Using this code on A5xx (and probably older too) causes a
smmu bug.
Fixes: 474dadb8b0 ("drm/msm/a6xx: Add support for using system cache(LLC)")
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Using the GPU with a VRAM Carveout is a security vulnerability.
Nevertheless it is sometimes required, especially when no IOMMU
implementation is available for a certain platform.
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
vram.size is needed when binding a gpu without an iommu and is defined
in msm_init_vram(), so run that before binding it.
Signed-off-by: Craig Tatlor <ctatlor97@gmail.com>
Reviewed-by: Brian Masney <masneyb@onstation.org>
Tested-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
irq_hpd event can only be executed at connected state. Therefore
irq_hpd event should be postponed if it happened at connection
pending state. This patch also make sure both link rate and lane
are valid before start link training.
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Drivers are not supposed to use this directly any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/412156/
Drivers are not supposed to init the page pool directly any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/412153/
It is observed 'use-after-free' on the dmabuf's file->f_inode with the
race between closing the dmabuf file and reading the dmabuf's debug
info.
Consider the below scenario where P1 is closing the dma_buf file
and P2 is reading the dma_buf's debug info in the system:
P1 P2
dma_buf_debug_show()
dma_buf_put()
__fput()
file->f_op->release()
dput()
....
dentry_unlink_inode()
iput(dentry->d_inode)
(where the inode is freed)
mutex_lock(&db_list.lock)
read 'dma_buf->file->f_inode'
(the same inode is freed by P1)
mutex_unlock(&db_list.lock)
dentry->d_op->d_release()-->
dma_buf_release()
.....
mutex_lock(&db_list.lock)
removes the dmabuf from the list
mutex_unlock(&db_list.lock)
In the above scenario, when dma_buf_put() is called on a dma_buf, it
first frees the dma_buf's file->f_inode(=dentry->d_inode) and then
removes this dma_buf from the system db_list. In between P2 traversing
the db_list tries to access this dma_buf's file->f_inode that was freed
by P1 which is a use-after-free case.
Since, __fput() calls f_op->release first and then later calls the
d_op->d_release, move the dma_buf's db_list removal from d_release() to
f_op->release(). This ensures that dma_buf's file->f_inode is not
accessed after it is released.
Cc: <stable@vger.kernel.org> # 5.4.x-
Fixes: 4ab59c3c63 ("dma-buf: Move dma_buf_release() from fops to dentry_ops")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1609857399-31549-1-git-send-email-charante@codeaurora.org
drm/i915 fixes for v5.11-rc3:
- Use per-connector PM QoS tracking for DP aux communication
- GuC firmware fix for older Cometlakes
- Clear the gpu reloc and shadow batches
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/877dop18zf.fsf@intel.com
amd-drm-fixes-5.11-2021-01-06:
amdgpu:
- Telemetry fix for VGH
- Powerplay fixes for RV
- Powerplay fixes for RN
- RAS fixes for Sienna Cichlid
- Blank screen regression fix
- Drop DCN support for aarch64
- Misc other fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210106222721.3934-1-alexander.deucher@amd.com
This reverts commit a135a1b4c4.
This leads to blank screens on some boards after replugging a
display. Revert until we understand the root cause and can
fix both the leak and the blank screen after replug.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211033
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1427
Cc: Stylon Wang <stylon.wang@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Andre Tomt <andre@tomt.net>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
From Ard:
"Simply disabling -mgeneral-regs-only left and right is risky, given that
the standard AArch64 ABI permits the use of FP/SIMD registers anywhere,
and GCC is known to use SIMD registers for spilling, and may invent
other uses of the FP/SIMD register file that have nothing to do with the
floating point code in question. Note that putting kernel_neon_begin()
and kernel_neon_end() around the code that does use FP is not sufficient
here, the problem is in all the other code that may be emitted with
references to SIMD registers in it.
So the only way to do this properly is to put all floating point code in
a separate compilation unit, and only compile that unit with
-mgeneral-regs-only."
Disable support until the code can be properly refactored to support this
properly on aarch64.
Acked-by: Will Deacon <will@kernel.org>
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
added I2C address and asic support flag
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
old code wrongly used the bad page status as the function return value,
which cause amdgpu_ras_badpages_read always return failed.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Navi12 HDCP & DTM deinitialization needs continue to free bo if already
created though initialized flag is not set.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jiawei Gu <Jiawei.Gu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some of the newly added code is hidden inside of #ifdef
blocks, but one variable is unused when debugfs is disabled:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:8370:8: error: unused variable 'configure_crc' [-Werror,-Wunused-variable]
Change the #ifdef to an if(IS_ENABLED()) check to fix the warning
and avoid adding more #ifdefs.
Fixes: c920888c60 ("drm/amd/display: Expose new CRC window property")
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to improve the fine grain tuning function for RV/RV2/PCO.
The fine grain tuning function uses the sysfs node -- pp_od_clk_voltage
to config gfxclk. Meanwhile, another sysfs
node -- power_dpm_force_perfomance_level also affects the gfx clk.
It will cause confusion when these two sysfs nodes works
together. So this patch adds one flag to avoid this confusion, the flag
will make these two sysfs nodes work separately.
The flag is set as "disabled" by default, so the fine grain tuning function
will be disabled by default.
Only when power_dpm_force_perfomance_level is changed to
"manual" mode, the flag will be set as "enabled",
and the fine grain tuning function will be enabled.
In other profile modes, including "auto", "high", "low",
"profile_peak", "profile_standard", "profile_min_sclk",
"profile_min_mclk", the flag will be set as "disabled",
and the od range of fine grain tuning function will
be restored default value.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to fix the failure when change power profile to
"profile_peak" for renoir.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When GFXOFF is enabled and GPU is idle, driver will fail to access some
registers. Therefore change to disable power gating before all access
registers with MMIO.
Dmesg log is as following:
amdgpu 0000:03:00.0: amdgpu: amdgpu: finishing device.
amdgpu: cp queue pipe 4 queue 0 preemption failed
amdgpu 0000:03:00.0: amdgpu: failed to write reg 2890 wait reg 28a2
amdgpu 0000:03:00.0: amdgpu: failed to write reg 1a6f4 wait reg 1a706
amdgpu 0000:03:00.0: amdgpu: failed to write reg 2890 wait reg 28a2
amdgpu 0000:03:00.0: amdgpu: failed to write reg 1a6f4 wait reg 1a706
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
global noretry setting is cached to gmc.noretry
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sienna cichlid interfaces with RAS eeprom on I2C controller port 1
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to improve the fine grain tuning function for RV/RV2/PCO.
This patch adds two new commands: "restore" and "commit".
This function uses the pp_od_clk_voltage sysfs file to configure the min
and max value of gfx clock frequency manually or restore the default value.
Command guide:
echo "s level value" > pp_od_clk_voltage
"s" - set the sclk frequency
"level" - 0 or 1, "0" represents the min value, "1" represents
the max value
"value" - the target value of sclk frequency, it should be limited in the
safe range
echo "r" > pp_od_clk_voltage
"r" - reset the sclk frequency, restore the default value instantly
echo "c" > pp_od_clk_voltage
"c" - commit the min and max value of sclk frequency to the system
only after the commit command, the target values set by "s" command
will take effect.
Example:
1)change power profile from "auto" to "manual"
$ cat power_dpm_force_performance_level
auto
$ echo "manual" > power_dpm_force_performance_level
$ cat power_dpm_force_performance_level
manual
2)check the default sclk frequency
$ cat pp_od_clk_voltage
OD_SCLK:
0: 200Mhz
1: 1400Mhz
OD_RANGE:
SCLK: 200MHz 1400MHz
3)use "s" -- set command to configure the min and max sclk frequency
$ echo "s 0 600" > pp_od_clk_voltage
$ echo "s 1 1000" > pp_od_clk_voltage
$ echo "c" > pp_od_clk_voltage
$ cat pp_od_clk_voltage
OD_SCLK:
0: 600Mhz
1: 1000Mhz
OD_RANGE:
SCLK: 200MHz 1400MHz
4)use "r" -- reset command to restore the min or max sclk frequency
$ echo "r" > pp_od_clk_voltage
$ cat pp_od_clk_voltage
OD_SCLK:
0: 200Mhz
1: 1400Mhz
OD_RANGE:
SCLK: 200MHz 1400MHz
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to correct the sensor value of power for vangogh.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since multiple connectors may run intel_dp_aux_xfer conncurrently, a
single global pm_qos does not suffice. (One connector may disable the
dma-latency boost prematurely while the second is still depending on
it.) Instead of a single global pm_qos, track the pm_qos request for
each intel_dp.
v2: Move the pm_qos setup/teardown to intel_dp_aux_init/fini
Fixes: 9ee32fea5f ("drm/i915: irq-drive the dp aux communication")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201230202309.23982-1-chris@chris-wilson.co.uk
(cherry picked from commit b3304591f1)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When splitting the Coffeelake define to also identify Cometlakes, I
missed the double fw_def for Coffeelake. That is only newer Cometlakes
use the cml specific guc firmware, older Cometlakes should use kbl
firmware.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2859
Fixes: 5f4ae2704d ("drm/i915: Identify Cometlake platform")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v5.9+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201229120828.29931-1-chris@chris-wilson.co.uk
(cherry picked from commit 70960ab275)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The reloc batch is short lived but can exist in the user visible ppGTT,
and since it's backed by an internal object, which lacks page clearing,
we should take care to clear it upfront.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201224151358.401345-2-matthew.auld@intel.com
Cc: stable@vger.kernel.org
(cherry picked from commit 26ebc511e7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The shadow batch is an internal object, which doesn't have any page
clearing, and since the batch_len can be smaller than the object, we
should take care to clear it.
Testcase: igt/gen9_exec_parse/shadow-peek
Fixes: 4f7af1948a ("drm/i915: Support ro ppgtt mapped cmdparser shadow buffers")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201224151358.401345-1-matthew.auld@intel.com
Cc: stable@vger.kernel.org
(cherry picked from commit eeb52ee6c4)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
- Fix recently introduced crash in the intel_pstate driver that
occurs if scale-invariance is disabled during resume from
suspend-to-RAM due to inconsistent changes of APERF or MPERF
MSR values made by the platform firmware (Rafael Wysocki).
- Fix a memory leak and add a missing clk_put() in error paths in
the OPP framework (Quanyang Wang, Viresh Kumar).
- Add new C-states table for SnowRidge processors to the intel_idle
driver (Artem Bityutskiy).
- Update the MAINTAINERS entry for cpuidle to make it clear that
the governors are covered by it too (Lukas Bulwahn).
-----BEGIN PGP SIGNATURE-----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=51jM
-----END PGP SIGNATURE-----
Merge tag 'pm-5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a crash in intel_pstate during resume from suspend-to-RAM
that may occur after recent changes and two resource leaks in error
paths in the operating performance points (OPP) framework, add a new
C-states table to intel_idle and update the cpuidle MAINTAINERS entry
to cover the governors too.
Specifics:
- Fix recently introduced crash in the intel_pstate driver that
occurs if scale-invariance is disabled during resume from
suspend-to-RAM due to inconsistent changes of APERF or MPERF MSR
values made by the platform firmware (Rafael Wysocki).
- Fix a memory leak and add a missing clk_put() in error paths in the
OPP framework (Quanyang Wang, Viresh Kumar).
- Add new C-states table for SnowRidge processors to the intel_idle
driver (Artem Bityutskiy).
- Update the MAINTAINERS entry for cpuidle to make it clear that the
governors are covered by it too (Lukas Bulwahn)"
* tag 'pm-5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_idle: add SnowRidge C-state table
cpufreq: intel_pstate: Fix fast-switch fallback path
opp: Call the missing clk_put() on error
opp: fix memory leak in _allocate_opp_table
MAINTAINERS: include governors into CPU IDLE TIME MANAGEMENT FRAMEWORK
This is a load of driver fixes (12 ufs, 1 mpt3sas, 1 cxgbi). The big
core two fixes are for power management ("block: Do not accept any
requests while suspended" and "block: Fix a race in the runtime power
management code") which finally sorts out the resume problems we've
occasionally been having. To make the resume fix, there are seven
necessary precursors which effectively renames REQ_PREEMPT to REQ_PM,
so every "special" request in block is automatically a power
management exempt one. All of the non-PM preempt cases are removed
except for the one in the SCSI Parallel Interface (spi) domain
validation which is a genuine case where we have to run requests at
high priority to validate the bus so this becomes an autopm get/put
protected request.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX+98LyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYvLAP9K+HBT
Lrkt3VWc9gq6F36+QH/SeW8IyXGaj77ysFHXxwD/UambRjRK8IA24mvf9sWeLLj6
p8CqCHUkCXqP48IiymE=
=NHrx
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a load of driver fixes (12 ufs, 1 mpt3sas, 1 cxgbi).
The big core two fixes are for power management ("block: Do not accept
any requests while suspended" and "block: Fix a race in the runtime
power management code") which finally sorts out the resume problems
we've occasionally been having.
To make the resume fix, there are seven necessary precursors which
effectively renames REQ_PREEMPT to REQ_PM, so every "special" request
in block is automatically a power management exempt one.
All of the non-PM preempt cases are removed except for the one in the
SCSI Parallel Interface (spi) domain validation which is a genuine
case where we have to run requests at high priority to validate the
bus so this becomes an autopm get/put protected request"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (22 commits)
scsi: cxgb4i: Fix TLS dependency
scsi: ufs: Un-inline ufshcd_vops_device_reset function
scsi: ufs: Re-enable WriteBooster after device reset
scsi: ufs-mediatek: Use correct path to fix compile error
scsi: mpt3sas: Signedness bug in _base_get_diag_triggers()
scsi: block: Do not accept any requests while suspended
scsi: block: Remove RQF_PREEMPT and BLK_MQ_REQ_PREEMPT
scsi: core: Only process PM requests if rpm_status != RPM_ACTIVE
scsi: scsi_transport_spi: Set RQF_PM for domain validation commands
scsi: ide: Mark power management requests with RQF_PM instead of RQF_PREEMPT
scsi: ide: Do not set the RQF_PREEMPT flag for sense requests
scsi: block: Introduce BLK_MQ_REQ_PM
scsi: block: Fix a race in the runtime power management code
scsi: ufs-pci: Enable UFSHCD_CAP_RPM_AUTOSUSPEND for Intel controllers
scsi: ufs-pci: Fix recovery from hibernate exit errors for Intel controllers
scsi: ufs-pci: Ensure UFS device is in PowerDown mode for suspend-to-disk ->poweroff()
scsi: ufs-pci: Fix restore from S4 for Intel controllers
scsi: ufs-mediatek: Keep VCC always-on for specific devices
scsi: ufs: Allow regulators being always-on
scsi: ufs: Clear UAC for RPMB after ufshcd resets
...
-----BEGIN PGP SIGNATURE-----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=OvP3
-----END PGP SIGNATURE-----
Merge tag 'block-5.11-2021-01-01' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Two minor block fixes from this last week that should go into 5.11:
- Add missing NOWAIT debugfs definition (Andres)
- Fix kerneldoc warning introduced this merge window (Randy)"
* tag 'block-5.11-2021-01-01' of git://git.kernel.dk/linux-block:
block: add debugfs stanza for QUEUE_FLAG_NOWAIT
fs: block_dev.c: fix kernel-doc warnings from struct block_device changes
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl/vOCwQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpqA7D/9AyFvg16KEgfYCN2OYXU5jyphu7sCCb8Cx
PJ4H+Lf7fWki+/yFdXLxQnuBMGEOYWqtEIPN9CnO/I1ixzOoNugxiFAyerhd/Noh
COg2EUsUrWq/zobYP60wN9pBPnW6EHTnFVA02kMVKunm4d5O5DZWPXy5BwA9yU3u
dE9LoYDjFiaahogi3x+EmYStexxT0FB0d5WTONA7qSFrskeNbyVaYy8mY09jPynG
IbG41fv2n0Zwlcx4XDCebsZ1+08rAGZFhwiq8VBhPNiz7sOud9jW7rRFHXR2FVoo
DsW2npiYHVvOYqkl1HjXw5Mo6p8UKrDEDAIS7OOAHXM9Lz2/YGS9h9ogROccBta2
5er12VaahIEiH05KtxpGv/q+vyJK7Gdqg0jSuSzKHSdSpTS10Ejh82Xo2V6lRedb
gP03ZiDZjLtvh8F5hrWTJqPTtnFDRkY/I7R3WP1Ga7mqajFhpFDMvjvyEMMBCz+K
KGjMfahNo2nzc9nu5M1VjX42tz5VxKjA3N2netxBfDMVB/GpGcQ7xygS85wx7VPn
UUChgqw0aJrrq5slOZEAVqSsBN/wN97+m6uLLdk025CzQngwiw5fkTooakPxnGee
bW9WKMpWBj/ipPXvU5C1tvHk4gxMg+cmxcr6EZ3uaWfE+MC7Xk9c00lNF62CT0Xm
e+0RWRV1ig==
=XYT5
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.11-2021-01-01' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few fixes that should go into 5.11, all marked for stable as well:
- Fix issue around identity COW'ing and users that share a ring
across processes
- Fix a hang associated with unregistering fixed files (Pavel)
- Move the 'process is exiting' cancelation a bit earlier, so
task_works aren't affected by it (Pavel)"
* tag 'io_uring-5.11-2021-01-01' of git://git.kernel.dk/linux-block:
kernel/io_uring: cancel io_uring before task works
io_uring: fix io_sqe_files_unregister() hangs
io_uring: add a helper for setting a ref node
io_uring: don't assume mm is constant across submits
Commit 436e980e2e ("kbuild: don't hardcode depmod path") stopped
hard-coding the path of depmod, but in the process caused trouble for
distributions that had that /sbin location, but didn't have it in the
PATH (generally because /sbin is limited to the super-user path).
Work around it for now by just adding /sbin to the end of PATH in the
depmod.sh script.
Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For cancelling io_uring requests it needs either to be able to run
currently enqueued task_works or having it shut down by that moment.
Otherwise io_uring_cancel_files() may be waiting for requests that won't
ever complete.
Go with the first way and do cancellations before setting PF_EXITING and
so before putting the task_work infrastructure into a transition state
where task_work_run() would better not be called.
Cc: stable@vger.kernel.org # 5.5+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_sqe_files_unregister() uninterruptibly waits for enqueued ref nodes,
however requests keeping them may never complete, e.g. because of some
userspace dependency. Make sure it's interruptible otherwise it would
hang forever.
Cc: stable@vger.kernel.org # 5.6+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Setting a new reference node to a file data is not trivial, don't repeat
it, add and use a helper.
Cc: stable@vger.kernel.org # 5.6+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
trivial fixups for the new msgr2 support.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl/stgUTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi7SECACa5sWn5GKArGNCYesG/Xnbl4FbtorA
QNmDS7z5SBTsxQfOmkIq7Xon9fRxXEpWzr/eCEZKcXc+REHXGsy8zFz/HA0t97SS
tSho288zfEifGK0k2aptBTXAiEnzhIweu9f5ZbxfLN+JPyfynxfvXytdXYFeU/Op
zLUBSjJusmm671APBvyWl/5h/2N7XkpBM3AWNJjaW26+Mft3SpsS8Ui+USWb9SJF
YEmsVR03W2pbSS66a774bThoLP8exfg7xMfUcWRHqYs3Awpp0mwMnKkHMfooYLGA
Cc5FsQ7Exin23B4vCm6+0prg/cgwBg516HfsFH/jTcE2D/PjSCEX7tXE
=ZGwT
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.11-rc2' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A fix for an edge case in MClientRequest encoding and a couple of
trivial fixups for the new msgr2 support"
* tag 'ceph-for-5.11-rc2' of git://github.com/ceph/ceph-client:
libceph: add __maybe_unused to DEFINE_MSGR2_FEATURE
libceph: align session_key and con_secret to 16 bytes
libceph: fix auth_signature buffer allocation in secure mode
ceph: reencode gid_list when reconnecting
Add C-state table for the SnowRidge SoC which is found on Intel Jacobsville
platforms.
The following has been changed.
1. C1E latency changed from 10us to 15us. It was measured using the
open source "wult" tool (the "nic" method, 15us is the 99.99th
percentile).
2. C1E power break even changed from 20us to 25us, which may result
in less C1E residency in some workloads.
3. C6 latency changed from 50us to 130us. Measured the same way as C1E.
The C6 C-state is supported only by some SnowRidge revisions, so add a C-state
table commentary about this.
On SnowRidge, C6 support is enumerated via the usual mechanism: "mwait" leaf of
the "cpuid" instruction. The 'intel_idle' driver does check this leaf, so even
though C6 is present in the table, the driver will only use it if the CPU does
support it.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When sugov_update_single_perf() falls back to the "frequency"
path due to the missing scale-invariance, it will call
cpufreq_driver_fast_switch() via sugov_fast_switch()
and the driver's ->fast_switch() callback will be invoked,
so it must not be NULL.
However, after commit a365ab6b9d ("cpufreq: intel_pstate: Implement
the ->adjust_perf() callback") intel_pstate sets ->fast_switch() to
NULL when it is going to use intel_cpufreq_adjust_perf(), which is a
mistake, because on x86 the scale-invariance may be turned off
dynamically, so modify it to retain the original ->adjust_perf()
callback pointer.
Fixes: a365ab6b9d ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback")
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Tested-by: Kenneth R. Crudup <kenny@panix.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull operating performance points (OPP) framework fixes for 5.11-rc2
from Viresh Kumar:
"This contains two patches to fix freeing of resources in error paths."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: Call the missing clk_put() on error
opp: fix memory leak in _allocate_opp_table
This was missed in 021a24460d. Leads to the numeric value of
QUEUE_FLAG_NOWAIT (i.e. 29) showing up in
/sys/kernel/debug/block/*/state.
Fixes: 021a24460d
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix new kernel-doc warnings in fs/block_dev.c:
../fs/block_dev.c:1066: warning: Excess function parameter 'whole' description in 'bd_abort_claiming'
../fs/block_dev.c:1837: warning: Function parameter or member 'dev' not described in 'lookup_bdev'
Fixes: 4e7b5671c6 ("block: remove i_bdev")
Fixes: 37c3fc9abb ("block: simplify the block device claiming interface")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-fsdevel@vger.kernel.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge misc fixes from Andrew Morton:
"16 patches
Subsystems affected by this patch series: mm (selftests, hugetlb,
pagecache, mremap, kasan, and slub), kbuild, checkpatch, misc, and
lib"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: slub: call account_slab_page() after slab page initialization
zlib: move EXPORT_SYMBOL() and MODULE_LICENSE() out of dfltcc_syms.c
lib/zlib: fix inflating zlib streams on s390
lib/genalloc: fix the overflow when size is too big
kdev_t: always inline major/minor helper functions
sizes.h: add SZ_8G/SZ_16G/SZ_32G macros
local64.h: make <asm/local64.h> mandatory
kasan: fix null pointer dereference in kasan_record_aux_stack
mm: generalise COW SMC TLB flushing race comment
mm/mremap.c: fix extent calculation
mm: memmap defer init doesn't work as expected
mm: add prototype for __add_to_page_cache_locked()
checkpatch: prefer strscpy to strlcpy
Revert "kbuild: avoid static_assert for genksyms"
mm/hugetlb: fix deadlock in hugetlb_cow error path
selftests/vm: fix building protection keys test
