Another quiet release in terms of features, though several of the
drivers got quite a bit of work and there were a lot of general changes
resulting from Morimoto-san's ongoing cleanup work.
- As ever, lots of hard work by Morimoto-san cleaning up the code and
making it more consistent.
- Many improvements in the Intel drivers including a wide range of
quirks and bug fixes.
- A KUnit testsuite for the topology code.
- Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured
nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro
- Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmAtZ7cACgkQJNaLcl1U
h9DD5Af/eeERQ2uVOqtw0If+XL1xRYe6RewgDoNcO/l/5WxBLrBH6NbEf0OwNJeg
vzZAkUBtxmx6XiW2M/h+4ucW1OPcg5IzxIWTHfGDMlKIxzb0jgWugRnJ7sdTnOs3
c+QHnvuOT7QzZBviAIkc5uZ5thAImYF8zDyKoGF5llztmnBYymtgpnvnRNZGM0ou
76oUzSvkCFI2b0Yf6bpGok2nBVlOu82HSHOUKjXVWk+LAeiivlYGOEZpdIKEe3S8
u6atQJ29XRr52Yuc2z4xnFQTW1cIDlwj2Fk5x/z8hX+5nRhNSGuIv1l5m7TfBj3e
mCO9cltKZxly0NXysgekn95JHwwwkA==
=MJSb
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.12' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.12
Another quiet release in terms of features, though several of the
drivers got quite a bit of work and there were a lot of general changes
resulting from Morimoto-san's ongoing cleanup work.
- As ever, lots of hard work by Morimoto-san cleaning up the code and
making it more consistent.
- Many improvements in the Intel drivers including a wide range of
quirks and bug fixes.
- A KUnit testsuite for the topology code.
- Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured
nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro
- Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers.
Hi All,
Here is a patch series adding quirks with device-specific settings for
4 more tablet / 2-in-1 models.
Regards,
Hans
Hans de Goede (4):
ASoC: Intel: bytcr_rt5640: Add quirk for the Estar Beauty HD MID 7316R tablet
ASoC: Intel: bytcr_rt5640: Add quirk for the Voyo Winpad A15 tablet
ASoC: Intel: bytcr_rt5651: Add quirk for the Jumper EZpad 7 tablet
ASoC: Intel: bytcr_rt5640: Add quirk for the Acer One S1002 tablet
sound/soc/intel/boards/bytcr_rt5640.c | 37 +++++++++++++++++++++++++++
sound/soc/intel/boards/bytcr_rt5651.c | 13 ++++++++++
2 files changed, 50 insertions(+)
--
2.30.1
In case DPCM runtime has multiple CPU DAIs, dpcm_init_runtime_hw() is
called multiple times, once for each CPU DAI. This will lead to
ignoring hw limits of all but the last DAI.
Fix this by moving soc_pcm_hw_init() up by one level to
dpcm_init_runtime_hw().
Fixes: 140f553d12 ("ASoC: soc-pcm: fix hwparams min/max init for dpcm")
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210216172251.3023723-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Acer One S1002 tablet is using an analog mic on IN1 and has
its jack-detect connected to JD2_IN4N, instead of using the default
IN3 for its internal mic and JD1_IN4P for jack-detect.
Note it is also using AIF2 instead of AIF1 which is somewhat unusual,
this is correctly advertised in the ACPI CHAN package, so the speakers
do work without the quirk.
Add a quirk for the mic and jack-detect settings.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a DMI quirk for the Jumper EZpad 7 tablet, this tablet has
a jack-detect switch which reads 1/high when a jack is inserted,
rather then using the standard active-low setup which most
jack-detect switches use. All other settings are using the defaults.
Add a DMI-quirk setting the defaults + the BYT_RT5651_JD_NOT_INV
flags for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Voyo Winpad A15 tablet uses a Bay Trail (non CR) SoC, so it is using
SSP2 (AIF1) and it mostly works with the defaults. But instead of using
DMIC1 it is using an analog mic on IN1, add a quirk for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Estar Beauty HD MID 7316R tablet almost fully works with out default
settings. The only problem is that it has only 1 speaker so any sounds
only playing on the right channel get lost.
Add a quirk for this model using the default settings + MONO_SPEAKER.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When runtime is initialized with dpcm_init_runtime_hw(), some of the
min/max calculations assume that defaults are set. For example
calculation of channel min/max values may be done using zero-initialized
data and soc_pcm_hw_update_chan() will always return max-channels of 0
in this case. This will result in failure to open the PCM at all.
Fix the issue by calling soc_pcm_hw_init() before calling any
soc_pcm_hw_update_*() functions.
Remove the conditional code on runtime->hw.formats as this field
is anyways set in soc_pcm_hw_init().
Fixes: 6cb56a4549 ("ASoC: soc-pcm: add soc_pcm_hw_update_chan()")
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210214220414.2876690-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HP Spectre x360 14 model (PCI SSID 103c:87f7) seems requiring a unique
setup for its external amp: the GPIO0 needs to be toggled on and off
shortly at each device initialization via runtime PM.
This patch implements that workaround as well as the model option
string, so that users with other devices may try the same workaround
more easily.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210633
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210215082540.4520-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
BOSS GP-10 with 0582:0185 requires the similar quirk to make the
implicit feedback working like other BOSS devices.
Reported-by: Keith Milner <kamilner@superlative.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210214154251.10750-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add one more HD Audio PCI ID for CometLake-H PCH.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210212151022.2568567-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have soc_pcm_hw_update_xxx() now.
This patch creates same function for format.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/87pn1g90oa.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have soc_pcm_hw_update_rate() now.
This patch creates same function for chan.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/87r1lw90oo.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To update hw, we need to follow setting order
1) set hw->rates
2) call snd_pcm_limit_hw_rates()
3) update hw->rate_min/max
To avoid random settings, this patch adds new soc_pcm_hw_update_rate()
and share updating code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/87sg6c90qv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This callback structure has never been used and it is not clear why it
was added in the first place. Remove it to clear up the code a little.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210211172106.16258-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With recent SOF 1.7 pre-releases, kernel has been emitting following
warnings at probe:
[10006.645216] sof-audio-pci 0000:00:1f.3: warn: FW ABI is more recent than kernel
[10006.652137] sof-audio-pci 0000:00:1f.3: warn: topology ABI is more recent than kernel
The warnings are emitted due to increase of the patch-level in firmware
mainline (to 3.17.1). But the patch level should not be considered even
in the strict ABI check, so modify the kernel side logic that makes the
check and only consider the major.minor components.
BugLink: https://github.com/thesofproject/linux/issues/2647
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210211172440.2371447-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is recommended to not specifiy clocks property in an endpoint subnode.
This series moves clocks to device node.
However after moving the clocks to device node, the audio playback or
capture fails. The specified clock is not actually getting enabled and
hence the failure is seen. There seems to be a bug in simple-card-utils.c
where clock handle is not assigned when parsing clocks from device node.
Fix the same and revert original change which actually added clocks
property in endpoint subnode. Also update Jetson AGX Xavier DT where the
usage is found.
Sameer Pujar (3):
ASoC: simple-card-utils: Fix device module clock
Revert "ASoC: audio-graph-card: Add clocks property to endpoint node"
arm64: tegra: Move clocks from RT5658 endpoint to device node
.../devicetree/bindings/sound/audio-graph-port.yaml | 3 ---
arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 2 +-
sound/soc/generic/simple-card-utils.c | 13 ++++++-------
3 files changed, 7 insertions(+), 11 deletions(-)
--
2.7.4
Qualcomm LPASS (Low Power Audio SubSystem) has internal codec
TX macro block which is used for connecting with external
Soundwire TX Codecs like WCD938x.
This patch adds support to the codec part of the TX Macro block
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210211122735.5691-7-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This binding is for LPASS has internal codec TX macro which is
for connecting with Soundwire TX codecs like WCD938x.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210211122735.5691-6-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
LPASS RX Codec Macro is available in Qualcomm LPASS (Low Power Audio SubSystem).
This is used for connecting with SoundWire devices like WCD938x Codecs to provide
headphone/ear/lineout functionality.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210211122735.5691-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This binding is for LPASS has internal codec RX macro which is
for connecting with SoundWire RX codecs like WCD938x.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210211122735.5691-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
An endpoint is not a device and it is recommended to use clocks property
in the device node. Hence reverting the original change.
Fixes: 531e5b7abb ("ASoC: audio-graph-card: Add clocks property to endpoint node")
Suggested-by: Rob Herring <robh@kernel.org>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1612939421-19900-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If "clocks = <&xxx>" is specified from the CPU or Codec component
device node, the clock is not getting enabled. Thus audio playback
or capture fails.
Fix this by populating "simple_dai->clk" field when clocks property
is specified from device node as well. Also tidy up by re-organising
conditional statements of parsing logic.
Fixes: bb6fc620c2 ("ASoC: simple-card-utils: add asoc_simple_card_parse_clk()")
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1612939421-19900-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some users reported the kernel WARNING with stack traces from
hdmi_pcm_close(), and it's the line checking the per_cvt->assigned
flag. This used to be a valid check in the past because the flag was
turned on/off only at opening and closing a PCM stream. Meanwhile,
since the introduction of the silent-stream mode, this flag may be
turned on/off at the monitor connection/disconnection time, which
isn't always associated with the PCM open/close. Hence this may lead
to the inconsistent per_cvt->assigned flag at closing.
As the check itself became almost useless and confuses users as if it
were a serious problem, just drop the check.
Fixes: b1a5039759 ("ALSA: hda/hdmi: fix silent stream for first playback to DP")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210987
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210211083139.29531-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
SoundWire machine drivers make a heavy use of component prefixes to
uniquify control names. This however results in errors when looking
for widgets or pins. This patchset suggests two solutions but feedback
or suggestions on how to take the prefix into account would be
welcome.
Bard Liao (1):
ASoC: Intel: boards: max98373: get dapm from cpu_dai
Shuming Fan (1):
ASoC: dapm: use component prefix when checking widget names
sound/soc/intel/boards/sof_maxim_common.c | 5 +++--
sound/soc/soc-dapm.c | 13 ++++++++++++-
2 files changed, 15 insertions(+), 3 deletions(-)
--
2.25.1
HP Spectre x360 convertible devices rely on a mixed SoundWire+DMIC
configuration which wasn't well supported. This lead to the discovery
that we missed the TGL_HDMI quirk on a number of Dell devices, the
addition of DMIC autodetection (based on NHLT tables), the addition of
new component strings needed by UCM, and work-arounds due to
problematic DSDT tables.
Changes since v1:
Rebase to remove first three patches already merged.
Fix allmodconfig issues (undeclared kernel parameter)
Bard Liao (1):
ASoC: intel: sof_sdw: add trace for dai links
Guennadi Liakhovetski (1):
ASoC: SOF: Intel: HDA: don't keep a temporary variable
Pierre-Louis Bossart (8):
ASoC: Intel: sof_sdw: reorganize quirks by generation
ASoC: Intel: sof-sdw: indent and add quirks consistently
ASoC: Intel: sof_sdw: add quirk for HP Spectre x360 convertible
ASoC: Intel: sof_sdw: add mic:dmic and cfg-mics component strings
ASoC: Intel: soc-acpi: add ACPI matching table for HP Spectre x360
ASoC: SOF: Intel: SoundWire: refine ACPI match
ASoC: SOF: Intel: detect DMIC number in SoundWire mixed config
ASoC: SOF: Intel: hda: add dev_dbg() when DMIC number is overridden
Rander Wang (1):
ASoC: Intel: sof_sdw: detect DMIC number based on mach params
sound/soc/intel/boards/sof_sdw.c | 134 ++++++-----
.../intel/common/soc-acpi-intel-tgl-match.c | 20 ++
sound/soc/sof/intel/hda.c | 212 ++++++++++++------
3 files changed, 244 insertions(+), 122 deletions(-)
--
2.25.1
With current delayed probe implementation, sof_probe_complete is not
called in case of errors. And as this function is responsible for
decrementing runtime pm usage counter, this will result in following
problem:
- probe driver in conditions where probe will fail (to force
the condition on Intel SOF systems, set
"snd_sof_intel_hda_common.codec_mask=0")
- unload driver (runtime-pm usage_count is leaked)
- fix the issue by installing missing fw, modifying module parameters,
etc actions
- try to load driver again -> success, probe ok
-> device never enters runtime suspend
Fix the issue by storing result of delayed probe to a state variable and
providing new snd_sof_device_probe_completed() to be queried from SOF
PCI/ACPI/OF drivers.
If probe never completed successfully, runtime PM was not set up and
thus at remove(), we should not increment usage count anymore.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Link: https://lore.kernel.org/r/20210210105237.2179273-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This log message should be a debug message, because it
doesn't return directly but continue next loop.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/1612771965-5776-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It's useful for debug and system integration to show cases where we
ignore the number of microphones reported by NHLT.
Suggested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
fixup_tplg_name() doesn't need to keep the string, allocated for
filename - it's temporary.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pinmux allows for 2 SoundWire links to be enabled along with
DMICs. This was the default configuration on the TGL-RVP.
One issue with this configuration is that we don't have a means to
automatically detect how many DMICs are used, which in turn requires
the user to manually rename the topology file required on a platform.
This was borderline acceptable for Intel RVPs, but now that this
configuration is present in HP devices we need to automate the
process.
This patch makes use of the NHLT information and will pass the DMIC
number to the machine driver as a parameter. A follow-up patch will
expose the DMIC number to userspace/UCM with the configuration strings.
The Google devices do make use of DMICs instead of SoundWire link 2
and 3, but their topology is unique enough that they do not need any
NHTL support or topology renaming.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have existing platforms where the wrong machine is selected. We
need to make sure the number of devices reported on a link matches
what we expect for a link descriptor. This helps avoid using the
TGL-RVP configuration for an HP platform or vice-versa, depending on
the order in which they are inserted in the table.
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This device only has a single amplifier on link1, so we need a
dedicated entry to find a match.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We create dai links dynamically, so it is not easy to know what dai
links are created. So adding trace for dai link name and id.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current driver create DMIC dai based on quirk for each platforms,
so we need to add quirk for new platforms. Now driver reports DMIC
number to machine driver and machine driver can create DMIC dai based
on this information. The old check is reserved for some platforms
may be failed to set the DMIC number in BIOS.
Reviewed-by: Bard Liao <bard.liao@intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
UCM needs to know which microphone is used (dmic or RT715-based),
let's add the information in the component string.
Note the slight change from HDAudio platforms where 'cfg-dmics' was
used. 'cfg-mics' is used here with the intent that this component
string describes either the number of PCH-attached microphones or the
number of RT715-attached ones (the assumption is that the two
configurations are mutually exclusive).
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the same style for all quirks to avoid misses and errors
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The quirk table is a mess, let's reorganize it by generation before
making sure that the quirks are consistent for each generation.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use explicit number to define elem_type enum instead of using
SOF_IPC_EXT_*.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Karol Trzciński <karolx.trzcinski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210208232149.58899-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify hda_dsp_d0i3_work() by returning immediately from it
if D0i3 cannot be set.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Keyon Jie <yang.jie@intel.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210208232149.58899-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
hda_dsp_dump_skl() is never used and hda_dsp_get_status_skl() is
only called from that function. Remove both functions.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Keyon Jie <yang.jie@intel.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210208232149.58899-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These are negative error return values, printing them as hex is annoying
and not beneficial. Switch back to signed type to make error lookup
simpler.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210208232149.58899-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
