Name the debugfs directory after the DPNI object instead of the netdev
name since this can be changed after probe by udev rules.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the DPNI object is connected to a DPMAC, setup the of_node to point
to the DTS device node of that specific MAC. This enables other drivers,
for example the DSA subsystem, to find the net_device by its device
node.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean says:
====================
Ethtool statistics counters cleanup for SJA1105 DSA driver
This series removes some reported data from ethtool -S which were not
counters at all, and reorganizes the code such that counters can be read
individually and not just all at once.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The current internal sja1105 driver API is optimized for retrieving many
statistics counters at once. But the switch does not do atomic snapshotting
for them anyway.
In case we start reporting the hardware port counters through
ndo_get_stats64 as well, not just ethtool, it would be good to be able
to read individual port counters and not all of them.
Additionally, since Arnd Bergmann's commit ae1804de93 ("dsa: sja1105:
dynamically allocate stats structure"), sja1105_get_ethtool_stats
allocates memory dynamically, since struct sja1105_port_status was
deemed to consume too much stack memory. That is not ideal.
The large structure is only needed because of the burst read.
If we read statistics one by one, we can consume less memory, and
we can avoid dynamic allocation.
Additionally, latency-sensitive interfaces such as PTP operations (for
phc2sys) might suffer if the SPI mutex is being held for too long, which
happens in the case of SPI burst reads. By reading counters one by one,
we give a chance for higher priority processes to preempt and take the
SPI bus mutex for accessing the PTP clock.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The queue levels are not counters, but instead they represent the
occupancy of the MAC TX queues. Having these in ethtool port counters is
not helpful, so remove them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the unlikely event that rule_cnt is zero the variable ret is
not assigned a value and function hclge_dbg_dump_fd_tcam can end
up returning an unitialized value in ret. Fix this by explicitly
setting ret to zero before the for-loop.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: b5a0b70d77 ("net: hns3: refactor dump fd tcam of debugfs")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the following kernel build warning when CONFIG_SFC_SRIOV is disabled:
drivers/net/ethernet/sfc/farch.c: In function ‘efx_farch_dimension_resources’:
drivers/net/ethernet/sfc/farch.c:1671:21: warning: variable ‘buftbl_min’ set but not used [-Wunused-but-set-variable]
unsigned vi_count, buftbl_min, total_tx_channels;
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
s/becase/because/
s/reqeusts/requests/
s/funcions/functions/
s/addreses/addresses/
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
s/patckets/packets/
s/avilable/available/
s/tbe/the/
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang says:
====================
net: wan: clean up some code style issues
This patchset clean up some code style issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Macro argument 'card' and 'port' may be better as
'(card)' and '(port)' to avoid precedence issues.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Braces {} should be used on all arms of this statement.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes some redundant blank lines.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Trailing statements should be on next line.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add space required after that close brace '}'.
Add space required before the open parenthesis '('.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the checkpatch error as "foo* bar" should be "foo *bar".
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean says:
====================
Adapt the sja1105 DSA driver to the SPI controller's transfer limits
This series changes the SPI transfer procedure in sja1105 to take into
consideration the buffer size limitations that the SPI controller driver
might have.
Changes in v2:
Remove the driver's use of cs_change and send multiple, smaller SPI
messages instead of a single large one.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The static config of the sja1105 switch is a long stream of bytes which
is programmed to the hardware in chunks (portions with the chip select
continuously asserted) of max 256 bytes each. Each chunk is a
spi_message composed of 2 spi_transfers: the buffer with the data and a
preceding buffer with the SPI access header.
Only that certain SPI controllers, such as the spi-sc18is602 I2C-to-SPI
bridge, cannot keep the chip select asserted for that long.
The spi_max_transfer_size() and spi_max_message_size() functions are how
the controller can impose its hardware limitations upon the SPI
peripheral driver.
For the sja1105 driver to work with these controllers, both buffers must
be smaller than the transfer limit, and their sum must be smaller than
the message limit.
Regression-tested on a switch connected to a controller with no
limitations (spi-fsl-dspi) as well as with one with caps for both
max_transfer_size and max_message_size (spi-sc18is602).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sja1105 driver has been described by Mark Brown as "not using the
[ SPI ] API at all idiomatically" due to the use of cs_change:
https://patchwork.kernel.org/project/netdevbpf/patch/20210520135031.2969183-1-olteanv@gmail.com/
According to include/linux/spi/spi.h, the chip select is supposed to be
asserted for the entire length of a SPI message, as long as cs_change is
false for all member transfers. The cs_change flag changes the following:
(i) When a non-final SPI transfer has cs_change = true, the chip select
should temporarily deassert and then reassert starting with the next
transfer.
(ii) When a final SPI transfer has cs_change = true, the chip select
should remain asserted until the following SPI message.
The sja1105 driver only uses cs_change for its first property, to form a
single SPI message whose layout can be seen below:
this is an entire, single spi_message
_______________________________________________________________________________________________
/ \
+-------------+---------------+-------------+---------------+ ... +-------------+---------------+
| hdr_xfer[0] | chunk_xfer[0] | hdr_xfer[1] | chunk_xfer[1] | | hdr_xfer[n] | chunk_xfer[n] |
+-------------+---------------+-------------+---------------+ ... +-------------+---------------+
cs_change false true false true false false
____________________________ _____________________________ _____________________________
CS line __/ \/ \ ... / \__
The fact of the matter is that spi_max_message_size() has an ambiguous
meaning if any non-final transfer has cs_change = true.
If the SPI master has a limitation in that it cannot keep the chip
select asserted for more than, say, 200 bytes (like the spi-sc18is602),
the normal thing for it to do is to implement .max_transfer_size and
.max_message_size, and limit both to 200: in the "worst case" where
cs_change is always false, then the controller can, indeed, not send
messages larger than 200 bytes.
But the fact that the SPI controller's max_message_size does not
necessarily mean that we cannot send messages larger than that.
Notably, if the SPI master special-cases the transfers with cs_change
and treats every chip select toggling as an entirely new transaction,
then a SPI message can easily exceed that limit. So there is a
temptation to ignore the controller's reported max_message_size when
using cs_change = true in non-final transfers.
But that can lead to false conclusions. As Mark points out, the SPI
controller might have a different kind of limitation with the max
message size, that has nothing at all to do with how long it can keep
the chip select asserted.
For example, that might be the case if the device is able to offload the
chip select changes to the hardware as part of the data stream, and it
packs the entire stream of commands+data (corresponding to a SPI
message) into a single DMA transfer that is itself limited in size.
So the only thing we can do is avoid ambiguity by not using cs_change at
all. Instead of sending a single spi_message, we now send multiple SPI
messages as follows:
spi_message 0 spi_message 1 spi_message n
____________________________ ___________________________ _____________________________
/ \ / \ / \
+-------------+---------------+-------------+---------------+ ... +-------------+---------------+
| hdr_xfer[0] | chunk_xfer[0] | hdr_xfer[1] | chunk_xfer[1] | | hdr_xfer[n] | chunk_xfer[n] |
+-------------+---------------+-------------+---------------+ ... +-------------+---------------+
cs_change false true false true false false
____________________________ _____________________________ _____________________________
CS line __/ \/ \ ... / \__
which is clearer because the max_message_size limit is now easier to
enforce. What is transmitted on the wire stays, of course, the same.
Additionally, because we send no more than 2 transfers at a time, we now
avoid dynamic memory allocation too, which might be seen as an
improvement by some.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a driver for the Motorcomm yt8511 phy that will be used in the
production Pine64 rk3566-quartz64 development board.
It supports gigabit transfer speeds, rgmii, and 125mhz clk output.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Printing kernel pointers is discouraged because they might leak kernel
memory layout. This fixes smatch warning:
drivers/net/ethernet/xilinx/xilinx_emaclite.c:1191 xemaclite_of_probe() warn:
argument 4 to %08lX specifier is cast from pointer
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use DEVICE_ATTR_RW helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use DEVICE_ATTR_RO helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use DEVICE_ATTR_RO helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When there is no devlink device, the following command will return:
$ devlink -j dev show
{dev:{}}
This will cause IndexError when trying to access the first element
in dev of this json dataset. Use the kselftest framework skip code
to skip this test in this case.
Example output with this change:
# selftests: net: devlink_port_split.py
# no devlink device was found, test skipped
ok 7 selftests: net: devlink_port_split.py # SKIP
Link: https://bugs.launchpad.net/bugs/1928889
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This way the compiler warns when a new value is added to the enum but
not to the string translation like:
drivers/net/ethernet/ibm/ibmvnic.c: In function 'adapter_state_to_string':
drivers/net/ethernet/ibm/ibmvnic.c:832:2: warning: enumeration value 'VNIC_FOOBAR' not handled in switch [-Wswitch]
switch (state) {
^~~~~~
drivers/net/ethernet/ibm/ibmvnic.c: In function 'reset_reason_to_string':
drivers/net/ethernet/ibm/ibmvnic.c:1935:2: warning: enumeration value 'VNIC_RESET_FOOBAR' not handled in switch [-Wswitch]
switch (reason) {
^~~~~~
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Acked-by: Lijun Pan <lijunp213@gmail.com>
Link: https://lore.kernel.org/netdev/CAOhMmr701LecfuNM+EozqbiTxFvDiXjFdY2aYeKJYaXq9kqVDg@mail.gmail.com/
Signed-off-by: David S. Miller <davem@davemloft.net>
assign vlue (EIO/EPROTO) to variable r, and goto exit label,
but just return r follow exit label, so we delete exit label,
and just replace with return sentence.
Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang says:
====================
net: bonding: clean up some code style issues
This patchset cleans up some code style issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Code indent should use tabs where possible, so
use tabs instead of space for code indent.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Braces {} are not necessary for single statement blocks,
so remove these braces {}.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix incorrect code indent for conditional statements.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add some blank lines after declarations as required.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
1GbE Intel Wired LAN Driver Updates 2021-05-20
This series contains updates to igc driver only.
Andre Guedes says:
This series adds AF_XDP zero-copy feature to igc driver.
The initial patches do some code refactoring, preparing the code base to
land the AF_XDP zero-copy feature, avoiding code duplications. The last
patches of the series are the ones implementing the feature.
The last patch which indeed implements AF_XDP zero-copy support was
originally way too lengthy so, for the sake of code review, I broke it
up into two patches: one adding support for the RX functionality and the
other one adding TX support.
---
v2:
Patch 8/9 - "igc: Enable RX via AF_XDP zero-copy"
* In XDP_PASS flow, copy metadata too into the skb.
* When HW timestamp is added by the NIC, after copying it into
a local variable, update xdp_buff->data_meta so that
metadata length when XDP program is called 0.
* In igc_xdp_enable_pool(), call xsk_pool_dma_unmap() on
failure.
Known issues:
When an XDP application is running in Tx-Only mode with Zero-Copy
enabled, it is not expected to add the frames to the fill-queue. I have
noticed the following two issues in this scenario:
- If XDP_USE_NEED_WAKEUP flag is not set by application, igc_poll()
will go into infinite loop because the buffer allocation resulting
in igc_clean_rx_irq_zc() indicating that all work is not done and NAPI
should keep polling. This does not occur if XDP_USE_NEED_WAKEUP
flag is set.
- Since there are no buffers allocated by userspace for the fill
queue, there is no memory allocated for the NIC to copy the data
to. If the packet received is destined to the hardware queue where
XDP application is running, no packets are received even on other
queues.
Both these issues can be mitigated by adding a few frames to the
fill queue. The second issue can also be mitigated by making sure no
packets are being received on the hardware queue where Rx is running.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Tang says:
====================
net: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.[ch]' | xargs sed -r -i 's/^[ ]+\t/\t/'
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running
the following commard:
$ find . -name '*.[ch]' | xargs sed -r -i 's/^[ ]+\t/\t/'
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running
the following commard:
$ find . -name '*.[ch]' | xargs sed -r -i 's/^[ ]+\t/\t/'
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running
the following commard:
$ find . -name '*.[ch]' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running
the following commard:
$ find . -name '*.[ch]' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running
the following commard:
$ find . -name '*.[ch]' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running
the following commard:
$ find . -name '*.[ch]' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Tom Parkin <tparkin@katalix.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running
the following commard:
$ find . -name '*.[ch]' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running
the following commard:
$ find . -name '*.[ch]' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running
the following commard:
$ find . -name '*.[ch]' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Xie He <xie.he.0141@gmail.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan says:
====================
net: hns3: refactor some debugfs commands
This series refactors the debugfs command to the new
process and removes the useless debugfs file node cmd
for the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, all debugfs commands have been reconstructed, and the
debugfs file node cmd is useless. So remove this debugfs file node.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the debugfs command for serv info is implemented by
"echo xxxx > cmd", and record the inforamtion in dmesg. It's
unnecessary and heavy. To improve it, create a single file
"serv_info" for it, and query it by command "cat serv_info",
return the result to userspace, rather than record in dmesg.
The display style is below:
$ cat service_task_info
local_clock: [ 114.203321]
delta: 784(ms)
last_service_task_processed: 4294918512(jiffies)
last_service_task_cnt: 4
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the debugfs command for dump mac tnl status is
implemented by "echo xxxx > cmd", and record the information
in dmesg. It's unnecessary and heavy. To improve it, create
a single file "mac_tnl_status" for it, and query it by command
"cat mac_tnl_status", return the result to userspace, rather
than record in dmesg.
The display style is below:
$ cat mac_tnl_status
Recently generated mac tnl interruption:
[0111204.175437] status = 0x30
[0154120.329912] status = 0x30
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, user gets qset shaper parameters by implementing debugfs
command "echo dump qs shaper > cmd", this command will dump info in
dmesg. It's unnecessary and heavy.
As there is "tm_qset" file in tm directory for dump qset info, to
optimize these command, merge qset shaper parameters to tm_qset
file and use cat command to get them.
The display style is below:
$ cat tm_qset
ID MAP_PRI LINK_VLD MODE DWRR IR_B IR_U IR_S BS_B BS_S FLAG
0000 0 1 dwrr 100 150 7 0 5 20 0
0001 0 0 sp 0 150 7 0 5 20 0
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
