API to set time namespace offsets for children processes, i.e.:
echo "$clockid $offset_sec $offset_nsec" > /proc/self/timens_offsets
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-28-dima@arista.com
The VVAR page layout depends on whether a task belongs to the root or
non-root time namespace. Whenever a task changes its namespace, the VVAR
page tables are cleared and then they will be re-faulted with a
corresponding layout.
Co-developed-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-27-dima@arista.com
As timens page has offsets to data on VVAR page VVAR is going
to be accessed shortly. Set it up with timens in one page fault
as optimization.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-26-dima@arista.com
If a task belongs to a time namespace then the VVAR page which contains
the system wide VDSO data is replaced with a namespace specific page
which has the same layout as the VVAR page.
Co-developed-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-25-dima@arista.com
VDSO support for Time namespace needs to set up a page with the same
layout as VVAR. That timens page will be placed on position of VVAR page
inside namespace. That page contains time namespace clock offsets and it
has vdso_data->seq set to 1 to enforce the slow path and
vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time namespace
handling path.
Allocate the timens page during namespace creation. Setup the offsets
when the first task enters the ns and freeze them to guarantee the pace
of monotonic/boottime clocks and to avoid breakage of applications.
The design decision is to have a global offset_lock which is used during
namespace offsets setup and to freeze offsets when the first task joins the
new time namespace. That is better in terms of memory usage compared to
having a per namespace mutex that's used only during the setup period.
Suggested-by: Andy Lutomirski <luto@kernel.org>
Based-on-work-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-24-dima@arista.com
To support time namespaces in the VDSO with a minimal impact on regular non
time namespace affected tasks, the namespace handling needs to be hidden in
a slow path.
The most obvious place is vdso_seq_begin(). If a task belongs to a time
namespace then the VVAR page which contains the system wide VDSO data is
replaced with a namespace specific page which has the same layout as the
VVAR page. That page has vdso_data->seq set to 1 to enforce the slow path
and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time
namespace handling path.
The extra check in the case that vdso_data->seq is odd, e.g. a concurrent
update of the VDSO data is in progress, is not really affecting regular
tasks which are not part of a time namespace as the task is spin waiting
for the update to finish and vdso_data->seq to become even again.
If a time namespace task hits that code path, it invokes the corresponding
time getter function which retrieves the real VVAR page, reads host time
and then adds the offset for the requested clock which is stored in the
special VVAR page.
Allocate the time namespace page among VVAR pages and place vdso_data on
it. Provide __arch_get_timens_vdso_data() helper for VDSO code to get the
code-relative position of VVARs on that special page.
Co-developed-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-23-dima@arista.com
VDSO support for time namespaces needs to set up a page with the same
layout as VVAR. That timens page will be placed on position of VVAR page
inside namespace. That page has vdso_data->seq set to 1 to enforce
the slow path and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce
the time namespace handling path.
To prepare the time namespace page the kernel needs to know the vdso_data
offset. Provide arch_get_vdso_data() helper for locating vdso_data on VVAR
page.
Co-developed-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-22-dima@arista.com
To support time namespaces in the vdso with a minimal impact on regular non
time namespace affected tasks, the namespace handling needs to be hidden in
a slow path.
The most obvious place is vdso_seq_begin(). If a task belongs to a time
namespace then the VVAR page which contains the system wide vdso data is
replaced with a namespace specific page which has the same layout as the
VVAR page. That page has vdso_data->seq set to 1 to enforce the slow path
and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time
namespace handling path.
The extra check in the case that vdso_data->seq is odd, e.g. a concurrent
update of the vdso data is in progress, is not really affecting regular
tasks which are not part of a time namespace as the task is spin waiting
for the update to finish and vdso_data->seq to become even again.
If a time namespace task hits that code path, it invokes the corresponding
time getter function which retrieves the real VVAR page, reads host time
and then adds the offset for the requested clock which is stored in the
special VVAR page.
If VDSO time namespace support is disabled the whole magic is compiled out.
Initial testing shows that the disabled case is almost identical to the
host case which does not take the slow timens path. With the special timens
page installed the performance hit is constant time and in the range of
5-7%.
For the vdso functions which are not using the sequence count an
unconditional check for vdso_data->clock_mode is added which switches to
the real vdso when the clock_mode is VCLOCK_TIMENS.
[avagin: Make do_hres_timens() work with raw clocks too: choose vdso_data
pointer by CS_RAW offset.]
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-21-dima@arista.com
Forbid splitting VVAR VMA resulting in a stricter ABI and reducing the
amount of corner-cases to consider while working further on VDSO time
namespace support.
As the offset from timens to VVAR page is computed compile-time, the pages
in VVAR should stay together and not being partically mremap()'ed.
Co-developed-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-20-dima@arista.com
Make sure that /proc/uptime is adjusted to the tasks time namespace.
Co-developed-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-19-dima@arista.com
clock_nanosleep() accepts absolute values of expiration time, if the
TIMER_ABSTIME flag is set. This value is in the tasks time namespace,
which has to be converted to the host time namespace.
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-18-dima@arista.com
clock_nanosleep() accepts absolute values of expiration time when
TIMER_ABSTIME flag is set. This absolute value is inside the task's
time namespace, and has to be converted to the host's time.
There is timens_ktime_to_host() helper for converting time, but
it accepts ktime argument.
As a preparation, make hrtimer_nanosleep() accept a clock value in ktime
instead of timespec64.
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-17-dima@arista.com
clock_nanosleep() accepts absolute values of expiration time when the
TIMER_ABSTIME flag is set. This absolute value is inside the task's
time namespace and has to be converted to the host's time.
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-16-dima@arista.com
Wire timer_settime() syscall into time namespace virtualization.
sys_timer_settime() calls the ktime->timer_set() callback. Right now,
common_timer_set() is the only implementation for the callback.
The user-supplied expiry value is converted from timespec64 to ktime and
then timens_ktime_to_host() can be used to convert namespace's time to the
host time.
Inside a time namespace kernel's time differs by a fixed offset from a
user-supplied time, but only absolute values (TIMER_ABSTIME) must be
converted.
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-15-dima@arista.com
timerfd_settime() accepts an absolute value of the expiration time if
TFD_TIMER_ABSTIME is specified. This value is in the task's time namespace
and has to be converted to the host's time namespace.
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-14-dima@arista.com
The helper subtracts namespace's clock offset from the given time
and ensures that the result is within [0, KTIME_MAX].
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-13-dima@arista.com
Adjust monotonic and boottime clocks with per-timens offsets. As the
result a process inside time namespace will see timers and clocks corrected
to offsets that were set when the namespace was created
Note that applications usually go through vDSO to get time, which is not
yet adjusted. Further changes will complete time namespace virtualisation
with vDSO support.
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-12-dima@arista.com
Now, when the clock_get_ktime() callback exists, the suboptimal
timespec64-based conversion can be removed from common_timer_get().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-11-dima@arista.com
The callsite in common_timer_get() has already a comment:
/*
* The timespec64 based conversion is suboptimal, but it's not
* worth to implement yet another callback.
*/
kc->clock_get(timr->it_clock, &ts64);
now = timespec64_to_ktime(ts64);
The upcoming support for time namespaces requires to have access to:
- The time in a task's time namespace for sys_clock_gettime()
- The time in the root name space for common_timer_get()
That adds a valid reason to finally implement a separate callback which
returns the time in ktime_t format.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-10-dima@arista.com
The upcoming support for time namespaces requires to have access to:
- The time in a task's time namespace for sys_clock_gettime()
- The time in the root name space for common_timer_get()
Wire up alarm bases with get_timespec().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-9-dima@arista.com
The upcoming support for time namespaces requires to have access to:
- The time in a tasks time namespace for sys_clock_gettime()
- The time in the root name space for common_timer_get()
struct alarm_base needs to follow the same naming convention, so rename
.gettime() callback into get_ktime() as a preparation for introducing
get_timespec().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-8-dima@arista.com
The upcoming support for time namespaces requires to have access to:
- The time in a task's time namespace for sys_clock_gettime()
- The time in the root name space for common_timer_get()
That adds a valid reason to finally implement a separate callback which
returns the time in ktime_t format in (struct k_clock).
As a preparation ground for introducing clock_get_ktime(), the original
callback clock_get() was renamed into clock_get_timespec().
Reflect the renaming into the callback implementations.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-7-dima@arista.com
The upcoming support for time namespaces requires to have access to:
- The time in a task's time namespace for sys_clock_gettime()
- The time in the root name space for common_timer_get()
That adds a valid reason to finally implement a separate callback which
returns the time in ktime_t format, rather than in (struct timespec).
Rename the clock_get() callback to clock_get_timespec() as a preparation
for introducing clock_get_ktime().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-6-dima@arista.com
Introduce offsets for time namespace. They will contain an adjustment
needed to convert clocks to/from host's.
A new namespace is created with the same offsets as the time namespace
of the current process.
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-5-dima@arista.com
Time Namespace isolates clock values.
The kernel provides access to several clocks CLOCK_REALTIME,
CLOCK_MONOTONIC, CLOCK_BOOTTIME, etc.
CLOCK_REALTIME
System-wide clock that measures real (i.e., wall-clock) time.
CLOCK_MONOTONIC
Clock that cannot be set and represents monotonic time since
some unspecified starting point.
CLOCK_BOOTTIME
Identical to CLOCK_MONOTONIC, except it also includes any time
that the system is suspended.
For many users, the time namespace means the ability to changes date and
time in a container (CLOCK_REALTIME). Providing per namespace notions of
CLOCK_REALTIME would be complex with a massive overhead, but has a dubious
value.
But in the context of checkpoint/restore functionality, monotonic and
boottime clocks become interesting. Both clocks are monotonic with
unspecified starting points. These clocks are widely used to measure time
slices and set timers. After restoring or migrating processes, it has to be
guaranteed that they never go backward. In an ideal case, the behavior of
these clocks should be the same as for a case when a whole system is
suspended. All this means that it is required to set CLOCK_MONOTONIC and
CLOCK_BOOTTIME clocks, which can be achieved by adding per-namespace
offsets for clocks.
A time namespace is similar to a pid namespace in the way how it is
created: unshare(CLONE_NEWTIME) system call creates a new time namespace,
but doesn't set it to the current process. Then all children of the process
will be born in the new time namespace, or a process can use the setns()
system call to join a namespace.
This scheme allows setting clock offsets for a namespace, before any
processes appear in it.
All available clone flags have been used, so CLONE_NEWTIME uses the highest
bit of CSIGNAL. It means that it can be used only with the unshare() and
the clone3() system calls.
[ tglx: Adjusted paragraph about clone3() to reality and massaged the
changelog a bit. ]
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://criu.org/Time_namespace
Link: https://lists.openvz.org/pipermail/criu/2018-June/041504.html
Link: https://lore.kernel.org/r/20191112012724.250792-4-dima@arista.com
VDSO_HAS_32BIT_FALLBACK has been removed from the core since
the architectures that support the generic vDSO library have
been converted to support the 32 bit fallbacks.
Remove unused VDSO_HAS_32BIT_FALLBACK from x86 vdso.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20190830135902.20861-9-vincenzo.frascino@arm.com
VDSO_HAS_32BIT_FALLBACK has been removed from the core since
the architectures that support the generic vDSO library have
been converted to support the 32 bit fallbacks.
Remove unused VDSO_HAS_32BIT_FALLBACK from mips vdso.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul Burton <paul.burton@mips.com>
Link: https://lore.kernel.org/r/20190830135902.20861-8-vincenzo.frascino@arm.com
VDSO_HAS_32BIT_FALLBACK has been removed from the core since
the architectures that support the generic vDSO library have
been converted to support the 32 bit fallbacks.
Remove unused VDSO_HAS_32BIT_FALLBACK from arm64 compat vdso.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20190830135902.20861-7-vincenzo.frascino@arm.com
Since all the architectures that support the generic vDSO library have
been converted to support the 32 bit fallbacks it is not required
anymore to check the return value of __cvdso_clock_get*time32_common()
before updating the old_timespec fields.
Remove the related checks from the generic vdso library.
References: c60a32ea4f ("lib/vdso/32: Provide legacy syscall fallbacks")
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20190830135902.20861-6-vincenzo.frascino@arm.com
VDSO_HAS_32BIT_FALLBACK was introduced to address a regression which
caused seccomp to deny access to the applications to clock_gettime64()
and clock_getres64() because they are not enabled in the existing
filters.
The purpose of VDSO_HAS_32BIT_FALLBACK was to simplify the conditional
implementation of __cvdso_clock_get*time32() variants.
Now that all the architectures that support the generic vDSO library
have been converted to support the 32 bit fallbacks the conditional
can be removed.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20190830135902.20861-5-vincenzo.frascino@arm.com
References: c60a32ea4f ("lib/vdso/32: Provide legacy syscall fallbacks")
clock_gettime32 and clock_getres_time32 should be compiled only with a
32 bit vdso library.
Exclude these symbols when BUILD_VDSO32 is not defined.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20190830135902.20861-3-vincenzo.frascino@arm.com
Setting BUILD_VDSO32 is required to expose the legacy 32bit interfaces in
the generic VDSO code which are going to be hidden behind an #ifdef
BUILD_VDSO32.
The 32bit fallbacks are necessary to remove the existing
VDSO_HAS_32BIT_FALLBACK hackery.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/87tv4zq9dc.fsf@nanos.tec.linutronix.de
clock_gettime32 and clock_getres_time32 should be compiled only with the
32 bit vdso library.
Expose BUILD_VDSO32 when arm64 compat is compiled, to provide an
indication to the generic library to include these symbols.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20190830135902.20861-2-vincenzo.frascino@arm.com
Fix the following sparse warning in the generic vDSO library:
linux/lib/vdso/gettimeofday.c:224:5: warning: symbol
'__cvdso_clock_getres' was not declared. Should it be static?
Make it static and also mark it __maybe_unsed.
Fixes: 502a590a17 ("lib/vdso: Move fallback invocation to the callers")
Reported-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191128111719.8282-1-vincenzo.frascino@arm.com
Instead of issueing a warning if sched_clock_register() is called from a
context where IRQs are enabled, the code now ensures that IRQs are indeed
disabled.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200107010630.954648-1-paul@crapouillou.net
Using compat_sys_getitimer and compat_sys_setitimer on alpha
causes a link failure in the Alpha tinyconfig and other configurations
that turn off CONFIG_POSIX_TIMERS.
Use the same #ifdef check for the stub version as well.
Fixes: 4c22ea2b91 ("y2038: use compat_{get,set}_itimer on alpha")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191207191043.656328-1-arnd@arndb.de
Several fixes for RISC-V:
- Fix function graph trace support
- Prefix the CSR IRQ_* macro names with "RV_", to avoid collisions
with macros elsewhere in the Linux kernel tree named "IRQ_TIMER"
- Use __pa_symbol() when computing the physical address of a kernel
symbol, rather than __pa()
- Mark the RISC-V port as supporting GCOV
One DT addition:
- Describe the L2 cache controller in the FU540 DT file
One documentation update:
- Add patch acceptance guideline documentation
-----BEGIN PGP SIGNATURE-----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=8HSd
-----END PGP SIGNATURE-----
Merge tag 'riscv/for-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"Several fixes for RISC-V:
- Fix function graph trace support
- Prefix the CSR IRQ_* macro names with "RV_", to avoid collisions
with macros elsewhere in the Linux kernel tree named "IRQ_TIMER"
- Use __pa_symbol() when computing the physical address of a kernel
symbol, rather than __pa()
- Mark the RISC-V port as supporting GCOV
One DT addition:
- Describe the L2 cache controller in the FU540 DT file
One documentation update:
- Add patch acceptance guideline documentation"
* tag 'riscv/for-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
Documentation: riscv: add patch acceptance guidelines
riscv: prefix IRQ_ macro names with an RV_ namespace
clocksource: riscv: add notrace to riscv_sched_clock
riscv: ftrace: correct the condition logic in function graph tracer
riscv: dts: Add DT support for SiFive L2 cache controller
riscv: gcov: enable gcov for RISC-V
riscv: mm: use __pa_symbol for kernel symbols
Formalize, in kernel documentation, the patch acceptance policy for
arch/riscv. In summary, it states that as maintainers, we plan to
only accept patches for new modules or extensions that have been
frozen or ratified by the RISC-V Foundation.
We've been following these guidelines for the past few months. In the
meantime, we've received quite a bit of feedback that it would be
helpful to have these guidelines formally documented.
Based on a suggestion from Matthew Wilcox, we also add a link to this
file to Documentation/process/index.rst, to make this document easier
to find. The format of this document has also been changed to align
to the format outlined in the maintainer entry profiles, in accordance
with comments from Jon Corbet and Dan Williams.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Krste Asanovic <krste@berkeley.edu>
Cc: Andrew Waterman <waterman@eecs.berkeley.edu>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
"IRQ_TIMER", used in the arch/riscv CSR header file, is a sufficiently
generic macro name that it's used by several source files across the
Linux code base. Some of these other files ultimately include the
arch/riscv CSR include file, causing collisions. Fix by prefixing the
RISC-V csr.h IRQ_ macro names with an RV_ prefix.
Fixes: a4c3733d32 ("riscv: abstract out CSR names for supervisor vs machine mode")
Reported-by: Olof Johansson <olof@lixom.net>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Merge misc fixes from Andrew Morton:
"17 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
hexagon: define ioremap_uc
ocfs2: fix the crash due to call ocfs2_get_dlm_debug once less
ocfs2: call journal flush to mark journal as empty after journal recovery when mount
mm/hugetlb: defer freeing of huge pages if in non-task context
mm/gup: fix memory leak in __gup_benchmark_ioctl
mm/oom: fix pgtables units mismatch in Killed process message
fs/posix_acl.c: fix kernel-doc warnings
hexagon: work around compiler crash
hexagon: parenthesize registers in asm predicates
fs/namespace.c: make to_mnt_ns() static
fs/nsfs.c: include headers for missing declarations
fs/direct-io.c: include fs/internal.h for missing prototype
mm: move_pages: return valid node id in status if the page is already on the target node
memcg: account security cred as well to kmemcg
kcov: fix struct layout for kcov_remote_arg
mm/zsmalloc.c: fix the migrated zspage statistics.
mm/memory_hotplug: shrink zones when offlining memory
- performance regression: only get a label reference if the fast
path check fails
- fix aa_xattrs_match() may sleep while holding a RCU lock
- fix bind mounts aborting with -ENOMEM
-----BEGIN PGP SIGNATURE-----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=uw+S
-----END PGP SIGNATURE-----
Merge tag 'apparmor-pr-2020-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor fixes from John Johansen:
- performance regression: only get a label reference if the fast path
check fails
- fix aa_xattrs_match() may sleep while holding a RCU lock
- fix bind mounts aborting with -ENOMEM
* tag 'apparmor-pr-2020-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: fix aa_xattrs_match() may sleep while holding a RCU lock
apparmor: only get a label reference if the fast path check fails
apparmor: fix bind mounts aborting with -ENOMEM
aa_xattrs_match() is unfortunately calling vfs_getxattr_alloc() from a
context protected by an rcu_read_lock. This can not be done as
vfs_getxattr_alloc() may sleep regardles of the gfp_t value being
passed to it.
Fix this by breaking the rcu_read_lock on the policy search when the
xattr match feature is requested and restarting the search if a policy
changes occur.
Fixes: 8e51f9087f ("apparmor: Add support for attaching profiles via xattr, presence and value")
Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John Johansen <john.johansen@canonical.com>
- Fill the struct cacheinfo shared_cpu_map field with sensible values,
notably avoiding issues with perf which was unhappy in the absence of
these values.
- A boot fix for Loongson 2E & 2F machines which was fallout from some
refactoring performed this cycle.
- A Kconfig dependency fix for the Loongson CPU HWMon driver.
- A couple of VDSO fixes, ensuring gettimeofday() behaves appropriately
for kernel configurations that don't include support for a clocksource
the VDSO can use & fixing the calling convention for the n32 & n64
VDSOs which would previously clobber the $gp/$28 register.
- A build fix for vmlinuz compressed images which were inappropriately
building with -fsanitize-coverage despite not being part of the kernel
proper, then failing to link due to the missing
__sanitizer_cov_trace_pc() function.
- A couple of eBPF JIT fixes, including disabling it for MIPS32 due to a
large number of issues with the code generated there & reflecting ISA
dependencies in Kconfig to enforce that systems which don't support
the JIT must include the interpreter.
-----BEGIN PGP SIGNATURE-----
iIwEABYIADQWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXhDvJxYccGF1bGJ1cnRv
bkBrZXJuZWwub3JnAAoJED6nn6y1dQDdULcBAJCyB5cBMSvl14q7jEICUKIZacaW
OGYrhvpr6g9Dtg+fAP0WpYbIdY/JsydXlJC97CTm6saI5Oh2TDe6Cnl+kfloBw==
=dadp
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_5.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
"A collection of MIPS fixes:
- Fill the struct cacheinfo shared_cpu_map field with sensible
values, notably avoiding issues with perf which was unhappy in the
absence of these values.
- A boot fix for Loongson 2E & 2F machines which was fallout from
some refactoring performed this cycle.
- A Kconfig dependency fix for the Loongson CPU HWMon driver.
- A couple of VDSO fixes, ensuring gettimeofday() behaves
appropriately for kernel configurations that don't include support
for a clocksource the VDSO can use & fixing the calling convention
for the n32 & n64 VDSOs which would previously clobber the $gp/$28
register.
- A build fix for vmlinuz compressed images which were
inappropriately building with -fsanitize-coverage despite not being
part of the kernel proper, then failing to link due to the missing
__sanitizer_cov_trace_pc() function.
- A couple of eBPF JIT fixes, including disabling it for MIPS32 due
to a large number of issues with the code generated there &
reflecting ISA dependencies in Kconfig to enforce that systems
which don't support the JIT must include the interpreter"
* tag 'mips_fixes_5.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Avoid VDSO ABI breakage due to global register variable
MIPS: BPF: eBPF JIT: check for MIPS ISA compliance in Kconfig
MIPS: BPF: Disable MIPS32 eBPF JIT
MIPS: Prevent link failure with kcov instrumentation
MIPS: Kconfig: Use correct form for 'depends on'
mips: Fix gettimeofday() in the vdso library
MIPS: Fix boot on Fuloong2 systems
mips: cacheinfo: report shared CPU map
