DT schema is checking tuples which should be properly separated. The patch
is doing this separation to avoid the following warning:
..yaml: axi: pcie@fd0e0000:ranges: [[33554432, 0, 3758096384, 0,
3758096384, 0, 268435456, 1124073472, 6, 0, 6, 0, 2, 0]] is not valid under
any of the given schemas (Possible causes of the failure):
...dt.yaml: axi: pcie@fd0e0000:ranges: True was expected
...dt.yaml: axi: pcie@fd0e0000:ranges:0: [33554432, 0, 3758096384, 0,
3758096384, 0, 268435456, 1124073472, 6, 0, 6, 0, 2, 0] is too long
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/f59a63d8cb941592de6d2dee8afa6f120b2e40c8.1601379794.git.michal.simek@xilinx.com
The reason for this change is that after change from amba to axi U-Boot
started to show error like:
Unable to update property /axi/ethernet@ff0e0000:mac-address, err=FDT_ERR_NOTFOUND
Unable to update property /axi/ethernet@ff0e0000:local-mac-address, err=FDT_ERR_NOTFOUND
The reason is implementation in fdt_nodename_eq_() which is taken from dtc
to the kernel and to the U-Boot. Especially DTC commit d2a9da045897 ("libfdt:
Make unit address optional for finding nodes") which is in DTC from 2007.
The part of commit description is
" This is contrary to traditional OF-like finddevice() behaviour, which
allows the unit address to be omitted (which is useful when the device
name is unambiguous without the address)."
The kernel commit dfff9066e6 ("arm64: dts: zynqmp: Rename buses to be
align with simple-bus yaml") changed amba-apu/amba to axi@0/axi but
fdt_nodename_eq_() detects /axi/ as match for /axi@0/ because of commit
above.
That's why it easier to fix one DT inside the kernel by moving GIC node
from own bus to generic axi bus as is done by others SoCs. This will avoid
incorrect match because the unit address is omitted.
Reported-by: Paul Thomas <pthomas8589@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/f767fe007e446a2299fda9905e75b723c650a424.1605021644.git.michal.simek@xilinx.com
LED core does not allow LED_COLOR_ID_MULTI for now and instead for RGB
LEDs prefers LED_COLOR_ID_RGB.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 77dce3a22e ("leds: disallow /sys/class/leds/*:multi:* for now")
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Although checkpatch changed the max-line-length default to 100 columns,
we still prefer 80 columns somewhere.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Use integer constants directly when building I2C messages for LED color
change command, instead of macros. The command is simple enough to
understand what is going on even without these names.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Add a new function for returning descriptors the user received
after an xsk_ring_cons__peek call. After the application has
gotten a number of descriptors from a ring, it might not be able
to or want to process them all for various reasons. Therefore,
it would be useful to have an interface for returning or
cancelling a number of them so that they are returned to the ring.
This patch adds a new function called xsk_ring_cons__cancel that
performs this operation on nb descriptors counted from the end of
the batch of descriptors that was received through the peek call.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
[ Magnus Karlsson: rewrote changelog ]
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/1606202474-8119-1-git-send-email-lirongqing@baidu.com
The example was adapted in the following ways:
- make use of the now supported 'function' and 'color' properties
- remove pwm nodes, those are documented elsewhere
- align node names to new dt schema rules and dt recommendations
License was not explicitly set before. The license set now is
recommended by DT project.
Suggested-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Alexander Dahl <post@lespocky.de>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
[For the license change only:]
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
In case of memory allocation failure, we must release some resources as
done in all other error handling paths of the function.
'goto child_out' instead of a direct return so that 'fwnode_handle_put()'
is called when we break out of a 'device_for_each_child_node' loop.
Fixes: 242b81170f ("leds: lp50xx: Add the LP50XX family of the RGB LED driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
if of_find_device_by_node() succeed, netxbig_leds_get_of_pdata() doesn't
have a corresponding put_device(). Thus add jump target to fix the
exception handling for this function implementation.
Fixes: 2976b17989 ("leds: netxbig: add device tree binding")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
The default domain type of an iommu group can be changed by writing to
"/sys/kernel/iommu_groups/<grp_id>/type" file. Hence, document it's usage
and more importantly spell out its limitations.
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20201124130604.2912899-5-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
"/sys/kernel/iommu_groups/<grp_id>/type" file could be read to find out the
default domain type of an iommu group. The default domain of an iommu group
doesn't change after booting and hence could be read directly. But,
after addding support to dynamically change iommu group default domain, the
above assumption no longer stays valid.
iommu group default domain type could be changed at any time by writing to
"/sys/kernel/iommu_groups/<grp_id>/type". So, take group mutex before
reading iommu group default domain type so that the user wouldn't see stale
values or iommu_group_show_type() doesn't try to derefernce stale pointers.
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20201124130604.2912899-4-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Presently, the default domain of an iommu group is allocated during boot
time and it cannot be changed later. So, the device would typically be
either in identity (also known as pass_through) mode or the device would be
in DMA mode as long as the machine is up and running. There is no way to
change the default domain type dynamically i.e. after booting, a device
cannot switch between identity mode and DMA mode.
But, assume a use case wherein the user trusts the device and believes that
the OS is secure enough and hence wants *only* this device to bypass IOMMU
(so that it could be high performing) whereas all the other devices to go
through IOMMU (so that the system is protected). Presently, this use case
is not supported. It will be helpful if there is some way to change the
default domain of an iommu group dynamically. Hence, add such support.
A privileged user could request the kernel to change the default domain
type of a iommu group by writing to
"/sys/kernel/iommu_groups/<grp_id>/type" file. Presently, only three values
are supported
1. identity: all the DMA transactions from the device in this group are
*not* translated by the iommu
2. DMA: all the DMA transactions from the device in this group are
translated by the iommu
3. auto: change to the type the device was booted with
Note:
1. Default domain of an iommu group with two or more devices cannot be
changed.
2. The device in the iommu group shouldn't be bound to any driver.
3. The device shouldn't be assigned to user for direct access.
4. The change request will fail if any device in the group has a mandatory
default domain type and the requested one conflicts with that.
Please see "Documentation/ABI/testing/sysfs-kernel-iommu_groups" for more
information.
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20201124130604.2912899-3-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
After commit 327d5b2fee ("iommu/vt-d: Allow 32bit devices to uses DMA
domain"), swiotlb could also be used for direct memory access if IOMMU
is enabled but a device is configured to pass through the DMA translation.
Keep swiotlb when IOMMU is forced on, otherwise, some devices won't work
if "iommu=pt" kernel parameter is used.
Fixes: 327d5b2fee ("iommu/vt-d: Allow 32bit devices to uses DMA domain")
Reported-and-tested-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20201125014124.4070776-1-baolu.lu@linux.intel.com
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=210237
Signed-off-by: Will Deacon <will@kernel.org>
Some cleanups after converting the driver to use dma-iommu ops.
- Remove nobounce option;
- Cleanup and simplify the path in domain mapping.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/20201124082057.2614359-8-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Convert the intel iommu driver to the dma-iommu api. Remove the iova
handling and reserve region code from the intel iommu driver.
Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/20201124082057.2614359-7-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
The iommu-dma constrains IOVA allocation based on the domain geometry
that the driver reports. Update domain geometry everytime a domain is
attached to or detached from a device.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/20201124082057.2614359-6-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Combining the sg segments exposes a bug in the Intel i915 driver which
causes visual artifacts and the screen to freeze. This is most likely
because of how the i915 handles the returned list. It probably doesn't
respect the returned value specifying the number of elements in the list
and instead depends on the previous behaviour of the Intel iommu driver
which would return the same number of elements in the output list as in
the input list.
[ This has been fixed in the i915 tree, but we agreed to carry this fix
temporarily in the iommu tree and revert it before 5.11 is released:
https://lore.kernel.org/linux-iommu/20201103105442.GD22888@8bytes.org/
-- Will ]
Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/20201124082057.2614359-5-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Allow the dma-iommu api to use bounce buffers for untrusted devices.
This is a copy of the intel bounce buffer code.
Co-developed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/20201124082057.2614359-4-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Add a iommu_dma_free_cpu_cached_iovas function to allow drivers which
use the dma-iommu ops to free cached cpu iovas.
Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/20201124082057.2614359-3-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Allow the iommu_unmap_fast to return newly freed page table pages and
pass the freelist to queue_iova in the dma-iommu ops path.
This is useful for iommu drivers (in this case the intel iommu driver)
which need to wait for the ioTLB to be flushed before newly
free/unmapped page table pages can be freed. This way we can still batch
ioTLB free operations and handle the freelists.
Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/20201124082057.2614359-2-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
The bdi_dev_name() returns a char [64], and
the __entry->name is a char [32].
It maybe dangerous to TP_printk("%s", __entry->name)
after the strncpy().
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201124165205.GA23937@rlk
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hui Su <sh_def@163.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Only in smp systems the cache policy is setup as write alloc, in
single cpu systems the cache policy is set as writeback and it is
normal memory, so, it should pass the is_normal_memory check in the
share memory registration.
Add the right condition to make it work in no smp systems.
Fixes: cdbcf83d29 ("tee: optee: check type of registered shared memory")
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
This file content describes memory allocation status
at run-time, typically to detect memory leaks.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201124180017.2232128-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Section comment should be coherent with IPC prefix from define
names.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201124180017.2232128-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Each define value in series should be aligned and tabs should
be used instead of spaces to follow code-style.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201124180017.2232128-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Values given in this dictionary describes used firmware configuration,
like feature availability, buffer size limits and similar properties.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201124180017.2232128-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The bus_set_iommu() in tegra_smmu_probe() enumerates all clients
to call in tegra_smmu_probe_device() where each client searches
its DT node for smmu pointer and swgroup ID, so as to configure
an fwspec. But this requires a valid smmu pointer even before mc
and smmu drivers are probed. So in tegra_smmu_probe() we added a
line of code to fill mc->smmu, marking "a bit of a hack".
This works for most of clients in the DTB, however, doesn't work
for a client that doesn't exist in DTB, a PCI device for example.
Actually, if we return ERR_PTR(-ENODEV) in ->probe_device() when
it's called from bus_set_iommu(), iommu core will let everything
carry on. Then when a client gets probed, of_iommu_configure() in
iommu core will search DTB for swgroup ID and call ->of_xlate()
to prepare an fwspec, similar to tegra_smmu_probe_device() and
tegra_smmu_configure(). Then it'll call tegra_smmu_probe_device()
again, and this time we shall return smmu->iommu pointer properly.
So we can get rid of tegra_smmu_find() and tegra_smmu_configure()
along with DT polling code by letting the iommu core handle every
thing, except a problem that we search iommus property in DTB not
only for swgroup ID but also for mc node to get mc->smmu pointer
to call dev_iommu_priv_set() and return the smmu->iommu pointer.
So we'll need to find another way to get smmu pointer.
Referencing the implementation of sun50i-iommu driver, of_xlate()
has client's dev pointer, mc node and swgroup ID. This means that
we can call dev_iommu_priv_set() in of_xlate() instead, so we can
simply get smmu pointer in ->probe_device().
This patch reworks tegra_smmu_probe_device() by:
1) Removing mc->smmu hack in tegra_smmu_probe() so as to return
ERR_PTR(-ENODEV) in tegra_smmu_probe_device() during stage of
tegra_smmu_probe/tegra_mc_probe().
2) Moving dev_iommu_priv_set() to of_xlate() so we can get smmu
pointer in tegra_smmu_probe_device() to replace DTB polling.
3) Removing tegra_smmu_configure() accordingly since iommu core
takes care of it.
This also fixes a problem that previously we could add clients to
iommu groups before iommu core initializes its default domain:
ubuntu@jetson:~$ dmesg | grep iommu
platform 50000000.host1x: Adding to iommu group 1
platform 57000000.gpu: Adding to iommu group 2
iommu: Default domain type: Translated
platform 54200000.dc: Adding to iommu group 3
platform 54240000.dc: Adding to iommu group 3
platform 54340000.vic: Adding to iommu group 4
Though it works fine with IOMMU_DOMAIN_UNMANAGED, but will have
warnings if switching to IOMMU_DOMAIN_DMA:
iommu: Failed to allocate default IOMMU domain of type 0 for
group (null) - Falling back to IOMMU_DOMAIN_DMA
iommu: Failed to allocate default IOMMU domain of type 0 for
group (null) - Falling back to IOMMU_DOMAIN_DMA
Now, bypassing the first probe_device() call from bus_set_iommu()
fixes the sequence:
ubuntu@jetson:~$ dmesg | grep iommu
iommu: Default domain type: Translated
tegra-host1x 50000000.host1x: Adding to iommu group 0
tegra-dc 54200000.dc: Adding to iommu group 1
tegra-dc 54240000.dc: Adding to iommu group 1
tegra-vic 54340000.vic: Adding to iommu group 2
nouveau 57000000.gpu: Adding to iommu group 3
Note that dmesg log above is testing with IOMMU_DOMAIN_UNMANAGED.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201125101013.14953-5-nicoleotsuka@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
In tegra_smmu_(de)attach_dev() functions, we poll DTB for each
client's iommus property to get swgroup ID in order to prepare
"as" and enable smmu. Actually tegra_smmu_configure() prepared
an fwspec for each client, and added to the fwspec all swgroup
IDs of client DT node in DTB.
So this patch uses fwspec in tegra_smmu_(de)attach_dev() so as
to replace the redundant DT polling code.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201125101013.14953-4-nicoleotsuka@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
This is used to protect potential race condition at use_count.
since probes of client drivers, calling attach_dev(), may run
concurrently.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201125101013.14953-3-nicoleotsuka@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
The tegra_smmu_group_get was added to group devices in different
SWGROUPs and it'd return a NULL group pointer upon a mismatch at
tegra_smmu_find_group(), so for most of clients/devices, it very
likely would mismatch and need a fallback generic_device_group().
But now tegra_smmu_group_get handles devices in same SWGROUP too,
which means that it would allocate a group for every new SWGROUP
or would directly return an existing one upon matching a SWGROUP,
i.e. any device will go through this function.
So possibility of having a NULL group pointer in device_group()
is upon failure of either devm_kzalloc() or iommu_group_alloc().
In either case, calling generic_device_group() no longer makes a
sense. Especially for devm_kzalloc() failing case, it'd cause a
problem if it fails at devm_kzalloc() yet succeeds at a fallback
generic_device_group(), because it does not create a group->list
for other devices to match.
This patch simply unwraps the function to clean it up.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201125101013.14953-2-nicoleotsuka@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
The variable next_addr is not initialized and is being used in a call
to i3c_master_get_free_addr as a starting point to find the next address.
Fix this by initializing next_addr to 0 to avoid an uninitialized garbage
starting address from being used.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-i3c/20201124123504.396249-1-colin.king@canonical.com
We hardcode the maximum number of shared fences to 4, instead of
respecting num_fences. Use a minimum of 4, but more if num_fences
is higher.
This seems to have been an oversight when first implementing the
api.
Fixes: 04a5faa8cb ("reservation: update api and add some helpers")
Cc: <stable@vger.kernel.org> # v3.17+
Reported-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201124115707.406917-1-maarten.lankhorst@linux.intel.com
Pinned pages are not properly accounted particularly when
mapping error occurs on IOTLB update. Clean up dangling
pinned pages for the error path.
The memory usage for bookkeeping pinned pages is reverted
to what it was before: only one single free page is needed.
This helps reduce the host memory demand for VM with a large
amount of memory, or in the situation where host is running
short of free memory.
Fixes: 4c8cf31885 ("vhost: introduce vDPA-based backend")
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Link: https://lore.kernel.org/r/1604618793-4681-1-git-send-email-si-wei.liu@oracle.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
vringh_iov_push_*() functions don't have 'dst' parameter, but have
the 'src' parameter.
Replace 'dst' description with 'src' description.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201116161653.102904-1-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost scsi owns the scsi se_cmd but lio frees the se_cmd->se_tmr
before calling release_cmd, so while with normal cmd completion we
can access the se_cmd from the vhost work, we can't do the same with
se_cmd->se_tmr. This has us copy the tmf response in
vhost_scsi_queue_tm_rsp to our internal vhost-scsi tmf struct for
when it gets sent to the guest from our worker thread.
Fixes: efd838fec1 ("vhost scsi: Add support for LUN resets.")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/1605887459-3864-1-git-send-email-michael.christie@oracle.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are few nice macros in mm.h, some of which we may use here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The gamma LUT has to be reloaded after changing the primary plane's
color format. This used to be done implicitly by the CRTC atomic_enable()
helper after updating the primary plane. With the recent reordering of
the steps, the primary plane's setup was moved last and invalidated
the gamma LUT. Fix this by setting the LUT from within atomic_flush().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 2f0ddd89fe ("drm/ast: Enable CRTC before planes")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200922144655.23624-1-tzimmermann@suse.de
(cherry-picked from 8e3784dfef)
Size is page count here.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1372
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d836917da7)
[airlied: from drm-next]
Signed-off-by: Dave Airlie <airlied@redhat.com>
We should only access the fields that are relevant for DP0, and never
write to reserved or read-only SDCA_CASCADE fields.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201124013318.8963-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
DP0 has reserved fields and the read-only SDCA_CASCADE bit. We should
not try to write values in these fields, so add a formal definition
for clearable interrupts to be used in DP0 interrupt handling.
DPN also has reserved fields so add definitions for clearable
interrupts as well.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201124013318.8963-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The code loops multiple times to deal with pending interrupts, but we
never reset the slave_notify status.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201124013318.8963-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The interrupt handling in SoundWire requires software to re-read the
interrupt status after clearing an interrupt. In case the interrupt is
still outstanding, the code in bus.c will loop a number of times,
however that loop is limited to the interrupts detected in the first
read. This strategy helps meet SoundWire requirements without
remaining forever in an interrupt handler.
Add a couple of comments to document this design.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201124013318.8963-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
