Add VMADDR_FLAG_TO_HOST vsock flag that is used to setup a vsock
connection where all the packets are forwarded to the host.
Then, using this type of vsock channel, vsock communication between
sibling VMs can be built on top of it.
Changelog
v3 -> v4
* Update the "VMADDR_FLAG_TO_HOST" value, as the size of the field has
been updated to 1 byte.
v2 -> v3
* Update comments to mention when the flag is set in the connect and
listen paths.
v1 -> v2
* New patch in v2, it was split from the first patch in the series.
* Remove the default value for the vsock flags field.
* Update the naming for the vsock flag to "VMADDR_FLAG_TO_HOST".
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vsock enables communication between virtual machines and the host they
are running on. With the multi transport support (guest->host and
host->guest), nested VMs can also use vsock channels for communication.
In addition to this, by default, all the vsock packets are forwarded to
the host, if no host->guest transport is loaded. This behavior can be
implicitly used for enabling vsock communication between sibling VMs.
Add a flags field in the vsock address data structure that can be used
to explicitly mark the vsock connection as being targeted for a certain
type of communication. This way, can distinguish between different use
cases such as nested VMs and sibling VMs.
This field can be set when initializing the vsock address variable used
for the connect() call.
Changelog
v3 -> v4
* Update the size of "svm_flags" field to be 1 byte instead of 2 bytes.
v2 -> v3
* Add "svm_flags" as a new field, not reusing "svm_reserved1".
v1 -> v2
* Update the field name to "svm_flags".
* Split the current patch in 2 patches.
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With NETIF_F_HW_TLS_TX packets are encrypted in HW. This cannot be
logically done when HW_CSUM offload is off.
Fixes: 2342a8512a ("net: Add TLS TX offload features")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Link: https://lore.kernel.org/r/20201213143929.26253-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are cases where a fastopen SYN may trigger either a ICMP_TOOBIG
message in the case of IPv6 or a fragmentation request in the case of
IPv4. This results in the socket stalling for a second or more as it does
not respond to the message by retransmitting the SYN frame.
Normally a SYN frame should not be able to trigger a ICMP_TOOBIG or
ICMP_FRAG_NEEDED however in the case of fastopen we can have a frame that
makes use of the entire MSS. In the case of fastopen it does, and an
additional complication is that the retransmit queue doesn't contain the
original frames. As a result when tcp_simple_retransmit is called and
walks the list of frames in the queue it may not mark the frames as lost
because both the SYN and the data packet each individually are smaller than
the MSS size after the adjustment. This results in the socket being stalled
until the retransmit timer kicks in and forces the SYN frame out again
without the data attached.
In order to resolve this we can reduce the MSS the packets are compared
to in tcp_simple_retransmit to -1 for cases where we are still in the
TCP_SYN_SENT state for a fastopen socket. Doing this we will mark all of
the packets related to the fastopen SYN as lost.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Link: https://lore.kernel.org/r/160780498125.3272.15437756269539236825.stgit@localhost.localdomain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently ocelot_set_rx_mode calls ocelot_mact_learn directly, which has
a very nice ocelot_mact_wait_for_completion at the end. Introduced in
commit 639c1b2625 ("net: mscc: ocelot: Register poll timeout should be
wall time not attempts"), this function uses readx_poll_timeout which
triggers a lot of lockdep warnings and is also dangerous to use from
atomic context, potentially leading to lockups and panics.
Steen Hegelund added a poll timeout of 100 ms for checking the MAC
table, a duration which is clearly absurd to poll in atomic context.
So we need to defer the MAC table access to process context, which we do
via a dynamically allocated workqueue which contains all there is to
know about the MAC table operation it has to do.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20201212191612.222019-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
add the code to release the nfc firmware when the firmware image size is
wrong.
Fixes: c04c674fad ("nfc: s3fwrn5: Add driver for Samsung S3FWRN5 NFC Chip")
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201213095850.28169-1-bongsu.jeon@samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This code is copying strings in 64 bit quantities, the device
returns them in big endian. As long as we store in big endian
IOW endian on both sides matches, we're good, so swap to_be64,
not from be64.
This fixes ~60 sparse warnings.
Link: https://lore.kernel.org/r/20201212234426.177015-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAl/XZ40THG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqVH5CACZGHhJFZfFCosQVz0vWPdAlOFlaXX6
MnUL1/cNPUYrLCPUducvM7xGdziD7pp2xQS5hvM2Gt0xU6hT2QRM3g7yWLOvpJU0
ewwbWvP2KbaR/DW8deV16Y8kQvxHjcOBgJLkHuAprbohHe8Slvj+9JknvNEVoNna
BP+zLTKuU0cC3uajcC5UfIffXUR9t7wl0Jmams0lE/toC62lO2qozMwsVo1BiXhS
YmD0oY4/0f02m8bpTfOGSSRrifVa1fbgMv+Bbuiqokj9HEH/YXs8zeibSl4qNZ45
sbYrawCZd5KgafnpSAwnHdy3B6b6qKqLxQRa+DXgM4xzxsUOn2iFUXbb
=ma2Z
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-5.11-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2020-12-14
All 7 patches are by me and target the m_can driver. First there are 4 cleanup
patches (fix link to doc, fix coding style, uniform variable name usage, mark
function as static). Then the driver is converted to
pm_runtime_resume_and_get(). The next patch lets the m_can class driver
allocate the driver's private data, to get rid of one level of indirection. And
the last patch consistently uses struct m_can_classdev as drvdata over all
binding drivers.
* tag 'linux-can-next-for-5.11-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: m_can: use struct m_can_classdev as drvdata
can: m_can: let m_can_class_allocate_dev() allocate driver specific private data
can: m_can: m_can_clk_start(): make use of pm_runtime_resume_and_get()
can: m_can: m_can_config_endisable(): mark as static
can: m_can: use cdev as name for struct m_can_classdev uniformly
can: m_can: convert indention to kernel coding style
can: m_can: update link to M_CAN user manual
====================
Link: https://lore.kernel.org/r/20201214133145.442472-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel says:
====================
mlxsw: Introduce initial XM router support
This patch set implements initial eXtended Mezzanine (XM) router
support.
The XM is an external device connected to the Spectrum-{2,3} ASICs using
dedicated Ethernet ports. Its purpose is to increase the number of
routes that can be offloaded to hardware. This is achieved by having the
ASIC act as a cache that refers cache misses to the XM where the FIB is
stored and LPM lookup is performed.
Future patch sets will add more sophisticated cache flushing and
selftests that utilize cache counters on the ASIC, which we plan to
expose via devlink-metric [1].
Patch set overview:
Patches #1-#2 add registers to insert/remove routes to/from the XM and
to enable/disable it. Patch #3 utilizes these registers in order to
implement XM-specific router low-level operations.
Patches #4-#5 query from firmware the availability of the XM and the
local ports that are used to connect the ASIC to the XM, so that netdevs
will not be created for them.
Patches #6-#8 initialize the XM by configuring its cache parameters.
Patch #9-#10 implement cache management, so that LPM lookup will be
correctly cached in the ASIC.
Patches #11-#13 implement cache flushing, so that routes
insertions/removals to/from the XM will flush the affected entries in
the cache.
Patch #14 configures the ASIC to allocate half of its memory for the
cache, so that room will be left for other entries (e.g., FDBs,
neighbours).
Patch #15 starts using the XM for IPv4 route offload, when available.
[1] https://lore.kernel.org/netdev/20200817125059.193242-1-idosch@idosch.org/
====================
Link: https://lore.kernel.org/r/20201214113041.2789043-1-idosch@idosch.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case the eXtended mezzanine is present on the system, use it for IPv4
router offload.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set a profile option to instruct FW to use 1/2 of KVH for XLT cache, not
the whole one.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Upon route insertion and removal, it is needed to flush possibly cached
entries from the XM cache. Extend XM op context to carry information
needed for the flush. Implement the flush in delayed work since for HW
design reasons there is a need to wait 50usec before the flush can be
done. If during this time comes the same flush request, consolidate it
to the first one. Implement this queued flushes by a hashtable.
v2:
* Fix GENMASK() high bit
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RLPMCE allows disabling the LPM cache. Can be changed on the fly.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RLCMLD register is used to bulk delete the XLT-LPM cache ML entries.
This can be used by SW when L is increased or decreased, thus need to
remove entries with old ML values.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a table that assigns L-value per M-index. The L is always the
biggest from the currently inserted prefixes. Setup a hashtable to track
the M-index information and the prefixes that are related to it. Ensure
the L-value is always correctly set.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The XRMT configures the M-Table for the XLT-LPM.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During the router init flow, call into XM code and initialize couple of
items needed for XM functionality:
1) Query the capabilities and sizes. Check the XM device id.
2) Initialize the M-value. Note that currently the M-value is set fixed
to 16 for IPv4. In future this may change to better cover the actual
inserted routes.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The XLTQ is used to query HW for XM-related info.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RXLTM configures and selects the M for the XM lookups.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the info stored in the bus_info struct about the eXtended mezanine
connected ports and don't expose them.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The output of boardinfo command was extended to contain information
about XM. Indicates if is present and in case it is, tells which
localports are used for the connection. So parse this info and store it
in bus_info passed up to the driver.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to offload entries to XM, implement a set of low-level
functions to work with LPM trees in XM and also to pack and write
FIB entries into XM.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RXLTE enables XLT (eXtended Lookup Table) LPM lookups if a capable
XM is present on the system.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The XMDR allows direct access to the XM device via the switch.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Simplification and distangling of the MSI related functionality
- Let IO/APIC construct the RTE entries from an MSI message instead of
having IO/APIC specific code in the interrupt remapping drivers
- Make the retrieval of the parent interrupt domain (vector or remap
unit) less hardcoded and use the relevant irqdomain callbacks for
selection.
- Allow the handling of more than 255 CPUs without a virtualized IOMMU
when the hypervisor supports it. This has made been possible by the
above modifications and also simplifies the existing workaround in the
HyperV specific virtual IOMMU.
- Cleanup of the historical timer_works() irq flags related
inconsistencies.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl/Xxd8THHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoYpOD/9C5TppNlPMUyx2SflH6bxt37pJEpln
+hYTKsk+jSThntr5mfj+GifGvgmHOVBTGnlDUnUnrpN7TQmLFBzwTOtnBLW53AO2
16/u0+Xci4LNCtEkaymf0Rq4MfsfriXHPJr0A/CnZ0tpHSf5QKHAiitSiGujdMlb
gbq43+zXd+jNkH7vkOLPX/7dZVI1hNASQEevJu2tRR4xYTuXFdBxvLgYkHtYKKrK
R1sbs6nI6yIzye2u4m4xGu29SxgUft+zdUf+UehJKM3yFmf51d9qpkX+kLaTWuaL
VPsMItbn0kdvxwXQWO6DYnIAAnVKCklyHQJTZCoNq9Fe91OoByak1CEVspSOa1av
JmycNSch4IYWasR4vVCB1gbb+V9SejcKu5SV3CDrEDqwkOIpfiqpriUXSCJTLlFd
QOEDOLuuk/79Qs//J/tb/nJ4IuKv8WPudDfIlMro8wUsAr67DjD4mnXprZ+svwWx
Ct/0/Memk+BSa0cw6pvg24BUZGN6zrufkBu2HKT9GOXRUdNkdLkiPhT8mK4T/O0l
f90QCLjPSOJ/K/pLEWdUHEPmgC5Q9RsXOmwVGqX+RbjfP7mYTJXlmWnBb+cFNch0
xFIH3SxVGylxxT06NX3SkvinrHj10CoAlmneefBlLtx6dF+2P84DAMZSF0OFToVI
c2KMg5zoesI4bg==
=8Gfs
-----END PGP SIGNATURE-----
Merge tag 'x86-apic-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic updates from Thomas Gleixner:
"Yet another large set of x86 interrupt management updates:
- Simplification and distangling of the MSI related functionality
- Let IO/APIC construct the RTE entries from an MSI message instead
of having IO/APIC specific code in the interrupt remapping drivers
- Make the retrieval of the parent interrupt domain (vector or remap
unit) less hardcoded and use the relevant irqdomain callbacks for
selection.
- Allow the handling of more than 255 CPUs without a virtualized
IOMMU when the hypervisor supports it. This has made been possible
by the above modifications and also simplifies the existing
workaround in the HyperV specific virtual IOMMU.
- Cleanup of the historical timer_works() irq flags related
inconsistencies"
* tag 'x86-apic-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/ioapic: Cleanup the timer_works() irqflags mess
iommu/hyper-v: Remove I/O-APIC ID check from hyperv_irq_remapping_select()
iommu/amd: Fix IOMMU interrupt generation in X2APIC mode
iommu/amd: Don't register interrupt remapping irqdomain when IR is disabled
iommu/amd: Fix union of bitfields in intcapxt support
x86/ioapic: Correct the PCI/ISA trigger type selection
x86/ioapic: Use I/O-APIC ID for finding irqdomain, not index
x86/hyperv: Enable 15-bit APIC ID if the hypervisor supports it
x86/kvm: Enable 15-bit extension when KVM_FEATURE_MSI_EXT_DEST_ID detected
iommu/hyper-v: Disable IRQ pseudo-remapping if 15 bit APIC IDs are available
x86/apic: Support 15 bits of APIC ID in MSI where available
x86/ioapic: Handle Extended Destination ID field in RTE
iommu/vt-d: Simplify intel_irq_remapping_select()
x86: Kill all traces of irq_remapping_get_irq_domain()
x86/ioapic: Use irq_find_matching_fwspec() to find remapping irqdomain
x86/hpet: Use irq_find_matching_fwspec() to find remapping irqdomain
iommu/hyper-v: Implement select() method on remapping irqdomain
iommu/vt-d: Implement select() method on remapping irqdomain
iommu/amd: Implement select() method on remapping irqdomain
x86/apic: Add select() method on vector irqdomain
...
Michael Chan says:
====================
bnxt_en: Improve firmware flashing.
This patchset improves firmware flashing in 2 ways:
- If firmware returns NO_SPACE error during flashing, the driver will
create the UPDATE directory with more staging area and retry.
- Instead of allocating a big DMA buffer for the entire contents of
the firmware package size, fallback to a smaller buffer to DMA the
contents in multiple DMA operations.
====================
Link: https://lore.kernel.org/r/1607860306-17244-1-git-send-email-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current scheme allocates a DMA buffer as big as the requested
firmware package file and DMAs the contents to firmware in one
operation. The buffer size can be several hundred kilo bytes and
the driver may not be able to allocate the memory. This will cause
firmware upgrade to fail.
Improve the scheme by using smaller DMA blocks and calling firmware to
DMA each block in a batch mode. Older firmware can cause excessive
NVRAM erases if the block size is too small so we try to allocate a
256K buffer to begin with and size it down successively if we cannot
allocate the memory.
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In bnxt_flash_package_from_fw_obj(), if firmware returns the NO_SPACE
error, call __bnxt_flash_nvram() to create the UPDATE directory and
then loop back and retry one more time.
Since the first try may fail, we use the silent version to send the
firmware commands.
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On NICs with a smaller NVRAM, FW installation may fail after multiple
updates due to fragmentation. The driver can retry when FW returns
a special error code. To faciliate the retry, we restructure the
logic that performs the flashing in a loop. The actual retry logic
will be added in the next patch.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This function will be modified in the next patch to retry flashing
the firmware in a loop. To facilate that, we rearrange the code so
that the steps that only need to be done once before the loop will be
moved to the top of the function.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor bnxt_flash_nvram() into __bnxt_flash_nvram() that takes an
additional dir_item_len parameter. The new function will be used
in subsequent patches with the dir_item_len parameter set to create
the UPDATE directory during flashing.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Simplify the FPU protection for !RT kernels
- Add the RT variant of FPU protections
-----BEGIN PGP SIGNATURE-----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=bgdQ
-----END PGP SIGNATURE-----
Merge tag 'x86-fpu-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 FPU updates from Thomas Gleixner:
- Simplify the FPU protection for !RT kernels
- Add the RT variant of FPU protections
* tag 'x86-fpu-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Make kernel FPU protection RT friendly
x86/fpu: Simplify fpregs_[un]lock()
Since its creation Marvell NIC driver for Armada 375/7k8k and
CN913x SoC families mvpp2 has been lacking an entry in MAINTAINERS,
which sometimes lead to unhandled bugs that persisted
across several kernel releases.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201211165114.26290-1-mw@semihalf.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reproduces BUG_ON in skb_checksum_help():
tun creates (bogus) skb with huge partial-checksummed area and
small ip packet inside. Then ip_rcv trims the skb based on size
of internal ip packet, after that csum offset points beyond of
trimmed skb. Then checksum_tg() called via netfilter hook
triggers BUG_ON:
offset = skb_checksum_start_offset(skb);
BUG_ON(offset >= skb_headlen(skb));
To work around the problem this patch forces pskb_trim_rcsum_slow()
to return -EINVAL in described scenario. It allows its callers to
drop such kind of packets.
Link: https://syzkaller.appspot.com/bug?id=b419a5ca95062664fe1a60b764621eb4526e2cd0
Reported-by: syzbot+7010af67ced6105e5ab6@syzkaller.appspotmail.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/1b2494af-2c56-8ee2-7bc0-923fcad1cdf8@virtuozzo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub pointed out that the IP_ECN_set* helpers basically open-code
csum16_add(), so let's switch them over to using the helper instead.
v2:
- Use __be16 for check_add stack variable in IP_ECN_set_ce() (kbot)
v3:
- Turns out we need __force casts to do arithmetic on __be16 types
Reported-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Jonathan Morton <chromatix99@gmail.com>
Tested-by: Pete Heist <pete@heistp.net>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20201211142638.154780-1-toke@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Consolidate all kmap_atomic() internals into a generic implementation
which builds the base for the kmap_local() API and make the
kmap_atomic() interface wrappers which handle the disabling/enabling of
preemption and pagefaults.
- Switch the storage from per-CPU to per task and provide scheduler
support for clearing mapping when scheduling out and restoring them
when scheduling back in.
- Merge the migrate_disable/enable() code, which is also part of the
scheduler pull request. This was required to make the kmap_local()
interface available which does not disable preemption when a mapping
is established. It has to disable migration instead to guarantee that
the virtual address of the mapped slot is the same accross preemption.
- Provide better debug facilities: guard pages and enforced utilization
of the mapping mechanics on 64bit systems when the architecture allows
it.
- Provide the new kmap_local() API which can now be used to cleanup the
kmap_atomic() usage sites all over the place. Most of the usage sites
do not require the implicit disabling of preemption and pagefaults so
the penalty on 64bit and 32bit non-highmem systems is removed and quite
some of the code can be simplified. A wholesale conversion is not
possible because some usage depends on the implicit side effects and
some need to be cleaned up because they work around these side effects.
The migrate disable side effect is only effective on highmem systems
and when enforced debugging is enabled. On 64bit and 32bit non-highmem
systems the overhead is completely avoided.
-----BEGIN PGP SIGNATURE-----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=n71I
-----END PGP SIGNATURE-----
Merge tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull kmap updates from Thomas Gleixner:
"The new preemtible kmap_local() implementation:
- Consolidate all kmap_atomic() internals into a generic
implementation which builds the base for the kmap_local() API and
make the kmap_atomic() interface wrappers which handle the
disabling/enabling of preemption and pagefaults.
- Switch the storage from per-CPU to per task and provide scheduler
support for clearing mapping when scheduling out and restoring them
when scheduling back in.
- Merge the migrate_disable/enable() code, which is also part of the
scheduler pull request. This was required to make the kmap_local()
interface available which does not disable preemption when a
mapping is established. It has to disable migration instead to
guarantee that the virtual address of the mapped slot is the same
across preemption.
- Provide better debug facilities: guard pages and enforced
utilization of the mapping mechanics on 64bit systems when the
architecture allows it.
- Provide the new kmap_local() API which can now be used to cleanup
the kmap_atomic() usage sites all over the place. Most of the usage
sites do not require the implicit disabling of preemption and
pagefaults so the penalty on 64bit and 32bit non-highmem systems is
removed and quite some of the code can be simplified. A wholesale
conversion is not possible because some usage depends on the
implicit side effects and some need to be cleaned up because they
work around these side effects.
The migrate disable side effect is only effective on highmem
systems and when enforced debugging is enabled. On 64bit and 32bit
non-highmem systems the overhead is completely avoided"
* tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
ARM: highmem: Fix cache_is_vivt() reference
x86/crashdump/32: Simplify copy_oldmem_page()
io-mapping: Provide iomap_local variant
mm/highmem: Provide kmap_local*
sched: highmem: Store local kmaps in task struct
x86: Support kmap_local() forced debugging
mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP
mm/highmem: Provide and use CONFIG_DEBUG_KMAP_LOCAL
microblaze/mm/highmem: Add dropped #ifdef back
xtensa/mm/highmem: Make generic kmap_atomic() work correctly
mm/highmem: Take kmap_high_get() properly into account
highmem: High implementation details and document API
Documentation/io-mapping: Remove outdated blurb
io-mapping: Cleanup atomic iomap
mm/highmem: Remove the old kmap_atomic cruft
highmem: Get rid of kmap_types.h
xtensa/mm/highmem: Switch to generic kmap atomic
sparc/mm/highmem: Switch to generic kmap atomic
powerpc/mm/highmem: Switch to generic kmap atomic
nds32/mm/highmem: Switch to generic kmap atomic
...
- migrate_disable/enable() support which originates from the RT tree and
is now a prerequisite for the new preemptible kmap_local() API which aims
to replace kmap_atomic().
- A fair amount of topology and NUMA related improvements
- Improvements for the frequency invariant calculations
- Enhanced robustness for the global CPU priority tracking and decision
making
- The usual small fixes and enhancements all over the place
-----BEGIN PGP SIGNATURE-----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=Oz1V
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Thomas Gleixner:
- migrate_disable/enable() support which originates from the RT tree
and is now a prerequisite for the new preemptible kmap_local() API
which aims to replace kmap_atomic().
- A fair amount of topology and NUMA related improvements
- Improvements for the frequency invariant calculations
- Enhanced robustness for the global CPU priority tracking and decision
making
- The usual small fixes and enhancements all over the place
* tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits)
sched/fair: Trivial correction of the newidle_balance() comment
sched/fair: Clear SMT siblings after determining the core is not idle
sched: Fix kernel-doc markup
x86: Print ratio freq_max/freq_base used in frequency invariance calculations
x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC
x86, sched: Calculate frequency invariance for AMD systems
irq_work: Optimize irq_work_single()
smp: Cleanup smp_call_function*()
irq_work: Cleanup
sched: Limit the amount of NUMA imbalance that can exist at fork time
sched/numa: Allow a floating imbalance between NUMA nodes
sched: Avoid unnecessary calculation of load imbalance at clone time
sched/numa: Rename nr_running and break out the magic number
sched: Make migrate_disable/enable() independent of RT
sched/topology: Condition EAS enablement on FIE support
arm64: Rebuild sched domains on invariance status changes
sched/topology,schedutil: Wrap sched domains rebuild
sched/uclamp: Allow to reset a task uclamp constraint value
sched/core: Fix typos in comments
Documentation: scheduler: fix information on arch SD flags, sched_domain and sched_debug
...
I got a warining report:
br_sysfs_addbr: can't create group bridge4/bridge
------------[ cut here ]------------
sysfs group 'bridge' not found for kobject 'bridge4'
WARNING: CPU: 2 PID: 9004 at fs/sysfs/group.c:279 sysfs_remove_group fs/sysfs/group.c:279 [inline]
WARNING: CPU: 2 PID: 9004 at fs/sysfs/group.c:279 sysfs_remove_group+0x153/0x1b0 fs/sysfs/group.c:270
Modules linked in: iptable_nat
...
Call Trace:
br_dev_delete+0x112/0x190 net/bridge/br_if.c:384
br_dev_newlink net/bridge/br_netlink.c:1381 [inline]
br_dev_newlink+0xdb/0x100 net/bridge/br_netlink.c:1362
__rtnl_newlink+0xe11/0x13f0 net/core/rtnetlink.c:3441
rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3500
rtnetlink_rcv_msg+0x385/0x980 net/core/rtnetlink.c:5562
netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2494
netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1330
netlink_sendmsg+0x793/0xc80 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg+0x139/0x170 net/socket.c:671
____sys_sendmsg+0x658/0x7d0 net/socket.c:2353
___sys_sendmsg+0xf8/0x170 net/socket.c:2407
__sys_sendmsg+0xd3/0x190 net/socket.c:2440
do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
In br_device_event(), if the bridge sysfs fails to be added,
br_device_event() should return error. This can prevent warining
when removing bridge sysfs that do not exist.
Fixes: bb900b27a2 ("bridge: allow creating bridge devices with netlink")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Tested-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20201211122921.40386-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Core:
- Robustness improvements for the NOHZ tick management
- Fixes and consolidation of the NTP/RTC synchronization code
- Small fixes and improvements in various places
- A set of function documentation udpates and fixes
Drivers:
- Cleanups and improvements in various clocksoure/event drivers
- Removal of the EZChip NPS clocksource driver as the platfrom support
was removed from ARC
- The usual set of new device tree binding and json conversions
- The RTC driver which have been acked by the RTC maintainer:
- Fix a long standing bug in the MC146818 library code which can cause
reading garbage during the RTC internal update.
- The changes related to the NTP/RTC consolidation work.
-----BEGIN PGP SIGNATURE-----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=eWC0
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timers and timekeeping updates from Thomas Gleixner:
"Core:
- Robustness improvements for the NOHZ tick management
- Fixes and consolidation of the NTP/RTC synchronization code
- Small fixes and improvements in various places
- A set of function documentation udpates and fixes
Drivers:
- Cleanups and improvements in various clocksoure/event drivers
- Removal of the EZChip NPS clocksource driver as the platfrom
support was removed from ARC
- The usual set of new device tree binding and json conversions
- The RTC driver which have been acked by the RTC maintainer:
* fix a long standing bug in the MC146818 library code which can
cause reading garbage during the RTC internal update.
* changes related to the NTP/RTC consolidation work"
* tag 'timers-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
ntp: Fix prototype in the !CONFIG_GENERIC_CMOS_UPDATE case
tick/sched: Make jiffies update quick check more robust
ntp: Consolidate the RTC update implementation
ntp: Make the RTC sync offset less obscure
ntp, rtc: Move rtc_set_ntp_time() to ntp code
ntp: Make the RTC synchronization more reliable
rtc: core: Make the sync offset default more realistic
rtc: cmos: Make rtc_cmos sync offset correct
rtc: mc146818: Reduce spinlock section in mc146818_set_time()
rtc: mc146818: Prevent reading garbage
clocksource/drivers/sh_cmt: Fix potential deadlock when calling runtime PM
clocksource/drivers/arm_arch_timer: Correct fault programming of CNTKCTL_EL1.EVNTI
clocksource/drivers/arm_arch_timer: Use stable count reader in erratum sne
clocksource/drivers/dw_apb_timer_of: Add error handling if no clock available
clocksource/drivers/riscv: Make RISCV_TIMER depends on RISCV_SBI
clocksource/drivers/ingenic: Fix section mismatch
clocksource/drivers/cadence_ttc: Fix memory leak in ttc_setup_clockevent()
dt-bindings: timer: renesas: tmu: Convert to json-schema
dt-bindings: timer: renesas: tmu: Document r8a774e1 bindings
clocksource/drivers/orion: Add missing clk_disable_unprepare() on error path
...
setup_kup() is used by both 64-bit and 32-bit code. However on 64-bit
it must not be __init, because it's used for CPU hotplug, whereas on
32-bit it should be __init because it calls setup_kuap/kuep() which
are __init.
We worked around that problem in the past by marking it __ref, see
commit 67d53f30e2 ("powerpc/mm: fix section mismatch for
setup_kup()").
Marking it __ref basically just omits it from section mismatch
checking, which can lead to bugs, and in fact it did, see commit
44b4c4450f ("powerpc/64s: Mark the kuap/kuep functions non __init")
We can avoid all these problems by just making it static inline.
Because all it does is call other functions, making it inline actually
shrinks the 32-bit vmlinux by ~76 bytes.
Make it __always_inline as pointed out by Christophe.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201214123011.311024-1-mpe@ellerman.id.au
Instead doing the check for allocation in each loop, move it outside
the while loop and do it every NAPI loop.
This change boosts the xdpsock rxdrop scenario with 15% more
packets-per-second.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/r/20201211085410.59350-1-bjorn.topel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
George Cherian says:
====================
Add devlink and devlink health reporters to octeontx2
Add basic devlink and devlink health reporters.
Devlink health reporters are added for NPA block.
Address Jakub's comment to add devlink support for error reporting.
https://www.spinics.net/lists/netdev/msg670712.html
For now, I have dropped the NIX block health reporters.
This series attempts to add health reporters only for the NPA block.
As per Jakub's suggestion separate reporters per event is used and also
got rid of the counters.
====================
Link: https://lore.kernel.org/r/20201211062526.2302643-1-george.cherian@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add Documentation for devlink health reporters for NPA block.
Signed-off-by: George Cherian <george.cherian@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add devlink support to AF driver. Basic devlink support is added.
Currently info_get is the only supported devlink ops.
devlink ouptput looks like this
# devlink dev
pci/0002:01:00.0
# devlink dev info
pci/0002:01:00.0:
driver octeontx2-af
#
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: George Cherian <george.cherian@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cleanup function in this script that tries to delete hv-1 / hv-2
vm-1 / vm-2 netns will generate some uncessary error messages:
Cannot remove namespace file "/run/netns/hv-2": No such file or directory
Cannot remove namespace file "/run/netns/vm-1": No such file or directory
Cannot remove namespace file "/run/netns/vm-2": No such file or directory
Redirect it to /dev/null like other commands in the cleanup function
to reduce confusion.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Link: https://lore.kernel.org/r/20201211042420.16411-1-po-hsu.lin@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For each TCP zero window probe, the icsk_backoff is increased by one and
its max value is tcp_retries2. If tcp_retries2 is greater than 63, the
probe0 timeout shift may exceed its max bits. On x86_64/ARMv8/MIPS, the
shift count would be masked to range 0 to 63. And on ARMv7 the result is
zero. If the shift count is masked, only several probes will be sent
with timeout shorter than TCP_RTO_MAX. But if the timeout is zero, it
needs tcp_retries2 times probes to end this false timeout. Besides,
bitwise shift greater than or equal to the width is an undefined
behavior.
This patch adds a limit to the backoff. The max value of max_when is
TCP_RTO_MAX and the min value of timeout base is TCP_RTO_MIN. The limit
is the backoff from TCP_RTO_MIN to TCP_RTO_MAX.
Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Link: https://lore.kernel.org/r/20201208091910.37618-1-cambda@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Core:
- Better handling of page table leaves on archictectures which have
architectures have non-pagetable aligned huge/large pages. For such
architectures a leaf can actually be part of a larger entry.
- Prevent a deadlock vs. exec_update_mutex
Architectures:
- The related updates for page size calculation of leaf entries
- The usual churn to support new CPUs
- Small fixes and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=rZ99
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Thomas Gleixner:
"Core:
- Better handling of page table leaves on archictectures which have
architectures have non-pagetable aligned huge/large pages. For such
architectures a leaf can actually be part of a larger entry.
- Prevent a deadlock vs exec_update_mutex
Architectures:
- The related updates for page size calculation of leaf entries
- The usual churn to support new CPUs
- Small fixes and improvements all over the place"
* tag 'perf-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
perf/x86/intel: Add Tremont Topdown support
uprobes/x86: Fix fall-through warnings for Clang
perf/x86: Fix fall-through warnings for Clang
kprobes/x86: Fix fall-through warnings for Clang
perf/x86/intel/lbr: Fix the return type of get_lbr_cycles()
perf/x86/intel: Fix rtm_abort_event encoding on Ice Lake
x86/kprobes: Restore BTF if the single-stepping is cancelled
perf: Break deadlock involving exec_update_mutex
sparc64/mm: Implement pXX_leaf_size() support
powerpc/8xx: Implement pXX_leaf_size() support
arm64/mm: Implement pXX_leaf_size() support
perf/core: Fix arch_perf_get_page_size()
mm: Introduce pXX_leaf_size()
mm/gup: Provide gup_get_pte() more generic
perf/x86/intel: Add event constraint for CYCLE_ACTIVITY.STALLS_MEM_ANY
perf/x86/intel/uncore: Add Rocket Lake support
perf/x86/msr: Add Rocket Lake CPU support
perf/x86/cstate: Add Rocket Lake CPU support
perf/x86/intel: Add Rocket Lake CPU support
perf,mm: Handle non-page-table-aligned hugetlbfs
...
