The 4.15 vmwgfx driver shows a warning during boot.
It is caused by a mismatch between the result of vmw_enable_vblank()
and what the drm_atomic_helper expects.
Signed-off by: Woody Suwalski <terraluna977@gmail.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
The vmw_view_cmd_to_type() function returns vmw_view_max (3) on error.
It's one element beyond the end of the vmw_view_cotables[] table.
My read on this is that it's possible to hit this failure. header->id
comes from vmw_cmd_check() and it's a user controlled number between
1040 and 1225 so we can hit that error. But I don't have the hardware
to test this code.
Fixes: d80efd5cb3 ("drm/vmwgfx: Initial DX support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: <stable@vger.kernel.org>
Buffer objects need to be either pinned or reserved while a map is active,
that's not the case here, so avoid caching the framebuffer map.
This will cause increasing mapping activity mainly when we don't do
page flipping.
This fixes occasional garbage filled screens when the framebuffer has been
evicted after the map.
Since in-kernel mapping of whole buffer objects is error-prone on 32-bit
architectures and also quite inefficient, we will revisit this later.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Cc: <stable@vger.kernel.org>
- couple of documentation build fixes
- serialize non-blocking modesets
- prevent DMC from messing up GMBUS transfers
- PSR regression fix
-----BEGIN PGP SIGNATURE-----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=ZIko
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-fixes-2018-01-04' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v4.15-rc7
- couple of documentation build fixes
- serialize non-blocking modesets
- prevent DMC from messing up GMBUS transfers
- PSR regression fix
* tag 'drm-intel-fixes-2018-01-04' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Apply Display WA #1183 on skl, kbl, and cfl
docs: fix, intel_guc_loader.c has been moved to intel_guc_fw.c
documentation/gpu/i915: fix docs build error after file rename
drm/i915: Put all non-blocking modesets onto an ordered wq
drm/i915: Disable DC states around GMBUS on GLK
drm/i915/psr: Fix register name mess up.
- backport of a DC change which fixes a greenish tint on some RV hw
- properly handle kzalloc fail in ttm
* 'drm-fixes-4.15' of git://people.freedesktop.org/~agd5f/linux:
drm/ttm: check the return value of kzalloc
drm/amd/display: call set csc_default if enable adjustment is false
Display WA #1183 was recently added to workaround
"Failures when enabling DPLL0 with eDP link rate 2.16
or 4.32 GHz and CD clock frequency 308.57 or 617.14 MHz
(CDCLK_CTL CD Frequency Select 10b or 11b) used in this
enabling or in previous enabling."
This workaround was designed to minimize the impact only
to save the bad case with that link rates. But HW engineers
indicated that it should be safe to apply broadly, although
they were expecting the DPLL0 link rate to be unchanged on
runtime.
We need to cover 2 cases: when we are in fact enabling DPLL0
and when we are just changing the frequency with small
differences.
This is based on previous patch by Rodrigo Vivi with suggestions
from Ville Syrjälä.
Cc: Arthur J Runyan <arthur.j.runyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171204232210.4958-1-lucas.demarchi@intel.com
(cherry picked from commit 53421c2fe9)
[ Lucas: Backport to 4.15 adding back variable that has been removed on
commits not meant to be backported ]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180102201837.6812-1-lucas.demarchi@intel.com
We were calling enable_irq on bind, where it was already enabled previously
by the IRQ helper. Additionally, dev->irq is not set correctly until after
postinstall and so was always zero here, triggering a warning in 4.15.
Fix both by moving the enable to the power management resume path, where we
know there was a previous disable invocation during suspend.
Fixes: 253696ccd6 ("drm/vc4: Account for interrupts in flight")
Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1514563543-32511-1-git-send-email-stschake@gmail.com
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
In the function ttm_page_alloc_init, kzalloc call is made for variable
_manager, we need to check its return value, it may return NULL.
Signed-off-by: Xiongwei Song <sxwjean@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes a greenish tint on RV displays.
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[drake@endlessm.com: backport to 4.15]
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The omap4 CEC hardware cannot tell a Nack from a Low Drive from an
Arbitration Lost error, so just report a Nack, which is almost
certainly the reason for the error anyway.
This also simplifies the implementation. The only three interrupts
that need to be enabled are:
Transmit Buffer Full/Empty Change event: triggered when the
transmit finished successfully and cleared the buffer.
Receiver FIFO Not Empty event: triggered when a message was received.
Frame Retransmit Count Exceeded event: triggered when a transmit
failed repeatedly, usually due to the message being Nacked. Other
reasons are possible (Low Drive, Arbitration Lost) but there is no
way to know. If this happens the TX buffer needs to be cleared
manually.
While testing various error conditions I noticed that the hardware
can receive messages up to 18 bytes in total, which exceeds the legal
maximum of 16. This could cause a buffer overflow, so we check for
this and constrain the size to 16 bytes.
The old incorrect interrupt handler could cause the CEC framework to
enter into a bad state because it mis-detected the "Start Bit Irregularity
event" as an ARB_LOST transmit error when it actually is a receive error
which should be ignored.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Henrik Austad <haustad@cisco.com>
Tested-by: Henrik Austad <haustad@cisco.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We have plenty of global registers and whatnot programmed without
any further locking by the modeset code. Currently non-bocking
modesets are allowed to execute in parallel which could corrupt
said registers.
To avoid the problem let's run all non-blocking modesets on an
ordered workqueue. We still put page flips etc. to system_unbound_wq
allowing page flips on one pipe to execute in parallel with page flips
or a modeset on a another pipe (assuming no known state is shared
between them, at which point they would have been added to the same
atomic commit and serialized that way).
Blocking modesets are already serialized with each other by
connection_mutex, and thus are safe. To serialize them with
non-blocking modesets we just flush the workqueue before executing
blocking modesets.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 94f050246b ("drm/i915: nonblocking commit")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113133622.8593-1-ville.syrjala@linux.intel.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit 757fffcfdf)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Commit 77affa3172 ("drm/i915/psr: Fix compiler warnings for
hsw_psr_disable()") swapped status and control registers while fixing
indentation. The _ctl at the end of the status register name must have to
led to this.
Fixes: 77affa3172 ("drm/i915/psr: Fix compiler warnings for hsw_psr_disable()")
References: https://www.mrc-cbu.cam.ac.uk/people/matt.davis/cmabridge/
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171220043520.2599-1-dhinakaran.pandiyan@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 14c6547d6d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
GLK pipe C related fix, and a gvt fix.
* tag 'drm-intel-fixes-2017-12-22-1' of git://anongit.freedesktop.org/drm/drm-intel:
i915: Reject CCS modifiers for pipe C on Geminilake
drm/i915/gvt: Fix pipe A enable as default for vgpu
The vk cts test:
dEQP-VK.api.external.semaphore.opaque_fd.export_multiple_times_temporary
triggers a lot of
VFS: Close: file count is 0
Dave pointed out that clearing the syncobj->file from
drm_syncobj_file_release() was sufficient to silence the test, but that
opens a can of worm since we assumed that the syncobj->file was never
unset. Stop trying to reuse the same struct file for every fd pointing
to the drm_syncobj, and allocate one file for each fd instead.
v2: Fixup return handling of drm_syncobj_fd_to_handle
v2.1: [airlied: fix possible syncobj ref race]
Reported-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
drm-misc-fixes before holidays:
- fixup for the lease fixup (Keith)
- fb leak in the ww mutex fallback code (Maarten)
- sun4i fixes (Maxime, Hans)
* tag 'drm-misc-fixes-2017-12-21' of git://anongit.freedesktop.org/drm/drm-misc:
drm: move lease init after validation in drm_lease_create
drm/plane: Make framebuffer refcounting the responsibility of setplane_internal callers
drm/sun4i: hdmi: Move the mode_valid callback to the encoder
drm/sun4i: Fix error path handling
drm/sun4i: validate modes for HDMI
Patch bd36d3bab2 fixed a deadlock in the
failure path of drm_lease_create. This made the partially initialized
lease object visible for a short window of time.
To avoid having the lessee state appear transiently, I've rearranged
the code so that the lessor fields are not filled in until the
parameters are all validated and the function will succeed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171221065424.1304-1-keithp@keithp.com
drm/i915 fixes for v4.15-rc5
* tag 'drm-intel-fixes-2017-12-20' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Protect DDI port to DPLL map from theoretical race.
drm/i915/lpe: Remove double-encapsulation of info string
lock_all_ctx in setplane_internal may return -EINTR, and
__setplane_internal could return -EDEADLK. Making more
special cases for fb would make the code even harder to
read, so the easiest solution is not taking over the fb
refcount, and making callers responsible for dropping
the ref.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102707
Fixes: 13736ba3b3 ("drm/legacy: Convert setplane ioctl locking to interruptible.")
Testcase: kms_atomic_interruptible
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171220093545.613-2-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When attached to the connector, the mode_valid callback will only filter
the modes provided by the connector itself as part of its probe.
However, it will not be doing it when the mode is provided by the
userspace, which still might result in a broken configuration.
In order to enforce these constraints, move our mode_valid callback to the
encoder which doesn't have this behaviour.
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
[maxime: Wrote the commit log in order to update the patch from the merged
v3 to the v4 that was correct.]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0fa230a8-d01d-561a-f74f-6b4fd421255b@xs4all.nl
In case we have multiple modesets for different connectors
happening in parallel we could have a race on the RMW on these
shared registers.
This possibility was initially raised by Paulo when reviewing
commit '555e38d27317 ("drm/i915/cnl: DDI - PLL mapping")'
but the original possibility comes from commit '5416d871136d
("drm/i915/skl: Set the eDP link rate on DPLL0")'. Or maybe
later when atomic commits entered into picture.
Apparently the discussion around this topic showed that the
right solution would be on serializing the atomic commits in
a way that we don't have the possibility of races here since
if that parallel modeset happenings apparently many other
things will be on fire.
Code is there since SKL and there was no report of issue,
but since we never looked back to that serialization possibility,
and also we don't have an igt case for that it is better to at
least protect this corner.
Suggested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Fixes: 555e38d273 ("drm/i915/cnl: DDI - PLL mapping")
Fixes: 5416d87113 ("drm/i915/skl: Set the eDP link rate on DPLL0")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst maarten.lankhorst@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Maarten Lankhorst maarten.lankhorst@linux.intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20171215224310.19103-1-rodrigo.vivi@intel.com
(cherry picked from commit 8edcda1266)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Just printk the string, or at least do not double up on the newlines!
Fixes: eef57324d9 ("drm/i915: setup bridge for HDMI LPE audio driver")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Jerome Anand <jerome.anand@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213182858.2159-1-chris@chris-wilson.co.uk
(cherry picked from commit 99cd05c43b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The commit 4c7f16d14a ("drm/sun4i: Fix TCON clock and regmap
initialization sequence") moved a bunch of logic around, but forgot to
update the gotos after the introduction of the err_free_dotclock label.
It means that if we fail later that the one introduced in that commit,
we'll just to the old label which isn't free the clock we created. This
will result in a breakage as soon as someone tries to do something with
that clock, since its resources will have been long reclaimed.
Cc: <stable@vger.kernel.org>
Fixes: 4c7f16d14a ("drm/sun4i: Fix TCON clock and regmap initialization sequence")
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f83c1cebc731f0b4251f5ddd7b38c718cd79bb0b.1512662253.git-series.maxime.ripard@free-electrons.com
nouveau regression fixes, and some minor fixes.
* 'linux-4.15' of git://github.com/skeggsb/linux:
drm/nouveau: use alternate memory type for system-memory buffers with kind != 0
drm/nouveau: avoid GPU page sizes > PAGE_SIZE for buffer objects in host memory
drm/nouveau/mmu/gp10b: use correct implementation
drm/nouveau/pci: do a msi rearm on init
drm/nouveau/imem/nv50: fix refcount_t warning
drm/nouveau/bios/dp: support DP Info Table 2.0
drm/nouveau/fbcon: fix NULL pointer access in nouveau_fbcon_destroy
Fixes bug on Tegra where we'd strip kind information from system memory
(ie. all) buffers, resulting in misrendering.
Behaviour on dGPU should be unchanged.
Reported-by: Thierry Reding <treding@nvidia.com>
Fixes: d7722134b8 ("drm/nouveau: switch over to new memory and vmm interfaces")
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Thierry Reding <treding@nvidia.com>
While the Tegra (GK20A, GM20B, GP10B) MMUs support large pages in host
memory, we're currently lacking IOMMU support for merging system pages
into large enough chunks to be mapped as such by the GPU.
The core VMM code actually supports automatically determining the best
page size to map with, which is intended for these situations, but for
various complicated reasons the DRM is currently forcing the page size
selection on a per-BO basis.
This should fix breakage reported on Tegra GPUs in the meantime, until
one or both of the above issues are resolved properly.
Reported-by: Mikko Perttunen <cyndis@kapsi.fi>
Fixes: 7dc6a446da ("drm/nouveau: improve selection of GPU page size")
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Thierry Reding <treding@nvidia.com>
On my GP107 when I load nouveau after unloading it, for some reason the
GPU stopped sending or the CPU stopped receiving interrupts if MSI was
enabled.
Doing a rearm once before getting any interrupts fixes this.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
When the fbcon object is initialized, but nouveau_fbcon_create is not
called, we run into a NULL pointer access within nouveau_fbcon_create when
unloading nouveau.
The call to drm_fb_helper_funcs.fb_probe is deferred until there is a
display for real since 4.14, that's why fbcon->helper.fb is still not set.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
drm/i915 fixes for v4.15-rc4
* tag 'drm-intel-fixes-2017-12-14' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915/fence: Use rcu to defer freeing of irq_work
drm/i915: Stop listening to request resubmission from the signaler kthread
drm/i915: Drop fb reference on load_detect_pipe failure path
drm/i915: Flush pending GTT writes before unbinding
Nothing too major here. A couple more ttm fixes for huge page and a kiq
fix for amdgpu, along with some DC fixes.
* 'drm-fixes-4.15' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/display: Fix rehook MST display not light back on
drm/amd/display: fix missing pixel clock adjustment for dongle
drm/amd/display: set chroma taps to 1 when not scaling
drm/amd/display: add pipe locking before front end programing
drm/amdgpu: fix MAP_QUEUES paramter
drm/ttm: max_cpages is in unit of native page
drm/ttm: fix incorrect calculate on shrink_pages
Original applied dm_restore_drm_connector_state() has got removed.
Set link status to BAD before hotplug() event could trigger
another modeset from userspace.
The fix "Fix MST daisy chain SST not light up" commit makes so it is trying
to create a stream prior to dc_sink. That makes dc_sink is not present in
create_stream_for_sink().
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Andrew Jiang <Andrew.Jiang@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add pipe locking/unlocking before we program the front end
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When I connected my cubieboard running 4.15-rc1 to my 4k display I got no
picture. Some digging found that there is no check against the upper
pixelclock limit of the HDMI output, so X selects a 4kp60 format at 594
MHz, which obviously won't work.
The patch below adds a check for the upper bound of what this hardware can
do, and it checks if the requested tmds clock can be obtained.
It also allows for the +/- 0.5% pixel clock variation that the HDMI spec permits.
That code is based on commit 22d0be2a55 ("drm: arcpgu: Allow some clock
deviation in crtc->mode_valid() callback") from Jose Abreu for drm/arc.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Thanks-to: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/162854cb-c7bd-d9ce-9fa0-9a6cd89c621b@xs4all.nl
Merge misc fixes from Andrew Morton:
"17 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
arch: define weak abort()
mm, oom_reaper: fix memory corruption
kernel: make groups_sort calling a responsibility group_info allocators
mm/frame_vector.c: release a semaphore in 'get_vaddr_frames()'
tools/slabinfo-gnuplot: force to use bash shell
kcov: fix comparison callback signature
mm/slab.c: do not hash pointers when debugging slab
mm/page_alloc.c: avoid excessive IRQ disabled times in free_unref_page_list()
mm/memory.c: mark wp_huge_pmd() inline to prevent build failure
scripts/faddr2line: fix CROSS_COMPILE unset error
Documentation/vm/zswap.txt: update with same-value filled page feature
exec: avoid gcc-8 warning for get_task_comm
autofs: fix careless error in recent commit
string.h: workaround for increased stack usage
mm/kmemleak.c: make cond_resched() rate-limiting more efficient
lib/rbtree,drm/mm: add rbtree_replace_node_cached()
include/linux/idr.h: add #include <linux/bug.h>
Add a variant of rbtree_replace_node() that maintains the leftmost cache
of struct rbtree_root_cached when replacing nodes within the rbtree.
As drm_mm is the only rb_replace_node() being used on an interval tree,
the mistake looks fairly self-contained. Furthermore the only user of
drm_mm_replace_node() is its testsuite...
Testcase: igt/drm_mm/replace
Link: http://lkml.kernel.org/r/20171122100729.3742-1-chris@chris-wilson.co.uk
Link: https://patchwork.freedesktop.org/patch/msgid/20171109212435.9265-1-chris@chris-wilson.co.uk
Fixes: f808c13fd3 ("lib/interval_tree: fast overlap detection")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
