ARM: new SoC support for 6.0

This adds initial support for two SoC families that have been under review for a while. In both cases, the origonal idea was to have a minimally functional version, but we ended up leaving out the clk drivers that are still under review and will be merged through the corresponding subsystem tree. The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and based on the 32-bit NPCM7xx family but is now getting added to arch/arm64 as well. Sunplus SP7021, also known as Plus1, is a general-purpose System-in-Package design based on the 32-bit Cortex-A7 SoC on the main chip, plus an I/O chip and memory in the same -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmLo+24ACgkQmmx57+YA GNkPVw//XAC/uK7WR4oz1D1YaPPNhEvFa6hV1gjGB7Iif72SzyDJmC+36MATU/AY neQjCOLJMhxI0hpDGY9nLYe+aP1C6vD32zsjffjt/+s9em+YZZCUkRJuQ5xO3fID Uk8ZAnCIcOqX9sjXr9ChW8irlcWFbKzhgWXnPqwQmycIaE7QVz1wx32dbc64YuAK S+290U8wbj8bukr33TyZPMdYlfqNU3c1W+dCaeVsQlX1juoHEV3stmIjslRefd6X Jre22YJE41VlPufZej76nHXuVnjKf54Oi347TcbPOWNDtEAIESt3mzKy+zICBT2p v01rNBf0SogyOtSbWDPTFCAH9W9hujSOJIUOWpbOLaPdfElXxcoTBwj2e2LMoW0k ke7YR1m6FKDam5GFU9Oe98CWIiVm/GnTA5mnhhETU1QTXQ3KeZ+Z8X779YuSWPv9 kJuOPRSk9NdcfRtxZz1vpCvhv/2hBbeBuz+GZi3bisMWdvVqS3lFqVbr6kziQbJZ kE6KJH48FdL0VLVvuy+aNSF2umLT42b+5+cmQFuP2zePQgo1DEMKEtFXpZjQJbha 3iu3sHnieOFMLcbNzbqSz2im3yYNBjl1M5qoGEXaw3Rkzqiht0kMNvAa4LmAejbh E+5BIczwWNbaUKgToV1ij65O4a78Bw98m2SIS7awEZC5MW/nXYA= =7Id+ -----END PGP SIGNATURE----- Merge tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM new SoC support from Arnd Bergmann: "This adds initial support for two SoC families that have been under review for a while. In both cases, the origonal idea was to have a minimally functional version, but we ended up leaving out the clk drivers that are still under review and will be merged through the corresponding subsystem tree. The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and based on the 32-bit NPCM7xx family but is now getting added to arch/arm64 as well. Sunplus SP7021, also known as Plus1, is a general-purpose System-in-Package design based on the 32-bit Cortex-A7 SoC on the main chip, plus an I/O chip and memory in the same" * tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits) MAINTAINERS: rectify entry for ARM/NUVOTON NPCM ARCHITECTURE arm64: defconfig: Add Nuvoton NPCM family support arm64: dts: nuvoton: Add initial NPCM845 EVB device tree arm64: dts: nuvoton: Add initial NPCM8XX device tree arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string dt-bindings: arm: npcm: Add maintainer reset: npcm: Add NPCM8XX support dt-bindings: reset: npcm: Add support for NPCM8XX reset: npcm: using syscon instead of device data ARM: dts: nuvoton: add reset syscon property dt-bindings: reset: npcm: add GCR syscon property dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock dt-bindings: watchdog: npcm: Add npcm845 compatible string dt-bindings: timer: npcm: Add npcm845 compatible string ARM: dts: Add Sunplus SP7021-Demo-V3 board device tree ARM: sp7021_defconfig: Add Sunplus SP7021 defconfig ARM: sunplus: Add initial support for Sunplus SP7021 SoC irqchip: Add Sunplus SP7021 interrupt controller driver ...
2022-08-02 08:29:18 -07:00 · 2022-08-02 08:29:18 -07:00 · dd65b96492
commit dd65b96492
parent 3a829d267e bccd70a73d
40 changed files with 2012 additions and 36 deletions
--- a/Documentation/devicetree/bindings/arm/npcm/npcm.yaml
+++ b/Documentation/devicetree/bindings/arm/npcm/npcm.yaml
@ -8,6 +8,7 @@ title: NPCM Platforms Device Tree Bindings

 maintainers:
  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+  - Tomer Maimon <tmaimon77@gmail.com>

 properties:
  $nodename:
@ -26,4 +27,10 @@ properties:
              - nuvoton,npcm750-evb         # NPCM750 evaluation board
          - const: nuvoton,npcm750

+      - description: NPCM845 based boards
+        items:
+          - enum:
+              - nuvoton,npcm845-evb         # NPCM845 evaluation board
+          - const: nuvoton,npcm845
+
 additionalProperties: true
--- a/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml
+++ b/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml
@ -8,6 +8,7 @@ title: Global Control Registers block in Nuvoton SoCs

 maintainers:
  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+  - Tomer Maimon <tmaimon77@gmail.com>

 description:
  The Global Control Registers (GCR) are a block of registers in Nuvoton SoCs
@ -20,6 +21,7 @@ properties:
      - enum:
          - nuvoton,wpcm450-gcr
          - nuvoton,npcm750-gcr
+          - nuvoton,npcm845-gcr
      - const: syscon
      - const: simple-mfd

--- a/Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml
+++ b/Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml
@ -0,0 +1,29 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/sunplus,sp7021.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 Boards
+
+maintainers:
+  - qinjian <qinjian@cqplus1.com>
+
+description: |
+  ARM platforms using Sunplus SP7021, an ARM Cortex A7 (4-cores) based SoC.
+  Wiki: https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/overview
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - sunplus,sp7021-achip
+          - sunplus,sp7021-demo-v3
+      - const: sunplus,sp7021
+
+additionalProperties: true
+
+...
--- a/Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml
@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nuvoton,npcm845-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM8XX Clock Controller Binding
+
+maintainers:
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+description: |
+  Nuvoton Arbel BMC NPCM8XX contains an integrated clock controller, which
+  generates and supplies clocks to all modules within the BMC.
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm845-clk
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+    description:
+      See include/dt-bindings/clock/nuvoton,npcm8xx-clock.h for the full
+      list of NPCM8XX clock IDs.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    ahb {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@f0801000 {
+            compatible = "nuvoton,npcm845-clk";
+            reg = <0x0 0xf0801000 0x0 0x1000>;
+            #clock-cells = <1>;
+        };
+    };
+...
--- a/Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml
+++ b/Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml
@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sunplus,sp7021-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 SoC Clock Controller
+
+maintainers:
+  - Qin Jian <qinjian@cqplus1.com>
+
+properties:
+  compatible:
+    const: sunplus,sp7021-clkc
+
+  reg:
+    maxItems: 3
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    extclk: osc0 {
+      compatible = "fixed-clock";
+      #clock-cells = <0>;
+      clock-frequency = <27000000>;
+      clock-output-names = "extclk";
+    };
+
+    clkc: clock-controller@9c000004 {
+      compatible = "sunplus,sp7021-clkc";
+      reg = <0x9c000004 0x28>,
+            <0x9c000200 0x44>,
+            <0x9c000268 0x08>;
+      clocks = <&extclk>;
+      #clock-cells = <1>;
+    };
+
+...
--- a/Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml
@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/sunplus,sp7021-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 SoC Interrupt Controller
+
+maintainers:
+  - Qin Jian <qinjian@cqplus1.com>
+
+properties:
+  compatible:
+    items:
+      - const: sunplus,sp7021-intc
+
+  reg:
+    maxItems: 2
+    description:
+      Specifies base physical address(s) and size of the controller regs.
+      The 1st region include type/polarity/priority/mask regs.
+      The 2nd region include clear/masked_ext0/masked_ext1/group regs.
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+    description:
+      The first cell is the IRQ number, the second cell is the trigger
+      type as defined in interrupt.txt in this directory.
+
+  interrupts:
+    maxItems: 2
+    description:
+      EXT_INT0 & EXT_INT1, 2 interrupts references to primary interrupt
+      controller.
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    intc: interrupt-controller@9c000780 {
+        compatible = "sunplus,sp7021-intc";
+        reg = <0x9c000780 0x80>, <0x9c000a80 0x80>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&gic>;
+        interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, /* EXT_INT0 */
+                     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; /* EXT_INT1 */
+    };
+
+...
--- a/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml
@ -11,7 +11,9 @@ maintainers:

 properties:
  compatible:
-    const: nuvoton,npcm750-reset
+    enum:
+      - nuvoton,npcm750-reset        # Poleg NPCM7XX SoC
+      - nuvoton,npcm845-reset        # Arbel NPCM8XX SoC

  reg:
    maxItems: 1
@ -19,6 +21,10 @@ properties:
  '#reset-cells':
    const: 2

+  nuvoton,sysgcr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to access GCR registers.
+
  nuvoton,sw-reset-number:
    $ref: /schemas/types.yaml#/definitions/uint32
    minimum: 1
@ -31,6 +37,7 @@ required:
  - compatible
  - reg
  - '#reset-cells'
+  - nuvoton,sysgcr

 additionalProperties: false

@ -41,6 +48,7 @@ examples:
        compatible = "nuvoton,npcm750-reset";
        reg = <0xf0801000 0x70>;
        #reset-cells = <2>;
+        nuvoton,sysgcr = <&gcr>;
        nuvoton,sw-reset-number = <2>;
    };

--- a/Documentation/devicetree/bindings/reset/sunplus,reset.yaml
+++ b/Documentation/devicetree/bindings/reset/sunplus,reset.yaml
@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/sunplus,reset.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Sunplus SoC Reset Controller
+
+maintainers:
+  - Qin Jian <qinjian@cqplus1.com>
+
+properties:
+  compatible:
+    const: sunplus,sp7021-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    rstc: reset@9c000054 {
+      compatible = "sunplus,sp7021-reset";
+      reg = <0x9c000054 0x28>;
+      #reset-cells = <1>;
+    };
+
+...
--- a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.yaml
+++ b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.yaml
@ -8,12 +8,14 @@ title: Nuvoton NPCM7xx timer

 maintainers:
  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+  - Tomer Maimon <tmaimon77@gmail.com>

 properties:
  compatible:
    enum:
      - nuvoton,wpcm450-timer  # for Hermon WPCM450
      - nuvoton,npcm750-timer  # for Poleg NPCM750
+      - nuvoton,npcm845-timer  # for Arbel NPCM845

  reg:
    maxItems: 1
--- a/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt
@ -6,7 +6,8 @@ expiry.

 Required properties:
 - compatible      : "nuvoton,npcm750-wdt" for NPCM750 (Poleg), or
-                    "nuvoton,wpcm450-wdt" for WPCM450 (Hermon).
+                    "nuvoton,wpcm450-wdt" for WPCM450 (Hermon), or
+                    "nuvoton,npcm845-wdt" for NPCM845 (Arbel).
 - reg             : Offset and length of the register set for the device.
 - interrupts      : Contain the timer interrupt with flags for
                    falling edge.
--- a/19
+++ b/19
@ -2455,9 +2455,11 @@ F:	Documentation/devicetree/bindings/*/*npcm*
 F:	Documentation/devicetree/bindings/arm/npcm/*
 F:	arch/arm/boot/dts/nuvoton-npcm*
 F:	arch/arm/mach-npcm/
+F:	arch/arm64/boot/dts/nuvoton/
 F:	drivers/*/*npcm*
 F:	drivers/*/*/*npcm*
 F:	include/dt-bindings/clock/nuvoton,npcm7xx-clock.h
+F:	include/dt-bindings/clock/nuvoton,npcm845-clk.h

 ARM/NUVOTON WPCM450 ARCHITECTURE
 M:	Jonathan Neuschäfer <j.neuschaefer@gmx.net>
@ -2832,6 +2834,23 @@ F:	drivers/clocksource/armv7m_systick.c
 N:	stm32
 N:	stm

+ARM/SUNPLUS SP7021 SOC SUPPORT
+M:	Qin Jian <qinjian@cqplus1.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for mon-subscribers)
+S:	Maintained
+W:	https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/overview
+F:	Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml
+F:	Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml
+F:	Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml
+F:	Documentation/devicetree/bindings/reset/sunplus,reset.yaml
+F:	arch/arm/boot/dts/sunplus-sp7021*.dts*
+F:	arch/arm/configs/sp7021_*defconfig
+F:	arch/arm/mach-sunplus/
+F:	drivers/irqchip/irq-sp7021-intc.c
+F:	drivers/reset/reset-sunplus.c
+F:	include/dt-bindings/clock/sunplus,sp7021-clkc.h
+F:	include/dt-bindings/reset/sunplus,sp7021-reset.h
+
 ARM/Synaptics SoC support
 M:	Jisheng Zhang <jszhang@kernel.org>
 M:	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@ -588,6 +588,8 @@ source "arch/arm/mach-sti/Kconfig"

 source "arch/arm/mach-stm32/Kconfig"

+source "arch/arm/mach-sunplus/Kconfig"
+
 source "arch/arm/mach-sunxi/Kconfig"

 source "arch/arm/mach-tegra/Kconfig"
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@ -215,6 +215,7 @@ machine-$(CONFIG_ARCH_RENESAS)	 	+= shmobile
 machine-$(CONFIG_ARCH_INTEL_SOCFPGA)	+= socfpga
 machine-$(CONFIG_ARCH_STI)		+= sti
 machine-$(CONFIG_ARCH_STM32)		+= stm32
+machine-$(CONFIG_ARCH_SUNPLUS)		+= sunplus
 machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
 machine-$(CONFIG_ARCH_TEGRA)		+= tegra
 machine-$(CONFIG_ARCH_U8500)		+= ux500
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@ -79,6 +79,8 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
 	at91-vinco.dtb
 dtb-$(CONFIG_SOC_SAMA7G5) += \
 	at91-sama7g5ek.dtb
+dtb-$(CONFIG_SOC_SP7021) += \
+	sunplus-sp7021-demo-v3.dtb
 dtb-$(CONFIG_ARCH_AXXIA) += \
 	axm5516-amarillo.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += \
--- a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
+++ b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
@ -110,6 +110,7 @@
 			compatible = "nuvoton,npcm750-reset";
 			reg = <0xf0801000 0x70>;
 			#reset-cells = <2>;
+			nuvoton,sysgcr = <&gcr>;
 		};

 		clk: clock-controller@f0801000 {
--- a/arch/arm/boot/dts/sunplus-sp7021-achip.dtsi
+++ b/arch/arm/boot/dts/sunplus-sp7021-achip.dtsi
@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Sunplus SP7021
+ *
+ * Copyright (C) 2021 Sunplus Technology Co.
+ */
+
+#include "sunplus-sp7021.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "sunplus,sp7021-achip", "sunplus,sp7021";
+	model = "Sunplus SP7021 (CA7)";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clock-frequency = <931000000>;
+		};
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clock-frequency = <931000000>;
+		};
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+			clock-frequency = <931000000>;
+		};
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+			clock-frequency = <931000000>;
+		};
+	};
+
+	gic: interrupt-controller@9f101000 {
+		compatible = "arm,cortex-a7-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x9f101000 0x1000>,
+		      <0x9f102000 0x2000>,
+		      <0x9f104000 0x2000>,
+		      <0x9f106000 0x2000>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <XTAL>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	soc@9c000000 {
+		intc: interrupt-controller@780 {
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, /* EXT_INT0 */
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; /* EXT_INT1 */
+		};
+	};
+};
--- a/arch/arm/boot/dts/sunplus-sp7021-demo-v3.dts
+++ b/arch/arm/boot/dts/sunplus-sp7021-demo-v3.dts
@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Sunplus SP7021 Demo V3 SBC board
+ *
+ * Copyright (C) Sunplus Technology Co.
+ */
+
+/dts-v1/;
+
+#include "sunplus-sp7021-achip.dtsi"
+
+/ {
+	compatible = "sunplus,sp7021-demo-v3", "sunplus,sp7021";
+	model = "Sunplus SP7021/CA7/Demo_V3";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+};
--- a/arch/arm/boot/dts/sunplus-sp7021.dtsi
+++ b/arch/arm/boot/dts/sunplus-sp7021.dtsi
@ -0,0 +1,310 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Sunplus SP7021
+ *
+ * Copyright (C) 2021 Sunplus Technology Co.
+ */
+
+#include <dt-bindings/clock/sunplus,sp7021-clkc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/reset/sunplus,sp7021-reset.h>
+#include <dt-bindings/pinctrl/sppctl-sp7021.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#define XTAL	27000000
+
+/ {
+	compatible = "sunplus,sp7021";
+	model = "Sunplus SP7021";
+
+	clocks {
+		extclk: osc0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <XTAL>;
+			clock-output-names = "extclk";
+		};
+	};
+
+	soc@9c000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x9c000000 0x400000>;
+		interrupt-parent = <&intc>;
+
+		clkc: clock-controller@4 {
+			compatible = "sunplus,sp7021-clkc";
+			reg = <0x4 0x28>,
+			      <0x200 0x44>,
+			      <0x268 0x04>;
+			clocks = <&extclk>;
+			#clock-cells = <1>;
+		};
+
+		intc: interrupt-controller@780 {
+			compatible = "sunplus,sp7021-intc";
+			reg = <0x780 0x80>, <0xa80 0x80>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		otp: otp@af00 {
+			compatible = "sunplus,sp7021-ocotp";
+			reg = <0xaf00 0x34>, <0xaf80 0x58>;
+			reg-names = "hb_gpio", "otprx";
+			clocks = <&clkc CLK_OTPRX>;
+			resets = <&rstc RST_OTPRX>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			therm_calib: thermal-calibration@14 {
+				reg = <0x14 0x3>;
+			};
+			disc_vol: disconnect-voltage@18 {
+				reg = <0x18 0x2>;
+			};
+			mac_addr0: mac-address0@34 {
+				reg = <0x34 0x6>;
+			};
+			mac_addr1: mac-address1@3a {
+				reg = <0x3a 0x6>;
+			};
+		};
+
+		pctl: pinctrl@100 {
+			compatible = "sunplus,sp7021-pctl";
+			reg = <0x100 0x100>,
+			      <0x300 0x100>,
+			      <0x32e4 0x1C>,
+			      <0x80 0x20>;
+			reg-names = "moon2", "gpioxt", "first", "moon1";
+			gpio-controller;
+			#gpio-cells = <2>;
+			clocks = <&clkc CLK_GPIO>;
+			resets = <&rstc RST_GPIO>;
+
+			emac_pins: pinmux-emac-pins {
+				sunplus,pins = <
+					SPPCTL_IOPAD(49,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_CLK_OUT,0)
+					SPPCTL_IOPAD(44,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDC,0)
+					SPPCTL_IOPAD(43,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDIO,0)
+					SPPCTL_IOPAD(52,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXEN,0)
+					SPPCTL_IOPAD(50,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD0,0)
+					SPPCTL_IOPAD(51,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD1,0)
+					SPPCTL_IOPAD(46,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_CRSDV,0)
+					SPPCTL_IOPAD(47,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD0,0)
+					SPPCTL_IOPAD(48,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD1,0)
+					SPPCTL_IOPAD(45,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXER,0)
+					SPPCTL_IOPAD(59,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_TXEN,0)
+					SPPCTL_IOPAD(57,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_TXD0,0)
+					SPPCTL_IOPAD(58,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_TXD1,0)
+					SPPCTL_IOPAD(54,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_CRSDV,0)
+					SPPCTL_IOPAD(55,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_RXD0,0)
+					SPPCTL_IOPAD(56,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_RXD1,0)
+					SPPCTL_IOPAD(53,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_RXER,0)
+				>;
+				sunplus,zerofunc = <
+					MUXF_L2SW_LED_FLASH0
+					MUXF_L2SW_LED_FLASH1
+					MUXF_L2SW_LED_ON0
+					MUXF_L2SW_LED_ON1
+					MUXF_DAISY_MODE
+				>;
+			};
+
+			emmc_pins: pinmux-emmc-pins {
+				function = "CARD0_EMMC";
+				groups = "CARD0_EMMC";
+			};
+
+			leds_pins: pinmux-leds-pins {
+				sunplus,pins = < SPPCTL_IOPAD(0,SPPCTL_PCTL_G_GPIO,0,SPPCTL_PCTL_L_OUT) >;
+			};
+
+			sdcard_pins: pinmux-sdcard-pins {
+				function = "SD_CARD";
+				groups = "SD_CARD";
+				sunplus,pins = < SPPCTL_IOPAD(91, SPPCTL_PCTL_G_GPIO, 0, 0) >;
+			};
+
+			spi0_pins: pinmux-spi0-pins {
+				sunplus,pins = <
+					SPPCTL_IOPAD(26,SPPCTL_PCTL_G_GPIO,0,0)
+					SPPCTL_IOPAD(28,SPPCTL_PCTL_G_GPIO,0,0)
+					SPPCTL_IOPAD(23,SPPCTL_PCTL_G_PMUX,MUXF_SPI0S_DO,0)
+					SPPCTL_IOPAD(25,SPPCTL_PCTL_G_PMUX,MUXF_SPI0S_DI,0)
+					SPPCTL_IOPAD(27,SPPCTL_PCTL_G_PMUX,MUXF_SPI0S_CLK,0)
+				>;
+			};
+
+			uart0_pins: pinmux-uart0-pins {
+				function = "UA0";
+				groups = "UA0";
+			};
+
+			uart1_pins: pinmux-uart1-pins {
+				sunplus,pins = <
+					SPPCTL_IOPAD(14,SPPCTL_PCTL_G_PMUX,MUXF_UA4_TX,0)
+					SPPCTL_IOPAD(16,SPPCTL_PCTL_G_PMUX,MUXF_UA4_RX,0)
+				>;
+			};
+
+			uart2_pins: pinmux-uart2-pins {
+				sunplus,pins = <
+					SPPCTL_IOPAD(16,SPPCTL_PCTL_G_PMUX,MUXF_UA2_TX,0)
+					SPPCTL_IOPAD(17,SPPCTL_PCTL_G_PMUX,MUXF_UA2_RX,0)
+					SPPCTL_IOPAD(18,SPPCTL_PCTL_G_PMUX,MUXF_UA2_RTS,0)
+					SPPCTL_IOPAD(19,SPPCTL_PCTL_G_PMUX,MUXF_UA2_CTS,0)
+				>;
+			};
+
+			uart4_pins: pinmux-uart4-pins {
+				sunplus,pins = <
+					SPPCTL_IOPAD(22,SPPCTL_PCTL_G_PMUX,MUXF_UA4_TX,0)
+					SPPCTL_IOPAD(20,SPPCTL_PCTL_G_PMUX,MUXF_UA4_RX,0)
+					SPPCTL_IOPAD(23,SPPCTL_PCTL_G_PMUX,MUXF_UA4_RTS,0)
+					SPPCTL_IOPAD(21,SPPCTL_PCTL_G_PMUX,MUXF_UA4_CTS,0)
+				>;
+			};
+		};
+
+		rstc: reset@54 {
+			compatible = "sunplus,sp7021-reset";
+			reg = <0x54 0x28>;
+			#reset-cells = <1>;
+		};
+
+		rtc: rtc@3a00 {
+			compatible = "sunplus,sp7021-rtc";
+			reg = <0x3a00 0x80>;
+			reg-names = "rtc";
+			clocks = <&clkc CLK_RTC>;
+			resets = <&rstc RST_RTC>;
+			interrupts = <163 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		spi_controller0: spi@2d80 {
+			compatible = "sunplus,sp7021-spi";
+			reg = <0x2d80 0x80>, <0x2e00 0x80>;
+			reg-names = "master", "slave";
+			interrupts = <144 IRQ_TYPE_LEVEL_HIGH>,
+				     <146 IRQ_TYPE_LEVEL_HIGH>,
+				     <145 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma_w", "master_risc", "slave_risc";
+			clocks = <&clkc CLK_SPI_COMBO_0>;
+			resets = <&rstc RST_SPI_COMBO_0>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_pins>;
+			cs-gpios = <&pctl 26 GPIO_ACTIVE_LOW>,
+				   <&pctl 28 GPIO_ACTIVE_LOW>;
+		};
+
+		spi_controller1: spi@f480 {
+			compatible = "sunplus,sp7021-spi";
+			reg = <0xf480 0x80>, <0xf500 0x80>;
+			reg-names = "master", "slave";
+			interrupts = <67 IRQ_TYPE_LEVEL_HIGH>,
+				     <69 IRQ_TYPE_LEVEL_HIGH>,
+				     <68 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma_w", "master_risc", "slave_risc";
+			clocks = <&clkc CLK_SPI_COMBO_1>;
+			resets = <&rstc RST_SPI_COMBO_1>;
+			spi-max-frequency = <25000000>;
+			status = "disabled";
+		};
+
+		spi_controller2: spi@f600 {
+			compatible = "sunplus,sp7021-spi";
+			reg = <0xf600 0x80>, <0xf680 0x80>;
+			reg-names = "master", "slave";
+			interrupts = <70 IRQ_TYPE_LEVEL_HIGH>,
+				     <72 IRQ_TYPE_LEVEL_HIGH>,
+				     <71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma_w", "master_risc", "slave_risc";
+			clocks = <&clkc CLK_SPI_COMBO_2>;
+			resets = <&rstc RST_SPI_COMBO_2>;
+			spi-max-frequency = <25000000>;
+			status = "disabled";
+		};
+
+		spi_controller3: spi@f780 {
+			compatible = "sunplus,sp7021-spi";
+			reg = <0xf780 0x80>, <0xf800 0x80>;
+			reg-names = "master", "slave";
+			interrupts = <73 IRQ_TYPE_LEVEL_HIGH>,
+				     <75 IRQ_TYPE_LEVEL_HIGH>,
+				     <74 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma_w", "master_risc", "slave_risc";
+			clocks = <&clkc CLK_SPI_COMBO_3>;
+			resets = <&rstc RST_SPI_COMBO_3>;
+			spi-max-frequency = <25000000>;
+			status = "disabled";
+		};
+
+		uart0: serial@900 {
+			compatible = "sunplus,sp7021-uart";
+			reg = <0x900 0x80>;
+			interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLK_UA0>;
+			resets = <&rstc RST_UA0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins>;
+		};
+
+		uart1: serial@980 {
+			compatible = "sunplus,sp7021-uart";
+			reg = <0x980 0x80>;
+			interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLK_UA1>;
+			resets = <&rstc RST_UA1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_pins>;
+			status = "disabled";
+		};
+
+		uart2: serial@800 {
+			compatible = "sunplus,sp7021-uart";
+			reg = <0x800 0x80>;
+			interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLK_UA2>;
+			resets = <&rstc RST_UA2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_pins>;
+			status = "disabled";
+		};
+
+		uart3: serial@880 {
+			compatible = "sunplus,sp7021-uart";
+			reg = <0x880 0x80>;
+			interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLK_UA3>;
+			resets = <&rstc RST_UA3>;
+			status = "disabled";
+		};
+
+		uart4: serial@8780 {
+			compatible = "sunplus,sp7021-uart";
+			reg = <0x8780 0x80>;
+			interrupts = <134 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLK_UA4>;
+			resets = <&rstc RST_UA4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart4_pins>;
+			status = "disabled";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
+		system-led {
+			label = "system-led";
+			gpios = <&pctl 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@ -96,6 +96,7 @@ CONFIG_MACH_SPEAR1310=y
 CONFIG_MACH_SPEAR1340=y
 CONFIG_ARCH_STI=y
 CONFIG_ARCH_STM32=y
+CONFIG_ARCH_SUNPLUS=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_TEGRA=y
 CONFIG_ARCH_UNIPHIER=y
--- a/arch/arm/configs/sp7021_defconfig
+++ b/arch/arm/configs/sp7021_defconfig
@ -0,0 +1,59 @@
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_XZ is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_RD_LZ4 is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_PERF_EVENTS=y
+CONFIG_SLAB=y
+CONFIG_ARCH_SUNPLUS=y
+# CONFIG_VDSO is not set
+CONFIG_SMP=y
+CONFIG_THUMB2_KERNEL=y
+CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_UEVENT_HELPER=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_INPUT_SPARSEKMAP=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_RESET_CONTROLLER=y
+CONFIG_EXT4_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
+CONFIG_EXFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_USER=y
--- a/arch/arm/mach-sunplus/Kconfig
+++ b/arch/arm/mach-sunplus/Kconfig
@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+menuconfig ARCH_SUNPLUS
+	bool "Sunplus SoCs"
+	depends on ARCH_MULTI_V7
+	help
+	  Support for Sunplus SoC family: SP7021 and succeeding SoC-based systems,
+	  such as the Banana Pi BPI-F2S development board (and derivatives).
+	  (<http://www.sinovoip.com.cn/ecp_view.asp?id=586>)
+	  (<https://tibbo.com/store/plus1.html>)
+
+config SOC_SP7021
+	bool "Sunplus SP7021 SoC support"
+	depends on ARCH_SUNPLUS
+	default ARCH_SUNPLUS
+	select HAVE_ARM_ARCH_TIMER
+	select ARM_GIC
+	select ARM_PSCI
+	select PINCTRL
+	select PINCTRL_SPPCTL
+	select SERIAL_SUNPLUS
+	select SERIAL_SUNPLUS_CONSOLE
+	help
+	  Support for Sunplus SP7021 SoC. It is based on ARM 4-core
+	  Cortex-A7 with various peripherals (e.g.: I2C, SPI, SDIO,
+	  Ethernet, etc.), FPGA interface,  chip-to-chip bus.
+	  It is designed for industrial control.
--- a/arch/arm/mach-sunplus/Makefile
+++ b/arch/arm/mach-sunplus/Makefile
@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-$(CONFIG_SOC_SP7021)	+= sp7021.o
--- a/arch/arm/mach-sunplus/sp7021.c
+++ b/arch/arm/mach-sunplus/sp7021.c
@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) Sunplus Technology Co., Ltd.
+ *       All rights reserved.
+ */
+#include <linux/kernel.h>
+#include <asm/mach/arch.h>
+
+static const char *sp7021_compat[] __initconst = {
+	"sunplus,sp7021",
+	NULL
+};
+
+DT_MACHINE_START(SP7021_DT, "SP7021")
+	.dt_compat	= sp7021_compat,
+MACHINE_END
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@ -214,6 +214,17 @@ config ARCH_MXC
 	  This enables support for the ARMv8 based SoCs in the
 	  NXP i.MX family.

+config ARCH_NPCM
+	bool "Nuvoton NPCM Architecture"
+	select PINCTRL
+	select GPIOLIB
+	select NPCM7XX_TIMER
+	select RESET_CONTROLLER
+	select MFD_SYSCON
+	help
+	  General support for NPCM8xx BMC (Arbel).
+	  Nuvoton NPCM8xx BMC based on the Cortex A35.
+
 config ARCH_QCOM
 	bool "Qualcomm Platforms"
 	select GPIOLIB
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@ -19,6 +19,7 @@ subdir-y += lg
 subdir-y += marvell
 subdir-y += mediatek
 subdir-y += microchip
+subdir-y += nuvoton
 subdir-y += nvidia
 subdir-y += qcom
 subdir-y += realtek
--- a/arch/arm64/boot/dts/nuvoton/Makefile
+++ b/arch/arm64/boot/dts/nuvoton/Makefile
@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_NPCM) += nuvoton-npcm845-evb.dtb
--- a/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
+++ b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021 Nuvoton Technology tomer.maimon@nuvoton.com
+
+#include <dt-bindings/clock/nuvoton,npcm845-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		gcr: system-controller@f0800000 {
+			compatible = "nuvoton,npcm845-gcr", "syscon";
+			reg = <0x0 0xf0800000 0x0 0x1000>;
+		};
+
+		gic: interrupt-controller@dfff9000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xdfff9000 0x0 0x1000>,
+			      <0x0 0xdfffa000 0x0 0x2000>,
+			      <0x0 0xdfffc000 0x0 0x2000>,
+			      <0x0 0xdfffe000 0x0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#address-cells = <0>;
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+				};
+			};
+		};
+	};
+
+	ahb {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		rstc: reset-controller@f0801000 {
+			compatible = "nuvoton,npcm845-reset";
+			reg = <0x0 0xf0801000 0x0 0x78>;
+			#reset-cells = <2>;
+			nuvoton,sysgcr = <&gcr>;
+		};
+
+		clk: clock-controller@f0801000 {
+			compatible = "nuvoton,npcm845-clk";
+			#clock-cells = <1>;
+			reg = <0x0 0xf0801000 0x0 0x1000>;
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			interrupt-parent = <&gic>;
+			ranges = <0x0 0x0 0xf0000000 0x00300000>,
+				<0xfff00000 0x0 0xfff00000 0x00016000>;
+
+			timer0: timer@8000 {
+				compatible = "nuvoton,npcm845-timer";
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x8000 0x1C>;
+				clocks = <&clk NPCM8XX_CLK_REFCLK>;
+				clock-names = "refclk";
+			};
+
+			serial0: serial@0 {
+				compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+				reg = <0x0 0x1000>;
+				clocks = <&clk NPCM8XX_CLK_UART>;
+				interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			serial1: serial@1000 {
+				compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+				reg = <0x1000 0x1000>;
+				clocks = <&clk NPCM8XX_CLK_UART>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			serial2: serial@2000 {
+				compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+				reg = <0x2000 0x1000>;
+				clocks = <&clk NPCM8XX_CLK_UART>;
+				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			serial3: serial@3000 {
+				compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+				reg = <0x3000 0x1000>;
+				clocks = <&clk NPCM8XX_CLK_UART>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			serial4: serial@4000 {
+				compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+				reg = <0x4000 0x1000>;
+				clocks = <&clk NPCM8XX_CLK_UART>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			serial5: serial@5000 {
+				compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+				reg = <0x5000 0x1000>;
+				clocks = <&clk NPCM8XX_CLK_UART>;
+				interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			serial6: serial@6000 {
+				compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+				reg = <0x6000 0x1000>;
+				clocks = <&clk NPCM8XX_CLK_UART>;
+				interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			watchdog0: watchdog@801c {
+				compatible = "nuvoton,npcm845-wdt", "nuvoton,npcm750-wdt";
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x801c 0x4>;
+				status = "disabled";
+				clocks = <&clk NPCM8XX_CLK_REFCLK>;
+				syscon = <&gcr>;
+			};
+
+			watchdog1: watchdog@901c {
+				compatible = "nuvoton,npcm845-wdt", "nuvoton,npcm750-wdt";
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x901c 0x4>;
+				status = "disabled";
+				clocks = <&clk NPCM8XX_CLK_REFCLK>;
+				syscon = <&gcr>;
+			};
+
+			watchdog2: watchdog@a01c {
+				compatible = "nuvoton,npcm845-wdt", "nuvoton,npcm750-wdt";
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xa01c 0x4>;
+				status = "disabled";
+				clocks = <&clk NPCM8XX_CLK_REFCLK>;
+				syscon = <&gcr>;
+			};
+		};
+	};
+};
--- a/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
+++ b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021 Nuvoton Technology tomer.maimon@nuvoton.com
+
+/dts-v1/;
+#include "nuvoton-npcm845.dtsi"
+
+/ {
+	model = "Nuvoton npcm845 Development Board (Device Tree)";
+	compatible = "nuvoton,npcm845-evb", "nuvoton,npcm845";
+
+	aliases {
+		serial0 = &serial0;
+	};
+
+	chosen {
+		stdout-path = &serial0;
+	};
+
+	memory {
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&watchdog1 {
+	status = "okay";
+};
--- a/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845.dtsi
+++ b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845.dtsi
@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021 Nuvoton Technology tomer.maimon@nuvoton.com
+
+#include "nuvoton-common-npcm8xx.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			clocks = <&clk NPCM8XX_CLK_CPU>;
+			reg = <0x0 0x0>;
+			next-level-cache = <&l2>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			clocks = <&clk NPCM8XX_CLK_CPU>;
+			reg = <0x0 0x1>;
+			next-level-cache = <&l2>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			clocks = <&clk NPCM8XX_CLK_CPU>;
+			reg = <0x0 0x2>;
+			next-level-cache = <&l2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			clocks = <&clk NPCM8XX_CLK_CPU>;
+			reg = <0x0 0x3>;
+			next-level-cache = <&l2>;
+			enable-method = "psci";
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a35-pmu";
+		interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible      = "arm,psci-1.0";
+		method          = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@ -49,6 +49,7 @@ CONFIG_ARCH_MEDIATEK=y
 CONFIG_ARCH_MESON=y
 CONFIG_ARCH_MVEBU=y
 CONFIG_ARCH_MXC=y
+CONFIG_ARCH_NPCM=y
 CONFIG_ARCH_QCOM=y
 CONFIG_ARCH_RENESAS=y
 CONFIG_ARCH_ROCKCHIP=y
@ -623,6 +624,7 @@ CONFIG_UNIPHIER_WATCHDOG=y
 CONFIG_PM8916_WATCHDOG=m
 CONFIG_BCM2835_WDT=y
 CONFIG_BCM7038_WDT=m
+CONFIG_NPCM7XX_WATCHDOG=y
 CONFIG_MFD_ALTERA_SYSMGR=y
 CONFIG_MFD_BD9571MWV=y
 CONFIG_MFD_AXP20X_I2C=y
@ -1030,6 +1032,7 @@ CONFIG_COMMON_CLK_FSL_SAI=y
 CONFIG_COMMON_CLK_S2MPS11=y
 CONFIG_COMMON_CLK_PWM=y
 CONFIG_COMMON_CLK_VC5=y
+CONFIG_COMMON_CLK_NPCM8XX=y
 CONFIG_COMMON_CLK_BD718XX=m
 CONFIG_CLK_RASPBERRYPI=m
 CONFIG_CLK_IMX8MM=y
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@ -665,4 +665,13 @@ config MCHP_EIC
 	help
 	  Support for Microchip External Interrupt Controller.

+config SUNPLUS_SP7021_INTC
+	bool "Sunplus SP7021 interrupt controller" if COMPILE_TEST
+	default SOC_SP7021
+	help
+	  Support for the Sunplus SP7021 Interrupt Controller IP core.
+	  SP7021 SoC has 2 Chips: C-Chip & P-Chip. This is used as a
+	  chained controller, routing all interrupt source in P-Chip to
+	  the primary controller on C-Chip.
+
 endmenu
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@ -119,3 +119,4 @@ obj-$(CONFIG_WPCM450_AIC)		+= irq-wpcm450-aic.o
 obj-$(CONFIG_IRQ_IDT3243X)		+= irq-idt3243x.o
 obj-$(CONFIG_APPLE_AIC)			+= irq-apple-aic.o
 obj-$(CONFIG_MCHP_EIC)			+= irq-mchp-eic.o
+obj-$(CONFIG_SUNPLUS_SP7021_INTC)	+= irq-sp7021-intc.o
--- a/drivers/irqchip/irq-sp7021-intc.c
+++ b/drivers/irqchip/irq-sp7021-intc.c
@ -0,0 +1,278 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) Sunplus Technology Co., Ltd.
+ *       All rights reserved.
+ */
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#define SP_INTC_HWIRQ_MIN	0
+#define SP_INTC_HWIRQ_MAX	223
+
+#define SP_INTC_NR_IRQS		(SP_INTC_HWIRQ_MAX - SP_INTC_HWIRQ_MIN + 1)
+#define SP_INTC_NR_GROUPS	DIV_ROUND_UP(SP_INTC_NR_IRQS, 32)
+#define SP_INTC_REG_SIZE	(SP_INTC_NR_GROUPS * 4)
+
+/* REG_GROUP_0 regs */
+#define REG_INTR_TYPE		(sp_intc.g0)
+#define REG_INTR_POLARITY	(REG_INTR_TYPE     + SP_INTC_REG_SIZE)
+#define REG_INTR_PRIORITY	(REG_INTR_POLARITY + SP_INTC_REG_SIZE)
+#define REG_INTR_MASK		(REG_INTR_PRIORITY + SP_INTC_REG_SIZE)
+
+/* REG_GROUP_1 regs */
+#define REG_INTR_CLEAR		(sp_intc.g1)
+#define REG_MASKED_EXT1		(REG_INTR_CLEAR    + SP_INTC_REG_SIZE)
+#define REG_MASKED_EXT0		(REG_MASKED_EXT1   + SP_INTC_REG_SIZE)
+#define REG_INTR_GROUP		(REG_INTR_CLEAR    + 31 * 4)
+
+#define GROUP_MASK		(BIT(SP_INTC_NR_GROUPS) - 1)
+#define GROUP_SHIFT_EXT1	(0)
+#define GROUP_SHIFT_EXT0	(8)
+
+/*
+ * When GPIO_INT0~7 set to edge trigger, doesn't work properly.
+ * WORKAROUND: change it to level trigger, and toggle the polarity
+ * at ACK/Handler to make the HW work.
+ */
+#define GPIO_INT0_HWIRQ		120
+#define GPIO_INT7_HWIRQ		127
+#define IS_GPIO_INT(irq)					\
+({								\
+	u32 i = irq;						\
+	(i >= GPIO_INT0_HWIRQ) && (i <= GPIO_INT7_HWIRQ);	\
+})
+
+/* index of states */
+enum {
+	_IS_EDGE = 0,
+	_IS_LOW,
+	_IS_ACTIVE
+};
+
+#define STATE_BIT(irq, idx)		(((irq) - GPIO_INT0_HWIRQ) * 3 + (idx))
+#define ASSIGN_STATE(irq, idx, v)	assign_bit(STATE_BIT(irq, idx), sp_intc.states, v)
+#define TEST_STATE(irq, idx)		test_bit(STATE_BIT(irq, idx), sp_intc.states)
+
+static struct sp_intctl {
+	/*
+	 * REG_GROUP_0: include type/polarity/priority/mask regs.
+	 * REG_GROUP_1: include clear/masked_ext0/masked_ext1/group regs.
+	 */
+	void __iomem *g0; // REG_GROUP_0 base
+	void __iomem *g1; // REG_GROUP_1 base
+
+	struct irq_domain *domain;
+	raw_spinlock_t lock;
+
+	/*
+	 * store GPIO_INT states
+	 * each interrupt has 3 states: is_edge, is_low, is_active
+	 */
+	DECLARE_BITMAP(states, (GPIO_INT7_HWIRQ - GPIO_INT0_HWIRQ + 1) * 3);
+} sp_intc;
+
+static struct irq_chip sp_intc_chip;
+
+static void sp_intc_assign_bit(u32 hwirq, void __iomem *base, bool value)
+{
+	u32 offset, mask;
+	unsigned long flags;
+	void __iomem *reg;
+
+	offset = (hwirq / 32) * 4;
+	reg = base + offset;
+
+	raw_spin_lock_irqsave(&sp_intc.lock, flags);
+	mask = readl_relaxed(reg);
+	if (value)
+		mask |= BIT(hwirq % 32);
+	else
+		mask &= ~BIT(hwirq % 32);
+	writel_relaxed(mask, reg);
+	raw_spin_unlock_irqrestore(&sp_intc.lock, flags);
+}
+
+static void sp_intc_ack_irq(struct irq_data *d)
+{
+	u32 hwirq = d->hwirq;
+
+	if (unlikely(IS_GPIO_INT(hwirq) && TEST_STATE(hwirq, _IS_EDGE))) { // WORKAROUND
+		sp_intc_assign_bit(hwirq, REG_INTR_POLARITY, !TEST_STATE(hwirq, _IS_LOW));
+		ASSIGN_STATE(hwirq, _IS_ACTIVE, true);
+	}
+
+	sp_intc_assign_bit(hwirq, REG_INTR_CLEAR, 1);
+}
+
+static void sp_intc_mask_irq(struct irq_data *d)
+{
+	sp_intc_assign_bit(d->hwirq, REG_INTR_MASK, 0);
+}
+
+static void sp_intc_unmask_irq(struct irq_data *d)
+{
+	sp_intc_assign_bit(d->hwirq, REG_INTR_MASK, 1);
+}
+
+static int sp_intc_set_type(struct irq_data *d, unsigned int type)
+{
+	u32 hwirq = d->hwirq;
+	bool is_edge = !(type & IRQ_TYPE_LEVEL_MASK);
+	bool is_low = (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_EDGE_FALLING);
+
+	irq_set_handler_locked(d, is_edge ? handle_edge_irq : handle_level_irq);
+
+	if (unlikely(IS_GPIO_INT(hwirq) && is_edge)) { // WORKAROUND
+		/* store states */
+		ASSIGN_STATE(hwirq, _IS_EDGE, is_edge);
+		ASSIGN_STATE(hwirq, _IS_LOW, is_low);
+		ASSIGN_STATE(hwirq, _IS_ACTIVE, false);
+		/* change to level */
+		is_edge = false;
+	}
+
+	sp_intc_assign_bit(hwirq, REG_INTR_TYPE, is_edge);
+	sp_intc_assign_bit(hwirq, REG_INTR_POLARITY, is_low);
+
+	return 0;
+}
+
+static int sp_intc_get_ext_irq(int ext_num)
+{
+	void __iomem *base = ext_num ? REG_MASKED_EXT1 : REG_MASKED_EXT0;
+	u32 shift = ext_num ? GROUP_SHIFT_EXT1 : GROUP_SHIFT_EXT0;
+	u32 groups;
+	u32 pending_group;
+	u32 group;
+	u32 pending_irq;
+
+	groups = readl_relaxed(REG_INTR_GROUP);
+	pending_group = (groups >> shift) & GROUP_MASK;
+	if (!pending_group)
+		return -1;
+
+	group = fls(pending_group) - 1;
+	pending_irq = readl_relaxed(base + group * 4);
+	if (!pending_irq)
+		return -1;
+
+	return (group * 32) + fls(pending_irq) - 1;
+}
+
+static void sp_intc_handle_ext_cascaded(struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	int ext_num = (uintptr_t)irq_desc_get_handler_data(desc);
+	int hwirq;
+
+	chained_irq_enter(chip, desc);
+
+	while ((hwirq = sp_intc_get_ext_irq(ext_num)) >= 0) {
+		if (unlikely(IS_GPIO_INT(hwirq) && TEST_STATE(hwirq, _IS_ACTIVE))) { // WORKAROUND
+			ASSIGN_STATE(hwirq, _IS_ACTIVE, false);
+			sp_intc_assign_bit(hwirq, REG_INTR_POLARITY, TEST_STATE(hwirq, _IS_LOW));
+		} else {
+			generic_handle_domain_irq(sp_intc.domain, hwirq);
+		}
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+static struct irq_chip sp_intc_chip = {
+	.name = "sp_intc",
+	.irq_ack = sp_intc_ack_irq,
+	.irq_mask = sp_intc_mask_irq,
+	.irq_unmask = sp_intc_unmask_irq,
+	.irq_set_type = sp_intc_set_type,
+};
+
+static int sp_intc_irq_domain_map(struct irq_domain *domain,
+				  unsigned int irq, irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler(irq, &sp_intc_chip, handle_level_irq);
+	irq_set_chip_data(irq, &sp_intc_chip);
+	irq_set_noprobe(irq);
+
+	return 0;
+}
+
+static const struct irq_domain_ops sp_intc_dm_ops = {
+	.xlate = irq_domain_xlate_twocell,
+	.map = sp_intc_irq_domain_map,
+};
+
+static int sp_intc_irq_map(struct device_node *node, int i)
+{
+	unsigned int irq;
+
+	irq = irq_of_parse_and_map(node, i);
+	if (!irq)
+		return -ENOENT;
+
+	irq_set_chained_handler_and_data(irq, sp_intc_handle_ext_cascaded, (void *)(uintptr_t)i);
+
+	return 0;
+}
+
+static int __init sp_intc_init_dt(struct device_node *node, struct device_node *parent)
+{
+	int i, ret;
+
+	sp_intc.g0 = of_iomap(node, 0);
+	if (!sp_intc.g0)
+		return -ENXIO;
+
+	sp_intc.g1 = of_iomap(node, 1);
+	if (!sp_intc.g1) {
+		ret = -ENXIO;
+		goto out_unmap0;
+	}
+
+	ret = sp_intc_irq_map(node, 0); // EXT_INT0
+	if (ret)
+		goto out_unmap1;
+
+	ret = sp_intc_irq_map(node, 1); // EXT_INT1
+	if (ret)
+		goto out_unmap1;
+
+	/* initial regs */
+	for (i = 0; i < SP_INTC_NR_GROUPS; i++) {
+		/* all mask */
+		writel_relaxed(0, REG_INTR_MASK + i * 4);
+		/* all edge */
+		writel_relaxed(~0, REG_INTR_TYPE + i * 4);
+		/* all high-active */
+		writel_relaxed(0, REG_INTR_POLARITY + i * 4);
+		/* all EXT_INT0 */
+		writel_relaxed(~0, REG_INTR_PRIORITY + i * 4);
+		/* all clear */
+		writel_relaxed(~0, REG_INTR_CLEAR + i * 4);
+	}
+
+	sp_intc.domain = irq_domain_add_linear(node, SP_INTC_NR_IRQS,
+					       &sp_intc_dm_ops, &sp_intc);
+	if (!sp_intc.domain) {
+		ret = -ENOMEM;
+		goto out_unmap1;
+	}
+
+	raw_spin_lock_init(&sp_intc.lock);
+
+	return 0;
+
+out_unmap1:
+	iounmap(sp_intc.g1);
+out_unmap0:
+	iounmap(sp_intc.g0);
+
+	return ret;
+}
+
+IRQCHIP_DECLARE(sp_intc, "sunplus,sp7021-intc", sp_intc_init_dt);
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@ -231,6 +231,15 @@ config RESET_STARFIVE_JH7100
 	help
 	  This enables the reset controller driver for the StarFive JH7100 SoC.

+config RESET_SUNPLUS
+	bool "Sunplus SoCs Reset Driver" if COMPILE_TEST
+	default ARCH_SUNPLUS
+	help
+	  This enables the reset driver support for Sunplus SoCs.
+	  The reset lines that can be asserted and deasserted by toggling bits
+	  in a contiguous, exclusive register space. The register is HIWORD_MASKED,
+	  which means each register holds 16 reset lines.
+
 config RESET_SUNXI
 	bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI
 	default ARCH_SUNXI
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@ -30,6 +30,7 @@ obj-$(CONFIG_RESET_SCMI) += reset-scmi.o
 obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
 obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
 obj-$(CONFIG_RESET_STARFIVE_JH7100) += reset-starfive-jh7100.o
+obj-$(CONFIG_RESET_SUNPLUS) += reset-sunplus.o
 obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
 obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o
 obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o
--- a/drivers/reset/reset-npcm.c
+++ b/drivers/reset/reset-npcm.c
@ -17,13 +17,20 @@

 /* NPCM7xx GCR registers */
 #define NPCM_MDLR_OFFSET	0x7C
-#define NPCM_MDLR_USBD0		BIT(9)
-#define NPCM_MDLR_USBD1		BIT(8)
-#define NPCM_MDLR_USBD2_4	BIT(21)
-#define NPCM_MDLR_USBD5_9	BIT(22)
+#define NPCM7XX_MDLR_USBD0	BIT(9)
+#define NPCM7XX_MDLR_USBD1	BIT(8)
+#define NPCM7XX_MDLR_USBD2_4	BIT(21)
+#define NPCM7XX_MDLR_USBD5_9	BIT(22)
+
+/* NPCM8xx MDLR bits */
+#define NPCM8XX_MDLR_USBD0_3	BIT(9)
+#define NPCM8XX_MDLR_USBD4_7	BIT(22)
+#define NPCM8XX_MDLR_USBD8	BIT(24)
+#define NPCM8XX_MDLR_USBD9	BIT(21)

 #define NPCM_USB1PHYCTL_OFFSET	0x140
 #define NPCM_USB2PHYCTL_OFFSET	0x144
+#define NPCM_USB3PHYCTL_OFFSET	0x148
 #define NPCM_USBXPHYCTL_RS	BIT(28)

 /* NPCM7xx Reset registers */
@ -49,12 +56,38 @@
 #define NPCM_IPSRST3_USBPHY1	BIT(24)
 #define NPCM_IPSRST3_USBPHY2	BIT(25)

+#define NPCM_IPSRST4		0x74
+#define NPCM_IPSRST4_USBPHY3	BIT(25)
+#define NPCM_IPSRST4_USB_HOST2	BIT(31)
+
 #define NPCM_RC_RESETS_PER_REG	32
 #define NPCM_MASK_RESETS	GENMASK(4, 0)

+enum {
+	BMC_NPCM7XX = 0,
+	BMC_NPCM8XX,
+};
+
+static const u32 npxm7xx_ipsrst[] = {NPCM_IPSRST1, NPCM_IPSRST2, NPCM_IPSRST3};
+static const u32 npxm8xx_ipsrst[] = {NPCM_IPSRST1, NPCM_IPSRST2, NPCM_IPSRST3,
+	NPCM_IPSRST4};
+
+struct npcm_reset_info {
+	u32 bmc_id;
+	u32 num_ipsrst;
+	const u32 *ipsrst;
+};
+
+static const struct npcm_reset_info npxm7xx_reset_info[] = {
+	{.bmc_id = BMC_NPCM7XX, .num_ipsrst = 3, .ipsrst = npxm7xx_ipsrst}};
+static const struct npcm_reset_info npxm8xx_reset_info[] = {
+	{.bmc_id = BMC_NPCM8XX, .num_ipsrst = 4, .ipsrst = npxm8xx_ipsrst}};
+
 struct npcm_rc_data {
 	struct reset_controller_dev rcdev;
 	struct notifier_block restart_nb;
+	const struct npcm_reset_info *info;
+	struct regmap *gcr_regmap;
 	u32 sw_reset_number;
 	void __iomem *base;
 	spinlock_t lock;
@ -120,14 +153,24 @@ static int npcm_rc_status(struct reset_controller_dev *rcdev,
 static int npcm_reset_xlate(struct reset_controller_dev *rcdev,
 			    const struct of_phandle_args *reset_spec)
 {
+	struct npcm_rc_data *rc = to_rc_data(rcdev);
 	unsigned int offset, bit;
+	bool offset_found = false;
+	int off_num;

 	offset = reset_spec->args[0];
-	if (offset != NPCM_IPSRST1 && offset != NPCM_IPSRST2 &&
-	    offset != NPCM_IPSRST3) {
+	for (off_num = 0 ; off_num < rc->info->num_ipsrst ; off_num++) {
+		if (offset == rc->info->ipsrst[off_num]) {
+			offset_found = true;
+			break;
+		}
+	}
+
+	if (!offset_found) {
 		dev_err(rcdev->dev, "Error reset register (0x%x)\n", offset);
 		return -EINVAL;
 	}
+
 	bit = reset_spec->args[1];
 	if (bit >= NPCM_RC_RESETS_PER_REG) {
 		dev_err(rcdev->dev, "Error reset number (%d)\n", bit);
@ -138,45 +181,29 @@ static int npcm_reset_xlate(struct reset_controller_dev *rcdev,
 }

 static const struct of_device_id npcm_rc_match[] = {
-	{ .compatible = "nuvoton,npcm750-reset",
-		.data = (void *)"nuvoton,npcm750-gcr" },
+	{ .compatible = "nuvoton,npcm750-reset", .data = &npxm7xx_reset_info},
+	{ .compatible = "nuvoton,npcm845-reset", .data = &npxm8xx_reset_info},
 	{ }
 };

-/*
- *  The following procedure should be observed in USB PHY, USB device and
- *  USB host initialization at BMC boot
- */
-static int npcm_usb_reset(struct platform_device *pdev, struct npcm_rc_data *rc)
+static void npcm_usb_reset_npcm7xx(struct npcm_rc_data *rc)
 {
 	u32 mdlr, iprst1, iprst2, iprst3;
-	struct device *dev = &pdev->dev;
-	struct regmap *gcr_regmap;
 	u32 ipsrst1_bits = 0;
 	u32 ipsrst2_bits = NPCM_IPSRST2_USB_HOST;
 	u32 ipsrst3_bits = 0;
-	const char *gcr_dt;
-
-	gcr_dt = (const char *)
-	of_match_device(dev->driver->of_match_table, dev)->data;
-
-	gcr_regmap = syscon_regmap_lookup_by_compatible(gcr_dt);
-	if (IS_ERR(gcr_regmap)) {
-		dev_err(&pdev->dev, "Failed to find %s\n", gcr_dt);
-		return PTR_ERR(gcr_regmap);
-	}

 	/* checking which USB device is enabled */
-	regmap_read(gcr_regmap, NPCM_MDLR_OFFSET, &mdlr);
-	if (!(mdlr & NPCM_MDLR_USBD0))
+	regmap_read(rc->gcr_regmap, NPCM_MDLR_OFFSET, &mdlr);
+	if (!(mdlr & NPCM7XX_MDLR_USBD0))
 		ipsrst3_bits |= NPCM_IPSRST3_USBD0;
-	if (!(mdlr & NPCM_MDLR_USBD1))
+	if (!(mdlr & NPCM7XX_MDLR_USBD1))
 		ipsrst1_bits |= NPCM_IPSRST1_USBD1;
-	if (!(mdlr & NPCM_MDLR_USBD2_4))
+	if (!(mdlr & NPCM7XX_MDLR_USBD2_4))
 		ipsrst1_bits |= (NPCM_IPSRST1_USBD2 |
 				 NPCM_IPSRST1_USBD3 |
 				 NPCM_IPSRST1_USBD4);
-	if (!(mdlr & NPCM_MDLR_USBD0)) {
+	if (!(mdlr & NPCM7XX_MDLR_USBD0)) {
 		ipsrst1_bits |= (NPCM_IPSRST1_USBD5 |
 				 NPCM_IPSRST1_USBD6);
 		ipsrst3_bits |= (NPCM_IPSRST3_USBD7 |
@ -199,9 +226,9 @@ static int npcm_usb_reset(struct platform_device *pdev, struct npcm_rc_data *rc)
 	writel(iprst3, rc->base + NPCM_IPSRST3);

 	/* clear USB PHY RS bit */
-	regmap_update_bits(gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
+	regmap_update_bits(rc->gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
 			   NPCM_USBXPHYCTL_RS, 0);
-	regmap_update_bits(gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
+	regmap_update_bits(rc->gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
 			   NPCM_USBXPHYCTL_RS, 0);

 	/* deassert reset USB PHY */
@ -211,9 +238,9 @@ static int npcm_usb_reset(struct platform_device *pdev, struct npcm_rc_data *rc)
 	udelay(50);

 	/* set USB PHY RS bit */
-	regmap_update_bits(gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
+	regmap_update_bits(rc->gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
 			   NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS);
-	regmap_update_bits(gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
+	regmap_update_bits(rc->gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
 			   NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS);

 	/* deassert reset USB devices*/
@ -224,6 +251,118 @@ static int npcm_usb_reset(struct platform_device *pdev, struct npcm_rc_data *rc)
 	writel(iprst1, rc->base + NPCM_IPSRST1);
 	writel(iprst2, rc->base + NPCM_IPSRST2);
 	writel(iprst3, rc->base + NPCM_IPSRST3);
+}
+
+static void npcm_usb_reset_npcm8xx(struct npcm_rc_data *rc)
+{
+	u32 mdlr, iprst1, iprst2, iprst3, iprst4;
+	u32 ipsrst1_bits = 0;
+	u32 ipsrst2_bits = NPCM_IPSRST2_USB_HOST;
+	u32 ipsrst3_bits = 0;
+	u32 ipsrst4_bits = NPCM_IPSRST4_USB_HOST2 | NPCM_IPSRST4_USBPHY3;
+
+	/* checking which USB device is enabled */
+	regmap_read(rc->gcr_regmap, NPCM_MDLR_OFFSET, &mdlr);
+	if (!(mdlr & NPCM8XX_MDLR_USBD0_3)) {
+		ipsrst3_bits |= NPCM_IPSRST3_USBD0;
+		ipsrst1_bits |= (NPCM_IPSRST1_USBD1 |
+				 NPCM_IPSRST1_USBD2 |
+				 NPCM_IPSRST1_USBD3);
+	}
+	if (!(mdlr & NPCM8XX_MDLR_USBD4_7)) {
+		ipsrst1_bits |= (NPCM_IPSRST1_USBD4 |
+				 NPCM_IPSRST1_USBD5 |
+				 NPCM_IPSRST1_USBD6);
+		ipsrst3_bits |= NPCM_IPSRST3_USBD7;
+	}
+
+	if (!(mdlr & NPCM8XX_MDLR_USBD8))
+		ipsrst3_bits |= NPCM_IPSRST3_USBD8;
+	if (!(mdlr & NPCM8XX_MDLR_USBD9))
+		ipsrst3_bits |= NPCM_IPSRST3_USBD9;
+
+	/* assert reset USB PHY and USB devices */
+	iprst1 = readl(rc->base + NPCM_IPSRST1);
+	iprst2 = readl(rc->base + NPCM_IPSRST2);
+	iprst3 = readl(rc->base + NPCM_IPSRST3);
+	iprst4 = readl(rc->base + NPCM_IPSRST4);
+
+	iprst1 |= ipsrst1_bits;
+	iprst2 |= ipsrst2_bits;
+	iprst3 |= (ipsrst3_bits | NPCM_IPSRST3_USBPHY1 |
+		   NPCM_IPSRST3_USBPHY2);
+	iprst2 |= ipsrst4_bits;
+
+	writel(iprst1, rc->base + NPCM_IPSRST1);
+	writel(iprst2, rc->base + NPCM_IPSRST2);
+	writel(iprst3, rc->base + NPCM_IPSRST3);
+	writel(iprst4, rc->base + NPCM_IPSRST4);
+
+	/* clear USB PHY RS bit */
+	regmap_update_bits(rc->gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
+			   NPCM_USBXPHYCTL_RS, 0);
+	regmap_update_bits(rc->gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
+			   NPCM_USBXPHYCTL_RS, 0);
+	regmap_update_bits(rc->gcr_regmap, NPCM_USB3PHYCTL_OFFSET,
+			   NPCM_USBXPHYCTL_RS, 0);
+
+	/* deassert reset USB PHY */
+	iprst3 &= ~(NPCM_IPSRST3_USBPHY1 | NPCM_IPSRST3_USBPHY2);
+	writel(iprst3, rc->base + NPCM_IPSRST3);
+	iprst4 &= ~NPCM_IPSRST4_USBPHY3;
+	writel(iprst4, rc->base + NPCM_IPSRST4);
+
+	/* set USB PHY RS bit */
+	regmap_update_bits(rc->gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
+			   NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS);
+	regmap_update_bits(rc->gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
+			   NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS);
+	regmap_update_bits(rc->gcr_regmap, NPCM_USB3PHYCTL_OFFSET,
+			   NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS);
+
+	/* deassert reset USB devices*/
+	iprst1 &= ~ipsrst1_bits;
+	iprst2 &= ~ipsrst2_bits;
+	iprst3 &= ~ipsrst3_bits;
+	iprst4 &= ~ipsrst4_bits;
+
+	writel(iprst1, rc->base + NPCM_IPSRST1);
+	writel(iprst2, rc->base + NPCM_IPSRST2);
+	writel(iprst3, rc->base + NPCM_IPSRST3);
+	writel(iprst4, rc->base + NPCM_IPSRST4);
+}
+
+/*
+ *  The following procedure should be observed in USB PHY, USB device and
+ *  USB host initialization at BMC boot
+ */
+static int npcm_usb_reset(struct platform_device *pdev, struct npcm_rc_data *rc)
+{
+	struct device *dev = &pdev->dev;
+
+	rc->gcr_regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "nuvoton,sysgcr");
+	if (IS_ERR(rc->gcr_regmap)) {
+		dev_warn(&pdev->dev, "Failed to find nuvoton,sysgcr property, please update the device tree\n");
+		dev_info(&pdev->dev, "Using nuvoton,npcm750-gcr for Poleg backward compatibility\n");
+		rc->gcr_regmap = syscon_regmap_lookup_by_compatible("nuvoton,npcm750-gcr");
+		if (IS_ERR(rc->gcr_regmap)) {
+			dev_err(&pdev->dev, "Failed to find nuvoton,npcm750-gcr");
+			return PTR_ERR(rc->gcr_regmap);
+		}
+	}
+
+	rc->info = (const struct npcm_reset_info *)
+			of_match_device(dev->driver->of_match_table, dev)->data;
+	switch (rc->info->bmc_id) {
+	case BMC_NPCM7XX:
+		npcm_usb_reset_npcm7xx(rc);
+		break;
+	case BMC_NPCM8XX:
+		npcm_usb_reset_npcm8xx(rc);
+		break;
+	default:
+		return -ENODEV;
+	}

 	return 0;
 }
--- a/drivers/reset/reset-sunplus.c
+++ b/drivers/reset/reset-sunplus.c
@ -0,0 +1,212 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * SP7021 reset driver
+ *
+ * Copyright (C) Sunplus Technology Co., Ltd.
+ *       All rights reserved.
+ */
+
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/reboot.h>
+
+/* HIWORD_MASK_REG BITS */
+#define BITS_PER_HWM_REG	16
+
+/* resets HW info: reg_index_shift */
+static const u32 sp_resets[] = {
+/* SP7021: mo_reset0 ~ mo_reset9 */
+	0x00,
+	0x02,
+	0x03,
+	0x04,
+	0x05,
+	0x06,
+	0x07,
+	0x08,
+	0x09,
+	0x0a,
+	0x0b,
+	0x0d,
+	0x0e,
+	0x0f,
+	0x10,
+	0x12,
+	0x14,
+	0x15,
+	0x16,
+	0x17,
+	0x18,
+	0x19,
+	0x1a,
+	0x1b,
+	0x1c,
+	0x1d,
+	0x1e,
+	0x1f,
+	0x20,
+	0x21,
+	0x22,
+	0x23,
+	0x24,
+	0x25,
+	0x26,
+	0x2a,
+	0x2b,
+	0x2d,
+	0x2e,
+	0x30,
+	0x31,
+	0x32,
+	0x33,
+	0x3d,
+	0x3e,
+	0x3f,
+	0x42,
+	0x44,
+	0x4b,
+	0x4c,
+	0x4d,
+	0x4e,
+	0x4f,
+	0x50,
+	0x55,
+	0x60,
+	0x61,
+	0x6a,
+	0x6f,
+	0x70,
+	0x73,
+	0x74,
+	0x86,
+	0x8a,
+	0x8b,
+	0x8d,
+	0x8e,
+	0x8f,
+	0x90,
+	0x92,
+	0x93,
+	0x94,
+	0x95,
+	0x96,
+	0x97,
+	0x98,
+	0x99,
+};
+
+struct sp_reset {
+	struct reset_controller_dev rcdev;
+	struct notifier_block notifier;
+	void __iomem *base;
+};
+
+static inline struct sp_reset *to_sp_reset(struct reset_controller_dev *rcdev)
+{
+	return container_of(rcdev, struct sp_reset, rcdev);
+}
+
+static int sp_reset_update(struct reset_controller_dev *rcdev,
+			   unsigned long id, bool assert)
+{
+	struct sp_reset *reset = to_sp_reset(rcdev);
+	int index = sp_resets[id] / BITS_PER_HWM_REG;
+	int shift = sp_resets[id] % BITS_PER_HWM_REG;
+	u32 val;
+
+	val = (1 << (16 + shift)) | (assert << shift);
+	writel(val, reset->base + (index * 4));
+
+	return 0;
+}
+
+static int sp_reset_assert(struct reset_controller_dev *rcdev,
+			   unsigned long id)
+{
+	return sp_reset_update(rcdev, id, true);
+}
+
+static int sp_reset_deassert(struct reset_controller_dev *rcdev,
+			     unsigned long id)
+{
+	return sp_reset_update(rcdev, id, false);
+}
+
+static int sp_reset_status(struct reset_controller_dev *rcdev,
+			   unsigned long id)
+{
+	struct sp_reset *reset = to_sp_reset(rcdev);
+	int index = sp_resets[id] / BITS_PER_HWM_REG;
+	int shift = sp_resets[id] % BITS_PER_HWM_REG;
+	u32 reg;
+
+	reg = readl(reset->base + (index * 4));
+
+	return !!(reg & BIT(shift));
+}
+
+static const struct reset_control_ops sp_reset_ops = {
+	.assert   = sp_reset_assert,
+	.deassert = sp_reset_deassert,
+	.status   = sp_reset_status,
+};
+
+static int sp_restart(struct notifier_block *nb, unsigned long mode,
+		      void *cmd)
+{
+	struct sp_reset *reset = container_of(nb, struct sp_reset, notifier);
+
+	sp_reset_assert(&reset->rcdev, 0);
+	sp_reset_deassert(&reset->rcdev, 0);
+
+	return NOTIFY_DONE;
+}
+
+static int sp_reset_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct sp_reset *reset;
+	struct resource *res;
+	int ret;
+
+	reset = devm_kzalloc(dev, sizeof(*reset), GFP_KERNEL);
+	if (!reset)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	reset->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(reset->base))
+		return PTR_ERR(reset->base);
+
+	reset->rcdev.ops = &sp_reset_ops;
+	reset->rcdev.owner = THIS_MODULE;
+	reset->rcdev.of_node = dev->of_node;
+	reset->rcdev.nr_resets = resource_size(res) / 4 * BITS_PER_HWM_REG;
+
+	ret = devm_reset_controller_register(dev, &reset->rcdev);
+	if (ret)
+		return ret;
+
+	reset->notifier.notifier_call = sp_restart;
+	reset->notifier.priority = 192;
+
+	return register_restart_handler(&reset->notifier);
+}
+
+static const struct of_device_id sp_reset_dt_ids[] = {
+	{.compatible = "sunplus,sp7021-reset",},
+	{ /* sentinel */ },
+};
+
+static struct platform_driver sp_reset_driver = {
+	.probe = sp_reset_probe,
+	.driver = {
+		.name			= "sunplus-reset",
+		.of_match_table		= sp_reset_dt_ids,
+		.suppress_bind_attrs	= true,
+	},
+};
+builtin_platform_driver(sp_reset_driver);
--- a/include/dt-bindings/clock/nuvoton,npcm845-clk.h
+++ b/include/dt-bindings/clock/nuvoton,npcm845-clk.h
@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2021 Nuvoton Technologies.
+ * Author: Tomer Maimon <tomer.maimon@nuvoton.com>
+ *
+ * Device Tree binding constants for NPCM8XX clock controller.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_NPCM8XX_H
+#define __DT_BINDINGS_CLOCK_NPCM8XX_H
+
+#define NPCM8XX_CLK_CPU		0
+#define NPCM8XX_CLK_GFX_PIXEL	1
+#define NPCM8XX_CLK_MC		2
+#define NPCM8XX_CLK_ADC		3
+#define NPCM8XX_CLK_AHB		4
+#define NPCM8XX_CLK_TIMER	5
+#define NPCM8XX_CLK_UART	6
+#define NPCM8XX_CLK_UART2	7
+#define NPCM8XX_CLK_MMC		8
+#define NPCM8XX_CLK_SPI3	9
+#define NPCM8XX_CLK_PCI		10
+#define NPCM8XX_CLK_AXI		11
+#define NPCM8XX_CLK_APB4	12
+#define NPCM8XX_CLK_APB3	13
+#define NPCM8XX_CLK_APB2	14
+#define NPCM8XX_CLK_APB1	15
+#define NPCM8XX_CLK_APB5	16
+#define NPCM8XX_CLK_CLKOUT	17
+#define NPCM8XX_CLK_GFX		18
+#define NPCM8XX_CLK_SU		19
+#define NPCM8XX_CLK_SU48	20
+#define NPCM8XX_CLK_SDHC	21
+#define NPCM8XX_CLK_SPI0	22
+#define NPCM8XX_CLK_SPI1	23
+#define NPCM8XX_CLK_SPIX	24
+#define NPCM8XX_CLK_RG		25
+#define NPCM8XX_CLK_RCP		26
+#define NPCM8XX_CLK_PRE_ADC	27
+#define NPCM8XX_CLK_ATB		28
+#define NPCM8XX_CLK_PRE_CLK	29
+#define NPCM8XX_CLK_TH		30
+#define NPCM8XX_CLK_REFCLK	31
+#define NPCM8XX_CLK_SYSBYPCK	32
+#define NPCM8XX_CLK_MCBYPCK	33
+
+#define NPCM8XX_NUM_CLOCKS	(NPCM8XX_CLK_MCBYPCK + 1)
+
+#endif
--- a/include/dt-bindings/clock/sunplus,sp7021-clkc.h
+++ b/include/dt-bindings/clock/sunplus,sp7021-clkc.h
@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) Sunplus Technology Co., Ltd.
+ *       All rights reserved.
+ */
+#ifndef _DT_BINDINGS_CLOCK_SUNPLUS_SP7021_H
+#define _DT_BINDINGS_CLOCK_SUNPLUS_SP7021_H
+
+/* gates */
+#define CLK_RTC         0
+#define CLK_OTPRX       1
+#define CLK_NOC         2
+#define CLK_BR          3
+#define CLK_SPIFL       4
+#define CLK_PERI0       5
+#define CLK_PERI1       6
+#define CLK_STC0        7
+#define CLK_STC_AV0     8
+#define CLK_STC_AV1     9
+#define CLK_STC_AV2     10
+#define CLK_UA0         11
+#define CLK_UA1         12
+#define CLK_UA2         13
+#define CLK_UA3         14
+#define CLK_UA4         15
+#define CLK_HWUA        16
+#define CLK_DDC0        17
+#define CLK_UADMA       18
+#define CLK_CBDMA0      19
+#define CLK_CBDMA1      20
+#define CLK_SPI_COMBO_0 21
+#define CLK_SPI_COMBO_1 22
+#define CLK_SPI_COMBO_2 23
+#define CLK_SPI_COMBO_3 24
+#define CLK_AUD         25
+#define CLK_USBC0       26
+#define CLK_USBC1       27
+#define CLK_UPHY0       28
+#define CLK_UPHY1       29
+#define CLK_I2CM0       30
+#define CLK_I2CM1       31
+#define CLK_I2CM2       32
+#define CLK_I2CM3       33
+#define CLK_PMC         34
+#define CLK_CARD_CTL0   35
+#define CLK_CARD_CTL1   36
+#define CLK_CARD_CTL4   37
+#define CLK_BCH         38
+#define CLK_DDFCH       39
+#define CLK_CSIIW0      40
+#define CLK_CSIIW1      41
+#define CLK_MIPICSI0    42
+#define CLK_MIPICSI1    43
+#define CLK_HDMI_TX     44
+#define CLK_VPOST       45
+#define CLK_TGEN        46
+#define CLK_DMIX        47
+#define CLK_TCON        48
+#define CLK_GPIO        49
+#define CLK_MAILBOX     50
+#define CLK_SPIND       51
+#define CLK_I2C2CBUS    52
+#define CLK_SEC         53
+#define CLK_DVE         54
+#define CLK_GPOST0      55
+#define CLK_OSD0        56
+#define CLK_DISP_PWM    57
+#define CLK_UADBG       58
+#define CLK_FIO_CTL     59
+#define CLK_FPGA        60
+#define CLK_L2SW        61
+#define CLK_ICM         62
+#define CLK_AXI_GLOBAL  63
+
+/* plls */
+#define PLL_A           64
+#define PLL_E           65
+#define PLL_E_2P5       66
+#define PLL_E_25        67
+#define PLL_E_112P5     68
+#define PLL_F           69
+#define PLL_TV          70
+#define PLL_TV_A        71
+#define PLL_SYS         72
+
+#define CLK_MAX         73
+
+#endif
--- a/include/dt-bindings/reset/sunplus,sp7021-reset.h
+++ b/include/dt-bindings/reset/sunplus,sp7021-reset.h
@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) Sunplus Technology Co., Ltd.
+ *       All rights reserved.
+ */
+#ifndef _DT_BINDINGS_RST_SUNPLUS_SP7021_H
+#define _DT_BINDINGS_RST_SUNPLUS_SP7021_H
+
+#define RST_SYSTEM              0
+#define RST_RTC                 1
+#define RST_IOCTL               2
+#define RST_IOP                 3
+#define RST_OTPRX               4
+#define RST_NOC                 5
+#define RST_BR                  6
+#define RST_RBUS_L00            7
+#define RST_SPIFL               8
+#define RST_SDCTRL0             9
+#define RST_PERI0               10
+#define RST_A926                11
+#define RST_UMCTL2              12
+#define RST_PERI1               13
+#define RST_DDR_PHY0            14
+#define RST_ACHIP               15
+#define RST_STC0                16
+#define RST_STC_AV0             17
+#define RST_STC_AV1             18
+#define RST_STC_AV2             19
+#define RST_UA0                 20
+#define RST_UA1                 21
+#define RST_UA2                 22
+#define RST_UA3                 23
+#define RST_UA4                 24
+#define RST_HWUA                25
+#define RST_DDC0                26
+#define RST_UADMA               27
+#define RST_CBDMA0              28
+#define RST_CBDMA1              29
+#define RST_SPI_COMBO_0         30
+#define RST_SPI_COMBO_1         31
+#define RST_SPI_COMBO_2         32
+#define RST_SPI_COMBO_3         33
+#define RST_AUD                 34
+#define RST_USBC0               35
+#define RST_USBC1               36
+#define RST_UPHY0               37
+#define RST_UPHY1               38
+#define RST_I2CM0               39
+#define RST_I2CM1               40
+#define RST_I2CM2               41
+#define RST_I2CM3               42
+#define RST_PMC                 43
+#define RST_CARD_CTL0           44
+#define RST_CARD_CTL1           45
+#define RST_CARD_CTL4           46
+#define RST_BCH                 47
+#define RST_DDFCH               48
+#define RST_CSIIW0              49
+#define RST_CSIIW1              50
+#define RST_MIPICSI0            51
+#define RST_MIPICSI1            52
+#define RST_HDMI_TX             53
+#define RST_VPOST               54
+#define RST_TGEN                55
+#define RST_DMIX                56
+#define RST_TCON                57
+#define RST_INTERRUPT           58
+#define RST_RGST                59
+#define RST_GPIO                60
+#define RST_RBUS_TOP            61
+#define RST_MAILBOX             62
+#define RST_SPIND               63
+#define RST_I2C2CBUS            64
+#define RST_SEC                 65
+#define RST_DVE                 66
+#define RST_GPOST0              67
+#define RST_OSD0                68
+#define RST_DISP_PWM            69
+#define RST_UADBG               70
+#define RST_DUMMY_MASTER        71
+#define RST_FIO_CTL             72
+#define RST_FPGA                73
+#define RST_L2SW                74
+#define RST_ICM                 75
+#define RST_AXI_GLOBAL          76
+
+#endif