Commit Graph

796142 Commits

Author SHA1 Message Date
Jeff Barnhill
2384d02520 net/ipv6: Add anycast addresses to a global hashtable
icmp6_send() function is expensive on systems with a large number of
interfaces. Every time it’s called, it has to verify that the source
address does not correspond to an existing anycast address by looping
through every device and every anycast address on the device.  This can
result in significant delays for a CPU when there are a large number of
neighbors and ND timers are frequently timing out and calling
neigh_invalidate().

Add anycast addresses to a global hashtable to allow quick searching for
matching anycast addresses.  This is based on inet6_addr_lst in addrconf.c.

Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-02 23:54:56 -07:00
Frieder Schrempf
7b900ead6c usbnet: smsc95xx: disable carrier check while suspending
We need to make sure, that the carrier check polling is disabled
while suspending. Otherwise we can end up with usbnet_read_cmd()
being issued when only usbnet_read_cmd_nopm() is allowed. If this
happens, read operations lock up.

Fixes: d69d169493 ("usbnet: smsc95xx: fix link detection for disabled autonegotiation")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Raghuram Chary J <RaghuramChary.Jallipalli@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-02 23:49:15 -07:00
Mathieu Malaterre
49682bfa1e net: document skb parameter in function 'skb_gso_size_check'
Remove kernel-doc warning:

  net/core/skbuff.c:4953: warning: Function parameter or member 'skb' not described in 'skb_gso_size_check'

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-02 23:34:37 -07:00
Cong Wang
7de414a9dd net: drop skb on failure in ip_check_defrag()
Most callers of pskb_trim_rcsum() simply drop the skb when
it fails, however, ip_check_defrag() still continues to pass
the skb up to stack. This is suspicious.

In ip_check_defrag(), after we learn the skb is an IP fragment,
passing the skb to callers makes no sense, because callers expect
fragments are defrag'ed on success. So, dropping the skb when we
can't defrag it is reasonable.

Note, prior to commit 88078d98d1, this is not a big problem as
checksum will be fixed up anyway. After it, the checksum is not
correct on failure.

Found this during code review.

Fixes: 88078d98d1 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends")
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-01 13:55:30 -07:00
Linus Torvalds
7c6c54b505 Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
 "I2C has a core bugfix & cleanup as well as an ID addition and
  MAINTAINERS update for you"

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  MAINTAINERS: add maintainer for IMX LPI2C driver
  dt-bindings: i2c: i2c-imx-lpi2c: add imx8qxp compatible string
  i2c: Clear client->irq in i2c_device_remove
  i2c: Remove unnecessary call to irq_find_mapping
2018-11-01 09:31:19 -07:00
Linus Torvalds
6444ccfd69 Merge branch 'for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu fixes from Dennis Zhou:
 "Two small things for v4.20.

  The first fixes a clang uninitialized variable warning for arm64 in
  the default path calls BUILD_BUG(). The second removes an unnecessary
  unlikely() in a WARN_ON() use"

* 'for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
  arm64: percpu: Initialize ret in the default case
  mm: percpu: remove unnecessary unlikely()
2018-11-01 09:27:57 -07:00
Linus Torvalds
82aa467151 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) BPF verifier fixes from Daniel Borkmann.

 2) HNS driver fixes from Huazhong Tan.

 3) FDB only works for ethernet devices, reject attempts to install FDB
    rules for others. From Ido Schimmel.

 4) Fix spectre V1 in vhost, from Jason Wang.

 5) Don't pass on-stack object to irq_set_affinity_hint() in mvpp2
    driver, from Marc Zyngier.

 6) Fix mlx5e checksum handling when RXFCS is enabled, from Eric
    Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (49 commits)
  openvswitch: Fix push/pop ethernet validation
  net: stmmac: Fix stmmac_mdio_reset() when building stmmac as modules
  bpf: test make sure to run unpriv test cases in test_verifier
  bpf: add various test cases to test_verifier
  bpf: don't set id on after map lookup with ptr_to_map_val return
  bpf: fix partial copy of map_ptr when dst is scalar
  libbpf: Fix compile error in libbpf_attach_type_by_name
  kselftests/bpf: use ping6 as the default ipv6 ping binary if it exists
  selftests: mlxsw: qos_mc_aware: Add a test for UC awareness
  selftests: mlxsw: qos_mc_aware: Tweak for min shaper
  mlxsw: spectrum: Set minimum shaper on MC TCs
  mlxsw: reg: QEEC: Add minimum shaper fields
  net: hns3: bugfix for rtnl_lock's range in the hclgevf_reset()
  net: hns3: bugfix for rtnl_lock's range in the hclge_reset()
  net: hns3: bugfix for handling mailbox while the command queue reinitialized
  net: hns3: fix incorrect return value/type of some functions
  net: hns3: bugfix for hclge_mdio_write and hclge_mdio_read
  net: hns3: bugfix for is_valid_csq_clean_head()
  net: hns3: remove unnecessary queue reset in the hns3_uninit_all_ring()
  net: hns3: bugfix for the initialization of command queue's spin lock
  ...
2018-11-01 09:16:01 -07:00
Linus Torvalds
ffb845db50 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
Pull sparc fixes from David Miller:
 "Two small fixes"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Wire up compat getpeername and getsockname.
  sparc64: Remvoe set_fs() from perf_callchain_user().
2018-11-01 09:07:04 -07:00
Linus Torvalds
5c99a8d1ed csky: dtb Kbuild fixup patches for linux-4.20-rc1
These patches are complementary to "C-SKY(csky) Port for Linux 4.20" and
 fixup dtb Kbuild to follow the new Devicetree dtb build rules.
 
 Link: https://lore.kernel.org/lkml/CABGGisxiWaQn9qDqpfxEWcckkGJfMzFvSPGvuhQK7oB404-6DQ@mail.gmail.com/
 Signed-off-by: Guo Ren <ren_guo@c-sky.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE2KAv+isbWR/viAKHAXH1GYaIxXsFAlvadMUSHHJlbl9ndW9A
 Yy1za3kuY29tAAoJEAFx9RmGiMV7fN4P/ieygi8RlzFF5PEggQEt1PdvGnte2Kx/
 UUqlX7ZrY/ZY8p/XaG8p0YlWx236YcZoQtTJT4ThVuAFyywuIjR96kWlKwVjeKC2
 /lfXvQrJRSjzQAQU2zRe+KMEvsEw0qEO9WWqV8pORt+t1ZjE59mFov2iK+mcS22R
 T12Djp7V9RYr33KFcu8BQ8g4524t9x3MSGVz+AB/D+cni8XSS3dkg5QlTWo+LGfS
 pHAISI3t1AftXkQ3HRpDKFs9Equ0CX3wm129j6awWHbYBpXsdwUW81fr+KMNgdd/
 s59wcdRInksww5ZaAvtgfxYJeTTyu488KMEMhagDNn3n0El61ui0vncmvPebnmjB
 FQb4v6AvH69V2aN3/xAKuov4EfELoFUc/E0z3GJk//58d6kshMdyI++QB2CFZ8IS
 TqHSkkEKCpThTyJavGuS0Jvkj7vpneW5iDFQwWN0RqIub7PnC6Aa0uSw+/G7Pq/5
 SY2zhEJ0o6waBuQR5IEYzxvRwlU3hNuqXe7/if4kqw/LQUFTydKX7eQAcrSTLlnI
 /jxrXH7vaymhD9/wI58GPIsqaRObln92uaUWHpjQqKPXdnemv60dSta2LLkdY4Le
 MVsTc412nkFjt4Ft+uOrcJQnVsK48RTh56vBB44zxONoK9tUz0y6wgIEyebwzRSy
 uYaZ6t0jj7A3
 =TO13
 -----END PGP SIGNATURE-----

Merge tag 'csky-for-linus-4.20-fixup-dtb' of https://github.com/c-sky/csky-linux

Pull csky dtb fixups from Guo Ren:
 "These fix the csky dtb Kbuild to follow the new Devicetree dtb build
  rules"

* tag 'csky-for-linus-4.20-fixup-dtb' of https://github.com/c-sky/csky-linux:
  csky: use common dtb build rules
  csky: remove builtin-dtb Kbuild
2018-11-01 09:04:30 -07:00
Linus Torvalds
eb7046e9bf platform-drivers-x86 for v4.20-1
Move the Dell dcdbas and dell_rbu drivers into platform/drivers/x86 as
 they are closely coupled with other drivers in this location.
 
 Improve _init* usage for acerhdf and fix some usage issues with messages
 and module parameters.
 
 Simplify asus-wmi by calling ACPI/WMI methods directly, eliminating
 workqueue overhead, eliminate double reporting of keyboard backlight.
 
 Fix wake from USB failure on Bay Trail devices (intel_int0002_vgpio).
 
 Notify intel_telemetry users when IPC1 device is not enabled.
 
 Update various drivers with new laptop model IDs.
 
 Update several intel drivers to use SPDX identifers and order headers
 alphabetically.
 
 The following is an automated git shortlog grouped by driver:
 
 Add Intel AtomISP2 dummy / power-management driver:
  - Add Intel AtomISP2 dummy / power-management driver
 
 lg-laptop:
  - Add LG Gram laptop special features driver
 
 HID:
  -  asus: only support backlight when it's not driven by WMI
 
 MAINTAINERS:
  -  intel_telemetry: Update maintainers info
  -  intel_pmc_core: Update MAINTAINERS
  -  Update maintainer for dcdbas and dell_rbu
  -  Use my infradead account exclusively for PDx86 work
 
 acerhdf:
  -  restructure to allow large BIOS table be __initconst
  -  mark appropriate content with __init prefix
  -  Add BIOS entry for Gateway LT31 v1.3307
  -  Remove cut-and-paste trap from instructions
  -  Enable ability to list supported systems
  -  clarify modinfo messages for BIOS override
 
 asus-wmi:
  -  export function for evaluating WMI methods
  -  Only notify kbd LED hw_change by fn-key pressed
  -  Simplify the keyboard brightness updating process
 
 firmware:
  -  dcdbas: include linux/io.h
  -  dcdbas: Move dcdbas to drivers/platform/x86
  -  dell_rbu: Move dell_rbu to drivers/platform/x86
  -  dcdbas: Add support for WSMT ACPI table
  -  dell_rbu: Make payload memory uncachable
 
 ideapad-laptop:
  -  Add Y530-15ICH to no_hw_rfkill
  -  Use __func__ instead of read_ec_cmd in pr_err
 
 intel-hid:
  -  Convert to use SPDX identifier
 
 intel-ips:
  -  Convert to use SPDX identifier
 
 intel-rst:
  -  Convert to use SPDX identifier
  -  Sort headers alphabetically
 
 intel-smartconnect:
  -  Convert to use SPDX identifier
  -  Sort headers alphabetically
 
 intel-wmi-thunderbolt:
  -  Add dynamic debugging
  -  Convert to use SPDX identifier
 
 intel_bxtwc_tmu:
  -  Convert to use SPDX identifier
 
 intel_cht_int33fe:
  -  Convert to use SPDX identifier
 
 intel_chtdc_ti_pwrbtn:
  -  Add SPDX identifier
 
 intel_int0002_vgpio:
  -  Convert to use SPDX identifier
  -  Implement irq_set_wake
  -  Enable the driver on Bay Trail platforms
 
 intel_menlow:
  -  Convert to use SPDX identifier
  -  Sort headers alphabetically
 
 intel_mid_powerbtn:
  -  Convert to use SPDX identifier
  -  Remove unnecessary init.h inclusion
  -  Get rid of custom ICPU() macro
 
 intel_mid_thermal:
  -  Convert to use SPDX identifier
  -  Sort headers alphabetically
 
 intel_oaktrail:
  -  Convert to use SPDX identifier
  -  Sort headers alphabetically
 
 intel_pmc:
  -  Convert to use SPDX identifier
  -  Sort headers alphabetically
 
 intel_punit_ipc:
  -  Convert to use SPDX identifier
  -  Sort headers alphabetically
 
 intel_scu_ipc:
  -  Convert to use SPDX identifier
  -  Sort headers alphabetically
 
 intel_telemetry:
  -  Get rid of custom macro
  -  report debugfs failure
  -  Convert to use SPDX identifier
 
 intel_turbo_max_3:
  -  Convert to use SPDX identifier
  -  Sort headers alphabetically
 
 mlx-platform:
  -  Properly use mlxplat_mlxcpld_msn201x_items
 
 touchscreen_dmi:
  -  Add min-x and min-y settings for various models
  -  Add info for the Onda V80 Plus v3 tablet
  -  Add info for the Trekstor Primetab T13B tablet
  -  Add info for the Trekstor Primebook C11 convertible
 
 tracing:
  -  Trivia spelling fix containerof() -> container_of()
 
 wmi:
  -  declare device_type structure as constant
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJb2mDCAAoJEKbMaAwKp364KdkH/Rar8cenw7uFeVzT5o4fGzTn
 0Oo1Pnwh+hPgmQwmf8O/mHsa/1Zb9nX4nNLU/ysDUjAAZ9wZLoB57HlImQquPA74
 c8lXTz5MVF140WB1f1Ck5PmeonJR2Xve7HTYCoBmGo71jOxHxCgJbp1Giiho0Imd
 3NXzzahEnAiy/L5PhqqYTmIfTeAHQ2Fo7GkHCjMnS20FP2fBtvPrc7db03F+FZ4y
 QTfbT0oR42NdeW21AbCRGY3P47axB3xDJX4LOYrb4uo4CIzd1yatlHk407NRRyv8
 pab6aeJR23FouA/tcvv+T36D3vqRw78e6BWdoyowWOd7CUOgjtSC3lKGzfT6hSY=
 =0BDZ
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v4.20-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Darren Hart:

 - Move the Dell dcdbas and dell_rbu drivers into platform/drivers/x86
   as they are closely coupled with other drivers in this location.

 - Improve _init* usage for acerhdf and fix some usage issues with
   messages and module parameters.

 - Simplify asus-wmi by calling ACPI/WMI methods directly, eliminating
   workqueue overhead, eliminate double reporting of keyboard backlight.

 - Fix wake from USB failure on Bay Trail devices (intel_int0002_vgpio).

 - Notify intel_telemetry users when IPC1 device is not enabled.

 - Update various drivers with new laptop model IDs.

 - Update several intel drivers to use SPDX identifers and order headers
   alphabetically.

* tag 'platform-drivers-x86-v4.20-1' of git://git.infradead.org/linux-platform-drivers-x86: (64 commits)
  HID: asus: only support backlight when it's not driven by WMI
  platform/x86: asus-wmi: export function for evaluating WMI methods
  platform/x86: asus-wmi: Only notify kbd LED hw_change by fn-key pressed
  platform/x86: wmi: declare device_type structure as constant
  platform/x86: ideapad: Add Y530-15ICH to no_hw_rfkill
  platform/x86: Add Intel AtomISP2 dummy / power-management driver
  platform/x86: touchscreen_dmi: Add min-x and min-y settings for various models
  platform/x86: touchscreen_dmi: Add info for the Onda V80 Plus v3 tablet
  platform/x86: touchscreen_dmi: Add info for the Trekstor Primetab T13B tablet
  platform/x86: intel_telemetry: Get rid of custom macro
  platform/x86: intel_telemetry: report debugfs failure
  MAINTAINERS: intel_telemetry: Update maintainers info
  platform/x86: Add LG Gram laptop special features driver
  platform/x86: asus-wmi: Simplify the keyboard brightness updating process
  platform/x86: touchscreen_dmi: Add info for the Trekstor Primebook C11 convertible
  platform/x86: mlx-platform: Properly use mlxplat_mlxcpld_msn201x_items
  MAINTAINERS: intel_pmc_core: Update MAINTAINERS
  firmware: dcdbas: include linux/io.h
  platform/x86: intel-wmi-thunderbolt: Add dynamic debugging
  platform/x86: intel-wmi-thunderbolt: Convert to use SPDX identifier
  ...
2018-11-01 08:42:21 -07:00
Guo Ren
e8d0c9a726 csky: use common dtb build rules
Remove the Kbuild rules in arch/csky and use common dtb build rules.

This modification is based on:

commit 37c8a5fafa ("kbuild: consolidate Devicetree dtb build rules")

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2018-11-01 10:52:27 +08:00
Guo Ren
c4c14c3bd1 csky: remove builtin-dtb Kbuild
Remove the builtin-dtb implementation in arch/csky.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2018-11-01 10:52:26 +08:00
Jaime Caamaño Ruiz
46ebe2834b openvswitch: Fix push/pop ethernet validation
When there are both pop and push ethernet header actions among the
actions to be applied to a packet, an unexpected EINVAL (Invalid
argument) error is obtained. This is due to mac_proto not being reset
correctly when those actions are validated.

Reported-at:
https://mail.openvswitch.org/pipermail/ovs-discuss/2018-October/047554.html
Fixes: 91820da6ae ("openvswitch: add Ethernet push and pop actions")
Signed-off-by: Jaime Caamaño Ruiz <jcaamano@suse.com>
Tested-by: Greg Rose <gvrose8192@gmail.com>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 18:37:16 -07:00
Niklas Cassel
30549aab14 net: stmmac: Fix stmmac_mdio_reset() when building stmmac as modules
When building stmmac, it is only possible to select CONFIG_DWMAC_GENERIC,
or any of the glue drivers, when CONFIG_STMMAC_PLATFORM is set.
The only exception is CONFIG_STMMAC_PCI.

When calling of_mdiobus_register(), it will call our ->reset()
callback, which is set to stmmac_mdio_reset().

Most of the code in stmmac_mdio_reset() is protected by a
"#if defined(CONFIG_STMMAC_PLATFORM)", which will evaluate
to false when CONFIG_STMMAC_PLATFORM=m.

Because of this, the phy reset gpio will only be pulled when
stmmac is built as built-in, but not when built as modules.

Fix this by using "#if IS_ENABLED()" instead of "#if defined()".

Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 18:35:58 -07:00
David S. Miller
1f2b5b8e2d sparc64: Wire up compat getpeername and getsockname.
Fixes: 8b30ca73b7 ("sparc: Add all necessary direct socket system calls.")
Reported-by: Joseph Myers  <joseph@codesourcery.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 18:30:21 -07:00
David S. Miller
4d3163cf87 Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2018-10-31

This series contains a various collection of fixes.

Miroslav Lichvar from Red Hat or should I say IBM now?  Updates the PHC
timecounter interval for igb so that it gets updated at least once
every 550 seconds.

Ngai-Mint provides a fix for fm10k to prevent a soft lockup or system
crash by adding a new condition to determine if the SM mailbox is in the
correct state before proceeding.

Jake provides several fm10k fixes, first one marks complier aborts as
non-fatal since on some platforms trigger machine check errors when the
compile aborts.  Added missing device ids to the in-kernel driver.  Due
to the recent fixes, bumped the driver version.

I (Jeff Kirsher) fixed a XFRM_ALGO dependency for both ixgbe and
ixgbevf.  This fix was based on the original work from Arnd Bergmann,
which only fixed ixgbe.

Mitch provides a fix for i40e/avf to update the status codes, which
resolves an issue between a mis-match between i40e and the iavf driver,
which also supports the ice LAN driver.

Radoslaw fixes the ixgbe where the driver is logging a message about
spoofed packets detected when the VF is re-started with a different MAC
address.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 18:21:37 -07:00
David S. Miller
df975da4e5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2018-11-01

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix tcp_bpf_recvmsg() to return -EAGAIN instead of 0 in non-blocking
   case when no data is available yet, from John.

2) Fix a compilation error in libbpf_attach_type_by_name() when compiled
   with clang 3.8, from Andrey.

3) Fix a partial copy of map pointer on scalar alu and remove id
   generation for RET_PTR_TO_MAP_VALUE return types, from Daniel.

4) Add unlimited memlock limit for kernel selftest's flow_dissector_load
   program, from Yonghong.

5) Fix ping for some BPF shell based kselftests where distro does not
   ship "ping -6" anymore, from Li.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 17:34:08 -07:00
Alexei Starovoitov
dfeb8f4c96 Merge branch 'verifier-fixes'
Daniel Borkmann says:

====================
The series contains two fixes in BPF core and test cases. For details
please see individual patches. Thanks!
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-31 16:53:18 -07:00
Daniel Borkmann
832c6f2c29 bpf: test make sure to run unpriv test cases in test_verifier
Right now unprivileged tests are never executed as a BPF test run,
only loaded. Allow for running them as well so that we can check
the outcome and probe for regressions.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-31 16:53:17 -07:00
Daniel Borkmann
2683f4128c bpf: add various test cases to test_verifier
Add some more map related test cases to test_verifier kselftest
to improve test coverage. Summary: 1012 PASSED, 0 SKIPPED, 0 FAILED

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-31 16:53:17 -07:00
Daniel Borkmann
4d31f30148 bpf: don't set id on after map lookup with ptr_to_map_val return
In the verifier there is no such semantics where registers with
PTR_TO_MAP_VALUE type have an id assigned to them. This is only
used in PTR_TO_MAP_VALUE_OR_NULL and later on nullified once the
test against NULL has been pattern matched and type transformed
into PTR_TO_MAP_VALUE.

Fixes: 3e6a4b3e02 ("bpf/verifier: introduce BPF_PTR_TO_MAP_VALUE")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Roman Gushchin <guro@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-31 16:53:17 -07:00
Daniel Borkmann
0962590e55 bpf: fix partial copy of map_ptr when dst is scalar
ALU operations on pointers such as scalar_reg += map_value_ptr are
handled in adjust_ptr_min_max_vals(). Problem is however that map_ptr
and range in the register state share a union, so transferring state
through dst_reg->range = ptr_reg->range is just buggy as any new
map_ptr in the dst_reg is then truncated (or null) for subsequent
checks. Fix this by adding a raw member and use it for copying state
over to dst_reg.

Fixes: f1174f77b5 ("bpf/verifier: rework value tracking")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Edward Cree <ecree@solarflare.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-31 16:53:17 -07:00
Linus Torvalds
5b7449810a chrome-platform for v4.20
* Move mfd/cros_ec_lpc* includes to drivers/platform from mfd
 * Adding a new interrupt path for cros_ec_lpc
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE6gYDF28Li+nEiKLaHwn1ewov5lgFAlvaNx8ACgkQHwn1ewov
 5li9/g//apJnCEFTCNoxsQlqj15io3Osogpm3uPw85u5OzkSgs9aSTTlzjcf6gYO
 nowl2vn009fI0vPEdOqIj1KOw2F2ATHyRFXl4Ap0HOF8eERGKS46SLSy93cUvdxc
 rAeHY23lJ/3/7nrJTMnIbFxpukNR7RgoXPlGRb3Gj6me879nTNr68YU48lvTJIM1
 dS5m19joL/JnR93iPZwf9PTI6C95eYFgalCMfwBYDAhk4sk7Ovk1LMsoLh9vT1i2
 xBW16AaF0CgEJbiCc57ktbN/Fkt/tdcdiZmn+hvXvRFOOu3HDXvoXOJa/IxBgruk
 mgVzvBordNIiSdPN9T4Cof17NJiU58RtcfFe+GuftUJ8S5NSPQbelch+Pfa+cknn
 zvEwv/0rLWvWmu1cmkHCLq2QdHxaNIiGMuIxIDZfhihGn1kTcD/FTgX5nt3hVYRk
 yVSKe/1ed6yCnYvSQ6x3uprBGpMayJCaSco/lQzWX6Iqe6eEXOYxm43YsQmddPLA
 jnzJlmfuAb6lyvdgD5mrGkV/3/GdYp/t5OUUefTnhPWsfS1l/aaqeDvyVNuqsMGp
 EyeYz+9Nilc17G8iuXw272/YZF6JhL7CO7vjxKqyRIaDUjj2HBzMUZ+NrgPg08AJ
 MHRBltRT/LayKg5e/9tKylF1UhstMli7sldX6qRXL1A8q6vYWC4=
 =cmQo
 -----END PGP SIGNATURE-----

Merge tag 'tag-chrome-platform-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform

Pull chrome-platform updates from Benson Leung:

 - Move mfd/cros_ec_lpc* includes to drivers/platform from mfd

 - Adding a new interrupt path for cros_ec_lpc

* tag 'tag-chrome-platform-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
  platform/chrome: chromeos_tbmc - Remove unneeded const
  platform/chrome: Add a new interrupt path for cros_ec_lpc
  mfd: cros_ec: Fix and improve kerneldoc comments.
  platform/chrome: Move mfd/cros_ec_lpc* includes to drivers/platform.
2018-10-31 16:47:55 -07:00
A.s. Dong
012ebc3b78 MAINTAINERS: add maintainer for IMX LPI2C driver
The LPI2C is used in IMX7ULP/MX8 SoCs.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-10-31 23:37:34 +00:00
A.s. Dong
69819c7fc8 dt-bindings: i2c: i2c-imx-lpi2c: add imx8qxp compatible string
Add imx8qxp compatible string

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-10-31 23:36:43 +00:00
Charles Keepax
6f108dd70d i2c: Clear client->irq in i2c_device_remove
The IRQ will be mapped in i2c_device_probe only if client->irq is zero and
i2c_device_remove does not clear this. When rebinding an I2C device,
whos IRQ provider has also been rebound this means that an IRQ mapping
will never be created, causing the I2C device to fail to acquire its
IRQ. Fix this issue by clearing client->irq in i2c_device_remove,
forcing i2c_device_probe to lookup the mapping again.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-10-31 23:33:34 +00:00
Charles Keepax
b9bb3fdf4e i2c: Remove unnecessary call to irq_find_mapping
irq_create_mapping calls irq_find_mapping internally and will use the
found mapping if one exists, so there is no need to manually call this
from i2c_smbus_host_notify_to_irq.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-10-31 23:33:14 +00:00
Linus Torvalds
3dca04d694 RISC-V Patches for the 4.20 Merge Window, Part 2 v2
This tag contains the follow-on patches I'd like to target for the 4.20
 merge window.  I'm being somewhat conservative here, as while there are
 a few patches on the mailing list that were posted early in the merge
 window I'd like to let those bake for another round -- this was a fairly
 big release as far as RISC-V is concerened, and we need to walk before
 we can run.
 
 As far as the patches that made it go:
 
 * A patch to ignore offline CPUs when calculating AT_HWCAP.  This should
   fix GDB on the HiFive unleashed, which has an embedded core for hart
   0 which is exposed to Linux as an offline CPU.
 * A move of EM_RISCV to elf-em.h, which is where it should have been to
   begin with.
 * I've also removed the 64-bit divide routines.  I know I'm not really
   playing by my own rules here because I posted the patches this
   morning, but since they shouldn't be in the kernel I think it's better
   to err on the side of going too fast here.
 
 I don't anticipate any more patch sets for the merge window.
 
 Changes since v1:
 
 * Use a consistent base to merge from so the history isn't a mess.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEAM520YNJYN/OiG3470yhUCzLq0EFAlvZ//ITHHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRDvTKFQLMurQaOqEACpJTs19+1HFQ/YSB4P+drIImDq9XNF
 OFElcqe+R961BnyHJUA4WObl0Bl9bDqciYhelwdeb/0gYaOBG5IsmwAKxN9N2f9d
 m2/3eVUyiwMDKsc8Mrdcu7e3TLvfnhfaSOVe9hDvVcSeZvaC4S+dr+b7gjOZd45o
 52SQqj6TMh20g5h6knaU5wnhHriJH7U4MwiEmwSTZuUkKj8Uoa1HGyzuVqqhi6A2
 3y0m4VmVTwS9dmork2xZdsif+POSxrRxdtMTMWf85FelSO1OdTeMemUx2WnnWlCU
 5VoPF5upXWB6uVtgXAVC8yhjCke5mUIOMcO10UGXdcjS/q9Vfg0yt6LusijTmYec
 UznnpnkPOap3t6tb+dkRanP+BRphB6A9DpXUkiGGo2nwbi48OC+pTYjZMdRUX7r3
 FHq3LknprDfK6+D6goftlXlYSmb8H2rSCubK5dv6Zq9/rkBAkN/ESo9HEXvtPrAh
 oQAU1kmjq1EQg87fpmMvVySLApj+YPCoNMaPn3be03JRup4vaoGo8obmVP7rqgAG
 BIq6gx2BqqWWNvJftFm85AurTC1K3ClLO0mgTD5zhHvaCTHNI0TLlYh58QcKU00j
 c6+u+6tMF00Nvk8n/cbC/hRc2T+oAGb6hr6pFQEhANAkMu9dYpYfOWRbYl7Iiszq
 J3eT+7rxvHXCpg==
 =9Lsg
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-4.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull more RISC-V updates from Palmer Dabbelt:
 "This contains the follow-on patches I'd like to target for the 4.20
  merge window. I'm being somewhat conservative here, as while there are
  a few patches on the mailing list that were posted early in the merge
  window I'd like to let those bake for another round -- this was a
  fairly big release as far as RISC-V is concerened, and we need to walk
  before we can run.

  As far as the patches that made it go:

   - A patch to ignore offline CPUs when calculating AT_HWCAP. This
     should fix GDB on the HiFive unleashed, which has an embedded core
     for hart 0 which is exposed to Linux as an offline CPU.

   - A move of EM_RISCV to elf-em.h, which is where it should have been
     to begin with.

   - I've also removed the 64-bit divide routines. I know I'm not really
     playing by my own rules here because I posted the patches this
     morning, but since they shouldn't be in the kernel I think it's
     better to err on the side of going too fast here.

  I don't anticipate any more patch sets for the merge window"

* tag 'riscv-for-linus-4.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  Move EM_RISCV into elf-em.h
  RISC-V: properly determine hardware caps
  Revert "lib: Add umoddi3 and udivmoddi4 of GCC library routines"
  Revert "RISC-V: Select GENERIC_LIB_UMODDI3 on RV32"
2018-10-31 16:20:28 -07:00
Linus Torvalds
9bb9d4fdce Merge branch 'for-linus-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:

 - removal of old and dead code

 - a bug fix for our tty driver

 - other minor cleanups across the code base

* 'for-linus-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Make line/tty semantics use true write IRQ
  um: trap: fix spelling mistake, EACCESS -> EACCES
  um: Don't hardcode path as it is architecture dependent
  um: NULL check before kfree is not needed
  um: remove unused AIO code
  um: Give start_idle_thread() a return code
  um: Remove update_debugregs()
  um: Drop own definition of PTRACE_SYSEMU/_SINGLESTEP
2018-10-31 15:46:16 -07:00
Linus Torvalds
adb6b2b2b5 c6x changes for 4.20
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJb2glLAAoJEOiN4VijXeFPjfUQAJcSJ/NeoGGpj9T8/+InkEZ9
 dFkB91lyylooew15b9s7Jvrm1kLDzQ6wZif3BzLuBqE4mkh58MawAuOVCYolzTlN
 dkaA5Jqz/CA0ycvQAnfKQKdzJlBDhRanUg1MmB2O018q4afGJKbMlhRicqKtVdv1
 T5GVzwFLkklaAbmPgWOsTujvyK1aAlXUljwO31oKaFZT5Cjl2eM51NfmMiXzQ63o
 lqutmpMspCd9V+jac0aLlYonjFKVIoMHI687RUReIWlbsIySA2GMG/W7xLmnIxJe
 Ny2labiL/epmBlK3IgM0q/eW7RrZN5gX5o6TVpsVL2PJePEOQkMMVz6MAZAt4u9k
 MVcdeuWCqOawMtoyKLUsC/N5ve/rRMildf/XUOL5uu171IEjp3WWCrHR1n1j5aH4
 ouPiXjedB+k9muzi5lQGNERthvPqTshnPohu5xyZt2FcvcA15gbNBFKbzYTlaMVI
 YJANFfLBVaH2QnY1ZSXgp5k1zzlpueil7WB0sqQlbcr372KPJKyscGjXV+4Qa6iJ
 uUjXY8XTuNHeFC5/RKwY3CFWfbE4ebxtvRaUgniVvxYk/OiTjswRhTletMPXxG8+
 QE4+ZNKC8NQfaaxba3yYTPd5Nk7+1WypZC3lbuJcObBQFrDFWpRF58ZGrB53+ssG
 3mB+TupWvjV2KjasXozC
 =8GvY
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming

Pull c6x update from Mark Salter.

* tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming:
  c6x: switch to NO_BOOTMEM
2018-10-31 15:39:25 -07:00
Andrey Ignatov
3615353218 libbpf: Fix compile error in libbpf_attach_type_by_name
Arnaldo Carvalho de Melo reported build error in libbpf when clang
version 3.8.1-24 (tags/RELEASE_381/final) is used:

libbpf.c:2201:36: error: comparison of constant -22 with expression of
type 'const enum bpf_attach_type' is always false
[-Werror,-Wtautological-constant-out-of-range-compare]
                if (section_names[i].attach_type == -EINVAL)
                    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^  ~~~~~~~
1 error generated.

Fix the error by keeping "is_attachable" property of a program in a
separate struct field instead of trying to use attach_type itself.

Fixes: 956b620fcf ("libbpf: Introduce libbpf_attach_type_by_name")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-31 23:06:17 +01:00
Li Zhijian
deee2cae27 kselftests/bpf: use ping6 as the default ipv6 ping binary if it exists
ping binary on some distros doesn't support "ping -6" anymore.

Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-31 23:05:30 +01:00
Linus Torvalds
9b5cf826ef fuse update for 4.20
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCW9m8rQAKCRDh3BK/laaZ
 POTeAP9DthScqnVxrRiyvORwffjTLOCijY4yAatgxTU5MO6TQgD/eeO62Exq5Cij
 4uXCSNIzPVPKiimunVKYoDM8KmcNtAQ=
 =z92F
 -----END PGP SIGNATURE-----

Merge tag 'fuse-update-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse

Pull fuse updates from Miklos Szeredi:
 "As well as the usual bug fixes, this adds the following new features:

   - cached readdir and readlink

   - max I/O size increased from 128k to 1M

   - improved performance and scalability of request queues

   - copy_file_range support

  The only non-fuse bits are trivial cleanups of macros in
  <linux/bitops.h>"

* tag 'fuse-update-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (31 commits)
  fuse: enable caching of symlinks
  fuse: only invalidate atime in direct read
  fuse: don't need GETATTR after every READ
  fuse: allow fine grained attr cache invaldation
  bitops: protect variables in bit_clear_unless() macro
  bitops: protect variables in set_mask_bits() macro
  fuse: realloc page array
  fuse: add max_pages to init_out
  fuse: allocate page array more efficiently
  fuse: reduce size of struct fuse_inode
  fuse: use iversion for readdir cache verification
  fuse: use mtime for readdir cache verification
  fuse: add readdir cache version
  fuse: allow using readdir cache
  fuse: allow caching readdir
  fuse: extract fuse_emit() helper
  fuse: add FOPEN_CACHE_DIR
  fuse: split out readdir.c
  fuse: Use hash table to link processing request
  fuse: kill req->intr_unique
  ...
2018-10-31 14:50:02 -07:00
Linus Torvalds
31990f0f53 The highlights are:
- a series that fixes some old memory allocation issues in libceph
   (myself).  We no longer allocate memory in places where allocation
   failures cannot be handled and BUG when the allocation fails.
 
 - support for copy_file_range() syscall (Luis Henriques).  If size and
   alignment conditions are met, it leverages RADOS copy-from operation.
   Otherwise, a local copy is performed.
 
 - a patch that reduces memory requirement of ceph_sync_read() from the
   size of the entire read to the size of one object (Zheng Yan).
 
 - fallocate() syscall is now restricted to FALLOC_FL_PUNCH_HOLE (Luis
   Henriques)
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAlvZ6AcTHGlkcnlvbW92
 QGdtYWlsLmNvbQAKCRBKf944AhHzi8H+B/9V/QB1BX5Q2DvkS3mcLNI2NphrppaD
 VBuviwoIzaBm1paCrx40J/pCtsK1Fybl5dBAh1W0SDxEGR8JUA8GJw+oemtOS6pZ
 DwjOF9S7uhzf5M3nQ9SvAbIudBISMZQRi22Y8fWs3k+yaECIz1J/pe7RiKo/GBAB
 NnlbrZ1AYSB02chchVCSmWTApeIRp9JXnaM9xLMJWGVLL/vONjt3ltJ/w9haGYz8
 FPFLPFeWobWqFElnOUomxU8Cv84DgPtH8si0UAn16jveractpFJWO4X6LDs/ZYDk
 /MccfsB3EK9BCJdLJMoI0/lXxE33z3/MehmJDs9xGSX/N4N7UTF8Ve1b
 =U91e
 -----END PGP SIGNATURE-----

Merge tag 'ceph-for-4.20-rc1' of git://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
 "The highlights are:

   - a series that fixes some old memory allocation issues in libceph
     (myself). We no longer allocate memory in places where allocation
     failures cannot be handled and BUG when the allocation fails.

   - support for copy_file_range() syscall (Luis Henriques). If size and
     alignment conditions are met, it leverages RADOS copy-from
     operation. Otherwise, a local copy is performed.

   - a patch that reduces memory requirement of ceph_sync_read() from
     the size of the entire read to the size of one object (Zheng Yan).

   - fallocate() syscall is now restricted to FALLOC_FL_PUNCH_HOLE (Luis
     Henriques)"

* tag 'ceph-for-4.20-rc1' of git://github.com/ceph/ceph-client: (25 commits)
  ceph: new mount option to disable usage of copy-from op
  ceph: support copy_file_range file operation
  libceph: support the RADOS copy-from operation
  ceph: add non-blocking parameter to ceph_try_get_caps()
  libceph: check reply num_data_items in setup_request_data()
  libceph: preallocate message data items
  libceph, rbd, ceph: move ceph_osdc_alloc_messages() calls
  libceph: introduce alloc_watch_request()
  libceph: assign cookies in linger_submit()
  libceph: enable fallback to ceph_msg_new() in ceph_msgpool_get()
  ceph: num_ops is off by one in ceph_aio_retry_work()
  libceph: no need to call osd_req_opcode_valid() in osd_req_encode_op()
  ceph: set timeout conditionally in __cap_delay_requeue
  libceph: don't consume a ref on pagelist in ceph_msg_data_add_pagelist()
  libceph: introduce ceph_pagelist_alloc()
  libceph: osd_req_op_cls_init() doesn't need to take opcode
  libceph: bump CEPH_MSG_MAX_DATA_LEN
  ceph: only allow punch hole mode in fallocate
  ceph: refactor ceph_sync_read()
  ceph: check if LOOKUPNAME request was aborted when filling trace
  ...
2018-10-31 14:42:31 -07:00
David S. Miller
e2acdddde0 Merge branch 'mlxsw-Enable-minimum-shaper-on-MC-TCs'
Ido Schimmel says:

====================
mlxsw: Enable minimum shaper on MC TCs

Petr says:

An MC-aware mode was introduced in commit 7b81953066 ("mlxsw:
spectrum: Configure MC-aware mode on mlxsw ports"). In MC-aware mode,
BUM traffic gets a special treatment by being assigned to a separate set
of traffic classes 8..15. Pairs of TCs 0 and 8, 1 and 9, etc., are then
configured to strictly prioritize the lower-numbered ones. The intention
is to prevent BUM traffic from flooding the switch and push out all UC
traffic, which would otherwise happen, and instead give UC traffic
precedence.

However strictly prioritizing UC traffic has the effect that UC overload
pushes out all BUM traffic, such as legitimate ARP queries. These
packets are kept in queues for a while, but under sustained UC overload,
their lifetime eventually expires and these packets are dropped. That is
detrimental to network performance as well.

In this patchset, MC TCs (8..15) are configured with minimum shaper of
200Mbps (a minimum permitted value) to allow a trickle of necessary
control traffic to get through.

First in patch #1, the QEEC register is extended with fields necessary
to configure the minimum shaper.

In patch #2, minimum shaper is enabled on TCs 8..15.

In patches #3 and #4, first the MC-awareness test is tweaked to support
the minimum shaper, and then a new test is introduced to test that MC
traffic behaves well under UC overload.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:56:59 -07:00
Petr Machata
a5ee171d08 selftests: mlxsw: qos_mc_aware: Add a test for UC awareness
In a previous patch, mlxsw was updated to configure a minimum bandwidth
allowance on MC TCs. Test that this indeed fixes the problem of UC
traffic overload pushing out all MC traffic.

Fixes: b5638d46c9 ("selftests: mlxsw: Add a test for UC behavior under MC flood")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:56:59 -07:00
Petr Machata
8f3f09358c selftests: mlxsw: qos_mc_aware: Tweak for min shaper
Since the minimum shaper is now being enabled for MC TCs, it's
unreasonable to expect no UC traffic loss. Minimal min shaper value is
200Mbps, which is 20% of the 1Gbps that this test configures on egress.
To cover for glitches, tolerate up to 25% UC degradation under MC
overload.

Fixes: b5638d46c9 ("selftests: mlxsw: Add a test for UC behavior under MC flood")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:56:59 -07:00
Petr Machata
0fe6402316 mlxsw: spectrum: Set minimum shaper on MC TCs
An MC-aware mode was introduced in commit 7b81953066 ("mlxsw:
spectrum: Configure MC-aware mode on mlxsw ports"). In MC-aware mode,
BUM traffic gets a special treatment by being assigned to a separate set
of traffic classes 8..15. Pairs of TCs 0 and 8, 1 and 9, etc., are then
configured to strictly prioritize the lower-numbered ones. The intention
is to prevent BUM traffic from flooding the switch and push out all UC
traffic, which would otherwise happen, and instead give UC traffic
precedence.

However strictly prioritizing UC traffic has the effect that UC overload
pushes out all BUM traffic, such as legitimate ARP queries. These
packets are kept in queues for a while, but under sustained UC overload,
their lifetime eventually expires and these packets are dropped. That is
detrimental to network performance as well.

Therefore configure the MC TCs (8..15) with minimum shaper of 200Mbps (a
minimum permitted value) to allow a trickle of necessary control traffic
to get through.

Fixes: 7b81953066 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:56:58 -07:00
Petr Machata
8b931821aa mlxsw: reg: QEEC: Add minimum shaper fields
Add QEEC.mise (minimum shaper enable) and QEEC.min_shaper_rate to enable
configuration of minimum shaper.

Increase the QEEC length to 0x20 as well: that's the length that the
register has had for a long time now, but with the configurations that
mlxsw typically exercises, the firmware tolerated 0x1C-sized packets.
With mise=true however, FW rejects packets unless they have the full
required length.

Fixes: b9b7cee405 ("mlxsw: reg: Add QoS ETS Element Configuration register")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:56:58 -07:00
David S. Miller
c4d63c7147 Merge branch 'hns3-fixes'
Huazhong Tan says:

====================
Bugfix for the HNS3 driver

This patch series include bugfix for the HNS3 ethernet
controller driver.

Change log:
V4->V5:
	Fixes comments from Joe Perches & Sergei Shtylyov
V3->V4:
	Fixes comments from Sergei Shtylyov
V2->V3:
	Fixes comments from Sergei Shtylyov
V1->V2:
	Fixes the compilation break reported by kbuild test robot
	http://patchwork.ozlabs.org/patch/989818/
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:42:39 -07:00
Huazhong Tan
29118ab962 net: hns3: bugfix for rtnl_lock's range in the hclgevf_reset()
Since hclgevf_reset_wait() is used to wait for the hardware to complete
the reset, it is not necessary to hold the rtnl_lock during
hclgevf_reset_wait(). So this patch releases the lock for the duration
of hclgevf_reset_wait().

Fixes: 6988eb2a9b ("net: hns3: Add support to reset the enet/ring mgmt layer")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:42:38 -07:00
Huazhong Tan
a963052e53 net: hns3: bugfix for rtnl_lock's range in the hclge_reset()
Since hclge_reset_wait() is used to wait for the hardware to complete
the reset, it is not necessary to hold the rtnl_lock during
hclge_reset_wait(). So this patch releases the lock for the duration
of hclge_reset_wait().

Fixes: 6d4fab3953 ("net: hns3: Reset net device with rtnl_lock")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:42:38 -07:00
Huazhong Tan
3c88ed1d79 net: hns3: bugfix for handling mailbox while the command queue reinitialized
In a multi-core machine, the mailbox service and reset service
will be executed at the same time. The reset service will re-initialize
the command queue, before that, the mailbox handler can only get some
invalid messages.

The HCLGE_STATE_CMD_DISABLE flag means that the command queue is not
available and needs to be reinitialized. Therefore, when the mailbox
handler recognizes this flag, it should not process the command.

Fixes: dde1a86e93 ("net: hns3: Add mailbox support to PF driver")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:42:38 -07:00
Huazhong Tan
7fa6be4fd2 net: hns3: fix incorrect return value/type of some functions
There are some functions that, when they fail to send the command,
need to return the corresponding error value to its caller.

Fixes: 46a3df9f97 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Fixes: 681ec3999b ("net: hns3: fix for vlan table lost problem when resetting")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:42:38 -07:00
Huazhong Tan
1c12493809 net: hns3: bugfix for hclge_mdio_write and hclge_mdio_read
When there is a PHY, the driver needs to complete some operations through
MDIO during reset reinitialization, so HCLGE_STATE_CMD_DISABLE is more
suitable than HCLGE_STATE_RST_HANDLING to prevent the MDIO operation from
being sent during the hardware reset.

Fixes: b50ae26c57 ("net: hns3: never send command queue message to IMP when reset)
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:42:38 -07:00
Huazhong Tan
6d71ec6cbf net: hns3: bugfix for is_valid_csq_clean_head()
The HEAD pointer of the hardware command queue maybe equal to the command
queue's next_to_use in the driver, so that does not belong to the invalid
HEAD pointer, since the hardware may not process the command in time,
causing the HEAD pointer to be too late to update. The variables' name
in this function is unreadable, so give them a more readable one.

Fixes: 3ff504908f ("net: hns3: fix a dead loop in hclge_cmd_csq_clean")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:42:38 -07:00
Huazhong Tan
5faaf0752a net: hns3: remove unnecessary queue reset in the hns3_uninit_all_ring()
It is not necessary to reset the queue in the hns3_uninit_all_ring(),
since the queue is stopped in the down operation, and will be reset
in the up operation. And the judgment of the HCLGE_STATE_RST_HANDLING
flag in the hclge_reset_tqp() is not correct, because we need to reset
tqp during pf reset, otherwise it may cause queue not being reset to
working state problem.

Fixes: 76ad4f0ee7 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:42:38 -07:00
Huazhong Tan
b2f74dbaf1 net: hns3: bugfix for the initialization of command queue's spin lock
The spin lock of the command queue only need to be initialized once
when the driver initializes the command queue. It is not necessary to
initialize the spin lock when resetting. At the same time, the
modification of the queue member should be performed after acquiring
the lock.

Fixes: 3efb960f05 ("net: hns3: Refactor the initialization of command queue")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:42:38 -07:00
Huazhong Tan
0d4411408a net: hns3: bugfix for reporting unknown vector0 interrupt repeatly problem
The current driver supports handling two vector0 interrupts, reset and
mailbox. When the hardware reports an interrupt of another type of
interrupt source, if the driver does not process the interrupt, but
enables the interrupt, the hardware will repeatedly report the unknown
interrupt.

Therefore, the driver enables the vector0 interrupt after clearing the
known type of interrupt source. Other conditions are not enabled.

Fixes: cd8c5c269b ("net: hns3: Fix for hclge_reset running repeatly problem")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:42:38 -07:00
Huazhong Tan
73b907a083 net: hns3: bugfix for buffer not free problem during resetting
When hns3_get_ring_config()/hns3_queue_to_ring()/
hns3_get_vector_ring_chain() failed during resetting, the allocated
memory has not been freed before these three functions return. So
this patch adds error handler in these functions to fix it.

Fixes: 76ad4f0ee7 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:42:38 -07:00