kmap() is being deprecated in favor of kmap_local_page().
Two main problems with kmap(): (1) It comes with an overhead as mapping
space is restricted and protected by a global lock for synchronization and
(2) it also requires global TLB invalidation when the kmap's pool wraps
and it might block when the mapping space is fully utilized until a slot
becomes available.
With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore,
the tasks can be preempted and, when they are scheduled to run again, the
kernel virtual addresses are restored and still valid.
Since its use in btree.c is safe everywhere, it should be preferred.
Therefore, replace kmap() with kmap_local_page() in btree.c. Where
possible, use the suited standard helpers (memzero_page(), memcpy_page())
instead of open coding kmap_local_page() plus memset() or memcpy().
Tested in a QEMU/KVM x86_32 VM, 6GB RAM, booting a kernel with
HIGHMEM64GB enabled.
Link: https://lkml.kernel.org/r/20220821180400.8198-4-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Cc: Christian Brauner (Microsoft) <brauner@kernel.org>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kmap() is being deprecated in favor of kmap_local_page().
Two main problems with kmap(): (1) It comes with an overhead as mapping
space is restricted and protected by a global lock for synchronization and
(2) it also requires global TLB invalidation when the kmap's pool wraps
and it might block when the mapping space is fully utilized until a slot
becomes available.
With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore,
the tasks can be preempted and, when they are scheduled to run again, the
kernel virtual addresses are restored and still valid.
Since its use in bnode.c is safe everywhere, it should be preferred.
Therefore, replace kmap() with kmap_local_page() in bnode.c. Where
possible, use the suited standard helpers (memzero_page(), memcpy_page())
instead of open coding kmap_local_page() plus memset() or memcpy().
Tested in a QEMU/KVM x86_32 VM, 6GB RAM, booting a kernel with
HIGHMEM64GB enabled.
Link: https://lkml.kernel.org/r/20220821180400.8198-3-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Cc: Christian Brauner (Microsoft) <brauner@kernel.org>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "hfs: Replace kmap() with kmap_local_page()".
kmap() is being deprecated in favor of kmap_local_page().
There are two main problems with kmap(): (1) It comes with an overhead as
mapping space is restricted and protected by a global lock for
synchronization and (2) it also requires global TLB invalidation when the
kmaps pool wraps and it might block when the mapping space is fully
utilized until a slot becomes available.
With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore,
the tasks can be preempted and, when they are scheduled to run again, the
kernel virtual addresses are restored and still valid.
Since its use in fs/hfs is safe everywhere, it should be preferred.
Therefore, replace kmap() with kmap_local_page() in fs/hfs. Where
possible, use the suited standard helpers (memzero_page(), memcpy_page())
instead of open coding kmap_local_page() plus memset() or memcpy().
Fix a bug due to a page being not unmapped if the code jumps to the
"fail_page" label (1/3).
Tested in a QEMU/KVM x86_32 VM, 6GB RAM, booting a kernel with
HIGHMEM64GB enabled.
This patch (of 3):
Several paths within hfs_btree_open() jump to the "fail_page" label where
put_page() is called while the page is still mapped.
Call kunmap() to unmap the page soon before put_page().
Link: https://lkml.kernel.org/r/20220821180400.8198-1-fmdefrancesco@gmail.com
Link: https://lkml.kernel.org/r/20220821180400.8198-2-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Cc: Christian Brauner (Microsoft) <brauner@kernel.org>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: Matthew Wilcox <willy@infradead.org>]
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kmap() is being deprecated in favor of kmap_local_page().
There are two main problems with kmap(): (1) It comes with an overhead as
mapping space is restricted and protected by a global lock for
synchronization and (2) it also requires global TLB invalidation when the
kmap's pool wraps and it might block when the mapping space is fully
utilized until a slot becomes available.
With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore,
the tasks can be preempted and, when they are scheduled to run again, the
kernel virtual addresses are restored and are still valid.
Since its use in kexec_core.c is safe everywhere, it should be preferred.
Therefore, replace kmap() with kmap_local_page() in kexec_core.c.
Tested on a QEMU/KVM x86_32 VM, 6GB RAM, booting a kernel with
HIGHMEM64GB enabled.
Link: https://lkml.kernel.org/r/20220821182519.9483-1-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use atomic_try_cmpxchg instead of atomic_cmpxchg (*ptr, old, new) == old
in __get_reqs_available. x86 CMPXCHG instruction returns success in ZF
flag, so this change saves a compare after cmpxchg (and related move
instruction in front of cmpxchg).
Also, atomic_try_cmpxchg implicitly assigns old *ptr value to "old" when
cmpxchg fails, enabling further code simplifications.
No functional change intended.
Link: https://lkml.kernel.org/r/20220714164851.3055-1-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use try_cmpxchg instead of cmpxchg (*ptr, old, new) == old in
discard_buffer. x86 CMPXCHG instruction returns success in ZF flag, so
this change saves a compare after cmpxchg (and related move instruction in
front of cmpxchg).
Also, try_cmpxchg implicitly assigns old *ptr value to "old" when cmpxchg
fails, enabling further code simplifications.
Note that the value from *ptr should be read using READ_ONCE to prevent
the compiler from merging, refetching or reordering the read.
No functional change intended.
Link: https://lkml.kernel.org/r/20220714171653.12128-1-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use try_cmpxchg instead of cmpxchg (*ptr, old, new) == old in
list_add_tail_lockless. x86 CMPXCHG instruction returns success in ZF
flag, so this change saves a compare after cmpxchg (and related move
instruction in front of cmpxchg).
No functional change intended.
Link: https://lkml.kernel.org/r/20220714173255.12987-1-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
clock_gettime(CLOCK_MONOTONIC, &tp) is very precise on ia64 as it uses ITC
(similar to rdtsc on x86). It's not quite a hrtimer as it is a few times
slower than 1ns. Usually 2-3ns.
clock_getres(CLOCK_MONOTONIC, &res) never reflected that fact and reported
0.04s precision (1/HZ value).
In https://bugs.gentoo.org/596382 gstreamer's test suite failed loudly
when it noticed precision discrepancy.
Before the change:
clock_getres(CLOCK_MONOTONIC, &res) reported 250Hz precision.
After the change:
clock_getres(CLOCK_MONOTONIC, &res) reports ITC (400Mhz) precision.
The patch is based on matoro's fix. I added a bit of explanation why we
need to special-case arch-specific clock_getres().
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/20220820181813.2275195-1-slyich@gmail.com
Signed-off-by: Sergei Trofimovich <slyich@gmail.com>
Cc: matoro <matoro_mailinglist_kernel@matoro.tk>
Cc: Émeric Maschino <emeric.maschino@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
brelse() tests whether its argument is NULL and then returns immediately.
Thus remove the tests which are not needed around the shown calls.
Link: https://lkml.kernel.org/r/20220819081819.96347-1-chi.minghao@zte.com.cn
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Cc: CGEL ZTE <cgel.zte@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minghao Chi <chi.minghao@zte.com.cn>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Do one fork in vsyscall detection code and let SIGSEGV handler exit and
carry information to the parent saving LOC.
[adobriyan@gmail.com: redo original patch, delete unnecessary variables, minimise code changes]
Link: https://lkml.kernel.org/r/YvoWzAn5dlhF75xa@localhost.localdomain
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Tested-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use try_cmpxchg instead of cmpxchg (*ptr, old, new) == old in
llist_add_batch and llist_del_first. x86 CMPXCHG instruction returns
success in ZF flag, so this change saves a compare after cmpxchg.
Also, try_cmpxchg implicitly assigns old *ptr value to "old" when cmpxchg
fails, enabling further code simplifications.
No functional change intended.
Link: https://lkml.kernel.org/r/20220712144917.4497-1-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Attempting to get a crash dump out of a debug PREEMPT_RT kernel via an NMI
panic() doesn't work. The cause of that lies in the PREEMPT_RT definition
of mutex_trylock():
if (IS_ENABLED(CONFIG_DEBUG_RT_MUTEXES) && WARN_ON_ONCE(!in_task()))
return 0;
This prevents an nmi_panic() from executing the main body of
__crash_kexec() which does the actual kexec into the kdump kernel. The
warning and return are explained by:
6ce47fd961 ("rtmutex: Warn if trylock is called from hard/softirq context")
[...]
The reasons for this are:
1) There is a potential deadlock in the slowpath
2) Another cpu which blocks on the rtmutex will boost the task
which allegedly locked the rtmutex, but that cannot work
because the hard/softirq context borrows the task context.
Furthermore, grabbing the lock isn't NMI safe, so do away with kexec_mutex
and replace it with an atomic variable. This is somewhat overzealous as
*some* callsites could keep using a mutex (e.g. the sysfs-facing ones
like crash_shrink_memory()), but this has the benefit of involving a
single unified lock and preventing any future NMI-related surprises.
Tested by triggering NMI panics via:
$ echo 1 > /proc/sys/kernel/panic_on_unrecovered_nmi
$ echo 1 > /proc/sys/kernel/unknown_nmi_panic
$ echo 1 > /proc/sys/kernel/panic
$ ipmitool power diag
Link: https://lkml.kernel.org/r/20220630223258.4144112-3-vschneid@redhat.com
Fixes: 6ce47fd961 ("rtmutex: Warn if trylock is called from hard/softirq context")
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "kexec, panic: Making crash_kexec() NMI safe", v4.
This patch (of 2):
Most acquistions of kexec_mutex are done via mutex_trylock() - those were
a direct "translation" from:
8c5a1cf0ad ("kexec: use a mutex for locking rather than xchg()")
there have however been two additions since then that use mutex_lock():
crash_get_memory_size() and crash_shrink_memory().
A later commit will replace said mutex with an atomic variable, and
locking operations will become atomic_cmpxchg(). Rather than having those
mutex_lock() become while (atomic_cmpxchg(&lock, 0, 1)), turn them into
trylocks that can return -EBUSY on acquisition failure.
This does halve the printable size of the crash kernel, but that's still
neighbouring 2G for 32bit kernels which should be ample enough.
Link: https://lkml.kernel.org/r/20220630223258.4144112-1-vschneid@redhat.com
Link: https://lkml.kernel.org/r/20220630223258.4144112-2-vschneid@redhat.com
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kmap() and kmap_atomic() are being deprecated in favor of
kmap_local_page().
There are two main problems with kmap(): (1) It comes with an overhead as
mapping space is restricted and protected by a global lock for
synchronization and (2) it also requires global TLB invalidation when the
kmap's pool wraps and it might block when the mapping space is fully
utilized until a slot becomes available.
kmap_local_page() is safe from any context and is therefore redundant with
kmap_atomic() with the exception of any pagefault or preemption disable
requirements. However, using kmap_atomic() for these side effects makes
the code less clear. So any requirement for pagefault or preemption
disable should be made explicitly.
With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore,
the tasks can be preempted and, when they are scheduled to run again, the
kernel virtual addresses are restored.
Link: https://lkml.kernel.org/r/20220813220034.806698-1-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The use of kmap() is being deprecated in favor of kmap_local_page().
There are two main problems with kmap(): (1) It comes with an overhead as
mapping space is restricted and protected by a global lock for
synchronization and (2) it also requires global TLB invalidation when the
kmap's pool wraps and it might block when the mapping space is fully
utilized until a slot becomes available.
With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
Tasks can be preempted and, when scheduled to run again, the kernel
virtual addresses are restored and still valid. It is faster than kmap()
in kernels with HIGHMEM enabled.
Since kmap_local_page() can be safely used in compress.c, it should be
called everywhere instead of kmap().
Therefore, replace kmap() with kmap_local_page() in compress.c. Where it
is needed, use memzero_page() instead of open coding kmap_local_page()
plus memset() to fill the pages with zeros. Delete the redundant
flush_dcache_page() in the two call sites of memzero_page().
Tested with mkisofs on a QEMU/KVM x86_32 VM, 6GB RAM, booting a kernel
with HIGHMEM64GB enabled.
Link: https://lkml.kernel.org/r/20220801122709.8164-1-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Pali Rohár <pali@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
CONFIG_DEBUG_INFO is now implicitly selected if one picks one of the
explicit options that could be DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT,
DEBUG_INFO_DWARF4, DEBUG_INFO_DWARF5.
This was actually not what I had in mind when I suggested making it a
'choice' statement, but it's too late to change again now, and the Kconfig
logic is more sensible in the new form.
Change any defconfig file that had CONFIG_DEBUG_INFO enabled but did not
pick DWARF4 or DWARF5 explicitly to now pick the toolchain default.
Link: https://lkml.kernel.org/r/20220811114609.2097335-1-arnd@kernel.org
Fixes: f9b3cd2457 ("Kconfig.debug: make DEBUG_INFO selectable from a choice")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Cc: Rich Felker <dalias@libc.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
sysvipc_find_ipc() can be simplified further:
- It uses a for() loop to locate the next entry in the idr.
This can be replaced with idr_get_next().
- It receives two parameters (pos - which is actually
an idr index and not a position, and new_pos, which
is really a position).
One parameter is sufficient.
Link: https://lore.kernel.org/all/20210903052020.3265-3-manfred@colorfullife.com/
Link: https://lkml.kernel.org/r/20220805115733.104763-1-manfred@colorfullife.com
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Waiman Long <longman@redhat.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: <1vier1@web.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are cases where the IP pointer in a Code: line in an oops doesn't
point at the beginning of an instruction:
Code: 0f bd c2 e9 a0 cd b5 e4 48 0f bd c2 e9 97 cd b5 e4 0f 1f 80 00 00 00 00 \
e9 8b cd b5 e4 0f 1f 00 66 0f a3 d0 e9 7f cd b5 e4 0f 1f <80> 00 00 00 \
00 0f a3 d0 e9 70 cd b5 e4 48 0f a3 d0 e9 67 cd b5
e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8
0f 1f 80 00 00 00 00 nopl 0x0(%rax)
^^
and the current way of determining the faulting instruction line doesn't
work because disassembled instructions are counted from the IP byte to
the end and when that thing points in the middle, the trailing bytes can
be interpreted as different insns:
Code starting with the faulting instruction
===========================================
0: 80 00 00 addb $0x0,(%rax)
3: 00 00 add %al,(%rax)
whereas, this is part of
0f 1f 80 00 00 00 00 nopl 0x0(%rax)
5: 0f a3 d0 bt %edx,%eax
...
leading to:
1d: 0f 1f 00 nopl (%rax)
20: 66 0f a3 d0 bt %dx,%ax
24:* e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 <-- trapping instruction
29: 0f 1f 80 00 00 00 00 nopl 0x0(%rax)
30: 0f a3 d0 bt %edx,%eax
which is the wrong faulting instruction.
Change the way the faulting line number is determined by matching the
opcode bytes from the beginning, leading to correct output:
1d: 0f 1f 00 nopl (%rax)
20: 66 0f a3 d0 bt %dx,%ax
24: e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8
29:* 0f 1f 80 00 00 00 00 nopl 0x0(%rax) <-- trapping instruction
30: 0f a3 d0 bt %edx,%eax
While at it, make decodecode use bash as the interpreter - that thing
should be present on everything by now. It simplifies the code a lot
too.
Link: https://lkml.kernel.org/r/20220808085928.29840-1-bp@alien8.de
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kmap() is being deprecated in favor of kmap_local_page().
There are two main problems with kmap(): (1) It comes with an overhead as
mapping space is restricted and protected by a global lock for
synchronization and (2) it also requires global TLB invalidation when the
kmap's pool wraps and it might block when the mapping space is fully
utilized until a slot becomes available.
With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore,
the tasks can be preempted and, when they are scheduled to run again, the
kernel virtual addresses are restored and are still valid.
Since its use in btree.c is safe everywhere, it should be preferred.
Therefore, replace kmap() with kmap_local_page() in btree.c.
Tested in a QEMU/KVM x86_32 VM, 6GB RAM, booting a kernel with
HIGHMEM64GB enabled.
Link: https://lkml.kernel.org/r/20220809203105.26183-5-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kmap() is being deprecated in favor of kmap_local_page().
There are two main problems with kmap(): (1) It comes with an overhead as
mapping space is restricted and protected by a global lock for
synchronization and (2) it also requires global TLB invalidation when the
kmap's pool wraps and it might block when the mapping space is fully
utilized until a slot becomes available.
With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore,
the tasks can be preempted and, when they are scheduled to run again, the
kernel virtual addresses are restored and are still valid.
Since its use in bitmap.c is safe everywhere, it should be preferred.
Therefore, replace kmap() with kmap_local_page() in bitmap.c.
Tested in a QEMU/KVM x86_32 VM, 6GB RAM, booting a kernel with
HIGHMEM64GB enabled.
Link: https://lkml.kernel.org/r/20220809203105.26183-4-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kmap() is being deprecated in favor of kmap_local_page().
Two main problems with kmap(): (1) It comes with an overhead as mapping
space is restricted and protected by a global lock for synchronization and
(2) it also requires global TLB invalidation when the kmap's pool wraps
and it might block when the mapping space is fully utilized until a slot
becomes available.
With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore,
the tasks can be preempted and, when they are scheduled to run again, the
kernel virtual addresses are restored and still valid.
Since its use in bnode.c is safe everywhere, it should be preferred.
Therefore, replace kmap() with kmap_local_page() in bnode.c. Where
possible, use the suited standard helpers (memzero_page(), memcpy_page())
instead of open coding kmap_local_page() plus memset() or memcpy().
Tested in a QEMU/KVM x86_32 VM, 6GB RAM, booting a kernel with
HIGHMEM64GB enabled.
Link: https://lkml.kernel.org/r/20220809203105.26183-3-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "hfsplus: Replace kmap() with kmap_local_page()".
kmap() is being deprecated in favor of kmap_local_page().
There are two main problems with kmap(): (1) It comes with an overhead as
mapping space is restricted and protected by a global lock for
synchronization and (2) it also requires global TLB invalidation when the
kmap’s pool wraps and it might block when the mapping space is fully
utilized until a slot becomes available.
With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore,
the tasks can be preempted and, when they are scheduled to run again, the
kernel virtual addresses are restored and still valid.
Since its use in fs/hfsplus is safe everywhere, it should be preferred.
Therefore, replace kmap() with kmap_local_page() in fs/hfsplus. Where
possible, use the suited standard helpers (memzero_page(), memcpy_page())
instead of open coding kmap_local_page() plus memset() or memcpy().
Fix a bug due to a page being not unmapped if the code jumps to the
"fail_page" label (1/4).
Tested in a QEMU/KVM x86_32 VM, 6GB RAM, booting a kernel with
HIGHMEM64GB enabled.
This patch (of 4):
Several paths within hfs_btree_open() jump to the "fail_page" label where
put_page() is called while the page is still mapped.
Call kunmap() to unmap the page soon before put_page().
Link: https://lkml.kernel.org/r/20220809203105.26183-1-fmdefrancesco@gmail.com
Link: https://lkml.kernel.org/r/20220809203105.26183-2-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
cc:stable, addressing pre-6.0 issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYwvgrAAKCRDdBJ7gKXxA
jlweAQC9dzE08Elxl4F7Uvxe+62JWVeflBRrT7sJ6jU1Gu3QcQEAhhI1Xit3/MGq
pRytDBObGADxlA67c9eNq6J5pCT/7gE=
=pD67
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more hotfixes from Andrew Morton:
"Seventeen hotfixes. Mostly memory management things.
Ten patches are cc:stable, addressing pre-6.0 issues"
* tag 'mm-hotfixes-stable-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
.mailmap: update Luca Ceresoli's e-mail address
mm/mprotect: only reference swap pfn page if type match
squashfs: don't call kmalloc in decompressors
mm/damon/dbgfs: avoid duplicate context directory creation
mailmap: update email address for Colin King
asm-generic: sections: refactor memory_intersects
bootmem: remove the vmemmap pages from kmemleak in put_page_bootmem
ocfs2: fix freeing uninitialized resource on ocfs2_dlm_shutdown
Revert "memcg: cleanup racy sum avoidance code"
mm/zsmalloc: do not attempt to free IS_ERR handle
binder_alloc: add missing mmap_lock calls when using the VMA
mm: re-allow pinning of zero pfns (again)
vmcoreinfo: add kallsyms_num_syms symbol
mailmap: update Guilherme G. Piccoli's email addresses
writeback: avoid use-after-free after removing device
shmem: update folio if shmem_replace_page() updates the page
mm/hugetlb: avoid corrupting page->mapping in hugetlb_mcopy_atomic_pte
Hi Linus,
Please pull (hopefully) the last portion of fixes from Sander for his
UP rework series. The original series came from -mm tree, and it was
not the latest version, that's why we need follow-ups. It fixes only
a test introduced by that series. The test fails under certain configs.
From Sander:
This series fixes the reported issues, and implements the suggested
improvements, for the version of the cpumask tests [1] that was merged
with commit c41e8866c2 ("lib/test: introduce cpumask KUnit test
suite").
These changes include fixes for the tests, and better alignment with the
KUnit style guidelines.
Thanks,
Yury
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEEi8GdvG6xMhdgpu/4sUSA/TofvsgFAmMKYcoACgkQsUSA/Tof
vsiceAv/TY+HTn1gmrNQwi7xC6VUD7mFYlVNZMtyMpZ23UYildz5SjFfuQV3UbXI
H5yKgSao9VFsbwyDUXbhySgOaNR8auq17Ey3jSJuR2A76qO2u2d79Gdt4IjIkq5N
IGOPv/pNOur7J+KSbiVhXasFeZGJ6Xi+xAobp5CK1uPCUI3oU1pAcm1iKkI+eWZ3
tPsM3aWcYGCDec7tqtqcsiWO2x9imPnrpI+C91Pwwr+N40ObkMc4IPzuPrQRn2T2
ECY9pgIWKOwOJ41jzgCVwZIHmuOn9dEgmaEGvE9Ah57OwuDlS43M4Ok3xy2+xS3t
3naLG3p02sJy7sXabC+xH4VJVPNT9/qauMW27cntPeeI2i/+yZXuQSLlVOllrY7/
LYxI8lVb1j50A90I/WrwXoDV0E68cfjhkiqhkgV33t1EamhSJvTG8GwCnF46WG8o
LzLukvoohA9uIrPAH2YpkZtrvsuT6iQccCY0M+kXv6TuYTgygdE16muVHffDKvsG
EIVdBGu6
=oNmV
-----END PGP SIGNATURE-----
Merge tag 'bitmap-6.0-rc3' of github.com:/norov/linux
Pull bitmap fixes from Yury Norov:
"Fix the reported issues, and implements the suggested improvements,
for the version of the cpumask tests [1] that was merged with commit
c41e8866c2 ("lib/test: introduce cpumask KUnit test suite").
These changes include fixes for the tests, and better alignment with
the KUnit style guidelines"
* tag 'bitmap-6.0-rc3' of github.com:/norov/linux:
lib/cpumask_kunit: add tests file to MAINTAINERS
lib/cpumask_kunit: log mask contents
lib/test_cpumask: follow KUnit style guidelines
lib/test_cpumask: fix cpu_possible_mask last test
lib/test_cpumask: drop cpu_possible_mask full test
My Bootlin address is preferred from now on.
Link: https://lkml.kernel.org/r/20220826130515.3011951-1-luca.ceresoli@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The decompressors may be called while in an atomic section. So move the
kmalloc() out of this path, and into the "page actor" init function.
This fixes a regression introduced by commit
f268eedddf ("squashfs: extend "page actor" to handle missing pages")
Link: https://lkml.kernel.org/r/20220822215430.15933-1-phillip@squashfs.org.uk
Fixes: f268eedddf ("squashfs: extend "page actor" to handle missing pages")
Reported-by: Chris Murphy <lists@colorremedies.com>
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When user tries to create a DAMON context via the DAMON debugfs interface
with a name of an already existing context, the context directory creation
fails but a new context is created and added in the internal data
structure, due to absence of the directory creation success check. As a
result, memory could leak and DAMON cannot be turned on. An example test
case is as below:
# cd /sys/kernel/debug/damon/
# echo "off" > monitor_on
# echo paddr > target_ids
# echo "abc" > mk_context
# echo "abc" > mk_context
# echo $$ > abc/target_ids
# echo "on" > monitor_on <<< fails
Return value of 'debugfs_create_dir()' is expected to be ignored in
general, but this is an exceptional case as DAMON feature is depending
on the debugfs functionality and it has the potential duplicate name
issue. This commit therefore fixes the issue by checking the directory
creation failure and immediately return the error in the case.
Link: https://lkml.kernel.org/r/20220821180853.2400-1-sj@kernel.org
Fixes: 75c1c2b53c ("mm/damon/dbgfs: support multiple contexts")
Signed-off-by: Badari Pulavarty <badari.pulavarty@intel.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [ 5.15.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Colin King is working on kernel janitorial fixes in his spare time and
using his Intel email is confusing. Use his gmail account as the default
email address.
Link: https://lkml.kernel.org/r/20220817212753.101109-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are two problems with the current code of memory_intersects:
First, it doesn't check whether the region (begin, end) falls inside the
region (virt, vend), that is (virt < begin && vend > end).
The second problem is if vend is equal to begin, it will return true but
this is wrong since vend (virt + size) is not the last address of the
memory region but (virt + size -1) is. The wrong determination will
trigger the misreporting when the function check_for_illegal_area calls
memory_intersects to check if the dma region intersects with stext region.
The misreporting is as below (stext is at 0x80100000):
WARNING: CPU: 0 PID: 77 at kernel/dma/debug.c:1073 check_for_illegal_area+0x130/0x168
DMA-API: chipidea-usb2 e0002000.usb: device driver maps memory from kernel text or rodata [addr=800f0000] [len=65536]
Modules linked in:
CPU: 1 PID: 77 Comm: usb-storage Not tainted 5.19.0-yocto-standard #5
Hardware name: Xilinx Zynq Platform
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x58/0x70
dump_stack_lvl from __warn+0xb0/0x198
__warn from warn_slowpath_fmt+0x80/0xb4
warn_slowpath_fmt from check_for_illegal_area+0x130/0x168
check_for_illegal_area from debug_dma_map_sg+0x94/0x368
debug_dma_map_sg from __dma_map_sg_attrs+0x114/0x128
__dma_map_sg_attrs from dma_map_sg_attrs+0x18/0x24
dma_map_sg_attrs from usb_hcd_map_urb_for_dma+0x250/0x3b4
usb_hcd_map_urb_for_dma from usb_hcd_submit_urb+0x194/0x214
usb_hcd_submit_urb from usb_sg_wait+0xa4/0x118
usb_sg_wait from usb_stor_bulk_transfer_sglist+0xa0/0xec
usb_stor_bulk_transfer_sglist from usb_stor_bulk_srb+0x38/0x70
usb_stor_bulk_srb from usb_stor_Bulk_transport+0x150/0x360
usb_stor_Bulk_transport from usb_stor_invoke_transport+0x38/0x440
usb_stor_invoke_transport from usb_stor_control_thread+0x1e0/0x238
usb_stor_control_thread from kthread+0xf8/0x104
kthread from ret_from_fork+0x14/0x2c
Refactor memory_intersects to fix the two problems above.
Before the 1d7db834a0 ("dma-debug: use memory_intersects()
directly"), memory_intersects is called only by printk_late_init:
printk_late_init -> init_section_intersects ->memory_intersects.
There were few places where memory_intersects was called.
When commit 1d7db834a0 ("dma-debug: use memory_intersects()
directly") was merged and CONFIG_DMA_API_DEBUG is enabled, the DMA
subsystem uses it to check for an illegal area and the calltrace above
is triggered.
[akpm@linux-foundation.org: fix nearby comment typo]
Link: https://lkml.kernel.org/r/20220819081145.948016-1-quanyang.wang@windriver.com
Fixes: 9795593625 ("asm/sections: add helpers to check for section data")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thierry Reding <treding@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The vmemmap pages is marked by kmemleak when allocated from memblock.
Remove it from kmemleak when freeing the page. Otherwise, when we reuse
the page, kmemleak may report such an error and then stop working.
kmemleak: Cannot insert 0xffff98fb6eab3d40 into the object search tree (overlaps existing)
kmemleak: Kernel memory leak detector disabled
kmemleak: Object 0xffff98fb6be00000 (size 335544320):
kmemleak: comm "swapper", pid 0, jiffies 4294892296
kmemleak: min_count = 0
kmemleak: count = 0
kmemleak: flags = 0x1
kmemleak: checksum = 0
kmemleak: backtrace:
Link: https://lkml.kernel.org/r/20220819094005.2928241-1-liushixin2@huawei.com
Fixes: f41f2ed43c (mm: hugetlb: free the vmemmap pages associated with each HugeTLB page)
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit 0737e01de9 ("ocfs2: ocfs2_mount_volume does cleanup job
before return error"), any procedure after ocfs2_dlm_init() fails will
trigger crash when calling ocfs2_dlm_shutdown().
ie: On local mount mode, no dlm resource is initialized. If
ocfs2_mount_volume() fails in ocfs2_find_slot(), error handling will call
ocfs2_dlm_shutdown(), then does dlm resource cleanup job, which will
trigger kernel crash.
This solution should bypass uninitialized resources in
ocfs2_dlm_shutdown().
Link: https://lkml.kernel.org/r/20220815085754.20417-1-heming.zhao@suse.com
Fixes: 0737e01de9 ("ocfs2: ocfs2_mount_volume does cleanup job before return error")
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This reverts commit 96e51ccf1a.
Recently we started running the kernel with rstat infrastructure on
production traffic and begin to see negative memcg stats values.
Particularly the 'sock' stat is the one which we observed having negative
value.
$ grep "sock " /mnt/memory/job/memory.stat
sock 253952
total_sock 18446744073708724224
Re-run after couple of seconds
$ grep "sock " /mnt/memory/job/memory.stat
sock 253952
total_sock 53248
For now we are only seeing this issue on large machines (256 CPUs) and
only with 'sock' stat. I think the networking stack increase the stat on
one cpu and decrease it on another cpu much more often. So, this negative
sock is due to rstat flusher flushing the stats on the CPU that has seen
the decrement of sock but missed the CPU that has increments. A typical
race condition.
For easy stable backport, revert is the most simple solution. For long
term solution, I am thinking of two directions. First is just reduce the
race window by optimizing the rstat flusher. Second is if the reader sees
a negative stat value, force flush and restart the stat collection.
Basically retry but limited.
Link: https://lkml.kernel.org/r/20220817172139.3141101-1-shakeelb@google.com
Fixes: 96e51ccf1a ("memcg: cleanup racy sum avoidance code")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Cc: "Michal Koutný" <mkoutny@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: <stable@vger.kernel.org> [5.15]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
zsmalloc() now returns ERR_PTR values as handles, which zram accidentally
can pass to zs_free(). Another bad scenario is when zcomp_compress()
fails - handle has default -ENOMEM value, and zs_free() will try to free
that "pointer value".
Add the missing check and make sure that zs_free() bails out when
ERR_PTR() is passed to it.
Link: https://lkml.kernel.org/r/20220816050906.2583956-1-senozhatsky@chromium.org
Fixes: c7e6f17b52 ("zsmalloc: zs_malloc: return ERR_PTR on failure")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>,
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Take the mmap_read_lock() when using the VMA in binder_alloc_print_pages()
and when checking for a VMA in binder_alloc_new_buf_locked().
It is worth noting binder_alloc_new_buf_locked() drops the VMA read lock
after it verifies a VMA exists, but may be taken again deeper in the call
stack, if necessary.
Link: https://lkml.kernel.org/r/20220810160209.1630707-1-Liam.Howlett@oracle.com
Fixes: a43cfc87ca (android: binder: stop saving a pointer to the VMA)
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Ondrej Mosnacek <omosnace@redhat.com>
Reported-by: <syzbot+a7b60a176ec13cafb793@syzkaller.appspotmail.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Tested-by: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Christian Brauner (Microsoft) <brauner@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Martijn Coenen <maco@android.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Todd Kjos <tkjos@android.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: "Arve Hjønnevåg" <arve@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The below referenced commit makes the same error as 1c56343258 ("mm: fix
is_pinnable_page against a cma page"), re-interpreting the logic to
exclude pinning of the zero page, which breaks device assignment with
vfio.
To avoid further subtle mistakes, split the logic into discrete tests.
[akpm@linux-foundation.org: simplify comment, per John]
Link: https://lkml.kernel.org/r/166015037385.760108.16881097713975517242.stgit@omen
Link: https://lore.kernel.org/all/165490039431.944052.12458624139225785964.stgit@omen
Fixes: f25cbb7a95 ("mm: add zone device coherent type memory support")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Suggested-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Slawomir Laba <slawomirx.laba@intel.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The rest of the kallsyms symbols are useless without knowing the number of
symbols in the table. In an earlier patch, I somehow dropped the
kallsyms_num_syms symbol, so add it back in.
Link: https://lkml.kernel.org/r/20220808205410.18590-1-stephen.s.brennan@oracle.com
Fixes: 5fd8fea935 ("vmcoreinfo: include kallsyms symbols")
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Both @canonical and @ibm email addresses are invalid now; use my personal
address instead.
Link: https://lkml.kernel.org/r/20220804202207.439427-1-gpiccoli@igalia.com
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When a disk is removed, bdi_unregister gets called to stop further
writeback and wait for associated delayed work to complete. However,
wb_inode_writeback_end() may schedule bandwidth estimation dwork after
this has completed, which can result in the timer attempting to access the
just freed bdi_writeback.
Fix this by checking if the bdi_writeback is alive, similar to when
scheduling writeback work.
Since this requires wb->work_lock, and wb_inode_writeback_end() may get
called from interrupt, switch wb->work_lock to an irqsafe lock.
Link: https://lkml.kernel.org/r/20220801155034.3772543-1-khazhy@google.com
Fixes: 45a2966fd6 ("writeback: fix bandwidth estimate for spiky workload")
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Michael Stapelberg <stapelberg+linux@google.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If we allocate a new page, we need to make sure that our folio matches
that new page.
If we do end up in this code path, we store the wrong page in the shmem
inode's page cache, and I would rather imagine that data corruption
ensues.
This will be solved by changing shmem_replace_page() to
shmem_replace_folio(), but this is the minimal fix.
Link: https://lkml.kernel.org/r/20220730042518.1264767-1-willy@infradead.org
Fixes: da08e9b793 ("mm/shmem: convert shmem_swapin_page() to shmem_swapin_folio()")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In MCOPY_ATOMIC_CONTINUE case with a non-shared VMA, pages in the page
cache are installed in the ptes. But hugepage_add_new_anon_rmap is called
for them mistakenly because they're not vm_shared. This will corrupt the
page->mapping used by page cache code.
Link: https://lkml.kernel.org/r/20220712130542.18836-1-linmiaohe@huawei.com
Fixes: f619147104 ("userfaultfd: add UFFDIO_CONTINUE ioctl")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=p8YV
-----END PGP SIGNATURE-----
Merge tag 'for-6.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Fixes:
- check that subvolume is writable when changing xattrs from security
namespace
- fix memory leak in device lookup helper
- update generation of hole file extent item when merging holes
- fix space cache corruption and potential double allocations; this
is a rare bug but can be serious once it happens, stable backports
and analysis tool will be provided
- fix error handling when deleting root references
- fix crash due to assert when attempting to cancel suspended device
replace, add message what to do if mount fails due to missing
replace item
Regressions:
- don't merge pages into bio if their page offset is not contiguous
- don't allow large NOWAIT direct reads, this could lead to short
reads eg. in io_uring"
* tag 'for-6.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: add info when mount fails due to stale replace target
btrfs: replace: drop assert for suspended replace
btrfs: fix silent failure when deleting root reference
btrfs: fix space cache corruption and potential double allocations
btrfs: don't allow large NOWAIT direct reads
btrfs: don't merge pages into bio if their page offset is not contiguous
btrfs: update generation of hole file extent item when merging holes
btrfs: fix possible memory leak in btrfs_get_dev_args_from_path()
btrfs: check if root is readonly while setting security xattr
-----BEGIN PGP SIGNATURE-----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=tss7
-----END PGP SIGNATURE-----
Merge tag '6.0-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cfis fixes from Steve French:
- two locking fixes (zero range, punch hole)
- DFS 9 fix (padding), affecting some servers
- three minor cleanup changes
* tag '6.0-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Add helper function to check smb1+ server
cifs: Use help macro to get the mid header size
cifs: Use help macro to get the header preamble size
cifs: skip extra NULL byte in filenames
smb3: missing inode locks in punch hole
smb3: missing inode locks in zero range
- Fix PAT on Xen, which caused i915 driver failures
- Fix compat INT 80 entry crash on Xen PV guests
- Fix 'MMIO Stale Data' mitigation status reporting on older Intel CPUs
- Fix RSB stuffing regressions
- Fix ORC unwinding on ftrace trampolines
- Add Intel Raptor Lake CPU model number
- Fix (work around) a SEV-SNP bootloader bug providing bogus values in
boot_params->cc_blob_address, by ignoring the value on !SEV-SNP bootups.
- Fix SEV-SNP early boot failure
- Fix the objtool list of noreturn functions and annotate snp_abort(),
which bug confused objtool on gcc-12.
- Fix the documentation for retbleed
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ZpCJ
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix PAT on Xen, which caused i915 driver failures
- Fix compat INT 80 entry crash on Xen PV guests
- Fix 'MMIO Stale Data' mitigation status reporting on older Intel CPUs
- Fix RSB stuffing regressions
- Fix ORC unwinding on ftrace trampolines
- Add Intel Raptor Lake CPU model number
- Fix (work around) a SEV-SNP bootloader bug providing bogus values in
boot_params->cc_blob_address, by ignoring the value on !SEV-SNP
bootups.
- Fix SEV-SNP early boot failure
- Fix the objtool list of noreturn functions and annotate snp_abort(),
which bug confused objtool on gcc-12.
- Fix the documentation for retbleed
* tag 'x86-urgent-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/ABI: Mention retbleed vulnerability info file for sysfs
x86/sev: Mark snp_abort() noreturn
x86/sev: Don't use cc_platform_has() for early SEV-SNP calls
x86/boot: Don't propagate uninitialized boot_params->cc_blob_address
x86/cpu: Add new Raptor Lake CPU model number
x86/unwind/orc: Unwind ftrace trampolines with correct ORC entry
x86/nospec: Fix i386 RSB stuffing
x86/nospec: Unwreck the RSB stuffing
x86/bugs: Add "unknown" reporting for MMIO Stale Data
x86/entry: Fix entry_INT80_compat for Xen PV guests
x86/PAT: Have pat_enabled() properly reflect state when running on Xen
PEBS constraints fix on Alder Lake CPUs and an Intel uncore PMU fix.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=I/UD
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fixes from Ingo Molnar:
"Misc fixes: an Arch-LBR fix, a PEBS enumeration fix, an Intel DS fix,
PEBS constraints fix on Alder Lake CPUs and an Intel uncore PMU fix"
* tag 'perf-urgent-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Fix broken read_counter() for SNB IMC PMU
perf/x86/intel: Fix pebs event constraints for ADL
perf/x86/intel/ds: Fix precise store latency handling
perf/x86/core: Set pebs_capable and PMU_FL_PEBS_ALL for the Baseline
perf/x86/lbr: Enable the branch type for the Arch LBR by default
- Fixup setup of weak groups when using 'perf stat --repeat', add a
'perf test' for it.
- Fix memory leaks in 'perf sched record' detected with -fsanitize=address.
- Fix build when PYTHON_CONFIG is user supplied.
- Capitalize topdown metrics' names in 'perf stat', so that the output,
sometimes parsed, matches the Intel SDM docs.
- Make sure the documentation for the save_type filter about Intel
systems with Arch LBR support (12th-Gen+ client or 4th-Gen Xeon+
server) reflects recent related kernel changes.
- Fix 'perf record' man page formatting of description of support to hybrid systems.
- Update arm64´s KVM header from the kernel sources.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYwo57wAKCRCyPKLppCJ+
J4XKAP9nY5lAQak+i+Oce+Cd7TsNXJ9nubey4+dMkDoK4t4loAD7Bu+eDo0FF/F4
iGsOhtqgGD+jdguqhgemPRPNHFb5bQI=
=ETh0
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.0-2022-08-27' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fixup setup of weak groups when using 'perf stat --repeat', add a
'perf test' for it.
- Fix memory leaks in 'perf sched record' detected with
-fsanitize=address.
- Fix build when PYTHON_CONFIG is user supplied.
- Capitalize topdown metrics' names in 'perf stat', so that the output,
sometimes parsed, matches the Intel SDM docs.
- Make sure the documentation for the save_type filter about Intel
systems with Arch LBR support (12th-Gen+ client or 4th-Gen Xeon+
server) reflects recent related kernel changes.
- Fix 'perf record' man page formatting of description of support to
hybrid systems.
- Update arm64´s KVM header from the kernel sources.
* tag 'perf-tools-fixes-for-v6.0-2022-08-27' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf stat: Capitalize topdown metrics' names
perf docs: Update the documentation for the save_type filter
perf sched: Fix memory leaks in __cmd_record detected with -fsanitize=address
perf record: Fix manpage formatting of description of support to hybrid systems
perf test: Stat test for repeat with a weak group
perf stat: Clear evsel->reset_group for each stat run
tools kvm headers arm64: Update KVM header from the kernel sources
perf python: Fix build when PYTHON_CONFIG is user supplied
