This adds a kernel command line option that can be used to disable GTSE support.
Disabling GTSE implies kernel will make hcalls to invalidate TLB entries.
This was done so that we can do VM migration between configs that enable/disable
GTSE support via hypervisor. To migrate a VM from a system that supports
GTSE to a system that doesn't, we can boot the guest with
radix_hcall_invalidate=on, thereby forcing the guest to use hcalls for TLB
invalidates.
The check for hcall availability is done in pSeries_setup_arch so that
the panic message appears on the console. This should only happen on
a hypervisor that doesn't force the guest to hash translation even
though it can't handle the radix GTSE=0 request via CAS. With
radix_hcall_invalidate=on if the hypervisor doesn't support hcall_rpt_invalidate
hcall it should force the LPAR to hash translation.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Tested-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727085908.420806-1-aneesh.kumar@linux.ibm.com
Current kernel gives:
[ 0.000000] cma: Reserved 26224 MiB at 0x0000007959000000
[ 0.000000] hugetlb_cma: reserve 65536 MiB, up to 16384 MiB per node
[ 0.000000] cma: Reserved 16384 MiB at 0x0000001800000000
With the fix
[ 0.000000] kvm_cma_reserve: reserving 26214 MiB for global area
[ 0.000000] cma: Reserved 26224 MiB at 0x0000007959000000
[ 0.000000] hugetlb_cma: reserve 65536 MiB, up to 16384 MiB per node
[ 0.000000] cma: Reserved 16384 MiB at 0x0000001800000000
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200713150749.25245-2-aneesh.kumar@linux.ibm.com
commit: cf11e85fc0 ("mm: hugetlb: optionally allocate gigantic hugepages using cma")
added support for allocating gigantic hugepages using CMA. This patch
enables the same for powerpc
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200713150749.25245-1-aneesh.kumar@linux.ibm.com
Data Cache Block Invalidate (dcbi) instruction implemented back in
PowerPC architecture version 2.03. But as per Power Processor Users Manual
it is obsolete and not supported by POWER8/POWER9 core. Attempt to use of
this illegal instruction results in a hypervisor emulation assistance
interrupt. So, ifdef it out the option `i` in xmon for 64bit Book3S.
0:mon> fi
cpu 0x0: Vector: 700 (Program Check) at [c000000003be74a0]
pc: c000000000102030: cacheflush+0x180/0x1a0
lr: c000000000101f3c: cacheflush+0x8c/0x1a0
sp: c000000003be7730
msr: 8000000000081033
current = 0xc0000000035e5c00
paca = 0xc000000001910000 irqmask: 0x03 irq_happened: 0x01
pid = 1025, comm = bash
Linux version 5.6.0-rc5-g5aa19adac (root@ltc-wspoon6) (gcc version 7.4.0
(Ubuntu 7.4.0-1ubuntu1~18.04.1)) #1 SMP Tue Mar 10 04:38:41 CDT 2020
cpu 0x0: Exception 700 (Program Check) in xmon, returning to main loop
[c000000003be7c50] c00000000084abb0 __handle_sysrq+0xf0/0x2a0
[c000000003be7d00] c00000000084b3c0 write_sysrq_trigger+0xb0/0xe0
[c000000003be7d30] c0000000004d1edc proc_reg_write+0x8c/0x130
[c000000003be7d60] c00000000040dc7c __vfs_write+0x3c/0x70
[c000000003be7d80] c000000000410e70 vfs_write+0xd0/0x210
[c000000003be7dd0] c00000000041126c ksys_write+0xdc/0x130
[c000000003be7e20] c00000000000b9d0 system_call+0x5c/0x68
--- Exception: c01 (System Call) at 00007fffa345e420
SP (7ffff0b08ab0) is in userspace
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200330075954.538773-1-bala24@linux.ibm.com
There's a comment in time.h referring to CONFIG_POWER, which doesn't
exist. That confuses scripts/checkkconfigsymbols.py.
Presumably the comment was referring to a CONFIG_POWER vs CONFIG_PPC,
in which case for CONFIG_POWER we would #define __USE_RTC to 1. But
instead we have CONFIG_PPC_BOOK3S_601, and these days we have
IS_ENABLED().
So the comment is no longer relevant, drop it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131728.1643966-9-mpe@ellerman.id.au
Commit 866bfc75f4 ("powerpc: conditionally compile platform-specific
serial drivers") made some code depend on CONFIG_PPC_MPC52XX, which
doesn't exist.
Fix it to use CONFIG_PPC_MPC52xx.
Fixes: 866bfc75f4 ("powerpc: conditionally compile platform-specific serial drivers")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131728.1643966-7-mpe@ellerman.id.au
All 32 and 64-bit builds that don't have CONFIG_TAU_INT enabled (all
of them), get a definition of TAUException() in traps.c.
On 64-bit it's completely useless, and just wastes ~120 bytes of text.
On 32-bit it allows the kernel to link because head_32.S calls it
unconditionally.
Instead follow the example of altivec_assist_exception(), and if
CONFIG_TAU_INT is not enabled just point it at unknown_exception using
the preprocessor.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131728.1643966-6-mpe@ellerman.id.au
We have two uses of CONFIG_BOOK3S_601, which doesn't exist. Fix them
to use CONFIG_PPC_BOOK3S_601 which is the correct symbol.
Fixes: 12c3f1fd87 ("powerpc/32s: get rid of CPU_FTR_601 feature")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131728.1643966-5-mpe@ellerman.id.au
This code was merged 11 years ago in commit 13363ab9b9 ("powerpc:
Add definitions used by exception handling on 64-bit Book3E") but was
never able to be built because CONFIG_BOOK3E_MMU_TLB_STATS never
existed. Remove it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131728.1643966-4-mpe@ellerman.id.au
There's a comment in lite5200_sleep.S that refers to "CONFIG_BDI*".
This confuses scripts/checkkconfigsymbols.py, which thinks it should
be able to find CONFIG_BDI.
Change the comment to refer to CONFIG_BDI_SWITCH which is presumably
roughly what it was referring to. AFAICS there never has been a
CONFIG_BDI.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131728.1643966-3-mpe@ellerman.id.au
During memory hotplug and unplug, resize_hpt_for_hotplug() gets called
for both hash and radix guests but it should be called only for hash
guests. Though the call does nothing in the radix guest case, it is
cleaner to push this call into hash specific memory hotplug routines.
Reported-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727095704.1432916-1-bharata@linux.ibm.com
We have powerpc specific logic in our page fault handling to decide if
an access to an unmapped address below the stack pointer should expand
the stack VMA.
The logic aims to prevent userspace from doing bad accesses below the
stack pointer. However as long as the stack is < 1MB in size, we allow
all accesses without further checks. Adding some debug I see that I
can do a full kernel build and LTP run, and not a single process has
used more than 1MB of stack. So for the majority of processes the
logic never even fires.
We also recently found a nasty bug in this code which could cause
userspace programs to be killed during signal delivery. It went
unnoticed presumably because most processes use < 1MB of stack.
The generic mm code has also grown support for stack guard pages since
this code was originally written, so the most heinous case of the
stack expanding into other mappings is now handled for us.
Finally although some other arches have special logic in this path,
from what I can tell none of x86, arm64, arm and s390 impose any extra
checks other than those in expand_stack().
So drop our complicated logic and like other architectures just let
the stack expand as long as its within the rlimit.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Daniel Axtens <dja@axtens.net>
Link: https://lore.kernel.org/r/20200724092528.1578671-4-mpe@ellerman.id.au
We have powerpc specific logic in our page fault handling to decide if
an access to an unmapped address below the stack pointer should expand
the stack VMA.
The code was originally added in 2004 "ported from 2.4". The rough
logic is that the stack is allowed to grow to 1MB with no extra
checking. Over 1MB the access must be within 2048 bytes of the stack
pointer, or be from a user instruction that updates the stack pointer.
The 2048 byte allowance below the stack pointer is there to cover the
288 byte "red zone" as well as the "about 1.5kB" needed by the signal
delivery code.
Unfortunately since then the signal frame has expanded, and is now
4224 bytes on 64-bit kernels with transactional memory enabled. This
means if a process has consumed more than 1MB of stack, and its stack
pointer lies less than 4224 bytes from the next page boundary, signal
delivery will fault when trying to expand the stack and the process
will see a SEGV.
The total size of the signal frame is the size of struct rt_sigframe
(which includes the red zone) plus __SIGNAL_FRAMESIZE (128 bytes on
64-bit).
The 2048 byte allowance was correct until 2008 as the signal frame
was:
struct rt_sigframe {
struct ucontext uc; /* 0 1440 */
/* --- cacheline 11 boundary (1408 bytes) was 32 bytes ago --- */
long unsigned int _unused[2]; /* 1440 16 */
unsigned int tramp[6]; /* 1456 24 */
struct siginfo * pinfo; /* 1480 8 */
void * puc; /* 1488 8 */
struct siginfo info; /* 1496 128 */
/* --- cacheline 12 boundary (1536 bytes) was 88 bytes ago --- */
char abigap[288]; /* 1624 288 */
/* size: 1920, cachelines: 15, members: 7 */
/* padding: 8 */
};
1920 + 128 = 2048
Then in commit ce48b21007 ("powerpc: Add VSX context save/restore,
ptrace and signal support") (Jul 2008) the signal frame expanded to
2304 bytes:
struct rt_sigframe {
struct ucontext uc; /* 0 1696 */ <--
/* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
long unsigned int _unused[2]; /* 1696 16 */
unsigned int tramp[6]; /* 1712 24 */
struct siginfo * pinfo; /* 1736 8 */
void * puc; /* 1744 8 */
struct siginfo info; /* 1752 128 */
/* --- cacheline 14 boundary (1792 bytes) was 88 bytes ago --- */
char abigap[288]; /* 1880 288 */
/* size: 2176, cachelines: 17, members: 7 */
/* padding: 8 */
};
2176 + 128 = 2304
At this point we should have been exposed to the bug, though as far as
I know it was never reported. I no longer have a system old enough to
easily test on.
Then in 2010 commit 320b2b8de1 ("mm: keep a guard page below a
grow-down stack segment") caused our stack expansion code to never
trigger, as there was always a VMA found for a write up to PAGE_SIZE
below r1.
That meant the bug was hidden as we continued to expand the signal
frame in commit 2b0a576d15 ("powerpc: Add new transactional memory
state to the signal context") (Feb 2013):
struct rt_sigframe {
struct ucontext uc; /* 0 1696 */
/* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
struct ucontext uc_transact; /* 1696 1696 */ <--
/* --- cacheline 26 boundary (3328 bytes) was 64 bytes ago --- */
long unsigned int _unused[2]; /* 3392 16 */
unsigned int tramp[6]; /* 3408 24 */
struct siginfo * pinfo; /* 3432 8 */
void * puc; /* 3440 8 */
struct siginfo info; /* 3448 128 */
/* --- cacheline 27 boundary (3456 bytes) was 120 bytes ago --- */
char abigap[288]; /* 3576 288 */
/* size: 3872, cachelines: 31, members: 8 */
/* padding: 8 */
/* last cacheline: 32 bytes */
};
3872 + 128 = 4000
And commit 573ebfa660 ("powerpc: Increase stack redzone for 64-bit
userspace to 512 bytes") (Feb 2014):
struct rt_sigframe {
struct ucontext uc; /* 0 1696 */
/* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
struct ucontext uc_transact; /* 1696 1696 */
/* --- cacheline 26 boundary (3328 bytes) was 64 bytes ago --- */
long unsigned int _unused[2]; /* 3392 16 */
unsigned int tramp[6]; /* 3408 24 */
struct siginfo * pinfo; /* 3432 8 */
void * puc; /* 3440 8 */
struct siginfo info; /* 3448 128 */
/* --- cacheline 27 boundary (3456 bytes) was 120 bytes ago --- */
char abigap[512]; /* 3576 512 */ <--
/* size: 4096, cachelines: 32, members: 8 */
/* padding: 8 */
};
4096 + 128 = 4224
Then finally in 2017, commit 1be7107fbe ("mm: larger stack guard
gap, between vmas") exposed us to the existing bug, because it changed
the stack VMA to be the correct/real size, meaning our stack expansion
code is now triggered.
Fix it by increasing the allowance to 4224 bytes.
Hard-coding 4224 is obviously unsafe against future expansions of the
signal frame in the same way as the existing code. We can't easily use
sizeof() because the signal frame structure is not in a header. We
will either fix that, or rip out all the custom stack expansion
checking logic entirely.
Fixes: ce48b21007 ("powerpc: Add VSX context save/restore, ptrace and signal support")
Cc: stable@vger.kernel.org # v2.6.27+
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Tested-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724092528.1578671-2-mpe@ellerman.id.au
KVM guests have certain restrictions and performance quirks when using
doorbells. This patch moves the EPAPR KVM guest test so it can be shared
with PSERIES, and uses that in doorbell setup code to apply the KVM
guest quirks and improves IPI performance for two cases:
- PowerVM guests may now use doorbells even if they are secure.
- KVM guests no longer use doorbells if XIVE is available.
There is a valid complaint that "KVM guest" is not a very reasonable
thing to test for, it's preferable for the hypervisor to advertise
particular behaviours to the guest so they could change if the
hypervisor implementation or configuration changes. However in this case
we were already assuming a KVM guest worst case, so this patch is about
containing those quirks. If KVM later advertises fast doorbells, we
should test for that and override the quirks.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200726035155.1424103-4-npiggin@gmail.com
KVM supports msgsndp in guests by trapping and emulating the
instruction, so it was decided to always use XIVE for IPIs if it is
available. However on PowerVM systems, msgsndp can be used and gives
better performance. On large systems, high XIVE interrupt rates can
have sub-linear scaling, and using msgsndp can reduce the load on
the interrupt controller.
So switch to using core local doorbells even if XIVE is available.
This reduces performance for KVM guests with an SMT topology by
about 50% for ping-pong context switching between SMT vCPUs. An
option vector (or dt-cpu-ftrs) could be defined to disable msgsndp
to get KVM performance back.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200726035155.1424103-3-npiggin@gmail.com
These are only called in one place for a given platform, so inline
them for performance.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
[mpe: Fix build errors related to KVM]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200726035155.1424103-2-npiggin@gmail.com
Commit 9908c826d5 ("powerpc/perf: Add Power10 PMU feature to DT CPU
features") defines MMCRA_BHRB_DISABLE as `0x2000000000UL`. Binutils
version less than 2.28 doesn't support UL suffix.
arch/powerpc/kernel/cpu_setup_power.S: Assembler messages:
arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')'
arch/powerpc/kernel/cpu_setup_power.S:250: Error: junk at end of line, first unrecognized character is `L'
arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')'
arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')'
arch/powerpc/kernel/cpu_setup_power.S:250: Error: junk at end of line, first unrecognized character is `L'
arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')'
arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')'
arch/powerpc/kernel/cpu_setup_power.S:250: Error: operand out of range (0x0000002000000000 is not between 0xffffffffffff8000 and 0x000000000000ffff)
Fix this by wrapping it with the `_UL` macro.
Fixes: 9908c826d5 ("Add Power10 PMU feature to DT CPU features")
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1595996214-5833-1-git-send-email-atrajeev@linux.vnet.ibm.com
The src_owner field in struct migrate_vma is being used for two purposes,
it acts as a selection filter for which types of pages are to be migrated
and it identifies device private pages owned by the caller.
Split this into separate parameters so the src_owner field can be used
just to identify device private pages owned by the caller of
migrate_vma_setup().
Rename the src_owner field to pgmap_owner to reflect it is now used only
to identify which device private pages to migrate.
Link: https://lore.kernel.org/r/20200723223004.9586-3-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When a secure memslot is dropped, all the pages backed in the secure
device (aka really backed by secure memory by the Ultravisor)
should be paged out to a normal page. Previously, this was
achieved by triggering the page fault mechanism which is calling
kvmppc_svm_page_out() on each pages.
This can't work when hot unplugging a memory slot because the memory
slot is flagged as invalid and gfn_to_pfn() is then not trying to access
the page, so the page fault mechanism is not triggered.
Since the final goal is to make a call to kvmppc_svm_page_out() it seems
simpler to call directly instead of triggering such a mechanism. This
way kvmppc_uvmem_drop_pages() can be called even when hot unplugging a
memslot.
Since kvmppc_uvmem_drop_pages() is already holding kvm->arch.uvmem_lock,
the call to __kvmppc_svm_page_out() is made. As
__kvmppc_svm_page_out needs the vma pointer to migrate the pages,
the VMA is fetched in a lazy way, to not trigger find_vma() all
the time. In addition, the mmap_sem is held in read mode during
that time, not in write mode since the virual memory layout is not
impacted, and kvm->arch.uvmem_lock prevents concurrent operation
on the secure device.
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
[modified check on the VMA in kvmppc_uvmem_drop_pages]
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
[modified the changelog description]
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
kvmppc_svm_page_out() will need to be called by kvmppc_uvmem_drop_pages()
so move it up earlier in this file.
Furthermore it will be interesting to call this function when already
holding the kvm->arch.uvmem_lock, so prefix the original function with __
and remove the locking in it, and introduce a wrapper which call that
function with the lock held.
There is no functional change.
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
When a memory slot is hot plugged to a SVM, PFNs associated with the
GFNs in that slot must be migrated to the secure-PFNs, aka device-PFNs.
Call kvmppc_uv_migrate_mem_slot() to accomplish this.
Disable page-merge for all pages in the memory slot.
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
[rearranged the code, and modified the commit log]
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The Ultravisor is expected to explicitly call H_SVM_PAGE_IN for all the
pages of the SVM before calling H_SVM_INIT_DONE. This causes a huge
delay in tranistioning the VM to SVM. The Ultravisor is only interested
in the pages that contain the kernel, initrd and other important data
structures. The rest contain throw-away content.
However if not all pages are requested by the Ultravisor, the Hypervisor
continues to consider the GFNs corresponding to the non-requested pages
as normal GFNs. This can lead to data-corruption and undefined behavior.
In H_SVM_INIT_DONE handler, move all the PFNs associated with the SVM's
GFNs to secure-PFNs. Skip the GFNs that are already Paged-in or Shared
or Paged-in followed by a Paged-out.
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
During the life of SVM, its GFNs transition through normal, secure and
shared states. Since the kernel does not track GFNs that are shared, it
is not possible to disambiguate a shared GFN from a GFN whose PFN has
not yet been migrated to a secure-PFN. Also it is not possible to
disambiguate a secure-GFN from a GFN whose GFN has been pagedout from
the ultravisor.
The ability to identify the state of a GFN is needed to skip migration
of its PFN to secure-PFN during ESM transition.
The code is re-organized to track the states of a GFN as explained
below.
************************************************************************
1. States of a GFN
---------------
The GFN can be in one of the following states.
(a) Secure - The GFN is secure. The GFN is associated with
a Secure VM, the contents of the GFN is not accessible
to the Hypervisor. This GFN can be backed by a secure-PFN,
or can be backed by a normal-PFN with contents encrypted.
The former is true when the GFN is paged-in into the
ultravisor. The latter is true when the GFN is paged-out
of the ultravisor.
(b) Shared - The GFN is shared. The GFN is associated with a
a secure VM. The contents of the GFN is accessible to
Hypervisor. This GFN is backed by a normal-PFN and its
content is un-encrypted.
(c) Normal - The GFN is a normal. The GFN is associated with
a normal VM. The contents of the GFN is accesible to
the Hypervisor. Its content is never encrypted.
2. States of a VM.
---------------
(a) Normal VM: A VM whose contents are always accessible to
the hypervisor. All its GFNs are normal-GFNs.
(b) Secure VM: A VM whose contents are not accessible to the
hypervisor without the VM's consent. Its GFNs are
either Shared-GFN or Secure-GFNs.
(c) Transient VM: A Normal VM that is transitioning to secure VM.
The transition starts on successful return of
H_SVM_INIT_START, and ends on successful return
of H_SVM_INIT_DONE. This transient VM, can have GFNs
in any of the three states; i.e Secure-GFN, Shared-GFN,
and Normal-GFN. The VM never executes in this state
in supervisor-mode.
3. Memory slot State.
------------------
The state of a memory slot mirrors the state of the
VM the memory slot is associated with.
4. VM State transition.
--------------------
A VM always starts in Normal Mode.
H_SVM_INIT_START moves the VM into transient state. During this
time the Ultravisor may request some of its GFNs to be shared or
secured. So its GFNs can be in one of the three GFN states.
H_SVM_INIT_DONE moves the VM entirely from transient state to
secure-state. At this point any left-over normal-GFNs are
transitioned to Secure-GFN.
H_SVM_INIT_ABORT moves the transient VM back to normal VM.
All its GFNs are moved to Normal-GFNs.
UV_TERMINATE transitions the secure-VM back to normal-VM. All
the secure-GFN and shared-GFNs are tranistioned to normal-GFN
Note: The contents of the normal-GFN is undefined at this point.
5. GFN state implementation:
-------------------------
Secure GFN is associated with a secure-PFN; also called uvmem_pfn,
when the GFN is paged-in. Its pfn[] has KVMPPC_GFN_UVMEM_PFN flag
set, and contains the value of the secure-PFN.
It is associated with a normal-PFN; also called mem_pfn, when
the GFN is pagedout. Its pfn[] has KVMPPC_GFN_MEM_PFN flag set.
The value of the normal-PFN is not tracked.
Shared GFN is associated with a normal-PFN. Its pfn[] has
KVMPPC_UVMEM_SHARED_PFN flag set. The value of the normal-PFN
is not tracked.
Normal GFN is associated with normal-PFN. Its pfn[] has
no flag set. The value of the normal-PFN is not tracked.
6. Life cycle of a GFN
--------------------
--------------------------------------------------------------
| | Share | Unshare | SVM |H_SVM_INIT_DONE|
| |operation |operation | abort/ | |
| | | | terminate | |
-------------------------------------------------------------
| | | | | |
| Secure | Shared | Secure |Normal |Secure |
| | | | | |
| Shared | Shared | Secure |Normal |Shared |
| | | | | |
| Normal | Shared | Secure |Normal |Secure |
--------------------------------------------------------------
7. Life cycle of a VM
--------------------
--------------------------------------------------------------------
| | start | H_SVM_ |H_SVM_ |H_SVM_ |UV_SVM_ |
| | VM |INIT_START|INIT_DONE|INIT_ABORT |TERMINATE |
| | | | | | |
--------- ----------------------------------------------------------
| | | | | | |
| Normal | Normal | Transient|Error |Error |Normal |
| | | | | | |
| Secure | Error | Error |Error |Error |Normal |
| | | | | | |
|Transient| N/A | Error |Secure |Normal |Normal |
--------------------------------------------------------------------
************************************************************************
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Page-merging of pages in memory-slots associated with a Secure VM
is disabled in H_SVM_PAGE_IN handler.
This operation should have been done the much earlier; the moment the VM
is initiated for secure-transition. Delaying this operation increases
the probability for those pages to acquire new references, making it
impossible to migrate those pages in H_SVM_PAGE_IN handler.
Disable page-migration in H_SVM_INIT_START handling.
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Without this fix, git is confused. It generates wrong
function context for code changes in subsequent patches.
Weird, but true.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Note: compat variant of REGSET_TM_CGPR is almost certainly wrong;
it claims to be 48*64bit, but just as compat REGSET_GPR it stores
44*32bit of (truncated) registers + 4 32bit zeros... followed by
48 more 32bit zeroes. Might be too late to change - it's a userland
ABI, after all ;-/
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
all uses are conditional upon ELF_CORE_COPY_XFPREGS, which has not
been defined on any architecture since 2010
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
skiroot_defconfig fails:
arch/powerpc/kernel/fadump.c:48:17: error: ‘cpus_in_fadump’ defined but not used
48 | static atomic_t cpus_in_fadump;
Fix it by moving the definition into the #ifdef where it's used.
Fixes: ba608c4fa1 ("powerpc/fadump: fix race between pstore write and fadump crash trigger")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727070341.595634-1-mpe@ellerman.id.au
Commit 2f92447f9f ("powerpc/book3s64/hash: Use the pte_t address from the
caller") removed the local_irq_disable from hash_preload, but it was
required for more than just the page table walk: the hash pte busy bit is
effectively a lock which may be taken in interrupt context, and the local
update flag test must not be preempted before it's used.
This solves apparent lockups with perf interrupting __hash_page_64K. If
get_perf_callchain then also takes a hash fault on the same page while it
is already locked, it will loop forever taking hash faults, which looks like
this:
cpu 0x49e: Vector: 100 (System Reset) at [c00000001a4f7d70]
pc: c000000000072dc8: hash_page_mm+0x8/0x800
lr: c00000000000c5a4: do_hash_page+0x24/0x38
sp: c0002ac1cc69ac70
msr: 8000000000081033
current = 0xc0002ac1cc602e00
paca = 0xc00000001de1f280 irqmask: 0x03 irq_happened: 0x01
pid = 20118, comm = pread2_processe
Linux version 5.8.0-rc6-00345-g1fad14f18bc6
49e:mon> t
[c0002ac1cc69ac70] c00000000000c5a4 do_hash_page+0x24/0x38 (unreliable)
--- Exception: 300 (Data Access) at c00000000008fa60 __copy_tofrom_user_power7+0x20c/0x7ac
[link register ] c000000000335d10 copy_from_user_nofault+0xf0/0x150
[c0002ac1cc69af70] c00032bf9fa3c880 (unreliable)
[c0002ac1cc69afa0] c000000000109df0 read_user_stack_64+0x70/0xf0
[c0002ac1cc69afd0] c000000000109fcc perf_callchain_user_64+0x15c/0x410
[c0002ac1cc69b060] c000000000109c00 perf_callchain_user+0x20/0x40
[c0002ac1cc69b080] c00000000031c6cc get_perf_callchain+0x25c/0x360
[c0002ac1cc69b120] c000000000316b50 perf_callchain+0x70/0xa0
[c0002ac1cc69b140] c000000000316ddc perf_prepare_sample+0x25c/0x790
[c0002ac1cc69b1a0] c000000000317350 perf_event_output_forward+0x40/0xb0
[c0002ac1cc69b220] c000000000306138 __perf_event_overflow+0x88/0x1a0
[c0002ac1cc69b270] c00000000010cf70 record_and_restart+0x230/0x750
[c0002ac1cc69b620] c00000000010d69c perf_event_interrupt+0x20c/0x510
[c0002ac1cc69b730] c000000000027d9c performance_monitor_exception+0x4c/0x60
[c0002ac1cc69b750] c00000000000b2f8 performance_monitor_common_virt+0x1b8/0x1c0
--- Exception: f00 (Performance Monitor) at c0000000000cb5b0 pSeries_lpar_hpte_insert+0x0/0x160
[link register ] c0000000000846f0 __hash_page_64K+0x210/0x540
[c0002ac1cc69ba50] 0000000000000000 (unreliable)
[c0002ac1cc69bb00] c000000000073ae0 update_mmu_cache+0x390/0x3a0
[c0002ac1cc69bb70] c00000000037f024 wp_page_copy+0x364/0xce0
[c0002ac1cc69bc20] c00000000038272c do_wp_page+0xdc/0xa60
[c0002ac1cc69bc70] c0000000003857bc handle_mm_fault+0xb9c/0x1b60
[c0002ac1cc69bd50] c00000000006c434 __do_page_fault+0x314/0xc90
[c0002ac1cc69be20] c00000000000c5c8 handle_page_fault+0x10/0x2c
--- Exception: 300 (Data Access) at 00007fff8c861fe8
SP (7ffff6b19660) is in userspace
Fixes: 2f92447f9f ("powerpc/book3s64/hash: Use the pte_t address from the caller")
Reported-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reported-by: Anton Blanchard <anton@ozlabs.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727060947.10060-1-npiggin@gmail.com
In note_page(), the pg_state is updated the same way in two places.
Add note_page_update_state() to do it.
Also include the display of boundary markers there as it is missing
"no level" leg, leading to a mismatch when the first two markers
are at the same address and the first displayed area uses that
address.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a284a809f01c705bbaab303b06fda216f147a99a.1593429426.git.christophe.leroy@csgroup.eu
When STRICT_KERNEL_RWX is set, we want to set NX bit on vmalloc
segments. But modules require exec.
Use a dedicated segment for modules. There is not much space
above kernel, and we don't waste vmalloc space to do alignment.
Therefore, we take the segment before PAGE_OFFSET for modules.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/eb8faba9148b6cf17c696ba776b4e8ee2f6313bf.1593428200.git.christophe.leroy@csgroup.eu
User space stops at TASK_SIZE. At the moment, kernel space starts
at PAGE_OFFSET.
In order to use space between TASK_SIZE and PAGE_OFFSET for modules,
make TASK_SIZE the limit between user and kernel space.
Note that fault.c already considers TASK_SIZE as the boundary between
user and kernel space.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b38b52cd8dabbb56fbd6f9219d6f3cdccbb43b44.1593428200.git.christophe.leroy@csgroup.eu
In order to allow allocation of modules outside of vmalloc space,
use MODULES_VADDR and MODULES_END when MODULES_VADDR is defined.
Redefine module_alloc() when MODULES_VADDR defined.
Unmap corresponding KASAN shadow memory.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7ecf5fff1eef67d450e73fc412b6ec3818483d75.1593428200.git.christophe.leroy@csgroup.eu
The sparse tool complains as follows:
arch/powerpc/platforms/pseries/papr_scm.c:97:1: warning:
symbol 'papr_nd_regions' was not declared. Should it be static?
arch/powerpc/platforms/pseries/papr_scm.c:98:1: warning:
symbol 'papr_ndr_lock' was not declared. Should it be static?
Those variables are not used outside of papr_scm.c, so this
commit marks them static.
Fixes: 85343a8da2 ("powerpc/papr/scm: Add bad memory ranges to nvdimm bad ranges")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725091949.75234-1-weiyongjun1@huawei.com
Clang's objdump emits slightly different output from GNU's objdump,
causing a list of warnings to be emitted during relocatable builds.
E.g., clang's objdump emits this:
c000000000000004: 2c 00 00 48 b 0xc000000000000030
...
c000000000005c6c: 10 00 82 40 bf 2, 0xc000000000005c7c
while GNU objdump emits:
c000000000000004: 2c 00 00 48 b c000000000000030 <__start+0x30>
...
c000000000005c6c: 10 00 82 40 bne c000000000005c7c <masked_interrupt+0x3c>
Adjust llvm-objdump's output to remove the extraneous '0x' and convert
'bf' and 'bt' to 'bne' and 'beq' resp. to more closely match GNU
objdump's output.
Note that clang's objdump doesn't yet output the relocation symbols on
PPC.
Signed-off-by: Bill Wendling <morbo@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/191c67db31264b69cf6b566fd69851beb3dd0abb.1595630874.git.morbo@google.com
This implements smp_cond_load_relaxed() with the slowpath busy loop
using the preferred SMT priority pattern.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Waiman Long <longman@redhat.com>
[mpe: Make it 64-bit only to fix build errors on 32-bit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131423.1362108-7-npiggin@gmail.com
This brings the behaviour of the uncontended fast path back to roughly
equivalent to simple spinlocks -- a single atomic op with lock hint.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131423.1362108-6-npiggin@gmail.com
This implements the generic paravirt qspinlocks using H_PROD and
H_CONFER to kick and wait.
This uses an un-directed yield to any CPU rather than the directed
yield to a pre-empted lock holder that paravirtualised simple
spinlocks use, that requires no kick hcall. This is something that
could be investigated and improved in future.
Performance results can be found in the commit which added queued
spinlocks.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131423.1362108-5-npiggin@gmail.com
These have shown significantly improved performance and fairness when
spinlock contention is moderate to high on very large systems.
With this series including subsequent patches, on a 16 socket 1536
thread POWER9, a stress test such as same-file open/close from all
CPUs gets big speedups, 11620op/s aggregate with simple spinlocks vs
384158op/s (33x faster), where the difference in throughput between
the fastest and slowest thread goes from 7x to 1.4x.
Thanks to the fast path being identical in terms of atomics and
barriers (after a subsequent optimisation patch), single threaded
performance is not changed (no measurable difference).
On smaller systems, performance and fairness seems to be generally
improved. Using dbench on tmpfs as a test (that starts to run into
kernel spinlock contention), a 2-socket OpenPOWER POWER9 system was
tested with bare metal and KVM guest configurations. Results can be
found here:
https://github.com/linuxppc/issues/issues/305#issuecomment-663487453
Observations are:
- Queued spinlocks are equal when contention is insignificant, as
expected and as measured with microbenchmarks.
- When there is contention, on bare metal queued spinlocks have better
throughput and max latency at all points.
- When virtualised, queued spinlocks are slightly worse approaching
peak throughput, but significantly better throughput and max latency
at all points beyond peak, until queued spinlock maximum latency
rises when clients are 2x vCPUs.
The regressions haven't been analysed very well yet, there are a lot
of things that can be tuned, particularly the paravirtualised locking,
but the numbers already look like a good net win even on relatively
small systems.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131423.1362108-4-npiggin@gmail.com
To prepare for queued spinlocks. This is a simple rename except to
update preprocessor guard name and a file reference.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131423.1362108-3-npiggin@gmail.com
These functions will be used by the queued spinlock implementation,
and may be useful elsewhere too, so move them out of spinlock.h.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131423.1362108-2-npiggin@gmail.com
MAX_NUMNODES is a theoretical maximum number of nodes thats is
supported by the kernel. Device tree properties exposes the number of
possible nodes on the current platform. The kernel would detected this
and would use it for most of its resource allocations. If the platform
now increases the nodes to over what was already exposed, then it may
lead to inconsistencies. Hence limit it to the already exposed nodes.
Suggested-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724105809.24733-1-srikar@linux.vnet.ibm.com
Initialize Monitor Mode Control Register 3 (MMCR3)
SPR which is new in power10. For PowerISA v3.1, BHRB disable
is controlled via Monitor Mode Control Register A (MMCRA) bit,
namely "BHRB Recording Disable (BHRBRD)". This patch also initializes
MMCRA BHRBRD to disable BHRB feature at boot for power10.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1595489557-2047-1-git-send-email-atrajeev@linux.vnet.ibm.com
Previously iov->vfs_expanded was used for two purposes.
1) To work out how much we need to multiple the per-VF BAR size to figure
out the total space required for the IOV BAR.
2) To indicate that IOV is not usable with this device (vfs_expanded == 0).
We don't really need the field for either since the multiple in 1) is
always the number PEs supported by the PHB. Similarly, we don't really need
it in 2) either since the IOV data field will be NULL if we can't use IOV
with the device.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-16-oohall@gmail.com
Using single PE BARs to map an SR-IOV BAR is really a choice about what
strategy to use when mapping a BAR. It doesn't make much sense for this to
be a global setting since a device might have one large BAR which needs to
be mapped with single PE windows and another smaller BAR that can be mapped
with a regular segmented window. Make the segmented vs single decision a
per-BAR setting and clean up the logic that decides which mode to use.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-15-oohall@gmail.com
Split up the logic so that we have one branch that handles setting up a
segmented window and another that handles setting up single PE windows for
each VF.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-14-oohall@gmail.com
I want to refactor the loop this code is currently inside of. Hoist it on
out.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-13-oohall@gmail.com
Remove the IODA2 PHB checks. We already assume IODA2 in several places so
there's not much point in wrapping most of the setup and teardown process
in an if block.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-12-oohall@gmail.com
Currently the iov->pe_num_map[] does one of two things depending on
whether single PE mode is being used or not. When it is, this contains an
array which maps a vf_index to the corresponding PE number. When single PE
mode is not being used this contains a scalar which is the base PE for the
set of enabled VFs (for for VFn is base + n).
The array was necessary because when calling pnv_ioda_alloc_pe() there is
no guarantee that the allocated PEs would be contigious. We can now
allocate contigious blocks of PEs so this is no longer an issue. This
allows us to drop the if (single_mode) {} .. else {} block scattered
through the SR-IOV code which is a nice clean up.
This also fixes a bug in pnv_pci_sriov_disable() which is the non-atomic
bitmap_clear() to manipulate the PE allocation map. Other users of the map
assume it will be accessed with atomic ops.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-11-oohall@gmail.com
Rework the PE allocation logic to allow allocating blocks of PEs rather
than individually. We'll use this to allocate contigious blocks of PEs for
the SR-IOVs.
This patch also adds code to pnv_ioda_alloc_pe() and pnv_ioda_reserve_pe() to
use the existing, but unused, phb->pe_alloc_mutex. Currently these functions
use atomic bit ops to release a currently allocated PE number. However,
the pnv_ioda_alloc_pe() wants to have exclusive access to the bit map while
scanning for hole large enough to accomodate the allocation size.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-10-oohall@gmail.com
The sequence required to use the single PE BAR mode is kinda janky and
requires a little explanation. The API was designed with P7-IOC style
windows where the setup process is something like:
1. Configure the window start / end address
2. Enable the window
3. Map the segments of each window to the PE
For Single PE BARs the process is:
1. Set the PE for segment zero on a disabled window
2. Set the range
3. Enable the window
Move the OPAL calls into their own helper functions where the quirks can be
contained.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-9-oohall@gmail.com
No need for the multi-dimensional arrays, just use a bitmap.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-8-oohall@gmail.com
This prevents SR-IOV being used by making the SR-IOV BAR resources
unallocatable. Rename it to reflect what it actually does.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-7-oohall@gmail.com
SR-IOV support on PowerNV is a byzantine maze of hooks. I have no idea
how anyone is supposed to know how it works except through a lot of
stuffering. Write up some docs about the overall story to help out
the next sucker^Wperson who needs to tinker with it.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-6-oohall@gmail.com
pci-ioda.c is getting a bit unwieldly due to the amount of stuff jammed in
there. The SR-IOV support can be extracted easily enough and is mostly
standalone, so move it into a separate file.
This patch also moves the PowerNV SR-IOV specific fields from pci_dn and
moves them into a platform specific structure. I'm not sure how they ended
up in there in the first place, but leaking platform specifics into common
code has proven to be a terrible idea so far so lets stop doing that.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-5-oohall@gmail.com
We pre-configure the m64 window for IODA1 as a 1-1 segment-PE mapping,
similar to PHB3. Currently the actual mapping of segments occurs in
pnv_ioda_pick_m64_pe(), but we can move it into pnv_ioda1_init_m64() and
drop the IODA1 specific code paths in the PE setup / teardown.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-4-oohall@gmail.com
There's an optimisation in the PE setup which skips performing DMA
setup for a PE if we only have bridges in a PE. The assumption being
that only "real" devices will DMA to system memory, which is probably
fair. However, if we start off with only bridge devices in a PE then
add a non-bridge device the new device won't be able to use DMA because
we never configured it.
Fix this (admittedly pretty weird) edge case by tracking whether we've done
the DMA setup for the PE or not. If a non-bridge device is added to the PE
(via rescan or hotplug, or whatever) we can set up DMA on demand.
This also means the only remaining user of the old "DMA Weight" code is
the IODA1 DMA setup code that it was originally added for, which is good.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-3-oohall@gmail.com
Currently we have these two functions:
pnv_pci_ioda2_release_dma_pe(), and
pnv_pci_ioda2_release_pe_dma()
The first is used when tearing down VF PEs and the other is used for normal
devices. There's very little difference between the two though. The latter
(non-VF) will skip a call to pnv_pci_ioda2_unset_window() unless
CONFIG_IOMMU_API=y is set. There's no real point in doing this so fold the
two together.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-2-oohall@gmail.com
Add a helper to go from a pci_bus structure to the pnv_phb that hosts
that bus. There's a lot of instances of the following pattern:
struct pci_controller *hose = pci_bus_to_host(pdev->bus);
struct pnv_phb *phb = hose->private_data;
Without any other uses of the pci_controller inside the function. This
is hard to read since it requires you to memorise the contents of the
private data fields and kind of error prone since it involves blindly
assigning a void pointer. Add a helper to make it more concise and
explicit.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-1-oohall@gmail.com
The EEH core has a concept of a "PE tree" to support PowerNV. The PE tree
follows the PCI bus structures because a reset asserted on an upstream
bridge will be propagated to the downstream bridges. On pseries there's a
1-1 correspondence between what the guest sees are a PHB and a PE so the
"tree" is really just a single node.
Current the EEH core is reponsible for setting up this PE tree which it
does by traversing the pci_dn tree. The structure of the pci_dn tree
matches the bus tree on PowerNV which leads to the PE tree being "correct"
this setup method doesn't make a whole lot of sense and it's actively
confusing for the pseries case where it doesn't really do anything.
We want to remove the dependence on pci_dn anyway so this patch move
choosing where to insert a new PE into the platform code rather than
being part of the generic EEH code. For PowerNV this simplifies the
tree building logic and removes the use of pci_dn. For pseries we
keep the existing logic. I'm not really convinced it does anything
due to the 1-1 PE-to-PHB correspondence so every device under that
PHB should be in the same PE, but I'd rather not remove it entirely
until we've had a chance to look at it more deeply.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-14-oohall@gmail.com
This is mostly just to make the subsequent diffs less noisy. No functional
changes.
One thing that needs calling out is the removal of the "config_addr"
variable and replacing it with edev->bdfn. The contents of edev->bdfn are
the same, however it's worth pointing out that what RTAS calls a
"config_addr" isn't the same as the bdfn. The config_addr is supposed to
be: <bus><devfn><reg> with each field being an 8 bit number. Various parts
of the EEH code use BDFN and "config_addr" as interchangeable quantities
even though they aren't really.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-13-oohall@gmail.com
The naming of eeh_{add_to|remove_from}_parent_pe() doesn't really reflect
what they actually do. If the PE referred to be edev->pe_config_addr
already exists under that PHB then the edev is added to that PE. However,
if the PE doesn't exist the a new one is created for the edev.
The bulk of the implementation of eeh_add_to_parent_pe() covers that
second case. Similarly, most of eeh_remove_from_parent_pe() is
determining when it's safe to delete a PE.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-12-oohall@gmail.com
The edev->class_code field is never referenced anywhere except for the
platform specific probe functions. The same information is available in
the pci_dev for PowerNV and in the pci_dn on pseries so we can remove
the field.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-11-oohall@gmail.com
Mechanical conversion of the eeh_ops interfaces to use eeh_dev to reference
a specific device rather than pci_dn. No functional changes.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-9-oohall@gmail.com
Mechanical conversion of the eeh_ops interfaces to use eeh_dev to reference
a specific device rather than pci_dn. No functional changes.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-8-oohall@gmail.com
Mechanical conversion of the eeh_ops interfaces to use eeh_dev to reference
a specific device rather than pci_dn. No functional changes.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-7-oohall@gmail.com
There's a bunch of strange things about this code. First up is that none of
the fields being written to are functional for a VF. The SR-IOV
specification lists then as "Reserved, but OS should preserve" so writing
new values to them doesn't do anything and is clearly wrong from a
correctness perspective.
However, since VFs are designed to be managed by the OS there is an
argument to be made that we should be saving and restoring some parts of
config space. We already sort of do that by saving the first 64 bytes of
config space in the eeh_dev (see eeh_dev->config_space[]). This is
inadequate since it doesn't even consider saving and restoring the PCI
capability structures. However, this is a problem with EEH in general and
that needs to be fixed for non-VF devices too.
There's no real reason to keep around this around so delete it.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-6-oohall@gmail.com
This is used in precisely one place which is in pseries specific platform
code. There's no need to have the callback in eeh_ops since the platform
chooses the EEH PE addresses anyway. The PowerNV implementation has always
been a stub too so remove it.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-5-oohall@gmail.com
The pci_dn->pe_number field is mainly used to track the IODA PE number of a
device on PowerNV. At some point it grew a user in the pseries SR-IOV
support which muddies the waters a bit, so remove it.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-4-oohall@gmail.com
Drivers that do not support the PCI error handling callbacks are handled by
tearing down the device and re-probing them. If the device being removed is
a virtual function then we need to know the VF index so it can be removed
using the pci_iov_{add|remove}_virtfn() API.
Currently this is handled by looking up the pci_dn, and using the vf_index
that was stashed there when the pci_dn for the VF was created in
pcibios_sriov_enable(). We would like to eliminate the use of pci_dn
outside of pseries though so we need to provide the generic EEH code with
some other way to find the vf_index.
The easiest thing to do here is move the vf_index field out of pci_dn and
into eeh_dev. Currently pci_dn and eeh_dev are allocated and initialized
together so this is a fairly minimal change in preparation for splitting
pci_dn and eeh_dev in the future.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-3-oohall@gmail.com
The only thing in this file is eeh_dev_init() which is allocates and
initialises an eeh_dev based on a pci_dn. This is only ever called from
pci_dn.c so move it into there and remove the file.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-2-oohall@gmail.com
This function is a one line wrapper around eeh_phb_pe_create() and despite
the name it doesn't create any eeh_dev structures. Replace it with direct
calls to eeh_phb_pe_create() since that does what it says on the tin
and removes a layer of indirection.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-1-oohall@gmail.com
Power10 has removed 512 bytes boundary from match criteria i.e. the watch
range can cross 512 bytes boundary.
Note: ISA 3.1 Book III 9.4 match criteria includes 512 byte limit but that
is a documentation mistake and hopefully will be fixed in the next version
of ISA. Though, ISA 3.1 change log mentions about removal of 512B boundary:
Multiple DEAW:
Added a second Data Address Watchpoint. [H]DAR is
set to the first byte of overlap. 512B boundary is
removed.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-11-ravi.bangoria@linux.ibm.com
So far Book3S Powerpc supported only one watchpoint. Power10 is
introducing 2nd DAWR. Enable 2nd DAWR support for Power10.
Availability of 2nd DAWR will depend on CPU_FTR_DAWR1.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-10-ravi.bangoria@linux.ibm.com
2nd DAWR can be set/unset using H_SET_MODE hcall with resource value 5.
Enable powervm guest support with that. This has no effect on kvm guest
because kvm will return error if guest does hcall with resource value 5.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-9-ravi.bangoria@linux.ibm.com
Current H_SET_MODE hcall macro name for setting/resetting DAWR0 is
H_SET_MODE_RESOURCE_SET_DAWR. Add suffix 0 to macro name as well.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-8-ravi.bangoria@linux.ibm.com
As per the PAPR, bit 0 of byte 64 in pa-features property indicates
availability of 2nd DAWR registers. i.e. If this bit is set, 2nd
DAWR is present, otherwise not. Host generally uses "cpu-features",
which masks "pa-features". But "cpu-features" are still not used for
guests and thus this change is mostly applicable for guests only.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-7-ravi.bangoria@linux.ibm.com
CPU_FTR_DAWR is by default enabled for host via CPU_FTRS_DT_CPU_BASE
(controlled by CONFIG_PPC_DT_CPU_FTRS). But cpu-features device-tree
node is not PAPR compatible and thus not yet used by kvm or pHyp
guests. Enable watchpoint functionality on power10 guest (both kvm
and powervm) by adding CPU_FTR_DAWR to CPU_FTRS_POWER10. Note that
this change does not enable 2nd DAWR support.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-5-ravi.bangoria@linux.ibm.com
'ea' returned by analyse_instr() needs to be aligned down to cache
block size for CACHEOP instructions. analyse_instr() does not set
size for CACHEOP, thus size also needs to be calculated manually.
Fixes: 27985b2a64 ("powerpc/watchpoint: Don't ignore extraneous exceptions blindly")
Fixes: 74c6881019 ("powerpc/watchpoint: Prepare handler to handle more than one watchpoint")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-4-ravi.bangoria@linux.ibm.com
Pedro Miraglia Franco de Carvalho noticed that on p8/p9, DAR value is
inconsistent with different type of load/store. Like for byte,word
etc. load/stores, DAR is set to the address of the first byte of
overlap between watch range and real access. But for quadword load/
store it's sometime set to the address of the first byte of real
access whereas sometime set to the address of the first byte of
overlap. This issue has been fixed in p10. In p10(ISA 3.1), DAR is
always set to the address of the first byte of overlap. Commit 27985b2a64
("powerpc/watchpoint: Don't ignore extraneous exceptions blindly")
wrongly assumes that DAR is set to the address of the first byte of
overlap for all load/stores on p8/p9 as well. Fix that. With the fix,
we now rely on 'ea' provided by analyse_instr(). If analyse_instr()
fails, generate event unconditionally on p8/p9, and on p10 generate
event only if DAR is within a DAWR range.
Note: 8xx is not affected.
Fixes: 27985b2a64 ("powerpc/watchpoint: Don't ignore extraneous exceptions blindly")
Fixes: 74c6881019 ("powerpc/watchpoint: Prepare handler to handle more than one watchpoint")
Reported-by: Pedro Miraglia Franco de Carvalho <pedromfc@br.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-3-ravi.bangoria@linux.ibm.com
Milton Miller reported that we are aligning start and end address to
wrong size SZ_512M. It should be SZ_512. Fix that.
While doing this change I also found a case where ALIGN() comparison
fails. Within a given aligned range, ALIGN() of two addresses does not
match when start address is pointing to the first byte and end address
is pointing to any other byte except the first one. But that's not true
for ALIGN_DOWN(). ALIGN_DOWN() of any two addresses within that range
will always point to the first byte. So use ALIGN_DOWN() instead of
ALIGN().
Fixes: e68ef121c1 ("powerpc/watchpoint: Use builtin ALIGN*() macros")
Reported-by: Milton Miller <miltonm@us.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-2-ravi.bangoria@linux.ibm.com
POWER6 only supports AMR update via privileged mode (MSR[PR] = 0,
SPRN_AMR=29) The PR=1 (userspace) alias for that SPR (SPRN_AMR=13) was
only supported from POWER7. Since we don't allow userspace modifying
of AMR value we should disable pkey support on P6 and before.
The hypervisor will still report pkey support via
"ibm,processor-storage-keys". Hence also check for P7 CPU_FTR bit to
decide on pkey support.
Fixes: f491fe3fb4 ("powerpc/book3s64/pkeys: Simplify the key initialization")
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200726132517.399076-1-aneesh.kumar@linux.ibm.com
The UDP reuseport conflict was a little bit tricky.
The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.
At the same time, the logic for reuseport handling of unconnected
sockets changed via commit efc6b6f6c3
which changed the logic to carry on the reuseport result into the
rest of the lookup loop if we do not return immediately.
This requires moving the reuseport_has_conns() logic into the callers.
While we are here, get rid of inline directives as they do not belong
in foo.c files.
The other changes were cases of more straightforward overlapping
modifications.
Signed-off-by: David S. Miller <davem@davemloft.net>
When I "fixed" the ppc64e build in Nick's recent patch, I typoed the
CONFIG symbol, resulting in one that doesn't exist. Fix it to use the
correct symbol.
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Fixes: 7fa95f9ada ("powerpc/64s: system call support for scv/rfscv instructions")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131609.1640533-1-mpe@ellerman.id.au
ppc64_book3e_allmodconfig fails with:
arch/powerpc/lib/test_emulate_step.c: In function 'test_pld':
arch/powerpc/lib/test_emulate_step.c:113:7: error: implicit declaration of function 'cpu_has_feature'
113 | if (!cpu_has_feature(CPU_FTR_ARCH_31)) {
| ^~~~~~~~~~~~~~~
Add an include of cpu_has_feature.h to fix it.
Fixes: b6b54b4272 ("powerpc/sstep: Add tests for prefixed integer load/stores")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724004109.1461709-1-mpe@ellerman.id.au
From Nick's cover letter:
Linux powerpc new system call instruction and ABI
System Call Vectored (scv) ABI
==============================
The scv instruction is introduced with POWER9 / ISA3, it comes with an
rfscv counter-part. The benefit of these instructions is
performance (trading slower SRR0/1 with faster LR/CTR registers, and
entering the kernel with MSR[EE] and MSR[RI] left enabled, which can
reduce MSR updates. The scv instruction has 128 levels (not enough to
cover the Linux system call space).
Assignment and advertisement
----------------------------
The proposal is to assign scv levels conservatively, and advertise
them with HWCAP feature bits as we add support for more.
Linux has not enabled FSCR[SCV] yet, so executing the scv instruction
will cause the kernel to log a "SCV facility unavilable" message, and
deliver a SIGILL with ILL_ILLOPC to the process. Linux has defined a
HWCAP2 bit PPC_FEATURE2_SCV for SCV support, but does not set it.
This change allocates the zero level ('scv 0'), advertised with
PPC_FEATURE2_SCV, which will be used to provide normal Linux system
calls (equivalent to 'sc').
Attempting to execute scv with other levels will cause a SIGILL to be
delivered the same as before, but will not log a "SCV facility
unavailable" message (because the processor facility is enabled).
Calling convention
------------------
The proposal is for scv 0 to provide the standard Linux system call
ABI with the following differences from sc convention[1]:
- LR is to be volatile across scv calls. This is necessary because the
scv instruction clobbers LR. From previous discussion, this should
be possible to deal with in GCC clobbers and CFI.
- cr1 and cr5-cr7 are volatile. This matches the C ABI and would allow
the kernel system call exit to avoid restoring the volatile cr
registers (although we probably still would anyway to avoid
information leaks).
- Error handling: The consensus among kernel, glibc, and musl is to
move to using negative return values in r3 rather than CR0[SO]=1 to
indicate error, which matches most other architectures, and is
closer to a function call.
Notes
-----
- r0,r4-r8 are documented as volatile in the ABI, but the kernel patch
as submitted currently preserves them. This is to leave room for
deciding which way to go with these. Some small benefit was found by
preserving them[1] but I'm not convinced it's worth deviating from
the C function call ABI just for this. Release code should follow
the ABI.
Previous discussions:
https://lists.ozlabs.org/pipermail/linuxppc-dev/2020-April/208691.htmlhttps://lists.ozlabs.org/pipermail/linuxppc-dev/2020-April/209268.html
[1] https://github.com/torvalds/linux/blob/master/Documentation/powerpc/syscall64-abi.rst
[2] https://lists.ozlabs.org/pipermail/linuxppc-dev/2020-April/209263.html
POWER9 onwards the support for the registers HID1, HID4, HID5 has been
receded.
Although mfspr on the above registers worked in Power9, In Power10
simulator is unrecognized. Moving their assignment under the
check for machines lower than Power9
Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200721153708.89057-4-psampat@linux.ibm.com
Replace the variable name from using "pnv_first_spr_loss_level" to
"deep_spr_loss_state".
pnv_first_spr_loss_level is supposed to be the earliest state that
has OPAL_PM_LOSE_FULL_CONTEXT set, in other places the kernel uses the
"deep" states as terminology. Hence renaming the variable to be coherent
to its semantics.
Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com>
Acked-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200721153708.89057-3-psampat@linux.ibm.com
The POWER9 idle driver contains implementation-specific details that
means it is not suitable to run on any processor that implements ISA
v3.0 (e.g., POWER10), so only init the driver when running on a
POWER9.
Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com>
[mpe: Use updated change log from Nick]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200721153708.89057-2-psampat@linux.ibm.com
hash_low_64.S was removed in commit a43c0eb836 ("powerpc/mm: Convert
4k insert from asm to C") and flush_hash_page() is no longer called
from any assembly routine.
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
[mpe: Tweak comment wording]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200721091915.205006-1-santosh@fossix.org
On PAPR+ the hcall() on 0x1B0 is called H_DISABLE_AND_GET, but got
defined as H_DISABLE_AND_GETC instead.
This define was introduced with a typo in commit <b13a96cfb055>
("[PATCH] powerpc: Extends HCALL interface for InfiniBand usage"), and was
later used without having the typo noticed.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200707004812.190765-1-leobras.c@gmail.com
Both the ->dump method and snprintf return an int. So switch to an
int and properly handle errors from ->dump.
Fixes: 5456ffdee6 ("powerpc/spufs: simplify spufs core dumping")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200610085554.5647-1-hch@lst.de
Several device drivers hit EEH(Extended Error handling) when
triggering kdump on Pseries PowerVM. This patch implemented a reset of
the PHBs in pci general code when triggering kdump. PHB reset stop all
PCI transactions from normal kernel. We have tested the patch in
several enviroments:
- direct slot adapters
- adapters under the switch
- a VF adapter in PowerVM
- a VF adapter/adapter in KVM guest.
Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
[mpe: Fix broken whitespace, subject & SOB formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594651173-32166-1-git-send-email-wenxiong@linux.vnet.ibm.com
powerpc return from interrupt and return from system call sequences
are context synchronising.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200716013522.338318-1-npiggin@gmail.com
This primitive has been renamed, but because it was spelled incorrectly in the
first place it must have escaped the fixup patch. As far as I can tell this
logic is still correct: smp_mb__after_spinlock() uses the default smp_mb()
implementation, which is "sync" rather than "hwsync" but those are the same
(though I'm not that familiar with PowerPC).
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200716193820.1141936-1-palmer@dabbelt.com
retrieve prefix instruction operands RA and pc relative bit R values
using macros and adopt it in sstep.c and test_emulate_step.c.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200626095158.1031507-4-bala24@linux.ibm.com
testcases for `paddi` instruction to cover the negative case,
if R is equal to 1 and RA is not equal to 0, the instruction
form is invalid.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200626095158.1031507-3-bala24@linux.ibm.com
add provision to declare test is a negative scenario, verify
whether emulation fails and avoid executing it.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200626095158.1031507-2-bala24@linux.ibm.com
Currently prefixed instructions are dumped as two separate word
instructions. Use mread_instr() so that prefixed instructions are read
as such and update the incrementor in the loop to take this into
account.
'dump_func' is print_insn_powerpc() which comes from ppc-dis.c which is
taken from binutils. When this is updated prefixed instructions will be
disassembled.
Currently dumping prefixed instructions looks like this:
0:mon> di c000000000094168
c000000000094168 0x06000000 .long 0x6000000
c00000000009416c 0x392a0003 addi r9,r10,3
c000000000094170 0x913f0028 stw r9,40(r31)
c000000000094174 0xe93f002a lwa r9,40(r31)
c000000000094178 0x7d234b78 mr r3,r9
c00000000009417c 0x383f0040 addi r1,r31,64
c000000000094180 0xebe1fff8 ld r31,-8(r1)
c000000000094184 0x4e800020 blr
c000000000094188 0x60000000 nop
...
c000000000094190 0x3c4c0121 addis r2,r12,289
c000000000094194 0x38429670 addi r2,r2,-27024
c000000000094198 0x7c0802a6 mflr r0
c00000000009419c 0x60000000 nop
c0000000000941a0 0xe9240100 ld r9,256(r4)
c0000000000941a4 0x39400001 li r10,1
After this it looks like:
0:mon> di c000000000094168
c000000000094168 0x06000000 0x392a0003 .long 0x392a000306000000
c000000000094170 0x913f0028 stw r9,40(r31)
c000000000094174 0xe93f002a lwa r9,40(r31)
c000000000094178 0x7d234b78 mr r3,r9
c00000000009417c 0x383f0040 addi r1,r31,64
c000000000094180 0xebe1fff8 ld r31,-8(r1)
c000000000094184 0x4e800020 blr
c000000000094188 0x60000000 nop
...
c000000000094190 0x3c4c0121 addis r2,r12,289
c000000000094194 0x38429570 addi r2,r2,-27280
c000000000094198 0x7c0802a6 mflr r0
c00000000009419c 0x60000000 nop
c0000000000941a0 0xe9240100 ld r9,256(r4)
c0000000000941a4 0x39400001 li r10,1
c0000000000941a8 0x3d02000b addis r8,r2,11
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200602052728.18227-2-jniethe5@gmail.com
There are quite a few places where instructions are printed, this is
done using a '%x' format specifier. With the introduction of prefixed
instructions, this does not work well. Currently in these places,
ppc_inst_val() is used for the value for %x so only the first word of
prefixed instructions are printed.
When the instructions are word instructions, only a single word should
be printed. For prefixed instructions both the prefix and suffix should
be printed. To accommodate both of these situations, instead of a '%x'
specifier use '%s' and introduce a helper, __ppc_inst_as_str() which
returns a char *. The char * __ppc_inst_as_str() returns is buffer that
is passed to it by the caller.
It is cumbersome to require every caller of __ppc_inst_as_str() to now
declare a buffer. To make it more convenient to use __ppc_inst_as_str(),
wrap it in a macro that uses a compound statement to allocate a buffer
on the caller's stack before calling it.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
[mpe: Drop 0x prefix to match most existings uses, especially xmon]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200602052728.18227-1-jniethe5@gmail.com
Use the existing support for testing compute type instructions to test
Prefixed Add Immediate (paddi). The R bit of the paddi instruction
controls whether current instruction address is used. Add test cases
for when R=1 and for R=0. paddi has a 34 bit immediate field formed by
concatenating si0 and si1. Add tests for the extreme values of this
field.
Skip the paddi tests if ISA v3.1 is unsupported.
Some of these test cases were added by Balamuruhan S.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Fix conflicts with ppc-opcode.h changes, squash in .balign]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525025923.19843-5-jniethe5@gmail.com
An a array of struct compute_test's are used to declare tests for
compute instructions. Add a cpu_feature field to struct compute_test as
an optional way to specify a cpu feature that must be present. If not
present then skip the test.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525025923.19843-4-jniethe5@gmail.com
The tests for emulation of compute instructions execute and
emulate an instruction and then compare the results to verify the
emulation. In ISA v3.1 there are instructions that operate relative to
the NIP. Therefore set the NIP in the regs used for the emulated
instruction to the location of the executed instruction so they will
give the same result.
This is a rework of a patch by Balamuruhan S.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525025923.19843-3-jniethe5@gmail.com
Add tests for the prefixed versions of the floating-point load/stores
that are currently tested. This includes the following instructions:
* Prefixed Load Floating-Point Single (plfs)
* Prefixed Load Floating-Point Double (plfd)
* Prefixed Store Floating-Point Single (pstfs)
* Prefixed Store Floating-Point Double (pstfd)
Skip the new tests if ISA v3.10 is unsupported.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Fix conflicts with ppc-opcode.h changes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525025923.19843-2-jniethe5@gmail.com
Add tests for the prefixed versions of the integer load/stores that
are currently tested. This includes the following instructions:
* Prefixed Load Doubleword (pld)
* Prefixed Load Word and Zero (plwz)
* Prefixed Store Doubleword (pstd)
Skip the new tests if ISA v3.1 is unsupported.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Fix conflicts with ppc-opcode.h changes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525025923.19843-1-jniethe5@gmail.com
In the current kvm version, 'kvm_run' has been included in the 'kvm_vcpu'
structure. For historical reasons, many kvm-related function parameters
retain the 'kvm_run' and 'kvm_vcpu' parameters at the same time. This
patch does a unified cleanup of these remaining redundant parameters.
[paulus@ozlabs.org - Fixed places that were missed in book3s_interrupts.S]
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Add support for the scv instruction on POWER9 and later CPUs.
For now this implements the zeroth scv vector 'scv 0', as identical to
'sc' system calls, with the exception that LR is not preserved, nor
are volatile CR registers, and error is not indicated with CR0[SO],
but by returning a negative errno.
rfscv is implemented to return from scv type system calls. It can not
be used to return from sc system calls because those are defined to
preserve LR.
getpid syscall throughput on POWER9 is improved by 26% (428 to 318
cycles), largely due to reducing mtmsr and mtspr.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fix ppc64e build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200611081203.995112-3-npiggin@gmail.com
The scv instruction causes an interrupt which can enter the kernel with
MSR[EE]=1, thus allowing interrupts to hit at any time. These must not
be taken as normal interrupts, because they come from MSR[PR]=0 context,
and yet the kernel stack is not yet set up and r13 is not set to the
PACA).
Treat this as a soft-masked interrupt regardless of the soft masked
state. This does not affect behaviour yet, because currently all
interrupts are taken with MSR[EE]=0.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200611081203.995112-2-npiggin@gmail.com
PowerISA v3.1 has few updates for the Branch History Rolling
Buffer(BHRB).
BHRB disable is controlled via Monitor Mode Control Register A (MMCRA)
bit, namely "BHRB Recording Disable (BHRBRD)". This field controls
whether BHRB entries are written when BHRB recording is enabled by
other bits. This patch implements support for this BHRB disable bit.
By setting 0b1 to this bit will disable the BHRB and by setting 0b0 to
this bit will have BHRB enabled. This addresses backward
compatibility (for older OS), since this bit will be cleared and
hardware will be writing to BHRB by default.
This patch addresses changes to set MMCRA (BHRBRD) at boot for
power10 (there by the core will run faster) and enable this feature
only on runtime ie, on explicit need from user. Also save/restore
MMCRA in the restore path of state-loss idle state to make sure we
keep BHRB disabled if it was not enabled on request at runtime.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-12-git-send-email-atrajeev@linux.vnet.ibm.com
PowerISA v3.1 introduce filtering support for
PERF_SAMPLE_BRANCH_IND_CALL/COND. The patch adds BHRB filter
support for "ind_call" and "cond" in power10_bhrb_filter_map().
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-11-git-send-email-atrajeev@linux.vnet.ibm.com
Commit bb19af8160 ("powerpc/perf: Prevent kernel address leak to
userspace via BHRB buffer") added a check in bhrb_read() to filter
the kernel address from BHRB buffer. This patch modified it to avoid
that check for PowerISA v3.1 based processors, since PowerISA v3.1
allows only MSR[PR]=1 address to be written to BHRB buffer.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-10-git-send-email-atrajeev@linux.vnet.ibm.com
Base enablement patch to register performance monitoring hardware
support for power10. Patch introduce the raw event encoding format,
defines the supported list of events, config fields for the event
attributes and their corresponding bit values which are exported via
sysfs.
Patch also enhances the support function in isa207_common.c to include
power10 pmu hardware.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-9-git-send-email-atrajeev@linux.vnet.ibm.com
Add Power10 feature function to DT CPU features, along with a Power10
specific init() to initialize PMU SPRs, sets the oprofile_cpu_type and
cpu_features. This will enable performance monitoring unit (PMU) for
Power10 in CPU features with "performance-monitor-power10".
For Power ISA v3.1, BHRB disable is controlled via Monitor Mode
Control Register A (MMCRA) bit, namely "BHRB Recording
Disable (BHRBRD)". This patch initializes MMCRA BHRBRD to disable BHRB
feature at boot for Power10.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Move MMCRA_BHRB_DISABLE as noted by jpn, drop CPU setup changes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-8-git-send-email-atrajeev@linux.vnet.ibm.com
PowerISA v3.1 added three new perfromance
monitoring unit (PMU) speical purpose register (SPR).
They are Monitor Mode Control Register 3 (MMCR3),
Sampled Instruction Event Register 2 (SIER2),
Sampled Instruction Event Register 3 (SIER3).
Patch here adds a new dump function dump_310_sprs
to print these SPR values.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-7-git-send-email-atrajeev@linux.vnet.ibm.com
Power ISA v3.1 has added new performance monitoring unit (PMU) special
purpose registers (SPRs). They are:
Monitor Mode Control Register 3 (MMCR3)
Sampled Instruction Event Register A (SIER2)
Sampled Instruction Event Register B (SIER3)
Add support to save/restore these new SPRs while entering/exiting
guest. Also include changes to support KVM_REG_PPC_MMCR3/SIER2/SIER3.
Add new SPRs to KVM API documentation.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-6-git-send-email-atrajeev@linux.vnet.ibm.com
PowerISA v3.1 includes new performance monitoring unit(PMU)
special purpose registers (SPRs). They are
Monitor Mode Control Register 3 (MMCR3)
Sampled Instruction Event Register 2 (SIER2)
Sampled Instruction Event Register 3 (SIER3)
MMCR3 is added for further sampling related configuration
control. SIER2/SIER3 are added to provide additional
information about the sampled instruction.
Patch adds new PPMU flag called "PPMU_ARCH_31" to support handling of
these new SPRs, updates the struct thread_struct to include these new
SPRs, include MMCR3 in struct mmcr_regs. This is needed to support
programming of MMCR3 SPR during event_enable/disable. Patch also adds
the sysfs support for the MMCR3 SPR along with SPRN_ macros for these
new pmu SPRs.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Rename to PPMU_ARCH_31 as noted by jpn]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-5-git-send-email-atrajeev@linux.vnet.ibm.com
Events of type PERF_TYPE_HW_CACHE was described for Power PMU
as: int (*cache_events)[type][op][result];
where type, op, result values unpacked from the event attribute config
value is used to generate the raw event code at runtime.
So far the event code values which used to create these cache-related
events were within 32 bit and `int` type worked. In power10,
some of the event codes are of 64-bit value and hence update the
Power PMU cache_events to `u64` type in `power_pmu` struct.
Also propagate this change to existing all PMU driver code paths
which are using ppmu->cache_events.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-4-git-send-email-atrajeev@linux.vnet.ibm.com
Currently `kvm_vcpu_arch` stores all Monitor Mode Control registers
in a flat array in order: mmcr0, mmcr1, mmcra, mmcr2, mmcrs
Split this to give mmcra and mmcrs its own entries in vcpu and
use a flat array for mmcr0 to mmcr2. This patch implements this
cleanup to make code easier to read.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Fix MMCRA/MMCR2 uapi breakage as noted by paulus]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-3-git-send-email-atrajeev@linux.vnet.ibm.com
PowerPC always re-builds DTB even if nothing has been changed.
As for other architectures, arch/*/boot/dts/Makefile builds DTB by
using the dtb-y syntax.
In contrast, arch/powerpc/boot/dts/(fsl/)Makefile does nothing unless
CONFIG_OF_ALL_DTBS is defined. Instead, arch/powerpc/boot/Makefile
builds DTB on demand. You need to add DTB to 'targets' explicitly
so .*.cmd files are included.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
core-book3s currently uses array to store the MMCR registers as part
of per-cpu `cpu_hw_events`. This patch does a clean up to use `struct`
to store mmcr regs instead of array. This will make code easier to read
and reduces chance of any subtle bug that may come in the future, say
when new registers are added. Patch updates all relevant code that was
using MMCR array ( cpuhw->mmcr[x]) to use newly introduced `struct`.
This includes the PMU driver code for supported platforms (power5
to power9) and ISA macros for counter support functions.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-2-git-send-email-atrajeev@linux.vnet.ibm.com
Compilation error:
arch/powerpc/perf/perf_regs.c:80:undefined reference to `.is_sier_available'
Currently is_sier_available() is part of core-book3s.c, which is added
to build based on CONFIG_PPC_PERF_CTRS.
A config with CONFIG_PERF_EVENTS and without CONFIG_PPC_PERF_CTRS will
have a build break because of missing is_sier_available().
In practice it only breaks when CONFIG_FSL_EMB_PERF_EVENT=n because
that also guards the usage of is_sier_available(). That only happens
with CONFIG_PPC_BOOK3E_64=y and CONFIG_FSL_SOC_BOOKE=n.
Patch adds is_sier_available() in asm/perf_event.h to fix the build
break for configs missing CONFIG_PPC_PERF_CTRS.
Fixes: 333804dc3b ("powerpc/perf: Update perf_regs structure to include SIER")
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Add detail about CONFIG_FSL_SOC_BOOKE]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200614083604.302611-1-maddy@linux.ibm.com
The subpage_prot syscall was added for specialised system software
(Lx86) that has been discontinued for about 7 years, and is not thought
to be used elsewhere, so disable it by default.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703011958.1166620-4-npiggin@gmail.com
ISA v3.1 does not support the SAO storage control attribute required to
implement PROT_SAO. PROT_SAO was used by specialised system software
(Lx86) that has been discontinued for about 7 years, and is not thought
to be used elsewhere, so removal should not cause problems.
We rather remove it than keep support for older processors, because
live migrating guest partitions to newer processors may not be possible
if SAO is in use (or worse allowed with silent races).
- PROT_SAO stays in the uapi header so code using it would still build.
- arch_validate_prot() is removed, the generic version rejects PROT_SAO
so applications would get a failure at mmap() time.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Drop KVM change for the time being]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703011958.1166620-3-npiggin@gmail.com
This comment is wrong, we wouldn't use calc_vm_prot_bits() here
because we are being called by calc_vm_prot_bits() to modify its
behaviour.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703011958.1166620-2-npiggin@gmail.com
Both of those functions are only called from 64-bit only code, so the
stubs should not be needed at all.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200717112714.19304-1-yuehaibing@huawei.com
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200718103958.5455-1-grandmaster@al2klimov.de
Currently the spu coredump code triggers an RCU warning:
=============================
WARNING: suspicious RCU usage
5.7.0-rc3-01755-g7cd49f0b7ec7 #1 Not tainted
-----------------------------
include/linux/fdtable.h:95 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by spu-coredump/1343:
#0: c0000007fa22f430 (sb_writers#2){.+.+}-{0:0}, at: .do_coredump+0x1010/0x13c8
stack backtrace:
CPU: 0 PID: 1343 Comm: spu-coredump Not tainted 5.7.0-rc3-01755-g7cd49f0b7ec7 #1
Call Trace:
.dump_stack+0xec/0x15c (unreliable)
.lockdep_rcu_suspicious+0x120/0x144
.coredump_next_context+0x148/0x158
.spufs_coredump_extra_notes_size+0x54/0x190
.elf_coredump_extra_notes_size+0x34/0x50
.elf_core_dump+0xe48/0x19d0
.do_coredump+0xe50/0x13c8
.get_signal+0x864/0xd88
.do_notify_resume+0x158/0x3c8
.interrupt_exit_user_prepare+0x19c/0x208
interrupt_return+0x14/0x1c0
This comes from fcheck_files() via fcheck().
It's pretty clearly documented that fcheck() must be wrapped with
rcu_read_lock(), adding that fixes the RCU warning.
hch points out that once we've released the RCU read lock the file may
be closed and freed, which would leave us with a pointer to a freed
spu_context.
To avoid that, take a reference to the spu_context while we hold the
RCU read lock, and drop that reference later once we're done with the
context.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200508130633.2532759-1-mpe@ellerman.id.au
There is only one caller to this function and the function is wrongly
named. Avoid further confusion w.r.t name and open code this at the
only call site. Also remove read_uamor(). There are no users for
the same after this.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-24-aneesh.kumar@linux.ibm.com
The kvm_vcpu_read_guest/kvm_vcpu_write_guest used for nested guests
eventually call srcu_dereference_check to dereference a memslot and
lockdep produces a warning as neither kvm->slots_lock nor
kvm->srcu lock is held and kvm->users_count is above zero (>100 in fact).
This wraps mentioned VCPU read/write helpers in srcu read lock/unlock as
it is done in other places. This uses vcpu->srcu_idx when possible.
These helpers are only used for nested KVM so this may explain why
we did not see these before.
Here is an example of a warning:
=============================
WARNING: suspicious RCU usage
5.7.0-rc3-le_dma-bypass.3.2_a+fstn1 #897 Not tainted
-----------------------------
include/linux/kvm_host.h:633 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by qemu-system-ppc/2752:
#0: c000200359016be0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x144/0xd80 [kvm]
stack backtrace:
CPU: 80 PID: 2752 Comm: qemu-system-ppc Not tainted 5.7.0-rc3-le_dma-bypass.3.2_a+fstn1 #897
Call Trace:
[c0002003591ab240] [c000000000b23ab4] dump_stack+0x190/0x25c (unreliable)
[c0002003591ab2b0] [c00000000023f954] lockdep_rcu_suspicious+0x140/0x164
[c0002003591ab330] [c008000004a445f8] kvm_vcpu_gfn_to_memslot+0x4c0/0x510 [kvm]
[c0002003591ab3a0] [c008000004a44c18] kvm_vcpu_read_guest+0xa0/0x180 [kvm]
[c0002003591ab410] [c008000004ff9bd8] kvmhv_enter_nested_guest+0x90/0xb80 [kvm_hv]
[c0002003591ab980] [c008000004fe07bc] kvmppc_pseries_do_hcall+0x7b4/0x1c30 [kvm_hv]
[c0002003591aba10] [c008000004fe5d30] kvmppc_vcpu_run_hv+0x10a8/0x1a30 [kvm_hv]
[c0002003591abae0] [c008000004a5d954] kvmppc_vcpu_run+0x4c/0x70 [kvm]
[c0002003591abb10] [c008000004a56e54] kvm_arch_vcpu_ioctl_run+0x56c/0x7c0 [kvm]
[c0002003591abba0] [c008000004a3ddc4] kvm_vcpu_ioctl+0x4ac/0xd80 [kvm]
[c0002003591abd20] [c0000000006ebb58] ksys_ioctl+0x188/0x210
[c0002003591abd70] [c0000000006ebc28] sys_ioctl+0x48/0xb0
[c0002003591abdb0] [c000000000042764] system_call_exception+0x1d4/0x2e0
[c0002003591abe20] [c00000000000cce8] system_call_common+0xe8/0x214
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
POWER8 and POWER9 have 12-bit LPIDs. Change LPID_RSVD to support up to
(4096 - 2) guests on these processors. POWER7 is kept the same with a
limitation of (1024 - 2), but it might be time to drop KVM support for
POWER7.
Tested with 2048 guests * 4 vCPUs on a witherspoon system with 512G
RAM and a bit of swap.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Adds support for emulating ISAv3.1 guests by adding the appropriate PCR
and FSCR bits.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
UAMOR values are not application-specific. The kernel initializes
its value based on different reserved keys. Remove the thread-specific
UAMOR value and don't switch the UAMOR on context switch.
Move UAMOR initialization to key initialization code and remove
thread_struct.uamor because it is not used anymore.
Before commit: 4a4a5e5d2a ("powerpc/pkeys: key allocation/deallocation must not change pkey registers")
we used to update uamor based on key allocation and free.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-20-aneesh.kumar@linux.ibm.com
As we kexec across kernels that use AMR/IAMR for different purposes
we need to ensure that new kernels get kexec'd with a reset value
of AMR/IAMR. For ex: the new kernel can use key 0 for kernel mapping and the old
AMR value prevents access to key 0.
This patch also removes reset if IAMR and AMOR in kexec_sequence. Reset of AMOR
is not needed and the IAMR reset is partial (it doesn't do the reset
on secondary cpus) and is redundant with this patch.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-19-aneesh.kumar@linux.ibm.com
Parse storage keys related device tree entry in early_init_devtree
and enable MMU feature MMU_FTR_PKEY if pkeys are supported.
MMU feature is used instead of CPU feature because this enables us
to group MMU_FTR_KUAP and MMU_FTR_PKEY in asm feature fixup code.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-14-aneesh.kumar@linux.ibm.com
The hypervisor can return less than max allowed pkey (for ex: 31) instead
of 32. We should mark all the pkeys above max allowed as reserved so
that we avoid the allocation of the wrong pkey(for ex: key 31 in the above
case) by userspace.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-13-aneesh.kumar@linux.ibm.com
initial_allocation_mask is not used outside this file.
Also mark reserved_allocation_mask and initial_allocation_mask __ro_after_init;
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-12-aneesh.kumar@linux.ibm.com
Make the default value FALSE (pkey enabled) and set to TRUE when we
find the total number of keys supported to be zero.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-10-aneesh.kumar@linux.ibm.com
Add documentation explaining the execute_only_key. The reservation and initialization mask
details are also explained in this patch.
No functional change in this patch.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-7-aneesh.kumar@linux.ibm.com
This number the pkey bit such that it is easy to follow. PKEY_BIT0 is
the lower order bit. This makes further changes easy to follow.
No functional change in this patch other than linux page table for
hash translation now maps pkeys differently.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-3-aneesh.kumar@linux.ibm.com
We are wrongly using CPU_FTRS_POWER8 to check for P8 support. Instead, we should
use PVR value. Now considering we are using CPU_FTRS_POWER8, that
implies we returned true for P9 with older firmware. Keep the same behavior
by checking for P9 PVR value.
Fixes: cf43d3b264 ("powerpc: Enable pkey subsystem")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-2-aneesh.kumar@linux.ibm.com
Subscribe to the MCE notification and add the physical address which
generated a memory error to nvdimm bad range.
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709135142.721504-2-santosh@fossix.org
Introduce notification chain which lets us know about uncorrected memory
errors(UE). This would help prospective users in pmem or nvdimm subsystem
to track bad blocks for better handling of persistent memory allocations.
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709135142.721504-1-santosh@fossix.org
To enable memory unplug without splitting kernel page table
mapping, we force the max mapping size to the LMB size. LMB
size is the unit in which hypervisor will do memory add/remove
operation.
Pseries systems supports max LMB size of 256MB. Hence on pseries,
we now end up mapping memory with 2M page size instead of 1G. To improve
that we want hypervisor to hint the kernel about the hotplug
memory range. That was added that as part of
commit b6eca183e2 ("powerpc/kernel: Enables memory
hot-remove after reboot on pseries guests")
But PowerVM doesn't provide that hint yet. Once we get PowerVM
updated, we can then force the 2M mapping only to hot-pluggable
memory region using memblock_is_hotpluggable(). Till then
let's depend on LMB size for finding the mapping page size
for linear range.
With this change KVM guest will also be doing linear mapping with
2M page size.
The actual TLB benefit of mapping guest page table entries with
hugepage size can only be materialized if the partition scoped
entries are also using the same or higher page size. A guest using
1G hugetlbfs backing guest memory can have a performance impact with
the above change.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Fold in fix from Aneesh spotted by lkp@intel.com]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709131925.922266-5-aneesh.kumar@linux.ibm.com
We split the page table mapping on memory unplug if the
linear range was mapped with huge page mapping (for ex: 1G)
The page table splitting code has a few issues:
1. Recursive locking
--------------------
Memory unplug path takes cpu_hotplug_lock and calls stop_machine()
for splitting the mappings. However stop_machine() takes
cpu_hotplug_lock again causing deadlock.
2. BUG: sleeping function called from in_atomic() context
---------------------------------------------------------
Memory unplug path (remove_pagetable) takes init_mm.page_table_lock
spinlock and later calls stop_machine() which does wait_for_completion()
3. Bad unlock unbalance
-----------------------
Memory unplug path takes init_mm.page_table_lock spinlock and calls
stop_machine(). The stop_machine thread function runs in a different
thread context (migration thread) which tries to release and reaquire
ptl. Releasing ptl from a different thread than which acquired it
causes bad unlock unbalance.
These problems can be avoided if we avoid mapping hot-plugged memory
with 1G mapping, thereby removing the need for splitting them during
unplug. The kernel always make sure the minimum unplug request is
SUBSECTION_SIZE for device memory and SECTION_SIZE for regular memory.
In preparation for such a change remove page table splitting support.
This essentially is a revert of
commit 4dd5f8a99e ("powerpc/mm/radix: Split linear mapping on hot-unplug")
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709131925.922266-4-aneesh.kumar@linux.ibm.com
We can hit the following BUG_ON during memory unplug:
kernel BUG at arch/powerpc/mm/book3s64/pgtable.c:342!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
NIP [c000000000093308] pmd_fragment_free+0x48/0xc0
LR [c00000000147bfec] remove_pagetable+0x578/0x60c
Call Trace:
0xc000008050000000 (unreliable)
remove_pagetable+0x384/0x60c
radix__remove_section_mapping+0x18/0x2c
remove_section_mapping+0x1c/0x3c
arch_remove_memory+0x11c/0x180
try_remove_memory+0x120/0x1b0
__remove_memory+0x20/0x40
dlpar_remove_lmb+0xc0/0x114
dlpar_memory+0x8b0/0xb20
handle_dlpar_errorlog+0xc0/0x190
pseries_hp_work_fn+0x2c/0x60
process_one_work+0x30c/0x810
worker_thread+0x98/0x540
kthread+0x1c4/0x1d0
ret_from_kernel_thread+0x5c/0x74
This occurs when unplug is attempted for such memory which has
been mapped using memblock pages as part of early kernel page
table setup. We wouldn't have initialized the PMD or PTE fragment
count for those PMD or PTE pages.
This can be fixed by allocating memory in PAGE_SIZE granularity
during early page table allocation. This makes sure a specific
page is not shared for another memblock allocation and we can
free them correctly on removing page-table pages.
Since we now do PAGE_SIZE allocations for both PUD table and
PMD table (Note that PTE table allocation is already of PAGE_SIZE),
we end up allocating more memory for the same amount of system RAM.
Here is a comparision of how much more we need for a 64T and 2G
system after this patch:
1. 64T system
-------------
64T RAM would need 64G for vmemmap with struct page size being 64B.
128 PUD tables for 64T memory (1G mappings)
1 PUD table and 64 PMD tables for 64G vmemmap (2M mappings)
With default PUD[PMD]_TABLE_SIZE(4K), (128+1+64)*4K=772K
With PAGE_SIZE(64K) table allocations, (128+1+64)*64K=12352K
2. 2G system
------------
2G RAM would need 2M for vmemmap with struct page size being 64B.
1 PUD table for 2G memory (1G mapping)
1 PUD table and 1 PMD table for 2M vmemmap (2M mappings)
With default PUD[PMD]_TABLE_SIZE(4K), (1+1+1)*4K=12K
With new PAGE_SIZE(64K) table allocations, (1+1+1)*64K=192K
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709131925.922266-2-aneesh.kumar@linux.ibm.com
When '029ab30b4c0a ("powerpc/mm: Enable radix GTSE only if supported.")'
made GTSE an MMU feature, it was enabled by default in
powerpc-cpu-features but was missed in pa-features. This causes random
memory corruption during boot of PowerNV kernels where
CONFIG_PPC_DT_CPU_FTRS isn't enabled.
Fixes: 029ab30b4c ("powerpc/mm: Enable radix GTSE only if supported.")
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
[mpe: Unwrap long line]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200720044258.863574-1-bharata@linux.ibm.com
Now that the ->compat_{get,set}sockopt proto_ops methods are gone
there is no good reason left to keep the compat syscalls separate.
This fixes the odd use of unsigned int for the compat_setsockopt
optlen and the missing sock_use_custom_sol_socket.
It would also easily allow running the eBPF hooks for the compat
syscalls, but such a large change in behavior does not belong into
a consolidation patch like this one.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the DMA API bypass mechanism for direct window mappings. This uses
common code and speed up the direct mapping case by avoiding indirect
calls just when not using dma ops at all. It also fixes a problem where
the sync_* methods were using the bypass check for DMA allocations, but
those are part of the streaming ops.
Note that this patch loses the DMA_ATTR_WEAK_ORDERING override, which
has never been well defined, as is only used by a few drivers, which
IIRC never showed up in the typical Cell blade setups that are affected
by the ordering workaround.
Fixes: efd176a04b ("powerpc/pseries/dma: Allow SWIOTLB")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Avoid the overhead of the dma ops support for tiny builds that only
use the direct mapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
The device-tree properties to check secure and trusted boot state are
different for guests (pseries) compared to baremetal (powernv).
This patch updates the existing is_ppc_secureboot_enabled() and
is_ppc_trustedboot_enabled() functions to add support for pseries.
For pseries the secureboot and trustedboot state are exposed via
device-tree properties /ibm,secure-boot and /ibm,trusted-boot.
The values of ibm,secure-boot under pseries are interpreted as:
0 - Disabled
1 - Enabled in Log-only mode. This patch interprets this value as
disabled, since audit mode is currently not supported for
Linux.
2 - Enabled and enforced.
3-9 - Enabled and enforcing; requirements are at the discretion of
the operating system.
The values of ibm,trusted-boot under pseries are interpreted as:
0 - Disabled
1 - Enabled
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
[mpe: Drop machdep.h inclusion, tweak change log slightly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594813921-12425-1-git-send-email-nayna@linux.ibm.com
The code in vdso_cpu_init that exposes the cpu and numa node to
userspace via SPRG_VDSO incorrctly masks the cpu to 12 bits. This means
that any kernel running on a box with more than 4096 threads (NR_CPUS
advertises a limit of of 8192 cpus) would expose userspace to two cpu
contexts running at the same time with the same cpu number.
Note: I'm not aware of any distro shipping a kernel with support for more
than 4096 threads today, nor of any system image that currently exceeds
4096 threads. Found via code browsing.
Fixes: 18ad51dd34 ("powerpc: Add VDSO version of getcpu")
Signed-off-by: Milton Miller <miltonm@us.ibm.com>
Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200715233704.1352257-1-anton@ozlabs.org
IMC trace-mode record has MSR[HV PR] bits added in the third DW.
These bits can be used to set the cpumode for the instruction pointer
captured in each sample.
Add support in kernel to use these bits to set the cpumode for
each sample.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200713144623.508695-1-maddy@linux.ibm.com
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200713192656.37443-1-grandmaster@al2klimov.de
Booting with a 4GB LMB size causes us to panic:
qemu-system-ppc64: OS terminated: OS panic:
Memory block size not suitable: 0x0
Fix pseries_memory_block_size() to handle 64 bit LMBs.
Cc: stable@vger.kernel.org
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200715000820.1255764-1-anton@ozlabs.org
When we enter into fadump crash path via system reset we fail to update
the pstore.
On the system reset path we first update the pstore then we go for fadump
crash. But the problem here is when all the CPUs try to get the pstore
lock to initiate the pstore write, only one CPUs will acquire the lock
and proceed with the pstore write. Since it in NMI context CPUs that fail
to get lock do not wait for their turn to write to the pstore and simply
proceed with the next operation which is fadump crash. One of the CPU who
proceeded with fadump crash path triggers the crash and does not wait for
the CPU who gets the pstore lock to complete the pstore update.
Timeline diagram to depicts the sequence of events that leads to an
unsuccessful pstore update when we hit fadump crash path via system reset.
1 2 3 ... n CPU Threads
| | | |
| | | |
Reached to -->|--->|---->| ----------->|
system reset | | | |
path | | | |
| | | |
Try to -->|--->|---->|------------>|
acquire the | | | |
pstore lock | | | |
| | | |
| | | |
Got the -->| +->| | |<-+
pstore lock | | | | | |--> Didn't get the
| --------------------------+ lock and moving
| | | | ahead on fadump
| | | | crash path
| | | |
Begins the -->| | | |
process to | | | |<-- Got the chance to
update the | | | | trigger the crash
pstore | -> | | ... <- |
| | | | | |
| | | | | |<-- Triggers the
| | | | | | crash
| | | | | | ^
| | | | | | |
Writing to -->| | | | | | |
pstore | | | | | | |
| | |
^ |__________________| |
| CPU Relax |
| |
+-----------------------------------------+
|
v
Race: crash triggered before pstore
update completes
To avoid this race condition a barrier is added on crash_fadump path, it
prevents the CPU to trigger the crash until all the online CPUs completes
their task.
A barrier is added to make sure all the secondary CPUs hit the
crash_fadump function before we initiates the crash. A timeout is kept to
ensure the primary CPU (one who initiates the crash) do not wait for
secondary CPUs indefinitely.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200713052435.183750-1-sourabhjain@linux.ibm.com
Generic code has a wrapper to implement cputime_to_nsecs() on top of
cputime_to_usecs() but we can easily return the full nanosecond
resolution directly.
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200713083601.1103978-1-anton@ozlabs.org
Lots of PPC_INST_* macros are used only ever in PPC_* macros, fold
those PPC_INST_* into PPC_RAW_* to avoid using PPC_INST_*
accidentally.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Deal with PHWSYNC, PLWSYNC]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200624113038.908074-7-bala24@linux.ibm.com
Wrap existing stringify macros to reuse raw instruction encoding
macros that are newly added.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Add DCBFPS, DCBSTPS, PHWSYNC, PLWSYNC]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200624113038.908074-6-bala24@linux.ibm.com
Move macro definitions of powerpc instructions from bpf_jit.h to
ppc-opcode.h and adopt the users of the macros accordingly. `PPC_MR()`
is defined twice in bpf_jit.h, remove the duplicate one.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200624113038.908074-5-bala24@linux.ibm.com
Remove duplicate macro definitions from bpf_jit.h and reuse the macros
from ppc-opcode.h
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200624113038.908074-4-bala24@linux.ibm.com
Few ppc instructions are encoded in test_emulate_step.c, consolidate
them and use it from ppc-opcode.h
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200624113038.908074-3-bala24@linux.ibm.com
Introduce PPC_RAW_* macros to have all the bare encoding of ppc
instructions. Move `VSX_XX*()` and `TMRN()` macros up to reuse it.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Add DCBFPS, DCBSTPS, PHWSYNC, PLWSYNC]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200624113038.908074-2-bala24@linux.ibm.com
Patch here adds a cpumask attr to hv_24x7 pmu along with ABI documentation.
Primary use to expose the cpumask is for the perf tool which has the
capability to parse the driver sysfs folder and understand the
cpumask file. Having cpumask file will reduce the number of perf command
line parameters (will avoid "-C" option in the perf tool
command line). It can also notify the user which is
the current cpu used to retrieve the counter data.
command:# cat /sys/devices/hv_24x7/interface/cpumask
0
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709051836.723765-3-kjain@linux.ibm.com
Patch here adds cpu hotplug functions to hv_24x7 pmu.
A new cpuhp_state "CPUHP_AP_PERF_POWERPC_HV_24x7_ONLINE" enum
is added.
The online callback function updates the cpumask only if its
empty. As the primary intention of adding hotplug support
is to designate a CPU to make HCALL to collect the
counter data.
The offline function test and clear corresponding cpu in a cpumask
and update cpumask to any other active cpu.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709051836.723765-2-kjain@linux.ibm.com
pseries_update_drconf_memory() runs from a DT notifier in response to
an update to the ibm,dynamic-memory property of the
/ibm,dynamic-reconfiguration-memory node. This property is an older
less compact format than the ibm,dynamic-memory-v2 property used in
most currently supported firmwares. There has never been an equivalent
function for the v2 property.
pseries_update_drconf_memory() compares the 'assigned' flag for each
LMB in the old vs new properties and adds or removes the block
accordingly. However it appears to be of no actual utility:
* Partition suspension and PRRNs are specified only to change LMBs'
NUMA affinity information. This notifier should be a no-op for those
scenarios since the assigned flags should not change.
* The memory hotplug/DLPAR path has a hack which short-circuits
execution of the notifier:
dlpar_memory()
...
rtas_hp_event = true;
drmem_update_dt()
of_update_property()
pseries_memory_notifier()
pseries_update_drconf_memory()
if (rtas_hp_event) return;
So this code only makes sense as a relic of the time when more of the
DLPAR workflow took place in user space. I don't see a purpose for it
now.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-19-nathanl@linux.ibm.com
dlpar_memory() no longer has any callers which pass
PSERIES_HP_ELOG_ACTION_READD. Remove this case and the corresponding
unreachable code.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-17-nathanl@linux.ibm.com
pseries_devicetree_update() is no longer called with PRRN_SCOPE. The
purpose of prrn_update_node() was to remove and then add back a LMB
whose NUMA assignment had changed. This has never been reliable, and
this codepath has been default-disabled for several releases. Remove
prrn_update_node().
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-16-nathanl@linux.ibm.com
Since arch_update_cpu_topology() doesn't do anything on powerpc now,
remove it and associated dead code.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-15-nathanl@linux.ibm.com
All users of this prrn_is_enabled() are gone; remove it.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-14-nathanl@linux.ibm.com
prrn_is_enabled() always returns false/0, so handle_rtas_event() can
be simplified and some dead code can be removed. Use machine_is()
instead of #ifdef to run this code only on pseries, and add an
informational ratelimited message that we are ignoring the
events. PRRN events are relatively rare in normal operation and
usually arise from operator-initiated actions such as a DPO (Dynamic
Platform Optimizer) run.
Eventually we do want to consume these events and update the device
tree, but that needs more care to be safe vs LPM and DLPAR.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-13-nathanl@linux.ibm.com
These APIs have become no-ops, so remove them and all call sites.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-12-nathanl@linux.ibm.com
timed_topology_update is a no-op now, so remove it and all call sites.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-11-nathanl@linux.ibm.com
Previous changes have removed the code which sets bits in
cpu_associativity_changes_mask and thus it is never modifed at
runtime. From this we can reason that numa_update_cpu_topology()
always returns 0 without doing anything. Remove the body of
numa_update_cpu_topology() and remove all code which becomes
unreachable as a result.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-10-nathanl@linux.ibm.com
These flags are always zero now; remove them and suitably adjust the
remaining references to them.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-9-nathanl@linux.ibm.com
Since vphn_enabled is always 0, we can remove the call to
topology_schedule_update() and remove the code which becomes
unreachable as a result.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-8-nathanl@linux.ibm.com
Since vphn_enabled is always 0, we can stub out
timed_topology_update() and remove the code which becomes unreachable.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-7-nathanl@linux.ibm.com
Previous changes have made it so these flags are never changed;
enforce this by making them const.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-6-nathanl@linux.ibm.com
Since the topology_updates_enabled flag is now always false, remove it
and the code which has become unreachable. This is the minimum change
that prevents 'defined but unused' warnings emitted by the compiler
after stubbing out the start/stop_topology_updates() functions.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-5-nathanl@linux.ibm.com
Remove the /proc/powerpc/topology_updates interface and the
topology_updates=on/off command line argument. The internal
topology_updates_enabled flag remains for now, but always false.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-4-nathanl@linux.ibm.com
Partition suspension, used for hibernation and migration, requires
that the OS place all but one of the LPAR's processor threads into one
of two states prior to calling the ibm,suspend-me RTAS function:
* the architected offline state (via RTAS stop-self); or
* the H_JOIN hcall, which does not return until the partition
resumes execution
Using H_CEDE as the offline mode, introduced by
commit 3aa565f53c ("powerpc/pseries: Add hooks to put the CPU into
an appropriate offline state"), means that any threads which are
offline from Linux's point of view must be moved to one of those two
states before a partition suspension can proceed.
This was eventually addressed in commit 120496ac2d ("powerpc: Bring
all threads online prior to migration/hibernation"), which added code
to temporarily bring up any offline processor threads so they can call
H_JOIN. Conceptually this is fine, but the implementation has had
multiple races with cpu hotplug operations initiated from user
space[1][2][3], the error handling is fragile, and it generates
user-visible cpu hotplug events which is a lot of noise for a platform
feature that's supposed to minimize disruption to workloads.
With commit 3aa565f53c ("powerpc/pseries: Add hooks to put the CPU
into an appropriate offline state") reverted, this code becomes
unnecessary, so remove it. Since any offline CPUs now are truly
offline from the platform's point of view, it is no longer necessary
to bring up CPUs only to have them call H_JOIN and then go offline
again upon resuming. Only active threads are required to call H_JOIN;
stopped threads can be left alone.
[1] commit a6717c01dd ("powerpc/rtas: use device model APIs and
serialization during LPM")
[2] commit 9fb603050f ("powerpc/rtas: retry when cpu offline races
with suspend/migration")
[3] commit dfd718a2ed ("powerpc/rtas: Fix a potential race between
CPU-Offline & Migration")
Fixes: 120496ac2d ("powerpc: Bring all threads online prior to migration/hibernation")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-3-nathanl@linux.ibm.com
This effectively reverts commit 3aa565f53c ("powerpc/pseries: Add
hooks to put the CPU into an appropriate offline state"), which added
an offline mode for CPUs which uses the H_CEDE hcall instead of the
architected stop-self RTAS function in order to facilitate "folding"
of dedicated mode processors on PowerVM platforms to achieve energy
savings. This has been the default offline mode since its
introduction.
There's nothing about stop-self that would prevent the hypervisor from
achieving the energy savings available via H_CEDE, so the original
premise of this change appears to be flawed.
I also have encountered the claim that the transition to and from
ceded state is much faster than stop-self/start-cpu. Certainly we
would not want to use stop-self as an *idle* mode. That is what H_CEDE
is for. However, this difference is insignificant in the context of
Linux CPU hotplug, where the latency of an offline or online operation
on current systems is on the order of 100ms, mainly attributable to
all the various subsystems' cpuhp callbacks.
The cede offline mode also prevents accurate accounting, as discussed
before:
https://lore.kernel.org/linuxppc-dev/1571740391-3251-1-git-send-email-ego@linux.vnet.ibm.com/
Unconditionally use stop-self to offline processor threads. This is
the architected method for offlining CPUs on PAPR systems.
The "cede_offline" boot parameter is rendered obsolete.
Removing this code enables the removal of the partition suspend code
which temporarily onlines all present CPUs.
Fixes: 3aa565f53c ("powerpc/pseries: Add hooks to put the CPU into an appropriate offline state")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-2-nathanl@linux.ibm.com
If both count cache and link stack are to be flushed, and can be flushed
with the special bcctr, patch that in directly to the flush/branch nop
site.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200609070610.846703-7-npiggin@gmail.com
Branch cache flushing code patching has inter-dependencies on both the
link stack and the count cache flushing state.
To make the code clearer and to separate the link stack and count
cache handling, split the "toggle" (setting up variables and printing
enable/disable) from the code patching.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Always print something, even if the flush is disabled]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200609070610.846703-5-npiggin@gmail.com
Prepare to allow for hardware link stack flushing by using the
none/sw/hw type, same as the count cache state.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200609070610.846703-3-npiggin@gmail.com
The count cache flush mostly refers to both count cache and link stack
flushing. As a first step to untangling these a bit, re-name the bits
that apply to both.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200609070610.846703-2-npiggin@gmail.com
When a FP/VEC/VSX unavailable fault loads registers and enables the
facility in the MSR, re-set the lazy restore counters to 1 rather
than incrementing them so every fault gets the same number of
restores before the next fault.
This probably shouldn't be a practical change because if a lazy counter
was non-zero then it should have been restored and would not cause a
fault when userspace tries to access it. However the code and comment
implies otherwise so that's misleading and unnecessary.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200623234139.2262227-3-npiggin@gmail.com
Before returning to user, if there are missing FP/VEC/VSX bits from the
user MSR then those registers had been saved and must be restored again
before use. restore_math will decide whether to restore immediately, or
skip the restore and let fp/vec/vsx unavailable faults demand load the
registers.
Each time restore_math restores one of the FP/VSX or VEC register sets
is loaded, an 8-bit counter is incremented (load_fp and load_vec). When
these wrap to zero, restore_math no longer restores that register set
until after they are next demand faulted.
It's quite usual for those counters to have different values, so if one
wraps to zero and restore_math no longer restores its registers or user
MSR bit but the other is not zero yet does not need to be restored
(because the kernel is not frequently using the FPU), then restore_math
will be called and it will also not return in the early exit check.
This causes msr_check_and_set to test and set the MSR at every kernel
exit despite having no work to do.
This can cause workloads (e.g., a NULL syscall microbenchmark) to run
fast for a time while both counters are non-zero, then slow down when
one of the counters reaches zero, then speed up again after the second
counter reaches zero. The cost is significant, about 10% slowdown on a
NULL syscall benchmark, and the jittery behaviour is very undesirable.
Fix this by having restore_math test all conditions first, and only
update MSR if we will be loading registers.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200623234139.2262227-2-npiggin@gmail.com
The TM test in restore_math added by commit dc16b553c9 ("powerpc:
Always restore FPU/VEC/VSX if hardware transactional memory in use") is
no longer necessary after commit a8318c13e7 ("powerpc/tm: Fix
restoring FP/VMX facility incorrectly on interrupts"), which removed
the cases where restore_math has to restore if TM is active.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200623234139.2262227-1-npiggin@gmail.com
With kernel now supporting new pmem flush/sync instructions, we can now
enable the kernel to initialize the device. On P10 these devices would
appear with a new compatible string. For PAPR device we have
compatible "ibm,pmemory-v2"
and for OF pmem device we have
compatible "pmem-region-v2"
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200701072235.223558-8-aneesh.kumar@linux.ibm.com
nvdimm expect the flush routines to just mark the cache clean. The barrier
that mark the store globally visible is done in nvdimm_flush().
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200701072235.223558-7-aneesh.kumar@linux.ibm.com
pmem on POWER10 can now use phwsync instead of hwsync to ensure
all previous writes are architecturally visible for the platform
buffer flush.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200701072235.223558-6-aneesh.kumar@linux.ibm.com
Start using dcbstps; phwsync; sequence for flushing persistent memory range.
The new instructions are implemented as a variant of dcbf and hwsync and on
P8 and P9 they will be executed as those instructions. We avoid using them on
older hardware. This helps to avoid difficult to debug bugs.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200701072235.223558-4-aneesh.kumar@linux.ibm.com
POWER10 introduces two new variants of dcbf instructions (dcbstps and dcbfps)
that can be used to write modified locations back to persistent storage.
Additionally, POWER10 also introduce phwsync and plwsync which can be used
to establish order of these writes to persistent storage.
This patch exposes these instructions to the rest of the kernel. The existing
dcbf and hwsync instructions in P8 and P9 are adequate to enable appropriate
synchronization with OpenCAPI-hosted persistent storage. Hence the new
instructions are added as a variant of the old ones that old hardware
won't differentiate.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200701072235.223558-3-aneesh.kumar@linux.ibm.com
The PAPR based virtualized persistent memory devices are only supported on
POWER9 and above. In the followup patch, the kernel will switch the persistent
memory cache flush functions to use a new `dcbf` variant instruction. The new
instructions even though added in ISA 3.1 works even on P8 and P9 because these
are implemented as a variant of existing `dcbf` and `hwsync` and on P8 and
P9 behaves as such.
Considering these devices are only supported on P8 and above, update the driver
to prevent a P7-compat guest from using persistent memory devices.
We don't update of_pmem driver with the same condition, because, on bare-metal,
the firmware enables pmem support only on P9 and above. There the kernel depends
on OPAL firmware to restrict exposing persistent memory related device tree
entries on older hardware. of_pmem.ko is written without any arch dependency and
we don't want to add ppc64 specific cpu feature check in of_pmem driver.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200701072235.223558-2-aneesh.kumar@linux.ibm.com
When platform doesn't support GTSE, let TLB invalidation requests
for radix guests be off-loaded to the host using H_RPT_INVALIDATE
hcall.
[hcall wrapper, error path handling and renames]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703053608.12884-4-bharata@linux.ibm.com
H_REGISTER_PROC_TBL asks for GTSE by default. GTSE flag bit should
be set only when GTSE is supported.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703053608.12884-3-bharata@linux.ibm.com
Make GTSE an MMU feature and enable it by default for radix.
However for guest, conditionally enable it if hypervisor supports
it via OV5 vector. Let prom_init ask for radix GTSE only if the
support exists.
Having GTSE as an MMU feature will make it easy to enable radix
without GTSE. Currently radix assumes GTSE is enabled by default.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703053608.12884-2-bharata@linux.ibm.com
P9 DD2 NX workbook (Table 4-36) says DMA controller uses CC=5
internally for translation fault handling. NX reserves CC=250 for
OS to notify user space when NX encounters address translation
failure on the request buffer. Not an issue in earlier releases
as NX does not get faults on kernel addresses.
This patch defines CSB_CC_FAULT_ADDRESS(250) and updates CSB.CC with
this proper error code for user space.
Fixes: c96c4436ab ("powerpc/vas: Update CSB and notify process for fault CRBs")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
[mpe: Added Fixes tag and fix typo in comment]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/019fd53e7538c6f8f332d175df74b1815ef5aa8c.camel@linux.ibm.com
save_general_regs() which does special handling when i == PT_SOFTE.
Rewrite it to minimise the specific part, especially the __put_user()
and associated error handling is the same so make it common.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Use a regular if rather than ternary operator]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/47a38df46cae5a5a88a558a64d71f75e9c4d9950.1594125164.git.christophe.leroy@csgroup.eu
Since commit ("1bd79336a426 powerpc: Fix various
syscall/signal/swapcontext bugs"), getting save_general_regs() called
without FULL_REGS() is very unlikely and generates a warning.
The 32-bit version of save_general_regs() doesn't take care of it
at all and copies all registers anyway since that commit.
Moreover, commit 965dd3ad30 ("powerpc/64/syscall: Remove
non-volatile GPR save optimisation") is another reason why it would
never happen.
So the same with 64-bit, don't worry about FULL_REGS() and copy
all registers all the time.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/173de3b659fa3a5f126a0eb170522cccd909950f.1594125164.git.christophe.leroy@csgroup.eu
Returning from an interrupt or syscall to a signal handler currently
begins execution directly at the handler's entry point, with LR set to
the address of the sigreturn trampoline. When the signal handler
function returns, it runs the trampoline. It looks like this:
# interrupt at user address xyz
# kernel stuff... signal is raised
rfid
# void handler(int sig)
addis 2,12,.TOC.-.LCF0@ha
addi 2,2,.TOC.-.LCF0@l
mflr 0
std 0,16(1)
stdu 1,-96(1)
# handler stuff
ld 0,16(1)
mtlr 0
blr
# __kernel_sigtramp_rt64
addi r1,r1,__SIGNAL_FRAMESIZE
li r0,__NR_rt_sigreturn
sc
# kernel executes rt_sigreturn
rfid
# back to user address xyz
Note the blr with no matching bl. This can corrupt the return
predictor.
Solve this by instead resuming execution at the signal trampoline
which then calls the signal handler. qtrace-tools link_stack checker
confirms the entire user/kernel/vdso cycle is balanced after this
patch, whereas it's not upstream.
Alan confirms the dwarf unwind info still looks good. gdb still
recognises the signal frame and can step into parent frames if it
break inside a signal handler.
Performance is pretty noisy, not a very significant change on a POWER9
here, but branch misses are consistently a lot lower on a
microbenchmark:
Performance counter stats for './signal':
13,085.72 msec task-clock # 1.000 CPUs utilized
45,024,760,101 cycles # 3.441 GHz
65,102,895,542 instructions # 1.45 insn per cycle
11,271,673,787 branches # 861.372 M/sec
59,468,979 branch-misses # 0.53% of all branches
12,989.09 msec task-clock # 1.000 CPUs utilized
44,692,719,559 cycles # 3.441 GHz
65,109,984,964 instructions # 1.46 insn per cycle
11,282,136,057 branches # 868.585 M/sec
39,786,942 branch-misses # 0.35% of all branches
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200511101952.1463138-1-npiggin@gmail.com
The kernel test robot pointed out a slightly different error message
after recent commit 5456ffdee6 ("powerpc/spufs: simplify spufs core
dumping") to spufs for a configuration that never worked:
powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_proxydma_info_dump':
>> file.c:(.text+0x4c68): undefined reference to `.dump_emit'
powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_dma_info_dump':
file.c:(.text+0x4d70): undefined reference to `.dump_emit'
powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_wbox_info_dump':
file.c:(.text+0x4df4): undefined reference to `.dump_emit'
Add a Kconfig dependency to prevent this from happening again.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200706132302.3885935-1-arnd@arndb.de
pnv_ioda_setup_bus_dma() is only used when a passed through PE is
returned to the host. If the kernel is built without IOMMU support
this is dead code. Move it under the #ifdef with the rest of the
IOMMU API support.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200705133557.443607-2-oohall@gmail.com
The kernel test robot noticed these are non-static which causes Clang to
print some warnings. These are called via ppc_md function pointers so
there's no need for them to be non-static.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200705133557.443607-1-oohall@gmail.com
Unlike drivers/base/cacheinfo, powerpc cacheinfo code is not exposing
shared_cpu_list under /sys/devices/system/cpu/cpu<n>/cache/index<m>
Add shared_cpu_list to per cpu per index directory to maintain parity
with x86. Some scripts (example: mmtests
https://github.com/gormanm/mmtests) seem to be looking for
shared_cpu_list instead of shared_cpu_map.
Before this patch:
# ls /sys/devices/system/cpu0/cache/index1
coherency_line_size number_of_sets size ways_of_associativity
level shared_cpu_map type
# cat /sys/devices/system/cpu0/cache/index1/shared_cpu_map
00ff
#
After this patch:
# ls /sys/devices/system/cpu0/cache/index1
coherency_line_size number_of_sets shared_cpu_map type
level shared_cpu_list size ways_of_associativity
# cat /sys/devices/system/cpu0/cache/index1/shared_cpu_map
00ff
# cat /sys/devices/system/cpu0/cache/index1/shared_cpu_list
0-7
#
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200629103703.4538-4-srikar@linux.vnet.ibm.com
In anticipation of implementing shared_cpu_list, move code under
shared_cpu_map_show() to a common function.
No functional changes.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200629103703.4538-3-srikar@linux.vnet.ibm.com
Tejun Heo had modified shared_cpu_map_show() to use scnprintf instead
of cpumap_print during support for *pb[l] format. Refer commit
0c118b7bd0 ("powerpc: use %*pb[l] to print bitmaps including
cpumasks and nodemasks").
cpumap_print_to_pagebuf() is a standard function to print cpumap. With
commit 9cf79d115f ("bitmap: remove explicit newline handling using
scnprintf format string"), there is no need to print explicit newline
and trailing null character. cpumap_print_to_pagebuf() internally uses
scnprintf(). Hence replace scnprintf() with cpumap_print_to_pagebuf().
Note: shared_cpu_map_show() in drivers/base/cacheinfo.c already uses
cpumap_print_to_pagebuf().
Before this patch:
# cat /sys/devices/system/cpu0/cache/index1/shared_cpu_map
00ff
#
(Notice the extra blank line).
After this patch:
# cat /sys/devices/system/cpu0/cache/index1/shared_cpu_map
00ff
#
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200629103703.4538-2-srikar@linux.vnet.ibm.com
I'm seeing RCU warnings when exiting xmon. xmon resets the NMI
watchdog, but does nothing with the RCU stall or soft lockup
watchdogs. Add a helper function that handles all three.
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200630100218.62a3c3fb@kryten.localdomain
Early secure guest boot hits the below crash while booting with
vcpus numbers aligned with page boundary for PAGE size of 64k
and LPPACA size of 1k i.e 64, 128 etc.
Partition configured for 64 cpus.
CPU maps initialized for 1 thread per core
------------[ cut here ]------------
kernel BUG at arch/powerpc/kernel/paca.c:89!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
This is due to the BUG_ON() for shared_lppaca_total_size equal to
shared_lppaca_size. Instead the code should only BUG_ON() if we have
exceeded the total_size, which indicates we've overflowed the array.
Fixes: bd104e6db6 ("powerpc/pseries/svm: Use shared memory for LPPACA structures")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
[mpe: Reword change log to clarify we're fixing not removing the check]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200619070113.16696-1-sathnaga@linux.vnet.ibm.com
In order to use <asm/percpu.h> in lockdep.h, we need to make sure
asm/percpu.h does not itself depend on lockdep.
The below seems to make that so and builds powerpc64-defconfig +
PROVE_LOCKING.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
https://lkml.kernel.org/r/20200623083721.336906073@infradead.org
Move x86's 'struct kvm_mmu_memory_cache' to common code in anticipation
of moving the entire x86 implementation code to common KVM and reusing
it for arm64 and MIPS. Add a new architecture specific asm/kvm_types.h
to control the existence and parameters of the struct. The new header
is needed to avoid a chicken-and-egg problem with asm/kvm_host.h as all
architectures define instances of the struct in their vCPU structs.
Add an asm-generic version of kvm_types.h to avoid having empty files on
PPC and s390 in the long term, and for arm64 and mips in the short term.
Suggested-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-15-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A typo caused the interrupt handler to branch immediately to the
common "unknown interrupt" handler and skip the special case test for
denormal cause.
This does not affect KVM softpatch handling (e.g., for POWER9 TM
assist) because the KVM test was moved to common code by commit
9600f261ac ("powerpc/64s/exception: Move KVM test to common code")
just before this bug was introduced.
Fixes: 3f7fbd97d0 ("powerpc/64s/exception: Clean up SRR specifiers")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
[mpe: Split selftest into a separate patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200708074942.1713396-1-npiggin@gmail.com
The method struct pci_error_handlers.error_detected() is defined and
documented as taking an 'enum pci_channel_state' for the second argument,
but most drivers use 'pci_channel_state_t' instead.
This 'pci_channel_state_t' is not a typedef for the enum but a typedef for
a bitwise type in order to have better/stricter typechecking.
Consolidate everything by using 'pci_channel_state_t' in the method's
definition, in the related helpers and in the drivers.
Enforce use of 'pci_channel_state_t' by replacing 'enum pci_channel_state'
with an anonymous 'enum'.
Note: Currently, from a typechecking point of view this patch changes
nothing because only the constants defined by the enum are bitwise, not the
enum itself (sparse doesn't have the notion of 'bitwise enum'). This may
change in some not too far future, hence the patch.
[bhelgaas: squash in
https://lore.kernel.org/r/20200702162651.49526-3-luc.vanoostenryck@gmail.comhttps://lore.kernel.org/r/20200702162651.49526-4-luc.vanoostenryck@gmail.com]
Link: https://lore.kernel.org/r/20200702162651.49526-2-luc.vanoostenryck@gmail.com
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Some Makefiles already pass -fno-stack-protector unconditionally.
For example, arch/arm64/kernel/vdso/Makefile, arch/x86/xen/Makefile.
No problem report so far about hard-coding this option. So, we can
assume all supported compilers know -fno-stack-protector.
GCC 4.8 and Clang support this option (https://godbolt.org/z/_HDGzN)
Get rid of cc-option from -fno-stack-protector.
Remove CONFIG_CC_HAS_STACKPROTECTOR_NONE, which is always 'y'.
Note:
arch/mips/vdso/Makefile adds -fno-stack-protector twice, first
unconditionally, and second conditionally. I removed the second one.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Now that HAVE_COPY_THREAD_TLS has been removed, rename copy_thread_tls()
back simply copy_thread(). It's a simpler name, and doesn't imply that only
tls is copied here. This finishes an outstanding chunk of internal process
creation work since we've added clone3().
Cc: linux-arch@vger.kernel.org
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>A
Acked-by: Stafford Horne <shorne@gmail.com>
Acked-by: Greentime Hu <green.hu@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>A
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
All architectures support copy_thread_tls() now, so remove the legacy
copy_thread() function and the HAVE_COPY_THREAD_TLS config option. Everyone
uses the same process creation calling convention based on
copy_thread_tls() and struct kernel_clone_args. This will make it easier to
maintain the core process creation code under kernel/, simplifies the
callpaths and makes the identical for all architectures.
Cc: linux-arch@vger.kernel.org
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Greentime Hu <green.hu@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Currently, most CPUFreq governors are registered at the core_initcall
time when the given governor is the default one, and the module_init
time otherwise.
In preparation for letting users specify the default governor on the
kernel command line, change all of them to be registered at the
core_initcall unconditionally, as it is already the case for the
schedutil and performance governors. This will allow us to assume
that builtin governors have been registered before the built-in
CPUFreq drivers probe.
And since all governors have similar init/exit patterns now, introduce
two new macros, cpufreq_governor_{init,exit}(), to factorize the code.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
With CONFIG_OF_ALL_DTBS=y, as set by eg. allmodconfig, we see lots of
warnings about our dts files, such as:
arch/powerpc/boot/dts/glacier.dts:492.26-532.5:
Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci"
or "pcie"
The node name should not particularly matter, it's just a name, and
AFAICS there's no kernel code that cares whether nodes are *named*
"pciex" or "pcie". So shutup these warnings by converting to the name
dtc wants.
As always there's some risk this could break something obscure that
does rely on the name, in which case we can revert.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200623130320.405852-1-mpe@ellerman.id.au
Clang warns:
arch/powerpc/boot/main.c:107:18: warning: array comparison always
evaluates to a constant [-Wtautological-compare]
if (_initrd_end > _initrd_start) {
^
arch/powerpc/boot/main.c:155:20: warning: array comparison always
evaluates to a constant [-Wtautological-compare]
if (_esm_blob_end <= _esm_blob_start)
^
2 warnings generated.
These are not true arrays, they are linker defined symbols, which are
just addresses. Using the address of operator silences the warning
and does not change the resulting assembly with either clang/ld.lld
or gcc/ld (tested with diff + objdump -Dr).
Reported-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200624035920.835571-1-natechancellor@gmail.com
Jan reported that LTP mmap03 was getting stuck in a page fault loop
after commit c46241a370 ("powerpc/pkeys: Check vma before returning
key fault error to the user"), as well as a minimised reproducer:
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/mman.h>
int main(int ac, char **av)
{
int page_sz = getpagesize();
int fildes;
char *addr;
fildes = open("tempfile", O_WRONLY | O_CREAT, 0666);
write(fildes, &fildes, sizeof(fildes));
close(fildes);
fildes = open("tempfile", O_RDONLY);
unlink("tempfile");
addr = mmap(0, page_sz, PROT_EXEC, MAP_FILE | MAP_PRIVATE, fildes, 0);
printf("%d\n", *addr);
return 0;
}
And noticed that access_pkey_error() in page fault handler now always
seem to return false:
__do_page_fault
access_pkey_error(is_pkey: 1, is_exec: 0, is_write: 0)
arch_vma_access_permitted
pkey_access_permitted
if (!is_pkey_enabled(pkey))
return true
return false
pkey_access_permitted() should not check if the pkey is available in
UAMOR (using is_pkey_enabled()). The kernel needs to do that check
only when allocating keys. This also makes sure the execute_only_key
which is marked as non-manageable via UAMOR is handled correctly in
pkey_access_permitted(), and fixes the bug.
Fixes: c46241a370 ("powerpc/pkeys: Check vma before returning key fault error to the user")
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Include bug report details etc. in the change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200627070147.297535-1-aneesh.kumar@linux.ibm.com
With CONFIG_DEBUG_VIRTUAL=y, __pa() checks for addr value and if it's
less than PAGE_OFFSET it leads to a BUG().
#define __pa(x)
({
VIRTUAL_BUG_ON((unsigned long)(x) < PAGE_OFFSET);
(unsigned long)(x) & 0x0fffffffffffffffUL;
})
kernel BUG at arch/powerpc/kvm/book3s_64_mmu_radix.c:43!
cpu 0x70: Vector: 700 (Program Check) at [c0000018a2187360]
pc: c000000000161b30: __kvmhv_copy_tofrom_guest_radix+0x130/0x1f0
lr: c000000000161d5c: kvmhv_copy_from_guest_radix+0x3c/0x80
...
kvmhv_copy_from_guest_radix+0x3c/0x80
kvmhv_load_from_eaddr+0x48/0xc0
kvmppc_ld+0x98/0x1e0
kvmppc_load_last_inst+0x50/0x90
kvmppc_hv_emulate_mmio+0x288/0x2b0
kvmppc_book3s_radix_page_fault+0xd8/0x2b0
kvmppc_book3s_hv_page_fault+0x37c/0x1050
kvmppc_vcpu_run_hv+0xbb8/0x1080
kvmppc_vcpu_run+0x34/0x50
kvm_arch_vcpu_ioctl_run+0x2fc/0x410
kvm_vcpu_ioctl+0x2b4/0x8f0
ksys_ioctl+0xf4/0x150
sys_ioctl+0x28/0x80
system_call_exception+0x104/0x1d0
system_call_common+0xe8/0x214
kvmhv_copy_tofrom_guest_radix() uses a NULL value for to/from to
indicate direction of copy.
Avoid calling __pa() if the value is NULL to avoid the BUG().
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Massage change log a bit to mention CONFIG_DEBUG_VIRTUAL]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200611120159.680284-1-aneesh.kumar@linux.ibm.com
Building the current 5.8 kernel for an e500 machine with
CONFIG_RANDOMIZE_BASE=y and CONFIG_BLOCK=n yields the following
failure:
arch/powerpc/mm/nohash/kaslr_booke.c: In function 'kaslr_early_init':
arch/powerpc/mm/nohash/kaslr_booke.c:387:2: error: implicit
declaration of function 'flush_icache_range'; did you mean 'flush_tlb_range'?
Indeed, including asm/cacheflush.h into kaslr_booke.c fixes the build.
Fixes: 2b0e86cc5d ("powerpc/fsl_booke/32: implement KASLR infrastructure")
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Acked-by: Scott Wood <oss@buserror.net>
[mpe: Tweak change log to mention CONFIG_BLOCK=n]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200613162801.1946619-1-asolokha@kb.kras.ru
Move ptep_get() close to pte_update(), in an ifdef section already
dedicated to powerpc 8xx. This section contains explanation about
the layout of page table entries.
Also modify it to return 4 times the pte value instead of padding
with zeroes.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9f2df6621fcaf9eba15fadc61c169d0c8e2fb849.1592481938.git.christophe.leroy@csgroup.eu
With hash translation, the hypervisor can hint the LPAR about 16GB contiguous range
via ibm,expected#pages. The kernel marks the range specified in the device tree
as reserved. Avoid doing this when using radix translation. Radix translation
only supports 1G gigantic hugepage and kernel can do the 1G gigantic hugepage
allocation via early memblock reservation. This can be done because with radix
translation pages are not required to be contiguous on the host.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200622064019.16682-1-aneesh.kumar@linux.ibm.com
FIX_EARLY_DEBUG_BASE reserves a 128k area for debuging.
When page size is 256k, the calculation results in a 0 number of
pages, leading to the following failure:
CC arch/powerpc/kernel/asm-offsets.s
In file included from ./arch/powerpc/include/asm/nohash/32/pgtable.h:77:0,
from ./arch/powerpc/include/asm/nohash/pgtable.h:8,
from ./arch/powerpc/include/asm/pgtable.h:20,
from ./include/linux/pgtable.h:6,
from ./arch/powerpc/include/asm/kup.h:42,
from ./arch/powerpc/include/asm/uaccess.h:9,
from ./include/linux/uaccess.h:11,
from ./include/linux/crypto.h:21,
from ./include/crypto/hash.h:11,
from ./include/linux/uio.h:10,
from ./include/linux/socket.h:8,
from ./include/linux/compat.h:15,
from arch/powerpc/kernel/asm-offsets.c:14:
./arch/powerpc/include/asm/fixmap.h:75:2: error: overflow in enumeration values
__end_of_permanent_fixed_addresses,
^
make[2]: *** [arch/powerpc/kernel/asm-offsets.s] Error 1
Ensure the debug area is at least one page.
Fixes: b8e8efaa86 ("powerpc: reserve fixmap entries for early debug")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ca8c9f8249f523b1fab873e67b81b11989d46553.1592207216.git.christophe.leroy@csgroup.eu
The iommu_table_ops::xchg_no_kill() callback updates TCE. It is quite
possible that not entire table is allocated if it is huge and multilevel
so xchg may also allocate subtables. If failed, it returns H_HARDWARE
for failed allocation and H_TOO_HARD if it needs it but cannot do because
the alloc parameter is "false" (set when called with MMU=off to force
retry with MMU=on).
The problem is that having separate errors only matters in real mode
(MMU=off) but the only caller with alloc="false" does not check the exact
error code and simply returns H_TOO_HARD; and for every other mode
alloc is "true". Also, the function is also called from the ioctl()
handler of the VFIO SPAPR TCE IOMMU subdriver which does not expect
hypervisor error codes (H_xxx) and will expose them to the userspace.
This converts wrong error codes to -ENOMEM.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200617003835.48831-1-aik@ozlabs.ru
IS_ENABLED() matches names exactly, so the missing "CONFIG_" prefix
means this code would never be built.
Also fixes a missing newline in pr_warn().
Fixes: 970d54f99c ("powerpc/book3s64/hash: Disable 16M linear mapping size if not aligned")
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/202006050717.A2F9809E@keescook
Since commit cbe46bd4f5 ("powerpc: remove CONFIG_CMDLINE #ifdef mess")
CONFIG_CMDLINE has always had a value regardless of CONFIG_CMDLINE_BOOL.
For example:
$ make ARCH=powerpc defconfig
$ cat .config
# CONFIG_CMDLINE_BOOL is not set
CONFIG_CMDLINE=""
When enabling CONFIG_CMDLINE_BOOL this value is kept making the 'default
"..." if CONFIG_CMDLINE_BOOL' ineffective.
$ ./scripts/config --enable CONFIG_CMDLINE_BOOL
$ cat .config
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
Remove CONFIG_CMDLINE_BOOL and the inaccessible default.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200611224220.25066-2-chris.packham@alliedtelesis.co.nz
blrl is not recommended to use as an indirect function call, as it may
corrupt the link stack predictor.
This is not a performance critical path but this should be fixed for
consistency.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200611121119.1015740-1-npiggin@gmail.com
One fix for the interrupt rework we did last release which broke KVM-PR.
Three commits fixing some fallout from the READ_ONCE() changes interacting badly
with our 8xx 16K pages support, which uses a pte_t that is a structure of 4
actual PTEs.
A cleanup of the 8xx pte_update() to use the newly added pmd_off().
A fix for a crash when handling an oops if CONFIG_DEBUG_VIRTUAL is enabled.
A minor fix for the SPU syscall generation.
Thanks to:
Aneesh Kumar K.V, Christian Zigotzky, Christophe Leroy, Mike Rapoport,
Nicholas Piggin.
-----BEGIN PGP SIGNATURE-----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=qws5
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- One fix for the interrupt rework we did last release which broke
KVM-PR
- Three commits fixing some fallout from the READ_ONCE() changes
interacting badly with our 8xx 16K pages support, which uses a pte_t
that is a structure of 4 actual PTEs
- A cleanup of the 8xx pte_update() to use the newly added pmd_off()
- A fix for a crash when handling an oops if CONFIG_DEBUG_VIRTUAL is
enabled
- A minor fix for the SPU syscall generation
Thanks to Aneesh Kumar K.V, Christian Zigotzky, Christophe Leroy, Mike
Rapoport, Nicholas Piggin.
* tag 'powerpc-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/8xx: Provide ptep_get() with 16k pages
mm: Allow arches to provide ptep_get()
mm/gup: Use huge_ptep_get() in gup_hugepte()
powerpc/syscalls: Use the number when building SPU syscall table
powerpc/8xx: use pmd_off() to access a PMD entry in pte_update()
powerpc/64s: Fix KVM interrupt using wrong save area
powerpc: Fix kernel crash in show_instructions() w/DEBUG_VIRTUAL
- Fix the visibility of the region 'align' attribute. The new unit tests
for region alignment handling caught a corner case where the alignment
cannot be specified if the region is converted from static to dynamic
provisioning at runtime.
- Add support for device health retrieval for the persistent memory
supported by the papr_scm driver. This includes both the standard
sysfs "health flags" that the nfit persistent memory driver publishes
and a mechanism for the ndctl tool to retrieve a health-command payload.
-----BEGIN PGP SIGNATURE-----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=qVy4
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"A feature (papr_scm health retrieval) and a fix (sysfs attribute
visibility) for v5.8.
Vaibhav explains in the merge commit below why missing v5.8 would be
painful and I agreed to try a -rc2 pull because only cosmetics kept
this out of -rc1 and his initial versions were posted in more than
enough time for v5.8 consideration:
'These patches are tied to specific features that were committed to
customers in upcoming distros releases (RHEL and SLES) whose
time-lines are tied to 5.8 kernel release.
Being able to track the health of an nvdimm is critical for our
customers that are running workloads leveraging papr-scm nvdimms.
Missing the 5.8 kernel would mean missing the distro timelines and
shifting forward the availability of this feature in distro kernels
by at least 6 months'
Summary:
- Fix the visibility of the region 'align' attribute.
The new unit tests for region alignment handling caught a corner
case where the alignment cannot be specified if the region is
converted from static to dynamic provisioning at runtime.
- Add support for device health retrieval for the persistent memory
supported by the papr_scm driver.
This includes both the standard sysfs "health flags" that the nfit
persistent memory driver publishes and a mechanism for the ndctl
tool to retrieve a health-command payload"
* tag 'libnvdimm-for-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm/region: always show the 'align' attribute
powerpc/papr_scm: Implement support for PAPR_PDSM_HEALTH
ndctl/papr_scm,uapi: Add support for PAPR nvdimm specific methods
powerpc/papr_scm: Improve error logging and handling papr_scm_ndctl()
powerpc/papr_scm: Fetch nvdimm health information from PHYP
seq_buf: Export seq_buf_printf
powerpc: Document details on H_SCM_HEALTH hcall
READ_ONCE() now enforces atomic read, which leads to:
CC mm/gup.o
In file included from ./include/linux/kernel.h:11:0,
from mm/gup.c:2:
In function 'gup_hugepte.constprop',
inlined from 'gup_huge_pd.isra.79' at mm/gup.c:2465:8:
./include/linux/compiler.h:392:38: error: call to '__compiletime_assert_222' declared with attribute error: Unsupported access size for {READ,WRITE}_ONCE().
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^
./include/linux/compiler.h:373:4: note: in definition of macro '__compiletime_assert'
prefix ## suffix(); \
^
./include/linux/compiler.h:392:2: note: in expansion of macro '_compiletime_assert'
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^
./include/linux/compiler.h:405:2: note: in expansion of macro 'compiletime_assert'
compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \
^
./include/linux/compiler.h:291:2: note: in expansion of macro 'compiletime_assert_rwonce_type'
compiletime_assert_rwonce_type(x); \
^
mm/gup.c:2428:8: note: in expansion of macro 'READ_ONCE'
pte = READ_ONCE(*ptep);
^
In function 'gup_get_pte',
inlined from 'gup_pte_range' at mm/gup.c:2228:9,
inlined from 'gup_pmd_range' at mm/gup.c:2613:15,
inlined from 'gup_pud_range' at mm/gup.c:2641:15,
inlined from 'gup_p4d_range' at mm/gup.c:2666:15,
inlined from 'gup_pgd_range' at mm/gup.c:2694:15,
inlined from 'internal_get_user_pages_fast' at mm/gup.c:2795:3:
./include/linux/compiler.h:392:38: error: call to '__compiletime_assert_219' declared with attribute error: Unsupported access size for {READ,WRITE}_ONCE().
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^
./include/linux/compiler.h:373:4: note: in definition of macro '__compiletime_assert'
prefix ## suffix(); \
^
./include/linux/compiler.h:392:2: note: in expansion of macro '_compiletime_assert'
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^
./include/linux/compiler.h:405:2: note: in expansion of macro 'compiletime_assert'
compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \
^
./include/linux/compiler.h:291:2: note: in expansion of macro 'compiletime_assert_rwonce_type'
compiletime_assert_rwonce_type(x); \
^
mm/gup.c:2199:9: note: in expansion of macro 'READ_ONCE'
return READ_ONCE(*ptep);
^
make[2]: *** [mm/gup.o] Error 1
Define ptep_get() on 8xx when using 16k pages.
Fixes: 9e343b467c ("READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/341688399c1b102756046d19ea6ce39db1ae4742.1592225558.git.christophe.leroy@csgroup.eu
Now that we've renamed probe_kernel_address() to get_kernel_nofault()
and made it look and behave more in line with get_user(), some of the
subtle type behavior differences end up being more obvious and possibly
dangerous.
When you do
get_user(val, user_ptr);
the type of the access comes from the "user_ptr" part, and the above
basically acts as
val = *user_ptr;
by design (except, of course, for the fact that the actual dereference
is done with a user access).
Note how in the above case, the type of the end result comes from the
pointer argument, and then the value is cast to the type of 'val' as
part of the assignment.
So the type of the pointer is ultimately the more important type both
for the access itself.
But 'get_kernel_nofault()' may now _look_ similar, but it behaves very
differently. When you do
get_kernel_nofault(val, kernel_ptr);
it behaves like
val = *(typeof(val) *)kernel_ptr;
except, of course, for the fact that the actual dereference is done with
exception handling so that a faulting access is suppressed and returned
as the error code.
But note how different the casting behavior of the two superficially
similar accesses are: one does the actual access in the size of the type
the pointer points to, while the other does the access in the size of
the target, and ignores the pointer type entirely.
Actually changing get_kernel_nofault() to act like get_user() is almost
certainly the right thing to do eventually, but in the meantime this
patch adds logit to at least verify that the pointer type is compatible
with the type of the result.
In many cases, this involves just casting the pointer to 'void *' to
make it obvious that the type of the pointer is not the important part.
It's not how 'get_user()' acts, but at least the behavioral difference
is now obvious and explicit.
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Better describe what this helper does, and match the naming of
copy_from_kernel_nofault.
Also switch the argument order around, so that it acts and looks
like get_user().
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently the macro that inserts entries into the SPU syscall table
doesn't actually use the "nr" (syscall number) parameter.
This does work, but it relies on the exact right number of syscall
entries being emitted in order for the syscal numbers to line up with
the array entries. If for example we had two entries with the same
syscall number we wouldn't get an error, it would just cause all
subsequent syscalls to be off by one in the spu_syscall_table.
So instead change the macro to assign to the specific entry of the
array, meaning any numbering overlap will be caught by the compiler.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200616135617.2937252-1-mpe@ellerman.id.au
The pte_update() implementation for PPC_8xx unfolds page table from the PGD
level to access a PMD entry. Since 8xx has only 2-level page table this can
be simplified with pmd_off() shortcut.
Replace explicit unfolding with pmd_off() and drop defines of pgd_index()
and pgd_offset() that are no longer needed.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200615092229.23142-1-rppt@kernel.org
The CTR register reload in the KVM interrupt path used the wrong save
area for SLB (and NMI) interrupts.
Fixes: 9600f261ac ("powerpc/64s/exception: Move KVM test to common code")
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200615061247.1310763-1-npiggin@gmail.com
This patch implements support for PDSM request 'PAPR_PDSM_HEALTH'
that returns a newly introduced 'struct nd_papr_pdsm_health' instance
containing dimm health information back to user space in response to
ND_CMD_CALL. This functionality is implemented in newly introduced
papr_pdsm_health() that queries the nvdimm health information and
then copies this information to the package payload whose layout is
defined by 'struct nd_papr_pdsm_health'.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20200615124407.32596-7-vaibhav@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Introduce support for PAPR NVDIMM Specific Methods (PDSM) in papr_scm
module and add the command family NVDIMM_FAMILY_PAPR to the white list
of NVDIMM command sets. Also advertise support for ND_CMD_CALL for the
nvdimm command mask and implement necessary scaffolding in the module
to handle ND_CMD_CALL ioctl and PDSM requests that we receive.
The layout of the PDSM request as we expect from libnvdimm/libndctl is
described in newly introduced uapi header 'papr_pdsm.h' which
defines a 'struct nd_pkg_pdsm' and a maximal union named
'nd_pdsm_payload'. These new structs together with 'struct nd_cmd_pkg'
for a pdsm envelop thats sent by libndctl to libnvdimm and serviced by
papr_scm in 'papr_scm_service_pdsm()'. The PDSM request is
communicated by member 'struct nd_cmd_pkg.nd_command' together with
other information on the pdsm payload (size-in, size-out).
The patch also introduces 'struct pdsm_cmd_desc' instances of which
are stored in an array __pdsm_cmd_descriptors[] indexed with PDSM cmd
and corresponding access function pdsm_cmd_desc() is
introduced. 'struct pdsm_cdm_desc' holds the service function for a
given PDSM and corresponding payload in/out sizes.
A new function papr_scm_service_pdsm() is introduced and is called from
papr_scm_ndctl() in case of a PDSM request is received via ND_CMD_CALL
command from libnvdimm. The function performs validation on the PDSM
payload based on info present in corresponding PDSM descriptor and if
valid calls the 'struct pdcm_cmd_desc.service' function to service the
PDSM.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20200615124407.32596-6-vaibhav@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Since papr_scm_ndctl() can be called from outside papr_scm, its
exposed to the possibility of receiving NULL as value of 'cmd_rc'
argument. This patch updates papr_scm_ndctl() to protect against such
possibility by assigning it pointer to a local variable in case cmd_rc
== NULL.
Finally the patch also updates the 'default' add a debug log unknown
'cmd' values.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20200615124407.32596-5-vaibhav@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Implement support for fetching nvdimm health information via
H_SCM_HEALTH hcall as documented in Ref[1]. The hcall returns a pair
of 64-bit bitmap, bitwise-and of which is then stored in
'struct papr_scm_priv' and subsequently partially exposed to
user-space via newly introduced dimm specific attribute
'papr/flags'. Since the hcall is costly, the health information is
cached and only re-queried, 60s after the previous successful hcall.
The patch also adds a documentation text describing flags reported by
the the new sysfs attribute 'papr/flags' is also introduced at
Documentation/ABI/testing/sysfs-bus-papr-pmem.
[1] commit 58b278f568 ("powerpc: Provide initial documentation for
PAPR hcalls")
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20200615124407.32596-4-vaibhav@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
With CONFIG_DEBUG_VIRTUAL=y, we can hit a BUG() if we take a hard
lockup watchdog interrupt when in OPAL mode.
This happens in show_instructions() if the kernel takes the watchdog
NMI IPI, or any other interrupt, with MSR_IR == 0. show_instructions()
updates the variable pc in the loop and the second iteration will
result in BUG().
We hit the BUG_ON due the below check in __va()
#define __va(x)
({
VIRTUAL_BUG_ON((unsigned long)(x) >= PAGE_OFFSET);
(void *)(unsigned long)((phys_addr_t)(x) | PAGE_OFFSET);
})
Fix it by moving the check out of the loop. Also update nip so that
the nip == pc check still matches.
Fixes: 4dd7554a64 ("powerpc/64: Add VIRTUAL_BUG_ON checks for __va and __pa addresses")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Use IS_ENABLED(), massage change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200524093822.423487-1-aneesh.kumar@linux.ibm.com
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
-----BEGIN PGP SIGNATURE-----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=1NIT
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
treewide: replace '---help---' in Kconfig files with 'help'
kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
samples: binderfs: really compile this sample and fix build issues
One fix for a recent change which broke nested KVM guests on Power9.
Thanks to:
Alexey Kardashevskiy.
-----BEGIN PGP SIGNATURE-----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=5zJH
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"One fix for a recent change which broke nested KVM guests on Power9.
Thanks to Alexey Kardashevskiy"
* tag 'powerpc-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Fix nested guest RC bits update
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Loongson port
PPC:
- Fixes
ARM:
- Fixes
x86:
- KVM_SET_USER_MEMORY_REGION optimizations
- Fixes
- Selftest fixes
The guest side of the asynchronous page fault work has been delayed to 5.9
in order to sync with Thomas's interrupt entry rework.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl7icj4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPHGQgAj9+5j+f5v06iMP/+ponWwsVfh+5/
UR1gPbpMSFMKF0U+BCFxsBeGKWPDiz9QXaLfy6UGfOFYBI475Su5SoZ8/i/o6a2V
QjcKIJxBRNs66IG/774pIpONY8/mm/3b6vxmQktyBTqjb6XMGlOwoGZixj/RTp85
+uwSICxMlrijg+fhFMwC4Bo/8SFg+FeBVbwR07my88JaLj+3cV/NPolG900qLSa6
uPqJ289EQ86LrHIHXCEWRKYvwy77GFsmBYjKZH8yXpdzUlSGNexV8eIMAz50figu
wYRJGmHrRqwuzFwEGknv8SA3s2HVggXO4WVkWWCeJyO8nIVfYFUhME5l6Q==
=+Hh0
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Paolo Bonzini:
"The guest side of the asynchronous page fault work has been delayed to
5.9 in order to sync with Thomas's interrupt entry rework, but here's
the rest of the KVM updates for this merge window.
MIPS:
- Loongson port
PPC:
- Fixes
ARM:
- Fixes
x86:
- KVM_SET_USER_MEMORY_REGION optimizations
- Fixes
- Selftest fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (62 commits)
KVM: x86: do not pass poisoned hva to __kvm_set_memory_region
KVM: selftests: fix sync_with_host() in smm_test
KVM: async_pf: Inject 'page ready' event only if 'page not present' was previously injected
KVM: async_pf: Cleanup kvm_setup_async_pf()
kvm: i8254: remove redundant assignment to pointer s
KVM: x86: respect singlestep when emulating instruction
KVM: selftests: Don't probe KVM_CAP_HYPERV_ENLIGHTENED_VMCS when nested VMX is unsupported
KVM: selftests: do not substitute SVM/VMX check with KVM_CAP_NESTED_STATE check
KVM: nVMX: Consult only the "basic" exit reason when routing nested exit
KVM: arm64: Move hyp_symbol_addr() to kvm_asm.h
KVM: arm64: Synchronize sysreg state on injecting an AArch32 exception
KVM: arm64: Make vcpu_cp1x() work on Big Endian hosts
KVM: arm64: Remove host_cpu_context member from vcpu structure
KVM: arm64: Stop sparse from moaning at __hyp_this_cpu_ptr
KVM: arm64: Handle PtrAuth traps early
KVM: x86: Unexport x86_fpu_cache and make it static
KVM: selftests: Ignore KVM 5-level paging support for VM_MODE_PXXV48_4K
KVM: arm64: Save the host's PtrAuth keys in non-preemptible context
KVM: arm64: Stop save/restoring ACTLR_EL1
KVM: arm64: Add emulation for 32bit guests accessing ACTLR2
...
Before commit 6cdf30375f ("powerpc/kvm/book3s: Use kvm helpers
to walk shadow or secondary table") we called __find_linux_pte() with
a page table pointer from a kvm_nested_guest struct but
now we rely on kvmhv_find_nested() which takes an L1 LPID and returns
a kvm_nested_guest pointer, however we pass a L0 LPID there and
the L2 guest hangs.
This fixes the LPID passed to kvmppc_hv_handle_set_rc().
Fixes: 6cdf30375f ("powerpc/kvm/book3s: Use kvm helpers to walk shadow or secondary table")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200611030559.75257-1-aik@ozlabs.ru
Merge some more updates from Andrew Morton:
- various hotfixes and minor things
- hch's use_mm/unuse_mm clearnups
Subsystems affected by this patch series: mm/hugetlb, scripts, kcov,
lib, nilfs, checkpatch, lib, mm/debug, ocfs2, lib, misc.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kernel: set USER_DS in kthread_use_mm
kernel: better document the use_mm/unuse_mm API contract
kernel: move use_mm/unuse_mm to kthread.c
kernel: move use_mm/unuse_mm to kthread.c
stacktrace: cleanup inconsistent variable type
lib: test get_count_order/long in test_bitops.c
mm: add comments on pglist_data zones
ocfs2: fix spelling mistake and grammar
mm/debug_vm_pgtable: fix kernel crash by checking for THP support
lib: fix bitmap_parse() on 64-bit big endian archs
checkpatch: correct check for kernel parameters doc
nilfs2: fix null pointer dereference at nilfs_segctor_do_construct()
lib/lz4/lz4_decompress.c: document deliberate use of `&'
kcov: check kcov_softirq in kcov_remote_stop()
scripts/spelling: add a few more typos
khugepaged: selftests: fix timeout condition in wait_for_scan()
Switch the function documentation to kerneldoc comments, and add
WARN_ON_ONCE asserts that the calling thread is a kernel thread and does
not have ->mm set (or has ->mm set in the case of unuse_mm).
Also give the functions a kthread_ prefix to better document the use case.
[hch@lst.de: fix a comment typo, cover the newly merged use_mm/unuse_mm caller in vfio]
Link: http://lkml.kernel.org/r/20200416053158.586887-3-hch@lst.de
[sfr@canb.auug.org.au: powerpc/vas: fix up for {un}use_mm() rename]
Link: http://lkml.kernel.org/r/20200422163935.5aa93ba5@canb.auug.org.au
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [usb]
Acked-by: Haren Myneni <haren@linux.ibm.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Link: http://lkml.kernel.org/r/20200404094101.672954-6-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All architectures define pte_index() as
(address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)
and all architectures define pte_offset_kernel() as an entry in the array
of PTEs indexed by the pte_index().
For the most architectures the pte_offset_kernel() implementation relies
on the availability of pmd_page_vaddr() that converts a PMD entry value to
the virtual address of the page containing PTEs array.
Let's move x86 definitions of the PTE accessors to the generic place in
<linux/pgtable.h> and then simply drop the respective definitions from the
other architectures.
The architectures that didn't provide pmd_page_vaddr() are updated to have
that defined.
The generic implementation of pte_offset_kernel() can be overridden by an
architecture and alpha makes use of this because it has special ordering
requirements for its version of pte_offset_kernel().
[rppt@linux.ibm.com: v2]
Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org
[rppt@linux.ibm.com: update]
Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org
[rppt@linux.ibm.com: update]
Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org
[akpm@linux-foundation.org: fix x86 warning]
[sfr@canb.auug.org.au: fix powerpc build]
Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The powerpc 32-bit implementation of pgtable has nice shortcuts for
accessing kernel PMD and PTE for a given virtual address. Make these
helpers available for all architectures.
[rppt@linux.ibm.com: microblaze: fix page table traversal in setup_rt_frame()]
Link: http://lkml.kernel.org/r/20200518191511.GD1118872@kernel.org
[akpm@linux-foundation.org: s/pmd_ptr_k/pmd_off_k/ in various powerpc places]
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-9-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes. Fix this up with the aid of
the below script and manual adjustments here and there.
import sys
import re
if len(sys.argv) is not 3:
print "USAGE: %s <file> <header>" % (sys.argv[0])
sys.exit(1)
hdr_to_move="#include <linux/%s>" % sys.argv[2]
moved = False
in_hdrs = False
with open(sys.argv[1], "r") as f:
lines = f.readlines()
for _line in lines:
line = _line.rstrip('
')
if line == hdr_to_move:
continue
if line.startswith("#include <linux/"):
in_hdrs = True
elif not moved and in_hdrs:
moved = True
print hdr_to_move
print line
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.
Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: consolidate definitions of page table accessors", v2.
The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once. For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.
Most of these definitions are actually identical and typically it boils
down to, e.g.
static inline unsigned long pmd_index(unsigned long address)
{
return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}
static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}
These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.
For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.
These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.
This patch (of 12):
The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the
functions involving page table manipulations, e.g. pte_alloc() and
pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h>
in the files that include <linux/mm.h>.
The include statements in such cases are remove with a simple loop:
for f in $(git grep -l "include <linux/mm.h>") ; do
sed -i -e '/include <asm\/pgtable.h>/ d' $f
done
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now the last users of show_stack() got converted to use an explicit log
level, show_stack_loglvl() can drop it's redundant suffix and become once
again well known show_stack().
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200418201944.482088-51-dima@arista.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
[1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#u
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Link: http://lkml.kernel.org/r/20200418201944.482088-27-dima@arista.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The function currently known as flush_icache_user_range only operates on
a single page. Rename it to flush_icache_user_page as we'll need the
name flush_icache_user_range for something else soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20200515143646.3857579-20-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Power needs almost no cache flushing routines of its own. Rely on
asm-generic/cacheflush.h for the defaults.
Also remove the pointless __KERNEL__ ifdef while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: http://lkml.kernel.org/r/20200515143646.3857579-17-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
flush_icache_user_range is only used by copy_to_user_page, which is only
used by core VM code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: http://lkml.kernel.org/r/20200515143646.3857579-4-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
API __get_user_pages_fast() renamed to get_user_pages_fast_only() to
align with pin_user_pages_fast_only().
As part of this we will get rid of write parameter. Instead caller will
pass FOLL_WRITE to get_user_pages_fast_only(). This will not change any
existing functionality of the API.
All the callers are changed to pass FOLL_WRITE.
Also introduce get_user_page_fast_only(), and use it in a few places
that hard-code nr_pages to 1.
Updated the documentation of the API.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Paul Mackerras <paulus@ozlabs.org> [arch/powerpc/kvm]
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michal Suchanek <msuchanek@suse.de>
Link: http://lkml.kernel.org/r/1590396812-31277-1-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is the tty and serial driver updates for 5.8-rc1
Nothing huge at all, just a lot of little serial driver fixes, updates
for new devices and features, and other small things. Full details are
in the shortlog.
Note, you will get a conflict merging with your tree in the
Documentation/devicetree/bindings/serial/rs485.yaml file, but it should
be pretty obvious what to do. If not, I'm sure Rob will clean it all up
afterwards :)
All of these have been in linux-next with no issues for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzpCg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRxACgjGtOKPjahONL4lWd0F8ZYEcyw7sAn34woBCO
BDUV3kolrRQ4OYNJWsHP
=TvqG
-----END PGP SIGNATURE-----
Merge tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the tty and serial driver updates for 5.8-rc1
Nothing huge at all, just a lot of little serial driver fixes, updates
for new devices and features, and other small things. Full details are
in the shortlog.
All of these have been in linux-next with no issues for a while"
* tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (67 commits)
tty: serial: qcom_geni_serial: Add 51.2MHz frequency support
tty: serial: imx: clear Ageing Timer Interrupt in handler
serial: 8250_fintek: Add F81966 Support
sc16is7xx: Add flag to activate IrDA mode
dt-bindings: sc16is7xx: Add flag to activate IrDA mode
serial: 8250: Support rs485 bus termination GPIO
serial: 8520_port: Fix function param documentation
dt-bindings: serial: Add binding for rs485 bus termination GPIO
vt: keyboard: avoid signed integer overflow in k_ascii
serial: 8250: Enable 16550A variants by default on non-x86
tty: hvc_console, fix crashes on parallel open/close
serial: imx: Initialize lock for non-registered console
sc16is7xx: Read the LSR register for basic device presence check
sc16is7xx: Allow sharing the IRQ line
sc16is7xx: Use threaded IRQ
sc16is7xx: Always use falling edge IRQ
tty: n_gsm: Fix bogus i++ in gsm_data_kick
tty: n_gsm: Remove unnecessary test in gsm_print_packet()
serial: stm32: add no_console_suspend support
tty: serial: fsl_lpuart: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
...
- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to make it
safe against parallel page table manipulations without relying on an IPI for
serialisation.
- A series of fixes & enhancements to make our machine check handling more
robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions on
Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound driver.
- Removal of some obsolete 40x platforms and associated cruft.
- Initial support for booting on Power10.
- Lots of other small features, cleanups & fixes.
Thanks to:
Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Andrey Abramov,
Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent Abali, Cédric Le
Goater, Chen Zhou, Christian Zigotzky, Christophe JAILLET, Christophe Leroy,
Dmitry Torokhov, Emmanuel Nicolet, Erhard F., Gautham R. Shenoy, Geoff Levand,
George Spelvin, Greg Kurz, Gustavo A. R. Silva, Gustavo Walbon, Haren Myneni,
Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Kees Cook, Leonardo
Bras, Madhavan Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael
Neuling, Michal Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao,
Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram
Pai, Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler, Wolfram
Sang, Xiongfeng Wang.
-----BEGIN PGP SIGNATURE-----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=o0WU
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to
make it safe against parallel page table manipulations without
relying on an IPI for serialisation.
- A series of fixes & enhancements to make our machine check handling
more robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions
on Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound
driver.
- Removal of some obsolete 40x platforms and associated cruft.
- Initial support for booting on Power10.
- Lots of other small features, cleanups & fixes.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan,
Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent
Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe
JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F.,
Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A.
R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan
Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal
Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai,
Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler,
Wolfram Sang, Xiongfeng Wang.
* tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits)
powerpc/pseries: Make vio and ibmebus initcalls pseries specific
cxl: Remove dead Kconfig options
powerpc: Add POWER10 architected mode
powerpc/dt_cpu_ftrs: Add MMA feature
powerpc/dt_cpu_ftrs: Enable Prefixed Instructions
powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected
powerpc: Add support for ISA v3.1
powerpc: Add new HWCAP bits
powerpc/64s: Don't set FSCR bits in INIT_THREAD
powerpc/64s: Save FSCR to init_task.thread.fscr after feature init
powerpc/64s: Don't let DT CPU features set FSCR_DSCR
powerpc/64s: Don't init FSCR_DSCR in __init_FSCR()
powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG
powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel
powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations
powerpc/module_64: Consolidate ftrace code
powerpc/32: Disable KASAN with pages bigger than 16k
powerpc/uaccess: Don't set KUEP by default on book3s/32
powerpc/uaccess: Don't set KUAP by default on book3s/32
powerpc/8xx: Reduce time spent in allow_user_access() and friends
...
In commit 53cdc1cb29 ("drivers/base/memory.c: indicate all memory blocks
as removable"), the user space interface to compute whether a memory block
can be offlined (exposed via /sys/devices/system/memory/memoryX/removable)
has effectively been deprecated. We want to remove the leftovers of the
kernel implementation.
When offlining a memory block (mm/memory_hotplug.c:__offline_pages()),
we'll start by:
1. Testing if it contains any holes, and reject if so
2. Testing if pages belong to different zones, and reject if so
3. Isolating the page range, checking if it contains any unmovable pages
Using is_mem_section_removable() before trying to offline is not only
racy, it can easily result in false positives/negatives. Let's stop
manually checking is_mem_section_removable(), and let device_offline()
handle it completely instead. We can remove the racy
is_mem_section_removable() implementation next.
We now take more locks (e.g., memory hotplug lock when offlining and the
zone lock when isolating), but maybe we should optimize that
implementation instead if this ever becomes a real problem (after all,
memory unplug is already an expensive operation). We started using
is_mem_section_removable() in commit 51925fb3c5 ("powerpc/pseries:
Implement memory hotplug remove in the kernel"), with the initial
hotremove support of lmbs.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Link: http://lkml.kernel.org/r/20200407135416.24093-2-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Most architectures define kmap_prot to be PAGE_KERNEL.
Let sparc and xtensa define there own and define PAGE_KERNEL as the
default if not overridden.
[akpm@linux-foundation.org: coding style fixes]
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200507150004.1423069-16-ira.weiny@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To support kmap_atomic_prot(), all architectures need to support
protections passed to their kmap_atomic_high() function. Pass protections
into kmap_atomic_high() and change the name to kmap_atomic_high_prot() to
match.
Then define kmap_atomic_prot() as a core function which calls
kmap_atomic_high_prot() when needed.
Finally, redefine kmap_atomic() as a wrapper of kmap_atomic_prot() with
the default kmap_prot exported by the architectures.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200507150004.1423069-11-ira.weiny@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We want to support kmap_atomic_prot() on all architectures and it makes
sense to define kmap_atomic() to use the default kmap_prot.
So we ensure all arch's have a globally available kmap_prot either as a
define or exported symbol.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200507150004.1423069-9-ira.weiny@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Every single architecture (including !CONFIG_HIGHMEM) calls...
pagefault_enable();
preempt_enable();
... before returning from __kunmap_atomic(). Lift this code into the
kunmap_atomic() macro.
While we are at it rename __kunmap_atomic() to kunmap_atomic_high() to
be consistent.
[ira.weiny@intel.com: don't enable pagefault/preempt twice]
Link: http://lkml.kernel.org/r/20200518184843.3029640-1-ira.weiny@intel.com
[akpm@linux-foundation.org: coding style fixes]
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Link: http://lkml.kernel.org/r/20200507150004.1423069-8-ira.weiny@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Every arch has the same code to ensure atomic operations and a check for
!HIGHMEM page.
Remove the duplicate code by defining a core kmap_atomic() which only
calls the arch specific kmap_atomic_high() when the page is high memory.
[akpm@linux-foundation.org: coding style fixes]
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200507150004.1423069-7-ira.weiny@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
During this kmap() conversion series we must maintain bisect-ability. To
do this, kmap_atomic_prot() in x86, powerpc, and microblaze need to remain
functional.
Create a temporary inline version of kmap_atomic_prot within these
architectures so we can rework their kmap_atomic() calls and then lift
kmap_atomic_prot() to the core.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200507150004.1423069-6-ira.weiny@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All architectures do exactly the same thing for kunmap(); remove all the
duplicate definitions and lift the call to the core.
This also has the benefit of changing kmap_unmap() on a number of
architectures to be an inline call rather than an actual function.
[akpm@linux-foundation.org: fix CONFIG_HIGHMEM=n build on various architectures]
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200507150004.1423069-5-ira.weiny@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kmap code for all the architectures is almost 100% identical.
Lift the common code to the core. Use ARCH_HAS_KMAP_FLUSH_TLB to indicate
if an arch defines kmap_flush_tlb() and call if if needed.
This also has the benefit of changing kmap() on a number of architectures
to be an inline call rather than an actual function.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200507150004.1423069-4-ira.weiny@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Remove duplicated kmap code", v3.
The kmap infrastructure has been copied almost verbatim to every
architecture. This series consolidates obvious duplicated code by
defining core functions which call into the architectures only when
needed.
Some of the k[un]map_atomic() implementations have some similarities but
the similarities were not sufficient to warrant further changes.
In addition we remove a duplicate implementation of kmap() in DRM.
This patch (of 15):
Replace the use of BUG_ON(in_interrupt()) in the kmap() and kunmap() in
favor of might_sleep().
Besides the benefits of might_sleep(), this normalizes the implementations
such that they can be made generic in subsequent patches.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Link: http://lkml.kernel.org/r/20200507150004.1423069-1-ira.weiny@intel.com
Link: http://lkml.kernel.org/r/20200507150004.1423069-2-ira.weiny@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds tests which will validate architecture page table helpers and
other accessors in their compliance with expected generic MM semantics.
This will help various architectures in validating changes to existing
page table helpers or addition of new ones.
This test covers basic page table entry transformations including but not
limited to old, young, dirty, clean, write, write protect etc at various
level along with populating intermediate entries with next page table page
and validating them.
Test page table pages are allocated from system memory with required size
and alignments. The mapped pfns at page table levels are derived from a
real pfn representing a valid kernel text symbol. This test gets called
via late_initcall().
This test gets built and run when CONFIG_DEBUG_VM_PGTABLE is selected.
Any architecture, which is willing to subscribe this test will need to
select ARCH_HAS_DEBUG_VM_PGTABLE. For now this is limited to arc, arm64,
x86, s390 and powerpc platforms where the test is known to build and run
successfully Going forward, other architectures too can subscribe the test
after fixing any build or runtime problems with their page table helpers.
Folks interested in making sure that a given platform's page table helpers
conform to expected generic MM semantics should enable the above config
which will just trigger this test during boot. Any non conformity here
will be reported as an warning which would need to be fixed. This test
will help catch any changes to the agreed upon semantics expected from
generic MM and enable platforms to accommodate it thereafter.
[anshuman.khandual@arm.com: v17]
Link: http://lkml.kernel.org/r/1587436495-22033-3-git-send-email-anshuman.khandual@arm.com
[anshuman.khandual@arm.com: v18]
Link: http://lkml.kernel.org/r/1588564865-31160-3-git-send-email-anshuman.khandual@arm.com
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> [ppc32]
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Link: http://lkml.kernel.org/r/1583919272-24178-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Updates and bug fixes for secure guest support
- Other minor bug fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJe1ZJVAAoJEJ2a6ncsY3GfbAkH/Ai18+o6+ZPXIBwr/39sMAHi
cdyJDDYPQgATJ1Aie25um/cCCvGtx5PLQS6gVq8uoKb/zefrOUsEgG45muqGy1aI
3EJXkAl1636f154Q9iZWPAr4ZG+dUiVTp/ACZcw1uAJLnnXrTHZtL4H+tvFplT7m
1sBF6Mepha5B3oJyBDgPDpyfafsrzVeF+SpyywHhHR71DGYcGDwWWRliXxyfSPzh
yrnOuS6LVScjDHfKrdPYptaFiPUfJiPLbVCh/APxx9oXXlnSHQ+MfgrJisL4OSUa
4AQdTJKbEZUlkzf62xwXb2HmtDzyt2qD5A/NTr6cAZDsbdEVRr81mkI3iUim+rM=
=1OTR
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-next-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
PPC KVM update for 5.8
- Updates and bug fixes for secure guest support
- Other minor bug fixes and cleanups.
Merge more updates from Andrew Morton:
"More mm/ work, plenty more to come
Subsystems affected by this patch series: slub, memcg, gup, kasan,
pagealloc, hugetlb, vmscan, tools, mempolicy, memblock, hugetlbfs,
thp, mmap, kconfig"
* akpm: (131 commits)
arm64: mm: use ARCH_HAS_DEBUG_WX instead of arch defined
x86: mm: use ARCH_HAS_DEBUG_WX instead of arch defined
riscv: support DEBUG_WX
mm: add DEBUG_WX support
drivers/base/memory.c: cache memory blocks in xarray to accelerate lookup
mm/thp: rename pmd_mknotpresent() as pmd_mkinvalid()
powerpc/mm: drop platform defined pmd_mknotpresent()
mm: thp: don't need to drain lru cache when splitting and mlocking THP
hugetlbfs: get unmapped area below TASK_UNMAPPED_BASE for hugetlbfs
sparc32: register memory occupied by kernel as memblock.memory
include/linux/memblock.h: fix minor typo and unclear comment
mm, mempolicy: fix up gup usage in lookup_node
tools/vm/page_owner_sort.c: filter out unneeded line
mm: swap: memcg: fix memcg stats for huge pages
mm: swap: fix vmstats for huge pages
mm: vmscan: limit the range of LRU type balancing
mm: vmscan: reclaim writepage is IO cost
mm: vmscan: determine anon/file pressure balance at the reclaim root
mm: balance LRU lists based on relative thrashing
mm: only count actual rotations as LRU reclaim cost
...
Patch series "mm/thp: Rename pmd_mknotpresent() as pmd_mknotvalid()", v2.
This series renames pmd_mknotpresent() as pmd_mknotvalid(). Before that
it drops an existing pmd_mknotpresent() definition from powerpc platform
which was never required as it defines it's pmdp_invalidate() through
subscribing __HAVE_ARCH_PMDP_INVALIDATE. This does not create any
functional change.
This rename was suggested by Catalin during a previous discussion while we
were trying to change the THP helpers on arm64 platform for migration.
https://patchwork.kernel.org/patch/11019637/
This patch (of 2):
Platform needs to define pmd_mknotpresent() for generic pmdp_invalidate()
only when __HAVE_ARCH_PMDP_INVALIDATE is not subscribed. Otherwise
platform specific pmd_mknotpresent() is not required. Hence just drop it.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1587520326-10099-1-git-send-email-anshuman.khandual@arm.com
Link: http://lkml.kernel.org/r/1584680057-13753-1-git-send-email-anshuman.khandual@arm.com
Link: http://lkml.kernel.org/r/1584680057-13753-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are multiple similar definitions for arch_clear_hugepage_flags() on
various platforms. Lets just add it's generic fallback definition for
platforms that do not override. This help reduce code duplication.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1588907271-11920-4-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are multiple similar definitions for is_hugepage_only_range() on
various platforms. Lets just add it's generic fallback definition for
platforms that do not override. This help reduce code duplication.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1588907271-11920-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
hugetlb_add_hstate() prints a warning if the hstate already exists. This
was originally done as part of kernel command line parsing. If
'hugepagesz=' was specified more than once, the warning
pr_warn("hugepagesz= specified twice, ignoring\n");
would be printed.
Some architectures want to enable all huge page sizes. They would call
hugetlb_add_hstate for all supported sizes. However, this was done after
command line processing and as a result hstates could have already been
created for some sizes. To make sure no warning were printed, there would
often be code like:
if (!size_to_hstate(size)
hugetlb_add_hstate(ilog2(size) - PAGE_SHIFT)
The only time we want to print the warning is as the result of command
line processing. So, remove the warning from hugetlb_add_hstate and add
it to the single arch independent routine processing "hugepagesz=". After
this, calls to size_to_hstate() in arch specific code can be removed and
hugetlb_add_hstate can be called without worrying about warning messages.
[mike.kravetz@oracle.com: fix hugetlb initialization]
Link: http://lkml.kernel.org/r/4c36c6ce-3774-78fa-abc4-b7346bf24348@oracle.com
Link: http://lkml.kernel.org/r/20200428205614.246260-5-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Mina Almasry <almasrymina@google.com>
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
Acked-by: Will Deacon <will@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Longpeng <longpeng2@huawei.com>
Cc: Nitesh Narayan Lal <nitesh@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20200417185049.275845-4-mike.kravetz@oracle.com
Link: http://lkml.kernel.org/r/20200428205614.246260-4-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that architectures provide arch_hugetlb_valid_size(), parsing of
"hugepagesz=" can be done in architecture independent code. Create a
single routine to handle hugepagesz= parsing and remove all arch specific
routines. We can also remove the interface hugetlb_bad_size() as this is
no longer used outside arch independent code.
This also provides consistent behavior of hugetlbfs command line options.
The hugepagesz= option should only be specified once for a specific size,
but some architectures allow multiple instances. This appears to be more
of an oversight when code was added by some architectures to set up ALL
huge pages sizes.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Sandipan Das <sandipan@linux.ibm.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Mina Almasry <almasrymina@google.com>
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
Acked-by: Will Deacon <will@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Longpeng <longpeng2@huawei.com>
Cc: Nitesh Narayan Lal <nitesh@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20200417185049.275845-3-mike.kravetz@oracle.com
Link: http://lkml.kernel.org/r/20200428205614.246260-3-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Clean up hugetlb boot command line processing", v4.
Longpeng(Mike) reported a weird message from hugetlb command line
processing and proposed a solution [1]. While the proposed patch does
address the specific issue, there are other related issues in command line
processing. As hugetlbfs evolved, updates to command line processing have
been made to meet immediate needs and not necessarily in a coordinated
manner. The result is that some processing is done in arch specific code,
some is done in arch independent code and coordination is problematic.
Semantics can vary between architectures.
The patch series does the following:
- Define arch specific arch_hugetlb_valid_size routine used to validate
passed huge page sizes.
- Move hugepagesz= command line parsing out of arch specific code and into
an arch independent routine.
- Clean up command line processing to follow desired semantics and
document those semantics.
[1] https://lore.kernel.org/linux-mm/20200305033014.1152-1-longpeng2@huawei.com
This patch (of 3):
The architecture independent routine hugetlb_default_setup sets up the
default huge pages size. It has no way to verify if the passed value is
valid, so it accepts it and attempts to validate at a later time. This
requires undocumented cooperation between the arch specific and arch
independent code.
For architectures that support more than one huge page size, provide a
routine arch_hugetlb_valid_size to validate a huge page size.
hugetlb_default_setup can use this to validate passed values.
arch_hugetlb_valid_size will also be used in a subsequent patch to move
processing of the "hugepagesz=" in arch specific code to a common routine
in arch independent code.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Longpeng <longpeng2@huawei.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Nitesh Narayan Lal <nitesh@redhat.com>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20200428205614.246260-1-mike.kravetz@oracle.com
Link: http://lkml.kernel.org/r/20200428205614.246260-2-mike.kravetz@oracle.com
Link: http://lkml.kernel.org/r/20200417185049.275845-1-mike.kravetz@oracle.com
Link: http://lkml.kernel.org/r/20200417185049.275845-2-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The memmap_init() function was made to iterate over memblock regions and
as the result the early_pfn_in_nid() function became obsolete. Since
CONFIG_NODES_SPAN_OTHER_NODES is only used to pick a stub or a real
implementation of early_pfn_in_nid(), it is also not needed anymore.
Remove both early_pfn_in_nid() and the CONFIG_NODES_SPAN_OTHER_NODES.
Co-developed-by: Hoan Tran <Hoan@os.amperecomputing.com>
Signed-off-by: Hoan Tran <Hoan@os.amperecomputing.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64]
Cc: Baoquan He <bhe@redhat.com>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200412194859.12663-17-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
free_area_init() has effectively became a wrapper for
free_area_init_nodes() and there is no point of keeping it. Still
free_area_init() name is shorter and more general as it does not imply
necessity to initialize multiple nodes.
Rename free_area_init_nodes() to free_area_init(), update the callers and
drop old version of free_area_init().
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64]
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200412194859.12663-6-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CONFIG_HAVE_MEMBLOCK_NODE_MAP is used to differentiate initialization of
nodes and zones structures between the systems that have region to node
mapping in memblock and those that don't.
Currently all the NUMA architectures enable this option and for the
non-NUMA systems we can presume that all the memory belongs to node 0 and
therefore the compile time configuration option is not required.
The remaining few architectures that use DISCONTIGMEM without NUMA are
easily updated to use memblock_add_node() instead of memblock_add() and
thus have proper correspondence of memblock regions to NUMA nodes.
Still, free_area_init_node() must have a backward compatible version
because its semantics with and without CONFIG_HAVE_MEMBLOCK_NODE_MAP is
different. Once all the architectures will use the new semantics, the
entire compatibility layer can be dropped.
To avoid addition of extra run time memory to store node id for
architectures that keep memblock but have only a single node, the node id
field of the memblock_region is guarded by CONFIG_NEED_MULTIPLE_NODES and
the corresponding accessors presume that in those cases it is always 0.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64]
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Cc: Baoquan He <bhe@redhat.com>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200412194859.12663-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Move the arch-specific code into arch/arm64/kvm
- Start the post-32bit cleanup
- Cherry-pick a few non-invasive pre-NV patches
x86:
- Rework of TLB flushing
- Rework of event injection, especially with respect to nested virtualization
- Nested AMD event injection facelift, building on the rework of generic code
and fixing a lot of corner cases
- Nested AMD live migration support
- Optimization for TSC deadline MSR writes and IPIs
- Various cleanups
- Asynchronous page fault cleanups (from tglx, common topic branch with tip tree)
- Interrupt-based delivery of asynchronous "page ready" events (host side)
- Hyper-V MSRs and hypercalls for guest debugging
- VMX preemption timer fixes
s390:
- Cleanups
Generic:
- switch vCPU thread wakeup from swait to rcuwait
The other architectures, and the guest side of the asynchronous page fault
work, will come next week.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl7VJcYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPf6QgAq4wU5wdd1lTGz/i3DIhNVJNJgJlp
ozLzRdMaJbdbn5RpAK6PEBd9+pt3+UlojpFB3gpJh2Nazv2OzV4yLQgXXXyyMEx1
5Hg7b4UCJYDrbkCiegNRv7f/4FWDkQ9dx++RZITIbxeskBBCEI+I7GnmZhGWzuC4
7kj4ytuKAySF2OEJu0VQF6u0CvrNYfYbQIRKBXjtOwuRK4Q6L63FGMJpYo159MBQ
asg3B1jB5TcuGZ9zrjL5LkuzaP4qZZHIRs+4kZsH9I6MODHGUxKonrkablfKxyKy
CFK+iaHCuEXXty5K0VmWM3nrTfvpEjVjbMc7e1QGBQ5oXsDM0pqn84syRg==
=v7Wn
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Move the arch-specific code into arch/arm64/kvm
- Start the post-32bit cleanup
- Cherry-pick a few non-invasive pre-NV patches
x86:
- Rework of TLB flushing
- Rework of event injection, especially with respect to nested
virtualization
- Nested AMD event injection facelift, building on the rework of
generic code and fixing a lot of corner cases
- Nested AMD live migration support
- Optimization for TSC deadline MSR writes and IPIs
- Various cleanups
- Asynchronous page fault cleanups (from tglx, common topic branch
with tip tree)
- Interrupt-based delivery of asynchronous "page ready" events (host
side)
- Hyper-V MSRs and hypercalls for guest debugging
- VMX preemption timer fixes
s390:
- Cleanups
Generic:
- switch vCPU thread wakeup from swait to rcuwait
The other architectures, and the guest side of the asynchronous page
fault work, will come next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (256 commits)
KVM: selftests: fix rdtsc() for vmx_tsc_adjust_test
KVM: check userspace_addr for all memslots
KVM: selftests: update hyperv_cpuid with SynDBG tests
x86/kvm/hyper-v: Add support for synthetic debugger via hypercalls
x86/kvm/hyper-v: enable hypercalls regardless of hypercall page
x86/kvm/hyper-v: Add support for synthetic debugger interface
x86/hyper-v: Add synthetic debugger definitions
KVM: selftests: VMX preemption timer migration test
KVM: nVMX: Fix VMX preemption timer migration
x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit
KVM: x86/pmu: Support full width counting
KVM: x86/pmu: Tweak kvm_pmu_get_msr to pass 'struct msr_data' in
KVM: x86: announce KVM_FEATURE_ASYNC_PF_INT
KVM: x86: acknowledgment mechanism for async pf page ready notifications
KVM: x86: interrupt based APF 'page ready' event delivery
KVM: introduce kvm_read_guest_offset_cached()
KVM: rename kvm_arch_can_inject_async_page_present() to kvm_arch_can_dequeue_async_page_present()
KVM: x86: extend struct kvm_vcpu_pv_apf_data with token info
Revert "KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously"
KVM: VMX: Replace zero-length array with flexible-array
...
- Optimize the task wakeup CPU selection logic, to improve scalability and
reduce wakeup latency spikes
- PELT enhancements
- CFS bandwidth handling fixes
- Optimize the wakeup path by remove rq->wake_list and replacing it with ->ttwu_pending
- Optimize IPI cross-calls by making flush_smp_call_function_queue()
process sync callbacks first.
- Misc fixes and enhancements.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=C2OP
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The changes in this cycle are:
- Optimize the task wakeup CPU selection logic, to improve
scalability and reduce wakeup latency spikes
- PELT enhancements
- CFS bandwidth handling fixes
- Optimize the wakeup path by remove rq->wake_list and replacing it
with ->ttwu_pending
- Optimize IPI cross-calls by making flush_smp_call_function_queue()
process sync callbacks first.
- Misc fixes and enhancements"
* tag 'sched-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
irq_work: Define irq_work_single() on !CONFIG_IRQ_WORK too
sched/headers: Split out open-coded prototypes into kernel/sched/smp.h
sched: Replace rq::wake_list
sched: Add rq::ttwu_pending
irq_work, smp: Allow irq_work on call_single_queue
smp: Optimize send_call_function_single_ipi()
smp: Move irq_work_run() out of flush_smp_call_function_queue()
smp: Optimize flush_smp_call_function_queue()
sched: Fix smp_call_function_single_async() usage for ILB
sched/core: Offload wakee task activation if it the wakee is descheduling
sched/core: Optimize ttwu() spinning on p->on_cpu
sched: Defend cfs and rt bandwidth quota against overflow
sched/cpuacct: Fix charge cpuacct.usage_sys
sched/fair: Replace zero-length array with flexible-array
sched/pelt: Sync util/runnable_sum with PELT window when propagating
sched/cpuacct: Use __this_cpu_add() instead of this_cpu_ptr()
sched/fair: Optimize enqueue_task_fair()
sched: Make scheduler_ipi inline
sched: Clean up scheduler_ipi()
sched/core: Simplify sched_init()
...
Merge one more commit from the topic branch we shared with the kvm-ppc
tree.
This brings in a fix to the code that scans for dirty pages during
migration of a VM, which was incorrectly triggering a warning.
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl7VPc4QHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpgQkEACnQlzWOfNQMz1AzgUAv/S8IYDJCLrkbjLZ
JK4pJv8Hjhss/7sS+fd8kyKe9VtaZz2IjmrXcC66RMMwtpx4iHnkRffoNAgEdGOl
/M5TCZGhs+F/mp3Lc0WdR5DFHkM6yy2Tkk9wCFLreB4bW67janAWnd7nbU4INqJj
+WqIgpzNMc/kfUhpBYTeQLORhL4e2TG9ADTi/zeUITlpnEsA65LOgXKEpeIFYnSX
KTl4GIZ9tjazG3Y1Eva7DYHDIErNNAtX67KBqf+WBgMV98eB0O6xIPN1WlmhDTqj
FGMLkb8msH1HHntvxDAuc4/ortnUy8vPI4o6zKP89HJJNjIM5p5eHEuVF5JnBw42
Rtu9Om6JqWx51nhAhJNBj9bUStYbhEl0vVQCwbkfPbDJhzTy3RR8z709q9+ZwOrL
xbp4aJBzqrzscjBEiSQbNCf2PyuOAdU0r1x81UN81ZN41d5qUcumcinjw4Y7vru8
z5zMlo1Iy/AWQYyu7jgHmnpI7ZyA/1Qclo5dV7aa72bLFaJa35e7QxgfQOFBA5dY
UZl6QPJRlnB80uGRzD5jCh2O2sQ3XZqYnpaKsUAka1GgbceCp9IC4A5mfZvpACsh
Xk8VXjlhvY/iPJsKLqrh4Oedg4Dj5M3PLL9C3MDfYeIP2qgXpbnk87UV1TPNSpY0
QcTxsXXXIw==
=H+/Z
-----END PGP SIGNATURE-----
Merge tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"On top of the core changes, here are the block driver changes for this
merge window:
- NVMe changes:
- NVMe over Fibre Channel protocol updates, which also reach
over to drivers/scsi/lpfc (James Smart)
- namespace revalidation support on the target (Anthony
Iliopoulos)
- gcc zero length array fix (Arnd Bergmann)
- nvmet cleanups (Chaitanya Kulkarni)
- misc cleanups and fixes (me, Keith Busch, Sagi Grimberg)
- use a SRQ per completion vector (Max Gurtovoy)
- fix handling of runtime changes to the queue count (Weiping
Zhang)
- t10 protection information support for nvme-rdma and
nvmet-rdma (Israel Rukshin and Max Gurtovoy)
- target side AEN improvements (Chaitanya Kulkarni)
- various fixes and minor improvements all over, icluding the
nvme part of the lpfc driver"
- Floppy code cleanup series (Willy, Denis)
- Floppy contention fix (Jiri)
- Loop CONFIGURE support (Martijn)
- bcache fixes/improvements (Coly, Joe, Colin)
- q->queuedata cleanups (Christoph)
- Get rid of ioctl_by_bdev (Christoph, Stefan)
- md/raid5 allocation fixes (Coly)
- zero length array fixes (Gustavo)
- swim3 task state fix (Xu)"
* tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-block: (166 commits)
bcache: configure the asynchronous registertion to be experimental
bcache: asynchronous devices registration
bcache: fix refcount underflow in bcache_device_free()
bcache: Convert pr_<level> uses to a more typical style
bcache: remove redundant variables i and n
lpfc: Fix return value in __lpfc_nvme_ls_abort
lpfc: fix axchg pointer reference after free and double frees
lpfc: Fix pointer checks and comments in LS receive refactoring
nvme: set dma alignment to qword
nvmet: cleanups the loop in nvmet_async_events_process
nvmet: fix memory leak when removing namespaces and controllers concurrently
nvmet-rdma: add metadata/T10-PI support
nvmet: add metadata support for block devices
nvmet: add metadata/T10-PI support
nvme: add Metadata Capabilities enumerations
nvmet: rename nvmet_check_data_len to nvmet_check_transfer_len
nvmet: rename nvmet_rw_len to nvmet_rw_data_len
nvmet: add metadata characteristics for a namespace
nvme-rdma: add metadata/T10-PI support
nvme-rdma: introduce nvme_rdma_sgl structure
...
Merge updates from Andrew Morton:
"A few little subsystems and a start of a lot of MM patches.
Subsystems affected by this patch series: squashfs, ocfs2, parisc,
vfs. With mm subsystems: slab-generic, slub, debug, pagecache, gup,
swap, memcg, pagemap, memory-failure, vmalloc, kasan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits)
kasan: move kasan_report() into report.c
mm/mm_init.c: report kasan-tag information stored in page->flags
ubsan: entirely disable alignment checks under UBSAN_TRAP
kasan: fix clang compilation warning due to stack protector
x86/mm: remove vmalloc faulting
mm: remove vmalloc_sync_(un)mappings()
x86/mm/32: implement arch_sync_kernel_mappings()
x86/mm/64: implement arch_sync_kernel_mappings()
mm/ioremap: track which page-table levels were modified
mm/vmalloc: track which page-table levels were modified
mm: add functions to track page directory modifications
s390: use __vmalloc_node in stack_alloc
powerpc: use __vmalloc_node in alloc_vm_stack
arm64: use __vmalloc_node in arch_alloc_vmap_stack
mm: remove vmalloc_user_node_flags
mm: switch the test_vmalloc module to use __vmalloc_node
mm: remove __vmalloc_node_flags_caller
mm: remove both instances of __vmalloc_node_flags
mm: remove the prot argument to __vmalloc_node
mm: remove the pgprot argument to __vmalloc
...
These helpers are only used for remapping the ISA I/O base. Replace the
mapping side with a remap_isa_range helper in isa-bridge.c that hard codes
all the known arguments, and just remove __iounmap_at in favour of open
coding it in the only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200414131348.444715-8-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Factor code shared between pci_64 and electra_cf into a ioremap_pbh helper
that follows the normal ioremap semantics, and returns a useful __iomem
pointer. Note that it opencodes __ioremap_at as we know from the callers
the slab is available. Switch pci_64 to also store the result as __iomem
pointer, and unmap the result using iounmap instead of force casting and
using vmalloc APIs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200414131348.444715-7-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The vio and ibmebus buses are used for pseries specific
paravirtualised devices and currently they're initialised by the
generic initcall types. This is mostly fine, but it can result in some
nuisance errors in dmesg when booting on PowerNV on some OSes, e.g.
[ 2.984439] synth uevent: /devices/vio: failed to send uevent
[ 2.984442] vio vio: uevent: failed to send synthetic uevent
[ 17.968551] synth uevent: /devices/vio: failed to send uevent
[ 17.968554] vio vio: uevent: failed to send synthetic uevent
We don't see anything similar for the ibmebus because that depends on
!CONFIG_LITTLE_ENDIAN.
This patch squashes those by switching to using machine_*_initcall()
so the bus type is only registered when the kernel is running on a
pseries machine.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200421081539.7485-1-oohall@gmail.com
PVR value of 0x0F000006 means we are arch v3.1 compliant (i.e.
POWER10). This is used by phyp and kvm when booting as a pseries guest
to detect the presence of new P10 features and to enable the
appropriate hwcap and facility bits.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[mpe: Fall through to __init_FSCR rather than duplicating it, drop
hack to set current->thread.fscr now that is handled elsewhere.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200521014341.29095-8-alistair@popple.id.au
Matrix multiple assist (MMA) is a new feature added to ISAv3.1 and
POWER10. Support on powernv can be selected via a firmware CPU device
tree feature which enables it via a PCR bit.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200521014341.29095-7-alistair@popple.id.au
Prefix instructions have their own FSCR bit which needs to be enabled
via a CPU feature. The kernel will save the FSCR for problem state but
it needs to be enabled initially.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200521014341.29095-6-alistair@popple.id.au
On powernv hardware support for ISAv3.1 is advertised via a cpu feature
bit in the device tree. This patch enables the associated HWCAP bit if
the device tree indicates ISAv3.1 is available.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200521014341.29095-4-alistair@popple.id.au
Newer ISA versions are enabled by clearing all bits in the PCR
associated with previous versions of the ISA. Enable ISA v3.1 support
by updating the PCR mask to include ISA v3.0. This ensures all PCR
bits corresponding to earlier architecture versions get cleared
thereby enabling ISA v3.1 if supported by the hardware.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200521014341.29095-3-alistair@popple.id.au
POWER10 introduces two new architectural features - ISAv3.1 and matrix
multiply assist (MMA) instructions. Userspace detects the presence
of these features via two HWCAP bits introduced in this patch. These
bits have been agreed to by the compiler and binutils team.
According to ISAv3.1 MMA is an optional feature and software that makes
use of it should first check for availability via this HWCAP bit and use
alternate code paths if unavailable.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Tested-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200521014341.29095-2-alistair@popple.id.au
Since the previous commit that saves the value of FSCR configured at
boot into init_task.thread.fscr, the static initialisation in
INIT_THREAD now no longer has any effect.
So remove it.
For non DT CPU features, the end result is the same, because
__init_FSCR() is called on all CPUs that have an FSCR (Power8,
Power9), and it sets FSCR_TAR & FSCR_EBB.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200527145843.2761782-4-mpe@ellerman.id.au
At boot the FSCR is initialised via one of two paths. On most systems
it's set to a hard coded value in __init_FSCR().
On newer skiboot systems we use the device tree CPU features binding,
where firmware can tell Linux what bits to set in FSCR (and HFSCR).
In both cases the value that's configured at boot is not propagated
into the init_task.thread.fscr value prior to the initial fork of init
(pid 1), which means the value is not used by any processes other than
swapper (the idle task).
For the __init_FSCR() case this is OK, because the value in
init_task.thread.fscr is initialised to something sensible. However it
does mean that the value set in __init_FSCR() is not used other than
for swapper, which is odd and confusing.
The bigger problem is for the device tree CPU features case it
prevents firmware from setting (or clearing) FSCR bits for use by user
space. This means all existing kernels can not have features
enabled/disabled by firmware if those features require
setting/clearing FSCR bits.
We can handle both cases by saving the FSCR value into
init_task.thread.fscr after we have initialised it at boot. This fixes
the bug for device tree CPU features, and will allow us to simplify
the initialisation for the __init_FSCR() case in a future patch.
Fixes: 5a61ef74f2 ("powerpc/64s: Support new device tree binding for discovering CPU features")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200527145843.2761782-3-mpe@ellerman.id.au
The device tree CPU features binding includes FSCR bit numbers which
Linux is instructed to set by firmware.
Whether that's a good idea or not, in the case of the DSCR the Linux
implementation has a hard requirement that the FSCR_DSCR bit not be
set by default. We use it to track when a process reads/writes to
DSCR, so it must be clear to begin with.
So if firmware tells us to set FSCR_DSCR we must ignore it.
Currently this does not cause a bug in our DSCR handling because the
value of FSCR that the device tree CPU features code establishes is
only used by swapper. All other tasks use the value hard coded in
init_task.thread.fscr.
However we'd like to fix that in a future commit, at which point this
will become necessary.
Fixes: 5a61ef74f2 ("powerpc/64s: Support new device tree binding for discovering CPU features")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200527145843.2761782-2-mpe@ellerman.id.au
__init_FSCR() was added originally in commit 2468dcf641 ("powerpc:
Add support for context switching the TAR register") (Feb 2013), and
only set FSCR_TAR.
At that point FSCR (Facility Status and Control Register) was not
context switched, so the setting was permanent after boot.
Later we added initialisation of FSCR_DSCR to __init_FSCR(), in commit
54c9b2253d ("powerpc: Set DSCR bit in FSCR setup") (Mar 2013), again
that was permanent after boot.
Then commit 2517617e0d ("powerpc: Fix context switch DSCR on
POWER8") (Aug 2013) added a limited context switch of FSCR, just the
FSCR_DSCR bit was context switched based on thread.dscr_inherit. That
commit said "This clears the H/FSCR DSCR bit initially", but it
didn't, it left the initialisation of FSCR_DSCR in __init_FSCR().
However the initial context switch from init_task to pid 1 would clear
FSCR_DSCR because thread.dscr_inherit was 0.
That commit also introduced the requirement that FSCR_DSCR be clear
for user processes, so that we can take the facility unavailable
interrupt in order to manage dscr_inherit.
Then in commit 152d523e63 ("powerpc: Create context switch helpers
save_sprs() and restore_sprs()") (Dec 2015) FSCR was added to
thread_struct. However it still wasn't fully context switched, we just
took the existing value and set FSCR_DSCR if the new thread had
dscr_inherit set. FSCR was still initialised at boot to FSCR_DSCR |
FSCR_TAR, but that value was not propagated into the thread_struct, so
the initial context switch set FSCR_DSCR back to 0.
Finally commit b57bd2de8c ("powerpc: Improve FSCR init and context
switching") (Jun 2016) added a full context switch of the FSCR, and
added an initialisation of init_task.thread.fscr to FSCR_TAR |
FSCR_EBB, but omitted FSCR_DSCR.
The end result is that swapper runs with FSCR_DSCR set because of the
initialisation in __init_FSCR(), but no other processes do, they use
the value from init_task.thread.fscr.
Having FSCR_DSCR set for swapper allows it to access SPR 3 from
userspace, but swapper never runs userspace, so it has no useful
effect. It's also confusing to have the value initialised in two
places to two different values.
So remove FSCR_DSCR from __init_FSCR(), this at least gets us to the
point where there's a single value of FSCR, even if it's still set in
two places.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200527145843.2761782-1-mpe@ellerman.id.au
Since commit c55d7b5e64 ("powerpc: Remove STRICT_KERNEL_RWX
incompatibility with RELOCATABLE"), powerpc kernels with
-mprofile-kernel can crash in certain scenarios with a trace like below:
BUG: Unable to handle kernel instruction fetch (NULL pointer?)
Faulting instruction address: 0x00000000
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=256 DEBUG_PAGEALLOC NUMA PowerNV
<snip>
NIP [0000000000000000] 0x0
LR [c0080000102c0048] ext4_iomap_end+0x8/0x30 [ext4]
Call Trace:
iomap_apply+0x20c/0x920 (unreliable)
iomap_bmap+0xfc/0x160
ext4_bmap+0xa4/0x180 [ext4]
bmap+0x4c/0x80
jbd2_journal_init_inode+0x44/0x1a0 [jbd2]
ext4_load_journal+0x440/0x860 [ext4]
ext4_fill_super+0x342c/0x3ab0 [ext4]
mount_bdev+0x25c/0x290
ext4_mount+0x28/0x50 [ext4]
legacy_get_tree+0x4c/0xb0
vfs_get_tree+0x4c/0x130
do_mount+0xa18/0xc50
sys_mount+0x158/0x180
system_call+0x5c/0x68
The NIP points to NULL, or a random location (data even), while the LR
always points to the LEP of a function (with an offset of 8), indicating
that something went wrong with ftrace. However, ftrace is not
necessarily active when such crashes occur.
The kernel OOPS sometimes follows a warning from ftrace indicating that
some module functions could not be patched with a nop. Other times, if a
module is loaded early during boot, instruction patching can fail due to
a separate bug, but the error is not reported due to missing error
reporting.
In all the above cases when instruction patching fails, ftrace will be
disabled but certain kernel module functions will be left with default
calls to _mcount(). This is not a problem with ELFv1. However, with
-mprofile-kernel, the default stub is problematic since it depends on a
valid module TOC in r2. If the kernel (or a different module) calls into
a function that does not use the TOC, the function won't have a prologue
to setup the module TOC. When that function calls into _mcount(), we
will end up in the relocation stub that will use the previous TOC, and
end up trying to jump into a random location. From the above trace:
iomap_apply+0x20c/0x920 [kernel TOC]
|
V
ext4_iomap_end+0x8/0x30 [no GEP == kernel TOC]
|
V
_mcount() stub
[uses kernel TOC -> random entry]
To address this, let's change over to using the special stub that is
used for ftrace_[regs_]caller() for _mcount(). This ensures that we are
not dependent on a valid module TOC in r2 for default _mcount()
handling.
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8affd4298d22099bbd82544fab8185700a6222b1.1587488954.git.naveen.n.rao@linux.vnet.ibm.com
For -mprofile-kernel, we need special handling when generating stubs for
ftrace calls such as _mcount(). To faciliate this, we check if a
R_PPC64_REL24 relocation is for a symbol named "_mcount()" along with
also checking the instruction sequence. The latter is not really
required since "_mcount()" is an exported symbol and kernel modules
cannot use it. As such, drop the additional checking and simplify the
code. This helps unify stub creation for ftrace stubs with
-mprofile-kernel and aids in code reuse.
Also rename is_mprofile_mcount_callsite() to is_mprofile_ftrace_call()
to reflect the checking being done.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7d9c316adfa1fb787ad268bb4691e7e4059ff2d5.1587488954.git.naveen.n.rao@linux.vnet.ibm.com
module_trampoline_target() is only used by ftrace. Move the prototype
within the appropriate #ifdef in the header. Also, move the function
body to the end of module_64.c so as to consolidate all ftrace code in
one place.
No functional changes.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2527351f65c53c5866068ae130dc34c5d4ee8ad9.1587488954.git.naveen.n.rao@linux.vnet.ibm.com
Mapping of early shadow area is implemented by using a single static
page table having all entries pointing to the same early shadow page.
The shadow area must therefore occupy full PGD entries.
The shadow area has a size of 128MB starting at 0xf8000000.
With 4k pages, a PGD entry is 4MB
With 16k pages, a PGD entry is 64MB
With 64k pages, a PGD entry is 1GB which is too big.
Until we rework the early shadow mapping, disable KASAN when the page
size is too big.
Fixes: 2edb16efc8 ("powerpc/32: Add KASAN support")
Cc: stable@vger.kernel.org # v5.2+
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7195fcde7314ccbf7a081b356084a69d421b10d4.1590660977.git.christophe.leroy@csgroup.eu
On book3s/32, KUEP is an heavy process as it requires to
set/unset the NX bit in each of the 12 user segments
everytime the kernel is entered/exited from/to user space.
Don't select KUEP by default on book3s/32.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1492bb150c1aaa53d99a604b49992e60ea20cd5f.1586962582.git.christophe.leroy@c-s.fr
On book3s/32, KUAP is an heavy process as it requires to
determine which segments are impacted and unlock/lock
each of them.
And since the implementation of user_access_begin/end, it
is even worth for the time being because unlike __get_user(),
user_access_begin doesn't make difference between read and write
and unlocks access also for read allthought that's unneeded
on book3s/32.
As shown by the size of a kernel built with KUAP and one without,
the overhead is 64k bytes of code. As a comparison a similar
build on an 8xx has an overhead of only 8k bytes of code.
text data bss dec hex filename
7230416 1425868 837376 9493660 90dc9c vmlinux.kuap6xx
7165012 1425548 837376 9427936 8fdbe0 vmlinux.nokuap6xx
6519796 1960028 477464 8957288 88ad68 vmlinux.kuap8xx
6511664 1959864 477464 8948992 888d00 vmlinux.nokuap8xx
Until a more optimised KUAP is implemented on book3s/32,
don't select it by default.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/154a99399317b096ac1f04827b9f8d7a9179ddc1.1586962586.git.christophe.leroy@c-s.fr
To enable/disable kernel access to user space, the 8xx has to
modify the properties of access group 1. This is done by writing
predefined values into SPRN_Mx_AP registers.
As of today, a __put_user() gives:
00000d64 <my_test>:
d64: 3d 20 4f ff lis r9,20479
d68: 61 29 ff ff ori r9,r9,65535
d6c: 7d 3a c3 a6 mtspr 794,r9
d70: 39 20 00 00 li r9,0
d74: 90 83 00 00 stw r4,0(r3)
d78: 3d 20 6f ff lis r9,28671
d7c: 61 29 ff ff ori r9,r9,65535
d80: 7d 3a c3 a6 mtspr 794,r9
d84: 4e 80 00 20 blr
Because only groups 0 and 1 are used, the definition of
groups 2 to 15 doesn't matter.
By setting unused bits to 0 instead on 1, one instruction is
removed for each lock and unlock action:
00000d5c <my_test>:
d5c: 3d 20 40 00 lis r9,16384
d60: 7d 3a c3 a6 mtspr 794,r9
d64: 39 20 00 00 li r9,0
d68: 90 83 00 00 stw r4,0(r3)
d6c: 3d 20 60 00 lis r9,24576
d70: 7d 3a c3 a6 mtspr 794,r9
d74: 4e 80 00 20 blr
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/57425c33dd72f292b1a23570244b81419072a7aa.1586945153.git.christophe.leroy@c-s.fr
kprobe does not handle events happening in real mode.
The very last part of exception exits cannot support a trap.
Blacklist them from kprobe.
While we are at it, remove exc_exit_start symbol which is not
used to avoid having to blacklist it.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/098b0fd3f6299aa1bd692bd576bd7012c84608de.1585670437.git.christophe.leroy@c-s.fr
kprobe does not handle events happening in real mode.
The very last part of syscall cannot support a trap.
Add a symbol syscall_exit_finish to identify that part and
blacklist it from kprobe.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/23eddf49abb03d1359fa0be4206998eb3800f42c.1585670437.git.christophe.leroy@c-s.fr
kprobe does not handle events happening in real mode.
As exception entry points are running with MMU disabled,
blacklist them.
The handling of TLF_NAPPING and TLF_SLEEPING is moved before the
CONFIG_TRACE_IRQFLAGS which contains 'reenable_mmu' because from there
kprobe will be possible as the kernel will run with MMU enabled.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f61ac599855e674ebb592464d0ea32a3ba9c6644.1585670437.git.christophe.leroy@c-s.fr
In hash_low.S, a lot of named local symbols are used instead of
numbers to ease code readability. However, they don't need to be
visible.
In order to ease blacklisting of functions running with MMU
disabled for kprobe, rename the symbols to .Lsymbols in order
to hide them as if they were numbered labels.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/90c430d9e0f7af772a58aaeaf17bcc6321265340.1585670437.git.christophe.leroy@c-s.fr
This gives us OF_PMEM which is useful in mambo.
This adds 153K to the text of ppc64le_defconfig which 0.8% of the
total text.
LIBNVDIMM text data bss dec hex
Without 18574833 5518150 1539240 25632223 1871ddf
With 18727834 5546206 1539368 25813408 189e1a0
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200519043009.3081885-1-mikey@neuling.org
Implement rtas_call_reentrant() for reentrant rtas-calls:
"ibm,int-on", "ibm,int-off",ibm,get-xive" and "ibm,set-xive".
On LoPAPR Version 1.1 (March 24, 2016), from 7.3.10.1 to 7.3.10.4,
items 2 and 3 say:
2 - For the PowerPC External Interrupt option: The * call must be
reentrant to the number of processors on the platform.
3 - For the PowerPC External Interrupt option: The * argument call
buffer for each simultaneous call must be physically unique.
So, these rtas-calls can be called in a lockless way, if using
a different buffer for each cpu doing such rtas call.
For this, it was suggested to add the buffer (struct rtas_args)
in the PACA struct, so each cpu can have it's own buffer.
The PACA struct received a pointer to rtas buffer, which is
allocated in the memory range available to rtas 32-bit.
Reentrant rtas calls are useful to avoid deadlocks in crashing,
where rtas-calls are needed, but some other thread crashed holding
the rtas.lock.
This is a backtrace of a deadlock from a kdump testing environment:
#0 arch_spin_lock
#1 lock_rtas ()
#2 rtas_call (token=8204, nargs=1, nret=1, outputs=0x0)
#3 ics_rtas_mask_real_irq (hw_irq=4100)
#4 machine_kexec_mask_interrupts
#5 default_machine_crash_shutdown
#6 machine_crash_shutdown
#7 __crash_kexec
#8 crash_kexec
#9 oops_end
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
[mpe: Move under #ifdef PSERIES to avoid build breakage]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200518234245.200672-3-leobras.c@gmail.com
In order to get any rtas* struct into other headers, including rtas.h
may cause a lot of errors, regarding include dependency needed for
inline functions.
Create rtas-types.h and move there all type/struct definitions
from rtas.h, then include rtas-types.h into rtas.h.
Also, as suggested by checkpath.pl, replace uint8_t for u8.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200518234245.200672-2-leobras.c@gmail.com
Currently, if printk lock (logbuf_lock) is held by other thread during
crash, there is a chance of deadlocking the crash on next printk, and
blocking a possibly desired kdump.
At the start of default_machine_crash_shutdown, make printk enter
NMI context, as it will use per-cpu buffers to store the message,
and avoid locking logbuf_lock.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200512214533.93878-1-leobras.c@gmail.com
While providing guests, it's desirable to resize it's memory on demand.
By now, it's possible to do so by creating a guest with a small base
memory, hot-plugging all the rest, and using 'movable_node' kernel
command-line parameter, which puts all hot-plugged memory in
ZONE_MOVABLE, allowing it to be removed whenever needed.
But there is an issue regarding guest reboot:
If memory is hot-plugged, and then the guest is rebooted, all hot-plugged
memory goes to ZONE_NORMAL, which offers no guaranteed hot-removal.
It usually prevents this memory to be hot-removed from the guest.
It's possible to use device-tree information to fix that behavior, as
it stores flags for LMB ranges on ibm,dynamic-memory-vN.
It involves marking each memblock with the correct flags as hotpluggable
memory, which mm/memblock.c puts in ZONE_MOVABLE during boot if
'movable_node' is passed.
For carrying such information, the new flag DRCONF_MEM_HOTREMOVABLE was
proposed and accepted into Power Architecture documentation.
This flag should be:
- true (b=1) if the hypervisor may want to hot-remove it later, and
- false (b=0) if it does not care.
During boot, guest kernel reads the device-tree, early_init_drmem_lmb()
is called for every added LMBs. Here, checking for this new flag and
marking memblocks as hotplugable memory is enough to get the desirable
behavior.
This should cause no change if 'movable_node' parameter is not passed
in kernel command-line.
Signed-off-by: Leonardo Bras <leonardo@linux.ibm.com>
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200402195156.626430-1-leonardo@linux.ibm.com
Show the address of the tasks regs in the process listing in xmon. The
regs should always be on the stack page that we also print the address
of, but it's still helpful not to have to find them by hand.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200520111740.953679-1-mpe@ellerman.id.au
This adds the CPU or thread number to printk messages. This helps a
lot when deciphering concurrent oopses that have been interleaved.
Example output, of PID1 (T1) triggering a warning:
[ 1.581678][ T1] WARNING: CPU: 0 PID: 1 at crypto/rsa-pkcs1pad.c:539 pkcs1pad_verify+0x38/0x140
[ 1.581681][ T1] Modules linked in:
[ 1.581693][ T1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc5-gcc-8.2.0-00121-gf84c2e595927-dirty #1515
[ 1.581700][ T1] NIP: c000000000207d64 LR: c000000000207d3c CTR: c000000000207d2c
[ 1.581708][ T1] REGS: c0000000fd2e7560 TRAP: 0700 Not tainted (5.5.0-rc5-gcc-8.2.0-00121-gf84c2e595927-dirty)
[ 1.581712][ T1] MSR: 9000000000029033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 44000222 XER: 00040000
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200520121257.961112-1-mpe@ellerman.id.au
Currently when we boot on a big core system, we get this print:
[ 0.040500] Using small cores at SMT level
This is misleading as we've actually detected big cores.
This patch clears up the print to say we've detect big cores but are
using small cores for scheduling.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200528230731.1235752-1-mikey@neuling.org
If the memory chunk found for reserving memory overshoots the memory
limit imposed, do not proceed with reserving memory. Default behavior
was this until commit 140777a3d8 ("powerpc/fadump: consider reserved
ranges while reserving memory") changed it unwittingly.
Fixes: 140777a3d8 ("powerpc/fadump: consider reserved ranges while reserving memory")
Cc: stable@vger.kernel.org
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159057266320.22331.6571453892066907320.stgit@hbathini.in.ibm.com
'mem=" option is an easy way to put high pressure on memory during
some test. Hence after applying the memory limit, instead of total
mem, the actual usable memory should be considered when reserving mem
for crashkernel. Otherwise the boot up may experience OOM issue.
E.g. it would reserve 4G prior to the change and 512M afterward, if
passing
crashkernel="2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G",
and mem=5G on a 256G machine.
This issue is powerpc specific because it puts higher priority on
fadump and kdump reservation than on "mem=". Referring the following
code:
if (fadump_reserve_mem() == 0)
reserve_crashkernel();
...
/* Ensure that total memory size is page-aligned. */
limit = ALIGN(memory_limit ?: memblock_phys_mem_size(), PAGE_SIZE);
memblock_enforce_memory_limit(limit);
While on other arches, the effect of "mem=" takes a higher priority
and pass through memblock_phys_mem_size() before calling
reserve_crashkernel().
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1585749644-4148-1-git-send-email-kernelfans@gmail.com
kbuild test robot reported some build warnings in the hw_breakpoint
code when compiled with clang[1]. Some of them were introduced by the
recent powerpc change to add arch_reserve_bp_slot() and
arch_release_bp_slot(). Fix them all.
kernel/events/hw_breakpoint.c:71:12: warning: no previous prototype for function 'hw_breakpoint_weight'
kernel/events/hw_breakpoint.c:216:12: warning: no previous prototype for function 'arch_reserve_bp_slot'
kernel/events/hw_breakpoint.c:221:13: warning: no previous prototype for function 'arch_release_bp_slot'
kernel/events/hw_breakpoint.c:228:13: warning: no previous prototype for function 'arch_unregister_hw_breakpoint'
[1]: https://lore.kernel.org/linuxppc-dev/202005192233.oi9CjRtA%25lkp@intel.com/
Fixes: 29da4f91c0 ("powerpc/watchpoint: Don't allow concurrent perf and ptrace events")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
[mpe: Drop extern, flesh out change log, add Fixes tag]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200602041208.128913-1-ravi.bangoria@linux.ibm.com
Pull vfs updates from Al Viro:
"Assorted patches from Miklos.
An interesting part here is /proc/mounts stuff..."
The "/proc/mounts stuff" is using a cursor for keeeping the location
data while traversing the mount listing.
Also probably worth noting is the addition of faccessat2(), which takes
an additional set of flags to specify how the lookup is done
(AT_EACCESS, AT_SYMLINK_NOFOLLOW, AT_EMPTY_PATH).
* 'from-miklos' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: add faccessat2 syscall
vfs: don't parse "silent" option
vfs: don't parse "posixacl" option
vfs: don't parse forbidden flags
statx: add mount_root
statx: add mount ID
statx: don't clear STATX_ATIME on SB_RDONLY
uapi: deprecate STATX_ALL
utimensat: AT_EMPTY_PATH support
vfs: split out access_override_creds()
proc/mounts: add cursor
aio: fix async fsync creds
vfs: allow unprivileged whiteout creation
Pull uaccess/coredump updates from Al Viro:
"set_fs() removal in coredump-related area - mostly Christoph's
stuff..."
* 'work.set_fs-exec' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
binfmt_elf_fdpic: remove the set_fs(KERNEL_DS) in elf_fdpic_core_dump
binfmt_elf: remove the set_fs(KERNEL_DS) in elf_core_dump
binfmt_elf: remove the set_fs in fill_siginfo_note
signal: refactor copy_siginfo_to_user32
powerpc/spufs: simplify spufs core dumping
powerpc/spufs: stop using access_ok
powerpc/spufs: fix copy_to_user while atomic
set from Mauro toward the completion of the RST conversion. I *really*
hope we are getting close to the end of this. Meanwhile, those patches
reach pretty far afield to update document references around the tree;
there should be no actual code changes there. There will be, alas, more of
the usual trivial merge conflicts.
Beyond that we have more translations, improvements to the sphinx
scripting, a number of additions to the sysctl documentation, and lots of
fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl7VId8PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Yq/gH/iaDgirQZV6UZ2v9sfwQNYolNpf2sKAuOZjd
bPFB7WJoMQbKwQEvYrAUL2+5zPOcLYuIfzyOfo1BV1py+EyKbACcKjI4AedxfJF7
+NchmOBhlEqmEhzx2U08HRc4/8J223WG17fJRVsV3p+opJySexSFeQucfOciX5NR
RUCxweWWyg/FgyqjkyMMTtsePqZPmcT5dWTlVXISlbWzcv5NFhuJXnSrw8Sfzcmm
SJMzqItv3O+CabnKQ8kMLV2PozXTMfjeWH47ZUK0Y8/8PP9+cvqwFzZ0UDQJ1Xaz
oyW/TqmunaXhfMsMFeFGSwtfgwRHvXdxkQdtwNHvo1dV4dzTvDw=
=fDC/
-----END PGP SIGNATURE-----
Merge tag 'docs-5.8' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A fair amount of stuff this time around, dominated by yet another
massive set from Mauro toward the completion of the RST conversion. I
*really* hope we are getting close to the end of this. Meanwhile,
those patches reach pretty far afield to update document references
around the tree; there should be no actual code changes there. There
will be, alas, more of the usual trivial merge conflicts.
Beyond that we have more translations, improvements to the sphinx
scripting, a number of additions to the sysctl documentation, and lots
of fixes"
* tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits)
Documentation: fixes to the maintainer-entry-profile template
zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst
tracing: Fix events.rst section numbering
docs: acpi: fix old http link and improve document format
docs: filesystems: add info about efivars content
Documentation: LSM: Correct the basic LSM description
mailmap: change email for Ricardo Ribalda
docs: sysctl/kernel: document unaligned controls
Documentation: admin-guide: update bug-hunting.rst
docs: sysctl/kernel: document ngroups_max
nvdimm: fixes to maintainter-entry-profile
Documentation/features: Correct RISC-V kprobes support entry
Documentation/features: Refresh the arch support status files
Revert "docs: sysctl/kernel: document ngroups_max"
docs: move locking-specific documents to locking/
docs: move digsig docs to the security book
docs: move the kref doc into the core-api book
docs: add IRQ documentation at the core-api book
docs: debugging-via-ohci1394.txt: add it to the core-api book
docs: fix references for ipmi.rst file
...
- Add AMD Fam17h RAPL support
- Introduce CAP_PERFMON to kernel and user space
- Add Zhaoxin CPU support
- Misc fixes and cleanups
Tooling changes:
perf record:
- Introduce --switch-output-event to use arbitrary events to be setup
and read from a side band thread and, when they take place a signal
be sent to the main 'perf record' thread, reusing the --switch-output
code to take perf.data snapshots from the --overwrite ring buffer, e.g.:
# perf record --overwrite -e sched:* \
--switch-output-event syscalls:*connect* \
workload
will take perf.data.YYYYMMDDHHMMSS snapshots up to around the
connect syscalls.
- Add --num-synthesize-threads option to control degree of parallelism of the
synthesize_mmap() code which is scanning /proc/PID/task/PID/maps and can be
time consuming. This mimics pre-existing behaviour in 'perf top'.
perf bench:
- Add a multi-threaded synthesize benchmark.
- Add kallsyms parsing benchmark.
Intel PT support:
- Stitch LBR records from multiple samples to get deeper backtraces,
there are caveats, see the csets for details.
- Allow using Intel PT to synthesize callchains for regular events.
- Add support for synthesizing branch stacks for regular events (cycles,
instructions, etc) from Intel PT data.
Misc changes:
- Updated perf vendor events for power9 and Coresight.
- Add flamegraph.py script via 'perf flamegraph'
- Misc other changes, fixes and cleanups - see the Git log for details.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=i27M
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Add AMD Fam17h RAPL support
- Introduce CAP_PERFMON to kernel and user space
- Add Zhaoxin CPU support
- Misc fixes and cleanups
Tooling changes:
- perf record:
Introduce '--switch-output-event' to use arbitrary events to be
setup and read from a side band thread and, when they take place a
signal be sent to the main 'perf record' thread, reusing the core
for '--switch-output' to take perf.data snapshots from the ring
buffer used for '--overwrite', e.g.:
# perf record --overwrite -e sched:* \
--switch-output-event syscalls:*connect* \
workload
will take perf.data.YYYYMMDDHHMMSS snapshots up to around the
connect syscalls.
Add '--num-synthesize-threads' option to control degree of
parallelism of the synthesize_mmap() code which is scanning
/proc/PID/task/PID/maps and can be time consuming. This mimics
pre-existing behaviour in 'perf top'.
- perf bench:
Add a multi-threaded synthesize benchmark and kallsyms parsing
benchmark.
- Intel PT support:
Stitch LBR records from multiple samples to get deeper backtraces,
there are caveats, see the csets for details.
Allow using Intel PT to synthesize callchains for regular events.
Add support for synthesizing branch stacks for regular events
(cycles, instructions, etc) from Intel PT data.
Misc changes:
- Updated perf vendor events for power9 and Coresight.
- Add flamegraph.py script via 'perf flamegraph'
- Misc other changes, fixes and cleanups - see the Git log for details
Also, since over the last couple of years perf tooling has matured and
decoupled from the kernel perf changes to a large degree, going
forward Arnaldo is going to send perf tooling changes via direct pull
requests"
* tag 'perf-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (163 commits)
perf/x86/rapl: Add AMD Fam17h RAPL support
perf/x86/rapl: Make perf_probe_msr() more robust and flexible
perf/x86/rapl: Flip logic on default events visibility
perf/x86/rapl: Refactor to share the RAPL code between Intel and AMD CPUs
perf/x86/rapl: Move RAPL support to common x86 code
perf/core: Replace zero-length array with flexible-array
perf/x86: Replace zero-length array with flexible-array
perf/x86/intel: Add more available bits for OFFCORE_RESPONSE of Intel Tremont
perf/x86/rapl: Add Ice Lake RAPL support
perf flamegraph: Use /bin/bash for report and record scripts
perf cs-etm: Move definition of 'traceid_list' global variable from header file
libsymbols kallsyms: Move hex2u64 out of header
libsymbols kallsyms: Parse using io api
perf bench: Add kallsyms parsing
perf: cs-etm: Update to build with latest opencsd version.
perf symbol: Fix kernel symbol address display
perf inject: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
perf annotate: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
perf trace: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
perf script: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
...
- RCU-tasks update, including addition of RCU Tasks Trace for
BPF use and TASKS_RUDE_RCU
- kfree_rcu() updates.
- Remove scheduler locking restriction
- RCU CPU stall warning updates.
- Torture-test updates.
- Miscellaneous fixes and other updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Yisx
-----END PGP SIGNATURE-----
Merge tag 'core-rcu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"The RCU updates for this cycle were:
- RCU-tasks update, including addition of RCU Tasks Trace for BPF use
and TASKS_RUDE_RCU
- kfree_rcu() updates.
- Remove scheduler locking restriction
- RCU CPU stall warning updates.
- Torture-test updates.
- Miscellaneous fixes and other updates"
* tag 'core-rcu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
rcu: Allow for smp_call_function() running callbacks from idle
rcu: Provide rcu_irq_exit_check_preempt()
rcu: Abstract out rcu_irq_enter_check_tick() from rcu_nmi_enter()
rcu: Provide __rcu_is_watching()
rcu: Provide rcu_irq_exit_preempt()
rcu: Make RCU IRQ enter/exit functions rely on in_nmi()
rcu/tree: Mark the idle relevant functions noinstr
x86: Replace ist_enter() with nmi_enter()
x86/mce: Send #MC singal from task work
x86/entry: Get rid of ist_begin/end_non_atomic()
sched,rcu,tracing: Avoid tracing before in_nmi() is correct
sh/ftrace: Move arch_ftrace_nmi_{enter,exit} into nmi exception
lockdep: Always inline lockdep_{off,on}()
hardirq/nmi: Allow nested nmi_enter()
arm64: Prepare arch_nmi_enter() for recursion
printk: Disallow instrumenting print_nmi_enter()
printk: Prepare for nested printk_nmi_enter()
rcutorture: Convert ULONG_CMP_LT() to time_before()
torture: Add a --kasan argument
torture: Save a few lines by using config_override_param initially
...
logic, instead of the current per debug facility blacklist, use the more generic
.noinstr.text approach, combined with a 'noinstr' marker for functions.
Also add instrumentation_begin()/end() to better manage the exact place in entry
code where instrumentation may be used.
Also add a kprobes blacklist for modules.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=25Vr
-----END PGP SIGNATURE-----
Merge tag 'core-kprobes-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull kprobes updates from Ingo Molnar:
"Various kprobes updates, mostly centered around cleaning up the
no-instrumentation logic.
Instead of the current per debug facility blacklist, use the more
generic .noinstr.text approach, combined with a 'noinstr' marker for
functions.
Also add instrumentation_begin()/end() to better manage the exact
place in entry code where instrumentation may be used.
And add a kprobes blacklist for modules"
* tag 'core-kprobes-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kprobes: Prevent probes in .noinstr.text section
vmlinux.lds.h: Create section for protection against instrumentation
samples/kprobes: Add __kprobes and NOKPROBE_SYMBOL() for handlers.
kprobes: Support NOKPROBE_SYMBOL() in modules
kprobes: Support __kprobes blacklist in modules
kprobes: Lock kprobe_mutex while showing kprobe_blacklist
- refactor pstore locking for safer module unloading (Kees Cook)
- remove orphaned records from pstorefs when backend unloaded (Kees Cook)
- refactor dump_oops parameter into max_reason (Pavel Tatashin)
- introduce pstore/zone for common code for contiguous storage (WeiXiong Liao)
- introduce pstore/blk for block device backend (WeiXiong Liao)
- introduce mtd backend (WeiXiong Liao)
-----BEGIN PGP SIGNATURE-----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=7s1u
-----END PGP SIGNATURE-----
Merge tag 'pstore-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
"Fixes and new features for pstore.
This is a pretty big set of changes (relative to past pstore pulls),
but it has been in -next for a while. The biggest change here is the
ability to support a block device as a pstore backend, which has been
desired for a while. A lot of additional fixes and refactorings are
also included, mostly in support of the new features.
- refactor pstore locking for safer module unloading (Kees Cook)
- remove orphaned records from pstorefs when backend unloaded (Kees
Cook)
- refactor dump_oops parameter into max_reason (Pavel Tatashin)
- introduce pstore/zone for common code for contiguous storage
(WeiXiong Liao)
- introduce pstore/blk for block device backend (WeiXiong Liao)
- introduce mtd backend (WeiXiong Liao)"
* tag 'pstore-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (35 commits)
mtd: Support kmsg dumper based on pstore/blk
pstore/blk: Introduce "best_effort" mode
pstore/blk: Support non-block storage devices
pstore/blk: Provide way to query pstore configuration
pstore/zone: Provide way to skip "broken" zone for MTD devices
Documentation: Add details for pstore/blk
pstore/zone,blk: Add ftrace frontend support
pstore/zone,blk: Add console frontend support
pstore/zone,blk: Add support for pmsg frontend
pstore/blk: Introduce backend for block devices
pstore/zone: Introduce common layer to manage storage zones
ramoops: Add "max-reason" optional field to ramoops DT node
pstore/ram: Introduce max_reason and convert dump_oops
pstore/platform: Pass max_reason to kmesg dump
printk: Introduce kmsg_dump_reason_str()
printk: honor the max_reason field in kmsg_dumper
printk: Collapse shutdown types into a single dump reason
pstore/ftrace: Provide ftrace log merging routine
pstore/ram: Refactor ftrace buffer merging
pstore/ram: Refactor DT size parsing
...
Pull crypto updates from Herbert Xu:
"API:
- Introduce crypto_shash_tfm_digest() and use it wherever possible.
- Fix use-after-free and race in crypto_spawn_alg.
- Add support for parallel and batch requests to crypto_engine.
Algorithms:
- Update jitter RNG for SP800-90B compliance.
- Always use jitter RNG as seed in drbg.
Drivers:
- Add Arm CryptoCell driver cctrng.
- Add support for SEV-ES to the PSP driver in ccp"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (114 commits)
crypto: hisilicon - fix driver compatibility issue with different versions of devices
crypto: engine - do not requeue in case of fatal error
crypto: cavium/nitrox - Fix a typo in a comment
crypto: hisilicon/qm - change debugfs file name from qm_regs to regs
crypto: hisilicon/qm - add DebugFS for xQC and xQE dump
crypto: hisilicon/zip - add debugfs for Hisilicon ZIP
crypto: hisilicon/hpre - add debugfs for Hisilicon HPRE
crypto: hisilicon/sec2 - add debugfs for Hisilicon SEC
crypto: hisilicon/qm - add debugfs to the QM state machine
crypto: hisilicon/qm - add debugfs for QM
crypto: stm32/crc32 - protect from concurrent accesses
crypto: stm32/crc32 - don't sleep in runtime pm
crypto: stm32/crc32 - fix multi-instance
crypto: stm32/crc32 - fix run-time self test issue.
crypto: stm32/crc32 - fix ext4 chksum BUG_ON()
crypto: hisilicon/zip - Use temporary sqe when doing work
crypto: hisilicon - add device error report through abnormal irq
crypto: hisilicon - remove codes of directly report device errors through MSI
crypto: hisilicon - QM memory management optimization
crypto: hisilicon - unify initial value assignment into QM
...
Pull networking fixes from David Miller:
"Another week, another set of bug fixes:
1) Fix pskb_pull length in __xfrm_transport_prep(), from Xin Long.
2) Fix double xfrm_state put in esp{4,6}_gro_receive(), also from Xin
Long.
3) Re-arm discovery timer properly in mac80211 mesh code, from Linus
Lüssing.
4) Prevent buffer overflows in nf_conntrack_pptp debug code, from
Pablo Neira Ayuso.
5) Fix race in ktls code between tls_sw_recvmsg() and
tls_decrypt_done(), from Vinay Kumar Yadav.
6) Fix crashes on TCP fallback in MPTCP code, from Paolo Abeni.
7) More validation is necessary of untrusted GSO packets coming from
virtualization devices, from Willem de Bruijn.
8) Fix endianness of bnxt_en firmware message length accesses, from
Edwin Peer.
9) Fix infinite loop in sch_fq_pie, from Davide Caratti.
10) Fix lockdep splat in DSA by setting lockless TX in netdev features
for slave ports, from Vladimir Oltean.
11) Fix suspend/resume crashes in mlx5, from Mark Bloch.
12) Fix use after free in bpf fmod_ret, from Alexei Starovoitov.
13) ARP retransmit timer guard uses wrong offset, from Hongbin Liu.
14) Fix leak in inetdev_init(), from Yang Yingliang.
15) Don't try to use inet hash and unhash in l2tp code, results in
crashes. From Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
l2tp: add sk_family checks to l2tp_validate_socket
l2tp: do not use inet_hash()/inet_unhash()
net: qrtr: Allocate workqueue before kernel_bind
mptcp: remove msk from the token container at destruction time.
mptcp: fix race between MP_JOIN and close
mptcp: fix unblocking connect()
net/sched: act_ct: add nat mangle action only for NAT-conntrack
devinet: fix memleak in inetdev_init()
virtio_vsock: Fix race condition in virtio_transport_recv_pkt
drivers/net/ibmvnic: Update VNIC protocol version reporting
NFC: st21nfca: add missed kfree_skb() in an error path
neigh: fix ARP retransmit timer guard
bpf, selftests: Add a verifier test for assigning 32bit reg states to 64bit ones
bpf, selftests: Verifier bounds tests need to be updated
bpf: Fix a verifier issue when assigning 32bit reg states to 64bit ones
bpf: Fix use-after-free in fmod_ret check
net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta()
net/mlx5e: Fix MLX5_TC_CT dependencies
net/mlx5e: Properly set default values when disabling adaptive moderation
net/mlx5e: Fix arch depending casting issue in FEC
...
A fix for the recent change to how we restore non-volatile GPRs, which broke our
emulation of reading from the DSCR (Data Stream Control Register).
And a fix for the recent rewrite of interrupt/syscall exit in C, we need to
exclude KCOV from that code, otherwise it can lead to unrecoverable faults.
Thanks to:
Daniel Axtens.
-----BEGIN PGP SIGNATURE-----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=TXe7
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.7-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- a fix for the recent change to how we restore non-volatile GPRs,
which broke our emulation of reading from the DSCR (Data Stream
Control Register).
- a fix for the recent rewrite of interrupt/syscall exit in C, we need
to exclude KCOV from that code, otherwise it can lead to
unrecoverable faults.
Thanks to Daniel Axtens.
* tag 'powerpc-5.7-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Disable sanitisers for C syscall/interrupt entry/exit code
powerpc/64s: Fix restore of NV GPRs after facility unavailable exception
Alexei Starovoitov says:
====================
pull-request: bpf 2020-05-29
The following pull-request contains BPF updates for your *net* tree.
We've added 6 non-merge commits during the last 7 day(s) which contain
a total of 4 files changed, 55 insertions(+), 34 deletions(-).
The main changes are:
1) minor verifier fix for fmod_ret progs, from Alexei.
2) af_xdp overflow check, from Bjorn.
3) minor verifier fix for 32bit assignment, from John.
4) powerpc has non-overlapping addr space, from Petr.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit 0ebeea8ca8 ("bpf: Restrict bpf_probe_read{, str}() only
to archs where they work") caused that bpf_probe_read{, str}() functions
were not longer available on architectures where the same logical address
might have different content in kernel and user memory mapping. These
architectures should use probe_read_{user,kernel}_str helpers.
For backward compatibility, the problematic functions are still available
on architectures where the user and kernel address spaces are not
overlapping. This is defined CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE.
At the moment, these backward compatible functions are enabled only on x86_64,
arm, and arm64. Let's do it also on powerpc that has the non overlapping
address space as well.
Fixes: 0ebeea8ca8 ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/lkml/20200527122844.19524-1-pmladek@suse.com
XIVE interrupt controller uses an Event Queue (EQ) to enqueue event
notifications when an exception occurs. The EQ is a single memory page
provided by the O/S defining a circular buffer, one per server and
priority couple.
On baremetal, the EQ page is configured with an OPAL call. On pseries,
an extra hop is necessary and the guest OS uses the hcall
H_INT_SET_QUEUE_CONFIG to configure the XIVE interrupt controller.
The XIVE controller being Hypervisor privileged, it will not be allowed
to enqueue event notifications for a Secure VM unless the EQ pages are
shared by the Secure VM.
Hypervisor/Ultravisor still requires support for the TIMA and ESB page
fault handlers. Until this is complete, QEMU can use the emulated XIVE
device for Secure VMs, option "kernel_irqchip=off" on the QEMU pseries
machine.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Reviewed-by: Cedric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200426020518.GC5853@oc0525413822.ibm.com
Function 'read_sys_info_pseries()' is added to get system parameter
values like number of sockets and chips per socket.
and it gets these details via rtas_call with token
"PROCESSOR_MODULE_INFO".
Incase lpar migrate from one system to another, system
parameter details like chips per sockets or number of sockets might
change. So, it needs to be re-initialized otherwise, these values
corresponds to previous system values.
This patch adds a call to 'read_sys_info_pseries()' from
'post-mobility_fixup()' to re-init the physsockets and physchips values
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525104308.9814-6-kjain@linux.ibm.com
To expose the system dependent parameter like total number of
sockets and numbers of chips per socket, patch adds two sysfs files.
"sockets" and "chips" are added to /sys/devices/hv_24x7/interface/
of the "hv_24x7" pmu.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525104308.9814-4-kjain@linux.ibm.com
For hv_24x7 socket/chip level events, specific chip-id to which
the data requested should be added as part of pmu events.
But number of chips/socket in the system details are not exposed.
Patch implements read_24x7_sys_info() to get system parameter values
like number of sockets, cores per chip and chips per socket. Rtas_call
with token "PROCESSOR_MODULE_INFO" is used to get these values.
Subsequent patch exports these values via sysfs.
Patch also make these parameters default to 1.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525104308.9814-3-kjain@linux.ibm.com
Commit 2b206ee6b0 ("powerpc/perf/hv-24x7: Display change in counter
values")' added to print _change_ in the counter value rather then raw
value for 24x7 counters. Incase of transactions, the event count
is set to 0 at the beginning of the transaction. It also sets
the event's prev_count to the raw value at the time of initialization.
Because of setting event count to 0, we are seeing some weird behaviour,
whenever we run multiple 24x7 events at a time.
For example:
command#: ./perf stat -e "{hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/,
hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/}"
-C 0 -I 1000 sleep 100
1.000121704 120 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
1.000121704 5 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
2.000357733 8 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
2.000357733 10 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
3.000495215 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
3.000495215 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
4.000641884 56 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
4.000641884 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
5.000791887 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
Getting these large values in case we do -I.
As we are setting event_count to 0, for interval case, overall event_count is not
coming in incremental order. As we may can get new delta lesser then previous count.
Because of which when we print intervals, we are getting negative value which create
these large values.
This patch removes part where we set event_count to 0 in function
'h_24x7_event_read'. There won't be much impact as we do set event->hw.prev_count
to the raw value at the time of initialization to print change value.
With this patch
In power9 platform
command#: ./perf stat -e "{hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/,
hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/}"
-C 0 -I 1000 sleep 100
1.000117685 93 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
1.000117685 1 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
2.000349331 98 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
2.000349331 2 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
3.000495900 131 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
3.000495900 4 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
4.000645920 204 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
4.000645920 61 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
4.284169997 22 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
Suggested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525104308.9814-2-kjain@linux.ibm.com
pnv_pci_ioda_configure_bus() should now only ever be called when a device is
added to the bus so add a WARN_ON() to the empty bus check. Similarly,
pnv_pci_ioda_setup_bus_PE() should only ever be called for an unconfigured PE,
so add a WARN_ON() for that case too.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200417073508.30356-5-oohall@gmail.com
Doing it once during boot rather than doing it on the fly and drop the janky
populated logic.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200417073508.30356-4-oohall@gmail.com
For normal PHBs IODA PEs are handled on a per-bus basis so all the devices
on that bus will share a PE. Which PE specificly is determined by the location
of the MMIO BARs for the devices on the bus so we can't actually configure the
bus PEs until after MMIO resources are allocated. As a result PEs are currently
configured by pcibios_setup_bridge(), which is called just before the bridge
windows are programmed into the bus' parent bridge. Configuring the bus PE here
causes a few problems:
1. The root bus doesn't have a parent bridge so setting up the PE for the root
bus requires some hacks.
2. The PELT-V isn't setup correctly because pnv_ioda_set_peltv() assumes that
PEs will be configured in root-to-leaf order. This assumption is broken
because resource assignment is performed depth-first so the leaf bridges
are setup before their parents are. The hack mentioned in 1) results in
the "correct" PELT-V for busses immediately below the root port, but not
for devices below a switch.
3. It's possible to break the sysfs PCI rescan feature by removing all
the devices on a bus. When the last device is removed from a PE its
will be de-configured. Rescanning the devices on a bus does not cause
the bridge to be reconfigured rendering the devices on that bus
unusable.
We can address most of these problems by moving the PE setup out of
pcibios_setup_bridge() and into pcibios_bus_add_device(). This fixes 1)
and 2) because pcibios_bus_add_device() is called on each device in
root-to-leaf order so PEs for parent buses will always be configured
before their children. It also fixes 3) by ensuring the PE is
configured before initialising DMA for the device. In the event the PE
was de-configured due to removing all the devices in that PE it will
now be reconfigured when a new device is added since there's no
dependecy on the bridge_setup() hook being called.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200417073508.30356-3-oohall@gmail.com
For each PHB we maintain a reverse-map that can be used to find the
PE that a BDFN is currently mapped to. Add a helper for doing this
lookup so we can check if a PE has been configured without looking
at pdn->pe_number.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200417073508.30356-2-oohall@gmail.com
It's pretty obsecure and confused me for a long time so I figured it's
worth documenting properly.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200414233502.758-1-oohall@gmail.com
Quite useful to know in some cases.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200408112213.5549-1-oohall@gmail.com
The NVlink IOMMU group setup is only relevant to NVLink devices so move
it into the NPU containment zone. This let us remove some prototypes in
pci.h and staticfy some function definitions.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200406030745.24595-8-oohall@gmail.com
Move it in with the rest of the TCE wrangling rather than carting around
a static prototype in pci-ioda.c
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200406030745.24595-7-oohall@gmail.com
Historically adding devices to their respective iommu group has been
handled by the post-init phb fixup for most devices. This was done
because:
1) The IOMMU group is tied to the PE (usually) so we can only setup the
iommu groups after we've done resource allocation since BAR location
determines the device's PE, and:
2) The sysfs directory for the pci_dev needs to be available since
iommu_add_device() wants to add an attribute for the iommu group.
However, since commit 30d87ef8b3 ("powerpc/pci: Fix
pcibios_setup_device() ordering") both conditions are met when
hose->ops->dma_dev_setup() is called so there's no real need to do
this in the fixup.
Moving the call to iommu_add_device() into pnv_pci_ioda_dma_setup_dev()
is a nice cleanup since it puts all the per-device IOMMU setup into one
place. It also results in all (non-nvlink) devices getting their iommu
group via a common path rather than relying on the bus notifier hack
in pnv_tce_iommu_bus_notifier() to handle the adding VFs and
hotplugged devices to their group.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200406030745.24595-5-oohall@gmail.com
Move the registration of IOMMU groups out of the post-phb init fixup and
into when we configure DMA for a PE. For most devices this doesn't
result in any functional changes, but for NVLink attached GPUs it
requires a bit of care. When the GPU is probed an IOMMU group would be
created for the PE that contains it. We need to ensure that group is
removed before we add the PE to the compound group that's used to keep
the translations see by the PCIe and NVLink buses the same.
No functional changes. Probably.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200406030745.24595-4-oohall@gmail.com
In pnv_ioda_setup_vf_PE() we register an iommu group for the VF PE
then call pnv_ioda_setup_bus_iommu_group() to add devices to that group.
However, this function is called before the VFs are scanned so there's
no devices to add.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200406030745.24595-3-oohall@gmail.com
Re-work the control flow a bit so what's going on is a little clearer.
This also ensures the table_group is only initialised once in the P9
case. This shouldn't be a functional change since all the GPU PCI
devices should have the same table_group configuration, but it does
look strange.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200406030745.24595-2-oohall@gmail.com
Similar to the C code change, make the AMR restore conditional on
whether the register has changed.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200429065654.1677541-7-npiggin@gmail.com
The AMR update is made conditional on AMR actually changing, which
should be the less common case on most workloads (though kernel page
faults on uaccess could be frequent, this doesn't significantly slow
down that case).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200429065654.1677541-4-npiggin@gmail.com
Writing the AMR register is documented to require context
synchronizing operations before and after, for it to take effect as
expected. The KUAP restore at interrupt exit time deliberately avoids
the isync after the AMR update because it only needs to take effect
after the context synchronizing RFID that soon follows. Add a comment
for this.
The missing isync before the update doesn't have an obvious
justification, and seems it could theoretically allow a rogue user
access to leak past the AMR update. Add isyncs for these.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200429065654.1677541-3-npiggin@gmail.com
Let's reduce the number of registers used in TLB miss handlers.
We have both r9 and r12 available for any temporary use.
r9 is enough, avoid using r12.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7f330e971952abb2645fb9ca4310c0f527e84dcb.1590079969.git.christophe.leroy@csgroup.eu
Commit 1bc54c0311 ("powerpc: rework 4xx PTE access and TLB miss")
reworked 44x PTE access to avoid atomic pte updates, and
left 8xx, 40x and fsl booke with atomic pte updates.
Commit 6cfd8990e2 ("powerpc: rework FSL Book-E PTE access and TLB
miss") removed atomic pte updates on fsl booke.
It went away on 8xx with commit ddfc20a3b9 ("powerpc/8xx: Remove
PTE_ATOMIC_UPDATES").
40x is the last platform setting PTE_ATOMIC_UPDATES.
Rework PTE access and TLB miss to remove PTE_ATOMIC_UPDATES for 40x:
- Always handle DSI as a fault.
- Bail out of TLB miss handler when CONFIG_SWAP is set and
_PAGE_ACCESSED is not set.
- Bail out of ITLB miss handler when _PAGE_EXEC is not set.
- Only set WR bit when both _PAGE_RW and _PAGE_DIRTY are set.
- Remove _PAGE_HWWRITE
- Don't require PTE_ATOMIC_UPDATES anymore
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/99a0fcd337ef67088140d1647d75fea026a70413.1590079968.git.christophe.leroy@csgroup.eu
The latest Xilinx design tools called ISE and EDK has been released in
October 2013. New tool doesn't support any PPC405/PPC440 new designs.
These platforms are no longer supported and tested.
PowerPC 405/440 port is orphan from 2013 by
commit cdeb89943b ("MAINTAINERS: Fix incorrect status tag") and
commit 19624236cc ("MAINTAINERS: Update Grant's email address and maintainership")
that's why it is time to remove the support fot these platforms.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8c593895e2cb57d232d85ce4d8c3a1aa7f0869cc.1590079968.git.christophe.leroy@csgroup.eu
