Pull ARM SoC platform updates from Olof Johansson:
"SoC changes, a substantial part of this is cleanup of some of the
older platforms that used to have a bunch of board files.
In particular:
- Remove non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP
platforms, moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
There are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones are:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
ARM: mstar: Select MStar intc
ARM: stm32: Replace HTTP links with HTTPS ones
ARM: debug: add UART early console support for SD5203
ARM: hisi: add support for SD5203 SoC
ARM: omap3: enable off mode automatically
clk: imx: imx35: Remove mx35_clocks_init()
clk: imx: imx31: Remove mx31_clocks_init()
clk: imx: imx27: Remove mx27_clocks_init()
ARM: imx: Remove unused definitions
ARM: imx35: Retrieve the IIM base address from devicetree
ARM: imx3: Retrieve the AVIC base address from devicetree
ARM: imx3: Retrieve the CCM base address from devicetree
ARM: imx31: Retrieve the IIM base address from devicetree
ARM: imx27: Retrieve the CCM base address from devicetree
ARM: imx27: Retrieve the SYSCTRL base address from devicetree
ARM: s3c64xx: bring back notes from removed debug-macro.S
ARM: s3c24xx: fix Wunused-variable warning on !MMU
ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
MAINTAINERS: mark linux-samsung-soc list non-moderated
ARM: imx: Remove remnant board file support pieces
...
Pull clk updates from Stephen Boyd:
"This contains no changes to the core framework. It is a collection of
various clk driver updates.
The biggest driver updates in terms of lines of code is the Allwinner
driver, closely followed by the Qualcomm and Mediatek drivers. All of
those hit high because we add so many lines of clk data. Coming in
fourth place is i.MX which also adds a bunch of clk data. This
accounts for the new driver additions this time around.
Otherwise the patches are lots of little cleanups and fixes for
various clk drivers that have baked in linux-next for a while. I
suppose one highlight or theme is that more clk drivers are being
updated to work as modules, which is interesting to see such critical
SoC infrastructure work as a loadable module.
New Drivers:
- Support qcom SM8150/SM8250 video and display clks
- Support Mediatek MT8167 clks
- Add clock for CRC block found on vf610 SoCs
- Add support for the Renesas R-Car V3U (R8A779A0) SoC
- Add support for the VSP for Resizing clock on Renesas RZ/G1H
- Support Allwinner A100 SoC clks
Removed Drivers:
- Remove i.MX21 clock driver, as i.MX21 platform support is being
dropped
Updates:
- Change how qcom's display port clks work
- Small non-critical fixes for TI clk driver
- Remove various unused variables in clk drivers
- Allow Rockchip clk driver to be a module
- Remove most __clk_lookup() calls in Samsung drivers (yay!)
- Support building i.MX ARMv8 platforms clock driver as module
- Some kerneldoc fixes here and there
- A couple of minor i.MX clk data corrections
- Update audio clock inverter and fdiv2 flag on Amlogic g12
- Make amlogic clk drivers configurable in Kconfig
- Fix Renesas VSP clock names to match corrected hardware
documentation
- Sigma-delta modulation on Allwinner R40
- Various fixes for at91 clk driver
- Use semicolons instead of commas in some places
- Mark some variables const so they can move to RO memory"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (102 commits)
clk: imx8mq: Fix usdhc parents order
clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on
clk: Restrict CLK_HSDK to ARC_SOC_HSDK
clk: at91: sam9x60: support only two programmable clocks
clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate
clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT
clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL
clk: ingenic: Use readl_poll_timeout instead of custom loop
clk: ingenic: Use to_clk_info() macro for all clocks
clk: bcm2835: add missing release if devm_clk_hw_register fails
clk: at91: clk-sam9x60-pll: remove unused variable
clk: at91: clk-main: update key before writing AT91_CKGR_MOR
clk: at91: remove the checking of parent_name
clk: clk-prima2: fix return value check in prima2_clk_init()
clk: mmp2: Fix the display clock divider base
clk: pxa: Constify static struct clk_ops
clk: baikal-t1: Mark Ethernet PLL as critical
clk: qoriq: modify MAX_PLL_DIV to 32
clk: axi-clkgen: Set power bits for fractional mode
clk: axi-clkgen: Add support for fractional dividers
...
Pull USB/PHY/Thunderbolt driver updates from Greg KH:
"Here is the big set of USB, PHY, and Thunderbolt driver updates for
5.10-rc1.
Lots of tiny different things for these subsystems are in here,
including:
- phy driver updates
- thunderbolt / USB 4 updates and additions
- USB gadget driver updates
- xhci fixes and updates
- typec driver additions and updates
- api conversions to various drivers for core kernel api changes
- new USB control message functions to make it harder to get wrong,
as found by syzbot (took 2 tries to get it right)
- lots of tiny USB driver fixes and updates all over the place
All of these have been in linux-next for a while, with the exception
of the last "obviously correct" patch that updated a FALLTHROUGH
comment that got merged last weekend"
* tag 'usb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (374 commits)
usb: musb: gadget: Use fallthrough pseudo-keyword
usb: typec: Add QCOM PMIC typec detection driver
USB: serial: option: add Cellient MPL200 card
usb: typec: tcpci_maxim: Add support for Sink FRS
usb: typec: tcpci: Implement callbacks for FRS
usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)
usb: typec: tcpci_maxim: Chip level TCPC driver
usb: typec: tcpci: Add set_vbus tcpci callback
usb: typec: tcpci: Add a getter method to retrieve tcpm_port reference
usbip: vhci_hcd: fix calling usb_hcd_giveback_urb() with irqs enabled
usb: cdc-acm: add quirk to blacklist ETAS ES58X devices
USB: serial: ftdi_sio: use cur_altsetting for consistency
USB: serial: option: Add Telit FT980-KS composition
USB: core: remove polling for /sys/kernel/debug/usb/devices
usb: typec: add support for STUSB160x Type-C controller family
usb: typec: add typec_find_pwr_opmode
usb: typec: hd3ss3220: Use OF graph API to get the connector fwnode
dt-bindings: usb: renesas,usb3-peri: Document HS and SS data bus
dt-bindings: usb: convert ti,hd3ss3220 bindings to json-schema
usb: dwc2: Fix INTR OUT transfers in DDMA mode.
...
This doesn't yet do anything in the tools, but make it explicit so we can
check either 'unevaluatedProperties' or 'additionalProperties' is present
in schemas.
'unevaluatedProperties' is appropriate when including another schema (via
'$ref') and all possible properties and/or child nodes are not
explicitly listed in the schema with the '$ref'.
This is in preparation to add a meta-schema to check for missing
'unevaluatedProperties' or 'additionalProperties'. This has been a
constant source of review issues.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20201005183830.486085-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Visconti5 SoC changes for v5.10 (take two)
- Add dt-bindings for Toshiba Visconti ARM SoCs
- Add dt-bindings for the TMPV7708 RM main board
- Add initial support for Toshiba Visconti platform
- Add device tree for TMPV7708 RM main board
- Add information for Toshiba Visconti ARM SoCs to MAINTAINERS
- Enable configs for Toshiba Visconti to arm64's defconfig
* tag 'visconti-initial-for-5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti:
arm64: defconfig: Enable configs for Toshiba Visconti
MAINTAINERS: Add information for Toshiba Visconti ARM SoCs
arm64: dts: visconti: Add device tree for TMPV7708 RM main board
arm64: visconti: Add initial support for Toshiba Visconti platform
dt-bindings: arm: toshiba: Add the TMPV7708 RM main board
dt-bindings: arm: toshiba: add Toshiba Visconti ARM SoCs
Link: https://lore.kernel.org/r/20200923085236.4hu53gmnnmqkttuy@toshiba.co.jp
Signed-off-by: Olof Johansson <olof@lixom.net>
A few more DT patches for 5.10, to support simple-framebuffer on the v3s
and the pinecube board
* tag 'sunxi-dt-for-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: v3s: Add simple-framebuffer
ARM: dts: sun8i: s3l: add support for Pine64 PineCube IP camera
dt-bindings: arm: sunxi: add Pine64 PineCube binding
ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for I2C1 at PE bank
ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for 8-bit parallel CSI
ARM: dts: sun8i: V3/V3s/S3/S3L: add CSI1 device node
ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for UART2 RX/TX
ARM: dts: sun8i: V3/V3s/S3/S3L: add Ethernet support
Link: https://lore.kernel.org/r/e7c12b59-8603-438d-908b-5f0bde2c8697.lettre@localhost
Signed-off-by: Olof Johansson <olof@lixom.net>
Actions Semi bindings for v5.10
- Add vendor prefix for Roseapple Pi: http://roseapplepi.org/
- Document RoseapplePi SBC manufactured by Roseapple Pi team in Taiwan.
This board is based on Actions Semi S500 SoC. More information about
this board can be found in their website:
http://roseapplepi.org/index.php/spec/
- Add vendor prefix for Caninos Loucos Program:
https://caninosloucos.org/en/program-en/
- Document Caninos Loucos Labrador SBC manufactured by Laboratory of
Integrated Technological Systems (LSI-TEC), Brazil. This board is based
on Actions Semi S500 SoC. More information about this board can be found
in their website: https://caninosloucos.org/en/labrador-32-en/
* tag 'actions-bindings-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions:
dt-bindings: arm: actions: Document RoseapplePi
dt-bindings: Add vendor prefix for RoseapplePi.org
dt-bindings: arm: actions: Document Caninos Loucos Labrador
dt-bindings: Add vendor prefix for Caninos Loucos
Link: https://lore.kernel.org/r/20200922113408.GA11251@Mani-XPS-13-9360
Signed-off-by: Olof Johansson <olof@lixom.net>
Convert the Hisilicon Bootwrapper boot method binding to DT schema format
using json-schema.
The property boot-method contains two groups of physical address range
information: bootwrapper and relocation. The "uint32-array" type is not
suitable for it, because the field "address" and "size" may occupy one or
two cells respectively. Use "minItems: 1" and "maxItems: 2" to allow it
can be written in "<addr size addr size>" or "<addr size>, <addr size>"
format.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20200929141454.2312-15-thunder.leizhen@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
The Samsung Exynos System Registers (Sysreg) bindings are quite simple -
just additional compatible to the syscon. They do not have any value so
merge them into generic MFD syscon bindings.
Suggested-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The current binding for the RPi firmware uses the simple-bus compatible as
a fallback to benefit from its automatic probing of child nodes.
However, simple-bus also comes with some constraints, like having the ranges,
our case.
Let's switch to simple-mfd that provides the same probing logic without
those constraints.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200924082642.18144-1-maxime@cerno.tech
Signed-off-by: Rob Herring <robh@kernel.org>
arm64: dtc: amlogic updates for v5.10
- new boards: libretch s905x cc v2, Hardkernel ODROID-N2+
- vim3: sound updates
* tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson: initial support for aml-s905x-cc v2
dt-bindings: arm: amlogic: add support for libretch s905x cc v2
arm64: dts: meson: add support for the ODROID-N2+
dt-bindings: arm: amlogic: add support for the ODROID-N2+
arm64: dts: meson: convert ODROID-N2 to dtsi
arm64: dts: meson: vim3l: remove sound card definition
arm64: dts: meson: vim3: make sound card common to all variants
arm64: dts: meson: vim3: correct led polarity
Link: https://lore.kernel.org/r/7h3636kjxd.fsf@baylibre.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Qualcomm ARM64 DT updates for v5.10
Cleanup, refactor and modernize MSM8916 by sorting nodes, moving device
and platform specific parts to their respective files, add and use
labels for reference nodes and use IRQ defines. Migrate TCSR mutex off
the depricated binding, add resin node for PM8916.
Add LPASS clock controller for SC7180. Fix the LLCC reg, increase
interconnect-cells, drop flags on MDSS irqs. Add interconnects for
display, eMMC and SD-card, specify 'sustainable_power' for CPU thermal
zones, improve pinconf states related to UART and Bluetooth. Add new DT
for Lazor and Trogdor.
Increase #interconnect-cells for SDM845 to allow tags, add OPP tables
and power-domains for Venus and interconnects for display. Fix the ports
on the HDMI nodes for DB845c and add DT for the Xiaomi Poco F1.
Add interconnect providers, fix up primary USB's clock and use
dt-binding defines for GPU clocks on SM8150.
Add interconnect providers, CPUfreq, thermal configuration and missing
uarts for SM8250. Fix up naming of debug uart, add always-on supply
clock to gcc, fix up the sleep clock rate and define OPP tables for all
QUP devices. Then add a new DeviceTree for the QRB5165 RB5 board.
Enable watchdog on IPQ8074 and use the appropriate compatible for the
PMU node. Enable DVFS support for IPQ6018.
Finally correct the spelling of "interrupts" in MSM8992 uart node, fix
missing # in PM660 #interrupt-cells, add second VFE power-domain to
camss in MSM8996 and sort the Makefile.
* tag 'qcom-arm64-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (75 commits)
arm64: dts: qcom: sm8250: Add thermal zones and throttling support
arm64: dts: qcom: sm8250: Add cpufreq hw node
arm64: dts: qcom: sdm845: Add interconnects property for display
arm64: dts: qcom: sm8250: Add EPSS L3 interconnect provider
arm64: dts: qcom: sm8150: Add OSM L3 interconnect provider
arm64: dts: qcom: sm8250: add interconnect nodes
arm64: dts: qcom: sm8150: add interconnect nodes
arm64: dts: qcom: sc7180: Increase the number of interconnect cells
arm64: dts: qcom: sdm845: Increase the number of interconnect cells
arm64: dts: qcom: Makefile: Sort lines
arm64: dts: qcom: pm8916: Sort nodes
arm64: dts: qcom: msm8916: Sort nodes
arm64: dts: qcom: msm8916: Pad addresses
arm64: dts: qcom: msm8916: Rename "x-smp2p" to "smp2p-x"
arm64: dts: qcom: msm8916: Use more generic node names
arm64: dts: qcom: msm8916: Add MSM8916-specific compatibles to SCM/MSS
arm64: dts: qcom: msm8916: Minor style fixes
arm64: dts: qcom: msm8916: Drop qcom,tcsr-mutex syscon
arm64: dts: qcom: msm8916: Use IRQ defines, add IRQ types
arm64: dts: qcom: msm8916: Fix MDP/DSI interrupts
...
Link: https://lore.kernel.org/r/20200924040607.180039-1-bjorn.andersson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
New boards NanoPi R2S, A95X-Z2 and more Rock-Pi4 variants.
Khadas-edge additions and a some fixes.
* tag 'v5.10-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: add ir-receiver node to rk3399-khadas-edge
arm64: dts: rockchip: add spiflash node to rk3399-khadas-edge
arm64: dts: rockchip: Add support for FriendlyARM NanoPi R2S
dt-bindings: Add doc for FriendlyARM NanoPi R2S
arm64: dts: rockchip: replace status value "ok" by "okay"
arm64: dts: rockchip: fix cpu-supply for rk3328-evb
arm64: dts: rockchip: add rk3318 A95X Z2 board
dt-bindings: arm: rockchip: add Zkmagic A95X Z2 description
dt-bindings: Add vendor prefix for Shenzhen Zkmagic Technology Co., Ltd.
arm64: dts: rockchip: Add Radxa ROCK Pi 4C support
arm64: dts: rockchip: Add Radxa ROCK Pi 4B support
arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts
dt-bindings: arm: rockchip: Update ROCKPi 4 binding
arm64: dts: rockchip: change spdif fallback compatible on rk3308
arm64: dts: rockchip: Fix power routing to support POE on rk3399-roc-pc
Link: https://lore.kernel.org/r/16010805.MhVyP8KKtY@diego
Signed-off-by: Olof Johansson <olof@lixom.net>
Samsung DTS ARM changes for v5.10, part two
1. Further cleanup of DTS with dtschema: s5pv210, s3c6410 and s3c24xx.
This fixes many minor dtschema violations, adds few missing
functionalities (like clock for RTC) and improves the code
maintainability in few places. Except the RTC clock, this should not
have visible impact.
2. Fix few remaining Exynos dtschema violations.
* tag 'samsung-dt-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (36 commits)
ARM: dts: s5pv210: replace deprecated "gpios" i2c-gpio property in Goni
ARM: dts: s5pv210: replace deprecated "gpios" i2c-gpio property in Aquila
ARM: dts: s5pv210: move fixed regulators under root node in Goni
ARM: dts: s5pv210: move fixed regulators under root node in Aquila
ARM: dts: exynos: Align OPP table name with dt-schema
ARM: dts: exynos: move assigned-clock* properties to i2s0 node in Odroid XU4
ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid
ARM: dts: exynos: add input clock to CMU in Exynos3250
ARM: dts: s3c24xx: move fixed clocks under root node in SMDK2416
ARM: dts: s3c24xx: add address to CPU node
ARM: dts: s3c24xx: align PWM/timer node name with dtschema
ARM: dts: s3c24xx: override nodes by label
ARM: dts: s3c24xx: fix number of PWM cells
ARM: dts: s3c6410: remove additional CPU compatible
ARM: dts: s3c6410: align node SROM bus node name with dtschema in SMDK6410
ARM: dts: s3c6410: align node SROM bus node name with dtschema in Mini6410
ARM: dts: s3c6410: move fixed clocks under root node in SMDK6410
ARM: dts: s3c6410: move fixed clocks under root node in Mini6410
ARM: dts: s5pv210: correct ethernet unit address in SMDKV210
ARM: dts: s5pv210: align SPI GPIO node name with dtschema in Aries
...
Link: https://lore.kernel.org/r/20200920160705.9651-3-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
The J7200 SoC is a part of the K3 Multicore SoC architecture platform.
It is targeted for automotive gateway, vehicle compute systems,
Vehicle-to-Vehicle (V2V) and Vehicle-to-Everything (V2X) applications.
The SoC aims to meet the complex processing needs of modern embedded
products.
Some highlights of this SoC are:
* Dual Cortex-A72s in a single cluster, two clusters of lockstep
capable dual Cortex-R5F MCUs and a Centralized Device Management and
Security Controller (DMSC).
* Configurable L3 Cache and IO-coherent architecture with high data
throughput capable distributed DMA architecture under NAVSS.
* Integrated Ethernet switch supporting up to a total of 4 external ports
in addition to legacy Ethernet switch of up to 2 ports.
* Upto 1 PCIe-GEN3 controller, 1 USB3.0 Dual-role device subsystems,
20 MCANs, 3 McASP, eMMC and SD, OSPI/HyperBus memory controller, I3C and
I2C, eCAP/eQEP, eHRPWM among other peripherals.
* One hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL
management.
See J7200 Technical Reference Manual (SPRUIU1, June 2020)
for further details: https://www.ti.com/lit/pdf/spruiu1
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20200914162231.2535-4-lokeshvutla@ti.com
