The output of boardinfo command was extended to contain information
about XM. Indicates if is present and in case it is, tells which
localports are used for the connection. So parse this info and store it
in bus_info passed up to the driver.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to offload entries to XM, implement a set of low-level
functions to work with LPM trees in XM and also to pack and write
FIB entries into XM.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RXLTE enables XLT (eXtended Lookup Table) LPM lookups if a capable
XM is present on the system.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The XMDR allows direct access to the XM device via the switch.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Chan says:
====================
bnxt_en: Improve firmware flashing.
This patchset improves firmware flashing in 2 ways:
- If firmware returns NO_SPACE error during flashing, the driver will
create the UPDATE directory with more staging area and retry.
- Instead of allocating a big DMA buffer for the entire contents of
the firmware package size, fallback to a smaller buffer to DMA the
contents in multiple DMA operations.
====================
Link: https://lore.kernel.org/r/1607860306-17244-1-git-send-email-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current scheme allocates a DMA buffer as big as the requested
firmware package file and DMAs the contents to firmware in one
operation. The buffer size can be several hundred kilo bytes and
the driver may not be able to allocate the memory. This will cause
firmware upgrade to fail.
Improve the scheme by using smaller DMA blocks and calling firmware to
DMA each block in a batch mode. Older firmware can cause excessive
NVRAM erases if the block size is too small so we try to allocate a
256K buffer to begin with and size it down successively if we cannot
allocate the memory.
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In bnxt_flash_package_from_fw_obj(), if firmware returns the NO_SPACE
error, call __bnxt_flash_nvram() to create the UPDATE directory and
then loop back and retry one more time.
Since the first try may fail, we use the silent version to send the
firmware commands.
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On NICs with a smaller NVRAM, FW installation may fail after multiple
updates due to fragmentation. The driver can retry when FW returns
a special error code. To faciliate the retry, we restructure the
logic that performs the flashing in a loop. The actual retry logic
will be added in the next patch.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This function will be modified in the next patch to retry flashing
the firmware in a loop. To facilate that, we rearrange the code so
that the steps that only need to be done once before the loop will be
moved to the top of the function.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor bnxt_flash_nvram() into __bnxt_flash_nvram() that takes an
additional dir_item_len parameter. The new function will be used
in subsequent patches with the dir_item_len parameter set to create
the UPDATE directory during flashing.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since its creation Marvell NIC driver for Armada 375/7k8k and
CN913x SoC families mvpp2 has been lacking an entry in MAINTAINERS,
which sometimes lead to unhandled bugs that persisted
across several kernel releases.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201211165114.26290-1-mw@semihalf.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reproduces BUG_ON in skb_checksum_help():
tun creates (bogus) skb with huge partial-checksummed area and
small ip packet inside. Then ip_rcv trims the skb based on size
of internal ip packet, after that csum offset points beyond of
trimmed skb. Then checksum_tg() called via netfilter hook
triggers BUG_ON:
offset = skb_checksum_start_offset(skb);
BUG_ON(offset >= skb_headlen(skb));
To work around the problem this patch forces pskb_trim_rcsum_slow()
to return -EINVAL in described scenario. It allows its callers to
drop such kind of packets.
Link: https://syzkaller.appspot.com/bug?id=b419a5ca95062664fe1a60b764621eb4526e2cd0
Reported-by: syzbot+7010af67ced6105e5ab6@syzkaller.appspotmail.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/1b2494af-2c56-8ee2-7bc0-923fcad1cdf8@virtuozzo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub pointed out that the IP_ECN_set* helpers basically open-code
csum16_add(), so let's switch them over to using the helper instead.
v2:
- Use __be16 for check_add stack variable in IP_ECN_set_ce() (kbot)
v3:
- Turns out we need __force casts to do arithmetic on __be16 types
Reported-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Jonathan Morton <chromatix99@gmail.com>
Tested-by: Pete Heist <pete@heistp.net>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20201211142638.154780-1-toke@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I got a warining report:
br_sysfs_addbr: can't create group bridge4/bridge
------------[ cut here ]------------
sysfs group 'bridge' not found for kobject 'bridge4'
WARNING: CPU: 2 PID: 9004 at fs/sysfs/group.c:279 sysfs_remove_group fs/sysfs/group.c:279 [inline]
WARNING: CPU: 2 PID: 9004 at fs/sysfs/group.c:279 sysfs_remove_group+0x153/0x1b0 fs/sysfs/group.c:270
Modules linked in: iptable_nat
...
Call Trace:
br_dev_delete+0x112/0x190 net/bridge/br_if.c:384
br_dev_newlink net/bridge/br_netlink.c:1381 [inline]
br_dev_newlink+0xdb/0x100 net/bridge/br_netlink.c:1362
__rtnl_newlink+0xe11/0x13f0 net/core/rtnetlink.c:3441
rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3500
rtnetlink_rcv_msg+0x385/0x980 net/core/rtnetlink.c:5562
netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2494
netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1330
netlink_sendmsg+0x793/0xc80 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg+0x139/0x170 net/socket.c:671
____sys_sendmsg+0x658/0x7d0 net/socket.c:2353
___sys_sendmsg+0xf8/0x170 net/socket.c:2407
__sys_sendmsg+0xd3/0x190 net/socket.c:2440
do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
In br_device_event(), if the bridge sysfs fails to be added,
br_device_event() should return error. This can prevent warining
when removing bridge sysfs that do not exist.
Fixes: bb900b27a2 ("bridge: allow creating bridge devices with netlink")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Tested-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20201211122921.40386-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead doing the check for allocation in each loop, move it outside
the while loop and do it every NAPI loop.
This change boosts the xdpsock rxdrop scenario with 15% more
packets-per-second.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/r/20201211085410.59350-1-bjorn.topel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
George Cherian says:
====================
Add devlink and devlink health reporters to octeontx2
Add basic devlink and devlink health reporters.
Devlink health reporters are added for NPA block.
Address Jakub's comment to add devlink support for error reporting.
https://www.spinics.net/lists/netdev/msg670712.html
For now, I have dropped the NIX block health reporters.
This series attempts to add health reporters only for the NPA block.
As per Jakub's suggestion separate reporters per event is used and also
got rid of the counters.
====================
Link: https://lore.kernel.org/r/20201211062526.2302643-1-george.cherian@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add Documentation for devlink health reporters for NPA block.
Signed-off-by: George Cherian <george.cherian@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add devlink support to AF driver. Basic devlink support is added.
Currently info_get is the only supported devlink ops.
devlink ouptput looks like this
# devlink dev
pci/0002:01:00.0
# devlink dev info
pci/0002:01:00.0:
driver octeontx2-af
#
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: George Cherian <george.cherian@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cleanup function in this script that tries to delete hv-1 / hv-2
vm-1 / vm-2 netns will generate some uncessary error messages:
Cannot remove namespace file "/run/netns/hv-2": No such file or directory
Cannot remove namespace file "/run/netns/vm-1": No such file or directory
Cannot remove namespace file "/run/netns/vm-2": No such file or directory
Redirect it to /dev/null like other commands in the cleanup function
to reduce confusion.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Link: https://lore.kernel.org/r/20201211042420.16411-1-po-hsu.lin@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For each TCP zero window probe, the icsk_backoff is increased by one and
its max value is tcp_retries2. If tcp_retries2 is greater than 63, the
probe0 timeout shift may exceed its max bits. On x86_64/ARMv8/MIPS, the
shift count would be masked to range 0 to 63. And on ARMv7 the result is
zero. If the shift count is masked, only several probes will be sent
with timeout shorter than TCP_RTO_MAX. But if the timeout is zero, it
needs tcp_retries2 times probes to end this false timeout. Besides,
bitwise shift greater than or equal to the width is an undefined
behavior.
This patch adds a limit to the backoff. The max value of max_when is
TCP_RTO_MAX and the min value of timeout base is TCP_RTO_MIN. The limit
is the backoff from TCP_RTO_MIN to TCP_RTO_MAX.
Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Link: https://lore.kernel.org/r/20201208091910.37618-1-cambda@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mat Martineau says:
====================
mptcp: Another set of miscellaneous MPTCP fixes
This is another collection of MPTCP fixes and enhancements that we have
tested in the MPTCP tree:
Patch 1 cleans up cgroup attachment for in-kernel subflow sockets.
Patches 2 and 3 make sure that deletion of advertised addresses by an
MPTCP path manager when flushing all addresses behaves similarly to the
remove-single-address operation, and adds related tests.
Patches 4 and 8 do some minor cleanup.
Patches 5-7 add MPTCP_FASTCLOSE functionality. Note that patch 6 adds MPTCP
option parsing to tcp_reset().
Patch 9 optimizes skb size for outgoing MPTCP packets.
====================
Link: https://lore.kernel.org/r/20201210222506.222251-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the xmit path of the MPTCP protocol creates smaller-
than-max-size skbs, which is suboptimal for the performances.
There are a few things to improve:
- when coalescing to an existing skb, must clear the PUSH flag
- tcp_build_frag() expect the available space as an argument.
When coalescing is enable MPTCP already subtracted the
to-be-coalesced skb len. We must increment said argument
accordingly.
Before:
./use_mptcp.sh netperf -H 127.0.0.1 -t TCP_STREAM
[...]
131072 16384 16384 30.00 24414.86
After:
./use_mptcp.sh netperf -H 127.0.0.1 -t TCP_STREAM
[...]
131072 16384 16384 30.05 28357.69
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is no need to unconditionally acquire the join list
lock, we can simply splice the join list into the subflow
list and traverse only the latter.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
parse the MPTCP FASTCLOSE subtype.
If provided key matches the local one, schedule the work queue to close
(with tcp reset) all subflows.
The MPTCP socket moves to closed state immediately.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Because TCP-level resets only affect the subflow, there is a MPTCP
option to indicate that the MPTCP-level connection should be closed
immediately without a mptcp-level fin exchange.
This is the 'MPTCP fast close option'. It can be carried on ack
segments or TCP resets. In the latter case, its needed to parse mptcp
options also for reset packets so that MPTCP can act accordingly.
Next patch will add receive side fastclose support in MPTCP.
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When processing options from tcp reset path its possible that
tcp_done(ssk) drops the last reference on the mptcp socket which
results in use-after-free.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the macro MPTCPOPT_HMAC_LEN instead of a constant in struct
mptcp_options_received.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added the flush addrs testcase. In do_transfer, if the number
of removing addresses is less than 8, use the del addr command to remove
the addresses one by one. If the number is more than 8, use the flush addrs
command to remove the addresses.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the PM netlink flushes the addresses, invoke the remove address
function mptcp_nl_remove_subflow_and_signal_addr to remove the addresses
and the subflows. Since this function should not be invoked under lock,
move __flush_addrs out of the pernet->lock.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It has been observed that the kernel sockets created for the subflows
(except the first one) are not in the same cgroup as their parents.
That's because the additional subflows are created by kernel workers.
This is a problem with eBPF programs attached to the parent's
cgroup won't be executed for the children. But also with any other features
of CGroup linked to a sk.
This patch fixes this behaviour.
As the subflow sockets are created by the kernel, we can't use
'mem_cgroup_sk_alloc' because of the current context being the one of the
kworker. This is why we have to do low level memcg manipulation, if
required.
Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Nicolas Rybowski <nicolas.rybowski@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch checks that MHI queue is not full before waking up the net
queue. This fix sporadic MHI queueing issues in xmit. Indeed xmit and
its symmetric complete callback (ul_callback) can run concurently, it
is then not safe to unconditionnaly waking the queue in the callback
without checking queue fullness.
Fixes: 3ffec6a14f ("net: Add mhi-net driver")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1607599507-5879-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 6220 and 6250 switches do not have a learn2all bit in global1, ATU
control register; bit 3 is reserverd.
On the switches that do have that bit, it is used to control whether
learning frames are sent out the ports that have the message_port bit
set. So rather than adding yet another chip method, use the existence
of the ->port_setup_message_port method as a proxy for determining
whether the learn2all bit exists (and should be set).
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Link: https://lore.kernel.org/r/20201210110645.27765-1-rasmus.villemoes@prevas.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the exception actions are not processed correctly as the wrong
dataset is passed. This change fixes this, including the misleading
comment.
In addition, a check was added to make sure we work on an IPv4 packet,
and not just assume if it's not IPv6 it's IPv4.
This was all tested using OVS with patch,
https://patchwork.ozlabs.org/project/openvswitch/list/?series=21639,
applied and sending packets with a TTL of 1 (and 0), both with IPv4
and IPv6.
Fixes: 69929d4c49 ("net: openvswitch: fix TTL decrement action netlink message format")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/160733569860.3007.12938188180387116741.stgit@wsfd-netdev64.ntdv.lab.eng.bos.redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
1) Missing dependencies in NFT_BRIDGE_REJECT, from Randy Dunlap.
2) Use atomic_inc_return() instead of atomic_add_return() in IPVS,
from Yejune Deng.
3) Simplify check for overquota in xt_nfacct, from Kaixu Xia.
4) Move nfnl_acct_list away from struct net, from Miao Wang.
5) Pass actual sk in reject actions, from Jan Engelhardt.
6) Add timeout and protoinfo to ctnetlink destroy events,
from Florian Westphal.
7) Four patches to generalize set infrastructure to support
for multiple expressions per set element.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next:
netfilter: nftables: netlink support for several set element expressions
netfilter: nftables: generalize set extension to support for several expressions
netfilter: nftables: move nft_expr before nft_set
netfilter: nftables: generalize set expressions support
netfilter: ctnetlink: add timeout and protoinfo to destroy events
netfilter: use actual socket sk for REJECT action
netfilter: nfnl_acct: remove data from struct net
netfilter: Remove unnecessary conversion to bool
ipvs: replace atomic_add_return()
netfilter: nft_reject_bridge: fix build errors due to code movement
====================
Link: https://lore.kernel.org/r/20201212230513.3465-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-12-14
1) Expose bpf_sk_storage_*() helpers to iterator programs, from Florent Revest.
2) Add AF_XDP selftests based on veth devs to BPF selftests, from Weqaar Janjua.
3) Support for finding BTF based kernel attach targets through libbpf's
bpf_program__set_attach_target() API, from Andrii Nakryiko.
4) Permit pointers on stack for helper calls in the verifier, from Yonghong Song.
5) Fix overflows in hash map elem size after rlimit removal, from Eric Dumazet.
6) Get rid of direct invocation of llc in BPF selftests, from Andrew Delgadillo.
7) Fix xsk_recvmsg() to reorder socket state check before access, from Björn Töpel.
8) Add new libbpf API helper to retrieve ring buffer epoll fd, from Brendan Jackman.
9) Batch of minor BPF selftest improvements all over the place, from Florian Lehner,
KP Singh, Jiri Olsa and various others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (31 commits)
selftests/bpf: Add a test for ptr_to_map_value on stack for helper access
bpf: Permits pointers on stack for helper calls
libbpf: Expose libbpf ring_buffer epoll_fd
selftests/bpf: Add set_attach_target() API selftest for module target
libbpf: Support modules in bpf_program__set_attach_target() API
selftests/bpf: Silence ima_setup.sh when not running in verbose mode.
selftests/bpf: Drop the need for LLVM's llc
selftests/bpf: fix bpf_testmod.ko recompilation logic
samples/bpf: Fix possible hang in xdpsock with multiple threads
selftests/bpf: Make selftest compilation work on clang 11
selftests/bpf: Xsk selftests - adding xdpxceiver to .gitignore
selftests/bpf: Drop tcp-{client,server}.py from Makefile
selftests/bpf: Xsk selftests - Bi-directional Sockets - SKB, DRV
selftests/bpf: Xsk selftests - Socket Teardown - SKB, DRV
selftests/bpf: Xsk selftests - DRV POLL, NOPOLL
selftests/bpf: Xsk selftests - SKB POLL, NOPOLL
selftests/bpf: Xsk selftests framework
bpf: Only provide bpf_sock_from_file with CONFIG_NET
bpf: Return -ENOTSUPP when attaching to non-kernel BTF
xsk: Validate socket state in xsk_recvmsg, prior touching socket members
...
====================
Link: https://lore.kernel.org/r/20201214214316.20642-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change bpf_iter_task.c such that pointer to map_value may appear
on the stack for bpf_seq_printf() to access. Without previous
verifier patch, the bpf_iter test will fail.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201210013350.943985-1-yhs@fb.com
Currently, when checking stack memory accessed by helper calls,
for spills, only PTR_TO_BTF_ID and SCALAR_VALUE are
allowed.
Song discovered an issue where the below bpf program
int dump_task(struct bpf_iter__task *ctx)
{
struct seq_file *seq = ctx->meta->seq;
static char[] info = "abc";
BPF_SEQ_PRINTF(seq, "%s\n", info);
return 0;
}
may cause a verifier failure.
The verifier output looks like:
; struct seq_file *seq = ctx->meta->seq;
1: (79) r1 = *(u64 *)(r1 +0)
; BPF_SEQ_PRINTF(seq, "%s\n", info);
2: (18) r2 = 0xffff9054400f6000
4: (7b) *(u64 *)(r10 -8) = r2
5: (bf) r4 = r10
;
6: (07) r4 += -8
; BPF_SEQ_PRINTF(seq, "%s\n", info);
7: (18) r2 = 0xffff9054400fe000
9: (b4) w3 = 4
10: (b4) w5 = 8
11: (85) call bpf_seq_printf#126
R1_w=ptr_seq_file(id=0,off=0,imm=0) R2_w=map_value(id=0,off=0,ks=4,vs=4,imm=0)
R3_w=inv4 R4_w=fp-8 R5_w=inv8 R10=fp0 fp-8_w=map_value
last_idx 11 first_idx 0
regs=8 stack=0 before 10: (b4) w5 = 8
regs=8 stack=0 before 9: (b4) w3 = 4
invalid indirect read from stack off -8+0 size 8
Basically, the verifier complains the map_value pointer at "fp-8" location.
To fix the issue, if env->allow_ptr_leaks is true, let us also permit
pointers on the stack to be accessible by the helper.
Reported-by: Song Liu <songliubraving@fb.com>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201210013349.943719-1-yhs@fb.com
This provides a convenient perf ringbuf -> libbpf ringbuf migration
path for users of external polling systems. It is analogous to
perf_buffer__epoll_fd.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201214113812.305274-1-jackmanb@google.com
Add test for bpf_program__set_attach_target() API, validating it can find
kernel module fentry target.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201211215825.3646154-3-andrii@kernel.org
Support finding kernel targets in kernel modules when using
bpf_program__set_attach_target() API. This brings it up to par with what
libbpf supports when doing declarative SEC()-based target determination.
Some minor internal refactoring was needed to make sure vmlinux BTF can be
loaded before bpf_object's load phase.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201211215825.3646154-2-andrii@kernel.org
According to the X.25 documentation, there was a plan to implement
X.25-over-802.2-LLC. It never finished but left various code stubs in the
X.25 code. At this time it is unlikely that it would ever finish so it
may be better to remove those code stubs.
Also change the documentation to make it clear that this is not a ongoing
plan anymore. Change words like "will" to "could", "would", etc.
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20201209033346.83742-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On a few of our systems, I found frequent 'unshare(CLONE_NEWNET)' calls
make the number of active slab objects including 'sock_inode_cache' type
rapidly and continuously increase. As a result, memory pressure occurs.
In more detail, I made an artificial reproducer that resembles the
workload that we found the problem and reproduce the problem faster. It
merely repeats 'unshare(CLONE_NEWNET)' 50,000 times in a loop. It takes
about 2 minutes. On 40 CPU cores / 70GB DRAM machine, the available
memory continuously reduced in a fast speed (about 120MB per second,
15GB in total within the 2 minutes). Note that the issue don't
reproduce on every machine. On my 6 CPU cores machine, the problem
didn't reproduce.
'cleanup_net()' and 'fqdir_work_fn()' are functions that deallocate the
relevant memory objects. They are asynchronously invoked by the work
queues and internally use 'rcu_barrier()' to ensure safe destructions.
'cleanup_net()' works in a batched maneer in a single thread worker,
while 'fqdir_work_fn()' works for each 'fqdir_exit()' call in the
'system_wq'. Therefore, 'fqdir_work_fn()' called frequently under the
workload and made the contention for 'rcu_barrier()' high. In more
detail, the global mutex, 'rcu_state.barrier_mutex' became the
bottleneck.
This commit avoids such contention by doing the 'rcu_barrier()' and
subsequent lightweight works in a batched manner, as similar to that of
'cleanup_net()'. The fqdir hashtable destruction, which is done before
the 'rcu_barrier()', is still allowed to run in parallel for fast
processing, but this commit makes it to use a dedicated work queue
instead of the 'system_wq', to make sure that the number of threads is
bounded.
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201211112405.31158-1-sjpark@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If interrupt trigger is not set when requesting the interrupt, the core
will take care of reading trigger type from Devicetree. There is no
point to do it in the driver.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210211824.214949-1-krzk@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MT7530 has a global RX length register, so we are actually changing its
MRU.
Enable MTU normalization for this reason.
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Acked-by: Landen Chao <landen.chao@mediatek.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20201210170322.3433-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2020-12-12
Just one patch this time:
1) Redact the SA keys with kernel lockdown confidentiality.
If enabled, no secret keys are sent to uuserspace.
From Antony Antony.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: redact SA secret with lockdown confidentiality
====================
Link: https://lore.kernel.org/r/20201212085737.2101294-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Second set of patches for v5.11. iwlwifi gaining support for the new 6
GHz band and rtw88 got a new channel. Lots of new features for mt76
and ath11k now has working suspend for PCI devices. And as always,
smaller fixes and cleanups all over.
Major changes:
rtw88
* add support for channel 144
mt76
* support for more sta interfaces on mt7615/mt7915
* mt7915 encapsulation offload
* performance improvements
* channel noise report on mt7915
* mt7915 testmode support
* mt7915 DBDC support
iwlwifi
* support 6 GHz band
ath11k
* suspend support for QCA6390 PCI devices
* support TXOP duration based RTS threshold
* mesh: add support for 256 bitmap in blockack frames in 11ax
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJf1E9MAAoJEG4XJFUm622bRoQIAIlN+blrTjjd56s+HTCfaHS5
OGQ4y0/EJ8C0cq4EIc1ijf6w6edzbKHJrDbSSgtIuM4pB4QisQRzLPiUvehmdg4f
Hwn9YJXUDinDa9pxa1Kz1ht+Q4xoqU43Ofw+bIFhNLo9GGB3llvztFfTCOs97PLj
qazB281YZakb1M7q/QQIu66ND0uorSF8mtJHgE4PYPYpSp5zbv6Ep3/ttn2CUnX+
XyaDEijERvtLKrm9k0+/mBXQa6vSiS4u/TlxB6zKQ+nFunBj0FhPLuhC37nnIQTl
8DJSc3pdR78C5pV+DhoBrla7vrXAaGjxRIW/Qv0M16yShVJRIr380WPQmXXZ6co=
=DZt8
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-2020-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.11
Second set of patches for v5.11. iwlwifi gaining support for the new
6 GHz band and rtw88 got a new channel. Lots of new features for mt76
and ath11k now has working suspend for PCI devices. And as always,
smaller fixes and cleanups all over.
Major changes:
rtw88
* add support for channel 144
mt76
* support for more sta interfaces on mt7615/mt7915
* mt7915 encapsulation offload
* performance improvements
* channel noise report on mt7915
* mt7915 testmode support
* mt7915 DBDC support
iwlwifi
* support 6 GHz band
ath11k
* suspend support for QCA6390 PCI devices
* support TXOP duration based RTS threshold
* mesh: add support for 256 bitmap in blockack frames in 11ax
* tag 'wireless-drivers-next-2020-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (197 commits)
ath11k: implement suspend for QCA6390 PCI devices
ath11k: hif: add ce irq enable and disable functions
ath11k: implement WoW enable and wakeup commands
ath11k: set credit_update flag for flow controlled ep only
ath11k: dp: stop rx pktlog before suspend
ath11k: htc: implement suspend handling
ath11k: htc: remove unused struct ath11k_htc_ops
ath11k: pci: read select_window register to ensure write is finished
ath11k: hif: implement suspend and resume functions
ath11k: mhi: hook suspend and resume
ath11k: Fix incorrect tlvs in scan start command
ath11k: pci: disable VDD4BLOW
ath11k: pci: fix L1ss clock unstable problem
ath11k: pci: fix hot reset stability issues
ath11k: put hw to DBS using WMI_PDEV_SET_HW_MODE_CMDID
ath11k: mhi: print a warning if firmware crashed
ath11k: use MHI provided APIs to allocate and free MHI controller
ath10k: add atomic protection for device recovery
ath10k: add option for chip-id based BDF selection
mt76: remove unused variable q
...
====================
Link: https://lore.kernel.org/r/20201212050839.EF50EC433C6@smtp.codeaurora.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds three new netlink attributes to encapsulate a list of
expressions per set elements:
- NFTA_SET_EXPRESSIONS: this attribute provides the set definition in
terms of expressions. New set elements get attached the list of
expressions that is specified by this new netlink attribute.
- NFTA_SET_ELEM_EXPRESSIONS: this attribute allows users to restore (or
initialize) the stateful information of set elements when adding an
element to the set.
- NFTA_DYNSET_EXPRESSIONS: this attribute specifies the list of
expressions that the set element gets when it is inserted from the
packet path.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch replaces NFT_SET_EXPR by NFT_SET_EXT_EXPRESSIONS. This new
extension allows to attach several expressions to one set element (not
only one single expression as NFT_SET_EXPR provides). This patch
prepares for support for several expressions per set element in the
netlink userspace API.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
