Before calling add_new_kprobe(), aggr_probe's GONE
flag and kprobe GONE flag are cleared. We don't need
to worry about that flag at this point.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naveen N . Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/153666118298.21306.4915366706875652652.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
All aggr_probes at this line are already disarmed by
disable_kprobe() or checked by kprobe_disarmed().
So this BUG_ON() is pointless, remove it.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naveen N . Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/153666115463.21306.8799008438116029806.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Added bpffs pretty print for program array map. For a particular
array index, if the program array points to a valid program,
the "<index>: <prog_id>" will be printed out like
0: 6
which means bpf program with id "6" is installed at index "0".
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There are no more users of SEND_SIG_FORCED so it may be safely removed.
Remove the definition of SEND_SIG_FORCED, it's use in is_si_special,
it's use in TP_STORE_SIGINFO, and it's use in __send_signal as without
any users the uses of SEND_SIG_FORCED are now unncessary.
This makes the code simpler, easier to understand and use. Users of
signal sending functions now no longer need to ask themselves do I
need to use SEND_SIG_FORCED.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Now that siginfo is never allocated for SIGKILL and SIGSTOP there is
no difference between SEND_SIG_PRIV and SEND_SIG_FORCED for SIGKILL
and SIGSTOP. This makes SEND_SIG_FORCED unnecessary and redundant in
the presence of SIGKILL and SIGSTOP. Therefore change users of
SEND_SIG_FORCED that are sending SIGKILL or SIGSTOP to use
SEND_SIG_PRIV instead.
This removes the last users of SEND_SIG_FORCED.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The SIGKILL and SIGSTOP signals are never delivered to userspace so
queued siginfo for these signals can never be observed. Therefore
remove the chance of failure by never even attempting to allocate
siginfo in those cases.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Today kernel threads never dequeue siginfo so it is pointless to
enqueue siginfo for them. The usb gadget mass storage driver goes
one farther and uses SEND_SIG_FORCED to guarantee that no siginfo is
even enqueued.
Generalize the optimization of the usb mass storage driver and never
perform an unnecessary allocation when delivering signals to kthreads.
Switch the mass storage driver from sending signals with
SEND_SIG_FORCED to SEND_SIG_PRIV. As using SEND_SIG_FORCED is now
unnecessary.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Instead of playing whack-a-mole and changing SEND_SIG_PRIV to
SEND_SIG_FORCED throughout the kernel to ensure a pid namespace init
gets signals sent by the kernel, stop allowing a pid namespace init to
ignore SIGKILL or SIGSTOP sent by the kernel. A pid namespace init is
only supposed to be able to ignore signals sent from itself and
children with SIG_DFL.
Fixes: 921cf9f630 ("signals: protect cinit from unblocked SIG_DFL signals")
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
For userspace to tell the difference between a random signal and an
exception, the exception must include siginfo information.
Using SEND_SIG_FORCED for SIGILL is thus wrong, and it will result
in userspace seeing si_code == SI_USER (like a random signal) instead
of si_code == SI_KERNEL or a more specific si_code as all exceptions
deliver.
Therefore replace force_sig_info(SIGILL, SEND_SIG_FORCE, current)
with force_sig(SIG_ILL, current) which gets this right and is
shorter and easier to type.
Fixes: 014940bad8 ("uprobes/x86: Send SIGILL if arch_uprobe_post_xol() fails")
Fixes: 0b5256c7f1 ("uprobes: Send SIGILL if handle_trampoline() fails")
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
If the first process started (aka /sbin/init) receives a SIGKILL it
will panic the system if it is delivered. Making the system unusable
and undebugable. It isn't much better if the first process started
receives SIGSTOP.
So always ignore SIGSTOP and SIGKILL sent to init.
This is done in a separate clause in sig_task_ignored as force_sig_info
can clear SIG_UNKILLABLE and this protection should work even then.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Anybody trying to assert the cpu_hotplug_lock is held (lockdep_assert_cpus_held())
from AP callbacks will fail, because the lock is held by the BP.
Stick in an explicit annotation in cpuhp_thread_fun() to make this work.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-tip-commits@vger.kernel.org
Fixes: cb538267ea ("jump_label/lockdep: Assert we hold the hotplug lock for _cpuslocked() operations")
Link: http://lkml.kernel.org/r/20180911095127.GT24082@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Export pm_power_off_prepare. It is needed to implement power off on
Freescale/NXP iMX6 based boards with external power management
integrated circuit (PMIC).
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 375899cddc.
The visibility of early messages did not longer take into account
"quiet", "debug", and "loglevel" early parameters.
It would be possible to invalidate and recompute LOG_NOCONS flag
for the affected messages. But it would be hairy.
Instead this patch just reverts the problematic commit. We could
come up with a better solution for the original problem. For example,
we could simplify the logic and just mark messages that should always
be visible or always invisible on the console.
Also this patch reverts the related build fix commit ffaa619af1
("printk: Fix warning about unused suppress_message_printing").
Finally, this patch does not put back the unused LOG_NOCONS flag.
Link: http://lkml.kernel.org/r/20180910145747.emvfzv4mzlk5dfqk@pathway.suse.cz
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Maninder Singh <maninder1.s@samsung.com>
Reported-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Merging v4.14.68 into v4.14-rt I tripped over a conflict in the
rtmutex.c code. There I found that we had:
#ifdef CONFIG_DEBUG_LOCK_ALLOC
[..]
#endif
#ifndef CONFIG_DEBUG_LOCK_ALLOC
[..]
#endif
Really this should be:
#ifdef CONFIG_DEBUG_LOCK_ALLOC
[..]
#else
[..]
#endif
This cleans up that logic.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Rosin <peda@axentia.se>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180910214638.55926030@vmware.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Both kallsyms_num_syms and kallsyms_markers[] don't really need to use
unsigned long as their (base) types; unsigned int fully suffices.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Fix the following warnings:
kernel/sched/topology.c:10:15: warning: symbol 'sched_domains_tmpmask' was not declared. Should it be static?
kernel/sched/topology.c:11:15: warning: symbol 'sched_domains_tmpmask2' was not declared. Should it be static?
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1533299852-26941-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Perf can record user stack data in response to a synchronous request, such
as a tracepoint firing. If this happens under set_fs(KERNEL_DS), then we
end up reading user stack data using __copy_from_user_inatomic() under
set_fs(KERNEL_DS). I think this conflicts with the intention of using
set_fs(KERNEL_DS). And it is explicitly forbidden by hardware on ARM64
when both CONFIG_ARM64_UAO and CONFIG_ARM64_PAN are used.
So fix this by forcing USER_DS when recording user stack data.
Signed-off-by: Yabin Cui <yabinc@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 88b0193d94 ("perf/callchain: Force USER_DS when invoking perf_callchain_user()")
Link: http://lkml.kernel.org/r/20180823225935.27035-1-yabinc@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Trivial fix to spelling mistake in pr_err() error message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/20180824112235.8842-1-colin.king@canonical.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit:
c3bc8fd637 ("tracing: Centralize preemptirq tracepoints and unify their usage")
added the inclusion of <trace/events/preemptirq.h>.
liblockdep doesn't have a stub version of that header so now fails to build.
However, commit:
bff1b208a5 ("tracing: Partial revert of "tracing: Centralize preemptirq tracepoints and unify their usage"")
removed the use of functions declared in that header. So delete the #include.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <alexander.levin@verizon.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Fixes: bff1b208a5 ("tracing: Partial revert of "tracing: Centralize ...")
Fixes: c3bc8fd637 ("tracing: Centralize preemptirq tracepoints ...")
Link: http://lkml.kernel.org/r/20180828203315.GD18030@decadent.org.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For debug purposes it would be nice to see which tasks
caused a suspend abort, i.e. which tasks were still
in the process of freezing when a wakeup event occurred.
This patch adds the info to pm_debug_messages.
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, when a reader acquires a lock, it only sets the
RWSEM_READER_OWNED bit in the owner field. The other bits are simply
not used. When debugging hanging cases involving rwsems and readers,
the owner value does not provide much useful information at all.
This patch modifies the current behavior to always store the task_struct
pointer of the last rwsem-acquiring reader in a reader-owned rwsem. This
may be useful in debugging rwsem hanging cases especially if only one
reader is involved. However, the task in the owner field may not the
real owner or one of the real owners at all when the owner value is
examined, for example, in a crash dump. So it is just an additional
hint about the past history.
If CONFIG_DEBUG_RWSEMS=y is enabled, the owner field will be checked at
unlock time too to make sure the task pointer value is valid. That does
have a slight performance cost and so is only enabled as part of that
debug option.
From the performance point of view, it is expected that the changes
shouldn't have any noticeable performance impact. A rwsem microbenchmark
(with 48 worker threads and 1:1 reader/writer ratio) was ran on a
2-socket 24-core 48-thread Haswell system. The locking rates on a
4.19-rc1 based kernel were as follows:
1) Unpatched kernel: 543.3 kops/s
2) Patched kernel: 549.2 kops/s
3) Patched kernel (CONFIG_DEBUG_RWSEMS on): 546.6 kops/s
There was actually a slight increase in performance (1.1%) in this
particular case. Maybe it was caused by the elimination of a branch or
just a testing noise. Turning on the CONFIG_DEBUG_RWSEMS option also
had less than the expected impact on performance.
The least significant 2 bits of the owner value are now used to designate
the rwsem is readers owned and the owners are anonymous.
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1536265114-10842-1-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
nr_running in struct numa_stats is not used anywhere in the code.
Remove it.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1535548752-4434-3-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With:
commit 2d4056fafa ("sched/numa: Remove numa_has_capacity()")
the local variables 'smt', 'cpus' and 'capacity' and their results are not used
anymore in numa_has_capacity()
Remove this unused code.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1535548752-4434-2-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
LLVM has a warning that tags expressions like:
if (foo && non-bool-const)
This pattern triggers for CONFIG_SCHED_DEBUG=n where sched_feat() ends
up being whatever bit we select. Avoid the warning with an explicit
cast to bool.
Reported-by: Philipp Klocke <philipp97kl@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The 'prefer sibling' sched_domain flag is intended to encourage
spreading tasks to sibling sched_domain to take advantage of more caches
and core for SMT systems. It has recently been changed to be on all
non-NUMA topology level. However, spreading across domains with CPU
capacity asymmetry isn't desirable, e.g. spreading from high capacity to
low capacity CPUs even if high capacity CPUs aren't overutilized might
give access to more cache but the CPU will be slower and possibly lead
to worse overall throughput.
To prevent this, we need to remove SD_PREFER_SIBLING on the sched_domain
level immediately below SD_ASYM_CPUCAPACITY.
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: gaku.inami.xh@renesas.com
Cc: valentin.schneider@arm.com
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/1530699470-29808-13-git-send-email-morten.rasmussen@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When lower capacity CPUs are load balancing and considering to pull
something from a higher capacity group, we should not pull tasks from a
CPU with only one task running as this is guaranteed to impede progress
for that task. If there is more than one task running, load balance in
the higher capacity group would have already made any possible moves to
resolve imbalance and we should make better use of system compute
capacity by moving a task if we still have more than one running.
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: gaku.inami.xh@renesas.com
Cc: valentin.schneider@arm.com
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/1530699470-29808-11-git-send-email-morten.rasmussen@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Idle balance is a great opportunity to pull a misfit task. However,
there are scenarios where misfit tasks are present but idle balance is
prevented by the overload flag.
A good example of this is a workload of n identical tasks. Let's suppose
we have a 2+2 Arm big.LITTLE system. We then spawn 4 fairly
CPU-intensive tasks - for the sake of simplicity let's say they are just
CPU hogs, even when running on big CPUs.
They are identical tasks, so on an SMP system they should all end at
(roughly) the same time. However, in our case the LITTLE CPUs are less
performing than the big CPUs, so tasks running on the LITTLEs will have
a longer completion time.
This means that the big CPUs will complete their work earlier, at which
point they should pull the tasks from the LITTLEs. What we want to
happen is summarized as follows:
a,b,c,d are our CPU-hogging tasks _ signifies idling
LITTLE_0 | a a a a _ _
LITTLE_1 | b b b b _ _
---------|-------------
big_0 | c c c c a a
big_1 | d d d d b b
^
^
Tasks end on the big CPUs, idle balance happens
and the misfit tasks are pulled straight away
This however won't happen, because currently the overload flag is only
set when there is any CPU that has more than one runnable task - which
may very well not be the case here if our CPU-hogging workload is all
there is to run.
As such, this commit sets the overload flag in update_sg_lb_stats when
a group is flagged as having a misfit task.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: gaku.inami.xh@renesas.com
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/1530699470-29808-10-git-send-email-morten.rasmussen@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This variable can be read and set locklessly within update_sd_lb_stats().
As such, READ/WRITE_ONCE() are added to make sure nothing terribly wrong
can happen because of the compiler.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: gaku.inami.xh@renesas.com
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/1530699470-29808-9-git-send-email-morten.rasmussen@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
sizeof(_Bool) is implementation defined, so let's just go with 'int' as
is done for other structures e.g. sched_domain_shared->has_idle_cores.
The local 'overload' variable used in update_sd_lb_stats can remain
bool, as it won't impact any struct layout and can be assigned to the
root_domain field.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: gaku.inami.xh@renesas.com
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/1530699470-29808-8-git-send-email-morten.rasmussen@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This variable is entirely local to update_sd_lb_stats, so we can
safely change its type and slightly clean up its initialisation.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: gaku.inami.xh@renesas.com
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/1530699470-29808-7-git-send-email-morten.rasmussen@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There already are a few conditions in nohz_kick_needed() to ensure
a nohz kick is triggered, but they are not enough for some misfit
task scenarios. Excluding asym packing, those are:
- rq->nr_running >=2: Not relevant here because we are running a
misfit task, it needs to be migrated regardless and potentially through
active balance.
- sds->nr_busy_cpus > 1: If there is only the misfit task being run
on a group of low capacity CPUs, this will be evaluated to False.
- rq->cfs.h_nr_running >=1 && check_cpu_capacity(): Not relevant here,
misfit task needs to be migrated regardless of rt/IRQ pressure
As such, this commit adds an rq->misfit_task_load condition to trigger a
nohz kick.
The idea to kick a nohz balance for misfit tasks originally came from
Leo Yan <leo.yan@linaro.org>, and a similar patch was submitted for
the Android Common Kernel - see:
https://lists.linaro.org/pipermail/eas-dev/2016-September/000551.html
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: gaku.inami.xh@renesas.com
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/1530699470-29808-6-git-send-email-morten.rasmussen@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On asymmetric CPU capacity systems load intensive tasks can end up on
CPUs that don't suit their compute demand. In this scenarios 'misfit'
tasks should be migrated to CPUs with higher compute capacity to ensure
better throughput. group_misfit_task indicates this scenario, but tweaks
to the load-balance code are needed to make the migrations happen.
Misfit balancing only makes sense between a source group of lower
per-CPU capacity and destination group of higher compute capacity.
Otherwise, misfit balancing is ignored. group_misfit_task has lowest
priority so any imbalance due to overload is dealt with first.
The modifications are:
1. Only pick a group containing misfit tasks as the busiest group if the
destination group has higher capacity and has spare capacity.
2. When the busiest group is a 'misfit' group, skip the usual average
load and group capacity checks.
3. Set the imbalance for 'misfit' balancing sufficiently high for a task
to be pulled ignoring average load.
4. Pick the CPU with the highest misfit load as the source CPU.
5. If the misfit task is alone on the source CPU, go for active
balancing.
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: gaku.inami.xh@renesas.com
Cc: valentin.schneider@arm.com
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/1530699470-29808-5-git-send-email-morten.rasmussen@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The current sg->min_capacity tracks the lowest per-CPU compute capacity
available in the sched_group when rt/irq pressure is taken into account.
Minimum capacity isn't the ideal metric for tracking if a sched_group
needs offloading to another sched_group for some scenarios, e.g. a
sched_group with multiple CPUs if only one is under heavy pressure.
Tracking maximum capacity isn't perfect either but a better choice for
some situations as it indicates that the sched_group definitely compute
capacity constrained either due to rt/irq pressure on all CPUs or
asymmetric CPU capacities (e.g. big.LITTLE).
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: gaku.inami.xh@renesas.com
Cc: valentin.schneider@arm.com
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/1530699470-29808-4-git-send-email-morten.rasmussen@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
To maximize throughput in systems with asymmetric CPU capacities (e.g.
ARM big.LITTLE) load-balancing has to consider task and CPU utilization
as well as per-CPU compute capacity when load-balancing in addition to
the current average load based load-balancing policy. Tasks with high
utilization that are scheduled on a lower capacity CPU need to be
identified and migrated to a higher capacity CPU if possible to maximize
throughput.
To implement this additional policy an additional group_type
(load-balance scenario) is added: 'group_misfit_task'. This represents
scenarios where a sched_group has one or more tasks that are not
suitable for its per-CPU capacity. 'group_misfit_task' is only considered
if the system is not overloaded or imbalanced ('group_imbalanced' or
'group_overloaded').
Identifying misfit tasks requires the rq lock to be held. To avoid
taking remote rq locks to examine source sched_groups for misfit tasks,
each CPU is responsible for tracking misfit tasks themselves and update
the rq->misfit_task flag. This means checking task utilization when
tasks are scheduled and on sched_tick.
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: gaku.inami.xh@renesas.com
Cc: valentin.schneider@arm.com
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/1530699470-29808-3-git-send-email-morten.rasmussen@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The existing asymmetric CPU capacity code should cause minimal overhead
for others. Putting it behind a static_key, it has been done for SMT
optimizations, would make it easier to extend and improve without
causing harm to others moving forward.
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: gaku.inami.xh@renesas.com
Cc: valentin.schneider@arm.com
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/1530699470-29808-2-git-send-email-morten.rasmussen@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The SD_ASYM_CPUCAPACITY sched_domain flag is supposed to mark the
sched_domain in the hierarchy where all CPU capacities are visible for
any CPU's point of view on asymmetric CPU capacity systems. The
scheduler can then take to take capacity asymmetry into account when
balancing at this level. It also serves as an indicator for how wide
task placement heuristics have to search to consider all available CPU
capacities as asymmetric systems might often appear symmetric at
smallest level(s) of the sched_domain hierarchy.
The flag has been around for while but so far only been set by
out-of-tree code in Android kernels. One solution is to let each
architecture provide the flag through a custom sched_domain topology
array and associated mask and flag functions. However,
SD_ASYM_CPUCAPACITY is special in the sense that it depends on the
capacity and presence of all CPUs in the system, i.e. when hotplugging
all CPUs out except those with one particular CPU capacity the flag
should disappear even if the sched_domains don't collapse. Similarly,
the flag is affected by cpusets where load-balancing is turned off.
Detecting when the flags should be set therefore depends not only on
topology information but also the cpuset configuration and hotplug
state. The arch code doesn't have easy access to the cpuset
configuration.
Instead, this patch implements the flag detection in generic code where
cpusets and hotplug state is already taken care of. All the arch is
responsible for is to implement arch_scale_cpu_capacity() and force a
full rebuild of the sched_domain hierarchy if capacities are updated,
e.g. later in the boot process when cpufreq has initialized.
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: valentin.schneider@arm.com
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/1532093554-30504-2-git-send-email-morten.rasmussen@arm.com
[ Fixed 'CPU' capitalization. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix kernel-doc warning for missing 'flags' parameter description:
../kernel/sched/fair.c:3371: warning: Function parameter or member 'flags' not described in 'attach_entity_load_avg'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: ea14b57e8a ("sched/cpufreq: Provide migration hint")
Link: http://lkml.kernel.org/r/cdda0d42-880d-4229-a9f7-5899c977a063@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It was discovered that a constant stream of readers with occassional
writers pounding on a rwsem may cause many of the readers to enter the
slowpath unnecessarily thus increasing latency and lowering performance.
In the current code, a reader entering the slowpath critical section
will unconditionally set the WAITING_BIAS, if not set yet, and clear
its active count even if no one is in the wait queue and no writer
is present. This causes some incoming readers to observe the presence
of waiters in the wait queue and hence have to go into the slowpath
themselves.
With sufficient numbers of readers and a relatively short lock hold time,
the WAITING_BIAS may be repeatedly turned on and off and a substantial
portion of the readers will go into the slowpath sustaining a rather
long queue in the wait queue spinlock and repeated WAITING_BIAS on/off
cycle until the logjam is broken opportunistically.
To avoid this situation from happening, an additional check is added to
detect the special case that the reader in the critical section is the
only one in the wait queue and no writer is present. When that happens,
it can just exit the slowpath and return immediately as its active count
has already been set in the lock. Other incoming readers won't observe
the presence of waiters and so will not be forced into the slowpath.
The issue was found in a customer site where they had an application
that pounded on the pread64 syscalls heavily on an XFS filesystem. The
application was run in a recent 4-socket boxes with a lot of CPUs. They
saw significant spinlock contention in the rwsem_down_read_failed() call.
With this patch applied, the system CPU usage went down from 85% to 57%,
and the spinlock contention in the pread64 syscalls was gone.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1532459425-19204-1-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Weirdly we seem to have forgotten this...
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It can happen that load_balance() finds a busiest group and then a
busiest rq but the calculated imbalance is in fact 0.
In such situation, detach_tasks() returns immediately and lets the
flag LBF_ALL_PINNED set. The busiest CPU is then wrongly assumed to
have pinned tasks and removed from the load balance mask. then, we
redo a load balance without the busiest CPU. This creates wrong load
balance situation and generates wrong task migration.
If the calculated imbalance is 0, it's useless to try to find a
busiest rq as no task will be migrated and we can return immediately.
This situation can happen with heterogeneous system or smp system when
RT tasks are decreasing the capacity of some CPUs.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: jhugo@codeaurora.org
Link: http://lkml.kernel.org/r/1536306664-29827-1-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since commit:
523e979d31 ("sched/core: Use PELT for scale_rt_capacity()")
scale_rt_capacity() returns the remaining capacity and not a scale factor
to apply on cpu_capacity_orig. arch_scale_cpu() is directly called by
scale_rt_capacity() so we must take the sched_domain argument.
Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 523e979d31 ("sched/core: Use PELT for scale_rt_capacity()")
Link: http://lkml.kernel.org/r/20180904093626.GA23936@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When a task which previously ran on a given CPU is remotely queued to
wake up on that same CPU, there is a period where the task's state is
TASK_WAKING and its vruntime is not normalized. This is not accounted
for in vruntime_normalized() which will cause an error in the task's
vruntime if it is switched from the fair class during this time.
For example if it is boosted to RT priority via rt_mutex_setprio(),
rq->min_vruntime will not be subtracted from the task's vruntime but
it will be added again when the task returns to the fair class. The
task's vruntime will have been erroneously doubled and the effective
priority of the task will be reduced.
Note this will also lead to inflation of all vruntimes since the doubled
vruntime value will become the rq's min_vruntime when other tasks leave
the rq. This leads to repeated doubling of the vruntime and priority
penalty.
Fix this by recognizing a WAKING task's vruntime as normalized only if
sched_remote_wakeup is true. This indicates a migration, in which case
the vruntime would have been normalized in migrate_task_rq_fair().
Based on a similar patch from John Dias <joaodias@google.com>.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Steve Muckle <smuckle@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Redpath <Chris.Redpath@arm.com>
Cc: John Dias <joaodias@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Miguel de Dios <migueldedios@google.com>
Cc: Morten Rasmussen <Morten.Rasmussen@arm.com>
Cc: Patrick Bellasi <Patrick.Bellasi@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: kernel-team@android.com
Fixes: b5179ac70d ("sched/fair: Prepare to fix fairness problems on migration")
Link: http://lkml.kernel.org/r/20180831224217.169476-1-smuckle@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
update_blocked_averages() is called to periodiccally decay the stalled load
of idle CPUs and to sync all loads before running load balance.
When cfs rq is idle, it trigs a load balance during pick_next_task_fair()
in order to potentially pull tasks and to use this newly idle CPU. This
load balance happens whereas prev task from another class has not been put
and its utilization updated yet. This may lead to wrongly account running
time as idle time for RT or DL classes.
Test that no RT or DL task is running when updating their utilization in
update_blocked_averages().
We still update RT and DL utilization instead of simply skipping them to
make sure that all metrics are synced when used during load balance.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 371bf42732 ("sched/rt: Add rt_rq utilization tracking")
Fixes: 3727e0e163 ("sched/dl: Add dl_rq utilization tracking")
Link: http://lkml.kernel.org/r/1535728975-22799-1-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With the following commit:
051f3ca02e ("sched/topology: Introduce NUMA identity node sched domain")
the scheduler introduced a new NUMA level. However this leads to the NUMA topology
on 2 node systems to not be marked as NUMA_DIRECT anymore.
After this commit, it gets reported as NUMA_BACKPLANE, because
sched_domains_numa_level is now 2 on 2 node systems.
Fix this by allowing setting systems that have up to 2 NUMA levels as
NUMA_DIRECT.
While here remove code that assumes that level can be 0.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andre Wild <wild@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>
Fixes: 051f3ca02e "Introduce NUMA identity node sched domain"
Link: http://lkml.kernel.org/r/1533920419-17410-1-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The following commit:
08295b3b5b ("Implement an algorithm choice for Wound-Wait mutexes")
introduced a reference in the documentation to a function that was
removed in an earlier commit.
It also forgot to remove a call to debug_mutex_add_waiter() which is now
unconditionally called by __mutex_add_waiter().
Fix those bugs.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dri-devel@lists.freedesktop.org
Fixes: 08295b3b5b ("Implement an algorithm choice for Wound-Wait mutexes")
Link: http://lkml.kernel.org/r/20180903140708.2401-1-thellstrom@vmware.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kernel:
- Modify breakpoint fixes (Jiri Olsa)
perf annotate:
- Fix parsing aarch64 branch instructions after objdump update (Kim Phillips)
- Fix parsing indirect calls in 'perf annotate' (Martin Liška)
perf probe:
- Ignore SyS symbols irrespective of endianness on PowerPC (Sandipan Das)
perf trace:
- Fix include path for asm-generic/unistd.h on arm64 (Kim Phillips)
Core libraries:
- Fix potential null pointer dereference in perf_evsel__new_idx() (Hisao Tanabe)
- Use fixed size string for comms instead of scanf("%m"), that is
not present in the bionic libc and leads to a crash (Chris Phlipot)
- Fix bad memory access in trace info on 32-bit systems, we were reading
8 bytes from a 4-byte long variable when saving the command line in the
perf.data file. (Chris Phlipot)
Build system:
- Streamline bpf examples and headers installation, clarifying
some install messages. (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCW41FnAAKCRCyPKLppCJ+
J8MCAP4/RC5GwNrO5KYJ+G1iYb7QiNq9X/wsM7jCBlqWnTH+zgD9GYPIT3WQWKBN
Rv94N4PNsYP4cpP7hTzWG0ar7p70owo=
=+ODq
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-4.19-20180903' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
Kernel:
- Modify breakpoint fixes (Jiri Olsa)
perf annotate:
- Fix parsing aarch64 branch instructions after objdump update (Kim Phillips)
- Fix parsing indirect calls in 'perf annotate' (Martin Liška)
perf probe:
- Ignore SyS symbols irrespective of endianness on PowerPC (Sandipan Das)
perf trace:
- Fix include path for asm-generic/unistd.h on arm64 (Kim Phillips)
Core libraries:
- Fix potential null pointer dereference in perf_evsel__new_idx() (Hisao Tanabe)
- Use fixed size string for comms instead of scanf("%m"), that is
not present in the bionic libc and leads to a crash (Chris Phlipot)
- Fix bad memory access in trace info on 32-bit systems, we were reading
8 bytes from a 4-byte long variable when saving the command line in the
perf.data file. (Chris Phlipot)
Build system:
- Streamline bpf examples and headers installation, clarifying
some install messages. (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull timekeeping fixes from Thomas Gleixner:
"Two fixes for timekeeping:
- Revert to the previous kthread based update, which is unfortunately
required due to lock ordering issues. The removal caused boot
failures on old Core2 machines. Add a proper comment why the thread
needs to stay to prevent accidental removal in the future.
- Fix a silly typo in a function declaration"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Revert "Remove kthread"
timekeeping: Fix declaration of read_persistent_wall_and_boot_offset()
Pull cpu hotplug fixes from Thomas Gleixner:
"Two fixes for the hotplug state machine code:
- Move the misplaces smb() in the hotplug thread function to the
proper place, otherwise a half update control struct could be
observed
- Prevent state corruption on error rollback, which causes the state
to advance by one and as a consequence skip it in the bringup
sequence"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Prevent state corruption on error rollback
cpu/hotplug: Adjust misplaced smb() in cpuhp_thread_fun()
This goes through a lot of hooks just to call arch_teardown_dma_ops.
Replace it with a direct call instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
There is no good reason for this indirection given that the method
always exists.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
I turns out that the silly spawn kthread from worker was actually needed.
clocksource_watchdog_kthread() cannot be called directly from
clocksource_watchdog_work(), because clocksource_select() calls
timekeeping_notify() which uses stop_machine(). One cannot use
stop_machine() from a workqueue() due lock inversions wrt CPU hotplug.
Revert the patch but add a comment that explain why we jump through such
apparently silly hoops.
Fixes: 7197e77abc ("clocksource: Remove kthread")
Reported-by: Siegfried Metz <frame@mailbox.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Tested-by: Kevin Shanahan <kevin@shanahan.id.au>
Tested-by: viktor_jaegerskuepper@freenet.de
Tested-by: Siegfried Metz <frame@mailbox.org>
Cc: rafael.j.wysocki@intel.com
Cc: len.brown@intel.com
Cc: diego.viola@gmail.com
Cc: rui.zhang@intel.com
Cc: bjorn.andersson@linaro.org
Link: https://lkml.kernel.org/r/20180905084158.GR24124@hirez.programming.kicks-ass.net
WARN_ON() already contains an unlikely(), so it's not necessary to wrap it
into another.
Signed-off-by: Igor Stoppa <igor.stoppa@huawei.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: linux-security-module@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: James Morris <james.morris@microsoft.com>
- The first one is a side effect caused by using SRCU for rcuidle
tracepoints. It seems that the perf was depending on the rcuidle
tracepoints to make RCU watch when it wasn't. The real fix will
bet to have perf use SRCU instead of depending on RCU watching,
but that can't be done until SRCU is safe to use in NMI context
(Paul's working on that).
- The second bug fix is for a bug that's been periodically making
my tests fail randomly for some time. I haven't had time to track
it down, but finally have. It has to do with stressing NMIs (via perf)
while enabling or disabling ftrace function handling with lockdep
enabled. If an interrupt happens and just as it returns, it sets
lockdep back to "interrupts enabled" but before it returns an NMI
is triggered, and if this happens while printk_nmi_enter has a
breakpoint attached to it (because ftrace is converting it to or from
nop to call fentry), the breakpoint trap also calls into lockdep,
and since returning from the NMI to a interrupt handler, interrupts
were disabled when the NMI went off, lockdep keeps its state as
interrupts disabled when it returns back from the interrupt handler
where interrupts are enabled. This causes lockdep_assert_irqs_enabled()
to trigger a false positive.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW5FM2hQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qqdLAP4/M46VXnwt8hZ0g7K0Cc4M3MwkLnNT
xWN3yNSydd/VTAEA13JXiJoKuGTCrYLet+xcvhQxoGsITUrgL+ADJMRy9ww=
=h3hB
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"This fixes two annoying bugs:
- The first one is a side effect caused by using SRCU for rcuidle
tracepoints. It seems that the perf was depending on the rcuidle
tracepoints to make RCU watch when it wasn't.
The real fix will be to have perf use SRCU instead of depending on
RCU watching, but that can't be done until SRCU is safe to use in
NMI context (Paul's working on that).
- The second bug fix is for a bug that's been periodically making my
tests fail randomly for some time. I haven't had time to track it
down, but finally have. It has to do with stressing NMIs (via perf)
while enabling or disabling ftrace function handling with lockdep
enabled.
If an interrupt happens and just as it returns, it sets lockdep
back to "interrupts enabled" but before it returns an NMI is
triggered, and if this happens while printk_nmi_enter has a
breakpoint attached to it (because ftrace is converting it to or
from nop to call fentry), the breakpoint trap also calls into
lockdep, and since returning from the NMI to a interrupt handler,
interrupts were disabled when the NMI went off, lockdep keeps its
state as interrupts disabled when it returns back from the
interrupt handler where interrupts are enabled.
This causes lockdep_assert_irqs_enabled() to trigger a false
positive"
* tag 'trace-v4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
printk/tracing: Do not trace printk_nmi_enter()
tracing: Add back in rcu_irq_enter/exit_irqson() for rcuidle tracepoints
I hit the following splat in my tests:
------------[ cut here ]------------
IRQs not enabled as expected
WARNING: CPU: 3 PID: 0 at kernel/time/tick-sched.c:982 tick_nohz_idle_enter+0x44/0x8c
Modules linked in: ip6t_REJECT nf_reject_ipv6 ip6table_filter ip6_tables ipv6
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.19.0-rc2-test+ #2
Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014
EIP: tick_nohz_idle_enter+0x44/0x8c
Code: ec 05 00 00 00 75 26 83 b8 c0 05 00 00 00 75 1d 80 3d d0 36 3e c1 00
75 14 68 94 63 12 c1 c6 05 d0 36 3e c1 01 e8 04 ee f8 ff <0f> 0b 58 fa bb a0
e5 66 c1 e8 25 0f 04 00 64 03 1d 28 31 52 c1 8b
EAX: 0000001c EBX: f26e7f8c ECX: 00000006 EDX: 00000007
ESI: f26dd1c0 EDI: 00000000 EBP: f26e7f40 ESP: f26e7f38
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010296
CR0: 80050033 CR2: 0813c6b0 CR3: 2f342000 CR4: 001406f0
Call Trace:
do_idle+0x33/0x202
cpu_startup_entry+0x61/0x63
start_secondary+0x18e/0x1ed
startup_32_smp+0x164/0x168
irq event stamp: 18773830
hardirqs last enabled at (18773829): [<c040150c>] trace_hardirqs_on_thunk+0xc/0x10
hardirqs last disabled at (18773830): [<c040151c>] trace_hardirqs_off_thunk+0xc/0x10
softirqs last enabled at (18773824): [<c0ddaa6f>] __do_softirq+0x25f/0x2bf
softirqs last disabled at (18773767): [<c0416bbe>] call_on_stack+0x45/0x4b
---[ end trace b7c64aa79e17954a ]---
After a bit of debugging, I found what was happening. This would trigger
when performing "perf" with a high NMI interrupt rate, while enabling and
disabling function tracer. Ftrace uses breakpoints to convert the nops at
the start of functions to calls to the function trampolines. The breakpoint
traps disable interrupts and this makes calls into lockdep via the
trace_hardirqs_off_thunk in the entry.S code. What happens is the following:
do_idle {
[interrupts enabled]
<interrupt> [interrupts disabled]
TRACE_IRQS_OFF [lockdep says irqs off]
[...]
TRACE_IRQS_IRET
test if pt_regs say return to interrupts enabled [yes]
TRACE_IRQS_ON [lockdep says irqs are on]
<nmi>
nmi_enter() {
printk_nmi_enter() [traced by ftrace]
[ hit ftrace breakpoint ]
<breakpoint exception>
TRACE_IRQS_OFF [lockdep says irqs off]
[...]
TRACE_IRQS_IRET [return from breakpoint]
test if pt_regs say interrupts enabled [no]
[iret back to interrupt]
[iret back to code]
tick_nohz_idle_enter() {
lockdep_assert_irqs_enabled() [lockdep say no!]
Although interrupts are indeed enabled, lockdep thinks it is not, and since
we now do asserts via lockdep, it gives a false warning. The issue here is
that printk_nmi_enter() is called before lockdep_off(), which disables
lockdep (for this reason) in NMIs. By simply not allowing ftrace to see
printk_nmi_enter() (via notrace annotation) we keep lockdep from getting
confused.
Cc: stable@vger.kernel.org
Fixes: 42a0bb3f71 ("printk/nmi: generic solution for safe printk in NMI")
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When a teardown callback fails, the CPU hotplug code brings the CPU back to
the previous state. The previous state becomes the new target state. The
rollback happens in undo_cpu_down() which increments the state
unconditionally even if the state is already the same as the target.
As a consequence the next CPU hotplug operation will start at the wrong
state. This is easily to observe when __cpu_disable() fails.
Prevent the unconditional undo by checking the state vs. target before
incrementing state and fix up the consequently wrong conditional in the
unplug code which handles the failure of the final CPU take down on the
control CPU side.
Fixes: 4dddfb5faa ("smp/hotplug: Rewrite AP state machine core")
Reported-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: josh@joshtriplett.org
Cc: peterz@infradead.org
Cc: jiangshanlai@gmail.com
Cc: dzickus@redhat.com
Cc: brendan.jackman@arm.com
Cc: malat@debian.org
Cc: sramana@codeaurora.org
Cc: linux-arm-msm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1809051419580.1416@nanos.tec.linutronix.de
----
Edward Cree says:
In check_mem_access(), for the PTR_TO_CTX case, after check_ctx_access()
has supplied a reg_type, the other members of the register state are set
appropriately. Previously reg.range was set to 0, but as it is in a
union with reg.map_ptr, which is larger, upper bytes of the latter were
left in place. This then caused the memcmp() in regsafe() to fail,
preventing some branches from being pruned (and occasionally causing the
same program to take a varying number of processed insns on repeated
verifier runs).
Fix the instability by clearing bpf_reg_state in __mark_reg_[un]known()
Fixes: f1174f77b5 ("bpf/verifier: rework value tracking")
Debugged-by: Edward Cree <ecree@solarflare.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Merge misc fixes from Andrew Morton:
"17 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
nilfs2: convert to SPDX license tags
drivers/dax/device.c: convert variable to vm_fault_t type
lib/Kconfig.debug: fix three typos in help text
checkpatch: add __ro_after_init to known $Attribute
mm: fix BUG_ON() in vmf_insert_pfn_pud() from VM_MIXEDMAP removal
uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name
memory_hotplug: fix kernel_panic on offline page processing
checkpatch: add optional static const to blank line declarations test
ipc/shm: properly return EIDRM in shm_lock()
mm/hugetlb: filter out hugetlb pages if HUGEPAGE migration is not supported.
mm/util.c: improve kvfree() kerneldoc
tools/vm/page-types.c: fix "defined but not used" warning
tools/vm/slabinfo.c: fix sign-compare warning
kmemleak: always register debugfs file
mm: respect arch_dup_mmap() return value
mm, oom: fix missing tlb_finish_mmu() in __oom_reap_task_mm().
mm: memcontrol: print proper OOM header when no eligible victim left
Commit d70f2a14b7 ("include/linux/sched/mm.h: uninline mmdrop_async(),
etc") ignored the return value of arch_dup_mmap(). As a result, on x86,
a failure to duplicate the LDT (e.g. due to memory allocation error)
would leave the duplicated memory mapping in an inconsistent state.
Fix by using the return value, as it was before the change.
Link: http://lkml.kernel.org/r/20180823051229.211856-1-namit@vmware.com
Fixes: d70f2a14b7 ("include/linux/sched/mm.h: uninline mmdrop_async(), etc")
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking fixes from David Miller:
1) Must perform TXQ teardown before unregistering interfaces in
mac80211, from Toke Høiland-Jørgensen.
2) Don't allow creating mac80211_hwsim with less than one channel, from
Johannes Berg.
3) Division by zero in cfg80211, fix from Johannes Berg.
4) Fix endian issue in tipc, from Haiqing Bai.
5) BPF sockmap use-after-free fixes from Daniel Borkmann.
6) Spectre-v1 in mac80211_hwsim, from Jinbum Park.
7) Missing rhashtable_walk_exit() in tipc, from Cong Wang.
8) Revert kvzalloc() conversion of AF_PACKET, it breaks mmap() when
kvzalloc() tries to use kmalloc() pages. From Eric Dumazet.
9) Fix deadlock in hv_netvsc, from Dexuan Cui.
10) Do not restart timewait timer on RST, from Florian Westphal.
11) Fix double lwstate refcount grab in ipv6, from Alexey Kodanev.
12) Unsolicit report count handling is off-by-one, fix from Hangbin Liu.
13) Sleep-in-atomic in cadence driver, from Jia-Ju Bai.
14) Respect ttl-inherit in ip6 tunnel driver, from Hangbin Liu.
15) Use-after-free in act_ife, fix from Cong Wang.
16) Missing hold to meta module in act_ife, from Vlad Buslov.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (91 commits)
net: phy: sfp: Handle unimplemented hwmon limits and alarms
net: sched: action_ife: take reference to meta module
act_ife: fix a potential use-after-free
net/mlx5: Fix SQ offset in QPs with small RQ
tipc: correct spelling errors for tipc_topsrv_queue_evt() comments
tipc: correct spelling errors for struct tipc_bc_base's comment
bnxt_en: Do not adjust max_cp_rings by the ones used by RDMA.
bnxt_en: Clean up unused functions.
bnxt_en: Fix firmware signaled resource change logic in open.
sctp: not traverse asoc trans list if non-ipv6 trans exists for ipv6_flowlabel
sctp: fix invalid reference to the index variable of the iterator
net/ibm/emac: wrong emac_calc_base call was used by typo
net: sched: null actions array pointer before releasing action
vhost: fix VHOST_GET_BACKEND_FEATURES ioctl request definition
r8169: add support for NCube 8168 network card
ip6_tunnel: respect ttl inherit for ip6tnl
mac80211: shorten the IBSS debug messages
mac80211: don't Tx a deauth frame if the AP forbade Tx
mac80211: Fix station bandwidth setting after channel switch
mac80211: fix a race between restart and CSA flows
...
Introduce CONFIG_STACKLEAK_RUNTIME_DISABLE option, which provides
'stack_erasing' sysctl. It can be used in runtime to control kernel
stack erasing for kernels built with CONFIG_GCC_PLUGIN_STACKLEAK.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Introduce CONFIG_STACKLEAK_METRICS providing STACKLEAK information about
tasks via the /proc file system. In particular, /proc/<pid>/stack_depth
shows the maximum kernel stack consumption for the current and previous
syscalls. Although this information is not precise, it can be useful for
estimating the STACKLEAK performance impact for your workloads.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
The STACKLEAK feature erases the kernel stack before returning from
syscalls. That reduces the information which kernel stack leak bugs can
reveal and blocks some uninitialized stack variable attacks.
This commit introduces the STACKLEAK gcc plugin. It is needed for
tracking the lowest border of the kernel stack, which is important
for the code erasing the used part of the kernel stack at the end
of syscalls (comes in a separate commit).
The STACKLEAK feature is ported from grsecurity/PaX. More information at:
https://grsecurity.net/https://pax.grsecurity.net/
This code is modified from Brad Spengler/PaX Team's code in the last
public patch of grsecurity/PaX based on our understanding of the code.
Changes or omissions from the original code are ours and don't reflect
the original grsecurity/PaX code.
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
The STACKLEAK feature (initially developed by PaX Team) has the following
benefits:
1. Reduces the information that can be revealed through kernel stack leak
bugs. The idea of erasing the thread stack at the end of syscalls is
similar to CONFIG_PAGE_POISONING and memzero_explicit() in kernel
crypto, which all comply with FDP_RIP.2 (Full Residual Information
Protection) of the Common Criteria standard.
2. Blocks some uninitialized stack variable attacks (e.g. CVE-2017-17712,
CVE-2010-2963). That kind of bugs should be killed by improving C
compilers in future, which might take a long time.
This commit introduces the code filling the used part of the kernel
stack with a poison value before returning to userspace. Full
STACKLEAK feature also contains the gcc plugin which comes in a
separate commit.
The STACKLEAK feature is ported from grsecurity/PaX. More information at:
https://grsecurity.net/https://pax.grsecurity.net/
This code is modified from Brad Spengler/PaX Team's code in the last
public patch of grsecurity/PaX based on our understanding of the code.
Changes or omissions from the original code are ours and don't reflect
the original grsecurity/PaX code.
Performance impact:
Hardware: Intel Core i7-4770, 16 GB RAM
Test #1: building the Linux kernel on a single core
0.91% slowdown
Test #2: hackbench -s 4096 -l 2000 -g 15 -f 25 -P
4.2% slowdown
So the STACKLEAK description in Kconfig includes: "The tradeoff is the
performance impact: on a single CPU system kernel compilation sees a 1%
slowdown, other systems and workloads may vary and you are advised to
test this feature on your expected workload before deploying it".
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
A few fixes for the fallout of being a little more pedantic about
dma masks.
-----BEGIN PGP SIGNATURE-----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=GFai
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.19-2' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"A few fixes for the fallout of being a little more pedantic about dma
masks"
* tag 'dma-mapping-4.19-2' of git://git.infradead.org/users/hch/dma-mapping:
of/platform: initialise AMBA default DMA masks
sparc: set a default 32-bit dma mask for OF devices
kernel/dma/direct: take DMA offset into account in dma_direct_supported
Currently we check sk_user_data is non NULL to determine if the sk
exists in a map. However, this is not sufficient to ensure the psock
or the ULP ops are not in use by another user, such as kcm or TLS. To
avoid this when adding a sock to a map also verify it is of the
correct ULP type. Additionally, when releasing a psock verify that
it is the TCP_ULP_BPF type before releasing the ULP. The error case
where we abort an update due to ULP collision can cause this error
path.
For example,
__sock_map_ctx_update_elem()
[...]
err = tcp_set_ulp_id(sock, TCP_ULP_BPF) <- collides with TLS
if (err) <- so err out here
goto out_free
[...]
out_free:
smap_release_sock() <- calling tcp_cleanup_ulp releases the
TLS ULP incorrectly.
Fixes: 2f857d0460 ("bpf: sockmap, remove STRPARSER map_flags and add multi-map support")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull CPU hotplug fix from Thomas Gleixner:
"Remove the stale skip_onerr member from the hotplug states"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Remove skip_onerr field from cpuhp_step structure
Pull core fixes from Thomas Gleixner:
"A small set of updates for core code:
- Prevent tracing in functions which are called from trace patching
via stop_machine() to prevent executing half patched function trace
entries.
- Remove old GCC workarounds
- Remove pointless includes of notifier.h"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Remove workaround for unreachable warnings from old GCC
notifier: Remove notifier header file wherever not used
watchdog: Mark watchdog touch functions as notrace
When a device has a DMA offset the dma capable result will change due
to the difference between the physical and DMA address. Take that into
account.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
When notifiers were there, `skip_onerr` was used to avoid calling
particular step startup/teardown callbacks in the CPU up/down rollback
path, which made the hotplug asymmetric.
As notifiers are gone now after the full state machine conversion, the
`skip_onerr` field is no longer required.
Remove it from the structure and its usage.
Signed-off-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1535439294-31426-1-git-send-email-mojha@codeaurora.org
Allocating a list_head structure that is almost never used, and, when
used, is used only during early boot (rcu_init() and earlier), is a bit
wasteful. This commit therefore eliminates that list_head in favor of
the one in the work_struct structure. This is safe because the work_struct
structure cannot be used until after rcu_init() returns.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Event tracing is moving to SRCU in order to take advantage of the fact
that SRCU may be safely used from idle and even offline CPUs. However,
event tracing can invoke call_srcu() very early in the boot process,
even before workqueue_init_early() is invoked (let alone rcu_init()).
Therefore, call_srcu()'s attempts to queue work fail miserably.
This commit therefore detects this situation, and refrains from attempting
to queue work before rcu_init() time, but does everything else that it
would have done, and in addition, adds the srcu_struct to a global list.
The rcu_init() function now invokes a new srcu_init() function, which
is empty if CONFIG_SRCU=n. Otherwise, srcu_init() queues work for
each srcu_struct on the list. This all happens early enough in boot
that there is but a single CPU with interrupts disabled, which allows
synchronization to be dispensed with.
Of course, the queued work won't actually be invoked until after
workqueue_init() is invoked, which happens shortly after the scheduler
is up and running. This means that although call_srcu() may be invoked
any time after per-CPU variables have been set up, there is still a very
narrow window when synchronize_srcu() won't work, and this window
extends from the time that the scheduler starts until the time that
workqueue_init() returns. This can be fixed in a manner similar to
the fix for synchronize_rcu_expedited() and friends, but until someone
actually needs to use synchronize_srcu() during this window, this fix
is added churn for no benefit.
Finally, note that Tree SRCU's new srcu_init() function invokes
queue_work() rather than the queue_delayed_work() function that is
invoked post-boot. The reason is that queue_delayed_work() will (as you
would expect) post a timer, and timers have not yet been initialized.
So use of queue_work() avoids the complaints about use of uninitialized
spinlocks that would otherwise result. Besides, some delay is already
provide by the aforementioned fact that the queued work won't actually
be invoked until after the scheduler is up and running.
Requested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
1e64b15a4b ("rcu: Fix grace-period hangs due to race with CPU offline")
added spinlock_t ofl_lock to the rcu_state structure, then takes it with
preemption disabled during CPU offline, which gives the -rt patchset's
sleeping spinlock heartburn.
This commit therefore converts ->ofl_lock to raw_spinlock_t.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
The rcu_data structure's ->dynticks_fqs is incremented but never
accesses. Its ->cond_resched_completed field isn't used at all.
This commit therefore removes both fields.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit move ->dynticks from the rcu_dynticks structure to the
rcu_data structure, replacing the field of the same name. It also updates
the code to access ->dynticks from the rcu_data structure and to use the
rcu_data structure rather than following to now-gone ->dynticks field
to the now-gone rcu_dynticks structure. While in the area, this commit
also fixes up comments.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit removes ->dynticks_nesting and ->dynticks_nmi_nesting from
the rcu_dynticks structure and updates the code to access them from the
rcu_data structure.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit removes ->rcu_need_heavy_qs and ->rcu_urgent_qs from the
rcu_dynticks structure and updates the code to access them from the
rcu_data structure.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit removes ->all_lazy, ->nonlazy_posted and ->nonlazy_posted_snap
from the rcu_dynticks structure and updates the code to access them from
the rcu_data structure.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit removes ->last_accelerate and ->last_advance_all from the
rcu_dynticks structure and updates the code to access them from the
rcu_data structure.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit removes ->tick_nohz_enabled_snap from the rcu_dynticks
structure and updates the code to access it from the rcu_data
structure.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that there is only ever one rcu_data structure per CPU, there is no
need for a separate rcu_dynticks structure. This commit therefore adds
the rcu_dynticks fields into the rcu_data structure in preparation for
removing the rcu_dynticks structure entirely. Note that the ->dynticks
field will be handled specially because there is a field by that name
in both structures.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The resched_cpu() interface is quite handy, but it does acquire the
specified CPU's runqueue lock, which does not come for free. This
commit therefore substitutes the following when directing resched_cpu()
at the current CPU:
set_tsk_need_resched(current);
set_preempt_need_resched();
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Because nohz_full CPUs can leave the scheduler-clock interrupt disabled
even when in kernel mode, RCU cannot rely on rcu_check_callbacks() to
enlist the scheduler's aid in extracting a quiescent state from such CPUs.
This commit therefore more aggressively uses resched_cpu() on nohz_full
CPUs that fail to pass through a quiescent state in a timely manner.
By default, the resched_cpu() beating starts 300 milliseconds into the
quiescent state.
While in the neighborhood, add a ->last_fqs_resched field to the rcu_data
structure in order to rate-limit resched_cpu() calls from the RCU
grace-period kthread.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The jiffies_till_sched_qs value used to determine how old a grace period
must be before RCU enlists the help of the scheduler to force a quiescent
state on the holdout CPU. Currently, this defaults to HZ/10 regardless of
system size and may be set only at boot time. This can be a problem for
very large systems, because if the values of the jiffies_till_first_fqs
and jiffies_till_next_fqs kernel parameters are left at their defaults,
they are calculated to increase as the number of CPUs actually configured
on the system increases. Thus, on a sufficiently large system, RCU would
enlist the help of the scheduler before the grace-period kthread had a
chance to scan for idle CPUs, which wastes CPU time.
This commit therefore allows jiffies_till_sched_qs to be set, if desired,
but if left as default, computes is as jiffies_till_first_fqs plus twice
jiffies_till_next_fqs, thus allowing three force-quiescent-state scans
for idle CPUs. This scales with the number of CPUs, providing sensible
default values.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds rcu_head_init() and rcu_head_after_call_rcu() functions
to help RCU users detect when another CPU has passed the specified
rcu_head structure and function to call_rcu(). The rcu_head_init()
should be invoked before making the structure visible to RCU readers,
and then the rcu_head_after_call_rcu() may be invoked from within
an RCU read-side critical section on an rcu_head structure that
was obtained during a traversal of the data structure in question.
The rcu_head_after_call_rcu() function will return true if the rcu_head
structure has already been passed (with the specified function) to
call_rcu(), otherwise it will return false.
If rcu_head_init() has not been invoked on the rcu_head structure
or if the rcu_head (AKA callback) has already been invoked, then
rcu_head_after_call_rcu() will do WARN_ON_ONCE().
Reported-by: NeilBrown <neilb@suse.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Apply neilb naming feedback. ]
The ->rcu_qs_ctr counter was intended to allow providing a lightweight
report of a quiescent state to all RCU flavors. But now that there is
only one flavor of RCU in any one running kernel, there is no point in
having this feature. This commit therefore removes the ->rcu_qs_ctr
field from the rcu_dynticks structure and the ->rcu_qs_ctr_snap field
from the rcu_data structure. This results in the "rqc" option to the
rcu_fqs trace event no longer being used, so this commit also removes the
"rqc" description from the header comment.
While in the neighborhood, this commit also causes the forward-progress
request .rcu_need_heavy_qs be set one jiffies_till_sched_qs interval
later in the grace period than the first setting of .rcu_urgent_qs.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
If a long-running CPU-bound in-kernel task invokes call_rcu(), the
callback won't be invoked until the next context switch. If there are
no other runnable tasks (which is not an uncommon situation on deep
embedded systems), the callback might never be invoked.
This commit therefore causes rcu_check_callbacks() to ask the scheduler
for a context switch if there are callbacks posted that are still waiting
for a grace period.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that RCU can have readers with multiple segments, it is quite
possible that a specific sequence of reader segments might result in
an rcutorture failure (reader spans a full grace period as detected
by one of the grace-period primitives) or an rcutorture close call
(reader potentially spans a full grace period based on reading out
the RCU implementation's grace-period counter, but with no ordering).
In such cases, it would clearly ease debugging if the offending specific
sequence was known. For the first reader encountering a failure or a
close call, this commit therefore dumps out the segments, delay durations,
and whether or not the reader was preempted.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Mark variables static, as suggested by kbuild test robot. ]
The patch making need_resched() respond to urgent RCU-QS needs used
is_idle_task(current) to detect an interrupt from idle, which does work
reasonably, but is (in theory at least) vulnerable to loops containing
need_resched() invoked from within RCU_NONIDLE() or its tracepoint
equivalent. This commit therefore moves rcu_is_cpu_rrupt_from_idle()
to a place from which rcu_check_callbacks() can invoke it and replaces
the is_idle_task(current) with rcu_is_cpu_rrupt_from_idle().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The per-CPU rcu_dynticks.rcu_urgent_qs variable communicates an urgent
need for an RCU quiescent state from the force-quiescent-state processing
within the grace-period kthread to context switches and to cond_resched().
Unfortunately, such urgent needs are not communicated to need_resched(),
which is sometimes used to decide when to invoke cond_resched(), for
but one example, within the KVM vcpu_run() function. As of v4.15, this
can result in synchronize_sched() being delayed by up to ten seconds,
which can be problematic, to say nothing of annoying.
This commit therefore checks rcu_dynticks.rcu_urgent_qs from within
rcu_check_callbacks(), which is invoked from the scheduling-clock
interrupt handler. If the current task is not an idle task and is
not executing in usermode, a context switch is forced, and either way,
the rcu_dynticks.rcu_urgent_qs variable is set to false. If the current
task is an idle task, then RCU's dyntick-idle code will detect the
quiescent state, so no further action is required. Similarly, if the
task is executing in usermode, other code in rcu_check_callbacks() and
its called functions will report the corresponding quiescent state.
Reported-by: Marius Hillenbrand <mhillenb@amazon.de>
Reported-by: David Woodhouse <dwmw2@infradead.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Because rcu_barrier() is a one-line wrapper function for _rcu_barrier()
and because nothing else calls _rcu_barrier(), this commit inlines
_rcu_barrier() into rcu_barrier().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that rcu_all_qs() is used only in !PREEMPT builds, move it to
tree_plugin.h so that it is defined only in those builds. This in
turn means that rcu_momentary_dyntick_idle() is only used in !PREEMPT
builds, but it is simply marked __maybe_unused in order to keep it
near the rest of the dyntick-idle code.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit removes rcu_sched_get_gp_seq(), rcu_bh_get_gp_seq(),
rcu_exp_batches_completed_sched(), rcu_sched_force_quiescent_state(),
and rcu_bh_force_quiescent_state(), which are no longer used because
rcutorture no longer does "rcu_bh" and "rcu_sched" torture types.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that the RCU-bh and RCU-sched update-side functions are simple
wrappers around their RCU counterparts, there isn't a whole lot of point
in testing them. This commit therefore removes the "rcu_bh" and "sched"
torture types from rcuperf.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that the RCU-bh and RCU-sched update-side functions are simple
wrappers around their RCU counterparts, there isn't a whole lot of point
in testing them. This commit therefore removes the "rcu_bh" and "sched"
torture types from rcutorture.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that the RCU-bh and RCU-sched update-side functions are simple
wrappers around their RCU counterparts, there isn't a whole lot of
point in testing them. This commit therefore removes the self-test
capability and removes the corresponding kernel-boot parameters.
It also updates the various rcutorture .boot files to remove the
kernel boot parameters that call for testing RCU-bh and RCU-sched.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Since there is now a single consolidated RCU flavor, rcutorture
needs to test extending of RCU readers via rcu_read_lock_bh() and
rcu_read_lock_sched(). This commit adds this support, with added checks
(just like for local_bh_enable()) to ensure that rcu_read_unlock_bh()
will not be invoked while interrupts are disabled.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit saves a few lines by consolidating the RCU-sched function
definitions at the end of include/linux/rcupdate.h. This consolidation
also makes it easier to remove them all when the time comes.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit saves a few lines by consolidating the RCU-bh function
definitions at the end of include/linux/rcupdate.h. This consolidation
also makes it easier to remove them all when the time comes.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_gp_kthread() function is long and deeply indented, so this
commit pulls the loop that repeatedly invokes rcu_gp_fqs() into a new
rcu_gp_fqs_loop() function.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Consolidation of the RCU flavors into one makes increment_cpu_stall_ticks()
a trivial one-line function with only one caller. This commit therefore
inlines it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Pointers to rcu_data structures should be named rdp, not rsp. This
commit therefore makes this change.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that there is only one rcu_state structure, there is less point in
maintaining a pointer to it. This commit therefore replaces rsp with
&rcu_state in rcu_cpu_starting() and rcu_init_one().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that there is only one rcu_state structure, there is less point
in maintaining a pointer to it. This commit therefore replaces rsp
with &rcu_state in rcu_barrier_callback(), rcu_barrier_func(), and
_rcu_barrier().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that there is only one rcu_state structure, there is less point in
maintaining a pointer to it. This commit therefore replaces rsp with
&rcu_state in rcu_report_qs_rnp(), force_quiescent_state(), and
rcu_check_gp_start_stall().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that there is only one rcu_state structure, there is less point in
maintaining a pointer to it. This commit therefore replaces rsp with
&rcu_state in rcu_do_batch(), invoke_rcu_callbacks(), and __call_rcu().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that there is only one rcu_state structure, there is less point
in maintaining a pointer to it. This commit therefore replaces
rsp with &rcu_state in rcu_start_this_gp(), rcu_accelerate_cbs(),
__note_gp_changes(), rcu_gp_init(), rcu_gp_fqs(), rcu_gp_cleanup(),
rcu_gp_kthread(), and rcu_report_qs_rsp().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that there is only one rcu_state structure, there is less point
in maintaining a pointer to it. This commit therefore replaces rsp
with &rcu_state in print_other_cpu_stall(), print_cpu_stall(), and
check_cpu_stall().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit removes the rsp and gpa local variables, repurposes the j
local variable and adds a gpk (GP kthread) local to improve readability.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit restructures rcutorture_get_gp_data() to take advantage of
the fact that there is only one flavor of RCU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that there is only ever a single flavor of RCU in a given kernel
build, there isn't a whole lot of point in having a flavor-traversal
macro. This commit therefore removes it and converts calls to it to
straightline code, inlining trivial functions as appropriate.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit removes the last non-flavor-traversal rsp local variable from
kernel/rcu/tree_plugin.h in favor of &rcu_state. The flavor-traversal
locals will be removed with the removal of flavor traversal.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that there is only one rcu_state structure, there is no need for the
rcu_data structure to indicate which it corresponds to. This commit
therefore removes the rcu_data structure's ->rsp field, replacing all
remaining uses of it with &rcu_state.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the Linux
kernel, so there is no need to pass it as a parameter to RCU's rcu_node
tree's accessor macros. This commit therefore removes the rsp parameter
from those macros in kernel/rcu/rcu.h, and removes some now-unused rsp
local variables while in the area.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to
RCU's functions. This commit therefore removes the rsp parameter
from the code in kernel/rcu/tree_exp.h, and removes all of the
rsp local variables while in the area.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to
RCU's functions. This commit therefore removes the rsp parameter
from rcu_nocb_cpu_needs_barrier(), rcu_spawn_one_nocb_kthread(),
rcu_organize_nocb_kthreads(), rcu_nocb_cpu_needs_barrier(), and
rcu_nohz_full_cpu().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
print_cpu_stall_info().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_spawn_one_boost_kthread().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
dump_blkd_tasks() and rcu_preempt_blocked_readers_cgp().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_print_detail_task_stall().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_init_one() and rcu_dump_rcu_node_tree().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of
the Linux kernel, so there is no need to pass it as a parameter
to RCU's functions. This commit therefore removes the rsp
parameter from rcu_boot_init_percpu_data(), rcu_init_percpu_data(),
rcu_cleanup_dying_idle_cpu(), and rcu_migrate_callbacks(). While in
the neighborhood, line the last three into rcutree_prepare_cpu(),
rcu_report_dead() and rcutree_migrate_callbacks(), respectively.
This also gets rid of the for_each_rcu_flavor() calls that were in
those tree functions.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
_rcu_barrier_trace() and _rcu_barrier().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the Linux
kernel, so there is no need to pass it as a parameter to RCU's functions.
This commit therefore removes the rsp parameter from __rcu_pending(),
and also inlines it into rcu_pending(), removing the for_each_rcu_flavor()
while in the neighborhood..
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
__call_rcu_core() and __call_rcu().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
__rcu_process_callbacks(), and also inlines it into rcu_process_callbacks(),
removing the for_each_rcu_flavor() while in the neighborhood.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_check_gp_start_stall().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
force_qs_rnp() and force_quiescent_state().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_do_batch().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_cleanup_dying_cpu() and rcu_cleanup_dead_cpu(). And, as long as
we are in the neighborhood, inlines them into rcutree_dying_cpu() and
rcutree_dead_cpu(), respectively. This also eliminates a pair of
for_each_rcu_flavor() loops.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_check_quiescent_state().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_gp_init(), rcu_gp_fqs_check_wake(), rcu_gp_fqs(), rcu_gp_cleanup(),
and rcu_gp_kthread().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_gp_slow().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
note_gp_changes().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
__note_gp_changes().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_advance_cbs().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_accelerate_cbs_unlocked().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_accelerate_cbs().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_gp_kthread_wake().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_future_gp_cleanup().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
check_cpu_stall().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
print_cpu_stall().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
print_other_cpu_stall().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_stall_kick_kthreads().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_dump_cpu_stacks().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_check_gp_kthread_starvation().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
record_gp_stall_check_time().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_get_root().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_gp_in_progress().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_report_qs_rdp().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_report_unblock_qs_rnp(), which is particularly appropriate in
this case given that this parameter is no longer used.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_report_qs_rsp().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_report_qs_rnp().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_data_p pointer references the default set of per-CPU rcu_data
structures, that is, those that call_rcu() uses, as opposed to
call_rcu_bh() and sometimes call_rcu_sched(). But there is now only one
set of per-CPU rcu_data structures, so that one set is by definition
the default, which means that the rcu_data_p pointer no longer serves
any useful purpose. This commit therefore removes it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_state_p pointer references the default rcu_state structure,
that is, the one that call_rcu() uses, as opposed to call_rcu_bh()
and sometimes call_rcu_sched(). But there is now only one rcu_state
structure, so that one structure is by definition the default, which
means that the rcu_state_p pointer no longer serves any useful purpose.
This commit therefore removes it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_state structure's ->rda field was used to find the per-CPU
rcu_data structures corresponding to that rcu_state structure. But now
there is only one rcu_state structure (creatively named "rcu_state")
and one set of per-CPU rcu_data structures (creatively named "rcu_data").
Therefore, uses of the ->rda field can always be replaced by "rcu_data,
and this commit makes that change and removes the ->rda field.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_state structure's ->call field references the corresponding RCU
flavor's call_rcu() function. However, now that there is only ever one
rcu_state structure in a given build of the Linux kernel, and that flavor
uses plain old call_rcu(), there is not a lot of point in continuing to
have the ->call field. This commit therefore removes it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that a given build of the Linux kernel has only one set of rcu_state,
rcu_node, and rcu_data structures, there is no point in creating a macro
to declare and compile-time initialize them. This commit therefore
just does normal declaration and compile-time initialization of these
structures. While in the area, this commit also removes #ifndefs of
the no-longer-ever-defined preprocessor macro RCU_TREE_NONCORE.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit renames Tiny RCU functions so that the lowest level of
functionality is RCU (e.g., synchronize_rcu()) rather than RCU-sched
(e.g., synchronize_sched()). This provides greater naming compatibility
with Tree RCU, which will in turn permit more LoC removal once
the RCU-sched and RCU-bh update-side API is removed.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Fix Tiny call_rcu()'s EXPORT_SYMBOL() in response to a bug
report from kbuild test robot. ]
Now that RCU-preempt knows about preemption disabling, its implementation
of synchronize_rcu() works for synchronize_sched(), and likewise for the
other RCU-sched update-side API members. This commit therefore confines
the RCU-sched update-side code to CONFIG_PREEMPT=n builds, and defines
RCU-sched's update-side API members in terms of those of RCU-preempt.
This means that any given build of the Linux kernel has only one
update-side flavor of RCU, namely RCU-preempt for CONFIG_PREEMPT=y builds
and RCU-sched for CONFIG_PREEMPT=n builds. This in turn means that kernels
built with CONFIG_RCU_NOCB_CPU=y have only one rcuo kthread per CPU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
The rcu_report_exp_rdp() function is always invoked with its "wake"
argument set to "true", so this commit drops this parameter. The only
potential call site that would use "false" is in the code driving the
expedited grace period, and that code uses rcu_report_exp_cpu_mult()
instead, which therefore retains its "wake" parameter.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit updates comments and help text to account for the fact that
RCU-bh update-side functions are now simple wrappers for their RCU or
RCU-sched counterparts.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that the main RCU API knows about softirq disabling and softirq's
quiescent states, the RCU-bh update code can be dispensed with.
This commit therefore removes the RCU-bh update-side implementation and
defines RCU-bh's update-side API in terms of that of either RCU-preempt or
RCU-sched, depending on the setting of the CONFIG_PREEMPT Kconfig option.
In kernels built with CONFIG_RCU_NOCB_CPU=y this has the knock-on effect
of reducing by one the number of rcuo kthreads per CPU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit reduces the latency of expedited RCU grace periods by
reporting a quiescent state for the CPU at context-switch time.
In CONFIG_PREEMPT=y kernels, if the outgoing task is still within an
RCU read-side critical section (and thus still blocking some grace
period, perhaps including this expedited grace period), then that task
will already have been placed on one of the leaf rcu_node structures'
->blkd_tasks list.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
One necessary step towards consolidating the three flavors of RCU is to
make sure that the resulting consolidated "one flavor to rule them all"
correctly handles networking denial-of-service attacks. One thing that
allows RCU-bh to do so is that __do_softirq() invokes rcu_bh_qs() every
so often, and so something similar has to happen for consolidated RCU.
This must be done carefully. For example, if a preemption-disabled
region of code takes an interrupt which does softirq processing before
returning, consolidated RCU must ignore the resulting rcu_bh_qs()
invocations -- preemption is still disabled, and that means an RCU
reader for the consolidated flavor.
This commit therefore creates a new rcu_softirq_qs() that is called only
from the ksoftirqd task, thus avoiding the interrupted-a-preempted-region
problem. This new rcu_softirq_qs() function invokes rcu_sched_qs(),
rcu_preempt_qs(), and rcu_preempt_deferred_qs(). The latter call handles
any deferred quiescent states.
Note that __do_softirq() still invokes rcu_bh_qs(). It will continue to
do so until a later stage of cleanup when the RCU-bh flavor is removed.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Fix !SMP issue located by kbuild test robot. ]
RCU's dyntick-idle code is written to tolerate half-interrupts, that it,
either an interrupt that invokes rcu_irq_enter() but never invokes the
corresponding rcu_irq_exit() on the one hand, or an interrupt that never
invokes rcu_irq_enter() but does invoke the "corresponding" rcu_irq_exit()
on the other. These things really did happen at one time, as evidenced
by this ca-2011 LKML post:
http://lkml.kernel.org/r/20111014170019.GE2428@linux.vnet.ibm.com
The reason why RCU tolerates half-interrupts is that usermode helpers
used exceptions to invoke a system call from within the kernel such that
the system call did a normal return (not a return from exception) to
the calling context. This caused rcu_irq_enter() to be invoked without
a matching rcu_irq_exit(). However, usermode helpers have since been
rewritten to make much more housebroken use of workqueues, kernel threads,
and do_execve(), and therefore should no longer produce half-interrupts.
No one knows of any other source of half-interrupts, but then again,
no one seems insane enough to go audit the entire kernel to verify that
half-interrupts really are a relic of the past.
This commit therefore adds a pair of WARN_ON_ONCE() calls that will
trigger in the presence of half interrupts, which the code will continue
to handle correctly. If neither of these WARN_ON_ONCE() trigger by
mid-2021, then perhaps RCU can stop handling half-interrupts, which
would be a considerable simplification.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Joel Fernandes <joel@joelfernandes.org>
Reported-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
The ->b.exp_need_qs field is now set only to false, so this commit
removes it. The job this field used to do is now done by the rcu_data
structure's ->deferred_qs field, which is a consequence of a better
split between task-based (the rcu_node structure's ->exp_tasks field) and
CPU-based (the aforementioned rcu_data structure's ->deferred_qs field)
tracking of quiescent states for RCU-preempt expedited grace periods.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
If an RCU-preempt read-side critical section is exiting, that is,
->rcu_read_lock_nesting is negative, then it is a good time to look
at the possibility of reporting deferred quiescent states. This
commit therefore updates the checks in rcu_preempt_need_deferred_qs()
to allow exiting critical sections to report deferred quiescent states.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit makes the "rcu" torture type test extended read-side
critical sections in order to test the deferral of RCU-preempt
quiescent-state testing.
In CONFIG_PREEMPT=n kernels, this simply duplicates the setup already
in place for the "sched" torture type.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit defers reporting of RCU-preempt quiescent states at
rcu_read_unlock_special() time when any of interrupts, softirq, or
preemption are disabled. These deferred quiescent states are reported
at a later RCU_SOFTIRQ, context switch, idle entry, or CPU-hotplug
offline operation. Of course, if another RCU read-side critical
section has started in the meantime, the reporting of the quiescent
state will be further deferred.
This also means that disabling preemption, interrupts, and/or
softirqs will act as an RCU-preempt read-side critical section.
This is enforced by checking preempt_count() as needed.
Some special cases must be handled on an ad-hoc basis, for example,
context switch is a quiescent state even though both the scheduler and
do_exit() disable preemption. In these cases, additional calls to
rcu_preempt_deferred_qs() override the preemption disabling. Similar
logic overrides disabled interrupts in rcu_preempt_check_callbacks()
because in this case the quiescent state happened just before the
corresponding scheduling-clock interrupt.
In theory, this change lifts a long-standing restriction that required
that if interrupts were disabled across a call to rcu_read_unlock()
that the matching rcu_read_lock() also be contained within that
interrupts-disabled region of code. Because the reporting of the
corresponding RCU-preempt quiescent state is now deferred until
after interrupts have been enabled, it is no longer possible for this
situation to result in deadlocks involving the scheduler's runqueue and
priority-inheritance locks. This may allow some code simplification that
might reduce interrupt latency a bit. Unfortunately, in practice this
would also defer deboosting a low-priority task that had been subjected
to RCU priority boosting, so real-time-response considerations might
well force this restriction to remain in place.
Because RCU-preempt grace periods are now blocked not only by RCU
read-side critical sections, but also by disabling of interrupts,
preemption, and softirqs, it will be possible to eliminate RCU-bh and
RCU-sched in favor of RCU-preempt in CONFIG_PREEMPT=y kernels. This may
require some additional plumbing to provide the network denial-of-service
guarantees that have been traditionally provided by RCU-bh. Once these
are in place, CONFIG_PREEMPT=n kernels will be able to fold RCU-bh
into RCU-sched. This would mean that all kernels would have but
one flavor of RCU, which would open the door to significant code
cleanup.
Moving to a single flavor of RCU would also have the beneficial effect
of reducing the NOCB kthreads by at least a factor of two.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Apply rcu_read_unlock_special() preempt_count() feedback
from Joel Fernandes. ]
[ paulmck: Adjust rcu_eqs_enter() call to rcu_preempt_deferred_qs() in
response to bug reports from kbuild test robot. ]
[ paulmck: Fix bug located by kbuild test robot involving recursion
via rcu_preempt_deferred_qs(). ]
When entering or exiting irq or NMI handlers, the current code uses
->dynticks_nmi_nesting to detect if it is in the outermost handler,
that is, the one interrupting or returning to an RCU-idle context (the
idle loop or nohz_full usermode execution). When entering the outermost
handler via an interrupt (as opposed to NMI), it is necessary to invoke
rcu_dynticks_task_exit() just before the CPU is marked non-idle from an
RCU perspective and to invoke rcu_cleanup_after_idle() just after the
CPU is marked non-idle. Similarly, when exiting the outermost handler
via an interrupt, it is necessary to invoke rcu_prepare_for_idle() just
before marking the CPU idle and to invoke rcu_dynticks_task_enter()
just after marking the CPU idle.
The decision to execute these four functions is currently taken in
rcu_irq_enter() and rcu_irq_exit() as follows:
rcu_irq_enter()
/* A conditional branch with ->dynticks_nmi_nesting */
rcu_nmi_enter()
/* A conditional branch with ->dynticks */
/* A conditional branch with ->dynticks_nmi_nesting */
rcu_irq_exit()
/* A conditional branch with ->dynticks_nmi_nesting */
rcu_nmi_exit()
/* A conditional branch with ->dynticks_nmi_nesting */
/* A conditional branch with ->dynticks_nmi_nesting */
rcu_nmi_enter()
/* A conditional branch with ->dynticks */
rcu_nmi_exit()
/* A conditional branch with ->dynticks_nmi_nesting */
This works, but the conditional branches in rcu_irq_enter() and
rcu_irq_exit() are redundant with those in rcu_nmi_enter() and
rcu_nmi_exit(), respectively. Redundant branches are not something
we want in the to/from-idle fastpaths, so this commit refactors
rcu_{nmi,irq}_{enter,exit}() so they use a common inlined function passed
a constant argument as follows:
rcu_irq_enter() inlining rcu_nmi_enter_common(irq=true)
/* A conditional branch with ->dynticks */
rcu_irq_exit() inlining rcu_nmi_exit_common(irq=true)
/* A conditional branch with ->dynticks_nmi_nesting */
rcu_nmi_enter() inlining rcu_nmi_enter_common(irq=false)
/* A conditional branch with ->dynticks */
rcu_nmi_exit() inlining rcu_nmi_exit_common(irq=false)
/* A conditional branch with ->dynticks_nmi_nesting */
The combination of the constant function argument and the inlining allows
the compiler to discard the conditionals that previously controlled
execution of rcu_dynticks_task_exit(), rcu_cleanup_after_idle(),
rcu_prepare_for_idle(), and rcu_dynticks_task_enter(). This reduces both
the to-idle and from-idle path lengths by two conditional branches each,
and improves readability as well.
This commit also changes order of execution from this:
rcu_dynticks_task_exit();
rcu_dynticks_eqs_exit();
trace_rcu_dyntick();
rcu_cleanup_after_idle();
To this:
rcu_dynticks_task_exit();
rcu_dynticks_eqs_exit();
rcu_cleanup_after_idle();
trace_rcu_dyntick();
In other words, the calls to rcu_cleanup_after_idle() and
trace_rcu_dyntick() are reversed. This has no functional effect because
the real concern is whether a given call is before or after the call to
rcu_dynticks_eqs_exit(), and this patch does not change that. Before the
call to rcu_dynticks_eqs_exit(), RCU is not yet watching the current
CPU and after that call RCU is watching.
A similar switch in calling order happens on the idle-entry path, with
similar lack of effect for the same reasons.
Suggested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Applied Steven Rostedt feedback. ]
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
We can safely enable the breakpoint back for both the fail and success
paths by checking only the bp->attr.disabled, which either holds the new
'requested' disabled state or the original breakpoint state.
Committer testing:
At the end of the series, the 'perf test' entry introduced as the first
patch now runs to completion without finding the fixed issues:
# perf test "bp modify"
62: x86 bp modify : Ok
#
In verbose mode:
# perf test -v "bp modify"
62: x86 bp modify :
--- start ---
test child forked, pid 5161
rip 5950a0, bp_1 0x5950a0
in bp_1
rip 5950a0, bp_1 0x5950a0
in bp_1
test child finished with 0
---- end ----
x86 bp modify: Ok
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Milind Chabbi <chabbi.milind@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180827091228.2878-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we enable the breakpoint back only if the breakpoint
modification was successful. If it fails we can leave the breakpoint in
disabled state with attr->disabled == 0.
We can safely enable the breakpoint back for both the fail and success
paths by checking the bp->attr.disabled, which either holds the new
'requested' disabled state or the original breakpoint state.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Milind Chabbi <chabbi.milind@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180827091228.2878-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Once the breakpoint was succesfully modified, the attr->disabled value
is in bp->attr.disabled. So there's no reason to set it again, removing
that.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Milind Chabbi <chabbi.milind@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180827091228.2878-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to change the breakpoint even if the attr with new fields has
disabled set to true.
Current code prevents following user code to change the breakpoint
address:
ptrace(PTRACE_POKEUSER, child, offsetof(struct user, u_debugreg[0]), addr_1)
ptrace(PTRACE_POKEUSER, child, offsetof(struct user, u_debugreg[0]), addr_2)
ptrace(PTRACE_POKEUSER, child, offsetof(struct user, u_debugreg[7]), dr7)
The first PTRACE_POKEUSER creates the breakpoint with attr.disabled set
to true:
ptrace_set_breakpoint_addr(nr = 0)
struct perf_event *bp = t->ptrace_bps[nr];
ptrace_register_breakpoint(..., disabled = true)
ptrace_fill_bp_fields(..., disabled)
register_user_hw_breakpoint
So the second PTRACE_POKEUSER will be omitted:
ptrace_set_breakpoint_addr(nr = 0)
struct perf_event *bp = t->ptrace_bps[nr];
struct perf_event_attr attr = bp->attr;
modify_user_hw_breakpoint(bp, &attr)
if (!attr->disabled)
modify_user_hw_breakpoint_check
Reported-by: Milind Chabbi <chabbi.milind@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180827091228.2878-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Added bpffs pretty print for percpu arraymap, percpu hashmap
and percpu lru hashmap.
For each map <key, value> pair, the format is:
<key_value>: {
cpu0: <value_on_cpu0>
cpu1: <value_on_cpu1>
...
cpun: <value_on_cpun>
}
For example, on my VM, there are 4 cpus, and
for test_btf test in the next patch:
cat /sys/fs/bpf/pprint_test_percpu_hash
You may get:
...
43602: {
cpu0: {43602,0,-43602,0x3,0xaa52,0x3,{43602|[82,170,0,0,0,0,0,0]},ENUM_TWO}
cpu1: {43602,0,-43602,0x3,0xaa52,0x3,{43602|[82,170,0,0,0,0,0,0]},ENUM_TWO}
cpu2: {43602,0,-43602,0x3,0xaa52,0x3,{43602|[82,170,0,0,0,0,0,0]},ENUM_TWO}
cpu3: {43602,0,-43602,0x3,0xaa52,0x3,{43602|[82,170,0,0,0,0,0,0]},ENUM_TWO}
}
72847: {
cpu0: {72847,0,-72847,0x3,0x11c8f,0x3,{72847|[143,28,1,0,0,0,0,0]},ENUM_THREE}
cpu1: {72847,0,-72847,0x3,0x11c8f,0x3,{72847|[143,28,1,0,0,0,0,0]},ENUM_THREE}
cpu2: {72847,0,-72847,0x3,0x11c8f,0x3,{72847|[143,28,1,0,0,0,0,0]},ENUM_THREE}
cpu3: {72847,0,-72847,0x3,0x11c8f,0x3,{72847|[143,28,1,0,0,0,0,0]},ENUM_THREE}
}
...
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Some architectures need to use stop_machine() to patch functions for
ftrace, and the assumption is that the stopped CPUs do not make function
calls to traceable functions when they are in the stopped state.
Commit ce4f06dcbb ("stop_machine: Touch_nmi_watchdog() after
MULTI_STOP_PREPARE") added calls to the watchdog touch functions from
the stopped CPUs and those functions lack notrace annotations. This
leads to crashes when enabling/disabling ftrace on ARM kernels built
with the Thumb-2 instruction set.
Fix it by adding the necessary notrace annotations.
Fixes: ce4f06dcbb ("stop_machine: Touch_nmi_watchdog() after MULTI_STOP_PREPARE")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: oleg@redhat.com
Cc: tj@kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180821152507.18313-1-vincent.whitchurch@axis.com
If a stack slot does not hold a spilled register (STACK_SPILL), then each
of its eight bytes could potentially have a different slot_type. This
information can be important for debugging, and previously we either did
not print anything for the stack slot, or just printed fp-X=0 in the case
where its first byte was STACK_ZERO.
Instead, print eight characters with either 0 (STACK_ZERO), m (STACK_MISC)
or ? (STACK_INVALID) for any stack slot which is neither STACK_SPILL nor
entirely STACK_INVALID.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
By giving each register its own liveness chain, we elide the skip_callee()
logic. Instead, each register's parent is the state it inherits from;
both check_func_call() and prepare_func_exit() automatically connect
reg states to the correct chain since when they copy the reg state across
(r1-r5 into the callee as args, and r0 out as the return value) they also
copy the parent pointer.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The current forward-progress testing maintains a self-propagating
callback during the full test. This could result in false negatives
for stutter-end checking, where it might appear that RCU was clearing
out old callbacks only because it was being continually motivated by
the self-propagating callback. This commit therefore shuts down the
self-propagating callback at the end of each forward-progress test
interval.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_torture_writer() function invokes stutter_wait() at the end of
each writer pass, which occasionally blocks for an extended time period
in order to ensure that RCU can handle intermittent loads. But part of
handling a busy period is invoking all the callbacks before the end of
the idle period induced by stutter_wait().
This commit therefore adds a return value to stutter_wait() indicating
whether stutter_wait() actually waited. In addition, this commit causes
rcu_torture_writer() to test this value and if set, checks that all the
elements of the rcu_tortures[] array have been freed up.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit prints the duration of the forward-progress test interval in
the case that no forward progress was observed as an aid to debugging.
When forward progress does happen, it prints out the number of
rcu_torture_writer() versions and grace periods that elapsed during the
forward-progress test. At the end of the run, it also prints the number
of attempted and actual forward-progress tests.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, rcutorture provisions rcu_torture_reader() kthreads based
on the initial number of CPUs. This can be problematic when CPU hotplug
is enabled, as a system with a very large number of CPUs will provision
a very large number of rcu_torture_reader() kthreads. All of these
kthreads will continue running even if the CPU-hotplug operations result
in only one remaining online CPU. This can result in all sorts of strange
artifacts due simply to massive overload.
This commit therefore causes the rcu_torture_reader() kthreads to start
blocking as the number of online CPUs decreases. This is accomplished
by numbering these kthreads, and having each check to make sure that the
number of online CPUs is at least as large as its assigned number.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
On !SMP tests, the forward-progress kthread might prevent RCU's
grace-period kthread from running, which would defeat RCU's
forward-progress measures. On PREEMPT tests without RCU priority
boosting, the forward-progress kthread might preempt a reader for an
extended time period, which would also defeat RCU's forward-progress
measures. This commit therefore reduced rcutorture's forward-progress
kthread's priority in those cases.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There are debug checks in some environments that will complain if the
duration of a bh-disabled region of code exceeds about 50 milliseconds.
Because rcu_read_delay() can produce a 50-millisecond delay and because
there could be up to eight reader segments with such delays, this commit
limits the maximum delay to 10 milliseconds if either interrupts or
softirqs are disabled.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
RCU now takes certain actions 100 and 200 milliseconds into a grace period
by default, but rcutorture only runs RCU read-side critical sections
with durations up to 50 milliseconds. This commit therefore increases
test coverage by increasing the maximum critical-section duration to
300 milliseconds. Note that the existing code automatically dials down
the probability of long delays based on the maximum duration, which means
that this change should not significantly change the rate of execution
of RCU read-side critical sections.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
If rcutorture is run on a quiet system with the rcutorture.stutter module
parameter set high, then there can legitimately be an extended period
during which no RCU forward progress takes place. This can result
in false-positive no-forward-progress splats. This commit therefore
makes rcu_torture_fwd_prog() create a self-propagating RCU callback
to ensure that grace periods are in progress for the duration of the
forward-progress test.
Note that the RCU flavor under test must define ->call(), ->sync(),
and ->cb_barrier() for this self-propagating callback to be created.
If one or more of those rcu_torture_ops fields are NULL, then the
rcu_torture_fwd_prog() function will silently proceed without creating
the self-propagating callback.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Some of the Linux kernel's RCU implementations provide several mechanisms
to promote forward progress that operate over different timeframes.
This commit therefore causes rcu_torture_fwd_prog() to vary the duration
of its forward-progress testing in order to test each such mechanism.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In a too-short test, random delays can cause each attempt to do
forward-progress testing to fail to complete, thus resulting in
spurious splats. This commit therefore requires at least five tries
before complaining about rcutorture runs that failed to produce at
least one valid forward-progress testing attempt. Note that actual
forward-progress failures will splat regardless of the number of tries.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, rcutorture relies solely on the progress of
rcu_torture_writer() to judge grace-period forward progress. In theory,
this is the gold standard of forward progress, but in practice rcutorture
separately detects and reports rcu_torture_writer() stalls. This commit
therefore adds the grace-period sequence number (when provided) to the
judgment of grace-period forward progress, which makes it easier to
distinguish between failure of actual grace periods to progress on the
one hand and downstream forward-progress failures on the other.
For example, given this change, if rcu_torture_writer() stalls,
but rcu_torture_fwd_prog() does not complain, then the grace-period
computation is working, which is a hint that the failure lies in callback
processing, wakeup of the rcu_torture_writer() kthread, or similar.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds a kthread that loops going into and out of RCU
read-side critical sections, but also including a cond_resched(),
optionally guarded by a check of need_resched(), in that same loop.
This commit relies solely on rcu_torture_writer() progress to judge
the forward progress of grace periods.
Note that Tasks RCU and SRCU are exempted from forward-progress testing
due their (intentionally) less-robust forward-progress guarantees.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
When running a built-in rcuperf test, specifying an invalid perf type
results in what looks like a hard hang, with the error messages hidden
by other boot-time output. This commit therefore executes a WARN_ON()
in this case so that the splat appears just following the error messages.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
When running a built-in rcutorture test, specifying an invalid torture
type results in what looks like a hard hang, with the error messages
hidden by other boot-time output. This commit therefore executes a
WARN_ON() in this case so that the splat appears just following the
error messages.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Deferred quiescent states can interact with the scheduler, but
rcu_torture_reader() does not force such interaction all that frequently.
This commit therefore blocks for one jiffy after ten jiffies of read-side
runtime. This has the beneficial effect of being most likely to block
just after long-running readers, and it is exactly these readers that
are most likely to have been preempted (in CONFIG_PREEMPT=y kernels).
This in turn helps increase the probability that a deferred quiescent
state will be seen by RCU's context-switch hooks.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This changes sys_rt_sigtimedwait() to use get_timespec64(), changing
the timeout type to __kernel_timespec, which will be changed to use
a 64-bit time_t in the future. Since the do_sigtimedwait() core
function changes, we also have to modify the compat version of this
system call in the same way.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is a preparation patch for converting sys_sched_rr_get_interval to
work with 64-bit time_t on 32-bit architectures. The 'interval' argument
is changed to struct __kernel_timespec, which will be redefined using
64-bit time_t in the future. The compat version of the system call in
turn is enabled for compilation with CONFIG_COMPAT_32BIT_TIME so
the individual 32-bit architectures can share the handling of the
traditional argument with 64-bit architectures providing it for their
compat mode.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The kbuild test robot reports two new warnings with the previous
patch:
kernel/time/time.c:866:5: sparse: symbol '__get_old_timespec32' was not declared. Should it be static?
kernel/time/time.c:882:5: sparse: symbol '__put_old_timespec32' was not declared. Should it be static?
These are actually older bugs, but came up now after the
symbol got renamed. Fortunately, commit afef05cf23 ("time:
Enable get/put_compat_itimerspec64 always") makes the two functions
(__compat_get_timespec64/__compat_get_timespec64) local to time.c already,
so we can mark them as 'static'.
Fixes: ee16c8f415e4 ("y2038: Globally rename compat_time to old_time32")
Signed-off-by: kbuild test robot <fengguang.wu@intel.com>
[arnd: added changelog text]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Currently, when a redirect occurs in sockmap and an error occurs in
the redirect call we unwind the scatterlist once in the error path
of bpf_tcp_sendmsg_do_redirect() and then again in sendmsg(). Then
in the error path of sendmsg we decrement the copied count by the
send size.
However, its possible we partially sent data before the error was
generated. This can happen if do_tcp_sendpages() partially sends the
scatterlist before encountering a memory pressure error. If this
happens we need to decrement the copied value (the value tracking
how many bytes were actually sent to TCP stack) by the number of
remaining bytes _not_ the entire send size. Otherwise we risk
confusing userspace.
Also we don't need two calls to free the scatterlist one is
good enough. So remove the one in bpf_tcp_sendmsg_do_redirect() and
then properly reduce copied by the number of remaining bytes which
may in fact be the entire send size if no bytes were sent.
To do this use bool to indicate if free_start_sg() should do mem
accounting or not.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
In bpf_tcp_recvmsg() we first took a reference on the psock, however
once we find that there are skbs in the normal socket's receive queue
we return with processing them through tcp_recvmsg(). Problem is that
we leak the taken reference on the psock in that path. Given we don't
really do anything with the psock at this point, move the skb_queue_empty()
test before we fetch the psock to fix this case.
Fixes: 8934ce2fd0 ("bpf: sockmap redirect ingress support")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_tcp_close() we pop the psock linkage to a map via psock_map_pop().
A parallel update on the sock hash map can happen between psock_map_pop()
and lookup_elem_raw() where we override the element under link->hash /
link->key. In bpf_tcp_close()'s lookup_elem_raw() we subsequently only
test whether an element is present, but we do not test whether the
element is infact the element we were looking for.
We lock the sock in bpf_tcp_close() during that time, so do we hold
the lock in sock_hash_update_elem(). However, the latter locks the
sock which is newly updated, not the one we're purging from the hash
table. This means that while one CPU is doing the lookup from bpf_tcp_close(),
another CPU is doing the map update in parallel, dropped our sock from
the hlist and released the psock.
Subsequently the first CPU will find the new sock and attempts to drop
and release the old sock yet another time. Fix is that we need to check
the elements for a match after lookup, similar as we do in the sock map.
Note that the hash tab elems are freed via RCU, so access to their
link->hash / link->key is fine since we're under RCU read side there.
Fixes: e9db4ef6bf ("bpf: sockhash fix omitted bucket lock in sock_close")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull networking fixes from David Miller:
1) ICE, E1000, IGB, IXGBE, and I40E bug fixes from the Intel folks.
2) Better fix for AB-BA deadlock in packet scheduler code, from Cong
Wang.
3) bpf sockmap fixes (zero sized key handling, etc.) from Daniel
Borkmann.
4) Send zero IPID in TCP resets and SYN-RECV state ACKs, to prevent
attackers using it as a side-channel. From Eric Dumazet.
5) Memory leak in mediatek bluetooth driver, from Gustavo A. R. Silva.
6) Hook up rt->dst.input of ipv6 anycast routes properly, from Hangbin
Liu.
7) hns and hns3 bug fixes from Huazhong Tan.
8) Fix RIF leak in mlxsw driver, from Ido Schimmel.
9) iova range check fix in vhost, from Jason Wang.
10) Fix hang in do_tcp_sendpages() with tls, from John Fastabend.
11) More r8152 chips need to disable RX aggregation, from Kai-Heng Feng.
12) Memory exposure in TCA_U32_SEL handling, from Kees Cook.
13) TCP BBR congestion control fixes from Kevin Yang.
14) hv_netvsc, ignore non-PCI devices, from Stephen Hemminger.
15) qed driver fixes from Tomer Tayar.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (77 commits)
net: sched: Fix memory exposure from short TCA_U32_SEL
qed: fix spelling mistake "comparsion" -> "comparison"
vhost: correctly check the iova range when waking virtqueue
qlge: Fix netdev features configuration.
net: macb: do not disable MDIO bus at open/close time
Revert "net: stmmac: fix build failure due to missing COMMON_CLK dependency"
net: macb: Fix regression breaking non-MDIO fixed-link PHYs
mlxsw: spectrum_switchdev: Do not leak RIFs when removing bridge
i40e: fix condition of WARN_ONCE for stat strings
i40e: Fix for Tx timeouts when interface is brought up if DCB is enabled
ixgbe: fix driver behaviour after issuing VFLR
ixgbe: Prevent unsupported configurations with XDP
ixgbe: Replace GFP_ATOMIC with GFP_KERNEL
igb: Replace mdelay() with msleep() in igb_integrated_phy_loopback()
igb: Replace GFP_ATOMIC with GFP_KERNEL in igb_sw_init()
igb: Use an advanced ctx descriptor for launchtime
e1000: ensure to free old tx/rx rings in set_ringparam()
e1000: check on netif_running() before calling e1000_up()
ixgb: use dma_zalloc_coherent instead of allocator/memset
ice: Trivial formatting fixes
...
Christoph Hellwig suggested a slightly different path for handling
backwards compatibility with the 32-bit time_t based system calls:
Rather than simply reusing the compat_sys_* entry points on 32-bit
architectures unchanged, we get rid of those entry points and the
compat_time types by renaming them to something that makes more sense
on 32-bit architectures (which don't have a compat mode otherwise),
and then share the entry points under the new name with the 64-bit
architectures that use them for implementing the compatibility.
The following types and interfaces are renamed here, and moved
from linux/compat_time.h to linux/time32.h:
old new
--- ---
compat_time_t old_time32_t
struct compat_timeval struct old_timeval32
struct compat_timespec struct old_timespec32
struct compat_itimerspec struct old_itimerspec32
ns_to_compat_timeval() ns_to_old_timeval32()
get_compat_itimerspec64() get_old_itimerspec32()
put_compat_itimerspec64() put_old_itimerspec32()
compat_get_timespec64() get_old_timespec32()
compat_put_timespec64() put_old_timespec32()
As we already have aliases in place, this patch addresses only the
instances that are relevant to the system call interface in particular,
not those that occur in device drivers and other modules. Those
will get handled separately, while providing the 64-bit version
of the respective interfaces.
I'm not renaming the timex, rusage and itimerval structures, as we are
still debating what the new interface will look like, and whether we
will need a replacement at all.
This also doesn't change the names of the syscall entry points, which can
be done more easily when we actually switch over the 32-bit architectures
to use them, at that point we need to change COMPAT_SYSCALL_DEFINEx to
SYSCALL_DEFINEx with a new name, e.g. with a _time32 suffix.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/lkml/20180705222110.GA5698@infradead.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
get_seconds() and do_gettimeofday() are only used by a few modules now any
more (waiting for the respective patches to get accepted), and they are
among the last holdouts of code that is not y2038 safe in the core kernel.
Move the implementation into the timekeeping32.h header to clean up
the core kernel and isolate the old interfaces further.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
After many small patches, at least some of the deprecated interfaces
have no remaining users any more and can be removed:
current_kernel_time
do_settimeofday
get_monotonic_boottime
get_monotonic_boottime64
get_monotonic_coarse
get_monotonic_coarse64
getrawmonotonic64
ktime_get_real_ts
timekeeping_clocktai
timespec_trunc
timespec_valid_strict
time_to_tm
For many of the remaining time functions, we are missing one or
two patches that failed to make it into 4.19, they will be removed
in the following merge window.
The replacement functions for the removed interfaces are documented in
Documentation/core-api/timekeeping.rst.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull perf updates from Thomas Gleixner:
"Kernel:
- Improve kallsyms coverage
- Add x86 entry trampolines to kcore
- Fix ARM SPE handling
- Correct PPC event post processing
Tools:
- Make the build system more robust
- Small fixes and enhancements all over the place
- Update kernel ABI header copies
- Preparatory work for converting libtraceevnt to a shared library
- License cleanups"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
tools arch: Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy'
tools arch x86: Update tools's copy of cpufeatures.h
perf python: Fix pyrf_evlist__read_on_cpu() interface
perf mmap: Store real cpu number in 'struct perf_mmap'
perf tools: Remove ext from struct kmod_path
perf tools: Add gzip_is_compressed function
perf tools: Add lzma_is_compressed function
perf tools: Add is_compressed callback to compressions array
perf tools: Move the temp file processing into decompress_kmodule
perf tools: Use compression id in decompress_kmodule()
perf tools: Store compression id into struct dso
perf tools: Add compression id into 'struct kmod_path'
perf tools: Make is_supported_compression() static
perf tools: Make decompress_to_file() function static
perf tools: Get rid of dso__needs_decompress() call in __open_dso()
perf tools: Get rid of dso__needs_decompress() call in symbol__disassemble()
perf tools: Get rid of dso__needs_decompress() call in read_object_code()
tools lib traceevent: Change to SPDX License format
perf llvm: Allow passing options to llc in addition to clang
perf parser: Improve error message for PMU address filters
...
Pull licking update from Thomas Gleixner:
"Mark the switch cases which fall through to the next case with the
proper comment so the fallthrough compiler checks can be enabled"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Mark expected switch fall-throughs
* memory_failure() gets confused by dev_pagemap backed mappings. The
recovery code has specific enabling for several possible page states
that needs new enabling to handle poison in dax mappings. Teach
memory_failure() about ZONE_DEVICE pages.
-----BEGIN PGP SIGNATURE-----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=Ftop
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.19_dax-memory-failure' of gitolite.kernel.org:pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm memory-failure update from Dave Jiang:
"As it stands, memory_failure() gets thoroughly confused by dev_pagemap
backed mappings. The recovery code has specific enabling for several
possible page states and needs new enabling to handle poison in dax
mappings.
In order to support reliable reverse mapping of user space addresses:
1/ Add new locking in the memory_failure() rmap path to prevent races
that would typically be handled by the page lock.
2/ Since dev_pagemap pages are hidden from the page allocator and the
"compound page" accounting machinery, add a mechanism to determine
the size of the mapping that encompasses a given poisoned pfn.
3/ Given pmem errors can be repaired, change the speculatively
accessed poison protection, mce_unmap_kpfn(), to be reversible and
otherwise allow ongoing access from the kernel.
A side effect of this enabling is that MADV_HWPOISON becomes usable
for dax mappings, however the primary motivation is to allow the
system to survive userspace consumption of hardware-poison via dax.
Specifically the current behavior is:
mce: Uncorrected hardware memory error in user-access at af34214200
{1}[Hardware Error]: It has been corrected by h/w and requires no further action
mce: [Hardware Error]: Machine check events logged
{1}[Hardware Error]: event severity: corrected
Memory failure: 0xaf34214: reserved kernel page still referenced by 1 users
[..]
Memory failure: 0xaf34214: recovery action for reserved kernel page: Failed
mce: Memory error not recovered
<reboot>
...and with these changes:
Injecting memory failure for pfn 0x20cb00 at process virtual address 0x7f763dd00000
Memory failure: 0x20cb00: Killing dax-pmd:5421 due to hardware memory corruption
Memory failure: 0x20cb00: recovery action for dax page: Recovered
Given all the cross dependencies I propose taking this through
nvdimm.git with acks from Naoya, x86/core, x86/RAS, and of course dax
folks"
* tag 'libnvdimm-for-4.19_dax-memory-failure' of gitolite.kernel.org:pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm, pmem: Restore page attributes when clearing errors
x86/memory_failure: Introduce {set, clear}_mce_nospec()
x86/mm/pat: Prepare {reserve, free}_memtype() for "decoy" addresses
mm, memory_failure: Teach memory_failure() about dev_pagemap pages
filesystem-dax: Introduce dax_lock_mapping_entry()
mm, memory_failure: Collect mapping size in collect_procs()
mm, madvise_inject_error: Let memory_failure() optionally take a page reference
mm, dev_pagemap: Do not clear ->mapping on final put
mm, madvise_inject_error: Disable MADV_SOFT_OFFLINE for ZONE_DEVICE pages
filesystem-dax: Set page->index
device-dax: Set page->index
device-dax: Enable page_mapping()
device-dax: Convert to vmf_insert_mixed and vm_fault_t
Pull cgroup updates from Tejun Heo:
"Just one commit from Steven to take out spin lock from trace event
handlers"
* 'for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/tracing: Move taking of spin lock out of trace event handlers
Pull workqueue updates from Tejun Heo:
"Over the lockdep cross-release churn, workqueue lost some of the
existing annotations. Johannes Berg restored it and also improved
them"
* 'for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: re-add lockdep dependencies for flushing
workqueue: skip lockdep wq dependency in cancel_work_sync()
Pull namespace fixes from Eric Biederman:
"This is a set of four fairly obvious bug fixes:
- a switch from d_find_alias to d_find_any_alias because the xattr
code perversely takes a dentry
- two mutex vs copy_to_user fixes from Jann Horn
- a fix to use a sanitized size not the size userspace passed in from
Christian Brauner"
* 'userns-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
getxattr: use correct xattr length
sys: don't hold uts_sem while accessing userspace memory
userns: move user access out of the mutex
cap_inode_getsecurity: use d_find_any_alias() instead of d_find_alias()
Merge yet more updates from Andrew Morton:
- the rest of MM
- various misc fixes and tweaks
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits)
mm: Change return type int to vm_fault_t for fault handlers
lib/fonts: convert comments to utf-8
s390: ebcdic: convert comments to UTF-8
treewide: convert ISO_8859-1 text comments to utf-8
drivers/gpu/drm/gma500/: change return type to vm_fault_t
docs/core-api: mm-api: add section about GFP flags
docs/mm: make GFP flags descriptions usable as kernel-doc
docs/core-api: split memory management API to a separate file
docs/core-api: move *{str,mem}dup* to "String Manipulation"
docs/core-api: kill trailing whitespace in kernel-api.rst
mm/util: add kernel-doc for kvfree
mm/util: make strndup_user description a kernel-doc comment
fs/proc/vmcore.c: hide vmcoredd_mmap_dumps() for nommu builds
treewide: correct "differenciate" and "instanciate" typos
fs/afs: use new return type vm_fault_t
drivers/hwtracing/intel_th/msu.c: change return type to vm_fault_t
mm: soft-offline: close the race against page allocation
mm: fix race on soft-offlining free huge pages
namei: allow restricted O_CREAT of FIFOs and regular files
hfs: prevent crash on exit from failed search
...
Use new return type vm_fault_t for fault handler. For now, this is just
documenting that the function returns a VM_FAULT value rather than an
errno. Once all instances are converted, vm_fault_t will become a
distinct type.
Ref-> commit 1c8f422059 ("mm: change return type to vm_fault_t")
The aim is to change the return type of finish_fault() and
handle_mm_fault() to vm_fault_t type. As part of that clean up return
type of all other recursively called functions have been changed to
vm_fault_t type.
The places from where handle_mm_fault() is getting invoked will be
change to vm_fault_t type but in a separate patch.
vmf_error() is the newly introduce inline function in 4.17-rc6.
[akpm@linux-foundation.org: don't shadow outer local `ret' in __do_huge_pmd_anonymous_page()]
Link: http://lkml.kernel.org/r/20180604171727.GA20279@jordon-HP-15-Notebook-PC
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Almost all files in the kernel are either plain text or UTF-8 encoded. A
couple however are ISO_8859-1, usually just a few characters in a C
comments, for historic reasons.
This converts them all to UTF-8 for consistency.
Link: http://lkml.kernel.org/r/20180724111600.4158975-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Simon Horman <horms@verge.net.au> [IPVS portion]
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [IIO]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Acked-by: Rob Herring <robh@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Disallows open of FIFOs or regular files not owned by the user in world
writable sticky directories, unless the owner is the same as that of the
directory or the file is opened without the O_CREAT flag. The purpose
is to make data spoofing attacks harder. This protection can be turned
on and off separately for FIFOs and regular files via sysctl, just like
the symlinks/hardlinks protection. This patch is based on Openwall's
"HARDEN_FIFO" feature by Solar Designer.
This is a brief list of old vulnerabilities that could have been prevented
by this feature, some of them even allow for privilege escalation:
CVE-2000-1134
CVE-2007-3852
CVE-2008-0525
CVE-2009-0416
CVE-2011-4834
CVE-2015-1838
CVE-2015-7442
CVE-2016-7489
This list is not meant to be complete. It's difficult to track down all
vulnerabilities of this kind because they were often reported without any
mention of this particular attack vector. In fact, before
hardlinks/symlinks restrictions, fifos/regular files weren't the favorite
vehicle to exploit them.
[s.mesoraca16@gmail.com: fix bug reported by Dan Carpenter]
Link: https://lkml.kernel.org/r/20180426081456.GA7060@mwanda
Link: http://lkml.kernel.org/r/1524829819-11275-1-git-send-email-s.mesoraca16@gmail.com
[keescook@chromium.org: drop pr_warn_ratelimited() in favor of audit changes in the future]
[keescook@chromium.org: adjust commit subjet]
Link: http://lkml.kernel.org/r/20180416175918.GA13494@beast
Signed-off-by: Salvatore Mesoraca <s.mesoraca16@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Suggested-by: Solar Designer <solar@openwall.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- add support for deferred console takeover, when enabled defers
fbcon taking over the console from the dummy console until the
first text is displayed on the console - together with the "quiet"
kernel commandline option this allows fbcon to still be used
together with a smooth graphical bootup (Hans de Goede)
- improve console locking debugging code (Thomas Zimmermann)
- copy the ACPI BGRT boot graphics to the framebuffer when deferred
console takeover support is used in efifb driver (Hans de Goede)
- update udlfb driver - fix lost console when the user unplugs a USB
adapter, fix the screen corruption issue, fix locking and add some
performance optimizations (Mikulas Patocka)
- update pxafb driver - fix using uninitialized memory, switch to
devm_* API, handle initialization errors and add support for
lcd-supply regulator (Daniel Mack)
- add support for boards booted with a DeviceTree in pxa3xx_gcu
driver (Daniel Mack)
- rename omap2 module to omap2fb.ko to avoid conflicts with omap1
driver (Arnd Bergmann)
- enable ACPI-based enumeration for goldfishfb driver (Yu Ning)
- fix goldfishfb driver to make user space Android code use 60 fps
(Christoffer Dall)
- print big fat warning when nomodeset kernel parameter is used in
vgacon driver (Lyude Paul)
- remove VLA usage from fsl-diu-fb driver (Kees Cook)
- misc fixes (Julia Lawall, Geert Uytterhoeven, Fredrik Noring,
Yisheng Xie, Dan Carpenter, Daniel Vetter, Anton Vasilyev, Randy
Dunlap, Gustavo A. R. Silva, Colin Ian King, Fengguang Wu)
- misc cleanups (Roman Kiryanov, Yisheng Xie, Colin Ian King)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=7UE9
-----END PGP SIGNATURE-----
Merge tag 'fbdev-v4.19' of https://github.com/bzolnier/linux
Pull fbdev updates from Bartlomiej Zolnierkiewicz:
"Mostly small fixes and cleanups for fb drivers (the biggest updates
are for udlfb and pxafb drivers). This also adds deferred console
takeover support to the console code and efifb driver.
Summary:
- add support for deferred console takeover, when enabled defers
fbcon taking over the console from the dummy console until the
first text is displayed on the console - together with the "quiet"
kernel commandline option this allows fbcon to still be used
together with a smooth graphical bootup (Hans de Goede)
- improve console locking debugging code (Thomas Zimmermann)
- copy the ACPI BGRT boot graphics to the framebuffer when deferred
console takeover support is used in efifb driver (Hans de Goede)
- update udlfb driver - fix lost console when the user unplugs a USB
adapter, fix the screen corruption issue, fix locking and add some
performance optimizations (Mikulas Patocka)
- update pxafb driver - fix using uninitialized memory, switch to
devm_* API, handle initialization errors and add support for
lcd-supply regulator (Daniel Mack)
- add support for boards booted with a DeviceTree in pxa3xx_gcu
driver (Daniel Mack)
- rename omap2 module to omap2fb.ko to avoid conflicts with omap1
driver (Arnd Bergmann)
- enable ACPI-based enumeration for goldfishfb driver (Yu Ning)
- fix goldfishfb driver to make user space Android code use 60 fps
(Christoffer Dall)
- print big fat warning when nomodeset kernel parameter is used in
vgacon driver (Lyude Paul)
- remove VLA usage from fsl-diu-fb driver (Kees Cook)
- misc fixes (Julia Lawall, Geert Uytterhoeven, Fredrik Noring,
Yisheng Xie, Dan Carpenter, Daniel Vetter, Anton Vasilyev, Randy
Dunlap, Gustavo A. R. Silva, Colin Ian King, Fengguang Wu)
- misc cleanups (Roman Kiryanov, Yisheng Xie, Colin Ian King)"
* tag 'fbdev-v4.19' of https://github.com/bzolnier/linux: (54 commits)
Documentation/fb: corrections for fbcon.txt
fbcon: Do not takeover the console from atomic context
dummycon: Stop exporting dummycon_[un]register_output_notifier
fbcon: Only defer console takeover if the current console driver is the dummycon
fbcon: Only allow FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER if fbdev is builtin
fbdev: omap2: omapfb: fix ifnullfree.cocci warnings
fbdev: omap2: omapfb: fix bugon.cocci warnings
fbdev: omap2: omapfb: fix boolreturn.cocci warnings
fb: amifb: fix build warnings when not builtin
fbdev/core: Disable console-lock warnings when fb.lockless_register_fb is set
console: Replace #if 0 with atomic var 'ignore_console_lock_warning'
udlfb: use spin_lock_irq instead of spin_lock_irqsave
udlfb: avoid prefetch
udlfb: optimization - test the backing buffer
udlfb: allow reallocating the framebuffer
udlfb: set line_length in dlfb_ops_set_par
udlfb: handle allocation failure
udlfb: set optimal write delay
udlfb: make a local copy of fb_ops
udlfb: don't switch if we are switching to the same videomode
...
from being traced by kprobes. During my testing, I found that there's places
that we may want to add kprobes to notrace, thus we may end up changing this
code before 4.19 is released. The history behind this change is that we
found that adding kprobes to various notrace functions caused the kernel to
crashed. We took the safe route and decided not to allow kprobes to trace
any notrace function. But because notrace is added to functions that just
cause weird side effects to the function tracer, but are still safe,
preventing kprobes for all notrace functios may be too much of a big hammer.
One such place is __schedule() is marked notrace, to keep function tracer
from doing strange recursive loops when it gets traced with NEED_RESCHED
set. With this change, one can not add kprobes to the scheduler.
Masami also added code to use gcov on ftrace.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW34RpBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhwzAQDITRob1VjOF8RavMbfBZZuhwHPQROF
XsIFcD+jghFOUgEA1zXX4w+SwOV7S+chpGKMh3DlNKIbYPA+8eiMNFfDsA4=
=u+oq
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Masami found an off by one bug in the code that keeps "notrace"
functions from being traced by kprobes. During my testing, I found
that there's places that we may want to add kprobes to notrace, thus
we may end up changing this code before 4.19 is released.
The history behind this change is that we found that adding kprobes to
various notrace functions caused the kernel to crashed. We took the
safe route and decided not to allow kprobes to trace any notrace
function.
But because notrace is added to functions that just cause weird side
effects to the function tracer, but are still safe, preventing kprobes
for all notrace functios may be too much of a big hammer.
One such place is __schedule() is marked notrace, to keep function
tracer from doing strange recursive loops when it gets traced with
NEED_RESCHED set. With this change, one can not add kprobes to the
scheduler.
Masami also added code to use gcov on ftrace"
* tag 'trace-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/kprobes: Fix to check notrace function with correct range
tracing: Allow gcov profiling on only ftrace subsystem
All BPF hash and LRU maps currently have a known and global seed
we feed into jhash() which is 0. This is suboptimal, thus fix it
by generating a random seed upon hashtab setup time which we can
later on feed into jhash() on lookup, update and deletions.
Fixes: 0f8e4bd8a1 ("bpf: add hashtable type of eBPF maps")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Eduardo Valentin <eduval@amazon.com>
-----BEGIN PGP SIGNATURE-----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=FS7e
-----END PGP SIGNATURE-----
Merge tag 'for-4.19/post-20180822' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
- Set of bcache fixes and changes (Coly)
- The flush warn fix (me)
- Small series of BFQ fixes (Paolo)
- wbt hang fix (Ming)
- blktrace fix (Steven)
- blk-mq hardware queue count update fix (Jianchao)
- Various little fixes
* tag 'for-4.19/post-20180822' of git://git.kernel.dk/linux-block: (31 commits)
block/DAC960.c: make some arrays static const, shrinks object size
blk-mq: sync the update nr_hw_queues with blk_mq_queue_tag_busy_iter
blk-mq: init hctx sched after update ctx and hctx mapping
block: remove duplicate initialization
tracing/blktrace: Fix to allow setting same value
pktcdvd: fix setting of 'ret' error return for a few cases
block: change return type to bool
block, bfq: return nbytes and not zero from struct cftype .write() method
block, bfq: improve code of bfq_bfqq_charge_time
block, bfq: reduce write overcharge
block, bfq: always update the budget of an entity when needed
block, bfq: readd missing reset of parent-entity service
blk-wbt: fix IO hang in wbt_wait()
block: don't warn for flush on read-only device
bcache: add the missing comments for smp_mb()/smp_wmb()
bcache: remove unnecessary space before ioctl function pointer arguments
bcache: add missing SPDX header
bcache: move open brace at end of function definitions to next line
bcache: add static const prefix to char * array declarations
bcache: fix code comments style
...
When sockmap code is using the stream parser it also handles the write
space events in order to handle the case where (a) verdict redirects
skb to another socket and (b) the sockmap then sends the skb but due
to memory constraints (or other EAGAIN errors) needs to do a retry.
But the initial code missed a third case where the
skb_send_sock_locked() triggers an sk_wait_event(). A typically case
would be when sndbuf size is exceeded. If this happens because we
do not pass the write_space event to the lower layers we never wake
up the event and it will wait for sndtimeo. Which as noted in ktls
fix may be rather large and look like a hang to the user.
To reproduce the best test is to reduce the sndbuf size and send
1B data chunks to stress the memory handling. To fix this pass the
event from the upper layer to the lower layer.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Merge more updates from Andrew Morton:
- the rest of MM
- procfs updates
- various misc things
- more y2038 fixes
- get_maintainer updates
- lib/ updates
- checkpatch updates
- various epoll updates
- autofs updates
- hfsplus
- some reiserfs work
- fatfs updates
- signal.c cleanups
- ipc/ updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (166 commits)
ipc/util.c: update return value of ipc_getref from int to bool
ipc/util.c: further variable name cleanups
ipc: simplify ipc initialization
ipc: get rid of ids->tables_initialized hack
lib/rhashtable: guarantee initial hashtable allocation
lib/rhashtable: simplify bucket_table_alloc()
ipc: drop ipc_lock()
ipc/util.c: correct comment in ipc_obtain_object_check
ipc: rename ipcctl_pre_down_nolock()
ipc/util.c: use ipc_rcu_putref() for failues in ipc_addid()
ipc: reorganize initialization of kern_ipc_perm.seq
ipc: compute kern_ipc_perm.id under the ipc lock
init/Kconfig: remove EXPERT from CHECKPOINT_RESTORE
fs/sysv/inode.c: use ktime_get_real_seconds() for superblock stamp
adfs: use timespec64 for time conversion
kernel/sysctl.c: fix typos in comments
drivers/rapidio/devices/rio_mport_cdev.c: remove redundant pointer md
fork: don't copy inconsistent signal handler state to child
signal: make get_signal() return bool
signal: make sigkill_pending() return bool
...
When we try to allocate a new sock hash entry and the allocation
fails, then sock hash map fails to reduce the map element counter,
meaning we keep accounting this element although it was never used.
Fix it by dropping the element counter on error.
Fixes: 8111038444 ("bpf: sockmap, add hash map support")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Currently, it is possible to create a sock hash map with key size
of 0 and have the kernel return a fd back to user space. This is
invalid for hash maps (and kernel also hasn't been tested for zero
key size support in general at this point). Thus, reject such
configuration.
Fixes: 8111038444 ("bpf: sockmap, add hash map support")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Fix a few typos/spellos in kernel/sysctl.c.
Link: http://lkml.kernel.org/r/bb09a8b9-f984-6dd4-b07b-3ecaf200862e@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: "Luis R. Rodriguez" <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Before this change, if a multithreaded process forks while one of its
threads is changing a signal handler using sigaction(), the memcpy() in
copy_sighand() can race with the struct assignment in do_sigaction(). It
isn't clear whether this can cause corruption of the userspace signal
handler pointer, but it definitely can cause inconsistency between
different fields of struct sigaction.
Take the appropriate spinlock to avoid this.
I have tested that this patch prevents inconsistency between sa_sigaction
and sa_flags, which is possible before this patch.
Link: http://lkml.kernel.org/r/20180702145108.73189-1-jannh@google.com
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
make get_signal() already behaves like a boolean function. Let's actually
declare it as such too.
Link: http://lkml.kernel.org/r/20180602103653.18181-18-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Morris <james.morris@microsoft.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sigkill_pending() already behaves like a boolean function. Let's actually
declare it as such too.
Link: http://lkml.kernel.org/r/20180602103653.18181-17-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Morris <james.morris@microsoft.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
legacy_queue() already behaves like a boolean function. Let's actually
declare it as such too.
Link: http://lkml.kernel.org/r/20180602103653.18181-16-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Morris <james.morris@microsoft.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
wants_signal() already behaves like a boolean function. Let's actually
declare it as such too.
Link: http://lkml.kernel.org/r/20180602103653.18181-15-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Morris <james.morris@microsoft.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The return value of flush_sigqueue_mask() is never checked anywhere.
Link: http://lkml.kernel.org/r/20180602103653.18181-14-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Morris <james.morris@microsoft.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
unhandled_signal() already behaves like a boolean function. Let's
actually declare it as such too. All callers treat it as such too.
Link: http://lkml.kernel.org/r/20180602103653.18181-13-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Morris <james.morris@microsoft.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
recalc_sigpending_tsk() already behaves like a boolean function. Let's
actually declare it as such too.
Link: http://lkml.kernel.org/r/20180602103653.18181-12-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Morris <james.morris@microsoft.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
has_pending_signals() already behaves like a boolean function. Let's
actually declare it as such too.
Link: http://lkml.kernel.org/r/20180602103653.18181-11-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Morris <james.morris@microsoft.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sig_ignored() already behaves like a boolean function. Let's actually
declare it as such too.
Link: http://lkml.kernel.org/r/20180602103653.18181-10-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Morris <james.morris@microsoft.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sig_task_ignored() already behaves like a boolean function. Let's
actually declare it as such too.
Link: http://lkml.kernel.org/r/20180602103653.18181-9-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Morris <james.morris@microsoft.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sig_handler_ignored() already behaves like a boolean function. Let's
actually declare it as such too.
Link: http://lkml.kernel.org/r/20180602103653.18181-8-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Morris <james.morris@microsoft.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kill_ok_by_cred() already behaves like a boolean function. Let's actually
declare it as such too.
Link: http://lkml.kernel.org/r/20180602103653.18181-7-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Morris <james.morris@microsoft.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The goto is not needed and does not add any clarity. Simply return
-EINVAL on unexpected sigset_t struct size directly.
Link: http://lkml.kernel.org/r/20180602103653.18181-6-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Morris <james.morris@microsoft.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
do_sigpending() returned 0 unconditionally so it doesn't make sense to
have it return at all. This allows us to simplify a bunch of syscall
callers.
Link: http://lkml.kernel.org/r/20180602103653.18181-5-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Morris <james.morris@microsoft.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
may_ptrace_stop() already behaves like a boolean function. Let's actually
declare it as such too.
Link: http://lkml.kernel.org/r/20180602103653.18181-4-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Morris <james.morris@microsoft.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kill_as_cred_perm() already behaves like a boolean function. Let's
actually declare it as such too.
Link: http://lkml.kernel.org/r/20180602103653.18181-3-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Morris <james.morris@microsoft.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "signal: refactor some functions", v3.
This series refactors a bunch of functions in signal.c to simplify parts
of the code.
The greatest single change is declaring the static do_sigpending() helper
as void which makes it possible to remove a bunch of unnecessary checks in
the syscalls later on.
This patch (of 17):
force_sigsegv() returned 0 unconditionally so it doesn't make sense to have
it return at all. In addition, there are no callers that check
force_sigsegv()'s return value.
Link: http://lkml.kernel.org/r/20180602103653.18181-2-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Morris <james.morris@microsoft.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Better ensure we actually hold the lock using lockdep than just commenting
on it. Due to the various exported _locked interfaces it is far too easy
to get the locking wrong.
Link: http://lkml.kernel.org/r/20171214152344.6880-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To avoid the need for relocating absolute references to tracepoint
structures at boot time when running relocatable kernels (which may
take a disproportionate amount of space), add the option to emit
these tables as relative references instead.
Link: http://lkml.kernel.org/r/20180704083651.24360-7-ard.biesheuvel@linaro.org
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morris <james.morris@microsoft.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow the initcall tables to be emitted using relative references that
are only half the size on 64-bit architectures and don't require fixups
at runtime on relocatable kernels.
Link: http://lkml.kernel.org/r/20180704083651.24360-5-ard.biesheuvel@linaro.org
Acked-by: James Morris <james.morris@microsoft.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
An ordinary arm64 defconfig build has ~64 KB worth of __ksymtab entries,
each consisting of two 64-bit fields containing absolute references, to
the symbol itself and to a char array containing its name, respectively.
When we build the same configuration with KASLR enabled, we end up with an
additional ~192 KB of relocations in the .init section, i.e., one 24 byte
entry for each absolute reference, which all need to be processed at boot
time.
Given how the struct kernel_symbol that describes each entry is completely
local to module.c (except for the references emitted by EXPORT_SYMBOL()
itself), we can easily modify it to contain two 32-bit relative references
instead. This reduces the size of the __ksymtab section by 50% for all
64-bit architectures, and gets rid of the runtime relocations entirely for
architectures implementing KASLR, either via standard PIE linking (arm64)
or using custom host tools (x86).
Note that the binary search involving __ksymtab contents relies on each
section being sorted by symbol name. This is implemented based on the
input section names, not the names in the ksymtab entries, so this patch
does not interfere with that.
Given that the use of place-relative relocations requires support both in
the toolchain and in the module loader, we cannot enable this feature for
all architectures. So make it dependent on whether
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS is defined.
Link: http://lkml.kernel.org/r/20180704083651.24360-4-ard.biesheuvel@linaro.org
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morris <james.morris@microsoft.com>
Cc: James Morris <jmorris@namei.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently task hung checking interval is equal to timeout, as the result
hung is detected anywhere between timeout and 2*timeout. This is fine for
most interactive environments, but this hurts automated testing setups
(syzbot). In an automated setup we need to strictly order CPU lockup <
RCU stall < workqueue lockup < task hung < silent loss, so that RCU stall
is not detected as task hung and task hung is not detected as silent
machine loss. The large variance in task hung detection timeout requires
setting silent machine loss timeout to a very large value (e.g. if task
hung is 3 mins, then silent loss need to be set to ~7 mins). The
additional 3 minutes significantly reduce testing efficiency because
usually we crash kernel within a minute, and this can add hours to bug
localization process as it needs to do dozens of tests.
Allow setting checking interval separately from timeout. This allows to
set timeout to, say, 3 minutes, but checking interval to 10 secs.
The interval is controlled via a new hung_task_check_interval_secs sysctl,
similar to the existing hung_task_timeout_secs sysctl. The default value
of 0 results in the current behavior: checking interval is equal to
timeout.
[akpm@linux-foundation.org: update hung_task_timeout_max's comment]
Link: http://lkml.kernel.org/r/20180611111004.203513-1-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The get_seconds() call returns a 32-bit timestamp on some architectures,
and will overflow in the future. The newer ktime_get_real_seconds()
always returns a 64-bit timestamp that does not suffer from this problem.
Link: http://lkml.kernel.org/r/20180618150329.941903-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Petr Tesarik <ptesarik@suse.cz>
Cc: Marc-Andr Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The irqsave variant of refcount_dec_and_lock handles irqsave/restore when
taking/releasing the spin lock. With this variant the call of
local_irq_save/restore is no longer required.
[bigeasy@linutronix.de: s@atomic_dec_and_lock@refcount_dec_and_lock@g]
Link: http://lkml.kernel.org/r/20180703200141.28415-7-bigeasy@linutronix.de
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
refcount_t type and corresponding API should be used instead of atomic_t
wh en the variable is used as a reference counter. This avoids accidental
refcounter overflows that might lead to use-after-free situations.
Link: http://lkml.kernel.org/r/20180703200141.28415-6-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The vmcoreinfo information is useful for runtime debugging tools, not just
for crash dumps. A lot of this information can be determined by other
means, but this is much more convenient, and it only adds a page at most
to the file.
Link: http://lkml.kernel.org/r/fddbcd08eed76344863303878b12de1c1e2a04b6.1531953780.git.osandov@fb.com
Signed-off-by: Omar Sandoval <osandov@fb.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is preparation for allowing CRASH_CORE to be enabled for any
architecture.
swapper_pg_dir is always either an array or a macro expanding to NULL.
In the latter case, VMCOREINFO_SYMBOL() won't work, as it tries to take
the address of the given symbol:
#define VMCOREINFO_SYMBOL(name) \
vmcoreinfo_append_str("SYMBOL(%s)=%lx\n", #name, (unsigned long)&name)
Instead, use VMCOREINFO_SYMBOL_ARRAY(), which uses the value:
#define VMCOREINFO_SYMBOL_ARRAY(name) \
vmcoreinfo_append_str("SYMBOL(%s)=%lx\n", #name, (unsigned long)name)
This is the same thing for the array case but isn't an error for the macro
case.
Link: http://lkml.kernel.org/r/c05f9781ec204f40fc96f95086e7b6de6a3eb2c3.1532563124.git.osandov@fb.com
Signed-off-by: Omar Sandoval <osandov@fb.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rather than in vm_area_alloc(). To ensure that the various oddball
stack-based vmas are in a good state. Some of the callers were zeroing
them out, others were not.
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In flush_work(), we need to create a lockdep dependency so that
the following scenario is appropriately tagged as a problem:
work_function()
{
mutex_lock(&mutex);
...
}
other_function()
{
mutex_lock(&mutex);
flush_work(&work); // or cancel_work_sync(&work);
}
This is a problem since the work might be running and be blocked
on trying to acquire the mutex.
Similarly, in flush_workqueue().
These were removed after cross-release partially caught these
problems, but now cross-release was reverted anyway. IMHO the
removal was erroneous anyway though, since lockdep should be
able to catch potential problems, not just actual ones, and
cross-release would only have caught the problem when actually
invoking wait_for_completion().
Fixes: fd1a5b04df ("workqueue: Remove now redundant lock acquisitions wrt. workqueue flushes")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
In cancel_work_sync(), we can only have one of two cases, even
with an ordered workqueue:
* the work isn't running, just cancelled before it started
* the work is running, but then nothing else can be on the
workqueue before it
Thus, we need to skip the lockdep workqueue dependency handling,
otherwise we get false positive reports from lockdep saying that
we have a potential deadlock when the workqueue also has other
work items with locking, e.g.
work1_function() { mutex_lock(&mutex); ... }
work2_function() { /* nothing */ }
other_function() {
queue_work(ordered_wq, &work1);
queue_work(ordered_wq, &work2);
mutex_lock(&mutex);
cancel_work_sync(&work2);
}
As described above, this isn't a problem, but lockdep will
currently flag it as if cancel_work_sync() was flush_work(),
which *is* a problem.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
- Make the idle loop handle stopped scheduler tick correctly (Rafael
Wysocki).
- Prevent the menu cpuidle governor from letting CPUs spend too much
time in shallow idle states when it is invoked with scheduler tick
stopped and clean it up somewhat (Rafael Wysocki).
- Avoid invoking the platform firmware to make the platform enter
the ACPI S3 sleep state with suspended PCIe root ports which may
confuse the firmware and cause it to crash (Rafael Wysocki).
- Fix sysfs-related race in the ondemand and conservative cpufreq
governors which may cause the system to crash if the governor
module is removed during an update of CPU frequency limits (Henry
Willard).
- Select SRCU when building the system wakeup framework to avoid a
build issue in it (zhangyi).
- Make the descriptions of ACPI C-states vendor-neutral to avoid
confusion (Prarit Bhargava).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=9GrU
-----END PGP SIGNATURE-----
Merge tag 'pm-4.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These fix the main idle loop and the menu cpuidle governor, clean up
the latter, fix a mistake in the PCI bus type's support for system
suspend and resume, fix the ondemand and conservative cpufreq
governors, address a build issue in the system wakeup framework and
make the ACPI C-states desciptions less confusing.
Specifics:
- Make the idle loop handle stopped scheduler tick correctly (Rafael
Wysocki).
- Prevent the menu cpuidle governor from letting CPUs spend too much
time in shallow idle states when it is invoked with scheduler tick
stopped and clean it up somewhat (Rafael Wysocki).
- Avoid invoking the platform firmware to make the platform enter the
ACPI S3 sleep state with suspended PCIe root ports which may
confuse the firmware and cause it to crash (Rafael Wysocki).
- Fix sysfs-related race in the ondemand and conservative cpufreq
governors which may cause the system to crash if the governor
module is removed during an update of CPU frequency limits (Henry
Willard).
- Select SRCU when building the system wakeup framework to avoid a
build issue in it (zhangyi).
- Make the descriptions of ACPI C-states vendor-neutral to avoid
confusion (Prarit Bhargava)"
* tag 'pm-4.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: menu: Handle stopped tick more aggressively
sched: idle: Avoid retaining the tick when it has been stopped
PCI / ACPI / PM: Resume all bridges on suspend-to-RAM
cpuidle: menu: Update stale polling override comment
cpufreq: governor: Avoid accessing invalid governor_data
x86/ACPI/cstate: Make APCI C1 FFH MWAIT C-state description vendor-neutral
cpuidle: menu: Fix white space
PM / sleep: wakeup: Fix build error caused by missing SRCU support
Pull core signal handling updates from Eric Biederman:
"It was observed that a periodic timer in combination with a
sufficiently expensive fork could prevent fork from every completing.
This contains the changes to remove the need for that restart.
This set of changes is split into several parts:
- The first part makes PIDTYPE_TGID a proper pid type instead
something only for very special cases. The part starts using
PIDTYPE_TGID enough so that in __send_signal where signals are
actually delivered we know if the signal is being sent to a a group
of processes or just a single process.
- With that prep work out of the way the logic in fork is modified so
that fork logically makes signals received while it is running
appear to be received after the fork completes"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (22 commits)
signal: Don't send signals to tasks that don't exist
signal: Don't restart fork when signals come in.
fork: Have new threads join on-going signal group stops
fork: Skip setting TIF_SIGPENDING in ptrace_init_task
signal: Add calculate_sigpending()
fork: Unconditionally exit if a fatal signal is pending
fork: Move and describe why the code examines PIDNS_ADDING
signal: Push pid type down into complete_signal.
signal: Push pid type down into __send_signal
signal: Push pid type down into send_signal
signal: Pass pid type into do_send_sig_info
signal: Pass pid type into send_sigio_to_task & send_sigurg_to_task
signal: Pass pid type into group_send_sig_info
signal: Pass pid and pid type into send_sigqueue
posix-timers: Noralize good_sigevent
signal: Use PIDTYPE_TGID to clearly store where file signals will be sent
pid: Implement PIDTYPE_TGID
pids: Move the pgrp and session pid pointers from task_struct to signal_struct
kvm: Don't open code task_pid in kvm_vcpu_ioctl
pids: Compute task_tgid using signal->leader_pid
...
Merge fixes for the ondemand and conservative cpufreq governors,
PCI power management and system wakeup framework.
* pm-cpufreq:
cpufreq: governor: Avoid accessing invalid governor_data
* pm-pci:
PCI / ACPI / PM: Resume all bridges on suspend-to-RAM
* pm-sleep:
PM / sleep: wakeup: Fix build error caused by missing SRCU support
Fix within_notrace_func() to check notrace function correctly.
Since the ftrace_location_range(start, end) function checks
the range inclusively (start <= ftrace-loc <= end), the end
address must not include the entry address of next function.
However, within_notrace_func() uses kallsyms_lookup_size_offset()
to get the function size and calculate the end address from
adding the size to the entry address. This means the end address
is the entry address of the next function.
In the result, within_notrace_func() fails to find notrace
function if the next function of the target function is
ftraced.
Let's subtract 1 from the end address so that ftrace_location_range()
can check it correctly.
Link: http://lkml.kernel.org/r/153485669706.16611.17726752296213785504.stgit@devbox
Fixes: commit 45408c4f92 ("tracing: kprobes: Prohibit probing on notrace function")
Reported-by: Michael Rodin <michael@rodin.online>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add GCOV_PROFILE_FTRACE to allow gcov profiling on only files in ftrace
subsystem. This config option will be used for checking kselftest/ftrace
coverage.
Link: http://lkml.kernel.org/r/153483647755.32472.4746349899604275441.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- Restructure of lockdep and latency tracers
This is the biggest change. Joel Fernandes restructured the hooks
from irqs and preemption disabling and enabling. He got rid of
a lot of the preprocessor #ifdef mess that they caused.
He turned both lockdep and the latency tracers to use trace events
inserted in the preempt/irqs disabling paths. But unfortunately,
these started to cause issues in corner cases. Thus, parts of the
code was reverted back to where lockde and the latency tracers
just get called directly (without using the trace events).
But because the original change cleaned up the code very nicely
we kept that, as well as the trace events for preempt and irqs
disabling, but they are limited to not being called in NMIs.
- Have trace events use SRCU for "rcu idle" calls. This was required
for the preempt/irqs off trace events. But it also had to not
allow them to be called in NMI context. Waiting till Paul makes
an NMI safe SRCU API.
- New notrace SRCU API to allow trace events to use SRCU.
- Addition of mcount-nop option support
- SPDX headers replacing GPL templates.
- Various other fixes and clean ups.
- Some fixes are marked for stable, but were not fully tested
before the merge window opened.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW3ruhRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qiM7AP47NhYdSnCFCRUJfrt6PovXmQtuCHt3
c3QMoGGdvzh9YAEAqcSXwh7uLhpHUp1LjMAPkXdZVwNddf4zJQ1zyxQ+EAU=
=vgEr
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Restructure of lockdep and latency tracers
This is the biggest change. Joel Fernandes restructured the hooks
from irqs and preemption disabling and enabling. He got rid of a lot
of the preprocessor #ifdef mess that they caused.
He turned both lockdep and the latency tracers to use trace events
inserted in the preempt/irqs disabling paths. But unfortunately,
these started to cause issues in corner cases. Thus, parts of the
code was reverted back to where lockdep and the latency tracers just
get called directly (without using the trace events). But because the
original change cleaned up the code very nicely we kept that, as well
as the trace events for preempt and irqs disabling, but they are
limited to not being called in NMIs.
- Have trace events use SRCU for "rcu idle" calls. This was required
for the preempt/irqs off trace events. But it also had to not allow
them to be called in NMI context. Waiting till Paul makes an NMI safe
SRCU API.
- New notrace SRCU API to allow trace events to use SRCU.
- Addition of mcount-nop option support
- SPDX headers replacing GPL templates.
- Various other fixes and clean ups.
- Some fixes are marked for stable, but were not fully tested before
the merge window opened.
* tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
tracing: Fix SPDX format headers to use C++ style comments
tracing: Add SPDX License format tags to tracing files
tracing: Add SPDX License format to bpf_trace.c
blktrace: Add SPDX License format header
s390/ftrace: Add -mfentry and -mnop-mcount support
tracing: Add -mcount-nop option support
tracing: Avoid calling cc-option -mrecord-mcount for every Makefile
tracing: Handle CC_FLAGS_FTRACE more accurately
Uprobe: Additional argument arch_uprobe to uprobe_write_opcode()
Uprobes: Simplify uprobe_register() body
tracepoints: Free early tracepoints after RCU is initialized
uprobes: Use synchronize_rcu() not synchronize_sched()
tracing: Fix synchronizing to event changes with tracepoint_synchronize_unregister()
ftrace: Remove unused pointer ftrace_swapper_pid
tracing: More reverting of "tracing: Centralize preemptirq tracepoints and unify their usage"
tracing/irqsoff: Handle preempt_count for different configs
tracing: Partial revert of "tracing: Centralize preemptirq tracepoints and unify their usage"
tracing: irqsoff: Account for additional preempt_disable
trace: Use rcu_dereference_raw for hooks from trace-event subsystem
tracing/kprobes: Fix within_notrace_func() to check only notrace functions
...
In preparation of enabling -Wimplicit-fallthrough, mark switch cases which
fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <dvhart@infradead.org>
Link: https://lkml.kernel.org/r/20180816172124.GA2407@embeddedor.com
If the tick has been stopped already, but the governor has not asked to
stop it (which it can do sometimes), the idle loop should invoke
tick_nohz_idle_stop_tick(), to let tick_nohz_stop_tick() take care
of this case properly.
Fixes: 554c8aa8ec (sched: idle: Select idle state before stopping the tick)
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull networking fixes from David Miller:
1) Fix races in IPVS, from Tan Hu.
2) Missing unbind in matchall classifier, from Hangbin Liu.
3) Missing act_ife action release, from Vlad Buslov.
4) Cure lockdep splats in ila, from Cong Wang.
5) veth queue leak on link delete, from Toshiaki Makita.
6) Disable isdn's IIOCDBGVAR ioctl, it exposes kernel addresses. From
Kees Cook.
7) RCU usage fixup in XDP, from Tariq Toukan.
8) Two TCP ULP fixes from Daniel Borkmann.
9) r8169 needs REALTEK_PHY as a Kconfig dependency, from Heiner
Kallweit.
10) Always take tcf_lock with BH disabled, otherwise we can deadlock
with rate estimator code paths. From Vlad Buslov.
11) Don't use MSI-X on RTL8106e r8169 chips, they don't resume properly.
From Jian-Hong Pan.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits)
ip6_vti: fix creating fallback tunnel device for vti6
ip_vti: fix a null pointer deferrence when create vti fallback tunnel
r8169: don't use MSI-X on RTL8106e
net: lan743x_ptp: convert to ktime_get_clocktai_ts64
net: sched: always disable bh when taking tcf_lock
ip6_vti: simplify stats handling in vti6_xmit
bpf: fix redirect to map under tail calls
r8169: add missing Kconfig dependency
tools/bpf: fix bpf selftest test_cgroup_storage failure
bpf, sockmap: fix sock_map_ctx_update_elem race with exist/noexist
bpf, sockmap: fix map elem deletion race with smap_stop_sock
bpf, sockmap: fix leakage of smap_psock_map_entry
tcp, ulp: fix leftover icsk_ulp_ops preventing sock from reattach
tcp, ulp: add alias for all ulp modules
bpf: fix a rcu usage warning in bpf_prog_array_copy_core()
samples/bpf: all XDP samples should unload xdp/bpf prog on SIGTERM
net/xdp: Fix suspicious RCU usage warning
net/mlx5e: Delete unneeded function argument
Documentation: networking: ti-cpsw: correct cbs parameters for Eth1 100Mb
isdn: Disable IIOCDBGVAR
...
Daniel Borkmann says:
====================
pull-request: bpf 2018-08-18
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a BPF selftest failure in test_cgroup_storage due to rlimit
restrictions, from Yonghong.
2) Fix a suspicious RCU rcu_dereference_check() warning triggered
from removing a device's XDP memory allocator by using the correct
rhashtable lookup function, from Tariq.
3) A batch of BPF sockmap and ULP fixes mainly fixing leaks and races
as well as enforcing module aliases for ULPs. Another fix for BPF
map redirect to make them work again with tail calls, from Daniel.
4) Fix XDP BPF samples to unload their programs upon SIGTERM, from Jesper.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge updates from Andrew Morton:
- a few misc things
- a few Y2038 fixes
- ntfs fixes
- arch/sh tweaks
- ocfs2 updates
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (111 commits)
mm/hmm.c: remove unused variables align_start and align_end
fs/userfaultfd.c: remove redundant pointer uwq
mm, vmacache: hash addresses based on pmd
mm/list_lru: introduce list_lru_shrink_walk_irq()
mm/list_lru.c: pass struct list_lru_node* as an argument to __list_lru_walk_one()
mm/list_lru.c: move locking from __list_lru_walk_one() to its caller
mm/list_lru.c: use list_lru_walk_one() in list_lru_walk_node()
mm, swap: make CONFIG_THP_SWAP depend on CONFIG_SWAP
mm/sparse: delete old sparse_init and enable new one
mm/sparse: add new sparse_init_nid() and sparse_init()
mm/sparse: move buffer init/fini to the common place
mm/sparse: use the new sparse buffer functions in non-vmemmap
mm/sparse: abstract sparse buffer allocations
mm/hugetlb.c: don't zero 1GiB bootmem pages
mm, page_alloc: double zone's batchsize
mm/oom_kill.c: document oom_lock
mm/hugetlb: remove gigantic page support for HIGHMEM
mm, oom: remove sleep from under oom_lock
kernel/dma: remove unsupported gfp_mask parameter from dma_alloc_from_contiguous()
mm/cma: remove unsupported gfp_mask parameter from cma_alloc()
...
The CMA memory allocator doesn't support standard gfp flags for memory
allocation, so there is no point having it as a parameter for
dma_alloc_from_contiguous() function. Replace it by a boolean no_warn
argument, which covers all the underlaying cma_alloc() function
supports.
This will help to avoid giving false feeling that this function supports
standard gfp flags and callers can pass __GFP_ZERO to get zeroed buffer,
what has already been an issue: see commit dd65a941f6 ("arm64:
dma-mapping: clear buffers allocated with FORCE_CONTIGUOUS flag").
Link: http://lkml.kernel.org/r/20180709122020eucas1p21a71b092975cb4a3b9954ffc63f699d1~-sqUFoa-h2939329393eucas1p2Y@eucas1p2.samsung.com
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Michał Nazarewicz <mina86@mina86.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
cma_alloc() doesn't really support gfp flags other than __GFP_NOWARN, so
convert gfp_mask parameter to boolean no_warn parameter.
This will help to avoid giving false feeling that this function supports
standard gfp flags and callers can pass __GFP_ZERO to get zeroed buffer,
what has already been an issue: see commit dd65a941f6 ("arm64:
dma-mapping: clear buffers allocated with FORCE_CONTIGUOUS flag").
Link: http://lkml.kernel.org/r/20180709122019eucas1p2340da484acfcc932537e6014f4fd2c29~-sqTPJKij2939229392eucas1p2j@eucas1p2.samsung.com
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michał Nazarewicz <mina86@mina86.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KASAN learns about hotadded memory via the memory hotplug notifier.
devm_memremap_pages() intentionally skips calling memory hotplug
notifiers. So KASAN doesn't know anything about new memory added by
devm_memremap_pages(). This causes a crash when KASAN tries to access
non-existent shadow memory:
BUG: unable to handle kernel paging request at ffffed0078000000
RIP: 0010:check_memory_region+0x82/0x1e0
Call Trace:
memcpy+0x1f/0x50
pmem_do_bvec+0x163/0x720
pmem_make_request+0x305/0xac0
generic_make_request+0x54f/0xcf0
submit_bio+0x9c/0x370
submit_bh_wbc+0x4c7/0x700
block_read_full_page+0x5ef/0x870
do_read_cache_page+0x2b8/0xb30
read_dev_sector+0xbd/0x3f0
read_lba.isra.0+0x277/0x670
efi_partition+0x41a/0x18f0
check_partition+0x30d/0x5e9
rescan_partitions+0x18c/0x840
__blkdev_get+0x859/0x1060
blkdev_get+0x23f/0x810
__device_add_disk+0x9c8/0xde0
pmem_attach_disk+0x9a8/0xf50
nvdimm_bus_probe+0xf3/0x3c0
driver_probe_device+0x493/0xbd0
bus_for_each_drv+0x118/0x1b0
__device_attach+0x1cd/0x2b0
bus_probe_device+0x1ac/0x260
device_add+0x90d/0x1380
nd_async_device_register+0xe/0x50
async_run_entry_fn+0xc3/0x5d0
process_one_work+0xa0a/0x1810
worker_thread+0x87/0xe80
kthread+0x2d7/0x390
ret_from_fork+0x3a/0x50
Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init()
interface to map/unmap kasan_zero_page at requested virtual addresses.
And use it to add/remove the shadow memory for hotplugged/unplugged
device memory.
Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com
Fixes: 41e94a8513 ("add devm_memremap_pages")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Directed kmem charging", v8.
The Linux kernel's memory cgroup allows limiting the memory usage of the
jobs running on the system to provide isolation between the jobs. All
the kernel memory allocated in the context of the job and marked with
__GFP_ACCOUNT will also be included in the memory usage and be limited
by the job's limit.
The kernel memory can only be charged to the memcg of the process in
whose context kernel memory was allocated. However there are cases
where the allocated kernel memory should be charged to the memcg
different from the current processes's memcg. This patch series
contains two such concrete use-cases i.e. fsnotify and buffer_head.
The fsnotify event objects can consume a lot of system memory for large
or unlimited queues if there is either no or slow listener. The events
are allocated in the context of the event producer. However they should
be charged to the event consumer. Similarly the buffer_head objects can
be allocated in a memcg different from the memcg of the page for which
buffer_head objects are being allocated.
To solve this issue, this patch series introduces mechanism to charge
kernel memory to a given memcg. In case of fsnotify events, the memcg
of the consumer can be used for charging and for buffer_head, the memcg
of the page can be charged. For directed charging, the caller can use
the scope API memalloc_[un]use_memcg() to specify the memcg to charge
for all the __GFP_ACCOUNT allocations within the scope.
This patch (of 2):
A lot of memory can be consumed by the events generated for the huge or
unlimited queues if there is either no or slow listener. This can cause
system level memory pressure or OOMs. So, it's better to account the
fsnotify kmem caches to the memcg of the listener.
However the listener can be in a different memcg than the memcg of the
producer and these allocations happen in the context of the event
producer. This patch introduces remote memcg charging API which the
producer can use to charge the allocations to the memcg of the listener.
There are seven fsnotify kmem caches and among them allocations from
dnotify_struct_cache, dnotify_mark_cache, fanotify_mark_cache and
inotify_inode_mark_cachep happens in the context of syscall from the
listener. So, SLAB_ACCOUNT is enough for these caches.
The objects from fsnotify_mark_connector_cachep are not accounted as
they are small compared to the notification mark or events and it is
unclear whom to account connector to since it is shared by all events
attached to the inode.
The allocations from the event caches happen in the context of the event
producer. For such caches we will need to remote charge the allocations
to the listener's memcg. Thus we save the memcg reference in the
fsnotify_group structure of the listener.
This patch has also moved the members of fsnotify_group to keep the size
same, at least for 64 bit build, even with additional member by filling
the holes.
[shakeelb@google.com: use GFP_KERNEL_ACCOUNT rather than open-coding it]
Link: http://lkml.kernel.org/r/20180702215439.211597-1-shakeelb@google.com
Link: http://lkml.kernel.org/r/20180627191250.209150-2-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commits 109980b894 ("bpf: don't select potentially stale ri->map
from buggy xdp progs") and 7c30013133 ("bpf: fix ri->map_owner
pointer on bpf_prog_realloc") tried to mitigate that buggy programs
using bpf_redirect_map() helper call do not leave stale maps behind.
Idea was to add a map_owner cookie into the per CPU struct redirect_info
which was set to prog->aux by the prog making the helper call as a
proof that the map is not stale since the prog is implicitly holding
a reference to it. This owner cookie could later on get compared with
the program calling into BPF whether they match and therefore the
redirect could proceed with processing the map safely.
In (obvious) hindsight, this approach breaks down when tail calls are
involved since the original caller's prog->aux pointer does not have
to match the one from one of the progs out of the tail call chain,
and therefore the xdp buffer will be dropped instead of redirected.
A way around that would be to fix the issue differently (which also
allows to remove related work in fast path at the same time): once
the life-time of a redirect map has come to its end we use it's map
free callback where we need to wait on synchronize_rcu() for current
outstanding xdp buffers and remove such a map pointer from the
redirect info if found to be present. At that time no program is
using this map anymore so we simply invalidate the map pointers to
NULL iff they previously pointed to that instance while making sure
that the redirect path only reads out the map once.
Fixes: 97f91a7cf0 ("bpf: add bpf_redirect_map helper routine")
Fixes: 109980b894 ("bpf: don't select potentially stale ri->map from buggy xdp progs")
Reported-by: Sebastiano Miano <sebastiano.miano@polito.it>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Summary of modules changes for the 4.19 merge window:
- Fix modules kallsyms for livepatch. Livepatch modules can have
SHN_UNDEF symbols in their module symbol tables for later symbol
resolution, but kallsyms shouldn't be returning these symbols
- Some code cleanups and minor reshuffling in load_module() were done to
log the module name when module signature verification fails
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=HzLj
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules updates from Jessica Yu:
"Summary of modules changes for the 4.19 merge window:
- Fix modules kallsyms for livepatch. Livepatch modules can have
SHN_UNDEF symbols in their module symbol tables for later symbol
resolution, but kallsyms shouldn't be returning these symbols
- Some code cleanups and minor reshuffling in load_module() were done
to log the module name when module signature verification fails"
* tag 'modules-for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
kernel/module: Use kmemdup to replace kmalloc+memcpy
ARM: module: fix modsign build error
modsign: log module name in the event of an error
module: replace VMLINUX_SYMBOL_STR() with __stringify() or string literal
module: print sensible error code
module: setup load info before module_sig_check()
module: make it clear when we're handling the module copy in info->hdr
module: exclude SHN_UNDEF symbols from kallsyms api
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAlt2mBQACgkQnJ2qBz9k
QNntGQgAluTTnuJLjoUDjFfT37Fjf2x1ve8rg6xmYS3YIhYTWWA1oazUIeyBDfwa
soutlfAZ/ix2bP1UEmeULxFhrCIXYBbWAe8s5MRqO/7s01QftNf0M72ASmd7gZRy
rSVt2/BWpr745mWI38tEKlIF4sQJVD7IGrnc1cQslPzleeCqsCXA+uBkBPMlcDpJ
ZWni2qK023y9E2dsg6RsJc1HemkQvrJtoLSVqRsdhty9GEuWseMbssdgz1zMXljQ
eXIALE5BssoxISIpH6qVKZRlr7UWGxOmV4CDPmku7DFLOSiwMk/Ml0V80BwzjNNY
hY8qfxcJOFOGZ8t82pWkVGMjgOAKjA==
=IN6Y
-----END PGP SIGNATURE-----
Merge tag 'fsnotify_for_v4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"fsnotify cleanups from Amir and a small inotify improvement"
* tag 'fsnotify_for_v4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
inotify: Add flag IN_MASK_CREATE for inotify_add_watch()
fanotify: factor out helpers to add/remove mark
fsnotify: add helper to get mask from connector
fsnotify: let connector point to an abstract object
fsnotify: pass connp and object type to fsnotify_add_mark()
fsnotify: use typedef fsnotify_connp_t for brevity
The Linux kernel adopted the SPDX License format headers to ease license
compliance management, and uses the C++ '//' style comments for the SPDX
header tags. Some files in the tracing directory used the C style /* */
comments for them. To be consistent across all files, replace the /* */
C style SPDX tags with the C++ // SPDX tags.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The current code in sock_map_ctx_update_elem() allows for BPF_EXIST
and BPF_NOEXIST map update flags. While on array-like maps this approach
is rather uncommon, e.g. bpf_fd_array_map_update_elem() and others
enforce map update flags to be BPF_ANY such that xchg() can be used
directly, the current implementation in sock map does not guarantee
that such operation with BPF_EXIST / BPF_NOEXIST is atomic.
The initial test does a READ_ONCE(stab->sock_map[i]) to fetch the
socket from the slot which is then tested for NULL / non-NULL. However
later after __sock_map_ctx_update_elem(), the actual update is done
through osock = xchg(&stab->sock_map[i], sock). Problem is that in
the meantime a different CPU could have updated / deleted a socket
on that specific slot and thus flag contraints won't hold anymore.
I've been thinking whether best would be to just break UAPI and do
an enforcement of BPF_ANY to check if someone actually complains,
however trouble is that already in BPF kselftest we use BPF_NOEXIST
for the map update, and therefore it might have been copied into
applications already. The fix to keep the current behavior intact
would be to add a map lock similar to the sock hash bucket lock only
for covering the whole map.
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The smap_start_sock() and smap_stop_sock() are each protected under
the sock->sk_callback_lock from their call-sites except in the case
of sock_map_delete_elem() where we drop the old socket from the map
slot. This is racy because the same sock could be part of multiple
sock maps, so we run smap_stop_sock() in parallel, and given at that
point psock->strp_enabled might be true on both CPUs, we might for
example wrongly restore the sk->sk_data_ready / sk->sk_write_space.
Therefore, hold the sock->sk_callback_lock as well on delete. Looks
like 2f857d0460 ("bpf: sockmap, remove STRPARSER map_flags and add
multi-map support") had this right, but later on e9db4ef6bf ("bpf:
sockhash fix omitted bucket lock in sock_close") removed it again
from delete leaving this smap_stop_sock() instance unprotected.
Fixes: e9db4ef6bf ("bpf: sockhash fix omitted bucket lock in sock_close")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
While working on sockmap I noticed that we do not always kfree the
struct smap_psock_map_entry list elements which track psocks attached
to maps. In the case of sock_hash_ctx_update_elem(), these map entries
are allocated outside of __sock_map_ctx_update_elem() with their
linkage to the socket hash table filled. In the case of sock array,
the map entries are allocated inside of __sock_map_ctx_update_elem()
and added with their linkage to the psock->maps. Both additions are
under psock->maps_lock each.
Now, we drop these elements from their psock->maps list in a few
occasions: i) in sock array via smap_list_map_remove() when an entry
is either deleted from the map from user space, or updated via
user space or BPF program where we drop the old socket at that map
slot, or the sock array is freed via sock_map_free() and drops all
its elements; ii) for sock hash via smap_list_hash_remove() in exactly
the same occasions as just described for sock array; iii) in the
bpf_tcp_close() where we remove the elements from the list via
psock_map_pop() and iterate over them dropping themselves from either
sock array or sock hash; and last but not least iv) once again in
smap_gc_work() which is a callback for deferring the work once the
psock refcount hit zero and thus the socket is being destroyed.
Problem is that the only case where we kfree() the list entry is
in case iv), which at that point should have an empty list in
normal cases. So in cases from i) to iii) we unlink the elements
without freeing where they go out of reach from us. Hence fix is
to properly kfree() them as well to stop the leakage. Given these
are all handled under psock->maps_lock there is no need for deferred
RCU freeing.
I later also ran with kmemleak detector and it confirmed the finding
as well where in the state before the fix the object goes unreferenced
while after the patch no kmemleak report related to BPF showed up.
[...]
unreferenced object 0xffff880378eadae0 (size 64):
comm "test_sockmap", pid 2225, jiffies 4294720701 (age 43.504s)
hex dump (first 32 bytes):
00 01 00 00 00 00 ad de 00 02 00 00 00 00 ad de ................
50 4d 75 5d 03 88 ff ff 00 00 00 00 00 00 00 00 PMu]............
backtrace:
[<000000005225ac3c>] sock_map_ctx_update_elem.isra.21+0xd8/0x210
[<0000000045dd6d3c>] bpf_sock_map_update+0x29/0x60
[<00000000877723aa>] ___bpf_prog_run+0x1e1f/0x4960
[<000000002ef89e83>] 0xffffffffffffffff
unreferenced object 0xffff880378ead240 (size 64):
comm "test_sockmap", pid 2225, jiffies 4294720701 (age 43.504s)
hex dump (first 32 bytes):
00 01 00 00 00 00 ad de 00 02 00 00 00 00 ad de ................
00 44 75 5d 03 88 ff ff 00 00 00 00 00 00 00 00 .Du]............
backtrace:
[<000000005225ac3c>] sock_map_ctx_update_elem.isra.21+0xd8/0x210
[<0000000030e37a3a>] sock_map_update_elem+0x125/0x240
[<000000002e5ce36e>] map_update_elem+0x4eb/0x7b0
[<00000000db453cc9>] __x64_sys_bpf+0x1f9/0x360
[<0000000000763660>] do_syscall_64+0x9a/0x300
[<00000000422a2bb2>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[<000000002ef89e83>] 0xffffffffffffffff
[...]
Fixes: e9db4ef6bf ("bpf: sockhash fix omitted bucket lock in sock_close")
Fixes: 54fedb42c6 ("bpf: sockmap, fix smap_list_map_remove when psock is in many maps")
Fixes: 2f857d0460 ("bpf: sockmap, remove STRPARSER map_flags and add multi-map support")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Masami Hiramatsu reported:
Current trace-enable attribute in sysfs returns an error
if user writes the same setting value as current one,
e.g.
# cat /sys/block/sda/trace/enable
0
# echo 0 > /sys/block/sda/trace/enable
bash: echo: write error: Invalid argument
# echo 1 > /sys/block/sda/trace/enable
# echo 1 > /sys/block/sda/trace/enable
bash: echo: write error: Device or resource busy
But this is not a preferred behavior, it should ignore
if new setting is same as current one. This fixes the
problem as below.
# cat /sys/block/sda/trace/enable
0
# echo 0 > /sys/block/sda/trace/enable
# echo 1 > /sys/block/sda/trace/enable
# echo 1 > /sys/block/sda/trace/enable
Link: http://lkml.kernel.org/r/20180816103802.08678002@gandalf.local.home
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: cd649b8bb8 ("blktrace: remove sysfs_blk_trace_enable_show/store()")
Reported-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 394e40a297 ("bpf: extend bpf_prog_array to store pointers
to the cgroup storage") refactored the bpf_prog_array_copy_core()
to accommodate new structure bpf_prog_array_item which contains
bpf_prog array itself.
In the old code, we had
perf_event_query_prog_array():
mutex_lock(...)
bpf_prog_array_copy_call():
prog = rcu_dereference_check(array, 1)->progs
bpf_prog_array_copy_core(prog, ...)
mutex_unlock(...)
With the above commit, we had
perf_event_query_prog_array():
mutex_lock(...)
bpf_prog_array_copy_call():
bpf_prog_array_copy_core(array, ...):
item = rcu_dereference(array)->items;
...
mutex_unlock(...)
The new code will trigger a lockdep rcu checking warning.
The fix is to change rcu_dereference() to rcu_dereference_check()
to prevent such a warning.
Reported-by: syzbot+6e72317008eef84a216b@syzkaller.appspotmail.com
Fixes: 394e40a297 ("bpf: extend bpf_prog_array to store pointers to the cgroup storage")
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-mcount-nop gcc option generates the calls to the profiling functions
as nops which allows to avoid patching mcount jump with NOP instructions
initially.
-mcount-nop gcc option will be activated if platform selects
HAVE_NOP_MCOUNT and gcc actually supports it.
In addition to that CC_USING_NOP_MCOUNT is defined and could be used by
architectures to adapt ftrace patching behavior.
Link: http://lkml.kernel.org/r/patch-3.thread-aa7b8d.git-e02ed2dc082b.your-ad-here.call-01533557518-ext-9465@work.hours
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJbc41pAAoJEAx081l5xIa+ZrAP/AzKj4i4pBLVJcvNZ2BwD+UD
ZNSNj2iqCJ5+Jo/WtIwQ8tLct9UqfVssUwBke6tZksiLdTigGPTUyVIAdK+9kyWD
D00m3x/pToJrSF2D0FwxQlPUtPkohp9N+E6+TU7gd1oCasZfBzmcEpoVAmZf+NWE
kN1xXpmGxZWpu0wc7JA2lv9MuUTijCwIqJqa5E0bB3z06G5mw+PJ89kYzMx19OyA
ZYQK8y3A40ZGl8UbajZ4xg9pqFCRYFFHGqfYlpUWWTh0XMAXu8+Yqzh3dJxmak7r
4u2pdQBsxPMZO8qKBHpVvI7Zhoe0Ntnolc0XVD+2IbqqnTprVbQs0bWf3YyfUlQi
1/9bWFK67W0LEuzac6M7a7EQqFNiHF13Btao7aqENTIe/GaCZJoopaiRMAmh6EHD
4PezeYqrW8cSaPj6OKouL1BhW9Bjixsg0bvjS/uB6m4KekFCt1++BDFGzkqvm6Mo
SVW7nkJoCFpCASaR7DhUEOPexaHeJ65HCDDUvYdqz9jd2w1TgvvanEZWual1NwEm
ImA8A4wGZ/3KijpyyKm0gE96RX7+zMMZ3brW6p1vhUUKVYJCrvSr5jrXH5+2k6Aw
Y455doGL87IRkwyje/YbQF0I8pbUZD9QS5wII13tLGwOH9/uC/Xl6dHNM40gtqyh
W4gEdY+NAMJmYLvRNawa
=g9rD
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This is the main drm pull request for 4.19.
Rob has some new hardware support for new qualcomm hw that I'll send
along separately. This has the display part of it, the remaining pull
is for the acceleration engine.
This also contains a wound-wait/wait-die mutex rework, Peter has acked
it for merging via my tree.
Otherwise mostly the usual level of activity. Summary:
core:
- Wound-wait/wait-die mutex rework
- Add writeback connector type
- Add "content type" property for HDMI
- Move GEM bo to drm_framebuffer
- Initial gpu scheduler documentation
- GPU scheduler fixes for dying processes
- Console deferred fbcon takeover support
- Displayport support for CEC tunneling over AUX
panel:
- otm8009a panel driver fixes
- Innolux TV123WAM and G070Y2-L01 panel driver
- Ilitek ILI9881c panel driver
- Rocktech RK070ER9427 LCD
- EDT ETM0700G0EDH6 and EDT ETM0700G0BDH6
- DLC DLC0700YZG-1
- BOE HV070WSA-100
- newhaven, nhd-4.3-480272ef-atxl LCD
- DataImage SCF0700C48GGU18
- Sharp LQ035Q7DB03
- p079zca: Refactor to support multiple panels
tinydrm:
- ILI9341 display panel
New driver:
- vkms - virtual kms driver to testing.
i915:
- Icelake:
Display enablement
DSI support
IRQ support
Powerwell support
- GPU reset fixes and improvements
- Full ppgtt support refactoring
- PSR fixes and improvements
- Execlist improvments
- GuC related fixes
amdgpu:
- Initial amdgpu documentation
- JPEG engine support on VCN
- CIK uses powerplay by default
- Move to using core PCIE functionality for gens/lanes
- DC/Powerplay interface rework
- Stutter mode support for RV
- Vega12 Powerplay updates
- GFXOFF fixes
- GPUVM fault debugging
- Vega12 GFXOFF
- DC improvements
- DC i2c/aux changes
- UVD 7.2 fixes
- Powerplay fixes for Polaris12, CZ/ST
- command submission bo_list fixes
amdkfd:
- Raven support
- Power management fixes
udl:
- Cleanups and fixes
nouveau:
- misc fixes and cleanups.
msm:
- DPU1 support display controller in sdm845
- GPU coredump support.
vmwgfx:
- Atomic modesetting validation fixes
- Support for multisample surfaces
armada:
- Atomic modesetting support completed.
exynos:
- IPPv2 fixes
- Move g2d to component framework
- Suspend/resume support cleanups
- Driver cleanups
imx:
- CSI configuration improvements
- Driver cleanups
- Use atomic suspend/resume helpers
- ipu-v3 V4L2 XRGB32/XBGR32 support
pl111:
- Add Nomadik LCDC variant
v3d:
- GPU scheduler jobs management
sun4i:
- R40 display engine support
- TCON TOP driver
mediatek:
- MT2712 SoC support
rockchip:
- vop fixes
omapdrm:
- Workaround for DRA7 errata i932
- Fix mm_list locking
mali-dp:
- Writeback implementation
PM improvements
- Internal error reporting debugfs
tilcdc:
- Single fix for deferred probing
hdlcd:
- Teardown fixes
tda998x:
- Converted to a bridge driver.
etnaviv:
- Misc fixes"
* tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm: (1506 commits)
drm/amdgpu/sriov: give 8s for recover vram under RUNTIME
drm/scheduler: fix param documentation
drm/i2c: tda998x: correct PLL divider calculation
drm/i2c: tda998x: get rid of private fill_modes function
drm/i2c: tda998x: move mode_valid() to bridge
drm/i2c: tda998x: register bridge outside of component helper
drm/i2c: tda998x: cleanup from previous changes
drm/i2c: tda998x: allocate tda998x_priv inside tda998x_create()
drm/i2c: tda998x: convert to bridge driver
drm/scheduler: fix timeout worker setup for out of order job completions
drm/amd/display: display connected to dp-1 does not light up
drm/amd/display: update clk for various HDMI color depths
drm/amd/display: program display clock on cache match
drm/amd/display: Add NULL check for enabling dp ss
drm/amd/display: add vbios table check for enabling dp ss
drm/amd/display: Don't share clk source between DP and HDMI
drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on Carrizo
drm/amd/display: Use calculated disp_clk_khz value for dce110
drm/amd/display: Implement custom degamma lut on dcn
drm/amd/display: Destroy aux_engines only once
...
Pull networking updates from David Miller:
"Highlights:
- Gustavo A. R. Silva keeps working on the implicit switch fallthru
changes.
- Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
Luca Coelho.
- Re-enable ASPM in r8169, from Kai-Heng Feng.
- Add virtual XFRM interfaces, which avoids all of the limitations of
existing IPSEC tunnels. From Steffen Klassert.
- Convert GRO over to use a hash table, so that when we have many
flows active we don't traverse a long list during accumluation.
- Many new self tests for routing, TC, tunnels, etc. Too many
contributors to mention them all, but I'm really happy to keep
seeing this stuff.
- Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.
- Lots of cleanups and fixes in L2TP code from Guillaume Nault.
- Add IPSEC offload support to netdevsim, from Shannon Nelson.
- Add support for slotting with non-uniform distribution to netem
packet scheduler, from Yousuk Seung.
- Add UDP GSO support to mlx5e, from Boris Pismenny.
- Support offloading of Team LAG in NFP, from John Hurley.
- Allow to configure TX queue selection based upon RX queue, from
Amritha Nambiar.
- Support ethtool ring size configuration in aquantia, from Anton
Mikaev.
- Support DSCP and flowlabel per-transport in SCTP, from Xin Long.
- Support list based batching and stack traversal of SKBs, this is
very exciting work. From Edward Cree.
- Busyloop optimizations in vhost_net, from Toshiaki Makita.
- Introduce the ETF qdisc, which allows time based transmissions. IGB
can offload this in hardware. From Vinicius Costa Gomes.
- Add parameter support to devlink, from Moshe Shemesh.
- Several multiplication and division optimizations for BPF JIT in
nfp driver, from Jiong Wang.
- Lots of prepatory work to make more of the packet scheduler layer
lockless, when possible, from Vlad Buslov.
- Add ACK filter and NAT awareness to sch_cake packet scheduler, from
Toke Høiland-Jørgensen.
- Support regions and region snapshots in devlink, from Alex Vesker.
- Allow to attach XDP programs to both HW and SW at the same time on
a given device, with initial support in nfp. From Jakub Kicinski.
- Add TLS RX offload and support in mlx5, from Ilya Lesokhin.
- Use PHYLIB in r8169 driver, from Heiner Kallweit.
- All sorts of changes to support Spectrum 2 in mlxsw driver, from
Ido Schimmel.
- PTP support in mv88e6xxx DSA driver, from Andrew Lunn.
- Make TCP_USER_TIMEOUT socket option more accurate, from Jon
Maxwell.
- Support for templates in packet scheduler classifier, from Jiri
Pirko.
- IPV6 support in RDS, from Ka-Cheong Poon.
- Native tproxy support in nf_tables, from Máté Eckl.
- Maintain IP fragment queue in an rbtree, but optimize properly for
in-order frags. From Peter Oskolkov.
- Improvde handling of ACKs on hole repairs, from Yuchung Cheng"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
hv/netvsc: Fix NULL dereference at single queue mode fallback
net: filter: mark expected switch fall-through
xen-netfront: fix warn message as irq device name has '/'
cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
net: dsa: mv88e6xxx: missing unlock on error path
rds: fix building with IPV6=m
inet/connection_sock: prefer _THIS_IP_ to current_text_addr
net: dsa: mv88e6xxx: bitwise vs logical bug
net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
ieee802154: hwsim: using right kind of iteration
net: hns3: Add vlan filter setting by ethtool command -K
net: hns3: Set tx ring' tc info when netdev is up
net: hns3: Remove tx ring BD len register in hns3_enet
net: hns3: Fix desc num set to default when setting channel
net: hns3: Fix for phy link issue when using marvell phy driver
net: hns3: Fix for information of phydev lost problem when down/up
net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
net: hns3: Add support for serdes loopback selftest
bnxt_en: take coredump_record structure off stack
...
Move the source statements of arch-independent Kconfig files instead of
duplicating the includes in every arch/$(SRCARCH)/Kconfig.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=gsQJ
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig consolidation from Masahiro Yamada:
"Consolidation of Kconfig files by Christoph Hellwig.
Move the source statements of arch-independent Kconfig files instead
of duplicating the includes in every arch/$(SRCARCH)/Kconfig"
* tag 'kconfig-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: add a Memory Management options" menu
kconfig: move the "Executable file formats" menu to fs/Kconfig.binfmt
kconfig: use a menu in arch/Kconfig to reduce clutter
kconfig: include kernel/Kconfig.preempt from init/Kconfig
Kconfig: consolidate the "Kernel hacking" menu
kconfig: include common Kconfig files from top-level Kconfig
kconfig: remove duplicate SWAP symbol defintions
um: create a proper drivers Kconfig
um: cleanup Kconfig files
um: stop abusing KBUILD_KCONFIG
- verify depmod is installed before modules_install
- support build salt in case build ids must be unique between builds
- allow users to specify additional host compiler flags via HOST*FLAGS,
and rename internal variables to KBUILD_HOST*FLAGS
- update buildtar script to drop vax support, add arm64 support
- update builddeb script for better debarch support
- document the pit-fall of if_changed usage
- fix parallel build of UML with O= option
- make 'samples' target depend on headers_install to fix build errors
- remove deprecated host-progs variable
- add a new coccinelle script for refcount_t vs atomic_t check
- improve double-test coccinelle script
- misc cleanups and fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=VjfG
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- verify depmod is installed before modules_install
- support build salt in case build ids must be unique between builds
- allow users to specify additional host compiler flags via HOST*FLAGS,
and rename internal variables to KBUILD_HOST*FLAGS
- update buildtar script to drop vax support, add arm64 support
- update builddeb script for better debarch support
- document the pit-fall of if_changed usage
- fix parallel build of UML with O= option
- make 'samples' target depend on headers_install to fix build errors
- remove deprecated host-progs variable
- add a new coccinelle script for refcount_t vs atomic_t check
- improve double-test coccinelle script
- misc cleanups and fixes
* tag 'kbuild-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits)
coccicheck: return proper error code on fail
Coccinelle: doubletest: reduce side effect false positives
kbuild: remove deprecated host-progs variable
kbuild: make samples really depend on headers_install
um: clean up archheaders recipe
kbuild: add %asm-generic to no-dot-config-targets
um: fix parallel building with O= option
scripts: Add Python 3 support to tracing/draw_functrace.py
builddeb: Add automatic support for sh{3,4}{,eb} architectures
builddeb: Add automatic support for riscv* architectures
builddeb: Add automatic support for m68k architecture
builddeb: Add automatic support for or1k architecture
builddeb: Add automatic support for sparc64 architecture
builddeb: Add automatic support for mips{,64}r6{,el} architectures
builddeb: Add automatic support for mips64el architecture
builddeb: Add automatic support for ppc64 and powerpcspe architectures
builddeb: Introduce functions to simplify kconfig tests in set_debarch
builddeb: Drop check for 32-bit s390
builddeb: Change architecture detection fallback to use dpkg-architecture
builddeb: Skip architecture detection when KBUILD_DEBARCH is set
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=TTFG
-----END PGP SIGNATURE-----
Merge tag 'printk-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Different vendors have a different expectation about a console
quietness. Make it configurable to reduce bike-shedding about the
upstream default
- Decide about the message visibility when the message is stored. It
avoids races caused by a delayed console handling
- Always store printk() messages into the per-CPU buffers again in NMI.
The only exception is when flushing trace log in panic(). There the
risk of loosing messages is worth an eventual reordering
- Handle invalid %pO printf modifiers correctly
- Better handle %p printf modifier tests before crng is initialized
- Some clean up
* tag 'printk-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
lib/vsprintf: Do not handle %pO[^F] as %px
printk: Fix warning about unused suppress_message_printing
printk/nmi: Prevent deadlock when accessing the main log buffer in NMI
printk: Create helper function to queue deferred console handling
printk: Split the code for storing a message into the log buffer
printk: Clean up syslog_print_all()
printk: Remove unnecessary kmalloc() from syslog during clear
printk: Make CONSOLE_LOGLEVEL_QUIET configurable
printk: make sure to print log on console.
lib/test_printf.c: accept "ptrval" as valid result for plain 'p' tests
-----BEGIN PGP SIGNATURE-----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=tnPz
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20180814' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit patches from Paul Moore:
"Twelve audit patches for v4.19 and they run the full gamut from fixes
to features.
Notable changes include the ability to use the "exe" audit filter
field in a wider variety of filter types, a fix for our comparison of
GID/EGID in audit filter rules, better association of related audit
records (connecting related audit records together into one audit
event), and a fix for a potential use-after-free in audit_add_watch().
All the patches pass the audit-testsuite and merge cleanly on your
current master branch"
* tag 'audit-pr-20180814' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: fix use-after-free in audit_add_watch
audit: use ktime_get_coarse_real_ts64() for timestamps
audit: use ktime_get_coarse_ts64() for time access
audit: simplify audit_enabled check in audit_watch_log_rule_change()
audit: check audit_enabled in audit_tree_log_remove_rule()
cred: conditionally declare groups-related functions
audit: eliminate audit_enabled magic number comparison
audit: rename FILTER_TYPE to FILTER_EXCLUDE
audit: Fix extended comparison of GID/EGID
audit: tie ANOM_ABEND records to syscall
audit: tie SECCOMP records to syscall
audit: allow other filter list types for AUDIT_EXE
Pull security subsystem updates from James Morris:
- kstrdup() return value fix from Eric Biggers
- Add new security_load_data hook to differentiate security checking of
kernel-loaded binaries in the case of there being no associated file
descriptor, from Mimi Zohar.
- Add ability to IMA to specify a policy at build-time, rather than
just via command line params or by loading a custom policy, from
Mimi.
- Allow IMA and LSMs to prevent sysfs firmware load fallback (e.g. if
using signed firmware), from Mimi.
- Allow IMA to deny loading of kexec kernel images, as they cannot be
measured by IMA, from Mimi.
* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
security: check for kstrdup() failure in lsm_append()
security: export security_kernel_load_data function
ima: based on policy warn about loading firmware (pre-allocated buffer)
module: replace the existing LSM hook in init_module
ima: add build time policy
ima: based on policy require signed firmware (sysfs fallback)
firmware: add call to LSM hook before firmware sysfs fallback
ima: based on policy require signed kexec kernel images
kexec: add call to LSM hook in original kexec_load syscall
security: define new LSM hook named security_kernel_load_data
MAINTAINERS: remove the outdated "LINUX SECURITY MODULE (LSM) FRAMEWORK" entry
A bunch of good stuff in here:
- Wire up support for qspinlock, replacing our trusty ticket lock code
- Add an IPI to flush_icache_range() to ensure that stale instructions
fetched into the pipeline are discarded along with the I-cache lines
- Support for the GCC "stackleak" plugin
- Support for restartable sequences, plus an arm64 port for the selftest
- Kexec/kdump support on systems booting with ACPI
- Rewrite of our syscall entry code in C, which allows us to zero the
GPRs on entry from userspace
- Support for chained PMU counters, allowing 64-bit event counters to be
constructed on current CPUs
- Ensure scheduler topology information is kept up-to-date with CPU
hotplug events
- Re-enable support for huge vmalloc/IO mappings now that the core code
has the correct hooks to use break-before-make sequences
- Miscellaneous, non-critical fixes and cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJbbV41AAoJELescNyEwWM0WoEIALhrKtsIn6vqFlSs/w6aDuJL
cMWmFxjTaKLmIq2+cJIdFLOJ3CH80Pu9gB+nEv/k+cZdCTfUVKfRf28HTpmYWsht
bb4AhdHMC7yFW752BHk+mzJspeC8h/2Rm8wMuNVplZ3MkPrwo3vsiuJTofLhVL/y
BihlU3+5sfBvCYIsWnuEZIev+/I/s/qm1ASiqIcKSrFRZP6VTt5f9TC75vFI8seW
7yc3odKb0CArexB8yBjiPNziehctQF42doxQyL45hezLfWw4qdgHOSiwyiOMxEz9
Fwwpp8Tx33SKLNJgqoqYznGW9PhYJ7n2Kslv19uchJrEV+mds82vdDNaWRULld4=
=kQn6
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"A bunch of good stuff in here. Worth noting is that we've pulled in
the x86/mm branch from -tip so that we can make use of the core
ioremap changes which allow us to put down huge mappings in the
vmalloc area without screwing up the TLB. Much of the positive
diffstat is because of the rseq selftest for arm64.
Summary:
- Wire up support for qspinlock, replacing our trusty ticket lock
code
- Add an IPI to flush_icache_range() to ensure that stale
instructions fetched into the pipeline are discarded along with the
I-cache lines
- Support for the GCC "stackleak" plugin
- Support for restartable sequences, plus an arm64 port for the
selftest
- Kexec/kdump support on systems booting with ACPI
- Rewrite of our syscall entry code in C, which allows us to zero the
GPRs on entry from userspace
- Support for chained PMU counters, allowing 64-bit event counters to
be constructed on current CPUs
- Ensure scheduler topology information is kept up-to-date with CPU
hotplug events
- Re-enable support for huge vmalloc/IO mappings now that the core
code has the correct hooks to use break-before-make sequences
- Miscellaneous, non-critical fixes and cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (90 commits)
arm64: alternative: Use true and false for boolean values
arm64: kexec: Add comment to explain use of __flush_icache_range()
arm64: sdei: Mark sdei stack helper functions as static
arm64, kaslr: export offset in VMCOREINFO ELF notes
arm64: perf: Add cap_user_time aarch64
efi/libstub: Only disable stackleak plugin for arm64
arm64: drop unused kernel_neon_begin_partial() macro
arm64: kexec: machine_kexec should call __flush_icache_range
arm64: svc: Ensure hardirq tracing is updated before return
arm64: mm: Export __sync_icache_dcache() for xen-privcmd
drivers/perf: arm-ccn: Use devm_ioremap_resource() to map memory
arm64: Add support for STACKLEAK gcc plugin
arm64: Add stack information to on_accessible_stack
drivers/perf: hisi: update the sccl_id/ccl_id when MT is supported
arm64: fix ACPI dependencies
rseq/selftests: Add support for arm64
arm64: acpi: fix alignment fault in accessing ACPI
efi/arm: map UEFI memory map even w/o runtime services enabled
efi/arm: preserve early mapping of UEFI memory map longer for BGRT
drivers: acpi: add dependency of EFI for arm64
...
Currently, the addresses of PTI entry trampolines are not exported to
user space. Kernel profiling tools need these addresses to identify the
kernel code, so add a symbol and address for each CPU's PTI entry
trampoline.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1528289651-4113-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The logic in update_iter_mod() is overcomplicated and gets worse every
time another get_ksymbol_* function is added.
In preparation for adding another get_ksymbol_* function, simplify logic
in update_iter_mod().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: (ftrace changes only) Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1528289651-4113-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit ea0212f40c (power: auto select CONFIG_SRCU) made the code in
drivers/base/power/wakeup.c use SRCU instead of RCU, but it forgot to
select CONFIG_SRCU in Kconfig, which leads to the following build
error if CONFIG_SRCU is not selected somewhere else:
drivers/built-in.o: In function `wakeup_source_remove':
(.text+0x3c6fc): undefined reference to `synchronize_srcu'
drivers/built-in.o: In function `pm_print_active_wakeup_sources':
(.text+0x3c7a8): undefined reference to `__srcu_read_lock'
drivers/built-in.o: In function `pm_print_active_wakeup_sources':
(.text+0x3c84c): undefined reference to `__srcu_read_unlock'
drivers/built-in.o: In function `device_wakeup_arm_wake_irqs':
(.text+0x3d1d8): undefined reference to `__srcu_read_lock'
drivers/built-in.o: In function `device_wakeup_arm_wake_irqs':
(.text+0x3d228): undefined reference to `__srcu_read_unlock'
drivers/built-in.o: In function `device_wakeup_disarm_wake_irqs':
(.text+0x3d24c): undefined reference to `__srcu_read_lock'
drivers/built-in.o: In function `device_wakeup_disarm_wake_irqs':
(.text+0x3d29c): undefined reference to `__srcu_read_unlock'
drivers/built-in.o:(.data+0x4158): undefined reference to `process_srcu'
Fix this error by selecting CONFIG_SRCU when PM_SLEEP is enabled.
Fixes: ea0212f40c (power: auto select CONFIG_SRCU)
Cc: 4.2+ <stable@vger.kernel.org> # 4.2+
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
[ rjw: Minor subject/changelog fixups ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 0cc3cd2165 ("cpu/hotplug: Boot HT siblings at least once")
breaks non-SMP builds.
[ I suspect the 'bool' fields should just be made to be bitfields and be
exposed regardless of configuration, but that's a separate cleanup
that I'll leave to the owners of this file for later. - Linus ]
Fixes: 0cc3cd2165 ("cpu/hotplug: Boot HT siblings at least once")
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Abel Vesa <abelvesa@linux.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
small fixes and updates. We also have new ktime_get_*() docs from Arnd,
some kernel-doc fixes, a new set of Italian translations (non so se vale la
pena, ma non fa male - speriamo bene), and some extensive early
memory-management documentation improvements from Mike Rapoport.
-----BEGIN PGP SIGNATURE-----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=x/P0
-----END PGP SIGNATURE-----
Merge tag 'docs-4.19' of git://git.lwn.net/linux
Pull documentation update from Jonathan Corbet:
"This was a moderately busy cycle for docs, with the usual collection
of small fixes and updates.
We also have new ktime_get_*() docs from Arnd, some kernel-doc fixes,
a new set of Italian translations (non so se vale la pena, ma non fa
male - speriamo bene), and some extensive early memory-management
documentation improvements from Mike Rapoport"
* tag 'docs-4.19' of git://git.lwn.net/linux: (52 commits)
Documentation: corrections to console/console.txt
Documentation: add ioctl number entry for v4l2-subdev.h
Remove gendered language from management style documentation
scripts/kernel-doc: Escape all literal braces in regexes
docs/mm: add description of boot time memory management
docs/mm: memblock: add overview documentation
docs/mm: memblock: add kernel-doc description for memblock types
docs/mm: memblock: add kernel-doc comments for memblock_add[_node]
docs/mm: memblock: update kernel-doc comments
mm/memblock: add a name for memblock flags enumeration
docs/mm: bootmem: add overview documentation
docs/mm: bootmem: add kernel-doc description of 'struct bootmem_data'
docs/mm: bootmem: fix kernel-doc warnings
docs/mm: nobootmem: fixup kernel-doc comments
mm/bootmem: drop duplicated kernel-doc comments
Documentation: vm.txt: Adding 'nr_hugepages_mempolicy' parameter description.
doc:it_IT: translation for kernel-hacking
docs: Fix the reference labels in Locking.rst
doc: tracing: Fix a typo of trace_stat
mm: Introduce new type vm_fault_t
...
- Add a new framework for CPU idle time injection (Daniel Lezcano).
- Add AVS support to the armada-37xx cpufreq driver (Gregory CLEMENT).
- Add support for current CPU frequency reporting to the ACPI CPPC
cpufreq driver (George Cherian).
- Rework the cooling device registration in the imx6q/thermal
driver (Bastian Stender).
- Make the pcc-cpufreq driver refuse to work with dynamic
scaling governors on systems with many CPUs to avoid
scalability issues with it (Rafael Wysocki).
- Fix the intel_pstate driver to report different maximum CPU
frequencies on systems where they really are different and to
ignore the turbo active ratio if hardware-managend P-states (HWP)
are in use; make it use the match_string() helper (Xie Yisheng,
Srinivas Pandruvada).
- Fix a minor deferred probe issue in the qcom-kryo cpufreq
driver (Niklas Cassel).
- Add a tracepoint for the tracking of frequency limits changes
(from Andriod) to the cpufreq core (Ruchi Kandoi).
- Fix a circular lock dependency between CPU hotplug and sysfs
locking in the cpufreq core reported by lockdep (Waiman Long).
- Avoid excessive error reports on driver registration failures
in the ARM cpuidle driver (Sudeep Holla).
- Add a new device links flag to the driver core to make links go
away automatically on supplier driver removal (Vivek Gautam).
- Eliminate potential race condition between system-wide power
management transitions and system shutdown (Pingfan Liu).
- Add a quirk to save NVS memory on system suspend for the ASUS
1025C laptop (Willy Tarreau).
- Make more systems use suspend-to-idle (instead of ACPI S3) by
default (Tristian Celestin).
- Get rid of stack VLA usage in the low-level hibernation code on
64-bit x86 (Kees Cook).
- Fix error handling in the hibernation core and mark an expected
fall-through switch in it (Chengguang Xu, Gustavo Silva).
- Extend the generic power domains (genpd) framework to support
attaching a device to a power domain by name (Ulf Hansson).
- Fix device reference counting and user limits initialization in
the devfreq core (Arvind Yadav, Matthias Kaehlcke).
- Fix a few issues in the rk3399_dmc devfreq driver and improve its
documentation (Enric Balletbo i Serra, Lin Huang, Nick Milner).
- Drop a redundant error message from the exynos-ppmu devfreq driver
(Markus Elfring).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJbcqOqAAoJEILEb/54YlRxOxMP/2ZFvnXU0pey/VX/+TelLMS7
/ROVGQ+s75QP1c9P/3BjvnXc0dsMRLRFPog+7wyoG/2DbEIV25COyAYsmSE0TRni
XUaZO6YAx4/e3pm2AfamYbLCPvjw85eucHg5QJQ4b1mSVRNJOsNv+fUo6lmxwvnm
j9kHvfttFeIhoa/3wa7hbhPKLln46atnpVSxCIceY7L5EFNhkKBvQt6B5yx9geb9
QMY6ohgkyN+bnK9QySXX+trcWpzx1uGX0apI07NkX7n9QGFdU4lCW8lsAf8jMC3g
PPValTsUQsdRONUJJsrgqBioq4tvtgQWibyS2tfRrOGXYvHpJNpGmHVplfsrf/SE
cvlsciR47YbmrXZuqg/r8hql+qefNN16/rnZIZ9VnbcG806VBy2z8IzI5wcdWR7p
vzxhbCqVqOHcEdEwRwvuM2io67MWvkGtKsbCP+33DBh8SubpsECpKN4nIDboa3SE
CJ15RUqXnF6enmmfCKOoHZeu7iXWDz6Pi71XmRzaj9DqbITVV281IerqLgV3rbal
BVa53+202iD0IP+2b7KedGe/5ALlI97ffN0gB+L/eB832853DKSZQKzcvvpRhEN7
Iv2crnUwuQED9ns8P7hzp1Bk9CFCAOLW8UM43YwZRPWnmdeSsPJusJ5lzkAf7bss
wfsFoUE3RaY4msnuHyCh
=kv2M
-----END PGP SIGNATURE-----
Merge tag 'pm-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add a new framework for CPU idle time injection, to be used by
all of the idle injection code in the kernel in the future, fix some
issues and add a number of relatively small extensions in multiple
places.
Specifics:
- Add a new framework for CPU idle time injection (Daniel Lezcano).
- Add AVS support to the armada-37xx cpufreq driver (Gregory
CLEMENT).
- Add support for current CPU frequency reporting to the ACPI CPPC
cpufreq driver (George Cherian).
- Rework the cooling device registration in the imx6q/thermal driver
(Bastian Stender).
- Make the pcc-cpufreq driver refuse to work with dynamic scaling
governors on systems with many CPUs to avoid scalability issues
with it (Rafael Wysocki).
- Fix the intel_pstate driver to report different maximum CPU
frequencies on systems where they really are different and to
ignore the turbo active ratio if hardware-managend P-states (HWP)
are in use; make it use the match_string() helper (Xie Yisheng,
Srinivas Pandruvada).
- Fix a minor deferred probe issue in the qcom-kryo cpufreq driver
(Niklas Cassel).
- Add a tracepoint for the tracking of frequency limits changes (from
Andriod) to the cpufreq core (Ruchi Kandoi).
- Fix a circular lock dependency between CPU hotplug and sysfs
locking in the cpufreq core reported by lockdep (Waiman Long).
- Avoid excessive error reports on driver registration failures in
the ARM cpuidle driver (Sudeep Holla).
- Add a new device links flag to the driver core to make links go
away automatically on supplier driver removal (Vivek Gautam).
- Eliminate potential race condition between system-wide power
management transitions and system shutdown (Pingfan Liu).
- Add a quirk to save NVS memory on system suspend for the ASUS 1025C
laptop (Willy Tarreau).
- Make more systems use suspend-to-idle (instead of ACPI S3) by
default (Tristian Celestin).
- Get rid of stack VLA usage in the low-level hibernation code on
64-bit x86 (Kees Cook).
- Fix error handling in the hibernation core and mark an expected
fall-through switch in it (Chengguang Xu, Gustavo Silva).
- Extend the generic power domains (genpd) framework to support
attaching a device to a power domain by name (Ulf Hansson).
- Fix device reference counting and user limits initialization in the
devfreq core (Arvind Yadav, Matthias Kaehlcke).
- Fix a few issues in the rk3399_dmc devfreq driver and improve its
documentation (Enric Balletbo i Serra, Lin Huang, Nick Milner).
- Drop a redundant error message from the exynos-ppmu devfreq driver
(Markus Elfring)"
* tag 'pm-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits)
PM / reboot: Eliminate race between reboot and suspend
PM / hibernate: Mark expected switch fall-through
cpufreq: intel_pstate: Ignore turbo active ratio in HWP
cpufreq: Fix a circular lock dependency problem
cpu/hotplug: Add a cpus_read_trylock() function
x86/power/hibernate_64: Remove VLA usage
cpufreq: trace frequency limits change
cpufreq: intel_pstate: Show different max frequency with turbo 3 and HWP
cpufreq: pcc-cpufreq: Disable dynamic scaling on many-CPU systems
cpufreq: qcom-kryo: Silently error out on EPROBE_DEFER
cpufreq / CPPC: Add cpuinfo_cur_freq support for CPPC
cpufreq: armada-37xx: Add AVS support
dt-bindings: marvell: Add documentation for the Armada 3700 AVS binding
PM / devfreq: rk3399_dmc: Fix duplicated opp table on reload.
PM / devfreq: Init user limits from OPP limits, not viceversa
PM / devfreq: rk3399_dmc: fix spelling mistakes.
PM / devfreq: rk3399_dmc: do not print error when get supply and clk defer.
dt-bindings: devfreq: rk3399_dmc: move interrupts to be optional.
PM / devfreq: rk3399_dmc: remove wait for dcf irq event.
dt-bindings: clock: add rk3399 DDR3 standard speed bins.
...
- a series from Robin to fix bus imposed dma limits by adding a separate
mask for them to struct device instead of trying to squeeze a second
meaning out of the existing dma mask as we did before. This has ACKs
from the various other subsystems touched
- a small swiotlb cleanup from Kees (acked by Konrad)
- conversion of nios2 and sh to the new generic dma-noncoherent code.
Various other architecture conversions will come through the
architectures maintainers trees.
-----BEGIN PGP SIGNATURE-----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=WNwP
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.19' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- a series from Robin to fix bus imposed dma limits by adding a
separate mask for them to struct device instead of trying to squeeze
a second meaning out of the existing dma mask as we did before.
This has ACKs from the various other subsystems touched
- a small swiotlb cleanup from Kees (acked by Konrad)
- conversion of nios2 and sh to the new generic dma-noncoherent code.
Various other architecture conversions will come through the
architectures maintainers trees.
* tag 'dma-mapping-4.19' of git://git.infradead.org/users/hch/dma-mapping:
sh: use generic dma_noncoherent_ops
sh: split arch/sh/mm/consistent.c
sh: use dma_direct_ops for the CONFIG_DMA_COHERENT case
sh: introduce a sh_cacheop_vaddr helper
sh: simplify get_arch_dma_ops
OF: Don't set default coherent DMA mask
ACPI/IORT: Don't set default coherent DMA mask
iommu/dma: Respect bus DMA limit for IOVAs
of/device: Set bus DMA mask as appropriate
ACPI/IORT: Set bus DMA mask as appropriate
dma-mapping: Generalise dma_32bit_limit flag
ACPI/IORT: Support address size limit for root complexes
of/platform: Initialise default DMA masks
nios2: use generic dma_noncoherent_ops
swiotlb: clean up reporting
dma-mapping: relax warning for per-device areas
-----BEGIN PGP SIGNATURE-----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=b9ib
-----END PGP SIGNATURE-----
Merge tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"First pull request for this merge window, there will also be a
followup request with some stragglers.
This pull request contains:
- Fix for a thundering heard issue in the wbt block code (Anchal
Agarwal)
- A few NVMe pull requests:
* Improved tracepoints (Keith)
* Larger inline data support for RDMA (Steve Wise)
* RDMA setup/teardown fixes (Sagi)
* Effects log suppor for NVMe target (Chaitanya Kulkarni)
* Buffered IO suppor for NVMe target (Chaitanya Kulkarni)
* TP4004 (ANA) support (Christoph)
* Various NVMe fixes
- Block io-latency controller support. Much needed support for
properly containing block devices. (Josef)
- Series improving how we handle sense information on the stack
(Kees)
- Lightnvm fixes and updates/improvements (Mathias/Javier et al)
- Zoned device support for null_blk (Matias)
- AIX partition fixes (Mauricio Faria de Oliveira)
- DIF checksum code made generic (Max Gurtovoy)
- Add support for discard in iostats (Michael Callahan / Tejun)
- Set of updates for BFQ (Paolo)
- Removal of async write support for bsg (Christoph)
- Bio page dirtying and clone fixups (Christoph)
- Set of bcache fix/changes (via Coly)
- Series improving blk-mq queue setup/teardown speed (Ming)
- Series improving merging performance on blk-mq (Ming)
- Lots of other fixes and cleanups from a slew of folks"
* tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block: (190 commits)
blkcg: Make blkg_root_lookup() work for queues in bypass mode
bcache: fix error setting writeback_rate through sysfs interface
null_blk: add lock drop/acquire annotation
Blk-throttle: reduce tail io latency when iops limit is enforced
block: paride: pd: mark expected switch fall-throughs
block: Ensure that a request queue is dissociated from the cgroup controller
block: Introduce blk_exit_queue()
blkcg: Introduce blkg_root_lookup()
block: Remove two superfluous #include directives
blk-mq: count the hctx as active before allocating tag
block: bvec_nr_vecs() returns value for wrong slab
bcache: trivial - remove tailing backslash in macro BTREE_FLAG
bcache: make the pr_err statement used for ENOENT only in sysfs_attatch section
bcache: set max writeback rate when I/O request is idle
bcache: add code comments for bset.c
bcache: fix mistaken comments in request.c
bcache: fix mistaken code comments in bcache.h
bcache: add a comment in super.c
bcache: avoid unncessary cache prefetch bch_btree_node_get()
bcache: display rate debug parameters to 0 when writeback is not running
...
Merge L1 Terminal Fault fixes from Thomas Gleixner:
"L1TF, aka L1 Terminal Fault, is yet another speculative hardware
engineering trainwreck. It's a hardware vulnerability which allows
unprivileged speculative access to data which is available in the
Level 1 Data Cache when the page table entry controlling the virtual
address, which is used for the access, has the Present bit cleared or
other reserved bits set.
If an instruction accesses a virtual address for which the relevant
page table entry (PTE) has the Present bit cleared or other reserved
bits set, then speculative execution ignores the invalid PTE and loads
the referenced data if it is present in the Level 1 Data Cache, as if
the page referenced by the address bits in the PTE was still present
and accessible.
While this is a purely speculative mechanism and the instruction will
raise a page fault when it is retired eventually, the pure act of
loading the data and making it available to other speculative
instructions opens up the opportunity for side channel attacks to
unprivileged malicious code, similar to the Meltdown attack.
While Meltdown breaks the user space to kernel space protection, L1TF
allows to attack any physical memory address in the system and the
attack works across all protection domains. It allows an attack of SGX
and also works from inside virtual machines because the speculation
bypasses the extended page table (EPT) protection mechanism.
The assoicated CVEs are: CVE-2018-3615, CVE-2018-3620, CVE-2018-3646
The mitigations provided by this pull request include:
- Host side protection by inverting the upper address bits of a non
present page table entry so the entry points to uncacheable memory.
- Hypervisor protection by flushing L1 Data Cache on VMENTER.
- SMT (HyperThreading) control knobs, which allow to 'turn off' SMT
by offlining the sibling CPU threads. The knobs are available on
the kernel command line and at runtime via sysfs
- Control knobs for the hypervisor mitigation, related to L1D flush
and SMT control. The knobs are available on the kernel command line
and at runtime via sysfs
- Extensive documentation about L1TF including various degrees of
mitigations.
Thanks to all people who have contributed to this in various ways -
patches, review, testing, backporting - and the fruitful, sometimes
heated, but at the end constructive discussions.
There is work in progress to provide other forms of mitigations, which
might be less horrible performance wise for a particular kind of
workloads, but this is not yet ready for consumption due to their
complexity and limitations"
* 'l1tf-final' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
x86/microcode: Allow late microcode loading with SMT disabled
tools headers: Synchronise x86 cpufeatures.h for L1TF additions
x86/mm/kmmio: Make the tracer robust against L1TF
x86/mm/pat: Make set_memory_np() L1TF safe
x86/speculation/l1tf: Make pmd/pud_mknotpresent() invert
x86/speculation/l1tf: Invert all not present mappings
cpu/hotplug: Fix SMT supported evaluation
KVM: VMX: Tell the nested hypervisor to skip L1D flush on vmentry
x86/speculation: Use ARCH_CAPABILITIES to skip L1D flush on vmentry
x86/speculation: Simplify sysfs report of VMX L1TF vulnerability
Documentation/l1tf: Remove Yonah processors from not vulnerable list
x86/KVM/VMX: Don't set l1tf_flush_l1d from vmx_handle_external_intr()
x86/irq: Let interrupt handlers set kvm_cpu_l1tf_flush_l1d
x86: Don't include linux/irq.h from asm/hardirq.h
x86/KVM/VMX: Introduce per-host-cpu analogue of l1tf_flush_l1d
x86/irq: Demote irq_cpustat_t::__softirq_pending to u16
x86/KVM/VMX: Move the l1tf_flush_l1d test to vmx_l1d_flush()
x86/KVM/VMX: Replace 'vmx_l1d_flush_always' with 'vmx_l1d_flush_cond'
x86/KVM/VMX: Don't set l1tf_flush_l1d to true from vmx_l1d_flush()
cpu/hotplug: detect SMT disabled by BIOS
...
Merge cpufreq changes for 4.19.
These are driver extensions, some driver and core fixes and a new
tracepoint for the tracking of frequency limits changes (coming from
Android).
* pm-cpufreq:
cpufreq: intel_pstate: Ignore turbo active ratio in HWP
cpufreq: Fix a circular lock dependency problem
cpu/hotplug: Add a cpus_read_trylock() function
cpufreq: trace frequency limits change
cpufreq: intel_pstate: Show different max frequency with turbo 3 and HWP
cpufreq: pcc-cpufreq: Disable dynamic scaling on many-CPU systems
cpufreq: qcom-kryo: Silently error out on EPROBE_DEFER
cpufreq / CPPC: Add cpuinfo_cur_freq support for CPPC
cpufreq: armada-37xx: Add AVS support
dt-bindings: marvell: Add documentation for the Armada 3700 AVS binding
cpufreq: imx6q/thermal: imx: register cooling device depending on OF
cpufreq: intel_pstate: use match_string() helper
Merge changes in the PM core, system-wide PM infrastructure, generic
power domains (genpd) framework, ACPI PM infrastructure and cpuidle
for 4.19.
* pm-core:
driver core: Add flag to autoremove device link on supplier unbind
driver core: Rename flag AUTOREMOVE to AUTOREMOVE_CONSUMER
* pm-domains:
PM / Domains: Introduce dev_pm_domain_attach_by_name()
PM / Domains: Introduce option to attach a device by name to genpd
PM / Domains: dt: Add a power-domain-names property
* pm-sleep:
PM / reboot: Eliminate race between reboot and suspend
PM / hibernate: Mark expected switch fall-through
x86/power/hibernate_64: Remove VLA usage
PM / hibernate: cast PAGE_SIZE to int when comparing with error code
* acpi-pm:
ACPI / PM: save NVS memory for ASUS 1025C laptop
ACPI / PM: Default to s2idle in all machines supporting LP S0
* pm-cpuidle:
ARM: cpuidle: silence error on driver registration failure
An overview of the general architecture changes:
- Massive DMA ops refactoring from Christoph Hellwig (huzzah for
deleting crufty code!).
- We introduce NT_MIPS_DSP & NT_MIPS_FP_MODE ELF notes & corresponding
regsets to expose DSP ASE & floating point mode state respectively,
both for live debugging & core dumps.
- We better optimize our code by hard-coding cpu_has_* macros at
compile time where their values are known due to the ISA revision
that the kernel build is targeting.
- The EJTAG exception handler now better handles SMP systems, where it
was previously possible for CPUs to clobber a register value saved
by another CPU.
- Our implementation of memset() gained a couple of fixes for MIPSr6
systems to return correct values in some cases where stores fault.
- We now implement ioremap_wc() using the uncached-accelerated cache
coherency attribute where supported, which is detected during boot,
and fall back to plain uncached access where necessary. The
MIPS-specific (and unused in tree) ioremap_uncached_accelerated() &
ioremap_cacheable_cow() are removed.
- The prctl(PR_SET_FP_MODE, ...) syscall is better supported for SMP
systems by reworking the way we ensure remote CPUs that may be
running threads within the affected process switch mode.
- Systems using the MIPS Coherence Manager will now set the
MIPS_IC_SNOOPS_REMOTE flag to avoid some unnecessary cache
maintenance overhead when flushing the icache.
- A few fixes were made for building with clang/LLVM, which
now sucessfully builds kernels for many of our platforms.
- Miscellaneous cleanups all over.
And some platform-specific changes:
- ar7 gained stubs for a few clock API functions to fix build failures
for some drivers.
- ath79 gained support for a few new SoCs, a few fixes & better
gpio-keys support.
- Ci20 now exposes its SPI bus using the spi-gpio driver.
- The generic platform can now auto-detect a suitable value for
PHYS_OFFSET based upon the memory map described by the device tree,
allowing us to avoid wasting memory on page book-keeping for systems
where RAM starts at a non-zero physical address.
- Ingenic systems using the jz4740 platform code now link their
vmlinuz higher to allow for kernels of a realistic size.
- Loongson32 now builds the kernel targeting MIPSr1 rather than MIPSr2
to avoid CPU errata.
- Loongson64 gains a couple of fixes, a workaround for a write
buffering issue & support for the Loongson 3A R3.1 CPU.
- Malta now uses the piix4-poweroff driver to handle powering down.
- Microsemi Ocelot gained support for its SPI bus & NOR flash, its
second MDIO bus and can now be supported by a FIT/.itb image.
- Octeon saw a bunch of header cleanups which remove a lot of
duplicate or unused code.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCW3G6JxUccGF1bC5idXJ0
b25AbWlwcy5jb20ACgkQPqefrLV1AN0n/gD/Rpdgay31G/4eTTKBmBrcaju6Shjt
/2Iu6WC5Sj4hDHUBAJSbuI+B9YjcNsjekBYxB/LLD7ImcLBl6nLMIvKmXLAL
=cUiF
-----END PGP SIGNATURE-----
Merge tag 'mips_4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Paul Burton:
"Here are the main MIPS changes for 4.19.
An overview of the general architecture changes:
- Massive DMA ops refactoring from Christoph Hellwig (huzzah for
deleting crufty code!).
- We introduce NT_MIPS_DSP & NT_MIPS_FP_MODE ELF notes &
corresponding regsets to expose DSP ASE & floating point mode state
respectively, both for live debugging & core dumps.
- We better optimize our code by hard-coding cpu_has_* macros at
compile time where their values are known due to the ISA revision
that the kernel build is targeting.
- The EJTAG exception handler now better handles SMP systems, where
it was previously possible for CPUs to clobber a register value
saved by another CPU.
- Our implementation of memset() gained a couple of fixes for MIPSr6
systems to return correct values in some cases where stores fault.
- We now implement ioremap_wc() using the uncached-accelerated cache
coherency attribute where supported, which is detected during boot,
and fall back to plain uncached access where necessary. The
MIPS-specific (and unused in tree) ioremap_uncached_accelerated() &
ioremap_cacheable_cow() are removed.
- The prctl(PR_SET_FP_MODE, ...) syscall is better supported for SMP
systems by reworking the way we ensure remote CPUs that may be
running threads within the affected process switch mode.
- Systems using the MIPS Coherence Manager will now set the
MIPS_IC_SNOOPS_REMOTE flag to avoid some unnecessary cache
maintenance overhead when flushing the icache.
- A few fixes were made for building with clang/LLVM, which now
sucessfully builds kernels for many of our platforms.
- Miscellaneous cleanups all over.
And some platform-specific changes:
- ar7 gained stubs for a few clock API functions to fix build
failures for some drivers.
- ath79 gained support for a few new SoCs, a few fixes & better
gpio-keys support.
- Ci20 now exposes its SPI bus using the spi-gpio driver.
- The generic platform can now auto-detect a suitable value for
PHYS_OFFSET based upon the memory map described by the device tree,
allowing us to avoid wasting memory on page book-keeping for
systems where RAM starts at a non-zero physical address.
- Ingenic systems using the jz4740 platform code now link their
vmlinuz higher to allow for kernels of a realistic size.
- Loongson32 now builds the kernel targeting MIPSr1 rather than
MIPSr2 to avoid CPU errata.
- Loongson64 gains a couple of fixes, a workaround for a write
buffering issue & support for the Loongson 3A R3.1 CPU.
- Malta now uses the piix4-poweroff driver to handle powering down.
- Microsemi Ocelot gained support for its SPI bus & NOR flash, its
second MDIO bus and can now be supported by a FIT/.itb image.
- Octeon saw a bunch of header cleanups which remove a lot of
duplicate or unused code"
* tag 'mips_4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (123 commits)
MIPS: Remove remnants of UASM_ISA
MIPS: netlogic: xlr: Remove erroneous check in nlm_fmn_send()
MIPS: VDSO: Force link endianness
MIPS: Always specify -EB or -EL when using clang
MIPS: Use dins to simplify __write_64bit_c0_split()
MIPS: Use read-write output operand in __write_64bit_c0_split()
MIPS: Avoid using array as parameter to write_c0_kpgd()
MIPS: vdso: Allow clang's --target flag in VDSO cflags
MIPS: genvdso: Remove GOT checks
MIPS: Remove obsolete MIPS checks for DST node "chosen@0"
MIPS: generic: Remove input symbols from defconfig
MIPS: Delete unused code in linux32.c
MIPS: Remove unused sys_32_mmap2
MIPS: Remove nabi_no_regargs
mips: dts: mscc: enable spi and NOR flash support on ocelot PCB123
mips: dts: mscc: Add spi on Ocelot
MIPS: Loongson: Merge load addresses
MIPS: Loongson: Set Loongson32 to MIPS32R1
MIPS: mscc: ocelot: add interrupt controller properties to GPIO controller
MIPS: generic: Select MIPS_AUTO_PFN_OFFSET
...
Pull parisc updates from Helge Deller:
- parisc now uses the generic dma_noncoherent_ops implementation
(Christoph Hellwig)
- further memory barrier and spinlock improvements (John David Anglin)
- prepare removal of current_text_addr() functions (Nick Desaulniers)
- improve kernel stack unwinding on parisc (me)
- drop ENOTSUP which was defined on parisc only (me)
* 'parisc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix and improve kernel stack unwinding
parisc: Remove unnecessary barriers from spinlock.h
parisc: Remove ordered stores from syscall.S
parisc: prefer _THIS_IP_ and _RET_IP_ statement expressions
parisc: Add HAVE_REGS_AND_STACK_ACCESS_API feature
parisc: Drop architecture-specific ENOTSUP define
parisc: use generic dma_noncoherent_ops
parisc: always use flush_kernel_dcache_range for DMA cache maintainance
parisc: merge pcx_dma_ops and pcxl_dma_ops
Pull x86 timer updates from Thomas Gleixner:
"Early TSC based time stamping to allow better boot time analysis.
This comes with a general cleanup of the TSC calibration code which
grew warts and duct taping over the years and removes 250 lines of
code. Initiated and mostly implemented by Pavel with help from various
folks"
* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
x86/kvmclock: Mark kvm_get_preset_lpj() as __init
x86/tsc: Consolidate init code
sched/clock: Disable interrupts when calling generic_sched_clock_init()
timekeeping: Prevent false warning when persistent clock is not available
sched/clock: Close a hole in sched_clock_init()
x86/tsc: Make use of tsc_calibrate_cpu_early()
x86/tsc: Split native_calibrate_cpu() into early and late parts
sched/clock: Use static key for sched_clock_running
sched/clock: Enable sched clock early
sched/clock: Move sched clock initialization and merge with generic clock
x86/tsc: Use TSC as sched clock early
x86/tsc: Initialize cyc2ns when tsc frequency is determined
x86/tsc: Calibrate tsc only once
ARM/time: Remove read_boot_clock64()
s390/time: Remove read_boot_clock64()
timekeeping: Default boot time offset to local_clock()
timekeeping: Replace read_boot_clock64() with read_persistent_wall_and_boot_offset()
s390/time: Add read_persistent_wall_and_boot_offset()
x86/xen/time: Output xen sched_clock time from 0
x86/xen/time: Initialize pv xen time in init_hypervisor_platform()
...
Add addition argument 'arch_uprobe' to uprobe_write_opcode().
We need this in later set of patches.
Link: http://lkml.kernel.org/r/20180809041856.1547-3-ravi.bangoria@linux.ibm.com
Reviewed-by: Song Liu <songliubraving@fb.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Simplify uprobe_register() function body and let __uprobe_register()
handle everything. Also move dependency functions around to avoid build
failures.
Link: http://lkml.kernel.org/r/20180809041856.1547-2-ravi.bangoria@linux.ibm.com
Reviewed-by: Song Liu <songliubraving@fb.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull x86 mm updates from Thomas Gleixner:
- Make lazy TLB mode even lazier to avoid pointless switch_mm()
operations, which reduces CPU load by 1-2% for memcache workloads
- Small cleanups and improvements all over the place
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Remove redundant check for kmem_cache_create()
arm/asm/tlb.h: Fix build error implicit func declaration
x86/mm/tlb: Make clear_asid_other() static
x86/mm/tlb: Skip atomic operations for 'init_mm' in switch_mm_irqs_off()
x86/mm/tlb: Always use lazy TLB mode
x86/mm/tlb: Only send page table free TLB flush to lazy TLB CPUs
x86/mm/tlb: Make lazy TLB mode lazier
x86/mm/tlb: Restructure switch_mm_irqs_off()
x86/mm/tlb: Leave lazy TLB mode at page table free time
mm: Allocate the mm_cpumask (mm->cpu_bitmap[]) dynamically based on nr_cpu_ids
x86/mm: Add TLB purge to free pmd/pte page interfaces
ioremap: Update pgtable free interfaces with addr
x86/mm: Disable ioremap free page handling on x86-PAE
Pull timer updates from Thomas Gleixner:
"The timers departement more or less proudly presents:
- More Y2038 timekeeping work mostly in the core code. The work is
slowly, but steadily targeting the actuall syscalls.
- Enhanced timekeeping suspend/resume support by utilizing
clocksources which do not stop during suspend, but are otherwise
not the main timekeeping clocksources.
- Make NTP adjustmets more accurate and immediate when the frequency
is set directly and not incrementally.
- Sanitize the overrung handing of posix timers
- A new timer driver for Mediatek SoCs
- The usual pile of fixes and updates all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
clockevents: Warn if cpu_all_mask is used as cpumask
tick/broadcast-hrtimer: Use cpu_possible_mask for ce_broadcast_hrtimer
clocksource/drivers/arm_arch_timer: Fix bogus cpu_all_mask usage
clocksource: ti-32k: Remove CLOCK_SOURCE_SUSPEND_NONSTOP flag
timers: Clear timer_base::must_forward_clk with timer_base::lock held
clocksource/drivers/sprd: Register one always-on timer to compensate suspend time
clocksource/drivers/timer-mediatek: Add support for system timer
clocksource/drivers/timer-mediatek: Convert the driver to timer-of
clocksource/drivers/timer-mediatek: Use specific prefix for GPT
clocksource/drivers/timer-mediatek: Rename mtk_timer to timer-mediatek
clocksource/drivers/timer-mediatek: Add system timer bindings
clocksource/drivers: Set clockevent device cpumask to cpu_possible_mask
time: Introduce one suspend clocksource to compensate the suspend time
time: Fix extra sleeptime injection when suspend fails
timekeeping/ntp: Constify some function arguments
ntp: Use kstrtos64 for s64 variable
ntp: Remove redundant arguments
timer: Fix coding style
ktime: Provide typesafe ktime_to_ns()
hrtimer: Improve kernel message printing
...
Pull perf update from Thomas Gleixner:
"The perf crowd presents:
Kernel updates:
- Removal of jprobes
- Cleanup and consolidatation the handling of kprobes
- Cleanup and consolidation of hardware breakpoints
- The usual pile of fixes and updates to PMUs and event descriptors
Tooling updates:
- Updates and improvements all over the place. Nothing outstanding,
just the (good) boring incremental grump work"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
perf trace: Do not require --no-syscalls to suppress strace like output
perf bpf: Include uapi/linux/bpf.h from the 'perf trace' script's bpf.h
perf tools: Allow overriding MAX_NR_CPUS at compile time
perf bpf: Show better message when failing to load an object
perf list: Unify metric group description format with PMU event description
perf vendor events arm64: Update ThunderX2 implementation defined pmu core events
perf cs-etm: Generate branch sample for CS_ETM_TRACE_ON packet
perf cs-etm: Generate branch sample when receiving a CS_ETM_TRACE_ON packet
perf cs-etm: Support dummy address value for CS_ETM_TRACE_ON packet
perf cs-etm: Fix start tracing packet handling
perf build: Fix installation directory for eBPF
perf c2c report: Fix crash for empty browser
perf tests: Fix indexing when invoking subtests
perf trace: Beautify the AF_INET & AF_INET6 'socket' syscall 'protocol' args
perf trace beauty: Add beautifiers for 'socket''s 'protocol' arg
perf trace beauty: Do not print NULL strarray entries
perf beauty: Add a generator for IPPROTO_ socket's protocol constants
tools include uapi: Grab a copy of linux/in.h
perf tests: Fix complex event name parsing
perf evlist: Fix error out while applying initial delay and LBR
...
Pull locking/atomics update from Thomas Gleixner:
"The locking, atomics and memory model brains delivered:
- A larger update to the atomics code which reworks the ordering
barriers, consolidates the atomic primitives, provides the new
atomic64_fetch_add_unless() primitive and cleans up the include
hell.
- Simplify cmpxchg() instrumentation and add instrumentation for
xchg() and cmpxchg_double().
- Updates to the memory model and documentation"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits)
locking/atomics: Rework ordering barriers
locking/atomics: Instrument cmpxchg_double*()
locking/atomics: Instrument xchg()
locking/atomics: Simplify cmpxchg() instrumentation
locking/atomics/x86: Reduce arch_cmpxchg64*() instrumentation
tools/memory-model: Rename litmus tests to comply to norm7
tools/memory-model/Documentation: Fix typo, smb->smp
sched/Documentation: Update wake_up() & co. memory-barrier guarantees
locking/spinlock, sched/core: Clarify requirements for smp_mb__after_spinlock()
sched/core: Use smp_mb() in wake_woken_function()
tools/memory-model: Add informal LKMM documentation to MAINTAINERS
locking/atomics/Documentation: Describe atomic_set() as a write operation
tools/memory-model: Make scripts executable
tools/memory-model: Remove ACCESS_ONCE() from model
tools/memory-model: Remove ACCESS_ONCE() from recipes
locking/memory-barriers.txt/kokr: Update Korean translation to fix broken DMA vs. MMIO ordering example
MAINTAINERS: Add Daniel Lustig as an LKMM reviewer
tools/memory-model: Fix ISA2+pooncelock+pooncelock+pombonce name
tools/memory-model: Add litmus test for full multicopy atomicity
locking/refcount: Always allow checked forms
...
Pull CPU hotplug update from Thomas Gleixner:
"A trivial name fix for the hotplug state machine"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Clarify CPU hotplug step name for timers
Pull scheduler updates from Thomas Gleixner:
- Cleanup and improvement of NUMA balancing
- Refactoring and improvements to the PELT (Per Entity Load Tracking)
code
- Watchdog simplification and related cleanups
- The usual pile of small incremental fixes and improvements
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
watchdog: Reduce message verbosity
stop_machine: Reflow cpu_stop_queue_two_works()
sched/numa: Move task_numa_placement() closer to numa_migrate_preferred()
sched/numa: Use group_weights to identify if migration degrades locality
sched/numa: Update the scan period without holding the numa_group lock
sched/numa: Remove numa_has_capacity()
sched/numa: Modify migrate_swap() to accept additional parameters
sched/numa: Remove unused task_capacity from 'struct numa_stats'
sched/numa: Skip nodes that are at 'hoplimit'
sched/debug: Reverse the order of printing faults
sched/numa: Use task faults only if numa_group is not yet set up
sched/numa: Set preferred_node based on best_cpu
sched/numa: Simplify load_too_imbalanced()
sched/numa: Evaluate move once per node
sched/numa: Remove redundant field
sched/debug: Show the sum wait time of a task group
sched/fair: Remove #ifdefs from scale_rt_capacity()
sched/core: Remove get_cpu() from sched_fork()
sched/cpufreq: Clarify sugov_get_util()
sched/sysctl: Remove unused sched_time_avg_ms sysctl
...
Pull scheduler fix from Thomas Gleixner:
"A single bugfix to prevent a pinned thread which queues stomp machine
work to be preempted by the stopper thread on its CPU which causes a
live lock as it is unable to wake the second CPUs stopper thread"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
stop_machine: Atomically queue and wake stopper threads
Pull RCU updates from Thomas Gleixner:
"A large update to RCU:
Preparatory work for consolidating the RCU flavors:
- Introduce grace-period sequence numbers to the RCU-bh, RCU-preempt,
and RCU-sched flavors, replacing the old ->gpnum and ->completed
pair of fields.
This change allows lockless code to obtain the complete
grace-period state with a single READ_ONCE(), which is needed to
maintain tolerable lock contention during the upcoming
consolidation of the three RCU flavors.
Note that grace-period sequence numbers are already used by
rcu_barrier(), expedited RCU grace periods, and SRCU, and are thus
already heavily used and well-tested. Joel Fernandes contributed a
number of excellent fixes and improvements.
- Clean up some grace-period-reporting loose ends, including
improving the handling of quiescent states from offline CPUs and
fixing some false-positive WARN_ON_ONCE() invocations.
(Strictly speaking, the WARN_ON_ONCE() invocations were quite
correct, but their invariants were (harmlessly) violated by the
earlier sloppy handling of quiescent states from offline CPUs.)
In addition, improve grace-period forward-progress guarantees so as
to allow removal of fail-safe checks that required otherwise
needless lock acquisitions. Finally, add more diagnostics to help
debug the upcoming consolidation of the RCU-bh, RCU-preempt, and
RCU-sched flavors.
The rest:
- SRCU updates
- Updates to rcutorture and associated scripting.
- The usual pile of miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (118 commits)
rcutorture: Fix rcu_barrier successes counter
rcutorture: Add support to detect if boost kthread prio is too low
rcutorture: Use monotonic timestamp for stall detection
rcutorture: Make boost test more robust
rcutorture: Disable RT throttling for boost tests
rcutorture: Emphasize testing of single reader protection type
rcutorture: Handle extended read-side critical sections
rcutorture: Make rcu_torture_timer() use rcu_torture_one_read()
rcutorture: Use per-CPU random state for rcu_torture_timer()
rcutorture: Use atomic increment for n_rcu_torture_timers
rcutorture: Extract common code from rcu_torture_reader()
rcuperf: Remove unused torturing_tasks() function
rcu: Remove rcutorture test version and sequence number
rcutorture: Change units of onoff_interval to jiffies
rcu: Assign higher prio to RCU threads if rcutorture is built-in
rculist: Improve documentation for list_for_each_entry_from_rcu()
srcu: Add grace-period number to rcutorture statistics printout
rcu: Print stall-warning NMI dyntick state in hexadecimal
MAINTAINERS: Update RCU, SRCU, and TORTURE-TEST entries
rcu: Make rcu_seq_diff() more exact
...
Pull genirq updates from Thomas Gleixner:
"The irq departement provides:
- A synchronization fix for free_irq() to synchronize just the
removed interrupt thread on shared interrupt lines.
- Consolidate the multi low level interrupt entry handling and mvoe
it to the generic code instead of adding yet another copy for
RISC-V
- Refactoring of the ARM LPI allocator and LPI exposure to the
hypervisor
- Yet another interrupt chip driver for the JZ4725B SoC
- Speed up for /proc/interrupts as people seem to love reading this
file with high frequency
- Miscellaneous fixes and updates"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
irqchip/gic-v3-its: Make its_lock a raw_spin_lock_t
genirq/irqchip: Remove MULTI_IRQ_HANDLER as it's now obselete
openrisc: Use the new GENERIC_IRQ_MULTI_HANDLER
arm64: Use the new GENERIC_IRQ_MULTI_HANDLER
ARM: Convert to GENERIC_IRQ_MULTI_HANDLER
irqchip: Port the ARM IRQ drivers to GENERIC_IRQ_MULTI_HANDLER
irqchip/gic-v3-its: Reduce minimum LPI allocation to 1 for PCI devices
dt-bindings: irqchip: renesas-irqc: Document r8a77980 support
dt-bindings: irqchip: renesas-irqc: Document r8a77470 support
irqchip/ingenic: Add support for the JZ4725B SoC
irqchip/stm32: Add exti0 translation for stm32mp1
genirq: Remove redundant NULL pointer check in __free_irq()
irqchip/gic-v3-its: Honor hypervisor enforced LPI range
irqchip/gic-v3: Expose GICD_TYPER in the rdist structure
irqchip/gic-v3-its: Drop chunk allocation compatibility
irqchip/gic-v3-its: Move minimum LPI requirements to individual busses
irqchip/gic-v3-its: Use full range of LPIs
irqchip/gic-v3-its: Refactor LPI allocator
genirq: Synchronize only with single thread on free_irq()
genirq: Update code comments wrt recycled thread_mask
...
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-08-13
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add driver XDP support for veth. This can be used in conjunction with
redirect of another XDP program e.g. sitting on NIC so the xdp_frame
can be forwarded to the peer veth directly without modification,
from Toshiaki.
2) Add a new BPF map type REUSEPORT_SOCKARRAY and prog type SK_REUSEPORT
in order to provide more control and visibility on where a SO_REUSEPORT
sk should be located, and the latter enables to directly select a sk
from the bpf map. This also enables map-in-map for application migration
use cases, from Martin.
3) Add a new BPF helper bpf_skb_ancestor_cgroup_id() that returns the id
of cgroup v2 that is the ancestor of the cgroup associated with the
skb at the ancestor_level, from Andrey.
4) Implement BPF fs map pretty-print support based on BTF data for regular
hash table and LRU map, from Yonghong.
5) Decouple the ability to attach BTF for a map from the key and value
pretty-printer in BPF fs, and enable further support of BTF for maps for
percpu and LPM trie, from Daniel.
6) Implement a better BPF sample of using XDP's CPU redirect feature for
load balancing SKB processing to remote CPU. The sample implements the
same XDP load balancing as Suricata does which is symmetric hash based
on IP and L4 protocol, from Jesper.
7) Revert adding NULL pointer check with WARN_ON_ONCE() in __xdp_return()'s
critical path as it is ensured that the allocator is present, from Björn.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
parisc is the only Linux architecture which has defined a value for ENOTSUP.
All other architectures #define ENOTSUP as EOPNOTSUPP in their libc headers.
Having an own value for ENOTSUP which is different than EOPNOTSUPP often gives
problems with userspace programs which expect both to be the same. One such
example is a build error in the libuv package, as can be seen in
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=900237.
Since we dropped HP-UX support, there is no real benefit in keeping an own
value for ENOTSUP. This patch drops the parisc value for ENOTSUP from the
kernel sources. glibc needs no patch, it reuses the exported headers.
Signed-off-by: Helge Deller <deller@gmx.de>
Commit a26ca7c982 ("bpf: btf: Add pretty print support to
the basic arraymap") and 699c86d6ec ("bpf: btf: add pretty
print for hash/lru_hash maps") enabled support for BTF and
dumping via BPF fs for array and hash/lru map. However, both
can be decoupled from each other such that regular BPF maps
can be supported for attaching BTF key/value information,
while not all maps necessarily need to dump via map_seq_show_elem()
callback.
The basic sanity check which is a prerequisite for all maps
is that key/value size has to match in any case, and some maps
can have extra checks via map_check_btf() callback, e.g.
probing certain types or indicating no support in general. With
that we can also enable retrieving BTF info for per-cpu map
types and lpm.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
This is purely a preparatory patch for upcoming changes during the 4.19
merge window.
We have a function called "boot_cpu_state_init()" that isn't really
about the bootup cpu state: that is done much earlier by the similarly
named "boot_cpu_init()" (note lack of "state" in name).
This function initializes some hotplug CPU state, and needs to run after
the percpu data has been properly initialized. It even has a comment to
that effect.
Except it _doesn't_ actually run after the percpu data has been properly
initialized. On x86 it happens to do that, but on at least arm and
arm64, the percpu base pointers are initialized by the arch-specific
'smp_prepare_boot_cpu()' hook, which ran _after_ boot_cpu_state_init().
This had some unexpected results, and in particular we have a patch
pending for the merge window that did the obvious cleanup of using
'this_cpu_write()' in the cpu hotplug init code:
- per_cpu_ptr(&cpuhp_state, smp_processor_id())->state = CPUHP_ONLINE;
+ this_cpu_write(cpuhp_state.state, CPUHP_ONLINE);
which is obviously the right thing to do. Except because of the
ordering issue, it actually failed miserably and unexpectedly on arm64.
So this just fixes the ordering, and changes the name of the function to
be 'boot_cpu_hotplug_init()' to make it obvious that it's about cpu
hotplug state, because the core CPU state was supposed to have already
been done earlier.
Marked for stable, since the (not yet merged) patch that will show this
problem is marked for stable.
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Mian Yousaf Kaukab <yousaf.kaukab@suse.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Holding uts_sem as a writer while accessing userspace memory allows a
namespace admin to stall all processes that attempt to take uts_sem.
Instead, move data through stack buffers and don't access userspace memory
while uts_sem is held.
Cc: stable@vger.kernel.org
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
The old code would hold the userns_state_mutex indefinitely if
memdup_user_nul stalled due to e.g. a userfault region. Prevent that by
moving the memdup_user_nul in front of the mutex_lock().
Note: This changes the error precedence of invalid buf/count/*ppos vs
map already written / capabilities missing.
Fixes: 22d917d80e ("userns: Rework the user_namespace adding uid/gid...")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Christian Brauner <christian@brauner.io>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
This patch adds a BPF_PROG_TYPE_SK_REUSEPORT which can select
a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY. Like other
non SK_FILTER/CGROUP_SKB program, it requires CAP_SYS_ADMIN.
BPF_PROG_TYPE_SK_REUSEPORT introduces "struct sk_reuseport_kern"
to store the bpf context instead of using the skb->cb[48].
At the SO_REUSEPORT sk lookup time, it is in the middle of transiting
from a lower layer (ipv4/ipv6) to a upper layer (udp/tcp). At this
point, it is not always clear where the bpf context can be appended
in the skb->cb[48] to avoid saving-and-restoring cb[]. Even putting
aside the difference between ipv4-vs-ipv6 and udp-vs-tcp. It is not
clear if the lower layer is only ipv4 and ipv6 in the future and
will it not touch the cb[] again before transiting to the upper
layer.
For example, in udp_gro_receive(), it uses the 48 byte NAPI_GRO_CB
instead of IP[6]CB and it may still modify the cb[] after calling
the udp[46]_lib_lookup_skb(). Because of the above reason, if
sk->cb is used for the bpf ctx, saving-and-restoring is needed
and likely the whole 48 bytes cb[] has to be saved and restored.
Instead of saving, setting and restoring the cb[], this patch opts
to create a new "struct sk_reuseport_kern" and setting the needed
values in there.
The new BPF_PROG_TYPE_SK_REUSEPORT and "struct sk_reuseport_(kern|md)"
will serve all ipv4/ipv6 + udp/tcp combinations. There is no protocol
specific usage at this point and it is also inline with the current
sock_reuseport.c implementation (i.e. no protocol specific requirement).
In "struct sk_reuseport_md", this patch exposes data/data_end/len
with semantic similar to other existing usages. Together
with "bpf_skb_load_bytes()" and "bpf_skb_load_bytes_relative()",
the bpf prog can peek anywhere in the skb. The "bind_inany" tells
the bpf prog that the reuseport group is bind-ed to a local
INANY address which cannot be learned from skb.
The new "bind_inany" is added to "struct sock_reuseport" which will be
used when running the new "BPF_PROG_TYPE_SK_REUSEPORT" bpf prog in order
to avoid repeating the "bind INANY" test on
"sk_v6_rcv_saddr/sk->sk_rcv_saddr" every time a bpf prog is run. It can
only be properly initialized when a "sk->sk_reuseport" enabled sk is
adding to a hashtable (i.e. during "reuseport_alloc()" and
"reuseport_add_sock()").
The new "sk_select_reuseport()" is the main helper that the
bpf prog will use to select a SO_REUSEPORT sk. It is the only function
that can use the new BPF_MAP_TYPE_REUSEPORT_ARRAY. As mentioned in
the earlier patch, the validity of a selected sk is checked in
run time in "sk_select_reuseport()". Doing the check in
verification time is difficult and inflexible (consider the map-in-map
use case). The runtime check is to compare the selected sk's reuseport_id
with the reuseport_id that we want. This helper will return -EXXX if the
selected sk cannot serve the incoming request (e.g. reuseport_id
not match). The bpf prog can decide if it wants to do SK_DROP as its
discretion.
When the bpf prog returns SK_PASS, the kernel will check if a
valid sk has been selected (i.e. "reuse_kern->selected_sk != NULL").
If it does , it will use the selected sk. If not, the kernel
will select one from "reuse->socks[]" (as before this patch).
The SK_DROP and SK_PASS handling logic will be in the next patch.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch introduces a new map type BPF_MAP_TYPE_REUSEPORT_SOCKARRAY.
To unleash the full potential of a bpf prog, it is essential for the
userspace to be capable of directly setting up a bpf map which can then
be consumed by the bpf prog to make decision. In this case, decide which
SO_REUSEPORT sk to serve the incoming request.
By adding BPF_MAP_TYPE_REUSEPORT_SOCKARRAY, the userspace has total control
and visibility on where a SO_REUSEPORT sk should be located in a bpf map.
The later patch will introduce BPF_PROG_TYPE_SK_REUSEPORT such that
the bpf prog can directly select a sk from the bpf map. That will
raise the programmability of the bpf prog attached to a reuseport
group (a group of sk serving the same IP:PORT).
For example, in UDP, the bpf prog can peek into the payload (e.g.
through the "data" pointer introduced in the later patch) to learn
the application level's connection information and then decide which sk
to pick from a bpf map. The userspace can tightly couple the sk's location
in a bpf map with the application logic in generating the UDP payload's
connection information. This connection info contact/API stays within the
userspace.
Also, when used with map-in-map, the userspace can switch the
old-server-process's inner map to a new-server-process's inner map
in one call "bpf_map_update_elem(outer_map, &index, &new_reuseport_array)".
The bpf prog will then direct incoming requests to the new process instead
of the old process. The old process can finish draining the pending
requests (e.g. by "accept()") before closing the old-fds. [Note that
deleting a fd from a bpf map does not necessary mean the fd is closed]
During map_update_elem(),
Only SO_REUSEPORT sk (i.e. which has already been added
to a reuse->socks[]) can be used. That means a SO_REUSEPORT sk that is
"bind()" for UDP or "bind()+listen()" for TCP. These conditions are
ensured in "reuseport_array_update_check()".
A SO_REUSEPORT sk can only be added once to a map (i.e. the
same sk cannot be added twice even to the same map). SO_REUSEPORT
already allows another sk to be created for the same IP:PORT.
There is no need to re-create a similar usage in the BPF side.
When a SO_REUSEPORT is deleted from the "reuse->socks[]" (e.g. "close()"),
it will notify the bpf map to remove it from the map also. It is
done through "bpf_sk_reuseport_detach()" and it will only be called
if >=1 of the "reuse->sock[]" has ever been added to a bpf map.
The map_update()/map_delete() has to be in-sync with the
"reuse->socks[]". Hence, the same "reuseport_lock" used
by "reuse->socks[]" has to be used here also. Care has
been taken to ensure the lock is only acquired when the
adding sk passes some strict tests. and
freeing the map does not require the reuseport_lock.
The reuseport_array will also support lookup from the syscall
side. It will return a sock_gen_cookie(). The sock_gen_cookie()
is on-demand (i.e. a sk's cookie is not generated until the very
first map_lookup_elem()).
The lookup cookie is 64bits but it goes against the logical userspace
expectation on 32bits sizeof(fd) (and as other fd based bpf maps do also).
It may catch user in surprise if we enforce value_size=8 while
userspace still pass a 32bits fd during update. Supporting different
value_size between lookup and update seems unintuitive also.
We also need to consider what if other existing fd based maps want
to return 64bits value from syscall's lookup in the future.
Hence, reuseport_array supports both value_size 4 and 8, and
assuming user will usually use value_size=4. The syscall's lookup
will return ENOSPC on value_size=4. It will will only
return 64bits value from sock_gen_cookie() when user consciously
choose value_size=8 (as a signal that lookup is desired) which then
requires a 64bits value in both lookup and update.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
While debugging another bug, I was looking at all the synchronize*()
functions being used in kernel/trace, and noticed that trace_uprobes was
using synchronize_sched(), with a comment to synchronize with
{u,ret}_probe_trace_func(). When looking at those functions, the data is
protected with "rcu_read_lock()" and not with "rcu_read_lock_sched()". This
is using the wrong synchronize_*() function.
Link: http://lkml.kernel.org/r/20180809160553.469e1e32@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: 70ed91c6ec ("tracing/uprobes: Support ftrace_event_file base multibuffer")
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Now that some trace events can be protected by srcu_read_lock(tracepoint_srcu),
we need to make sure all locations that depend on this are also protected.
There were many places that did a synchronize_sched() thinking that it was
enough to protect againts access to trace events. This use to be the case,
but now that we use SRCU for _rcuidle() trace events, they may not be
protected by synchronize_sched(), as they may be called in paths that RCU is
not watching for preempt disable.
Fixes: e6753f23d9 ("tracepoint: Make rcuidle tracepoint callers use SRCU")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pointer ftrace_swapper_pid is defined but is never used hence it is
redundant and can be removed. The use of this variable was removed
in commit 345ddcc882 ("ftrace: Have set_ftrace_pid use the bitmap
like events do").
Cleans up clang warning:
warning: 'ftrace_swapper_pid' defined but not used [-Wunused-const-variable=]
Link: http://lkml.kernel.org/r/20180809125609.13142-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Joel Fernandes created a nice patch that cleaned up the duplicate hooks used
by lockdep and irqsoff latency tracer. It made both use tracepoints. But the
latency tracer is triggering warnings when using tracepoints to call into
the latency tracer's routines. Mainly, they can be called from NMI context.
If that happens, then the SRCU may not work properly because on some
architectures, SRCU is not safe to be called in both NMI and non-NMI
context.
This is a partial revert of the clean up patch c3bc8fd637 ("tracing:
Centralize preemptirq tracepoints and unify their usage") that adds back the
direct calls into the latency tracer. It also only calls the trace events
when not in NMI.
Link: http://lkml.kernel.org/r/20180809210654.622445925@goodmis.org
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Fixes: c3bc8fd637 ("tracing: Centralize preemptirq tracepoints and unify their usage")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
I was hitting the following warning:
WARNING: CPU: 0 PID: 1 at kernel/trace/trace_irqsoff.c:631 tracer_hardirqs_off+0x15/0x2a
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.0-rc6-test+ #13
Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014
EIP: tracer_hardirqs_off+0x15/0x2a
Code: ff 85 c0 74 0e 8b 45 00 8b 50 04 8b 45 04 e8 35 ff ff ff 5d c3 55 64 a1 cc 37 51 c1 a9 ff ff ff 7f 89 e5 53 89 d3 89 ca 75 02 <0f> 0b e8 90 fc ff ff 85 c0 74 07 89 d8 e8 0c ff ff ff 5b 5d c3 55
EAX: 80000000 EBX: c04337f0 ECX: c04338e3 EDX: c04338e3
ESI: c04337f0 EDI: c04338e3 EBP: f2aa1d68 ESP: f2aa1d64
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00210046
CR0: 80050033 CR2: 00000000 CR3: 01668000 CR4: 001406f0
Call Trace:
trace_irq_disable_rcuidle+0x63/0x6c
trace_hardirqs_off+0x26/0x30
default_send_IPI_mask_allbutself_logical+0x31/0x93
default_send_IPI_allbutself+0x37/0x48
native_send_call_func_ipi+0x4d/0x6a
smp_call_function_many+0x165/0x19d
? add_nops+0x34/0x34
? trace_hardirqs_on_caller+0x2d/0x2d
? add_nops+0x34/0x34
smp_call_function+0x1f/0x23
on_each_cpu+0x15/0x43
? trace_hardirqs_on_caller+0x2d/0x2d
? trace_hardirqs_on_caller+0x2d/0x2d
? trace_irq_disable_rcuidle+0x1/0x6c
text_poke_bp+0xa0/0xc2
? trace_hardirqs_on_caller+0x2d/0x2d
arch_jump_label_transform+0xa7/0xcb
? trace_irq_disable_rcuidle+0x5/0x6c
__jump_label_update+0x3e/0x6d
jump_label_update+0x7d/0x81
static_key_slow_inc_cpuslocked+0x58/0x6d
static_key_slow_inc+0x19/0x20
tracepoint_probe_register_prio+0x19e/0x1d1
? start_critical_timings+0x1c/0x1c
tracepoint_probe_register+0xf/0x11
irqsoff_tracer_init+0x21/0xf2
tracer_init+0x16/0x1a
trace_selftest_startup_irqsoff+0x25/0xc4
run_tracer_selftest+0xca/0x131
register_tracer+0xd5/0x172
? trace_event_define_fields_preemptirq_template+0x45/0x45
init_irqsoff_tracer+0xd/0x11
do_one_initcall+0xab/0x1e8
? rcu_read_lock_sched_held+0x3d/0x44
? trace_initcall_level+0x52/0x86
kernel_init_freeable+0x195/0x21a
? rest_init+0xb4/0xb4
kernel_init+0xd/0xe4
ret_from_fork+0x2e/0x38
It is due to running a CONFIG_PREEMPT_VOLUNTARY kernel, which would trigger
this warning every time:
WARN_ON_ONCE(preempt_count());
Because on CONFIG_PREEMPT_VOLUNTARY, preempt_count() is always zero.
This warning is to make sure preempt_count is set because
tracer_hardirqs_on() does a preempt_enable_notrace() to make the
preempt_trace() work properly, as being called by a trace event, the trace
event code disables preemption, and the tracer wants to know what the
preemption was before it was called.
Instead of enabling preemption like this, just record the preempt_count,
subtract PREEMPT_DISABLE_OFFSET from it (which is zero with !CONFIG_PREEMPT
set), and pass that value to the necessary functions, which should use the
passed in parameter instead of calling preempt_count() directly.
Fixes: da5b3ebb45 ("tracing: irqsoff: Account for additional preempt_disable")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Joel Fernandes created a nice patch that cleaned up the duplicate hooks used
by lockdep and irqsoff latency tracer. It made both use tracepoints. But it
caused lockdep to trigger several false positives. We have not figured out
why yet, but removing lockdep from using the trace event hooks and just call
its helper functions directly (like it use to), makes the problem go away.
This is a partial revert of the clean up patch c3bc8fd637 ("tracing:
Centralize preemptirq tracepoints and unify their usage") that adds direct
calls for lockdep, but also keeps most of the clean up done to get rid of
the horrible preprocessor if statements.
Link: http://lkml.kernel.org/r/20180806155058.5ee875f4@gandalf.local.home
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Fixes: c3bc8fd637 ("tracing: Centralize preemptirq tracepoints and unify their usage")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Commit a26ca7c982 ("bpf: btf: Add pretty print support to
the basic arraymap") added pretty print support to array map.
This patch adds pretty print for hash and lru_hash maps.
The following example shows the pretty-print result of
a pinned hashmap:
struct map_value {
int count_a;
int count_b;
};
cat /sys/fs/bpf/pinned_hash_map:
87907: {87907,87908}
57354: {37354,57355}
76625: {76625,76626}
...
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
In function map_seq_next() of kernel/bpf/inode.c,
the first key will be the "0" regardless of the map type.
This works for array. But for hash type, if it happens
key "0" is in the map, the bpffs map show will miss
some items if the key "0" is not the first element of
the first bucket.
This patch fixed the issue by guaranteeing to get
the first element, if the seq_show is just started,
by passing NULL pointer key to map_get_next_key() callback.
This way, no missing elements will occur for
bpffs hash table show even if key "0" is in the map.
Fixes: a26ca7c982 ("bpf: btf: Add pretty print support to the basic arraymap")
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Like cpumap teardown, the devmap teardown code also flush remaining
xdp_frames, via bq_xmit_all() in case map entry is removed. The code
can call xdp_return_frame_rx_napi, from the the wrong context, in-case
ndo_xdp_xmit() fails.
Fixes: 389ab7f01a ("xdp: introduce xdp_return_frame_rx_napi")
Fixes: 735fc4054b ("xdp: change ndo_xdp_xmit API to support bulking")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When removing a cpumap entry, a number of syncronization steps happen.
Eventually the teardown code __cpu_map_entry_free is invoked from/via
call_rcu.
The teardown code __cpu_map_entry_free() flushes remaining xdp_frames,
by invoking bq_flush_to_queue, which calls xdp_return_frame_rx_napi().
The issues is that the teardown code is not running in the RX NAPI
code path. Thus, it is not allowed to invoke the NAPI variant of
xdp_return_frame.
This bug was found and triggered by using the --stress-mode option to
the samples/bpf program xdp_redirect_cpu. It is hard to trigger,
because the ptr_ring have to be full and cpumap bulk queue max
contains 8 packets, and a remote CPU is racing to empty the ptr_ring
queue.
Fixes: 389ab7f01a ("xdp: introduce xdp_return_frame_rx_napi")
Tested-by: Jean-Tsung Hsiao <jhsiao@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Wen Yang <wen.yang99@zte.com.cn> and majiang <ma.jiang@zte.com.cn>
report that a periodic signal received during fork can cause fork to
continually restart preventing an application from making progress.
The code was being overly pessimistic. Fork needs to guarantee that a
signal sent to multiple processes is logically delivered before the
fork and just to the forking process or logically delivered after the
fork to both the forking process and it's newly spawned child. For
signals like periodic timers that are always delivered to a single
process fork can safely complete and let them appear to logically
delivered after the fork().
While examining this issue I also discovered that fork today will miss
signals delivered to multiple processes during the fork and handled by
another thread. Similarly the current code will also miss blocked
signals that are delivered to multiple process, as those signals will
not appear pending during fork.
Add a list of each thread that is currently forking, and keep on that
list a signal set that records all of the signals sent to multiple
processes. When fork completes initialize the new processes
shared_pending signal set with it. The calculate_sigpending function
will see those signals and set TIF_SIGPENDING causing the new task to
take the slow path to userspace to handle those signals. Making it
appear as if those signals were received immediately after the fork.
It is not possible to send real time signals to multiple processes and
exceptions don't go to multiple processes, which means that that are
no signals sent to multiple processes that require siginfo. This
means it is safe to not bother collecting siginfo on signals sent
during fork.
The sigaction of a child of fork is initially the same as the
sigaction of the parent process. So a signal the parent ignores the
child will also initially ignore. Therefore it is safe to ignore
signals sent to multiple processes and ignored by the forking process.
Signals sent to only a single process or only a single thread and delivered
during fork are treated as if they are received after the fork, and generally
not dealt with. They won't cause any problems.
V2: Added removal from the multiprocess list on failure.
V3: Use -ERESTARTNOINTR directly
V4: - Don't queue both SIGCONT and SIGSTOP
- Initialize signal_struct.multiprocess in init_task
- Move setting of shared_pending to before the new task
is visible to signals. This prevents signals from comming
in before shared_pending.signal is set to delayed.signal
and being lost.
V5: - rework list add and delete to account for idle threads
v6: - Use sigdelsetmask when removing stop signals
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200447
Reported-by: Wen Yang <wen.yang99@zte.com.cn> and
Reported-by: majiang <ma.jiang@zte.com.cn>
Fixes: 4a2c7a7837 ("[PATCH] make fork() atomic wrt pgrp/session signals")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
In bpf_tcp_sendmsg() the sk_alloc_sg() may fail. In the case of
ENOMEM, it may also mean that we've partially filled the scatterlist
entries with pages. Later jumping to sk_stream_wait_memory()
we could further fail with an error for several reasons, however
we miss to call free_start_sg() if the local sk_msg_buff was used.
Fixes: 4f738adba3 ("bpf: create tcp_bpf_ulp allowing BPF to monitor socket TX/RX data")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
While working on bpf_tcp_sendmsg() code, I noticed that when a
sk->sk_err is set we error out with err = sk->sk_err. However
this is problematic since sk->sk_err is a positive error value
and therefore we will neither go into sk_stream_error() nor will
we report an error back to user space. I had this case with EPIPE
and user space was thinking sendmsg() succeeded since EPIPE is
a positive value, thinking we submitted 32 bytes. Fix it by
negating the sk->sk_err value.
Fixes: 4f738adba3 ("bpf: create tcp_bpf_ulp allowing BPF to monitor socket TX/RX data")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-08-07
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add cgroup local storage for BPF programs, which provides a fast
accessible memory for storing various per-cgroup data like number
of transmitted packets, etc, from Roman.
2) Support bpf_get_socket_cookie() BPF helper in several more program
types that have a full socket available, from Andrey.
3) Significantly improve the performance of perf events which are
reported from BPF offload. Also convert a couple of BPF AF_XDP
samples overto use libbpf, both from Jakub.
4) seg6local LWT provides the End.DT6 action, which allows to
decapsulate an outer IPv6 header containing a Segment Routing Header.
Adds this action now to the seg6local BPF interface, from Mathieu.
5) Do not mark dst register as unbounded in MOV64 instruction when
both src and dst register are the same, from Arthur.
6) Define u_smp_rmb() and u_smp_wmb() to their respective barrier
instructions on arm64 for the AF_XDP sample code, from Brian.
7) Convert the tcp_client.py and tcp_server.py BPF selftest scripts
over from Python 2 to Python 3, from Jeremy.
8) Enable BTF build flags to the BPF sample code Makefile, from Taeung.
9) Remove an unnecessary rcu_read_lock() in run_lwt_bpf(), from Taehee.
10) Several improvements to the README.rst from the BPF documentation
to make it more consistent with RST format, from Tobin.
11) Replace all occurrences of strerror() by calls to strerror_r()
in libbpf and fix a FORTIFY_SOURCE build error along with it,
from Thomas.
12) Fix a bug in bpftool's get_btf() function to correctly propagate
an error via PTR_ERR(), from Yue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
__cgroup_bpf_attach() and __cgroup_bpf_detach() functions have
a good amount of duplicated code, which is possible to eliminate
by introducing the update_effective_progs() helper function.
The update_effective_progs() calls compute_effective_progs()
and then in case of success it calls activate_effective_progs()
for each descendant cgroup. In case of failure (OOM), it releases
allocated prog arrays and return the error code.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Josh reported that the late SMT evaluation in cpu_smt_state_init() sets
cpu_smt_control to CPU_SMT_NOT_SUPPORTED in case that 'nosmt' was supplied
on the kernel command line as it cannot differentiate between SMT disabled
by BIOS and SMT soft disable via 'nosmt'. That wreckages the state and
makes the sysfs interface unusable.
Rework this so that during bringup of the non boot CPUs the availability of
SMT is determined in cpu_smt_allowed(). If a newly booted CPU is not a
'primary' thread then set the local cpu_smt_available marker and evaluate
this explicitely right after the initial SMP bringup has finished.
SMT evaulation on x86 is a trainwreck as the firmware has all the
information _before_ booting the kernel, but there is no interface to query
it.
Fixes: 73d5e2b472 ("cpu/hotplug: detect SMT disabled by BIOS")
Reported-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Recently we tried to make the preemptirqsoff tracer to use irqsoff
tracepoint probes. However this causes issues as reported by Masami:
[2.271078] Testing tracer preemptirqsoff: .. no entries found ..FAILED!
[2.381015] WARNING: CPU: 0 PID: 1 at /home/mhiramat/ksrc/linux/kernel/
trace/trace.c:1512 run_tracer_selftest+0xf3/0x154
This is due to the tracepoint code increasing the preempt nesting count
by calling an additional preempt_disable before calling into the
preemptoff tracer which messes up the preempt_count() check in
tracer_hardirqs_off.
To fix this, make the irqsoff tracer probes balance the additional outer
preempt_disable with a preempt_enable_notrace.
The other way to fix this is to just use SRCU for all tracepoints.
However we can't do that because we can't use NMIs from RCU context.
Link: http://lkml.kernel.org/r/20180806034049.67949-1-joel@joelfernandes.org
Fixes: c3bc8fd637 ("tracing: Centralize preemptirq tracepoints and unify their usage")
Fixes: e6753f23d9 ("tracepoint: Make rcuidle tracepoint callers use SRCU")
Reported-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- GICv3 ITS LPI allocation revamp
- GICv3 support for hypervisor-enforced LPI range
- GICv3 ITS conversion to raw spinlock
-----BEGIN PGP SIGNATURE-----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=gKw8
-----END PGP SIGNATURE-----
Merge tag 'irqchip-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- GICv3 ITS LPI allocation revamp
- GICv3 support for hypervisor-enforced LPI range
- GICv3 ITS conversion to raw spinlock
At present, "systemctl suspend" and "shutdown" can run in parrallel. A
system can suspend after devices_shutdown(), and resume. Then the shutdown
task goes on to power off. This causes many devices are not really shut
off. Hence replacing reboot_mutex with system_transition_mutex (renamed
from pm_mutex) to achieve the exclusion. The renaming of pm_mutex as
system_transition_mutex can be better to reflect the purpose of the mutex.
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This addresses Coverity-ID: 114713 ("Missing break in switch").
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAltU8z0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG5X8H/2fJr7m3k242+t76
sitwvx1eoPqTgryW59dRKm9IuXAGA+AjauvHzaz1QxomeQa50JghGWefD0eiJfkA
1AphQ/24EOiAbbVk084dAI/C2p122dE4D5Fy7CrfLnuouyrbFaZI5STbnrRct7sR
9deeYW0GDHO1Uenp4WDCj0baaqJqaevZ+7GG09DnWpya2nQtSkGBjqn6GpYmrfOU
mqFuxAX8mEOW6cwK16y/vYtnVjuuMAiZ63/OJ8AQ6d6ArGLwAsdn7f8Fn4I4tEr2
L0d3CRLUyegms4++Dmlu05k64buQu46WlPhjCZc5/Ts4kjrNxBuHejj2/jeSnUSt
vJJlibI=
=42a5
-----END PGP SIGNATURE-----
Merge tag 'v4.18-rc6' into for-4.19/block2
Pull in 4.18-rc6 to get the NVMe core AEN change to avoid a
merge conflict down the line.
Signed-of-by: Jens Axboe <axboe@kernel.dk>
When cpu_stop_queue_work() releases the lock for the stopper
thread that was queued into its wake queue, preemption is
enabled, which leads to the following deadlock:
CPU0 CPU1
sched_setaffinity(0, ...)
__set_cpus_allowed_ptr()
stop_one_cpu(0, ...) stop_two_cpus(0, 1, ...)
cpu_stop_queue_work(0, ...) cpu_stop_queue_two_works(0, ..., 1, ...)
-grabs lock for migration/0-
-spins with preemption disabled,
waiting for migration/0's lock to be
released-
-adds work items for migration/0
and queues migration/0 to its
wake_q-
-releases lock for migration/0
and preemption is enabled-
-current thread is preempted,
and __set_cpus_allowed_ptr
has changed the thread's
cpu allowed mask to CPU1 only-
-acquires migration/0 and migration/1's
locks-
-adds work for migration/0 but does not
add migration/0 to wake_q, since it is
already in a wake_q-
-adds work for migration/1 and adds
migration/1 to its wake_q-
-releases migration/0 and migration/1's
locks, wakes migration/1, and enables
preemption-
-since migration/1 is requested to run,
migration/1 begins to run and waits on
migration/0, but migration/0 will never
be able to run, since the thread that
can wake it is affine to CPU1-
Disable preemption in cpu_stop_queue_work() before queueing works for
stopper threads, and queueing the stopper thread in the wake queue, to
ensure that the operation of queueing the works and waking the stopper
threads is atomic.
Fixes: 0b26351b91 ("stop_machine, sched: Fix migrate_swap() vs. active_balance() deadlock")
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: peterz@infradead.org
Cc: matt@codeblueprint.co.uk
Cc: bigeasy@linutronix.de
Cc: gregkh@linuxfoundation.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1533329766-4856-1-git-send-email-isaacm@codeaurora.org
Co-Developed-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Pull timer fixes from Thomas Gleixner:
"Two oneliners addressing NOHZ failures:
- Use a bitmask to check for the pending timer softirq and not the
bit number. The existing code using the bit number checked for
the wrong bit, which caused timers to either expire late or stop
completely.
- Make the nohz evaluation on interrupt exit more robust. The
existing code did not re-arm the hardware when interrupting a
running softirq in task context (ksoftirqd or tail of
local_bh_enable()), which caused timers to either expire late
or stop completely"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
nohz: Fix missing tick reprogram when interrupting an inline softirq
nohz: Fix local_timer_softirq_pending()
There are only two signals that are delivered to every member of a
signal group: SIGSTOP and SIGKILL. Signal delivery requires every
signal appear to be delivered either before or after a clone syscall.
SIGKILL terminates the clone so does not need to be considered. Which
leaves only SIGSTOP that needs to be considered when creating new
threads.
Today in the event of a group stop TIF_SIGPENDING will get set and the
fork will restart ensuring the fork syscall participates in the group
stop.
A fork (especially of a process with a lot of memory) is one of the
most expensive system so we really only want to restart a fork when
necessary.
It is easy so check to see if a SIGSTOP is ongoing and have the new
thread join it immediate after the clone completes. Making it appear
the clone completed happened just before the SIGSTOP.
The calculate_sigpending function will see the bits set in jobctl and
set TIF_SIGPENDING to ensure the new task takes the slow path to userspace.
V2: The call to task_join_group_stop was moved before the new task is
added to the thread group list. This should not matter as
sighand->siglock is held over both the addition of the threads,
the call to task_join_group_stop and do_signal_stop. But the change
is trivial and it is one less thing to worry about when reading
the code.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Add a function calculate_sigpending to test to see if any signals are
pending for a new task immediately following fork. Signals have to
happen either before or after fork. Today our practice is to push
all of the signals to before the fork, but that has the downside that
frequent or periodic signals can make fork take much much longer than
normal or prevent fork from completing entirely.
So we need move signals that we can after the fork to prevent that.
This updates the code to set TIF_SIGPENDING on a new task if there
are signals or other activities that have moved so that they appear
to happen after the fork.
As the code today restarts if it sees any such activity this won't
immediately have an effect, as there will be no reason for it
to set TIF_SIGPENDING immediately after the fork.
Adding calculate_sigpending means the code in fork can safely be
changed to not always restart if a signal is pending.
The new calculate_sigpending function sets sigpending if there
are pending bits in jobctl, pending signals, the freezer needs
to freeze the new task or the live kernel patching framework
need the new thread to take the slow path to userspace.
I have verified that setting TIF_SIGPENDING does make a new process
take the slow path to userspace before it executes it's first userspace
instruction.
I have looked at the callers of signal_wake_up and the code paths
setting TIF_SIGPENDING and I don't see anything else that needs to be
handled. The code probably doesn't need to set TIF_SIGPENDING for the
kernel live patching as it uses a separate thread flag as well. But
at this point it seems safer reuse the recalc_sigpending logic and get
the kernel live patching folks to sort out their story later.
V2: I have moved the test into schedule_tail where siglock can
be grabbed and recalc_sigpending can be reused directly.
Further as the last action of setting up a new task this
guarantees that TIF_SIGPENDING will be properly set in the
new process.
The helper calculate_sigpending takes the siglock and
uncontitionally sets TIF_SIGPENDING and let's recalc_sigpending
clear TIF_SIGPENDING if it is unnecessary. This allows reusing
the existing code and keeps maintenance of the conditions simple.
Oleg Nesterov <oleg@redhat.com> suggested the movement
and pointed out the need to take siglock if this code
was going to be called while the new task is discoverable.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The full nohz tick is reprogrammed in irq_exit() only if the exit is not in
a nesting interrupt. This stands as an optimization: whether a hardirq or a
softirq is interrupted, the tick is going to be reprogrammed when necessary
at the end of the inner interrupt, with even potential new updates on the
timer queue.
When soft interrupts are interrupted, it's assumed that they are executing
on the tail of an interrupt return. In that case tick_nohz_irq_exit() is
called after softirq processing to take care of the tick reprogramming.
But the assumption is wrong: softirqs can be processed inline as well, ie:
outside of an interrupt, like in a call to local_bh_enable() or from
ksoftirqd.
Inline softirqs don't reprogram the tick once they are done, as opposed to
interrupt tail softirq processing. So if a tick interrupts an inline
softirq processing, the next timer will neither be reprogrammed from the
interrupting tick's irq_exit() nor after the interrupted softirq
processing. This situation may leave the tick unprogrammed while timers are
armed.
To fix this, simply keep reprogramming the tick even if a softirq has been
interrupted. That can be optimized further, but for now correctness is more
important.
Note that new timers enqueued in nohz_full mode after a softirq gets
interrupted will still be handled just fine through self-IPIs triggered by
the timer code.
Reported-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: stable@vger.kernel.org # 4.14+
Link: https://lkml.kernel.org/r/1533303094-15855-1-git-send-email-frederic@kernel.org
The support of force threading interrupts which are set up with both a
primary and a threaded handler wreckaged the setup of regular requested
threaded interrupts (primary handler == NULL).
The reason is that it does not check whether the primary handler is set to
the default handler which wakes the handler thread. Instead it replaces the
thread handler with the primary handler as it would do with force threaded
interrupts which have been requested via request_irq(). So both the primary
and the thread handler become the same which then triggers the warnon that
the thread handler tries to wakeup a not configured secondary thread.
Fortunately this only happens when the driver omits the IRQF_ONESHOT flag
when requesting the threaded interrupt, which is normaly caught by the
sanity checks when force irq threading is disabled.
Fix it by skipping the force threading setup when a regular threaded
interrupt is requested. As a consequence the interrupt request which lacks
the IRQ_ONESHOT flag is rejected correctly instead of silently wreckaging
it.
Fixes: 2a1d3ab898 ("genirq: Handle force threading of irqs with primary and thread handler")
Reported-by: Kurt Kanzenbach <kurt.kanzenbach@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kurt Kanzenbach <kurt.kanzenbach@linutronix.de>
Cc: stable@vger.kernel.org
Code is emitting the following error message during boot on systems
without PMU hardware support while probing NMI capability.
NMI watchdog: Perf event create on CPU 0 failed with -2
This error is emitted as the perf subsystem returns -ENOENT due to lack of
PMUs in the system.
It is followed by the warning that NMI watchdog is disabled:
NMI watchdog: Perf NMI watchdog permanently disabled
While NMI disabled information is useful for ordinary users, seeing a PERF
event create failed with error code -2 is not.
Reduce the message severity to debug so that if debugging is still possible
in case the error code returned by perf is required for analysis.
Signed-off-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Don Zickus <dzickus@redhat.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=599368
Link: https://lkml.kernel.org/r/20180803060943.2643-1-okaya@kernel.org
The bpf_get_local_storage() helper function is used
to get a pointer to the bpf local storage from a bpf program.
It takes a pointer to a storage map and flags as arguments.
Right now it accepts only cgroup storage maps, and flags
argument has to be 0. Further it can be extended to support
other types of local storage: e.g. thread local storage etc.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
As there is one-to-one relation between a bpf program
and cgroup local storage map, there is no sense in
creating a map of cgroup local storage maps.
Forbid it explicitly to avoid possible side effects.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
BPF_MAP_TYPE_CGROUP_STORAGE maps are special in a way
that the access from the bpf program side is lookup-free.
That means the result is guaranteed to be a valid
pointer to the cgroup storage; no NULL-check is required.
This patch introduces BPF_PTR_TO_MAP_VALUE return type,
which is required to cause the verifier accept programs,
which are not checking the map value pointer for being NULL.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch converts bpf_prog_array from an array of prog pointers
to the array of struct bpf_prog_array_item elements.
This allows to save a cgroup storage pointer for each bpf program
efficiently attached to a cgroup.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
If a bpf program is using cgroup local storage, allocate
a bpf_cgroup_storage structure automatically on attaching the program
to a cgroup and save the pointer into the corresponding bpf_prog_list
entry.
Analogically, release the cgroup local storage on detaching
of the bpf program.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This commit introduces the bpf_cgroup_storage_set() helper,
which will be used to pass a pointer to a cgroup storage
to the bpf helper.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This commit introduces BPF_MAP_TYPE_CGROUP_STORAGE maps:
a special type of maps which are implementing the cgroup storage.
>From the userspace point of view it's almost a generic
hash map with the (cgroup inode id, attachment type) pair
used as a key.
The only difference is that some operations are restricted:
1) a user can't create new entries,
2) a user can't remove existing entries.
The lookup from userspace is o(log(n)).
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This commits extends existing bpf maps memory charging API
to support dynamic charging/uncharging.
This is required to account memory used by maps,
if all entries are created dynamically after
the map initialization.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The BTF conflicts were simple overlapping changes.
The virtio_net conflict was an overlap of a fix of statistics counter,
happening alongisde a move over to a bonafide statistics structure
rather than counting value on the stack.
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix within_notrace_func() to check only notrace functions and to ignore the
kprobe-event which can not solve symbol addresses.
within_notrace_func() returns true if the given kprobe events probe point
seems to be out-of-range. But that is not the correct place to check for it,
it should be done in kprobes afterwards.
kprobe-events allow users to define a probe point on "currently unloaded
module" so that it can trace the event during module load. In this case, the
user will put a probe on a symbol which is not in kallsyms yet and it hits
the within_notrace_func(). As a result, kprobe-events always refuses if
user defines a probe on a "currenly unloaded module".
Fixes: commit 45408c4f92 ("tracing: kprobes: Prohibit probing on notrace function")
Link: http://lkml.kernel.org/r/153319624799.29007.13604430345640129926.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
we prefer to the kmemdup rather than kmalloc+memcpy. so just
replace them.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Using cpu_all_mask in clockevents cpumask may result in issues while
comparing multiple clockevent devices to choose the preferred one.
On one of the platforms with 2 system (i.e. non per-CPU) timers with
different ratings, having cpu_all_mask for one of the device resulted in a
boot hang due to a endless loop in clockevents_notify_released() as both
were clocksources were selected as preferred.
In order to prevent such issues in the future, warn if any clockevent
driver sets cpu_all_mask as it's cpumask and just override it to use
cpu_possible_mask. All the existing occurrences of cpu_all_mask are already
replaced with cpu_possible_mask.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lkml.kernel.org/r/1531308264-24220-3-git-send-email-sudeep.holla@arm.com
This is the last instance of cpu_all_mask usage in the core framework.
Replace it with cpu_possible_mask like all other instances in the
clockevent drivers. This makes it possible to add a warning in the core
clockevents_register_device on usage of cpu_all_mask from any clockevent
drivers in the future.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lkml.kernel.org/r/1531308264-24220-2-git-send-email-sudeep.holla@arm.com
timer_base::must_forward_clock is indicating that the base clock might be
stale due to a long idle sleep.
The forwarding of the base clock takes place in the timer softirq or when a
timer is enqueued to a base which is idle. If the enqueue of timer to an
idle base happens from a remote CPU, then the following race can happen:
CPU0 CPU1
run_timer_softirq mod_timer
base = lock_timer_base(timer);
base->must_forward_clk = false
if (base->must_forward_clk)
forward(base); -> skipped
enqueue_timer(base, timer, idx);
-> idx is calculated high due to
stale base
unlock_timer_base(timer);
base = lock_timer_base(timer);
forward(base);
The root cause is that timer_base::must_forward_clk is cleared outside the
timer_base::lock held region, so the remote queuing CPU observes it as
cleared, but the base clock is still stale. This can cause large
granularity values for timers, i.e. the accuracy of the expiry time
suffers.
Prevent this by clearing the flag with timer_base::lock held, so that the
forwarding takes place before the cleared flag is observable by a remote
CPU.
Signed-off-by: Gaurav Kohli <gkohli@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john.stultz@linaro.org
Cc: sboyd@kernel.org
Cc: linux-arm-msm@vger.kernel.org
Link: https://lkml.kernel.org/r/1533199863-22748-1-git-send-email-gkohli@codeaurora.org
Return statements in functions returning bool should use true or false
instead of an integer value.
This code was detected with the help of Coccinelle.
Link: http://lkml.kernel.org/r/20180802010056.GA31012@embeddedor.com
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The value of ring_buffer_record_is_set_on() is either true or false, so have
its return value be bool.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The value of ring_buffer_record_is_on() is either true or false, so have its
return value be bool.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Almost all architectures include it. Add a ARCH_NO_PREEMPT symbol to
disable preempt support for alpha, hexagon, non-coldfire m68k and
user mode Linux.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
There's code that expects tracer_tracing_is_on() to be either true or false,
not some random number. Currently, it should only return one or zero, but
just in case, change its return value to bool, to enforce it.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The start function of the hwlat tracer should never be called when the hwlat
thread already exists. If it is called, do a WARN_ON().
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The hwlat tracer uses a kernel thread to measure latencies. The function
that creates this kernel thread, start_kthread(), can be called when the
tracer is initialized and when the tracer is explicitly enabled.
start_kthread() does not check if there is an existing hwlat kernel
thread and will create a new one each time it is called.
This causes the reference to the previous thread to be lost. Without the
thread reference, the old kernel thread becomes unstoppable and
continues to use CPU time even after the hwlat tracer has been disabled.
This problem can be observed when a system is booted with tracing
enabled and the hwlat tracer is configured like this:
echo hwlat > current_tracer; echo 1 > tracing_on
Add the missing check for an existing kernel thread in start_kthread()
to prevent this problem. This function and the rest of the hwlat kernel
thread setup and teardown are already serialized because they are called
through the tracer core code with trace_type_lock held.
[
Note, this only fixes the symptom. The real fix was not to call
this function when tracing_on was already one. But this still makes
the code more robust, so we'll add it.
]
Link: http://lkml.kernel.org/r/1533120354-22923-1-git-send-email-erica.bugden@linutronix.de
Signed-off-by: Erica Bugden <erica.bugden@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently, when one echo's in 1 into tracing_on, the current tracer's
"start()" function is executed, even if tracing_on was already one. This can
lead to strange side effects. One being that if the hwlat tracer is enabled,
and someone does "echo 1 > tracing_on" into tracing_on, the hwlat tracer's
start() function is called again which will recreate another kernel thread,
and make it unable to remove the old one.
Link: http://lkml.kernel.org/r/1533120354-22923-1-git-send-email-erica.bugden@linutronix.de
Cc: stable@vger.kernel.org
Fixes: 2df8f8a6a8 ("tracing: Fix regression with irqsoff tracer and tracing_on file")
Reported-by: Erica Bugden <erica.bugden@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
We were hitting a panic in production where we put too many times on the
request queue. This is because we'd get the throttle_queue of the
parent if we fork()'ed while we needed to be throttled, but we didn't
have a reference on it. Instead just clear these flags on fork so the
child doesn't pay for the sins of its father.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=MN3z
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20180731' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fix from Paul Moore:
"A single small audit fix to guard against memory allocation failures
when logging information about a kernel module load.
It's small, easy to understand, and self-contained; while nothing is
zero risk, this should be pretty low"
* tag 'audit-pr-20180731' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: fix potential null dereference 'context->module.name'
When check_alu_op() handles a BPF_MOV64 between two registers,
it calls check_reg_arg(DST_OP) on the dst register, marking it
as unbounded. If the src and dst register are the same, this
marks the src as unbounded, which can lead to unexpected errors
for further checks that rely on bounds info. For example:
BPF_MOV64_IMM(BPF_REG_2, 0),
BPF_MOV64_REG(BPF_REG_2, BPF_REG_2),
BPF_ALU64_REG(BPF_ADD, BPF_REG_1, BPF_REG_2),
BPF_MOV64_IMM(BPF_REG_0, 0),
BPF_EXIT_INSN(),
Results in:
"math between ctx pointer and register with unbounded
min value is not allowed"
check_alu_op() now uses check_reg_arg(DST_OP_NO_MARK), and MOVs
that need to mark the dst register (MOVIMM, MOV32) do so.
Added a test case for MOV64 dst == src, and dst != src.
Signed-off-by: Arthur Fabre <afabre@cloudflare.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
local_timer_softirq_pending() checks whether the timer softirq is
pending with: local_softirq_pending() & TIMER_SOFTIRQ.
This is wrong because TIMER_SOFTIRQ is the softirq number and not a
bitmask. So the test checks for the wrong bit.
Use BIT(TIMER_SOFTIRQ) instead.
Fixes: 5d62c183f9 ("nohz: Prevent a timer interrupt storm in tick_nohz_stop_sched_tick()")
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Cc: bigeasy@linutronix.de
Cc: peterz@infradead.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180731161358.29472-1-anna-maria@linutronix.de
This patch detaches the preemptirq tracepoints from the tracers and
keeps it separate.
Advantages:
* Lockdep and irqsoff event can now run in parallel since they no longer
have their own calls.
* This unifies the usecase of adding hooks to an irqsoff and irqson
event, and a preemptoff and preempton event.
3 users of the events exist:
- Lockdep
- irqsoff and preemptoff tracers
- irqs and preempt trace events
The unification cleans up several ifdefs and makes the code in preempt
tracer and irqsoff tracers simpler. It gets rid of all the horrific
ifdeferry around PROVE_LOCKING and makes configuration of the different
users of the tracepoints more easy and understandable. It also gets rid
of the time_* function calls from the lockdep hooks used to call into
the preemptirq tracer which is not needed anymore. The negative delta in
lines of code in this patch is quite large too.
In the patch we introduce a new CONFIG option PREEMPTIRQ_TRACEPOINTS
as a single point for registering probes onto the tracepoints. With
this,
the web of config options for preempt/irq toggle tracepoints and its
users becomes:
PREEMPT_TRACER PREEMPTIRQ_EVENTS IRQSOFF_TRACER PROVE_LOCKING
| | \ | |
\ (selects) / \ \ (selects) /
TRACE_PREEMPT_TOGGLE ----> TRACE_IRQFLAGS
\ /
\ (depends on) /
PREEMPTIRQ_TRACEPOINTS
Other than the performance tests mentioned in the previous patch, I also
ran the locking API test suite. I verified that all tests cases are
passing.
I also injected issues by not registering lockdep probes onto the
tracepoints and I see failures to confirm that the probes are indeed
working.
This series + lockdep probes not registered (just to inject errors):
[ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/12:FAILED|FAILED| ok |
[ 0.000000] sirq-safe-A => hirqs-on/21:FAILED|FAILED| ok |
[ 0.000000] hard-safe-A + irqs-on/12:FAILED|FAILED| ok |
[ 0.000000] soft-safe-A + irqs-on/12:FAILED|FAILED| ok |
[ 0.000000] hard-safe-A + irqs-on/21:FAILED|FAILED| ok |
[ 0.000000] soft-safe-A + irqs-on/21:FAILED|FAILED| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
With this series + lockdep probes registered, all locking tests pass:
[ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 0.000000] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000000] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000000] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000000] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
Link: http://lkml.kernel.org/r/20180730222423.196630-4-joel@joelfernandes.org
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The macro WARN_CONSOLE_UNLOCKED prints a warning when a thread enters
the console's critical section without having acquired the console
lock. The console lock can be ignored when debugging the console using
printk, but this makes WARN_CONSOLE_UNLOCKED generate unnecessary
warnings.
The variable ignore_console_lock_warning temporarily disables
WARN_CONSOLE_UNLOCKED. Developers interested in debugging the console's
critical sections should increment it before entering the CS and
decrement it after leaving the CS. Setting ignore_console_lock_warning
is only for debugging. Regular operation should not manipulate it.
Acknoledgements: This patch is based on an earlier version by Steven
Rostedt. The use of atomic increment/decrement was suggested by Petr
Mladek.
Link: http://lkml.kernel.org/r/717e6337-e7a6-7a92-1c1b-8929a25696b5@suse.de
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
[b.zolnierkie: use <linux/atomic.h>]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
It is useful to get the running time of a thread. Doing so in an
efficient manner can be important for performance of user applications.
Avoiding system calls in `clock_gettime` when handling
CLOCK_THREAD_CPUTIME_ID is important. Other clocks are handled in the
VDSO, but CLOCK_THREAD_CPUTIME_ID falls back on the system call.
CLOCK_THREAD_CPUTIME_ID is not handled in the VDSO since it would have
costs associated with maintaining updated user space accessible time
offsets. These offsets have to be updated everytime the a thread is
scheduled/descheduled. However, for programs regularly checking the
running time of a thread, this is a performance improvement.
This patch takes a middle ground, and adds support for cap_user_time an
optional feature of the perf_event API. This way costs are only
incurred when the perf_event api is enabled. This is done the same way
as it is in x86.
Ultimately this allows calculating the thread running time in userspace
on aarch64 as follows (adapted from perf_event_open manpage):
u32 seq, time_mult, time_shift;
u64 running, count, time_offset, quot, rem, delta;
struct perf_event_mmap_page *pc;
pc = buf; // buf is the perf event mmaped page as documented in the API.
if (pc->cap_usr_time) {
do {
seq = pc->lock;
barrier();
running = pc->time_running;
count = readCNTVCT_EL0(); // Read ARM hardware clock.
time_offset = pc->time_offset;
time_mult = pc->time_mult;
time_shift = pc->time_shift;
barrier();
} while (pc->lock != seq);
quot = (count >> time_shift);
rem = count & (((u64)1 << time_shift) - 1);
delta = time_offset + quot * time_mult +
((rem * time_mult) >> time_shift);
running += delta;
// running now has the current nanosecond level thread time.
}
Summary of changes in the patch:
For aarch64 systems, make arch_perf_update_userpage update the timing
information stored in the perf_event page. Requiring the following
calculations:
- Calculate the appropriate time_mult, and time_shift factors to convert
ticks to nano seconds for the current clock frequency.
- Adjust the mult and shift factors to avoid shift factors of 32 bits.
(possibly unnecessary)
- The time_offset userspace should apply when doing calculations:
negative the current sched time (now), because time_running and
time_enabled fields of the perf_event page have just been updated.
Toggle bits to appropriate values:
- Enable cap_user_time
Signed-off-by: Michael O'Farrell <micpof@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Pull networking fixes from David Miller:
"Several smallish fixes, I don't think any of this requires another -rc
but I'll leave that up to you:
1) Don't leak uninitialzed bytes to userspace in xfrm_user, from Eric
Dumazet.
2) Route leak in xfrm_lookup_route(), from Tommi Rantala.
3) Premature poll() returns in AF_XDP, from Björn Töpel.
4) devlink leak in netdevsim, from Jakub Kicinski.
5) Don't BUG_ON in fib_compute_spec_dst, the condition can
legitimately happen. From Lorenzo Bianconi.
6) Fix some spectre v1 gadgets in generic socket code, from Jeremy
Cline.
7) Don't allow user to bind to out of range multicast groups, from
Dmitry Safonov with a follow-up by Dmitry Safonov.
8) Fix metrics leak in fib6_drop_pcpu_from(), from Sabrina Dubroca"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits)
netlink: Don't shift with UB on nlk->ngroups
net/ipv6: fix metrics leak
xen-netfront: wait xenbus state change when load module manually
can: ems_usb: Fix memory leak on ems_usb_disconnect()
openvswitch: meter: Fix setting meter id for new entries
netlink: Do not subscribe to non-existent groups
NET: stmmac: align DMA stuff to largest cache line length
tcp_bbr: fix bw probing to raise in-flight data for very small BDPs
net: socket: Fix potential spectre v1 gadget in sock_is_registered
net: socket: fix potential spectre v1 gadget in socketcall
net: mdio-mux: bcm-iproc: fix wrong getter and setter pair
ipv4: remove BUG_ON() from fib_compute_spec_dst
enic: handle mtu change for vf properly
net: lan78xx: fix rx handling before first packet is send
nfp: flower: fix port metadata conversion bug
bpf: use GFP_ATOMIC instead of GFP_KERNEL in bpf_parse_prog()
bpf: fix bpf_skb_load_bytes_relative pkt length check
perf build: Build error in libbpf missing initialization
net: ena: Fix use of uninitialized DMA address bits field
bpf: btf: Use exact btf value_size match in map_check_btf()
...
In recent tests with IRQ on/off tracepoints, a large performance
overhead ~10% is noticed when running hackbench. This is root caused to
calls to rcu_irq_enter_irqson and rcu_irq_exit_irqson from the
tracepoint code. Following a long discussion on the list [1] about this,
we concluded that srcu is a better alternative for use during rcu idle.
Although it does involve extra barriers, its lighter than the sched-rcu
version which has to do additional RCU calls to notify RCU idle about
entry into RCU sections.
In this patch, we change the underlying implementation of the
trace_*_rcuidle API to use SRCU. This has shown to improve performance
alot for the high frequency irq enable/disable tracepoints.
Test: Tested idle and preempt/irq tracepoints.
Here are some performance numbers:
With a run of the following 30 times on a single core x86 Qemu instance
with 1GB memory:
hackbench -g 4 -f 2 -l 3000
Completion times in seconds. CONFIG_PROVE_LOCKING=y.
No patches (without this series)
Mean: 3.048
Median: 3.025
Std Dev: 0.064
With Lockdep using irq tracepoints with RCU implementation:
Mean: 3.451 (-11.66 %)
Median: 3.447 (-12.22%)
Std Dev: 0.049
With Lockdep using irq tracepoints with SRCU implementation (this series):
Mean: 3.020 (I would consider the improvement against the "without
this series" case as just noise).
Median: 3.013
Std Dev: 0.033
[1] https://patchwork.kernel.org/patch/10344297/
[remove rcu_read_lock_sched_notrace as its the equivalent of
preempt_disable_notrace and is unnecessary to call in tracepoint code]
Link: http://lkml.kernel.org/r/20180730222423.196630-3-joel@joelfernandes.org
Cleaned-up-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
[ Simplified WARN_ON_ONCE() ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
get_cpu_var disables preemption which has the potential to call into the
preemption disable trace points causing some complications. There's also
no need to disable preemption in uses of get_lock_stats anyway since
preempt is already disabled. So lets simplify the code.
Link: http://lkml.kernel.org/r/20180730222423.196630-2-joel@joelfernandes.org
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Move selftest function to its own compile unit so it can be compiled
with the ftrace cflags (CC_FLAGS_FTRACE) allowing it to be probed
during the ftrace startup tests.
Link: http://lkml.kernel.org/r/153294604271.32740.16490677128630177030.stgit@devbox
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Prohibit kprobe-events probing on notrace functions. Since probing on a
notrace function can cause a recursive event call. In most cases those are just
skipped, but in some cases it falls into an infinite recursive call.
This protection can be disabled by the kconfig
CONFIG_KPROBE_EVENTS_ON_NOTRACE=y, but it is highly recommended to keep it
"n" for normal kernel builds. Note that this is only available if "kprobes on
ftrace" has been implemented on the target arch and CONFIG_KPROBES_ON_FTRACE=y.
Link: http://lkml.kernel.org/r/153294601436.32740.10557881188933661239.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Francis Deslauriers <francis.deslauriers@efficios.com>
[ Slight grammar and spelling fixes ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The variable 'context->module.name' may be null pointer when
kmalloc return null, so it's better to check it before using
to avoid null dereference.
Another one more thing this patch does is using kstrdup instead
of (kmalloc + strcpy), and signal a lost record via audit_log_lost.
Cc: stable@vger.kernel.org # 4.11
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
After commit 249d4a9b3246 ("timers: Reinitialize per cpu bases on hotplug")
i.e. the introduction of state CPUHP_TIMERS_PREPARE instead of
CPUHP_TIMERS_DEAD the step name "timers:dead" is not longer accurate.
Rename it to "timers:prepare".
[ tglx: Massaged changelog ]
Signed-off-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: gkohli@codeaurora.org
Cc: neeraju@codeaurora.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Brendan Jackman <brendan.jackman@arm.com>
Cc: Mathieu Malaterre <malat@debian.org>
Link: https://lkml.kernel.org/r/1532443668-26810-1-git-send-email-mojha@codeaurora.org
Pull scheduler fixes from Ingo Molnar:
"Misc fixes:
- a deadline scheduler related bug fix which triggered a kernel
warning
- an RT_RUNTIME_SHARE fix
- a stop_machine preemption fix
- a potential NULL dereference fix in sched_domain_debug_one()"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/rt: Restore rt_runtime after disabling RT_RUNTIME_SHARE
sched/deadline: Update rq_clock of later_rq when pushing a task
stop_machine: Disable preemption after queueing stopper threads
sched/topology: Check variable group before dereferencing it
Pull locking fixes from Ingo Molnar:
"A paravirt UP-patching fix, and an I2C MUX driver lockdep warning fix"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/pvqspinlock/x86: Use LOCK_PREFIX in __pv_queued_spin_unlock() assembly code
i2c/mux, locking/core: Annotate the nested rt_mutex usage
locking/rtmutex: Allow specifying a subclass for nested locking
sched_clock_init() used be called early during boot when interrupts were
still disabled. After the recent changes to utilize sched clock early the
sched_clock_init() call happens when interrupts are already enabled, which
triggers the following warning:
WARNING: CPU: 0 PID: 0 at kernel/time/sched_clock.c:180 sched_clock_register+0x44/0x278
[<c001a13c>] (warn_slowpath_null) from [<c052367c>] (sched_clock_register+0x44/0x278)
[<c052367c>] (sched_clock_register) from [<c05238d8>] (generic_sched_clock_init+0x28/0x88)
[<c05238d8>] (generic_sched_clock_init) from [<c0521a00>] (sched_clock_init+0x54/0x74)
[<c0521a00>] (sched_clock_init) from [<c0519c18>] (start_kernel+0x310/0x3e4)
[<c0519c18>] (start_kernel) from [<00000000>] ( (null))
Disable IRQs for the duration of generic_sched_clock_init().
Fixes: 857baa87b6 ("sched/clock: Enable sched clock early")
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: steven.sistare@oracle.com
Cc: daniel.m.jordan@oracle.com
Link: https://lkml.kernel.org/r/20180730135252.24599-1-pasha.tatashin@oracle.com
Daniel Borkmann says:
====================
pull-request: bpf 2018-07-28
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) API fixes for libbpf's BTF mapping of map key/value types in order
to make them compatible with iproute2's BPF_ANNOTATE_KV_PAIR()
markings, from Martin.
2) Fix AF_XDP to not report POLLIN prematurely by using the non-cached
consumer pointer of the RX queue, from Björn.
3) Fix __xdp_return() to check for NULL pointer after the rhashtable
lookup that retrieves the allocator object, from Taehee.
4) Fix x86-32 JIT to adjust ebp register in prologue and epilogue
by 4 bytes which got removed from overall stack usage, from Wang.
5) Fix bpf_skb_load_bytes_relative() length check to use actual
packet length, from Daniel.
6) Fix uninitialized return code in libbpf bpf_perf_event_read_simple()
handler, from Thomas.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Automatically found by kbuild test robot.
Fixes: ffdc73a3b2ad ("lib: Add module for testing preemptoff/irqsoff latency tracers")
Signed-off-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Merge misc fixes from Andrew Morton:
"11 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kvm, mm: account shadow page tables to kmemcg
zswap: re-check zswap_is_full() after do zswap_shrink()
include/linux/eventfd.h: include linux/errno.h
mm: fix vma_is_anonymous() false-positives
mm: use vma_init() to initialize VMAs on stack and data segments
mm: introduce vma_init()
mm: fix exports that inadvertently make put_page() EXPORT_SYMBOL_GPL
ipc/sem.c: prevent queue.status tearing in semop
mm: disallow mappings that conflict for devm_memremap_pages()
kasan: only select SLUB_DEBUG with SYSFS=y
delayacct: fix crash in delayacct_blkio_end() after delayacct init failure
Whilst the notion of an upstream DMA restriction is most commonly seen
in PCI host bridges saddled with a 32-bit native interface, a more
general version of the same issue can exist on complex SoCs where a bus
or point-to-point interconnect link from a device's DMA master interface
to another component along the path to memory (often an IOMMU) may carry
fewer address bits than the interfaces at both ends nominally support.
In order to properly deal with this, the first step is to expand the
dma_32bit_limit flag into an arbitrary mask.
To minimise the impact on existing code, we'll make sure to only
consider this new mask valid if set. That makes sense anyway, since a
mask of zero would represent DMA not being wired up at all, and that
would be better handled by not providing valid ops in the first place.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
- Fix double free when the reg() call fails in event_trigger_callback()
- Fix anomoly of snapshot causing tracing_on flag to change
- Add selftest to test snapshot and tracing_on affecting each other
- Fix setting of tracepoint flag on error that prevents probes from
being deleted.
- Fix another possible double free that is similar to event_trigger_callback()
- Quiet a gcc warning of a false positive unused variable
- Fix crash of partial exposed task->comm to trace events
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW1pToBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qijEAQCzqQsnlO6YBCYajRBq2wFaM7J6tVnJ
LxLZlVE8lJlHZQD/YpyGOPq98CB81BfQV7RA/CAVd4RZAhTjldDgGyfL/QI=
=wU8I
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various fixes to the tracing infrastructure:
- Fix double free when the reg() call fails in
event_trigger_callback()
- Fix anomoly of snapshot causing tracing_on flag to change
- Add selftest to test snapshot and tracing_on affecting each other
- Fix setting of tracepoint flag on error that prevents probes from
being deleted.
- Fix another possible double free that is similar to
event_trigger_callback()
- Quiet a gcc warning of a false positive unused variable
- Fix crash of partial exposed task->comm to trace events"
* tag 'trace-v4.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
kthread, tracing: Don't expose half-written comm when creating kthreads
tracing: Quiet gcc warning about maybe unused link variable
tracing: Fix possible double free in event_enable_trigger_func()
tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure
selftests/ftrace: Add snapshot and tracing_on test case
ring_buffer: tracing: Inherit the tracing setting to next ring buffer
tracing: Fix double free of event_trigger_data
The function enable_trace_kprobe() performs slightly differently if the file
parameter is passed in as NULL on non-NULL. Instead of checking file twice,
move the code between the two tests into a static inline helper function to
make the code easier to follow.
Link: http://lkml.kernel.org/r/20180725224728.7b1d5db2@vmware.local.home
Link: http://lkml.kernel.org/r/20180726121152.4dd54330@gandalf.local.home
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Not all VMAs allocated with vm_area_alloc(). Some of them allocated on
stack or in data segment.
The new helper can be use to initialize VMA properly regardless where it
was allocated.
Link: http://lkml.kernel.org/r/20180724121139.62570-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit e763848843 ("mm: introduce MEMORY_DEVICE_FS_DAX and
CONFIG_DEV_PAGEMAP_OPS") added two EXPORT_SYMBOL_GPL() symbols, but
these symbols are required by the inlined put_page(), thus accidentally
making put_page() a GPL export only. This breaks OpenAFS (at least).
Mark them EXPORT_SYMBOL() instead.
Link: http://lkml.kernel.org/r/153128611970.2928.11310692420711601254.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: e763848843 ("mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Joe Gorse <jhgorse@gmail.com>
Reported-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Joe Gorse <jhgorse@gmail.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Mark Vitale <mvitale@sinenomine.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When pmem namespaces created are smaller than section size, this can
cause an issue during removal and gpf was observed:
general protection fault: 0000 1 SMP PTI
CPU: 36 PID: 3941 Comm: ndctl Tainted: G W 4.14.28-1.el7uek.x86_64 #2
task: ffff88acda150000 task.stack: ffffc900233a4000
RIP: 0010:__put_page+0x56/0x79
Call Trace:
devm_memremap_pages_release+0x155/0x23a
release_nodes+0x21e/0x260
devres_release_all+0x3c/0x48
device_release_driver_internal+0x15c/0x207
device_release_driver+0x12/0x14
unbind_store+0xba/0xd8
drv_attr_store+0x27/0x31
sysfs_kf_write+0x3f/0x46
kernfs_fop_write+0x10f/0x18b
__vfs_write+0x3a/0x16d
vfs_write+0xb2/0x1a1
SyS_write+0x55/0xb9
do_syscall_64+0x79/0x1ae
entry_SYSCALL_64_after_hwframe+0x3d/0x0
Add code to check whether we have a mapping already in the same section
and prevent additional mappings from being created if that is the case.
Link: http://lkml.kernel.org/r/152909478401.50143.312364396244072931.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current map_check_btf() in BPF_MAP_TYPE_ARRAY rejects
'> map->value_size' to ensure map_seq_show_elem() will not
access things beyond an array element.
Yonghong suggested that using '!=' is a more correct
check. The 8 bytes round_up on value_size is stored
in array->elem_size. Hence, using '!=' on map->value_size
is a proper check.
This patch also adds new tests to check the btf array
key type and value type. Two of these new tests verify
the btf's value_size (the change in this patch).
It also fixes two existing tests that wrongly encoded
a btf's type size (pprint_test) and the value_type_id (in one
of the raw_tests[]). However, that do not affect these two
BTF verification tests before or after this test changes.
These two tests mainly failed at array creation time after
this patch.
Fixes: a26ca7c982 ("bpf: btf: Add pretty print support to the basic arraymap")
Suggested-by: Yonghong Song <yhs@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The name of the directory for per-cpu function statistics
is trace_stat, not trace_stats.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Remove ftrace_nr_registered_ops() because it is no longer used.
ftrace_nr_registered_ops() has been introduced by commit ea701f11da
("ftrace: Add selftest to test function trace recursion protection"), but
its caller has been removed by commit 05cbbf643b ("tracing: Fix selftest
function recursion accounting"). So it is not called anymore.
Link: http://lkml.kernel.org/r/153260907227.12474.5234899025934963683.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Remove using_ftrace_ops_list_func() since it is no longer used.
Using ftrace_ops_list_func() has been introduced by commit 7eea4fce02
("tracing/stack_trace: Skip 4 instead of 3 when using ftrace_ops_list_func")
as a helper function, but its caller has been removed by commit 72ac426a5b
("tracing: Clean up stack tracing and fix fentry updates"). So it is not
called anymore.
Link: http://lkml.kernel.org/r/153260904427.12474.9952096317439329851.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Nothing uses unregister_trigger() outside of trace_events_trigger.c file,
thus it should be static. Not sure why this was ever converted, because
its counter part, register_trigger(), was always static.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Here we introduce a test module for introducing a long preempt or irq
disable delay in the kernel which the preemptoff or irqsoff tracers can
detect. This module is to be used only for test purposes and is default
disabled.
Following is the expected output (only briefly shown) that can be parsed
to verify that the tracers are working correctly. We will use this from
the kselftests in future patches.
For the preemptoff tracer:
echo preemptoff > /d/tracing/current_tracer
sleep 1
insmod ./preemptirq_delay_test.ko test_mode=preempt delay=500000
sleep 1
bash-4.3# cat /d/tracing/trace
preempt -1066 2...2 0us@: preemptirq_delay_run <-preemptirq_delay_run
preempt -1066 2...2 500002us : preemptirq_delay_run <-preemptirq_delay_run
preempt -1066 2...2 500004us : tracer_preempt_on <-preemptirq_delay_run
preempt -1066 2...2 500012us : <stack trace>
=> kthread
=> ret_from_fork
For the irqsoff tracer:
echo irqsoff > /d/tracing/current_tracer
sleep 1
insmod ./preemptirq_delay_test.ko test_mode=irq delay=500000
sleep 1
bash-4.3# cat /d/tracing/trace
irq dis -1069 1d..1 0us@: preemptirq_delay_run
irq dis -1069 1d..1 500001us : preemptirq_delay_run
irq dis -1069 1d..1 500002us : tracer_hardirqs_on <-preemptirq_delay_run
irq dis -1069 1d..1 500005us : <stack trace>
=> ret_from_fork
Link: http://lkml.kernel.org/r/20180712213611.GA8743@joelaf.mtv.corp.google.com
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Julia Cartwright <julia@ni.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Glexiner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ Erick is a co-developer of this commit ]
Signed-off-by: Erick Reyes <erickreyes@google.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Split reset functions into seperate functions in preparation
of future patches that need to do tracer specific reset.
Link: http://lkml.kernel.org/r/20180628182149.226164-4-joel@joelfernandes.org
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There is a window for racing when printing directly to task->comm,
allowing other threads to see a non-terminated string. The vsnprintf
function fills the buffer, counts the truncated chars, then finally
writes the \0 at the end.
creator other
vsnprintf:
fill (not terminated)
count the rest trace_sched_waking(p):
... memcpy(comm, p->comm, TASK_COMM_LEN)
write \0
The consequences depend on how 'other' uses the string. In our case,
it was copied into the tracing system's saved cmdlines, a buffer of
adjacent TASK_COMM_LEN-byte buffers (note the 'n' where 0 should be):
crash-arm64> x/1024s savedcmd->saved_cmdlines | grep 'evenk'
0xffffffd5b3818640: "irq/497-pwr_evenkworker/u16:12"
...and a strcpy out of there would cause stack corruption:
[224761.522292] Kernel panic - not syncing: stack-protector:
Kernel stack is corrupted in: ffffff9bf9783c78
crash-arm64> kbt | grep 'comm\|trace_print_context'
#6 0xffffff9bf9783c78 in trace_print_context+0x18c(+396)
comm (char [16]) = "irq/497-pwr_even"
crash-arm64> rd 0xffffffd4d0e17d14 8
ffffffd4d0e17d14: 2f71726900000000 5f7277702d373934 ....irq/497-pwr_
ffffffd4d0e17d24: 726f776b6e657665 3a3631752f72656b evenkworker/u16:
ffffffd4d0e17d34: f9780248ff003231 cede60e0ffffff9b 12..H.x......`..
ffffffd4d0e17d44: cede60c8ffffffd4 00000fffffffffd4 .....`..........
The workaround in e09e28671 (use strlcpy in __trace_find_cmdline) was
likely needed because of this same bug.
Solved by vsnprintf:ing to a local buffer, then using set_task_comm().
This way, there won't be a window where comm is not terminated.
Link: http://lkml.kernel.org/r/20180726071539.188015-1-snild@sony.com
Cc: stable@vger.kernel.org
Fixes: bc0c38d139 ("ftrace: latency tracer infrastructure")
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Snild Dolkow <snild@sony.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There are use cases where it can be useful to have a cpus_read_trylock()
function to work around circular lock dependency problem involving
the cpu_hotplug_lock.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 57ea2a34ad ("tracing/kprobes: Fix trace_probe flags on
enable_trace_kprobe() failure") added an if statement that depends on another
if statement that gcc doesn't see will initialize the "link" variable and
gives the warning:
"warning: 'link' may be used uninitialized in this function"
It is really a false positive, but to quiet the warning, and also to make
sure that it never actually is used uninitialized, initialize the "link"
variable to NULL and add an if (!WARN_ON_ONCE(!link)) where the compiler
thinks it could be used uninitialized.
Cc: stable@vger.kernel.org
Fixes: 57ea2a34ad ("tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There was a case that triggered a double free in event_trigger_callback()
due to the called reg() function freeing the trigger_data and then it
getting freed again by the error return by the caller. The solution there
was to up the trigger_data ref count.
Code inspection found that event_enable_trigger_func() has the same issue,
but is not as easy to trigger (requires harder to trigger failures). It
needs to be solved slightly different as it needs more to clean up when the
reg() function fails.
Link: http://lkml.kernel.org/r/20180725124008.7008e586@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: 7862ad1846 ("tracing: Add 'enable_event' and 'disable_event' event trigger commands")
Reivewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If enable_trace_kprobe fails to enable the probe in enable_k(ret)probe
it returns an error, but does not unset the tp flags it set previously.
This results in a probe being considered enabled and failures like being
unable to remove the probe through kprobe_events file since probes_open()
expects every probe to be disabled.
Link: http://lkml.kernel.org/r/20180725102826.8300-1-asavkov@redhat.com
Link: http://lkml.kernel.org/r/20180725142038.4765-1-asavkov@redhat.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 41a7dd420c ("tracing/kprobes: Support ftrace_event_file base multibuffer")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Maintain the tracing on/off setting of the ring_buffer when switching
to the trace buffer snapshot.
Taking a snapshot is done by swapping the backup ring buffer
(max_tr_buffer). But since the tracing on/off setting is defined
by the ring buffer, when swapping it, the tracing on/off setting
can also be changed. This causes a strange result like below:
/sys/kernel/debug/tracing # cat tracing_on
1
/sys/kernel/debug/tracing # echo 0 > tracing_on
/sys/kernel/debug/tracing # cat tracing_on
0
/sys/kernel/debug/tracing # echo 1 > snapshot
/sys/kernel/debug/tracing # cat tracing_on
1
/sys/kernel/debug/tracing # echo 1 > snapshot
/sys/kernel/debug/tracing # cat tracing_on
0
We don't touch tracing_on, but snapshot changes tracing_on
setting each time. This is an anomaly, because user doesn't know
that each "ring_buffer" stores its own tracing-enable state and
the snapshot is done by swapping ring buffers.
Link: http://lkml.kernel.org/r/153149929558.11274.11730609978254724394.stgit@devbox
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Hiraku Toyooka <hiraku.toyooka@cybertrust.co.jp>
Cc: stable@vger.kernel.org
Fixes: debdd57f51 ("tracing: Make a snapshot feature available from userspace")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
[ Updated commit log and comment in the code ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Running the following:
# cd /sys/kernel/debug/tracing
# echo 500000 > buffer_size_kb
[ Or some other number that takes up most of memory ]
# echo snapshot > events/sched/sched_switch/trigger
Triggers the following bug:
------------[ cut here ]------------
kernel BUG at mm/slub.c:296!
invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
CPU: 6 PID: 6878 Comm: bash Not tainted 4.18.0-rc6-test+ #1066
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016
RIP: 0010:kfree+0x16c/0x180
Code: 05 41 0f b6 72 51 5b 5d 41 5c 4c 89 d7 e9 ac b3 f8 ff 48 89 d9 48 89 da 41 b8 01 00 00 00 5b 5d 41 5c 4c 89 d6 e9 f4 f3 ff ff <0f> 0b 0f 0b 48 8b 3d d9 d8 f9 00 e9 c1 fe ff ff 0f 1f 40 00 0f 1f
RSP: 0018:ffffb654436d3d88 EFLAGS: 00010246
RAX: ffff91a9d50f3d80 RBX: ffff91a9d50f3d80 RCX: ffff91a9d50f3d80
RDX: 00000000000006a4 RSI: ffff91a9de5a60e0 RDI: ffff91a9d9803500
RBP: ffffffff8d267c80 R08: 00000000000260e0 R09: ffffffff8c1a56be
R10: fffff0d404543cc0 R11: 0000000000000389 R12: ffffffff8c1a56be
R13: ffff91a9d9930e18 R14: ffff91a98c0c2890 R15: ffffffff8d267d00
FS: 00007f363ea64700(0000) GS:ffff91a9de580000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055c1cacc8e10 CR3: 00000000d9b46003 CR4: 00000000001606e0
Call Trace:
event_trigger_callback+0xee/0x1d0
event_trigger_write+0xfc/0x1a0
__vfs_write+0x33/0x190
? handle_mm_fault+0x115/0x230
? _cond_resched+0x16/0x40
vfs_write+0xb0/0x190
ksys_write+0x52/0xc0
do_syscall_64+0x5a/0x160
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f363e16ab50
Code: 73 01 c3 48 8b 0d 38 83 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 79 db 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 1e e3 01 00 48 89 04 24
RSP: 002b:00007fff9a4c6378 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007f363e16ab50
RDX: 0000000000000009 RSI: 000055c1cacc8e10 RDI: 0000000000000001
RBP: 000055c1cacc8e10 R08: 00007f363e435740 R09: 00007f363ea64700
R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000009
R13: 0000000000000001 R14: 00007f363e4345e0 R15: 00007f363e4303c0
Modules linked in: ip6table_filter ip6_tables snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device i915 snd_pcm snd_timer i2c_i801 snd soundcore i2c_algo_bit drm_kms_helper
86_pkg_temp_thermal video kvm_intel kvm irqbypass wmi e1000e
---[ end trace d301afa879ddfa25 ]---
The cause is because the register_snapshot_trigger() call failed to
allocate the snapshot buffer, and then called unregister_trigger()
which freed the data that was passed to it. Then on return to the
function that called register_snapshot_trigger(), as it sees it
failed to register, it frees the trigger_data again and causes
a double free.
By calling event_trigger_init() on the trigger_data (which only ups
the reference counter for it), and then event_trigger_free() afterward,
the trigger_data would not get freed by the registering trigger function
as it would only up and lower the ref count for it. If the register
trigger function fails, then the event_trigger_free() called after it
will free the trigger data normally.
Link: http://lkml.kernel.org/r/20180724191331.738eb819@gandalf.local.home
Cc: stable@vger.kerne.org
Fixes: 93e31ffbf4 ("tracing: Add 'snapshot' event trigger command")
Reported-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This removes needless use of '%p', and refactors the printk calls to
use pr_*() helpers instead.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In function perf_event_parse_addr_filter(), the path::dentry of each struct
perf_addr_filter is left unassigned (as it should be) when the pattern
being parsed is related to kernel space. But in function
perf_addr_filter_match() the same dentries are given to d_inode() where
the value is not expected to be NULL, resulting in the following splat:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058
pc : perf_event_mmap+0x2fc/0x5a0
lr : perf_event_mmap+0x2c8/0x5a0
Process uname (pid: 2860, stack limit = 0x000000001cbcca37)
Call trace:
perf_event_mmap+0x2fc/0x5a0
mmap_region+0x124/0x570
do_mmap+0x344/0x4f8
vm_mmap_pgoff+0xe4/0x110
vm_mmap+0x2c/0x40
elf_map+0x60/0x108
load_elf_binary+0x450/0x12c4
search_binary_handler+0x90/0x290
__do_execve_file.isra.13+0x6e4/0x858
sys_execve+0x3c/0x50
el0_svc_naked+0x30/0x34
This patch is fixing the problem by introducing a new check in function
perf_addr_filter_match() to see if the filter's dentry is NULL.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: miklos@szeredi.hu
Cc: namhyung@kernel.org
Cc: songliubraving@fb.com
Fixes: 9511bce9fe ("perf/core: Fix bad use of igrab()")
Link: http://lkml.kernel.org/r/1531782831-1186-1-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Vince reported the perf_fuzzer giving various unwinder warnings and
Josh reported:
> Deja vu. Most of these are related to perf PEBS, similar to the
> following issue:
>
> b8000586c9 ("perf/x86/intel: Cure bogus unwind from PEBS entries")
>
> This is basically the ORC version of that. setup_pebs_sample_data() is
> assembling a franken-pt_regs which ORC isn't happy about. RIP is
> inconsistent with some of the other registers (like RSP and RBP).
And where the previous unwinder only needed BP,SP ORC also requires
IP. But we cannot spoof IP because then the sample will get displaced,
entirely negating the point of PEBS.
So cure the whole thing differently by doing the unwind early; this
does however require a means to communicate we did the unwind early.
We (ab)use an unused sample_type bit for this, which we set on events
that fill out the data->callchain before the normal
perf_prepare_sample().
Debugged-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The metrics for updating scan periods are local or task specific.
Currently this update happens under the numa_group lock, which seems
unnecessary. Hence move this update outside the lock.
Running SPECjbb2005 on a 4 node machine and comparing bops/JVM
JVMS LAST_PATCH WITH_PATCH %CHANGE
16 25355.9 25645.4 1.141
1 72812 72142 -0.92
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1529514181-9842-15-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
task_numa_find_cpu() helps to find the CPU to swap/move the task to.
It's guarded by numa_has_capacity(). However node not having capacity
shouldn't deter a task swapping if it helps NUMA placement.
Further load_too_imbalanced(), which evaluates possibilities of move/swap,
provides similar checks as numa_has_capacity.
Hence remove numa_has_capacity() to enhance possibilities of task
swapping even if load is imbalanced.
Running SPECjbb2005 on a 4 node machine and comparing bops/JVM
JVMS LAST_PATCH WITH_PATCH %CHANGE
16 25657.9 25804.1 0.569
1 74435 73413 -1.37
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rik van Riel <riel@surriel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1529514181-9842-13-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are checks in migrate_swap_stop() that check if the task/CPU
combination is as per migrate_swap_arg before migrating.
However atleast one of the two tasks to be swapped by migrate_swap() could
have migrated to a completely different CPU before updating the
migrate_swap_arg. The new CPU where the task is currently running could
be a different node too. If the task has migrated, numa balancer might
end up placing a task in a wrong node. Instead of achieving node
consolidation, it may end up spreading the load across nodes.
To avoid that pass the CPUs as additional parameters.
While here, place migrate_swap under CONFIG_NUMA_BALANCING.
Running SPECjbb2005 on a 4 node machine and comparing bops/JVM
JVMS LAST_PATCH WITH_PATCH %CHANGE
16 25377.3 25226.6 -0.59
1 72287 73326 1.437
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1529514181-9842-10-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The task_capacity field in 'struct numa_stats' is redundant.
Also move nr_running for better packing within the struct.
No functional changes.
Running SPECjbb2005 on a 4 node machine and comparing bops/JVM
JVMS LAST_PATCH WITH_PATCH %CHANGE
16 25308.6 25377.3 0.271
1 72964 72287 -0.92
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Rik van Riel <riel@surriel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1529514181-9842-9-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix the order in which the private and shared numa faults are getting
printed.
No functional changes.
Running SPECjbb2005 on a 4 node machine and comparing bops/JVM
JVMS LAST_PATCH WITH_PATCH %CHANGE
16 25215.7 25375.3 0.63
1 72107 72617 0.70
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1529514181-9842-7-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently preferred node is set to dst_nid which is the last node in the
iteration whose group weight or task weight is greater than the current
node. However it doesn't guarantee that dst_nid has the numa capacity
to move. It also doesn't guarantee that dst_nid has the best_cpu which
is the CPU/node ideal for node migration.
Lets consider faults on a 4 node system with group weight numbers
in different nodes being in 0 < 1 < 2 < 3 proportion. Consider the task
is running on 3 and 0 is its preferred node but its capacity is full.
Consider nodes 1, 2 and 3 have capacity. Then the task should be
migrated to node 1. Currently the task gets moved to node 2. env.dst_nid
points to the last node whose faults were greater than current node.
Modify to set the preferred node based of best_cpu. Earlier setting
preferred node was skipped if nr_active_nodes is 1. This could result in
the task being moved out of the preferred node to a random node during
regular load balancing.
Also while modifying task_numa_migrate(), use sched_setnuma to set
preferred node. This ensures out numa accounting is correct.
Running SPECjbb2005 on a 4 node machine and comparing bops/JVM
JVMS LAST_PATCH WITH_PATCH %CHANGE
16 25122.9 25549.6 1.698
1 73850 73190 -0.89
Running SPECjbb2005 on a 16 node machine and comparing bops/JVM
JVMS LAST_PATCH WITH_PATCH %CHANGE
8 105930 113437 7.08676
1 178624 196130 9.80047
(numbers from v1 based on v4.17-rc5)
Testcase Time: Min Max Avg StdDev
numa01.sh Real: 435.78 653.81 534.58 83.20
numa01.sh Sys: 121.93 187.18 145.90 23.47
numa01.sh User: 37082.81 51402.80 43647.60 5409.75
numa02.sh Real: 60.64 61.63 61.19 0.40
numa02.sh Sys: 14.72 25.68 19.06 4.03
numa02.sh User: 5210.95 5266.69 5233.30 20.82
numa03.sh Real: 746.51 808.24 780.36 23.88
numa03.sh Sys: 97.26 108.48 105.07 4.28
numa03.sh User: 58956.30 61397.05 60162.95 1050.82
numa04.sh Real: 465.97 519.27 484.81 19.62
numa04.sh Sys: 304.43 359.08 334.68 20.64
numa04.sh User: 37544.16 41186.15 39262.44 1314.91
numa05.sh Real: 411.57 457.20 433.29 16.58
numa05.sh Sys: 230.05 435.48 339.95 67.58
numa05.sh User: 33325.54 36896.31 35637.84 1222.64
Testcase Time: Min Max Avg StdDev %Change
numa01.sh Real: 506.35 794.46 599.06 104.26 -10.76%
numa01.sh Sys: 150.37 223.56 195.99 24.94 -25.55%
numa01.sh User: 43450.69 61752.04 49281.50 6635.33 -11.43%
numa02.sh Real: 60.33 62.40 61.31 0.90 -0.195%
numa02.sh Sys: 18.12 31.66 24.28 5.89 -21.49%
numa02.sh User: 5203.91 5325.32 5260.29 49.98 -0.513%
numa03.sh Real: 696.47 853.62 745.80 57.28 4.6339%
numa03.sh Sys: 85.68 123.71 97.89 13.48 7.3347%
numa03.sh User: 55978.45 66418.63 59254.94 3737.97 1.5323%
numa04.sh Real: 444.05 514.83 497.06 26.85 -2.464%
numa04.sh Sys: 230.39 375.79 316.23 48.58 5.8343%
numa04.sh User: 35403.12 41004.10 39720.80 2163.08 -1.153%
numa05.sh Real: 423.09 460.41 439.57 13.92 -1.428%
numa05.sh Sys: 287.38 480.15 369.37 68.52 -7.964%
numa05.sh User: 34732.12 38016.80 36255.85 1070.51 -1.704%
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1529514181-9842-5-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently load_too_imbalance() cares about the slope of imbalance.
It doesn't care of the direction of the imbalance.
However this may not work if nodes that are being compared have
dissimilar capacities. Few nodes might have more cores than other nodes
in the system. Also unlike traditional load balance at a NUMA sched
domain, multiple requests to migrate from the same source node to same
destination node may run in parallel. This can cause huge load
imbalance. This is specially true on a larger machines with either large
cores per node or more number of nodes in the system. Hence allow
move/swap only if the imbalance is going to reduce.
Running SPECjbb2005 on a 4 node machine and comparing bops/JVM
JVMS LAST_PATCH WITH_PATCH %CHANGE
16 25058.2 25122.9 0.25
1 72950 73850 1.23
(numbers from v1 based on v4.17-rc5)
Testcase Time: Min Max Avg StdDev
numa01.sh Real: 516.14 892.41 739.84 151.32
numa01.sh Sys: 153.16 192.99 177.70 14.58
numa01.sh User: 39821.04 69528.92 57193.87 10989.48
numa02.sh Real: 60.91 62.35 61.58 0.63
numa02.sh Sys: 16.47 26.16 21.20 3.85
numa02.sh User: 5227.58 5309.61 5265.17 31.04
numa03.sh Real: 739.07 917.73 795.75 64.45
numa03.sh Sys: 94.46 136.08 109.48 14.58
numa03.sh User: 57478.56 72014.09 61764.48 5343.69
numa04.sh Real: 442.61 715.43 530.31 96.12
numa04.sh Sys: 224.90 348.63 285.61 48.83
numa04.sh User: 35836.84 47522.47 40235.41 3985.26
numa05.sh Real: 386.13 489.17 434.94 43.59
numa05.sh Sys: 144.29 438.56 278.80 105.78
numa05.sh User: 33255.86 36890.82 34879.31 1641.98
Testcase Time: Min Max Avg StdDev %Change
numa01.sh Real: 435.78 653.81 534.58 83.20 38.39%
numa01.sh Sys: 121.93 187.18 145.90 23.47 21.79%
numa01.sh User: 37082.81 51402.80 43647.60 5409.75 31.03%
numa02.sh Real: 60.64 61.63 61.19 0.40 0.637%
numa02.sh Sys: 14.72 25.68 19.06 4.03 11.22%
numa02.sh User: 5210.95 5266.69 5233.30 20.82 0.608%
numa03.sh Real: 746.51 808.24 780.36 23.88 1.972%
numa03.sh Sys: 97.26 108.48 105.07 4.28 4.197%
numa03.sh User: 58956.30 61397.05 60162.95 1050.82 2.661%
numa04.sh Real: 465.97 519.27 484.81 19.62 9.385%
numa04.sh Sys: 304.43 359.08 334.68 20.64 -14.6%
numa04.sh User: 37544.16 41186.15 39262.44 1314.91 2.478%
numa05.sh Real: 411.57 457.20 433.29 16.58 0.380%
numa05.sh Sys: 230.05 435.48 339.95 67.58 -17.9%
numa05.sh User: 33325.54 36896.31 35637.84 1222.64 -2.12%
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1529514181-9842-4-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Although we can rely on cpuacct to present the CPU usage of task
groups, it is hard to tell how intense the competition is between
these groups on CPU resources.
Monitoring the wait time or sched_debug of each process could be
very expensive, and there is no good way to accurately represent the
conflict with these info, we need the wait time on group dimension.
Thus we introduce group's wait_sum to represent the resource conflict
between task groups, which is simply the sum of the wait time of
the group's cfs_rq.
The 'cpu.stat' is modified to show the statistic, like:
nr_periods 0
nr_throttled 0
throttled_time 0
wait_sum 2035098795584
Now we can monitor the changes of wait_sum to tell how much a
a task group is suffering in the fight of CPU resources.
For example:
(wait_sum - last_wait_sum) * 100 / (nr_cpu * period_ns) == X%
means the task group paid X percentage of period on waiting
for the CPU.
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/ff7dae3b-e5f9-7157-1caa-ff02c6b23dc1@linux.alibaba.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reuse cpu_util_irq() that has been defined for schedutil and set irq util
to 0 when !CONFIG_IRQ_TIME_ACCOUNTING.
But the compiler is not able to optimize the sequence (at least with
aarch64 GCC 7.2.1):
free *= (max - irq);
free /= max;
when irq is fixed to 0
Add a new inline function scale_irq_capacity() that will scale utilization
when irq is accounted. Reuse this funciton in schedutil which applies
similar formula.
Suggested-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: rjw@rjwysocki.net
Link: http://lkml.kernel.org/r/1532001606-6689-1-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
NO_RT_RUNTIME_SHARE feature is used to prevent a CPU borrow enough
runtime with a spin-rt-task.
However, if RT_RUNTIME_SHARE feature is enabled and rt_rq has borrowd
enough rt_runtime at the beginning, rt_runtime can't be restored to
its initial bandwidth rt_runtime after we disable RT_RUNTIME_SHARE.
E.g. on my PC with 4 cores, procedure to reproduce:
1) Make sure RT_RUNTIME_SHARE is enabled
cat /sys/kernel/debug/sched_features
GENTLE_FAIR_SLEEPERS START_DEBIT NO_NEXT_BUDDY LAST_BUDDY
CACHE_HOT_BUDDY WAKEUP_PREEMPTION NO_HRTICK NO_DOUBLE_TICK
LB_BIAS NONTASK_CAPACITY TTWU_QUEUE NO_SIS_AVG_CPU SIS_PROP
NO_WARN_DOUBLE_CLOCK RT_PUSH_IPI RT_RUNTIME_SHARE NO_LB_MIN
ATTACH_AGE_LOAD WA_IDLE WA_WEIGHT WA_BIAS
2) Start a spin-rt-task
./loop_rr &
3) set affinity to the last cpu
taskset -p 8 $pid_of_loop_rr
4) Observe that last cpu have borrowed enough runtime.
cat /proc/sched_debug | grep rt_runtime
.rt_runtime : 950.000000
.rt_runtime : 900.000000
.rt_runtime : 950.000000
.rt_runtime : 1000.000000
5) Disable RT_RUNTIME_SHARE
echo NO_RT_RUNTIME_SHARE > /sys/kernel/debug/sched_features
6) Observe that rt_runtime can not been restored
cat /proc/sched_debug | grep rt_runtime
.rt_runtime : 950.000000
.rt_runtime : 900.000000
.rt_runtime : 950.000000
.rt_runtime : 1000.000000
This patch help to restore rt_runtime after we disable
RT_RUNTIME_SHARE.
Signed-off-by: Hailong Liu <liu.hailong6@zte.com.cn>
Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: zhong.weidong@zte.com.cn
Link: http://lkml.kernel.org/r/1531874815-39357-1-git-send-email-liu.hailong6@zte.com.cn
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This commit:
9fb8d5dc4b ("stop_machine, Disable preemption when waking two stopper threads")
does not fully address the race condition that can occur
as follows:
On one CPU, call it CPU 3, thread 1 invokes
cpu_stop_queue_two_works(2, 3,...), and the execution is such
that thread 1 queues the works for migration/2 and migration/3,
and is preempted after releasing the locks for migration/2 and
migration/3, but before waking the threads.
Then, On CPU 2, a kworker, call it thread 2, is running,
and it invokes cpu_stop_queue_two_works(1, 2,...), such that
thread 2 queues the works for migration/1 and migration/2.
Meanwhile, on CPU 3, thread 1 resumes execution, and wakes
migration/2 and migration/3. This means that when CPU 2
releases the locks for migration/1 and migration/2, but before
it wakes those threads, it can be preempted by migration/2.
If thread 2 is preempted by migration/2, then migration/2 will
execute the first work item successfully, since migration/3
was woken up by CPU 3, but when it goes to execute the second
work item, it disables preemption, calls multi_cpu_stop(),
and thus, CPU 2 will wait forever for migration/1, which should
have been woken up by thread 2. However migration/1 cannot be
woken up by thread 2, since it is a kworker, so it is affine to
CPU 2, but CPU 2 is running migration/2 with preemption
disabled, so thread 2 will never run.
Disable preemption after queueing works for stopper threads
to ensure that the operation of queueing the works and waking
the stopper threads is atomic.
Co-Developed-by: Prasad Sodagudi <psodagud@codeaurora.org>
Co-Developed-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bigeasy@linutronix.de
Cc: gregkh@linuxfoundation.org
Cc: matt@codeblueprint.co.uk
Fixes: 9fb8d5dc4b ("stop_machine, Disable preemption when waking two stopper threads")
Link: http://lkml.kernel.org/r/1531856129-9871-1-git-send-email-isaacm@codeaurora.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The 'group' variable in sched_domain_debug_one() is not checked
when firstly used in cpumask_test_cpu(cpu, sched_group_span(group)),
but it might be NULL (it is checked later in the following while loop)
and may cause NULL pointer dereference.
We need to check it before using to avoid NULL dereference.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: zhong.weidong@zte.com.cn
Link: http://lkml.kernel.org/r/1532319547-33335-1-git-send-email-wang.yi59@zte.com.cn
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull networking fixes from David Miller:
1) Handle stations tied to AP_VLANs properly during mac80211 hw
reconfig. From Manikanta Pubbisetty.
2) Fix jump stack depth validation in nf_tables, from Taehee Yoo.
3) Fix quota handling in aRFS flow expiration of mlx5 driver, from Eran
Ben Elisha.
4) Exit path handling fix in powerpc64 BPF JIT, from Daniel Borkmann.
5) Use ptr_ring_consume_bh() in page pool code, from Tariq Toukan.
6) Fix cached netdev name leak in nf_tables, from Florian Westphal.
7) Fix memory leaks on chain rename, also from Florian Westphal.
8) Several fixes to DCTCP congestion control ACK handling, from Yuchunk
Cheng.
9) Missing rcu_read_unlock() in CAIF protocol code, from Yue Haibing.
10) Fix link local address handling with VRF, from David Ahern.
11) Don't clobber 'err' on a successful call to __skb_linearize() in
skb_segment(). From Eric Dumazet.
12) Fix vxlan fdb notification races, from Roopa Prabhu.
13) Hash UDP fragments consistently, from Paolo Abeni.
14) If TCP receives lots of out of order tiny packets, we do really
silly stuff. Make the out-of-order queue ending more robust to this
kind of behavior, from Eric Dumazet.
15) Don't leak netlink dump state in nf_tables, from Florian Westphal.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
net: axienet: Fix double deregister of mdio
qmi_wwan: fix interface number for DW5821e production firmware
ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull
bnx2x: Fix invalid memory access in rss hash config path.
net/mlx4_core: Save the qpn from the input modifier in RST2INIT wrapper
r8169: restore previous behavior to accept BIOS WoL settings
cfg80211: never ignore user regulatory hint
sock: fix sg page frag coalescing in sk_alloc_sg
netfilter: nf_tables: move dumper state allocation into ->start
tcp: add tcp_ooo_try_coalesce() helper
tcp: call tcp_drop() from tcp_data_queue_ofo()
tcp: detect malicious patterns in tcp_collapse_ofo_queue()
tcp: avoid collapses in tcp_prune_queue() if possible
tcp: free batches of packets in tcp_prune_ofo_queue()
ip: hash fragments consistently
ipv6: use fib6_info_hold_safe() when necessary
can: xilinx_can: fix power management handling
can: xilinx_can: fix incorrect clear of non-processed interrupts
can: xilinx_can: fix RX overflow interrupt not being enabled
can: xilinx_can: keep only 1-2 frames in TX FIFO to fix TX accounting
...
If SMT is disabled in BIOS, the CPU code doesn't properly detect it.
The /sys/devices/system/cpu/smt/control file shows 'on', and the 'l1tf'
vulnerabilities file shows SMT as vulnerable.
Fix it by forcing 'cpu_smt_control' to CPU_SMT_NOT_SUPPORTED in such a
case. Unfortunately the detection can only be done after bringing all
the CPUs online, so we have to overwrite any previous writes to the
variable.
Reported-by: Joe Mario <jmario@redhat.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Fixes: f048c399e0 ("x86/topology: Provide topology_smt_supported()")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
This patch ensures the member->offset of a struct
is in the correct order (i.e the later member's offset cannot
go backward).
The current "pahole -J" BTF encoder does not generate something
like this. However, checking this can ensure future encoder
will not violate this.
Fixes: 69b693f0ae ("bpf: btf: Introduce BPF Type Format (BTF)")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
MEMORY_DEVICE_FS_DAX relies on typical page semantics whereby ->mapping
is only ever cleared by truncation, not final put.
Without this fix dax pages may forget their mapping association at the
end of every page pin event.
Move this atypical behavior that HMM wants into the HMM ->page_free()
callback.
Cc: <stable@vger.kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Fixes: d2c997c0f1 ("fs, dax: use page->mapping...")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In practice this does not change anything as testing for fatal_signal_pending
and exiting for with an error code duplicates the work of the next clause
which recalculates pending signals and then exits fork if any are pending.
In both cases the pending signal will trigger the slow path when existing
to userspace, and the fatal signal will cause do_exit to be called.
The advantage of making this a separate test is that it makes it clear
processing the fatal signal will terminate the fork, and it allows the
rest of the signal logic to be updated without fear that this important
case will be lost.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Normally this would be something that would be handled by handling
signals that are sent to a group of processes but in this case the
forking process is not a member of the group being signaled. Thus
special code is needed to prevent a race with pid namespaces exiting,
and fork adding new processes within them.
Move this test up before the signal restart just in case signals are
also pending. Fatal conditions should take presedence over restarts.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
livepatch module author can pass module name/old function name with more
than the defined character limit. With obj->name length greater than
MODULE_NAME_LEN, the livepatch module gets loaded but waits forever on
the module specified by obj->name to be loaded. It also populates a /sys
directory with an untruncated object name.
In the case of funcs->old_name length greater then KSYM_NAME_LEN, it
would not match against any of the symbol table entries. Instead loop
through the symbol table comparing them against a nonexisting function,
which can be avoided.
The same issues apply, to misspelled/incorrect names. At least gatekeep
the modules with over the limit string length, by checking for their
length during livepatch module registration.
Cc: stable@vger.kernel.org
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull scheduler fixes from Ingo Molnar:
"Two fixes: a stop-machine preemption fix and a SCHED_DEADLINE fix"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Fix switched_from_dl() warning
stop_machine: Disable preemption when waking two stopper threads
Like vm_area_dup(), it initializes the anon_vma_chain head, and the
basic mm pointer.
The rest of the fields end up being different for different users,
although the plan is to also initialize the 'vm_ops' field to a dummy
entry.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
.. and re-initialize th eanon_vma_chain head.
This removes some boiler-plate from the users, and also makes it clear
why it didn't need use the 'zalloc()' version.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The vm_area_struct is one of the most fundamental memory management
objects, but the management of it is entirely open-coded evertwhere,
ranging from allocation and freeing (using kmem_cache_[z]alloc and
kmem_cache_free) to initializing all the fields.
We want to unify this in order to end up having some unified
initialization of the vmas, and the first step to this is to at least
have basic allocation functions.
Right now those functions are literally just wrappers around the
kmem_cache_*() calls. This is a purely mechanical conversion:
# new vma:
kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL) -> vm_area_alloc()
# copy old vma
kmem_cache_alloc(vm_area_cachep, GFP_KERNEL) -> vm_area_dup(old)
# free vma
kmem_cache_free(vm_area_cachep, vma) -> vm_area_free(vma)
to the point where the old vma passed in to the vm_area_dup() function
isn't even used yet (because I've left all the old manual initialization
alone).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the bottom and by pushing this down it simplifies the callers
and otherwise leaves things as is. This is in preparation for allowing
fork to implement better handling of signals set to groups of processes.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
This information is already available in the callers and by pushing it
down it makes the code a little clearer, and allows implementing
better handling of signales set to a group of processes in fork.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
This information is already available in the callers and by pushing it
down it makes the code a little clearer, and allows better group
signal behavior in fork.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
This passes the information we already have at the call sight into
do_send_sig_info. Ultimately allowing for better handling of signals
sent to a group of processes during fork.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
This passes the information we already have at the call sight
into group_send_sig_info. Ultimatelly allowing for to better handle
signals sent to a group of processes.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Make the code more maintainable by performing more of the signal
related work in send_sigqueue.
A quick inspection of do_timer_create will show that this code path
does not lookup a thread group by a thread's pid. Making it safe
to find the task pointed to by it_pid with "pid_task(it_pid, type)";
This supports the changes needed in fork to tell if a signal was sent
to a single process or a group of processes.
Having the pid to task transition in signal.c will also make it easier
to sort out races with de_thread and and the thread group leader
exiting when it comes time to address that.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
In good_sigevent directly compute the default return value as
"task_tgid(current)". This is exactly the same as
"task_pid(current->group_leader)" but written more clearly.
In the thread case first compute the thread's pid. Then veify that
attached to that pid is a thread of the current thread group.
This has the net effect of making the code a little clearer, and
making it obvious that posix timers never look up a process by a the
pid of a thread.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Everywhere except in the pid array we distinguish between a tasks pid and
a tasks tgid (thread group id). Even in the enumeration we want that
distinction sometimes so we have added __PIDTYPE_TGID. With leader_pid
we almost have an implementation of PIDTYPE_TGID in struct signal_struct.
Add PIDTYPE_TGID as a first class member of the pid_type enumeration and
into the pids array. Then remove the __PIDTYPE_TGID special case and the
leader_pid in signal_struct.
The net size increase is just an extra pointer added to struct pid and
an extra pair of pointers of an hlist_node added to task_struct.
The effect on code maintenance is the removal of a number of special
cases today and the potential to remove many more special cases as
PIDTYPE_TGID gets used to it's fullest. The long term potential
is allowing zombie thread group leaders to exit, which will remove
a lot more special cases in the code.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
To access these fields the code always has to go to group leader so
going to signal struct is no loss and is actually a fundamental simplification.
This saves a little bit of memory by only allocating the pid pointer array
once instead of once for every thread, and even better this removes a
few potential races caused by the fact that group_leader can be changed
by de_thread, while signal_struct can not.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The cost is the the same and this removes the need
to worry about complications that come from de_thread
and group_leader changing.
__task_pid_nr_ns has been updated to take advantage of this change.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-07-20
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add sharing of BPF objects within one ASIC: this allows for reuse of
the same program on multiple ports of a device, and therefore gains
better code store utilization. On top of that, this now also enables
sharing of maps between programs attached to different ports of a
device, from Jakub.
2) Cleanup in libbpf and bpftool's Makefile to reduce unneeded feature
detections and unused variable exports, also from Jakub.
3) First batch of RCU annotation fixes in prog array handling, i.e.
there are several __rcu markers which are not correct as well as
some of the RCU handling, from Roman.
4) Two fixes in BPF sample files related to checking of the prog_cnt
upper limit from sample loader, from Dan.
5) Minor cleanup in sockmap to remove a set but not used variable,
from Colin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This change allows creating kernfs files and directories with arbitrary
uid/gid instead of always using GLOBAL_ROOT_UID/GID by extending
kernfs_create_dir_ns() and kernfs_create_file_ns() with uid/gid arguments.
The "simple" kernfs_create_file() and kernfs_create_dir() are left alone
and always create objects belonging to the global root.
When creating symlinks ownership (uid/gid) is taken from the target kernfs
object.
Co-Developed-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch shrinks the BTF_INT_BITS() mask. The current
btf_int_check_meta() ensures the nr_bits of an integer
cannot exceed 64. Hence, it is mostly an uapi cleanup.
The actual btf usage (i.e. seq_show()) is also modified
to use u8 instead of u16. The verification (e.g. btf_int_check_meta())
path stays as is to deal with invalid BTF situation.
Fixes: 69b693f0ae ("bpf: btf: Introduce BPF Type Format (BTF)")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull the second set of timekeeping things for 4.19 from John Stultz
* NTP argument clenaups and constification from Ondrej Mosnacek
* Fix to avoid RTC injecting sleeptime when suspend fails from
Mukesh Ojha
* Broading suspsend-timing to include non-stop clocksources that
aren't currently used for timekeeping from Baolin Wang
On some hardware with multiple clocksources, we have coarse grained
clocksources that support the CLOCK_SOURCE_SUSPEND_NONSTOP flag, but
which are less than ideal for timekeeping whereas other clocksources
can be better candidates but halt on suspend.
Currently, the timekeeping core only supports timing suspend using
CLOCK_SOURCE_SUSPEND_NONSTOP clocksources if that clocksource is the
current clocksource for timekeeping.
As a result, some architectures try to implement read_persistent_clock64()
using those non-stop clocksources, but isn't really ideal, which will
introduce more duplicate code. To fix this, provide logic to allow a
registered SUSPEND_NONSTOP clocksource, which isn't the current
clocksource, to be used to calculate the suspend time.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
[jstultz: minor tweaks to merge with previous resume changes]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Currently, there exists a corner case assuming when there is
only one clocksource e.g RTC, and system failed to go to
suspend mode. While resume rtc_resume() injects the sleeptime
as timekeeping_rtc_skipresume() returned 'false' (default value
of sleeptime_injected) due to which we can see mismatch in
timestamps.
This issue can also come in a system where more than one
clocksource are present and very first suspend fails.
Success case:
------------
{sleeptime_injected=false}
rtc_suspend() => timekeeping_suspend() => timekeeping_resume() =>
(sleeptime injected)
rtc_resume()
Failure case:
------------
{failure in sleep path} {sleeptime_injected=false}
rtc_suspend() => rtc_resume()
{sleeptime injected again which was not required as the suspend failed}
Fix this by handling the boolean logic properly.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Originally-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Add 'const' to some function arguments and variables to make it easier
to read the code.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
[jstultz: Also fixup pre-existing checkpatch warnings for
prototype arguments with no variable name]
Signed-off-by: John Stultz <john.stultz@linaro.org>
...instead of kstrtol with a dirty cast.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
The 'ts' argument of process_adj_status() and process_adjtimex_modes()
is unused and can be safely removed.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Pull networking fixes from David Miller:
"Lots of fixes, here goes:
1) NULL deref in qtnfmac, from Gustavo A. R. Silva.
2) Kernel oops when fw download fails in rtlwifi, from Ping-Ke Shih.
3) Lost completion messages in AF_XDP, from Magnus Karlsson.
4) Correct bogus self-assignment in rhashtable, from Rishabh
Bhatnagar.
5) Fix regression in ipv6 route append handling, from David Ahern.
6) Fix masking in __set_phy_supported(), from Heiner Kallweit.
7) Missing module owner set in x_tables icmp, from Florian Westphal.
8) liquidio's timeouts are HZ dependent, fix from Nicholas Mc Guire.
9) Link setting fixes for sh_eth and ravb, from Vladimir Zapolskiy.
10) Fix NULL deref when using chains in act_csum, from Davide Caratti.
11) XDP_REDIRECT needs to check if the interface is up and whether the
MTU is sufficient. From Toshiaki Makita.
12) Net diag can do a double free when killing TCP_NEW_SYN_RECV
connections, from Lorenzo Colitti.
13) nf_defrag in ipv6 can unnecessarily hold onto dst entries for a
full minute, delaying device unregister. From Eric Dumazet.
14) Update MAC entries in the correct order in ixgbe, from Alexander
Duyck.
15) Don't leave partial mangles bpf program in jit_subprogs, from
Daniel Borkmann.
16) Fix pfmemalloc SKB state propagation, from Stefano Brivio.
17) Fix ACK handling in DCTCP congestion control, from Yuchung Cheng.
18) Use after free in tun XDP_TX, from Toshiaki Makita.
19) Stale ipv6 header pointer in ipv6 gre code, from Prashant Bhole.
20) Don't reuse remainder of RX page when XDP is set in mlx4, from
Saeed Mahameed.
21) Fix window probe handling of TCP rapair sockets, from Stefan
Baranoff.
22) Missing socket locking in smc_ioctl(), from Ursula Braun.
23) IPV6_ILA needs DST_CACHE, from Arnd Bergmann.
24) Spectre v1 fix in cxgb3, from Gustavo A. R. Silva.
25) Two spots in ipv6 do a rol32() on a hash value but ignore the
result. Fixes from Colin Ian King"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (176 commits)
tcp: identify cryptic messages as TCP seq # bugs
ptp: fix missing break in switch
hv_netvsc: Fix napi reschedule while receive completion is busy
MAINTAINERS: Drop inactive Vitaly Bordug's email
net: cavium: Add fine-granular dependencies on PCI
net: qca_spi: Fix log level if probe fails
net: qca_spi: Make sure the QCA7000 reset is triggered
net: qca_spi: Avoid packet drop during initial sync
ipv6: fix useless rol32 call on hash
ipv6: sr: fix useless rol32 call on hash
net: sched: Using NULL instead of plain integer
net: usb: asix: replace mii_nway_restart in resume path
net: cxgb3_main: fix potential Spectre v1
lib/rhashtable: consider param->min_size when setting initial table size
net/smc: reset recv timeout after clc handshake
net/smc: add error handling for get_user()
net/smc: optimize consumer cursor updates
net/nfc: Avoid stalls when nfc_alloc_send_skb() returned NULL.
ipv6: ila: select CONFIG_DST_CACHE
net: usb: rtl8150: demote allmulti message to dev_dbg()
...
audit_add_watch stores locally krule->watch without taking a reference
on watch. Then, it calls audit_add_to_parent, and uses the watch stored
locally.
Unfortunately, it is possible that audit_add_to_parent updates
krule->watch.
When it happens, it also drops a reference of watch which
could free the watch.
How to reproduce (with KASAN enabled):
auditctl -w /etc/passwd -F success=0 -k test_passwd
auditctl -w /etc/passwd -F success=1 -k test_passwd2
The second call to auditctl triggers the use-after-free, because
audit_to_parent updates krule->watch to use a previous existing watch
and drops the reference to the newly created watch.
To fix the issue, we grab a reference of watch and we release it at the
end of the function.
Signed-off-by: Ronny Chevalier <ronny.chevalier@hp.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Allow programs and maps to be re-used across different netdevs,
as long as they belong to the same struct bpf_offload_dev.
Update the bpf_offload_prog_map_match() helper for the verifier
and export a new helper for the drivers to use when checking
programs at attachment time.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Create a higher-level entity to represent a device/ASIC to allow
programs and maps to be shared between device ports. The extra
work is required to make sure we don't destroy BPF objects as
soon as the netdev for which they were loaded gets destroyed,
as other ports may still be using them. When netdev goes away
all of its BPF objects will be moved to other netdevs of the
device, and only destroyed when last netdev is unregistered.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently we have two lists of offloaded objects - programs and maps.
Netdevice unregister notifier scans those lists to orphan objects
associated with device being unregistered. This puts unnecessary
(even if negligible) burden on all netdev unregister calls in BPF-
-enabled kernel. The lists of objects may potentially get long
making the linear scan even more problematic. There haven't been
complaints about this mechanisms so far, but it is suboptimal.
Instead of relying on notifiers, make the few BPF-capable drivers
register explicitly for BPF offloads. The programs and maps will
now be collected per-device not on a global list, and only scanned
for removal when driver unregisters from BPF offloads.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
A set of new API functions exported for the drivers will soon use
'bpf_offload_dev_' as a prefix. Rename the bpf_offload_dev_match()
which is internal to the core (used by the verifier) to avoid any
confusion.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pointer sg is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'sg' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The progs local variable in compute_effective_progs() is marked
as __rcu, which is not correct. This is a local pointer, which
is initialized by bpf_prog_array_alloc(), which also now
returns a generic non-rcu pointer.
The real rcu-protected pointer is *array (array is a pointer
to an RCU-protected pointer), so the assignment should be performed
using rcu_assign_pointer().
Fixes: 324bda9e6c ("bpf: multi program support for cgroup+bpf")
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently the return type of the bpf_prog_array_alloc() is
struct bpf_prog_array __rcu *, which is not quite correct.
Obviously, the returned pointer is a generic pointer, which
is valid for an indefinite amount of time and it's not shared
with anyone else, so there is no sense in marking it as __rcu.
This change eliminate the following sparse warnings:
kernel/bpf/core.c:1544:31: warning: incorrect type in return expression (different address spaces)
kernel/bpf/core.c:1544:31: expected struct bpf_prog_array [noderef] <asn:4>*
kernel/bpf/core.c:1544:31: got void *
kernel/bpf/core.c:1548:17: warning: incorrect type in return expression (different address spaces)
kernel/bpf/core.c:1548:17: expected struct bpf_prog_array [noderef] <asn:4>*
kernel/bpf/core.c:1548:17: got struct bpf_prog_array *<noident>
kernel/bpf/core.c:1681:15: warning: incorrect type in assignment (different address spaces)
kernel/bpf/core.c:1681:15: expected struct bpf_prog_array *array
kernel/bpf/core.c:1681:15: got struct bpf_prog_array [noderef] <asn:4>*
Fixes: 324bda9e6c ("bpf: multi program support for cgroup+bpf")
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit c72051d577 ("audit: use ktime_get_coarse_ts64() for time
access") converted audit's use of current_kernel_time64() to the
new ktime_get_coarse_ts64() function. Unfortunately this resulted
in incorrect timestamps, e.g. events stamped with the year 1969
despite it being 2018. This patch corrects this by using
ktime_get_coarse_real_ts64() just like the current_kernel_time64()
wrapper.
Fixes: c72051d577 ("audit: use ktime_get_coarse_ts64() for time access")
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Way back in 4.9, we committed 4cd13c21b2 ("softirq: Let ksoftirqd do
its job"), and ever since we've had small nagging issues with it. For
example, we've had:
1ff688209e ("watchdog: core: make sure the watchdog_worker is not deferred")
8d5755b3f7 ("watchdog: softdog: fire watchdog even if softirqs do not get to run")
217f697436 ("net: busy-poll: allow preemption in sk_busy_loop()")
all of which worked around some of the effects of that commit.
The DVB people have also complained that the commit causes excessive USB
URB latencies, which seems to be due to the USB code using tasklets to
schedule USB traffic. This seems to be an issue mainly when already
living on the edge, but waiting for ksoftirqd to handle it really does
seem to cause excessive latencies.
Now Hanna Hawa reports that this issue isn't just limited to USB URB and
DVB, but also causes timeout problems for the Marvell SoC team:
"I'm facing kernel panic issue while running raid 5 on sata disks
connected to Macchiatobin (Marvell community board with Armada-8040
SoC with 4 ARMv8 cores of CA72) Raid 5 built with Marvell DMA engine
and async_tx mechanism (ASYNC_TX_DMA [=y]); the DMA driver (mv_xor_v2)
uses a tasklet to clean the done descriptors from the queue"
The latency problem causes a panic:
mv_xor_v2 f0400000.xor: dma_sync_wait: timeout!
Kernel panic - not syncing: async_tx_quiesce: DMA error waiting for transaction
We've discussed simply just reverting the original commit entirely, and
also much more involved solutions (with per-softirq threads etc). This
patch is intentionally stupid and fairly limited, because the issue
still remains, and the other solutions either got sidetracked or had
other issues.
We should probably also consider the timer softirqs to be synchronous
and not be delayed to ksoftirqd (since they were the issue with the
earlier watchdog problems), but that should be done as a separate patch.
This does only the tasklet cases.
Reported-and-tested-by: Hanna Hawa <hannah@marvell.com>
Reported-and-tested-by: Josef Griebichler <griebichler.josef@gmx.at>
Reported-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 8370edea81 ("bin2c: move bin2c in scripts/basic") moved bin2c
to the scripts/basic/ directory, incorrectly stating "Kexec wants to
use bin2c and it wants to use it really early in the build process.
See arch/x86/purgatory/ code in later patches."
Commit bdab125c93 ("Revert "kexec/purgatory: Add clean-up for
purgatory directory"") and commit d6605b6bbe ("x86/build: Remove
unnecessary preparation for purgatory") removed the redundant
purgatory build magic entirely.
That means that the move of bin2c was unnecessary in the first place.
fixdep is the only host program that deserves to sit in the
scripts/basic/ directory.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The NULL pointer check in __free_irq() triggers a 'dereference before NULL
pointer check' warning in static code analysis. It turns out that the check
is redundant because all callers have a NULL pointer check already.
Remove it.
Signed-off-by: RAGHU Halharvi <raghuhack78@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20180717102009.7708-1-raghuhack78@gmail.com
The mm_struct always contains a cpumask bitmap, regardless of
CONFIG_CPUMASK_OFFSTACK. That means the first step can be to
simplify things, and simply have one bitmask at the end of the
mm_struct for the mm_cpumask.
This does necessitate moving everything else in mm_struct into
an anonymous sub-structure, which can be randomized when struct
randomization is enabled.
The second step is to determine the correct size for the
mm_struct slab object from the size of the mm_struct
(excluding the CPU bitmap) and the size the cpumask.
For init_mm we can simply allocate the maximum size this
kernel is compiled for, since we only have one init_mm
in the system, anyway.
Pointer magic by Mike Galbraith, to evade -Wstringop-overflow
getting confused by the dynamically sized array.
Tested-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Rik van Riel <riel@surriel.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-team@fb.com
Cc: luto@kernel.org
Link: http://lkml.kernel.org/r/20180716190337.26133-2-riel@surriel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Both the implementation and the users' expectation [1] for the various
wakeup primitives have evolved over time, but the documentation has not
kept up with these changes: brings it into 2018.
[1] http://lkml.kernel.org/r/20180424091510.GB4064@hirez.programming.kicks-ass.net
Also applied feedback from Alan Stern.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Akira Yokosawa <akiyks@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Daniel Lustig <dlustig@nvidia.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arch@vger.kernel.org
Cc: parri.andrea@gmail.com
Link: http://lkml.kernel.org/r/20180716180605.16115-12-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are 11 interpretations of the requirements described in the header
comment for smp_mb__after_spinlock(): one for each LKMM maintainer, and
one currently encoded in the Cat file. Stick to the latter (until a more
satisfactory solution is available).
This also reworks some snippets related to the barrier to illustrate the
requirements and to link them to the idioms which are relied upon at its
call sites.
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: akiyks@gmail.com
Cc: dhowells@redhat.com
Cc: j.alglave@ucl.ac.uk
Cc: linux-arch@vger.kernel.org
Cc: luc.maranget@inria.fr
Cc: npiggin@gmail.com
Cc: parri.andrea@gmail.com
Cc: stern@rowland.harvard.edu
Link: http://lkml.kernel.org/r/20180716180605.16115-11-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
wake_woken_function() synchronizes with wait_woken() as follows:
[wait_woken] [wake_woken_function]
entry->flags &= ~wq_flag_woken; condition = true;
smp_mb(); smp_wmb();
if (condition) wq_entry->flags |= wq_flag_woken;
break;
This commit replaces the above smp_wmb() with an smp_mb() in order to
guarantee that either wait_woken() sees the wait condition being true
or the store to wq_entry->flags in woken_wake_function() follows the
store in wait_woken() in the coherence order (so that the former can
eventually be observed by wait_woken()).
The commit also fixes a comment associated to set_current_state() in
wait_woken(): the comment pairs the barrier in set_current_state() to
the above smp_wmb(), while the actual pairing involves the barrier in
set_current_state() and the barrier executed by the try_to_wake_up()
in wake_woken_function().
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akiyks@gmail.com
Cc: boqun.feng@gmail.com
Cc: dhowells@redhat.com
Cc: j.alglave@ucl.ac.uk
Cc: linux-arch@vger.kernel.org
Cc: luc.maranget@inria.fr
Cc: npiggin@gmail.com
Cc: parri.andrea@gmail.com
Cc: stern@rowland.harvard.edu
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/20180716180605.16115-10-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull RCU updates from Paul E. McKenney:
- An optimization and a fix for RCU expedited grace periods, with
the fix being from Boqun Feng.
- Miscellaneous fixes, including a lockdep-annotation fix from
Boqun Feng.
- SRCU updates.
- Updates to rcutorture and associated scripting.
- Introduce grace-period sequence numbers to the RCU-bh, RCU-preempt,
and RCU-sched flavors, replacing the old ->gpnum and ->completed
pair of fields. This change allows lockless code to obtain the
complete grace-period state with a single READ_ONCE(), which is
needed to maintain tolerable lock contention during the upcoming
consolidation of the three RCU flavors. Note that grace-period
sequence numbers are already used by rcu_barrier(), expedited
RCU grace periods, and SRCU, and are thus already heavily used
and well-tested. Joel Fernandes contributed a number of excellent
fixes and improvements.
- Clean up some grace-period-reporting loose ends, including
improving the handling of quiescent states from offline CPUs
and fixing some false-positive WARN_ON_ONCE() invocations.
(Strictly speaking, the WARN_ON_ONCE() invocations were quite
correct, but their invariants were (harmlessly) violated by the
earlier sloppy handling of quiescent states from offline CPUs.)
In addition, improve grace-period forward-progress guarantees so
as to allow removal of fail-safe checks that required otherwise
needless lock acquisitions. Finally, add more diagnostics to
help debug the upcoming consolidation of the RCU-bh, RCU-preempt,
and RCU-sched flavors.
- Additional miscellaneous fixes, including those contributed by
Byungchul Park, Mauro Carvalho Chehab, Joe Perches, Joel Fernandes,
Steven Rostedt, Andrea Parri, and Neil Brown.
- Additional torture-test changes, including several contributed by
Arnd Bergmann and Joel Fernandes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Both the init_module and finit_module syscalls call either directly
or indirectly the security_kernel_read_file LSM hook. This patch
replaces the direct call in init_module with a call to the new
security_kernel_load_data hook and makes the corresponding changes
in SELinux, LoadPin, and IMA.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
In order for LSMs and IMA-appraisal to differentiate between kexec_load
and kexec_file_load syscalls, both the original and new syscalls must
call an LSM hook. This patch adds a call to security_kernel_load_data()
in the original kexec_load syscall.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Serge Hallyn <serge@hallyn.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
Support for immediate flag was removed by commit d0807da78e
("livepatch: Remove immediate feature"). We bail out during
patch registration for architectures, those don't support
reliable stack trace. Remove the check in klp_try_switch_task(),
as its not required.
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some of the comments in the perf events code use articles incorrectly,
using 'a' for words beginning with a vowel sound, where 'an' should be
used.
Signed-off-by: Tobias Tefke <tobias.tefke@tutanota.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: jolsa@redhat.com
Cc: namhyung@kernel.org
Link: http://lkml.kernel.org/r/20180709105715.22938-1-tobias.tefke@tutanota.com
[ Fix a few more perf related 'a event' typo fixes from all around the kernel and tooling tree. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
get_cpu() disables preemption for the entire sched_fork() function.
This get_cpu() was introduced in commit:
dd41f596cd ("sched: cfs core code")
... which also invoked sched_balance_self() and this function
required preemption do be off.
Today, sched_balance_self() seems to be moved to ->task_fork callback
which is invoked while the ->pi_lock is held.
set_load_weight() could invoke reweight_task() which then via $callchain
might end up in smp_processor_id() but since `update_load' is false
this won't happen.
I didn't find any this_cpu*() or similar usage during the initialisation
of the task_struct.
The `cpu' value (from get_cpu()) is only used later in __set_task_cpu()
while the ->pi_lock lock is held.
Based on this it is possible to remove get_cpu() and use
smp_processor_id() for the `cpu' variable without breaking anything.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180706130615.g2ex2kmfu5kcvlq6@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The time spent executing IRQ handlers can be significant but it is not reflected
in the utilization of CPU when deciding to choose an OPP. Now that we have
access to this metric, schedutil can take it into account when selecting
the OPP for a CPU.
RQS utilization don't see the time spend under interrupt context and report
their value in the normal context time window. We need to compensate this when
adding interrupt utilization
The CPU utilization is:
IRQ util_avg + (1 - IRQ util_avg / max capacity ) * /Sum rq util_avg
A test with iperf on hikey (octo arm64) gives the following speedup:
iperf -c server_address -r -t 5
w/o patch w/ patch
Tx 276 Mbits/sec 304 Mbits/sec +10%
Rx 299 Mbits/sec 328 Mbits/sec +9%
8 iterations
stdev is lower than 1%
Only WFI idle state is enabled (shallowest idle state).
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten.Rasmussen@arm.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: claudio@evidence.eu.com
Cc: daniel.lezcano@linaro.org
Cc: dietmar.eggemann@arm.com
Cc: joel@joelfernandes.org
Cc: juri.lelli@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: patrick.bellasi@arm.com
Cc: quentin.perret@arm.com
Cc: rjw@rjwysocki.net
Cc: valentin.schneider@arm.com
Link: http://lkml.kernel.org/r/1530200714-4504-8-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
interrupt and steal time are the only remaining activities tracked by
rt_avg. Like for sched classes, we can use PELT to track their average
utilization of the CPU. But unlike sched class, we don't track when
entering/leaving interrupt; Instead, we take into account the time spent
under interrupt context when we update rqs' clock (rq_clock_task).
This also means that we have to decay the normal context time and account
for interrupt time during the update.
That's also important to note that because:
rq_clock == rq_clock_task + interrupt time
and rq_clock_task is used by a sched class to compute its utilization, the
util_avg of a sched class only reflects the utilization of the time spent
in normal context and not of the whole time of the CPU. The utilization of
interrupt gives an more accurate level of utilization of CPU.
The CPU utilization is:
avg_irq + (1 - avg_irq / max capacity) * /Sum avg_rq
Most of the time, avg_irq is small and neglictible so the use of the
approximation CPU utilization = /Sum avg_rq was enough.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten.Rasmussen@arm.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: claudio@evidence.eu.com
Cc: daniel.lezcano@linaro.org
Cc: dietmar.eggemann@arm.com
Cc: joel@joelfernandes.org
Cc: juri.lelli@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: patrick.bellasi@arm.com
Cc: quentin.perret@arm.com
Cc: rjw@rjwysocki.net
Cc: valentin.schneider@arm.com
Cc: viresh.kumar@linaro.org
Link: http://lkml.kernel.org/r/1530200714-4504-7-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add both CFS and RT utilization when selecting an OPP for CFS tasks as RT
can preempt and steal CFS's running time.
RT util_avg is used to take into account the utilization of RT tasks
on the CPU when selecting OPP. If a RT task migrate, the RT utilization
will not migrate but will decay over time. On an overloaded CPU, CFS
utilization reflects the remaining utilization avialable on CPU. When RT
task migrates, the CFS utilization will increase when tasks will start to
use the newly available capacity. At the same pace, RT utilization will
decay and both variations will compensate each other to keep unchanged
overall utilization and will prevent any OPP drop.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten.Rasmussen@arm.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: claudio@evidence.eu.com
Cc: daniel.lezcano@linaro.org
Cc: dietmar.eggemann@arm.com
Cc: joel@joelfernandes.org
Cc: juri.lelli@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: patrick.bellasi@arm.com
Cc: quentin.perret@arm.com
Cc: rjw@rjwysocki.net
Cc: valentin.schneider@arm.com
Link: http://lkml.kernel.org/r/1530200714-4504-4-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When a new task wakes-up for the first time, its initial utilization
is set to half of the spare capacity of its CPU. The current
implementation of post_init_entity_util_avg() uses SCHED_CAPACITY_SCALE
directly as a capacity reference. As a result, on a big.LITTLE system, a
new task waking up on an idle little CPU will be given ~512 of util_avg,
even if the CPU's capacity is significantly less than that.
Fix this by computing the spare capacity with arch_scale_cpu_capacity().
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: morten.rasmussen@arm.com
Cc: patrick.bellasi@arm.com
Link: http://lkml.kernel.org/r/20180612112215.25448-1-quentin.perret@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When scheduling is delayed for longer than the softlockup interrupt
period it is possible to double-queue the cpu_stop_work, causing list
corruption.
Cure this by adding a completion to track the cpu_stop_work's
progress.
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Rong Chen <rong.a.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 9cf57731b6 ("watchdog/softlockup: Replace "watchdog/%u" threads with cpu_stop_work")
Link: http://lkml.kernel.org/r/20180713104208.GW2494@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mark noticed that syzkaller is able to reliably trigger the following warning:
dl_rq->running_bw > dl_rq->this_bw
WARNING: CPU: 1 PID: 153 at kernel/sched/deadline.c:124 switched_from_dl+0x454/0x608
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 153 Comm: syz-executor253 Not tainted 4.18.0-rc3+ #29
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x458
show_stack+0x20/0x30
dump_stack+0x180/0x250
panic+0x2dc/0x4ec
__warn_printk+0x0/0x150
report_bug+0x228/0x2d8
bug_handler+0xa0/0x1a0
brk_handler+0x2f0/0x568
do_debug_exception+0x1bc/0x5d0
el1_dbg+0x18/0x78
switched_from_dl+0x454/0x608
__sched_setscheduler+0x8cc/0x2018
sys_sched_setattr+0x340/0x758
el0_svc_naked+0x30/0x34
syzkaller reproducer runs a bunch of threads that constantly switch
between DEADLINE and NORMAL classes while interacting through futexes.
The splat above is caused by the fact that if a DEADLINE task is setattr
back to NORMAL while in non_contending state (blocked on a futex -
inactive timer armed), its contribution to running_bw is not removed
before sub_rq_bw() gets called (!task_on_rq_queued() branch) and the
latter sees running_bw > this_bw.
Fix it by removing a task contribution from running_bw if the task is
not queued and in non_contending state while switched to a different
class.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Reviewed-by: Luca Abeni <luca.abeni@santannapisa.it>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: claudio@evidence.eu.com
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/20180711072948.27061-1-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When cpu_stop_queue_two_works() begins to wake the stopper threads, it does
so without preemption disabled, which leads to the following race
condition:
The source CPU calls cpu_stop_queue_two_works(), with cpu1 as the source
CPU, and cpu2 as the destination CPU. When adding the stopper threads to
the wake queue used in this function, the source CPU stopper thread is
added first, and the destination CPU stopper thread is added last.
When wake_up_q() is invoked to wake the stopper threads, the threads are
woken up in the order that they are queued in, so the source CPU's stopper
thread is woken up first, and it preempts the thread running on the source
CPU.
The stopper thread will then execute on the source CPU, disable preemption,
and begin executing multi_cpu_stop(), and wait for an ack from the
destination CPU's stopper thread, with preemption still disabled. Since the
worker thread that woke up the stopper thread on the source CPU is affine
to the source CPU, and preemption is disabled on the source CPU, that
thread will never run to dequeue the destination CPU's stopper thread from
the wake queue, and thus, the destination CPU's stopper thread will never
run, causing the source CPU's stopper thread to wait forever, and stall.
Disable preemption when waking the stopper threads in
cpu_stop_queue_two_works().
Fixes: 0b26351b91 ("stop_machine, sched: Fix migrate_swap() vs. active_balance() deadlock")
Co-Developed-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Co-Developed-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: peterz@infradead.org
Cc: matt@codeblueprint.co.uk
Cc: bigeasy@linutronix.de
Cc: gregkh@linuxfoundation.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1530655334-4601-1-git-send-email-isaacm@codeaurora.org
Pull timer fixes from Ingo Molnar:
"A clocksource driver fix and a revert"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: arm_arch_timer: Set arch_mem_timer cpumask to cpu_possible_mask
Revert "tick: Prefer a lower rating device only if it's CPU local device"
Pull rseq fixes from Ingo Molnar:
"Various rseq ABI fixes and cleanups: use get_user()/put_user(),
validate parameters and use proper uapi types, etc"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq/selftests: cleanup: Update comment above rseq_prepare_unload
rseq: Remove unused types_32_64.h uapi header
rseq: uapi: Declare rseq_cs field as union, update includes
rseq: uapi: Update uapi comments
rseq: Use get_user/put_user rather than __get_user/__put_user
rseq: Use __u64 for rseq_cs fields, validate user inputs
own patch internally for. I took it back in 4.13. Now he realizes that
he had a mistake, and swapped the values from what Android had. This
means that the old Android tools will break when using a new kernel
that has the new feature on it.
The options are:
1. To swap it back to what Android wants.
2. Add a command line option or something to do the swap
3. Just let Android carry a patch that swaps it back
Since it requires setting a tracing option to enable this anyway,
I doubt there are other users of this than Android. Thus, I've
decided to take option 1. If someone else is actually depending on the
order that is in the kernel, then we will have to revert this change
and go to option 2 or 3.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW0ib3BQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qpH2APwJb1C72w6/QF9QK8I7HWzK3BN+9KuK
xfJA+58HXzu7SgD+IXzhXW9tODU+sWbYr9cVOyj2ad6p8CYNDkPlVAJulwM=
=XJE5
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.18-rc3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixlet from Steven Rostedt:
"Joel Fernandes asked to add a feature in tracing that Android had its
own patch internally for. I took it back in 4.13. Now he realizes that
he had a mistake, and swapped the values from what Android had. This
means that the old Android tools will break when using a new kernel
that has the new feature on it.
The options are:
1. To swap it back to what Android wants.
2. Add a command line option or something to do the swap
3. Just let Android carry a patch that swaps it back
Since it requires setting a tracing option to enable this anyway, I
doubt there are other users of this than Android. Thus, I've decided
to take option 1. If someone else is actually depending on the order
that is in the kernel, then we will have to revert this change and go
to option 2 or 3"
* tag 'trace-v4.18-rc3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Reorder display of TGID to be after PID
The CPU_SMT_NOT_SUPPORTED state is set (if the processor does not support
SMT) when the sysfs SMT control file is initialized.
That was fine so far as this was only required to make the output of the
control file correct and to prevent writes in that case.
With the upcoming l1tf command line parameter, this needs to be set up
before the L1TF mitigation selection and command line parsing happens.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20180713142323.121795971@linutronix.de
The L1TF mitigation will gain a commend line parameter which allows to set
a combination of hypervisor mitigation and SMT control.
Expose cpu_smt_disable() so the command line parser can tweak SMT settings.
[ tglx: Split out of larger patch and made it preserve an already existing
force off state ]
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20180713142323.039715135@linutronix.de
Currently ftrace displays data in trace output like so:
_-----=> irqs-off
/ _----=> need-resched
| / _---=> hardirq/softirq
|| / _--=> preempt-depth
||| / delay
TASK-PID CPU TGID |||| TIMESTAMP FUNCTION
| | | | |||| | |
bash-1091 [000] ( 1091) d..2 28.313544: sched_switch:
However Android's trace visualization tools expect a slightly different
format due to an out-of-tree patch patch that was been carried for a
decade, notice that the TGID and CPU fields are reversed:
_-----=> irqs-off
/ _----=> need-resched
| / _---=> hardirq/softirq
|| / _--=> preempt-depth
||| / delay
TASK-PID TGID CPU |||| TIMESTAMP FUNCTION
| | | | |||| | |
bash-1091 ( 1091) [002] d..2 64.965177: sched_switch:
From kernel v4.13 onwards, during which TGID was introduced, tracing
with systrace on all Android kernels will break (most Android kernels
have been on 4.9 with Android patches, so this issues hasn't been seen
yet). From v4.13 onwards things will break.
The chrome browser's tracing tools also embed the systrace viewer which
uses the legacy TGID format and updates to that are known to be
difficult to make.
Considering this, I suggest we make this change to the upstream kernel
and backport it to all Android kernels. I believe this feature is merged
recently enough into the upstream kernel that it shouldn't be a problem.
Also logically, IMO it makes more sense to group the TGID with the
TASK-PID and the CPU after these.
Link: http://lkml.kernel.org/r/20180626000822.113931-1-joel@joelfernandes.org
Cc: jreck@google.com
Cc: tkjos@google.com
Cc: stable@vger.kernel.org
Fixes: 441dae8f2f ("tracing: Add support for display of tgid in trace output")
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The rcutorture test module currently increments both successes and error
for the barrier test upon error, which results in misleading statistics
being printed. This commit therefore changes the code to increment the
success counter only when the test actually passes.
This change was tested by by returning from the barrier callback without
incrementing the callback counter, thus introducing what appeared to
rcutorture to be rcu_barrier() failures.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
When rcutorture is built in to the kernel, an earlier patch detects
that and raises the priority of RCU's kthreads to allow rcutorture's
RCU priority boosting tests to succeed.
However, if rcutorture is built as a module, those priorities must be
raised manually via the rcutree.kthread_prio kernel boot parameter.
If this manual step is not taken, rcutorture's RCU priority boosting
tests will fail due to kthread starvation. One approach would be to
raise the default priority, but that risks breaking existing users.
Another approach would be to allow runtime adjustment of RCU's kthread
priorities, but that introduces numerous "interesting" race conditions.
This patch therefore instead detects too-low priorities, and prints a
message and disables the RCU priority boosting tests in that case.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The get_seconds() call is deprecated because it overflows on 32-bit
architectures. The algorithm in rcu_torture_stall() can deal with
the overflow, but another problem here is that using a CLOCK_REALTIME
stamp can lead to a false-positive stall warning when a settimeofday()
happens concurrently.
Using ktime_get_seconds() instead avoids those issues and will never
overflow. The added cast to 'unsigned long' however is necessary to
make ULONG_CMP_LT() work correctly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, with RCU_BOOST disabled, I get no failures when forcing
rcutorture to test RCU boost priority inversion. The reason seems to be
that we don't check for failures if the callback never ran at all for
the duration of the boost-test loop.
Further, the 'rtb' and 'rtbf' counters seem to be used inconsistently.
'rtb' is incremented at the start of each test and 'rtbf' is incremented
per-cpu on each failure of call_rcu. So its possible 'rtbf' > 'rtb'.
To test the boost with rcutorture, I did following on a 4-CPU x86 machine:
modprobe rcutorture test_boost=2
sleep 20
rmmod rcutorture
With patch:
rtbf: 8 rtb: 12
Without patch:
rtbf: 0 rtb: 2
In summary this patch:
- Increments failed and total test counters once per boost-test.
- Checks for failure cases correctly.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently rcutorture is not able to torture RCU boosting properly. This
is because the rcutorture's boost threads which are doing the torturing
may be throttled due to RT throttling.
This patch makes rcutorture use the right torture technique (unthrottled
rcutorture boost tasks) for torturing RCU so that the test fails
correctly when no boost is available.
Currently this requires accessing sysctl_sched_rt_runtime directly, but
that should be Ok since rcutorture is test code. Such direct access is
also only possible if rcutorture is used as a built-in so make it
conditional on that.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
For RCU implementations supporting multiple types of reader protection,
rcutorture currently randomly selects the combinations of types of
protection for each phase of each reader. The problem with this,
for example, given the four kinds of protection for RCU-sched
(local_irq_disable(), local_bh_disable(), preempt_disable(), and
rcu_read_lock_sched()), the reader will be protected by a single
mechanism only 25% of the time. We really heavier testing of single
read-side mechanisms.
This commit therefore uses only a single mechanism about 60% of the time,
half of the time explicitly and one-eighth of the time by chance.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit enables rcutorture to test whether RCU properly aggregates
different types of read-side critical sections into a larger section
covering the set. It does this by extending an initial read-side
critical section randomly for a random number of extensions. There is
a new rcu_torture_ops field ->extendable that specifies what extensions
are permitted for a given flavor of RCU (for example, SRCU does not
permit any extensions, while RCU-sched permits all types). Note that
if a given operation (for example, local_bh_disable()) extends an RCU
read-side critical section, then rcutorture feels free to also start
and end the critical section with that operation's type of disabling.
Disabling operations include local_bh_disable(), local_irq_disable(),
and preempt_disable(). This commit also adds a new "busted_srcud"
torture type, which verifies rcutorture's ability to detect extensions
of RCU read-side critical sections that are not handled. Gotta test
the test, after all!
Note that it is not legal to invoke local_bh_disable() with interrupts
disabled, and this transition is avoided by overriding the random-number
generator when it wants to call local_bh_disable() while interrupts
are disabled. The code instead leaves both interrupts and bh/softirq
disabled in this case.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit saves a few lines of code by making rcu_torture_timer()
invoke rcu_torture_one_read(), thus completing the consolidation of
code between rcu_torture_timer() and rcu_torture_reader().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, the rcu_torture_timer() function uses a single global
torture_random_state structure protected by a single global lock.
This conflicts to some extent with performance and scalability,
but even more with the goal of consolidating read-side testing
with rcu_torture_reader(). This commit therefore creates a per-CPU
torture_random_state structure for use by rcu_torture_timer() and
eliminates the lock.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Make rcu_torture_timer_rand static, per 0day Test Robot report. ]
Currently, rcu_torture_timer() relies on a lock to guard updates to
n_rcu_torture_timers. Unfortunately, consolidating code with
rcu_torture_reader() will dispense with this lock. This commit
therefore makes n_rcu_torture_timers be an atomic_long_t and uses
atomic_long_inc() to carry out the update.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit extracts the code executed on each pass through the loop
in rcu_torture_reader() into a new rcu_torture_one_read() function.
This new function will also be used by rcu_torture_timer().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Back when RCU had a debugfs interface, there was a test version and
sequence number that allowed associating debugfs data with a particular
test run, where the test run started with modprobe and ended with rmmod,
which was how tests were run back on the old ABAT system within IBM.
But rcutorture testing no longer runs on ABAT, and there is no longer an
RCU debugfs interface, so there is no longer any need for test versions
and sequence numbers.
This commit therefore removes the rcutorture_record_test_transition()
and rcutorture_record_progress() functions, and along with them the
rcutorture_testseq and rcutorture_vernum variables that they update.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Some RCU bugs have been sensitive to the frequency of CPU-hotplug
operations, which have been gradually increased over time. But this
frequency is now at the one-second lower limit that can be specified using
the rcutorture.onoff_interval kernel parameter. This commit therefore
changes the units of rcutorture.onoff_interval from seconds to jiffies,
and also sets the value specified for this kernel parameter in the TREE03
rcutorture scenario to 200, which is 200 milliseconds for HZ=1000.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcutorture RCU priority boosting tests fail even with CONFIG_RCU_BOOST
set because rcutorture's threads run at the same priority as the default
RCU kthreads (RT class with priority of 1).
This patch checks if RCU torture is built into the kernel and if so,
assigns RT priority 1 to the RCU threads, allowing the rcutorture boost
tests to pass.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds the SRCU grace-period number to the rcutorture statistics
printout, which allows it to be compared to the rcutorture "Writer stall
state" message.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The ->dynticks_nmi_nesting field records the nesting depth of both
interrupt and NMI handlers. Because the kernel can enter interrupts
and never leave them (and vice versa) and because NMIs can interrupt
manipulation of the ->dynticks_nmi_nesting field, the values in this
field must be both chosen and maniupated very carefully. As a result,
although the value is zero when the corresponding CPU is executing
neither an interrupt nor an NMI handler, it is 4,611,686,018,427,387,906
on 64-bit systems when there is a single level of interrupt/NMI handling
in progress.
This number is difficult to remember and interpret, so this commit
switches the output to hexadecimal, resulting in the much nicer
0x4000000000000002.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The current implementatation of rcu_seq_diff() follows tradition in
providing a rough-and-ready approximation of the number of elapsed grace
periods between the two rcu_seq values. However, this difference is
used to flag RCU-failure "near misses", which can be a valuable debugging
aid, so more exactitude would be an improvement. This commit therefore
improves the accuracy of rcu_seq_diff().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, the range of jiffies_till_{first,next}_fqs are checked and
adjusted on and on in the loop of rcu_gp_kthread on runtime.
However, it's enough to check them only when setting them, not every
time in the loop. So make them handled on a setting time via sysfs.
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds any in-the-future ->gp_seq_needed fields to the
diagnostics for an rcutorture writer stall warning message.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
At the end of rcu_tasks_kthread() there's a lonely
schedule_timeout_uninterruptible() call with no apparent rationale for
its existence. But there is. It is to keep the thread from going into
a tight loop if there's some anomaly. That really needs a comment.
Link: http://lkml.kernel.org/r/20180524223839.GU3803@linux.vnet.ibm.com
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Joel Fernandes found that the synchronize_rcu_tasks() was taking a
significant amount of time. He demonstrated it with the following test:
# cd /sys/kernel/tracing
# while [ 1 ]; do x=1; done &
# echo '__schedule_bug:traceon' > set_ftrace_filter
# time echo '!__schedule_bug:traceon' > set_ftrace_filter;
real 0m1.064s
user 0m0.000s
sys 0m0.004s
Where it takes a little over a second to perform the synchronize,
because there's a loop that waits 1 second at a time for tasks to get
through their quiescent points when there's a task that must be waited
for.
After discussion we came up with a simple way to wait for holdouts but
increase the time for each iteration of the loop but no more than a
full second.
With the new patch we have:
# time echo '!__schedule_bug:traceon' > set_ftrace_filter;
real 0m0.131s
user 0m0.000s
sys 0m0.004s
Which drops it down to 13% of what the original wait time was.
Link: http://lkml.kernel.org/r/20180523063815.198302-2-joel@joelfernandes.org
Reported-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Suggested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
rcu_seq_snap may be tricky to decipher. Lets document how it works with
an example to make it easier.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Shrink comment as suggested by Peter Zijlstra. ]
Currently, rcu_check_gp_start_stall() waits for one second after the first
request before complaining that a grace period has not yet started. This
was desirable while testing the conversion from ->future_gp_needed[] to
->gp_seq_needed, but it is a bit on the hair-trigger side for production
use under heavy load. This commit therefore makes this wait time be
exactly that of the RCU CPU stall warning, allowing easy adjustment of
both timeouts to suit the distribution or installation at hand.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_cpu_has_callbacks() function is now used in all configurations,
so this commit removes the __maybe_unused.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This function is in rcuperf.c, which is not an include file, so there
is no problem dropping the "inline", especially given that this function
is invoked only twice per rcuperf run. This commit therefore delegates
the inlining decision to the compiler by dropping the "inline".
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This function is in rcutorture.c, which is not an include file, so there
is no problem dropping the "inline", especially given that this function
is invoked only twice per rcutorture run. This commit therefore delegates
the inlining decision to the compiler by dropping the "inline".
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
These functions are in kernel/rcu/tree.c, which is not an include file,
so there is no problem dropping the "inline", especially given that these
functions are nowhere near a fastpath. This commit therefore delegates
the inlining decision to the compiler by dropping the "inline".
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
One danger of using __maybe_unused is that the compiler doesn't yell
at you when you remove the last reference, witness rcu_bind_gp_kthread()
and its local variable "cpu". This commit removes this local variable.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_kick_nohz_cpu() function is no longer used, and the functionality
it used to provide is now provided by a call to resched_cpu() in the
force-quiescent-state function rcu_implicit_dynticks_qs(). This commit
therefore removes rcu_kick_nohz_cpu().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_preempt_qs() function only applies to the CPU, not the task.
A task really is allowed to invoke this function while in an RCU-preempt
read-side critical section, but only if it has first added itself to
some leaf rcu_node structure's ->blkd_tasks list.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_dynticks_momentary_idle() function is invoked only from
rcu_momentary_dyntick_idle(), and neither function is particularly
large. This commit therefore saves a few lines by inlining
rcu_dynticks_momentary_idle() into rcu_momentary_dyntick_idle().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
If any scheduling-clock interrupt interrupts an RCU-preempt read-side
critical section, the interrupted task's ->rcu_read_unlock_special.b.need_qs
field is set. This causes the outermost rcu_read_unlock() to incur the
extra overhead of calling into rcu_read_unlock_special(). This commit
reduces that overhead by setting ->rcu_read_unlock_special.b.need_qs only
if the grace period has been in effect for more than one second.
Why one second? Because this is comfortably smaller than the minimum
RCU CPU stall-warning timeout of three seconds, but long enough that the
.need_qs marking should happen quite rarely. And if your RCU read-side
critical section has run on-CPU for a full second, it is not unreasonable
to invest some CPU time in ending the grace period quickly.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The naming and comments associated with some RCU-tasks code make
the faulty assumption that context switches due to cond_resched()
are voluntary. As several people pointed out, this is not the case.
This commit therefore updates function names and comments to better
reflect current reality.
Reported-by: Byungchul Park <byungchul.park@lge.com>
Reported-by: Joel Fernandes <joel@joelfernandes.org>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit also adjusts some whitespace while in the area.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Revert string-breaking %s as requested by Andy Shevchenko. ]
We expect a quiescent state of TASKS_RCU when cond_resched_tasks_rcu_qs()
is called, no matter whether it actually be scheduled or not. However,
it currently doesn't report the quiescent state when the task enters
into __schedule() as it's called with preempt = true. So make it report
the quiescent state unconditionally when cond_resched_tasks_rcu_qs() is
called.
And in TINY_RCU, even though the quiescent state of rcu_bh also should
be reported when the tick interrupt comes from user, it doesn't. So make
it reported.
Lastly in TREE_RCU, rcu_note_voluntary_context_switch() should be
reported when the tick interrupt comes from not only user but also idle,
as an extended quiescent state.
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Simplify rcutiny portion given no RCU-tasks for !PREEMPT. ]
Because rcu_read_unlock_special() is no longer used outside of
kernel/rcu/tree_plugin.h, this commit makes it static.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
CPUs are expected to report quiescent states when coming online and
when going offline, and grace-period initialization is supposed to
handle any race conditions where a CPU's ->qsmask bit is set just after
it goes offline. This commit adds diagnostics for the case where an
offline CPU nevertheless has a grace period waiting on it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Grace-period initialization first processes any recent CPU-hotplug
operations, and then initializes state for the new grace period. These
two phases of initialization are currently not distinguished in debug
prints, but the distinction is valuable in a number of debug situations.
This commit therefore introduces two new values for ->gp_state,
RCU_GP_ONOFF and RCU_GP_INIT, in order to make this distinction.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Interactions between CPU-hotplug operations and grace-period
initialization can result in dump_blkd_tasks(). One of the first
debugging actions in this case is to search back in dmesg to work
out which of the affected rcu_node structure's CPUs are online and to
determine the last CPU-hotplug operation affecting any of those CPUs.
This can be laborious and error-prone, especially when console output
is lost.
This commit therefore causes dump_blkd_tasks() to dump the state of
the affected rcu_node structure's CPUs and the last grace period during
which the last offline and online operation affected each of these CPUs.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit updates dump_blkd_tasks() to print out quiescent-state
bitmasks for the rcu_node structures further up the tree. This
information helps debugging of interactions between CPU-hotplug
operations and RCU grace-period initialization.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that quiescent states for newly offlined CPUs are reported either
when that CPU goes offline or at the end of grace-period initialization,
the CPU-hotplug failsafe in the force-quiescent-state code path is no
longer needed.
This commit therefore removes this failsafe.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that quiescent-state reporting is fully event-driven, this commit
removes the check for a lost quiescent state from force_qs_rnp().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The main race with the early part of grace-period initialization appears
to be with CPU hotplug. To more fully open this race window, this commit
moves the rcu_gp_slow() from the beginning of the early initialization
loop to follow that loop, thus widening the race window, especially for
the rcu_node structures that are initialized last. This commit also
expands rcutree.gp_preinit_delay from 3 to 12, giving the same overall
delay in the grace period, but concentrated in the spot where it will
do the most good.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
RCU should only be waiting on CPUs that were online at the time that the
current grace period started. Failure to abide by this rule can result
in confusing splats during grace-period cleanup and initialization.
This commit therefore adds a check to RCU-preempt's preempted-task
queuing that checks for waiting on newly onlined CPUs.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Without special fail-safe quiescent-state-propagation checks, grace-period
hangs can result from the following scenario:
1. CPU 1 goes offline.
2. Because CPU 1 is the only CPU in the system blocking the current
grace period, the grace period ends as soon as
rcu_cleanup_dying_idle_cpu()'s call to rcu_report_qs_rnp()
returns.
3. At this point, the leaf rcu_node structure's ->lock is no longer
held: rcu_report_qs_rnp() has released it, as it must in order
to awaken the RCU grace-period kthread.
4. At this point, that same leaf rcu_node structure's ->qsmaskinitnext
field still records CPU 1 as being online. This is absolutely
necessary because the scheduler uses RCU (in this case on the
wake-up path while awakening RCU's grace-period kthread), and
->qsmaskinitnext contains RCU's idea as to which CPUs are online.
Therefore, invoking rcu_report_qs_rnp() after clearing CPU 1's
bit from ->qsmaskinitnext would result in a lockdep-RCU splat
due to RCU being used from an offline CPU.
5. RCU's grace-period kthread awakens, sees that the old grace period
has completed and that a new one is needed. It therefore starts
a new grace period, but because CPU 1's leaf rcu_node structure's
->qsmaskinitnext field still shows CPU 1 as being online, this new
grace period is initialized to wait for a quiescent state from the
now-offline CPU 1.
6. Without the fail-safe force-quiescent-state checks, there would
be no quiescent state from the now-offline CPU 1, which would
eventually result in RCU CPU stall warnings and memory exhaustion.
It would be good to get rid of the special fail-safe quiescent-state
propagation checks, and thus it would be good to fix things so that
the above scenario cannot happen. This commit therefore adds a new
->ofl_lock to the rcu_state structure. This lock is held by rcu_gp_init()
across the applying of buffered online and offline operations to the
rcu_node tree, and it is also held by rcu_cleanup_dying_idle_cpu()
when buffering a new offline operation. This prevents rcu_gp_init()
from acquiring the leaf rcu_node structure's lock during the interval
between when rcu_cleanup_dying_idle_cpu() invokes rcu_report_qs_rnp(),
which releases ->lock and the re-acquisition of that same lock.
This in turn prevents the failure scenario outlined above, and will
hopefully eventually allow removal of the offline-CPU checks from the
force-quiescent-state code path.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Without special fail-safe quiescent-state-propagation checks, grace-period
hangs can result from the following scenario:
1. A task running on a given CPU is preempted in its RCU read-side
critical section.
2. That CPU goes offline, and there are now no online CPUs
corresponding to that CPU's leaf rcu_node structure.
3. The rcu_gp_init() function does the first phase of grace-period
initialization, and sets the aforementioned leaf rcu_node
structure's ->qsmaskinit field to all zeroes. Because there
is a blocked task, it does not propagate the zeroing of either
->qsmaskinit or ->qsmaskinitnext up the rcu_node tree.
4. The task resumes on some other CPU and exits its critical section.
There is no grace period in progress, so the resulting quiescent
state is not reported up the tree.
5. The rcu_gp_init() function does the second phase of grace-period
initialization, which results in the leaf rcu_node structure
being initialized to expect no further quiescent states, but
with that structure's parent expecting a quiescent-state report.
The parent will never receive a quiescent state from this leaf
rcu_node structure, so the grace period will hang, resulting in
RCU CPU stall warnings.
It would be good to get rid of the special fail-safe quiescent-state
propagation checks. This commit therefore checks the leaf rcu_node
structure's ->wait_blkd_tasks field during grace-period initialization.
If this flag is set, the rcu_report_qs_rnp() is invoked to immediately
report the possible quiescent state. While in the neighborhood, this
commit also report quiescent states for any CPUs that went offline between
the two phases of grace-period initialization, thus reducing grace-period
delays and hopefully eventually allowing removal of offline-CPU checks
from the force-quiescent-state code path.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Consider the following sequence of events in a PREEMPT=y kernel:
1. All CPUs corresponding to a given leaf rcu_node structure are
offline.
2. The first phase of the rcu_gp_init() function's grace-period
initialization runs, and sets that rcu_node structure's
->qsmaskinit to zero, as it should.
3. One of the CPUs corresponding to that rcu_node structure comes
back online. Note that because this CPU came online after the
grace period started, this grace period can safely ignore this
newly onlined CPU.
4. A task running on the newly onlined CPU enters an RCU-preempt
read-side critical section, and is then preempted. Because
the corresponding rcu_node structure's ->qsmask is zero,
rcu_preempt_ctxt_queue() leaves the rcu_node structure's
->gp_tasks field NULL, as it should.
5. The rcu_gp_init() function continues running the second phase of
grace-period initialization. The ->qsmask field of the parent of
the aforementioned leaf rcu_node structure is set to not expect
a quiescent state from the leaf, as is only right and proper.
However, when rcu_gp_init() reaches the leaf, it invokes
rcu_preempt_check_blocked_tasks(), which sees that the leaf's
->blkd_tasks list is non-empty, and therefore sets the leaf's
->gp_tasks field to reference the first task on that list.
6. The grace period ends before the preempted task resumes, which
is perfectly fine, given that this grace period was under no
obligation to wait for that task to exit its late-starting
RCU-preempt read-side critical section. Unfortunately, the
leaf's ->gp_tasks field is non-NULL, so rcu_gp_cleanup() splats.
After all, it appears to rcu_gp_cleanup() that the grace period
failed to wait for a task that was supposed to be blocking that
grace period.
This commit avoids this false-positive splat by adding a check of both
->qsmaskinit and ->wait_blkd_tasks to rcu_preempt_check_blocked_tasks().
If both ->qsmaskinit and ->wait_blkd_tasks are zero, then the task must
have entered its RCU-preempt read-side critical section late (after all,
the CPU that it is running on was not online at that time), which means
that the upper-level rcu_node structure won't be waiting for anything
on the leaf anyway.
If ->wait_blkd_tasks is non-zero, then there is at least one task on
ths rcu_node structure's ->blkd_tasks list whose RCU read-side
critical section predates the current grace period. If ->qsmaskinit
is non-zero, there is at least one CPU that was online at the start
of the current grace period. Thus, if both are zero, there is nothing
to wait for.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Consider the following sequence of events in a PREEMPT=y kernel:
1. All but one of the CPUs corresponding to a given leaf rcu_node
structure go offline. Each of these CPUs clears its bit in that
structure's ->qsmaskinitnext field.
2. A new grace period starts, and rcu_gp_init() scans the leaf
rcu_node structures, applying CPU-hotplug changes since the
start of the previous grace period, including those changes in
#1 above. This copies each leaf structure's ->qsmaskinitnext
to its ->qsmask field, which represents the CPUs that this new
grace period will wait on. Each copy operation is done holding
the corresponding leaf rcu_node structure's ->lock, and at the
end of this scan, rcu_gp_init() holds no locks.
3. The last CPU corresponding to #1's leaf rcu_node structure goes
offline, clearing its bit in that structure's ->qsmaskinitnext
field, but not touching the ->qsmaskinit field. Note that
rcu_gp_init() is not currently holding any locks! This CPU does
-not- report a quiescent state because the grace period has not
yet initialized itself sufficiently to have set any bits in any
of the leaf rcu_node structures' ->qsmask fields.
4. The rcu_gp_init() function continues initializing the new grace
period, copying each leaf rcu_node structure's ->qsmaskinit
field to its ->qsmask field while holding the corresponding ->lock.
This sets the ->qsmask bit corresponding to #3's CPU.
5. Before the grace period ends, #3's CPU comes back online.
Because te grace period has not yet done any force-quiescent-state
scans (which would report a quiescent state on behalf of any
offline CPUs), this CPU's ->qsmask bit is still set.
6. A task running on the newly onlined CPU is preempted while in
an RCU read-side critical section. Because this CPU's ->qsmask
bit is net, not only does this task queue itself on the leaf
rcu_node structure's ->blkd_tasks list, it also sets that
structure's ->gp_tasks pointer to reference it.
7. The grace period started in #1 above comes to an end. This
results in rcu_gp_cleanup() being invoked, which, among other
things, checks to make sure that there are no tasks blocking the
just-ended grace period, that is, that all ->gp_tasks pointers
are NULL. The ->gp_tasks pointer corresponding to the task
preempted in #3 above is non-NULL, which results in a splat.
This splat is a false positive. The task's RCU read-side critical
section cannot have begun before the just-ended grace period because
this would mean either: (1) The CPU came online before the grace period
started, which cannot have happened because the grace period started
before that CPU went offline, or (2) The task started its RCU read-side
critical section on some other CPU, but then it would have had to have
been preempted before migrating to this CPU, which would mean that it
would have instead queued itself on that other CPU's rcu_node structure.
RCU's grace periods thus are working correctly. Or, more accurately,
that remaining bugs in RCU's grace periods are elsewhere.
This commit eliminates this false positive by adding code to the end
of rcu_cpu_starting() that reports a quiescent state to RCU, which has
the side-effect of clearing that CPU's ->qsmask bit, preventing the
above scenario. This approach has the added benefit of more promptly
reporting quiescent states corresponding to offline CPUs. Nevertheless,
this commit does -not- remove the need for the force-quiescent-state
scans to check for offline CPUs, given that a CPU might remain offline
indefinitely. And without the checks in the force-quiescent-state scans,
the grace period would also persist indefinitely, which could result in
hangs or memory exhaustion.
Note well that the call to rcu_report_qs_rnp() reporting the quiescent
state must come -after- the setting of this CPU's bit in the leaf rcu_node
structure's ->qsmaskinitnext field. Otherwise, lockdep-RCU will complain
bitterly about quiescent states coming from an offline CPU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Consider the following sequence of events in a PREEMPT=y kernel:
1. All CPUs corresponding to a given rcu_node structure go offline.
A new grace period starts just after the CPU-hotplug code path
does its synchronize_rcu() for the last CPU, so at least this
CPU is present in that structure's ->qsmask.
2. Before the grace period ends, a CPU comes back online, and not
just any CPU, but the one corresponding to a non-zero bit in
the leaf rcu_node structure's ->qsmask.
3. A task running on the newly onlined CPU is preempted while in
an RCU read-side critical section. Because this CPU's ->qsmask
bit is net, not only does this task queue itself on the leaf
rcu_node structure's ->blkd_tasks list, it also sets that
structure's ->gp_tasks pointer to reference it.
4. The grace period started in #1 above comes to an end. This
results in rcu_gp_cleanup() being invoked, which, among other
things, checks to make sure that there are no tasks blocking the
just-ended grace period, that is, that all ->gp_tasks pointers
are NULL. The ->gp_tasks pointer corresponding to the task
preempted in #3 above is non-NULL, which results in a splat.
This splat is a false positive. The task's RCU read-side critical
section cannot have begun before the just-ended grace period because
this would mean either: (1) The CPU came online before the grace period
started, which cannot have happened because the grace period started
before that CPU was all the way offline, or (2) The task started its
RCU read-side critical section on some other CPU, but then it would
have had to have been preempted before migrating to this CPU, which
would mean that it would have instead queued itself on that other CPU's
rcu_node structure.
This commit eliminates this false positive by adding code to the end
of rcu_cleanup_dying_idle_cpu() that reports a quiescent state to RCU,
which has the side-effect of clearing that CPU's ->qsmask bit, preventing
the above scenario. This approach has the added benefit of more promptly
reporting quiescent states corresponding to offline CPUs.
Note well that the call to rcu_report_qs_rnp() reporting the quiescent
state must come -before- the clearing of this CPU's bit in the leaf
rcu_node structure's ->qsmaskinitnext field. Otherwise, lockdep-RCU
will complain bitterly about quiescent states coming from an offline CPU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_lockdep_current_cpu_online() function currently checks only the
RCU-sched data structures to determine whether or not RCU believes that a
given CPU is offline. Unfortunately, there are multiple flavors of RCU,
which means that there is a short window of time during which the various
flavors disagree as to whether or not a given CPU is offline. This can
result in false-positive lockdep-RCU splats in which some other flavor
of RCU tries to do something based on its view that the CPU is online,
only to get hit with a lockdep-RCU splat because RCU-sched instead
believes that the CPU is offline.
This commit therefore changes rcu_lockdep_current_cpu_online() to scan
all RCU flavors and to consider a given CPU to be online if any of the
RCU flavors believe it to be online, thus preventing these false-positive
splats.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The force_qs_rnp() function checks for ->qsmask being all zero, that is,
all CPUs for the current rcu_node structure having already passed through
quiescent states. But with RCU-preempt, this is not sufficient to report
quiescent states further up the tree, so there are further checks that
can initiate RCU priority boosting and also for races with CPU-hotplug
operations. However, if neither of these further checks apply, the code
proceeds to carry out a useless scan of an all-zero ->qsmask.
This commit therefore adds code to release the current rcu_node
structure's lock and continue on to the next rcu_node structure, thereby
avoiding this useless scan.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit gets rid of the smp_wmb() in record_gp_stall_check_time()
in favor of an smp_store_release().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit fixes a typo and adds some additional debugging to the
message emitted when a task blocking the current grace period is listed
as blocking it when either that grace period ends or the next grace
period begins. This commit also reformats the console message for
readability.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
If rcu_report_unblock_qs_rnp() is invoked on something other than
preemptible RCU or if there are still preempted tasks blocking the
current grace period, something went badly wrong in the caller.
This commit therefore adds WARN_ON_ONCE() to these conditions, but
leaving the legitimate reason for early exit (rnp->qsmask != 0)
unwarned.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, rcu_init_new_rnp() walks up the rcu_node combining tree,
setting bits in the ->qsmaskinit fields on the way up. It walks up
unconditionally, regardless of the initial state of these bits. This is
OK because only the corresponding RCU grace-period kthread ever tests
or sets these bits during runtime. However, it is also pointless, and
it increases both memory and lock contention (albeit only slightly), so
this commit stops the walk as soon as an already-set bit is encountered.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Back in the old days, when grace-period initialization blocked CPU
hotplug, the ->qsmaskinit mask was indeed updated at the time that
a given CPU went offline. However, with the deferral of these updates
until the beginning of the next grace period in commit 0aa04b055e
("rcu: Process offlining and onlining only at grace-period start"),
it is instead ->qsmaskinitnext that gets updated at that time.
This commit therefore updates the obsolete comment. It also fixes
punctuation while on the topic of comments mentioning ->qsmaskinit.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Commit 0aa04b055e ("rcu: Process offlining and onlining only at
grace-period start") deferred handling of CPU-hotplug events until the
start of the next grace period, but consider the following sequence
of events:
1. A task is preempted within an RCU-preempt read-side critical
section.
2. The CPU that this task was running on goes offline, along with all
other CPUs sharing the corresponding leaf rcu_node structure.
3. The task resumes execution.
4. One of those CPUs comes back online before a new grace period starts.
In step 2, the code in the next rcu_gp_init() invocation will (correctly)
defer removing the leaf rcu_node structure from the upper-level bitmasks,
and will (correctly) set that structure's ->wait_blkd_tasks field. During
the ensuing interval, RCU will (correctly) track the tasks preempted on
that structure because they must block any subsequent grace period.
In step 3, the code in rcu_read_unlock_special() will (correctly) remove
the task from the leaf rcu_node structure. From this point forward, RCU
need not pay attention to this structure, at least not until one of the
corresponding CPUs comes back online.
In step 4, the code in the next rcu_gp_init() invocation will
(incorrectly) invoke rcu_init_new_rnp(). This is incorrect because
the corresponding rcu_cleanup_dead_rnp() was never invoked. This is
nevertheless harmless because the upper-level bits are still set.
So, no harm, no foul, right?
At least, all is well until a little further into rcu_gp_init()
invocation, which will notice that there are no longer any tasks blocked
on the leaf rcu_node structure, conclude that there is no longer anything
left over from step 2's offline operation, and will therefore invoke
rcu_cleanup_dead_rnp(). But this invocation of rcu_cleanup_dead_rnp()
is for the beginning of the earlier offline interval, and the previous
invocation of rcu_init_new_rnp() is for the end of that same interval.
That is right, they are invoked out of order.
That cannot be good, can it?
It turns out that this is not a (correctness!) problem because
rcu_cleanup_dead_rnp() checks to see if any of the corresponding CPUs
are online, and refuses to do anything if so. In other words, in the
case where rcu_init_new_rnp() and rcu_cleanup_dead_rnp() execute out of
order, they both have no effect.
But this is at best an accident waiting to happen.
This commit therefore adds logic to rcu_gp_init() so that
rcu_init_new_rnp() and rcu_cleanup_dead_rnp() are always invoked in
order, and so that neither are invoked at all in cases where RCU had to
pay attention to the leaf rcu_node structure during the entire time that
all corresponding CPUs were offline.
And, while in the area, this commit reduces confusion by using formal
parameters rather than local variables that just happen to have the same
value at that particular point in the code.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There's no need to keep checking the same starting node for whether a
grace period is in progress as we advance up the funnel lock loop. Its
sufficient if we just checked it in the start, and then subsequently
checked the internal nodes as we advanced up the combining tree. This
also makes sense because the grace-period updates propogate from the
root to the leaf, so there's a chance we may find a grace period has
started as we advance up, lets check for the same.
Reported-by: Paul McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The funnel locking loop in rcu_start_this_gp uses rcu_root as a
temporary variable while walking the combining tree. This causes a
tiresome exercise of a code reader reminding themselves that rcu_root
may not be root. Lets just call it rnp, and rename other variables as
well to be more appropriate.
Original patch: https://patchwork.kernel.org/patch/10396577/
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Fix name in comment as well. ]
The name 'c' is used for variables and parameters holding the requested
grace-period sequence number. However it is no longer very meaningful
given the conversions from ->gpnum and (especially) ->completed to
->gp_seq. This commit therefore renames 'c' to 'gp_seq_req'.
Previous patch discussion is at:
https://patchwork.kernel.org/patch/10396579/
Signed-off-by: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_data structure's ->gpwrap indicator is currently reset only
when the CPU in question detects a new grace period. This is in theory
sufficient because any CPU that has been out of action for long enough
that its ->gpwrap indicator is set is guaranteed to see both the end
of an old grace period and the start of a new one.
However, the current code leaves a short window during which the ->gpwrap
indicator has been reset but the corresponding ->gp_seq counter has not
yet been brought up to date. This is harmless because interrupts are
disabled, but it is likely to (at the very least) cause confusion.
This commit therefore moves the resetting of ->gpwrap to follow the
updating of ->gp_seq. While in the area, it also resets ->gp_seq_needed.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The new ->gq_seq grace-period sequence numbers must be shifted down,
which give artifacts when these numbers wrap. This commit therefore
enables rcutorture and rcuperf to handle grace-period sequence numbers
even if they do wrap. It does this by allowing a special subtraction
function to be specified, and this function subtracts before shifting.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In the old days of ->gpnum and ->completed, the code requesting a new
grace period checked to see if that grace period had already started,
bailing early if so. The new-age ->gp_seq approach instead checks
whether the grace period has already finished. A compensating change
pushed the requested grace period down to the bottom of the tree, thus
reducing lock contention and even eliminating it in some cases. But why
not further reduce contention, especially on large systems, by doing both,
especially given that the cost of doing both is extremely small?
This commit therefore adds a new rcu_seq_started() function that checks
whether a specified grace period has already started. It then uses
this new function in place of rcu_seq_done() in the rcu_start_this_gp()
function's funnel locking code.
Reported-by: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The "cpustart" trace event shows a stale gp_seq. This is because it uses
rdp->gp_seq, which is updated only at the end of the __note_gp_changes()
function. This commit therefore instead uses rnp->gp_seq.
An alternative fix would be to update rdp->gp_seq earlier, but this would
break RCU's detection of the beginning of a new-to-this-CPU grace period.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently Tree RCU's clean-up code emits a "CleanupMore" trace event in
response to late-arriving grace-period requests even if the grace period
was already requested. This makes "CleanupMore" show up an extra time (in
addition to once for each rcu_node structure that was previously marked
with the request), and for no good reason. This commit therefore avoids
emitting this trace message unless the the only request for this next
grace period arrived during or after the cleanup scan of the rcu_node
structures.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The old grace-period start code would acquire only the leaf's rcu_node
structure's ->lock if that structure believed that a grace period was
in progress. The new code advances to the leaf's parent in this case,
needlessly acquiring then leaf's parent's ->lock. This commit therefore
checks the grace-period state after marking the leaf with the need for
the specified grace period, and if the leaf believes that a grace period
is in progress, takes an early exit.
Reported-by: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Add "Startedleaf" tracing as suggested by Joel Fernandes. ]
Now that the rcu_data structure contains ->gp_seq_needed, create an
rcu_accelerate_cbs_unlocked() helper function that locklessly checks to
see if new callbacks' required grace period has already been requested.
If so, update the callback list locally and again locklessly. (Though
interrupts must be and are disabled to avoid racing with conflicting
updates in interrupt handlers.)
Otherwise, call rcu_accelerate_cbs() as before.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that everything has been converted to use ->gp_seq instead of
->gpnum and ->completed, this commit removes ->gpnum and ->completed.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit makes the rcu_quiescent_state_report tracepoint use ->gp_seq
instead of ->gpnum.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit makes the rcu_unlock_preempted_task tracepoint use ->gp_seq
instead of ->gpnum.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit makes the rcu_future_grace_period tracepoint use gp_seq
instead of ->gpnum and ->completed.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit makes the rcu_grace_period tracepoint use gp_seq instead
of ->gpnum or ->completed. It also introduces a "cpuofl-bgp" string to
less obscurely indicate when a CPU has gone offline while a grace period
is waiting on it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit makes rcu_nocb_wait_gp() check rdp->gp_seq_needed to see
if the current CPU already knows about the needed grace period having
already been requested. If so, it avoids acquiring the corresponding
leaf rcu_node structure's ->lock, thus decreasing contention. This
optimization is intended for cases where either multiple leader rcuo
kthreads are running on the same CPU or these kthreads are running on
a non-offloaded (e.g., housekeeping) CPU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Move lock release past "if" as suggested by Joel Fernandes. ]
[ paulmck: Fix caching of furthest-future requested grace period. ]
One problem with the ->need_future_gp[] array is that the grace-period
assignment of each element changes as the grace periods complete.
This means that it is necessary to hold a lock when checking this
array to learn if a given grace period has already been requested.
This increase lock contention, which is the opposite of helpful.
This commit therefore replaces the ->need_future_gp[] with a single
->gp_seq_needed value and keeps it updated in the rcu_data structure.
This will enable reliable lockless checking of whether or not a given
grace period has already been requested.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
SRCU has long used ->srcu_gp_seq, and now RCU uses ->gp_seq. This
commit therefore moves the rcutorture_get_gp_data() function from
a ->gpnum / ->completed pair to ->gp_seq.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit makes the RCU CPU stall-warning code in print_other_cpu_stall(),
print_cpu_stall(), and check_cpu_stall() use ->gp_seq instead of ->gpnum
and ->completed.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit converts the grace-period request code paths from ->completed
and ->gpnum to ->gp_seq. The need_future_gp_element() macro encapsulates
the shift operation required to use ->gp_seq as an index to the
->need_future_gp[] array. The rcu_cbs_completed() function is removed
in favor of the rcu_seq_snap() function. The rcu_start_this_gp()
gets some temporary consistency checks and uses rcu_seq_done(),
rcu_seq_current(), rcu_seq_state(), and rcu_gp_in_progress() in place
of the earlier open-coded comparisons of ->gpnum and ->completed.
The rcu_future_gp_cleanup() function replaces use of ->completed
with ->gp_seq. The rcu_accelerate_cbs() function replaces a call to
rcu_cbs_completed() with one to rcu_seq_snap(). The rcu_advance_cbs()
function replaces an access to >completed with one to ->gp_seq and adds
some temporary warnings. The rcu_nocb_wait_gp() function replaces a
call to rcu_cbs_completed() with one to rcu_seq_snap() and an open-coded
comparison with rcu_seq_done().
The temporary warnings will be removed when the various ->gpnum and
->completed fields are removed. Their purpose is to locate code who
might still be using ->gpnum and ->completed. (Much easier that way
than trying to trace down the causes of too-short grace periods and
grace-period hangs!)
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit switches the quiescent-state no-backtracking checks from
->gpnum and ->completed to ->gp_seq.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit switches the interrupt-disabled detection mechanism to
->gp_seq. This mechanism is used as part of RCU CPU stall warnings,
and detects cases where the stall is due to a CPU having interrupts
disabled.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit makes rcu_gp_in_progress() use ->gp_seq instead of
->completed and ->gpnum. The READ_ONCE() invocations are buried
in rcu_seq_current().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit makes rcu_try_advance_all_cbs() use ->gp_seq. It uses
rcu_seq_ctr() in order to shift away the state bits, so that the
low-order bits of the result may safely be used to index ->nocb_gp_wq[].
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit makes rcu_try_advance_all_cbs() use ->gp_seq, with the
exception of tracing, which will be converted later.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit makes rcu_implicit_dynticks_qs() use ->gp_seq, with the
exception of tracing, which will be converted later.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit converts rcu_gpnum_ovf() to use ->gp_seq instead of ->gpnum.
Same size unsigned long, so same approach.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit moves __note_gp_changes(), note_gp_changes(), and
__rcu_pending() to ->gp_seq, creating new rcu_seq_completed_gp() and
rcu_seq_new_gp() functions for this purpose.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Reinstate "cpuend: trace as suggested by Joel Fernandes. ]
This commit converts get_state_synchronize_rcu(), cond_synchronize_rcu(),
get_state_synchronize_sched(), and cond_synchronize_sched() from ->gpnum
and ->completed to ->gp_seq. Note that this also introduces a full
memory barrier in the already-done paths off cond_synchronize_rcu() and
cond_synchronize_sched(), as work with LKMM indicates that the earlier
smp_load_acquire() were insufficiently strong in some situations where
these two functions were called just as the grace period ended. In such
cases, these two functions would not gain the benefit of memory ordering
at the end of the grace period.
Please note that the performance impact is negligible, as you shouldn't
be using either function anywhere near a fastpath in any case.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit switches the functions reporting quiescent states from
use of ->gpnum to ->gp_seq. In either case, the point is to handle
races where a given grace period ends before a quiescent state can
be reported. Failing to catch these races would result in too-short
grace periods, hence the checking.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit switches rcu_check_gp_kthread_starvation() from printing
->gpnum and ->completed to printing ->gp_seq upon detecting a starving
RCU grace-period kthread during an RCU CPU stall warning.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcutorture test invokes rcu_batches_started(),
rcu_batches_completed(), rcu_batches_started_bh(),
rcu_batches_completed_bh(), rcu_batches_started_sched(), and
rcu_batches_completed_sched() to do grace-period consistency checks,
and rcuperf uses the _completed variants for statistics.
These functions use ->gpnum and ->completed. This commit therefore
replaces them with rcu_get_gp_seq(), rcu_bh_get_gp_seq(), and
rcu_sched_get_gp_seq(), adjusting rcutorture and rcuperf to make
use of them.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit moves rcu_gp_slow() to ->gp_seq. This function only uses
the grace-period number to modulate delay, so rcu_seq_ctr(rsp->gp_seq)
gets the same effect, at least in cases where the delay is to happen
more than four times per wrap of an unsigned long.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds grace-period sequence numbers (->gp_seq) to the
rcu_state, rcu_node, and rcu_data structures, and updates them.
It also checks for consistency between rsp->gpnum and rsp->gp_seq.
These ->gp_seq counters will eventually replace the existing ->gpnum
and ->completed counters, allowing a single memory access to determine
whether or not a grace period is in progress and if so, which one.
This in turn will enable changes that will reduce ->lock contention on
the leaf rcu_node structures.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
At the end of rcu_gp_cleanup(), if another grace period is needed, but
not via rcu_accelerate_cbs(), the ->gp_flags field is written twice,
once when making the new grace-period request, and once when clearing
all other types of requests. This commit therefore adds an else-clause
to avoid this double write.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit causes a splat if RCU is idle and a request for a new grace
period is ignored for more than one second. This splat normally indicates
that some code path asked for a new grace period, but failed to wake up
the RCU grace-period kthread.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Fix bug located by Dan Carpenter and his static checker. ]
[ paulmck: Fix self-deadlock bug located 0day test robot. ]
[ paulmck: Disable unless CONFIG_PROVE_RCU=y. ]
syzkaller managed to trigger the following bug through fault injection:
[...]
[ 141.043668] verifier bug. No program starts at insn 3
[ 141.044648] WARNING: CPU: 3 PID: 4072 at kernel/bpf/verifier.c:1613
get_callee_stack_depth kernel/bpf/verifier.c:1612 [inline]
[ 141.044648] WARNING: CPU: 3 PID: 4072 at kernel/bpf/verifier.c:1613
fixup_call_args kernel/bpf/verifier.c:5587 [inline]
[ 141.044648] WARNING: CPU: 3 PID: 4072 at kernel/bpf/verifier.c:1613
bpf_check+0x525e/0x5e60 kernel/bpf/verifier.c:5952
[ 141.047355] CPU: 3 PID: 4072 Comm: a.out Not tainted 4.18.0-rc4+ #51
[ 141.048446] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),BIOS 1.10.2-1 04/01/2014
[ 141.049877] Call Trace:
[ 141.050324] __dump_stack lib/dump_stack.c:77 [inline]
[ 141.050324] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113
[ 141.050950] ? dump_stack_print_info.cold.2+0x52/0x52 lib/dump_stack.c:60
[ 141.051837] panic+0x238/0x4e7 kernel/panic.c:184
[ 141.052386] ? add_taint.cold.5+0x16/0x16 kernel/panic.c:385
[ 141.053101] ? __warn.cold.8+0x148/0x1ba kernel/panic.c:537
[ 141.053814] ? __warn.cold.8+0x117/0x1ba kernel/panic.c:530
[ 141.054506] ? get_callee_stack_depth kernel/bpf/verifier.c:1612 [inline]
[ 141.054506] ? fixup_call_args kernel/bpf/verifier.c:5587 [inline]
[ 141.054506] ? bpf_check+0x525e/0x5e60 kernel/bpf/verifier.c:5952
[ 141.055163] __warn.cold.8+0x163/0x1ba kernel/panic.c:538
[ 141.055820] ? get_callee_stack_depth kernel/bpf/verifier.c:1612 [inline]
[ 141.055820] ? fixup_call_args kernel/bpf/verifier.c:5587 [inline]
[ 141.055820] ? bpf_check+0x525e/0x5e60 kernel/bpf/verifier.c:5952
[...]
What happens in jit_subprogs() is that kcalloc() for the subprog func
buffer is failing with NULL where we then bail out. Latter is a plain
return -ENOMEM, and this is definitely not okay since earlier in the
loop we are walking all subprogs and temporarily rewrite insn->off to
remember the subprog id as well as insn->imm to temporarily point the
call to __bpf_call_base + 1 for the initial JIT pass. Thus, bailing
out in such state and handing this over to the interpreter is troublesome
since later/subsequent e.g. find_subprog() lookups are based on wrong
insn->imm.
Therefore, once we hit this point, we need to jump to out_free path
where we undo all changes from earlier loop, so that interpreter can
work on unmodified insn->{off,imm}.
Another point is that should find_subprog() fail in jit_subprogs() due
to a verifier bug, then we also should not simply defer the program to
the interpreter since also here we did partial modifications. Instead
we should just bail out entirely and return an error to the user who is
trying to load the program.
Fixes: 1c2a088a66 ("bpf: x64: add JIT support for multi-function programs")
Reported-by: syzbot+7d427828b2ea6e592804@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull timekeeping updates from John Stultz:
- Make the timekeeping update more precise when NTP frequency is set
directly by updating the multiplier.
- Adjust selftests
Currently, the parallelized initialization of expedited grace periods uses
the workqueue associated with each rcu_node structure's ->grplo field.
This works fine unless that CPU is offline. This commit therefore uses
the CPU corresponding to the lowest-numbered online CPU, or just queues
the work on WORK_CPU_UNBOUND if there are no online CPUs corresponding
to this rcu_node structure.
Note that this patch uses cpu_is_offline() instead of the usual approach
of checking bits in the rcu_node structure's ->qsmaskinitnext field. This
is safe because preemption is disabled across both the cpu_is_offline()
check and the call to queue_work_on().
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
[ paulmck: Disable preemption to close offline race window. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Apply Peter Zijlstra feedback on CPU selection. ]
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
- Join split message for easier grepping,
- Use pr_*() instead of printk*(),
- Use %u to format unsigned cpu numbers.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20180712144118.8819-1-geert+renesas@glider.be
When extracting bitfield from a number, btf_int_bits_seq_show() builds
a mask and accesses least significant byte of the number in a way
specific to little-endian. This patch fixes that by checking endianness
of the machine and then shifting left and right the unneeded bits.
Thanks to Martin Lau for the help in navigating potential pitfalls when
dealing with endianess and for the final solution.
Fixes: b00b8daec8 ("bpf: btf: Add pretty print capability for data with BTF type info")
Signed-off-by: Okash Khawaja <osk@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW0ZhphQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlxwAP4jKOp86ljtdqHSlh9mOHChnvwdMprQ
kaQ82WiamGikIwD/Vo/6ynsVl5eYMDO2VQSv6W1DHmhV9I/KgdqcQBl8jAk=
=RF9o
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.18-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull kprobe fix from Steven Rostedt:
"This fixes a memory leak in the kprobe code"
* tag 'trace-v4.18-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/kprobe: Release kprobe print_fmt properly
We don't release tk->tp.call.print_fmt when destroying
local uprobe. Also there's missing print_fmt kfree in
create_local_trace_kprobe error path.
Link: http://lkml.kernel.org/r/20180709141906.2390-1-jolsa@kernel.org
Cc: stable@vger.kernel.org
Fixes: e12f03d703 ("perf/core: Implement the 'perf_kprobe' PMU")
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
It is unwise to take spin locks from the handlers of trace events.
Mainly, because they can introduce lockups, because it introduces locks
in places that are normally not tested. Worse yet, because trace events
are tucked away in the include/trace/events/ directory, locks that are
taken there are forgotten about.
As a general rule, I tell people never to take any locks in a trace
event handler.
Several cgroup trace event handlers call cgroup_path() which eventually
takes the kernfs_rename_lock spinlock. This injects the spinlock in the
code without people realizing it. It also can cause issues for the
PREEMPT_RT patch, as the spinlock becomes a mutex, and the trace event
handlers are called with preemption disabled.
By moving the calculation of the cgroup_path() out of the trace event
handlers and into a macro (surrounded by a
trace_cgroup_##type##_enabled()), then we could place the cgroup_path
into a string, and pass that to the trace event. Not only does this
remove the taking of the spinlock out of the trace event handler, but
it also means that the cgroup_path() only needs to be called once (it
is currently called twice, once to get the length to reserver the
buffer for, and once again to get the path itself. Now it only needs to
be done once.
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
suppress_message_printing() is not longer called in console_unlock().
Therefore it is not longer needed with disabled CONFIG_PRINTK.
This fixes the warning:
kernel/printk/printk.c:2033:13: warning: ‘suppress_message_printing’ defined but not used [-Wunused-function]
static bool suppress_message_printing(int level) { return false; }
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Maninder Singh <maninder1.s@samsung.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Declaring the rseq_cs field as a union between __u64 and two __u32
allows both 32-bit and 64-bit kernels to read the full __u64, and
therefore validate that a 32-bit user-space cleared the upper 32
bits, thus ensuring a consistent behavior between native 32-bit
kernels and 32-bit compat tasks on 64-bit kernels.
Check that the rseq_cs value read is < TASK_SIZE.
The asm/byteorder.h header needs to be included by rseq.h, now
that it is not using linux/types_32_64.h anymore.
Considering that only __32 and __u64 types are declared in linux/rseq.h,
the linux/types.h header should always be included for both kernel and
user-space code: including stdint.h is just for u64 and u32, which are
not used in this header at all.
Use copy_from_user()/clear_user() to interact with a 64-bit field,
because arm32 does not implement 64-bit __get_user, and ppc32 does not
64-bit get_user. Considering that the rseq_cs pointer does not need to
be loaded/stored with single-copy atomicity from the kernel anymore, we
can simply use copy_from_user()/clear_user().
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-api@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Watson <davejwatson@fb.com>
Cc: Paul Turner <pjt@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Chris Lameter <cl@linux.com>
Cc: Ben Maurer <bmaurer@fb.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180709195155.7654-5-mathieu.desnoyers@efficios.com
Update rseq uapi header comments to reflect that user-space need to do
thread-local loads/stores from/to the struct rseq fields.
As a consequence of this added requirement, the kernel does not need
to perform loads/stores with single-copy atomicity.
Update the comment associated to the "flags" fields to describe
more accurately that it's only useful to facilitate single-stepping
through rseq critical sections with debuggers.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-api@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Watson <davejwatson@fb.com>
Cc: Paul Turner <pjt@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Chris Lameter <cl@linux.com>
Cc: Ben Maurer <bmaurer@fb.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180709195155.7654-4-mathieu.desnoyers@efficios.com
__get_user()/__put_user() is used to read values for address ranges that
were already checked with access_ok() on rseq registration.
It has been recognized that __get_user/__put_user are optimizing the
wrong thing. Replace them by get_user/put_user across rseq instead.
If those end up showing up in benchmarks, the proper approach would be to
use user_access_begin() / unsafe_{get,put}_user() / user_access_end()
anyway.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-api@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Watson <davejwatson@fb.com>
Cc: Paul Turner <pjt@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Chris Lameter <cl@linux.com>
Cc: Ben Maurer <bmaurer@fb.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lkml.kernel.org/r/20180709195155.7654-3-mathieu.desnoyers@efficios.com
Change the rseq ABI so rseq_cs start_ip, post_commit_offset and abort_ip
fields are seen as 64-bit fields by both 32-bit and 64-bit kernels rather
that ignoring the 32 upper bits on 32-bit kernels. This ensures we have a
consistent behavior for a 32-bit binary executed on 32-bit kernels and in
compat mode on 64-bit kernels.
Validating the value of abort_ip field to be below TASK_SIZE ensures the
kernel don't return to an invalid address when returning to userspace
after an abort. I don't fully trust each architecture code to consistently
deal with invalid return addresses.
Validating the value of the start_ip and post_commit_offset fields
prevents overflow on arithmetic performed on those values, used to
check whether abort_ip is within the rseq critical section.
If validation fails, the process is killed with a segmentation fault.
When the signature encountered before abort_ip does not match the expected
signature, return -EINVAL rather than -EPERM to be consistent with other
input validation return codes from rseq_get_rseq_cs().
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-api@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Watson <davejwatson@fb.com>
Cc: Paul Turner <pjt@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Chris Lameter <cl@linux.com>
Cc: Ben Maurer <bmaurer@fb.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180709195155.7654-2-mathieu.desnoyers@efficios.com
This reverts commit 1332a90558.
The original issue was not because of incorrect checking of cpumask for
both new and old tick device. It was incorrectly analysed was due to the
misunderstanding of the comment and misinterpretation of the return value
from tick_check_preferred. The main issue is with the clockevent driver
that sets the cpumask to cpu_all_mask instead of cpu_possible_mask.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/1531151136-18297-1-git-send-email-sudeep.holla@arm.com
When the NTP frequency is set directly from userspace using the
ADJ_FREQUENCY or ADJ_TICK timex mode, immediately update the
timekeeper's multiplier instead of waiting for the next tick.
This removes a hidden non-deterministic delay in setting of the
frequency and allows an extremely tight control of the system clock
with update rates close to or even exceeding the kernel HZ.
The update is limited to archs using modern timekeeping
(!ARCH_USES_GETTIMEOFFSET).
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Since @blk_debugfs_root couldn't be configured dynamically, we can
save a few memory allocation if it's not there.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The commit 719f6a7040 ("printk: Use the main logbuf in NMI
when logbuf_lock is available") brought back the possible deadlocks
in printk() and NMI.
The check of logbuf_lock is done only in printk_nmi_enter() to prevent
mixed output. But another CPU might take the lock later, enter NMI, and:
+ Both NMIs might be serialized by yet another lock, for example,
the one in nmi_cpu_backtrace().
+ The other CPU might get stopped in NMI, see smp_send_stop()
in panic().
The only safe solution is to use trylock when storing the message
into the main log-buffer. It might cause reordering when some lines
go to the main lock buffer directly and others are delayed via
the per-CPU buffer. It means that it is not useful in general.
This patch replaces the problematic NMI deferred context with NMI
direct context. It can be used to mark a code that might produce
many messages in NMI and the risk of losing them is more critical
than problems with eventual reordering.
The context is then used when dumping trace buffers on oops. It was
the primary motivation for the original fix. Also the reordering is
even smaller issue there because some traces have their own time stamps.
Finally, nmi_cpu_backtrace() need not longer be serialized because
it will always us the per-CPU buffers again.
Fixes: 719f6a7040 ("printk: Use the main logbuf in NMI when logbuf_lock is available")
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20180627142028.11259-1-pmladek@suse.com
To: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
It is just a preparation step. The patch does not change
the existing behavior.
Link: http://lkml.kernel.org/r/20180627140817.27764-3-pmladek@suse.com
To: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
It is just a preparation step. The patch does not change
the existing behavior.
Link: http://lkml.kernel.org/r/20180627140817.27764-2-pmladek@suse.com
To: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Writing 'off' to /sys/devices/system/cpu/smt/control offlines all SMT
siblings. Writing 'on' merily enables the abilify to online them, but does
not online them automatically.
Make 'on' more useful by onlining all offline siblings.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull scheduler fixes from Thomas Gleixner:
- The hopefully final fix for the reported race problems in
kthread_parkme(). The previous attempt still left a hole and was
partially wrong.
- Plug a race in the remote tick mechanism which triggers a warning
about updates not being done correctly. That's a false positive if
the race condition is hit as the remote CPU is idle. Plug it by
checking the condition again when holding run queue lock.
- Fix a bug in the utilization estimation of a run queue which causes
the estimation to be 0 when a run queue is throttled.
- Advance the global expiration of the period timer when the timer is
restarted after a idle period. Otherwise the expiry time is stale and
the timer fires prematurely.
- Cure the drift between the bandwidth timer and the runqueue
accounting, which leads to bogus throttling of runqueues
- Place the call to cpufreq_update_util() correctly so the function
will observe the correct number of running RT tasks and not a stale
one.
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kthread, sched/core: Fix kthread_parkme() (again...)
sched/util_est: Fix util_est_dequeue() for throttled cfs_rq
sched/fair: Advance global expiration when period timer is restarted
sched/fair: Fix bandwidth timer clock drift condition
sched/rt: Fix call to cpufreq_update_util()
sched/nohz: Skip remote tick on idle task entirely
Otherwise we end up with attempting to send packets from down devices
or to send oversized packets, which may cause unexpected driver/device
behaviour. Generic XDP has already done this check, so reuse the logic
in native XDP.
Fixes: 814abfabef ("xdp: add bpf_redirect helper function")
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In commit
'bpf: bpf_compute_data uses incorrect cb structure' (8108a77515)
we added the routine bpf_compute_data_end_sk_skb() to compute the
correct data_end values, but this has since been lost. In kernel
v4.14 this was correct and the above patch was applied in it
entirety. Then when v4.14 was merged into v4.15-rc1 net-next tree
we lost the piece that renamed bpf_compute_data_pointers to the
new function bpf_compute_data_end_sk_skb. This was done here,
e1ea2f9856 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net")
When it conflicted with the following rename patch,
6aaae2b6c4 ("bpf: rename bpf_compute_data_end into bpf_compute_data_pointers")
Finally, after a refactor I thought even the function
bpf_compute_data_end_sk_skb() was no longer needed and it was
erroneously removed.
However, we never reverted the sk_skb_convert_ctx_access() usage of
tcp_skb_cb which had been committed and survived the merge conflict.
Here we fix this by adding back the helper and *_data_end_sk_skb()
usage. Using the bpf_skc_data_end mapping is not correct because it
expects a qdisc_skb_cb object but at the sock layer this is not the
case. Even though it happens to work here because we don't overwrite
any data in-use at the socket layer and the cb structure is cleared
later this has potential to create some subtle issues. But, even
more concretely the filter.c access check uses tcp_skb_cb.
And by some act of chance though,
struct bpf_skb_data_end {
struct qdisc_skb_cb qdisc_cb; /* 0 28 */
/* XXX 4 bytes hole, try to pack */
void * data_meta; /* 32 8 */
void * data_end; /* 40 8 */
/* size: 48, cachelines: 1, members: 3 */
/* sum members: 44, holes: 1, sum holes: 4 */
/* last cacheline: 48 bytes */
};
and then tcp_skb_cb,
struct tcp_skb_cb {
[...]
struct {
__u32 flags; /* 24 4 */
struct sock * sk_redir; /* 32 8 */
void * data_end; /* 40 8 */
} bpf; /* 24 */
};
So when we use offset_of() to track down the byte offset we get 40 in
either case and everything continues to work. Fix this mess and use
correct structures its unclear how long this might actually work for
until someone moves the structs around.
Reported-by: Martin KaFai Lau <kafai@fb.com>
Fixes: e1ea2f9856 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net")
Fixes: 6aaae2b6c4 ("bpf: rename bpf_compute_data_end into bpf_compute_data_pointers")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, when a sock is closed and the bpf_tcp_close() callback is
used we remove memory but do not free the skb. Call consume_skb() if
the skb is attached to the buffer.
Reported-by: syzbot+d464d2c20c717ef5a6a8@syzkaller.appspotmail.com
Fixes: 1aa12bdf1b ("bpf: sockmap, add sock close() hook to remove socks")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After latest lock updates there is no longer anything preventing a
close and recvmsg call running in parallel. Additionally, we can
race update with close if we close a socket and simultaneously update
if via the BPF userspace API (note the cgroup ops are already run
with sock_lock held).
To resolve this take sock_lock in close and update paths.
Reported-by: syzbot+b680e42077a0d7c9a0c4@syzkaller.appspotmail.com
Fixes: e9db4ef6bf ("bpf: sockhash fix omitted bucket lock in sock_close")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This removes locking from readers of RCU hash table. Its not
necessary.
Fixes: 8111038444 ("bpf: sockmap, add hash map support")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The current code, in the error path of sock_hash_ctx_update_elem,
checks if the sock has a psock in the user data and if so decrements
the reference count of the psock. However, if the error happens early
in the error path we may have never incremented the psock reference
count and if the psock exists because the sock is in another map then
we may inadvertently decrement the reference count.
Fix this by making the error path only call smap_release_sock if the
error happens after the increment.
Reported-by: syzbot+d464d2c20c717ef5a6a8@syzkaller.appspotmail.com
Fixes: 8111038444 ("bpf: sockmap, add hash map support")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
in the noise. These are minor bug fixes and clean ups. Those include:
- Avoiding a string overflow
- Code that didn't match the comment (but should)
- A small code optimization (use of a conditional)
- Quieting printf warnings
- Nuking unused code
- Fixing function graph interrupt annotation
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWz7ARhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmMqAQDTS7uvFLRR603WXyOazX6Y7FeiYFWp
MUUZjnbG9u0bawEAulW53AM0OL3EAAaZKtPi8VtsT+uktR1GIynXrp+yoww=
=yQDv
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes and cleanups from Steven Rostedt:
"While cleaning out my INBOX, I found a few patches that were lost in
the noise. These are minor bug fixes and clean ups. Those include:
- avoid a string overflow
- code that didn't match the comment (but should)
- a small code optimization (use of a conditional)
- quiet printf warnings
- nuke unused code
- fix function graph interrupt annotation"
* tag 'trace-v4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix missing return symbol in function_graph output
ftrace: Nuke clear_ftrace_function
tracing: Use __printf markup to silence compiler
tracing: Optimize trace_buffer_iter() logic
tracing: Make create_filter() code match the comments
tracing: Avoid string overflow
A patchset worked out together with Peter Zijlstra. Ingo is OK with taking
it through the DRM tree:
This is a small fallout from a work to allow batching WW mutex locks and
unlocks.
Our Wound-Wait mutexes actually don't use the Wound-Wait algorithm but
the Wait-Die algorithm. One could perhaps rename those mutexes tree-wide to
"Wait-Die mutexes" or "Deadlock Avoidance mutexes". Another approach suggested
here is to implement also the "Wound-Wait" algorithm as a per-WW-class
choice, as it has advantages in some cases. See for example
http://www.mathcs.emory.edu/~cheung/Courses/554/Syllabus/8-recv+serial/deadlock-compare.html
Now Wound-Wait is a preemptive algorithm, and the preemption is implemented
using a lazy scheme: If a wounded transaction is about to go to sleep on
a contended WW mutex, we return -EDEADLK. That is sufficient for deadlock
prevention. Since with WW mutexes we also require the aborted transaction to
sleep waiting to lock the WW mutex it was aborted on, this choice also provides
a suitable WW mutex to sleep on. If we were to return -EDEADLK on the first
WW mutex lock after the transaction was wounded whether the WW mutex was
contended or not, the transaction might frequently be restarted without a wait,
which is far from optimal. Note also that with the lazy preemption scheme,
contrary to Wait-Die there will be no rollbacks on lock contention of locks
held by a transaction that has completed its locking sequence.
The modeset locks are then changed from Wait-Die to Wound-Wait since the
typical locking pattern of those locks very well matches the criterion for
a substantial reduction in the number of rollbacks. For reservation objects,
the benefit is more unclear at this point and they remain using Wait-Die.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703105339.4461-1-thellstrom@vmware.com
If the L1TF CPU bug is present we allow the KVM module to be loaded as the
major of users that use Linux and KVM have trusted guests and do not want a
broken setup.
Cloud vendors are the ones that are uncomfortable with CVE 2018-3620 and as
such they are the ones that should set nosmt to one.
Setting 'nosmt' means that the system administrator also needs to disable
SMT (Hyper-threading) in the BIOS, or via the 'nosmt' command line
parameter, or via the /sys/devices/system/cpu/smt/control. See commit
05736e4ac1 ("cpu/hotplug: Provide knobs to control SMT").
Other mitigations are to use task affinity, cpu sets, interrupt binding,
etc - anything to make sure that _only_ the same guests vCPUs are running
on sibling threads.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
clear_ftrace_function is not used outside of ftrace.c and is not help to
use a function, so nuke it per Steve's suggestion.
Link: http://lkml.kernel.org/r/1517537689-34947-1-git-send-email-xieyisheng1@huawei.com
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Silence warnings (triggered at W=1) by adding relevant __printf attributes.
CC kernel/trace/trace.o
kernel/trace/trace.c: In function ‘__trace_array_vprintk’:
kernel/trace/trace.c:2979:2: warning: function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
len = vscnprintf(tbuffer, TRACE_BUF_SIZE, fmt, args);
^~~
AR kernel/trace/built-in.o
Link: http://lkml.kernel.org/r/20180308205843.27447-1-malat@debian.org
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Simplify and optimize the logic in trace_buffer_iter() to use a conditional
operation instead of an if conditional.
Link: http://lkml.kernel.org/r/20180408113631.3947-1-cugyly@163.com
Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The comment in create_filter() states that the passed in filter pointer
(filterp) will either be NULL or contain an error message stating why the
filter failed. But it also expects the filter pointer to point to NULL when
passed in. If it is not, the function create_filter_start() will warn and
return an error message without updating the filter pointer. This is not
what the comment states.
As we always expect the pointer to point to NULL, if it is not, trigger a
WARN_ON(), set it to NULL, and then continue the path as the rest will work
as the comment states. Also update the comment to state it must point to
NULL.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
'err' is used as a NUL-terminated string, but using strncpy() with the length
equal to the buffer size may result in lack of the termination:
kernel/trace/trace_events_hist.c: In function 'hist_err_event':
kernel/trace/trace_events_hist.c:396:3: error: 'strncpy' specified bound 256 equals destination size [-Werror=stringop-truncation]
strncpy(err, var, MAX_FILTER_STR_VAL);
This changes it to use the safer strscpy() instead.
Link: http://lkml.kernel.org/r/20180328140920.2842153-1-arnd@arndb.de
Cc: stable@vger.kernel.org
Fixes: f404da6e1d ("tracing: Add 'last error' error facility for hist triggers")
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Decrement the number of elements in the map in case the allocation
of a new node fails.
Fixes: 6c90598174 ("bpf: pre-allocate hash map elements")
Signed-off-by: Mauricio Vasquez B <mauricio.vasquez@polito.it>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The API got renamed for consistency with the other time accessors,
this changes the audit caller as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The current Wound-Wait mutex algorithm is actually not Wound-Wait but
Wait-Die. Implement also Wound-Wait as a per-ww-class choice. Wound-Wait
is, contrary to Wait-Die a preemptive algorithm and is known to generate
fewer backoffs. Testing reveals that this is true if the
number of simultaneous contending transactions is small.
As the number of simultaneous contending threads increases, Wait-Wound
becomes inferior to Wait-Die in terms of elapsed time.
Possibly due to the larger number of held locks of sleeping transactions.
Update documentation and callers.
Timings using git://people.freedesktop.org/~thomash/ww_mutex_test
tag patch-18-06-15
Each thread runs 100000 batches of lock / unlock 800 ww mutexes randomly
chosen out of 100000. Four core Intel x86_64:
Algorithm #threads Rollbacks time
Wound-Wait 4 ~100 ~17s.
Wait-Die 4 ~150000 ~19s.
Wound-Wait 16 ~360000 ~109s.
Wait-Die 16 ~450000 ~82s.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Co-authored-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Make the WW mutex code more readable by adding comments, splitting up
functions and pointing out that we're actually using the Wait-Die
algorithm.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Co-authored-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Oleg explains the reason we could hit park+park is that
smpboot_update_cpumask_percpu_thread()'s
for_each_cpu_and(cpu, &tmp, cpu_online_mask)
smpboot_park_kthread();
turns into:
for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask, (void)and)
smpboot_park_kthread();
on UP, ignoring the mask. But since we just completely removed that
function, this is no longer relevant.
So revert commit:
b1f5b378e1 ("kthread: Allow kthread_park() on a parked kthread")
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that the sole use of the whole smpboot_*cpumask() API is gone,
remove it.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Oleg suggested to replace the "watchdog/%u" threads with
cpu_stop_work. That removes one thread per CPU while at the same time
fixes softlockup vs SCHED_DEADLINE.
But more importantly, it does away with the single
smpboot_update_cpumask_percpu_thread() user, which allows
cleanups/shrinkage of the smpboot interface.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Gaurav reports that commit:
85f1abe001 ("kthread, sched/wait: Fix kthread_parkme() completion issue")
isn't working for him. Because of the following race:
> controller Thread CPUHP Thread
> takedown_cpu
> kthread_park
> kthread_parkme
> Set KTHREAD_SHOULD_PARK
> smpboot_thread_fn
> set Task interruptible
>
>
> wake_up_process
> if (!(p->state & state))
> goto out;
>
> Kthread_parkme
> SET TASK_PARKED
> schedule
> raw_spin_lock(&rq->lock)
> ttwu_remote
> waiting for __task_rq_lock
> context_switch
>
> finish_lock_switch
>
>
>
> Case TASK_PARKED
> kthread_park_complete
>
>
> SET Running
Furthermore, Oleg noticed that the whole scheduler TASK_PARKED
handling is buggered because the TASK_DEAD thing is done with
preemption disabled, the current code can still complete early on
preemption :/
So basically revert that earlier fix and go with a variant of the
alternative mentioned in the commit. Promote TASK_PARKED to special
state to avoid the store-store issue on task->state leading to the
WARN in kthread_unpark() -> __kthread_bind().
But in addition, add wait_task_inactive() to kthread_park() to ensure
the task really is PARKED when we return from kthread_park(). This
avoids the whole kthread still gets migrated nonsense -- although it
would be really good to get this done differently.
Reported-by: Gaurav Kohli <gkohli@codeaurora.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 85f1abe001 ("kthread, sched/wait: Fix kthread_parkme() completion issue")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When a cfs_rq is throttled, parent cfs_rq->nr_running is decreased and
everything happens at cfs_rq level. Currently util_est stays unchanged
in such case and it keeps accounting the utilization of throttled tasks.
This can somewhat make sense as we don't dequeue tasks but only throttled
cfs_rq.
If a task of another group is enqueued/dequeued and root cfs_rq becomes
idle during the dequeue, util_est will be cleared whereas it was
accounting util_est of throttled tasks before. So the behavior of util_est
is not always the same regarding throttled tasks and depends of side
activity. Furthermore, util_est will not be updated when the cfs_rq is
unthrottled as everything happens at cfs_rq level. Main results is that
util_est will stay null whereas we now have running tasks. We have to wait
for the next dequeue/enqueue of the previously throttled tasks to get an
up to date util_est.
Remove the assumption that cfs_rq's estimated utilization of a CPU is 0
if there is no running task so the util_est of a task remains until the
latter is dequeued even if its cfs_rq has been throttled.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 7f65ea42eb ("sched/fair: Add util_est on top of PELT")
Link: http://lkml.kernel.org/r/1528972380-16268-1-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When period gets restarted after some idle time, start_cfs_bandwidth()
doesn't update the expiration information, expire_cfs_rq_runtime() will
see cfs_rq->runtime_expires smaller than rq clock and go to the clock
drift logic, wasting needless CPU cycles on the scheduler hot path.
Update the global expiration in start_cfs_bandwidth() to avoid frequent
expire_cfs_rq_runtime() calls once a new period begins.
Signed-off-by: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180620101834.24455-2-xlpang@linux.alibaba.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I noticed that cgroup task groups constantly get throttled even
if they have low CPU usage, this causes some jitters on the response
time to some of our business containers when enabling CPU quotas.
It's very simple to reproduce:
mkdir /sys/fs/cgroup/cpu/test
cd /sys/fs/cgroup/cpu/test
echo 100000 > cpu.cfs_quota_us
echo $$ > tasks
then repeat:
cat cpu.stat | grep nr_throttled # nr_throttled will increase steadily
After some analysis, we found that cfs_rq::runtime_remaining will
be cleared by expire_cfs_rq_runtime() due to two equal but stale
"cfs_{b|q}->runtime_expires" after period timer is re-armed.
The current condition to judge clock drift in expire_cfs_rq_runtime()
is wrong, the two runtime_expires are actually the same when clock
drift happens, so this condtion can never hit. The orginal design was
correctly done by this commit:
a9cf55b286 ("sched: Expire invalid runtime")
... but was changed to be the current implementation due to its locking bug.
This patch introduces another way, it adds a new field in both structures
cfs_rq and cfs_bandwidth to record the expiration update sequence, and
uses them to figure out if clock drift happens (true if they are equal).
Signed-off-by: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 51f2176d74 ("sched/fair: Fix unlocked reads of some cfs_b->quota/period")
Link: http://lkml.kernel.org/r/20180620101834.24455-1-xlpang@linux.alibaba.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With commit:
8f111bc357 ("cpufreq/schedutil: Rewrite CPUFREQ_RT support")
the schedutil governor uses rq->rt.rt_nr_running to detect whether an
RT task is currently running on the CPU and to set frequency to max
if necessary.
cpufreq_update_util() is called in enqueue/dequeue_top_rt_rq() but
rq->rt.rt_nr_running has not been updated yet when dequeue_top_rt_rq() is
called so schedutil still considers that an RT task is running when the
last task is dequeued. The update of rq->rt.rt_nr_running happens later
in dequeue_rt_stack().
In fact, we can take advantage of the sequence that the dequeue then
re-enqueue rt entities when a rt task is enqueued or dequeued;
As a result enqueue_top_rt_rq() is always called when a task is
enqueued or dequeued and also when groups are throttled or unthrottled.
The only place that not use enqueue_top_rt_rq() is when root rt_rq is
throttled.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: efault@gmx.de
Cc: juri.lelli@redhat.com
Cc: patrick.bellasi@arm.com
Cc: viresh.kumar@linaro.org
Fixes: 8f111bc357 ('cpufreq/schedutil: Rewrite CPUFREQ_RT support')
Link: http://lkml.kernel.org/r/1530021202-21695-1-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Some people have reported that the warning in sched_tick_remote()
occasionally triggers, especially in favour of some RCU-Torture
pressure:
WARNING: CPU: 11 PID: 906 at kernel/sched/core.c:3138 sched_tick_remote+0xb6/0xc0
Modules linked in:
CPU: 11 PID: 906 Comm: kworker/u32:3 Not tainted 4.18.0-rc2+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
Workqueue: events_unbound sched_tick_remote
RIP: 0010:sched_tick_remote+0xb6/0xc0
Code: e8 0f 06 b8 00 c6 03 00 fb eb 9d 8b 43 04 85 c0 75 8d 48 8b 83 e0 0a 00 00 48 85 c0 75 81 eb 88 48 89 df e8 bc fe ff ff eb aa <0f> 0b eb
+c5 66 0f 1f 44 00 00 bf 17 00 00 00 e8 b6 2e fe ff 0f b6
Call Trace:
process_one_work+0x1df/0x3b0
worker_thread+0x44/0x3d0
kthread+0xf3/0x130
? set_worker_desc+0xb0/0xb0
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x35/0x40
This happens when the remote tick applies on an idle task. Usually the
idle_cpu() check avoids that, but it is performed before we lock the
runqueue and it is therefore racy. It was intended to be that way in
order to prevent from useless runqueue locks since idle task tick
callback is a no-op.
Now if the racy check slips out of our hands and we end up remotely
ticking an idle task, the empty task_tick_idle() is harmless. Still
it won't pass the WARN_ON_ONCE() test that ensures rq_clock_task() is
not too far from curr->se.exec_start because update_curr_idle() doesn't
update the exec_start value like other scheduler policies. Hence the
reported false positive.
So let's have another check, while the rq is locked, to make sure we
don't remote tick on an idle task. The lockless idle_cpu() still applies
to avoid unecessary rq lock contention.
Reported-by: Jacek Tomaka <jacekt@dug.com>
Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reported-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1530203381-31234-1-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull networking fixes from David Miller:
1) Verify netlink attributes properly in nf_queue, from Eric Dumazet.
2) Need to bump memory lock rlimit for test_sockmap bpf test, from
Yonghong Song.
3) Fix VLAN handling in lan78xx driver, from Dave Stevenson.
4) Fix uninitialized read in nf_log, from Jann Horn.
5) Fix raw command length parsing in mlx5, from Alex Vesker.
6) Cleanup loopback RDS connections upon netns deletion, from Sowmini
Varadhan.
7) Fix regressions in FIB rule matching during create, from Jason A.
Donenfeld and Roopa Prabhu.
8) Fix mpls ether type detection in nfp, from Pieter Jansen van Vuuren.
9) More bpfilter build fixes/adjustments from Masahiro Yamada.
10) Fix XDP_{TX,REDIRECT} flushing in various drivers, from Jesper
Dangaard Brouer.
11) fib_tests.sh file permissions were broken, from Shuah Khan.
12) Make sure BH/preemption is disabled in data path of mac80211, from
Denis Kenzior.
13) Don't ignore nla_parse_nested() return values in nl80211, from
Johannes berg.
14) Properly account sock objects ot kmemcg, from Shakeel Butt.
15) Adjustments to setting bpf program permissions to read-only, from
Daniel Borkmann.
16) TCP Fast Open key endianness was broken, it always took on the host
endiannness. Whoops. Explicitly make it little endian. From Yuching
Cheng.
17) Fix prefix route setting for link local addresses in ipv6, from
David Ahern.
18) Potential Spectre v1 in zatm driver, from Gustavo A. R. Silva.
19) Various bpf sockmap fixes, from John Fastabend.
20) Use after free for GRO with ESP, from Sabrina Dubroca.
21) Passing bogus flags to crypto_alloc_shash() in ipv6 SR code, from
Eric Biggers.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits)
qede: Adverstise software timestamp caps when PHC is not available.
qed: Fix use of incorrect size in memcpy call.
qed: Fix setting of incorrect eswitch mode.
qed: Limit msix vectors in kdump kernel to the minimum required count.
ipvlan: call dev_change_flags when ipvlan mode is reset
ipv6: sr: fix passing wrong flags to crypto_alloc_shash()
net: fix use-after-free in GRO with ESP
tcp: prevent bogus FRTO undos with non-SACK flows
bpf: sockhash, add release routine
bpf: sockhash fix omitted bucket lock in sock_close
bpf: sockmap, fix smap_list_map_remove when psock is in many maps
bpf: sockmap, fix crash when ipv6 sock is added
net: fib_rules: bring back rule_exists to match rule during add
hv_netvsc: split sub-channel setup into async and sync
net: use dev_change_tx_queue_len() for SIOCSIFTXQLEN
atm: zatm: Fix potential Spectre v1
s390/qeth: consistently re-enable device features
s390/qeth: don't clobber buffer on async TX completion
s390/qeth: avoid using is_multicast_ether_addr_64bits on (u8 *)[6]
s390/qeth: fix race when setting MAC address
...
Despite being mentioned at Documentation/trace/ftrace.rst as a
rst file, this file was still a text one, with several issues.
Convert it to ReST and add it to the trace index:
- Mark the document title as such;
- Identify and indent the literal blocks;
- Use the proper markups for table.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
If PAGE_SIZE is unsigned type then negative error code will be
larger than PAGE_SIZE.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that we have the load_info struct all initialized (including
info->name, which contains the name of the module) before
module_sig_check(), make the load_info struct and hence module name
available to mod_verify_sig() so that we can log the module name in the
event of an error.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Air Icy reported:
UBSAN: Undefined behaviour in kernel/time/alarmtimer.c:811:7
signed integer overflow:
1529859276030040771 + 9223372036854775807 cannot be represented in type 'long long int'
Call Trace:
alarm_timer_nsleep+0x44c/0x510 kernel/time/alarmtimer.c:811
__do_sys_clock_nanosleep kernel/time/posix-timers.c:1235 [inline]
__se_sys_clock_nanosleep kernel/time/posix-timers.c:1213 [inline]
__x64_sys_clock_nanosleep+0x326/0x4e0 kernel/time/posix-timers.c:1213
do_syscall_64+0xb8/0x3a0 arch/x86/entry/common.c:290
alarm_timer_nsleep() uses ktime_add() to add the current time and the
relative expiry value. ktime_add() has no sanity checks so the addition
can overflow when the relative timeout is large enough.
Use ktime_add_safe() which has the necessary sanity checks in place and
limits the result to the valid range.
Fixes: 9a7adcf5c6 ("timers: Posix interface for alarm-timers")
Reported-by: Team OWL337 <icytxw@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1807020926360.1595@nanos.tec.linutronix.de
The posix timer overrun handling is broken because the forwarding functions
can return a huge number of overruns which does not fit in an int. As a
consequence timer_getoverrun(2) and siginfo::si_overrun can turn into
random number generators.
The k_clock::timer_forward() callbacks return a 64 bit value now. Make
k_itimer::ti_overrun[_last] 64bit as well, so the kernel internal
accounting is correct. 3Remove the temporary (int) casts.
Add a helper function which clamps the overrun value returned to user space
via timer_getoverrun(2) or siginfo::si_overrun limited to a positive value
between 0 and INT_MAX. INT_MAX is an indicator for user space that the
overrun value has been clamped.
Reported-by: Team OWL337 <icytxw@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Link: https://lkml.kernel.org/r/20180626132705.018623573@linutronix.de
The posix timer ti_overrun handling is broken because the forwarding
functions can return a huge number of overruns which does not fit in an
int. As a consequence timer_getoverrun(2) and siginfo::si_overrun can turn
into random number generators.
As a first step to address that let the timer_forward() callbacks return
the full 64 bit value.
Cast it to (int) temporarily until k_itimer::ti_overrun is converted to
64bit and the conversion to user space visible values is sanitized.
Reported-by: Team OWL337 <icytxw@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Link: https://lkml.kernel.org/r/20180626132704.922098090@linutronix.de
Due to the way Machine Check Exceptions work on X86 hyperthreads it's
required to boot up _all_ logical cores at least once in order to set the
CR4.MCE bit.
So instead of ignoring the sibling threads right away, let them boot up
once so they can configure themselves. After they came out of the initial
boot stage check whether its a "secondary" sibling and cancel the operation
which puts the CPU back into offline state.
Reported-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tony Luck <tony.luck@intel.com>
Daniel Borkmann says:
====================
pull-request: bpf 2018-07-01
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) A bpf_fib_lookup() helper fix to change the API before freeze to
return an encoding of the FIB lookup result and return the nexthop
device index in the params struct (instead of device index as return
code that we had before), from David.
2) Various BPF JIT fixes to address syzkaller fallout, that is, do not
reject progs when set_memory_*() fails since it could still be RO.
Also arm32 JIT was not using bpf_jit_binary_lock_ro() API which was
an issue, and a memory leak in s390 JIT found during review, from
Daniel.
3) Multiple fixes for sockmap/hash to address most of the syzkaller
triggered bugs. Usage with IPv6 was crashing, a GPF in bpf_tcp_close(),
a missing sock_map_release() routine to hook up to callbacks, and a
fix for an omitted bucket lock in sock_close(), from John.
4) Two bpftool fixes to remove duplicated error message on program load,
and another one to close the libbpf object after program load. One
additional fix for nfp driver's BPF offload to avoid stopping offload
completely if replace of program failed, from Jakub.
5) Couple of BPF selftest fixes that bail out in some of the test
scripts if the user does not have the right privileges, from Jeffrin.
6) Fixes in test_bpf for s390 when CONFIG_BPF_JIT_ALWAYS_ON is set
where we need to set the flag that some of the test cases are expected
to fail, from Kleber.
7) Fix to detangle BPF_LIRC_MODE2 dependency from CONFIG_CGROUP_BPF
since it has no relation to it and lirc2 users often have configs
without cgroups enabled and thus would not be able to use it, from Sean.
8) Fix a selftest failure in sockmap by removing a useless setrlimit()
call that would set a too low limit where at the same time we are
already including bpf_rlimit.h that does the job, from Yonghong.
9) Fix BPF selftest config with missing missing NET_SCHED, from Anders.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add map_release_uref pointer to hashmap ops. This was dropped when
original sockhash code was ported into bpf-next before initial
commit.
Fixes: 8111038444 ("bpf: sockmap, add hash map support")
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
First the sk_callback_lock() was being used to protect both the
sock callback hooks and the psock->maps list. This got overly
convoluted after the addition of sockhash (in sockmap it made
some sense because masp and callbacks were tightly coupled) so
lets split out a specific lock for maps and only use the callback
lock for its intended purpose. This fixes a couple cases where
we missed using maps lock when it was in fact needed. Also this
makes it easier to follow the code because now we can put the
locking closer to the actual code its serializing.
Next, in sock_hash_delete_elem() the pattern was as follows,
sock_hash_delete_elem()
[...]
spin_lock(bucket_lock)
l = lookup_elem_raw()
if (l)
hlist_del_rcu()
write_lock(sk_callback_lock)
.... destroy psock ...
write_unlock(sk_callback_lock)
spin_unlock(bucket_lock)
The ordering is necessary because we only know the {p}sock after
dereferencing the hash table which we can't do unless we have the
bucket lock held. Once we have the bucket lock and the psock element
it is deleted from the hashmap to ensure any other path doing a lookup
will fail. Finally, the refcnt is decremented and if zero the psock
is destroyed.
In parallel with the above (or free'ing the map) a tcp close event
may trigger tcp_close(). Which at the moment omits the bucket lock
altogether (oops!) where the flow looks like this,
bpf_tcp_close()
[...]
write_lock(sk_callback_lock)
for each psock->maps // list of maps this sock is part of
hlist_del_rcu(ref_hash_node);
.... destroy psock ...
write_unlock(sk_callback_lock)
Obviously, and demonstrated by syzbot, this is broken because
we can have multiple threads deleting entries via hlist_del_rcu().
To fix this we might be tempted to wrap the hlist operation in a
bucket lock but that would create a lock inversion problem. In
summary to follow locking rules the psocks maps list needs the
sk_callback_lock (after this patch maps_lock) but we need the bucket
lock to do the hlist_del_rcu.
To resolve the lock inversion problem pop the head of the maps list
repeatedly and remove the reference until no more are left. If a
delete happens in parallel from the BPF API that is OK as well because
it will do a similar action, lookup the lock in the map/hash, delete
it from the map/hash, and dec the refcnt. We check for this case
before doing a destroy on the psock to ensure we don't have two
threads tearing down a psock. The new logic is as follows,
bpf_tcp_close()
e = psock_map_pop(psock->maps) // done with map lock
bucket_lock() // lock hash list bucket
l = lookup_elem_raw(head, hash, key, key_size);
if (l) {
//only get here if elmnt was not already removed
hlist_del_rcu()
... destroy psock...
}
bucket_unlock()
And finally for all the above to work add missing locking around map
operations per above. Then add RCU annotations and use
rcu_dereference/rcu_assign_pointer to manage values relying on RCU so
that the object is not free'd from sock_hash_free() while it is being
referenced in bpf_tcp_close().
Reported-by: syzbot+0ce137753c78f7b6acc1@syzkaller.appspotmail.com
Fixes: 8111038444 ("bpf: sockmap, add hash map support")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
If a hashmap is free'd with open socks it removes the reference to
the hash entry from the psock. If that is the last reference to the
psock then it will also be free'd by the reference counting logic.
However the current logic that removes the hash reference from the
list of references is broken. In smap_list_remove() we first check
if the sockmap entry matches and then check if the hashmap entry
matches. But, the sockmap entry sill always match because its NULL in
this case which causes the first entry to be removed from the list.
If this is always the "right" entry (because the user adds/removes
entries in order) then everything is OK but otherwise a subsequent
bpf_tcp_close() may reference a free'd object.
To fix this create two list handlers one for sockmap and one for
sockhash.
Reported-by: syzbot+0ce137753c78f7b6acc1@syzkaller.appspotmail.com
Fixes: 8111038444 ("bpf: sockmap, add hash map support")
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This fixes a crash where we assign tcp_prot to IPv6 sockets instead
of tcpv6_prot.
Previously we overwrote the sk->prot field with tcp_prot even in the
AF_INET6 case. This patch ensures the correct tcp_prot and tcpv6_prot
are used.
Tested with 'netserver -6' and 'netperf -H [IPv6]' as well as
'netperf -H [IPv4]'. The ESTABLISHED check resolves the previously
crashing case here.
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Reported-by: syzbot+5c063698bdbfac19f363@syzkaller.appspotmail.com
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Partially undo commit 9facc33687 ("bpf: reject any prog that failed
read-only lock") since it caused a regression, that is, syzkaller was
able to manage to cause a panic via fault injection deep in set_memory_ro()
path by letting an allocation fail: In x86's __change_page_attr_set_clr()
it was able to change the attributes of the primary mapping but not in
the alias mapping via cpa_process_alias(), so the second, inner call
to the __change_page_attr() via __change_page_attr_set_clr() had to split
a larger page and failed in the alloc_pages() with the artifically triggered
allocation error which is then propagated down to the call site.
Thus, for set_memory_ro() this means that it returned with an error, but
from debugging a probe_kernel_write() revealed EFAULT on that memory since
the primary mapping succeeded to get changed. Therefore the subsequent
hdr->locked = 0 reset triggered the panic as it was performed on read-only
memory, so call-site assumptions were infact wrong to assume that it would
either succeed /or/ not succeed at all since there's no such rollback in
set_memory_*() calls from partial change of mappings, in other words, we're
left in a state that is "half done". A later undo via set_memory_rw() is
succeeding though due to matching permissions on that part (aka due to the
try_preserve_large_page() succeeding). While reproducing locally with
explicitly triggering this error, the initial splitting only happens on
rare occasions and in real world it would additionally need oom conditions,
but that said, it could partially fail. Therefore, it is definitely wrong
to bail out on set_memory_ro() error and reject the program with the
set_memory_*() semantics we have today. Shouldn't have gone the extra mile
since no other user in tree today infact checks for any set_memory_*()
errors, e.g. neither module_enable_ro() / module_disable_ro() for module
RO/NX handling which is mostly default these days nor kprobes core with
alloc_insn_page() / free_insn_page() as examples that could be invoked long
after bootup and original 314beb9bca ("x86: bpf_jit_comp: secure bpf jit
against spraying attacks") did neither when it got first introduced to BPF
so "improving" with bailing out was clearly not right when set_memory_*()
cannot handle it today.
Kees suggested that if set_memory_*() can fail, we should annotate it with
__must_check, and all callers need to deal with it gracefully given those
set_memory_*() markings aren't "advisory", but they're expected to actually
do what they say. This might be an option worth to move forward in future
but would at the same time require that set_memory_*() calls from supporting
archs are guaranteed to be "atomic" in that they provide rollback if part
of the range fails, once that happened, the transition from RW -> RO could
be made more robust that way, while subsequent RO -> RW transition /must/
continue guaranteeing to always succeed the undo part.
Reported-by: syzbot+a4eb8c7766952a1ca872@syzkaller.appspotmail.com
Reported-by: syzbot+d866d1925855328eac3b@syzkaller.appspotmail.com
Fixes: 9facc33687 ("bpf: reject any prog that failed read-only lock")
Cc: Laura Abbott <labbott@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Check the audit_enabled flag and bail immediately. This does not change
the functionality, but brings the code format in line with similar
checks in audit_tree_log_remove_rule(), audit_mark_log_rule_change(),
and elsewhere in the audit code.
See: https://github.com/linux-audit/audit-kernel/issues/50
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: tweaked subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Respect the audit_enabled flag when printing tree rule config change
records.
See: https://github.com/linux-audit/audit-kernel/issues/50
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: tweak the subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
This is a preparation patch for adding a number of WARN_CONSOLE_UNLOCKED()
calls to the fbcon code, which may be built as a module (event though
usually it is not).
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
For architectures that do not use per-device dma ops we need to export
the dma_map_ops structure returned from get_arch_dma_ops().
Fixes: 10314e09 ("riscv: add swiotlb support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Andreas Schwab <schwab@suse.de>
This patch make sure printing of log on console if loglevel
at time of storing log is less than current console loglevel.
@why
In SMP printk can work asynchronously, logs can be missed on console
because it checks current log level at time of console_unlock,
not at time of storing logs.
func()
{
....
....
console_verbose(); // user wants to have all the logs on console.
pr_alert();
dump_backtrace(); //prints with default loglevel.
...
console_silent(); // stop all logs from printing on console.
}
Now if console_lock was owned by another process, the messages might
be handled after the consoles were silenced.
Reused flag LOG_NOCONS as its usage is gone long back by the commit
5c2992ee7f ("printk: remove console flushing special cases
for partial buffered lines").
Note that there are still some corner cases where this patch is not enough.
For example, when the messages are flushed later from printk_safe buffers
or when there are races between console_verbose() and console_silent()
callers.
Link: http://lkml.kernel.org/r/20180601090029epcas5p3cc93d4bfbebb3199f0a2684058da7e26~z-a_jkmrI2993329933epcas5p3q@epcas5p3.samsung.com
Cc: linux-kernel@vger.kernel.org
Cc: a.sahrawat@samsung.com
Cc: pankaj.m@samsung.com
Cc: v.narang@samsung.com
Cc: <maninder1.s@samsung.com>
Signed-off-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Make the code to attach/detach a connector to object more generic
by letting the fsnotify connector point to an abstract fsnotify_connp_t.
Code that needs to dereference an inode or mount object now uses the
helpers fsnotify_conn_{inode,mount}.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
There is a two-jiffy delay between the time that a CPU will self-report
an RCU CPU stall warning and the time that some other CPU will report a
warning on behalf of the first CPU. This has worked well in the past,
but on busy systems, it is possible for the two warnings to overlap,
which makes interpreting them extremely difficult.
This commit therefore uses a cmpxchg-based timing decision that
allows only one report in a given one-minute period (assuming default
stall-warning Kconfig parameters). This approach will of course fail
if you are seeing minute-long vCPU preemption, but in that case the
overlapping RCU CPU stall warnings are the least of your worries.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Sparse reported this:
| kernel/rcu/tree_plugin.h:814:9: warning: incorrect type in argument 1 (different modifiers)
| kernel/rcu/tree_plugin.h:814:9: expected struct lockdep_map const *lock
| kernel/rcu/tree_plugin.h:814:9: got struct lockdep_map [noderef] *<noident>
This is caused by using vanilla lockdep annotations on rcu_node::lock,
and that requires accessing ->lock of rcu_node directly. However we need
to keep rcu_node::lock __private to avoid breaking its extra ordering
guarantee. And we have a dedicated lockdep annotation for
rcu_node::lock, so use it.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The WARN_ON_ONCE(rcu_preempt_blocked_readers_cgp()) in
rcu_gp_cleanup() triggers (inexplicably, of course) every so often.
This commit therefore extracts more information.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
If the kernel is compiled with CONFIG_CGROUP_BPF not enabled, it is not
possible to attach, detach or query IR BPF programs to /dev/lircN devices,
making them impossible to use. For embedded devices, it should be possible
to use IR decoding without cgroups or CONFIG_CGROUP_BPF enabled.
This change requires some refactoring, since bpf_prog_{attach,detach,query}
functions are now always compiled, but their code paths for cgroups need
moving out. Rather than a #ifdef CONFIG_CGROUP_BPF in kernel/bpf/syscall.c,
moving them to kernel/bpf/cgroup.c and kernel/bpf/sockmap.c does not
require #ifdefs since that is already conditionally compiled.
Fixes: f4364dcfc8 ("media: rc: introduce BPF_PROG_LIRC_MODE2")
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Remove the dance around old and new attributes. Just don't modify the
previous breakpoint at all until we have verified everything.
Original-patch-by: Andy Lutomirski <luto@kernel.org>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joel Fernandes <joel.opensrc@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/1529981939-8231-13-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We soon won't be able to rely on bp->attr anymore to get the new
type of the modifying breakpoint because the new attributes are going
to be copied only once we successfully modified the breakpoint slot.
This will fix the current misdesigned layout where the new attr are
copied to the modifying breakpoint before we actually know if the
modification will be validated.
In order to prepare for that, allow modify_breakpoint_slot() to take
the new breakpoint type.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joel Fernandes <joel.opensrc@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/1529981939-8231-12-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
All architectures have implemented it, we can now remove the poor weak
version.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joel Fernandes <joel.opensrc@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/1529981939-8231-11-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We can't pass the breakpoint directly on arch_check_bp_in_kernelspace()
anymore because its architecture internal datas (struct arch_hw_breakpoint)
are not yet filled by the time we call the function, and most
implementation need this backend to be up to date. So arrange the
function to take the probing struct instead.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joel Fernandes <joel.opensrc@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/1529981939-8231-3-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
arch_validate_hwbkpt_settings() mixes up attribute check and commit into
a single code entity. Therefore the validation may return an error due to
incorrect atributes while still leaving halfway modified architecture
breakpoint data.
This is harmless when we deal with a new breakpoint but it becomes a
problem when we modify an existing breakpoint.
Split attribute parse and commit to fix that. The architecture is
passed a "struct arch_hw_breakpoint" to fill on top of the new attr
and the core takes care about copying the backend data once it's fully
validated. The architectures then need to implement the new API.
Original-patch-by: Andy Lutomirski <luto@kernel.org>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joel Fernandes <joel.opensrc@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/1529981939-8231-2-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This commit adds "#define pr_fmt(fmt) fmt" to the torture-test files
in order to keep the current dmesg format. Once Joe's commits have
hit mainline, these definitions will be changed in order to automatically
generate the dmesg line prefix that the scripts expect. This will have
the beneficial side-effect of allowing printk() formats to be used more
widely and of shortening some pr_*() lines.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Joe Perches <joe@perches.com>
Some bugs reproduce quickly only at high CPU-hotplug rates, so the
rcutorture TREE03 scenario now has only 200 milliseconds spacing between
CPU-hotplug operations. At this rate, the torture-test pair of console
messages per operation becomes a bit voluminous. This commit therefore
converts the torture-test set of "verbose" kernel-boot arguments from
bool to int, and prints the extra console messages only when verbose=2.
The default is still verbose=1.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds the address of the first callback to the per-CPU rcutorture
output in order to allow lost wakeups to be more efficiently tracked down.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit updates the header comment of srcu_funnel_gp_start() to
document the fact that srcu_funnel_gp_start() does the work of
srcu_funnel_exp_start(), in some cases by invoking it directly.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit simply changes some copy-pasta call_rcu() instances to
the correct call_srcu().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
During expedited grace-period initialization, a work item is scheduled
for each leaf rcu_node structure. However, that initialization code
is itself (normally) executing from a workqueue, so one of the leaf
rcu_node structures could just as well be handled by that pre-existing
workqueue, and with less overhead. This commit therefore uses a
shiny new rcu_is_leaf_node() macro to execute the last leaf rcu_node
structure's initialization directly from the pre-existing workqueue.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
With the special case handling for Blackfin and Metag was removed by
commit 94e58e0ac3 ("export.h: remove code for prefixing symbols with
underscore"), VMLINUX_SYMBOL_STR() is now equivalent to __stringify().
Replace the remaining usages to prepare for the entire removal of
VMLINUX_SYMBOL_STR().
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Printing "err 0" to the user in the warning message is not particularly
useful, especially when this gets transformed into a -ENOENT for the
remainder of the call chain.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
The MIPS bmips platform needs a global flush when transferring ownership
back to the CPU. Add a hook for that to the dma-noncoherent
implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/19549/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Tom Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-mips@linux-mips.org
struct itimerspec is not y2038-safe.
Introduce a new struct __kernel_itimerspec based on the kernel internal
y2038-safe struct itimerspec64.
The definition of struct __kernel_itimerspec includes two struct
__kernel_timespec.
Since struct __kernel_timespec has the same representation in native and
compat modes, so does struct __kernel_itimerspec. This helps have a common
entry point for syscalls using struct __kernel_itimerspec.
New y2038-safe syscalls will use this new type. Since most of the new
syscalls are just an update to the native syscalls with the type update,
place the new definition under CONFIG_64BIT_TIME. This helps architectures
that do not support the above config to keep using the old definition of
struct itimerspec.
Also change the get/put_itimerspec64 to use struct__kernel_itimerspec.
This will help 32 bit architectures to use the new syscalls when
architectures select CONFIG_64BIT_TIME.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: viro@zeniv.linux.org.uk
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Cc: y2038@lists.linaro.org
Link: https://lkml.kernel.org/r/20180617051144.29756-2-deepa.kernel@gmail.com
Pull perf fixes from Thomas Gleixner:
"A pile of perf updates:
Kernel side:
- Remove an incorrect warning in uprobe_init_insn() when
insn_get_length() fails. The error return code is handled at the
call site.
- Move the inline keyword to the right place in the perf ringbuffer
code to address a W=1 build warning.
Tooling:
perf stat:
- Fix metric column header display alignment
- Improve error messages for default attributes, providing better
output for error in command line.
- Add --interval-clear option, to provide a 'watch' like printing
perf script:
- Show hw-cache events too
perf c2c:
- Fix data dependency problem in layout of 'struct c2c_hist_entry'
Core:
- Do not blindly assume that 'struct perf_evsel' can be obtained via
a straight forward container_of() as there are call sites which
hand in a plain 'struct hist' which is not part of a container.
- Fix error index in the PMU event parser, so that error messages can
point to the problematic token"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Move the inline keyword at the beginning of the function declaration
uprobes/x86: Remove incorrect WARN_ON() in uprobe_init_insn()
perf script: Show hw-cache events
perf c2c: Keep struct hist_entry at the end of struct c2c_hist_entry
perf stat: Add event parsing error handling to add_default_attributes
perf stat: Allow to specify specific metric column len
perf stat: Fix metric column header display alignment
perf stat: Use only color_fprintf call in print_metric_only
perf stat: Add --interval-clear option
perf tools: Fix error index for pmu event parser
perf hists: Reimplement hists__has_callchains()
perf hists browser gtk: Use hist_entry__has_callchains()
perf hists: Make hist_entry__has_callchains() work with 'perf c2c'
perf hists: Save the callchain_size in struct hist_entry
Pull rseq fixes from Thomas Gleixer:
"A pile of rseq related fixups:
- Prevent infinite recursion when delivering SIGSEGV
- Remove the abort of rseq critical section on fork() as syscalls
inside rseq critical sections are explicitely forbidden. So no
point in doing the abort on the child.
- Align the rseq structure on 32 bytes in the ARM selftest code.
- Fix file permissions of the test script"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Avoid infinite recursion when delivering SIGSEGV
rseq/cleanup: Do not abort rseq c.s. in child on fork()
rseq/selftests/arm: Align 'struct rseq_cs' on 32 bytes
rseq/selftests: Make run_param_test.sh executable
When pciehp is converted to threaded IRQ handling, removal of unplugged
devices below a PCIe hotplug port happens synchronously in the IRQ thread.
Removal of devices typically entails a call to free_irq() by their drivers.
If those devices share their IRQ with the hotplug port, __free_irq()
deadlocks because it calls synchronize_irq() to wait for all hard IRQ
handlers as well as all threads sharing the IRQ to finish.
Actually it's sufficient to wait only for the IRQ thread of the removed
device, so call synchronize_hardirq() to wait for all hard IRQ handlers to
finish, but no longer for any threads. Compensate by rearranging the
control flow in irq_wait_for_interrupt() such that the device's thread is
allowed to run one last time after kthread_stop() has been called.
kthread_stop() blocks until the IRQ thread has completed. On completion
the IRQ thread clears its oneshot thread_mask bit. This is safe because
__free_irq() holds the request_mutex, thereby preventing __setup_irq() from
handing out the same oneshot thread_mask bit to a newly requested action.
Stack trace for posterity:
INFO: task irq/17-pciehp:94 blocked for more than 120 seconds.
schedule+0x28/0x80
synchronize_irq+0x6e/0xa0
__free_irq+0x15a/0x2b0
free_irq+0x33/0x70
pciehp_release_ctrl+0x98/0xb0
pcie_port_remove_service+0x2f/0x40
device_release_driver_internal+0x157/0x220
bus_remove_device+0xe2/0x150
device_del+0x124/0x340
device_unregister+0x16/0x60
remove_iter+0x1a/0x20
device_for_each_child+0x4b/0x90
pcie_port_device_remove+0x1e/0x30
pci_device_remove+0x36/0xb0
device_release_driver_internal+0x157/0x220
pci_stop_bus_device+0x7d/0xa0
pci_stop_bus_device+0x3d/0xa0
pci_stop_and_remove_bus_device+0xe/0x20
pciehp_unconfigure_device+0xb8/0x160
pciehp_disable_slot+0x84/0x130
pciehp_ist+0x158/0x190
irq_thread_fn+0x1b/0x50
irq_thread+0x143/0x1a0
kthread+0x111/0x130
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org
Link: https://lkml.kernel.org/r/d72b41309f077c8d3bee6cc08ad3662d50b5d22a.1529828292.git.lukas@wunner.de
Previously a race existed between __free_irq() and __setup_irq() wherein
the thread_mask of a just removed action could be handed out to a newly
added action and the freed irq thread would then tread on the oneshot
mask bit of the newly added irq thread in irq_finalize_oneshot():
time
| __free_irq()
| raw_spin_lock_irqsave(&desc->lock, flags);
| <remove action from linked list>
| raw_spin_unlock_irqrestore(&desc->lock, flags);
|
| __setup_irq()
| raw_spin_lock_irqsave(&desc->lock, flags);
| <traverse linked list to determine oneshot mask bit>
| raw_spin_unlock_irqrestore(&desc->lock, flags);
|
| irq_thread() of freed irq (__free_irq() waits in synchronize_irq())
| irq_thread_fn()
| irq_finalize_oneshot()
| raw_spin_lock_irq(&desc->lock);
| desc->threads_oneshot &= ~action->thread_mask;
| raw_spin_unlock_irq(&desc->lock);
v
The race was known at least since 2012 when it was documented in a code
comment by commit e04268b0ef ("genirq: Remove paranoid warnons and bogus
fixups"). The race itself is harmless as nothing touches any of the
potentially freed data after synchronize_irq().
In 2017 the race was close by commit 9114014cf4 ("genirq: Add mutex to
irq desc to serialize request/free_irq()"), apparently inadvertantly so
because the race is neither mentioned in the commit message nor was the
code comment updated. Make up for that.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org
Link: https://lkml.kernel.org/r/32fc25aa35ecef4b2692f57687bb7fc2a57230e2.1529828292.git.lukas@wunner.de
Pull locking fixes from Thomas Gleixner:
"A set of fixes and updates for the locking code:
- Prevent lockdep from updating irq state within its own code and
thereby confusing itself.
- Buid fix for older GCCs which mistreat anonymous unions
- Add a missing lockdep annotation in down_read_non_onwer() which
causes up_read_non_owner() to emit a lockdep splat
- Remove the custom alpha dec_and_lock() implementation which is
incorrect in terms of ordering and use the generic one.
The remaining two commits are not strictly fixes. They provide irqsave
variants of atomic_dec_and_lock() and refcount_dec_and_lock(). These
are required to merge the relevant updates and cleanups into different
maintainer trees for 4.19, so routing them into mainline without
actual users is the sanest approach.
They should have been in -rc1, but last weekend I took the liberty to
just avoid computers in order to regain some mental sanity"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/qspinlock: Fix build for anonymous union in older GCC compilers
locking/lockdep: Do not record IRQ state within lockdep code
locking/rwsem: Fix up_read_non_owner() warning with DEBUG_RWSEMS
locking/refcounts: Implement refcount_dec_and_lock_irqsave()
atomic: Add irqsave variant of atomic_dec_and_lock()
alpha: Remove custom dec_and_lock() implementation
Pull timer fixes from Thomas Gleixner:
"A small set of fixes for time(r) related issues:
- Fix a long standing conversion issue in jiffies_to_msecs() for odd
HZ values like 1024 or 1200 which resulted in returning 0 for small
jiffies values due to rounding down.
- Use the proper CONFIG symbol in the new Y2038 safe compat code for
posix-timers. Not yet a visible breakage, but this will immediately
trigger when the architecture support for the new interfaces is
merged.
- Return an error code in the STM32 clocksource driver on failure
instead of success.
- Remove the redundant and stale irq disabled check in the posix cpu
timer code. The check is at the wrong place anyway and lockdep
already covers it via the sighand lock locking coverage"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Make sure jiffies_to_msecs() preserves non-zero time periods
posix-timers: Fix nanosleep_copyout() for CONFIG_COMPAT_32BIT_TIME
clocksource/drivers/stm32: Fix error return code
posix-cpu-timers: Remove lockdep_assert_irqs_disabled()
Pull irq fixes from Thomas Gleixner:
"A set of fixes mostly for the ARM/GIC world:
- Fix the MSI affinity handling in the ls-scfg irq chip driver so it
updates and uses the effective affinity mask correctly
- Prevent binding LPIs to offline CPUs and respect the Cavium erratum
which requires that LPIs which belong to an offline NUMA node are
not bound to a CPU on a different NUMA node.
- Free only the amount of allocated interrupts in the GIC-V2M driver
instead of trying to free log2(nrirqs).
- Prevent emitting SYNC and VSYNC targetting non existing interrupt
collections in the GIC-V3 ITS driver
- Ensure that the GIV-V3 interrupt redistributor is correctly
reprogrammed on CPU hotplug
- Remove a stale unused helper function"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqdesc: Delete irq_desc_get_msi_desc()
irqchip/gic-v3-its: Fix reprogramming of redistributors on CPU hotplug
irqchip/gic-v3-its: Only emit VSYNC if targetting a valid collection
irqchip/gic-v3-its: Only emit SYNC if targetting a valid collection
irqchip/gic-v3-its: Don't bind LPI to unavailable NUMA node
irqchip/gic-v2m: Fix SPI release on error path
irqchip/ls-scfg-msi: Fix MSI affinity handling
genirq/debugfs: Add missing IRQCHIP_SUPPORTS_LEVEL_MSI debug
- A bad merge caused an "endif" to go in the wrong place in
scripts/Makefile.build
- Softirq tracing fix for tracing that corrupts lockdep and causes a false
splat
- Histogram documentation typo fixes
- Fix a bad memory reference when passing in no filter to the filter code
- Simplify code by using the swap macro instead of open coding the swap
-----BEGIN PGP SIGNATURE-----
iIkEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWy2gMBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qsqWAPdmoudDVf9Wi+THEJzlZL7ZhfYSDQyi
A5Y3mc3iKoZeAQCq7PD7uH4Q1IMaVbAKG8OxvGVb69ijkMsSL4XxD33sAQ==
=U1V7
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"This contains a few fixes and a clean up.
- a bad merge caused an "endif" to go in the wrong place in
scripts/Makefile.build
- softirq tracing fix for tracing that corrupts lockdep and causes a
false splat
- histogram documentation typo fixes
- fix a bad memory reference when passing in no filter to the filter
code
- simplify code by using the swap macro instead of open coding the
swap"
* tag 'trace-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix SKIP_STACK_VALIDATION=1 build due to bad merge with -mrecord-mcount
tracing: Fix some errors in histogram documentation
tracing: Use swap macro in update_max_tr
softirq: Reorder trace_softirqs_on to prevent lockdep splat
tracing: Check for no filter when processing event filters
When delivering a signal to a task that is using rseq, we call into
__rseq_handle_notify_resume() so that the registers pushed in the
sigframe are updated to reflect the state of the restartable sequence
(for example, ensuring that the signal returns to the abort handler if
necessary).
However, if the rseq management fails due to an unrecoverable fault when
accessing userspace or certain combinations of RSEQ_CS_* flags, then we
will attempt to deliver a SIGSEGV. This has the potential for infinite
recursion if the rseq code continuously fails on signal delivery.
Avoid this problem by using force_sigsegv() instead of force_sig(), which
is explicitly designed to reset the SEGV handler to SIG_DFL in the case
of a recursive fault. In doing so, remove rseq_signal_deliver() from the
internal rseq API and have an optional struct ksignal * parameter to
rseq_handle_notify_resume() instead.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: peterz@infradead.org
Cc: paulmck@linux.vnet.ibm.com
Cc: boqun.feng@gmail.com
Link: https://lkml.kernel.org/r/1529664307-983-1-git-send-email-will.deacon@arm.com
For the common cases where 1000 is a multiple of HZ, or HZ is a multiple of
1000, jiffies_to_msecs() never returns zero when passed a non-zero time
period.
However, if HZ > 1000 and not an integer multiple of 1000 (e.g. 1024 or
1200, as used on alpha and DECstation), jiffies_to_msecs() may return zero
for small non-zero time periods. This may break code that relies on
receiving back a non-zero value.
jiffies_to_usecs() does not need such a fix: one jiffy can only be less
than one µs if HZ > 1000000, and such large values of HZ are already
rejected at build time, twice:
- include/linux/jiffies.h does #error if HZ >= 12288,
- kernel/time/time.c has BUILD_BUG_ON(HZ > USEC_PER_SEC).
Broken since forever.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-alpha@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180622143357.7495-1-geert@linux-m68k.org
Since commit 425a5072dc ("genirq: Free irq_desc with rcu"),
show_interrupts() can be switched to rcu locking, which removes possible
contention on sparse_irq_lock.
The per_cpu count scan and print can be done without holding desc spinlock.
And there is no need to call kstat_irqs_cpu() and abuse irq_to_desc() while
holding rcu read lock, since desc and desc->kstat_irqs wont disappear or
change.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Link: https://lkml.kernel.org/r/20180620150332.163320-1-edumazet@google.com
Debug is missing the IRQCHIP_SUPPORTS_LEVEL_MSI debug entry, making debugfs
slightly less useful.
Take this opportunity to also add a missing comment in the definition of
IRQCHIP_SUPPORTS_LEVEL_MSI.
Fixes: 6988e0e0d2 ("genirq/msi: Limit level-triggered MSI to platform devices")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Link: https://lkml.kernel.org/r/20180622095254.5906-2-marc.zyngier@arm.com
We want to be able to log the module name in early error messages, such as
when module signature verification fails. Previously, the module name is
set in layout_and_allocate(), meaning that any error messages that happen
before (such as those in module_sig_check()) won't be logged with a module
name, which isn't terribly helpful.
In order to do this, reshuffle the order in load_module() and set up
load info earlier so that we can log the module name along with these
error messages. This requires splitting rewrite_section_headers() out of
setup_load_info().
While we're at it, clean up and split up the operations done in
layout_and_allocate(), setup_load_info(), and rewrite_section_headers()
more cleanly so these functions only perform what their names suggest.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
In load_module(), it's not always clear whether we're handling the
temporary module copy in info->hdr (which is freed at the end of
load_module()) or if we're handling the module already allocated and
copied to it's final place. Adding an info->mod field and using it
whenever we're handling the temporary copy makes that explicitly clear.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
When building perf with W=1 the following warning triggers:
CC kernel/events/ring_buffer.o
kernel/events/ring_buffer.c:105:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
static bool __always_inline
^~~~~~
...
Move the inline keyword to the beginning of the function declaration.
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: trival@kernel.org
Link: http://lkml.kernel.org/r/20180308202856.9378-1-malat@debian.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Make use of the swap macro and remove unnecessary variable _buf_.
This makes the code easier to read and maintain. Also, reduces the
stack usage.
This code was detected with the help of Coccinelle.
Link: http://lkml.kernel.org/r/20180209175316.GA18720@embeddedgus
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The syzkaller detected a out-of-bounds issue with the events filter code,
specifically here:
prog[N].pred = NULL; /* #13 */
prog[N].target = 1; /* TRUE */
prog[N+1].pred = NULL;
prog[N+1].target = 0; /* FALSE */
-> prog[N-1].target = N;
prog[N-1].when_to_branch = false;
As that's the first reference to a "N-1" index, it appears that the code got
here with N = 0, which means the filter parser found no filter to parse
(which shouldn't ever happen, but apparently it did).
Add a new error to the parsing code that will check to make sure that N is
not zero before going into this part of the code. If N = 0, then -EINVAL is
returned, and a error message is added to the filter.
Cc: stable@vger.kernel.org
Fixes: 80765597bc ("tracing: Rewrite filter logic to be simpler and faster")
Reported-by: air icy <icytxw@gmail.com>
bugzilla url: https://bugzilla.kernel.org/show_bug.cgi?id=200019
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
While debugging where things were going wrong with mapping
enabling/disabling interrupts with the lockdep state and actual real
enabling and disabling interrupts, I had to silent the IRQ
disabling/enabling in debug_check_no_locks_freed() because it was
always showing up as it was called before the splat was.
Use raw_local_irq_save/restore() for not only debug_check_no_locks_freed()
but for all internal lockdep functions, as they hide useful information
about where interrupts were used incorrectly last.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/lkml/20180404140630.3f4f4c7a@gandalf.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
After commit:
82958366cf ("sched: Replace update_shares weight distribution with per-entity computation")
tg_unthrottle_up() did not update the weight.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/lkml/1523423816-18322-1-git-send-email-lirongqing@baidu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Replace %p with %pS or just remove it if unneeded.
And use WARN_ONCE() if it is a single bug.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Howells <dhowells@redhat.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jon Medhurst <tixy@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tobin C . Harding <me@tobin.cc>
Cc: Will Deacon <will.deacon@arm.com>
Cc: acme@kernel.org
Cc: akpm@linux-foundation.org
Cc: brueckner@linux.vnet.ibm.com
Cc: linux-arch@vger.kernel.org
Cc: rostedt@goodmis.org
Cc: schwidefsky@de.ibm.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/lkml/152491899284.9916.5350534544808158621.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Show probed address in debugfs kprobe list file as same
as kallsyms does. This information is used for checking
kprobes are placed in the expected address. So it should
be able to compared with address in kallsyms.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Howells <dhowells@redhat.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jon Medhurst <tixy@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tobin C . Harding <me@tobin.cc>
Cc: Will Deacon <will.deacon@arm.com>
Cc: acme@kernel.org
Cc: akpm@linux-foundation.org
Cc: brueckner@linux.vnet.ibm.com
Cc: linux-arch@vger.kernel.org
Cc: rostedt@goodmis.org
Cc: schwidefsky@de.ibm.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/lkml/152491896256.9916.1583733714492565296.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Show kprobes blacklist addresses under same condition of
showing kallsyms addresses.
Since there are several name conflict for local symbols,
kprobe blacklist needs to show each addresses so that
user can identify where is on blacklist by comparing
with kallsyms.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Howells <dhowells@redhat.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jon Medhurst <tixy@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tobin C . Harding <me@tobin.cc>
Cc: Will Deacon <will.deacon@arm.com>
Cc: acme@kernel.org
Cc: akpm@linux-foundation.org
Cc: brueckner@linux.vnet.ibm.com
Cc: linux-arch@vger.kernel.org
Cc: rostedt@goodmis.org
Cc: schwidefsky@de.ibm.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/lkml/152491893217.9916.14760965896164273464.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since the blacklist and list files on debugfs indicates
a sensitive address information to reader, it should be
restricted to the root user.
Suggested-by: Thomas Richter <tmricht@linux.ibm.com>
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Howells <dhowells@redhat.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jon Medhurst <tixy@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tobin C . Harding <me@tobin.cc>
Cc: Will Deacon <will.deacon@arm.com>
Cc: acme@kernel.org
Cc: akpm@linux-foundation.org
Cc: brueckner@linux.vnet.ibm.com
Cc: linux-arch@vger.kernel.org
Cc: rostedt@goodmis.org
Cc: schwidefsky@de.ibm.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/lkml/152491890171.9916.5183693615601334087.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use new return type 'vm_fault_t' for fault handlers.
For now, this is just documenting that the function returns
a VM_FAULT value rather than an errno. Once all instances
are converted, vm_fault_t will become a distinct type.
See the following commit:
1c8f422059 ("mm: change return type to vm_fault_t")
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: akpm@linux-foundation.org
Cc: alexander.shishkin@linux.intel.com
Cc: jolsa@redhat.com
Cc: namhyung@kernel.org
Link: https://lkml.kernel.org/lkml/20180521182520.GA19677@jordon-HP-15-Notebook-PC
Signed-off-by: Ingo Molnar <mingo@kernel.org>
match_string() returns the index of an array for a matching string,
which can be used instead of the open coded variant.
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/1527765086-19873-15-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While __atomic_add_unless() was originally intended as a building-block
for atomic_add_unless(), it's now used in a number of places around the
kernel. It's the only common atomic operation named __atomic*(), rather
than atomic_*(), and for consistency it would be better named
atomic_fetch_add_unless().
This lack of consistency is slightly confusing, and gets in the way of
scripting atomics. Given that, let's clean things up and promote it to
an official part of the atomics API, in the form of
atomic_fetch_add_unless().
This patch converts definitions and invocations over to the new name,
including the instrumented version, using the following script:
----
git grep -w __atomic_add_unless | while read line; do
sed -i '{s/\<__atomic_add_unless\>/atomic_fetch_add_unless/}' "${line%%:*}";
done
git grep -w __arch_atomic_add_unless | while read line; do
sed -i '{s/\<__arch_atomic_add_unless\>/arch_atomic_fetch_add_unless/}' "${line%%:*}";
done
----
Note that we do not have atomic{64,_long}_fetch_add_unless(), which will
be introduced by later patches.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Palmer Dabbelt <palmer@sifive.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/20180621121321.4761-2-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Provide a command line and a sysfs knob to control SMT.
The command line options are:
'nosmt': Enumerate secondary threads, but do not online them
'nosmt=force': Ignore secondary threads completely during enumeration
via MP table and ACPI/MADT.
The sysfs control file has the following states (read/write):
'on': SMT is enabled. Secondary threads can be freely onlined
'off': SMT is disabled. Secondary threads, even if enumerated
cannot be onlined
'forceoff': SMT is permanentely disabled. Writes to the control
file are rejected.
'notsupported': SMT is not supported by the CPU
The command line option 'nosmt' sets the sysfs control to 'off'. This
can be changed to 'on' to reenable SMT during runtime.
The command line option 'nosmt=force' sets the sysfs control to
'forceoff'. This cannot be changed during runtime.
When SMT is 'on' and the control file is changed to 'off' then all online
secondary threads are offlined and attempts to online a secondary thread
later on are rejected.
When SMT is 'off' and the control file is changed to 'on' then secondary
threads can be onlined again. The 'off' -> 'on' transition does not
automatically online the secondary threads.
When the control file is set to 'forceoff', the behaviour is the same as
setting it to 'off', but the operation is irreversible and later writes to
the control file are rejected.
When the control status is 'notsupported' then writes to the control file
are rejected.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Split out the inner workings of do_cpu_down() to allow reuse of that
function for the upcoming SMT disabling mechanism.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
The asymmetry caused a warning to trigger if the bootup was stopped in state
CPUHP_AP_ONLINE_IDLE. The warning no longer triggers as kthread_park() can
now be invoked on already or still parked threads. But there is still no
reason to have this be asymmetric.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
The static key sched_smt_present is only updated at boot time when SMT
siblings have been detected. Booting with maxcpus=1 and bringing the
siblings online after boot rebuilds the scheduling domains correctly but
does not update the static key, so the SMT code is not enabled.
Let the key be updated in the scheduler CPU hotplug code to fix this.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Clear current_kprobe and enable preemption in kprobe
even if pre_handler returns !0.
This simplifies function override using kprobes.
Jprobe used to require to keep the preemption disabled and
keep current_kprobe until it returned to original function
entry. For this reason kprobe_int3_handler() and similar
arch dependent kprobe handers checks pre_handler result
and exit without enabling preemption if the result is !0.
After removing the jprobe, Kprobes does not need to
keep preempt disabled even if user handler returns !0
anymore.
But since the function override handler in error-inject
and bpf is also returns !0 if it overrides a function,
to balancing the preempt count, it enables preemption
and reset current kprobe by itself.
That is a bad design that is very buggy. This fixes
such unbalanced preempt-count and current_kprobes setting
in kprobes, bpf and error-inject.
Note: for powerpc and x86, this removes all preempt_disable
from kprobe_ftrace_handler because ftrace callbacks are
called under preempt disabled.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: linux-arch@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-snps-arc@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: sparclinux@vger.kernel.org
Link: https://lore.kernel.org/lkml/152942494574.15209.12323837825873032258.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Don't check the ->break_handler() from the core kprobes code,
because it was only used by jprobes which got removed.
( In followup patches we'll remove the remaining calls in low level
arch handlers as well and remove the callback altogether. )
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-arch@vger.kernel.org
Link: https://lore.kernel.org/lkml/152942462686.15209.6324404940493598980.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull networking fixes from David Miller:
1) Fix crash on bpf_prog_load() errors, from Daniel Borkmann.
2) Fix ATM VCC memory accounting, from David Woodhouse.
3) fib6_info objects need RCU freeing, from Eric Dumazet.
4) Fix SO_BINDTODEVICE handling for TCP sockets, from David Ahern.
5) Fix clobbered error code in enic_open() failure path, from
Govindarajulu Varadarajan.
6) Propagate dev_get_valid_name() error returns properly, from Li
RongQing.
7) Fix suspend/resume in davinci_emac driver, from Bartosz Golaszewski.
8) Various act_ife fixes (recursive locking, IDR leaks, etc.) from
Davide Caratti.
9) Fix buggy checksum handling in sungem driver, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits)
ip: limit use of gso_size to udp
stmmac: fix DMA channel hang in half-duplex mode
net: stmmac: socfpga: add additional ocp reset line for Stratix10
net: sungem: fix rx checksum support
bpfilter: ignore binary files
bpfilter: fix build error
net/usb/drivers: Remove useless hrtimer_active check
net/sched: act_ife: preserve the action control in case of error
net/sched: act_ife: fix recursive lock and idr leak
net: ethernet: fix suspend/resume in davinci_emac
net: propagate dev_get_valid_name return code
enic: do not overwrite error code
net/tcp: Fix socket lookups with SO_BINDTODEVICE
ptp: replace getnstimeofday64() with ktime_get_real_ts64()
net/ipv6: respect rcu grace period before freeing fib6_info
net: net_failover: fix typo in net_failover_slave_register()
ipvlan: use ETH_MAX_MTU as max mtu
net: hamradio: use eth_broadcast_addr
enic: initialize enic->rfs_h.lock in enic_probe
MAINTAINERS: Add Sam as the maintainer for NCSI
...
Linus noted that swait basically implements exclusive mode -- because
swake_up() only wakes a single waiter. And because of that it should
take care to properly deal with the interruptible case.
In short, the problem is that swake_up() can race with a signal. In
this this case it is possible the swake_up() 'wakes' the waiter that
is already on the way out because it just got a signal and the wakeup
gets lost.
The normal wait code is very careful and avoids this situation, make
sure we do too.
Copy the exact exclusive semantics from wait.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: bigeasy@linutronix.de
Cc: oleg@redhat.com
Cc: paulmck@linux.vnet.ibm.com
Cc: pbonzini@redhat.com
Link: https://lkml.kernel.org/r/20180612083909.209762413@infradead.org
It was found that the use of up_read_non_owner() in NFS was causing
the following warning when DEBUG_RWSEMS was configured.
DEBUG_LOCKS_WARN_ON(sem->owner != ((struct task_struct *)(1UL << 0)))
Looking into the rwsem.c file, it was discovered that the corresponding
down_read_non_owner() function was not setting the owner field properly.
This is fixed now, and the warning should be gone.
Fixes: 5149cbac42 ("locking/rwsem: Add DEBUG_RWSEMS to look for lock/unlock mismatches")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Gavin Schenk <g.schenk@eckelmann.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-nfs@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1527168398-4291-1-git-send-email-longman@redhat.com
-----BEGIN PGP SIGNATURE-----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=PrOL
-----END PGP SIGNATURE-----
Merge tag 'dma-rename-4.18' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping rename from Christoph Hellwig:
"Move all the dma-mapping code to kernel/dma and lose their dma-*
prefixes"
* tag 'dma-rename-4.18' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: move all DMA mapping code to kernel/dma
dma-mapping: use obj-y instead of lib-y for generic dma ops
Remove comparison of audit_enabled to magic numbers outside of audit.
Related: https://github.com/linux-audit/audit-kernel/issues/86
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The AUDIT_FILTER_TYPE name is vague and misleading due to not describing
where or when the filter is applied and obsolete due to its available
filter fields having been expanded.
Userspace has already renamed it from AUDIT_FILTER_TYPE to
AUDIT_FILTER_EXCLUDE without checking if it already exists. The
userspace maintainer assures that as long as it is set to the same value
it will not be a problem since the userspace code does not treat
compiler warnings as errors. If this policy changes then checks if it
already exists can be added at the same time.
See: https://github.com/linux-audit/audit-kernel/issues/89
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The audit_filter_rules() function in auditsc.c used the in_[e]group_p()
functions to check GID/EGID match, but these functions use the current
task's credentials, while the comparison should use the credentials of
the task given to audit_filter_rules() as a parameter (tsk).
Note that we can use group_search(cred->group_info, ...) as a
replacement for both in_group_p and in_egroup_p as these functions only
compare the parameter to cred->fsgid/egid and then call group_search.
In fact, the usage of in_group_p was even more incorrect: it compares to
cred->fsgid (which is usually equal to cred->egid) and not cred->gid.
GitHub issue:
https://github.com/linux-audit/audit-kernel/issues/82
Fixes: 37eebe39c9 ("audit: improve GID/EGID comparation logic")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Since core dump events are triggered by user activity, tie the
ANOM_ABEND record to the syscall record to collect all records from the
same event.
See: https://github.com/linux-audit/audit-kernel/issues/88
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Since seccomp events are triggered by user activity, tie the SECCOMP
record to the syscall record to collect all records from the same event.
See: https://github.com/linux-audit/audit-kernel/issues/87
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch removes the restriction of the AUDIT_EXE field to only
SYSCALL filter and teaches audit_filter to recognize this field.
This makes it possible to write rule lists such as:
auditctl -a exit,always [some general rule]
# Filter out events with executable name /bin/exe1 or /bin/exe2:
auditctl -a exclude,always -F exe=/bin/exe1
auditctl -a exclude,always -F exe=/bin/exe2
See: https://github.com/linux-audit/audit-kernel/issues/54
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
get_monotonic_boottime() is deprecated because it uses the old 'timespec'
structure. This replaces one of the last callers with a call to
ktime_get_boottime.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: y2038@lists.linaro.org
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Link: https://lkml.kernel.org/r/20180618150114.849216-1-arnd@arndb.de
Some of the oddly named time accessor functions now have a more consistent
naming, which should be used from now on so the aliases can be removed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: y2038@lists.linaro.org
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lkml.kernel.org/r/20180618143246.3865099-1-arnd@arndb.de
The two do the same, this moves all users to the newer name for consistency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: y2038@lists.linaro.org
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Link: https://lkml.kernel.org/r/20180618140811.2998503-3-arnd@arndb.de
Both get_seconds() and do_gettimeofday() are deprecated. Change the time()
implementation to use the replacement function instead.
Obviously the system call will still overflow in 2038, but this gets us
closer to removing the old helper functions.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: y2038@lists.linaro.org
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/20180618140811.2998503-2-arnd@arndb.de
Commit b5793b0d92 added support for building the nanosleep compat system
call on 32-bit architectures, but missed one change in nanosleep_copyout(),
which would trigger a BUG() as soon as any architecture is switched over to
use it.
Use the proper config symbol to enable the code path.
Fixes: Commit b5793b0d92 ("posix-timers: Make compat syscalls depend on CONFIG_COMPAT_32BIT_TIME")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: y2038@lists.linaro.org
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20180618140811.2998503-1-arnd@arndb.de
When the comment was reflowed to a wider format, the "*" snuck in.
Fixes: ae88a23b32 ("irq: refactor and clean up the free_irq() code flow")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20180617124018.25539-1-j.neuschaefer@gmx.net
Jeremy Dorfman identified mutex contention when multiple threads
parse /proc/stat concurrently.
Since commit 425a5072dc ("genirq: Free irq_desc with rcu"),
kstat_irqs_usr() can be switched to rcu locking, which removes this mutex
contention.
show_interrupts() case will be handled in a separate patch.
Reported-by: Jeremy Dorfman <jdorfman@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Willem de Bruijn <willemb@google.com>
Link: https://lkml.kernel.org/r/20180618125612.155057-1-edumazet@google.com
Livepatch modules are special in that we preserve their entire symbol
tables in order to be able to apply relocations after module load. The
unwanted side effect of this is that undefined (SHN_UNDEF) symbols of
livepatch modules are accessible via the kallsyms api and this can
confuse symbol resolution in livepatch (klp_find_object_symbol()) and
cause subtle bugs in livepatch.
Have the module kallsyms api skip over SHN_UNDEF symbols. These symbols
are usually not available for normal modules anyway as we cut down their
symbol tables to just the core (non-undefined) symbols, so this should
really just affect livepatch modules. Note that this patch doesn't
affect the display of undefined symbols in /proc/kallsyms.
Reported-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2018-06-16
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a panic in devmap handling in generic XDP where return type
of __devmap_lookup_elem() got changed recently but generic XDP
code missed the related update, from Toshiaki.
2) Fix a freeze when BPF progs are loaded that include BPF to BPF
calls when JIT is enabled where we would later bail out via error
path w/o dropping kallsyms, and another one to silence syzkaller
splats from locking prog read-only, from Daniel.
3) Fix a bug in test_offloads.py BPF selftest which must not assume
that the underlying system have no BPF progs loaded prior to test,
and one in bpftool to fix accuracy of program load time, from Jakub.
4) Fix a bug in bpftool's probe for availability of the bpf(2)
BPF_TASK_FD_QUERY subcommand, from Yonghong.
5) Fix a regression in AF_XDP's XDP_SKB receive path where queue
id check got erroneously removed, from Björn.
6) Fix missing state cleanup in BPF's xfrm tunnel test, from William.
7) Check tunnel type more accurately in BPF's tunnel collect metadata
kselftest, from Jian.
8) Fix missing Kconfig fragments for BPF kselftests, from Anders.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- can.rst: fix a footnote reference;
- crypto_engine.rst: Fix two parsing warnings;
- Fix a lot of broken references to Documentation/*;
- Improves the scripts/documentation-file-ref-check script,
in order to help detecting/fixing broken references,
preventing false-positives.
After this patch series, only 33 broken references to doc files are
detected by scripts/documentation-file-ref-check.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJbJC2aAAoJEAhfPr2O5OEVPmMP/2rN5m9LZ048oRWlg4hCwo73
4FpWqDg18hbWCMHXYHIN1UACIMUkIUfgLhF7WE3D/XqRMuxHoiE5u7DUdak7+VNt
wunpksKFJbgyfFMHRvykHcZV+jQFVbM7eFvXVPIvoSaAeGH6zx4imHTyeDn3x/nL
gdtBqM4bvEhmBjotBTRR4PB8+oPrT/HIT5npHepx3UnFFFAzDQGEZ/I67/el2G5C
pVmYdBXvr7iqrvUs6FilHLTEfe1quCI4UaKNfLHKrxXrTkiJQFOwugYuobZfNmxT
GwjWzfpNy9HMlKJFYipcByALxel1Mnpqz5mIxFQaCTygBuEsORCWzW5MoKIsIUJ0
KOoG76v0rUyMvLBRvaoao3CHYHdzxhQbtVV9DjyDuDksa2G5IoCAF1t6DyIOitRw
9plMnGckk+FJ/MXJKYWXHszFS8NhI0SF2zHe3s1DmRTD8P6oxkxvxBFz6iqqADmL
W6XHd8CcqJItaS9ctPen91TFuysN1HFpdzLLY+xwWmmKOcWC/jFjhTm8pj7xLQHM
5yuuEcefsajf+Xk4w2fSQmRfXnuq+oOlPuWpwSvEy+59cHGI0ms18P1nHy/yt3II
CJywwdx6fjwDon57RFKH7kkGd7px317zMqWdIv9gUj/qZAy9gcdLdvEQLhx9u0aV
4F+hLKFDFEpf58xqRT1R
=/ozx
-----END PGP SIGNATURE-----
Merge tag 'docs-broken-links' of git://linuxtv.org/mchehab/experimental
Pull documentation fixes from Mauro Carvalho Chehab:
"This solves a series of broken links for files under Documentation,
and improves a script meant to detect such broken links (see
scripts/documentation-file-ref-check).
The changes on this series are:
- can.rst: fix a footnote reference;
- crypto_engine.rst: Fix two parsing warnings;
- Fix a lot of broken references to Documentation/*;
- improve the scripts/documentation-file-ref-check script, in order
to help detecting/fixing broken references, preventing
false-positives.
After this patch series, only 33 broken references to doc files are
detected by scripts/documentation-file-ref-check"
* tag 'docs-broken-links' of git://linuxtv.org/mchehab/experimental: (26 commits)
fix a series of Documentation/ broken file name references
Documentation: rstFlatTable.py: fix a broken reference
ABI: sysfs-devices-system-cpu: remove a broken reference
devicetree: fix a series of wrong file references
devicetree: fix name of pinctrl-bindings.txt
devicetree: fix some bindings file names
MAINTAINERS: fix location of DT npcm files
MAINTAINERS: fix location of some display DT bindings
kernel-parameters.txt: fix pointers to sound parameters
bindings: nvmem/zii: Fix location of nvmem.txt
docs: Fix more broken references
scripts/documentation-file-ref-check: check tools/*/Documentation
scripts/documentation-file-ref-check: get rid of false-positives
scripts/documentation-file-ref-check: hint: dash or underline
scripts/documentation-file-ref-check: add a fix logic for DT
scripts/documentation-file-ref-check: accept more wildcards at filenames
scripts/documentation-file-ref-check: fix help message
media: max2175: fix location of driver's companion documentation
media: v4l: fix broken video4linux docs locations
media: dvb: point to the location of the old README.dvb-usb file
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAlsielwACgkQnJ2qBz9k
QNlN0Af/Q82iP3EqrT3w+CT7w0gER2su+Df2riDpo0/XYRQLxuyW+kYtLsQwovvB
Q7Tt+WTSO5OIqoJxwGMmd6VO5ICblhP+uHVC6+JlWy17DgccjwFBE/sUopxPqJaK
9utwXZhqqOEoikNpDABcptNnWVILRl0yppkQrVV/pKkyZFp2F8vO4roUHFFYkJJt
/uXJfLDQx6pBLTwqfQBFyiz0dCSsvCHUVnlw7Hu5JfE6xPtkMlk6F/M0Y0rvyEOg
8KmH5jUX/BXKIijg+ycOzS3CCdvm0UhrtiH5YWy4qGaI8eczT31Epfl08Sk8pvkv
n2rnxNnJP5sjPPNQhXvHJqy9qRCB6g==
=bLjN
-----END PGP SIGNATURE-----
Merge tag 'fsnotify_for_v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"fsnotify cleanups unifying handling of different watch types.
This is the shortened fsnotify series from Amir with the last five
patches pulled out. Amir has modified those patches to not change
struct inode but obviously it's too late for those to go into this
merge window"
* tag 'fsnotify_for_v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: add fsnotify_add_inode_mark() wrappers
fanotify: generalize fanotify_should_send_event()
fsnotify: generalize send_to_group()
fsnotify: generalize iteration of marks by object type
fsnotify: introduce marks iteration helpers
fsnotify: remove redundant arguments to handle_event()
fsnotify: use type id to identify connector object type
Pull networking fixes from David Miller:
1) Various netfilter fixlets from Pablo and the netfilter team.
2) Fix regression in IPVS caused by lack of PMTU exceptions on local
routes in ipv6, from Julian Anastasov.
3) Check pskb_trim_rcsum for failure in DSA, from Zhouyang Jia.
4) Don't crash on poll in TLS, from Daniel Borkmann.
5) Revert SO_REUSE{ADDR,PORT} change, it regresses various things
including Avahi mDNS. From Bart Van Assche.
6) Missing of_node_put in qcom/emac driver, from Yue Haibing.
7) We lack checking of the TCP checking in one special case during SYN
receive, from Frank van der Linden.
8) Fix module init error paths of mac80211 hwsim, from Johannes Berg.
9) Handle 802.1ad properly in stmmac driver, from Elad Nachman.
10) Must grab HW caps before doing quirk checks in stmmac driver, from
Jose Abreu.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits)
net: stmmac: Run HWIF Quirks after getting HW caps
neighbour: skip NTF_EXT_LEARNED entries during forced gc
net: cxgb3: add error handling for sysfs_create_group
tls: fix waitall behavior in tls_sw_recvmsg
tls: fix use-after-free in tls_push_record
l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl()
l2tp: reject creation of non-PPP sessions on L2TPv2 tunnels
mlxsw: spectrum_switchdev: Fix port_vlan refcounting
mlxsw: spectrum_router: Align with new route replace logic
mlxsw: spectrum_router: Allow appending to dev-only routes
ipv6: Only emit append events for appended routes
stmmac: added support for 802.1ad vlan stripping
cfg80211: fix rcu in cfg80211_unregister_wdev
mac80211: Move up init of TXQs
mac80211_hwsim: fix module init error paths
cfg80211: initialize sinfo in cfg80211_get_station
nl80211: fix some kernel doc tag mistakes
hv_netvsc: Fix the variable sizes in ipsecv2 and rsc offload
rds: avoid unenecessary cong_update in loop transport
l2tp: clean up stale tunnel or session in pppol2tp_connect's error path
...
Summary of modules changes for the 4.18 merge window:
- Minor code cleanup and also allow sig_enforce param to be shown in
sysfs with CONFIG_MODULE_SIG_FORCE
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=5gpe
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"Minor code cleanup and also allow sig_enforce param to be shown in
sysfs with CONFIG_MODULE_SIG_FORCE"
* tag 'modules-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Allow to always show the status of modsign
module: Do not access sig_enforce directly
Commit 67f29e07e1 ("bpf: devmap introduce dev_map_enqueue") changed
the return value type of __devmap_lookup_elem() from struct net_device *
to struct bpf_dtab_netdev * but forgot to modify generic XDP code
accordingly.
Thus generic XDP incorrectly used struct bpf_dtab_netdev where struct
net_device is expected, then skb->dev was set to invalid value.
v2:
- Fix compiler warning without CONFIG_BPF_SYSCALL.
Fixes: 67f29e07e1 ("bpf: devmap introduce dev_map_enqueue")
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
As files move around, their previous links break. Fix the
references for them.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
As we move stuff around, some doc references are broken. Fix some of
them via this script:
./scripts/documentation-file-ref-check --fix
Manually checked if the produced result is valid, removing a few
false-positives.
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
We currently lock any JITed image as read-only via bpf_jit_binary_lock_ro()
as well as the BPF image as read-only through bpf_prog_lock_ro(). In
the case any of these would fail we throw a WARN_ON_ONCE() in order to
yell loudly to the log. Perhaps, to some extend, this may be comparable
to an allocation where __GFP_NOWARN is explicitly not set.
Added via 65869a47f3 ("bpf: improve read-only handling"), this behavior
is slightly different compared to any of the other in-kernel set_memory_ro()
users who do not check the return code of set_memory_ro() and friends /at
all/ (e.g. in the case of module_enable_ro() / module_disable_ro()). Given
in BPF this is mandatory hardening step, we want to know whether there
are any issues that would leave both BPF data writable. So it happens
that syzkaller enabled fault injection and it triggered memory allocation
failure deep inside x86's change_page_attr_set_clr() which was triggered
from set_memory_ro().
Now, there are two options: i) leaving everything as is, and ii) reworking
the image locking code in order to have a final checkpoint out of the
central bpf_prog_select_runtime() which probes whether any of the calls
during prog setup weren't successful, and then bailing out with an error.
Option ii) is a better approach since this additional paranoia avoids
altogether leaving any potential W+X pages from BPF side in the system.
Therefore, lets be strict about it, and reject programs in such unlikely
occasion. While testing I noticed also that one bpf_prog_lock_ro()
call was missing on the outer dummy prog in case of calls, e.g. in the
destructor we call bpf_prog_free_deferred() on the main prog where we
try to bpf_prog_unlock_free() the program, and since we go via
bpf_prog_select_runtime() do that as well.
Reported-by: syzbot+3b889862e65a98317058@syzkaller.appspotmail.com
Reported-by: syzbot+9e762b52dd17e616a7a5@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
While testing I found that when hitting error path in bpf_prog_load()
where we jump to free_used_maps and prog contained BPF to BPF calls
that were JITed earlier, then we never clean up the bpf_prog_kallsyms_add()
done under jit_subprogs(). Add proper API to make BPF kallsyms deletion
more clear and fix that.
Fixes: 1c2a088a66 ("bpf: x64: add JIT support for multi-function programs")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Merge more updates from Andrew Morton:
- MM remainders
- various misc things
- kcov updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (27 commits)
lib/test_printf.c: call wait_for_random_bytes() before plain %p tests
hexagon: drop the unused variable zero_page_mask
hexagon: fix printk format warning in setup.c
mm: fix oom_kill event handling
treewide: use PHYS_ADDR_MAX to avoid type casting ULLONG_MAX
mm: use octal not symbolic permissions
ipc: use new return type vm_fault_t
sysvipc/sem: mitigate semnum index against spectre v1
fault-injection: reorder config entries
arm: port KCOV to arm
sched/core / kcov: avoid kcov_area during task switch
kcov: prefault the kcov_area
kcov: ensure irq code sees a valid area
kernel/relay.c: change return type to vm_fault_t
exofs: avoid VLA in structures
coredump: fix spam with zero VMA process
fat: use fat_fs_error() instead of BUG_ON() in __fat_get_block()
proc: skip branch in /proc/*/* lookup
mremap: remove LATENCY_LIMIT from mremap to reduce the number of TLB shootdowns
mm/memblock: add missing include <linux/bootmem.h>
...
During a context switch, we first switch_mm() to the next task's mm,
then switch_to() that new task. This means that vmalloc'd regions which
had previously been faulted in can transiently disappear in the context
of the prev task.
Functions instrumented by KCOV may try to access a vmalloc'd kcov_area
during this window, and as the fault handling code is instrumented, this
results in a recursive fault.
We must avoid accessing any kcov_area during this window. We can do so
with a new flag in kcov_mode, set prior to switching the mm, and cleared
once the new task is live. Since task_struct::kcov_mode isn't always a
specific enum kcov_mode value, this is made an unsigned int.
The manipulation is hidden behind kcov_{prepare,finish}_switch() helpers,
which are empty for !CONFIG_KCOV kernels.
The code uses macros because I can't use static inline functions without a
circular include dependency between <linux/sched.h> and <linux/kcov.h>,
since the definition of task_struct uses things defined in <linux/kcov.h>
Link: http://lkml.kernel.org/r/20180504135535.53744-4-mark.rutland@arm.com
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On many architectures the vmalloc area is lazily faulted in upon first
access. This is problematic for KCOV, as __sanitizer_cov_trace_pc
accesses the (vmalloc'd) kcov_area, and fault handling code may be
instrumented. If an access to kcov_area faults, this will result in
mutual recursion through the fault handling code and
__sanitizer_cov_trace_pc(), eventually leading to stack corruption
and/or overflow.
We can avoid this by faulting in the kcov_area before
__sanitizer_cov_trace_pc() is permitted to access it. Once it has been
faulted in, it will remain present in the process page tables, and will
not fault again.
[akpm@linux-foundation.org: code cleanup]
[akpm@linux-foundation.org: add comment explaining kcov_fault_in_area()]
[akpm@linux-foundation.org: fancier code comment from Mark]
Link: http://lkml.kernel.org/r/20180504135535.53744-3-mark.rutland@arm.com
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "kcov: fix unexpected faults".
These patches fix a few issues where KCOV code could trigger recursive
faults, discovered while debugging a patch enabling KCOV for arch/arm:
* On CONFIG_PREEMPT kernels, there's a small race window where
__sanitizer_cov_trace_pc() can see a bogus kcov_area.
* Lazy faulting of the vmalloc area can cause mutual recursion between
fault handling code and __sanitizer_cov_trace_pc().
* During the context switch, switching the mm can cause the kcov_area to
be transiently unmapped.
These are prerequisites for enabling KCOV on arm, but the issues
themsevles are generic -- we just happen to avoid them by chance rather
than design on x86-64 and arm64.
This patch (of 3):
For kernels built with CONFIG_PREEMPT, some C code may execute before or
after the interrupt handler, while the hardirq count is zero. In these
cases, in_task() can return true.
A task can be interrupted in the middle of a KCOV_DISABLE ioctl while it
resets the task's kcov data via kcov_task_init(). Instrumented code
executed during this period will call __sanitizer_cov_trace_pc(), and as
in_task() returns true, will inspect t->kcov_mode before trying to write
to t->kcov_area.
In kcov_init_task() we update t->kcov_{mode,area,size} with plain stores,
which may be re-ordered, torn, etc. Thus __sanitizer_cov_trace_pc() may
see bogus values for any of these fields, and may attempt to write to
memory which is not mapped.
Let's avoid this by using WRITE_ONCE() to set t->kcov_mode, with a
barrier() to ensure this is ordered before we clear t->kov_{area,size}.
This ensures that any code execute while kcov_init_task() is preempted
will either see valid values for t->kcov_{area,size}, or will see that
t->kcov_mode is KCOV_MODE_DISABLED, and bail out without touching
t->kcov_area.
Link: http://lkml.kernel.org/r/20180504135535.53744-2-mark.rutland@arm.com
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use new return type vm_fault_t for fault handler. For now, this is just
documenting that the function returns a VM_FAULT value rather than an
errno. Once all instances are converted, vm_fault_t will become a
distinct type.
commit 1c8f422059 ("mm: change return type to vm_fault_t")
Link: http://lkml.kernel.org/r/20180510140335.GA25363@jordon-HP-15-Notebook-PC
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As a theoretical problem, dup_mmap() of an mm_struct with 60000+ vmas
can loop while potentially allocating memory, with mm->mmap_sem held for
write by current thread. This is bad if current thread was selected as
an OOM victim, for current thread will continue allocations using memory
reserves while OOM reaper is unable to reclaim memory.
As an actually observable problem, it is not difficult to make OOM
reaper unable to reclaim memory if the OOM victim is blocked at
i_mmap_lock_write() in this loop. Unfortunately, since nobody can
explain whether it is safe to use killable wait there, let's check for
SIGKILL before trying to allocate memory. Even without an OOM event,
there is no point with continuing the loop from the beginning if current
thread is killed.
I tested with debug printk(). This patch should be safe because we
already fail if security_vm_enough_memory_mm() or
kmem_cache_alloc(GFP_KERNEL) fails and exit_mmap() handles it.
***** Aborting dup_mmap() due to SIGKILL *****
***** Aborting dup_mmap() due to SIGKILL *****
***** Aborting dup_mmap() due to SIGKILL *****
***** Aborting dup_mmap() due to SIGKILL *****
***** Aborting exit_mmap() due to NULL mmap *****
[akpm@linux-foundation.org: add comment]
Link: http://lkml.kernel.org/r/201804071938.CDE04681.SOFVQJFtMHOOLF@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Rik van Riel <riel@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Without yielding while loading kimage segments, a large initrd will
block all other work on the CPU performing the load until it is
completed. For example loading an initrd of 200MB on a low power single
core system will lock up the system for a few seconds.
To increase system responsiveness to other tasks at that time, call
cond_resched() in both the crash kernel and normal kernel segment
loading loops.
I did run into a practical problem. Hardware watchdogs on embedded
systems can have short timers on the order of seconds. If the system is
locked up for a few seconds with only a single core available, the
watchdog may not be pet in a timely fashion. If this happens, the
hardware watchdog will fire and reset the system.
This really only becomes a problem when you are working with a single
core, a decently sized initrd, and have a constrained hardware watchdog.
Link: http://lkml.kernel.org/r/1528738546-3328-1-git-send-email-jmf@amazon.com
Signed-off-by: Jarrett Farnitano <jmf@amazon.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Prior to commit 2a61f4747e ("stack-protector: test compiler capability
in Kconfig and drop AUTO mode"), the stack protector was configured by
the choice of NONE, REGULAR, STRONG, AUTO.
tiny.config needed to explicitly set NONE because the default value of
choice, AUTO, did not produce the tiniest kernel.
Now that there are only two boolean symbols, STACKPROTECTOR and
STACKPROTECTOR_STRONG, they are naturally disabled by "make
allnoconfig", which "make tinyconfig" is based on. Remove unnecessary
lines from the tiny.config fragment file.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently the code is split over various files with dma- prefixes in the
lib/ and drives/base directories, and the number of files keeps growing.
Move them into a single directory to keep the code together and remove
the file name prefixes. To match the irq infrastructure this directory
is placed under the kernel/ directory.
Signed-off-by: Christoph Hellwig <hch@lst.de>
The changes to automatically test for working stack protector compiler
support in the Kconfig files removed the special STACKPROTECTOR_AUTO
option that picked the strongest stack protector that the compiler
supported.
That was all a nice cleanup - it makes no sense to have the AUTO case
now that the Kconfig phase can just determine the compiler support
directly.
HOWEVER.
It also meant that doing "make oldconfig" would now _disable_ the strong
stackprotector if you had AUTO enabled, because in a legacy config file,
the sane stack protector configuration would look like
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_NONE is not set
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_CC_STACKPROTECTOR_AUTO=y
and when you ran this through "make oldconfig" with the Kbuild changes,
it would ask you about the regular CONFIG_CC_STACKPROTECTOR (that had
been renamed from CONFIG_CC_STACKPROTECTOR_REGULAR to just
CONFIG_CC_STACKPROTECTOR), but it would think that the STRONG version
used to be disabled (because it was really enabled by AUTO), and would
disable it in the new config, resulting in:
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
That's dangerously subtle - people could suddenly find themselves with
the weaker stack protector setup without even realizing.
The solution here is to just rename not just the old RECULAR stack
protector option, but also the strong one. This does that by just
removing the CC_ prefix entirely for the user choices, because it really
is not about the compiler support (the compiler support now instead
automatially impacts _visibility_ of the options to users).
This results in "make oldconfig" actually asking the user for their
choice, so that we don't have any silent subtle security model changes.
The end result would generally look like this:
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
where the "CC_" versions really are about internal compiler
infrastructure, not the user selections.
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- fix some bugs introduced by the recent Kconfig syntax extension
- add some symbols about compiler information in Kconfig, such as
CC_IS_GCC, CC_IS_CLANG, GCC_VERSION, etc.
- test compiler capability for the stack protector in Kconfig, and
clean-up Makefile
- test compiler capability for GCC-plugins in Kconfig, and clean-up
Makefile
- allow to enable GCC-plugins for COMPILE_TEST
- test compiler capability for KCOV in Kconfig and correct dependency
- remove auto-detect mode of the GCOV format, which is now more nicely
handled in Kconfig
- test compiler capability for mprofile-kernel on PowerPC, and
clean-up Makefile
- misc cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=VABv
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix some bugs introduced by the recent Kconfig syntax extension
- add some symbols about compiler information in Kconfig, such as
CC_IS_GCC, CC_IS_CLANG, GCC_VERSION, etc.
- test compiler capability for the stack protector in Kconfig, and
clean-up Makefile
- test compiler capability for GCC-plugins in Kconfig, and clean-up
Makefile
- allow to enable GCC-plugins for COMPILE_TEST
- test compiler capability for KCOV in Kconfig and correct dependency
- remove auto-detect mode of the GCOV format, which is now more nicely
handled in Kconfig
- test compiler capability for mprofile-kernel on PowerPC, and clean-up
Makefile
- misc cleanups
* tag 'kbuild-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
linux/linkage.h: replace VMLINUX_SYMBOL_STR() with __stringify()
kconfig: fix localmodconfig
sh: remove no-op macro VMLINUX_SYMBOL()
powerpc/kbuild: move -mprofile-kernel check to Kconfig
Documentation: kconfig: add recommended way to describe compiler support
gcc-plugins: disable GCC_PLUGIN_STRUCTLEAK_BYREF_ALL for COMPILE_TEST
gcc-plugins: allow to enable GCC_PLUGINS for COMPILE_TEST
gcc-plugins: test plugin support in Kconfig and clean up Makefile
gcc-plugins: move GCC version check for PowerPC to Kconfig
kcov: test compiler capability in Kconfig and correct dependency
gcov: remove CONFIG_GCOV_FORMAT_AUTODETECT
arm64: move GCC version check for ARCH_SUPPORTS_INT128 to Kconfig
kconfig: add CC_IS_CLANG and CLANG_VERSION
kconfig: add CC_IS_GCC and GCC_VERSION
stack-protector: test compiler capability in Kconfig and drop AUTO mode
kbuild: fix endless syncconfig in case arch Makefile sets CROSS_COMPILE
The lockdep_assert_irqs_disabled() was a BUG_ON() statement in the
beginning and it was added just before the "spin_lock(siglock)"
statement to ensure this lock was taken with disabled interrupts.
This is no longer the case: the siglock is acquired via
lock_task_sighand() and this function already disables the interrupts.
The lock is also acquired before this "lockdep_assert_irqs_disabled" so
it is best to remove it.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r20180504152548.7166-1-bigeasy@linutronix.de
Daniel Borkmann says:
====================
pull-request: bpf 2018-06-12
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Avoid an allocation warning in AF_XDP by adding __GFP_NOWARN for the
umem setup, from Björn.
2) Silence a warning in bpf fs when an application tries to open(2) a
pinned bpf obj due to missing fops. Add a dummy open fop that continues
to just bail out in such case, from Daniel.
3) Fix a BPF selftest urandom_read build issue where gcc complains that
it gets built twice, from Anders.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix several bpfilter/UMH bugs, in particular make the UMH build not
depend upon X86 specific Kconfig symbols. From Alexei Starovoitov.
2) Fix handling of modified context pointer in bpf verifier, from
Daniel Borkmann.
3) Kill regression in ifdown/ifup sequences for hv_netvsc driver, from
Dexuan Cui.
4) When the bonding primary member name changes, we have to re-evaluate
the bond->force_primary setting, from Xiangning Yu.
5) Eliminate possible padding beyone end of SKB in cdc_ncm driver, from
Bjørn Mork.
6) RX queue length reported for UDP sockets in procfs and socket diag
are inaccurate, from Paolo Abeni.
7) Fix br_fdb_find_port() locking, from Petr Machata.
8) Limit sk_rcvlowat values properly in TCP, from Soheil Hassas
Yeganeh.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (23 commits)
tcp: limit sk_rcvlowat by the maximum receive buffer
net: phy: dp83822: use BMCR_ANENABLE instead of BMSR_ANEGCAPABLE for DP83620
socket: close race condition between sock_close() and sockfs_setattr()
net: bridge: Fix locking in br_fdb_find_port()
udp: fix rx queue len reported by diag and proc interface
cdc_ncm: avoid padding beyond end of skb
net/sched: act_simple: fix parsing of TCA_DEF_DATA
net: fddi: fix a possible null-ptr-deref
net: aquantia: fix unsigned numvecs comparison with less than zero
net: stmmac: fix build failure due to missing COMMON_CLK dependency
bpfilter: fix race in pipe access
bpf, xdp: fix crash in xdp_umem_unaccount_pages
xsk: Fix umem fill/completion queue mmap on 32-bit
tools/bpf: fix selftest get_cgroup_id_user
bpfilter: fix OUTPUT_FORMAT
umh: fix race condition
net: mscc: ocelot: Fix uninitialized error in ocelot_netdevice_event()
bonding: re-evaluate force_primary when the primary slave name changes
ip_tunnel: Fix name string concatenate in __ip_tunnel_create()
hv_netvsc: Fix a network regression after ifdown/ifup
...
This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc,
xfcp, hisi_sas, cxlflash, qla2xxx. In the absence of Nic, we're also
taking target updates which are mostly minor except for the tcmu
refactor. The only real core change to worry about is the removal of
high page bouncing (in sas, storvsc and iscsi). This has been well
tested and no problems have shown up so far.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCWx1pbCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishUucAP42pccS
ziKyiOizuxv9fZ4Q+nXd1A9zhI5tqqpkHjcQegEA40qiZSi3EKGKR8W0UpX7Ntmo
tqrZJGojx9lnrAM2RbQ=
=NMXg
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc,
xfcp, hisi_sas, cxlflash, qla2xxx.
In the absence of Nic, we're also taking target updates which are
mostly minor except for the tcmu refactor.
The only real core change to worry about is the removal of high page
bouncing (in sas, storvsc and iscsi). This has been well tested and no
problems have shown up so far"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (268 commits)
scsi: lpfc: update driver version to 12.0.0.4
scsi: lpfc: Fix port initialization failure.
scsi: lpfc: Fix 16gb hbas failing cq create.
scsi: lpfc: Fix crash in blk_mq layer when executing modprobe -r lpfc
scsi: lpfc: correct oversubscription of nvme io requests for an adapter
scsi: lpfc: Fix MDS diagnostics failure (Rx < Tx)
scsi: hisi_sas: Mark PHY as in reset for nexus reset
scsi: hisi_sas: Fix return value when get_free_slot() failed
scsi: hisi_sas: Terminate STP reject quickly for v2 hw
scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command
scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot
scsi: hisi_sas: Try wait commands before before controller reset
scsi: hisi_sas: Init disks after controller reset
scsi: hisi_sas: Create a scsi_host_template per HW module
scsi: hisi_sas: Reset disks when discovered
scsi: hisi_sas: Add LED feature for v3 hw
scsi: hisi_sas: Change common allocation mode of device id
scsi: hisi_sas: change slot index allocation mode
scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate()
scsi: hisi_sas: fix a typo in hisi_sas_task_prep()
...
Pull restartable sequence support from Thomas Gleixner:
"The restartable sequences syscall (finally):
After a lot of back and forth discussion and massive delays caused by
the speculative distraction of maintainers, the core set of
restartable sequences has finally reached a consensus.
It comes with the basic non disputed core implementation along with
support for arm, powerpc and x86 and a full set of selftests
It was exposed to linux-next earlier this week, so it does not fully
comply with the merge window requirements, but there is really no
point to drag it out for yet another cycle"
* 'core-rseq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq/selftests: Provide Makefile, scripts, gitignore
rseq/selftests: Provide parametrized tests
rseq/selftests: Provide basic percpu ops test
rseq/selftests: Provide basic test
rseq/selftests: Provide rseq library
selftests/lib.mk: Introduce OVERRIDE_TARGETS
powerpc: Wire up restartable sequences system call
powerpc: Add syscall detection for restartable sequences
powerpc: Add support for restartable sequences
x86: Wire up restartable sequence system call
x86: Add support for restartable sequences
arm: Wire up restartable sequences system call
arm: Add syscall detection for restartable sequences
arm: Add restartable sequences support
rseq: Introduce restartable sequences system call
uapi/headers: Provide types_32_64.h
Pull x86 updates and fixes from Thomas Gleixner:
- Fix the (late) fallout from the vector management rework causing
hlist corruption and irq descriptor reference leaks caused by a
missing sanity check.
The straight forward fix triggered another long standing issue to
surface. The pre rework code hid the issue due to being way slower,
but now the chance that user space sees an EBUSY error return when
updating irq affinities is way higher, though quite a bunch of
userspace tools do not handle it properly despite the fact that EBUSY
could be returned for at least 10 years.
It turned out that the EBUSY return can be avoided completely by
utilizing the existing delayed affinity update mechanism for irq
remapped scenarios as well. That's a bit more error handling in the
kernel, but avoids fruitless fingerpointing discussions with tool
developers.
- Decouple PHYSICAL_MASK from AMD SME as its going to be required for
the upcoming Intel memory encryption support as well.
- Handle legacy device ACPI detection properly for newer platforms
- Fix the wrong argument ordering in the vector allocation tracepoint
- Simplify the IDT setup code for the APIC=n case
- Use the proper string helpers in the MTRR code
- Remove a stale unused VDSO source file
- Convert the microcode update lock to a raw spinlock as its used in
atomic context.
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/intel_rdt: Enable CMT and MBM on new Skylake stepping
x86/apic/vector: Print APIC control bits in debugfs
genirq/affinity: Defer affinity setting if irq chip is busy
x86/platform/uv: Use apic_ack_irq()
x86/ioapic: Use apic_ack_irq()
irq_remapping: Use apic_ack_irq()
x86/apic: Provide apic_ack_irq()
genirq/migration: Avoid out of line call if pending is not set
genirq/generic_pending: Do not lose pending affinity update
x86/apic/vector: Prevent hlist corruption and leaks
x86/vector: Fix the args of vector_alloc tracepoint
x86/idt: Simplify the idt_setup_apic_and_irq_gates()
x86/platform/uv: Remove extra parentheses
x86/mm: Decouple dynamic __PHYSICAL_MASK from AMD SME
x86: Mark native_set_p4d() as __always_inline
x86/microcode: Make the late update update_lock a raw lock for RT
x86/mtrr: Convert to use strncpy_from_user() helper
x86/mtrr: Convert to use match_string() helper
x86/vdso: Remove unused file
x86/i8237: Register device based on FADT legacy boot flag
Pull core fixes from Thomas Gleixner:
"A small set of core updates:
- Make objtool cope with GCC8 oddities some more
- Remove a stale local_irq_save/restore sequence in the signal code
along with the stale comment in the RCU code. The underlying issue
which led to this has been solved long time ago, but nobody cared
to cleanup the hackarounds"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
signal: Remove no longer required irqsave/restore
rcu: Update documentation of rcu_read_unlock()
objtool: Fix GCC 8 cold subfunction detection for aliased functions
Commit a841796f11 ("signal: align __lock_task_sighand() irq disabling and
RCU") introduced a rcu read side critical section with interrupts
disabled. The changelog suggested that a better long-term fix would be "to
make rt_mutex_unlock() disable irqs when acquiring the rt_mutex structure's
->wait_lock".
This long-term fix has been made in commit b4abf91047 ("rtmutex: Make
wait_lock irq safe") for a different reason.
Therefore revert commit a841796f11 ("signal: align >
__lock_task_sighand() irq disabling and RCU") as the interrupt disable
dance is not longer required.
The change was tested on the base of b4abf91047 ("rtmutex: Make wait_lock
irq safe") with a four hour run of rcutorture scenario TREE03 with lockdep
enabled as suggested by Paul McKenney.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: bigeasy@linutronix.de
Link: https://lkml.kernel.org/r/20180525090507.22248-3-anna-maria@linutronix.de
Pull IDE updates from David Miller:
"Primarily IRQ disabling avoidance changes from Sebastian Andrzej
Siewior"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
ide: don't enable/disable interrupts in force threaded-IRQ mode
ide: don't disable interrupts during kmap_atomic()
ide: Handle irq disabling consistently
alim15x3: move irq-restore before pci_dev_put()
* DAX broke a fundamental assumption of truncate of file mapped pages.
The truncate path assumed that it is safe to disconnect a pinned page
from a file and let the filesystem reclaim the physical block. With DAX
the page is equivalent to the filesystem block. Introduce
dax_layout_busy_page() to enable filesystems to wait for pinned DAX
pages to be released. Without this wait a filesystem could allocate
blocks under active device-DMA to a new file.
* DAX arranges for the block layer to be bypassed and uses
dax_direct_access() + copy_to_iter() to satisfy read(2) calls.
However, the memcpy_mcsafe() facility is available through the pmem
block driver. In order to safely handle media errors, via the DAX
block-layer bypass, introduce copy_to_iter_mcsafe().
* Fix cache management policy relative to the ACPI NFIT Platform
Capabilities Structure to properly elide cache flushes when they are not
necessary. The table indicates whether CPU caches are power-fail
protected. Clarify that a deep flush is always performed on
REQ_{FUA,PREFLUSH} requests.
-----BEGIN PGP SIGNATURE-----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=4bfw
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"This adds a user for the new 'bytes-remaining' updates to
memcpy_mcsafe() that you already received through Ingo via the
x86-dax- for-linus pull.
Not included here, but still targeting this cycle, is support for
handling memory media errors (poison) consumed via userspace dax
mappings.
Summary:
- DAX broke a fundamental assumption of truncate of file mapped
pages. The truncate path assumed that it is safe to disconnect a
pinned page from a file and let the filesystem reclaim the physical
block. With DAX the page is equivalent to the filesystem block.
Introduce dax_layout_busy_page() to enable filesystems to wait for
pinned DAX pages to be released. Without this wait a filesystem
could allocate blocks under active device-DMA to a new file.
- DAX arranges for the block layer to be bypassed and uses
dax_direct_access() + copy_to_iter() to satisfy read(2) calls.
However, the memcpy_mcsafe() facility is available through the pmem
block driver. In order to safely handle media errors, via the DAX
block-layer bypass, introduce copy_to_iter_mcsafe().
- Fix cache management policy relative to the ACPI NFIT Platform
Capabilities Structure to properly elide cache flushes when they
are not necessary. The table indicates whether CPU caches are
power-fail protected. Clarify that a deep flush is always performed
on REQ_{FUA,PREFLUSH} requests"
* tag 'libnvdimm-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits)
dax: Use dax_write_cache* helpers
libnvdimm, pmem: Do not flush power-fail protected CPU caches
libnvdimm, pmem: Unconditionally deep flush on *sync
libnvdimm, pmem: Complete REQ_FLUSH => REQ_PREFLUSH
acpi, nfit: Remove ecc_unit_size
dax: dax_insert_mapping_entry always succeeds
libnvdimm, e820: Register all pmem resources
libnvdimm: Debug probe times
linvdimm, pmem: Preserve read-only setting for pmem devices
x86, nfit_test: Add unit test for memcpy_mcsafe()
pmem: Switch to copy_to_iter_mcsafe()
dax: Report bytes remaining in dax_iomap_actor()
dax: Introduce a ->copy_to_iter dax operation
uio, lib: Fix CONFIG_ARCH_HAS_UACCESS_MCSAFE compilation
xfs, dax: introduce xfs_break_dax_layouts()
xfs: prepare xfs_break_layouts() for another layout type
xfs: prepare xfs_break_layouts() to be called with XFS_MMAPLOCK_EXCL
mm, fs, dax: handle layout changes to pinned dax mappings
mm: fix __gup_device_huge vs unmap
mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS
...
syzkaller was able to trigger the following warning in
do_dentry_open():
WARNING: CPU: 1 PID: 4508 at fs/open.c:778 do_dentry_open+0x4ad/0xe40 fs/open.c:778
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 4508 Comm: syz-executor867 Not tainted 4.17.0+ #90
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
[...]
vfs_open+0x139/0x230 fs/open.c:908
do_last fs/namei.c:3370 [inline]
path_openat+0x1717/0x4dc0 fs/namei.c:3511
do_filp_open+0x249/0x350 fs/namei.c:3545
do_sys_open+0x56f/0x740 fs/open.c:1101
__do_sys_openat fs/open.c:1128 [inline]
__se_sys_openat fs/open.c:1122 [inline]
__x64_sys_openat+0x9d/0x100 fs/open.c:1122
do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Problem was that prog and map inodes in bpf fs did not
implement a dummy file open operation that would return an
error. The patch in do_dentry_open() checks whether f_ops
are present and if not bails out with an error. While this
may be fine, we really shouldn't be throwing a warning
though. Thus follow the model similar to bad_file_ops and
reject the request unconditionally with -EIO.
Fixes: b2197755b2 ("bpf: add support for persistent maps/progs")
Reported-by: syzbot+2e7fcab0f56fdbb330b8@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
CONFIG_GCOV_FORMAT_AUTODETECT compiles either gcc_3_4.c or gcc_4_7.c
according to your GCC version.
We can achieve the equivalent behavior by setting reasonable dependency
with the knowledge of the compiler version.
If GCC older than 4.7 is used, GCOV_FORMAT_3_4 is the default, but users
are still allowed to select GCOV_FORMAT_4_7 in case the newer format is
back-ported.
On the other hand, If GCC 4.7 or newer is used, there is no reason to
use GCOV_FORMAT_3_4, so it should be hidden.
If you downgrade the compiler to GCC 4.7 or older, oldconfig/syncconfig
will display a prompt for the choice because GCOV_FORMAT_3_4 becomes
visible as a new symbol.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
When we get a hung task it can often be valuable to see _all_ the hung
tasks on the system before calling panic().
Quoting from https://syzkaller.appspot.com/text?tag=CrashReport&id=5316056503549952
----------------------------------------
INFO: task syz-executor0:6540 blocked for more than 120 seconds.
Not tainted 4.16.0+ #13
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
syz-executor0 D23560 6540 4521 0x80000004
Call Trace:
context_switch kernel/sched/core.c:2848 [inline]
__schedule+0x8fb/0x1ef0 kernel/sched/core.c:3490
schedule+0xf5/0x430 kernel/sched/core.c:3549
schedule_preempt_disabled+0x10/0x20 kernel/sched/core.c:3607
__mutex_lock_common kernel/locking/mutex.c:833 [inline]
__mutex_lock+0xb7f/0x1810 kernel/locking/mutex.c:893
mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:908
lo_ioctl+0x8b/0x1b70 drivers/block/loop.c:1355
__blkdev_driver_ioctl block/ioctl.c:303 [inline]
blkdev_ioctl+0x1759/0x1e00 block/ioctl.c:601
ioctl_by_bdev+0xa5/0x110 fs/block_dev.c:2060
isofs_get_last_session fs/isofs/inode.c:567 [inline]
isofs_fill_super+0x2ba9/0x3bc0 fs/isofs/inode.c:660
mount_bdev+0x2b7/0x370 fs/super.c:1119
isofs_mount+0x34/0x40 fs/isofs/inode.c:1560
mount_fs+0x66/0x2d0 fs/super.c:1222
vfs_kern_mount.part.26+0xc6/0x4a0 fs/namespace.c:1037
vfs_kern_mount fs/namespace.c:2514 [inline]
do_new_mount fs/namespace.c:2517 [inline]
do_mount+0xea4/0x2b90 fs/namespace.c:2847
ksys_mount+0xab/0x120 fs/namespace.c:3063
SYSC_mount fs/namespace.c:3077 [inline]
SyS_mount+0x39/0x50 fs/namespace.c:3074
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
(...snipped...)
Showing all locks held in the system:
(...snipped...)
2 locks held by syz-executor0/6540:
#0: 00000000566d4c39 (&type->s_umount_key#49/1){+.+.}, at: alloc_super fs/super.c:211 [inline]
#0: 00000000566d4c39 (&type->s_umount_key#49/1){+.+.}, at: sget_userns+0x3b2/0xe60 fs/super.c:502 /* down_write_nested(&s->s_umount, SINGLE_DEPTH_NESTING); */
#1: 0000000043ca8836 (&lo->lo_ctl_mutex/1){+.+.}, at: lo_ioctl+0x8b/0x1b70 drivers/block/loop.c:1355 /* mutex_lock_nested(&lo->lo_ctl_mutex, 1); */
(...snipped...)
3 locks held by syz-executor7/6541:
#0: 0000000043ca8836 (&lo->lo_ctl_mutex/1){+.+.}, at: lo_ioctl+0x8b/0x1b70 drivers/block/loop.c:1355 /* mutex_lock_nested(&lo->lo_ctl_mutex, 1); */
#1: 000000007bf3d3f9 (&bdev->bd_mutex){+.+.}, at: blkdev_reread_part+0x1e/0x40 block/ioctl.c:192
#2: 00000000566d4c39 (&type->s_umount_key#50){.+.+}, at: __get_super.part.10+0x1d3/0x280 fs/super.c:663 /* down_read(&sb->s_umount); */
----------------------------------------
When reporting an AB-BA deadlock like shown above, it would be nice if
trace of PID=6541 is printed as well as trace of PID=6540 before calling
panic().
Showing hung tasks up to /proc/sys/kernel/hung_task_warnings could delay
calling panic() but normally there should not be so many hung tasks.
Link: http://lkml.kernel.org/r/201804050705.BHE57833.HVFOFtSOMQJFOL@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Mandeep Singh Baines <msb@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We're already using a union of many fields here, so stop abusing the
_mapcount and make page_type its own field. That implies renaming some of
the machinery that creates PageBuddy, PageBalloon and PageKmemcg; bring
back the PG_buddy, PG_balloon and PG_kmemcg names.
As suggested by Kirill, make page_type a bitmask. Because it starts out
life as -1 (thanks to sharing the storage with _mapcount), setting a page
flag means clearing the appropriate bit. This gives us space for probably
twenty or so extra bits (depending how paranoid we want to be about
_mapcount underflow).
Link: http://lkml.kernel.org/r/20180518194519.3820-3-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mmap_sem is on the hot path of kernel, and it very contended, but it is
abused too. It is used to protect arg_start|end and evn_start|end when
reading /proc/$PID/cmdline and /proc/$PID/environ, but it doesn't make
sense since those proc files just expect to read 4 values atomically and
not related to VM, they could be set to arbitrary values by C/R.
And, the mmap_sem contention may cause unexpected issue like below:
INFO: task ps:14018 blocked for more than 120 seconds.
Tainted: G E 4.9.79-009.ali3000.alios7.x86_64 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
ps D 0 14018 1 0x00000004
Call Trace:
schedule+0x36/0x80
rwsem_down_read_failed+0xf0/0x150
call_rwsem_down_read_failed+0x18/0x30
down_read+0x20/0x40
proc_pid_cmdline_read+0xd9/0x4e0
__vfs_read+0x37/0x150
vfs_read+0x96/0x130
SyS_read+0x55/0xc0
entry_SYSCALL_64_fastpath+0x1a/0xc5
Both Alexey Dobriyan and Michal Hocko suggested to use dedicated lock
for them to mitigate the abuse of mmap_sem.
So, introduce a new spinlock in mm_struct to protect the concurrent
access to arg_start|end, env_start|end and others, as well as replace
write map_sem to read to protect the race condition between prctl and
sys_brk which might break check_data_rlimit(), and makes prctl more
friendly to other VM operations.
This patch just eliminates the abuse of mmap_sem, but it can't resolve
the above hung task warning completely since the later
access_remote_vm() call needs acquire mmap_sem. The mmap_sem
scalability issue will be solved in the future.
[yang.shi@linux.alibaba.com: add comment about mmap_sem and arg_lock]
Link: http://lkml.kernel.org/r/1524077799-80690-1-git-send-email-yang.shi@linux.alibaba.com
Link: http://lkml.kernel.org/r/1523730291-109696-1-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mateusz Guzik <mguzik@redhat.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Borkmann says:
====================
pull-request: bpf 2018-06-08
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix in the BPF verifier to reject modified ctx pointers on helper
functions, from Daniel.
2) Fix in BPF kselftests for get_cgroup_id_user() helper to only
record the cgroup id for a provided pid in order to reduce test
failures from processes interferring with the test, from Yonghong.
3) Fix a crash in AF_XDP's mem accounting when the process owning
the sock has CAP_IPC_LOCK capabilities set, from Daniel.
4) Fix an issue for AF_XDP on 32 bit machines where XDP_UMEM_PGOFF_*_RING
defines need ULL suffixes and use loff_t type as they are otherwise
truncated, from Geert.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
kasan reported use-after-free:
BUG: KASAN: use-after-free in call_usermodehelper_exec_work+0x2d3/0x310 kernel/umh.c:195
Write of size 4 at addr ffff8801d9202370 by task kworker/u4:2/50
Workqueue: events_unbound call_usermodehelper_exec_work
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1b9/0x294 lib/dump_stack.c:113
print_address_description+0x6c/0x20b mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
__asan_report_store4_noabort+0x17/0x20 mm/kasan/report.c:437
call_usermodehelper_exec_work+0x2d3/0x310 kernel/umh.c:195
process_one_work+0xc1e/0x1b50 kernel/workqueue.c:2145
worker_thread+0x1cc/0x1440 kernel/workqueue.c:2279
kthread+0x345/0x410 kernel/kthread.c:240
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412
The reason is that 'sub_info' cannot be accessed out of parent task
context, since it will be freed by the child.
Instead remember the pid in the child task.
Fixes: 449325b52b ("umh: introduce fork_usermode_blob() helper")
Reported-by: syzbot+2c73319c406f1987d156@syzkaller.appspotmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
As commit 28e33f9d78 ("bpf: disallow arithmetic operations on
context pointer") already describes, f1174f77b5 ("bpf/verifier:
rework value tracking") removed the specific white-listed cases
we had previously where we would allow for pointer arithmetic in
order to further generalize it, and allow e.g. context access via
modified registers. While the dereferencing of modified context
pointers had been forbidden through 28e33f9d78, syzkaller did
recently manage to trigger several KASAN splats for slab out of
bounds access and use after frees by simply passing a modified
context pointer to a helper function which would then do the bad
access since verifier allowed it in adjust_ptr_min_max_vals().
Rejecting arithmetic on ctx pointer in adjust_ptr_min_max_vals()
generally could break existing programs as there's a valid use
case in tracing in combination with passing the ctx to helpers as
bpf_probe_read(), where the register then becomes unknown at
verification time due to adding a non-constant offset to it. An
access sequence may look like the following:
offset = args->filename; /* field __data_loc filename */
bpf_probe_read(&dst, len, (char *)args + offset); // args is ctx
There are two options: i) we could special case the ctx and as
soon as we add a constant or bounded offset to it (hence ctx type
wouldn't change) we could turn the ctx into an unknown scalar, or
ii) we generalize the sanity test for ctx member access into a
small helper and assert it on the ctx register that was passed
as a function argument. Fwiw, latter is more obvious and less
complex at the same time, and one case that may potentially be
legitimate in future for ctx member access at least would be for
ctx to carry a const offset. Therefore, fix follows approach
from ii) and adds test cases to BPF kselftests.
Fixes: f1174f77b5 ("bpf/verifier: rework value tracking")
Reported-by: syzbot+3d0b2441dbb71751615e@syzkaller.appspotmail.com
Reported-by: syzbot+c8504affd4fdd0c1b626@syzkaller.appspotmail.com
Reported-by: syzbot+e5190cb881d8660fb1a3@syzkaller.appspotmail.com
Reported-by: syzbot+efae31b384d5badbd620@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Notable changes:
- Support for split PMD page table lock on 64-bit Book3S (Power8/9).
- Add support for HAVE_RELIABLE_STACKTRACE, so we properly support live
patching again.
- Add support for patching barrier_nospec in copy_from_user() and syscall entry.
- A couple of fixes for our data breakpoints on Book3S.
- A series from Nick optimising TLB/mm handling with the Radix MMU.
- Numerous small cleanups to squash sparse/gcc warnings from Mathieu Malaterre.
- Several series optimising various parts of the 32-bit code from Christophe Leroy.
- Removal of support for two old machines, "SBC834xE" and "C2K" ("GEFanuc,C2K"),
which is why the diffstat has so many deletions.
And many other small improvements & fixes.
There's a few out-of-area changes. Some minor ftrace changes OK'ed by Steve, and
a fix to our powernv cpuidle driver. Then there's a series touching mm, x86 and
fs/proc/task_mmu.c, which cleans up some details around pkey support. It was
ack'ed/reviewed by Ingo & Dave and has been in next for several weeks.
Thanks to:
Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Al Viro, Andrew
Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Balbir Singh,
Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King, Dave
Hansen, Fabio Estevam, Finn Thain, Frederic Barrat, Gautham R. Shenoy, Haren
Myneni, Hari Bathini, Ingo Molnar, Jonathan Neuschäfer, Josh Poimboeuf,
Kamalesh Babulal, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Greer, Mathieu
Malaterre, Matthew Wilcox, Michael Neuling, Michal Suchanek, Naveen N. Rao,
Nicholas Piggin, Nicolai Stange, Olof Johansson, Paul Gortmaker, Paul
Mackerras, Peter Rosin, Pridhiviraj Paidipeddi, Ram Pai, Rashmica Gupta, Ravi
Bangoria, Russell Currey, Sam Bobroff, Samuel Mendoza-Jonas, Segher
Boessenkool, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stewart Smith,
Thiago Jung Bauermann, Torsten Duwe, Vaibhav Jain, Wei Yongjun, Wolfram Sang,
Yisheng Xie, YueHaibing.
-----BEGIN PGP SIGNATURE-----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=ZlBf
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- Support for split PMD page table lock on 64-bit Book3S (Power8/9).
- Add support for HAVE_RELIABLE_STACKTRACE, so we properly support
live patching again.
- Add support for patching barrier_nospec in copy_from_user() and
syscall entry.
- A couple of fixes for our data breakpoints on Book3S.
- A series from Nick optimising TLB/mm handling with the Radix MMU.
- Numerous small cleanups to squash sparse/gcc warnings from Mathieu
Malaterre.
- Several series optimising various parts of the 32-bit code from
Christophe Leroy.
- Removal of support for two old machines, "SBC834xE" and "C2K"
("GEFanuc,C2K"), which is why the diffstat has so many deletions.
And many other small improvements & fixes.
There's a few out-of-area changes. Some minor ftrace changes OK'ed by
Steve, and a fix to our powernv cpuidle driver. Then there's a series
touching mm, x86 and fs/proc/task_mmu.c, which cleans up some details
around pkey support. It was ack'ed/reviewed by Ingo & Dave and has
been in next for several weeks.
Thanks to: Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Al
Viro, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd
Bergmann, Balbir Singh, Cédric Le Goater, Christophe Leroy, Christophe
Lombard, Colin Ian King, Dave Hansen, Fabio Estevam, Finn Thain,
Frederic Barrat, Gautham R. Shenoy, Haren Myneni, Hari Bathini, Ingo
Molnar, Jonathan Neuschäfer, Josh Poimboeuf, Kamalesh Babulal,
Madhavan Srinivasan, Mahesh Salgaonkar, Mark Greer, Mathieu Malaterre,
Matthew Wilcox, Michael Neuling, Michal Suchanek, Naveen N. Rao,
Nicholas Piggin, Nicolai Stange, Olof Johansson, Paul Gortmaker, Paul
Mackerras, Peter Rosin, Pridhiviraj Paidipeddi, Ram Pai, Rashmica
Gupta, Ravi Bangoria, Russell Currey, Sam Bobroff, Samuel
Mendoza-Jonas, Segher Boessenkool, Shilpasri G Bhat, Simon Guo,
Souptick Joarder, Stewart Smith, Thiago Jung Bauermann, Torsten Duwe,
Vaibhav Jain, Wei Yongjun, Wolfram Sang, Yisheng Xie, YueHaibing"
* tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (251 commits)
powerpc/64s/radix: Fix missing ptesync in flush_cache_vmap
cpuidle: powernv: Fix promotion from snooze if next state disabled
powerpc: fix build failure by disabling attribute-alias warning in pci_32
ocxl: Fix missing unlock on error in afu_ioctl_enable_p9_wait()
powerpc-opal: fix spelling mistake "Uniterrupted" -> "Uninterrupted"
powerpc: fix spelling mistake: "Usupported" -> "Unsupported"
powerpc/pkeys: Detach execute_only key on !PROT_EXEC
powerpc/powernv: copy/paste - Mask SO bit in CR
powerpc: Remove core support for Marvell mv64x60 hostbridges
powerpc/boot: Remove core support for Marvell mv64x60 hostbridges
powerpc/boot: Remove support for Marvell mv64x60 i2c controller
powerpc/boot: Remove support for Marvell MPSC serial controller
powerpc/embedded6xx: Remove C2K board support
powerpc/lib: optimise PPC32 memcmp
powerpc/lib: optimise 32 bits __clear_user()
powerpc/time: inline arch_vtime_task_switch()
powerpc/Makefile: set -mcpu=860 flag for the 8xx
powerpc: Implement csum_ipv6_magic in assembly
powerpc/32: Optimise __csum_partial()
powerpc/lib: Adjust .balign inside string functions for PPC32
...
The most interesting part of this update is user namespace support, mostly
done by Eric Biederman. This enables safe unprivileged fuse mounts within
a user namespace.
There are also a couple of fixes for bugs found by syzbot and miscellaneous
fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCWxanJAAKCRDh3BK/laaZ
PJjDAP4r6f4kL/5DZxK7JSnSue8BHESGD1LCMVgL57e9WmZukgD/cOtaO85ie3lh
DWuhX5xGZVMMX4frIGLfBn8ogSS+egw=
=3luD
-----END PGP SIGNATURE-----
Merge tag 'fuse-update-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
"The most interesting part of this update is user namespace support,
mostly done by Eric Biederman. This enables safe unprivileged fuse
mounts within a user namespace.
There are also a couple of fixes for bugs found by syzbot and
miscellaneous fixes and cleanups"
* tag 'fuse-update-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: don't keep dead fuse_conn at fuse_fill_super().
fuse: fix control dir setup and teardown
fuse: fix congested state leak on aborted connections
fuse: Allow fully unprivileged mounts
fuse: Ensure posix acls are translated outside of init_user_ns
fuse: add writeback documentation
fuse: honor AT_STATX_FORCE_SYNC
fuse: honor AT_STATX_DONT_SYNC
fuse: Restrict allow_other to the superblock's namespace or a descendant
fuse: Support fuse filesystems outside of init_user_ns
fuse: Fail all requests with invalid uids or gids
fuse: Remove the buggy retranslation of pids in fuse_dev_do_read
fuse: return -ECONNABORTED on /dev/fuse read after abort
fuse: atomic_o_trunc should truncate pagecache
Pull networking updates from David Miller:
1) Add Maglev hashing scheduler to IPVS, from Inju Song.
2) Lots of new TC subsystem tests from Roman Mashak.
3) Add TCP zero copy receive and fix delayed acks and autotuning with
SO_RCVLOWAT, from Eric Dumazet.
4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
Brouer.
5) Add ttl inherit support to vxlan, from Hangbin Liu.
6) Properly separate ipv6 routes into their logically independant
components. fib6_info for the routing table, and fib6_nh for sets of
nexthops, which thus can be shared. From David Ahern.
7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
messages from XDP programs. From Nikita V. Shirokov.
8) Lots of long overdue cleanups to the r8169 driver, from Heiner
Kallweit.
9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.
10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.
11) Plumb extack down into fib_rules, from Roopa Prabhu.
12) Add Flower classifier offload support to igb, from Vinicius Costa
Gomes.
13) Add UDP GSO support, from Willem de Bruijn.
14) Add documentation for eBPF helpers, from Quentin Monnet.
15) Add TLS tx offload to mlx5, from Ilya Lesokhin.
16) Allow applications to be given the number of bytes available to read
on a socket via a control message returned from recvmsg(), from
Soheil Hassas Yeganeh.
17) Add x86_32 eBPF JIT compiler, from Wang YanQing.
18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
From Björn Töpel.
19) Remove indirect load support from all of the BPF JITs and handle
these operations in the verifier by translating them into native BPF
instead. From Daniel Borkmann.
20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.
21) Allow XDP programs to do lookups in the main kernel routing tables
for forwarding. From David Ahern.
22) Allow drivers to store hardware state into an ELF section of kernel
dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.
23) Various RACK and loss detection improvements in TCP, from Yuchung
Cheng.
24) Add TCP SACK compression, from Eric Dumazet.
25) Add User Mode Helper support and basic bpfilter infrastructure, from
Alexei Starovoitov.
26) Support ports and protocol values in RTM_GETROUTE, from Roopa
Prabhu.
27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
Brouer.
28) Add lots of forwarding selftests, from Petr Machata.
29) Add generic network device failover driver, from Sridhar Samudrala.
* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
strparser: Add __strp_unpause and use it in ktls.
rxrpc: Fix terminal retransmission connection ID to include the channel
net: hns3: Optimize PF CMDQ interrupt switching process
net: hns3: Fix for VF mailbox receiving unknown message
net: hns3: Fix for VF mailbox cannot receiving PF response
bnx2x: use the right constant
Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
enic: fix UDP rss bits
netdev-FAQ: clarify DaveM's position for stable backports
rtnetlink: validate attributes in do_setlink()
mlxsw: Add extack messages for port_{un, }split failures
netdevsim: Add extack error message for devlink reload
devlink: Add extack to reload and port_{un, }split operations
net: metrics: add proper netlink validation
ipmr: fix error path when ipmr_new_table fails
ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
net: hns3: remove unused hclgevf_cfg_func_mta_filter
netfilter: provide udp*_lib_lookup for nf_tproxy
qed*: Utilize FW 8.37.2.0
...
- Use overflow helpers in 2-factor allocators (Kees, Rasmus)
- Introduce overflow test module (Rasmus, Kees)
- Introduce saturating size helper functions (Matthew, Kees)
- Treewide use of struct_size() for allocators (Kees)
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <kees@outflux.net>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=/3L8
-----END PGP SIGNATURE-----
Merge tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull overflow updates from Kees Cook:
"This adds the new overflow checking helpers and adds them to the
2-factor argument allocators. And this adds the saturating size
helpers and does a treewide replacement for the struct_size() usage.
Additionally this adds the overflow testing modules to make sure
everything works.
I'm still working on the treewide replacements for allocators with
"simple" multiplied arguments:
*alloc(a * b, ...) -> *alloc_array(a, b, ...)
and
*zalloc(a * b, ...) -> *calloc(a, b, ...)
as well as the more complex cases, but that's separable from this
portion of the series. I expect to have the rest sent before -rc1
closes; there are a lot of messy cases to clean up.
Summary:
- Introduce arithmetic overflow test helper functions (Rasmus)
- Use overflow helpers in 2-factor allocators (Kees, Rasmus)
- Introduce overflow test module (Rasmus, Kees)
- Introduce saturating size helper functions (Matthew, Kees)
- Treewide use of struct_size() for allocators (Kees)"
* tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
treewide: Use struct_size() for devm_kmalloc() and friends
treewide: Use struct_size() for vmalloc()-family
treewide: Use struct_size() for kmalloc()-family
device: Use overflow helpers for devm_kmalloc()
mm: Use overflow helpers in kvmalloc()
mm: Use overflow helpers in kmalloc_array*()
test_overflow: Add memory allocation overflow tests
overflow.h: Add allocation size calculation helpers
test_overflow: Report test failures
test_overflow: macrofy some more, do more tests for free
lib: add runtime test of check_*_overflow functions
compiler.h: enable builtin overflow checkers and add fallback code
triggers. For example:
# cd /sys/kernel/debug/tracing
# echo 'snapshot' > events/ftrace/print/trigger
# echo 'cause snapshot' > trace_marker
The rest of the changes are various clean ups and also one stable fix that
was added late in the cycle.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWxftjBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qosyAQCgmhb+/HgRYIbsKa8Q70E2pMx5A/za
4rQ37Q9PhDUJlAD/aWXfrqcMm+buAU0yY4K+eb+f2feKXWXxdZ/fuh7+nA4=
=lpXM
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"One new feature was added to ftrace, which is the trace_marker now
supports triggers. For example:
# cd /sys/kernel/debug/tracing
# echo 'snapshot' > events/ftrace/print/trigger
# echo 'cause snapshot' > trace_marker
The rest of the changes are various clean ups and also one stable fix
that was added late in the cycle"
* tag 'trace-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (21 commits)
tracing: Use match_string() instead of open coding it in trace_set_options()
branch-check: fix long->int truncation when profiling branches
ring-buffer: Fix typo in comment
ring-buffer: Fix a bunch of typos in comments
tracing/selftest: Add test to test simple snapshot trigger for trace_marker
tracing/selftest: Add test to test hist trigger between kernel event and trace_marker
tracing/selftest: Add selftests to test trace_marker histogram triggers
ftrace/selftest: Fix reset_trigger() to handle triggers with filters
ftrace/selftest: Have the reset_trigger code be a bit more careful
tracing: Document trace_marker triggers
tracing: Allow histogram triggers to access ftrace internal events
tracing: Prevent further users of zero size static arrays in trace events
tracing: Have zero size length in filter logic be full string
tracing: Add trigger file for trace_markers tracefs/ftrace/print
tracing: Do not show filter file for ftrace internal events
tracing: Add brackets in ftrace event dynamic arrays
tracing: Have event_trace_init() called by trace_init_tracefs()
tracing: Add __find_event_file() to find event files without restrictions
tracing: Do not reference event data in post call triggers
tracepoints: Fix the descriptions of tracepoint_probe_register{_prio}
...
-----BEGIN PGP SIGNATURE-----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=10u6
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20180605' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Another reasonable chunk of audit changes for v4.18, thirteen patches
in total.
The thirteen patches can mostly be broken down into one of four
categories: general bug fixes, accessor functions for audit state
stored in the task_struct, negative filter matches on executable
names, and extending the (relatively) new seccomp logging knobs to the
audit subsystem.
The main driver for the accessor functions from Richard are the
changes we're working on to associate audit events with containers,
but I think they have some standalone value too so I figured it would
be good to get them in now.
The seccomp/audit patches from Tyler apply the seccomp logging
improvements from a few releases ago to audit's seccomp logging;
starting with this patchset the changes in
/proc/sys/kernel/seccomp/actions_logged should apply to both the
standard kernel logging and audit.
As usual, everything passes the audit-testsuite and it happens to
merge cleanly with your tree"
[ Heh, except it had trivial merge conflicts with the SELinux tree that
also came in from Paul - Linus ]
* tag 'audit-pr-20180605' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: Fix wrong task in comparison of session ID
audit: use existing session info function
audit: normalize loginuid read access
audit: use new audit_context access funciton for seccomp_actions_logged
audit: use inline function to set audit context
audit: use inline function to get audit context
audit: convert sessionid unset to a macro
seccomp: Don't special case audited processes when logging
seccomp: Audit attempts to modify the actions_logged sysctl
seccomp: Configurable separator for the actions_logged string
seccomp: Separate read and write code for actions_logged sysctl
audit: allow not equal op for audit by executable
audit: add syscall information to FEATURE_CHANGE records
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=hB2y
-----END PGP SIGNATURE-----
Merge tag 'printk-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Help userspace log daemons to catch up with a flood of messages. They
will get woken after each message even if the console is far behind
and handled by another process.
- Flush printk safe buffers safely even when panic() happens in the
normal context.
- Fix possible va_list reuse when race happened in printk_safe().
- Remove %pCr printf format to prevent sleeping in the atomic context.
- Misc vsprintf code cleanup.
* tag 'printk-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
printk: drop in_nmi check from printk_safe_flush_on_panic()
lib/vsprintf: Remove atomic-unsafe support for %pCr
serial: sh-sci: Stop using printk format %pCr
thermal: bcm2835: Stop using printk format %pCr
clk: renesas: cpg-mssr: Stop using printk format %pCr
printk: fix possible reuse of va_list variable
printk: wake up klogd in vprintk_emit
vsprintf: Tweak pF/pf comment
lib/vsprintf: Mark expected switch fall-through
lib/vsprintf: Replace space with '_' before crng is ready
lib/vsprintf: Deduplicate pointer_string()
lib/vsprintf: Move pointer_string() upper
lib/vsprintf: Make flag_spec global
lib/vsprintf: Make strspec global
lib/vsprintf: Make dec_spec global
lib/test_printf: Mark big constant with UL
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL);
This patch makes the changes for kmalloc()-family (and kvmalloc()-family)
uses. It was done via automatic conversion with manual review for the
"CHECKME" non-standard cases noted below, using the following Coccinelle
script:
// pkey_cache = kmalloc(sizeof *pkey_cache + tprops->pkey_tbl_len *
// sizeof *pkey_cache->table, GFP_KERNEL);
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@
- alloc(sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP)
+ alloc(struct_size(VAR, ELEMENT, COUNT), GFP)
// mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL);
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@
- alloc(sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP)
+ alloc(struct_size(VAR, ELEMENT, COUNT), GFP)
// Same pattern, but can't trivially locate the trailing element name,
// or variable name.
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
expression SOMETHING, COUNT, ELEMENT;
@@
- alloc(sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP)
+ alloc(CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP)
Signed-off-by: Kees Cook <keescook@chromium.org>
The case that interrupt affinity setting fails with -EBUSY can be handled
in the kernel completely by using the already available generic pending
infrastructure.
If a irq_chip::set_affinity() fails with -EBUSY, handle it like the
interrupts for which irq_chip::set_affinity() can only be invoked from
interrupt context. Copy the new affinity mask to irq_desc::pending_mask and
set the affinity pending bit. The next raised interrupt for the affected
irq will check the pending bit and try to set the new affinity from the
handler. This avoids that -EBUSY is returned when an affinity change is
requested from user space and the previous change has not been cleaned
up. The new affinity will take effect when the next interrupt is raised
from the device.
Fixes: dccfe3147b ("x86/vector: Simplify vector move cleanup")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Song Liu <songliubraving@fb.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <liu.song.a23@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: stable@vger.kernel.org
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tariq Toukan <tariqt@mellanox.com>
Link: https://lkml.kernel.org/r/20180604162224.819273597@linutronix.de
The upcoming fix for the -EBUSY return from affinity settings requires to
use the irq_move_irq() functionality even on irq remapped interrupts. To
avoid the out of line call, move the check for the pending bit into an
inline helper.
Preparatory change for the real fix. No functional change.
Fixes: dccfe3147b ("x86/vector: Simplify vector move cleanup")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <liu.song.a23@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: stable@vger.kernel.org
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Dou Liyang <douly.fnst@cn.fujitsu.com>
Link: https://lkml.kernel.org/r/20180604162224.471925894@linutronix.de
The generic pending interrupt mechanism moves interrupts from the interrupt
handler on the original target CPU to the new destination CPU. This is
required for x86 and ia64 due to the way the interrupt delivery and
acknowledge works if the interrupts are not remapped.
However that update can fail for various reasons. Some of them are valid
reasons to discard the pending update, but the case, when the previous move
has not been fully cleaned up is not a legit reason to fail.
Check the return value of irq_do_set_affinity() for -EBUSY, which indicates
a pending cleanup, and rearm the pending move in the irq dexcriptor so it's
tried again when the next interrupt arrives.
Fixes: 996c591227 ("x86/irq: Plug vector cleanup race")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Song Liu <songliubraving@fb.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <liu.song.a23@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: stable@vger.kernel.org
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tariq Toukan <tariqt@mellanox.com>
Link: https://lkml.kernel.org/r/20180604162224.386544292@linutronix.de
Expose a new system call allowing each thread to register one userspace
memory area to be used as an ABI between kernel and user-space for two
purposes: user-space restartable sequences and quick access to read the
current CPU number value from user-space.
* Restartable sequences (per-cpu atomics)
Restartables sequences allow user-space to perform update operations on
per-cpu data without requiring heavy-weight atomic operations.
The restartable critical sections (percpu atomics) work has been started
by Paul Turner and Andrew Hunter. It lets the kernel handle restart of
critical sections. [1] [2] The re-implementation proposed here brings a
few simplifications to the ABI which facilitates porting to other
architectures and speeds up the user-space fast path.
Here are benchmarks of various rseq use-cases.
Test hardware:
arm32: ARMv7 Processor rev 4 (v7l) "Cubietruck", 2-core
x86-64: Intel E5-2630 v3@2.40GHz, 16-core, hyperthreading
The following benchmarks were all performed on a single thread.
* Per-CPU statistic counter increment
getcpu+atomic (ns/op) rseq (ns/op) speedup
arm32: 344.0 31.4 11.0
x86-64: 15.3 2.0 7.7
* LTTng-UST: write event 32-bit header, 32-bit payload into tracer
per-cpu buffer
getcpu+atomic (ns/op) rseq (ns/op) speedup
arm32: 2502.0 2250.0 1.1
x86-64: 117.4 98.0 1.2
* liburcu percpu: lock-unlock pair, dereference, read/compare word
getcpu+atomic (ns/op) rseq (ns/op) speedup
arm32: 751.0 128.5 5.8
x86-64: 53.4 28.6 1.9
* jemalloc memory allocator adapted to use rseq
Using rseq with per-cpu memory pools in jemalloc at Facebook (based on
rseq 2016 implementation):
The production workload response-time has 1-2% gain avg. latency, and
the P99 overall latency drops by 2-3%.
* Reading the current CPU number
Speeding up reading the current CPU number on which the caller thread is
running is done by keeping the current CPU number up do date within the
cpu_id field of the memory area registered by the thread. This is done
by making scheduler preemption set the TIF_NOTIFY_RESUME flag on the
current thread. Upon return to user-space, a notify-resume handler
updates the current CPU value within the registered user-space memory
area. User-space can then read the current CPU number directly from
memory.
Keeping the current cpu id in a memory area shared between kernel and
user-space is an improvement over current mechanisms available to read
the current CPU number, which has the following benefits over
alternative approaches:
- 35x speedup on ARM vs system call through glibc
- 20x speedup on x86 compared to calling glibc, which calls vdso
executing a "lsl" instruction,
- 14x speedup on x86 compared to inlined "lsl" instruction,
- Unlike vdso approaches, this cpu_id value can be read from an inline
assembly, which makes it a useful building block for restartable
sequences.
- The approach of reading the cpu id through memory mapping shared
between kernel and user-space is portable (e.g. ARM), which is not the
case for the lsl-based x86 vdso.
On x86, yet another possible approach would be to use the gs segment
selector to point to user-space per-cpu data. This approach performs
similarly to the cpu id cache, but it has two disadvantages: it is
not portable, and it is incompatible with existing applications already
using the gs segment selector for other purposes.
Benchmarking various approaches for reading the current CPU number:
ARMv7 Processor rev 4 (v7l)
Machine model: Cubietruck
- Baseline (empty loop): 8.4 ns
- Read CPU from rseq cpu_id: 16.7 ns
- Read CPU from rseq cpu_id (lazy register): 19.8 ns
- glibc 2.19-0ubuntu6.6 getcpu: 301.8 ns
- getcpu system call: 234.9 ns
x86-64 Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz:
- Baseline (empty loop): 0.8 ns
- Read CPU from rseq cpu_id: 0.8 ns
- Read CPU from rseq cpu_id (lazy register): 0.8 ns
- Read using gs segment selector: 0.8 ns
- "lsl" inline assembly: 13.0 ns
- glibc 2.19-0ubuntu6 getcpu: 16.6 ns
- getcpu system call: 53.9 ns
- Speed (benchmark taken on v8 of patchset)
Running 10 runs of hackbench -l 100000 seems to indicate, contrary to
expectations, that enabling CONFIG_RSEQ slightly accelerates the
scheduler:
Configuration: 2 sockets * 8-core Intel(R) Xeon(R) CPU E5-2630 v3 @
2.40GHz (directly on hardware, hyperthreading disabled in BIOS, energy
saving disabled in BIOS, turboboost disabled in BIOS, cpuidle.off=1
kernel parameter), with a Linux v4.6 defconfig+localyesconfig,
restartable sequences series applied.
* CONFIG_RSEQ=n
avg.: 41.37 s
std.dev.: 0.36 s
* CONFIG_RSEQ=y
avg.: 40.46 s
std.dev.: 0.33 s
- Size
On x86-64, between CONFIG_RSEQ=n/y, the text size increase of vmlinux is
567 bytes, and the data size increase of vmlinux is 5696 bytes.
[1] https://lwn.net/Articles/650333/
[2] http://www.linuxplumbersconf.org/2013/ocw/system/presentations/1695/original/LPC%20-%20PerCpu%20Atomics.pdf
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Watson <davejwatson@fb.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Chris Lameter <cl@linux.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andrew Hunter <ahh@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Maurer <bmaurer@fb.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-api@vger.kernel.org
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20151027235635.16059.11630.stgit@pjt-glaptop.roam.corp.google.com
Link: http://lkml.kernel.org/r/20150624222609.6116.86035.stgit@kitami.mtv.corp.google.com
Link: https://lkml.kernel.org/r/20180602124408.8430-3-mathieu.desnoyers@efficios.com
Pull workqueue updates from Tejun Heo:
- make kworkers report the workqueue it is executing or has executed
most recently in /proc/PID/comm (so they show up in ps/top)
- CONFIG_SMP shuffle to move stuff which isn't necessary for UP builds
inside CONFIG_SMP.
* 'for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: move function definitions within CONFIG_SMP block
workqueue: Make sure struct worker is accessible for wq_worker_comm()
workqueue: Show the latest workqueue name in /proc/PID/{comm,stat,status}
proc: Consolidate task->comm formatting into proc_task_name()
workqueue: Set worker->desc to workqueue name by default
workqueue: Make worker_attach/detach_pool() update worker->pool
workqueue: Replace pool->attach_mutex with global wq_pool_attach_mutex
Pull cgroup updates from Tejun Heo:
- For cpustat, cgroup has a percpu hierarchical stat mechanism which
propagates up the hierarchy lazily.
This contains commits to factor out and generalize the mechanism so
that it can be used for other cgroup stats too.
The original intention was to update memcg stats to use it but memcg
went for a different approach, so still the only user is cpustat. The
factoring out and generalization still make sense and it's likely
that this can be used for other purposes in the future.
- cgroup uses kernfs_notify() (which uses fsnotify()) to inform user
space of certain events. A rate limiting mechanism is added.
- Other misc changes.
* 'for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: css_set_lock should nest inside tasklist_lock
rdmacg: Convert to use match_string() helper
cgroup: Make cgroup_rstat_updated() ready for root cgroup usage
cgroup: Add memory barriers to plug cgroup_rstat_updated() race window
cgroup: Add cgroup_subsys->css_rstat_flush()
cgroup: Replace cgroup_rstat_mutex with a spinlock
cgroup: Factor out and expose cgroup_rstat_*() interface functions
cgroup: Reorganize kernel/cgroup/rstat.c
cgroup: Distinguish base resource stat implementation from rstat
cgroup: Rename stat to rstat
cgroup: Rename kernel/cgroup/stat.c to kernel/cgroup/rstat.c
cgroup: Limit event generation frequency
cgroup: Explicitly remove core interface files
The interrupts are enabled/disabled so the interrupt handler can run
with enabled interrupts while serving the interrupt and not lose other
interrupts especially the timer tick.
If the system runs with force-threaded interrupts then there is no need
to enable the interrupts.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
match_string() returns the index of an array for a matching string,
which can be used to simplify the code.
Link: http://lkml.kernel.org/r/1526546163-4609-1-git-send-email-xieyisheng1@huawei.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-06-05
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add a new BPF hook for sendmsg similar to existing hooks for bind and
connect: "This allows to override source IP (including the case when it's
set via cmsg(3)) and destination IP:port for unconnected UDP (slow path).
TCP and connected UDP (fast path) are not affected. This makes UDP support
complete, that is, connected UDP is handled by connect hooks, unconnected
by sendmsg ones.", from Andrey.
2) Rework of the AF_XDP API to allow extending it in future for type writer
model if necessary. In this mode a memory window is passed to hardware
and multiple frames might be filled into that window instead of just one
that is the case in the current fixed frame-size model. With the new
changes made this can be supported without having to add a new descriptor
format. Also, core bits for the zero-copy support for AF_XDP have been
merged as agreed upon, where i40e bits will be routed via Jeff later on.
Various improvements to documentation and sample programs included as
well, all from Björn and Magnus.
3) Given BPF's flexibility, a new program type has been added to implement
infrared decoders. Quote: "The kernel IR decoders support the most
widely used IR protocols, but there are many protocols which are not
supported. [...] There is a 'long tail' of unsupported IR protocols,
for which lircd is need to decode the IR. IR encoding is done in such
a way that some simple circuit can decode it; therefore, BPF is ideal.
[...] user-space can define a decoder in BPF, attach it to the rc
device through the lirc chardev.", from Sean.
4) Several improvements and fixes to BPF core, among others, dumping map
and prog IDs into fdinfo which is a straight forward way to correlate
BPF objects used by applications, removing an indirect call and therefore
retpoline in all map lookup/update/delete calls by invoking the callback
directly for 64 bit archs, adding a new bpf_skb_cgroup_id() BPF helper
for tc BPF programs to have an efficient way of looking up cgroup v2 id
for policy or other use cases. Fixes to make sure we zero tunnel/xfrm
state that hasn't been filled, to allow context access wrt pt_regs in
32 bit archs for tracing, and last but not least various test cases
for fixes that landed in bpf earlier, from Daniel.
5) Get rid of the ndo_xdp_flush API and extend the ndo_xdp_xmit with
a XDP_XMIT_FLUSH flag instead which allows to avoid one indirect
call as flushing is now merged directly into ndo_xdp_xmit(), from Jesper.
6) Add a new bpf_get_current_cgroup_id() helper that can be used in
tracing to retrieve the cgroup id from the current process in order
to allow for e.g. aggregation of container-level events, from Yonghong.
7) Two follow-up fixes for BTF to reject invalid input values and
related to that also two test cases for BPF kselftests, from Martin.
8) Various API improvements to the bpf_fib_lookup() helper, that is,
dropping MPLS bits which are not fully hashed out yet, rejecting
invalid helper flags, returning error for unsupported address
families as well as renaming flowlabel to flowinfo, from David.
9) Various fixes and improvements to sockmap BPF kselftests in particular
in proper error detection and data verification, from Prashant.
10) Two arm32 BPF JIT improvements. One is to fix imm range check with
regards to whether immediate fits into 24 bits, and a naming cleanup
to get functions related to rsh handling consistent to those handling
lsh, from Wang.
11) Two compile warning fixes in BPF, one for BTF and a false positive
to silent gcc in stack_map_get_build_id_offset(), from Arnd.
12) Add missing seg6.h header into tools include infrastructure in order
to fix compilation of BPF kselftests, from Mathieu.
13) Several formatting cleanups in the BPF UAPI helper description that
also fix an error during rst2man compilation, from Quentin.
14) Hide an unused variable in sk_msg_convert_ctx_access() when IPv6 is
not built into the kernel, from Yue.
15) Remove a useless double assignment in dev_map_enqueue(), from Colin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
These include a significant update of the generic power domains (genpd)
and Operating Performance Points (OPP) frameworks, mostly related to
the introduction of power domain performance levels, cpufreq updates
(new driver for Qualcomm Kryo processors, updates of the existing
drivers, some core fixes, schedutil governor improvements), PCI power
management fixes, ACPI workaround for EC-based wakeup events handling
on resume from suspend-to-idle, and major updates of the turbostat
and pm-graph utilities.
Specifics:
- Introduce power domain performance levels into the the generic
power domains (genpd) and Operating Performance Points (OPP)
frameworks (Viresh Kumar, Rajendra Nayak, Dan Carpenter).
- Fix two issues in the runtime PM framework related to the
initialization and removal of devices using device links (Ulf
Hansson).
- Clean up the initialization of drivers for devices in PM domains
(Ulf Hansson, Geert Uytterhoeven).
- Fix a cpufreq core issue related to the policy sysfs interface
causing CPU online to fail for CPUs sharing one cpufreq policy in
some situations (Tao Wang).
- Make it possible to use platform-specific suspend/resume hooks
in the cpufreq-dt driver and make the Armada 37xx DVFS use that
feature (Viresh Kumar, Miquel Raynal).
- Optimize policy transition notifications in cpufreq (Viresh Kumar).
- Improve the iowait boost mechanism in the schedutil cpufreq
governor (Patrick Bellasi).
- Improve the handling of deferred frequency updates in the
schedutil cpufreq governor (Joel Fernandes, Dietmar Eggemann,
Rafael Wysocki, Viresh Kumar).
- Add a new cpufreq driver for Qualcomm Kryo (Ilia Lin).
- Fix and clean up some cpufreq drivers (Colin Ian King, Dmitry
Osipenko, Doug Smythies, Luc Van Oostenryck, Simon Horman,
Viresh Kumar).
- Fix the handling of PCI devices with the DPM_SMART_SUSPEND flag
set and update stale comments in the PCI core PM code (Rafael
Wysocki).
- Work around an issue related to the handling of EC-based wakeup
events in the ACPI PM core during resume from suspend-to-idle if
the EC has been put into the low-power mode (Rafael Wysocki).
- Improve the handling of wakeup source objects in the PM core (Doug
Berger, Mahendran Ganesh, Rafael Wysocki).
- Update the driver core to prevent deferred probe from breaking
suspend/resume ordering (Feng Kan).
- Clean up the PM core somewhat (Bjorn Helgaas, Ulf Hansson, Rafael
Wysocki).
- Make the core suspend/resume code and cpufreq support the RT patch
(Sebastian Andrzej Siewior, Thomas Gleixner).
- Consolidate the PM QoS handling in cpuidle governors (Rafael
Wysocki).
- Fix a possible crash in the hibernation core (Tetsuo Handa).
- Update the rockchip-io Adaptive Voltage Scaling (AVS) driver
(David Wu).
- Update the turbostat utility (fixes, cleanups, new CPU IDs, new
command line options, built-in "Low Power Idle" counters support,
new POLL and POLL% columns) and add an entry for it to MAINTAINERS
(Len Brown, Artem Bityutskiy, Chen Yu, Laura Abbott, Matt Turner,
Prarit Bhargava, Srinivas Pandruvada).
- Update the pm-graph to version 5.1 (Todd Brandt).
- Update the intel_pstate_tracer utility (Doug Smythies).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=wqBV
-----END PGP SIGNATURE-----
Merge tag 'pm-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These include a significant update of the generic power domains
(genpd) and Operating Performance Points (OPP) frameworks, mostly
related to the introduction of power domain performance levels,
cpufreq updates (new driver for Qualcomm Kryo processors, updates of
the existing drivers, some core fixes, schedutil governor
improvements), PCI power management fixes, ACPI workaround for
EC-based wakeup events handling on resume from suspend-to-idle, and
major updates of the turbostat and pm-graph utilities.
Specifics:
- Introduce power domain performance levels into the the generic
power domains (genpd) and Operating Performance Points (OPP)
frameworks (Viresh Kumar, Rajendra Nayak, Dan Carpenter).
- Fix two issues in the runtime PM framework related to the
initialization and removal of devices using device links (Ulf
Hansson).
- Clean up the initialization of drivers for devices in PM domains
(Ulf Hansson, Geert Uytterhoeven).
- Fix a cpufreq core issue related to the policy sysfs interface
causing CPU online to fail for CPUs sharing one cpufreq policy in
some situations (Tao Wang).
- Make it possible to use platform-specific suspend/resume hooks in
the cpufreq-dt driver and make the Armada 37xx DVFS use that
feature (Viresh Kumar, Miquel Raynal).
- Optimize policy transition notifications in cpufreq (Viresh Kumar).
- Improve the iowait boost mechanism in the schedutil cpufreq
governor (Patrick Bellasi).
- Improve the handling of deferred frequency updates in the schedutil
cpufreq governor (Joel Fernandes, Dietmar Eggemann, Rafael Wysocki,
Viresh Kumar).
- Add a new cpufreq driver for Qualcomm Kryo (Ilia Lin).
- Fix and clean up some cpufreq drivers (Colin Ian King, Dmitry
Osipenko, Doug Smythies, Luc Van Oostenryck, Simon Horman, Viresh
Kumar).
- Fix the handling of PCI devices with the DPM_SMART_SUSPEND flag set
and update stale comments in the PCI core PM code (Rafael Wysocki).
- Work around an issue related to the handling of EC-based wakeup
events in the ACPI PM core during resume from suspend-to-idle if
the EC has been put into the low-power mode (Rafael Wysocki).
- Improve the handling of wakeup source objects in the PM core (Doug
Berger, Mahendran Ganesh, Rafael Wysocki).
- Update the driver core to prevent deferred probe from breaking
suspend/resume ordering (Feng Kan).
- Clean up the PM core somewhat (Bjorn Helgaas, Ulf Hansson, Rafael
Wysocki).
- Make the core suspend/resume code and cpufreq support the RT patch
(Sebastian Andrzej Siewior, Thomas Gleixner).
- Consolidate the PM QoS handling in cpuidle governors (Rafael
Wysocki).
- Fix a possible crash in the hibernation core (Tetsuo Handa).
- Update the rockchip-io Adaptive Voltage Scaling (AVS) driver (David
Wu).
- Update the turbostat utility (fixes, cleanups, new CPU IDs, new
command line options, built-in "Low Power Idle" counters support,
new POLL and POLL% columns) and add an entry for it to MAINTAINERS
(Len Brown, Artem Bityutskiy, Chen Yu, Laura Abbott, Matt Turner,
Prarit Bhargava, Srinivas Pandruvada).
- Update the pm-graph to version 5.1 (Todd Brandt).
- Update the intel_pstate_tracer utility (Doug Smythies)"
* tag 'pm-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (128 commits)
tools/power turbostat: update version number
tools/power turbostat: Add Node in output
tools/power turbostat: add node information into turbostat calculations
tools/power turbostat: remove num_ from cpu_topology struct
tools/power turbostat: rename num_cores_per_pkg to num_cores_per_node
tools/power turbostat: track thread ID in cpu_topology
tools/power turbostat: Calculate additional node information for a package
tools/power turbostat: Fix node and siblings lookup data
tools/power turbostat: set max_num_cpus equal to the cpumask length
tools/power turbostat: if --num_iterations, print for specific number of iterations
tools/power turbostat: Add Cannon Lake support
tools/power turbostat: delete duplicate #defines
x86: msr-index.h: Correct SNB_C1/C3_AUTO_UNDEMOTE defines
tools/power turbostat: Correct SNB_C1/C3_AUTO_UNDEMOTE defines
tools/power turbostat: add POLL and POLL% column
tools/power turbostat: Fix --hide Pk%pc10
tools/power turbostat: Build-in "Low Power Idle" counters support
tools/power turbostat: Don't make man pages executable
tools/power turbostat: remove blank lines
tools/power turbostat: a small C-states dump readability immprovement
...
Drop the in_nmi() check from printk_safe_flush_on_panic()
and attempt to re-init (IOW unlock) locked logbuf spinlock
from panic CPU regardless of its context.
Otherwise, theoretically, we can deadlock on logbuf trying to flush
per-CPU buffers:
a) Panic CPU is running in non-NMI context
b) Panic CPU sends out shutdown IPI via reboot vector
c) Panic CPU fails to stop all remote CPUs
d) Panic CPU sends out shutdown IPI via NMI vector
One of the CPUs that we bring down via NMI vector can hold
logbuf spin lock (theoretically).
Link: http://lkml.kernel.org/r/20180530070350.10131-1-sergey.senozhatsky@gmail.com
To: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Pull timers and timekeeping updates from Thomas Gleixner:
- Core infrastucture work for Y2038 to address the COMPAT interfaces:
+ Add a new Y2038 safe __kernel_timespec and use it in the core
code
+ Introduce config switches which allow to control the various
compat mechanisms
+ Use the new config switch in the posix timer code to control the
32bit compat syscall implementation.
- Prevent bogus selection of CPU local clocksources which causes an
endless reselection loop
- Remove the extra kthread in the clocksource code which has no value
and just adds another level of indirection
- The usual bunch of trivial updates, cleanups and fixlets all over the
place
- More SPDX conversions
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
clocksource/drivers/mxs_timer: Switch to SPDX identifier
clocksource/drivers/timer-imx-tpm: Switch to SPDX identifier
clocksource/drivers/timer-imx-gpt: Switch to SPDX identifier
clocksource/drivers/timer-imx-gpt: Remove outdated file path
clocksource/drivers/arc_timer: Add comments about locking while read GFRC
clocksource/drivers/mips-gic-timer: Add pr_fmt and reword pr_* messages
clocksource/drivers/sprd: Fix Kconfig dependency
clocksource: Move inline keyword to the beginning of function declarations
timer_list: Remove unused function pointer typedef
timers: Adjust a kernel-doc comment
tick: Prefer a lower rating device only if it's CPU local device
clocksource: Remove kthread
time: Change nanosleep to safe __kernel_* types
time: Change types to new y2038 safe __kernel_* types
time: Fix get_timespec64() for y2038 safe compat interfaces
time: Add new y2038 safe __kernel_timespec
posix-timers: Make compat syscalls depend on CONFIG_COMPAT_32BIT_TIME
time: Introduce CONFIG_COMPAT_32BIT_TIME
time: Introduce CONFIG_64BIT_TIME in architectures
compat: Enable compat_get/put_timespec64 always
...
Pull irq updates from Thomas Gleixner:
- Consolidation of softirq pending:
The softirq mask and its accessors/mutators have many implementations
scattered around many architectures. Most do the same things
consisting in a field in a per-cpu struct (often irq_cpustat_t)
accessed through per-cpu ops. We can provide instead a generic
efficient version that most of them can use. In fact s390 is the only
exception because the field is stored in lowcore.
- Support for level!?! triggered MSI (ARM)
Over the past couple of years, we've seen some SoCs coming up with
ways of signalling level interrupts using a new flavor of MSIs, where
the MSI controller uses two distinct messages: one that raises a
virtual line, and one that lowers it. The target MSI controller is in
charge of maintaining the state of the line.
This allows for a much simplified HW signal routing (no need to have
hundreds of discrete lines to signal level interrupts if you already
have a memory bus), but results in a departure from the current idea
the kernel has of MSIs.
- Support for Meson-AXG GPIO irqchip
- Large stm32 irqchip rework (suspend/resume, hierarchical domains)
- More SPDX conversions
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
ARM: dts: stm32: Add exti support to stm32mp157 pinctrl
ARM: dts: stm32: Add exti support for stm32mp157c
pinctrl/stm32: Add irq_eoi for stm32gpio irqchip
irqchip/stm32: Add suspend/resume support for hierarchy domain
irqchip/stm32: Add stm32mp1 support with hierarchy domain
irqchip/stm32: Prepare common functions
irqchip/stm32: Add host and driver data structures
irqchip/stm32: Add suspend support
irqchip/stm32: Add falling pending register support
irqchip/stm32: Checkpatch fix
irqchip/stm32: Optimizes and cleans up stm32-exti irq_domain
irqchip/meson-gpio: Add support for Meson-AXG SoCs
dt-bindings: interrupt-controller: New binding for Meson-AXG SoC
dt-bindings: interrupt-controller: Fix the double quotes
softirq/s390: Move default mutators of overwritten softirq mask to s390
softirq/x86: Switch to generic local_softirq_pending() implementation
softirq/sparc: Switch to generic local_softirq_pending() implementation
softirq/powerpc: Switch to generic local_softirq_pending() implementation
softirq/parisc: Switch to generic local_softirq_pending() implementation
softirq/ia64: Switch to generic local_softirq_pending() implementation
...
Pull scheduler updates from Ingo Molnar:
- power-aware scheduling improvements (Patrick Bellasi)
- NUMA balancing improvements (Mel Gorman)
- vCPU scheduling fixes (Rohit Jain)
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Update util_est before updating schedutil
sched/cpufreq: Modify aggregate utilization to always include blocked FAIR utilization
sched/deadline/Documentation: Add overrun signal and GRUB-PA documentation
sched/core: Distinguish between idle_cpu() calls based on desired effect, introduce available_idle_cpu()
sched/wait: Include <linux/wait.h> in <linux/swait.h>
sched/numa: Stagger NUMA balancing scan periods for new threads
sched/core: Don't schedule threads on pre-empted vCPUs
sched/fair: Avoid calling sync_entity_load_avg() unnecessarily
sched/fair: Rearrange select_task_rq_fair() to optimize it
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- x86 Intel uncore driver cleanups and enhancements (Kan Liang)
- group scheduling and other fixes (Song Liu
- store frame pointer in the sample traces for better profiling
(Alexey Budankov)
- compat fixes/enhancements (Eugene Syromiatnikov)
Tooling side changes, which you can build and install in a single step
via:
make -C tools/perf clean install
perf annotate:
- Support 'perf annotate --group' for non-explicit recorded event
"groups", showing multiple columns, one for each event, just like
when dealing with explicit event groups (those enclosed with {})
(Jin Yao)
- Record min/max LBR cycles (>= Skylake) and add 'perf annotate' TUI
hotkey to show it (c) (Jin Yao)
perf bpf:
- Add infrastructure to help in writing eBPF C programs to be used
with '-e name.c' type events in tools such as 'record' and 'trace',
with headers for common constructs and an examples directory that
will get populated as we add more such helpers and the 'perf bpf'
(Arnaldo Carvalho de Melo)
perf stat:
- Display time in precision based on std deviation (Jiri Olsa)
- Add --table option to display time of each run (Jiri Olsa)
- Display length strings of each run for --table option (Jiri Olsa)
perf buildid-cache:
- Add --list and --purge-all options (Ravi Bangoria)
perf test:
- Let 'perf test list' display subtests (Hendrik Brueckner)
perf pti:
- Create extra kernel maps to help in decoding samples in x86 PTI
entry trampolines (Adrian Hunter)
- Copy x86 PTI entry trampoline sections in the kcore copy used for
annotation and intel_pt CPU traces decoding (Adrian Hunter)
... and a lot of other fixes, enhancements and cleanups I did not
list, see the shortlog and git log for details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
perf/x86/intel/uncore: Clean up client IMC uncore
perf/x86/intel/uncore: Expose uncore_pmu_event*() functions
perf/x86/intel/uncore: Support IIO free-running counters on SKX
perf/x86/intel/uncore: Add infrastructure for free running counters
perf/x86/intel/uncore: Add new data structures for free running counters
perf/x86/intel/uncore: Correct fixed counter index check in generic code
perf/x86/intel/uncore: Correct fixed counter index check for NHM
perf/x86/intel/uncore: Introduce customized event_read() for client IMC uncore
perf/x86: Store user space frame-pointer value on a sample
perf/core: Wire up compat PERF_EVENT_IOC_QUERY_BPF, PERF_EVENT_IOC_MODIFY_ATTRIBUTES
perf/core: Fix bad use of igrab()
perf/core: Fix group scheduling with mixed hw and sw events
perf kcore_copy: Amend the offset of sections that remap kernel text
perf kcore_copy: Copy x86 PTI entry trampoline sections
perf kcore_copy: Get rid of kernel_map
perf kcore_copy: Iterate phdrs
perf kcore_copy: Layout sections
perf kcore_copy: Calculate offset from phnum
perf kcore_copy: Keep a count of phdrs
perf kcore_copy: Keep phdr data in a list
...
Pull locking updates from Ingo Molnar:
- Lots of tidying up changes all across the map for Linux's formal
memory/locking-model tooling, by Alan Stern, Akira Yokosawa, Andrea
Parri, Paul E. McKenney and SeongJae Park.
Notable changes beyond an overall update in the tooling itself is the
tidying up of spin_is_locked() semantics, which spills over into the
kernel proper as well.
- qspinlock improvements: the locking algorithm now guarantees forward
progress whereas the previous implementation in mainline could starve
threads indefinitely in cmpxchg() loops. Also other related cleanups
to the qspinlock code (Will Deacon)
- misc smaller improvements, cleanups and fixes all across the locking
subsystem
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
locking/rwsem: Simplify the is-owner-spinnable checks
tools/memory-model: Add reference for 'Simplifying ARM concurrency'
tools/memory-model: Update ASPLOS information
MAINTAINERS, tools/memory-model: Update e-mail address for Andrea Parri
tools/memory-model: Fix coding style in 'lock.cat'
tools/memory-model: Remove out-of-date comments and code from lock.cat
tools/memory-model: Improve mixed-access checking in lock.cat
tools/memory-model: Improve comments in lock.cat
tools/memory-model: Remove duplicated code from lock.cat
tools/memory-model: Flag "cumulativity" and "propagation" tests
tools/memory-model: Add model support for spin_is_locked()
tools/memory-model: Add scripts to test memory model
tools/memory-model: Fix coding style in 'linux-kernel.def'
tools/memory-model: Model 'smp_store_mb()'
tools/memory-order: Update the cheat-sheet to show that smp_mb__after_atomic() orders later RMW operations
tools/memory-order: Improve key for SELF and SV
tools/memory-model: Fix cheat sheet typo
tools/memory-model: Update required version of herdtools7
tools/memory-model: Redefine rb in terms of rcu-fence
tools/memory-model: Rename link and rcu-path to rcu-link and rb
...
Pull RCU updates from Ingo Molnar:
- updates to the handling of expedited grace periods
- updates to reduce lock contention in the rcu_node combining tree
[ These are in preparation for the consolidation of RCU-bh,
RCU-preempt, and RCU-sched into a single flavor, which was
requested by Linus in response to a security flaw whose root cause
included confusion between the multiple flavors of RCU ]
- torture-test updates that save their users some time and effort
- miscellaneous fixes
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
rcu/x86: Provide early rcu_cpu_starting() callback
torture: Make kvm-find-errors.sh find build warnings
rcutorture: Abbreviate kvm.sh summary lines
rcutorture: Print end-of-test state in kvm.sh summary
rcutorture: Print end-of-test state
torture: Fold parse-torture.sh into parse-console.sh
torture: Add a script to edit output from failed runs
rcu: Update list of rcu_future_grace_period() trace events
rcu: Drop early GP request check from rcu_gp_kthread()
rcu: Simplify and inline cpu_needs_another_gp()
rcu: The rcu_gp_cleanup() function does not need cpu_needs_another_gp()
rcu: Make rcu_start_this_gp() check for out-of-range requests
rcu: Add funnel locking to rcu_start_this_gp()
rcu: Make rcu_start_future_gp() caller select grace period
rcu: Inline rcu_start_gp_advanced() into rcu_start_future_gp()
rcu: Clear request other than RCU_GP_FLAG_INIT at GP end
rcu: Cleanup, don't put ->completed into an int
rcu: Switch __rcu_process_callbacks() to rcu_accelerate_cbs()
rcu: Avoid __call_rcu_core() root rcu_node ->lock acquisition
rcu: Make rcu_migrate_callbacks wake GP kthread when needed
...
Pull siginfo updates from Eric Biederman:
"This set of changes close the known issues with setting si_code to an
invalid value, and with not fully initializing struct siginfo. There
remains work to do on nds32, arc, unicore32, powerpc, arm, arm64, ia64
and x86 to get the code that generates siginfo into a simpler and more
maintainable state. Most of that work involves refactoring the signal
handling code and thus careful code review.
Also not included is the work to shrink the in kernel version of
struct siginfo. That depends on getting the number of places that
directly manipulate struct siginfo under control, as it requires the
introduction of struct kernel_siginfo for the in kernel things.
Overall this set of changes looks like it is making good progress, and
with a little luck I will be wrapping up the siginfo work next
development cycle"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits)
signal/sh: Stop gcc warning about an impossible case in do_divide_error
signal/mips: Report FPE_FLTUNK for undiagnosed floating point exceptions
signal/um: More carefully relay signals in relay_signal.
signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR}
signal: Remove unncessary #ifdef SEGV_PKUERR in 32bit compat code
signal/signalfd: Add support for SIGSYS
signal/signalfd: Remove __put_user from signalfd_copyinfo
signal/xtensa: Use force_sig_fault where appropriate
signal/xtensa: Consistenly use SIGBUS in do_unaligned_user
signal/um: Use force_sig_fault where appropriate
signal/sparc: Use force_sig_fault where appropriate
signal/sparc: Use send_sig_fault where appropriate
signal/sh: Use force_sig_fault where appropriate
signal/s390: Use force_sig_fault where appropriate
signal/riscv: Replace do_trap_siginfo with force_sig_fault
signal/riscv: Use force_sig_fault where appropriate
signal/parisc: Use force_sig_fault where appropriate
signal/parisc: Use force_sig_mceerr where appropriate
signal/openrisc: Use force_sig_fault where appropriate
signal/nios2: Use force_sig_fault where appropriate
...
An anonymous source sent me a bunch of typo fixes in the comments of
ring_buffer.c file. That source did not want to be associated to this patch
because they don't want to be known as "one of those" commiters (you know who
you are!). They gave me permission to sign this off in my own name.
Suggested-by: One-of-those-commiters@YouKnowWhoYouAre.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull aio updates from Al Viro:
"Majority of AIO stuff this cycle. aio-fsync and aio-poll, mostly.
The only thing I'm holding back for a day or so is Adam's aio ioprio -
his last-minute fixup is trivial (missing stub in !CONFIG_BLOCK case),
but let it sit in -next for decency sake..."
* 'work.aio-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
aio: sanitize the limit checking in io_submit(2)
aio: fold do_io_submit() into callers
aio: shift copyin of iocb into io_submit_one()
aio_read_events_ring(): make a bit more readable
aio: all callers of aio_{read,write,fsync,poll} treat 0 and -EIOCBQUEUED the same way
aio: take list removal to (some) callers of aio_complete()
aio: add missing break for the IOCB_CMD_FDSYNC case
random: convert to ->poll_mask
timerfd: convert to ->poll_mask
eventfd: switch to ->poll_mask
pipe: convert to ->poll_mask
crypto: af_alg: convert to ->poll_mask
net/rxrpc: convert to ->poll_mask
net/iucv: convert to ->poll_mask
net/phonet: convert to ->poll_mask
net/nfc: convert to ->poll_mask
net/caif: convert to ->poll_mask
net/bluetooth: convert to ->poll_mask
net/sctp: convert to ->poll_mask
net/tipc: convert to ->poll_mask
...
Commit bf6fa2c893 ("bpf: implement bpf_get_current_cgroup_id()
helper") introduced a new helper bpf_get_current_cgroup_id().
The helper has a dependency on CONFIG_CGROUPS.
When CONFIG_CGROUPS is not defined, using the helper will result
the following verifier error:
kernel subsystem misconfigured func bpf_get_current_cgroup_id#80
which is hard for users to interpret.
Guarding the reference to bpf_get_current_cgroup_id_proto with
CONFIG_CGROUPS will result in below better message:
unknown func bpf_get_current_cgroup_id#80
Fixes: bf6fa2c893 ("bpf: implement bpf_get_current_cgroup_id() helper")
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=nga/
-----END PGP SIGNATURE-----
Merge tag 'for-4.18/block-20180603' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- clean up how we pass around gfp_t and
blk_mq_req_flags_t (Christoph)
- prepare us to defer scheduler attach (Christoph)
- clean up drivers handling of bounce buffers (Christoph)
- fix timeout handling corner cases (Christoph/Bart/Keith)
- bcache fixes (Coly)
- prep work for bcachefs and some block layer optimizations (Kent).
- convert users of bio_sets to using embedded structs (Kent).
- fixes for the BFQ io scheduler (Paolo/Davide/Filippo)
- lightnvm fixes and improvements (Matias, with contributions from Hans
and Javier)
- adding discard throttling to blk-wbt (me)
- sbitmap blk-mq-tag handling (me/Omar/Ming).
- remove the sparc jsflash block driver, acked by DaveM.
- Kyber scheduler improvement from Jianchao, making it more friendly
wrt merging.
- conversion of symbolic proc permissions to octal, from Joe Perches.
Previously the block parts were a mix of both.
- nbd fixes (Josef and Kevin Vigor)
- unify how we handle the various kinds of timestamps that the block
core and utility code uses (Omar)
- three NVMe pull requests from Keith and Christoph, bringing AEN to
feature completeness, file backed namespaces, cq/sq lock split, and
various fixes
- various little fixes and improvements all over the map
* tag 'for-4.18/block-20180603' of git://git.kernel.dk/linux-block: (196 commits)
blk-mq: update nr_requests when switching to 'none' scheduler
block: don't use blocking queue entered for recursive bio submits
dm-crypt: fix warning in shutdown path
lightnvm: pblk: take bitmap alloc. out of critical section
lightnvm: pblk: kick writer on new flush points
lightnvm: pblk: only try to recover lines with written smeta
lightnvm: pblk: remove unnecessary bio_get/put
lightnvm: pblk: add possibility to set write buffer size manually
lightnvm: fix partial read error path
lightnvm: proper error handling for pblk_bio_add_pages
lightnvm: pblk: fix smeta write error path
lightnvm: pblk: garbage collect lines with failed writes
lightnvm: pblk: rework write error recovery path
lightnvm: pblk: remove dead function
lightnvm: pass flag on graceful teardown to targets
lightnvm: pblk: check for chunk size before allocating it
lightnvm: pblk: remove unnecessary argument
lightnvm: pblk: remove unnecessary indirection
lightnvm: pblk: return NVM_ error on failed submission
lightnvm: pblk: warn in case of corrupted write buffer
...
* pm-pci:
PCI / PM: Clean up outdated comments in pci_target_state()
PCI / PM: Do not clear state_saved for devices that remain suspended
* acpi-pm:
ACPI: EC: Dispatch the EC GPE directly on s2idle wake
ACPICA: Introduce acpi_dispatch_gpe()
* pm-sleep:
PM / hibernate: Fix oops at snapshot_write()
PM / wakeup: Make s2idle_lock a RAW_SPINLOCK
PM / s2idle: Make s2idle_wait_head swait based
PM / wakeup: Make events_lock a RAW_SPINLOCK
PM / suspend: Prevent might sleep splats
* pm-avs:
PM / AVS: rockchip-io: add io selectors and supplies for PX30
* pm-qos:
PM / QoS: Drop redundant declaration of pm_qos_get_value()
* pm-core:
PM / runtime: Drop usage count for suppliers at device link removal
PM / runtime: Fixup reference counting of device link suppliers at probe
PM: wakeup: Use pr_debug() for the "aborting suspend" message
PM / core: Drop unused internal inline functions for sysfs
PM / core: Drop unused internal functions for pm_qos sysfs
PM / core: Drop unused internal inline functions for wakeirqs
PM / core: Drop internal unused inline functions for wakeups
PM / wakeup: Only update last time for active wakeup sources
PM / wakeup: Use seq_open() to show wakeup stats
PM / core: Use dev_printk() and symbols in suspend/resume diagnostics
PM / core: Simplify initcall_debug_report() timing
PM / core: Remove unused initcall_debug_report() arguments
PM / core: fix deferred probe breaking suspend resume order
bpf has been used extensively for tracing. For example, bcc
contains an almost full set of bpf-based tools to trace kernel
and user functions/events. Most tracing tools are currently
either filtered based on pid or system-wide.
Containers have been used quite extensively in industry and
cgroup is often used together to provide resource isolation
and protection. Several processes may run inside the same
container. It is often desirable to get container-level tracing
results as well, e.g. syscall count, function count, I/O
activity, etc.
This patch implements a new helper, bpf_get_current_cgroup_id(),
which will return cgroup id based on the cgroup within which
the current task is running.
The later patch will provide an example to show that
userspace can get the same cgroup id so it could
configure a filter or policy in the bpf program based on
task cgroup id.
The helper is currently implemented for tracing. It can
be added to other program types as well when needed.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull scheduler fixes from Thomas Gleixner:
- two patches addressing the problem that the scheduler allows under
certain conditions user space tasks to be scheduled on CPUs which are
not yet fully booted which causes a few subtle and hard to debug
issue
- add a missing runqueue clock update in the deadline scheduler which
triggers a warning under certain circumstances
- fix a silly typo in the scheduler header file
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/headers: Fix typo
sched/deadline: Fix missing clock update
sched/core: Require cpu_active() in select_task_rq(), for user tasks
sched/core: Fix rules for running on online && !active CPUs
The XDP_REDIRECT map devmap can avoid using ndo_xdp_flush, by instead
instructing ndo_xdp_xmit to flush via XDP_XMIT_FLUSH flag in
appropriate places.
Notice after this patch it is possible to remove ndo_xdp_flush
completely, as this is the last user of ndo_xdp_flush. This is left
for later patches, to keep driver changes separate.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch only change the API and reject any use of flags. This is an
intermediate step that allows us to implement the flush flag operation
later, for each individual driver in a separate patch.
The plan is to implement flush operation via XDP_XMIT_FLUSH flag
and then remove XDP_XMIT_FLAGS_NONE when done.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Wang reported that all the testcases for BPF_PROG_TYPE_PERF_EVENT
program type in test_verifier report the following errors on x86_32:
172/p unpriv: spill/fill of different pointers ldx FAIL
Unexpected error message!
0: (bf) r6 = r10
1: (07) r6 += -8
2: (15) if r1 == 0x0 goto pc+3
R1=ctx(id=0,off=0,imm=0) R6=fp-8,call_-1 R10=fp0,call_-1
3: (bf) r2 = r10
4: (07) r2 += -76
5: (7b) *(u64 *)(r6 +0) = r2
6: (55) if r1 != 0x0 goto pc+1
R1=ctx(id=0,off=0,imm=0) R2=fp-76,call_-1 R6=fp-8,call_-1 R10=fp0,call_-1 fp-8=fp
7: (7b) *(u64 *)(r6 +0) = r1
8: (79) r1 = *(u64 *)(r6 +0)
9: (79) r1 = *(u64 *)(r1 +68)
invalid bpf_context access off=68 size=8
378/p check bpf_perf_event_data->sample_period byte load permitted FAIL
Failed to load prog 'Permission denied'!
0: (b7) r0 = 0
1: (71) r0 = *(u8 *)(r1 +68)
invalid bpf_context access off=68 size=1
379/p check bpf_perf_event_data->sample_period half load permitted FAIL
Failed to load prog 'Permission denied'!
0: (b7) r0 = 0
1: (69) r0 = *(u16 *)(r1 +68)
invalid bpf_context access off=68 size=2
380/p check bpf_perf_event_data->sample_period word load permitted FAIL
Failed to load prog 'Permission denied'!
0: (b7) r0 = 0
1: (61) r0 = *(u32 *)(r1 +68)
invalid bpf_context access off=68 size=4
381/p check bpf_perf_event_data->sample_period dword load permitted FAIL
Failed to load prog 'Permission denied'!
0: (b7) r0 = 0
1: (79) r0 = *(u64 *)(r1 +68)
invalid bpf_context access off=68 size=8
Reason is that struct pt_regs on x86_32 doesn't fully align to 8 byte
boundary due to its size of 68 bytes. Therefore, bpf_ctx_narrow_access_ok()
will then bail out saying that off & (size_default - 1) which is 68 & 7
doesn't cleanly align in the case of sample_period access from struct
bpf_perf_event_data, hence verifier wrongly thinks we might be doing an
unaligned access here though underlying arch can handle it just fine.
Therefore adjust this down to machine size and check and rewrite the
offset for narrow access on that basis. We also need to fix corresponding
pe_prog_is_valid_access(), since we hit the check for off % size != 0
(e.g. 68 % 8 -> 4) in the first and last test. With that in place, progs
for tracing work on x86_32.
Reported-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
While some of the BPF map lookup helpers provide a ->map_gen_lookup()
callback for inlining the map lookup altogether it is not available
for every map, so the remaining ones have to call bpf_map_lookup_elem()
helper which does a dispatch to map->ops->map_lookup_elem(). In
times of retpolines, this will control and trap speculative execution
rather than letting it do its work for the indirect call and will
therefore cause a slowdown. Likewise, bpf_map_update_elem() and
bpf_map_delete_elem() do not have an inlined version and need to call
into their map->ops->map_update_elem() resp. map->ops->map_delete_elem()
handlers.
Before:
# bpftool prog dump xlated id 1
0: (bf) r2 = r10
1: (07) r2 += -8
2: (7a) *(u64 *)(r2 +0) = 0
3: (18) r1 = map[id:1]
5: (85) call __htab_map_lookup_elem#232656
6: (15) if r0 == 0x0 goto pc+4
7: (71) r1 = *(u8 *)(r0 +35)
8: (55) if r1 != 0x0 goto pc+1
9: (72) *(u8 *)(r0 +35) = 1
10: (07) r0 += 56
11: (15) if r0 == 0x0 goto pc+4
12: (bf) r2 = r0
13: (18) r1 = map[id:1]
15: (85) call bpf_map_delete_elem#215008 <-- indirect call via
16: (95) exit helper
After:
# bpftool prog dump xlated id 1
0: (bf) r2 = r10
1: (07) r2 += -8
2: (7a) *(u64 *)(r2 +0) = 0
3: (18) r1 = map[id:1]
5: (85) call __htab_map_lookup_elem#233328
6: (15) if r0 == 0x0 goto pc+4
7: (71) r1 = *(u8 *)(r0 +35)
8: (55) if r1 != 0x0 goto pc+1
9: (72) *(u8 *)(r0 +35) = 1
10: (07) r0 += 56
11: (15) if r0 == 0x0 goto pc+4
12: (bf) r2 = r0
13: (18) r1 = map[id:1]
15: (85) call htab_lru_map_delete_elem#238240 <-- direct call
16: (95) exit
In all three lookup/update/delete cases however we can use the actual
address of the map callback directly if we find that there's only a
single path with a map pointer leading to the helper call, meaning
when the map pointer has not been poisoned from verifier side.
Example code can be seen above for the delete case.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Its trivial and straight forward to expose it for scripts that can
then use it along with bpftool in order to inspect an individual
application's used maps and progs. Right now we dump some basic
information in the fdinfo file but with the help of the map/prog
id full introspection becomes possible now.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stating 'proprietary program' in the error is just silly since it
can also be a different open source license than that which is just
not compatible.
Reference: https://twitter.com/majek04/status/998531268039102465
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Filling in the padding slot in the bpf structure as a bug fix in 'ne'
overlapped with actually using that padding area for something in
'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
There is currently a mismatch between the resources that will trigger
the e820_pmem driver to register/load and the resources that will
actually be surfaced as pmem ranges. register_e820_pmem() uses
walk_iomem_res_desc() which includes children and siblings. In contrast,
e820_pmem_probe() only considers top level resources. For example the
following resource tree results in the driver being loaded, but no
resources being registered:
398000000000-39bfffffffff : PCI Bus 0000:ae
39be00000000-39bf07ffffff : PCI Bus 0000:af
39be00000000-39beffffffff : 0000:af:00.0
39be10000000-39beffffffff : Persistent Memory (legacy)
Fix this up to allow definitions of "legacy" pmem ranges anywhere in
system-physical address space. Not that it is a recommended or safe to
define a pmem range in PCI space, but it is useful for debug /
experimentation, and the restriction on being a top-level resource was
arbitrary.
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The t->type in BTF_KIND_FWD is not used. It must be 0.
This patch ensures that and also adds a test case in test_btf.c
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch ensures array's t->size is 0.
The array size is decided by its individual elem's size and the
number of elements. Hence, t->size is not used and
it must be 0.
A test case is added to test_btf.c
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A missing clock update is causing the following warning:
rq->clock_update_flags < RQCF_ACT_SKIP
WARNING: CPU: 10 PID: 0 at kernel/sched/sched.h:963 inactive_task_timer+0x5d6/0x720
Call Trace:
<IRQ>
__hrtimer_run_queues+0x10f/0x530
hrtimer_interrupt+0xe5/0x240
smp_apic_timer_interrupt+0x79/0x2b0
apic_timer_interrupt+0xf/0x20
</IRQ>
do_idle+0x203/0x280
cpu_startup_entry+0x6f/0x80
start_secondary+0x1b0/0x200
secondary_startup_64+0xa5/0xb0
hardirqs last enabled at (793919): [<ffffffffa27c5f6e>] cpuidle_enter_state+0x9e/0x360
hardirqs last disabled at (793920): [<ffffffffa2a0096e>] interrupt_entry+0xce/0xe0
softirqs last enabled at (793922): [<ffffffffa20bef78>] irq_enter+0x68/0x70
softirqs last disabled at (793921): [<ffffffffa20bef5d>] irq_enter+0x4d/0x70
This happens because inactive_task_timer() calls sub_running_bw() (if
TASK_DEAD and non_contending) that might trigger a schedutil update,
which might access the clock. Clock is however currently updated only
later in inactive_task_timer() function.
Fix the problem by updating the clock right after task_rq_lock().
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Claudio Scordino <claudio@evidence.eu.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luca Abeni <luca.abeni@santannapisa.it>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180530160809.9074-1-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
select_task_rq() is used in a few paths to select the CPU upon which a
thread should be run - for example it is used by try_to_wake_up() & by
fork or exec balancing. As-is it allows use of any online CPU that is
present in the task's cpus_allowed mask.
This presents a problem because there is a period whilst CPUs are
brought online where a CPU is marked online, but is not yet fully
initialized - ie. the period where CPUHP_AP_ONLINE_IDLE <= state <
CPUHP_ONLINE. Usually we don't run any user tasks during this window,
but there are corner cases where this can happen. An example observed
is:
- Some user task A, running on CPU X, forks to create task B.
- sched_fork() calls __set_task_cpu() with cpu=X, setting task B's
task_struct::cpu field to X.
- CPU X is offlined.
- Task A, currently somewhere between the __set_task_cpu() in
copy_process() and the call to wake_up_new_task(), is migrated to
CPU Y by migrate_tasks() when CPU X is offlined.
- CPU X is onlined, but still in the CPUHP_AP_ONLINE_IDLE state. The
scheduler is now active on CPU X, but there are no user tasks on
the runqueue.
- Task A runs on CPU Y & reaches wake_up_new_task(). This calls
select_task_rq() with cpu=X, taken from task B's task_struct,
and select_task_rq() allows CPU X to be returned.
- Task A enqueues task B on CPU X's runqueue, via activate_task() &
enqueue_task().
- CPU X now has a user task on its runqueue before it has reached the
CPUHP_ONLINE state.
In most cases, the user tasks that schedule on the newly onlined CPU
have no idea that anything went wrong, but one case observed to be
problematic is if the task goes on to invoke the sched_setaffinity
syscall. The newly onlined CPU reaches the CPUHP_AP_ONLINE_IDLE state
before the CPU that brought it online calls stop_machine_unpark(). This
means that for a portion of the window of time between
CPUHP_AP_ONLINE_IDLE & CPUHP_ONLINE the newly onlined CPU's struct
cpu_stopper has its enabled field set to false. If a user thread is
executed on the CPU during this window and it invokes sched_setaffinity
with a CPU mask that does not include the CPU it's running on, then when
__set_cpus_allowed_ptr() calls stop_one_cpu() intending to invoke
migration_cpu_stop() and perform the actual migration away from the CPU
it will simply return -ENOENT rather than calling migration_cpu_stop().
We then return from the sched_setaffinity syscall back to the user task
that is now running on a CPU which it just asked not to run on, and
which is not present in its cpus_allowed mask.
This patch resolves the problem by having select_task_rq() enforce that
user tasks run on CPUs that are active - the same requirement that
select_fallback_rq() already enforces. This should ensure that newly
onlined CPUs reach the CPUHP_AP_ACTIVE state before being able to
schedule user tasks, and also implies that bringup_wait_for_ap() will
have called stop_machine_unpark() which resolves the sched_setaffinity
issue above.
I haven't yet investigated them, but it may be of interest to review
whether any of the actions performed by hotplug states between
CPUHP_AP_ONLINE_IDLE & CPUHP_AP_ACTIVE could have similar unintended
effects on user tasks that might schedule before they are reached, which
might widen the scope of the problem from just affecting the behaviour
of sched_setaffinity.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180526154648.11635-2-paul.burton@mips.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As already enforced by the WARN() in __set_cpus_allowed_ptr(), the rules
for running on an online && !active CPU are stricter than just being a
kthread, you need to be a per-cpu kthread.
If you're not strictly per-CPU, you have better CPUs to run on and
don't need the partially booted one to get your work done.
The exception is to allow smpboot threads to bootstrap the CPU itself
and get kernel 'services' initialized before we allow userspace on it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 955dbdf4ce ("sched: Allow migrating kthreads into online but inactive CPUs")
Link: http://lkml.kernel.org/r/20170725165821.cejhb7v2s3kecems@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The assignment dev = dev is redundant and should be removed.
Detected by CoverityScan, CID#1469486 ("Evaluation order violation")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support for BPF_PROG_LIRC_MODE2. This type of BPF program can call
rc_keydown() to reported decoded IR scancodes, or rc_repeat() to report
that the last key should be repeated.
The bpf program can be attached to using the bpf(BPF_PROG_ATTACH) syscall;
the target_fd must be the /dev/lircN device.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This makes is it possible for bpf prog detach to return -ENOENT.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull RCU fix from Paul E. McKenney:
"This additional v4.18 pull request contains a single commit that fell
through the cracks:
Provide early rcu_cpu_starting() callback for the benefit of the
x86/mtrr code, which needs RCU to be available on incoming CPUs
earlier than has been the case in the past."
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that trace_marker can have triggers, including a histogram triggers, the
onmatch() and onmax() access the trace event. To do so, the search routine
to find the event file needs to use the raw __find_event_file() that does
not filter out ftrace events.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As strings in trace events may not have a nul terminating character, the
filter string compares use the defined string length for the field for the
compares.
The trace_marker records data slightly different than do normal events. It's
size is zero, meaning that the string is the rest of the array, and that the
string also ends with '\0'.
If the size is zero, assume that the string is nul terminated and read the
string in question as is.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Allow writing to the trace_markers file initiate triggers defined in
tracefs/ftrace/print/trigger file. This will allow of user space to trigger
the same type of triggers (including histograms) that the trace events use.
Had to create a ftrace_event_register() function that will become the
trace_marker print event's reg() function. This is required because of how
triggers are enabled:
event_trigger_write() {
event_trigger_regex_write() {
trigger_process_regex() {
for p in trigger_commands {
p->func(); /* trigger_snapshot_cmd->func */
event_trigger_callback() {
cmd_ops->reg() /* register_trigger() */ {
trace_event_trigger_enable_disable() {
trace_event_enable_disable() {
call->class->reg();
Without the reg() function, the trigger code will call a NULL pointer and
crash the system.
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Karim Yaghmour <karim.yaghmour@opersys.com>
Cc: Brendan Gregg <bgregg@netflix.com>
Suggested-by: Joel Fernandes <joelaf@google.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
bugs that deal with triggers and instances.
The first is a generic trigger bug where the triggers are not removed
from a link list properly when deleting an instance.
The second is specific to snapshots, where the snapshot is does the
snapshot to the top level buffer, when it is suppose to snapshot the
buffer associated to the instance the snapshot trigger exists in.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWw0+4hQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qpwyAQC56/yYzfpJnpjwcI2E7j8FihLg0Nlr
bq85CcQGRm07dwD+L90disWyPxpxH/fGO4OCET1LeoaO1I/fBfECR2XXjQY=
=w4al
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.17-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"While writing selftests for a new feature, I triggered two existing
bugs that deal with triggers and instances.
- a generic trigger bug where the triggers are not removed from a
linked list properly when deleting an instance.
- a bug specific to snapshots, where the snapshot is done in the top
level buffer, when it is supposed to snapshot the buffer associated
to the instance the snapshot trigger exists in"
* tag 'trace-v4.17-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Make the snapshot trigger work with instances
tracing: Fix crash when freeing instances with event triggers
The filter file in the ftrace internal events, like in
/sys/kernel/tracing/events/ftrace/function/filter is not attached to any
functionality. Do not create them as they are meaningless.
In the future, if an ftrace internal event gets filter functionality, then
it will need to create it directly.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The dynamic arrays defined for ftrace internal events, such as the buf field
for trace_marker (ftrace/print) did not have brackets which makes the filter
code not accept it as a string. This is not currently an issues because the
filter code doesn't do anything for these events, but they will in the
future, and this needs to be fixed for when it does.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Instead of having both trace_init_tracefs() and event_trace_init() be called
by fs_initcall() routines, have event_trace_init() called directly by
trace_init_tracefs(). This will guarantee order of how the events are
created with respect to the rest of the ftrace infrastructure. This is
needed to be able to assoctiate event files with ftrace internal events,
such as the trace_marker.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
By adding the function __find_event_file() that can search for files without
restrictions, such as if the event associated with the file has a reg
function, or if it has the "ignore" flag set, the files that are associated
to ftrace internal events (like trace_marker and function events) can be
found and used.
find_event_file() still returns a "filtered" file, as most callers need a
valid trace event file. One created by the trace_events.h macros and not one
created for parsing ftrace specific events.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Trace event triggers can be called before or after the event has been
committed. If it has been called after the commit, there's a possibility
that the event no longer exists. Currently, the two post callers is the
trigger to disable tracing (traceoff) and the one that will record a stack
dump (stacktrace). Neither of them reference the trace event entry record,
as that would lead to a race condition that could pass in corrupted data.
To prevent any other users of the post data triggers from using the trace
event record, pass in NULL to the post call trigger functions for the event
record, as they should never need to use them in the first place.
This does not fix any bug, but prevents bugs from happening by new post call
trigger users.
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The description of tracepoint_probe_register duplicates
with tracepoint_probe_register_prio. This patch cleans up
the descriptions.
Link: http://lkml.kernel.org/r/20170616082643.7311-1-jlee@suse.com
Signed-off-by: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The snapshot trigger currently only affects the main ring buffer, even when
it is used by the instances. This can be confusing as the snapshot trigger
is listed in the instance.
> # cd /sys/kernel/tracing
> # mkdir instances/foo
> # echo snapshot > instances/foo/events/syscalls/sys_enter_fchownat/trigger
> # echo top buffer > trace_marker
> # echo foo buffer > instances/foo/trace_marker
> # touch /tmp/bar
> # chown rostedt /tmp/bar
> # cat instances/foo/snapshot
# tracer: nop
#
#
# * Snapshot is freed *
#
# Snapshot commands:
# echo 0 > snapshot : Clears and frees snapshot buffer
# echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
# Takes a snapshot of the main buffer.
# echo 2 > snapshot : Clears snapshot buffer (but does not allocate or free)
# (Doesn't have to be '2' works with any number that
# is not a '0' or '1')
> # cat snapshot
# tracer: nop
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
bash-1189 [000] .... 111.488323: tracing_mark_write: top buffer
Not only did the snapshot occur in the top level buffer, but the instance
snapshot buffer should have been allocated, and it is still free.
Cc: stable@vger.kernel.org
Fixes: 85f2b08268 ("tracing: Add basic event trigger framework")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In addition to already existing BPF hooks for sys_bind and sys_connect,
the patch provides new hooks for sys_sendmsg.
It leverages existing BPF program type `BPF_PROG_TYPE_CGROUP_SOCK_ADDR`
that provides access to socket itlself (properties like family, type,
protocol) and user-passed `struct sockaddr *` so that BPF program can
override destination IP and port for system calls such as sendto(2) or
sendmsg(2) and/or assign source IP to the socket.
The hooks are implemented as two new attach types:
`BPF_CGROUP_UDP4_SENDMSG` and `BPF_CGROUP_UDP6_SENDMSG` for UDPv4 and
UDPv6 correspondingly.
UDPv4 and UDPv6 separate attach types for same reason as sys_bind and
sys_connect hooks, i.e. to prevent reading from / writing to e.g.
user_ip6 fields when user passes sockaddr_in since it'd be out-of-bound.
The difference with already existing hooks is sys_sendmsg are
implemented only for unconnected UDP.
For TCP it doesn't make sense to change user-provided `struct sockaddr *`
at sendto(2)/sendmsg(2) time since socket either was already connected
and has source/destination set or wasn't connected and call to
sendto(2)/sendmsg(2) would lead to ENOTCONN anyway.
Connected UDP is already handled by sys_connect hooks that can override
source/destination at connect time and use fast-path later, i.e. these
hooks don't affect UDP fast-path.
Rewriting source IP is implemented differently than that in sys_connect
hooks. When sys_sendmsg is used with unconnected UDP it doesn't work to
just bind socket to desired local IP address since source IP can be set
on per-packet basis by using ancillary data (cmsg(3)). So no matter if
socket is bound or not, source IP has to be rewritten on every call to
sys_sendmsg.
To do so two new fields are added to UAPI `struct bpf_sock_addr`;
* `msg_src_ip4` to set source IPv4 for UDPv4;
* `msg_src_ip6` to set source IPv6 for UDPv6.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The stack_map_get_build_id_offset() function is too long for gcc to track
whether 'work' may or may not be initialized at the end of it, leading
to a false-positive warning:
kernel/bpf/stackmap.c: In function 'stack_map_get_build_id_offset':
kernel/bpf/stackmap.c:334:13: error: 'work' may be used uninitialized in this function [-Werror=maybe-uninitialized]
This removes the 'in_nmi_ctx' flag and uses the state of that variable
itself to see if it got initialized.
Fixes: bae77c5eb5 ("bpf: enable stackmap with build_id in nmi context")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
gcc warns about a noreturn function possibly returning in
some configurations:
kernel/bpf/btf.c: In function 'env_type_is_resolve_sink':
kernel/bpf/btf.c:729:1: error: control reaches end of non-void function [-Werror=return-type]
Using BUG() instead of BUG_ON() avoids that warning and otherwise
does the exact same thing.
Fixes: eb3f595dab ("bpf: btf: Validate type reference")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
If a instance has an event trigger enabled when it is freed, it could cause
an access of free memory. Here's the case that crashes:
# cd /sys/kernel/tracing
# mkdir instances/foo
# echo snapshot > instances/foo/events/initcall/initcall_start/trigger
# rmdir instances/foo
Would produce:
general protection fault: 0000 [#1] PREEMPT SMP PTI
Modules linked in: tun bridge ...
CPU: 5 PID: 6203 Comm: rmdir Tainted: G W 4.17.0-rc4-test+ #933
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016
RIP: 0010:clear_event_triggers+0x3b/0x70
RSP: 0018:ffffc90003783de0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 6b6b6b6b6b6b6b2b RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800c7130ba0
RBP: ffffc90003783e00 R08: ffff8801131993f8 R09: 0000000100230016
R10: ffffc90003783d80 R11: 0000000000000000 R12: ffff8800c7130ba0
R13: ffff8800c7130bd8 R14: ffff8800cc093768 R15: 00000000ffffff9c
FS: 00007f6f4aa86700(0000) GS:ffff88011eb40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6f4a5aed60 CR3: 00000000cd552001 CR4: 00000000001606e0
Call Trace:
event_trace_del_tracer+0x2a/0xc5
instance_rmdir+0x15c/0x200
tracefs_syscall_rmdir+0x52/0x90
vfs_rmdir+0xdb/0x160
do_rmdir+0x16d/0x1c0
__x64_sys_rmdir+0x17/0x20
do_syscall_64+0x55/0x1a0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
This was due to the call the clears out the triggers when an instance is
being deleted not removing the trigger from the link list.
Cc: stable@vger.kernel.org
Fixes: 85f2b08268 ("tracing: Add basic event trigger framework")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
syzbot is reporting NULL pointer dereference at snapshot_write() [1].
This is because data->handle is zero-cleared by ioctl(SNAPSHOT_FREE).
Fix this by checking data_of(data->handle) != NULL before using it.
[1] https://syzkaller.appspot.com/bug?id=828a3c71bd344a6de8b6a31233d51a72099f27fd
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+ae590932da6e45d6564d@syzkaller.appspotmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The `s2idle_lock' is acquired during suspend while interrupts are
disabled even on RT. The lock is acquired for short sections only.
Make it a RAW lock which avoids "sleeping while atomic" warnings on RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
s2idle_wait_head is used during s2idle with interrupts disabled even on
RT. There is no "custom" wake up function so swait could be used instead
which is also lower weight compared to the wait_queue.
Make s2idle_wait_head a swait_queue_head.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
timekeeping suspend/resume calls read_persistent_clock() which takes
rtc_lock. That results in might sleep warnings because at that point
we run with interrupts disabled.
We cannot convert rtc_lock to a raw spinlock as that would trigger
other might sleep warnings.
As a workaround we disable the might sleep warnings by setting
system_state to SYSTEM_SUSPEND before calling sysdev_suspend() and
restoring it to SYSTEM_RUNNING afer sysdev_resume(). There is no lock
contention because hibernate / suspend to RAM is single-CPU at this
point.
In s2idle's case the system_state is set to SYSTEM_SUSPEND before
timekeeping_suspend() which is invoked by the last CPU. In the resume
case it set back to SYSTEM_RUNNING after timekeeping_resume() which is
invoked by the first CPU in the resume case. The other CPUs will block
on tick_freeze_lock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[bigeasy: cover s2idle in tick_freeze() / tick_unfreeze()]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull scheduler fixes from Thomas Gleixner:
"Three fixes for scheduler and kthread code:
- allow calling kthread_park() on an already parked thread
- restore the sched_pi_setprio() tracepoint behaviour
- clarify the unclear string for the scheduling domain debug output"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched, tracing: Fix trace_sched_pi_setprio() for deboosting
kthread: Allow kthread_park() on a parked kthread
sched/topology: Clarify root domain(s) debug string
Merge misc fixes from Andrew Morton:
"16 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kasan: fix memory hotplug during boot
kasan: free allocated shadow memory on MEM_CANCEL_ONLINE
checkpatch: fix macro argument precedence test
init/main.c: include <linux/mem_encrypt.h>
kernel/sys.c: fix potential Spectre v1 issue
mm/memory_hotplug: fix leftover use of struct page during hotplug
proc: fix smaps and meminfo alignment
mm: do not warn on offline nodes unless the specific node is explicitly requested
mm, memory_hotplug: make has_unmovable_pages more robust
mm/kasan: don't vfree() nonexistent vm_area
MAINTAINERS: change hugetlbfs maintainer and update files
ipc/shm: fix shmat() nil address after round-down when remapping
Revert "ipc/shm: Fix shmat mmap nil-page protection"
idr: fix invalid ptr dereference on item delete
ocfs2: revert "ocfs2/o2hb: check len for bio_add_page() to avoid getting incorrect bio"
mm: fix nr_rotate_swap leak in swapon() error case
Pull networking fixes from David Miller:
"Let's begin the holiday weekend with some networking fixes:
1) Whoops need to restrict cfg80211 wiphy names even more to 64
bytes. From Eric Biggers.
2) Fix flags being ignored when using kernel_connect() with SCTP,
from Xin Long.
3) Use after free in DCCP, from Alexey Kodanev.
4) Need to check rhltable_init() return value in ipmr code, from Eric
Dumazet.
5) XDP handling fixes in virtio_net from Jason Wang.
6) Missing RTA_TABLE in rtm_ipv4_policy[], from Roopa Prabhu.
7) Need to use IRQ disabling spinlocks in mlx4_qp_lookup(), from Jack
Morgenstein.
8) Prevent out-of-bounds speculation using indexes in BPF, from
Daniel Borkmann.
9) Fix regression added by AF_PACKET link layer cure, from Willem de
Bruijn.
10) Correct ENIC dma mask, from Govindarajulu Varadarajan.
11) Missing config options for PMTU tests, from Stefano Brivio"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (48 commits)
ibmvnic: Fix partial success login retries
selftests/net: Add missing config options for PMTU tests
mlx4_core: allocate ICM memory in page size chunks
enic: set DMA mask to 47 bit
ppp: remove the PPPIOCDETACH ioctl
ipv4: remove warning in ip_recv_error
net : sched: cls_api: deal with egdev path only if needed
vhost: synchronize IOTLB message with dev cleanup
packet: fix reserve calculation
net/mlx5: IPSec, Fix a race between concurrent sandbox QP commands
net/mlx5e: When RXFCS is set, add FCS data into checksum calculation
bpf: properly enforce index mask to prevent out-of-bounds speculation
net/mlx4: Fix irq-unsafe spinlock usage
net: phy: broadcom: Fix bcm_write_exp()
net: phy: broadcom: Fix auxiliary control register reads
net: ipv4: add missing RTA_TABLE to rtm_ipv4_policy
net/mlx4: fix spelling mistake: "Inrerface" -> "Interface" and rephrase message
ibmvnic: Only do H_EOI for mobility events
tuntap: correctly set SOCKWQ_ASYNC_NOSPACE
virtio-net: fix leaking page for gso packet during mergeable XDP
...
`resource' can be controlled by user-space, hence leading to a potential
exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
kernel/sys.c:1474 __do_compat_sys_old_getrlimit() warn: potential spectre issue 'get_current()->signal->rlim' (local cap)
kernel/sys.c:1455 __do_sys_old_getrlimit() warn: potential spectre issue 'get_current()->signal->rlim' (local cap)
Fix this by sanitizing *resource* before using it to index
current->signal->rlim
Notice that given that speculation windows are large, the policy is to
kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Link: http://lkml.kernel.org/r/20180515030038.GA11822@embeddedor.com
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Borkmann says:
====================
pull-request: bpf 2018-05-24
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a bug in the original fix to prevent out of bounds speculation when
multiple tail call maps from different branches or calls end up at the
same tail call helper invocation, from Daniel.
2) Two selftest fixes, one in reuseport_bpf_numa where test is skipped in
case of missing numa support and another one to update kernel config to
properly support xdp_meta.sh test, from Anders.
...
Would be great if you have a chance to merge net into net-next after that.
The verifier fix would be needed later as a dependency in bpf-next for
upcomig work there. When you do the merge there's a trivial conflict on
BPF side with 849fa50662 ("bpf/verifier: refine retval R0 state for
bpf_get_stack helper"): Resolution is to keep both functions, the
do_refine_retval_range() and record_func_map().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the trivial owner_on_cpu() helper for rwsem_can_spin_on_owner() and
rwsem_spin_on_owner(), it also allows to make rwsem_can_spin_on_owner()
a bit more clear.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jan Kara <jack@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Theodore Y. Ts'o <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180518165534.GA22348@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since pointer size is different in compat, and switching in _perf_ioctl
is done using exact ioctl numbers, all new ioctl numbers that use pointer
should be added to perf_compat_ioctl for _IOC_SIZE fixup before passing
to perf_ioctl routine (this shouldn't be needed if semantics of the size
argument of _IO* macros was honored).
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20180521123420.GA24291@asgard.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As Miklos reported and suggested:
"This pattern repeats two times in trace_uprobe.c and in
kernel/events/core.c as well:
ret = kern_path(filename, LOOKUP_FOLLOW, &path);
if (ret)
goto fail_address_parse;
inode = igrab(d_inode(path.dentry));
path_put(&path);
And it's wrong. You can only hold a reference to the inode if you
have an active ref to the superblock as well (which is normally
through path.mnt) or holding s_umount.
This way unmounting the containing filesystem while the tracepoint is
active will give you the "VFS: Busy inodes after unmount..." message
and a crash when the inode is finally put.
Solution: store path instead of inode."
This patch fixes the issue in kernel/event/core.c.
Reviewed-and-tested-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reported-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <kernel-team@fb.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 375637bc52 ("perf/core: Introduce address range filtering")
Link: http://lkml.kernel.org/r/20180418062907.3210386-2-songliubraving@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When hw and sw events are mixed in the same group, they are all attached
to the hw perf_event_context. This sometimes requires moving group of
perf_event to a different context.
We found a bug in how the kernel handles this, for example if we do:
perf stat -e '{faults,ref-cycles,faults}' -I 1000
1.005591180 1,297 faults
1.005591180 457,476,576 ref-cycles
1.005591180 <not supported> faults
First, sw event "faults" is attached to the sw context, and becomes the
group leader. Then, hw event "ref-cycles" is attached, so both events
are moved to the hw context. Last, another sw "faults" tries to attach,
but it fails because of mismatch between the new target ctx (from sw
pmu) and the group_leader's ctx (hw context, same as ref-cycles).
The broken condition is:
group_leader is sw event;
group_leader is on hw context;
add a sw event to the group.
Fix this scenario by checking group_leader's context (instead of just
event type). If group_leader is on hw context, use the ->pmu of this
context to look up context for the new event.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <kernel-team@fb.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: b04243ef70 ("perf: Complete software pmu grouping")
Link: http://lkml.kernel.org/r/20180503194716.162815-1-songliubraving@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When a task is enqueued the estimated utilization of a CPU is updated
to better support the selection of the required frequency.
However, schedutil is (implicitly) updated by update_load_avg() which
always happens before util_est_{en,de}queue(), thus potentially
introducing a latency between estimated utilization updates and
frequency selections.
Let's update util_est at the beginning of enqueue_task_fair(),
which will ensure that all schedutil updates will see the most
updated estimated utilization value for a CPU.
Reported-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Fixes: 7f65ea42eb ("sched/fair: Add util_est on top of PELT")
Link: http://lkml.kernel.org/r/20180524141023.13765-3-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since the refactoring introduced by:
commit 8f111bc357 ("cpufreq/schedutil: Rewrite CPUFREQ_RT support")
we aggregate FAIR utilization only if this class has runnable tasks.
This was mainly due to avoid the risk to stay on an high frequency just
because of the blocked utilization of a CPU not being properly decayed
while the CPU was idle.
However, since:
commit 31e77c93e4 ("sched/fair: Update blocked load when newly idle")
the FAIR blocked utilization is properly decayed also for IDLE CPUs.
This allows us to use the FAIR blocked utilization as a safe mechanism
to gracefully reduce the frequency only if no FAIR tasks show up on a
CPU for a reasonable period of time.
Moreover, we also reduce the frequency drops of CPUs running periodic
tasks which, depending on the task periodicity and the time required
for a frequency switch, was increasing the chances to introduce some
undesirable performance variations.
Reported-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Link: http://lkml.kernel.org/r/20180524141023.13765-2-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The following commit:
85f1abe001 ("kthread, sched/wait: Fix kthread_parkme() completion issue")
added a WARN() in the case where we call kthread_park() on an already
parked thread, because the old code wasn't doing the right thing there
and it wasn't at all clear that would happen.
It turns out, this does in fact happen, so we have to deal with it.
Instead of potentially returning early, also wait for the completion.
This does however mean we have to use complete_all() and re-initialize
the completion on re-use.
Reported-by: LKP <lkp@01.org>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel test robot <lkp@intel.com>
Cc: wfg@linux.intel.com
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 85f1abe001 ("kthread, sched/wait: Fix kthread_parkme() completion issue")
Link: http://lkml.kernel.org/r/20180504091142.GI12235@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2018-05-24
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Björn Töpel cleans up AF_XDP (removes rebind, explicit cache alignment from uapi, etc).
2) David Ahern adds mtu checks to bpf_ipv{4,6}_fib_lookup() helpers.
3) Jesper Dangaard Brouer adds bulking support to ndo_xdp_xmit.
4) Jiong Wang adds support for indirect and arithmetic shifts to NFP
5) Martin KaFai Lau cleans up BTF uapi and makes the btf_header extensible.
6) Mathieu Xhonneux adds an End.BPF action to seg6local with BPF helpers allowing
to edit/grow/shrink a SRH and apply on a packet generic SRv6 actions.
7) Sandipan Das adds support for bpf2bpf function calls in ppc64 JIT.
8) Yonghong Song adds BPF_TASK_FD_QUERY command for introspection of tracing events.
9) other misc fixes from Gustavo A. R. Silva, Sirio Balmelli, John Fastabend, and Magnus Karlsson
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Extending tracepoint xdp:xdp_devmap_xmit in devmap with an err code
allow people to easier identify the reason behind the ndo_xdp_xmit
call to a given driver is failing.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch change the API for ndo_xdp_xmit to support bulking
xdp_frames.
When kernel is compiled with CONFIG_RETPOLINE, XDP sees a huge slowdown.
Most of the slowdown is caused by DMA API indirect function calls, but
also the net_device->ndo_xdp_xmit() call.
Benchmarked patch with CONFIG_RETPOLINE, using xdp_redirect_map with
single flow/core test (CPU E5-1650 v4 @ 3.60GHz), showed
performance improved:
for driver ixgbe: 6,042,682 pps -> 6,853,768 pps = +811,086 pps
for driver i40e : 6,187,169 pps -> 6,724,519 pps = +537,350 pps
With frames avail as a bulk inside the driver ndo_xdp_xmit call,
further optimizations are possible, like bulk DMA-mapping for TX.
Testing without CONFIG_RETPOLINE show the same performance for
physical NIC drivers.
The virtual NIC driver tun sees a huge performance boost, as it can
avoid doing per frame producer locking, but instead amortize the
locking cost over the bulk.
V2: Fix compile errors reported by kbuild test robot <lkp@intel.com>
V4: Isolated ndo, driver changes and callers.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When sending an xdp_frame through xdp_do_redirect call, then error
cases can happen where the xdp_frame needs to be dropped, and
returning an -errno code isn't sufficient/possible any-longer
(e.g. for cpumap case). This is already fully supported, by simply
calling xdp_return_frame.
This patch is an optimization, which provides xdp_return_frame_rx_napi,
which is a faster variant for these error cases. It take advantage of
the protection provided by XDP RX running under NAPI protection.
This change is mostly relevant for drivers using the page_pool
allocator as it can take advantage of this. (Tested with mlx5).
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Notice how this allow us get XDP statistic without affecting the XDP
performance, as tracepoint is no-longer activated on a per packet basis.
V5: Spotted by John Fastabend.
Fix 'sent' also counted 'drops' in this patch, a later patch corrected
this, but it was a mistake in this intermediate step.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Like cpumap create queue for xdp frames that will be bulked. For now,
this patch simply invoke ndo_xdp_xmit foreach frame. This happens,
either when the map flush operation is envoked, or when the limit
DEV_MAP_BULK_SIZE is reached.
V5: Avoid memleak on error path in dev_map_update_elem()
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Functionality is the same, but the ndo_xdp_xmit call is now
simply invoked from inside the devmap.c code.
V2: Fix compile issue reported by kbuild test robot <lkp@intel.com>
V5: Cleanups requested by Daniel
- Newlines before func definition
- Use BUILD_BUG_ON checks
- Remove unnecessary use return value store in dev_map_enqueue
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, suppose a userspace application has loaded a bpf program
and attached it to a tracepoint/kprobe/uprobe, and a bpf
introspection tool, e.g., bpftool, wants to show which bpf program
is attached to which tracepoint/kprobe/uprobe. Such attachment
information will be really useful to understand the overall bpf
deployment in the system.
There is a name field (16 bytes) for each program, which could
be used to encode the attachment point. There are some drawbacks
for this approaches. First, bpftool user (e.g., an admin) may not
really understand the association between the name and the
attachment point. Second, if one program is attached to multiple
places, encoding a proper name which can imply all these
attachments becomes difficult.
This patch introduces a new bpf subcommand BPF_TASK_FD_QUERY.
Given a pid and fd, if the <pid, fd> is associated with a
tracepoint/kprobe/uprobe perf event, BPF_TASK_FD_QUERY will return
. prog_id
. tracepoint name, or
. k[ret]probe funcname + offset or kernel addr, or
. u[ret]probe filename + offset
to the userspace.
The user can use "bpftool prog" to find more information about
bpf program itself with prog_id.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A new extern function, perf_get_event(), is added to return a perf event
given a struct file. This function will be used in later patches.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
While reviewing the verifier code, I recently noticed that the
following two program variants in relation to tail calls can be
loaded.
Variant 1:
# bpftool p d x i 15
0: (15) if r1 == 0x0 goto pc+3
1: (18) r2 = map[id:5]
3: (05) goto pc+2
4: (18) r2 = map[id:6]
6: (b7) r3 = 7
7: (35) if r3 >= 0xa0 goto pc+2
8: (54) (u32) r3 &= (u32) 255
9: (85) call bpf_tail_call#12
10: (b7) r0 = 1
11: (95) exit
# bpftool m s i 5
5: prog_array flags 0x0
key 4B value 4B max_entries 4 memlock 4096B
# bpftool m s i 6
6: prog_array flags 0x0
key 4B value 4B max_entries 160 memlock 4096B
Variant 2:
# bpftool p d x i 20
0: (15) if r1 == 0x0 goto pc+3
1: (18) r2 = map[id:8]
3: (05) goto pc+2
4: (18) r2 = map[id:7]
6: (b7) r3 = 7
7: (35) if r3 >= 0x4 goto pc+2
8: (54) (u32) r3 &= (u32) 3
9: (85) call bpf_tail_call#12
10: (b7) r0 = 1
11: (95) exit
# bpftool m s i 8
8: prog_array flags 0x0
key 4B value 4B max_entries 160 memlock 4096B
# bpftool m s i 7
7: prog_array flags 0x0
key 4B value 4B max_entries 4 memlock 4096B
In both cases the index masking inserted by the verifier in order
to control out of bounds speculation from a CPU via b2157399cc
("bpf: prevent out-of-bounds speculation") seems to be incorrect
in what it is enforcing. In the 1st variant, the mask is applied
from the map with the significantly larger number of entries where
we would allow to a certain degree out of bounds speculation for
the smaller map, and in the 2nd variant where the mask is applied
from the map with the smaller number of entries, we get buggy
behavior since we truncate the index of the larger map.
The original intent from commit b2157399cc is to reject such
occasions where two or more different tail call maps are used
in the same tail call helper invocation. However, the check on
the BPF_MAP_PTR_POISON is never hit since we never poisoned the
saved pointer in the first place! We do this explicitly for map
lookups but in case of tail calls we basically used the tail
call map in insn_aux_data that was processed in the most recent
path which the verifier walked. Thus any prior path that stored
a pointer in insn_aux_data at the helper location was always
overridden.
Fix it by moving the map pointer poison logic into a small helper
that covers both BPF helpers with the same logic. After that in
fixup_bpf_calls() the poison check is then hit for tail calls
and the program rejected. Latter only happens in unprivileged
case since this is the *only* occasion where a rewrite needs to
happen, and where such rewrite is specific to the map (max_entries,
index_mask). In the privileged case the rewrite is generic for
the insn->imm / insn->code update so multiple maps from different
paths can be handled just fine since all the remaining logic
happens in the instruction processing itself. This is similar
to the case of map lookups: in case there is a collision of
maps in fixup_bpf_calls() we must skip the inlined rewrite since
this will turn the generic instruction sequence into a non-
generic one. Thus the patch_call_imm will simply update the
insn->imm location where the bpf_map_lookup_elem() will later
take care of the dispatch. Given we need this 'poison' state
as a check, the information of whether a map is an unpriv_array
gets lost, so enforcing it prior to that needs an additional
state. In general this check is needed since there are some
complex and tail call intensive BPF programs out there where
LLVM tends to generate such code occasionally. We therefore
convert the map_ptr rather into map_state to store all this
w/o extra memory overhead, and the bit whether one of the maps
involved in the collision was from an unpriv_array thus needs
to be retained as well there.
Fixes: b2157399cc ("bpf: prevent out-of-bounds speculation")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds the End.BPF action to the LWT seg6local infrastructure.
This action works like any other seg6local End action, meaning that an IPv6
header with SRH is needed, whose DA has to be equal to the SID of the
action. It will also advance the SRH to the next segment, the BPF program
does not have to take care of this.
Since the BPF program may not be a source of instability in the kernel, it
is important to ensure that the integrity of the packet is maintained
before yielding it back to the IPv6 layer. The hook hence keeps track if
the SRH has been altered through the helpers, and re-validates its
content if needed with seg6_validate_srh. The state kept for validation is
stored in a per-CPU buffer. The BPF program is not allowed to directly
write into the packet, and only some fields of the SRH can be altered
through the helper bpf_lwt_seg6_store_bytes.
Performances profiling has shown that the SRH re-validation does not induce
a significant overhead. If the altered SRH is deemed as invalid, the packet
is dropped.
This validation is also done before executing any action through
bpf_lwt_seg6_action, and will not be performed again if the SRH is not
modified after calling the action.
The BPF program may return 3 types of return codes:
- BPF_OK: the End.BPF action will look up the next destination through
seg6_lookup_nexthop.
- BPF_REDIRECT: if an action has been executed through the
bpf_lwt_seg6_action helper, the BPF program should return this
value, as the skb's destination is already set and the default
lookup should not be performed.
- BPF_DROP : the packet will be dropped.
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Acked-by: David Lebrun <dlebrun@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit 152db033d7 (schedutil: Allow cpufreq requests to be made
even when kthread kicked) made changes to prevent utilization updates
from being discarded during processing a previous request, but it
left a small window in which that still can happen in the one-CPU
policy case. Namely, updates coming in after setting work_in_progress
in sugov_update_commit() and clearing it in sugov_work() will still
be dropped due to the work_in_progress check in sugov_update_single().
To close that window, rearrange the code so as to acquire the update
lock around the deferred update branch in sugov_update_single()
and drop the work_in_progress check from it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
This adds new two new fields to struct bpf_prog_info. For
multi-function programs, these fields can be used to pass
a list of the JITed image lengths of each function for a
given program to userspace using the bpf system call with
the BPF_OBJ_GET_INFO_BY_FD command.
This can be used by userspace applications like bpftool
to split up the contiguous JITed dump, also obtained via
the system call, into more relatable chunks corresponding
to each function.
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently, for multi-function programs, we cannot get the JITed
instructions using the bpf system call's BPF_OBJ_GET_INFO_BY_FD
command. Because of this, userspace tools such as bpftool fail
to identify a multi-function program as being JITed or not.
With the JIT enabled and the test program running, this can be
verified as follows:
# cat /proc/sys/net/core/bpf_jit_enable
1
Before applying this patch:
# bpftool prog list
1: kprobe name foo tag b811aab41a39ad3d gpl
loaded_at 2018-05-16T11:43:38+0530 uid 0
xlated 216B not jited memlock 65536B
...
# bpftool prog dump jited id 1
no instructions returned
After applying this patch:
# bpftool prog list
1: kprobe name foo tag b811aab41a39ad3d gpl
loaded_at 2018-05-16T12:13:01+0530 uid 0
xlated 216B jited 308B memlock 65536B
...
# bpftool prog dump jited id 1
0: nop
4: nop
8: mflr r0
c: std r0,16(r1)
10: stdu r1,-112(r1)
14: std r31,104(r1)
18: addi r31,r1,48
1c: li r3,10
...
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This adds new two new fields to struct bpf_prog_info. For
multi-function programs, these fields can be used to pass
a list of kernel symbol addresses for all functions in a
given program to userspace using the bpf system call with
the BPF_OBJ_GET_INFO_BY_FD command.
When bpf_jit_kallsyms is enabled, we can get the address
of the corresponding kernel symbol for a callee function
and resolve the symbol's name. The address is determined
by adding the value of the call instruction's imm field
to __bpf_call_base. This offset gets assigned to the imm
field by the verifier.
For some architectures, such as powerpc64, the imm field
is not large enough to hold this offset.
We resolve this by:
[1] Assigning the subprog id to the imm field of a call
instruction in the verifier instead of the offset of
the callee's symbol's address from __bpf_call_base.
[2] Determining the address of a callee's corresponding
symbol by using the imm field as an index for the
list of kernel symbol addresses now available from
the program info.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The imm field of a bpf instruction is a signed 32-bit integer.
For JITed bpf-to-bpf function calls, it holds the offset of the
start address of the callee's JITed image from __bpf_call_base.
For some architectures, such as powerpc64, this offset may be
as large as 64 bits and cannot be accomodated in the imm field
without truncation.
We resolve this by:
[1] Additionally using the auxiliary data of each function to
keep a list of start addresses of the JITed images for all
functions determined by the verifier.
[2] Retaining the subprog id inside the off field of the call
instructions and using it to index into the list mentioned
above and lookup the callee's address.
To make sure that the existing JIT compilers continue to work
without requiring changes, we keep the imm field as it is.
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Sparse warning:
kernel/bpf/btf.c:1985:34: warning: Variable length array is used.
This patch directly uses ARRAY_SIZE().
Fixes: f80442a4cd ("bpf: btf: Change how section is supported in btf_header")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
In commit 7ee681b252 ("workqueue: Convert to state machine callbacks"),
three new function definitions were added: ‘workqueue_prepare_cpu’,
‘workqueue_online_cpu’ and ‘workqueue_offline_cpu’.
Move these function definitions within a CONFIG_SMP block since they are
not used outside of it. This will match function declarations in header
<include/linux/workqueue.h>, and silence the following gcc warning (W=1):
kernel/workqueue.c:4743:5: warning: no previous prototype for ‘workqueue_prepare_cpu’ [-Wmissing-prototypes]
kernel/workqueue.c:4756:5: warning: no previous prototype for ‘workqueue_online_cpu’ [-Wmissing-prototypes]
kernel/workqueue.c:4783:5: warning: no previous prototype for ‘workqueue_offline_cpu’ [-Wmissing-prototypes]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
cgroup_enable_task_cg_lists() incorrectly nests non-irq-safe
tasklist_lock inside irq-safe css_set_lock triggering the following
lockdep warning.
WARNING: possible irq lock inversion dependency detected
4.17.0-rc1-00027-gb37d049 #6 Not tainted
--------------------------------------------------------
systemd/1 just changed the state of lock:
00000000fe57773b (css_set_lock){..-.}, at: cgroup_free+0xf2/0x12a
but this lock took another, SOFTIRQ-unsafe lock in the past:
(tasklist_lock){.+.+}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(tasklist_lock);
local_irq_disable();
lock(css_set_lock);
lock(tasklist_lock);
<Interrupt>
lock(css_set_lock);
*** DEADLOCK ***
The condition is highly unlikely to actually happen especially given
that the path is executed only once per boot.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Introduce helper:
int fork_usermode_blob(void *data, size_t len, struct umh_info *info);
struct umh_info {
struct file *pipe_to_umh;
struct file *pipe_from_umh;
pid_t pid;
};
that GPLed kernel modules (signed or unsigned) can use it to execute part
of its own data as swappable user mode process.
The kernel will do:
- allocate a unique file in tmpfs
- populate that file with [data, data + len] bytes
- user-mode-helper code will do_execve that file and, before the process
starts, the kernel will create two unix pipes for bidirectional
communication between kernel module and umh
- close tmpfs file, effectively deleting it
- the fork_usermode_blob will return zero on success and populate
'struct umh_info' with two unix pipes and the pid of the user process
As the first step in the development of the bpfilter project
the fork_usermode_blob() helper is introduced to allow user mode code
to be invoked from a kernel module. The idea is that user mode code plus
normal kernel module code are built as part of the kernel build
and installed as traditional kernel module into distro specified location,
such that from a distribution point of view, there is
no difference between regular kernel modules and kernel modules + umh code.
Such modules can be signed, modprobed, rmmod, etc. The use of this new helper
by a kernel module doesn't make it any special from kernel and user space
tooling point of view.
Such approach enables kernel to delegate functionality traditionally done
by the kernel modules into the user space processes (either root or !root) and
reduces security attack surface of the new code. The buggy umh code would crash
the user process, but not the kernel. Another advantage is that umh code
of the kernel module can be debugged and tested out of user space
(e.g. opening the possibility to run clang sanitizers, fuzzers or
user space test suites on the umh code).
In case of the bpfilter project such architecture allows complex control plane
to be done in the user space while bpf based data plane stays in the kernel.
Since umh can crash, can be oom-ed by the kernel, killed by the admin,
the kernel module that uses them (like bpfilter) needs to manage life
time of umh on its own via two unix pipes and the pid of umh.
The exit code of such kernel module should kill the umh it started,
so that rmmod of the kernel module will cleanup the corresponding umh.
Just like if the kernel module does kmalloc() it should kfree() it
in the exit code.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In "struct bpf_map_info", the name "btf_id", "btf_key_id" and "btf_value_id"
could cause confusion because the "id" of "btf_id" means the BPF obj id
given to the BTF object while
"btf_key_id" and "btf_value_id" means the BTF type id within
that BTF object.
To make it clear, btf_key_id and btf_value_id are
renamed to btf_key_type_id and btf_value_type_id.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch does the followings:
1. Limit BTF_MAX_TYPES and BTF_MAX_NAME_OFFSET to 64k. We can
raise it later.
2. Remove the BTF_TYPE_PARENT and BTF_STR_TBL_ELF_ID. They are
currently encoded at the highest bit of a u32.
It is because the current use case does not require supporting
parent type (i.e type_id referring to a type in another BTF file).
It also does not support referring to a string in ELF.
The BTF_TYPE_PARENT and BTF_STR_TBL_ELF_ID checks are replaced
by BTF_TYPE_ID_CHECK and BTF_STR_OFFSET_CHECK which are
defined in btf.c instead of uapi/linux/btf.h.
3. Limit the BTF_INFO_KIND from 5 bits to 4 bits which is enough.
There is unused bits headroom if we ever needed it later.
4. The root bit in BTF_INFO is also removed because it is not
used in the current use case.
5. Remove BTF_INT_VARARGS since func type is not supported now.
The BTF_INT_ENCODING is limited to 4 bits instead of 8 bits.
The above can be added back later because the verifier
ensures the unused bits are zeros.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Instead of ingoring the array->index_type field. Enforce that
it must be a BTF_KIND_INT in size 1/2/4/8 bytes.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
There are currently unused section descriptions in the btf_header. Those
sections are here to support future BTF use cases. For example, the
func section (func_off) is to support function signature (e.g. the BPF
prog function signature).
Instead of spelling out all potential sections up-front in the btf_header.
This patch makes changes to btf_header such that extending it (e.g. adding
a section) is possible later. The unused ones can be removed for now and
they can be added back later.
This patch:
1. adds a hdr_len to the btf_header. It will allow adding
sections (and other info like parent_label and parent_name)
later. The check is similar to the existing bpf_attr.
If a user passes in a longer hdr_len, the kernel
ensures the extra tailing bytes are 0.
2. allows the section order in the BTF object to be
different from its sec_off order in btf_header.
3. each sec_off is followed by a sec_len. It must not have gap or
overlapping among sections.
The string section is ensured to be at the end due to the 4 bytes
alignment requirement of the type section.
The above changes will allow enough flexibility to
add new sections (and other info) to the btf_header later.
This patch also removes an unnecessary !err check
at the end of btf_parse().
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch exposes check_uarg_tail_zero() which will
be reused by a later BTF patch. Its name is changed to
bpf_check_uarg_tail_zero().
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently there is a chance of a schedutil cpufreq update request to be
dropped if there is a pending update request. This pending request can
be delayed if there is a scheduling delay of the irq_work and the wake
up of the schedutil governor kthread.
A very bad scenario is when a schedutil request was already just made,
such as to reduce the CPU frequency, then a newer request to increase
CPU frequency (even sched deadline urgent frequency increase requests)
can be dropped, even though the rate limits suggest that its Ok to
process a request. This is because of the way the work_in_progress flag
is used.
This patch improves the situation by allowing new requests to happen
even though the old one is still being processed. Note that in this
approach, if an irq_work was already issued, we just update next_freq
and don't bother to queue another request so there's no extra work being
done to make this happen.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This routine checks if the CPU running this code belongs to the policy
of the target CPU or if not, can it do remote DVFS for it remotely. But
the current name of it implies as if it is only about doing remote
updates.
Rename it to make it more relevant.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The x86/mtrr code does horrific things because hardware. It uses
stop_machine_from_inactive_cpu(), which does a wakeup (of the stopper
thread on another CPU), which uses RCU, all before the CPU is onlined.
RCU complains about this, because wakeups use RCU and RCU does
(rightfully) not consider offline CPUs for grace-periods.
Fix this by initializing RCU way early in the MTRR case.
Tested-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Add !SMP support, per 0day Test Robot report. ]
In preparation for fixing dax-dma-vs-unmap issues, filesystems need to
be able to rely on the fact that they will get wakeups on dev_pagemap
page-idle events. Introduce MEMORY_DEVICE_FS_DAX and
generic_dax_page_free() as common indicator / infrastructure for dax
filesytems to require. With this change there are no users of the
MEMORY_DEVICE_HOST designation, so remove it.
The HMM sub-system extended dev_pagemap to arrange a callback when a
dev_pagemap managed page is freed. Since a dev_pagemap page is free /
idle when its reference count is 1 it requires an additional branch to
check the page-type at put_page() time. Given put_page() is a hot-path
we do not want to incur that check if HMM is not in use, so a static
branch is used to avoid that overhead when not necessary.
Now, the FS_DAX implementation wants to reuse this mechanism for
receiving dev_pagemap ->page_free() callbacks. Rework the HMM-specific
static-key into a generic mechanism that either HMM or FS_DAX code paths
can enable.
For ARCH=um builds, and any other arch that lacks ZONE_DEVICE support,
care must be taken to compile out the DEV_PAGEMAP_OPS infrastructure.
However, we still need to support FS_DAX in the FS_DAX_LIMITED case
implemented by the s390/dcssblk driver.
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Thomas Meyer <thomas@m3y3r.de>
Reported-by: Dave Jiang <dave.jiang@intel.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The iowait boosting code has been recently updated to add a progressive
boosting behavior which allows to be less aggressive in boosting tasks
doing only sporadic IO operations, thus being more energy efficient for
example on mobile platforms.
The current code is now however a bit convoluted. Some functionalities
(e.g. iowait boost reset) are replicated in different paths and their
documentation is slightly misaligned.
Let's cleanup the code by consolidating all the IO wait boosting related
functionality within within few dedicated functions and better define
their role:
- sugov_iowait_boost: set/increase the IO wait boost of a CPU
- sugov_iowait_apply: apply/reduce the IO wait boost of a CPU
Both these two function are used at every sugov update and they make
use of a unified IO wait boost reset policy provided by:
- sugov_iowait_reset: reset/disable the IO wait boost of a CPU
if a CPU is not updated for more then one tick
This makes possible a cleaner and more self-contained design for the IO
wait boosting code since the rest of the sugov update routines, both for
single and shared frequency domains, follow the same template:
/* Configure IO boost, if required */
sugov_iowait_boost()
/* Return here if freq change is in progress or throttled */
/* Collect and aggregate utilization information */
sugov_get_util()
sugov_aggregate_util()
/*
* Add IO boost, if currently enabled, on top of the aggregated
* utilization value
*/
sugov_iowait_apply()
As a extra bonus, let's also add the documentation for the new
functions and better align the in-code documentation.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A more energy efficient update of the IO wait boosting mechanism has
been introduced in:
commit a5a0809bc5 ("cpufreq: schedutil: Make iowait boost more energy efficient")
where the boost value is expected to be:
- doubled at each successive wakeup from IO
staring from the minimum frequency supported by a CPU
- reset when a CPU is not updated for more then one tick
by either disabling the IO wait boost or resetting its value to the
minimum frequency if this new update requires an IO boost.
This approach is supposed to "ignore" boosting for sporadic wakeups from
IO, while still getting the frequency boosted to the maximum to benefit
long sequence of wakeup from IO operations.
However, these assumptions are not always satisfied.
For example, when an IO boosted CPU enters idle for more the one tick
and then wakes up after an IO wait, since in sugov_set_iowait_boost() we
first check the IOWAIT flag, we keep doubling the iowait boost instead
of restarting from the minimum frequency value.
This misbehavior could happen mainly on non-shared frequency domains,
thus defeating the energy efficiency optimization, but it can also
happen on shared frequency domain systems.
Let fix this issue in sugov_set_iowait_boost() by:
- first check the IO wait boost reset conditions
to eventually reset the boost value
- then applying the correct IO boost value
if required by the caller
Fixes: a5a0809bc5 (cpufreq: schedutil: Make iowait boost more energy efficient)
Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
S390 bpf_jit.S is removed in net-next and had changes in 'net',
since that code isn't used any more take the removal.
TLS data structures split the TX and RX components in 'net-next',
put the new struct members from the bug fix in 'net' into the RX
part.
The 'net-next' tree had some reworking of how the ERSPAN code works in
the GRE tunneling code, overlapping with a one-line headroom
calculation fix in 'net'.
Overlapping changes in __sock_map_ctx_update_elem(), keep the bits
that read the prog members via READ_ONCE() into local variables
before using them.
Signed-off-by: David S. Miller <davem@davemloft.net>
The audit_filter_rules() function in auditsc.c compared the session ID
with the credentials of the current task, while it should use the
credentials of the task given to audit_filter_rules() as a parameter
(tsk).
GitHub issue:
https://github.com/linux-audit/audit-kernel/issues/82
Fixes: 8fae477056 ("audit: add support for session ID user filter")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
[PM: not user visible, dropped stable]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Merge speculative store buffer bypass fixes from Thomas Gleixner:
- rework of the SPEC_CTRL MSR management to accomodate the new fancy
SSBD (Speculative Store Bypass Disable) bit handling.
- the CPU bug and sysfs infrastructure for the exciting new Speculative
Store Bypass 'feature'.
- support for disabling SSB via LS_CFG MSR on AMD CPUs including
Hyperthread synchronization on ZEN.
- PRCTL support for dynamic runtime control of SSB
- SECCOMP integration to automatically disable SSB for sandboxed
processes with a filter flag for opt-out.
- KVM integration to allow guests fiddling with SSBD including the new
software MSR VIRT_SPEC_CTRL to handle the LS_CFG based oddities on
AMD.
- BPF protection against SSB
.. this is just the core and x86 side, other architecture support will
come separately.
* 'speck-v20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
bpf: Prevent memory disambiguation attack
x86/bugs: Rename SSBD_NO to SSB_NO
KVM: SVM: Implement VIRT_SPEC_CTRL support for SSBD
x86/speculation, KVM: Implement support for VIRT_SPEC_CTRL/LS_CFG
x86/bugs: Rework spec_ctrl base and mask logic
x86/bugs: Remove x86_spec_ctrl_set()
x86/bugs: Expose x86_spec_ctrl_base directly
x86/bugs: Unify x86_spec_ctrl_{set_guest,restore_host}
x86/speculation: Rework speculative_store_bypass_update()
x86/speculation: Add virtualized speculative store bypass disable support
x86/bugs, KVM: Extend speculation control for VIRT_SPEC_CTRL
x86/speculation: Handle HT correctly on AMD
x86/cpufeatures: Add FEATURE_ZEN
x86/cpufeatures: Disentangle SSBD enumeration
x86/cpufeatures: Disentangle MSR_SPEC_CTRL enumeration from IBRS
x86/speculation: Use synthetic bits for IBRS/IBPB/STIBP
KVM: SVM: Move spec control call after restore of GS
x86/cpu: Make alternative_msr_write work for 32-bit code
x86/bugs: Fix the parameters alignment and missing void
x86/bugs: Make cpu_show_common() static
...
Pull networking fixes from David Miller:
1) Fix refcounting bug for connections in on-packet scheduling mode of
IPVS, from Julian Anastasov.
2) Set network header properly in AF_PACKET's packet_snd, from Willem
de Bruijn.
3) Fix regressions in 3c59x by converting to generic DMA API. It was
relying upon the hack that the PCI DMA interfaces would accept NULL
for EISA devices. From Christoph Hellwig.
4) Remove RDMA devices before unregistering netdev in QEDE driver, from
Michal Kalderon.
5) Use after free in TUN driver ptr_ring usage, from Jason Wang.
6) Properly check for missing netlink attributes in SMC_PNETID
requests, from Eric Biggers.
7) Set DMA mask before performaing any DMA operations in vmxnet3
driver, from Regis Duchesne.
8) Fix mlx5 build with SMP=n, from Saeed Mahameed.
9) Classifier fixes in bcm_sf2 driver from Florian Fainelli.
10) Tuntap use after free during release, from Jason Wang.
11) Don't use stack memory in scatterlists in tls code, from Matt
Mullins.
12) Not fully initialized flow key object in ipv4 routing code, from
David Ahern.
13) Various packet headroom bug fixes in ip6_gre driver, from Petr
Machata.
14) Remove queues from XPS maps using correct index, from Amritha
Nambiar.
15) Fix use after free in sock_diag, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (64 commits)
net: ip6_gre: fix tunnel metadata device sharing.
cxgb4: fix offset in collecting TX rate limit info
net: sched: red: avoid hashing NULL child
sock_diag: fix use-after-free read in __sk_free
sh_eth: Change platform check to CONFIG_ARCH_RENESAS
net: dsa: Do not register devlink for unused ports
net: Fix a bug in removing queues from XPS map
bpf: fix truncated jump targets on heavy expansions
bpf: parse and verdict prog attach may race with bpf map update
bpf: sockmap update rollback on error can incorrectly dec prog refcnt
net: test tailroom before appending to linear skb
net: ip6_gre: Fix ip6erspan hlen calculation
net: ip6_gre: Split up ip6gre_changelink()
net: ip6_gre: Split up ip6gre_newlink()
net: ip6_gre: Split up ip6gre_tnl_change()
net: ip6_gre: Split up ip6gre_tnl_link_config()
net: ip6_gre: Fix headroom request in ip6erspan_tunnel_xmit()
net: ip6_gre: Request headroom in __gre6_xmit()
selftests/bpf: check return value of fopen in test_verifier.c
erspan: fix invalid erspan version.
...
The worker struct could already be freed when wq_worker_comm() tries
to access it for reporting. This patch protects PF_WQ_WORKER
modifications with wq_pool_attach_mutex and makes wq_worker_comm()
test the flag before dereferencing worker from kthread_data(), which
ensures that it only dereferences when the worker struct is valid.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Lai Jiangshan <jiangshanlai@gmail.com>
Fixes: 6b59808bfe ("workqueue: Show the latest workqueue name in /proc/PID/{comm,stat,status}")
Pull UP timer fix from Thomas Gleixner:
"Work around the for_each_cpu() oddity on UP kernels in the tick
broadcast code which causes boot failures because the CPU0 bit is
always reported as set independent of the cpumask content"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/broadcast: Use for_each_cpu() specially on UP kernels
Pull scheduler fixlets from Thomas Gleixner:
"Three trivial fixlets for the scheduler:
- move print_rt_rq() and print_dl_rq() declarations to the right
place
- make grub_reclaim() static
- fix the bogus documentation reference in Kconfig"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix documentation file path
sched/deadline: Make the grub_reclaim() function static
sched/debug: Move the print_rt_rq() and print_dl_rq() declarations to kernel/sched/sched.h
I have run into a couple of drivers using current_kernel_time()
suffering from the y2038 problem, and they could be converted
to using ktime_t, but don't have interfaces that skip the nanosecond
calculation at the moment.
This introduces ktime_get_coarse_with_offset() as a simpler
variant of ktime_get_with_offset(), and adds wrappers for the
three time domains we support with the existing function.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: y2038@lists.linaro.org
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20180427134016.2525989-5-arnd@arndb.de
The current_kernel_time64, get_monotonic_coarse64, getrawmonotonic64,
get_monotonic_boottime64 and timekeeping_clocktai64 interfaces have
rather inconsistent naming, and they differ in the calling conventions
by passing the output either by reference or as a return value.
Rename them to ktime_get_coarse_real_ts64, ktime_get_coarse_ts64,
ktime_get_raw_ts64, ktime_get_boottime_ts64 and ktime_get_clocktai_ts64
respectively, and provide the interfaces with macros or inline
functions as needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: y2038@lists.linaro.org
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20180427134016.2525989-4-arnd@arndb.de
In a move to make ktime_get_*() the preferred driver interface into the
timekeeping code, sanitizes ktime_get_real_ts64() to be a proper exported
symbol rather than an alias for getnstimeofday64().
The internal __getnstimeofday64() is no longer used, so remove that
and merge it into ktime_get_real_ts64().
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: y2038@lists.linaro.org
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20180427134016.2525989-3-arnd@arndb.de
At this point, we have converted most of the kernel to use timespec64
consistently in place of timespec, so it seems it's time to make
timespec64 the native structure and define timespec in terms of that
one on 64-bit architectures.
Starting with gcc-5, the compiler can completely optimize away the
timespec_to_timespec64 and timespec64_to_timespec functions on 64-bit
architectures. With older compilers, we introduce a couple of extra
copies of local variables, but those are easily avoided by using
the timespec64 based interfaces consistently, as we do in most of the
important code paths already.
The main upside of removing the hack is that printing the tv_sec
field of a timespec64 structure can now use the %lld format
string on all architectures without a cast to time64_t. Without
this patch, the field is a 'long' type and would have to be printed
using %ld on 64-bit architectures.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: y2038@lists.linaro.org
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20180427134016.2525989-2-arnd@arndb.de
Currently sk_msg programs only have access to the raw data. However,
it is often useful when building policies to have the policies specific
to the socket endpoint. This allows using the socket tuple as input
into filters, etc.
This patch adds ctx access to the sock fields.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Use the existing audit_log_session_info() function rather than
hardcoding its functionality.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
There can be a lot of workqueue workers and they all show up with the
cryptic kworker/* names making it difficult to understand which is
doing what and how they came to be.
# ps -ef | grep kworker
root 4 2 0 Feb25 ? 00:00:00 [kworker/0:0H]
root 6 2 0 Feb25 ? 00:00:00 [kworker/u112:0]
root 19 2 0 Feb25 ? 00:00:00 [kworker/1:0H]
root 25 2 0 Feb25 ? 00:00:00 [kworker/2:0H]
root 31 2 0 Feb25 ? 00:00:00 [kworker/3:0H]
...
This patch makes workqueue workers report the latest workqueue it was
executing for through /proc/PID/{comm,stat,status}. The extra
information is appended to the kthread name with intervening '+' if
currently executing, otherwise '-'.
# cat /proc/25/comm
kworker/2:0-events_power_efficient
# cat /proc/25/stat
25 (kworker/2:0-events_power_efficient) I 2 0 0 0 -1 69238880 0 0...
# grep Name /proc/25/status
Name: kworker/2:0-events_power_efficient
Unfortunately, ps(1) truncates comm to 15 characters,
# ps 25
PID TTY STAT TIME COMMAND
25 ? I 0:00 [kworker/2:0-eve]
making it a lot less useful; however, this should be an easy fix from
ps(1) side.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Craig Small <csmall@enc.com.au>
Work functions can use set_worker_desc() to improve the visibility of
what the worker task is doing. Currently, the desc field is unset at
the beginning of each execution and there is a separate field to track
the field is set during the current execution.
Instead of leaving empty till desc is set, worker->desc can be used to
remember the last workqueue the worker worked on by default and users
that use set_worker_desc() can override it to something more
informative as necessary.
This simplifies desc handling and helps tracking the last workqueue
that the worker exected on to improve visibility.
Signed-off-by: Tejun Heo <tj@kernel.org>
For historical reasons, the worker attach/detach functions don't
currently manage worker->pool and the callers are manually and
inconsistently updating it.
This patch moves worker->pool updates into the worker attach/detach
functions. This makes worker->pool consistent and clearly defines how
worker->pool updates are synchronized.
This will help later workqueue visibility improvements by allowing
safe access to workqueue information from worker->task.
Signed-off-by: Tejun Heo <tj@kernel.org>
To improve workqueue visibility, we want to be able to access
workqueue information from worker tasks. The per-pool attach mutex
makes that difficult because there's no way of stabilizing task ->
worker pool association without knowing the pool first.
Worker attach/detach is a slow path and there's no need for different
pools to be able to perform them concurrently. This patch replaces
the per-pool attach_mutex with global wq_pool_attach_mutex to prepare
for visibility improvement changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
As a prerequisite, complement commit 3d1cb2059d ("workqueue: include
workqueue info when printing debug dump of a worker task") to be usable with
kernel modules by exporting the symbol set_worker_desc(). Current built-in
user was introduced with commit ef3b101925 ("writeback: set worker desc to
identify writeback workers in task dumps").
Can help distinguishing work items which do not have adapter scope.
Description is printed out with task dump for debugging on WARN, BUG, panic,
or magic-sysrq [show-task-states(t)].
Example:
$ echo 0 >| /sys/bus/ccw/drivers/zfcp/0.0.1880/0x50050763031bd327/failed &
$ echo 't' >| /proc/sysrq-trigger
$ dmesg
sysrq: SysRq : Show State
task PC stack pid father
...
zfcp_q_0.0.1880 S14640 2165 2 0x02000000
Call Trace:
([<00000000009df464>] __schedule+0xbf4/0xc78)
[<00000000009df57c>] schedule+0x94/0xc0
[<0000000000168654>] rescuer_thread+0x33c/0x3a0
[<000000000016f8be>] kthread+0x166/0x178
[<00000000009e71f2>] kernel_thread_starter+0x6/0xc
[<00000000009e71ec>] kernel_thread_starter+0x0/0xc
no locks held by zfcp_q_0.0.1880/2165.
...
kworker/u512:2 D11280 2193 2 0x02000000
Workqueue: zfcp_q_0.0.1880 zfcp_scsi_rport_work [zfcp] (zrpd-50050763031bd327)
^^^^^^^^^^^^^^^^^^^^^
Call Trace:
([<00000000009df464>] __schedule+0xbf4/0xc78)
[<00000000009df57c>] schedule+0x94/0xc0
[<00000000009e50c0>] schedule_timeout+0x488/0x4d0
[<00000000001e425c>] msleep+0x5c/0x78 >>test code only<<
[<000003ff8008a21e>] zfcp_scsi_rport_work+0xbe/0x100 [zfcp]
[<0000000000167154>] process_one_work+0x3b4/0x718
[<000000000016771c>] worker_thread+0x264/0x408
[<000000000016f8be>] kthread+0x166/0x178
[<00000000009e71f2>] kernel_thread_starter+0x6/0xc
[<00000000009e71ec>] kernel_thread_starter+0x0/0xc
2 locks held by kworker/u512:2/2193:
#0: (name){++++.+}, at: [<0000000000166f4e>] process_one_work+0x1ae/0x718
#1: ((&(&port->rport_work)->work)){+.+.+.}, at: [<0000000000166f4e>] process_one_work+0x1ae/0x718
...
=============================================
Showing busy workqueues and worker pools:
workqueue zfcp_q_0.0.1880: flags=0x2000a
pwq 512: cpus=0-255 flags=0x4 nice=0 active=1/1
in-flight: 2193:zfcp_scsi_rport_work [zfcp]
pool 512: cpus=0-255 flags=0x4 nice=0 hung=0s workers=4 idle: 5 2354 2311
Work items with adapter scope are already identified by the workqueue name
"zfcp_q_<devbusid>" and the work item function name.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Clean up SPDX-License-Identifier and removing licensing leftovers.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Before changing the arguments of the functions fsnotify_add_mark()
and fsnotify_add_mark_locked(), convert most callers to use a wrapper.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
inode_mark and vfsmount_mark arguments are passed to handle_event()
operation as function arguments as well as on iter_info struct.
The difference is that iter_info struct may contain marks that should
not be handled and are represented as NULL arguments to inode_mark or
vfsmount_mark.
Instead of passing the inode_mark and vfsmount_mark arguments, add
a report_mask member to iter_info struct to indicate which marks should
be handled, versus marks that should only be kept alive during user
wait.
This change is going to be used for passing more mark types
with handle_event() (i.e. super block marks).
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Since the grub_reclaim() function can be made static, make it so.
Silences the following GCC warning (W=1):
kernel/sched/deadline.c:1120:5: warning: no previous prototype for ‘grub_reclaim’ [-Wmissing-prototypes]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180516200902.959-1-malat@debian.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In the following commit:
6b55c9654f ("sched/debug: Move print_cfs_rq() declaration to kernel/sched/sched.h")
the print_cfs_rq() prototype was added to <kernel/sched/sched.h>,
right next to the prototypes for print_cfs_stats(), print_rt_stats()
and print_dl_stats().
Finish this previous commit and also move related prototypes for
print_rt_rq() and print_dl_rq().
Remove existing extern declarations now that they not needed anymore.
Silences the following GCC warning, triggered by W=1:
kernel/sched/debug.c:573:6: warning: no previous prototype for ‘print_rt_rq’ [-Wmissing-prototypes]
kernel/sched/debug.c:603:6: warning: no previous prototype for ‘print_dl_rq’ [-Wmissing-prototypes]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180516195348.30426-1-malat@debian.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Recently during testing, I ran into the following panic:
[ 207.892422] Internal error: Accessing user space memory outside uaccess.h routines: 96000004 [#1] SMP
[ 207.901637] Modules linked in: binfmt_misc [...]
[ 207.966530] CPU: 45 PID: 2256 Comm: test_verifier Tainted: G W 4.17.0-rc3+ #7
[ 207.974956] Hardware name: FOXCONN R2-1221R-A4/C2U4N_MB, BIOS G31FB18A 03/31/2017
[ 207.982428] pstate: 60400005 (nZCv daif +PAN -UAO)
[ 207.987214] pc : bpf_skb_load_helper_8_no_cache+0x34/0xc0
[ 207.992603] lr : 0xffff000000bdb754
[ 207.996080] sp : ffff000013703ca0
[ 207.999384] x29: ffff000013703ca0 x28: 0000000000000001
[ 208.004688] x27: 0000000000000001 x26: 0000000000000000
[ 208.009992] x25: ffff000013703ce0 x24: ffff800fb4afcb00
[ 208.015295] x23: ffff00007d2f5038 x22: ffff00007d2f5000
[ 208.020599] x21: fffffffffeff2a6f x20: 000000000000000a
[ 208.025903] x19: ffff000009578000 x18: 0000000000000a03
[ 208.031206] x17: 0000000000000000 x16: 0000000000000000
[ 208.036510] x15: 0000ffff9de83000 x14: 0000000000000000
[ 208.041813] x13: 0000000000000000 x12: 0000000000000000
[ 208.047116] x11: 0000000000000001 x10: ffff0000089e7f18
[ 208.052419] x9 : fffffffffeff2a6f x8 : 0000000000000000
[ 208.057723] x7 : 000000000000000a x6 : 00280c6160000000
[ 208.063026] x5 : 0000000000000018 x4 : 0000000000007db6
[ 208.068329] x3 : 000000000008647a x2 : 19868179b1484500
[ 208.073632] x1 : 0000000000000000 x0 : ffff000009578c08
[ 208.078938] Process test_verifier (pid: 2256, stack limit = 0x0000000049ca7974)
[ 208.086235] Call trace:
[ 208.088672] bpf_skb_load_helper_8_no_cache+0x34/0xc0
[ 208.093713] 0xffff000000bdb754
[ 208.096845] bpf_test_run+0x78/0xf8
[ 208.100324] bpf_prog_test_run_skb+0x148/0x230
[ 208.104758] sys_bpf+0x314/0x1198
[ 208.108064] el0_svc_naked+0x30/0x34
[ 208.111632] Code: 91302260 f9400001 f9001fa1 d2800001 (29500680)
[ 208.117717] ---[ end trace 263cb8a59b5bf29f ]---
The program itself which caused this had a long jump over the whole
instruction sequence where all of the inner instructions required
heavy expansions into multiple BPF instructions. Additionally, I also
had BPF hardening enabled which requires once more rewrites of all
constant values in order to blind them. Each time we rewrite insns,
bpf_adj_branches() would need to potentially adjust branch targets
which cross the patchlet boundary to accommodate for the additional
delta. Eventually that lead to the case where the target offset could
not fit into insn->off's upper 0x7fff limit anymore where then offset
wraps around becoming negative (in s16 universe), or vice versa
depending on the jump direction.
Therefore it becomes necessary to detect and reject any such occasions
in a generic way for native eBPF and cBPF to eBPF migrations. For
the latter we can simply check bounds in the bpf_convert_filter()'s
BPF_EMIT_JMP helper macro and bail out once we surpass limits. The
bpf_patch_insn_single() for native eBPF (and cBPF to eBPF in case
of subsequent hardening) is a bit more complex in that we need to
detect such truncations before hitting the bpf_prog_realloc(). Thus
the latter is split into an extra pass to probe problematic offsets
on the original program in order to fail early. With that in place
and carefully tested I no longer hit the panic and the rewrites are
rejected properly. The above example panic I've seen on bpf-next,
though the issue itself is generic in that a guard against this issue
in bpf seems more appropriate in this case.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In the sockmap design BPF programs (SK_SKB_STREAM_PARSER,
SK_SKB_STREAM_VERDICT and SK_MSG_VERDICT) are attached to the sockmap
map type and when a sock is added to the map the programs are used by
the socket. However, sockmap updates from both userspace and BPF
programs can happen concurrently with the attach and detach of these
programs.
To resolve this we use the bpf_prog_inc_not_zero and a READ_ONCE()
primitive to ensure the program pointer is not refeched and
possibly NULL'd before the refcnt increment. This happens inside
a RCU critical section so although the pointer reference in the map
object may be NULL (by a concurrent detach operation) the reference
from READ_ONCE will not be free'd until after grace period. This
ensures the object returned by READ_ONCE() is valid through the
RCU criticl section and safe to use as long as we "know" it may
be free'd shortly.
Daniel spotted a case in the sock update API where instead of using
the READ_ONCE() program reference we used the pointer from the
original map, stab->bpf_{verdict|parse|txmsg}. The problem with this
is the logic checks the object returned from the READ_ONCE() is not
NULL and then tries to reference the object again but using the
above map pointer, which may have already been NULL'd by a parallel
detach operation. If this happened bpf_porg_inc_not_zero could
dereference a NULL pointer.
Fix this by using variable returned by READ_ONCE() that is checked
for NULL.
Fixes: 2f857d0460 ("bpf: sockmap, remove STRPARSER map_flags and add multi-map support")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
If the user were to only attach one of the parse or verdict programs
then it is possible a subsequent sockmap update could incorrectly
decrement the refcnt on the program. This happens because in the
rollback logic, after an error, we have to decrement the program
reference count when its been incremented. However, we only increment
the program reference count if the user has both a verdict and a
parse program. The reason for this is because, at least at the
moment, both are required for any one to be meaningful. The problem
fixed here is in the rollback path we decrement the program refcnt
even if only one existing. But we never incremented the refcnt in
the first place creating an imbalance.
This patch fixes the error path to handle this case.
Fixes: 2f857d0460 ("bpf: sockmap, remove STRPARSER map_flags and add multi-map support")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
`e' is being freed twice.
Fix this by removing one of the kfree() calls.
Addresses-Coverity-ID: 1468983 ("Double free")
Fixes: 8111038444 ("bpf: sockmap, add hash map support")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
There is a potential execution path in which variable err is
returned without being properly initialized previously.
Fix this by initializing variable err to 0.
Addresses-Coverity-ID: 1468964 ("Uninitialized scalar variable")
Fixes: e5cd3abcb3 ("bpf: sockmap, refactor sockmap routines to work with hashmap")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Recognizing that the loginuid is an internal audit value, use an access
function to retrieve the audit loginuid value for the task rather than
reaching directly into the task struct to get it.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
On the rebase of the following commit on the new seccomp actions_logged
function, one audit_context access was missed.
commit cdfb6b341f
("audit: use inline function to get audit context")
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-05-17
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Provide a new BPF helper for doing a FIB and neighbor lookup
in the kernel tables from an XDP or tc BPF program. The helper
provides a fast-path for forwarding packets. The API supports
IPv4, IPv6 and MPLS protocols, but currently IPv4 and IPv6 are
implemented in this initial work, from David (Ahern).
2) Just a tiny diff but huge feature enabled for nfp driver by
extending the BPF offload beyond a pure host processing offload.
Offloaded XDP programs are allowed to set the RX queue index and
thus opening the door for defining a fully programmable RSS/n-tuple
filter replacement. Once BPF decided on a queue already, the device
data-path will skip the conventional RSS processing completely,
from Jakub.
3) The original sockmap implementation was array based similar to
devmap. However unlike devmap where an ifindex has a 1:1 mapping
into the map there are use cases with sockets that need to be
referenced using longer keys. Hence, sockhash map is added reusing
as much of the sockmap code as possible, from John.
4) Introduce BTF ID. The ID is allocatd through an IDR similar as
with BPF maps and progs. It also makes BTF accessible to user
space via BPF_BTF_GET_FD_BY_ID and adds exposure of the BTF data
through BPF_OBJ_GET_INFO_BY_FD, from Martin.
5) Enable BPF stackmap with build_id also in NMI context. Due to the
up_read() of current->mm->mmap_sem build_id cannot be parsed.
This work defers the up_read() via a per-cpu irq_work so that
at least limited support can be enabled, from Song.
6) Various BPF JIT follow-up cleanups and fixups after the LD_ABS/LD_IND
JIT conversion as well as implementation of an optimized 32/64 bit
immediate load in the arm64 JIT that allows to reduce the number of
emitted instructions; in case of tested real-world programs they
were shrinking by three percent, from Daniel.
7) Add ifindex parameter to the libbpf loader in order to enable
BPF offload support. Right now only iproute2 can load offloaded
BPF and this will also enable libbpf for direct integration into
other applications, from David (Beckett).
8) Convert the plain text documentation under Documentation/bpf/ into
RST format since this is the appropriate standard the kernel is
moving to for all documentation. Also add an overview README.rst,
from Jesper.
9) Add __printf verification attribute to the bpf_verifier_vlog()
helper. Though it uses va_list we can still allow gcc to check
the format string, from Mathieu.
10) Fix a bash reference in the BPF selftest's Makefile. The '|& ...'
is a bash 4.0+ feature which is not guaranteed to be available
when calling out to shell, therefore use a more portable variant,
from Joe.
11) Fix a 64 bit division in xdp_umem_reg() by using div_u64()
instead of relying on the gcc built-in, from Björn.
12) Fix a sock hashmap kmalloc warning reported by syzbot when an
overly large key size is used in hashmap then causing overflows
in htab->elem_size. Reject bogus attr->key_size early in the
sock_hash_alloc(), from Yonghong.
13) Ensure in BPF selftests when urandom_read is being linked that
--build-id is always enabled so that test_stacktrace_build_id[_nmi]
won't be failing, from Alexei.
14) Add bitsperlong.h as well as errno.h uapi headers into the tools
header infrastructure which point to one of the arch specific
uapi headers. This was needed in order to fix a build error on
some systems for the BPF selftests, from Sirio.
15) Allow for short options to be used in the xdp_monitor BPF sample
code. And also a bpf.h tools uapi header sync in order to fix a
selftest build failure. Both from Prashant.
16) More formally clarify the meaning of ID in the direct packet access
section of the BPF documentation, from Wang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When an error happens in the update sockmap element logic also pass
the err up to the user.
Fixes: e5cd3abcb3 ("bpf: sockmap, refactor sockmap routines to work with hashmap")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
syzbot reported a kernel warning below:
WARNING: CPU: 0 PID: 4499 at mm/slab_common.c:996 kmalloc_slab+0x56/0x70 mm/slab_common.c:996
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 4499 Comm: syz-executor050 Not tainted 4.17.0-rc3+ #9
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1b9/0x294 lib/dump_stack.c:113
panic+0x22f/0x4de kernel/panic.c:184
__warn.cold.8+0x163/0x1b3 kernel/panic.c:536
report_bug+0x252/0x2d0 lib/bug.c:186
fixup_bug arch/x86/kernel/traps.c:178 [inline]
do_error_trap+0x1de/0x490 arch/x86/kernel/traps.c:296
do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315
invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:992
RIP: 0010:kmalloc_slab+0x56/0x70 mm/slab_common.c:996
RSP: 0018:ffff8801d907fc58 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8801aeecb280 RCX: ffffffff8185ebd7
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000ffffffe1
RBP: ffff8801d907fc58 R08: ffff8801adb5e1c0 R09: ffffed0035a84700
R10: ffffed0035a84700 R11: ffff8801ad423803 R12: ffff8801aeecb280
R13: 00000000fffffff4 R14: ffff8801ad891a00 R15: 00000000014200c0
__do_kmalloc mm/slab.c:3713 [inline]
__kmalloc+0x25/0x760 mm/slab.c:3727
kmalloc include/linux/slab.h:517 [inline]
map_get_next_key+0x24a/0x640 kernel/bpf/syscall.c:858
__do_sys_bpf kernel/bpf/syscall.c:2131 [inline]
__se_sys_bpf kernel/bpf/syscall.c:2096 [inline]
__x64_sys_bpf+0x354/0x4f0 kernel/bpf/syscall.c:2096
do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The test case is against sock hashmap with a key size 0xffffffe1.
Such a large key size will cause the below code in function
sock_hash_alloc() overflowing and produces a smaller elem_size,
hence map creation will be successful.
htab->elem_size = sizeof(struct htab_elem) +
round_up(htab->map.key_size, 8);
Later, when map_get_next_key is called and kernel tries
to allocate the key unsuccessfully, it will issue
the above warning.
Similar to hashtab, ensure the key size is at most
MAX_BPF_STACK for a successful map creation.
Fixes: 8111038444 ("bpf: sockmap, add hash map support")
Reported-by: syzbot+e4566d29080e7f3460ff@syzkaller.appspotmail.com
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The inline keyword was not at the beginning of the function declarations.
Fix the following warnings triggered when using W=1:
kernel/time/clocksource.c:456:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
kernel/time/clocksource.c:457:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20180516195943.31924-1-malat@debian.org
I noticed that there is a possibility that printk_safe_log_store() causes
kernel oops because "args" parameter is passed to vsnprintf() again when
atomic_cmpxchg() detected that we raced. Fix this by using va_copy().
Link: http://lkml.kernel.org/r/201805112002.GIF21216.OFVHFOMLJtQFSO@I-love.SAKURA.ne.jp
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: dvyukov@google.com
Cc: syzkaller@googlegroups.com
Cc: fengguang.wu@intel.com
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 42a0bb3f71 ("printk/nmi: generic solution for safe printk in NMI")
Cc: 4.7+ <stable@vger.kernel.org> # v4.7+
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
The filesystem freezing code needs to transfer ownership of a rwsem
embedded in a percpu-rwsem from the task that does the freezing to
another one that does the thawing by calling percpu_rwsem_release()
after freezing and percpu_rwsem_acquire() before thawing.
However, the new rwsem debug code runs afoul with this scheme by warning
that the task that releases the rwsem isn't the one that acquires it,
as reported by Amir Goldstein:
DEBUG_LOCKS_WARN_ON(sem->owner != get_current())
WARNING: CPU: 1 PID: 1401 at /home/amir/build/src/linux/kernel/locking/rwsem.c:133 up_write+0x59/0x79
Call Trace:
percpu_up_write+0x1f/0x28
thaw_super_locked+0xdf/0x120
do_vfs_ioctl+0x270/0x5f1
ksys_ioctl+0x52/0x71
__x64_sys_ioctl+0x16/0x19
do_syscall_64+0x5d/0x167
entry_SYSCALL_64_after_hwframe+0x49/0xbe
To work properly with the rwsem debug code, we need to annotate that the
rwsem ownership is unknown during the tranfer period until a brave soul
comes forward to acquire the ownership. During that period, optimistic
spinning will be disabled.
Reported-by: Amir Goldstein <amir73il@gmail.com>
Tested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jan Kara <jack@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Theodore Y. Ts'o <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-fsdevel@vger.kernel.org
Link: http://lkml.kernel.org/r/1526420991-21213-3-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are use cases where a rwsem can be acquired by one task, but
released by another task. In thess cases, optimistic spinning may need
to be disabled. One example will be the filesystem freeze/thaw code
where the task that freezes the filesystem will acquire a write lock
on a rwsem and then un-owns it before returning to userspace. Later on,
another task will come along, acquire the ownership, thaw the filesystem
and release the rwsem.
Bit 0 of the owner field was used to designate that it is a reader
owned rwsem. It is now repurposed to mean that the owner of the rwsem
is not known. If only bit 0 is set, the rwsem is reader owned. If bit
0 and other bits are set, it is writer owned with an unknown owner.
One such value for the latter case is (-1L). So we can set owner to 1 for
reader-owned, -1 for writer-owned. The owner is unknown in both cases.
To handle transfer of rwsem ownership, the higher level code should
set the owner field to -1 to indicate a write-locked rwsem with unknown
owner. Optimistic spinning will be disabled in this case.
Once the higher level code figures who the new owner is, it can then
set the owner field accordingly.
Tested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jan Kara <jack@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Theodore Y. Ts'o <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-fsdevel@vger.kernel.org
Link: http://lkml.kernel.org/r/1526420991-21213-2-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Updates to the handling of expedited grace periods, perhaps most
notably parallelizing their initialization. Other changes
include fixes from Boqun Feng.
- Miscellaneous fixes. These include an nvme fix from Nitzan Carmi
that I am carrying because it depends on a new SRCU function
cleanup_srcu_struct_quiesced(). This branch also includes fixes
from Byungchul Park and Yury Norov.
- Updates to reduce lock contention in the rcu_node combining tree.
These are in preparation for the consolidation of RCU-bh,
RCU-preempt, and RCU-sched into a single flavor, which was
requested by Linus Torvalds in response to a security flaw
whose root cause included confusion between the multiple flavors
of RCU.
- Torture-test updates that save their users some time and effort.
Conflicts:
drivers/nvme/host/core.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, kernel/memremap.c contains generic code for supporting
memremap() (CONFIG_HAS_IOMEM) and devm_memremap_pages()
(CONFIG_ZONE_DEVICE). This causes ongoing build maintenance problems as
additions to memremap.c, especially for the ZONE_DEVICE case, need to be
careful about being placed in ifdef guards. Remove the need for these
ifdef guards by moving the ZONE_DEVICE support functions to their own
compilation unit.
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Variants of proc_create{,_data} that directly take a seq_file show
callback and drastically reduces the boilerplate code in the callers.
All trivial callers converted over.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Variant of proc_create_data that directly take a struct seq_operations
argument + a private state size and drastically reduces the boilerplate
code in the callers.
All trivial callers converted over.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Variants of proc_create{,_data} that directly take a struct seq_operations
argument and drastically reduces the boilerplate code in the callers.
All trivial callers converted over.
Signed-off-by: Christoph Hellwig <hch@lst.de>
for_each_cpu() unintuitively reports CPU0 as set independent of the actual
cpumask content on UP kernels. This causes an unexpected PIT interrupt
storm on a UP kernel running in an SMP virtual machine on Hyper-V, and as
a result, the virtual machine can suffer from a strange random delay of 1~20
minutes during boot-up, and sometimes it can hang forever.
Protect if by checking whether the cpumask is empty before entering the
for_each_cpu() loop.
[ tglx: Use !IS_ENABLED(CONFIG_SMP) instead of #ifdeffery ]
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poulson <jopoulso@microsoft.com>
Cc: "Michael Kelley (EOSG)" <Michael.H.Kelley@microsoft.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: stable@vger.kernel.org
Cc: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Jork Loeser <Jork.Loeser@microsoft.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: KY Srinivasan <kys@microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Link: https://lkml.kernel.org/r/KL1P15301MB000678289FE55BA365B3279ABF990@KL1P15301MB0006.APCP153.PROD.OUTLOOK.COM
Link: https://lkml.kernel.org/r/KL1P15301MB0006FA63BC22BEB64902EAA0BF930@KL1P15301MB0006.APCP153.PROD.OUTLOOK.COM
Sockmap is currently backed by an array and enforces keys to be
four bytes. This works well for many use cases and was originally
modeled after devmap which also uses four bytes keys. However,
this has become limiting in larger use cases where a hash would
be more appropriate. For example users may want to use the 5-tuple
of the socket as the lookup key.
To support this add hash support.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This commit adds end-of-test state printout to help check whether RCU
shut down nicely. Note that this printout only helps for flavors of
RCU that are not used much by the kernel. In particular, for normal
RCU having a grace period in progress is expected behavior.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
Now that grace-period requests use funnel locking and now that they
set ->gp_flags to RCU_GP_FLAG_INIT even when the RCU grace-period
kthread has not yet started, rcu_gp_kthread() no longer needs to check
need_any_future_gp() at startup time. This commit therefore removes
this check.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
Now that RCU no longer relies on failsafe checks, cpu_needs_another_gp()
can be greatly simplified. This simplification eliminates the last
call to rcu_future_needs_gp() and to rcu_segcblist_future_gp_needed(),
both of which which can then be eliminated. And then, because
cpu_needs_another_gp() is called only from __rcu_pending(), it can be
inlined and eliminated.
This commit carries out the simplification, inlining, and elimination
called out above.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
All of the cpu_needs_another_gp() function's checks (except for
newly arrived callbacks) have been subsumed into the rcu_gp_cleanup()
function's scan of the rcu_node tree. This commit therefore drops the
call to cpu_needs_another_gp(). The check for newly arrived callbacks
is supplied by rcu_accelerate_cbs(). Any needed advancing (as in the
earlier rcu_advance_cbs() call) will be supplied when the corresponding
CPU becomes aware of the end of the now-completed grace period.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
If rcu_start_this_gp() is invoked with a requested grace period more
than three in the future, then either the ->need_future_gp[] array
needs to be bigger or the caller needs to be repaired. This commit
therefore adds a WARN_ON_ONCE() checking for this condition.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
The rcu_start_this_gp() function had a simple form of funnel locking that
used only the leaves and root of the rcu_node tree, which is fine for
systems with only a few hundred CPUs, but sub-optimal for systems having
thousands of CPUs. This commit therefore adds full-tree funnel locking.
This variant of funnel locking is unusual in the following ways:
1. The leaf-level rcu_node structure's ->lock is held throughout.
Other funnel-locking implementations drop the leaf-level lock
before progressing to the next level of the tree.
2. Funnel locking can be started at the root, which is convenient
for code that already holds the root rcu_node structure's ->lock.
Other funnel-locking implementations start at the leaves.
3. If an rcu_node structure other than the initial one believes
that a grace period is in progress, it is not necessary to
go further up the tree. This is because grace-period cleanup
scans the full tree, so that marking the need for a subsequent
grace period anywhere in the tree suffices -- but only if
a grace period is currently in progress.
4. It is possible that the RCU grace-period kthread has not yet
started, and this case must be handled appropriately.
However, the general approach of using a tree to control lock contention
is still in place.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
The rcu_accelerate_cbs() function selects a grace-period target, which
it uses to have rcu_segcblist_accelerate() assign numbers to recently
queued callbacks. Then it invokes rcu_start_future_gp(), which selects
a grace-period target again, which is a bit pointless. This commit
therefore changes rcu_start_future_gp() to take the grace-period target as
a parameter, thus avoiding double selection. This commit also changes
the name of rcu_start_future_gp() to rcu_start_this_gp() to reflect
this change in functionality, and also makes a similar change to the
name of trace_rcu_future_gp().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
The rcu_start_gp_advanced() is invoked only from rcu_start_future_gp() and
much of its code is redundant when invoked from that context. This commit
therefore inlines rcu_start_gp_advanced() into rcu_start_future_gp(),
then removes rcu_start_gp_advanced().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
Once the grace period has ended, any RCU_GP_FLAG_FQS requests are
irrelevant: The grace period has ended, so there is no longer any
point in forcing quiescent states in order to try to make it end sooner.
This commit therefore causes rcu_gp_cleanup() to clear any bits other
than RCU_GP_FLAG_INIT from ->gp_flags at the end of the grace period.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
It is true that currently only the low-order two bits are used, so
there should be no problem given modern machines and compilers, but
good hygiene and maintainability dictates use of an unsigned long
instead of an int. This commit therefore makes this change.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
The __rcu_process_callbacks() function currently checks to see if
the current CPU needs a grace period and also if there is any other
reason to kick off a new grace period. This is one of the fail-safe
checks that has been rendered unnecessary by the changes that increase
the accuracy of rcu_gp_cleanup()'s estimate as to whether another grace
period is required. Because this particular fail-safe involved acquiring
the root rcu_node structure's ->lock, which has seen excessive contention
in real life, this fail-safe needs to go.
However, one check must remain, namely the check for newly arrived
RCU callbacks that have not yet been associated with a grace period.
One might hope that the checks in __note_gp_changes(), which is invoked
indirectly from rcu_check_quiescent_state(), would suffice, but this
function won't be invoked at all if RCU is idle. It is therefore necessary
to replace the fail-safe checks with a simpler check for newly arrived
callbacks during an RCU idle period, which is exactly what this commit
does. This change removes the final call to rcu_start_gp(), so this
function is removed as well.
Note that lockless use of cpu_needs_another_gp() is racy, but that
these races are harmless in this case. If RCU really is idle, the
values will not change, so the return value from cpu_needs_another_gp()
will be correct. If RCU is not idle, the resulting redundant call to
rcu_accelerate_cbs() will be harmless, and might even have the benefit
of reducing grace-period latency a bit.
This commit also moves interrupt disabling into the "if" statement to
improve real-time response a bit.
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
When __call_rcu_core() notices excessive numbers of callbacks pending
on the current CPU, we know that at least one of them is not yet
classified, namely the one that was just now queued. Therefore, it
is not necessary to invoke rcu_start_gp() and thus not necessary to
acquire the root rcu_node structure's ->lock. This commit therefore
replaces the rcu_start_gp() with rcu_accelerate_cbs(), thus replacing
an acquisition of the root rcu_node structure's ->lock with that of
this CPU's leaf rcu_node structure.
This decreases contention on the root rcu_node structure's ->lock.
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
The rcu_migrate_callbacks() function invokes rcu_advance_cbs()
twice, ignoring the return value. This is OK at pressent because of
failsafe code that does the wakeup when needed. However, this failsafe
code acquires the root rcu_node structure's lock frequently, while
rcu_migrate_callbacks() does so only once per CPU-offline operation.
This commit therefore makes rcu_migrate_callbacks()
wake up the RCU GP kthread when either call to rcu_advance_cbs()
returns true, thus removing need for the failsafe code.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
There is no longer any need for ->need_future_gp[] to count the number of
requests for future grace periods, so this commit converts the additions
to assignments to "true" and reduces the size of each element to one byte.
While we are in the area, fix an obsolete comment.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
Currently, the rcu_future_needs_gp() function checks only the current
element of the ->need_future_gps[] array, which might miss elements that
were offset from the expected element, for example, due to races with
the start or the end of a grace period. This commit therefore makes
rcu_future_needs_gp() use the need_any_future_gp() macro to check all
of the elements of this array.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
The rcu_cbs_completed() function provides the value of ->completed
at which new callbacks can safely be invoked. This is recorded in
two-element ->need_future_gp[] arrays in the rcu_node structure, and
the elements of these arrays corresponding to the just-completed grace
period are zeroed at the end of that grace period. However, the
rcu_cbs_completed() function can return the current ->completed value
plus either one or two, so it is possible for the corresponding
->need_future_gp[] entry to be cleared just after it was set, thus
losing a request for a future grace period.
This commit avoids this race by expanding ->need_future_gp[] to four
elements.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
Currently, rcu_gp_cleanup() scans the rcu_node tree in order to reset
state to reflect the end of the grace period. It also checks to see
whether a new grace period is needed, but in a number of cases, rather
than directly cause the new grace period to be immediately started, it
instead leaves the grace-period-needed state where various fail-safes
can find it. This works fine, but results in higher contention on the
root rcu_node structure's ->lock, which is undesirable, and contention
on that lock has recently become noticeable.
This commit therefore makes rcu_gp_cleanup() immediately start a new
grace period if there is any need for one.
It is quite possible that it will later be necessary to throttle the
grace-period rate, but that can be dealt with when and if.
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
The rcu_gp_kthread() function immediately sleeps waiting to be notified
of the need for a new grace period, which currently works because there
are a number of code sequences that will provide the needed wakeup later.
However, some of these code sequences need to acquire the root rcu_node
structure's ->lock, and contention on that lock has started manifesting.
This commit therefore makes rcu_gp_kthread() check for early-boot activity
when it starts up, omitting the initial sleep in that case.
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
Accessors for the ->need_future_gp[] array are currently open-coded,
which makes them difficult to change. To improve maintainability, this
commit adds need_future_gp_mask() to compute the indexing mask from the
array size, need_future_gp_element() to access the element corresponding
to the specified grace-period number, and need_any_future_gp() to
determine if any future grace period is needed. This commit also applies
need_future_gp_element() to existing open-coded single-element accesses.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
The rcu_start_future_gp() function uses a sloppy check for a grace
period being in progress, which works today because there are a number
of code sequences that resolve the resulting races. However, some of
these race-resolution code sequences must acquire the root rcu_node
structure's ->lock, and contention on that lock has started manifesting.
This commit therefore makes rcu_start_future_gp() check more precise,
eliminating the sloppy lockless check of the rcu_state structure's ->gpnum
and ->completed fields. The effect is that rcu_start_future_gp() will
sometimes unnecessarily attempt to start a new grace period, but this
overhead will be reduced later using funnel locking.
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
When rcu_cbs_completed() is invoked on a non-root rcu_node structure,
it unconditionally assumes that two grace periods must complete before
the callbacks at hand can be invoked. This is overly conservative because
if that non-root rcu_node structure believes that no grace period is in
progress, and if the corresponding rcu_state structure's ->gpnum field
has not yet been incremented, then these callbacks may safely be invoked
after only one grace period has completed.
This change is required to permit grace-period start requests to use
funnel locking, which is in turn permitted to reduce root rcu_node ->lock
contention, which has been observed by Nick Piggin. Furthermore, such
contention will likely be increased by the merging of RCU-bh, RCU-preempt,
and RCU-sched, so it makes sense to take steps to decrease it.
This commit therefore improves the accuracy of rcu_cbs_completed() when
invoked on a non-root rcu_node structure as described above.
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
This commit adds rcu_first_leaf_node() that returns a pointer to
the first leaf rcu_node structure in the specified RCU flavor and an
rcu_is_leaf_node() that returns true iff the specified rcu_node structure
is a leaf. This commit also uses these macros where appropriate.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
The current cleanup_srcu_struct() flushes work, which prevents it
from being invoked from some workqueue contexts, as well as from
atomic (non-blocking) contexts. This patch therefore introduced a
cleanup_srcu_struct_quiesced(), which can be invoked only after all
activity on the specified srcu_struct has completed. This restriction
allows cleanup_srcu_struct_quiesced() to be invoked from workqueue
contexts as well as from atomic contexts.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nitzan Carmi <nitzanc@mellanox.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
Because rcu_eqs_special_set() is declared only in internal header
kernel/rcu/tree.h and stubbed in include/linux/rcutiny.h, it is
inaccessible outside of the RCU implementation. This patch therefore
moves the rcu_eqs_special_set() declaration to include/linux/rcutree.h,
which allows it to be used in non-rcu kernel code.
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
The header comment for rcu_bind_gp_kthread() refers to sysidle, which
is no longer with us. However, it is still important to bind RCU's
grace-period kthreads to the housekeeping CPU(s), so rather than remove
rcu_bind_gp_kthread(), this commit updates the comment.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
The __rcu_read_lock() and __rcu_read_unlock() functions were moved
to kernel/rcu/update.c in order to implement tiny preemptible RCU.
However, tiny preemptible RCU was removed from the kernel a long time
ago, so this commit belatedly moves them back into the only remaining
preemptible-RCU code.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
The cond_resched_softirq() macro is not used anywhere in mainline, so
this commit simplifies the kernel by eliminating it.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
Commit e31d28b6ab ("trace: Eliminate cond_resched_rcu_qs() in favor
of cond_resched()") substituted cond_resched() for the earlier call
to cond_resched_rcu_qs(). However, the new-age cond_resched() does
not do anything to help RCU-tasks grace periods because (1) RCU-tasks
is only enabled when CONFIG_PREEMPT=y and (2) cond_resched() is a
complete no-op when preemption is enabled. This situation results
in hangs when running the trace benchmarks.
A number of potential fixes were discussed on LKML
(https://lkml.kernel.org/r/20180224151240.0d63a059@vmware.local.home),
including making cond_resched() not be a no-op; making cond_resched()
not be a no-op, but only when running tracing benchmarks; reverting
the aforementioned commit (which works because cond_resched_rcu_qs()
does provide an RCU-tasks quiescent state; and adding a call to the
scheduler/RCU rcu_note_voluntary_context_switch() function. All were
deemed unsatisfactory, either due to added cond_resched() overhead or
due to magic functions inviting cargo culting.
This commit renames cond_resched_rcu_qs() to cond_resched_tasks_rcu_qs(),
which provides a clear hint as to what this function is doing and
why and where it should be used, and then replaces the call to
cond_resched() with cond_resched_tasks_rcu_qs() in the trace benchmark's
benchmark_event_kthread() function.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
Commit ae91aa0adb ("rcu: Remove debugfs tracing") removed the
RCU debugfs tracing code, but did not remove the no-longer used
->exp_workdone{0,1,2,3} fields in the srcu_data structure. This commit
therefore removes these fields along with the code that uselessly
updates them.
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
If an excessive number of callbacks have been queued, but the NOCB
leader kthread's wakeup must be deferred, then we should wake up the
leader unconditionally once it is safe to do so.
This was handled correctly in commit fbce7497ee ("rcu: Parallelize and
economize NOCB kthread wakeups"), but then commit 8be6e1b15c ("rcu:
Use timer as backstop for NOCB deferred wakeups") passed RCU_NOCB_WAKE
instead of the correct RCU_NOCB_WAKE_FORCE to wake_nocb_leader_defer().
As an interesting aside, RCU_NOCB_WAKE_FORCE is never passed to anything,
which should have been taken as a hint. ;-)
This commit therefore passes RCU_NOCB_WAKE_FORCE instead of RCU_NOCB_WAKE
to wake_nocb_leader_defer() when a callback is queued onto a NOCB CPU
that already has an excessive number of callbacks pending.
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
Commit 44c65ff2e3 ("rcu: Eliminate NOCBs CPU-state Kconfig options")
made allocation of rcu_nocb_mask depend only on the rcu_nocbs=,
nohz_full=, or isolcpus= kernel boot parameters. However, it failed
to change the initial value of rcu_init_nohz()'s local variable
need_rcu_nocb_mask to false, which can result in useless allocation
of an all-zero rcu_nocb_mask. This commit therefore fixes this bug by
changing the initial value of need_rcu_nocb_mask to false.
While we are in the area, also correct the error message that is printed
when someone specifies that can-never-exist CPUs should be NOCBs CPUs.
Reported-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Byungchul Park <byungchul.park@lge.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
The rcu_preempt_do_callbacks() function was introduced in commit
09223371dea(rcu: Use softirq to address performance regression), where it
was necessary to handle kernel builds both containing and not containing
RCU-preempt. Since then, various changes (most notably f8b7fc6b51
("rcu: use softirq instead of kthreads except when RCU_BOOST=y")) have
resulted in this function being invoked only from rcu_kthread_do_work(),
which is present only in kernels containing RCU-preempt, which in turn
means that the rcu_preempt_do_callbacks() function is no longer needed.
This commit therefore inlines rcu_preempt_do_callbacks() into its
sole remaining caller and also removes the rcu_state_p and rcu_data_p
indirection for added clarity.
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
[ paulmck: Remove the rcu_state_p and rcu_data_p indirection. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
Currently some callsites of sync_rcu_preempt_exp_done() are not called
with the corresponding rcu_node's ->lock held, which could introduces
bugs as per Paul:
o CPU 0 in sync_rcu_preempt_exp_done() reads ->exp_tasks and
sees that it is NULL.
o CPU 1 blocks within an RCU read-side critical section, so
it enqueues the task and points ->exp_tasks at it and
clears CPU 1's bit in ->expmask.
o All other CPUs clear their bits in ->expmask.
o CPU 0 reads ->expmask, sees that it is zero, so incorrectly
concludes that all quiescent states have completed, despite
the fact that ->exp_tasks is non-NULL.
To fix this, sync_rcu_preempt_exp_unlocked() is introduced to replace
lockless callsites of sync_rcu_preempt_exp_done().
Further, a lockdep annotation is added into sync_rcu_preempt_exp_done()
to prevent mis-use in the future.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
Since commit d9a3da0699 ("rcu: Add expedited grace-period support
for preemptible RCU"), there are comments for some funtions in
rcu_report_exp_rnp()'s call-chain saying that exp_mutex or its
predecessors needs to be held.
However, exp_mutex and its predecessors were used only to synchronize
between GPs, and it is clear that all variables visited by those functions
are under the protection of rcu_node's ->lock. Moreover, those functions
are currently called without held exp_mutex, and seems that doesn't
introduce any trouble.
So this patch fixes this problem by updating the comments to match the
current code.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Fixes: d9a3da0699 ("rcu: Add expedited grace-period support for preemptible RCU")
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
The latency of RCU expedited grace periods grows with increasing numbers
of CPUs, eventually failing to be all that expedited. Much of the growth
in latency is in the initialization phase, so this commit uses workqueues
to carry out this initialization concurrently on a rcu_node-by-rcu_node
basis.
This change makes use of a new rcu_par_gp_wq because flushing a work
item from another work item running from the same workqueue can result
in deadlock.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
This patch only refactors the existing sockmap code. This will allow
much of the psock initialization code path and bpf helper codes to
work for both sockmap bpf map types that are backed by an array, the
currently supported type, and the new hash backed bpf map type
sockhash.
Most the fallout comes from three changes,
- Pushing bpf programs into an independent structure so we
can use it from the htab struct in the next patch.
- Generalizing helpers to use void *key instead of the hardcoded
u32.
- Instead of passing map/key through the metadata we now do
the lookup inline. This avoids storing the key in the metadata
which will be useful when keys can be longer than 4 bytes. We
rename the sk pointers to sk_redir at this point as well to
avoid any confusion between the current sk pointer and the
redirect pointer sk_redir.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The schedutil driver sets sg_policy->next_freq to UINT_MAX on certain
occasions to discard the cached value of next freq:
- In sugov_start(), when the schedutil governor is started for a group
of CPUs.
- And whenever we need to force a freq update before rate-limit
duration, which happens when:
- there is an update in cpufreq policy limits.
- Or when the utilization of DL scheduling class increases.
In return, get_next_freq() doesn't return a cached next_freq value but
recalculates the next frequency instead.
But having special meaning for a particular value of frequency makes the
code less readable and error prone. We recently fixed a bug where the
UINT_MAX value was considered as valid frequency in
sugov_update_single().
All we need is a flag which can be used to discard the value of
sg_policy->next_freq and we already have need_freq_update for that. Lets
reuse it instead of setting next_freq to UINT_MAX.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This reverts commit e2cabe48c2.
Lifting the restriction that the sugov kthread is bound to the
policy->related_cpus for a system with a slow switching cpufreq driver,
which is able to perform DVFS from any cpu (e.g. cpufreq-dt), is not
only not beneficial it also harms Enery-Aware Scheduling (EAS) on
systems with asymmetric cpu capacities (e.g. Arm big.LITTLE).
The sugov kthread which does the update for the little cpus could
potentially run on a big cpu. It could prevent that the big cluster goes
into deeper idle states although all the tasks are running on the little
cluster.
Example: hikey960 w/ 4.16.0-rc6-+
Arm big.LITTLE with per-cluster DVFS
root@h960:~# cat /proc/cpuinfo | grep "^CPU part"
CPU part : 0xd03 (Cortex-A53, little cpu)
CPU part : 0xd03
CPU part : 0xd03
CPU part : 0xd03
CPU part : 0xd09 (Cortex-A73, big cpu)
CPU part : 0xd09
CPU part : 0xd09
CPU part : 0xd09
root@h960:/sys/devices/system/cpu/cpufreq# ls
policy0 policy4 schedutil
root@h960:/sys/devices/system/cpu/cpufreq# cat policy*/related_cpus
0 1 2 3
4 5 6 7
(1) w/o the revert:
root@h960:~# ps -eo pid,class,rtprio,pri,psr,comm | awk 'NR == 1 ||
/sugov/'
PID CLS RTPRIO PRI PSR COMMAND
1489 #6 0 140 1 sugov:0
1490 #6 0 140 0 sugov:4
The sugov kthread sugov:4 responsible for policy4 runs on cpu0. (In this
case both sugov kthreads run on little cpus).
cross policy (cluster) remote callback example:
...
migration/1-14 [001] enqueue_task_fair: this_cpu=1 cpu_of(rq)=5
migration/1-14 [001] sugov_update_shared: this_cpu=1 sg_cpu->cpu=5
sg_cpu->sg_policy->policy->related_cpus=4-7
sugov:4-1490 [000] sugov_work: this_cpu=0
sg_cpu->sg_policy->policy->related_cpus=4-7
...
The remote callback (this_cpu=1, target_cpu=5) is executed on cpu=0.
(2) w/ the revert:
root@h960:~# ps -eo pid,class,rtprio,pri,psr,comm | awk 'NR == 1 ||
/sugov/'
PID CLS RTPRIO PRI PSR COMMAND
1491 #6 0 140 2 sugov:0
1492 #6 0 140 4 sugov:4
The sugov kthread sugov:4 responsible for policy4 runs on cpu4.
cross policy (cluster) remote callback example:
...
migration/1-14 [001] enqueue_task_fair: this_cpu=1 cpu_of(rq)=7
migration/1-14 [001] sugov_update_shared: this_cpu=1 sg_cpu->cpu=7
sg_cpu->sg_policy->policy->related_cpus=4-7
sugov:4-1492 [004] sugov_work: this_cpu=4
sg_cpu->sg_policy->policy->related_cpus=4-7
...
The remote callback (this_cpu=1, target_cpu=7) is executed on cpu=4.
Now the sugov kthread executes again on the policy (cluster) for which
the Operating Performance Point (OPP) should be changed.
It avoids the problem that an otherwise idle policy (cluster) is running
schedutil (the sugov kthread) for another one.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Recognizing that the audit context is an internal audit value, use an
access function to set the audit context pointer for the task
rather than reaching directly into the task struct to set it.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: merge fuzz in audit.h]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Currently, we cannot parse build_id in nmi context because of
up_read(¤t->mm->mmap_sem), this makes stackmap with build_id
less useful. This patch enables parsing build_id in nmi by putting
the up_read() call in irq_work. To avoid memory allocation in nmi
context, we use per cpu variable for the irq_work. As a result, only
one irq_work per cpu is allowed. If the irq_work is in-use, we
fallback to only report ips.
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Recognizing that the audit context is an internal audit value, use an
access function to retrieve the audit context pointer for the task
rather than reaching directly into the task struct to get it.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: merge fuzz in auditsc.c and selinuxfs.c, checkpatch.pl fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Use a macro, "AUDIT_SID_UNSET", to replace each instance of
initialization and comparison to an audit session ID.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Same numerical value (for now at least), but a much better documentation
of intent.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In order to optimize and consolidate softirq mask accesses, let's
convert the default irq_cpustat_t implementation to per-CPU standard API.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/1525786706-22846-5-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Calling lockdep_print_held_locks() on a running thread is considered unsafe.
Since all callers should follow that rule and the sanity check is not heavy,
this patch moves the sanity check to inside lockdep_print_held_locks().
As a side effect of this patch, the number of locks held by running threads
will be printed as well. This change will be preferable when we want to
know which threads might be relevant to a problem but are unable to print
any clues because that thread is running.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1523011279-8206-2-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Ingo Molnar <mingo@kernel.org>
debug_show_all_locks() tries to grab the tasklist_lock for two seconds, but
calling while_each_thread() without tasklist_lock held is not safe.
See the following commit for more information:
4449a51a7c ("vm_is_stack: use for_each_thread() rather then buggy while_each_thread()")
Change debug_show_all_locks() from "do_each_thread()/while_each_thread()
with possibility of missing tasklist_lock" to "for_each_process_thread()
with RCU", and add a call to touch_all_softlockup_watchdogs() like
show_state_filter() does.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1523011279-8206-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In the following commit:
247f2f6f3c ("sched/core: Don't schedule threads on pre-empted vCPUs")
... we distinguish between idle_cpu() when the vCPU is not running for
scheduling threads.
However, the idle_cpu() function is used in other places for
actually checking whether the state of the CPU is idle or not.
Hence split the use of that function based on the desired return value,
by introducing the available_idle_cpu() function.
This fixes a (slight) regression in that initial vCPU commit, because
some code paths (like the load-balancer) don't care and shouldn't care
if the vCPU is preempted or not, they just want to know if there's any
tasks on the CPU.
Signed-off-by: Rohit Jain <rohit.k.jain@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dhaval.giani@oracle.com
Cc: linux-kernel@vger.kernel.org
Cc: matt@codeblueprint.co.uk
Cc: steven.sistare@oracle.com
Cc: subhra.mazumdar@oracle.com
Link: http://lkml.kernel.org/r/1525883988-10356-1-git-send-email-rohit.k.jain@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Threads share an address space and each can change the protections of the
same address space to trap NUMA faults. This is redundant and potentially
counter-productive as any thread doing the update will suffice. Potentially
only one thread is required but that thread may be idle or it may not have
any locality concerns and pick an unsuitable scan rate.
This patch uses independent scan period but they are staggered based on
the number of address space users when the thread is created. The intent
is that threads will avoid scanning at the same time and have a chance
to adapt their scan rate later if necessary. This reduces the total scan
activity early in the lifetime of the threads.
The different in headline performance across a range of machines and
workloads is marginal but the system CPU usage is reduced as well as overall
scan activity. The following is the time reported by NAS Parallel Benchmark
using unbound openmp threads and a D size class:
4.17.0-rc1 4.17.0-rc1
vanilla stagger-v1r1
Time bt.D 442.77 ( 0.00%) 419.70 ( 5.21%)
Time cg.D 171.90 ( 0.00%) 180.85 ( -5.21%)
Time ep.D 33.10 ( 0.00%) 32.90 ( 0.60%)
Time is.D 9.59 ( 0.00%) 9.42 ( 1.77%)
Time lu.D 306.75 ( 0.00%) 304.65 ( 0.68%)
Time mg.D 54.56 ( 0.00%) 52.38 ( 4.00%)
Time sp.D 1020.03 ( 0.00%) 903.77 ( 11.40%)
Time ua.D 400.58 ( 0.00%) 386.49 ( 3.52%)
Note it's not a universal win but we have no prior knowledge of which
thread matters but the number of threads created often exceeds the size
of the node when the threads are not bound. However, there is a reducation
of overall system CPU usage:
4.17.0-rc1 4.17.0-rc1
vanilla stagger-v1r1
sys-time-bt.D 48.78 ( 0.00%) 48.22 ( 1.15%)
sys-time-cg.D 25.31 ( 0.00%) 26.63 ( -5.22%)
sys-time-ep.D 1.65 ( 0.00%) 0.62 ( 62.42%)
sys-time-is.D 40.05 ( 0.00%) 24.45 ( 38.95%)
sys-time-lu.D 37.55 ( 0.00%) 29.02 ( 22.72%)
sys-time-mg.D 47.52 ( 0.00%) 34.92 ( 26.52%)
sys-time-sp.D 119.01 ( 0.00%) 109.05 ( 8.37%)
sys-time-ua.D 51.52 ( 0.00%) 45.13 ( 12.40%)
NUMA scan activity is also reduced:
NUMA alloc local 1042828 1342670
NUMA base PTE updates 140481138 93577468
NUMA huge PMD updates 272171 180766
NUMA page range updates 279832690 186129660
NUMA hint faults 1395972 1193897
NUMA hint local faults 877925 855053
NUMA hint local percent 62 71
NUMA pages migrated 12057909 9158023
Similar observations are made for other thread-intensive workloads. System
CPU usage is lower even though the headline gains in performance tend to be
small. For example, specjbb 2005 shows almost no difference in performance
but scan activity is reduced by a third on a 4-socket box. I didn't find
a workload (thread intensive or otherwise) that suffered badly.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180504154109.mvrha2qo5wdl65vr@techsingularity.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86/pti updates from Thomas Gleixner:
"A mixed bag of fixes and updates for the ghosts which are hunting us.
The scheduler fixes have been pulled into that branch to avoid
conflicts.
- A set of fixes to address a khread_parkme() race which caused lost
wakeups and loss of state.
- A deadlock fix for stop_machine() solved by moving the wakeups
outside of the stopper_lock held region.
- A set of Spectre V1 array access restrictions. The possible
problematic spots were discuvered by Dan Carpenters new checks in
smatch.
- Removal of an unused file which was forgotten when the rest of that
functionality was removed"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vdso: Remove unused file
perf/x86/cstate: Fix possible Spectre-v1 indexing for pkg_msr
perf/x86/msr: Fix possible Spectre-v1 indexing in the MSR driver
perf/x86: Fix possible Spectre-v1 indexing for x86_pmu::event_map()
perf/x86: Fix possible Spectre-v1 indexing for hw_perf_event cache_*
perf/core: Fix possible Spectre-v1 indexing for ->aux_pages[]
sched/autogroup: Fix possible Spectre-v1 indexing for sched_prio_to_weight[]
sched/core: Fix possible Spectre-v1 indexing for sched_prio_to_weight[]
sched/core: Introduce set_special_state()
kthread, sched/wait: Fix kthread_parkme() completion issue
kthread, sched/wait: Fix kthread_parkme() wait-loop
sched/fair: Fix the update of blocked load when newly idle
stop_machine, sched: Fix migrate_swap() vs. active_balance() deadlock
Pull scheduler fix from Thomas Gleixner:
"Revert the new NUMA aware placement approach which turned out to
create more problems than it solved"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "sched/numa: Delay retrying placement for automatic NUMA balance after wake_affine()"
So far, MSIs have been used to signal edge-triggered interrupts, as
a write is a good model for an edge (you can't "unwrite" something).
On the other hand, routing zillions of wires in an SoC because you
need level interrupts is a bit extreme.
People have come up with a variety of schemes to support this, which
involves sending two messages: one to signal the interrupt, and one
to clear it. Since the kernel cannot represent this, we've ended up
with side-band mechanisms that are pretty awful.
Instead, let's acknoledge the requirement, and ensure that, under the
right circumstances, the irq_compose_msg and irq_write_msg can take
as a parameter an array of two messages instead of a pointer to a
single one. We also add some checking that the compose method only
clobbers the second message if the MSI domain has been created with
the MSI_FLAG_LEVEL_CAPABLE flags.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lkml.kernel.org/r/20180508121438.11301-2-marc.zyngier@arm.com
Those three warnings can easily solved by using :: to indicate a
code block:
./kernel/time/timer.c:1259: WARNING: Unexpected indentation.
./kernel/time/timer.c:1261: WARNING: Unexpected indentation.
./kernel/time/timer.c:1262: WARNING: Block quote ends without a blank line; unexpected unindent.
While here, align the lines at the block.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Linux Doc Mailing List <linux-doc@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/f02e6a0ce27f3b5e33415d92d07a40598904b3ee.1525684985.git.mchehab%2Bsamsung@kernel.org
Checking the equality of cpumask for both new and old tick device doesn't
ensure that it's CPU local device. This will cause issue if a low rating
clockevent tick device is registered first followed by the registration
of higher rating clockevent tick device.
In such case, clockevents_released list will never get emptied as both
the devices get selected as preferred one and we will loop forever in
clockevents_notify_released.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: https://lkml.kernel.org/r/1525881728-4858-1-git-send-email-sudeep.holla@arm.com
This reverts commit 7347fc87df.
Srikar Dronamra pointed out that while the commit in question did show
a performance improvement on ppc64, it did so at the cost of disabling
active CPU migration by automatic NUMA balancing which was not the intent.
The issue was that a serious flaw in the logic failed to ever active balance
if SD_WAKE_AFFINE was disabled on scheduler domains. Even when it's enabled,
the logic is still bizarre and against the original intent.
Investigation showed that fixing the patch in either the way he suggested,
using the correct comparison for jiffies values or introducing a new
numa_migrate_deferred variable in task_struct all perform similarly to a
revert with a mix of gains and losses depending on the workload, machine
and socket count.
The original intent of the commit was to handle a problem whereby
wake_affine, idle balancing and automatic NUMA balancing disagree on the
appropriate placement for a task. This was particularly true for cases where
a single task was a massive waker of tasks but where wake_wide logic did
not apply. This was particularly noticeable when a futex (a barrier) woke
all worker threads and tried pulling the wakees to the waker nodes. In that
specific case, it could be handled by tuning MPI or openMP appropriately,
but the behavior is not illogical and was worth attempting to fix. However,
the approach was wrong. Given that we're at rc4 and a fix is not obvious,
it's better to play safe, revert this commit and retry later.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: efault@gmx.de
Cc: ggherdovich@suse.cz
Cc: hpa@zytor.com
Cc: matt@codeblueprint.co.uk
Cc: mpe@ellerman.id.au
Link: http://lkml.kernel.org/r/20180509163115.6fnnyeg4vdm2ct4v@techsingularity.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge misc fixes from Andrew Morton:
"13 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
rbtree: include rcu.h
scripts/faddr2line: fix error when addr2line output contains discriminator
ocfs2: take inode cluster lock before moving reflinked inode from orphan dir
mm, oom: fix concurrent munlock and oom reaper unmap, v3
mm: migrate: fix double call of radix_tree_replace_slot()
proc/kcore: don't bounds check against address 0
mm: don't show nr_indirectly_reclaimable in /proc/vmstat
mm: sections are not offlined during memory hotremove
z3fold: fix reclaim lock-ups
init: fix false positives in W+X checking
lib/find_bit_benchmark.c: avoid soft lockup in test_find_first_bit()
KASAN: prohibit KASAN+STRUCTLEAK combination
MAINTAINERS: update Shuah's email address
The bpf syscall and selftests conflicts were trivial
overlapping changes.
The r8169 change involved moving the added mdelay from 'net' into a
different function.
A TLS close bug fix overlapped with the splitting of the TLS state
into separate TX and RX parts. I just expanded the tests in the bug
fix from "ctx->conf == X" into "ctx->tx_conf == X && ctx->rx_conf
== X".
Signed-off-by: David S. Miller <davem@davemloft.net>
load_module() creates W+X mappings via __vmalloc_node_range() (from
layout_and_allocate()->move_module()->module_alloc()) by using
PAGE_KERNEL_EXEC. These mappings are later cleaned up via
"call_rcu_sched(&freeinit->rcu, do_free_init)" from do_init_module().
This is a problem because call_rcu_sched() queues work, which can be run
after debug_checkwx() is run, resulting in a race condition. If hit,
the race results in a nasty splat about insecure W+X mappings, which
results in a poor user experience as these are not the mappings that
debug_checkwx() is intended to catch.
This issue is observed on multiple arm64 platforms, and has been
artificially triggered on an x86 platform.
Address the race by flushing the queued work before running the
arch-defined mark_rodata_ro() which then calls debug_checkwx().
Link: http://lkml.kernel.org/r/1525103946-29526-1-git-send-email-jhugo@codeaurora.org
Fixes: e1a58320a3 ("x86/mm: Warn on W^X mappings")
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reported-by: Timur Tabi <timur@codeaurora.org>
Reported-by: Jan Glauber <jan.glauber@caviumnetworks.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking fixes from David Miller:
1) Verify lengths of keys provided by the user is AF_KEY, from Kevin
Easton.
2) Add device ID for BCM89610 PHY. Thanks to Bhadram Varka.
3) Add Spectre guards to some ATM code, courtesy of Gustavo A. R.
Silva.
4) Fix infinite loop in NSH protocol code. To Eric Dumazet we are most
grateful for this fix.
5) Line up /proc/net/netlink headers properly. This fix from YU Bo, we
do appreciate.
6) Use after free in TLS code. Once again we are blessed by the
honorable Eric Dumazet with this fix.
7) Fix regression in TLS code causing stalls on partial TLS records.
This fix is bestowed upon us by Andrew Tomt.
8) Deal with too small MTUs properly in LLC code, another great gift
from Eric Dumazet.
9) Handle cached route flushing properly wrt. MTU locking in ipv4, to
Hangbin Liu we give thanks for this.
10) Fix regression in SO_BINDTODEVIC handling wrt. UDP socket demux.
Paolo Abeni, he gave us this.
11) Range check coalescing parameters in mlx4 driver, thank you Moshe
Shemesh.
12) Some ipv6 ICMP error handling fixes in rxrpc, from our good brother
David Howells.
13) Fix kexec on mlx5 by freeing IRQs in shutdown path. Daniel Juergens,
you're the best!
14) Don't send bonding RLB updates to invalid MAC addresses. Debabrata
Benerjee saved us!
15) Uh oh, we were leaking in udp_sendmsg and ping_v4_sendmsg. The ship
is now water tight, thanks to Andrey Ignatov.
16) IPSEC memory leak in ixgbe from Colin Ian King, man we've got holes
everywhere!
17) Fix error path in tcf_proto_create, Jiri Pirko what would we do
without you!
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (92 commits)
net sched actions: fix refcnt leak in skbmod
net: sched: fix error path in tcf_proto_create() when modules are not configured
net sched actions: fix invalid pointer dereferencing if skbedit flags missing
ixgbe: fix memory leak on ipsec allocation
ixgbevf: fix ixgbevf_xmit_frame()'s return type
ixgbe: return error on unsupported SFP module when resetting
ice: Set rq_last_status when cleaning rq
ipv4: fix memory leaks in udp_sendmsg, ping_v4_sendmsg
mlxsw: core: Fix an error handling path in 'mlxsw_core_bus_device_register()'
bonding: send learning packets for vlans on slave
bonding: do not allow rlb updates to invalid mac
net/mlx5e: Err if asked to offload TC match on frag being first
net/mlx5: E-Switch, Include VF RDMA stats in vport statistics
net/mlx5: Free IRQs in shutdown path
rxrpc: Trace UDP transmission failure
rxrpc: Add a tracepoint to log ICMP/ICMP6 and error messages
rxrpc: Fix the min security level for kernel calls
rxrpc: Fix error reception on AF_INET6 sockets
rxrpc: Fix missing start of call timeout
qed: fix spelling mistake: "taskelt" -> "tasklet"
...
regex_match_front() test was updated to be limited to the size
of the pattern instead of the full test string. But as the test string
is not guaranteed to be nul terminated, it still needs to consider
the size of the test string.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWvWzNRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhiPAP9bmOzqT3YK+dF19pLJCrmjyF95Wh85
/10xaH3G1Q5e8AEA3ZXQqVNEGnaEs2uO/c5yvTP6/k1WEfGuTqTO5IH2hwI=
=cKB5
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Working on some new updates to trace filtering, I noticed that the
regex_match_front() test was updated to be limited to the size of the
pattern instead of the full test string.
But as the test string is not guaranteed to be nul terminated, it
still needs to consider the size of the test string"
* tag 'trace-v4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix regex_match_front() to not over compare the test string
- Restore device_may_wakeup() check in pci_enable_wake() removed
inadvertently during the 4.13 cycle to prevent systems from
drawing excessive power when suspended or off, among other
things (Rafael Wysocki).
- Fix pci_dev_run_wake() to properly handle devices that only can
signal PME# when in the D3cold power state (Kai Heng Feng).
- Fix the schedutil cpufreq governor to avoid using UINT_MAX
as the new CPU frequency in some cases due to a missing check
(Rafael Wysocki).
- Remove a stale comment regarding worker kthreads from the
schedutil cpufreq governor (Juri Lelli).
- Fix a copy-paste mistake in the intel_pstate driver documentation
(Juri Lelli).
- Fix a typo in the system sleep states documentation (Jonathan
Neuschäfer).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=bCt1
-----END PGP SIGNATURE-----
Merge tag 'pm-4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two PCI power management regressions from the 4.13 cycle and
one cpufreq schedutil governor bug introduced during the 4.12 cycle,
drop a stale comment from the schedutil code and fix two mistakes in
docs.
Specifics:
- Restore device_may_wakeup() check in pci_enable_wake() removed
inadvertently during the 4.13 cycle to prevent systems from drawing
excessive power when suspended or off, among other things (Rafael
Wysocki).
- Fix pci_dev_run_wake() to properly handle devices that only can
signal PME# when in the D3cold power state (Kai Heng Feng).
- Fix the schedutil cpufreq governor to avoid using UINT_MAX as the
new CPU frequency in some cases due to a missing check (Rafael
Wysocki).
- Remove a stale comment regarding worker kthreads from the schedutil
cpufreq governor (Juri Lelli).
- Fix a copy-paste mistake in the intel_pstate driver documentation
(Juri Lelli).
- Fix a typo in the system sleep states documentation (Jonathan
Neuschäfer)"
* tag 'pm-4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PCI / PM: Check device_may_wakeup() in pci_enable_wake()
PCI / PM: Always check PME wakeup capability for runtime wakeup support
cpufreq: schedutil: Avoid using invalid next_freq
cpufreq: schedutil: remove stale comment
PM: docs: intel_pstate: fix Active Mode w/o HWP paragraph
PM: docs: sleep-states: Fix a typo ("includig")
The regex match function regex_match_front() in the tracing filter logic,
was fixed to test just the pattern length from testing the entire test
string. That is, it went from strncmp(str, r->pattern, len) to
strcmp(str, r->pattern, r->len).
The issue is that str is not guaranteed to be nul terminated, and if r->len
is greater than the length of str, it can access more memory than is
allocated.
The solution is to add a simple test if (len < r->len) return 0.
Cc: stable@vger.kernel.org
Fixes: 285caad415 ("tracing/filters: Fix MATCH_FRONT_ONLY filter matching")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Commit 3a4d44b616 ("ntp: Move adjtimex related compat syscalls to
native counterparts") removed the memset() in compat_get_timex(). Since
then, the compat adjtimex syscall can invoke do_adjtimex() with an
uninitialized ->tai.
If do_adjtimex() doesn't write to ->tai (e.g. because the arguments are
invalid), compat_put_timex() then copies the uninitialized ->tai field
to userspace.
Fix it by adding the memset() back.
Fixes: 3a4d44b616 ("ntp: Move adjtimex related compat syscalls to native counterparts")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When wakelock support was added, the wakeup_source_add() function
was updated to set the last_time value of the wakeup source. This
has the unintended side effect of producing confusing output from
pm_print_active_wakeup_sources() when a wakeup source is added
prior to a sleep that is blocked by a different wakeup source.
The function pm_print_active_wakeup_sources() will search for the
most recently active wakeup source when no active source is found.
If a wakeup source is added after a different wakeup source blocks
the system from going to sleep it may have a later last_time value
than the blocking source and be output as the last active wakeup
source even if it has never actually been active.
It looks to me like the change to wakeup_source_add() was made to
prevent the wakelock garbage collection from accidentally dropping
a wakelock during the narrow window between adding the wakelock to
the wakelock list in wakelock_lookup_add() and the activation of
the wakeup source in pm_wake_lock().
This commit changes the behavior so that only the last_time of the
wakeup source used by a wakelock is initialized prior to adding it
to the wakeup source list. This preserves the meaning of the
last_time value as the last time the wakeup source was active and
allows a wakeup source that has never been active to have a
last_time value of 0.
Fixes: b86ff9820f (PM / Sleep: Add user space interface for manipulating wakeup sources, v3)
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It's fairly easy for offloaded XDP programs to select the RX queue
packets go to. We need a way of expressing this in the software.
Allow write to the rx_queue_index field of struct xdp_md for
device-bound programs.
Skip convert_ctx_access callback entirely for offloads.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
During BPF_OBJ_GET_INFO_BY_FD on a btf_fd, the current bpf_attr's
info.info is directly filled with the BTF binary data. It is
not extensible. In this case, we want to add BTF ID.
This patch adds "struct bpf_btf_info" which has the BTF ID as
one of its member. The BTF binary data itself is exposed through
the "btf" and "btf_size" members.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch gives an ID to each loaded BTF. The ID is allocated by
the idr like the existing prog-id and map-id.
The bpf_put(map->btf) is moved to __bpf_map_put() so that the
userspace can stop seeing the BTF ID ASAP when the last BTF
refcnt is gone.
It also makes BTF accessible from userspace through the
1. new BPF_BTF_GET_FD_BY_ID command. It is limited to CAP_SYS_ADMIN
which is inline with the BPF_BTF_LOAD cmd and the existing
BPF_[MAP|PROG]_GET_FD_BY_ID cmd.
2. new btf_id (and btf_key_id + btf_value_id) in "struct bpf_map_info"
Once the BTF ID handler is accessible from userspace, freeing a BTF
object has to go through a rcu period. The BPF_BTF_GET_FD_BY_ID cmd
can then be done under a rcu_read_lock() instead of taking
spin_lock.
[Note: A similar rcu usage can be done to the existing
bpf_prog_get_fd_by_id() in a follow up patch]
When processing the BPF_BTF_GET_FD_BY_ID cmd,
refcount_inc_not_zero() is needed because the BTF object
could be already in the rcu dead row . btf_get() is
removed since its usage is currently limited to btf.c
alone. refcount_inc() is used directly instead.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
If CONFIG_REFCOUNT_FULL=y, refcount_inc() WARN when refcount is 0.
When creating a new btf, the initial btf->refcnt is 0 and
triggered the following:
[ 34.855452] refcount_t: increment on 0; use-after-free.
[ 34.856252] WARNING: CPU: 6 PID: 1857 at lib/refcount.c:153 refcount_inc+0x26/0x30
....
[ 34.868809] Call Trace:
[ 34.869168] btf_new_fd+0x1af6/0x24d0
[ 34.869645] ? btf_type_seq_show+0x200/0x200
[ 34.870212] ? lock_acquire+0x3b0/0x3b0
[ 34.870726] ? security_capable+0x54/0x90
[ 34.871247] __x64_sys_bpf+0x1b2/0x310
[ 34.871761] ? __ia32_sys_bpf+0x310/0x310
[ 34.872285] ? bad_area_access_error+0x310/0x310
[ 34.872894] do_syscall_64+0x95/0x3f0
This patch uses refcount_set() instead.
Reported-by: Yonghong Song <yhs@fb.com>
Tested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
If the next_freq field of struct sugov_policy is set to UINT_MAX,
it shouldn't be used for updating the CPU frequency (this is a
special "invalid" value), but after commit b7eaf1aab9 (cpufreq:
schedutil: Avoid reducing frequency of busy CPUs prematurely) it
may be passed as the new frequency to sugov_update_commit() in
sugov_update_single().
Fix that by adding an extra check for the special UINT_MAX value
of next_freq to sugov_update_single().
Fixes: b7eaf1aab9 (cpufreq: schedutil: Avoid reducing frequency of busy CPUs prematurely)
Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.12+ <stable@vger.kernel.org> # 4.12+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After commit 794a56ebd9 (sched/cpufreq: Change the worker kthread to
SCHED_DEADLINE) schedutil kthreads are "ignored" for a clock frequency
selection point of view, so the potential corner case for RT tasks is not
possible at all now.
Remove the stale comment mentioning it.
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Seccomp logging for "handled" actions such as RET_TRAP, RET_TRACE, or
RET_ERRNO can be very noisy for processes that are being audited. This
patch modifies the seccomp logging behavior to treat processes that are
being inspected via the audit subsystem the same as processes that
aren't under inspection. Handled actions will no longer be logged just
because the process is being inspected. Since v4.14, applications have
the ability to request logging of handled actions by using the
SECCOMP_FILTER_FLAG_LOG flag when loading seccomp filters.
With this patch, the logic for deciding if an action will be logged is:
if action == RET_ALLOW:
do not log
else if action not in actions_logged:
do not log
else if action == RET_KILL:
log
else if action == RET_LOG:
log
else if filter-requests-logging:
log
else:
do not log
Reported-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The decision to log a seccomp action will always be subject to the
value of the kernel.seccomp.actions_logged sysctl, even for processes
that are being inspected via the audit subsystem, in an upcoming patch.
Therefore, we need to emit an audit record on attempts at writing to the
actions_logged sysctl when auditing is enabled.
This patch updates the write handler for the actions_logged sysctl to
emit an audit record on attempts to write to the sysctl. Successful
writes to the sysctl will result in a record that includes a normalized
list of logged actions in the "actions" field and a "res" field equal to
1. Unsuccessful writes to the sysctl will result in a record that
doesn't include the "actions" field and has a "res" field equal to 0.
Not all unsuccessful writes to the sysctl are audited. For example, an
audit record will not be emitted if an unprivileged process attempts to
open the sysctl file for reading since that access control check is not
part of the sysctl's write handler.
Below are some example audit records when writing various strings to the
actions_logged sysctl.
Writing "not-a-real-action", when the kernel.seccomp.actions_logged
sysctl previously was "kill_process kill_thread trap errno trace log",
emits this audit record:
type=CONFIG_CHANGE msg=audit(1525392371.454:120): op=seccomp-logging
actions=? old-actions=kill_process,kill_thread,trap,errno,trace,log
res=0
If you then write "kill_process kill_thread errno trace log", this audit
record is emitted:
type=CONFIG_CHANGE msg=audit(1525392401.645:126): op=seccomp-logging
actions=kill_process,kill_thread,errno,trace,log
old-actions=kill_process,kill_thread,trap,errno,trace,log res=1
If you then write "log log errno trace kill_process kill_thread", which
is unordered and contains the log action twice, it results in the same
actions value as the previous record:
type=CONFIG_CHANGE msg=audit(1525392436.354:132): op=seccomp-logging
actions=kill_process,kill_thread,errno,trace,log
old-actions=kill_process,kill_thread,errno,trace,log res=1
If you then write an empty string to the sysctl, this audit record is
emitted:
type=CONFIG_CHANGE msg=audit(1525392494.413:138): op=seccomp-logging
actions=(none) old-actions=kill_process,kill_thread,errno,trace,log
res=1
No audit records are generated when reading the actions_logged sysctl.
Suggested-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The function that converts a bitmask of seccomp actions that are
allowed to be logged is currently only used for constructing the display
string for the kernel.seccomp.actions_logged sysctl. That string wants a
space character to be used for the separator between actions.
A future patch will make use of the same function for building a string
that will be sent to the audit subsystem for tracking modifications to
the kernel.seccomp.actions_logged sysctl. That string will need to use a
comma as a separator. This patch allows the separator character to be
configurable to meet both needs.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Break the read and write paths of the kernel.seccomp.actions_logged
sysctl into separate functions to maintain readability. An upcoming
change will need to audit writes, but not reads, of this sysctl which
would introduce too many conditional code paths on whether or not the
'write' parameter evaluates to true.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Minor conflict, a CHECK was placed into an if() statement
in net-next, whilst a newline was added to that CHECK
call in 'net'. Thanks to Daniel for the merge resolution.
Signed-off-by: David S. Miller <davem@davemloft.net>
The new helper returns index of the matching string in an array.
We are going to use it here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull clocksource fixes from Thomas Gleixner:
"The recent addition of the early TSC clocksource breaks on machines
which have an unstable TSC because in case that TSC is disabled, then
the clocksource selection logic falls back to the early TSC which is
obviously bogus.
That also unearthed a few robustness issues in the clocksource
derating code which are addressed as well"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Rework stale comment
clocksource: Consistent de-rate when marking unstable
x86/tsc: Fix mark_tsc_unstable()
clocksource: Initialize cs->wd_list
clocksource: Allow clocksource_mark_unstable() on unregistered clocksources
x86/tsc: Always unregister clocksource_tsc_early
when they are writable by root. To fix the confusion, they should
be 0644. Note, either case root can still write to them.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWuyBchQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmDLAQDyddL4DS480WXv3t3I/ZPwjHVuI4qS
cPUsAsjn3Xs9wAD+O6/rE8SL/Q2tUIWlWk9wC4YpGqEoR6R3x98qpnGP3gA=
=L/Kw
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.17-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Some of the files in the tracing directory show file mode 0444 when
they are writable by root. To fix the confusion, they should be 0644.
Note, either case root can still write to them.
Zhengyuan asked why I never applied that patch (the first one is from
2014!). I simply forgot about it. /me lowers head in shame"
* tag 'trace-v4.17-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix the file mode of stack tracer
ftrace: Have set_graph_* files have normal file modes
> kernel/sched/core.c:6921 cpu_weight_nice_write_s64() warn: potential spectre issue 'sched_prio_to_weight'
Userspace controls @nice, so sanitize the value before using it to
index an array.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2018-05-05
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Sanitize attr->{prog,map}_type from bpf(2) since used as an array index
to retrieve prog/map specific ops such that we prevent potential out of
bounds value under speculation, from Mark and Daniel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The migitation control is simpler to implement in architecture code as it
avoids the extra function call to check the mode. Aside of that having an
explicit seccomp enabled mode in the architecture mitigations would require
even more workarounds.
Move it into architecture code and provide a weak function in the seccomp
code. Remove the 'which' argument as this allows the architecture to decide
which mitigations are relevant for seccomp.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If a seccomp user is not interested in Speculative Store Bypass mitigation
by default, it can set the new SECCOMP_FILTER_FLAG_SPEC_ALLOW flag when
adding filters.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If bpf_map_precharge_memlock() did not fail, then we set err to zero.
However, any subsequent failure from either alloc_percpu() or the
bpf_map_area_alloc() will return ERR_PTR(0) which in find_and_alloc_map()
will cause NULL pointer deref.
In devmap we have the convention that we return -EINVAL on page count
overflow, so keep the same logic here and just set err to -ENOMEM
after successful bpf_map_precharge_memlock().
Fixes: fbfc504a24 ("bpf: introduce new bpf AF_XDP map type BPF_MAP_TYPE_XSKMAP")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Björn Töpel <bjorn.topel@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Comments in the verifier refer to free_bpf_prog_info() which
seems to have never existed in tree. Replace it with
free_used_maps().
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Offloads may find host map pointers more useful than map fds.
Map pointers can be used to identify the map, while fds are
only valid within the context of loading process.
Jump to skip_full_check on error in case verifier log overflow
has to be handled (replace_map_fd_with_map_ptr() prints to the
log, driver prep may do that too in the future).
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
bpf_event_output() is useful for offloads to add events to BPF
event rings, export it. Note that export is placed near the stub
since tracing is optional and kernel/bpf/core.c is always going
to be built.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
For asynchronous events originating from the device, like perf event
output, we need to be able to make sure that objects being referred
to by the FW message are valid on the host. FW events can get queued
and reordered. Even if we had a FW message "barrier" we should still
protect ourselves from bogus FW output.
Add a reverse-mapping hash table and record in it all raw map pointers
FW may refer to. Only record neutral maps, i.e. perf event arrays.
These are currently the only objects FW can refer to. Use RCU protection
on the read side, update side is under RTNL.
Since program vs map destruction order is slightly painful for offload
simply take an extra reference on all the recorded maps to make sure
they don't disappear.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
BPF_MAP_TYPE_PERF_EVENT_ARRAY is special as far as offload goes.
The map only holds glue to perf ring, not actual data. Allow
non-offloaded perf event arrays to be used in offloaded programs.
Offload driver can extract the events from HW and put them in
the map for user space to retrieve.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
There are quite a few code snippet like the following in verifier:
subprog_start = 0;
if (env->subprog_cnt == cur_subprog + 1)
subprog_end = insn_cnt;
else
subprog_end = env->subprog_info[cur_subprog + 1].start;
The reason is there is no marker in subprog_info array to tell the end of
it.
We could resolve this issue by introducing a faked "ending" subprog.
The special "ending" subprog is with "insn_cnt" as start offset, so it is
serving as the end mark whenever we iterate over all subprogs.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
It is better to centre all subprog information fields into one structure.
This structure could later serve as function node in call graph.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently, verifier treat main prog and subprog differently. All subprogs
detected are kept in env->subprog_starts while main prog is not kept there.
Instead, main prog is implicitly defined as the prog start at 0.
There is actually no difference between main prog and subprog, it is better
to unify them, and register all progs detected into env->subprog_starts.
This could also help simplifying some code logic.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Call sync_entity_load_avg() directly from find_idlest_cpu() instead of
select_task_rq_fair(), as that's where we need to use task's utilization
value. And call sync_entity_load_avg() only after making sure sched
domain spans over one of the allowed CPUs for the task.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: http://lkml.kernel.org/r/cd019d1753824c81130eae7b43e2bbcec47cc1ad.1524738578.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Rearrange select_task_rq_fair() a bit to avoid executing some
conditional statements in few specific code-paths. That gets rid of the
goto as well.
This shouldn't result in any functional changes.
Tested-by: Rohit Jain <rohit.k.jain@oracle.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: http://lkml.kernel.org/r/20831b8d237bf3a20e4e328286f678b425ff04c9.1524738578.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Gaurav reported a perceived problem with TASK_PARKED, which turned out
to be a broken wait-loop pattern in __kthread_parkme(), but the
reported issue can (and does) in fact happen for states that do not do
condition based sleeps.
When the 'current->state = TASK_RUNNING' store of a previous
(concurrent) try_to_wake_up() collides with the setting of a 'special'
sleep state, we can loose the sleep state.
Normal condition based wait-loops are immune to this problem, but for
sleep states that are not condition based are subject to this problem.
There already is a fix for TASK_DEAD. Abstract that and also apply it
to TASK_STOPPED and TASK_TRACED, both of which are also without
condition based wait-loop.
Reported-by: Gaurav Kohli <gkohli@codeaurora.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull networking fixes from David Miller:
1) Various sockmap fixes from John Fastabend (pinned map handling,
blocking in recvmsg, double page put, error handling during redirect
failures, etc.)
2) Fix dead code handling in x86-64 JIT, from Gianluca Borello.
3) Missing device put in RDS IB code, from Dag Moxnes.
4) Don't process fast open during repair mode in TCP< from Yuchung
Cheng.
5) Move address/port comparison fixes in SCTP, from Xin Long.
6) Handle add a bond slave's master into a bridge properly, from
Hangbin Liu.
7) IPv6 multipath code can operate on unitialized memory due to an
assumption that the icmp header is in the linear SKB area. Fix from
Eric Dumazet.
8) Don't invoke do_tcp_sendpages() recursively via TLS, from Dave
Watson.
9) Fix memory leaks in x86-64 JIT, from Daniel Borkmann.
10) RDS leaks kernel memory to userspace, from Eric Dumazet.
11) DCCP can invoke a tasklet on a freed socket, take a refcount. Also
from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (78 commits)
dccp: fix tasklet usage
smc: fix sendpage() call
net/smc: handle unregistered buffers
net/smc: call consolidation
qed: fix spelling mistake: "offloded" -> "offloaded"
net/mlx5e: fix spelling mistake: "loobpack" -> "loopback"
tcp: restore autocorking
rds: do not leak kernel memory to user land
qmi_wwan: do not steal interfaces from class drivers
ipv4: fix fnhe usage by non-cached routes
bpf: sockmap, fix error handling in redirect failures
bpf: sockmap, zero sg_size on error when buffer is released
bpf: sockmap, fix scatterlist update on error path in send with apply
net_sched: fq: take care of throttled flows before reuse
ipv6: Revert "ipv6: Allow non-gateway ECMP for IPv6"
bpf, x64: fix memleak when not converging on calls
bpf, x64: fix memleak when not converging after image
net/smc: restrict non-blocking connect finish
8139too: Use disable_irq_nosync() in rtl8139_poll_controller()
sctp: fix the issue that the cookie-ack with auth can't get processed
...
Commit 9ef09e35e5 ("bpf: fix possible spectre-v1 in find_and_alloc_map()")
converted find_and_alloc_map() over to use array_index_nospec() to sanitize
map type that user space passes on map creation, and this patch does an
analogous conversion for progs in find_prog_type() as it's also passed from
user space when loading progs as attr->prog_type.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The main part of this work is to finally allow removal of LD_ABS
and LD_IND from the BPF core by reimplementing them through native
eBPF instead. Both LD_ABS/LD_IND were carried over from cBPF and
keeping them around in native eBPF caused way more trouble than
actually worth it. To just list some of the security issues in
the past:
* fdfaf64e75 ("x86: bpf_jit: support negative offsets")
* 35607b02db ("sparc: bpf_jit: fix loads from negative offsets")
* e0ee9c1215 ("x86: bpf_jit: fix two bugs in eBPF JIT compiler")
* 07aee94394 ("bpf, sparc: fix usage of wrong reg for load_skb_regs after call")
* 6d59b7dbf7 ("bpf, s390x: do not reload skb pointers in non-skb context")
* 87338c8e2c ("bpf, ppc64: do not reload skb pointers in non-skb context")
For programs in native eBPF, LD_ABS/LD_IND are pretty much legacy
these days due to their limitations and more efficient/flexible
alternatives that have been developed over time such as direct
packet access. LD_ABS/LD_IND only cover 1/2/4 byte loads into a
register, the load happens in host endianness and its exception
handling can yield unexpected behavior. The latter is explained
in depth in f6b1b3bf0d ("bpf: fix subprog verifier bypass by
div/mod by 0 exception") with similar cases of exceptions we had.
In native eBPF more recent program types will disable LD_ABS/LD_IND
altogether through may_access_skb() in verifier, and given the
limitations in terms of exception handling, it's also disabled
in programs that use BPF to BPF calls.
In terms of cBPF, the LD_ABS/LD_IND is used in networking programs
to access packet data. It is not used in seccomp-BPF but programs
that use it for socket filtering or reuseport for demuxing with
cBPF. This is mostly relevant for applications that have not yet
migrated to native eBPF.
The main complexity and source of bugs in LD_ABS/LD_IND is coming
from their implementation in the various JITs. Most of them keep
the model around from cBPF times by implementing a fastpath written
in asm. They use typically two from the BPF program hidden CPU
registers for caching the skb's headlen (skb->len - skb->data_len)
and skb->data. Throughout the JIT phase this requires to keep track
whether LD_ABS/LD_IND are used and if so, the two registers need
to be recached each time a BPF helper would change the underlying
packet data in native eBPF case. At least in eBPF case, available
CPU registers are rare and the additional exit path out of the
asm written JIT helper makes it also inflexible since not all
parts of the JITer are in control from plain C. A LD_ABS/LD_IND
implementation in eBPF therefore allows to significantly reduce
the complexity in JITs with comparable performance results for
them, e.g.:
test_bpf tcpdump port 22 tcpdump complex
x64 - before 15 21 10 14 19 18
- after 7 10 10 7 10 15
arm64 - before 40 91 92 40 91 151
- after 51 64 73 51 62 113
For cBPF we now track any usage of LD_ABS/LD_IND in bpf_convert_filter()
and cache the skb's headlen and data in the cBPF prologue. The
BPF_REG_TMP gets remapped from R8 to R2 since it's mainly just
used as a local temporary variable. This allows to shrink the
image on x86_64 also for seccomp programs slightly since mapping
to %rsi is not an ereg. In callee-saved R8 and R9 we now track
skb data and headlen, respectively. For normal prologue emission
in the JITs this does not add any extra instructions since R8, R9
are pushed to stack in any case from eBPF side. cBPF uses the
convert_bpf_ld_abs() emitter which probes the fast path inline
already and falls back to bpf_skb_load_helper_{8,16,32}() helper
relying on the cached skb data and headlen as well. R8 and R9
never need to be reloaded due to bpf_helper_changes_pkt_data()
since all skb access in cBPF is read-only. Then, for the case
of native eBPF, we use the bpf_gen_ld_abs() emitter, which calls
the bpf_skb_load_helper_{8,16,32}_no_cache() helper unconditionally,
does neither cache skb data and headlen nor has an inlined fast
path. The reason for the latter is that native eBPF does not have
any extra registers available anyway, but even if there were, it
avoids any reload of skb data and headlen in the first place.
Additionally, for the negative offsets, we provide an alternative
bpf_skb_load_bytes_relative() helper in eBPF which operates
similarly as bpf_skb_load_bytes() and allows for more flexibility.
Tested myself on x64, arm64, s390x, from Sandipan on ppc64.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It's possible for userspace to control attr->map_type. Sanitize it when
using it as an array index to prevent an out-of-bounds value being used
under speculation.
Found by smatch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: netdev@vger.kernel.org
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The xskmap is yet another BPF map, very much inspired by
dev/cpu/sockmap, and is a holder of AF_XDP sockets. A user application
adds AF_XDP sockets into the map, and by using the bpf_redirect_map
helper, an XDP program can redirect XDP frames to an AF_XDP socket.
Note that a socket that is bound to certain ifindex/queue index will
*only* accept XDP frames from that netdev/queue index. If an XDP
program tries to redirect from a netdev/queue index other than what
the socket is bound to, the frame will not be received on the socket.
A socket can reside in multiple maps.
v3: Fixed race and simplified code.
v2: Removed one indirection in map lookup.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It looks weird that the stack_trace_filter file can be written by root
but shows that it does not have write permission by ll command.
Link: http://lkml.kernel.org/r/1518054113-28096-1-git-send-email-liuzhengyuan@kylinos.cn
Signed-off-by: Zhengyuan Liu <liuzhengyuan@kylinos.cn>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The set_graph_function and set_graph_notrace file mode should be 0644
instead of 0444 as they are writeable. Note, the mode appears to be ignored
regardless, but they should at least look sane.
Link: http://lkml.kernel.org/r/1409725869-4501-1-git-send-email-linx.z.chen@intel.com
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Chen LinX <linx.z.chen@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
config TRACING_SUPPORT has an exception for PPC32, because PPC32
didn't have irqflags tracing support.
But that hasn't been true since commit 5d38902c48 ("powerpc: Add
irqtrace support for 32-bit powerpc") (Jun 2009).
So remove the exception for PPC32 and the comment.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When speculation flaw mitigations are opt-in (via prctl), using seccomp
will automatically opt-in to these protections, since using seccomp
indicates at least some level of sandboxing is desired.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Adjust arch_prctl_get/set_spec_ctrl() to operate on tasks other than
current.
This is needed both for /proc/$pid/status queries and for seccomp (since
thread-syncing can trigger seccomp in non-current threads).
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add two new prctls to control aspects of speculation related vulnerabilites
and their mitigations to provide finer grained control over performance
impacting mitigations.
PR_GET_SPECULATION_CTRL returns the state of the speculation misfeature
which is selected with arg2 of prctl(2). The return value uses bit 0-2 with
the following meaning:
Bit Define Description
0 PR_SPEC_PRCTL Mitigation can be controlled per task by
PR_SET_SPECULATION_CTRL
1 PR_SPEC_ENABLE The speculation feature is enabled, mitigation is
disabled
2 PR_SPEC_DISABLE The speculation feature is disabled, mitigation is
enabled
If all bits are 0 the CPU is not affected by the speculation misfeature.
If PR_SPEC_PRCTL is set, then the per task control of the mitigation is
available. If not set, prctl(PR_SET_SPECULATION_CTRL) for the speculation
misfeature will fail.
PR_SET_SPECULATION_CTRL allows to control the speculation misfeature, which
is selected by arg2 of prctl(2) per task. arg3 is used to hand in the
control value, i.e. either PR_SPEC_ENABLE or PR_SPEC_DISABLE.
The common return values are:
EINVAL prctl is not implemented by the architecture or the unused prctl()
arguments are not 0
ENODEV arg2 is selecting a not supported speculation misfeature
PR_SET_SPECULATION_CTRL has these additional return values:
ERANGE arg3 is incorrect, i.e. it's not either PR_SPEC_ENABLE or PR_SPEC_DISABLE
ENXIO prctl control of the selected speculation misfeature is disabled
The first supported controlable speculation misfeature is
PR_SPEC_STORE_BYPASS. Add the define so this can be shared between
architectures.
Based on an initial patch from Tim Chen and mostly rewritten.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Even with the wait-loop fixed, there is a further issue with
kthread_parkme(). Upon hotplug, when we do takedown_cpu(),
smpboot_park_threads() can return before all those threads are in fact
blocked, due to the placement of the complete() in __kthread_parkme().
When that happens, sched_cpu_dying() -> migrate_tasks() can end up
migrating such a still runnable task onto another CPU.
Normally the task will have hit schedule() and gone to sleep by the
time we do kthread_unpark(), which will then do __kthread_bind() to
re-bind the task to the correct CPU.
However, when we loose the initial TASK_PARKED store to the concurrent
wakeup issue described previously, do the complete(), get migrated, it
is possible to either:
- observe kthread_unpark()'s clearing of SHOULD_PARK and terminate
the park and set TASK_RUNNING, or
- __kthread_bind()'s wait_task_inactive() to observe the competing
TASK_RUNNING store.
Either way the WARN() in __kthread_bind() will trigger and fail to
correctly set the CPU affinity.
Fix this by only issuing the complete() when the kthread has scheduled
out. This does away with all the icky 'still running' nonsense.
The alternative is to promote TASK_PARKED to a special state, this
guarantees wait_task_inactive() cannot observe a 'stale' TASK_RUNNING
and we'll end up doing the right thing, but this preserves the whole
icky business of potentially migating the still runnable thing.
Reported-by: Gaurav Kohli <gkohli@codeaurora.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Gaurav reported a problem with __kthread_parkme() where a concurrent
try_to_wake_up() could result in competing stores to ->state which,
when the TASK_PARKED store got lost bad things would happen.
The comment near set_current_state() actually mentions this competing
store, but only mentions the case against TASK_RUNNING. This same
store, with different timing, can happen against a subsequent !RUNNING
store.
This normally is not a problem, because as per that same comment, the
!RUNNING state store is inside a condition based wait-loop:
for (;;) {
set_current_state(TASK_UNINTERRUPTIBLE);
if (!need_sleep)
break;
schedule();
}
__set_current_state(TASK_RUNNING);
If we loose the (first) TASK_UNINTERRUPTIBLE store to a previous
(concurrent) wakeup, the schedule() will NO-OP and we'll go around the
loop once more.
The problem here is that the TASK_PARKED store is not inside the
KTHREAD_SHOULD_PARK condition wait-loop.
There is a genuine issue with sleeps that do not have a condition;
this is addressed in a subsequent patch.
Reported-by: Gaurav Kohli <gkohli@codeaurora.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With commit:
31e77c93e4 ("sched/fair: Update blocked load when newly idle")
... we release the rq->lock when updating blocked load of idle CPUs.
This opens a time window during which another CPU can add a task to this
CPU's cfs_rq.
The check for newly added task of idle_balance() is not in the common path.
Move the out label to include this check.
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 31e77c93e4 ("sched/fair: Update blocked load when newly idle")
Link: http://lkml.kernel.org/r/20180426103133.GA6953@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Matt reported the following deadlock:
CPU0 CPU1
schedule(.prev=migrate/0) <fault>
pick_next_task() ...
idle_balance() migrate_swap()
active_balance() stop_two_cpus()
spin_lock(stopper0->lock)
spin_lock(stopper1->lock)
ttwu(migrate/0)
smp_cond_load_acquire() -- waits for schedule()
stop_one_cpu(1)
spin_lock(stopper1->lock) -- waits for stopper lock
Fix this deadlock by taking the wakeups out from under stopper->lock.
This allows the active_balance() to queue the stop work and finish the
context switch, which in turn allows the wakeup from migrate_swap() to
observe the context and complete the wakeup.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180420095005.GH4064@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Tracepoints should not give warning on OOM failures
- Use special field for function pointer in trace event
- Fix igrab issues in uprobes
- Fixes to the new histogram triggers
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWuoYdBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qtFnAP9X4+AVDQH0VfsMLSc9D+rK6WmcRIhv
q8J2gNPv3anM+AD/SFXWGO4ihN+0KDw/TqmJxESNEybq47vTZ/s5lM6A4gQ=
=fQbj
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various fixes in tracing:
- Tracepoints should not give warning on OOM failures
- Use special field for function pointer in trace event
- Fix igrab issues in uprobes
- Fixes to the new histogram triggers"
* tag 'trace-v4.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracepoint: Do not warn on ENOMEM
tracing: Add field modifier parsing hist error for hist triggers
tracing: Add field parsing hist error for hist triggers
tracing: Restore proper field flag printing when displaying triggers
tracing: initcall: Ordered comparison of function pointers
tracing: Remove igrab() iput() call from uprobes.c
tracing: Fix bad use of igrab in trace_uprobe.c
When a redirect failure happens we release the buffers in-flight
without calling a sk_mem_uncharge(), the uncharge is called before
dropping the sock lock for the redirecte, however we missed updating
the ring start index. When no apply actions are in progress this
is OK because we uncharge the entire buffer before the redirect.
But, when we have apply logic running its possible that only a
portion of the buffer is being redirected. In this case we only
do memory accounting for the buffer slice being redirected and
expect to be able to loop over the BPF program again and/or if
a sock is closed uncharge the memory at sock destruct time.
With an invalid start index however the program logic looks at
the start pointer index, checks the length, and when seeing the
length is zero (from the initial release and failure to update
the pointer) aborts without uncharging/releasing the remaining
memory.
The fix for this is simply to update the start index. To avoid
fixing this error in two locations we do a small refactor and
remove one case where it is open-coded. Then fix it in the
single function.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When an error occurs during a redirect we have two cases that need
to be handled (i) we have a cork'ed buffer (ii) we have a normal
sendmsg buffer.
In the cork'ed buffer case we don't currently support recovering from
errors in a redirect action. So the buffer is released and the error
should _not_ be pushed back to the caller of sendmsg/sendpage. The
rationale here is the user will get an error that relates to old
data that may have been sent by some arbitrary thread on that sock.
Instead we simple consume the data and tell the user that the data
has been consumed. We may add proper error recovery in the future.
However, this patch fixes a bug where the bytes outstanding counter
sg_size was not zeroed. This could result in a case where if the user
has both a cork'ed action and apply action in progress we may
incorrectly call into the BPF program when the user expected an
old verdict to be applied via the apply action. I don't have a use
case where using apply and cork at the same time is valid but we
never explicitly reject it because it should work fine. This patch
ensures the sg_size is zeroed so we don't have this case.
In the normal sendmsg buffer case (no cork data) we also do not
zero sg_size. Again this can confuse the apply logic when the logic
calls into the BPF program when the BPF programmer expected the old
verdict to remain. So ensure we set sg_size to zero here as well. And
additionally to keep the psock state in-sync with the sk_msg_buff
release all the memory as well. Previously we did this before
returning to the user but this left a gap where psock and sk_msg_buff
states were out of sync which seems fragile. No additional overhead
is taken here except for a call to check the length and realize its
already been freed. This is in the error path as well so in my
opinion lets have robust code over optimized error paths.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When the call to do_tcp_sendpage() fails to send the complete block
requested we either retry if only a partial send was completed or
abort if we receive a error less than or equal to zero. Before
returning though we must update the scatterlist length/offset to
account for any partial send completed.
Before this patch we did this at the end of the retry loop, but
this was buggy when used while applying a verdict to fewer bytes
than in the scatterlist. When the scatterlist length was being set
we forgot to account for the apply logic reducing the size variable.
So the result was we chopped off some bytes in the scatterlist without
doing proper cleanup on them. This results in a WARNING when the
sock is tore down because the bytes have previously been charged to
the socket but are never uncharged.
The simple fix is to simply do the accounting inside the retry loop
subtracting from the absolute scatterlist values rather than trying
to accumulate the totals and subtract at the end.
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This is the io_getevents equivalent of ppoll/pselect and allows to
properly mix signals and aio completions (especially with IOCB_CMD_POLL)
and atomically executes the following sequence:
sigset_t origmask;
pthread_sigmask(SIG_SETMASK, &sigmask, &origmask);
ret = io_getevents(ctx, min_nr, nr, events, timeout);
pthread_sigmask(SIG_SETMASK, &origmask, NULL);
Note that unlike many other signal related calls we do not pass a sigmask
size, as that would get us to 7 arguments, which aren't easily supported
by the syscall infrastructure. It seems a lot less painful to just add a
new syscall variant in the unlikely case we're going to increase the
sigset size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
A number of places relies on list_empty(&cs->wd_list), however the
list_head does not get initialized. Do so upon registration, such that
thereafter it is possible to rely on list_empty() correctly reflecting
the list membership status.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Diego Viola <diego.viola@gmail.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable@vger.kernel.org
Cc: len.brown@intel.com
Cc: rjw@rjwysocki.net
Cc: rui.zhang@intel.com
Link: https://lkml.kernel.org/r/20180430100344.472662715@infradead.org
Because of how the code flips between tsc-early and tsc clocksources
it might need to mark one or both unstable. The current code in
mark_tsc_unstable() only worked because previously it registered the
tsc clocksource once and then never touched it.
Since it now unregisters the tsc-early clocksource, it needs to know
if a clocksource got unregistered and the current cs->mult test
doesn't work for that. Instead use list_empty(&cs->list) to test for
registration.
Furthermore, since clocksource_mark_unstable() needs to place the cs
on the wd_list, it links the cs->list and cs->wd_list serialization.
It must not see a clocsource registered (!empty cs->list) but already
past dequeue_watchdog(). So place {en,de}queue{,_watchdog}() under the
same lock.
Provided cs->list is initialized to empty, this then allows us to
unconditionally use clocksource_mark_unstable(), regardless of the
registration state.
Fixes: aa83c45762 ("x86/tsc: Introduce early tsc clocksource")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Diego Viola <diego.viola@gmail.com>
Cc: len.brown@intel.com
Cc: rjw@rjwysocki.net
Cc: diego.viola@gmail.com
Cc: rui.zhang@intel.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180502135312.GS12217@hirez.programming.kicks-ass.net
tracepoints to bpf core were added as a way to provide introspection
to bpf programs and maps, but after some time it became clear that
this approach is inadequate, so prog_id, map_id and corresponding
get_next_id, get_fd_by_id, get_info_by_fd, prog_query APIs were
introduced and fully adopted by bpftool and other applications.
The tracepoints in bpf core started to rot and causing syzbot warnings:
WARNING: CPU: 0 PID: 3008 at kernel/trace/trace_event_perf.c:274
Kernel panic - not syncing: panic_on_warn set ...
perf_trace_bpf_map_keyval+0x260/0xbd0 include/trace/events/bpf.h:228
trace_bpf_map_update_elem include/trace/events/bpf.h:274 [inline]
map_update_elem kernel/bpf/syscall.c:597 [inline]
SYSC_bpf kernel/bpf/syscall.c:1478 [inline]
Hence this patch deletes tracepoints in bpf core.
Reported-by: Eric Biggers <ebiggers3@gmail.com>
Reported-by: syzbot <bot+a9dbb3c3e64b62536a4bc5ee7bbd4ca627566188@syzkaller.appspotmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently, the bpf_current_task_under_cgroup helper has a check where if
the BPF program is running in_interrupt(), it will return -EINVAL. This
prevents the helper to be used in many useful scenarios, particularly
BPF programs attached to Perf Events.
This commit removes the check. Tested a few NMI (Perf Event) and some
softirq context, the helper returns the correct result.
Signed-off-by: Teng Qin <qinteng@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull timer fixes from Thomas Gleixner:
"Two fixes from the timer departement:
- Fix a long standing issue in the NOHZ tick code which causes RB
tree corruption, delayed timers and other malfunctions. The cause
for this is code which modifies the expiry time of an enqueued
hrtimer.
- Revert the CLOCK_MONOTONIC/CLOCK_BOOTTIME unification due to
regression reports. Seems userspace _is_ relying on the documented
behaviour despite our hope that it wont"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert: Unify CLOCK_MONOTONIC and CLOCK_BOOTTIME
tick/sched: Do not mess with an enqueued hrtimer
When helpers like bpf_get_stack returns an int value
and later on used for arithmetic computation, the LSH and ARSH
operations are often required to get proper sign extension into
64-bit. For example, without this patch:
54: R0=inv(id=0,umax_value=800)
54: (bf) r8 = r0
55: R0=inv(id=0,umax_value=800) R8_w=inv(id=0,umax_value=800)
55: (67) r8 <<= 32
56: R8_w=inv(id=0,umax_value=3435973836800,var_off=(0x0; 0x3ff00000000))
56: (c7) r8 s>>= 32
57: R8=inv(id=0)
With this patch:
54: R0=inv(id=0,umax_value=800)
54: (bf) r8 = r0
55: R0=inv(id=0,umax_value=800) R8_w=inv(id=0,umax_value=800)
55: (67) r8 <<= 32
56: R8_w=inv(id=0,umax_value=3435973836800,var_off=(0x0; 0x3ff00000000))
56: (c7) r8 s>>= 32
57: R8=inv(id=0, umax_value=800,var_off=(0x0; 0x3ff))
With better range of "R8", later on when "R8" is added to other register,
e.g., a map pointer or scalar-value register, the better register
range can be derived and verifier failure may be avoided.
In our later example,
......
usize = bpf_get_stack(ctx, raw_data, max_len, BPF_F_USER_STACK);
if (usize < 0)
return 0;
ksize = bpf_get_stack(ctx, raw_data + usize, max_len - usize, 0);
......
Without improving ARSH value range tracking, the register representing
"max_len - usize" will have smin_value equal to S64_MIN and will be
rejected by verifier.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In verifier function adjust_scalar_min_max_vals,
when src_known is false and the opcode is BPF_LSH/BPF_RSH,
early return will happen in the function. So remove
the branch in handling BPF_LSH/BPF_RSH when src_known is false.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The special property of return values for helpers bpf_get_stack
and bpf_probe_read_str are captured in verifier.
Both helpers return a negative error code or
a length, which is equal to or smaller than the buffer
size argument. This additional information in the
verifier can avoid the condition such as "retval > bufsize"
in the bpf program. For example, for the code blow,
usize = bpf_get_stack(ctx, raw_data, max_len, BPF_F_USER_STACK);
if (usize < 0 || usize > max_len)
return 0;
The verifier may have the following errors:
52: (85) call bpf_get_stack#65
R0=map_value(id=0,off=0,ks=4,vs=1600,imm=0) R1_w=ctx(id=0,off=0,imm=0)
R2_w=map_value(id=0,off=0,ks=4,vs=1600,imm=0) R3_w=inv800 R4_w=inv256
R6=ctx(id=0,off=0,imm=0) R7=map_value(id=0,off=0,ks=4,vs=1600,imm=0)
R9_w=inv800 R10=fp0,call_-1
53: (bf) r8 = r0
54: (bf) r1 = r8
55: (67) r1 <<= 32
56: (bf) r2 = r1
57: (77) r2 >>= 32
58: (25) if r2 > 0x31f goto pc+33
R0=inv(id=0) R1=inv(id=0,smax_value=9223372032559808512,
umax_value=18446744069414584320,
var_off=(0x0; 0xffffffff00000000))
R2=inv(id=0,umax_value=799,var_off=(0x0; 0x3ff))
R6=ctx(id=0,off=0,imm=0) R7=map_value(id=0,off=0,ks=4,vs=1600,imm=0)
R8=inv(id=0) R9=inv800 R10=fp0,call_-1
59: (1f) r9 -= r8
60: (c7) r1 s>>= 32
61: (bf) r2 = r7
62: (0f) r2 += r1
math between map_value pointer and register with unbounded
min value is not allowed
The failure is due to llvm compiler optimization where register "r2",
which is a copy of "r1", is tested for condition while later on "r1"
is used for map_ptr operation. The verifier is not able to track such
inst sequence effectively.
Without the "usize > max_len" condition, there is no llvm optimization
and the below generated code passed verifier:
52: (85) call bpf_get_stack#65
R0=map_value(id=0,off=0,ks=4,vs=1600,imm=0) R1_w=ctx(id=0,off=0,imm=0)
R2_w=map_value(id=0,off=0,ks=4,vs=1600,imm=0) R3_w=inv800 R4_w=inv256
R6=ctx(id=0,off=0,imm=0) R7=map_value(id=0,off=0,ks=4,vs=1600,imm=0)
R9_w=inv800 R10=fp0,call_-1
53: (b7) r1 = 0
54: (bf) r8 = r0
55: (67) r8 <<= 32
56: (c7) r8 s>>= 32
57: (6d) if r1 s> r8 goto pc+24
R0=inv(id=0,umax_value=800,var_off=(0x0; 0x3ff))
R1=inv0 R6=ctx(id=0,off=0,imm=0)
R7=map_value(id=0,off=0,ks=4,vs=1600,imm=0)
R8=inv(id=0,umax_value=800,var_off=(0x0; 0x3ff)) R9=inv800
R10=fp0,call_-1
58: (bf) r2 = r7
59: (0f) r2 += r8
60: (1f) r9 -= r8
61: (bf) r1 = r6
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, stackmap and bpf_get_stackid helper are provided
for bpf program to get the stack trace. This approach has
a limitation though. If two stack traces have the same hash,
only one will get stored in the stackmap table,
so some stack traces are missing from user perspective.
This patch implements a new helper, bpf_get_stack, will
send stack traces directly to bpf program. The bpf program
is able to see all stack traces, and then can do in-kernel
processing or send stack traces to user space through
shared map or bpf_perf_event_output.
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch didn't incur functionality change. The function prototype
got changed so that the same function can be reused later.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Fix display of module section addresses in sysfs, which were getting
hashed with %pK and breaking tools like perf.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ZGdS
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules fix from Jessica Yu:
"Fix display of module section addresses in sysfs, which were getting
hashed with %pK and breaking tools like perf"
* tag 'modules-for-v4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Fix display of wrong module .text address
Here are 2 staging driver fixups for 4.17-rc3.
The first is the remaining stragglers of the irda code removal that you
pointed out during the merge window. The second is a fix for the
wilc1000 driver due to a patch that got merged in 4.17-rc1.
Both of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWuMyew8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymXxACffYtMbj0Vg5pD0yAPqRzJ2iVMVE0AnRkp4BYQ
kXgAjDeSyrdKPUwQ7Hl2
=UNuF
-----END PGP SIGNATURE-----
Merge tag 'staging-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are two staging driver fixups for 4.17-rc3.
The first is the remaining stragglers of the irda code removal that
you pointed out during the merge window. The second is a fix for the
wilc1000 driver due to a patch that got merged in 4.17-rc1.
Both of these have been in linux-next for a while with no reported
issues"
* tag 'staging-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: wilc1000: fix NULL pointer exception in host_int_parse_assoc_resp_info()
staging: irda: remove remaining remants of irda code removal
Use raw-locks in stop_machine() to allow locking in irq-off and
preempt-disabled regions on -RT. This also documents the possible locking
context in general.
[bigeasy: update patch description.]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/20180423191635.6014-1-bigeasy@linutronix.de
try_to_wake_up() might invoke delayacct_blkio_end() while holding the
pi_lock (which is a raw_spinlock_t). delayacct_blkio_end() acquires
task_delay_info.lock which is a spinlock_t. This causes a might sleep splat
on -RT where non raw spinlocks are converted to 'sleeping' spinlocks.
task_delay_info.lock is only held for a short amount of time so it's not a
problem latency wise to make convert it to a raw spinlock.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Balbir Singh <bsingharora@gmail.com>
Link: https://lkml.kernel.org/r/20180423161024.6710-1-bigeasy@linutronix.de
The native clear_pending() function is identical to the PV version, so the
latter can simply be removed.
This fixes the build for systems with >= 16K CPUs using the PV lock implementation.
Reported-by: Waiman Long <longman@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/20180427101619.GB21705@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, the qspinlock_stat code tracks only statistical counts in the
PV qspinlock code. However, it may also be useful to track the number
of locking operations done via the pending code vs. the MCS lock queue
slowpath for the non-PV case.
The qspinlock stat code is modified to do that. The stat counter
pv_lock_slowpath is renamed to lock_slowpath so that it can be used by
both the PV and non-PV cases.
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: paulmck@linux.vnet.ibm.com
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1524738868-31318-14-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When reaching the head of an uncontended queue on the qspinlock slow-path,
using a try_cmpxchg() instead of a cmpxchg() operation to transition the
lock work to _Q_LOCKED_VAL generates slightly better code for x86 and
pretty much identical code for arm64.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1524738868-31318-13-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The qspinlock slowpath must ensure that the MCS node is fully initialised
before it can be reached by another other CPU. This is currently enforced
by using a RELEASE operation when updating the tail and also when linking
the node into the waitqueue, since the control dependency off xchg_tail
is insufficient to enforce sufficient ordering, see:
95bcade33a ("locking/qspinlock: Ensure node is initialised before updating prev->next")
Back-to-back RELEASE operations may be expensive on some architectures,
particularly those that implement them using fences under the hood. We
can replace the two RELEASE operations with a single smp_wmb() fence and
use RELAXED operations for the subsequent publishing of the node.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1524738868-31318-12-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When a locker reaches the head of the queue and takes the lock, a
concurrent locker may enqueue and force the lock holder to spin
whilst its node->next field is initialised. Rather than open-code
a READ_ONCE/cpu_relax() loop, this can be implemented using
smp_cond_load_relaxed() instead.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1524738868-31318-10-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For qspinlocks on ARM64, we would like to use WFE instead
of purely spinning. Qspinlocks internally have lock
contenders spin on an MCS lock.
Update arch_mcs_spin_lock_contended() such that it uses
the new smp_cond_load_acquire() so that ARM64 can also
override this spin loop with its own implementation using WFE.
On x86, this can also be cheaper than spinning on
smp_load_acquire().
Signed-off-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1524738868-31318-9-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Rather than dig into the counter field of the atomic_t inside the
qspinlock structure so that we can call smp_cond_load_acquire(), use
atomic_cond_read_acquire() instead, which operates on the atomic_t
directly.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1524738868-31318-8-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When a queued locker reaches the head of the queue, it claims the lock
by setting _Q_LOCKED_VAL in the lockword. If there isn't contention, it
must also clear the tail as part of this operation so that subsequent
lockers can avoid taking the slowpath altogether.
Currently this is expressed as a cmpxchg() loop that practically only
runs up to two iterations. This is confusing to the reader and unhelpful
to the compiler. Rewrite the cmpxchg() loop without the loop, so that a
failed cmpxchg() implies that there is contention and we just need to
write to _Q_LOCKED_VAL without considering the rest of the lockword.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1524738868-31318-7-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The qspinlock locking slowpath utilises a "pending" bit as a simple form
of an embedded test-and-set lock that can avoid the overhead of explicit
queuing in cases where the lock is held but uncontended. This bit is
managed using a cmpxchg() loop which tries to transition the uncontended
lock word from (0,0,0) -> (0,0,1) or (0,0,1) -> (0,1,1).
Unfortunately, the cmpxchg() loop is unbounded and lockers can be starved
indefinitely if the lock word is seen to oscillate between unlocked
(0,0,0) and locked (0,0,1). This could happen if concurrent lockers are
able to take the lock in the cmpxchg() loop without queuing and pass it
around amongst themselves.
This patch fixes the problem by unconditionally setting _Q_PENDING_VAL
using atomic_fetch_or, and then inspecting the old value to see whether
we need to spin on the current lock owner, or whether we now effectively
hold the lock. The tricky scenario is when concurrent lockers end up
queuing on the lock and the lock becomes available, causing us to see
a lockword of (n,0,0). With pending now set, simply queuing could lead
to deadlock as the head of the queue may not have observed the pending
flag being cleared. Conversely, if the head of the queue did observe
pending being cleared, then it could transition the lock from (n,0,0) ->
(0,0,1) meaning that any attempt to "undo" our setting of the pending
bit could race with a concurrent locker trying to set it.
We handle this race by preserving the pending bit when taking the lock
after reaching the head of the queue and leaving the tail entry intact
if we saw pending set, because we know that the tail is going to be
updated shortly.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1524738868-31318-6-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If a locker taking the qspinlock slowpath reads a lock value indicating
that only the pending bit is set, then it will spin whilst the
concurrent pending->locked transition takes effect.
Unfortunately, there is no guarantee that such a transition will ever be
observed since concurrent lockers could continuously set pending and
hand over the lock amongst themselves, leading to starvation. Whilst
this would probably resolve in practice, it means that it is not
possible to prove liveness properties about the lock and means that lock
acquisition time is unbounded.
Rather than removing the pending->locked spinning from the slowpath
altogether (which has been shown to heavily penalise a 2-threaded
locking stress test on x86), this patch replaces the explicit spinning
with a call to atomic_cond_read_relaxed and allows the architecture to
provide a bound on the number of spins. For architectures that can
respond to changes in cacheline state in their smp_cond_load implementation,
it should be sufficient to use the default bound of 1.
Suggested-by: Waiman Long <longman@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1524738868-31318-4-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
'struct __qspinlock' provides a handy union of fields so that
subcomponents of the lockword can be accessed by name, without having to
manage shifts and masks explicitly and take endianness into account.
This is useful in qspinlock.h and also potentially in arch headers, so
move the 'struct __qspinlock' into 'struct qspinlock' and kill the extra
definition.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1524738868-31318-3-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If the user specifies an invalid field modifier for a hist trigger,
the current code correctly flags that as an error, but doesn't tell
the user what happened.
Fix this by invoking hist_err() with an appropriate message when
invalid modifiers are specified.
Before:
# echo 'hist:keys=pid:ts0=common_timestamp.junkusecs' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
-su: echo: write error: Invalid argument
# cat /sys/kernel/debug/tracing/events/sched/sched_wakeup/hist
After:
# echo 'hist:keys=pid:ts0=common_timestamp.junkusecs' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
-su: echo: write error: Invalid argument
# cat /sys/kernel/debug/tracing/events/sched/sched_wakeup/hist
ERROR: Invalid field modifier: junkusecs
Last command: keys=pid:ts0=common_timestamp.junkusecs
Link: http://lkml.kernel.org/r/b043c59fa79acd06a5f14a1d44dee9e5a3cd1248.1524790601.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If the user specifies a nonexistent field for a hist trigger, the
current code correctly flags that as an error, but doesn't tell the
user what happened.
Fix this by invoking hist_err() with an appropriate message when
nonexistent fields are specified.
Before:
# echo 'hist:keys=pid:ts0=common_timestamp.usecs' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
-su: echo: write error: Invalid argument
# cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist
After:
# echo 'hist:keys=pid:ts0=common_timestamp.usecs' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
-su: echo: write error: Invalid argument
# cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist
ERROR: Couldn't find field: pid
Last command: keys=pid:ts0=common_timestamp.usecs
Link: http://lkml.kernel.org/r/fdc8746969d16906120f162b99dd71c741e0b62c.1524790601.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Reported-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The flag-printing code used when displaying hist triggers somehow got
dropped during refactoring of the inter-event patchset. This restores
it.
Below are a couple examples - in the first case, .usecs wasn't being
displayed properly for common_timestamps and the second illustrates
the same for other flags such as .execname.
Before:
# echo 'hist:key=common_pid.execname:val=count:sort=count' > /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/trigger
# cat /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/trigger
hist:keys=common_pid:vals=hitcount,count:sort=count:size=2048 [active]
# echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
# cat /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
hist:keys=pid:vals=hitcount:ts0=common_timestamp:sort=hitcount:size=2048:clock=global if comm=="cyclictest" [active]
After:
# echo 'hist:key=common_pid.execname:val=count:sort=count' > /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/trigger
# cat /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/trigger
hist:keys=common_pid.execname:vals=hitcount,count:sort=count:size=2048 [active]
# echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
# cat /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
hist:keys=pid:vals=hitcount:ts0=common_timestamp.usecs:sort=hitcount:size=2048:clock=global if comm=="cyclictest" [active]
Link: http://lkml.kernel.org/r/492bab42ff21806600af98a8ea901af10efbee0c.1524790601.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-04-27
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add extensive BPF helper description into include/uapi/linux/bpf.h
and a new script bpf_helpers_doc.py which allows for generating a
man page out of it. Thus, every helper in BPF now comes with proper
function signature, detailed description and return code explanation,
from Quentin.
2) Migrate the BPF collect metadata tunnel tests from BPF samples over
to the BPF selftests and further extend them with v6 vxlan, geneve
and ipip tests, simplify the ipip tests, improve documentation and
convert to bpf_ntoh*() / bpf_hton*() api, from William.
3) Currently, helpers that expect ARG_PTR_TO_MAP_{KEY,VALUE} can only
access stack and packet memory. Extend this to allow such helpers
to also use map values, which enabled use cases where value from
a first lookup can be directly used as a key for a second lookup,
from Paul.
4) Add a new helper bpf_skb_get_xfrm_state() for tc BPF programs in
order to retrieve XFRM state information containing SPI, peer
address and reqid values, from Eyal.
5) Various optimizations in nfp driver's BPF JIT in order to turn ADD
and SUB instructions with negative immediate into the opposite
operation with a positive immediate such that nfp can better fit
small immediates into instructions. Savings in instruction count
up to 4% have been observed, from Jakub.
6) Add the BPF prog's gpl_compatible flag to struct bpf_prog_info
and add support for dumping this through bpftool, from Jiri.
7) Move the BPF sockmap samples over into BPF selftests instead since
sockmap was rather a series of tests than sample anyway and this way
this can be run from automated bots, from John.
8) Follow-up fix for bpf_adjust_tail() helper in order to make it work
with generic XDP, from Nikita.
9) Some follow-up cleanups to BTF, namely, removing unused defines from
BTF uapi header and renaming 'name' struct btf_* members into name_off
to make it more clear they are offsets into string section, from Martin.
10) Remove test_sock_addr from TEST_GEN_PROGS in BPF selftests since
not run directly but invoked from test_sock_addr.sh, from Yonghong.
11) Remove redundant ret assignment in sample BPF loader, from Wang.
12) Add couple of missing files to BPF selftest's gitignore, from Anders.
There are two trivial merge conflicts while pulling:
1) Remove samples/sockmap/Makefile since all sockmap tests have been
moved to selftests.
2) Add both hunks from tools/testing/selftests/bpf/.gitignore to the
file since git should ignore all of them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Update the siginfo_layout function and enum siginfo_layout to represent
all of the possible field layouts of struct siginfo.
This allows the uses of siginfo_layout in um and arm64 where they are testing
for SIL_FAULT to be more accurate as this rules out the other cases.
Further this allows the switch statements on siginfo_layout to be simpler
if perhaps a little more wordy. Making it easier to understand what is
actually going on.
As SIL_FAULT_BNDERR and SIL_FAULT_PKUERR are never expected to appear
in signalfd just treat them as SIL_FAULT. To include them would take
20 extra bytes an pretty much fill up what is left of
signalfd_siginfo.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The only architecture that does not support SEGV_PKUERR is ia64 and
ia64 has not had 32bit support since some time in 2008. Therefore
copy_siginfo_to_user32 and copy_siginfo_from_user32 do not need to
include support for a missing SEGV_PKUERR.
Compile test on ia64.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
- Add workqueue forward declaration (for new work, but a nice clean up)
- seftest fixes for the new histogram code
- Print output fix for hwlat tracer
- Fix missing system call events - due to change in x86 syscall naming
- Fix kprobe address being used by perf being hashed
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWuIMShQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qkrdAQDRrgIGcm4pRGrvPiGhp4FeQKUx3woM
LY10qMYo3St7zwEAn5oor/e/7KQaQSdKQ7QkL690QU2bTO6FXz4VwE1OcgM=
=OHJk
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Add workqueue forward declaration (for new work, but a nice clean up)
- seftest fixes for the new histogram code
- Print output fix for hwlat tracer
- Fix missing system call events - due to change in x86 syscall naming
- Fix kprobe address being used by perf being hashed
* tag 'trace-v4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix missing tab for hwlat_detector print format
selftests: ftrace: Add a testcase for multiple actions on trigger
selftests: ftrace: Fix trigger extended error testcase
kprobes: Fix random address output of blacklist file
tracing: Fix kernel crash while using empty filter with perf
tracing/x86: Update syscall trace events to handle new prefixed syscall func names
tracing: Add missing forward declaration
cgroup_rstat_updated() ensures that the cgroup's rstat is linked to
the parent. If there's no parent, it never gets linked and the
function ends up grabbing and releasing the cgroup_rstat_lock each
time for no reason which can be expensive.
This hasn't been a problem till now because nobody was calling the
function for the root cgroup but rstat is gonna be exposed to
controllers and use cases, so let's get ready. Make
cgroup_rstat_updated() an no-op for the root cgroup.
Signed-off-by: Tejun Heo <tj@kernel.org>
cgroup_rstat_updated() has a small race window where an updated
signaling can race with flush and could be lost till the next update.
This wasn't a problem for the existing usages, but we plan to use
rstat to track counters which need to be accurate.
This patch plugs the race window by synchronizing
cgroup_rstat_updated() and flush path with memory barriers around
cgroup_rstat_cpu->updated_next pointer.
Signed-off-by: Tejun Heo <tj@kernel.org>
This patch adds cgroup_subsys->css_rstat_flush(). If a subsystem has
this callback, its csses are linked on cgrp->css_rstat_list and rstat
will call the function whenever the associated cgroup is flushed.
Flush is also performed when such csses are released so that residual
counts aren't lost.
Combined with the rstat API previous patches factored out, this allows
controllers to plug into rstat to manage their statistics in a
scalable way.
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, rstat flush path is protected with a mutex which is fine as
all the existing users are from interface file show path. However,
rstat is being generalized for use by controllers and flushing from
atomic contexts will be necessary.
This patch replaces cgroup_rstat_mutex with a spinlock and adds a
irq-safe flush function - cgroup_rstat_flush_irqsafe(). Explicit
yield handling is added to the flush path so that other flush
functions can yield to other threads and flushers.
Signed-off-by: Tejun Heo <tj@kernel.org>
cgroup_rstat is being generalized so that controllers can use it too.
This patch factors out and exposes the following interface functions.
* cgroup_rstat_updated(): Renamed from cgroup_rstat_cpu_updated() for
consistency.
* cgroup_rstat_flush_hold/release(): Factored out from base stat
implementation.
* cgroup_rstat_flush(): Verbatim expose.
While at it, drop assert on cgroup_rstat_mutex in
cgroup_base_stat_flush() as it crosses layers and make a minor comment
update.
v2: Added EXPORT_SYMBOL_GPL(cgroup_rstat_updated) to fix a build bug.
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, rstat.c has rstat and base stat implementations intermixed.
Collect base stat implementation at the end of the file. Also,
reorder the prototypes.
This patch doesn't make any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Base resource stat accounts universial (not specific to any
controller) resource consumptions on top of rstat. Currently, its
implementation is intermixed with rstat implementation making the code
confusing to follow.
This patch clarifies the distintion by doing the followings.
* Encapsulate base resource stat counters, currently only cputime, in
struct cgroup_base_stat.
* Move prev_cputime into struct cgroup and initialize it with cgroup.
* Rename the related functions so that they start with cgroup_base_stat.
* Prefix the related variables and field names with b.
This patch doesn't make any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
stat is too generic a name and ends up causing subtle confusions.
It'll be made generic so that controllers can plug into it, which will
make the problem worse. Let's rename it to something more specific -
cgroup_rstat for cgroup recursive stat.
This patch does the following renames. No other changes.
* cpu_stat -> rstat_cpu
* stat -> rstat
* ?cstat -> ?rstatc
Note that the renames are selective. The unrenamed are the ones which
implement basic resource statistics on top of rstat. This will be
further cleaned up in the following patches.
Signed-off-by: Tejun Heo <tj@kernel.org>
stat is too generic a name and ends up causing subtle confusions.
It'll be made generic so that controllers can plug into it, which will
make the problem worse. Let's rename it to something more specific -
cgroup_rstat for cgroup recursive stat.
First, rename kernel/cgroup/stat.c to kernel/cgroup/rstat.c. No
content changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
".events" files generate file modified event to notify userland of
possible new events. Some of the events can be quite bursty
(e.g. memory high event) and generating notification each time is
costly and pointless.
This patch implements a event rate limit mechanism. If a new
notification is requested before 10ms has passed since the previous
notification, the new notification is delayed till then.
As this only delays from the second notification on in a given close
cluster of notifications, userland reactions to notifications
shouldn't be delayed at all in most cases while avoiding notification
storms.
Signed-off-by: Tejun Heo <tj@kernel.org>
The "cgroup." core interface files bypass the usual interface removal
path and get removed recursively along with the cgroup itself. While
this works now, the subtle discrepancy gets in the way of implementing
common mechanisms.
This patch updates cgroup core interface file handling so that it's
consistent with controller interface files. When added, the css is
marked CSS_VISIBLE and they're explicitly removed before the cgroup is
destroyed.
This doesn't cause user-visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Adding gpl_compatible flag to struct bpf_prog_info
so it can be dumped via bpf_prog_get_info_by_fd and
displayed via bpftool progs dump.
Alexei noticed 4-byte hole in struct bpf_prog_info,
so we put the u32 flags field in there, and we can
keep adding bit fields in there without breaking
user space.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
There is the SPDX license identifier now in the irq simulator. Remove the
license boilerplate.
While at it: update the copyright notice, since I did some changes in 2018.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20180426200747.8344-1-brgl@bgdev.pl
Caller of uprobe_register is required to keep the inode and containing
mount point referenced.
There was misuse of igrab() in uprobes.c and trace_uprobe.c. This is
because igrab() will not prevent umount of the containing mount point.
To fix this, we added path to struct trace_uprobe, which keeps the inode
and containing mount reference.
For uprobes.c, it is not necessary to call igrab() in uprobe_register(),
as the caller is required to keep the inode reference. The igrab() is
removed and comments on this requirement is added to uprobe_register().
Link: http://lkml.kernel.org/r/CAELBmZB2XX=qEOLAdvGG4cPx4GEntcSnWQquJLUK1ongRj35cA@mail.gmail.com
Link: http://lkml.kernel.org/r/20180423172135.4050588-2-songliubraving@fb.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Howard McLauchlan <hmclauchlan@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As Miklos reported and suggested:
This pattern repeats two times in trace_uprobe.c and in
kernel/events/core.c as well:
ret = kern_path(filename, LOOKUP_FOLLOW, &path);
if (ret)
goto fail_address_parse;
inode = igrab(d_inode(path.dentry));
path_put(&path);
And it's wrong. You can only hold a reference to the inode if you
have an active ref to the superblock as well (which is normally
through path.mnt) or holding s_umount.
This way unmounting the containing filesystem while the tracepoint is
active will give you the "VFS: Busy inodes after unmount..." message
and a crash when the inode is finally put.
Solution: store path instead of inode.
This patch fixes two instances in trace_uprobe.c. struct path is added to
struct trace_uprobe to keep the inode and containing mount point
referenced.
Link: http://lkml.kernel.org/r/20180423172135.4050588-1-songliubraving@fb.com
Fixes: f3f096cfed ("tracing: Provide trace events interface for uprobes")
Fixes: 33ea4b2427 ("perf/core: Implement the 'perf_uprobe' PMU")
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Howard McLauchlan <hmclauchlan@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Reported-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Revert commits
92af4dcb4e ("tracing: Unify the "boot" and "mono" tracing clocks")
127bfa5f43 ("hrtimer: Unify MONOTONIC and BOOTTIME clock behavior")
7250a4047a ("posix-timers: Unify MONOTONIC and BOOTTIME clock behavior")
d6c7270e91 ("timekeeping: Remove boot time specific code")
f2d6fdbfd2 ("Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior")
d6ed449afd ("timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clock")
72199320d4 ("timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clock")
As stated in the pull request for the unification of CLOCK_MONOTONIC and
CLOCK_BOOTTIME, it was clear that we might have to revert the change.
As reported by several folks systemd and other applications rely on the
documented behaviour of CLOCK_MONOTONIC on Linux and break with the above
changes. After resume daemons time out and other timeout related issues are
observed. Rafael compiled this list:
* systemd kills daemons on resume, after >WatchdogSec seconds
of suspending (Genki Sky). [Verified that that's because systemd uses
CLOCK_MONOTONIC and expects it to not include the suspend time.]
* systemd-journald misbehaves after resume:
systemd-journald[7266]: File /var/log/journal/016627c3c4784cd4812d4b7e96a34226/system.journal
corrupted or uncleanly shut down, renaming and replacing.
(Mike Galbraith).
* NetworkManager reports "networking disabled" and networking is broken
after resume 50% of the time (Pavel). [May be because of systemd.]
* MATE desktop dims the display and starts the screensaver right after
system resume (Pavel).
* Full system hang during resume (me). [May be due to systemd or NM or both.]
That happens on debian and open suse systems.
It's sad, that these problems were neither catched in -next nor by those
folks who expressed interest in this change.
Reported-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Reported-by: Genki Sky <sky@genki.is>,
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Kaike reported that in tests rdma hrtimers occasionaly stopped working. He
did great debugging, which provided enough context to decode the problem.
CPU 3 CPU 2
idle
start sched_timer expires = 712171000000
queue->next = sched_timer
start rdmavt timer. expires = 712172915662
lock(baseof(CPU3))
tick_nohz_stop_tick()
tick = 716767000000 timerqueue_add(tmr)
hrtimer_set_expires(sched_timer, tick);
sched_timer->expires = 716767000000 <---- FAIL
if (tmr->expires < queue->next->expires)
hrtimer_start(sched_timer) queue->next = tmr;
lock(baseof(CPU3))
unlock(baseof(CPU3))
timerqueue_remove()
timerqueue_add()
ts->sched_timer is queued and queue->next is pointing to it, but then
ts->sched_timer.expires is modified.
This not only corrupts the ordering of the timerqueue RB tree, it also
makes CPU2 see the new expiry time of timerqueue->next->expires when
checking whether timerqueue->next needs to be updated. So CPU2 sees that
the rdma timer is earlier than timerqueue->next and sets the rdma timer as
new next.
Depending on whether it had also seen the new time at RB tree enqueue, it
might have queued the rdma timer at the wrong place and then after removing
the sched_timer the RB tree is completely hosed.
The problem was introduced with a commit which tried to solve inconsistency
between the hrtimer in the tick_sched data and the underlying hardware
clockevent. It split out hrtimer_set_expires() to store the new tick time
in both the NOHZ and the NOHZ + HIGHRES case, but missed the fact that in
the NOHZ + HIGHRES case the hrtimer might still be queued.
Use hrtimer_start(timer, tick...) for the NOHZ + HIGHRES case which sets
timer->expires after canceling the timer and move the hrtimer_set_expires()
invocation into the NOHZ only code path which is not affected as it merily
uses the hrtimer as next event storage so code pathes can be shared with
the NOHZ + HIGHRES case.
Fixes: d4af6d933c ("nohz: Fix spurious warning when hrtimer and clockevent get out of sync")
Reported-by: "Wan Kaike" <kaike.wan@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Cc: "Marciniszyn Mike" <mike.marciniszyn@intel.com>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: linux-rdma@vger.kernel.org
Cc: "Dalessandro Dennis" <dennis.dalessandro@intel.com>
Cc: "Fleck John" <john.fleck@intel.com>
Cc: stable@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Weiny Ira" <ira.weiny@intel.com>
Cc: "linux-rdma@vger.kernel.org"
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1804241637390.1679@nanos.tec.linutronix.de
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1804242119210.1597@nanos.tec.linutronix.de
Daniel Borkmann says:
====================
pull-request: bpf 2018-04-25
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix to clear the percpu metadata_dst that could otherwise carry
stale ip_tunnel_info, from William.
2) Fix that reduces the number of passes in x64 JIT with regards to
dead code sanitation to avoid risk of prog rejection, from Gianluca.
3) Several fixes of sockmap programs, besides others, fixing a double
page_put() in error path, missing refcount hold for pinned sockmap,
adding required -target bpf for clang in sample Makefile, from John.
4) Fix to disable preemption in __BPF_PROG_RUN_ARRAY() paths, from Roman.
5) Fix tools/bpf/ Makefile with regards to a lex/yacc build error
seen on older gcc-5, from John.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
With the recent architecture cleanups these si_codes are always
defined so there is no need to test for them.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
After the last round of cleanups to siginfo.h SEGV_BNDERR is defined
on all architectures so testing to see if it is defined is unnecessary.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
After more experience with the cases where no one the si_code of 0
is used both as a signal specific si_code, and as SI_USER it appears
that no one cares about the signal specific si_code case and the
good solution is to just fix the architectures by using
a different si_code.
In none of the conversations has anyone even suggested that
anything depends on the signal specific redefinition of SI_USER.
There are at least test cases that care when si_code as 0 does
not work as si_user.
So make things simple and keep the generic code from introducing
problems by removing the special casing of TRAP_FIXME and FPE_FIXME.
This will ensure the generic case of sending a signal with
kill will always set SI_USER and work.
The architecture specific, and signal specific overloads that
set si_code to 0 will now have problems with signalfd and
the 32bit compat versions of siginfo copying. At least
until they are fixed.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Now that every instance of struct siginfo is now initialized it is no
longer necessary to copy struct siginfo piece by piece to userspace
but instead the entire structure can be copied.
As well as making the code simpler and more efficient this means that
copy_sinfo_to_user no longer cares which union member of struct
siginfo is in use.
In practice this means that all 32bit architectures that define
FPE_FIXME will handle properly send SI_USER when kill(SIGFPE) is sent.
While still performing their historic architectural brokenness when 0
is used a floating pointer signal. This matches the current behavior
of 64bit architectures that define FPE_FIXME who get lucky and an
overloaded SI_USER has continuted to work through copy_siginfo_to_user
because the 8 byte si_addr occupies the same bytes in struct siginfo
as the 4 byte si_pid and the 4 byte si_uid.
Problematic architectures still need to fix their ABI so that signalfd
and 32bit compat code will work properly.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
It's been missing for a while but no one is touching that up. Fix it.
Link: http://lkml.kernel.org/r/20180315060639.9578-1-peterx@redhat.com
CC: Ingo Molnar <mingo@kernel.org>
Cc:stable@vger.kernel.org
Fixes: 7b2c862501 ("tracing: Add NMI tracing in hwlat detector")
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
File /sys/kernel/debug/kprobes/blacklist displays random addresses:
[root@s8360046 linux]# cat /sys/kernel/debug/kprobes/blacklist
0x0000000047149a90-0x00000000bfcb099a print_type_x8
....
This breaks 'perf probe' which uses the blacklist file to prohibit
probes on certain functions by checking the address range.
Fix this by printing the correct (unhashed) address.
The file mode is read all but this is not an issue as the file
hierarchy points out:
# ls -ld /sys/ /sys/kernel/ /sys/kernel/debug/ /sys/kernel/debug/kprobes/
/sys/kernel/debug/kprobes/blacklist
dr-xr-xr-x 12 root root 0 Apr 19 07:56 /sys/
drwxr-xr-x 8 root root 0 Apr 19 07:56 /sys/kernel/
drwx------ 16 root root 0 Apr 19 06:56 /sys/kernel/debug/
drwxr-xr-x 2 root root 0 Apr 19 06:56 /sys/kernel/debug/kprobes/
-r--r--r-- 1 root root 0 Apr 19 06:56 /sys/kernel/debug/kprobes/blacklist
Everything in and below /sys/kernel/debug is rwx to root only,
no group or others have access.
Background:
Directory /sys/kernel/debug/kprobes is created by debugfs_create_dir()
which sets the mode bits to rwxr-xr-x. Maybe change that to use the
parent's directory mode bits instead?
Link: http://lkml.kernel.org/r/20180419105556.86664-1-tmricht@linux.ibm.com
Fixes: ad67b74d24 ("printk: hash addresses printed with %p")
Cc: stable@vger.kernel.org
Cc: <stable@vger.kernel.org> # v4.15+
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S Miller <davem@davemloft.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: acme@kernel.org
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Kernel is crashing when user tries to record 'ftrace:function' event
with empty filter:
# perf record -e ftrace:function --filter="" ls
# dmesg
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
Oops: 0000 [#1] SMP PTI
...
RIP: 0010:ftrace_profile_set_filter+0x14b/0x2d0
RSP: 0018:ffffa4a7c0da7d20 EFLAGS: 00010246
RAX: ffffa4a7c0da7d64 RBX: 0000000000000000 RCX: 0000000000000006
RDX: 0000000000000000 RSI: 0000000000000092 RDI: ffff8c48ffc968f0
...
Call Trace:
_perf_ioctl+0x54a/0x6b0
? rcu_all_qs+0x5/0x30
...
After patch:
# perf record -e ftrace:function --filter="" ls
failed to set filter "" on event ftrace:function with 22 (Invalid argument)
Also, if user tries to echo "" > filter, it used to throw an error.
This behavior got changed by commit 80765597bc ("tracing: Rewrite
filter logic to be simpler and faster"). This patch restores the
behavior as a side effect:
Before patch:
# echo "" > filter
#
After patch:
# echo "" > filter
bash: echo: write error: Invalid argument
#
Link: http://lkml.kernel.org/r/20180420150758.19787-1-ravi.bangoria@linux.ibm.com
Fixes: 80765597bc ("tracing: Rewrite filter logic to be simpler and faster")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
We wake up klogd very late - only when current console_sem owner
is done pushing pending kernel messages to the serial/net consoles.
In some cases this results in lost syslog messages, because kernel
log buffer is a circular buffer and if we don't wakeup syslog long
enough there are chances that logbuf simply will wrap around.
The patch moves the klogd wake up call to vprintk_emit(), which is
the only legit way for a kernel message to appear in the logbuf,
right after the attempt to handle consoles. As a result, klogd
will get waken either after flushing the new message to consoles
or immediately when consoles are still busy with older messages.
Link: http://lkml.kernel.org/r/20180419014250.5692-1-sergey.senozhatsky@gmail.com
To: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Pull networking fixes from David Miller:
1) Fix rtnl deadlock in ipvs, from Julian Anastasov.
2) s390 qeth fixes from Julian Wiedmann (control IO completion stalls,
bad MAC address update sequence, request side races on command IO
timeouts).
3) Handle seq_file overflow properly in l2tp, from Guillaume Nault.
4) Fix VLAN priority mappings in cpsw driver, from Ivan Khoronzhuk.
5) Packet scheduler ife action fixes (malformed TLV lengths, etc.) from
Alexander Aring.
6) Fix out of bounds access in tcp md5 option parser, from Jann Horn.
7) Missing netlink attribute policies in rtm_ipv6_policy table, from
Eric Dumazet.
8) Missing socket address length checks in l2tp and pppoe connect, from
Guillaume Nault.
9) Fix netconsole over team and bonding, from Xin Long.
10) Fix race with AF_PACKET socket state bitfields, from Willem de
Bruijn.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (51 commits)
ice: Fix insufficient memory issue in ice_aq_manage_mac_read
sfc: ARFS filter IDs
net: ethtool: Add missing kernel doc for FEC parameters
packet: fix bitfield update race
ice: Do not check INTEVENT bit for OICR interrupts
ice: Fix incorrect comment for action type
ice: Fix initialization for num_nodes_added
igb: Fix the transmission mode of queue 0 for Qav mode
ixgbevf: ensure xdp_ring resources are free'd on error exit
team: fix netconsole setup over team
amd-xgbe: Only use the SFP supported transceiver signals
amd-xgbe: Improve KR auto-negotiation and training
amd-xgbe: Add pre/post auto-negotiation phy hooks
pppoe: check sockaddr length in pppoe_connect()
l2tp: check sockaddr length in pppol2tp_connect()
net: phy: marvell: clear wol event before setting it
ipv6: add RTA_TABLE and RTA_PREFSRC to rtm_ipv6_policy
bonding: do not set slave_dev npinfo before slave_enable_netpoll in bond_enslave
tcp: don't read out-of-bounds opsize
ibmvnic: Clean actual number of RX or TX pools
...
Helpers that expect ARG_PTR_TO_MAP_KEY and ARG_PTR_TO_MAP_VALUE can only
access stack and packet memory. Allow these helpers to directly access
map values by passing registers of type PTR_TO_MAP_VALUE.
This change removes the need for an extra copy to the stack when using a
map value to perform a second map lookup, as in the following:
struct bpf_map_def SEC("maps") infobyreq = {
.type = BPF_MAP_TYPE_HASHMAP,
.key_size = sizeof(struct request *),
.value_size = sizeof(struct info_t),
.max_entries = 1024,
};
struct bpf_map_def SEC("maps") counts = {
.type = BPF_MAP_TYPE_HASHMAP,
.key_size = sizeof(struct info_t),
.value_size = sizeof(u64),
.max_entries = 1024,
};
SEC("kprobe/blk_account_io_start")
int bpf_blk_account_io_start(struct pt_regs *ctx)
{
struct info_t *info = bpf_map_lookup_elem(&infobyreq, &ctx->di);
u64 *count = bpf_map_lookup_elem(&counts, info);
(*count)++;
}
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Current implementation of auditing by executable name only implements
the 'equal' operator. This patch extends it to also support the 'not
equal' operator.
See: https://github.com/linux-audit/audit-kernel/issues/53
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
In the case where the socket memory boundary is hit the redirect
path returns an ENOMEM error. However, before checking for this
condition the redirect scatterlist buffer is setup with a valid
page and length. This is never unwound so when the buffers are
released latter in the error path we do a put_page() and clear
the scatterlist fields. But, because the initial error happens
before completing the scatterlist buffer we end up with both the
original buffer and the redirect buffer pointing to the same page
resulting in duplicate put_page() calls.
To fix this simply move the initial configuration of the redirect
scatterlist buffer below the sock memory check.
Found this while running TCP_STREAM test with netperf using Cilium.
Fixes: fa246693a1 ("bpf: sockmap, BPF_F_INGRESS flag for BPF_SK_SKB_STREAM_VERDICT")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
In the recvmsg handler we need to add a wait event to support the
blocking use cases. Without this we return zero and may confuse
user applications. In the wait event any data received on the
sk either via sk_receive_queue or the psock ingress list will
wake up the sock.
Fixes: fa246693a1 ("bpf: sockmap, BPF_F_INGRESS flag for BPF_SK_SKB_STREAM_VERDICT")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Relying on map_release hook to decrement the reference counts when a
map is removed only works if the map is not being pinned. In the
pinned case the ref is decremented immediately and the BPF programs
released. After this BPF programs may not be in-use which is not
what the user would expect.
This patch moves the release logic into bpf_map_put_uref() and brings
sockmap in-line with how a similar case is handled in prog array maps.
Fixes: 3d9e952697 ("bpf: sockmap, fix leaking maps with attached but not detached progs")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch cleans up btf.h in uapi:
1) Rename "name" to "name_off" to better reflect it is an offset to the
string section instead of a char array.
2) Remove unused value BTF_FLAGS_COMPR and BTF_MAGIC_SWAP
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Daniel Borkmann says:
====================
pull-request: bpf 2018-04-21
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a deadlock between mm->mmap_sem and bpf_event_mutex when
one task is detaching a BPF prog via perf_event_detach_bpf_prog()
and another one dumping through bpf_prog_array_copy_info(). For
the latter we move the copy_to_user() out of the bpf_event_mutex
lock to fix it, from Yonghong.
2) Fix test_sock and test_sock_addr.sh failures. The former was
hitting rlimit issues and the latter required ping to specify
the address family, from Yonghong.
3) Remove a dead check in sockmap's sock_map_alloc(), from Jann.
4) Add generated files to BPF kselftests gitignore that were previously
missed, from Anders.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull timer fixes from Thomas Gleixner:
"A small set of timer fixes:
- Evaluate the -ETIME condition correctly in the imx tpm driver
- Fix the evaluation order of a condition in posix cpu timers
- Use pr_cont() in the clockevents code to prevent ugly message
splitting
- Remove __current_kernel_time() which is now unused to prevent that
new users show up.
- Remove a stale forward declaration"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/imx-tpm: Correct -ETIME return condition check
posix-cpu-timers: Ensure set_process_cpu_timer is always evaluated
timekeeping: Remove __current_kernel_time()
timers: Remove stale struct tvec_base forward declaration
clockevents: Fix kernel messages split across multiple lines
Pull perf fixes from Thomas Gleixner:
"A larger set of updates for perf.
Kernel:
- Handle the SBOX uncore monitoring correctly on Broadwell CPUs which
do not have SBOX.
- Store context switch out type in PERF_RECORD_SWITCH[_CPU_WIDE]. The
percentage of preempting and non-preempting context switches help
understanding the nature of workloads (CPU or IO bound) that are
running on a machine. This adds the kernel facility and userspace
changes needed to show this information in 'perf script' and 'perf
report -D' (Alexey Budankov)
- Remove a WARN_ON() in the trace/kprobes code which is pointless
because the return error code is already telling the caller what's
wrong.
- Revert a fugly workaround for clang BPF targets.
- Fix sample_max_stack maximum check and do not proceed when an error
has been detect, return them to avoid misidentifying errors (Jiri
Olsa)
- Add SPDX idenitifiers and get rid of GPL boilderplate.
Tools:
- Synchronize kernel ABI headers, v4.17-rc1 (Ingo Molnar)
- Support MAP_FIXED_NOREPLACE, noticed when updating the
tools/include/ copies (Arnaldo Carvalho de Melo)
- Add '\n' at the end of parse-options error messages (Ravi Bangoria)
- Add s390 support for detailed/verbose PMU event description (Thomas
Richter)
- perf annotate fixes and improvements:
* Allow showing offsets in more than just jump targets, use the
new 'O' hotkey in the TUI, config ~/.perfconfig
annotate.offset_level for it and for --stdio2 (Arnaldo Carvalho
de Melo)
* Use the resolved variable names from objdump disassembled lines
to make them more compact, just like was already done for some
instructions, like "mov", this eventually will be done more
generally, but lets now add some more to the existing mechanism
(Arnaldo Carvalho de Melo)
- perf record fixes:
* Change warning for missing topology sysfs entry to debug, as not
all architectures have those files, s390 being one of those
(Thomas Richter)
* Remove old error messages about things that unlikely to be the
root cause in modern systems (Andi Kleen)
- perf sched fixes:
* Fix -g/--call-graph documentation (Takuya Yamamoto)
- perf stat:
* Enable 1ms interval for printing event counters values in
(Alexey Budankov)
- perf test fixes:
* Run dwarf unwind on arm32 (Kim Phillips)
* Remove unused ptrace.h include from LLVM test, sidesteping older
clang's lack of support for some asm constructs (Arnaldo
Carvalho de Melo)
* Fixup BPF test using epoll_pwait syscall function probe, to cope
with the syscall routines renames performed in this development
cycle (Arnaldo Carvalho de Melo)
- perf version fixes:
* Do not print info about HAVE_LIBAUDIT_SUPPORT in 'perf version
--build-options' when HAVE_SYSCALL_TABLE_SUPPORT is true, as
libaudit won't be used in that case, print info about
syscall_table support instead (Jin Yao)
- Build system fixes:
* Use HAVE_..._SUPPORT used consistently (Jin Yao)
* Restore READ_ONCE() C++ compatibility in tools/include (Mark
Rutland)
* Give hints about package names needed to build jvmti (Arnaldo
Carvalho de Melo)"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
perf/x86/intel/uncore: Fix SBOX support for Broadwell CPUs
perf/x86/intel/uncore: Revert "Remove SBOX support for Broadwell server"
coresight: Move to SPDX identifier
perf test BPF: Fixup BPF test using epoll_pwait syscall function probe
perf tests mmap: Show which tracepoint is failing
perf tools: Add '\n' at the end of parse-options error messages
perf record: Remove suggestion to enable APIC
perf record: Remove misleading error suggestion
perf hists browser: Clarify top/report browser help
perf mem: Allow all record/report options
perf trace: Support MAP_FIXED_NOREPLACE
perf: Remove superfluous allocation error check
perf: Fix sample_max_stack maximum check
perf: Return proper values for user stack errors
perf list: Add s390 support for detailed/verbose PMU event description
perf script: Extend misc field decoding with switch out event type
perf report: Extend raw dump (-D) out with switch out event type
perf/core: Store context switch out type in PERF_RECORD_SWITCH[_CPU_WIDE]
tools/headers: Synchronize kernel ABI headers, v4.17-rc1
trace_kprobe: Remove warning message "Could not insert probe at..."
...
One of the classes of kernel stack content leaks[1] is exposing the
contents of prior heap or stack contents when a new process stack is
allocated. Normally, those stacks are not zeroed, and the old contents
remain in place. In the face of stack content exposure flaws, those
contents can leak to userspace.
Fixing this will make the kernel no longer vulnerable to these flaws, as
the stack will be wiped each time a stack is assigned to a new process.
There's not a meaningful change in runtime performance; it almost looks
like it provides a benefit.
Performing back-to-back kernel builds before:
Run times: 157.86 157.09 158.90 160.94 160.80
Mean: 159.12
Std Dev: 1.54
and after:
Run times: 159.31 157.34 156.71 158.15 160.81
Mean: 158.46
Std Dev: 1.46
Instead of making this a build or runtime config, Andy Lutomirski
recommended this just be enabled by default.
[1] A noisy search for many kinds of stack content leaks can be seen here:
https://cve.mitre.org/cgi-bin/cvekey.cgi?keyword=linux+kernel+stack+leak
I did some more with perf and cycle counts on running 100,000 execs of
/bin/true.
before:
Cycles: 218858861551 218853036130 214727610969 227656844122 224980542841
Mean: 221015379122.60
Std Dev: 4662486552.47
after:
Cycles: 213868945060 213119275204 211820169456 224426673259 225489986348
Mean: 217745009865.40
Std Dev: 5935559279.99
It continues to look like it's faster, though the deviation is rather
wide, but I'm not sure what I could do that would be less noisy. I'm
open to ideas!
Link: http://lkml.kernel.org/r/20180221021659.GA37073@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove dead code that bails on `attr->value_size > KMALLOC_MAX_SIZE` - the
previous check already bails on `attr->value_size != 4`.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tie syscall information to FEATURE_CHANGE calls since it is a result of
user action.
See: https://github.com/linux-audit/audit-kernel/issues/80
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: 80-char fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Pull livepatching fix from Jiri Kosina:
"Shadow variable API list_head initialization fix from Petr Mladek"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: Allow to call a custom callback when freeing shadow variables
livepatch: Initialize shadow variables safely by a custom callback
This patch adds pretty print support to the basic arraymap.
Support for other bpf maps can be added later.
This patch adds new attrs to the BPF_MAP_CREATE command to allow
specifying the btf_fd, btf_key_id and btf_value_id. The
BPF_MAP_CREATE can then associate the btf to the map if
the creating map supports BTF.
A BTF supported map needs to implement two new map ops,
map_seq_show_elem() and map_check_btf(). This patch has
implemented these new map ops for the basic arraymap.
It also adds file_operations, bpffs_map_fops, to the pinned
map such that the pinned map can be opened and read.
After that, the user has an intuitive way to do
"cat bpffs/pathto/a-pinned-map" instead of getting
an error.
bpffs_map_fops should not be extended further to support
other operations. Other operations (e.g. write/key-lookup...)
should be realized by the userspace tools (e.g. bpftool) through
the BPF_OBJ_GET_INFO_BY_FD, map's lookup/update interface...etc.
Follow up patches will allow the userspace to obtain
the BTF from a map-fd.
Here is a sample output when reading a pinned arraymap
with the following map's value:
struct map_value {
int count_a;
int count_b;
};
cat /sys/fs/bpf/pinned_array_map:
0: {1,2}
1: {3,4}
2: {5,6}
...
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch adds BPF_OBJ_GET_INFO_BY_FD support to BTF fd.
The original BTF data, which was used to create the BTF fd during
the earlier BPF_BTF_LOAD call, will be returned.
The userspace is expected to allocate buffer
to info.info and the buffer size is set to info.info_len before
calling BPF_OBJ_GET_INFO_BY_FD.
The original BTF data is copied to the userspace buffer (info.info).
Only upto the user's specified info.info_len will be copied.
The original BTF data size is set to info.info_len. The userspace
needs to check if it is bigger than its allocated buffer size.
If it is, the userspace should realloc with the kernel-returned
info.info_len and call the BPF_OBJ_GET_INFO_BY_FD again.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch adds a BPF_BTF_LOAD command which
1) loads and verifies the BTF (implemented in earlier patches)
2) returns a BTF fd to userspace. In the next patch, the
BTF fd can be specified during BPF_MAP_CREATE.
It currently limits to CAP_SYS_ADMIN.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch adds pretty print capability for data with BTF type info.
The current usage is to allow pretty print for a BPF map.
The next few patches will allow a read() on a pinned map with BTF
type info for its key and value.
This patch uses the seq_printf() infra.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch checks a few things of struct's members:
1) It has a valid size (e.g. a "const void" is invalid)
2) A member's size (+ its member's offset) does not exceed
the containing struct's size.
3) The member's offset satisfies the alignment requirement
The above can only be done after the needs_resolve member's type
is resolved. Hence, the above is done together in
btf_struct_resolve().
Each possible member's type (e.g. int, enum, modifier...) implements
the check_member() ops which will be called from btf_struct_resolve().
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
After collecting all btf_type in the first pass in an earlier patch,
the second pass (in this patch) can validate the reference types
(e.g. the referring type does exist and it does not refer to itself).
While checking the reference type, it also gathers other information (e.g.
the size of an array). This info will be useful in checking the
struct's members in a later patch. They will also be useful in doing
pretty print later.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch introduces BPF type Format (BTF).
BTF (BPF Type Format) is the meta data format which describes
the data types of BPF program/map. Hence, it basically focus
on the C programming language which the modern BPF is primary
using. The first use case is to provide a generic pretty print
capability for a BPF map.
BTF has its root from CTF (Compact C-Type format). To simplify
the handling of BTF data, BTF removes the differences between
small and big type/struct-member. Hence, BTF consistently uses u32
instead of supporting both "one u16" and "two u32 (+padding)" in
describing type and struct-member.
It also raises the number of types (and functions) limit
from 0x7fff to 0x7fffffff.
Due to the above changes, the format is not compatible to CTF.
Hence, BTF starts with a new BTF_MAGIC and version number.
This patch does the first verification pass to the BTF. The first
pass checks:
1. meta-data size (e.g. It does not go beyond the total btf's size)
2. name_offset is valid
3. Each BTF_KIND (e.g. int, enum, struct....) does its
own check of its meta-data.
Some other checks, like checking a struct's member is referring
to a valid type, can only be done in the second pass. The second
verification pass will be implemented in the next patch.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Change over clock_nanosleep syscalls to use y2038 safe
__kernel_timespec times. This will enable changing over
of these syscalls to use new y2038 safe syscalls when
the architectures define the CONFIG_64BIT_TIME.
Note that nanosleep syscall is deprecated and does not have a
plan for making it y2038 safe. But, the syscall should work as
before on 64 bit machines and on 32 bit machines, the syscall
works correctly until y2038 as before using the existing compat
syscall version. There is no new syscall for supporting 64 bit
time_t on 32 bit architectures.
Cc: linux-api@vger.kernel.org
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Change over clock_settime, clock_gettime and clock_getres
syscalls to use __kernel_timespec times. This will enable
changing over of these syscalls to use new y2038 safe syscalls
when the architectures define the CONFIG_64BIT_TIME.
Cc: linux-api@vger.kernel.org
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
get/put_timespec64() interfaces will eventually be used for
conversions between the new y2038 safe struct __kernel_timespec
and struct timespec64.
The new y2038 safe syscalls have a common entry for native
and compat interfaces.
On compat interfaces, the high order bits of nanoseconds
should be zeroed out. This is because the application code
or the libc do not guarantee zeroing of these. If used without
zeroing, kernel might be at risk of using timespec values
incorrectly.
Note that clearing of bits is dependent on CONFIG_64BIT_TIME
for now. This is until COMPAT_USE_64BIT_TIME has been handled
correctly. x86 will be the first architecture that will use the
CONFIG_64BIT_TIME.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
clock_gettime, clock_settime, clock_getres and clock_nanosleep
compat syscalls are also repurposed to provide backward compatibility
to support 32 bit time_t on 32 bit systems.
Note that nanosleep compat syscall will also be treated the same way
as the above syscalls as it shares common handler functions with
clock_nanosleep. But, there is no plan to provide y2038 safe solution
for nanosleep.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These functions are used in the repurposed compat syscalls
to provide backward compatibility for using 32 bit time_t
on 32 bit systems.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit a9445e47d8 ("posix-cpu-timers: Make set_process_cpu_timer()
more robust") moved the check into the 'if' statement. Unfortunately,
it did so on the right side of an && which means that it may get short
circuited and never evaluated. This is easily reproduced with:
$ cat loop.c
void main() {
struct rlimit res;
/* set the CPU time limit */
getrlimit(RLIMIT_CPU,&res);
res.rlim_cur = 2;
res.rlim_max = 2;
setrlimit(RLIMIT_CPU,&res);
while (1);
}
Which will hang forever instead of being killed. Fix this by pulling the
evaluation out of the if statement but checking the return value instead.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1568337
Fixes: a9445e47d8 ("posix-cpu-timers: Make set_process_cpu_timer() more robust")
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Cc: "Max R . P . Grossmann" <m@max.pm>
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20180417215742.2521-1-labbott@redhat.com
Reading file /proc/modules shows the correct address:
[root@s35lp76 ~]# cat /proc/modules | egrep '^qeth_l2'
qeth_l2 94208 1 - Live 0x000003ff80401000
and reading file /sys/module/qeth_l2/sections/.text
[root@s35lp76 ~]# cat /sys/module/qeth_l2/sections/.text
0x0000000018ea8363
displays a random address.
This breaks the perf tool which uses this address on s390
to calculate start of .text section in memory.
Fix this by printing the correct (unhashed) address.
Thanks to Jessica Yu for helping on this.
Fixes: ef0010a309 ("vsprintf: don't use 'restricted_pointer()' when not restricting")
Cc: <stable@vger.kernel.org> # v4.15+
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Convert the clockevents driver from old-style printk() to pr_info() and
pr_cont(), to fix split kernel messages like below:
Clockevents: could not switch to one-shot mode:
dummy_timer is not functional.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: https://lkml.kernel.org/r/1522942018-14471-1-git-send-email-geert%2Brenesas@glider.be
Changing API xdp_return_frame() to take struct xdp_frame as argument,
seems like a natural choice. But there are some subtle performance
details here that needs extra care, which is a deliberate choice.
When de-referencing xdp_frame on a remote CPU during DMA-TX
completion, result in the cache-line is change to "Shared"
state. Later when the page is reused for RX, then this xdp_frame
cache-line is written, which change the state to "Modified".
This situation already happens (naturally) for, virtio_net, tun and
cpumap as the xdp_frame pointer is the queued object. In tun and
cpumap, the ptr_ring is used for efficiently transferring cache-lines
(with pointers) between CPUs. Thus, the only option is to
de-referencing xdp_frame.
It is only the ixgbe driver that had an optimization, in which it can
avoid doing the de-reference of xdp_frame. The driver already have
TX-ring queue, which (in case of remote DMA-TX completion) have to be
transferred between CPUs anyhow. In this data area, we stored a
struct xdp_mem_info and a data pointer, which allowed us to avoid
de-referencing xdp_frame.
To compensate for this, a prefetchw is used for telling the cache
coherency protocol about our access pattern. My benchmarks show that
this prefetchw is enough to compensate the ixgbe driver.
V7: Adjust for commit d9314c474d ("i40e: add support for XDP_REDIRECT")
V8: Adjust for commit bd658dda42 ("net/mlx5e: Separate dma base address
and offset in dma_sync call")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The generic xdp_frame format, was inspired by the cpumap own internal
xdp_pkt format. It is now time to convert it over to the generic
xdp_frame format. The cpumap needs one extra field dev_rx.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce an xdp_return_frame API, and convert over cpumap as
the first user, given it have queued XDP frame structure to leverage.
V3: Cleanup and remove C99 style comments, pointed out by Alex Duyck.
V6: Remove comment that id will be added later (Req by Alex Duyck)
V8: Rename enum mem_type to xdp_mem_type (found by kbuild test robot)
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the get_callchain_buffers fails to allocate the buffer it will
decrease the nr_callchain_events right away.
There's no point of checking the allocation error for
nr_callchain_events > 1. Removing that check.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: syzkaller-bugs@googlegroups.com
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/20180415092352.12403-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The syzbot hit KASAN bug in perf_callchain_store having the entry stored
behind the allocated bounds [1].
We miss the sample_max_stack check for the initial event that allocates
callchain buffers. This missing check allows to create an event with
sample_max_stack value bigger than the global sysctl maximum:
# sysctl -a | grep perf_event_max_stack
kernel.perf_event_max_stack = 127
# perf record -vv -C 1 -e cycles/max-stack=256/ kill
...
perf_event_attr:
size 112
...
sample_max_stack 256
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 = 4
Note the '-C 1', which forces perf record to create just single event.
Otherwise it opens event for every cpu, then the sample_max_stack check
fails on the second event and all's fine.
The fix is to run the sample_max_stack check also for the first event
with callchains.
[1] https://marc.info/?l=linux-kernel&m=152352732920874&w=2
Reported-by: syzbot+7c449856228b63ac951e@syzkaller.appspotmail.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: syzkaller-bugs@googlegroups.com
Cc: x86@kernel.org
Fixes: 97c79a38cd ("perf core: Per event callchain limit")
Link: http://lkml.kernel.org/r/20180415092352.12403-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Return immediately when we find issue in the user stack checks. The
error value could get overwritten by following check for
PERF_SAMPLE_REGS_INTR.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: syzkaller-bugs@googlegroups.com
Cc: x86@kernel.org
Fixes: 60e2364e60 ("perf: Add ability to sample machine state on interrupt")
Link: http://lkml.kernel.org/r/20180415092352.12403-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Store preempting context switch out event into Perf trace as a part of
PERF_RECORD_SWITCH[_CPU_WIDE] record.
Percentage of preempting and non-preempting context switches help
understanding the nature of workloads (CPU or IO bound) that are running
on a machine;
The event is treated as preemption one when task->state value of the
thread being switched out is TASK_RUNNING. Event type encoding is
implemented using PERF_RECORD_MISC_SWITCH_OUT_PREEMPT bit;
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/9ff84e83-a0ca-dd82-a6d0-cb951689be74@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We might need to do some actions before the shadow variable is freed.
For example, we might need to remove it from a list or free some data
that it points to.
This is already possible now. The user can get the shadow variable
by klp_shadow_get(), do the necessary actions, and then call
klp_shadow_free().
This patch allows to do it a more elegant way. The user could implement
the needed actions in a callback that is passed to klp_shadow_free()
as a parameter. The callback usually does reverse operations to
the constructor callback that can be called by klp_shadow_*alloc().
It is especially useful for klp_shadow_free_all(). There we need to do
these extra actions for each found shadow variable with the given ID.
Note that the memory used by the shadow variable itself is still released
later by rcu callback. It is needed to protect internal structures that
keep all shadow variables. But the destructor is called immediately.
The shadow variable must not be access anyway after klp_shadow_free()
is called. The user is responsible to protect this any suitable way.
Be aware that the destructor is called under klp_shadow_lock. It is
the same as for the contructor in klp_shadow_alloc().
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The existing API allows to pass a sample data to initialize the shadow
data. It works well when the data are position independent. But it fails
miserably when we need to set a pointer to the shadow structure itself.
Unfortunately, we might need to initialize the pointer surprisingly
often because of struct list_head. It is even worse because the list
might be hidden in other common structures, for example, struct mutex,
struct wait_queue_head.
For example, this was needed to fix races in ALSA sequencer. It required
to add mutex into struct snd_seq_client. See commit b3defb791b
("ALSA: seq: Make ioctls race-free") and commit d15d662e89
("ALSA: seq: Fix racy pool initializations")
This patch makes the API more safe. A custom constructor function and data
are passed to klp_shadow_*alloc() functions instead of the sample data.
Note that ctor_data are no longer a template for shadow->data. It might
point to any data that might be necessary when the constructor is called.
Also note that the constructor is called under klp_shadow_lock. It is
an internal spin_lock that synchronizes alloc() vs. get() operations,
see klp_shadow_get_or_alloc(). On one hand, this adds a risk of ABBA
deadlocks. On the other hand, it allows to do some operations safely.
For example, we could add the new structure into an existing list.
This must be done only once when the structure is allocated.
Reported-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This warning message is not very helpful, as the return value should
already show information about the error. Also, this message will
spam dmesg if the user space does testing in a loop, like:
for x in {0..5}
do
echo p:xx xx+$x >> /sys/kernel/debug/tracing/kprobe_events
done
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Song Liu <songliubraving@fb.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20180413185513.3626052-1-songliubraving@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The sig_enforce parameter could be always shown to reflect the current
status of signature enforcement. For the case of
CONFIG_MODULE_SIG_FORCE=y, this modification doesn't do anything, since
sig_enforce can only be enabled, and not disabled, even via the kernel
cmdline.
Signed-off-by: Jia Zhang <zhang.jia@linux.alibaba.com>
[jeyu: reworded commit message to provide clarification]
Signed-off-by: Jessica Yu <jeyu@kernel.org>
There were some documentation locations that irda was mentioned, as well
as an old MAINTAINERS entry and the networking sysctl entries. Clean
these all out as this stuff really is finally gone.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull x86 fixes from Thomas Gleixner:
"A set of fixes and updates for x86:
- Address a swiotlb regression which was caused by the recent DMA
rework and made driver fail because dma_direct_supported() returned
false
- Fix a signedness bug in the APIC ID validation which caused invalid
APIC IDs to be detected as valid thereby bloating the CPU possible
space.
- Fix inconsisten config dependcy/select magic for the MFD_CS5535
driver.
- Fix a corruption of the physical address space bits when encryption
has reduced the address space and late cpuinfo updates overwrite
the reduced bit information with the original value.
- Dominiks syscall rework which consolidates the architecture
specific syscall functions so all syscalls can be wrapped with the
same macros. This allows to switch x86/64 to struct pt_regs based
syscalls. Extend the clearing of user space controlled registers in
the entry patch to the lower registers"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Fix signedness bug in APIC ID validity checks
x86/cpu: Prevent cpuinfo_x86::x86_phys_bits adjustment corruption
x86/olpc: Fix inconsistent MFD_CS5535 configuration
swiotlb: Use dma_direct_supported() for swiotlb_ops
syscalls/x86: Adapt syscall_wrapper.h to the new syscall stub naming convention
syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()
syscalls/core, syscalls/x86: Clean up compat syscall stub naming convention
syscalls/core, syscalls/x86: Clean up syscall stub naming convention
syscalls/x86: Extend register clearing on syscall entry to lower registers
syscalls/x86: Unconditionally enable 'struct pt_regs' based syscalls on x86_64
syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32
syscalls/core: Prepare CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y for compat syscalls
syscalls/x86: Use 'struct pt_regs' based syscall calling convention for 64-bit syscalls
syscalls/core: Introduce CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
x86/syscalls: Don't pointlessly reload the system call number
x86/mm: Fix documentation of module mapping range with 4-level paging
x86/cpuid: Switch to 'static const' specifier
Pull scheduler fixes from Thomas Gleixner:
"A few scheduler fixes:
- Prevent a bogus warning vs. runqueue clock update flags in
do_sched_rt_period_timer()
- Simplify the helper functions which handle requests for skipping
the runqueue clock updat.
- Do not unlock the tunables mutex in the error path of the cpu
frequency scheduler utils. Its not held.
- Enforce proper alignement for 'struct util_est' in sched_avg to
prevent a misalignment fault on IA64"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Force proper alignment of 'struct util_est'
sched/core: Simplify helpers for rq clock update skip requests
sched/rt: Fix rq->clock_update_flags < RQCF_ACT_SKIP warning
sched/cpufreq/schedutil: Fix error path mutex unlock
Pull more perf updates from Thomas Gleixner:
"A rather large set of perf updates:
Kernel:
- Fix various initialization issues
- Prevent creating [ku]probes for not CAP_SYS_ADMIN users
Tooling:
- Show only failing syscalls with 'perf trace --failure' (Arnaldo
Carvalho de Melo)
e.g: See what 'openat' syscalls are failing:
# perf trace --failure -e openat
762.323 ( 0.007 ms): VideoCapture/4566 openat(dfd: CWD, filename: /dev/video2) = -1 ENOENT No such file or directory
<SNIP N /dev/videoN open attempts... sigh, where is that improvised camera lid?!? >
790.228 ( 0.008 ms): VideoCapture/4566 openat(dfd: CWD, filename: /dev/video63) = -1 ENOENT No such file or directory
^C#
- Show information about the event (freq, nr_samples, total
period/nr_events) in the annotate --tui and --stdio2 'perf
annotate' output, similar to the first line in the 'perf report
--tui', but just for the samples for a the annotated symbol
(Arnaldo Carvalho de Melo)
- Introduce 'perf version --build-options' to show what features were
linked, aliased as well as a shorter 'perf -vv' (Jin Yao)
- Add a "dso_size" sort order (Kim Phillips)
- Remove redundant ')' in the tracepoint output in 'perf trace'
(Changbin Du)
- Synchronize x86's cpufeatures.h, no effect on toolss (Arnaldo
Carvalho de Melo)
- Show group details on the title line in the annotate browser and
'perf annotate --stdio2' output, so that the per-event columns can
have headers (Arnaldo Carvalho de Melo)
- Fixup vertical line separating metrics from instructions and
cleaning unused lines at the bottom, both in the annotate TUI
browser (Arnaldo Carvalho de Melo)
- Remove duplicated 'samples' in lost samples warning in
'perf report' (Arnaldo Carvalho de Melo)
- Synchronize i915_drm.h, silencing the perf build process,
automagically adding support for the new DRM_I915_QUERY ioctl
(Arnaldo Carvalho de Melo)
- Make auxtrace_queues__add_buffer() allocate struct buffer, from a
patchkit already applied (Adrian Hunter)
- Fix the --stdio2/TUI annotate output to include group details, be
it for a recorded '{a,b,f}' explicit event group or when forcing
group display using 'perf report --group' for a set of events not
recorded as a group (Arnaldo Carvalho de Melo)
- Fix display artifacts in the ui browser (base class for the
annotate and main report/top TUI browser) related to the extra
title lines work (Arnaldo Carvalho de Melo)
- perf auxtrace refactorings, leftovers from a previously partially
processed patchset (Adrian Hunter)
- Fix the builtin clang build (Sandipan Das, Arnaldo Carvalho de
Melo)
- Synchronize i915_drm.h, silencing a perf build warning and in the
process automagically adding support for a new ioctl command
(Arnaldo Carvalho de Melo)
- Fix a strncpy issue in uprobe tracing"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
perf/core: Need CAP_SYS_ADMIN to create k/uprobe with perf_event_open()
tracing/uprobe_event: Fix strncpy corner case
perf/core: Fix perf_uprobe_init()
perf/core: Fix perf_kprobe_init()
perf/core: Fix use-after-free in uprobe_perf_close()
perf tests clang: Fix function name for clang IR test
perf clang: Add support for recent clang versions
perf tools: Fix perf builds with clang support
perf tools: No need to include namespaces.h in util.h
perf hists browser: Remove leftover from row returned from refresh
perf hists browser: Show extra_title_lines in the 'D' debug hotkey
perf auxtrace: Make auxtrace_queues__add_buffer() do CPU filtering
tools headers uapi: Synchronize i915_drm.h
perf report: Remove duplicated 'samples' in lost samples warning
perf ui browser: Fixup cleaning unused lines at the bottom
perf annotate browser: Fixup vertical line separating metrics from instructions
perf annotate: Show group details on the title line
perf auxtrace: Make auxtrace_queues__add_buffer() allocate struct buffer
perf/x86/intel: Move regs->flags EXACT bit init
perf trace: Remove redundant ')'
...
Pull irq affinity fixes from Thomas Gleixner:
- Fix error path handling in the affinity spreading code
- Make affinity spreading smarter to avoid issues on systems which
claim to have hotpluggable CPUs while in fact they can't hotplug
anything.
So instead of trying to spread the vectors (and thereby the
associated device queues) to all possibe CPUs, spread them on all
present CPUs first. If there are left over vectors after that first
step they are spread among the possible, but not present CPUs which
keeps the code backwards compatible for virtual decives and NVME
which allocate a queue per possible CPU, but makes the spreading
smarter for devices which have less queues than possible or present
CPUs.
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/affinity: Spread irq vectors among present CPUs as far as possible
genirq/affinity: Allow irq spreading from a given starting point
genirq/affinity: Move actual irq vector spreading into a helper function
genirq/affinity: Rename *node_to_possible_cpumask as *node_to_cpumask
genirq/affinity: Don't return with empty affinity masks on error
For s390 new kernels are loaded to fixed addresses in memory before they
are booted. With the current code this is a problem as it assumes the
kernel will be loaded to an 'arbitrary' address. In particular,
kexec_locate_mem_hole searches for a large enough memory region and sets
the load address (kexec_bufer->mem) to it.
Luckily there is a simple workaround for this problem. By returning 1
in arch_kexec_walk_mem, kexec_locate_mem_hole is turned off. This
allows the architecture to set kbuf->mem by hand. While the trick works
fine for the kernel it does not for the purgatory as here the
architectures don't have access to its kexec_buffer.
Give architectures access to the purgatories kexec_buffer by changing
kexec_load_purgatory to take a pointer to it. With this change
architectures have access to the buffer and can edit it as they need.
A nice side effect of this change is that we can get rid of the
purgatory_info->purgatory_load_address field. As now the information
stored there can directly be accessed from kbuf->mem.
Link: http://lkml.kernel.org/r/20180321112751.22196-11-prudo@linux.vnet.ibm.com
Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current code uses the sh_offset field in purgatory_info->sechdrs to
store a pointer to the current load address of the section. Depending
whether the section will be loaded or not this is either a pointer into
purgatory_info->purgatory_buf or kexec_purgatory. This is not only a
violation of the ELF standard but also makes the code very hard to
understand as you cannot tell if the memory you are using is read-only
or not.
Remove this misuse and store the offset of the section in
pugaroty_info->purgatory_buf in sh_offset.
Link: http://lkml.kernel.org/r/20180321112751.22196-10-prudo@linux.vnet.ibm.com
Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The main loop currently uses quite a lot of variables to update the
section headers. Some of them are unnecessary. So clean them up a
little.
Link: http://lkml.kernel.org/r/20180321112751.22196-9-prudo@linux.vnet.ibm.com
Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To update the entry point there is an extra loop over all section
headers although this can be done in the main loop. So move it there
and eliminate the extra loop and variable to store the 'entry section
index'.
Also, in the main loop, move the usual case, i.e. non-bss section, out
of the extra if-block.
Link: http://lkml.kernel.org/r/20180321112751.22196-8-prudo@linux.vnet.ibm.com
Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When inspecting __kexec_load_purgatory you find that it has two tasks
1) setting up the kexec_buffer for the new kernel and,
2) setting up pi->sechdrs for the final load address.
The two tasks are independent of each other. To improve readability
split up __kexec_load_purgatory into two functions, one for each task,
and call them directly from kexec_load_purgatory.
Link: http://lkml.kernel.org/r/20180321112751.22196-7-prudo@linux.vnet.ibm.com
Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the relocations are applied to the purgatory only the section the
relocations are applied to is writable. The other sections, i.e. the
symtab and .rel/.rela, are in read-only kexec_purgatory. Highlight this
by marking the corresponding variables as 'const'.
While at it also change the signatures of arch_kexec_apply_relocations* to
take section pointers instead of just the index of the relocation section.
This removes the second lookup and sanity check of the sections in arch
code.
Link: http://lkml.kernel.org/r/20180321112751.22196-6-prudo@linux.vnet.ibm.com
Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The stripped purgatory does not contain a symtab. So when looking for
symbols this is done in read-only kexec_purgatory. Highlight this by
marking the corresponding variables as 'const'.
Link: http://lkml.kernel.org/r/20180321112751.22196-5-prudo@linux.vnet.ibm.com
Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kexec_purgatory buffer is read-only. Thus all pointers into
kexec_purgatory are read-only, too. Point this out by explicitly
marking purgatory_info->ehdr as 'const' and update the comments in
purgatory_info.
Link: http://lkml.kernel.org/r/20180321112751.22196-4-prudo@linux.vnet.ibm.com
Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Before the purgatory is loaded several checks are done whether the ELF
file in kexec_purgatory is valid or not. These checks are incomplete.
For example they don't check for the total size of the sections defined
in the section header table or if the entry point actually points into
the purgatory.
On the other hand the purgatory, although an ELF file on its own, is
part of the kernel. Thus not trusting the purgatory means not trusting
the kernel build itself.
So remove all validity checks on the purgatory and just trust the kernel
build.
Link: http://lkml.kernel.org/r/20180321112751.22196-3-prudo@linux.vnet.ibm.com
Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the previous patches, commonly-used routines, exclude_mem_range() and
prepare_elf64_headers(), were carved out. Now place them in kexec
common code. A prefix "crash_" is given to each of their names to avoid
possible name collisions.
Link: http://lkml.kernel.org/r/20180306102303.9063-8-takahiro.akashi@linaro.org
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Acked-by: Dave Young <dyoung@redhat.com>
Tested-by: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As arch_kexec_kernel_image_{probe,load}(),
arch_kimage_file_post_load_cleanup() and arch_kexec_kernel_verify_sig()
are almost duplicated among architectures, they can be commonalized with
an architecture-defined kexec_file_ops array. So let's factor them out.
Link: http://lkml.kernel.org/r/20180306102303.9063-3-takahiro.akashi@linaro.org
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Acked-by: Dave Young <dyoung@redhat.com>
Tested-by: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "kexec_file, x86, powerpc: refactoring for other
architecutres", v2.
This is a preparatory patchset for adding kexec_file support on arm64.
It was originally included in a arm64 patch set[1], but Philipp is also
working on their kexec_file support on s390[2] and some changes are now
conflicting.
So these common parts were extracted and put into a separate patch set
for better integration. What's more, my original patch#4 was split into
a few small chunks for easier review after Dave's comment.
As such, the resulting code is basically identical with my original, and
the only *visible* differences are:
- renaming of _kexec_kernel_image_probe() and _kimage_file_post_load_cleanup()
- change one of types of arguments at prepare_elf64_headers()
Those, unfortunately, require a couple of trivial changes on the rest
(#1, #6 to #13) of my arm64 kexec_file patch set[1].
Patch #1 allows making a use of purgatory optional, particularly useful
for arm64.
Patch #2 commonalizes arch_kexec_kernel_{image_probe, image_load,
verify_sig}() and arch_kimage_file_post_load_cleanup() across
architectures.
Patches #3-#7 are also intended to generalize parse_elf64_headers(),
along with exclude_mem_range(), to be made best re-use of.
[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2018-February/561182.html
[2] http://lkml.iu.edu//hypermail/linux/kernel/1802.1/02596.html
This patch (of 7):
On arm64, crash dump kernel's usable memory is protected by *unmapping*
it from kernel virtual space unlike other architectures where the region
is just made read-only. It is highly unlikely that the region is
accidentally corrupted and this observation rationalizes that digest
check code can also be dropped from purgatory. The resulting code is so
simple as it doesn't require a bit ugly re-linking/relocation stuff,
i.e. arch_kexec_apply_relocations_add().
Please see:
http://lists.infradead.org/pipermail/linux-arm-kernel/2017-December/545428.html
All that the purgatory does is to shuffle arguments and jump into a new
kernel, while we still need to have some space for a hash value
(purgatory_sha256_digest) which is never checked against.
As such, it doesn't make sense to have trampline code between old kernel
and new kernel on arm64.
This patch introduces a new configuration, ARCH_HAS_KEXEC_PURGATORY, and
allows related code to be compiled in only if necessary.
[takahiro.akashi@linaro.org: fix trivial screwup]
Link: http://lkml.kernel.org/r/20180309093346.GF25863@linaro.org
Link: http://lkml.kernel.org/r/20180306102303.9063-2-takahiro.akashi@linaro.org
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Acked-by: Dave Young <dyoung@redhat.com>
Tested-by: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 6326fec112 ("mm: Use owner_priv bit for PageSwapCache,
valid when PageSwapBacked"), PG_swapcache is an alias for
PG_owner_priv_1, which may be also used for other purposes.
To know whether the bit indeed has the PG_swapcache meaning, it is
necessary to check PG_swapbacked, hence this bit must be exported.
Link: http://lkml.kernel.org/r/20180410161345.142e142d@ezekiel.suse.cz
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Xunlei Pang <xlpang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: "Marc-Andr Lureau" <marcandre.lureau@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We've got a bug report indicating a kernel panic at booting on an x86-32
system, and it turned out to be the invalid PCI resource assigned after
reallocation. __find_resource() first aligns the resource start address
and resets the end address with start+size-1 accordingly, then checks
whether it's contained. Here the end address may overflow the integer,
although resource_contains() still returns true because the function
validates only start and end address. So this ends up with returning an
invalid resource (start > end).
There was already an attempt to cover such a problem in the commit
47ea91b405 ("Resource: fix wrong resource window calculation"), but
this case is an overseen one.
This patch adds the validity check of the newly calculated resource for
avoiding the integer overflow problem.
Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=1086739
Link: http://lkml.kernel.org/r/s5hpo37d5l8.wl-tiwai@suse.de
Fixes: 23c570a674 ("resource: ability to resize an allocated resource")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reported-by: Michael Henders <hendersm@shaw.ca>
Tested-by: Michael Henders <hendersm@shaw.ca>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Replace open coded "ARRAY_SIZE()" with macro
- Updates to uprobes
- Bug fix for perf event filter on error path
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWs+2YxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qsRUAP9okqGRR/01bBLqNKiJ2j5YeBc9YlWl
R2rC0xbwVBLgJQEAwpE5jxahqKutbgrBDalDeCmXmeTOhSbGRJaBxXqwzwE=
=ZAuQ
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"A few clean ups and bug fixes:
- replace open coded "ARRAY_SIZE()" with macro
- updates to uprobes
- bug fix for perf event filter on error path"
* tag 'trace-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Enforce passing in filter=NULL to create_filter()
trace_uprobe: Simplify probes_seq_show()
trace_uprobe: Use %lx to display offset
tracing/uprobe: Add support for overlayfs
tracing: Use ARRAY_SIZE() macro instead of open coding it
* minor regression test cleanup
* formatting fixes for end user use of kdb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zz/y
-----END PGP SIGNATURE-----
Merge tag 'for_linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb
Pull kdb updates from Jason Wessel:
- fix 2032 time access issues and new compiler warnings
- minor regression test cleanup
- formatting fixes for end user use of kdb
* tag 'for_linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
kdb: use memmove instead of overlapping memcpy
kdb: use ktime_get_mono_fast_ns() instead of ktime_get_ts()
kdb: bl: don't use tab character in output
kdb: drop newline in unknown command output
kdb: make "mdr" command repeat
kdb: use __ktime_get_real_seconds instead of __current_kernel_time
misc: kgdbts: Display progress of asynchronous tests
Non-root user cannot create kprobe or uprobe through the text-based
interface (kprobe_events, uprobe_events),so they should not be able
to create probes via perf_event_open() either.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Song Liu <songliubraving@fb.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 33ea4b2427 ("perf/core: Implement the 'perf_uprobe' PMU")
Fixes: e12f03d703 ("perf/core: Implement the 'perf_kprobe' PMU")
Link: http://lkml.kernel.org/r/C0B2EFB5-C403-4BDB-9046-C14B3EE66999@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Rework the idle loop in order to prevent CPUs from spending too
much time in shallow idle states by making it stop the scheduler
tick before putting the CPU into an idle state only if the idle
duration predicted by the idle governor is long enough. That
required the code to be reordered to invoke the idle governor
before stopping the tick, among other things (Rafael Wysocki,
Frederic Weisbecker, Arnd Bergmann).
- Add the missing description of the residency sysfs attribute to
the cpuidle documentation (Prashanth Prakash).
- Finalize the cpufreq cleanup moving frequency table validation
from drivers to the core (Viresh Kumar).
- Fix a clock leak regression in the armada-37xx cpufreq driver
(Gregory Clement).
- Fix the initialization of the CPU performance data structures
for shared policies in the CPPC cpufreq driver (Shunyong Yang).
- Clean up the ti-cpufreq, intel_pstate and CPPC cpufreq drivers
a bit (Viresh Kumar, Rafael Wysocki).
- Mark the expected switch fall-throughs in the PM QoS core (Gustavo
Silva).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Pnk4
-----END PGP SIGNATURE-----
Merge tag 'pm-4.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These include one big-ticket item which is the rework of the idle loop
in order to prevent CPUs from spending too much time in shallow idle
states. It reduces idle power on some systems by 10% or more and may
improve performance of workloads in which the idle loop overhead
matters. This has been in the works for several weeks and it has been
tested and reviewed quite thoroughly.
Also included are changes that finalize the cpufreq cleanup moving
frequency table validation from drivers to the core, a few fixes and
cleanups of cpufreq drivers, a cpuidle documentation update and a PM
QoS core update to mark the expected switch fall-throughs in it.
Specifics:
- Rework the idle loop in order to prevent CPUs from spending too
much time in shallow idle states by making it stop the scheduler
tick before putting the CPU into an idle state only if the idle
duration predicted by the idle governor is long enough.
That required the code to be reordered to invoke the idle governor
before stopping the tick, among other things (Rafael Wysocki,
Frederic Weisbecker, Arnd Bergmann).
- Add the missing description of the residency sysfs attribute to the
cpuidle documentation (Prashanth Prakash).
- Finalize the cpufreq cleanup moving frequency table validation from
drivers to the core (Viresh Kumar).
- Fix a clock leak regression in the armada-37xx cpufreq driver
(Gregory Clement).
- Fix the initialization of the CPU performance data structures for
shared policies in the CPPC cpufreq driver (Shunyong Yang).
- Clean up the ti-cpufreq, intel_pstate and CPPC cpufreq drivers a
bit (Viresh Kumar, Rafael Wysocki).
- Mark the expected switch fall-throughs in the PM QoS core (Gustavo
Silva)"
* tag 'pm-4.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
tick-sched: avoid a maybe-uninitialized warning
cpufreq: Drop cpufreq_table_validate_and_show()
cpufreq: SCMI: Don't validate the frequency table twice
cpufreq: CPPC: Initialize shared perf capabilities of CPUs
cpufreq: armada-37xx: Fix clock leak
cpufreq: CPPC: Don't set transition_latency
cpufreq: ti-cpufreq: Use builtin_platform_driver()
cpufreq: intel_pstate: Do not include debugfs.h
PM / QoS: mark expected switch fall-throughs
cpuidle: Add definition of residency to sysfs documentation
time: hrtimer: Use timerqueue_iterate_next() to get to the next timer
nohz: Avoid duplication of code related to got_idle_tick
nohz: Gather tick_sched booleans under a common flag field
cpuidle: menu: Avoid selecting shallow states with stopped tick
cpuidle: menu: Refine idle state selection for running tick
sched: idle: Select idle state before stopping the tick
time: hrtimer: Introduce hrtimer_next_event_without()
time: tick-sched: Split tick_nohz_stop_sched_tick()
cpuidle: Return nohz hint from cpuidle_select()
jiffies: Introduce USER_TICK_USEC and redefine TICK_USEC
...
This results in no change in structure size on 64-bit machines as it
fits in the padding between the gfp_t and the void *. 32-bit machines
will grow the structure from 8 to 12 bytes. Almost all radix trees are
protected with (at least) a spinlock, so as they are converted from
radix trees to xarrays, the data structures will shrink again.
Initialising the spinlock requires a name for the benefit of lockdep, so
RADIX_TREE_INIT() now needs to know the name of the radix tree it's
initialising, and so do IDR_INIT() and IDA_INIT().
Also add the xa_lock() and xa_unlock() family of wrappers to make it
easier to use the lock. If we could rely on -fplan9-extensions in the
compiler, we could avoid all of this syntactic sugar, but that wasn't
added until gcc 4.6.
Link: http://lkml.kernel.org/r/20180313132639.17387-8-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kdoc comments are added to the do_proc_dointvec_minmax_conv_param and
do_proc_douintvec_minmax_conv_param structures thare are used internally
for range checking.
The error codes returned by proc_dointvec_minmax() and
proc_douintvec_minmax() are also documented.
Link: http://lkml.kernel.org/r/1519926220-7453-3-git-send-email-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As using an unsafe module parameter is, by its very definition, an
expected user action, emitting a warning is overkill. Nothing has yet
gone wrong, and we add a taint flag for any future oops should something
actually go wrong. So instead of having a user controllable pr_warn,
downgrade it to a pr_notice for "a normal, but significant condition".
We make use of unsafe kernel parameters in igt
(https://cgit.freedesktop.org/drm/igt-gpu-tools/) (we have not yet
succeeded in removing all such debugging options), which generates a
warning and taints the kernel. The warning is unhelpful as we then need
to filter it out again as we check that every test themselves do not
provoke any kernel warnings.
Link: http://lkml.kernel.org/r/20180226151919.9674-1-chris@chris-wilson.co.uk
Fixes: 91f9d330cc ("module: make it possible to have unsafe, tainting module params")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Petri Latvala <petri.latvala@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix sizeof argument to be the same as the data variable name. Probably
a copy/paste error.
Mostly harmless since both variables are unsigned int.
Fixes kernel bugzilla #197371:
Possible access to unintended variable in "kernel/sysctl.c" line 1339
https://bugzilla.kernel.org/show_bug.cgi?id=197371
Link: http://lkml.kernel.org/r/e0d0531f-361e-ef5f-8499-32743ba907e1@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Petru Mihancea <petrum@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
So "struct uts_namespace" can enjoy fine-grained SLAB debugging and
usercopy protection.
I'd prefer shorter name "utsns" but there is "user_namespace" already.
Link: http://lkml.kernel.org/r/20180228215158.GA23146@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since the randstruct plugin can intentionally produce extremely unusual
kernel structure layouts (even performance pathological ones), some
maintainers want to be able to trivially determine if an Oops is coming
from a randstruct-built kernel, so as to keep their sanity when
debugging. This adds the new flag and initializes taint_mask
immediately when built with randstruct.
Link: http://lkml.kernel.org/r/1519084390-43867-4-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This consolidates the taint bit documentation into a single place with
both numeric and letter values. Additionally adds the missing TAINT_AUX
documentation.
Link: http://lkml.kernel.org/r/1519084390-43867-3-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This converts to using indexed initializers instead of comments, adds a
comment on why the taint flags can't be an enum, and make sure that no
one forgets to update the taint_flags when adding new bits.
Link: http://lkml.kernel.org/r/1519084390-43867-2-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There's some inconsistency with what to set the output parameter filterp
when passing to create_filter(..., struct event_filter **filterp).
Whatever filterp points to, should be NULL when calling this function. The
create_filter() calls create_filter_start() with a pointer to a local
"filter" variable that is set to NULL. The create_filter_start() has a
WARN_ON() if the passed in pointer isn't pointing to a value set to NULL.
Ideally, create_filter() should pass the filterp variable it received to
create_filter_start() and not hide it as with a local variable, this allowed
create_filter() to fail, and not update the passed in filter, and the caller
of create_filter() then tried to free filter, which was never initialized to
anything, causing memory corruption.
Link: http://lkml.kernel.org/r/00000000000032a0c30569916870@google.com
Fixes: 80765597bc ("tracing: Rewrite filter logic to be simpler and faster")
Reported-by: syzbot+dadcc936587643d7f568@syzkaller.appspotmail.com
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Simplify probes_seq_show() function. No change in output
before and after patch.
Link: http://lkml.kernel.org/r/20180315082756.9050-2-ravi.bangoria@linux.vnet.ibm.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
tu->offset is unsigned long, not a pointer, thus %lx should
be used to print it, not the %px.
Link: http://lkml.kernel.org/r/20180315082756.9050-1-ravi.bangoria@linux.vnet.ibm.com
Cc: stable@vger.kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 0e4d819d08 ("trace_uprobe: Display correct offset in uprobe_events")
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
uprobes cannot successfully attach to binaries located in a directory
mounted with overlayfs.
To verify, create directories for mounting overlayfs
(upper,lower,work,merge), move some binary into merge/ and use readelf
to obtain some known instruction of the binary. I used /bin/true and the
entry instruction(0x13b0):
$ mount -t overlay overlay -o lowerdir=lower,upperdir=upper,workdir=work merge
$ cd /sys/kernel/debug/tracing
$ echo 'p:true_entry PATH_TO_MERGE/merge/true:0x13b0' > uprobe_events
$ echo 1 > events/uprobes/true_entry/enable
This returns 'bash: echo: write error: Input/output error' and dmesg
tells us 'event trace: Could not enable event true_entry'
This change makes create_trace_uprobe() look for the real inode of a
dentry. In the case of normal filesystems, this simplifies to just
returning the inode. In the case of overlayfs(and similar fs) we will
obtain the underlying dentry and corresponding inode, upon which uprobes
can successfully register.
Running the example above with the patch applied, we can see that the
uprobe is enabled and will output to trace as expected.
Link: http://lkml.kernel.org/r/20180410231030.2720-1-hmclauchlan@fb.com
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Howard McLauchlan <hmclauchlan@fb.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
It is useless to re-invent the ARRAY_SIZE macro so let's use it instead
of DATA_CNT.
Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
(sizeof(E)@p /sizeof(*E))
|
(sizeof(E)@p /sizeof(E[...]))
|
(sizeof(E)@p /sizeof(T))
)
Link: http://lkml.kernel.org/r/20171016012250.26453-1-jeremy.lefaure@lse.epita.fr
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
[ Removed useless include of kernel.h ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
* pm-cpuidle:
tick-sched: avoid a maybe-uninitialized warning
cpuidle: Add definition of residency to sysfs documentation
time: hrtimer: Use timerqueue_iterate_next() to get to the next timer
nohz: Avoid duplication of code related to got_idle_tick
nohz: Gather tick_sched booleans under a common flag field
cpuidle: menu: Avoid selecting shallow states with stopped tick
cpuidle: menu: Refine idle state selection for running tick
sched: idle: Select idle state before stopping the tick
time: hrtimer: Introduce hrtimer_next_event_without()
time: tick-sched: Split tick_nohz_stop_sched_tick()
cpuidle: Return nohz hint from cpuidle_select()
jiffies: Introduce USER_TICK_USEC and redefine TICK_USEC
sched: idle: Do not stop the tick before cpuidle_idle_call()
sched: idle: Do not stop the tick upfront in the idle loop
time: tick-sched: Reorganize idle tick management code
* pm-qos:
PM / QoS: mark expected switch fall-throughs
syzbot reported a possible deadlock in perf_event_detach_bpf_prog.
The error details:
======================================================
WARNING: possible circular locking dependency detected
4.16.0-rc7+ #3 Not tainted
------------------------------------------------------
syz-executor7/24531 is trying to acquire lock:
(bpf_event_mutex){+.+.}, at: [<000000008a849b07>] perf_event_detach_bpf_prog+0x92/0x3d0 kernel/trace/bpf_trace.c:854
but task is already holding lock:
(&mm->mmap_sem){++++}, at: [<0000000038768f87>] vm_mmap_pgoff+0x198/0x280 mm/util.c:353
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&mm->mmap_sem){++++}:
__might_fault+0x13a/0x1d0 mm/memory.c:4571
_copy_to_user+0x2c/0xc0 lib/usercopy.c:25
copy_to_user include/linux/uaccess.h:155 [inline]
bpf_prog_array_copy_info+0xf2/0x1c0 kernel/bpf/core.c:1694
perf_event_query_prog_array+0x1c7/0x2c0 kernel/trace/bpf_trace.c:891
_perf_ioctl kernel/events/core.c:4750 [inline]
perf_ioctl+0x3e1/0x1480 kernel/events/core.c:4770
vfs_ioctl fs/ioctl.c:46 [inline]
do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:686
SYSC_ioctl fs/ioctl.c:701 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:692
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
-> #0 (bpf_event_mutex){+.+.}:
lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3920
__mutex_lock_common kernel/locking/mutex.c:756 [inline]
__mutex_lock+0x16f/0x1a80 kernel/locking/mutex.c:893
mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:908
perf_event_detach_bpf_prog+0x92/0x3d0 kernel/trace/bpf_trace.c:854
perf_event_free_bpf_prog kernel/events/core.c:8147 [inline]
_free_event+0xbdb/0x10f0 kernel/events/core.c:4116
put_event+0x24/0x30 kernel/events/core.c:4204
perf_mmap_close+0x60d/0x1010 kernel/events/core.c:5172
remove_vma+0xb4/0x1b0 mm/mmap.c:172
remove_vma_list mm/mmap.c:2490 [inline]
do_munmap+0x82a/0xdf0 mm/mmap.c:2731
mmap_region+0x59e/0x15a0 mm/mmap.c:1646
do_mmap+0x6c0/0xe00 mm/mmap.c:1483
do_mmap_pgoff include/linux/mm.h:2223 [inline]
vm_mmap_pgoff+0x1de/0x280 mm/util.c:355
SYSC_mmap_pgoff mm/mmap.c:1533 [inline]
SyS_mmap_pgoff+0x462/0x5f0 mm/mmap.c:1491
SYSC_mmap arch/x86/kernel/sys_x86_64.c:100 [inline]
SyS_mmap+0x16/0x20 arch/x86/kernel/sys_x86_64.c:91
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&mm->mmap_sem);
lock(bpf_event_mutex);
lock(&mm->mmap_sem);
lock(bpf_event_mutex);
*** DEADLOCK ***
======================================================
The bug is introduced by Commit f371b304f1 ("bpf/tracing: allow
user space to query prog array on the same tp") where copy_to_user,
which requires mm->mmap_sem, is called inside bpf_event_mutex lock.
At the same time, during perf_event file descriptor close,
mm->mmap_sem is held first and then subsequent
perf_event_detach_bpf_prog needs bpf_event_mutex lock.
Such a senario caused a deadlock.
As suggested by Daniel, moving copy_to_user out of the
bpf_event_mutex lock should fix the problem.
Fixes: f371b304f1 ("bpf/tracing: allow user space to query prog array on the same tp")
Reported-by: syzbot+dc5ca0e4c9bfafaf2bae@syzkaller.appspotmail.com
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
- Tom Zanussi's extended histogram work
This adds the synthetic events to have histograms from multiple event data
Adds triggers "onmatch" and "onmax" to call the synthetic events
Several updates to the histogram code from this
- Allow way to nest ring buffer calls in the same context
- Allow absolute time stamps in ring buffer
- Rewrite of filter code parsing based on Al Viro's suggestions
- Setting of trace_clock to global if TSC is unstable (on boot)
- Better OOM handling when allocating large ring buffers
- Added initcall tracepoints (consolidated initcall_debug code with them)
And other various fixes and clean ups
-----BEGIN PGP SIGNATURE-----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=91oN
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"New features:
- Tom Zanussi's extended histogram work.
This adds the synthetic events to have histograms from multiple
event data Adds triggers "onmatch" and "onmax" to call the
synthetic events Several updates to the histogram code from this
- Allow way to nest ring buffer calls in the same context
- Allow absolute time stamps in ring buffer
- Rewrite of filter code parsing based on Al Viro's suggestions
- Setting of trace_clock to global if TSC is unstable (on boot)
- Better OOM handling when allocating large ring buffers
- Added initcall tracepoints (consolidated initcall_debug code with
them)
And other various fixes and clean ups"
* tag 'trace-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (68 commits)
init: Have initcall_debug still work without CONFIG_TRACEPOINTS
init, tracing: Have printk come through the trace events for initcall_debug
init, tracing: instrument security and console initcall trace events
init, tracing: Add initcall trace events
tracing: Add rcu dereference annotation for test func that touches filter->prog
tracing: Add rcu dereference annotation for filter->prog
tracing: Fixup logic inversion on setting trace_global_clock defaults
tracing: Hide global trace clock from lockdep
ring-buffer: Add set/clear_current_oom_origin() during allocations
ring-buffer: Check if memory is available before allocation
lockdep: Add print_irqtrace_events() to __warn
vsprintf: Do not preprocess non-dereferenced pointers for bprintf (%px and %pK)
tracing: Uninitialized variable in create_tracing_map_fields()
tracing: Make sure variable string fields are NULL-terminated
tracing: Add action comparisons when testing matching hist triggers
tracing: Don't add flag strings when displaying variable references
tracing: Fix display of hist trigger expressions containing timestamps
ftrace: Drop a VLA in module_exists()
tracing: Mention trace_clock=global when warning about unstable clocks
tracing: Default to using trace_global_clock if sched_clock is unstable
...
Fix string fetch function to terminate with NUL.
It is OK to drop the rest of string.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: security@kernel.org
Cc: 范龙飞 <long7573@126.com>
Fixes: 5baaa59ef0 ("tracing/probes: Implement 'memory' fetch method for uprobes")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The use of bitfields seems to confuse gcc, leading to a false-positive
warning in all compiler versions:
kernel/time/tick-sched.c: In function 'tick_nohz_idle_exit':
kernel/time/tick-sched.c:538:2: error: 'now' may be used uninitialized in this function [-Werror=maybe-uninitialized]
This introduces a temporary variable to track the flags so gcc
doesn't have to evaluate twice, eliminating the code path that
leads to the warning.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85301
Fixes: 1cae544d42d2 ("nohz: Gather tick_sched booleans under a common flag field")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Similarly to the uprobe PMU fix in perf_kprobe_init(), fix error
handling in perf_uprobe_init() as well.
Reported-by: 范龙飞 <long7573@126.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: e12f03d703 ("perf/core: Implement the 'perf_kprobe' PMU")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull networking fixes from David Miller:
1) The sockmap code has to free socket memory on close if there is
corked data, from John Fastabend.
2) Tunnel names coming from userspace need to be length validated. From
Eric Dumazet.
3) arp_filter() has to take VRFs properly into account, from Miguel
Fadon Perlines.
4) Fix oops in error path of tcf_bpf_init(), from Davide Caratti.
5) Missing idr_remove() in u32_delete_key(), from Cong Wang.
6) More syzbot stuff. Several use of uninitialized value fixes all
over, from Eric Dumazet.
7) Do not leak kernel memory to userspace in sctp, also from Eric
Dumazet.
8) Discard frames from unused ports in DSA, from Andrew Lunn.
9) Fix DMA mapping and reset/failover problems in ibmvnic, from Thomas
Falcon.
10) Do not access dp83640 PHY registers prematurely after reset, from
Esben Haabendal.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits)
vhost-net: set packet weight of tx polling to 2 * vq size
net: thunderx: rework mac addresses list to u64 array
inetpeer: fix uninit-value in inet_getpeer
dp83640: Ensure against premature access to PHY registers after reset
devlink: convert occ_get op to separate registration
ARM: dts: ls1021a: Specify TBIPA register address
net/fsl_pq_mdio: Allow explicit speficition of TBIPA address
ibmvnic: Do not reset CRQ for Mobility driver resets
ibmvnic: Fix failover case for non-redundant configuration
ibmvnic: Fix reset scheduler error handling
ibmvnic: Zero used TX descriptor counter on reset
ibmvnic: Fix DMA mapping mistakes
tipc: use the right skb in tipc_sk_fill_sock_diag()
sctp: sctp_sockaddr_af must check minimal addr length for AF_INET6
net: dsa: Discard frames from unused ports
sctp: do not leak kernel memory to user space
soreuseport: initialise timewait reuseport field
ipv4: fix uninit-value in ip_route_output_key_hash_rcu()
dccp: initialize ireq->ir_mark
net: fix uninit-value in __hw_addr_add_ex()
...
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use timerqueue_iterate_next() to get to the next timer in
__hrtimer_next_event_base() without browsing the timerqueue
details diredctly.
No intentional changes in functionality.
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Move the code setting ts->got_idle_tick into tick_sched_do_timer() to
avoid code duplication.
No intentional changes in functionality.
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Optimize the space and leave plenty of room for further flags.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
[ rjw: Do not use __this_cpu_read() to access tick_stopped and add
got_idle_tick to avoid overloading inidle ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If the tick isn't stopped, the target residency of the state selected
by the menu governor may be greater than the actual time to the next
tick and that means lost energy.
To avoid that, make tick_nohz_get_sleep_length() return the current
time to the next event (before stopping the tick) in addition to the
estimated one via an extra pointer argument and make menu_select()
use that value to refine the state selection when necessary.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
In order to address the issue with short idle duration predictions
by the idle governor after the scheduler tick has been stopped,
reorder the code in cpuidle_idle_call() so that the governor idle
state selection runs before tick_nohz_idle_go_idle() and use the
"nohz" hint returned by cpuidle_select() to decide whether or not
to stop the tick.
This isn't straightforward, because menu_select() invokes
tick_nohz_get_sleep_length() to get the time to the next timer
event and the number returned by the latter comes from
__tick_nohz_idle_stop_tick(). Fortunately, however, it is possible
to compute that number without actually stopping the tick and with
the help of the existing code.
Namely, tick_nohz_get_sleep_length() can be made call
tick_nohz_next_event(), introduced earlier, to get the time to the
next non-highres timer event. If that happens, tick_nohz_next_event()
need not be called by __tick_nohz_idle_stop_tick() again.
If it turns out that the scheduler tick cannot be stopped going
forward or the next timer event is too close for the tick to be
stopped, tick_nohz_get_sleep_length() can simply return the time to
the next event currently programmed into the corresponding clock
event device.
In addition to knowing the return value of tick_nohz_next_event(),
however, tick_nohz_get_sleep_length() needs to know the time to the
next highres timer event, but with the scheduler tick timer excluded,
which can be computed with the help of hrtimer_get_next_event().
That minimum of that number and the tick_nohz_next_event() return
value is the total time to the next timer event with the assumption
that the tick will be stopped. It can be returned to the idle
governor which can use it for predicting idle duration (under the
assumption that the tick will be stopped) and deciding whether or
not it makes sense to stop the tick before putting the CPU into the
selected idle state.
With the above, the sleep_length field in struct tick_sched is not
necessary any more, so drop it.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199227
Reported-by: Doug Smythies <dsmythies@telus.net>
Reported-by: Thomas Ilsche <thomas.ilsche@tu-dresden.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2018-04-09
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Two sockmap fixes: i) fix a potential warning when a socket with
pending cork data is closed by freeing the memory right when the
socket is closed instead of seeing still outstanding memory at
garbage collector time, ii) fix a NULL pointer deref in case of
duplicates release calls, so make sure to only reset the sk_prot
pointer when it's in a valid state to do so, both from John.
2) Fix a compilation warning in bpf_prog_attach_check_attach_type()
by moving the function under CONFIG_CGROUP_BPF ifdef since only
used there, from Anders.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull general security layer updates from James Morris:
- Convert security hooks from list to hlist, a nice cleanup, saving
about 50% of space, from Sargun Dhillon.
- Only pass the cred, not the secid, to kill_pid_info_as_cred and
security_task_kill (as the secid can be determined from the cred),
from Stephen Smalley.
- Close a potential race in kernel_read_file(), by making the file
unwritable before calling the LSM check (vs after), from Kees Cook.
* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
security: convert security hooks to use hlist
exec: Set file unwritable before LSM check
usb, signal, security: only pass the cred, not the secid, to kill_pid_info_as_cred and security_task_kill
The next set of changes will need to compute the time to the next
hrtimer event over all hrtimers except for the scheduler tick one.
To that end introduce a new helper function,
hrtimer_next_event_without(), for computing the time until the next
hrtimer event over all timers except for one and modify the underlying
code in __hrtimer_next_event_base() to prepare it for being called by
that new function.
No intentional changes in functionality.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
In order to address the issue with short idle duration predictions
by the idle governor after the scheduler tick has been stopped, split
tick_nohz_stop_sched_tick() into two separate routines, one computing
the time to the next timer event and the other simply stopping the
tick when the time to the next timer event is known.
Prepare these two routines to be called separately, as one of them
will be called by the idle governor in the cpuidle_select() code
path after subsequent changes.
Update the former callers of tick_nohz_stop_sched_tick() to use
the new routines, tick_nohz_next_event() and tick_nohz_stop_tick(),
instead of it and move the updates of the sleep_length field in
struct tick_sched into __tick_nohz_idle_stop_tick() as it doesn't
need to be updated anywhere else.
There should be no intentional visible changes in functionality
resulting from this change.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
This cleans up the qemu fw cfg device driver.
On top of this, vmcore is dumped there on crash to
help debugging witH kASLR enabled.
Also included are some fixes in vhost.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaxYDNAAoJECgfDbjSjVRpHA8IAKrzyI2rB5KCn5Obo/SwgO9k
7z6FBw+QMWXUwnJGBjt7OFber3LIah0oLh39puohrKFo/OkjSZWSqBWZp5I43lHb
sijflF2QuZxWJvCg9GQswhVSmpouwKgFI3mQYqrX+T/MQxeozT0eAdc0TIX4OOYq
3gUtpgw9VZ1FEKKHgHv2ZWsiiN3QwVqSrR2QzS3hE+FZl8I1ElTRxq0evsb+d80U
Ybqbq3QcmAQms6isQyqqmAphOvi7JlHDQAWfsXQByY48cPc+oXkG6iS+jbSFJ2Fg
/YStUDmyMRxvAxdEVH8ZytigbdzAl8kAOhWKhhH/j4/nlHpT/udLm+MqIEAacYQ=
=PGTs
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull fw_cfg, vhost updates from Michael Tsirkin:
"This cleans up the qemu fw cfg device driver.
On top of this, vmcore is dumped there on crash to help debugging
with kASLR enabled.
Also included are some fixes in vhost"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost: add vsock compat ioctl
vhost: fix vhost ioctl signature to build with clang
fw_cfg: write vmcoreinfo details
crash: export paddr_vmcoreinfo_note()
fw_cfg: add DMA register
fw_cfg: add a public uapi header
fw_cfg: handle fw_cfg_read_blob() error
fw_cfg: remove inline from fw_cfg_read_blob()
fw_cfg: fix sparse warnings around FW_CFG_FILE_DIR read
fw_cfg: fix sparse warning reading FW_CFG_ID
fw_cfg: fix sparse warnings with fw_cfg_file
fw_cfg: fix sparse warnings in fw_cfg_sel_endianness()
ptr_ring: fix build
-----BEGIN PGP SIGNATURE-----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=n1dk
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20180403' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"We didn't have anything to send for v4.16, but we're back with a
little more than usual for v4.17.
Eleven patches in total, most fall into the small fix category, but
there are three non-trivial changes worth calling out:
- the audit entry filter is being removed after deprecating it for
quite a while (years of no one really using it because it turns out
to be not very practical)
- created our own version of "__mutex_owner()" because the locking
folks were upset we were using theirs
- improved our handling of kernel command line parameters to make
them more forgiving
- we fixed auditing of symlink operations
Everything passes the audit-testsuite and as of a few minutes ago it
merges well with your tree"
* tag 'audit-pr-20180403' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: add refused symlink to audit_names
audit: remove path param from link denied function
audit: link denied should not directly generate PATH record
audit: make ANOM_LINK obey audit_enabled and audit_dummy_context
audit: do not panic on invalid boot parameter
audit: track the owner of the command mutex ourselves
audit: return on memory error to avoid null pointer dereference
audit: bail before bug check if audit disabled
audit: deprecate the AUDIT_FILTER_ENTRY filter
audit: session ID should not set arch quick field pointer
audit: update bugtracker and source URIs
Merge updates from Andrew Morton:
- a few misc things
- ocfs2 updates
- the v9fs maintainers have been missing for a long time. I've taken
over v9fs patch slinging.
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (116 commits)
mm,oom_reaper: check for MMF_OOM_SKIP before complaining
mm/ksm: fix interaction with THP
mm/memblock.c: cast constant ULLONG_MAX to phys_addr_t
headers: untangle kmemleak.h from mm.h
include/linux/mmdebug.h: make VM_WARN* non-rvals
mm/page_isolation.c: make start_isolate_page_range() fail if already isolated
mm: change return type to vm_fault_t
mm, oom: remove 3% bonus for CAP_SYS_ADMIN processes
mm, page_alloc: wakeup kcompactd even if kswapd cannot free more memory
kernel/fork.c: detect early free of a live mm
mm: make counting of list_lru_one::nr_items lockless
mm/swap_state.c: make bool enable_vma_readahead and swap_vma_readahead() static
block_invalidatepage(): only release page if the full page was invalidated
mm: kernel-doc: add missing parameter descriptions
mm/swap.c: remove @cold parameter description for release_pages()
mm/nommu: remove description of alloc_vm_area
zram: drop max_zpage_size and use zs_huge_class_size()
zsmalloc: introduce zs_huge_class_size()
mm: fix races between swapoff and flush dcache
fs/direct-io.c: minor cleanups in do_blockdev_direct_IO
...
Trace events have been added around the initcall functions defined in
init/main.c. But console and security have their own initcalls. This adds
the trace events associated for those initcall functions.
Link: http://lkml.kernel.org/r/1521765208.19745.2.camel@polymtl.ca
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Abderrahmane Benbachir <abderrahmane.benbachir@polymtl.ca>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
A boot up test function update_pred_fn() dereferences filter->prog without
the proper rcu annotation.
To do this, we must also take the event_mutex first. Normally, this isn't
needed because this test function can not race with other use cases that
touch the event filters (it is disabled if any events are enabled).
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 80765597bc ("tracing: Rewrite filter logic to be simpler and faster")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
ftrace_function_set_filter() referenences filter->prog without annotation
and sparse complains about it. It needs a rcu_dereference_protected()
wrapper.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 80765597bc ("tracing: Rewrite filter logic to be simpler and faster")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In commit 932066a15335 ("tracing: Default to using trace_global_clock if
sched_clock is unstable"), the logic for deciding to override the
default clock if unstable was reversed from the earlier posting. I was
trying to reduce the width of the message by using an early return
rather than a if-block, but reverted back to using the if-block and
accidentally left the predicate inverted.
Link: http://lkml.kernel.org/r/20180404212450.26646-1-chris@chris-wilson.co.uk
Fixes: 932066a15335 ("tracing: Default to using trace_global_clock if sched_clock is unstable")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Function tracing can trace in NMIs and such. If the TSC is determined
to be unstable, the tracing clock will switch to the global clock on
boot up, unless "trace_clock" is specified on the kernel command line.
The global clock disables interrupts to access sched_clock_cpu(), and in
doing so can be done within lockdep internals (because of function
tracing and NMIs). This can trigger false lockdep splats.
The trace_clock_global() is special, best not to trace the irq logic
within it.
Link: http://lkml.kernel.org/r/20180404145015.77bde42d@gandalf.local.home
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As si_mem_available() can say there is enough memory even though the memory
available is not useable by the ring buffer, it is best to not kill innocent
applications because the ring buffer is taking up all the memory while it is
trying to allocate a great deal of memory.
If the allocator is user space (because kernel threads can also increase the
size of the kernel ring buffer on boot up), then after si_mem_available()
says there is enough memory, set the OOM killer to kill the current task if
an OOM triggers during the allocation.
Link: http://lkml.kernel.org/r/20180404062340.GD6312@dhcp22.suse.cz
Suggested-by: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The ring buffer is made up of a link list of pages. When making the ring
buffer bigger, it will allocate all the pages it needs before adding to the
ring buffer, and if it fails, it frees them and returns an error. This makes
increasing the ring buffer size an all or nothing action. When this was
first created, the pages were allocated with "NORETRY". This was to not
cause any Out-Of-Memory (OOM) actions from allocating the ring buffer. But
NORETRY was too strict, as the ring buffer would fail to expand even when
there's memory available, but was taken up in the page cache.
Commit 848618857d ("tracing/ring_buffer: Try harder to allocate") changed
the allocating from NORETRY to RETRY_MAYFAIL. The RETRY_MAYFAIL would
allocate from the page cache, but if there was no memory available, it would
simple fail the allocation and not trigger an OOM.
This worked fine, but had one problem. As the ring buffer would allocate one
page at a time, it could take up all memory in the system before it failed
to allocate and free that memory. If the allocation is happening and the
ring buffer allocates all memory and then tries to take more than available,
its allocation will not trigger an OOM, but if there's any allocation that
happens someplace else, that could trigger an OOM, even though once the ring
buffer's allocation fails, it would free up all the previous memory it tried
to allocate, and allow other memory allocations to succeed.
Commit d02bd27bd3 ("mm/page_alloc.c: calculate 'available' memory in a
separate function") separated out si_mem_availble() as a separate function
that could be used to see how much memory is available in the system. Using
this function to make sure that the ring buffer could be allocated before it
tries to allocate pages we can avoid allocating all memory in the system and
making it vulnerable to OOMs if other allocations are taking place.
Link: http://lkml.kernel.org/r/1522320104-6573-1-git-send-email-zhaoyang.huang@spreadtrum.com
CC: stable@vger.kernel.org
Cc: linux-mm@kvack.org
Fixes: 848618857d ("tracing/ring_buffer: Try harder to allocate")
Requires: d02bd27bd3 ("mm/page_alloc.c: calculate 'available' memory in a separate function")
Reported-by: Zhaoyang Huang <huangzhaoyang@gmail.com>
Tested-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Running a test on a x86_32 kernel I triggered a bug that an interrupt
disable/enable isn't being catched by lockdep. At least knowing where the
last one was found would be helpful, but the warnings that are produced do
not show this information. Even without debugging lockdep, having the WARN()
display the last place hard and soft irqs were enabled or disabled is
valuable.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Smatch complains that idx can be used uninitialized when we check if
(idx < 0). It has to be the first iteration through the loop and the
HIST_FIELD_FL_STACKTRACE bit has to be clear and the HIST_FIELD_FL_VAR
bit has to be set to reach the bug.
Link: http://lkml.kernel.org/r/20180328114815.GC29050@mwanda
Fixes: 30350d65ac ("tracing: Add variable support to hist triggers")
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The strncpy() currently being used for variable string fields can
result in a lack of termination if the string length is equal to the
field size. Use the safer strscpy() instead, which will guarantee
termination.
Link: http://lkml.kernel.org/r/fb97c1e518fb358c12a4057d7445ba2c46956cd7.1522256721.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Actions also need to be considered when checking for matching triggers
- triggers differing only by action should be allowed, but currently
aren't because the matching check ignores the action and erroneously
returns -EEXIST.
Add and call an actions_match() function to address that.
Here's an example using onmatch() actions. The first -EEXIST shouldn't
occur because the onmatch() is different in the second wakeup_latency()
param. The second -EEXIST shouldn't occur because it's a different
action (in this case, it doesn't have an action, so shouldn't be seen
as being the same and therefore rejected).
In the after case, both are correctly accepted (and trying to add one of
them again returns -EEXIST as it should).
before:
# echo 'wakeup_latency u64 lat; pid_t pid' >> /sys/kernel/debug/tracing/synthetic_events
# echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
# echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0 if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
# echo 'hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,next_pid) if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
# echo 'hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,prev_pid) if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
-su: echo: write error: File exists
# echo 'hist:keys=next_pid if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
-su: echo: write error: File exists
after:
# echo 'wakeup_latency u64 lat; pid_t pid' >> /sys/kernel/debug/tracing/synthetic_events
# echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
# echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0 if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
# echo 'hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,next_pid) if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
# echo 'hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,prev_pid) if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
# echo 'hist:keys=next_pid if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
Link: http://lkml.kernel.org/r/a7fd668b87ec10736c8f016ac4279c8480d50c2b.1522256721.git.tom.zanussi@linux.intel.com
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Variable references should never have flags appended when displayed -
prevent that from happening.
Before:
# cat /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
hist:keys=next_pid:vals=hitcount:wakeup_lat=common_timestamp.usecs-$ts0.usecs:...
After:
hist:keys=next_pid:vals=hitcount:wakeup_lat=common_timestamp.usecs-$ts0:...
Link: http://lkml.kernel.org/r/913318a5610ef6b24af2522575f671fa6ee19b6b.1522256721.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When displaying hist triggers, variable references that have the
timestamp field flag set are erroneously displayed as common_timestamp
rather than the variable reference. Additionally, timestamp
expressions are displayed in the same way. Fix this by forcing the
timestamp flag handling to follow variable reference and expression
handling.
Before:
# cat /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
hist:keys=next_pid:vals=hitcount:wakeup_lat=common_timestamp.usecs:...
After:
# cat /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
hist:keys=next_pid:vals=hitcount:wakeup_lat=common_timestamp.usecs-$ts0.usecs:...
Link: http://lkml.kernel.org/r/92746b06be67499c2a6217bd55395b350ad18fad.1522256721.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Mention the alternative of adding trace_clock=global to the kernel
command line when we detect that we've used an unstable clock across a
suspend/resume cycle.
Link: http://lkml.kernel.org/r/20180330150132.16903-2-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Across suspend, we may see a very large drift in timestamps if the sched
clock is unstable, prompting the global trace's ringbuffer code to warn
and suggest switching to the global clock. Preempt this request by
detecting when the sched clock is unstable (determined during
late_initcall) and automatically switching the default clock over to
trace_global_clock.
This should prevent requiring user interaction to resolve warnings such
as:
Delta way too big! 18446743856563626466 ts=18446744054496180323 write stamp = 197932553857
If you just came from a suspend/resume,
please switch to the trace global clock:
echo global > /sys/kernel/debug/tracing/trace_clock
Link: http://lkml.kernel.org/r/20180330150132.16903-1-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Commit 84676c1f21 ("genirq/affinity: assign vectors to all possible CPUs")
tried to spread the interrupts accross all possible CPUs to make sure that
in case of phsyical hotplug (e.g. virtualization) the CPUs which get
plugged in after the device was initialized are targeted by a hardware
queue and the corresponding interrupt.
This has a downside in cases where the ACPI tables claim that there are
more possible CPUs than present CPUs and the number of interrupts to spread
out is smaller than the number of possible CPUs. These bogus ACPI tables
are unfortunately not uncommon.
In such a case the vector spreading algorithm assigns interrupts to CPUs
which can never be utilized and as a consequence these interrupts are
unused instead of being mapped to present CPUs. As a result the performance
of the device is suboptimal.
To fix this spread the interrupt vectors in two stages:
1) Spread as many interrupts as possible among the present CPUs
2) Spread the remaining vectors among non present CPUs
On a 8 core system, where CPU 0-3 are present and CPU 4-7 are not present,
for a device with 4 queues the resulting interrupt affinity is:
1) Before 84676c1f21 ("genirq/affinity: assign vectors to all possible CPUs")
irq 39, cpu list 0
irq 40, cpu list 1
irq 41, cpu list 2
irq 42, cpu list 3
2) With 84676c1f21 ("genirq/affinity: assign vectors to all possible CPUs")
irq 39, cpu list 0-2
irq 40, cpu list 3-4,6
irq 41, cpu list 5
irq 42, cpu list 7
3) With the refined vector spread applied:
irq 39, cpu list 0,4
irq 40, cpu list 1,6
irq 41, cpu list 2,5
irq 42, cpu list 3,7
On a 8 core system, where all CPUs are present the resulting interrupt
affinity for the 4 queues is:
irq 39, cpu list 0,1
irq 40, cpu list 2,3
irq 41, cpu list 4,5
irq 42, cpu list 6,7
This is independent of the number of CPUs which are online at the point of
initialization because in such a system the offline CPUs can be easily
onlined afterwards, while in non-present CPUs need to be plugged physically
or virtually which requires external interaction.
The downside of this approach is that in case of physical hotplug the
interrupt vector spreading might be suboptimal when CPUs 4-7 are physically
plugged. Suboptimal from a NUMA point of view and due to the single target
nature of interrupt affinities the later plugged CPUs might not be targeted
by interrupts at all.
Though, physical hotplug systems are not the common case while the broken
ACPI table disease is wide spread. So it's preferred to have as many
interrupts as possible utilized at the point where the device is
initialized.
Block multi-queue devices like NVME create a hardware queue per possible
CPU, so the goal of commit 84676c1f21 to assign one interrupt vector per
possible CPU is still achieved even with physical/virtual hotplug.
[ tglx: Changed from online to present CPUs for the first spreading stage,
renamed variables for readability sake, added comments and massaged
changelog ]
Reported-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Link: https://lkml.kernel.org/r/20180308105358.1506-5-ming.lei@redhat.com
To support two stage irq vector spreading, it's required to add a starting
point to the spreading function. No functional change, just preparatory
work for the actual two stage change.
[ tglx: Renamed variables, tidied up the code and massaged changelog ]
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Link: https://lkml.kernel.org/r/20180308105358.1506-4-ming.lei@redhat.com
No functional change, just prepare for converting to 2-stage irq vector
spreading.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Link: https://lkml.kernel.org/r/20180308105358.1506-3-ming.lei@redhat.com
The following patches will introduce two stage irq spreading for improving
irq spread on all possible CPUs.
No functional change.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Link: https://lkml.kernel.org/r/20180308105358.1506-2-ming.lei@redhat.com
When the allocation of node_to_possible_cpumask fails, then
irq_create_affinity_masks() returns with a pointer to the empty affinity
masks array, which will cause malfunction.
Reorder the allocations so the masks array allocation comes last and every
failure path returns NULL.
Fixes: 9a0ef98e18 ("genirq/affinity: Assign vectors to all present CPUs")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Add a new pointer argument to cpuidle_select() and to the ->select
cpuidle governor callback to allow a boolean value indicating
whether or not the tick should be stopped before entering the
selected state to be returned from there.
Make the ladder governor ignore that pointer (to preserve its
current behavior) and make the menu governor return 'false" through
it if:
(1) the idle exit latency is constrained at 0, or
(2) the selected state is a polling one, or
(3) the expected idle period duration is within the tick period
range.
In addition to that, the correction factor computations in the menu
governor need to take the possibility that the tick may not be
stopped into account to avoid artificially small correction factor
values. To that end, add a mechanism to record tick wakeups, as
suggested by Peter Zijlstra, and use it to modify the menu_update()
behavior when tick wakeup occurs. Namely, if the CPU is woken up by
the tick and the return value of tick_nohz_get_sleep_length() is not
within the tick boundary, the predicted idle duration is likely too
short, so make menu_update() try to compensate for that by updating
the governor statistics as though the CPU was idle for a long time.
Since the value returned through the new argument pointer of
cpuidle_select() is not used by its caller yet, this change by
itself is not expected to alter the functionality of the code.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Since the subsequent changes will need a TICK_USEC definition
analogous to TICK_NSEC, rename the existing TICK_USEC as
USER_TICK_USEC, update its users and redefine TICK_USEC
accordingly.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Currently <linux/slab.h> #includes <linux/kmemleak.h> for no obvious
reason. It looks like it's only a convenience, so remove kmemleak.h
from slab.h and add <linux/kmemleak.h> to any users of kmemleak_* that
don't already #include it. Also remove <linux/kmemleak.h> from source
files that do not use it.
This is tested on i386 allmodconfig and x86_64 allmodconfig. It would
be good to run it through the 0day bot for other $ARCHes. I have
neither the horsepower nor the storage space for the other $ARCHes.
Update: This patch has been extensively build-tested by both the 0day
bot & kisskb/ozlabs build farms. Both of them reported 2 build failures
for which patches are included here (in v2).
[ slab.h is the second most used header file after module.h; kernel.h is
right there with slab.h. There could be some minor error in the
counting due to some #includes having comments after them and I didn't
combine all of those. ]
[akpm@linux-foundation.org: security/keys/big_key.c needs vmalloc.h, per sfr]
Link: http://lkml.kernel.org/r/e4309f98-3749-93e1-4bb7-d9501a39d015@infradead.org
Link: http://kisskb.ellerman.id.au/kisskb/head/13396/
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reported-by: Michael Ellerman <mpe@ellerman.id.au> [2 build failures]
Reported-by: Fengguang Wu <fengguang.wu@intel.com> [2 build failures]
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Wei Yongjun <weiyongjun1@huawei.com>
Cc: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: John Johansen <john.johansen@canonical.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KASAN splats indicate that in some cases we free a live mm, then
continue to access it, with potentially disastrous results. This is
likely due to a mismatched mmdrop() somewhere in the kernel, but so far
the culprit remains elusive.
Let's have __mmdrop() verify that the mm isn't live for the current
task, similar to the existing check for init_mm. This way, we can catch
this class of issue earlier, and without requiring KASAN.
Currently, idle_task_exit() leaves active_mm stale after it switches to
init_mm. This isn't harmful, but will trigger the new assertions, so we
must adjust idle_task_exit() to update active_mm.
Link: http://lkml.kernel.org/r/20180312140103.19235-1-mark.rutland@arm.com
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull printk updates from Petr Mladek:
- Add info about loaded kdump kernel into the dump stack header
- Move dump-stack related code from printk.c to lib/dump_stack.c
- Write message about suspending consoles in KERN_INFO log level
* 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
printk: change message to pr_info
printk: move dump stack related code to lib/dump_stack.c
print kdump kernel loaded status in stack dump
Pull trivial tree updates from Jiri Kosina.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
kfifo: fix inaccurate comment
tools/thermal: tmon: fix for segfault
net: Spelling s/stucture/structure/
edd: don't spam log if no EDD information is present
Documentation: Fix early-microcode.txt references after file rename
tracing: Block comments should align the * on each line
treewide: Fix typos in printk
GenWQE: Fix a typo in two comments
treewide: Align function definition open/close braces
Make cpuidle_idle_call() decide whether or not to stop the tick.
First, the cpuidle_enter_s2idle() path deals with the tick (and with
the entire timekeeping for that matter) by itself and it doesn't need
the tick to be stopped beforehand.
Second, to address the issue with short idle duration predictions
by the idle governor after the tick has been stopped, it will be
necessary to change the ordering of cpuidle_select() with respect
to tick_nohz_idle_stop_tick(). To prepare for that, put a
tick_nohz_idle_stop_tick() call in the same branch in which
cpuidle_select() is called.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Push the decision whether or not to stop the tick somewhat deeper
into the idle loop.
Stopping the tick upfront leads to unpleasant outcomes in case the
idle governor doesn't agree with the nohz code on the duration of the
upcoming idle period. Specifically, if the tick has been stopped and
the idle governor predicts short idle, the situation is bad regardless
of whether or not the prediction is accurate. If it is accurate, the
tick has been stopped unnecessarily which means excessive overhead.
If it is not accurate, the CPU is likely to spend too much time in
the (shallow, because short idle has been predicted) idle state
selected by the governor [1].
As the first step towards addressing this problem, change the code
to make the tick stopping decision inside of the loop in do_idle().
In particular, do not stop the tick in the cpu_idle_poll() code path.
Also don't do that in tick_nohz_irq_exit() which doesn't really have
enough information on whether or not to stop the tick.
Link: https://marc.info/?l=linux-pm&m=150116085925208&w=2 # [1]
Link: https://tu-dresden.de/zih/forschung/ressourcen/dateien/projekte/haec/powernightmares.pdf
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Prepare the scheduler tick code for reworking the idle loop to
avoid stopping the tick in some cases.
The idea is to split the nohz idle entry call to decouple the idle
time stats accounting and preparatory work from the actual tick stop
code, in order to later be able to delay the tick stop once we reach
more power-knowledgeable callers.
Move away the tick_nohz_start_idle() invocation from
__tick_nohz_idle_enter(), rename the latter to
__tick_nohz_idle_stop_tick() and define tick_nohz_idle_stop_tick()
as a wrapper around it for calling it from the outside.
Make tick_nohz_idle_enter() only call tick_nohz_start_idle() instead
of calling the entire __tick_nohz_idle_enter(), add another wrapper
disabling and enabling interrupts around tick_nohz_idle_stop_tick()
and make the current callers of tick_nohz_idle_enter() call it too
to retain their current functionality.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
It may be useful for an architecture to override the definitions of the
COMPAT_SYSCALL_DEFINE0() and __COMPAT_SYSCALL_DEFINEx() macros in
<linux/compat.h>, in particular to use a different calling convention
for syscalls. This patch provides a mechanism to do so, based on the
previously introduced CONFIG_ARCH_HAS_SYSCALL_WRAPPER. If it is enabled,
<asm/sycall_wrapper.h> is included in <linux/compat.h> and may be used
to define the macros mentioned above. Moreover, as the syscall calling
convention may be different if CONFIG_ARCH_HAS_SYSCALL_WRAPPER is set,
the compat syscall function prototypes in <linux/compat.h> are #ifndef'd
out in that case.
As some of the syscalls and/or compat syscalls may not be present,
the COND_SYSCALL() and COND_SYSCALL_COMPAT() macros in kernel/sys_ni.c
as well as the SYS_NI() and COMPAT_SYS_NI() macros in
kernel/time/posix-stubs.c can be re-defined in <asm/syscall_wrapper.h> iff
CONFIG_ARCH_HAS_SYSCALL_WRAPPER is enabled.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180405095307.3730-5-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
By renaming the functions we can get rid of the skip parameter
and have better code redability. It makes zero sense to have
things such as:
rq_clock_skip_update(rq, false)
When the skip request is in fact not going to happen. Ever. Rename
things such that we end up with:
rq_clock_skip_update(rq)
rq_clock_cancel_skipupdate(rq)
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Cc: matt@codeblueprint.co.uk
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/20180404161539.nhadkff2aats74jh@linux-n805
Signed-off-by: Ingo Molnar <mingo@kernel.org>
