The following warnings are seen with 'make dt_binding_check':
Documentation/devicetree/bindings/clock/arm,syscon-icst.example.dts:17.16-24.11: Warning (unit_address_vs_reg): /example-0/clock@00: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/clock/arm,syscon-icst.example.dts:17.16-24.11: Warning (unit_address_format): /example-0/clock@00: unit name should not have leading 0s
Fix them by removing the unneeded clock unit name.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Pull clk updates from Stephen Boyd:
"There's not much to see in the core framework this time around.
Instead the majority of the diff is the normal collection of driver
additions for new SoCs and non-critical clk data fixes and updates.
The framework must be middle aged.
The two biggest directories in the diffstat show that the Qualcomm and
Unisoc support added a handful of big drivers for new SoCs but that's
not really the whole story because those new drivers tend to add large
numbers of lines of clk data. There's a handful of AT91 clk drivers
added this time around too and a bunch of improvements to drivers like
the i.MX driver. All around lots of updates and fixes in various clk
drivers which is good to see.
The core framework has only one real major change which has been
baking in next for the past couple months. It fixes the framework so
that it stops caching a clk's phase when the phase clk_op returns an
error. Before this change we would consider some negative errno as a
phase and that just doesn't make sense.
Core:
- Don't show clk phase when it is invalid
New Drivers:
- Add support for Unisoc SC9863A clks
- Qualcomm SM8250 RPMh and MSM8976 RPM clks
- Qualcomm SM8250 Global Clock Controller (GCC) support
- Qualcomm SC7180 Modem Clock Controller (MSS CC) support
- EHRPWM's TimeBase clock(TBCLK) for TI AM654 SoCs
- Support PMC clks on at91sam9n12, at91rm9200, sama5d3, and
at91sam9g45 SoCs
Updates:
- GPU GX GDSC support on Qualcomm sc7180
- Fixes and improvements for the Marvell MMP2/MMP3 SoC clk drivers
- A series from Anson to convert i.MX8 clock bindings to json-schema
- Update i.MX pll14xx driver to include new frequency entries for
pll1443x table, and return error for invalid PLL type
- Add missing of_node_put() call for a number of i.MX clock drivers
- Drop flag CLK_IS_CRITICAL from 'A53_CORE' mux clock, as we already
have the flag on its child cpu clock
- Fix a53 cpu clock for i.MX8 drivers to get it source from ARM PLL
via CORE_SEL slice, and source from A53 CCM clk root when we need
to change ARM PLL frequency. Thus, we can support core running
above 1GHz safely
- Update i.MX pfdv2 driver to check zero rate and use determine_rate
for getting the best rate
- Add CLKO2 for imx8mm, SNVS clock for imx8mn, and PXP clock for
imx7d
- Remove PMC clks from Tegra clk driver
- Improved clock/reset handling for the Renesas R-Car USB2 Clock
Selector
- Conversion to json-schema of the Renesas CPG/MSSR DT bindings
- Add Crypto clocks on Renesas R-Car M3-W/W+, M3-N, E3, and D3
- Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car H3, M3-W/W+, and
M3-N
- Update Amlogic audio clock gate hierarchy for meson8 and gxbb
- Update Amlogic g12a spicc clock sources
- Support for Ingenic X1000 TCU clks"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (146 commits)
clk: sprd: fix to get a correct ibias of pll
dt-bindings: imx8mm-clock: Fix the file path
dt-bindings: imx8mq-clock: Fix the file path
clk: qcom: rpmh: Drop unnecessary semicolons
clk: qcom: rpmh: Simplify clk_rpmh_bcm_send_cmd()
clk: tegra: Use NULL for pointer initialization
clk: sprd: add clocks support for SC9863A
clk: sprd: support to get regmap from parent node
clk: sprd: Add macros for referencing parents without strings
clk: sprd: Add dt-bindings include file for SC9863A
dt-bindings: clk: sprd: add bindings for sc9863a clock controller
dt-bindings: clk: sprd: rename the common file name sprd.txt to SoC specific
clk: sprd: add gate for pll clocks
MAINTAINERS: dt: update reference for arm-integrator.txt
clk: mmp2: Fix bit masks for LCDC I/O and pixel clocks
clk: mmp2: Add clock for fifth SD HCI on MMP3
dt-bindings: marvell,mmp2: Add clock id for the fifth SD HCI on MMP3
clk: mmp2: Add clocks for the thermal sensors
dt-bindings: marvell,mmp2: Add clock ids for the thermal sensors
clk: mmp2: add the GPU clocks
...
- Add support for Unisoc SC9863A clks
- GPU GX GDSC support on Qualcomm sc7180
- Qualcomm SM8250 RPMh and MSM8976 RPM clks
- Qualcomm SM8250 Global Clock Controller (GCC) support
- Qualcomm SC7180 Modem Clock Controller (MSS CC) support
* clk-unisoc:
clk: sprd: fix to get a correct ibias of pll
clk: sprd: add clocks support for SC9863A
clk: sprd: support to get regmap from parent node
clk: sprd: Add macros for referencing parents without strings
clk: sprd: Add dt-bindings include file for SC9863A
dt-bindings: clk: sprd: add bindings for sc9863a clock controller
dt-bindings: clk: sprd: rename the common file name sprd.txt to SoC specific
clk: sprd: add gate for pll clocks
* clk-tegra:
clk: tegra: Use NULL for pointer initialization
clk: tegra: Remove audio clocks configuration from clock driver
clk: tegra: Remove tegra_pmc_clk_init along with clk ids
clk: tegra: Remove CLK_M_DIV fixed clocks
clk: tegra: Fix Tegra PMC clock out parents
clk: tegra: Add Tegra OSC to clock lookup
clk: tegra: Add support for OSC_DIV fixed clocks
dt-bindings: soc: tegra-pmc: Add ID for Tegra PMC 32 kHz blink clock
dt-bindings: soc: tegra-pmc: Add Tegra PMC clock bindings
dt-bindings: tegra: Convert Tegra PMC bindings to YAML
dt-bindings: clock: tegra: Add IDs for OSC clocks
* clk-qcom: (21 commits)
clk: qcom: rpmh: Drop unnecessary semicolons
clk: qcom: rpmh: Simplify clk_rpmh_bcm_send_cmd()
clk: qcom: gcc: Add USB3 PIPE clock and GDSC for SM8150
ipq806x: gcc: Added the enable regs and mask for PRNG
clk: qcom: Add modem clock controller driver for SC7180
clk: qcom: gcc: Add support for modem clocks in GCC
dt-bindings: clock: Add YAML schemas for the QCOM MSS clock bindings
clk: qcom: clk-rpm: add missing rpm clk for ipq806x
clk: qcom: gcc: Add global clock controller driver for SM8250
dt-bindings: clock: Add SM8250 GCC clock bindings
clk: qcom: clk-alpha-pll: Add support for controlling Lucid PLLs
clk: qcom: clk-alpha-pll: Refactor trion PLL
clk: qcom: clk-alpha-pll: Use common names for defines
dt-bindings: clock: rpmcc: Document msm8976 compatible
clk: qcom: smd: Add support for MSM8976 rpm clocks
clk: qcom: clk-rpmh: Wait for completion when enabling clocks
clk: qcom: rpmh: Add support for RPMH clocks on SM8250
dt-bindings: clock: Add RPMHCC bindings for SM8250
clk: qcom: alpha-pll: Make error prints more informative
clk: qcom: gpucc: Add support for GX GDSC for SC7180
...
* clk-imx: (43 commits)
dt-bindings: imx8mm-clock: Fix the file path
dt-bindings: imx8mq-clock: Fix the file path
clk: imx: clk-gate2: Pass the device to the register function
clk: imx7d: Add PXP clock
clk: imx8mq: A53 core clock no need to be critical
clk: imx8mp: A53 core clock no need to be critical
clk: imx8mm: A53 core clock no need to be critical
clk: imx8mn: A53 core clock no need to be critical
clk: imx: pllv4: use prepare/unprepare
clk: imx: pfdv2: determine best parent rate
clk: imx: pfdv2: switch to use determine_rate
clk: imx: Fix division by zero warning on pfdv2
clk: imx: clk-sscg-pll: Drop unnecessary initialization
clk: imx: pll14xx: Return error if pll type is invalid
clk: imx: imx8mp: fix a53 cpu clock
clk: imx: imx8mn: fix a53 cpu clock
clk: imx: imx8mm: fix a53 cpu clock
clk: imx: imx8mq: fix a53 cpu clock
clk: imx8mp: Rename the IMX8MP_CLK_HDMI_27M clock
clk: imx8mn: Remove unused includes
...
Setting 'additionalProperties: false' is frequently omitted, but is
important in order to check that there aren't extra undocumented
properties in a binding.
Ideally, we'd just add this automatically and make this the default, but
there's some cases where it doesn't work. For example, if a common
schema is referenced, then properties in the common schema aren't part
of what's considered for 'additionalProperties'. Also, sometimes there
are bus specific properties such as 'spi-max-frequency' that go into
bus child nodes, but aren't defined in the child node's schema.
So let's stick with the json-schema defined default and add
'additionalProperties: false' where needed. This will be a continual
review comment and game of wack-a-mole.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Stephen Boyd <sboyd@kernel.org> # clock
Acked-by: Lee Jones <lee.jones@linaro.org>
Currently the following warning is seen with 'make dt_binding_check':
Documentation/devicetree/bindings/clock/imx8mm-clock.yaml: $id: relative path/filename doesn't match actual path or filename
Fix it by removing the "bindings" directory from the file path.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lkml.kernel.org/r/20200326171933.13394-2-festevam@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Currently the following warning is seen with 'make dt_binding_check':
Documentation/devicetree/bindings/clock/imx8mq-clock.yaml: $id: relative path/filename doesn't match actual path or filename
Fix it by removing the "bindings" directory from the file path.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lkml.kernel.org/r/20200326171933.13394-1-festevam@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
As described above single-output clock provider should have
0 cells number, so let's fix it by using 0 as cells number.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the fixed-factor-clock binding to DT schema format using
json-schema.
While at that, fix a couple of small errors: make the file base name
match the compatible string, add an example and document the reg-names
property.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/20200309194254.29009-4-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Several DT references got broken due to txt->yaml conversion.
Those are auto-fixed by running:
scripts/documentation-file-ref-check --fix
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Refine i.MX8MN clock binding by removing useless content and
updating the example, it makes all i.MX8M SoCs' clock binding
aligned.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pull clk fixes from Stephen Boyd:
"A collection of fixes:
- Make of_clk.h self contained
- Fix new qcom DT bindings that just merged to match the DTS files
- Fix qcom clk driver to properly detect DFS clk frequencies
- Fix the ls1028a driver to not deref a pointer before assigning it"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
of: clk: Make <linux/of_clk.h> self-contained
clk: qcom: Use ARRAY_SIZE in videocc-sc7180 for parent clocks
clk: qcom: Get rid of the test clock for videocc-sc7180
dt-bindings: clock: Cleanup qcom,videocc bindings for sdm845/sc7180
clk: qcom: Use ARRAY_SIZE in gpucc-sc7180 for parent clocks
clk: qcom: Get rid of the test clock for gpucc-sc7180
dt-bindings: clock: Fix qcom,gpucc bindings for sdm845/sc7180/msm8998
clk: qcom: Use ARRAY_SIZE in dispcc-sc7180 for parent clocks
clk: qcom: Get rid of the test clock for dispcc-sc7180
clk: qcom: Get rid of fallback global names for dispcc-sc7180
dt-bindings: clock: Fix qcom,dispcc bindings for sdm845/sc7180
clk: qcom: rcg2: Don't crash if our parent can't be found; return an error
clk: ls1028a: fix a dereference of pointer 'parent' before a null check
dt-bindings: clk: qcom: Fix self-validation, split, and clean cruft
clk: qcom: Don't overwrite 'cfg' in clk_rcg2_dfs_populate_freq()
This makes the qcom,videocc bindings match the recent changes to the
dispcc and gpucc.
1. Switched to using "bi_tcxo" instead of "xo".
2. Adds a description for the XO clock. Not terribly important but
nice if it cleanly matches its cousins.
3. Updates the example to use the symbolic name for the RPMH clock and
also show that the real devices are currently using 2 address cells
/ size cells and fixes the spacing on the closing brace.
4. Split into 2 files. In this case they could probably share one
file, but let's be consistent.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lkml.kernel.org/r/20200203103049.v4.11.I27bbd90045f38cd3218c259526409d52a48efb35@changeid
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The qcom,gpucc bindings had a few problems with them:
1. When things were converted to yaml the name of the "gpll0 main"
clock got changed from "gpll0" to "gpll0_main". Change it back for
msm8998.
2. Apparently there is a push not to use purist aliases for clocks but
instead to just use the internal Qualcomm names. For sdm845 and
sc7180 (where the drivers haven't already been changed) move in
this direction.
Things were also getting complicated harder to deal with by jamming
several SoCs into one file. Splitting simplifies things.
Fixes: 5c6f3a36b9 ("dt-bindings: clock: Add YAML schemas for the QCOM GPUCC clock bindings")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lkml.kernel.org/r/20200203103049.v4.7.I513cd73b16665065ae6c22cf594d8b543745e28c@changeid
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The qcom,dispcc bindings had a few problems with them:
1. They didn't specify all the clocks that dispcc is a client of.
Specifically on sc7180 there are two clocks from the DSI PHY and
two from the DP PHY. On sdm845 there are actually two DSI PHYs
(each of which has two clocks) and an extra clock from the gcc.
These all need to be specified.
2. The sdm845.dtsi has existed for quite some time without specifying
the clocks. The Linux driver was relying on global names to match
things up. While we should transition things, it should be noted
in the bindings.
3. The names used the bindings for "xo" and "gpll0" didn't match the
names that QC used for these clocks internally and this was causing
confusion / difficulty with their code generation tools. Switched
to the internal names to simplify everyone's lives. It's not quite
as clean in a purist sense but it should avoid headaches. This
officially changes the binding, but that seems OK in this case.
Also note that I updated the example.
Fixes: 5d28e44ba6 ("dt-bindings: clock: Add YAML schemas for the QCOM DISPCC clock bindings")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lkml.kernel.org/r/20200203103049.v4.2.I0c4bbb0f75a0880cd4bd90d8b267271e2375e0d0@changeid
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Pull clk updates from Stephen Boyd:
"There are a few changes to the core framework this time around, in
addition to the normal collection of driver updates to support new
SoCs, fix incorrect data, and convert various drivers to clk_hw based
APIs.
In the core, we allow clk_ops::init() to return an error code now so
that we can fail clk registration if the callback does something like
fail to allocate memory. We also add a new "terminate" clk_op so that
things done in clk_ops::init() can be undone, e.g. free memory. We
also spit out a warning now when critical clks fail to enable and we
support changing clk rates and enable/disable state through debugfs
when developers compile the kernel themselves.
On the driver front, we get support for what seems like a lot of
Qualcomm and NXP SoCs given that those vendors dominate the diffstat.
There are a couple new drivers for Xilinx and Amlogic SoCs too. The
updates are all small things like fixing the way glitch free muxes
switch parents, avoiding div-by-zero problems, or fixing data like
parent names. See the updates section below for more details.
Finally, the "basic" clk types have been converted to support
specifying parents with clk_hw pointers. This work includes an
overhaul of the fixed-rate clk type to be more modern by using clk_hw
APIs.
Core:
- Let clk_ops::init() return an error code
- Add a clk_ops::terminate() callback to undo clk_ops::init()
- Warn about critical clks that fail to enable or prepare
- Support dangerous debugfs actions on clks with dead code
New Drivers:
- Support for Xilinx Versal platform clks
- Display clk controller on qcom sc7180
- Video clk controller on qcom sc7180
- Graphics clk controller on qcom sc7180
- CPU PLLs for qcom msm8916
- Move qcom msm8974 gfx3d clk to RPM control
- Display port clk support on qcom sdm845 SoCs
- Global clk controller on qcom ipq6018
- Add a driver for BCLK of Freescale SAI cores
- Add cam, vpe and sgx clock support for TI dra7
- Add aess clock support for TI omap5
- Enable clks for CPUfreq on Allwinner A64 SoCs
- Add Amlogic meson8b DDR clock controller
- Add input clocks to Amlogic meson8b controllers
- Add SPIBSC (SPI FLASH) clock on Renesas RZ/A2
- i.MX8MP clk driver support
Updates:
- Convert gpio, fixed-factor, mux, gate, divider basic clks to hw
based APIs
- Detect more PRMCU variants in ux500 driver
- Adjust the composite clk type to new way of describing clk parents
- Fixes for clk controllers on qcom msm8998 SoCs
- Fix gmac main clock for TI dra7
- Move TI dra7-atl clock header to correct location
- Fix hidden node name dependency on TI clkctrl clocks
- Fix Amlogic meson8b mali clock update using the glitch free mux
- Fix Amlogic pll driver division by zero at init
- Prepare for split of Renesas R-Car H3 ES1.x and ES2.0+ config
symbols
- Switch more i.MX clk drivers to clk_hw based APIs
- Disable non-functional divider between pll4_audio_div and
pll4_post_div on imx6q
- Fix watchdog2 clock name typo in imx7ulp clock driver
- Set CLK_GET_RATE_NOCACHE flag for DRAM related clocks on i.MX8M
SoCs
- Suppress bind attrs for i.MX8M clock driver
- Add a big comment in imx8qxp-lpcg driver to tell why
devm_platform_ioremap_resource() shouldn't be used for the driver
- A correction on i.MX8MN usb1_ctrl parent clock setting"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (140 commits)
dt/bindings: clk: fsl,plldig: Drop 'bindings' from schema id
clk: ls1028a: Fix warning on clamp() usage
clk: qoriq: add ls1088a hwaccel clocks support
clk: ls1028a: Add clock driver for Display output interface
dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings
clk: fsl-sai: new driver
dt-bindings: clock: document the fsl-sai driver
clk: composite: add _register_composite_pdata() variants
clk: qcom: rpmh: Sort OF match table
dt-bindings: fix warnings in validation of qcom,gcc.yaml
dt-binding: fix compilation error of the example in qcom,gcc.yaml
clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag
clk: zynqmp: Fix divider calculation
clk: zynqmp: Add support for get max divider
clk: zynqmp: Warn user if clock user are more than allowed
clk: zynqmp: Extend driver for versal
dt-bindings: clock: Add bindings for versal clock driver
clk: ti: clkctrl: Fix hidden dependency to node name
clk: ti: add clkctrl data dra7 sgx
clk: ti: omap5: Add missing AESS clock
...
The 'qcom,gcc.yaml' file failed self-validation (dt_binding_check)
because it required a property to be either (3 entries big),
(3 entries big), or (7 entries big), but not more than one of those
things. That didn't make a ton of sense.
This patch splits all of the exceptional device trees (AKA those that
would have needed if/then/else rules) from qcom,gcc.yaml. It also
cleans up some cruft found while doing that.
After this lands, this worked for me atop clk-next with just the known
error about msm8998:
for f in \
Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml \
Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml \
Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml \
Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml \
Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml \
Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml \
Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml \
Documentation/devicetree/bindings/clock/qcom,gcc.yaml; do \
ARCH=arm64 make dtbs_check DT_SCHEMA_FILES=$f; \
done
I then picked this patch atop linux-next (next-20200129) and ran:
# Delete broken yaml:
rm Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
ARCH=arm64 make dt_binding_check | grep 'clock/qcom'
...and that didn't seem to indicate problems.
Arbitrary decisions made (yell if you want changed):
- Left all the older devices (where clocks / clock-names weren't
specified) in a single file.
- Didn't make clocks "required" for msm8996 but left them as listed.
This seems a little weird but it matches the old binding.
Misc cleanups as part of this patch:
- Fixed schema id to not have "bindings/" as per Rob [1].
- Listed include files as per Stephen.
- sm8150 was claimed to be same set of clocks as sc7180, but driver
and dts appear to say that "bi_tcxo_ao" doesn't exist. Fixed.
- In "apq8064", "#thermal-sensor-cells" was missing the "#".
- Got rid of "|" at the end of top description since spacing doesn't
matter.
- Changed indentation to consistently 2 spaces (it was 3 in some
places).
- Added period at the end of protected-clocks description.
- No space before ":".
- Updated sc7180/sm8150 example to use the 'qcom,rpmh.h' include.
- Updated sc7180/sm8150 example to use larger address/size cells as
per reality.
- Updated sc7180/sm8150 example to point to the sleep_clk rather than
<0>.
- Made it so that gcc-ipq8074 didn't require #power-domain-cells since
actual dts didn't have it and I got no hits from:
git grep _GDSC include/dt-bindings/clock/qcom,gcc-ipq8074.h
- Made it so that gcc-qcs404 didn't require #power-domain-cells since
actual dts didn't have it and I got no hits from:
git grep _GDSC include/dt-bindings/clock/qcom,gcc-qcs404.h
Noticed, but not done in this patch (volunteers needed):
- Add "aud_ref_clk" to sm8150 bindings / dts even though I found a
reference to it in "gcc-sm8150.c".
- Fix node name in actual ipq8074 to be "clock-controller" (it's gcc).
- Since the example doesn't need phandes to exist, in msm8998 could
just make up places providing some of the clocks currently bogused
out with <0>.
- On msm8998 clocks are listed as required but current dts doesn't
have them.
[1] https://lore.kernel.org/r/CAL_Jsq+_2E-bAbP9F6VYkWRp0crEyRGa5peuwP58-PZniVny7w@mail.gmail.com
Fixes: ab91f72e01 ("clk: qcom: gcc-msm8996: Fix parent for CLKREF clocks")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lkml.kernel.org/r/20200203094843.v3.1.I4452dc951d7556ede422835268742b25a18b356b@changeid
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
- Support for Xilinx Versal platform clks
- Display clk controller on qcom sc7180
- Video clk controller on qcom sc7180
- Graphics clk controller on qcom sc7180
- CPU PLLs for qcom msm8916
- Fixes for clk controllers on qcom msm8998 SoCs
- Move qcom msm8974 gfx3d clk to RPM control
- Display port clk support on qcom sdm845 SoCs
- Global clk controller on qcom ipq6018
- Adjust composite clk to new way of describing clk parents
- Add a driver for BCLK of Freescale SAI cores
* clk-imx: (32 commits)
clk: imx: Add support for i.MX8MP clock driver
dt-bindings: imx: Add clock binding doc for i.MX8MP
clk: imx: gate4: Switch imx_clk_gate4_flags() to clk_hw based API
clk: imx: imx8mq: Switch to clk_hw based API
clk: imx: imx8mm: Switch to clk_hw based API
clk: imx: imx8mn: Switch to clk_hw based API
clk: imx: Remove __init for imx_obtain_fixed_clk_hw() API
clk: imx: gate3: Switch to clk_hw based API
clk: imx: add hw API imx_clk_hw_mux2_flags
clk: imx: add imx_unregister_hw_clocks
clk: imx: clk-composite-8m: Switch to clk_hw based API
clk: imx: clk-pll14xx: Switch to clk_hw based API
clk: imx7up: Rename the clks to hws
clk: imx: Rename the imx_clk_divider_gate to imply it's clk_hw based
clk: imx: Rename the imx_clk_pfdv2 to imply it's clk_hw based
clk: imx: Rename the imx_clk_pllv4 to imply it's clk_hw based
clk: imx: Rename sccg and frac pll register to suggest clk_hw
clk: imx: imx7ulp composite: Rename to show is clk_hw based
clk: imx: pllv2: Switch to clk_hw based API
clk: imx: pllv1: Switch to clk_hw based API
...
* clk-ti:
clk: ti: clkctrl: Fix hidden dependency to node name
clk: ti: add clkctrl data dra7 sgx
clk: ti: omap5: Add missing AESS clock
clk: ti: dra7: fix parent for gmac_clkctrl
clk: ti: dra7: add vpe clkctrl data
clk: ti: dra7: add cam clkctrl data
dt-bindings: clock: Move ti-dra7-atl.h to dt-bindings/clock
* clk-xilinx:
clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag
clk: zynqmp: Fix divider calculation
clk: zynqmp: Add support for get max divider
clk: zynqmp: Warn user if clock user are more than allowed
clk: zynqmp: Extend driver for versal
dt-bindings: clock: Add bindings for versal clock driver
* clk-nvidia:
clk: tegra20/30: Explicitly set parent clock for Video Decoder
clk: tegra20/30: Don't pre-initialize displays parent clock
clk: tegra: divider: Check UART's divider enable-bit state on rate's recalculation
clk: tegra: clk-dfll: Remove call to pm_runtime_irq_safe()
clk: tegra: Mark fuse clock as critical
* clk-qcom: (35 commits)
clk: qcom: rpmh: Sort OF match table
dt-bindings: fix warnings in validation of qcom,gcc.yaml
dt-binding: fix compilation error of the example in qcom,gcc.yaml
clk: qcom: Add ipq6018 Global Clock Controller support
clk: qcom: Add DT bindings for ipq6018 gcc clock controller
clk: qcom: gcc-msm8996: Fix parent for CLKREF clocks
clk: qcom: rpmh: Add IPA clock for SC7180
clk: qcom: rpmh: skip undefined clocks when registering
clk: qcom: Add video clock controller driver for SC7180
dt-bindings: clock: Introduce SC7180 QCOM Video clock bindings
dt-bindings: clock: Add YAML schemas for the QCOM VIDEOCC clock bindings
clk: qcom: Add graphics clock controller driver for SC7180
dt-bindings: clock: Introduce SC7180 QCOM Graphics clock bindings
dt-bindings: clock: Add YAML schemas for the QCOM GPUCC clock bindings
clk: qcom: apcs-msm8916: use clk_parent_data to specify the parent
clk: qcom: Add display clock controller driver for SC7180
dt-bindings: clock: Introduce QCOM sc7180 display clock bindings
dt-bindings: clock: Add YAML schemas for the QCOM DISPCC clock bindings
clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibration
clk: qcom: alpha-pll: Remove useless read from set rate
...
* clk-freescale:
clk: fsl-sai: new driver
dt-bindings: clock: document the fsl-sai driver
clk: composite: add _register_composite_pdata() variants
* clk-qoriq:
clk: qoriq: add ls1088a hwaccel clocks support
clk: ls1028a: Add clock driver for Display output interface
dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings
- Support dangerous debugfs actions on clks with dead code
- Convert gpio, fixed-factor, mux, gate, divider basic clks to hw based APIs
* clk-debugfs-danger:
clk: Add support for setting clk_rate via debugfs
* clk-basic-hw:
clk: divider: Add support for specifying parents via DT/pointers
clk: gate: Add support for specifying parents via DT/pointers
clk: mux: Add support for specifying parents via DT/pointers
clk: asm9260: Use parent accuracy in fixed rate clk
clk: fixed-rate: Document that accuracy isn't a rate
clk: fixed-rate: Add clk flags for parent accuracy
clk: fixed-rate: Add support for specifying parents via DT/pointers
clk: fixed-rate: Document accuracy member
clk: fixed-rate: Move to_clk_fixed_rate() to C file
clk: fixed-rate: Remove clk_register_fixed_rate_with_accuracy()
clk: fixed-rate: Convert to clk_hw based APIs
clk: gpio: Use DT way of specifying parents
* clk-renesas:
clk: renesas: Prepare for split of R-Car H3 config symbol
dt-bindings: clock: renesas: cpg-mssr: Fix r8a774b1 typo
clk: renesas: r7s9210: Add SPIBSC clock
clk: renesas: rcar-gen3: Allow changing the RPC[D2] clocks
clk: renesas: Remove use of ARCH_R8A7796
clk: renesas: rcar-gen2: Change multipliers and dividers to u8
* clk-amlogic:
clk: clarify that clk_set_rate() does updates from top to bottom
clk: meson: meson8b: make the CCF use the glitch-free mali mux
clk: meson: pll: Fix by 0 division in __pll_params_to_rate()
clk: meson: g12a: fix missing uart2 in regmap table
clk: meson: meson8b: use of_clk_hw_register to register the clocks
clk: meson: meson8b: don't register the XTAL clock when provided via OF
clk: meson: meson8b: change references to the XTAL clock to use [fw_]name
clk: meson: meson8b: use clk_hw_set_parent in the CPU clock notifier
clk: meson: add a driver for the Meson8/8b/8m2 DDR clock controller
dt-bindings: clock: meson8b: add the clock inputs
dt-bindings: clock: add the Amlogic Meson8 DDR clock controller binding
* clk-allwinner:
clk: sunxi: a23/a33: Export the MIPI PLL
clk: sunxi: a31: Export the MIPI PLL
clk: sunxi-ng: a64: export CLK_CPUX clock for DVFS
clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock
clk: sunxi-ng: r40: Export MBUS clock
clk: sunxi: use of_device_get_match_data
Running `make dt_binging_check`, gives the error:
DTC Documentation/devicetree/bindings/clock/qcom,gcc.example.dt.yaml
Error: Documentation/devicetree/bindings/clock/qcom,gcc.example.dts:111.28-29 syntax error
FATAL ERROR: Unable to parse input tree
This is because the last example uses the macro RPM_SMD_XO_CLK_SRC which
is defined in qcom,rpmcc.h but the include of this header is missing.
Add the include to fix the error.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Link: https://lkml.kernel.org/r/20200122134639.11735-1-dafna.hirschfeld@collabora.com
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
We currently have a hidden dependency to the device tree node name for
the clkctrl clocks. Instead of using standard node name like "clock", we
must use "l4-per-clkctrl" type naming so the clock driver can find the
associated clock domain. Further, if "clk" is specified for a clock node
name, the driver sets TI_CLK_CLKCTRL_COMPAT flag that uses different
logic for the clock name based on the parent node name for the all the
clkctrl clocks for the SoC.
If the clock node naming dependency is not understood, the related
clockdomain is not found, or a wrong one can get used if a clock manager
has multiple clock domains.
As each clkctrl instance represents a single clock domain, let's allow
using domain specific compatible names to specify the clock domain.
This simplifies things and removes the hidden dependency to the node
name. And then later on, after the node names have been standardized,
we can drop the related code for parsing the node names.
Let's also update the binding to use standard "clock" node naming
instead of "clk" and add the missing description for reg.
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Most of the clock related dt-binding header files are located in
dt-bindings/clock folder. It would be good to keep all the similar
header files at a single location.
Suggested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
ARM: dts: Amlogic updates for v5.6
- add DDR clock controller
- GPU OPP updates
* tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson8b: use the actual frequency for the GPU's 364MHz OPP
ARM: dts: meson8: use the actual frequency for the GPU's 182.1MHz OPP
ARM: dts: meson8b: fix the clock controller compatible string
ARM: dts: meson8b: add the DDR clock controller
ARM: dts: meson8: add the DDR clock controller
ARM: dts: meson: provide the XTAL clock using a fixed-clock
dt-bindings: clock: meson8b: add the clock inputs
dt-bindings: clock: add the Amlogic Meson8 DDR clock controller binding
Link: https://lore.kernel.org/r/7hwo9udi7m.fsf@baylibre.com
Signed-off-by: Olof Johansson <olof@lixom.net>
This is our usual set of DT patches for the Allwinner SoCs.
It's fairly big this time, but the highlights are:
- Enable cpufreq and CPU thermal throttling on the A64
- CLK_CPUX macro usage removed (changed from first pull request)
- CSI0 support on the R40
- CSI1 support on the A10 and A20
- SPI support on the R40
- PMU support on the H3, H5, H6 and R40
- MIPI-DSI support on the A64
- PWM support on the H6
- Thermal sensor on the A64, A83t, H3, H5, H6 and R40
- More DT schemas fixes and conversions
- New boards: LibreComputer ALL-H5-CC H5, LibreComputer ALL-H3-IT H5,
Pine64 H64 Model B, Neutis N5H3
* tag 'sunxi-dt-for-5.6-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (52 commits)
arm64: dts: allwinner: a64: enable DVFS
arm64: dts: allwinner: a64: add dtsi with CPU operating points
arm64: dts: allwinner: a64: add cooling maps and thermal tripping points
arm64: dts: allwinner: a64: add CPU clock to CPU0-3 nodes
arm64: dts: allwinner: sun50i-a64: Use macros for newly exported clocks
ARM: dts: sunxi: Use macros for references to CCU clocks
arm64: dts: allwinner: h5: Add Libre Computer ALL-H5-CC H5 board
ARM: dts: sun8i: R40: Add SPI controllers nodes and pinmuxes
arm64: dts: allwinner: a64: pinebook: Fix lid wakeup
ARM: dts: sun8i: r40: Add device node for CSI0
ARM: dts: sun7i: Add CSI1 controller and pinmux options
ARM: dts: sun4i: Add CSI1 controller and pinmux options
ARM: dts: sunxi: Add missing LVDS resets and clocks
ARM: dts: sun8i: r40: Use tcon top clock index macros
ARM: dts: sun8i: R40: Add PMU node
ARM: dts: sun8i: R40: Upgrade GICC reg size to 8K
arm64: dts: allwinner: h6: Add thermal sensor and thermal zones
ARM: dts: sunxi: Add Libre Computer ALL-H3-IT H5 board
arm64: dts: allwinner: a64: Add MIPI DSI pipeline
arm64: dts: allwinner: a64: Add thermal sensors and thermal zones
...
Link: https://lore.kernel.org/r/20200113095555.GA29848@wens.csie.org
Signed-off-by: Olof Johansson <olof@lixom.net>
