Commit Graph

706739 Commits

Author SHA1 Message Date
Alexei Starovoitov
324bda9e6c bpf: multi program support for cgroup+bpf
introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple
bpf programs to a cgroup.

The difference between three possible flags for BPF_PROG_ATTACH command:
- NONE(default): No further bpf programs allowed in the subtree.
- BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program,
  the program in this cgroup yields to sub-cgroup program.
- BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program,
  that cgroup program gets run in addition to the program in this cgroup.

NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't
change their behavior. It only clarifies the semantics in relation
to new flag.

Only one program is allowed to be attached to a cgroup with
NONE or BPF_F_ALLOW_OVERRIDE flag.
Multiple programs are allowed to be attached to a cgroup with
BPF_F_ALLOW_MULTI flag. They are executed in FIFO order
(those that were attached first, run first)
The programs of sub-cgroup are executed first, then programs of
this cgroup and then programs of parent cgroup.
All eligible programs are executed regardless of return code from
earlier programs.

To allow efficient execution of multiple programs attached to a cgroup
and to avoid penalizing cgroups without any programs attached
introduce 'struct bpf_prog_array' which is RCU protected array
of pointers to bpf programs.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
for cgroup bits
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04 16:05:05 -07:00
Eric Dumazet
c818fa9e28 net: cache skb_shinfo() in skb_try_coalesce()
Compiler does not really know that skb_shinfo(to|from) are constants
in skb_try_coalesce(), lets cache their values to shrink code.

We might even take care of skb_zcopy() calls later.

$ size net/core/skbuff.o.before net/core/skbuff.o
   text	   data	    bss	    dec	    hex	filename
  40727	   1298	      0	  42025	   a429	net/core/skbuff.o.before
  40631	   1298	      0	  41929	   a3c9	net/core/skbuff.o

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04 11:34:14 -07:00
Florian Westphal
e9b871ee09 selftests: rtnetlink: try concurrent change of ifalias
to make sure this is serialized correctly.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04 10:33:59 -07:00
Florian Westphal
5c45121dc3 rtnetlink: remove __rtnl_af_unregister
switch the only caller to rtnl_af_unregister.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04 10:33:59 -07:00
Florian Westphal
e774d96b7d rtnetlink: remove slave_validate callback
no users in the tree.

Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04 10:33:59 -07:00
Colin Ian King
ebf6b13142 cxgb4vf: make a couple of functions static
The functions t4vf_link_down_rc_str and t4vf_handle_get_port_info are
local to the source and do not need to be in global scope, so make
them static.

Cleans up sparse warnings:
symbol 't4vf_link_down_rc_str' was not declared. Should it be static?
symbol 't4vf_handle_get_port_info' was not declared. Should it be static?

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04 10:31:55 -07:00
Florian Westphal
20e883204f net: core: fix kerneldoc comment
net/core/dev.c:1306: warning: No description found for parameter 'name'
net/core/dev.c:1306: warning: Excess function parameter 'alias' description in 'dev_get_alias'

Fixes: 6c5570016b ("net: core: decouple ifalias get/set from rtnl lock")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04 10:28:22 -07:00
Simon Horman
4d86d38186 ravb: RX checksum offload
Add support for RX checksum offload. This is enabled by default and
may be disabled and re-enabled using ethtool:

 # ethtool -K eth0 rx off
 # ethtool -K eth0 rx on

The RAVB provides a simple checksumming scheme which appears to be
completely compatible with CHECKSUM_COMPLETE: sum of all packet data after
the L2 header is appended to packet data; this may be trivially read by the
driver and used to update the skb accordingly.

In terms of performance throughput is close to gigabit line-rate both with
and without RX checksum offload enabled. Perf output, however, appears to
indicate that significantly less time is spent in do_csum(). This is as
expected.

Test results with RX checksum offload enabled:
 # /usr/bin/perf_3.16 record -o /run/perf.data -a netperf -t TCP_MAERTS -H 10.4.3.162
 MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.4.3.162 () port 0 AF_INET : demo
 enable_enobufs failed: getprotobyname
 Recv   Send    Send
 Socket Socket  Message  Elapsed
 Size   Size    Size     Time     Throughput
 bytes  bytes   bytes    secs.    10^6bits/sec

  87380  16384  16384    10.00     937.54

 Summary of output of perf report:
    18.28%      ksoftirqd/0  [kernel.kallsyms]  [k] _raw_spin_unlock_irqrestore
    10.34%      ksoftirqd/0  [kernel.kallsyms]  [k] __pi_memcpy
     9.83%      ksoftirqd/0  [kernel.kallsyms]  [k] ravb_poll
     7.89%      ksoftirqd/0  [kernel.kallsyms]  [k] skb_put
     4.01%      ksoftirqd/0  [kernel.kallsyms]  [k] dev_gro_receive
     3.37%          netperf  [kernel.kallsyms]  [k] __arch_copy_to_user
     3.17%          swapper  [kernel.kallsyms]  [k] arch_cpu_idle
     2.55%          swapper  [kernel.kallsyms]  [k] tick_nohz_idle_enter
     2.04%      ksoftirqd/0  [kernel.kallsyms]  [k] __pi___inval_dcache_area
     2.03%          swapper  [kernel.kallsyms]  [k] _raw_spin_unlock_irq
     1.96%      ksoftirqd/0  [kernel.kallsyms]  [k] __netdev_alloc_skb
     1.59%      ksoftirqd/0  [kernel.kallsyms]  [k] __slab_alloc.isra.83

Test results without RX checksum offload enabled:
 # /usr/bin/perf_3.16 record -o /run/perf.data -a netperf -t TCP_MAERTS -H 10.4.3.162
 MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.4.3.162 () port 0 AF_INET : demo
 enable_enobufs failed: getprotobyname
 Recv   Send    Send
 Socket Socket  Message  Elapsed
 Size   Size    Size     Time     Throughput
 bytes  bytes   bytes    secs.    10^6bits/sec

  87380  16384  16384    10.00     940.20

 Summary of output of perf report:
    17.10%    ksoftirqd/0  [kernel.kallsyms]  [k] _raw_spin_unlock_irqrestore
    10.99%    ksoftirqd/0  [kernel.kallsyms]  [k] __pi_memcpy
     8.87%    ksoftirqd/0  [kernel.kallsyms]  [k] ravb_poll
     8.16%    ksoftirqd/0  [kernel.kallsyms]  [k] skb_put
     7.42%    ksoftirqd/0  [kernel.kallsyms]  [k] do_csum
     3.91%    ksoftirqd/0  [kernel.kallsyms]  [k] dev_gro_receive
     2.31%        swapper  [kernel.kallsyms]  [k] arch_cpu_idle
     2.16%    ksoftirqd/0  [kernel.kallsyms]  [k] __pi___inval_dcache_area
     2.14%    ksoftirqd/0  [kernel.kallsyms]  [k] __netdev_alloc_skb
     1.93%        netperf  [kernel.kallsyms]  [k] __arch_copy_to_user
     1.79%        swapper  [kernel.kallsyms]  [k] tick_nohz_idle_enter
     1.63%    ksoftirqd/0  [kernel.kallsyms]  [k] __slab_alloc.isra.83

Above results collected on an R-Car Gen 3 Salvator-X/r8a7796 ES1.0.
Also tested on a R-Car Gen 3 Salvator-X/r8a7795 ES1.0.

By inspection this also appears to be compatible with the ravb found
on R-Car Gen 2 SoCs, however, this patch is currently untested on such
hardware.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04 10:26:05 -07:00
Ganesh Goudar
acd669a8f6 cxgb4: add new T6 pci device id's
Add 0x6085 T6 device id.

Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 21:42:39 -07:00
David S. Miller
26873308b2 Merge branch 'sctp-stream-schedulers'
Marcelo Ricardo Leitner says:

====================
Introduce SCTP Stream Schedulers

This patchset introduces the SCTP Stream Schedulers are defined by
https://tools.ietf.org/html/draft-ietf-tsvwg-sctp-ndata-13

It provides 3 schedulers at the moment: FCFS, Priority and Round Robin.
The other 3, Round Robin per packet, Fair Capacity and Weighted Fair
Capacity will be added later. More specifically, WFQ is required by
WebRTC Datachannels.

The draft also defines the idata chunk, allowing a usermsg to be
interrupted by another piece of idata from another stream. This patchset
*doesn't* include it. It will be posted later by Xin Long.  Its
integration with this patchset is very simple and it basically only
requires a tweak in sctp_sched_dequeue_done(), to ignore datamsg
boundaries.

The first 5 patches are a preparation for the next ones. The most
relevant patches are the 4th and 6th ones. More details are available on
each patch.

v2: changelog update on patch 3
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 16:27:29 -07:00
Marcelo Ricardo Leitner
ac1ed8b82c sctp: introduce round robin stream scheduler
This patch introduces RFC Draft ndata section 3.2 Priority Based
Scheduler (SCTP_SS_RR).

Works by maintaining a list of enqueued streams and tracking the last
one used to send data. When the datamsg is done, it switches to the next
stream.

See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-sctp-ndata-13
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 16:27:29 -07:00
Marcelo Ricardo Leitner
637784ade2 sctp: introduce priority based stream scheduler
This patch introduces RFC Draft ndata section 3.4 Priority Based
Scheduler (SCTP_SS_PRIO).

It works by having a struct sctp_stream_priority for each priority
configured. This struct is then enlisted on a queue ordered per priority
if, and only if, there is a stream with data queued, so that dequeueing
is very straightforward: either finish current datamsg or simply dequeue
from the highest priority queued, which is the next stream pointed, and
that's it.

If there are multiple streams assigned with the same priority and with
data queued, it will do round robin amongst them while respecting
datamsgs boundaries (when not using idata chunks), to be reasonably
fair.

We intentionally don't maintain a list of priorities nor a list of all
streams with the same priority to save memory. The first would mean at
least 2 other pointers per priority (which, for 1000 priorities, that
can mean 16kB) and the second would also mean 2 other pointers but per
stream. As SCTP supports up to 65535 streams on a given asoc, that's
1MB. This impacts when giving a priority to some stream, as we have to
find out if the new priority is already being used and if we can free
the old one, and also when tearing down.

The new fields in struct sctp_stream_out_ext and sctp_stream are added
under a union because that memory is to be shared with other schedulers.

See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-sctp-ndata-13
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 16:27:29 -07:00
Marcelo Ricardo Leitner
0ccdf3c7fd sctp: add sockopt to get/set stream scheduler parameters
As defined per RFC Draft ndata Section 4.3.3, named as
SCTP_STREAM_SCHEDULER_VALUE.

See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-sctp-ndata-13
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 16:27:29 -07:00
Marcelo Ricardo Leitner
13aa8770fe sctp: add sockopt to get/set stream scheduler
As defined per RFC Draft ndata Section 4.3.2, named as
SCTP_STREAM_SCHEDULER.

See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-sctp-ndata-13
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 16:27:29 -07:00
Marcelo Ricardo Leitner
5bbbbe32a4 sctp: introduce stream scheduler foundations
This patch introduces the hooks necessary to do stream scheduling, as
per RFC Draft ndata.  It also introduces the first scheduler, which is
what we do today but now factored out: first come first served (FCFS).

With stream scheduling now we have to track which chunk was enqueued on
which stream and be able to select another other than the in front of
the main outqueue. So we introduce a list on sctp_stream_out_ext
structure for this purpose.

We reuse sctp_chunk->transmitted_list space for the list above, as the
chunk cannot belong to the two lists at the same time. By using the
union in there, we can have distinct names for these moments.

sctp_sched_ops are the operations expected to be implemented by each
scheduler. The dequeueing is a bit particular to this implementation but
it is to match how we dequeue packets today. We first dequeue and then
check if it fits the packet and if not, we requeue it at head. Thus why
we don't have a peek operation but have dequeue_done instead, which is
called once the chunk can be safely considered as transmitted.

The check removed from sctp_outq_flush is now performed by
sctp_stream_outq_migrate, which is only called during assoc setup.
(sctp_sendmsg() also checks for it)

The only operation that is foreseen but not yet added here is a way to
signalize that a new packet is starting or that the packet is done, for
round robin scheduler per packet, but is intentionally left to the
patch that actually implements it.

Support for I-DATA chunks, also described in this RFC, with user message
interleaving is straightforward as it just requires the schedulers to
probe for the feature and ignore datamsg boundaries when dequeueing.

See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-sctp-ndata-13
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 16:27:29 -07:00
Marcelo Ricardo Leitner
2fc019f790 sctp: introduce sctp_chunk_stream_no
Add a helper to fetch the stream number from a given chunk.

Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 16:27:28 -07:00
Marcelo Ricardo Leitner
f952be79ce sctp: introduce struct sctp_stream_out_ext
With the stream schedulers, sctp_stream_out will become too big to be
allocated by kmalloc and as we need to allocate with BH disabled, we
cannot use __vmalloc in sctp_stream_init().

This patch moves out the stats from sctp_stream_out to
sctp_stream_out_ext, which will be allocated only when the application
tries to sendmsg something on it.

Just the introduction of sctp_stream_out_ext would already fix the issue
described above by splitting the allocation in two. Moving the stats
to it also reduces the pressure on the allocator as we will ask for less
memory atomically when creating the socket and we will use GFP_KERNEL
later.

Then, for stream schedulers, we will just use sctp_stream_out_ext.

Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 16:27:28 -07:00
Marcelo Ricardo Leitner
1fdb8d8fef sctp: factor out stream->in allocation
There is 1 place allocating it and another reallocating. Move such
procedures to a common function.

v2: updated changelog

Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 16:27:28 -07:00
Marcelo Ricardo Leitner
e090abd0d8 sctp: factor out stream->out allocation
There is 1 place allocating it and 2 other reallocating. Move such
procedures to a common function.

Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 16:27:28 -07:00
Marcelo Ricardo Leitner
1ae2eaaa22 sctp: silence warns on sctp_stream_init allocations
As SCTP supports up to 65535 streams, that can lead to very large
allocations in sctp_stream_init(). As Xin Long noticed, systems with
small amounts of memory are more prone to not have enough memory and
dump warnings on dmesg initiated by user actions. Thus, silence them.

Also, if the reallocation of stream->out is not necessary, skip it and
keep the memory we already have.

Reported-by: Xin Long <lucien.xin@gmail.com>
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 16:27:28 -07:00
David S. Miller
af14827fa3 Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:

====================
100GbE Intel Wired LAN Driver Updates 2017-10-03

This series contains updates to fm10k only.

Jake provides majority of the changes in this series, starting with using
fm10k_prepare_for_reset() if we lose PCIe link.  Before we would detach
the device and close the netdev, which left a lot of items still active,
such as the Tx/Rx resources.  This could cause problems where register
reads would return potentially invalid values and would result in unknown
driver behavior, so call fm10k_prepare_for_reset() much like we do for
suspend/resume cycles.  This will attempt to shutdown as much as possible
to prevent possible issues.  Then replaced the PCI specific legacy power
management hooks with the new generic power management hooks for both
suspend and hibernate.  Introduced a workqueue item which monitors a
queue of MAC and VLAN requests since a large number of MAC address or
VLAN updates at once can overload the mailbox with too many messages at
once.  Fixed a cppcheck warning by properly declaring the min_rate and
max_rate variables in the declaration and definition for .ndo_set_vf_bw,
rather than using "unused" for the minimum rates.

Joe Perches fixes the backward logic when using net_ratelimit().
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 16:25:05 -07:00
Florian Westphal
6c5570016b net: core: decouple ifalias get/set from rtnl lock
Device alias can be set by either rtnetlink (rtnl is held) or sysfs.

rtnetlink hold the rtnl mutex, sysfs acquires it for this purpose.
Add an extra mutex for it and use rcu to protect concurrent accesses.

This allows the sysfs path to not take rtnl and would later allow
to not hold it when dumping ifalias.

Based on suggestion from Eric Dumazet.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 15:56:01 -07:00
Mahesh Bandewar
4d2c0cda07 bonding: speed/duplex update at NETDEV_UP event
Some NIC drivers don't have correct speed/duplex settings at the
time they send NETDEV_UP notification and that messes up the
bonding state. Especially 802.3ad mode which is very sensitive
to these settings. In the current implementation we invoke
bond_update_speed_duplex() when we receive NETDEV_UP, however,
ignore the return value. If the values we get are invalid
(UNKNOWN), then slave gets removed from the aggregator with
speed and duplex set to UNKNOWN while link is still marked as UP.

This patch fixes this scenario. Also 802.3ad mode is sensitive to
these conditions while other modes are not, so making sure that it
doesn't change the behavior for other modes.

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 14:32:25 -07:00
Dan Carpenter
b5c7d4e54c mlxsw: spectrum: Add missing error code on allocation failure
We accidentally return success if the kmalloc_array() call fails.

Fixes: 0e14c7777a ("mlxsw: spectrum: Add the multicast routing hardware logic")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 10:26:58 -07:00
Dan Carpenter
b508e0b6e4 mlxsw: spectrum: Fix check for IS_ERR() instead of NULL
mlxsw_afa_block_create() doesn't return error pointers, it returns NULL
on error.

Fixes: 0e14c7777a ("mlxsw: spectrum: Add the multicast routing hardware logic")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 10:26:58 -07:00
Colin Ian King
360cc342c9 net: dsa: mt7530: make functions mt7530_phy_write static
The function mt7530_phy_write is local to the source and does not need to
be in global scope, so make it static.

Cleans up sparse warnings:
symbol 'mt7530_phy_write' was not declared. Should it be static?

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 10:20:12 -07:00
Colin Ian King
161ae6b04d net: dsa: lan9303: make functions lan9303_mdio_phy_{read|write} static
The functions lan9303_mdio_phy_write and lan9303_mdio_phy_read are local
to the source and do not need to be in global scope, so make them static.

Cleans up sparse warnings:
symbol 'lan9303_mdio_phy_write' was not declared. Should it be static?
symbol 'lan9303_mdio_phy_read' was not declared. Should it be static?

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 10:20:12 -07:00
David S. Miller
da885b614a Merge branch 'mlxsw-mc-route-offload'
Jiri Pirko says:

====================
mlxsw: Add support for partial multicast route offload

Yotam says:

Previous patchset introduced support for offloading multicast MFC routes to
the Spectrum hardware. As described in that patchset, no partial offloading
is supported, i.e if a route has one output interface which is not a valid
offloadable device (e.g. pimreg device, dummy device, management NIC), the
route is trapped to the CPU and the forwarding is done in slow-path.

Add support for partial offloading of multicast routes, by letting the
hardware to forward the packet to all the in-hardware devices, while the
kernel ipmr module will continue forwarding to all other interfaces.

Similarly to the bridge, the kernel ipmr module will forward a marked
packet to an interface only if the interface has a different parent ID than
the packet's ingress interfaces.

The first patch introduces the offload_mr_fwd_mark skb field, which can be
used by offloading drivers to indicate that a packet had already gone
through multicast forwarding in hardware, similarly to the offload_fwd_mark
field that indicates that a packet had already gone through L2 forwarding
in hardware.

Patches 2 and 3 change the ipmr module to not forward packets that had
already been forwarded by the hardware, i.e. packets that are marked with
offload_mr_fwd_mark and the ingress VIF shares the same parent ID with the
egress VIF.

Patches 4, 5, 6 and 7 add the support in the mlxsw Spectrum driver for trap
and forward routes, while marking the trapped packets with the
offload_mr_fwd_mark.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 10:06:31 -07:00
Yotam Gigi
f60c254998 mlxsw: spectrum: mr: Support trap-and-forward routes
Add the support of trap-and-forward route action in the multicast routing
offloading logic. A route will be set to trap-and-forward action if one (or
more) of its output interfaces is not offload-able, i.e. does not have a
valid Spectrum RIF.

This way, a route with mixed output VIFs list, which contains both
offload-able and un-offload-able devices can go through partial offloading
in hardware, and the rest will be done in the kernel ipmr module.

Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 10:06:30 -07:00
Yotam Gigi
607feadef8 mlxsw: spectrum: mr_tcam: Add trap-and-forward multicast route
In addition to the current multicast route actions, which include trap
route action and a forward route action, add the trap-and-forward multicast
route action, and implement it in the multicast routing hardware logic.

To implement that, add a trap-and-forward ACL action as the last action in
the route flexible action set. The used trap is the ACL2 trap, which marks
the packets with offload_mr_forward_mark, to prevent the packet from being
forwarded again by the kernel.

Note: At that stage the offloading logic does not support trap-and-forward
multicast routes. This patch adds the support only in the hardware logic.

Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 10:06:30 -07:00
Yotam Gigi
a0040c8c93 mlxsw: spectrum: Add trap for multicast trap-and-forward routes
When a multicast route is configured with trap-and-forward action, the
packets should be marked with skb->offload_mr_fwd_mark, in order to prevent
the packets from being forwarded again by the kernel ipmr module.

Due to this, it is not possible to use the already existing multicast trap
(MLXSW_TRAP_ID_ACL1) as the packet should be marked differently. Add the
MLXSW_TRAP_ID_ACL2 which is for trap-and-forward multicast routes, and set
the offload_mr_fwd_mark skb field in its handler.

Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 10:06:30 -07:00
Yotam Gigi
2678724355 mlxsw: acl: Introduce ACL trap and forward action
Use trap/discard flex action to implement trap and forward. The action will
later be used for multicast routing, as the multicast routing mechanism is
done using ACL flexible actions in Spectrum hardware. Using that action, it
will be possible to implement a trap-and-forward route.

Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 10:06:30 -07:00
Yotam Gigi
a5bc9294d7 ipv4: ipmr: Don't forward packets already forwarded by hardware
Change the ipmr module to not forward packets if:
 - The packet is marked with the offload_mr_fwd_mark, and
 - Both input interface and output interface share the same parent ID.

This way, a packet can go through partial multicast forwarding in the
hardware, where it will be forwarded only to the devices that share the
same parent ID (AKA, reside inside the same hardware). The kernel will
forward the packet to all other interfaces.

To do this, add the ipmr_offload_forward helper, which per skb, ingress VIF
and egress VIF, returns whether the forwarding was offloaded to hardware.
The ipmr_queue_xmit frees the skb and does not forward it if the result is
a true value.

All the forwarding path code compiles out when the CONFIG_NET_SWITCHDEV is
not set.

Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 10:06:30 -07:00
Yotam Gigi
5d8b3e69fc ipv4: ipmr: Add the parent ID field to VIF struct
In order to allow the ipmr module to do partial multicast forwarding
according to the device parent ID, add the device parent ID field to the
VIF struct. This way, the forwarding path can use the parent ID field
without invoking switchdev calls, which requires the RTNL lock.

When a new VIF is added, set the device parent ID field in it by invoking
the switchdev_port_attr_get call.

Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 10:06:30 -07:00
Yotam Gigi
abf4bb6b63 skbuff: Add the offload_mr_fwd_mark field
Similarly to the offload_fwd_mark field, the offload_mr_fwd_mark field is
used to allow partial offloading of MFC multicast routes.

Switchdev drivers can offload MFC multicast routes to the hardware by
registering to the FIB notification chain. When one of the route output
interfaces is not offload-able, i.e. has different parent ID, the route
cannot be fully offloaded by the hardware. Examples to non-offload-able
devices are a management NIC, dummy device, pimreg device, etc.

Similar problem exists in the bridge module, as one bridge can hold
interfaces with different parent IDs. At the bridge, the problem is solved
by the offload_fwd_mark skb field.

Currently, when a route cannot go through full offload, the only solution
for a switchdev driver is not to offload it at all and let the packet go
through slow path.

Using the offload_mr_fwd_mark field, a driver can indicate that a packet
was already forwarded by hardware to all the devices with the same parent
ID as the input device. Further patches in this patch-set are going to
enhance ipmr to skip multicast forwarding to devices with the same parent
ID if a packets is marked with that field.

The reason why the already existing "offload_fwd_mark" bit cannot be used
is that a switchdev driver would want to make the distinction between a
packet that has already gone through L2 forwarding but did not go through
multicast forwarding, and a packet that has already gone through both L2
and multicast forwarding.

For example: when a packet is ingressing from a switchport enslaved to a
bridge, which is configured with multicast forwarding, the following
scenarios are possible:
 - The packet can be trapped to the CPU due to exception while multicast
   forwarding (for example, MTU error). In that case, it had already gone
   through L2 forwarding in the hardware, thus A switchdev driver would
   want to set the skb->offload_fwd_mark and not the
   skb->offload_mr_fwd_mark.
 - The packet can also be trapped due to a pimreg/dummy device used as one
   of the output interfaces. In that case, it can go through both L2 and
   (partial) multicast forwarding inside the hardware, thus a switchdev
   driver would want to set both the skb->offload_fwd_mark and
   skb->offload_mr_fwd_mark.

Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellaox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 10:06:30 -07:00
Arjun Vynipadath
a047fbae23 cxgb4: Update comment for min_mtu
We have lost a comment for minimum mtu value set for netdevice with
'commit d894be57ca ("ethernet: use net core MTU range checking in
more drivers"). Updating it accordingly.

Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 09:55:41 -07:00
Jacob Keller
3e256ac5b1 fm10k: fix mis-ordered parameters in declaration for .ndo_set_vf_bw
We've had support for setting both a minimum and maximum bandwidth via
.ndo_set_vf_bw since commit 883a9ccbae ("fm10k: Add support for SR-IOV
to driver", 2014-09-20).

Likely because we do not support minimum rates, the declaration
mis-ordered the "unused" parameter, which causes warnings when analyzed
with cppcheck.

Fix this warning by properly declaring the min_rate and max_rate
variables in the declaration and definition (rather than using
"unused"). Also rename "rate" to max_rate so as to clarify that we only
support setting the maximum rate.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-03 09:00:04 -07:00
Jacob Keller
87be98927e fm10k: prefer %s and __func__ for diagnostic prints
Don't hard code the function names in the diagnostic output when these
reset related routines fail. Instead, use %s and __func__ so that future
refactors don't need to change the print outs.

Additionally, while we are here, add missing function header comments
for the new reset_prepare and reset_done function handlers.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-03 08:55:20 -07:00
Joe Perches
c0ad8ef3df fm10k: Fix misuse of net_ratelimit()
Correct the backward logic using !net_ratelimit()

Miscellanea:

o Add a blank line before the error return label

Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-03 08:51:27 -07:00
Jacob Keller
ef57ab791c fm10k: bump version number
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-03 08:49:52 -07:00
Jacob Keller
1f5c27e528 fm10k: use the MAC/VLAN queue for VF<->PF MAC/VLAN requests
Now that we have a working MAC/VLAN queue for handling MAC/VLAN messages
from the netdev, replace the default handler for the VF<->PF messages.
This new handler is very similar to the default code, but uses the
MAC/VLAN queue instead of sending the message directly. Unfortunately we
can't easily re-use the default code, so we'll just replace the entire
function.

This ensures that a VF requesting a large number of VLANs or MAC
addresses does not start a reset cycle, as explained in the commit which
introduced the message queue.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Ngai-mint Kwan <ngai-mint.kwan@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-03 08:39:17 -07:00
Jacob Keller
fc9173682d fm10k: introduce a message queue for MAC/VLAN messages
Under some circumstances, when dealing with a large number of MAC
address or VLAN updates at once, the fm10k driver, particularly the VFs
can overload the mailbox with too many messages at once.

This results in a mailbox timeout, which causes the driver to initiate
a reset. During the reset, we re-send all the same messages that
originally caused the timeout. This results in a cycle of resets each
triggering a future reset.

To fix or avoid this, we introduce a workqueue item which monitors
a queue of MAC and VLAN requests. These requests are queued to the end
of the list, and we process as a FIFO periodically.

Initially we only handle requests for the netdev, but we do handle
unicast MAC addresses, multicast MAC addresses, and update VLAN
requests.

A future patch will add support to use this queue for handling MAC
update requests from the VF<->PF mailbox.

The MAC/VLAN work item will keep checking to make sure that each request
does not overflow the mailbox and cause a timeout. If it might, then the
work item will reschedule itself a short time later. This avoids any
reset cycle, since we never send the message if the mailbox is not
ready.

As an alternative, we tried increasing the mailbox message FIFO, but
this just delays the problem and results in needless memory waste on the
system. Our new message queue is dynamically allocated so only uses as
much memory as it needs. Additionally, it need not be contiguous like
the Tx and Rx FIFOs.

Note that this patch chose to only create a queue for MAC and VLAN
messages, since these are the only messages sent in a large enough
volume to cause the reset loop. Other messages are very unlikely to
overflow the mailbox Tx FIFO so easily.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-03 08:25:36 -07:00
Jacob Keller
8249c47c6b fm10k: use generic PM hooks instead of legacy PCIe power hooks
Replace the PCI specific legacy power management hooks with the new
generic power management hooks which work properly for both suspend and
hibernate. The new generic system is better and properly handles the
lower level PCIe power management rather than forcing the driver to
handle it.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-03 08:19:33 -07:00
Jacob Keller
b4fcd43661 fm10k: use spinlock to implement mailbox lock
Lets not re-invent the locking wheel. Remove our bitlock and use
a proper spinlock instead.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-03 08:12:44 -07:00
Jacob Keller
0b40f45748 fm10k: prepare_for_reset() when we lose PCIe Link
If we lose PCIe link, such as when an unannounced PFLR event occurs, or
when a device is surprise removed, we currently detach the device and
close the netdev. This unfortunately leaves a lot of things still
active, such as the msix_mbx_pf IRQ, and Tx/Rx resources.

This can cause problems because the register reads will return
potentially invalid values which may result in unknown driver behavior.

Begin the process of resetting using fm10k_prepare_for_reset(), much in
the same way as the suspend and resume cycle does. This will attempt to
shutdown as much as possible, in order to prevent possible issues.

A naive implementation for this has issues, because there are now
multiple flows calling the reset logic and setting a reset bit. This
would cause problems, because the "re-attach" routine might call
fm10k_handle_reset() prior to the reset actually finishing. Instead,
we'll add state bits to indicate which flow actually initiated the
reset.

For the general reset flow, we'll assume that if someone else is
resetting that we do not need to handle it at all, so it does not need
its own state bit. For the suspend case, we will simply issue a warning
indicating that we are attempting to recover from this case when
resuming.

For the detached subtask, we'll simply refuse to re-attach until we've
actually initiated a reset as part of that flow.

Finally, we'll stop attempting to manage the mailbox subtask when we're
detached, since there's nothing we can do if we don't have a PCIe
address.

Overall this produces a much cleaner shutdown and recovery cycle for
a PCIe surprise remove event.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-03 08:06:44 -07:00
David S. Miller
4efac6ff4d Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2017-10-02

This series contains updates to i40e and i40evf.

Shannon Nelson fixes an issue where when a machine has more CPUs than
queue pairs, the counting gets a "little funky" and turns off Flow
Director.  So to correct it, limit the number of LAN queues initially
allocated to be sure there are some left for Flow Director and other
features.

Lihong cleans up dead code by removing a condition check which cannot
ever be true.

Christophe Jaillet fixes a potential NULL pointer dereference, which
could happen if kzalloc() fails.

Filip corrects the reporting of supported link modes, which was incorrect
for some NICs.  Added support for 'ethtool -m' command, which displays
information about QSFP+ modules.

Mariusz adds functions to read/write the LED registers to control the
LEDS, instead of accessing the registers directly whenever the LEDs
need to be controlled.

Jake fixes a regression where we introduced a scheduling while atomic,
so introduce a separate helper function which will manage its own need
for the mac_filter_hash_lock.  Also cleaned up the "PF" parameter in
i40e_vc_disable_vf() since it is never used and is not needed.  Fixed
a rare case where it is possible that a reset does not occur when
i40e_vc_disable_vf() is called, so modify i40e_reset_vf() to return a
bool to indicate whether it reset or not so that i40e_vc_disable_vf()
can wait until a reset actually occurs.

Alan adds the ability for the VF to request more or less underlying
allocated queues from the PF.  Fixes the incorrect method for clearing
the vf_states variable with a NULL assignment, when we should be
using atomic bitops since we don't actually want to clear all the
flags.  Fixed a resource leak, where the PF driver fails to inform
clients of a VF reset because we were incorrectly checking the
I40E_VF_STATE_PRE_ENABLE bit.

Mitch converts i40evf_map_rings_to_vectors() to a void function since
it cannot fail and allows us to clean up the checks for the function
return value.

Scott enables the driver(s) to pass traffic with VLAN tags using the
802.1ad Ethernet protocol.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02 15:16:03 -07:00
Scott Peterson
ab243ec940 i40e: Stop dropping 802.1ad tags - eth proto 0x88a8
Enable i40e to pass traffic with VLAN tags using the 802.1ad ethernet
protocol ID (0x88a8).

This requires NIC firmware providing version 1.7 of the API. With
older NIC firmware 802.1ad tagged packets will continue to be dropped.

No VLAN offloads nor RSS are supported for 802.1ad VLANs.

Signed-off-by: Scott Peterson <scott.d.peterson@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-02 12:46:36 -07:00
Alan Brady
c53d11f669 i40e: fix client notify of VF reset
Currently there is a bug in which the PF driver fails to inform clients
of a VF reset which then causes clients to leak resources.  The bug
exists because we were incorrectly checking the I40E_VF_STATE_PRE_ENABLE
bit.

When a VF is first init we go through a reset to initialize variables
and allocate resources but we don't want to inform clients of this first
reset since the client isn't fully enabled yet so we set a state bit
signifying we're in a "pre-enabled" client state.  During the first
reset we should be clearing the bit, allowing all following resets to
notify the client of the reset when the bit is not set.  This patch
fixes the issue by negating the 'test_and_clear_bit' check to accurately
reflect the behavior we want.

Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-02 12:46:36 -07:00
Alan Brady
41d0a4d0c8 i40e: fix handling of vf_states variable
Currently we inappropriately clear the vf_states variable with a null
assignment.  This is problematic because we should be using atomic
bitops on this variable and we don't actually want to clear all the
flags.  We should just clear the ones we know we want to clear.
Additionally remove the I40E_VF_STATE_FCOEENA bit because it is no
longer being used.

Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-02 12:46:35 -07:00
Mitch Williams
1b7b7596ae i40e: make i40evf_map_rings_to_vectors void
This function cannot fail, so why is it returning a value? And why are
we checking it? Why shouldn't we just make it void? Why is this commit
message made up of only questions?

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-02 12:46:35 -07:00