Make sure to drop the of_node reference taken in fixed_phy_register()
when deregistering a PHY.
Fixes: a759512174 ("net: phy: extend fixed driver with
fixed_phy_register()")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure to drop the reference taken by bus_find_device() before
returning NULL from of_phy_find_device() when the found device is not a
PHY.
Fixes: 6ed742363b ("of: of_mdio: Ensure mdio device is a PHY")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure to drop the of_node reference also on failure to parse the
speed property in of_phy_register_fixed_link().
Fixes: 3be2a49e5c ("of: provide a binding for fixed link PHYs")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrei reports we still allocate netns ID from idr after we destroy
it in cleanup_net().
cleanup_net():
...
idr_destroy(&net->netns_ids);
...
list_for_each_entry_reverse(ops, &pernet_list, list)
ops_exit_list(ops, &net_exit_list);
-> rollback_registered_many()
-> rtmsg_ifinfo_build_skb()
-> rtnl_fill_ifinfo()
-> peernet2id_alloc()
After that point we should not even access net->netns_ids, we
should check the death of the current netns as early as we can in
peernet2id_alloc().
For net-next we can consider to avoid sending rtmsg totally,
it is a good optimization for netns teardown path.
Fixes: 0c7aecd4bd ("netns: add rtnl cmd to add and get peer netns ids")
Reported-by: Andrei Vagin <avagin@gmail.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now with musb driver implementing generic session bit based
PM, we need to have the USB PHYs behaving in a sane way for
platforms implementing PM.
Currently twl4030-usb enables PM in twl4030_phy_power_on()
and then disables it in twl4030_phy_power_off(). This will
block PM runtime for the SoC when no cable is connected.
Fix the issue by moving PM runtime autosuspend call to
happen where it gets called in twl4030_phy_power_on().
Note that this patch should not be backported to anything
before commit 467d5c9807 ("usb: musb: Implement session bit
based runtime PM for musb-core") as before that all the
glue layers implemented their own PM.
Fixes: 467d5c9807 ("usb: musb: Implement session bit based
runtime PM for musb-core")
Tested-by: Ladislav Michl <ladis@linux-mips.org>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This already gets done automatically by PM runtime and we have
a separate autosuspend timeout in musb_core.c.
Reviewed-by: Johan Hovold <johan@kernel.org>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We are missing pm_runtime_disable() in 2430 glue layer. Further,
we only need to enable PM runtime and disable it on exit. With
musb_core.c doing PM, the glue layer as a parent will always be
active when musb_core.c is active.
This fixes host enumeration issues with some devices as reported
by Ladislav Michl <ladis@linux-mips.org>.
And holding an RPM reference while deregistering the child would
lead to a crash in omap2430_runtime_suspend() which dereferences
the now freed child's driver data on put as pointed out by
Johan Hovold <johan@kernel.org>:
Unable to handle kernel paging request at virtual address 6b6b6f17
...
[<c05453d4>] (omap2430_runtime_suspend) from [<c0481410>]
(pm_generic_runtime_suspend+0x3c/0x48)
[<c0481410>] (pm_generic_runtime_suspend) from [<c0121028>]
(_od_runtime_suspend+0x1c/0x30)
[<c0121028>] (_od_runtime_suspend) from [<c04833b0>] (__rpm_callback+0x3c/0x70)
[<c04833b0>] (__rpm_callback) from [<c0483414>] (rpm_callback+0x30/0x90)
[<c0483414>] (rpm_callback) from [<c0483984>] (rpm_suspend+0x118/0x6b4)
[<c0483984>] (rpm_suspend) from [<c04840f4>] (rpm_idle+0x104/0x440)
[<c04840f4>] (rpm_idle) from [<c04844ac>] (__pm_runtime_idle+0x7c/0xb0)
[<c04844ac>] (__pm_runtime_idle) from [<c0545458>] (omap2430_remove+0x38/0x58)
[<c0545458>] (omap2430_remove) from [<c047b2bc>] (platform_drv_remove+0x34/0x4c)
Note that if changes are needed to the autosuspend timeout, it should
be done in musb_core.c.
Reported-by: Ladislav Michl <ladis@linux-mips.org>
Fixes: 87326e8584 ("usb: musb: Remove extra PM runtime calls from
2430 glue layer")
Tested-by: Ladislav Michl <ladis@linux-mips.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With a USB hub disconnected, devctl can be 0x19 for about a second
on am335x and will stay forever on at least omap3. And we get no
further interrupts when devctl session bit clears. This keeps
PM runtime active.
Let's fix the issue by polling devctl until the session bit clears
or times out. We can do this by making musb->irq_work into
delayed_work.
And with the polling implemented, we can now also have the quirk
for invalid VBUS it to avoid disconnecting too early while VBUS
is ramping up.
Fixes: 467d5c9807 ("usb: musb: Implement session bit based runtime
PM for musb-core")
Fixes: 65b3f50ed6 ("usb: musb: Add PM runtime support for MUSB DSPS
Tested-by: Ladislav Michl <ladis@linux-mips.org>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 65b3f50ed6 ("usb: musb: Add PM runtime support for MUSB DSPS
glue layer") wrongly added a call for pm_runtime_get_sync to otg_timer
that runs in softirq context. That causes a "BUG: sleeping function called
from invalid context" every time when polling the cable status:
[<c015ebb4>] (__might_sleep) from [<c0413d60>] (__pm_runtime_resume+0x9c/0xa0)
[<c0413d60>] (__pm_runtime_resume) from [<c04d0bc4>] (otg_timer+0x3c/0x254)
[<c04d0bc4>] (otg_timer) from [<c0191180>] (call_timer_fn+0xfc/0x41c)
[<c0191180>] (call_timer_fn) from [<c01915c0>] (expire_timers+0x120/0x210)
[<c01915c0>] (expire_timers) from [<c0191acc>] (run_timer_softirq+0xa4/0xdc)
[<c0191acc>] (run_timer_softirq) from [<c010168c>] (__do_softirq+0x12c/0x594)
I did not notice that as I did not have CONFIG_DEBUG_ATOMIC_SLEEP enabled.
And looks like also musb_gadget_queue() suffers from the same problem.
Let's fix the issue by using a list of delayed work then call it on
resume. Note that we want to do this only when musb core and it's
parent devices are awake, and we need to make sure the DSPS glue
timer is stopped as noted by Johan Hovold <johan@kernel.org>.
Note that we already are re-enabling the timer with mod_timer() in
dsps_musb_enable().
Later on we may be able to remove other delayed work in the musb driver
and just do it from pending_resume_work. But this should be done only
for delayed work that does not have other timing requirements beyond
just being run on resume.
Fixes: 65b3f50ed6 ("usb: musb: Add PM runtime support for MUSB DSPS
glue layer")
Reported-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We can't use static variable first for checking when musb is
initialized when we have multiple musb instances like on am335x.
Tested-by: Ladislav Michl <ladis@linux-mips.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Building the caam driver on arm64 produces a harmless warning:
drivers/crypto/caam/caamalg.c:140:139: warning: comparison of distinct pointer types lacks a cast
We can use min_t to tell the compiler which type we want it to use
here.
Fixes: 5ecf8ef910 ("crypto: caam - fix sg dump")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix use of u32 instead of int for checking for negative errors values
as pointed out by Dan Carpenter <dan.carpenter@oracle.com>.
And while testing the PM runtime error path by randomly returning
failed values in runtime resume, I noticed two more places that need
fixing:
- If pm_runtime_get_sync() fails in probe, we still need to do
pm_runtime_put_sync() to keep the use count happy. We could call
pm_runtime_put_noidle() on the error path, but we're just going
to call pm_runtime_disable() after that so pm_runtime_put_sync()
will do what we want
- We should print an error if pm_runtime_get_sync() fails in
cppi41_dma_alloc_chan_resources() so we know where it happens
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 740b4be3f7 ("dmaengine: cpp41: Fix handling of error path")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The latest binutils are warning about a .fill directive with an explicit
value in a .bss section:
arch/x86/kernel/head_32.S: Assembler messages:
arch/x86/kernel/head_32.S:677: Warning: ignoring fill value in section `.bss..page_aligned'
arch/x86/kernel/head_32.S:679: Warning: ignoring fill value in section `.bss..page_aligned'
This comes from the 'ENTRY()' macro padding the space between the symbols
with 'nop' via:
.align 4,0x90
Open-coding the .globl directive without the padding avoids that warning,
as all the symbols are already page aligned.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161116141726.2013389-1-arnd@arndb.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
iov_iter_advance() needs to decrement iter->count by the number of
bytes we'd moved beyond. Normal flavours do that, but ITER_PIPE
doesn't and ITER_PIPE generic_file_read_iter() for O_DIRECT files
ends up with a bogus fallback to page cache read, resulting in incorrect
values for file offset and bytes read.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The IOP_XATTR flag is set on sockfs because sockfs supports getting the
"system.sockprotoname" xattr. Since commit 6c6ef9f2, this flag is checked for
setxattr support as well. This is wrong on sockfs because security xattr
support there is supposed to be provided by security_inode_setsecurity. The
smack security module relies on socket labels (xattrs).
Fix this by adding a security xattr handler on sockfs that returns
-EAGAIN, and by checking for -EAGAIN in setxattr.
We cannot simply check for -EOPNOTSUPP in setxattr because there are
filesystems that neither have direct security xattr support nor support
via security_inode_setsecurity. A more proper fix might be to move the
call to security_inode_setsecurity into sockfs, but it's not clear to me
if that is safe: we would end up calling security_inode_post_setxattr after
that as well.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a missing synchronize_net() call to avoid potential use after free,
since we explicitly call napi_hash_del() to factorize the RCU grace
period.
Fixes: c0c050c58d ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We currently have a fundamental problem in how we treat the CPU port and
its VLAN membership. As soon as a second VLAN is configured to be
untagged, the CPU automatically becomes untagged for that VLAN as well,
and yet, we don't gracefully make sure that the CPU becomes tagged in
the other VLANs it could be a member of. This results in only one VLAN
being effectively usable from the CPU's perspective.
Instead of having some pretty complex logic which tries to maintain the
CPU port's default VLAN and its untagged properties, just do something
very simple which consists in neither altering the CPU port's PVID
settings, nor its untagged settings:
- whenever a VLAN is added, the CPU is automatically a member of this
VLAN group, as a tagged member
- PVID settings for downstream ports do not alter the CPU port's PVID
since it now is part of all VLANs in the system
This means that a typical example where e.g: LAN ports are in VLAN1, and
WAN port is in VLAN2, now require having two VLAN interfaces for the
host to properly terminate and send traffic from/to.
Fixes: Fixes: a2482d2ce3 ("net: dsa: b53: Plug in VLAN support")
Reported-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=TZCv
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.9-rc6' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes fr9om Dave Airlie:
"Fixes for amdgpu, and a bunch of arm drivers.
There seems to be an uptick in the ARM drivers sending things for
fixes which is good, so I've decided to dequeue a bit early, more
stuff may arrive before the weekend.
This contains mediatek, arcpgu, sunxi, fsl-dcu display controller
fixes along with 3 amdgpu fixes, one for a fencing issue with
secondary GPUs"
* tag 'drm-fixes-for-v4.9-rc6' of git://people.freedesktop.org/~airlied/linux:
drm/amdgpu:fix vpost_needed routine
drm/amdgpu/powerplay: drop a redundant NULL check
drm/amdgpu: Attach exclusive fence to prime exported bo's. (v5)
drm/arcpgu: Accommodate adv7511 switch to DRM bridge
drm/fsl-dcu: disable planes before disabling CRTC
drm/fsl-dcu: update all registers on flush
drm/fsl-dcu: do not update when modifying irq registers
drm/sun4i: Propagate error to the caller
drm/sun4i: Fix error handling
drm/mediatek: modify the factor to make the pll_rate set in the 1G-2G range
drm/mediatek: enhance the HDMI driving current
drm/mediatek: do mtk_hdmi_send_infoframe after HDMI clock enable
drm/mediatek: clear IRQ status before enable OVL interrupt
drm/mediatek: set vblank_disable_allowed to true
drm/mediatek: fix a typo of OD_CFG to OD_RELAYMODE
drm/sun4i: rgb: Remove the bridge enable/disable functions
drm/sun4i: rgb: Enable panel after controller
Also, rearrange things a bit to have a common c4iw_invalidate_mr()
function used everywhere that we need to invalidate.
Fixes: 49b53a93a6 ("iw_cxgb4: add fast-path for small REG_MR operations")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There are a few cases in c4iw_post_send() and c4iw_post_receive()
where *bad_wr is not set when an error is returned. This can
cause a crash if the application tries to use bad_wr.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The method rxe_qp_error() transitions QP to error state
and make sure the QP is drained. It did not though update
the QP state for user's query.
This patch fixes this.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
RXE resets the send-q only once in rxe_qp_init_req() when
QP is created, but when the QP is reused after QP reset, the send-q
holds previous garbage data.
This garbage data wrongly fails CQEs that otherwise
should have completed successfully.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
To correctly handle a erroneous WR this fix does the following
1. Make sure the bad WQE causes a user completion event.
2. Call rxe_completer to handle the erred WQE.
Before the fix, when rxe_requester found a bad WQE, it changed its
status to IB_WC_LOC_PROT_ERR and exit with 0 for non RC QPs.
If this was the 1st WQE then there would be no ACK to invoke the
completer and this bad WQE would be stuck in the QP's send-q.
On top of that the requester exiting with 0 caused rxe_do_task to
endlessly invoke rxe_requester, resulting in a soft-lockup attached
below.
In case the WQE was not the 1st and rxe_completer did get a chance to
handle the bad WQE, it did not cause a complete event since the WQE's
IB_SEND_SIGNALED flag was not set.
Setting WQE status to IB_SEND_SIGNALED is subject to IBA spec
version 1.2.1, section 10.7.3.1 Signaled Completions.
NMI watchdog: BUG: soft lockup - CPU#7 stuck for 22s!
[<ffffffffa0590145>] ? rxe_pool_get_index+0x35/0xb0 [rdma_rxe]
[<ffffffffa05952ec>] lookup_mem+0x3c/0xc0 [rdma_rxe]
[<ffffffffa0595534>] copy_data+0x1c4/0x230 [rdma_rxe]
[<ffffffffa058c180>] rxe_requester+0x9d0/0x1100 [rdma_rxe]
[<ffffffff8158e98a>] ? kfree_skbmem+0x5a/0x60
[<ffffffffa05962c9>] rxe_do_task+0x89/0xf0 [rdma_rxe]
[<ffffffffa05963e2>] rxe_run_task+0x12/0x30 [rdma_rxe]
[<ffffffffa059110a>] rxe_post_send+0x41a/0x550 [rdma_rxe]
[<ffffffff811ef922>] ? __kmalloc+0x182/0x200
[<ffffffff816ba512>] ? down_read+0x12/0x40
[<ffffffffa054bd32>] ib_uverbs_post_send+0x532/0x540 [ib_uverbs]
[<ffffffff815f8722>] ? tcp_sendmsg+0x402/0xb80
[<ffffffffa05453dc>] ib_uverbs_write+0x18c/0x3f0 [ib_uverbs]
[<ffffffff81623c2e>] ? inet_recvmsg+0x7e/0xb0
[<ffffffff8158764d>] ? sock_recvmsg+0x3d/0x50
[<ffffffff81215b87>] __vfs_write+0x37/0x140
[<ffffffff81216892>] vfs_write+0xb2/0x1b0
[<ffffffff81217ce5>] SyS_write+0x55/0xc0
[<ffffffff816bc672>] entry_SYSCALL_64_fastpath+0x1a/0xa
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Currently, if ib_copy_to_udata fails, the CQ
won't be deleted from the radix tree and the HW (HW2SW).
Fixes: 225c7b1fee ('IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters')
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Check the returned GID index value and return an error if it is invalid.
Fixes: 5070cd2239 ('IB/mlx4: Replace mechanism for RoCE GID management')
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
For XRC QP CQs may not exist. Check before attempting dereference.
Fixes: e126ba97db ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When an internal error condition is detected, make sure to set the
device inactive after dispatching the event so ULPs can get a
notification of this event.
Fixes: e126ba97db ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When calling reg_mr of large MRs (e.g. 4GB) from multiple processes
and MR caches can't supply the required amount of MRs the slow-path
of MR allocation may be used. In this case we need to serialize the
slow-path between the processes to avoid soft lock.
Fixes: e126ba97db ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Moshe Lazer <moshel@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When creating kernel CQs use 128B CQE stride if the
cache line size is 128B, 64B otherwise. This prevents
multiple CQEs from residing in a 128B cache line,
which can cause retries when there are concurrent
read and writes in one cache line.
Tested with IPoIB on PPC64, saw ~5% throughput
improvement.
Fixes: e126ba97db ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Validate that the requested size of RQT is supported by firmware.
Fixes: c5f9092936 ('IB/mlx5: Add Receive Work Queue Indirection table operations')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
We need to free dev->port when we fail to enable RoCE or
initialize node data.
Fixes: 0837e86a7a ('IB/mlx5: Add per port counters')
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
sg_alloc_table gets unsigned int as parameter while the driver
returns it as size_t. Check npages isn't greater than maximum
unsigned int.
Fixes: eeb8461e36 ("IB: Refactor umem to use linear SG table")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When calling rdma_resolve_ip inside rdma_addr_find_l2_eth_by_grh,
the return status of the request was ignored in the callback function
causing a successful return and an empty dmac.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Alex Vesker <valex@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
On Thu, Oct 27, 2016 at 04:36:28PM +0300, Leon Romanovsky wrote:
> From: Mark Bloch <markb@mellanox.com>
>
> If the underlying netowrk type is ipv4 or ipv6 and the device supports
> routable RoCE, prefer it so the traffic could cross subnets.
>
> Signed-off-by: Mark Bloch <markb@mellanox.com>
> Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
> Signed-off-by: Leon Romanovsky <leon@kernel.org>
> ---
Hi Doug,
Please take the following v1 of this patch where I fixed spelling error
from "netowrk" to be "network".
Thanks.
>From 09f96ba3e9b4442cfb44dca04c6726e55525c9c3 Mon Sep 17 00:00:00 2001
From: Mark Bloch <markb@mellanox.com>
Date: Sun, 11 Sep 2016 06:25:10 +0000
Subject: [PATCH rdma-rc v1 3/6] IB/core: Set routable RoCE gid type for ipv4/ipv6
networks
If the underlying network type is ipv4 or ipv6 and the device supports
routable RoCE, prefer it so the traffic could cross subnets.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When there is a CM id object that has port assigned to it, it means that
the cm-id asked for the specific port that it should go by it, but if
that port was removed (hot-unplug event) the cm-id was not updated.
In order to fix that the port keeps a list of all the cm-id's that are
planning to go by it, whenever the port is removed it marks all of them
as invalid.
This commit fixes a kernel panic which happens when running traffic between
guests and we force reboot a guest mid traffic, it triggers a kernel panic:
Call Trace:
[<ffffffff815271fa>] ? panic+0xa7/0x16f
[<ffffffff8152b534>] ? oops_end+0xe4/0x100
[<ffffffff8104a00b>] ? no_context+0xfb/0x260
[<ffffffff81084db2>] ? del_timer_sync+0x22/0x30
[<ffffffff8104a295>] ? __bad_area_nosemaphore+0x125/0x1e0
[<ffffffff81084240>] ? process_timeout+0x0/0x10
[<ffffffff8104a363>] ? bad_area_nosemaphore+0x13/0x20
[<ffffffff8104aabf>] ? __do_page_fault+0x31f/0x480
[<ffffffff81065df0>] ? default_wake_function+0x0/0x20
[<ffffffffa0752675>] ? free_msg+0x55/0x70 [mlx5_core]
[<ffffffffa0753434>] ? cmd_exec+0x124/0x840 [mlx5_core]
[<ffffffff8105a924>] ? find_busiest_group+0x244/0x9f0
[<ffffffff8152d45e>] ? do_page_fault+0x3e/0xa0
[<ffffffff8152a815>] ? page_fault+0x25/0x30
[<ffffffffa024da25>] ? cm_alloc_msg+0x35/0xc0 [ib_cm]
[<ffffffffa024e821>] ? ib_send_cm_dreq+0xb1/0x1e0 [ib_cm]
[<ffffffffa024f836>] ? cm_destroy_id+0x176/0x320 [ib_cm]
[<ffffffffa024fb00>] ? ib_destroy_cm_id+0x10/0x20 [ib_cm]
[<ffffffffa034f527>] ? ipoib_cm_free_rx_reap_list+0xa7/0x110 [ib_ipoib]
[<ffffffffa034f590>] ? ipoib_cm_rx_reap+0x0/0x20 [ib_ipoib]
[<ffffffffa034f5a5>] ? ipoib_cm_rx_reap+0x15/0x20 [ib_ipoib]
[<ffffffff81094d20>] ? worker_thread+0x170/0x2a0
[<ffffffff8109b2a0>] ? autoremove_wake_function+0x0/0x40
[<ffffffff81094bb0>] ? worker_thread+0x0/0x2a0
[<ffffffff8109aef6>] ? kthread+0x96/0xa0
[<ffffffff8100c20a>] ? child_rip+0xa/0x20
[<ffffffff8109ae60>] ? kthread+0x0/0xa0
[<ffffffff8100c200>] ? child_rip+0x0/0x20
Fixes: a977049dac ("[PATCH] IB: Add the kernel CM implementation")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The real QP is destroyed in case of the ref count reaches zero, but
for XRC target QPs this call was missed and caused to QP leaks.
Let's call to destroy for all flows.
Fixes: 0e0ec7e063 ('RDMA/core: Export ib_open_qp() to share XRC...')
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
- fix register dumps, stack dumps and stack traces that got torn due to
recent printk changes;
- wire up pkey_{mprotect,alloc,free} syscalls.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=AKKC
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20161116' of git://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa fixes from Max Filippov:
- fix register dumps, stack dumps and stack traces that got torn due to
recent printk changes
- wire up pkey_{mprotect,alloc,free} syscalls
* tag 'xtensa-20161116' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: wire up new pkey_{mprotect,alloc,free} syscalls
xtensa: clean up printk usage for boot/crash logging
Commit 7619751f8c ("ARM: 8595/2: apply more __ro_after_init") caused
a regression with XIP kernels by moving the __ro_after_init data into
the read-only section. With XIP kernels, the read-only section is
located in read-only memory from the very beginning.
Work around this by moving the __ro_after_init data back into the .data
section, which will be in RAM, and hence will be writable.
It should be noted that in doing so, this remains writable after init.
Fixes: 7619751f8c ("ARM: 8595/2: apply more __ro_after_init")
Reported-by: Andrea Merello <andrea.merello@gmail.com>
Tested-by: Andrea Merello <andrea.merello@gmail.com> [ XIP stm32 ]
Tested-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Just a few bug fixes for 4.9. The big one is Mario's prime fencing fix.
* 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu:fix vpost_needed routine
drm/amdgpu/powerplay: drop a redundant NULL check
drm/amdgpu: Attach exclusive fence to prime exported bo's. (v5)
This branch include one patch to fix a typo, two patches to disable
vblank interrupt, and three patches to support HDMI 4K resolution.
* 'mediatek-drm-fixes-2016-11-11' of https://github.com/ckhu-mediatek/linux.git-tags:
drm/mediatek: modify the factor to make the pll_rate set in the 1G-2G range
drm/mediatek: enhance the HDMI driving current
drm/mediatek: do mtk_hdmi_send_infoframe after HDMI clock enable
drm/mediatek: clear IRQ status before enable OVL interrupt
drm/mediatek: set vblank_disable_allowed to true
drm/mediatek: fix a typo of OD_CFG to OD_RELAYMODE
With RGMII, we need a 1.5 to 2ns skew between clock and data lines. The
VSC8601 can handle this internally. While the VSC8601 can set more
fine-grained delays, the standard skew settings work out of the box.
The same heuristic is used to determine when this skew should be enabled
as in vsc824x_config_init().
Tested on custom board with AM3352 SOC and VSC801 PHY.
Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Calling napi_hash_del() before netif_napi_del() is dangerous
if a synchronize_rcu() is not enforced before NAPI struct freeing.
Lets leave this detail to core networking stack and feel
more comfortable.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Hariprasad S <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Calling napi_hash_del() before netif_napi_del() is dangerous
if a synchronize_rcu() is not enforced before NAPI struct freeing.
Lets leave this detail to core networking stack and feel
more comfortable.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Sathya Perla <sathya.perla@broadcom.com>
Cc: Ajit Khaparde <ajit.khaparde@broadcom.com>
Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Cc: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid breaking cross-compiled ACPI tools builds by rearranging the
handling of kernel header files.
This patch also contains OUTPUT/srctree cleanups in order to make above fix
working for various build environments.
Fixes: e323c02dee (ACPICA: MSVC9: Fix <sys/stat.h> inclusion order issue)
Reported-and-tested-by: Yisheng Xie <xieyisheng1@huawei.com>
Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It seems many drivers do not respect napi_hash_del() contract.
When napi_hash_del() is used before netif_napi_del(), an RCU grace
period is needed before freeing NAPI object.
Fixes: 91815639d8 ("virtio-net: rx busy polling support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This option was added in 6a89a314ab to
allow use of the devm_gpio_* functions without CONFIG_GPIOLIB.
However, only a few months later in
b69ac52449, CONFIG_GPIOLIB was added
as a dependency, defeating the original purpose of this option.
Instead of that patch, the original commit could have just been
reverted (and in fact was partially so in
403c1d0be5). Further, since this
option has a dependency on HAS_IOMEM, even though it does not
require it, it causes build failures when !HAS_IOMEM (e.g. in a
uml build).
Fix that by completely removing the option, in essence completing
the reversion of the original commit.
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The nvme_remove function tears down all allocated resources in the correct
order, so no need to free queues on error during initialization. This
fixes possible use-after-free errors when queues are still associated
with a blk-mq hctx.
Reported-by: Scott Bauer <scott.bauer@intel.com>
Tested-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimbeg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
check array index first and then visit the array.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
