Impact: remove compile warning
Mark local variable map_end in pcpu_populate_chunk() with
uninitialized_var(). The variable is always used in tandem with
map_start and guaranteed to be initialized before use but gcc doesn't
understand that.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ingo Molnar <mingo@elte.hu>
UP __alloc_percpu() triggered WARN_ON_ONCE() if the requested
alignment is larger than that of unsigned long long, which is too
small for all the cacheline aligned allocations. Bump it up to
SMP_CACHE_BYTES which kmalloc allocations generally guarantee.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ingo Molnar <mingo@elte.hu>
Impact: build fix
the !SMP branch had a 'gfp' leftover:
include/linux/percpu.h: In function '__alloc_percpu':
include/linux/percpu.h:160: error: 'gfp' undeclared (first use in this function)
include/linux/percpu.h:160: error: (Each undeclared identifier is reported only once
include/linux/percpu.h:160: error: for each function it appears in.)
Use GFP_KERNEL like the SMP version does.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: build fix
API was changed, but not all usage sites were converted:
net/ipv4/route.c: In function ‘ip_rt_init’:
net/ipv4/route.c:3379: error: too few arguments to function ‘__alloc_percpu’
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Unused macro parameters cause spurious unused variable warnings.
Convert all cacheflush macros to inline functions to avoid the
warnings and achieve better type checking.
Signed-off-by: Tejun Heo <tj@kernel.org>
Recent changes in setup_percpu.c made a now meaningless DBG()
statement fail to compile and introduced a
comparison-of-different-types warning. Fix them.
Compile failure is reported by Ingo Molnar.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ingo Molnar <mingo@elte.hu>
native_usergs_sysret64 is described as
extern void native_usergs_sysret64(void)
so lets add ENDPROC here
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: heukelum@fastmail.fm
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
NEXT_PAGE already has 'balign' so no
need to keep this redundant one.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: heukelum@fastmail.fm
Signed-off-by: Ingo Molnar <mingo@elte.hu>
While the introduction of __copy_from_user_nocache (see commit:
0812a579c9) may have been an improvement
for sufficiently large writes, there is evidence to show that it is
deterimental for small writes. Unixbench's fstime test gives the
following results for 256 byte writes with MAX_BLOCK of 2000:
2.6.29-rc6 ( 5 samples, each in KB/sec ):
283750, 295200, 294500, 293000, 293300
2.6.29-rc6 + this patch (5 samples, each in KB/sec):
313050, 3106750, 293350, 306300, 307900
2.6.18
395700, 342000, 399100, 366050, 359850
See w_test() in src/fstime.c in unixbench version 4.1.0. Basically, the above test
consists of counting how much we can write in this manner:
alarm(10);
while (!sigalarm) {
for (f_blocks = 0; f_blocks < 2000; ++f_blocks) {
write(f, buf, 256);
}
lseek(f, 0L, 0);
}
Note, there are other components to the write syscall regression
that are not addressed here.
Signed-off-by: Salman Qazi <sqazi@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Most global variables in percpu allocator are initialized during boot
and read only from that point on. Add __read_mostly as per Rusty's
suggestion.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Impact: add better first percpu allocation for NUMA
On NUMA, embedding allocator can't be used as different units can't be
made to fall in the correct NUMA nodes. To use large page mapping,
each unit needs to be remapped. However, percpu areas are usually
much smaller than large page size and unused space hurts a lot as the
number of cpus grow. This allocator remaps large pages for each chunk
but gives back unused part to the bootmem allocator making the large
pages mapped twice.
This adds slightly to the TLB pressure but is much better than using
4k mappings while still being NUMA-friendly.
Ingo suggested that this would be the correct approach for NUMA.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Impact: add better first percpu allocation for !NUMA
On !NUMA, we can simply allocate contiguous memory and use it for the
first chunk without mapping it into vmalloc area. As the memory area
is covered by the large page physical memory mapping, it allows the
dynamic perpcu allocator to not add any TLB overhead for the static
percpu area and whatever falls into the first chunk and the
implementation is very simple too.
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: modularize percpu first chunk allocation
x86 is gonna have a few different strategies for the first chunk
allocation. Modularize it by separating out the current allocation
mechanism into pcpu_alloc_bootmem() and setup_pcpu_4k().
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: more latitude for first percpu chunk allocation
The first percpu chunk serves the kernel static percpu area and may or
may not contain extra room for further dynamic allocation.
Initialization of the first chunk needs to be done before normal
memory allocation service is up, so it has its own init path -
pcpu_setup_static().
It seems archs need more latitude while initializing the first chunk
for example to take advantage of large page mapping. This patch makes
the following changes to allow this.
* Define PERCPU_DYNAMIC_RESERVE to give arch hint about how much space
to reserve in the first chunk for further dynamic allocation.
* Rename pcpu_setup_static() to pcpu_setup_first_chunk().
* Make pcpu_setup_first_chunk() much more flexible by fetching page
pointer by callback and adding optional @unit_size, @free_size and
@base_addr arguments which allow archs to selectively part of chunk
initialization to their likings.
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: allow unit_size to be arbitrary multiple of PAGE_SIZE
In dynamic percpu allocator, there is no reason the unit size should
be power of two. Remove the restriction.
As non-power-of-two unit size means that empty chunks fall into the
same slot index as lightly occupied chunks which is bad for reclaming.
Reserve an extra slot for empty chunks.
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: minor change to populate_extra_pte() and addition of pmd flavor
Update populate_extra_pte() to return pointer to the pte_t for the
specified address and add populate_extra_pmd() which only populates
till the pmd and returns pointer to the pmd entry for the address.
For 64bit, pud/pmd/pte fill functions are separated out from
set_pte_vaddr[_pud]() and used for set_pte_vaddr[_pud]() and
populate_extra_{pte|pmd}().
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: allow larger alignment for early vmalloc area allocation
Some early vmalloc users might want larger alignment, for example, for
custom large page mapping. Add @align to vm_area_register_early().
While at it, drop docbook comment on non-existent @size.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Impact: cleanup and addition of missing interface wrapper
The interface functions in bootmem.h was ordered in not so orderly
manner. Reorder them such that
* functions allocating the same area group together -
ie. alloc_bootmem group and alloc_bootmem_low group.
* functions w/o node parameter come before the ones w/ node parameter.
* nopanic variants are immediately below their panicky counterparts.
While at it, add alloc_bootmem_pages_node_nopanic() which was missing.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@saeurebad.de>
Impact: cleaner and consistent bootmem wrapping
By setting CONFIG_HAVE_ARCH_BOOTMEM_NODE, archs can define
arch-specific wrappers for bootmem allocation. However, this is done
a bit strangely in that only the high level convenience macros can be
changed while lower level, but still exported, interface functions
can't be wrapped. This not only is messy but also leads to strange
situation where alloc_bootmem() does what the arch wants it to do but
the equivalent __alloc_bootmem() call doesn't although they should be
able to be used interchangeably.
This patch updates bootmem such that archs can override / wrap the
backend function - alloc_bootmem_core() instead of the highlevel
interface functions to allow simpler and consistent wrapping. Also,
HAVE_ARCH_BOOTMEM_NODE is renamed to HAVE_ARCH_BOOTMEM.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@saeurebad.de>
Impact: fix short allocation leading to memory corruption
While dropping rvalue wrapping macros around global parameters,
pcpu_chunk_struct_size was set incorrectly resulting in shorter page
pointer array. Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: Documentation fix
The amazing dancing boot.txt file has jumped places again. It should
never have been in Documentation/x86/i386, since it never was
32-bit-specific, but it unfortunately ended up there for a while.
Signed-off-by: Kyle McMartin <kyle@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Impact: Cleanup
Checkin be44d2aabc eliminates the use of
a 16-bit stack for espfix. However, at least one instruction remained
that only operated on the low 16 bits of %esp.
This is not a bug per se because the kernel stack is always an aligned
4K or 8K block. Therefore it cannot cross 64K boundaries; this code,
in fact, relies strictly on that fact.
However, it's a lot cleaner (and, for that matter, smaller) to operate
on the entire 32-bit register.
Signed-off-by: Stas Sergeev <stsp@aknet.ru>
CC: Zachary Amsden <zach@vmware.com>
CC: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Impact: fix early crash on LinuxBIOS systems
Kevin O'Connor reported that Coreboot aka LinuxBIOS tries to put
mptable somewhere very high, well above max_low_pfn (below which
BIOSes generally put the mptable), causing a panic.
The BIOS will probably be changed to be compatible with older
Linus versions, but nevertheless the MP-spec does not forbid
an MP-table in arbitrary system RAM, so make sure it all
works even if the table is in an unexpected place.
Check physptr with max_low_pfn * PAGE_SIZE.
Reported-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Stefan Reinauer <stepan@coresystems.de>
Cc: coreboot@coreboot.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add missing parameter value to list of available values
for acpi=<value>.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/i915: Add missing mutex_lock(&dev->struct_mutex)
drm/i915: fix WC mapping in non-GEM i915 code.
drm/i915: Fix regression in 95ca9d
drm/i915: Retire requests from i915_gem_busy_ioctl.
drm/i915: suspend/resume GEM when KMS is active
drm/i915: Don't let a device flush to prepare buffers clear new write_domains.
drm/i915: Cut two args to set_to_gpu_domain that confused this tricky path.
there might be a nicer way to fix this but this is the simplest for now.
Signed-off-by: Pierre Willenbrock <pierre@pirsoft.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The object is dereferenced before the NULL check. Oops.
Fixes http://bugs.freedesktop.org/show_bug.cgi?id=20235
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This ensures that the user gets the latest information from the hardware
on whether the buffer is busy, potentially reducing the working set of objects
that the user chooses.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In the KMS case, we need to suspend/resume GEM as well. So on suspend, make
sure we idle GEM and stop any new rendering from coming in, and on resume,
re-init the framebuffer and clear the suspended flag.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The problem was that object_set_to_gpu_domain would set the new write_domains
that are getting set by this batchbuffer, then the accumulated flushes required
for all the objects in preparation for this batchbuffer were posted, and the
brand new write domain would get cleared by the flush being posted. Instead,
hang on to the new (or old if we're not changing it) value and set it after
the flush is queued.
Results from this noticably included conformance test failures from reads
shortly after writes (where the new write domain had been lost and thus not
flushed and waited on), but is a suspected cause of hangs in some apps when
a write domain is lost on a buffer that gets reused for instruction or
commmand state.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
While not strictly required, it helped while thinking about the following
change. This change should be invariant.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
early_acpi_os_unmap_memory() is an __init function, and
acpi_os_unmap_memory() is allowed to access an __init function
until acpi_gbl_permanent_mmap is set up.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Make x86_quirks support more transparent. The highlevel
methods are now named:
extern void x86_quirk_pre_intr_init(void);
extern void x86_quirk_intr_init(void);
extern void x86_quirk_trap_init(void);
extern void x86_quirk_pre_time_init(void);
extern void x86_quirk_time_init(void);
This makes it clear that if some platform extension has to
do something here that it is considered ... weird, and is
discouraged.
Also remove arch_hooks.h and move it into setup.h (and other
header files where appropriate).
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: remove dead code
Remove:
- pre_setup_arch_hook()
- mca_nmi_hook()
If needed they can be added back via an x86_quirk handler.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: remove unused/broken code
The Voyager subarch last built successfully on the v2.6.26 kernel
and has been stale since then and does not build on the v2.6.27,
v2.6.28 and v2.6.29-rc5 kernels.
No actual users beyond the maintainer reported this breakage.
Patches were sent and most of the fixes were accepted but the
discussion around how to do a few remaining issues cleanly
fizzled out with no resolution and the code remained broken.
In the v2.6.30 x86 tree development cycle 32-bit subarch support
has been reworked and removed - and the Voyager code, beyond the
build problems already known, needs serious and significant
changes and probably a rewrite to support it.
CONFIG_X86_VOYAGER has been marked BROKEN then. The maintainer has
been notified but no patches have been sent so far to fix it.
While all other subarchs have been converted to the new scheme,
voyager is still broken. We'd prefer to receive patches which
clean up the current situation in a constructive way, but even in
case of removal there is no obstacle to add that support back
after the issues have been sorted out in a mutually acceptable
fashion.
So remove this inactive code for now.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
At some point we (okay, I) managed to break the ability for users to use the
setsockopt() syscall to set IPv4 options when NetLabel was not active on the
socket in question. The problem was noticed by someone trying to use the
"-R" (record route) option of ping:
# ping -R 10.0.0.1
ping: record route: No message of desired type
The solution is relatively simple, we catch the unlabeled socket case and
clear the error code, allowing the operation to succeed. Please note that we
still deny users the ability to override IPv4 options on socket's which have
NetLabel labeling active; this is done to ensure the labeling remains intact.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
The CIPSO protocol engine incorrectly stated that the FIPS-188 specification
could be found in the kernel's Documentation directory. This patch corrects
that by removing the comment and directing users to the FIPS-188 documented
hosted online. For the sake of completeness I've also included a link to the
CIPSO draft specification on the NetLabel website.
Thanks to Randy Dunlap for spotting the error and letting me know.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
* 'core/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
PM: Split up sysdev_[suspend|resume] from device_power_[down|up], fix
Impact: module build fix
Fix:
ERROR: "sysdev_resume" [arch/x86/kernel/apm.ko] undefined!
ERROR: "sysdev_suspend" [arch/x86/kernel/apm.ko] undefined!
As these APIs are now used by the APM driver, which can be built
as a module.
Also fix a few extra (and inconsistent) newlines in comment blocks
preceding these functions.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The kernel-api docbook was much larger than any of the others,
so processing it took longer and needed some docbook extras in
some cases, so split it into kernel-api (infrastructure etc.)
and device drivers/device subsystems. This allows these docbooks
to be generated in parallel. (This reduced the docbook processing
time on my 4-proc system with make -j4 from about 5min:16sec to
about 2min:01sec.)
The chapters that were moved from kernel-api to device-drivers are:
Driver Basics
Device drivers infrastructure
Parallel Port Devices
Message-based devices
Sound Devices
16x50 UART Driver
Frame Buffer Library
Input Subsystem
Serial Peripheral Interface (SPI)
I2C and SMBus Subsystem
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
