Stéphane Graber <stgraber@ubuntu.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tlb_remove_huge_tlb_entry only considers PMD_SIZE and PUD_SIZE when
updating the mmu_gather structure.
Unfortunately on arm64 there are two additional huge page sizes that
need to be covered: CONT_PTE_SIZE and CONT_PMD_SIZE. Where an end-user
attempts to employ contiguous huge pages, a VM_BUG_ON can be experienced
due to the fact that the tlb structure hasn't been correctly updated by
the relevant tlb_flush_p.._range() call from tlb_remove_huge_tlb_entry.
This patch adds inequality logic to the generic implementation of
tlb_remove_huge_tlb_entry s.t. CONT_PTE_SIZE and CONT_PMD_SIZE are
effectively covered on arm64. Also, as well as ptes, pmds and puds;
p4ds are now considered too.
Reported-by: David Hildenbrand <david@redhat.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/linux-mm/811c5c8e-b3a2-85d2-049c-717f17c3a03a@redhat.com/
Signed-off-by: Steve Capper <steve.capper@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220330112543.863-1-steve.capper@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The alternatives code must be `noinstr` such that it does not patch itself,
as the cache invalidation is only performed after all the alternatives have
been applied.
Mark patch_alternative() as `noinstr`. Mark branch_insn_requires_update()
and get_alt_insn() with `__always_inline` since they are both only called
through patch_alternative().
Booting a kernel in QEMU TCG with KCSAN=y and ARM64_USE_LSE_ATOMICS=y caused
a boot hang:
[ 0.241121] CPU: All CPU(s) started at EL2
The alternatives code was patching the atomics in __tsan_read4() from LL/SC
atomics to LSE atomics.
The following fragment is using LL/SC atomics in the .text section:
| <__tsan_unaligned_read4+304>: ldxr x6, [x2]
| <__tsan_unaligned_read4+308>: add x6, x6, x5
| <__tsan_unaligned_read4+312>: stxr w7, x6, [x2]
| <__tsan_unaligned_read4+316>: cbnz w7, <__tsan_unaligned_read4+304>
This LL/SC atomic sequence was to be replaced with LSE atomics. However since
the alternatives code was instrumentable, __tsan_read4() was being called after
only the first instruction was replaced, which led to the following code in memory:
| <__tsan_unaligned_read4+304>: ldadd x5, x6, [x2]
| <__tsan_unaligned_read4+308>: add x6, x6, x5
| <__tsan_unaligned_read4+312>: stxr w7, x6, [x2]
| <__tsan_unaligned_read4+316>: cbnz w7, <__tsan_unaligned_read4+304>
This caused an infinite loop as the `stxr` instruction never completed successfully,
so `w7` was always 0.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220405104733.11476-1-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
CONFIG_SATA_LPM_MOBILE_POLICY was renamed to CONFIG_SATA_LPM_POLICY in
commit 4dd4d3deb5 ("ata: ahci: Rename CONFIG_SATA_LPM_MOBILE_POLICY
configuration item").
This can potentially cause problems as users would invisibly lose
configuration policy defaults when they built the new kernel. To
avoid such problems, switch back to the old name (even if it's wrong).
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
There is often not a MAC address available in an EEPROM accessible by
Linux with Marvell devices. Instead the bootload has the MAC address
and directly programs it into the hardware. So don't consider an error
from of_get_mac_address() has fatal. However, the check was added for
the case where there is a MAC address in an the EEPROM, but the EEPROM
has not probed yet, and -EPROBE_DEFER is returned. In that case the
error should be returned. So make the check specific to this error
code.
Cc: Mauri Sandberg <maukka@ext.kapsi.fi>
Reported-by: Thomas Walther <walther-it@gmx.de>
Fixes: 42404d8f1c ("net: mv643xx_eth: process retval from of_get_mac_address")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220405000404.3374734-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'OVS_CLONE_ATTR_EXEC' is an internal attribute that is used for
performance optimization inside the kernel. It's added by the kernel
while parsing user-provided actions and should not be sent during the
flow dump as it's not part of the uAPI.
The issue doesn't cause any significant problems to the ovs-vswitchd
process, because reported actions are not really used in the
application lifecycle and only supposed to be shown to a human via
ovs-dpctl flow dump. However, the action list is still incorrect
and causes the following error if the user wants to look at the
datapath flows:
# ovs-dpctl add-dp system@ovs-system
# ovs-dpctl add-flow "<flow match>" "clone(ct(commit),0)"
# ovs-dpctl dump-flows
<flow match>, packets:0, bytes:0, used:never,
actions:clone(bad length 4, expected -1 for: action0(01 00 00 00),
ct(commit),0)
With the fix:
# ovs-dpctl dump-flows
<flow match>, packets:0, bytes:0, used:never,
actions:clone(ct(commit),0)
Additionally fixed an incorrect attribute name in the comment.
Fixes: b233504033 ("openvswitch: kernel datapath clone action")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/20220404104150.2865736-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Incorrect comparison in bitmask .reduce, from Jeremy Sowden.
2) Missing GFP_KERNEL_ACCOUNT for dynamically allocated objects,
from Vasily Averin.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: memcg accounting for dynamically allocated objects
netfilter: bitwise: fix reduce comparisons
====================
Link: https://lore.kernel.org/r/20220405100923.7231-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace the last instance of acpi_bus_get_device(), added recently
by commit 87e59b36e5 ("spi: Support selection of the index of the
ACPI Spi Resource before alloc"), with acpi_fetch_acpi_dev() and
finally drop acpi_bus_get_device() that has no more users.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
A couple of mlx5 fixes related to cvq
A couple of reverts dropping useless code (code that used it got reverted
earlier)
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmJKyK4PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpE40IAIvsq1WDsXfg/649lp0wMO5MPEzAvCfgQpub
hCti2lKY4K9Ykqh+uTipDTxpRmg3wt/4QlQ6NYZVmn8jQ1JsNAIFCkc7ptG1xwQI
0RypofGsFQwbar2vKh8jEzYUsIbwLKeLNlib113fH9zyDRw7KjRppUgC2cjMoYv6
JhlOFZAApzFknXC/I8fmJyzVYpX+v2GB8RX2wWiNXHQZ9hkdKd1IvJqRiuRuSY3L
haubMBFG8hrdW8qQ40ngvt+GnrxKUustmPM6x9DCJYaMkKRkXC6NxueUcIk6qWiw
UJz5IOXURdJ3i1qxmkMGSnJiYbFpmwVGlqRekN3qNVpXNovfbg0=
=l15S
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Fixes and cleanups:
- A couple of mlx5 fixes related to cvq
- A couple of reverts dropping useless code (code that used it got
reverted earlier)"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa: mlx5: synchronize driver status with CVQ
vdpa: mlx5: prevent cvq work from hogging CPU
Revert "virtio_config: introduce a new .enable_cbs method"
Revert "virtio: use virtio_device_ready() in virtio_device_restore()"
After resuming from suspend-to-RAM, the MSRs that control CPU's
speculative execution behavior are not being restored on the boot CPU.
These MSRs are used to mitigate speculative execution vulnerabilities.
Not restoring them correctly may leave the CPU vulnerable. Secondary
CPU's MSRs are correctly being restored at S3 resume by
identify_secondary_cpu().
During S3 resume, restore these MSRs for boot CPU when restoring its
processor state.
Fixes: 772439717d ("x86/bugs/intel: Set proper CPU features and setup RDS")
Reported-by: Neelima Krishnan <neelima.krishnan@intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The mechanism to save/restore MSRs during S3 suspend/resume checks for
the MSR validity during suspend, and only restores the MSR if its a
valid MSR. This is not optimal, as an invalid MSR will unnecessarily
throw an exception for every suspend cycle. The more invalid MSRs,
higher the impact will be.
Check and save the MSR validity at setup. This ensures that only valid
MSRs that are guaranteed to not throw an exception will be attempted
during suspend.
Fixes: 7a9c2dd08e ("x86/pm: Introduce quirk framework to save/restore extra MSR registers around suspend/resume")
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently when XDP rings are created, each descriptor gets its DD bit
set, which turns out to be the wrong approach as it can lead to a
situation where more descriptors get cleaned than it was supposed to,
e.g. when AF_XDP busy poll is run with a large batch size. In this
situation, the driver would request for more buffers than it is able to
handle.
Fix this by not setting the DD bits in ice_xdp_alloc_setup_rings(). They
should be initialized to zero instead.
Fixes: 9610bd988d ("ice: optimize XDP_TX workloads")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Shwetha Nagaraju <shwetha.nagaraju@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ICE_DOWN is dedicated for pf->state. Check for ICE_VSI_DOWN being set on
vsi->state in ice_xsk_wakeup().
Fixes: 2d4238f556 ("ice: Add support for AF_XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Shwetha Nagaraju <shwetha.nagaraju@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Unfortunately, the ice driver doesn't respect the RCU critical section that
XSK wakeup is surrounded with. To fix this, add synchronize_rcu() calls to
paths that destroy resources that might be in use.
This was addressed in other AF_XDP ZC enabled drivers, for reference see
for example commit b3873a5be7 ("net/i40e: Fix concurrency issues
between config flow and XSK")
Fixes: efc2214b60 ("ice: Add support for XDP")
Fixes: 2d4238f556 ("ice: Add support for AF_XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Shwetha Nagaraju <shwetha.nagaraju@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-----BEGIN PGP SIGNATURE-----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=XZaw
-----END PGP SIGNATURE-----
Merge tag 'for-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- prevent deleting subvolume with active swapfile
- fix qgroup reserve limit calculation overflow
- remove device count in superblock and its item in one transaction so
they cant't get out of sync
- skip defragmenting an isolated sector, this could cause some extra IO
- unify handling of mtime/permissions in hole punch with fallocate
- zoned mode fixes:
- remove assert checking for only single mode, we have the
DUP mode implemented
- fix potential lockdep warning while traversing devices
when checking for zone activation
* tag 'for-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: prevent subvol with swapfile from being deleted
btrfs: do not warn for free space inode in cow_file_range
btrfs: avoid defragging extents whose next extents are not targets
btrfs: fix fallocate to use file_modified to update permissions consistently
btrfs: remove device item and update super block in the same transaction
btrfs: fix qgroup reserve overflow the qgroup limit
btrfs: zoned: remove left over ASSERT checking for single profile
btrfs: zoned: traverse devices under chunk_mutex in btrfs_can_activate_zone
At the moment the GIC IRQ domain translation routine happily converts
ACPI table GSI numbers below 16 to GIC SGIs (Software Generated
Interrupts aka IPIs). On the Devicetree side we explicitly forbid this
translation, actually the function will never return HWIRQs below 16 when
using a DT based domain translation.
We expect SGIs to be handled in the first part of the function, and any
further occurrence should be treated as a firmware bug, so add a check
and print to report this explicitly and avoid lengthy debug sessions.
Fixes: 64b499d8df ("irqchip/gic-v3: Configure SGIs as standard interrupts")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220404110842.2882446-1-andre.przywara@arm.com
It turns out that our polling of RWP is totally wrong when checking
for it in the redistributors, as we test the *distributor* bit index,
whereas it is a different bit number in the RDs... Oopsie boo.
This is embarassing. Not only because it is wrong, but also because
it took *8 years* to notice the blunder...
Just fix the damn thing.
Fixes: 021f653791 ("irqchip: gic-v3: Initial support for GICv3")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20220315165034.794482-2-maz@kernel.org
The way KVM drives GICv4.{0,1} is as follows:
- vcpu_load() makes the VPE resident, instructing the RD to start
scanning for interrupts
- just before entering the guest, we check that the RD has finished
scanning and that we can start running the vcpu
- on preemption, we deschedule the VPE by making it invalid on
the RD
However, we are preemptible between the first two steps. If it so
happens *and* that the RD was still scanning, we nonetheless write
to the GICR_VPENDBASER register while Dirty is set, and bad things
happen (we're in UNPRED land).
This affects both the 4.0 and 4.1 implementations.
Make sure Dirty is cleared before performing the deschedule,
meaning that its_clear_vpend_valid() becomes a sort of full VPE
residency barrier.
Reported-by: Jingyi Wang <wangjingyi11@huawei.com>
Tested-by: Nianyao Tang <tangnianyao@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: 57e3cebd02 ("KVM: arm64: Delay the polling of the GICR_VPENDBASER.Dirty bit")
Link: https://lore.kernel.org/r/4aae10ba-b39a-5f84-754b-69c2eb0a2c03@huawei.com
If MAILBOX is n, building fails:
drivers/irqchip/irq-qcom-mpm.o: In function `mpm_pd_power_off':
irq-qcom-mpm.c:(.text+0x174): undefined reference to `mbox_send_message'
irq-qcom-mpm.c:(.text+0x174): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `mbox_send_message'
Make QCOM_MPM depends on MAILBOX to fix this.
Fixes: a6199bb514 ("irqchip: Add Qualcomm MPM controller driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220317131956.30004-1-yuehaibing@huawei.com
In 6f98a4bfee ("random: block in /dev/urandom"), we tried to make a
successful try_to_generate_entropy() call *required* if the RNG was not
already initialized. Unfortunately, weird architectures and old
userspaces combined in TCG test harnesses, making that change still not
realistic, so it was reverted in 0313bc278d ("Revert "random: block in
/dev/urandom"").
However, rather than making a successful try_to_generate_entropy() call
*required*, we can instead make it *best-effort*.
If try_to_generate_entropy() fails, it fails, and nothing changes from
the current behavior. If it succeeds, then /dev/urandom becomes safe to
use for free. This way, we don't risk the regression potential that led
to us reverting the required-try_to_generate_entropy() call before.
Practically speaking, this means that at least on x86, /dev/urandom
becomes safe. Probably other architectures with working cycle counters
will also become safe. And architectures with slow or broken cycle
counters at least won't be affected at all by this change.
So it may not be the glorious "all things are unified!" change we were
hoping for initially, but practically speaking, it makes a positive
impact.
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Now that all in-kernel users of default_attrs for the kobj_type are gone
and converted to properly use the default_groups pointer instead, it can
be safely removed.
There is one standard way to create sysfs files in a kobj_type, and not
two like before, causing confusion as to which should be used.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20220106133151.607703-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the pseries vas sysfs code to use default_groups field
which has been the preferred way since aa30f47cf6 ("kobject: Add
support for default attribute groups to kobj_type") so that we can soon
get rid of the obsolete default_attrs field.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Haren Myneni <haren@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20220329142552.558339-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
