These function declarations are not needed any more.
The definitions were deleted.
Fixes: 2ab6096db2 ("xfrm: remove output_finish indirection from xfrm_state_afinfo")
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Both functions are very similar, so merge them into one.
The nexthdr is passed as argument to break the loop in the
ROUTING case, this is the only header type where slightly different
rules apply.
While at it, the merged function is realigned with
ip6_find_1stfragopt(). That function received bug fixes for an infinite
loop, but neither dstopt nor rh parsing functions (copy-pasted from
ip6_find_1stfragopt) were changed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
After previous patches all remaining users set the function pointer to
the same function: xfrm6_find_1stfragopt.
So remove this function pointer and call ip6_find_1stfragopt directly.
Reduces size of xfrm_type to 64 bytes on 64bit platforms.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Place the call into the xfrm core. After this all remaining users
set the hdr_offset function pointer to the same function which opens
the possiblity to remove the indirection.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This helper is relatively small, just move this to the xfrm core
and call it directly.
Next patch does the same for the ROUTING type.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This moves the ->hdr_offset indirect call to a new helper.
A followup patch can then modify the new function to replace
the indirect call by direct calls to the required hdr_offset helper.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Its set but never read. Reduces size of xfrm_type to 64 bytes on 64bit.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
It is not necessary to define variables to receive -ENOMEM,
directly return -ENOMEM.
Signed-off-by: zuoqilin <zuoqilin@yulong.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When creating new states with seq set in xfrm_usersa_info, we walk
through all the states already installed in that netns to find a
matching ACQUIRE state (__xfrm_find_acq_byseq, called from
xfrm_state_add). This causes severe slowdowns on systems with a large
number of states.
This patch introduces a hashtable using x->km.seq as key, so that the
corresponding state can be found in a reasonable time.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Making '!=' operation with 0 directly after calling
the function xfrm_parse_spi() is more efficient,
assignment to err is redundant.
Eliminate the following clang_analyzer warning:
net/ipv4/esp4_offload.c:41:7: warning: Although the value stored to
'err' is used in the enclosing expression, the value is never actually
read from 'err'
No functional change, only more efficient.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows
that, in the worst scenario, could lead to heap overflows.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows
that, in the worst scenario, could lead to heap overflows.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The first parameter passed to chnl_recv_cb() can never be NULL since all
callers dereferenced it. Consequently, container_of() on it is also never
NULL, even though the reference into the structure points to the first
element of the structure. The NULL check is therefore unnecessary.
On top of that, it is misleading to perform a NULL check on the result of
container_of() because the position of the contained element could change,
which would make the test invalid. Remove the unnecessary NULL check.
This change was made automatically with the following Coccinelle script.
@@
type t;
identifier v;
statement s;
@@
<+...
(
t v = container_of(...);
|
v = container_of(...);
)
...
when != v
- if (\( !v \| v == NULL \) ) s
...+>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The variable rc is being initialized with a value that is never read,
it is being updated later on. The assignment is redundant and can be
removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xuan Zhuo says:
====================
virtio-net: fix for build_skb()
The logic of this piece is really messy. Fortunately, my refactored patch can be
completed with a small amount of testing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In the case of merge, the page passed into page_to_skb() may be a head
page, not the page where the current data is located. So when trying to
get the buf where the data is located, you should directly use the
pointer(p) to get the address corresponding to the page.
At the same time, the offset of the data in the page should also be
obtained using offset_in_page().
This patch solves this problem. But if you don’t use this patch, the
original code can also run, because if the page is not the page of the
current data, the calculated tailroom will be less than 0, and will not
enter the logic of build_skb() . The significance of this patch is to
modify this logical problem, allowing more situations to use
build_skb().
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gatis Peisenieks says:
====================
atl1c: support for Mikrotik 10/25G NIC features
The new Mikrotik 10/25G NIC maintains compatibility with existing atl1c
driver. However it does have new features.
This patch set adds support for reporting cards higher link speed, max-mtu,
enables rx csum offload and improves tx performance.
v2:
- fixed xmit_more handling as pointed out by Eric Dumazet
- added a more reliable link detection on Mikrotik 10/25G NIC
since MDIO op emulation can occasionally fail
Guangbin Huang says:
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Mikrotik 10/25G NIC emulates the MDIO accesses, but the emulation is
not 100% reliable - the MDIO ops occasionally can timeout.
This adds a reliable way of detecting link on Mikrotik 10/25G NIC.
Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mikrotik 10/25G NIC supports hw checksum verification on rx for
IP/IPv6 + TCP/UDP packets. HW checksum offload helps reduce host
cpu load.
This enables the csum offload specifically for Mikrotik 10/25G NIC
as other HW supported by the driver is known to have problems with it.
TCP iperf3 to Threadripper 3960X with NIC improved 16.5 -> 20.0 Gbps
with mtu=1500.
Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The new Mikrotik 10/25G NIC supports jumbo frames. Jumbo frames are
supported for TSO as well.
This enables the support for mtu up to 9500 bytes.
Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The kernel has xmit_more facility that hints the networking driver xmit
path about whether more packets are coming soon. This information can be
used to avoid unnecessary expensive PCIe transaction per tx packet.
Max TX pps on Mikrotik 10/25G NIC in a Threadripper 3960X system
improved from 1150Kpps to 1700Kpps.
Testing L2 forwarding on AR8151 hardware did not reveal a measurable
increase in latency.
Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The new Mikrotik 10/25G NIC maintains compatibility with existing atl1c
driver. However it does have new features.
This defines some new register offsets, code for identifying the new type
of NIC and correct speed detection for the NIC.
Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang says:
====================
net: hinic: some cleanups
This patchset adds some cleanups for the hinic ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The word "acessing" is misspelled, so fix it.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are some unnecessary parentheses, this patch deletes them.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There should be a blank line after function declaration, so add two
missed blank lines.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two blank lines are unnecessary, this patch removes them.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Lüssing says:
====================
net: bridge: split IPv4/v6 mc router state and export for batman-adv
The following patches are splitting the so far combined multicast router
state in the Linux bridge into two ones, one for IPv4 and one for IPv6,
for a more fine-grained detection of multicast routers. This avoids
sending IPv4 multicast packets to an IPv6-only multicast router and
avoids sending IPv6 multicast packets to an IPv4-only multicast router.
This also allows batman-adv to make use of the now split information in
the final patch.
The first eight patches prepare the bridge code to avoid duplicate
code or IPv6-#ifdef clutter for the multicast router state split. And
contain no functional changes yet.
The ninth patch then implements the IPv4+IPv6 multicast router state
split.
Patch number ten adds IPv4+IPv6 specific timers to the mdb netlink
router port dump, so that the timers validity can be checked individually
from userspace.
The final, eleventh patch exports this now per protocol family multicast
router state so that batman-adv can then later make full use of the
Multicast Router Discovery (MRD) support in the Linux bridge. The
batman-adv protocol format currently expects separate multicast router
states for IPv4 and IPv6, therefore it depends on the first patch.
batman-adv will then make use of this newly exported functions like
this[0].
Regards, Linus
[0]: https://git.open-mesh.org/batman-adv.git/shortlog/refs/heads/linus/multicast-routeable-mrd
-> https://git.open-mesh.org/batman-adv.git/commit/d4bed3a92427445708baeb1f2d1841c5fb816fd4
Changelog v3:
* Patch 01/11:
* fixed/added missing rename of br->router_list to
br->ip4_mc_router_list in br_multicast_flood()
* Patch 02/11:
* moved inline functions from br_forward.c to br_private.h
* Patch 03/11:
* removed inline attribute from functions added to br_mdb.c
* Patch 04/11:
* unchanged
* Patch 05/11:
* converted if()'s into switch-case in br_multicast_is_router()
* Patch 06/11:
* removed inline attribute from function added to br_multicast.c
* Patch 07/11:
* added missing static attribute to function
br_ip4_multicast_get_rport_slot() added to br_multicast.c
* Patch 08/11:
* removed inline attribute from function added to br_multicast.c
* Patch 09/11:
* added missing static attribute to function
br_ip6_multicast_get_rport_slot() added to br_multicast.c
* removed inline attribute from function added to br_multicast.c
* Patch 10/11:
* unchanged
* Patch 11/11:
* simplified bridge check in br_multicast_has_router_adjacent()
by using br_port_get_check_rcu()
* added missing declaration for br_multicast_has_router_adjacent()
in include/linux/if_bridge.h
Changelog v2:
* split into multiple patches as suggested by Nikolay
* added helper functions to br_multicast_flood(), avoiding
IPv6 #ifdef clutter
* fixed reverse xmas tree ordering in br_rports_fill_info() and
added helper functions to avoid IPv6 #ifdef clutter
* Added a common br_multicast_add_router() and a helper function
to retrieve the correct slot to avoid duplicate code for an
ip4 and ip6 variant
* replaced the "1" and "2" constants in br_multicast_is_router()
with the appropriate enums
* added br_{ip4,ip6}_multicast_rport_del() wrappers to reduce
IPv6 #ifdef clutter
* added return values to br_*multicast_rport_del() to only notify
if the port was actually removed and did not race with a readdition
somewhere else
* added empty, void br_ip6_multicast_mark_router() if compiled
without IPv6, to reduce IPv6 #ifdef clutter
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
To properly support routable multicast addresses in batman-adv in a
group-aware way, a batman-adv node needs to know if it serves multicast
routers.
This adds a function to the bridge to export this so that batman-adv
can then make full use of the Multicast Router Discovery capability of
the bridge.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we have split the multicast router state into two, one for IPv4
and one for IPv6, also add individual timers to the mdb netlink router
port dump. Leaving the old timer attribute for backwards compatibility.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
A multicast router for IPv4 does not imply that the same host also is a
multicast router for IPv6 and vice versa.
To reduce multicast traffic when a host is only a multicast router for
one of these two protocol families, keep router state for IPv4 and IPv6
separately. Similar to how querier state is kept separately.
For backwards compatibility for netlink and switchdev notifications
these two will still only notify if a port switched from either no
IPv4/IPv6 multicast router to any IPv4/IPv6 multicast router or the
other way round. However a full netlink MDB router dump will now also
include a multicast router timeout for both IPv4 and IPv6.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for the upcoming split of multicast router state into
their IPv4 and IPv6 variants split router port deletion and notification
into two functions. When we disable a port for instance later we want to
only send one notification to switchdev and netlink for compatibility
and want to avoid sending one for IPv4 and one for IPv6. For that the
split is needed.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for the upcoming split of multicast router state into
their IPv4 and IPv6 variants move the protocol specific router list
and timer access to ip4 wrapper functions.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for the upcoming split of multicast router state into
their IPv4 and IPv6 variants move the protocol specific timer access to
an ip4 wrapper function.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for the upcoming split of multicast router state into
their IPv4 and IPv6 variants make br_multicast_is_router() protocol
family aware.
Note that for now br_ip6_multicast_is_router() uses the currently still
common ip4_mc_router_timer for now. It will be renamed to
ip6_mc_router_timer later when the split is performed.
While at it also renames the "1" and "2" constants in
br_multicast_is_router() to the MDB_RTR_TYPE_TEMP_QUERY and
MDB_RTR_TYPE_PERM enums.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for the upcoming split of multicast router state into
their IPv4 and IPv6 variants and as the br_multicast_mark_router() will
be split for that remove the select querier wrapper and instead add
ip4 and ip6 variants for br_multicast_query_received().
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for the upcoming split of multicast router state into
their IPv4 and IPv6 variants and to avoid IPv6 #ifdef clutter later add
some inline functions for the protocol specific parts in the mdb router
netlink code. Also the we need iterate over the port instead of router
list to be able put one router port entry with both the IPv4 and IPv6
multicast router info later.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for the upcoming split of multicast router state into
their IPv4 and IPv6 variants and to avoid IPv6 #ifdef clutter later add
two wrapper functions for router node retrieval in the payload
forwarding code.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for the upcoming split of multicast router state into
their IPv4 and IPv6 variants, rename the affected variable to the IPv4
version first to avoid some renames in later commits.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
__napi_schedule_irqoff() is an optimized version of __napi_schedule()
which can be used where it is known that interrupts are disabled,
e.g. in interrupt-handlers, spin_lock_irq() sections or hrtimer
callbacks.
On PREEMPT_RT enabled kernels this assumptions is not true. Force-
threaded interrupt handlers and spinlocks are not disabling interrupts
and the NAPI hrtimer callback is forced into softirq context which runs
with interrupts enabled as well.
Chasing all usage sites of __napi_schedule_irqoff() is a whack-a-mole
game so make __napi_schedule_irqoff() invoke __napi_schedule() for
PREEMPT_RT kernels.
The callers of ____napi_schedule() in the networking core have been
audited and are correct on PREEMPT_RT kernels as well.
Reported-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the alx driver, all locking depended on the RTNL, but
that causes issues with ipconfig ("ip=..." command line)
because that waits for the netdev to have a carrier while
holding the RTNL, but the alx workers etc. require RTNL,
so the carrier won't be set until the RTNL is dropped and
can be acquired by alx workers. This causes long delays
at boot, as reported by Nikolai Zhubr.
Really the only sensible thing to do here is to not use
the RTNL for everything, but instead have fine-grained
locking for just the driver. Do that, it's not that hard.
Reported-by: Nikolai Zhubr <zhubr.2@gmail.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Even though the taprio qdisc is designed for multiqueue devices, all the
queues still point to the same top-level taprio qdisc. This works and is
probably required for software taprio, but at least with offload taprio,
it has an undesirable side effect: because the whole qdisc is run when a
packet has to be sent, it allows packets in a best-effort class to be
processed in the context of a task sending higher priority traffic. If
there are packets left in the qdisc after that first run, the NET_TX
softirq is raised and gets executed immediately in the same process
context. As with any other softirq, it runs up to 10 times and for up to
2ms, during which the calling process is waiting for the sendmsg call (or
similar) to return. In my use case, that calling process is a real-time
task scheduled to send a packet every 2ms, so the long sendmsg calls are
leading to missed timeslots.
By attaching each netdev queue to its own qdisc, as it is done with
the "classic" mq qdisc, each traffic class can be processed independently
without touching the other classes. A high-priority process can then send
packets without getting stuck in the sendmsg call anymore.
Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In function tls_sw_splice_read, before call tls_sw_advance_skb
it checks likely(!(flags & MSG_PEEK)), while MSG_PEEK is used
for recvmsg, splice supports SPLICE_F_NONBLOCK, SPLICE_F_MOVE,
SPLICE_F_MORE, should remove this checking.
Signed-off-by: Jim Ma <majinjing3@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The rcu_head pointer passed to taprio_free_sched_cb is never NULL.
That means that the result of container_of() operations on it is also
never NULL, even though rcu_head is the first element of the structure
embedding it. On top of that, it is misleading to perform a NULL check
on the result of container_of() because the position of the contained
element could change, which would make the check invalid. Remove the
unnecessary NULL check.
This change was made automatically with the following Coccinelle script.
@@
type t;
identifier v;
statement s;
@@
<+...
(
t v = container_of(...);
|
v = container_of(...);
)
...
when != v
- if (\( !v \| v == NULL \) ) s
...+>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The WWAN framework provides a unified way to handle WWAN/modems and its
control port(s). It has initially been introduced to support MHI/PCI
modems, offering the same control protocols as the USB variants such as
MBIM, QMI, AT... The WWAN framework exposes these control protocols as
character devices, similarly to cdc-wdm, but in a bus agnostic fashion.
This change adds registration of the USB modem cdc-wdm control endpoints
to the WWAN framework as standard control ports (wwanXpY...).
Exposing cdc-wdm through WWAN framework normally maintains backward
compatibility, e.g:
$ qmicli --device-open-qmi -d /dev/wwan0p1QMI --dms-get-ids
instead of
$ qmicli --device-open-qmi -d /dev/cdc-wdm0 --dms-get-ids
However, some tools may rely on cdc-wdm driver/device name for device
detection. It is then safer to keep the 'legacy' cdc-wdm character
device to prevent any breakage. This is handled in this change by
API mutual exclusion, only one access method can be used at a time,
either cdc-wdm chardev or WWAN API.
Note that unknown channel types (other than MBIM, AT or MBIM) are not
registered to the WWAN framework.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some devices may have ports with unknown type/protocol which need to
be tagged (though not supported by WWAN core). This will be the case
for cdc-wdm based drivers.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
