in order to add trace event in configfs function with same
struct gadget_info *gi parameter,
add struct config_usb_cfg *cfg variable in below functions,
gadget_config_desc_MaxPower_show(),
gadget_config_desc_MaxPower_store(),
gadget_config_desc_bmAttributes_show(),
gadget_config_desc_bmAttributes_store(),
this allow following patch easy change cfg to gi with helper function
cfg_to_gadget_info().
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/1634649997-28745-3-git-send-email-quic_linyyuan@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the DWC3_EP_* flag macros so that the definitions are all
lined up on the same tab column for consistent style.
No functional change.
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20211021180129.27938-2-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some functions may dynamically enable and disable their endpoints
regularly throughout their operation, particularly when Set Interface
is employed to switch between Alternate Settings. For instance the
UAC2 function has its respective endpoints for playback & capture
associated with AltSetting 1, in which case those endpoints would not
get enabled until the host activates the AltSetting. And they
conversely become disabled when the interfaces' AltSetting 0 is
chosen.
With the DWC3 FIFO resizing algorithm recently added, every
usb_ep_enable() call results in a call to resize that EP's TXFIFO,
but if the same endpoint is enabled again and again, this incorrectly
leads to FIFO RAM allocation exhaustion as the mechanism did not
account for the possibility that endpoints can be re-enabled many
times.
Example log splat:
dwc3 a600000.dwc3: Fifosize(3717) > RAM size(3462) ep3in depth:217973127
configfs-gadget gadget: u_audio_start_capture:521 Error!
dwc3 a600000.dwc3: request 000000000be13e18 was not queued to ep3in
Add another bit DWC3_EP_TXFIFO_RESIZED to dep->flags to keep track of
whether an EP had already been resized in the current configuration.
If so, bail out of dwc3_gadget_resize_tx_fifos() to avoid the
calculation error resulting from accumulating the EP's FIFO depth
repeatedly. This flag is retained across multiple ep_disable() and
ep_enable() calls and is cleared when GTXFIFOSIZn is reset in
dwc3_gadget_clear_tx_fifos() upon receiving the next Set Config.
Fixes: 9f607a309f ("usb: dwc3: Resize TX FIFOs to meet EP bursting requirements")
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20211021180129.27938-1-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chipidea core was calling the interrupt handler from non-IRQ context
with interrupts enabled, something which can lead to a deadlock if
there's an actual interrupt trying to take a lock that's already held
(e.g. the controller lock in udc_irq()).
Add a wrapper that can be used to fake interrupts instead of calling the
handler directly.
Fixes: 3ecb3e09b0 ("usb: chipidea: Use extcon framework for VBUS and ID detect")
Fixes: 876d4e1e82 ("usb: chipidea: core: add wakeup support for extcon")
Cc: Peter Chen <peter.chen@kernel.org>
Cc: stable@vger.kernel.org # 4.4
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211021083447.20078-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
musb_gadget_queue() adds the passed request to musb_ep::req_list. If the
endpoint is idle and it is the first request then it invokes
musb_queue_resume_work(). If the function returns an error then the
error is passed to the caller without any clean-up and the request
remains enqueued on the list. If the caller enqueues the request again
then the list corrupts.
Remove the request from the list on error.
Fixes: ea2f35c01d ("usb: musb: Fix sleeping function called from invalid context for hdrc glue")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Viraj Shah <viraj.shah@linutronix.de>
Link: https://lore.kernel.org/r/20211021093644.4734-1-viraj.shah@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Error message appears during suspend, where musb driver is storing
the register state in musb_save_context():
```
musb-sunxi 1c19000.usb: Error unknown readb offset 112
```
Print warning instead to avoid confusion.
Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com>
Link: https://lore.kernel.org/r/20211019131244.1568560-1-r.stratiienko@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the uvc video device is created on demand, we have to ensure
that the struct is always zeroed. Otherwise the previous settings
might collide with the new values.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20211017215017.18392-7-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the streaming endpoint is not enabled, the worker has nothing to do.
In the case buffers are still queued, this patch ensures that it will bail
out without handling any data.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20211017215017.18392-6-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch ensures that the video pump thread will only be scheduled if
the uvc is really in streaming state. This way the worker will not have
to run on an empty queue.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20211017215017.18392-5-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The reason that the ep_queue has failed could be a disabled endpoint.
In that case it is not guaranteed that the ep->desc is still valid.
This patch adds a check for NULL.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20211017215017.18392-4-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When enabling info debugging for the uvc gadget, the bind and unbind
infos use different formats. Change the unbind to visually match the
bind.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20211017215017.18392-3-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The uvc request headerlen of 2 was defined as UVCG_REQUEST_HEADER_LEN
in commit e81e7f9a0e ("usb: gadget: uvc: add scatter gather support").
We missed to use it consistently. This patch fixes that.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20211018072059.11465-1-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Instead of maintaining a single-linked list of devices that must be
searched linearly in .remove() just use spi_set_drvdata() to remember the
link between the spi device and the driver struct. Then the global list
and the next member can be dropped.
This simplifies the driver, reduces the memory footprint and the time to
search the list. Also it makes obvious that there is always a corresponding
driver struct for a given device in .remove(), so the error path for
!max3421_hcd can be dropped, too.
As a side effect this fixes a data inconsistency when .probe() races with
itself for a second max3421 device in manipulating max3421_hcd_list. A
similar race is fixed in .remove(), too.
Fixes: 2d53139f31 ("Add support for using a MAX3421E chip as a host driver.")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211018204028.2914597-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If role is changed without the "none" step, A- and B- valid session could
be set at the same time. It is an issue.
This patch resets A-session if role switch sets B-session, and resets
B-session if role switch sets A-session.
Then, it is possible to change the role without the "none" step.
Fixes: 17f934024e ("usb: dwc2: override PHY input signals with usb role switch support")
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211005095305.66397-4-amelie.delaunay@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of USB_DR_MODE_PERIPHERAL, the OTG clock is disabled at the end of
the probe (it is not the case if USB_DR_MODE_HOST or USB_DR_MODE_OTG).
The clock is then enabled on udc_start.
If dwc2_drd_role_sw_set is called before udc_start (it is the case if the
usb cable is plugged at boot), GOTGCTL and GUSBCFG registers cannot be
read/written, so session cannot be overridden.
To avoid this case, check the ll_hw_enabled value and enable the clock if
it is available, and disable it after the override.
Fixes: 17f934024e ("usb: dwc2: override PHY input signals with usb role switch support")
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211005095305.66397-3-amelie.delaunay@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of forcing the role to Device, check the dr_mode configuration.
If the core is Host only, force the mode to Host, this to avoid the
dwc2_force_mode warning:
WARNING: CPU: 1 PID: 21 at drivers/usb/dwc2/core.c:615 dwc2_drd_init+0x104/0x17c
When forcing mode to Host, dwc2_force_mode may sleep the time the host
role is applied. To avoid sleeping while atomic context, move the call
to dwc2_force_mode after spin_unlock_irqrestore. It is safe, as
interrupts are not yet unmasked here.
Fixes: 17f934024e ("usb: dwc2: override PHY input signals with usb role switch support")
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211005095305.66397-2-amelie.delaunay@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While going into S3 or S4 suspend, an OHCI host controller can
generate interrupt requests if the INTR_SF enable flag is set. The
interrupt handler routine isn't prepared for this and it doesn't turn
off the flag, causing an interrupt storm.
To fix this problem, make ohci_rh_suspend() always disable INTR_SF
interrupts after processing the done list and the ED unlinks but
before the controller goes into the suspended (non-UsbOperational)
state. There's no reason to leave the flag enabled, since a
suspended controller doesn't generate Start-of-Frame packets.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Link: https://lore.kernel.org/r/1634095928-29639-1-git-send-email-zhuyinbo@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since function drivers will still be active until dwc3_disconnect_gadget()
is called, some applications will continue to queue packets to DWC3
gadget. This can lead to a flood of messages regarding failed ep queue,
as the endpoint is in the process of being disabled. Change the log
level to debug, so that it can be enabled when debugging issues.
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/20211018192647.32121-1-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20211019172124.1413620-1-kuba@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 9bba962755.
The above commit was added to prevent the tipd driver from loading
in devices which have INT3515 ACPI nodes since high CPU load was
reported in these devices due to interrupt flood. Now that the issue
of interrupt flood in the tipd driver is fixed, re-enable the creation
of platform device for INT3515 ACPI nodes.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Saranya Gopal <saranya.gopal@intel.com>
Link: https://lore.kernel.org/r/20211020022620.21012-3-saranya.gopal@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
TI PD controller comes with notification mechanism to inform
the host on activity in the PD controller. In the current
driver, the required masks are not set. This patch enables
the following events in the interrupt mask register:
PowerStatusUpdate - Set whenever contents of the power status reg changes
DataStatusUpdate - Set whenever contents of the data status reg changes
PlugInsertOrRemoval - Set whenever USB plug status has changed
With this change, the interrupt flooding issue is not seen anymore.
Suggested-by: Rajaram Regupathy <rajaram.regupathy@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Saranya Gopal <saranya.gopal@intel.com>
Datasheet: https://www.ti.com/lit/ug/slvuan1a/slvuan1a.pdf
Link: https://lore.kernel.org/r/20211020022620.21012-2-saranya.gopal@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
REGMAP_I2C is not a user visible kconfig symbol so driver configs
should not "depend on" it. They should depend on I2C and then
select REGMAP_I2C.
If this worked, it was only because some other driver had set/enabled
REGMAP_I2C.
Fixes: da0cb63100 ("usb: typec: add support for STUSB160x Type-C controller family")
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Amelie Delaunay <amelie.delaunay@st.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20211015013609.7300-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These drive enclosures have firmware bugs that make it impossible to mount
a new virtual ISO image after Linux ejects the old one if the device is
locked by Linux. Windows bypasses this problem by the fact that they do
not lock the device. Add a quirk to disable device locking for these
drive enclosures.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Buren <braewoods+lkml@braewoods.net>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211014015504.2695089-1-braewoods+lkml@braewoods.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 fixes for this cycle:
* Fix a null pointer dereference in ahci-platform driver (from Hai)
* Fix uninitialized variables in pata_legacy driver (from Dan)
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYWzTkAAKCRDdoc3SxdoY
ductAQCNJ4xNuZVaFFiwvrQOn16xQsu/UHnBReqdBBLytSaW1wD+IjAKEaOYVTbU
0nLtzNSxV52N6o6xSouUT7vxVJ7kjQI=
=H02G
-----END PGP SIGNATURE-----
Merge tag 'libata-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull libata fixes from Damien Le Moal:
"Two fixes for this cycle:
- Fix a null pointer dereference in ahci-platform driver (from Hai)
- Fix uninitialized variables in pata_legacy driver (from Dan)"
* tag 'libata-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: ahci_platform: fix null-ptr-deref in ahci_platform_enable_regulators()
pata_legacy: fix a couple uninitialized variable bugs
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmFsIqAQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgppbBEACDewLUv7bg1VFIGdroRN51OGiOv1oV+8HP
ruY7O9CPtV7wcb3lA1Zy9igICuzuC5culHjbRJrNIUeTdWCQHCFk/sfKSD6VGMoT
cFTqpKxV7M3vYr9G2m5TFWgY2mfS+I5fxyDZxK2z2esHCFw6TZ7A5W13xScVXKP+
QdNFSlTrGkpggsSIEeHApG+NLsIecnkT4qzm8zPfUodUtQ3A8JMjQjnYUFEAWfWv
l9x9zDIzaGjPtXf5soFEvmdh1ALh3WWiYb1kIwK1FeP/PYX0JV/3zCMgqOwpK+4b
69OM3Q0NPHvu2TgSRK+ghekAtz5qgPDMCrzdhSgLYJEL/PGAOboqjrB9E+wWoEjd
IKrYLx4Xao2TUZLJF2y34hHfODGdasx7d+wS191UpVFEZHFhDhIaazZ2rDd5xnQK
LdzQw1JQF/igJovHauhSkGFIdJWBSDneLQoMimBnitZlsWARUmFSZej34FFRLZsW
8ZXfqipn/x+fh4sQ/HdEfWxnGHtveDpU+0Ka5bMUe/tJ9RPtmn/Ye7nFjYecC6NY
4UzFSNn+4e9DpHaDuP3I/eA1YBmVlcB5Hum3ve7X6ovwpjArYg3dgJOEi8uCZjfb
hdMANmkVptcPiEO9njEHhC7S8+Nm3t+8o3qQceN81j6Vcjgzt/Y/n3Z6UkKeSlkn
Ila+cZI1oA==
=J/e4
-----END PGP SIGNATURE-----
Merge tag 'block-5.15-2021-10-17' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Bigger than usual for this point in time, the majority is fixing some
issues around BDI lifetimes with the move from the request_queue to
the disk in this release. In detail:
- Series on draining fs IO for del_gendisk() (Christoph)
- NVMe pull request via Christoph:
- fix the abort command id (Keith Busch)
- nvme: fix per-namespace chardev deletion (Adam Manzanares)
- brd locking scope fix (Tetsuo)
- BFQ fix (Paolo)"
* tag 'block-5.15-2021-10-17' of git://git.kernel.dk/linux-block:
block, bfq: reset last_bfqq_created on group change
block: warn when putting the final reference on a registered disk
brd: reduce the brd_devices_mutex scope
kyber: avoid q->disk dereferences in trace points
block: keep q_usage_counter in atomic mode after del_gendisk
block: drain file system I/O on del_gendisk
block: split bio_queue_enter from blk_queue_enter
block: factor out a blk_try_enter_queue helper
block: call submit_bio_checks under q_usage_counter
nvme: fix per-namespace chardev deletion
block/rnbd-clt-sysfs: fix a couple uninitialized variable bugs
nvme-pci: Fix abort command id
-----BEGIN PGP SIGNATURE-----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=4wXI
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.15-2021-10-17' of git://git.kernel.dk/linux-block
Pull io_uring fix from Jens Axboe:
"Just a single fix for a wrong condition for grabbing a lock, a
regression in this merge window"
* tag 'io_uring-5.15-2021-10-17' of git://git.kernel.dk/linux-block:
io_uring: fix wrong condition to grab uring lock
Fixes up some issues in rc5.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmFm1OcPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpp0AIAL5lvwd/Dzj0trDEOm93yTiKigkllJ9if8pF
G3V6IgyyeNujmEJLD2Fz5GPUVXg5G2+Yh2xgf8OP4syS/pZoCGkGcLIoo7lJRSvz
D3KpNYrZ2O1kFw2XWP3p7O/H8pxWAMPjykRaVoniCd+rIIpRzWdYBDDWConUGqC1
IlB5BS6cv3vRIoJ4Ac3YVOEUM4WOw/2fwzxejVjxQdNjgbWL0JBY1IBiJrfp7iEo
L3KRmN25JWCwE0x+Ehy6/uSalVzPgjESBYzrBFihnFXDS/LIIIXuRb9Q3HzEFFHT
UhccuExc8Nq8JDKWrZkYP2s950Gnv249bC9tqlHHTnoE+pxG3Ms=
=i68W
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Fixes up some issues in rc5"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-vdpa: Fix the wrong input in config_cb
VDUSE: fix documentation underline warning
Revert "virtio-blk: Add validation for block size in config space"
vhost_vdpa: unset vq irq before freeing irq
virtio: write back F_VERSION_1 before validate
Fix a bug where guests on P9 with interrupts passed through could get stuck in
synchronize_irq().
Fix a bug in KVM on P8 where secondary threads entering a guest would write outside their
allocated stack.
Fix a bug in KVM on P8 where secondary threads could confuse the host offline code and
cause the guest or host to crash.
Thanks to: Cédric Le Goater
-----BEGIN PGP SIGNATURE-----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=fPMr
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a bug where guests on P9 with interrupts passed through could get
stuck in synchronize_irq().
- Fix a bug in KVM on P8 where secondary threads entering a guest would
write outside their allocated stack.
- Fix a bug in KVM on P8 where secondary threads could confuse the host
offline code and cause the guest or host to crash.
Thanks to Cédric Le Goater.
* tag 'powerpc-5.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Make idle_kvm_start_guest() return 0 if it went to guest
KVM: PPC: Book3S HV: Fix stack handling in idle_kvm_start_guest()
powerpc/xive: Discard disabled interrupts in get_irqchip_state()
trigger a safety check in elftoolchain's implementation of libelf
- Do not add garbage data to the .rela.orc_unwind_ip section
-----BEGIN PGP SIGNATURE-----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=tiWi
-----END PGP SIGNATURE-----
Merge tag 'objtool_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Update section headers before the respective relocations to not
trigger a safety check in elftoolchain's implementation of libelf
- Do not add garbage data to the .rela.orc_unwind_ip section
* tag 'objtool_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Update section header before relocations
objtool: Check for gelf_update_rel[a] failures
-----BEGIN PGP SIGNATURE-----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=yLQd
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Add Sapphire Rapids to the list of CPUs supporting the SMI count MSR
* tag 'perf_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/msr: Add Sapphire Rapids CPU support
Low priority fixes but fixes nonetheless:
- update stub diagnostic print that is no longer accurate
- avoid statically allocated buffer for CPER error record decoding
- avoid sleeping on the efi_runtime semaphore when calling the
ResetSystem EFI runtime service
-----BEGIN PGP SIGNATURE-----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=+LOo
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Borislav Petkov:
"Forwarded from Ard Biesheuvel through the tip tree. Ard will send
stuff directly in the near future.
Low priority fixes but fixes nonetheless:
- update stub diagnostic print that is no longer accurate
- avoid statically allocated buffer for CPER error record decoding
- avoid sleeping on the efi_runtime semaphore when calling the
ResetSystem EFI runtime service"
* tag 'efi-urgent-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Change down_interruptible() in virt_efi_reset_system() to down_trylock()
efi/cper: use stack buffer for error record decoding
efi/libstub: Simplify "Exiting bootservices" message
shortcomings of some platforms, leading to boot failures.
- Mask out invalid bits in the MXCSR for 32-bit kernels again because
Thomas and I don't know how to mask out bits properly. Third time's the
charm.
-----BEGIN PGP SIGNATURE-----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=dZ4h
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Do not enable AMD memory encryption in Kconfig by default due to
shortcomings of some platforms, leading to boot failures.
- Mask out invalid bits in the MXCSR for 32-bit kernels again because
Thomas and I don't know how to mask out bits properly. Third time's
the charm.
* tag 'x86_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Mask out the invalid MXCSR bits properly
x86/Kconfig: Do not enable AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT automatically
Here are some small driver core fixes for 5.15-rc6, all of which have
been in linux-next for a while with no reported issues.
They include:
- kernfs negative dentry bugfix
- simple pm bus fixes to resolve reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYWvzFg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymfLQCfSCP698AAvoCgG0fOfLakFkw80h0AoKIVm3lk
t0GUdnplU18CjnO5M1Zj
=+dh9
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes for 5.15-rc6, all of which have
been in linux-next for a while with no reported issues.
They include:
- kernfs negative dentry bugfix
- simple pm bus fixes to resolve reported issues"
* tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: bus: Delete CONFIG_SIMPLE_PM_BUS
drivers: bus: simple-pm-bus: Add support for probing simple bus only devices
driver core: Reject pointless SYNC_STATE_ONLY device links
kernfs: don't create a negative dentry if inactive node exists
Here are some small char/misc driver fixes for 5.15-rc6 for reported
issues that include:
- habanalabs driver fixes
- mei driver fixes and new ids
- fpga new device ids
- MAINTAINER file updates for fpga subsystem
- spi module id table additions and fixes
- fastrpc locking fixes
- nvmem driver fix
All of these have been in linux-next for a while with no reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYWvx9w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynubwCfWU41jVfRmRE507eZckXsUGCx1s0An02XSSWD
O7ar19Sz+EzRo6KXsyDd
=A0x7
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for 5.15-rc6 for reported
issues that include:
- habanalabs driver fixes
- mei driver fixes and new ids
- fpga new device ids
- MAINTAINER file updates for fpga subsystem
- spi module id table additions and fixes
- fastrpc locking fixes
- nvmem driver fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
eeprom: 93xx46: fix MODULE_DEVICE_TABLE
nvmem: Fix shift-out-of-bound (UBSAN) with byte size cells
mei: hbm: drop hbm responses on early shutdown
mei: me: add Ice Lake-N device id.
eeprom: 93xx46: Add SPI device ID table
eeprom: at25: Add SPI ID table
misc: HI6421V600_IRQ should depend on HAS_IOMEM
misc: fastrpc: Add missing lock before accessing find_vma()
cb710: avoid NULL pointer subtraction
misc: gehc: Add SPI ID table
MAINTAINERS: Drop outdated FPGA Manager website
MAINTAINERS: Add Hao and Yilun as maintainers
habanalabs: fix resetting args in wait for CS IOCTL
fpga: ice40-spi: Add SPI device ID table
Here are a number of small IIO and staging driver fixes for 5.15-rc6.
They include:
- vc04_services bugfix for reported problem
- r8188eu array underflow fix
- iio driver fixes for a lot of tiny reported issues.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYWvzpQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl7PwCbB+MK0TAt0m5HWtDwWOx7b5EabHEAnRuKfda9
sD8JEQSfPyz9Fi27QFEo
=I3re
-----END PGP SIGNATURE-----
Merge tag 'staging-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver fixes from Greg KH:
"Here are a number of small IIO and staging driver fixes for 5.15-rc6.
They include:
- vc04_services bugfix for reported problem
- r8188eu array underflow fix
- iio driver fixes for a lot of tiny reported issues.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: prevent array underflow in rtw_hal_update_ra_mask()
staging: vc04_services: shut up out-of-range warning
iio: light: opt3001: Fixed timeout error when 0 lux
iio: adis16480: fix devices that do not support sleep mode
iio: mtk-auxadc: fix case IIO_CHAN_INFO_PROCESSED
iio: adis16475: fix deadlock on frequency set
iio: ssp_sensors: add more range checking in ssp_parse_dataframe()
iio: ssp_sensors: fix error code in ssp_print_mcu_debug()
iio: adc: ad7793: Fix IRQ flag
iio: adc: ad7780: Fix IRQ flag
iio: adc: ad7192: Add IRQ flag
iio: adc: aspeed: set driver data when adc probe.
iio: adc: rzg2l_adc: add missing clk_disable_unprepare() in rzg2l_adc_pm_runtime_resume()
iio: adc: max1027: Fix the number of max1X31 channels
iio: adc: max1027: Fix wrong shift with 12-bit devices
iio: adc128s052: Fix the error handling path of 'adc128_probe()'
iio: adc: rzg2l_adc: Fix -EBUSY timeout error return
iio: accel: fxls8962af: return IRQ_HANDLED when fifo is flushed
iio: dac: ti-dac5571: fix an error code in probe()
Here is a single 8250 Kconfig fix for 5.15-rc6 that resolves a
regression that showed up in 5.15-rc1. It has been in linux-next for a
while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYWv0Mg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykeJgCfT8mYR7xo2iTzFRqfvarzH1hvIIgAn3HGUFNf
K3cV5OyOc9lZnGKYhYE6
=SMH1
-----END PGP SIGNATURE-----
Merge tag 'tty-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fix from Greg KH:
"Here is a single 8250 Kconfig fix for 5.15-rc6 that resolves a
regression that showed up in 5.15-rc1. It has been in linux-next for a
while with no reported issues"
* tag 'tty-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250: allow disabling of Freescale 16550 compile test
Here are some small USB fixes that resolve a number of tiny issues.
They include:
- new USB serial driver ids
- xhci driver fixes for a bunch of issues
- musb error path fixes.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYWv03Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yntlQCfYoF02t7nt8lErdO/QUy3eXPbYAYAn2cWDHyb
CJ9hCFXyQWHnJsFdwLIm
=0DSY
-----END PGP SIGNATURE-----
Merge tag 'usb-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes that resolve a number of tiny issues.
They include:
- new USB serial driver ids
- xhci driver fixes for a bunch of issues
- musb error path fixes.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: musb: dsps: Fix the probe error path
xhci: Enable trust tx length quirk for Fresco FL11 USB controller
xhci: Fix command ring pointer corruption while aborting a command
USB: xhci: dbc: fix tty registration race
xhci: add quirk for host controllers that don't update endpoint DCS
xhci: guard accesses to ep_state in xhci_endpoint_reset()
USB: serial: qcserial: add EM9191 QDL support
USB: serial: option: add Quectel EC200S-CN module support
USB: serial: option: add prod. id for Quectel EG91
USB: serial: option: add Telit LE910Cx composition 0x1204
Pull input fixes from Dmitry Torokhov:
- a new product ID for the xpad joystick driver
- fixes to resistive-adc-touch and snvs_pwrkey drivers
- a change to touchscreen helpers to make clang happier
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: touchscreen - avoid bitwise vs logical OR warning
Input: xpad - add support for another USB ID of Nacon GC-100
Input: resistive-adc-touch - fix division by zero error on z1 == 0
Input: snvs_pwrkey - add clk handling
Since commit 430a67f9d6 ("block, bfq: merge bursts of newly-created
queues"), BFQ maintains a per-group pointer to the last bfq_queue
created. If such a queue, say bfqq, happens to move to a different
group, then bfqq is no more a valid last bfq_queue created for its
previous group. That pointer must then be cleared. Not resetting such
a pointer may also cause UAF, if bfqq happens to also be freed after
being moved to a different group. This commit performs this missing
reset. As such it fixes commit 430a67f9d6 ("block, bfq: merge bursts
of newly-created queues").
Such a missing reset is most likely the cause of the crash reported in [1].
With some analysis, we found that this crash was due to the
above UAF. And such UAF did go away with this commit applied [1].
Anyway, before this commit, that crash happened to be triggered in
conjunction with commit 2d52c58b9c ("block, bfq: honor already-setup
queue merges"). The latter was then reverted by commit ebc69e897e
("Revert "block, bfq: honor already-setup queue merges""). Yet commit
2d52c58b9c ("block, bfq: honor already-setup queue merges") contains
no error related with the above UAF, and can then be restored.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=214503
Fixes: 430a67f9d6 ("block, bfq: merge bursts of newly-created queues")
Tested-by: Grzegorz Kowal <custos.mentis@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20211015144336.45894-2-paolo.valente@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Warn when the last reference on a live disk is put without calling
del_gendisk first. There are some BDI related bug reports that look
like a case of this, so make sure we have the proper instrumentation
to catch it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211014130231.1468538-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As with commit 8b52d8be86 ("loop: reorder loop_exit"),
unregister_blkdev() needs to be called first in order to avoid calling
brd_alloc() from brd_probe() after brd_del_one() from brd_exit(). Then,
we can avoid holding global mutex during add_disk()/del_gendisk() as with
commit 1c500ad706 ("loop: reduce the loop_ctl_mutex scope").
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/e205f13d-18ff-a49c-0988-7de6ea5ff823@i-love.sakura.ne.jp
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Fix 'perf test evsel' build error on !x86 architectures.
- Fix libperf's test_stat_cpu mixup of CPU numbers and CPU indexes.
- Output offsets for decompressed records, not just useless zeros.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYWq4ZAAKCRCyPKLppCJ+
JyRdAQD1iZFc0g9GLL0n50Q6HJCAFDLfufbkTpYiPPTFhemDRgD9Em5IvOAW6Zhv
9xLhduRa0DfTe/NIxz82bjSD4BvuzQw=
=JBso
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.15-2021-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix 'perf test evsel' build error on !x86 architectures
- Fix libperf's test_stat_cpu mixup of CPU numbers and CPU indexes
- Output offsets for decompressed records, not just useless zeros
* tag 'perf-tools-fixes-for-v5.15-2021-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
libperf tests: Fix test_stat_cpu
libperf test evsel: Fix build error on !x86 architectures
perf report: Output non-zero offset for decompressed records
