Pull ARM new SoC support from Arnd Bergmann:
"This adds initial support for two SoC families that have been under
review for a while. In both cases, the origonal idea was to have a
minimally functional version, but we ended up leaving out the clk
drivers that are still under review and will be merged through the
corresponding subsystem tree.
The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and
based on the 32-bit NPCM7xx family but is now getting added to
arch/arm64 as well.
Sunplus SP7021, also known as Plus1, is a general-purpose
System-in-Package design based on the 32-bit Cortex-A7 SoC on the main
chip, plus an I/O chip and memory in the same"
* tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
MAINTAINERS: rectify entry for ARM/NUVOTON NPCM ARCHITECTURE
arm64: defconfig: Add Nuvoton NPCM family support
arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
arm64: dts: nuvoton: Add initial NPCM8XX device tree
arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
dt-bindings: arm: npcm: Add maintainer
reset: npcm: Add NPCM8XX support
dt-bindings: reset: npcm: Add support for NPCM8XX
reset: npcm: using syscon instead of device data
ARM: dts: nuvoton: add reset syscon property
dt-bindings: reset: npcm: add GCR syscon property
dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
dt-bindings: watchdog: npcm: Add npcm845 compatible string
dt-bindings: timer: npcm: Add npcm845 compatible string
ARM: dts: Add Sunplus SP7021-Demo-V3 board device tree
ARM: sp7021_defconfig: Add Sunplus SP7021 defconfig
ARM: sunplus: Add initial support for Sunplus SP7021 SoC
irqchip: Add Sunplus SP7021 interrupt controller driver
...
Some configs can obviously be removed when sync'ing with savedefconfig, as
follows:
- config SECCOMP was changed to def_bool y in commit 282a181b1a ("
seccomp: Move config option SECCOMP to arch/Kconfig"), so no need to
explicitly enable in the defconfig.
- config MAILBOX is already selected by some drivers enabled in the
defconfig, so no need to explicitly enable.
- config QRTR was enabled in the defconfig from commit 1bdf91fd2a ("
arm64: defconfig: Enable Qualcomm QRTR"). However until many kernel
versions later in commit 231a136fdf ("arm64: defconfig: enable ath11k
driver"), no driver depended on config QRTR - not for building anyway.
In commit 231a136fdf, config ATH11K_PCI was enabled and this selects
config QRTR, so there is no need to explicitly enable in the defconfig.
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1658827473-121156-1-git-send-email-john.garry@huawei.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A number of Kconfig options have moved around in the defconfig
file over time. Move them to the place that they 'savedefconfig'
puts them at now, to better see which options are now gone
for some reason.
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
CONFIG_DEBUG_INFO is now implicitly selected if one picks one of the
explicit options that could be DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT,
DEBUG_INFO_DWARF4, DEBUG_INFO_DWARF5.
This was actually not what I had in mind when I suggested making
it a 'choice' statement, but it's too late to change again now,
and the Kconfig logic is more sensible in the new form.
Change any defconfig file that had CONFIG_DEBUG_INFO enabled
but did not pick DWARF4 or DWARF5 explicitly to now pick the toolchain
default.
Fixes: f9b3cd2457 ("Kconfig.debug: make DEBUG_INFO selectable from a choice")
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm ARM64 defconfig more updates for v5.20
This enables a few of the core drivers needed to boot the 8cx Gen 3
platform and demotes the Qualcomm USB PHY drivers to modules, as they
don't need to be builtin.
* tag 'qcom-arm64-defconfig-for-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Demote Qualcomm USB PHYs to modules
arm64: defconfig: Enable Qualcomm SC8280XP providers
Link: https://lore.kernel.org/r/20220720230140.2113129-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm ARM64 defconfig updates for v5.20
This enables the drivers for the Light Pulse Generator and Bandwidth
Monitor hardware, found in a wide variety of Qualcomm PMICs and SoCs.
It enables interconnect providers for MSM8996, QCS404 and SC7180 and it
enables the USB PHYs for the QCS404 platform.
* tag 'qcom-arm64-defconfig-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: enable Qualcomm Bandwidth Monitor
arm64: defconfig: Enable qcom interconnect drivers
arm64: defconfig: Enable qcom ss & hs usb phy
arm64: defconfig: enable Qualcomm LPG leds driver
Link: https://lore.kernel.org/r/20220712031812.1275182-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM64-based SoCs defconfig changes
for 5.10, please pull the following:
- Nicolas enables CONFIG_DRM_V3D in order for the Raspberry Pi 4 systems
to load the proper GPU module driver
- William enables the newly introduced CONFIG_ARCH_BCMBCA 64-bit ARM
counterpart to support the newly added BCA SocS
* tag 'arm-soc/for-5.20/defconfig-arm64' of https://github.com/Broadcom/stblinux:
arm64: defconfig: Enable DRM_V3D
arm64: defconfig: enable bcmbca soc support
Link: https://lore.kernel.org/r/20220711164451.3542127-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
arm64: tegra: Default configuration updates for v5.20-rc1
Updates the arm64 default configuration to enable the OPE driver as a
module.
* tag 'tegra-for-5.20-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Build Tegra OPE module
Link: https://lore.kernel.org/r/20220708185608.676474-8-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable gpio-fan support as this is needed by phyBOARD-Polis-i.MX8M Mini.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Output Processing Engine (OPE) module is a client of AHUB on Tegra210
and later generations of Tegra SoCs. Enable the driver build to use
this in audio path.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable CONFIG_ARCH_BCMBCA in defconfig. This config can be used to build
a basic kernel for arm64 based Broadcom Broadband SoC booting to
console.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Qualcomm ARM64 defconfig updates for v5.19
This enables the GPI DMA driver, providing access to I2C and SPI
controllers that are setup for shared ownership. The PCIe Gen2 PHY
provides PCI support on the QCS405 platform, among others. The PMIC
watchdog, concell and ADC5 ThermalMonitor drivers provides housekeeping
services on a range of different platforms.
The Display and Video clock controllers for SM8250 are enabled, as is
the audio RX/TX macros and the WCD9335 audio codec driver.
Lastly the Ath11k driver, used on a variety of modern boards and the
FastRPC driver, which provides an interface for computational offloading
on the Hexagon cores, are enabled.
All drivers, except the SM8250 Display and Video clock controller
drivers are enabled as modules. The two clock controllers provides
power-domains and must be builtin to reduce the risk of probe deferral
happening (and being ignored) after late initcall.
* tag 'qcom-arm64-defconfig-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable Qualcomm GPI DMA Driver
arm64: defconfig: Enable Qualcomm PCIe Gen2 PHY
arm64: defconfig: Enable SM8250 video clock controller
arm64: defconfig: Enable PM8916 watchdog driver
arm64: defconfig: enable ath11k driver
arm64: defconfig: Enable some Qualcomm drivers
arm64: defconfig: reenable SM_DISPCC_8250
arm64: defconfig: enable wcd9335 codec as module
arm64: defconfig: enable Qualcomm RX and TX macro for SM8250 audio
Link: https://lore.kernel.org/r/20220509170158.311962-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX defconfig update for 5.19:
- Enable the WM8524 codec driver as module in arm64 defconfig for audio
support on imx8mn-evk board.
- Enable the ADC part of the STMPE MFD in imx_v6_v7_defconfig, as the
SoM Apalis/Colibri iMX6 use the ADC of a STMPE 811.
* tag 'imx-defconfig-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Enable the WM8524 codec driver
ARM: imx_v6_v7_defconfig: Enable the ADC part of the STMPE MFD
Link: https://lore.kernel.org/r/20220508033843.2773685-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
TI K3 defconfig updates for v5.19
* Enable TIDSS and Display Port related configs
* Enable Cadence Torrent PHY for Display Port
* tag 'ti-k3-config-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
arm64: defconfig: Enable configs for DisplayPort on J721e
Link: https://lore.kernel.org/r/88cd734e-47a7-4307-c119-8f6ec6c40452@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
arm64: tegra: Default configuration updates for v5.19-rc1
This enables the driver for the new ASRC audio block that is found on
Tegra186 and later.
* tag 'tegra-for-5.19-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Build Tegra ASRC module
Link: https://lore.kernel.org/r/20220506143005.3916655-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas ARM defconfig updates for v5.19 (take two)
- Enable support for the Renesas RZ/G2UL and RZ/V2M SoCs in the arm64
defconfig,
* tag 'renesas-arm-defconfig-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable Renesas RZ/V2M SoC
arm64: defconfig: Enable ARCH_R9A07G043
Link: https://lore.kernel.org/r/cover.1651828601.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
imx8mn-evk has a WM8524 codec.
Enable the WM8524 codec driver so that audio can be functional
on this board.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Renesas ARM defconfig updates for v5.19
- Enable support for the Renesas RZ/V2L SoC and the Maxim MAX96712
Quad GMSL2 Deserializer in the arm64 defconfig,
- Refresh shmobile_defconfig for v5.18-rc1.
* tag 'renesas-arm-defconfig-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Refresh for v5.18-rc1
arm64: defconfig: Enable Maxim MAX96712 Quad GMSL2 Deserializer support
arm64: defconfig: Enable ARCH_R9A07G054
Link: https://lore.kernel.org/r/cover.1650638503.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Asynchronous Sample Rate Converter (ASRC) module is a client of AHUB on
Tegra186 and later SoCs. To use this module enable the driver build.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
