Actually jsm displays "Device Added" 8 times (for a 8 port device).
This silly patch just makes things more informative, showing
the port (instead of the device) that was added.
Signed-off-by: Breno Leitão <leitao@linux.vnet.ibm.com>
Cc: Scott Kilau <scottk@digi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Currently jsm is showing the following message when loaded:
IRQ 432/JSM: IRQF_DISABLED is not guaranteed on shared IRQs
It's because the request_irq() is called using IRQF_DISABLED
and IRQF_SHARED.
Actually there is no need to use IRQF_DISABLED in this driver.
Signed-off-by: Breno Leitão <leitao@linux.vnet.ibm.com>
Cc: Scott Kilau <scottk@digi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Barry Song <21cnbao@gmail.com>
Signed-off-by: H.J. Oertel <oe@port.de>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 4b77b0a2ba ("PCI: Clear
saved_state after the state has been restored"), the EEH is not
working proplery on cxgb3.
This patch fixes it, always saving the PCI state after a recovery,
in order to allow further reoveries.
Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To prevent stale indices from causing spurious events when restarting the
bnx2x devices.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This step is necessary on the bnx2x devices when restarting the iSCSI
ring. Without it, the firmware can assert and cause bnx2x to report
errors.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
smc_drv_resume() takes a struct device, while smc_enable_device() takes a
platform device. This fixes up the smc_enable_device() callsite with the
proper pointer.
It's not obvious when this change was introduced, as git history doesn't
go back that far. Presumably the resume code has always been broken in
this fashion.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Local flags variables will be declared whenever these functions get used,
but obviously on UP systems the flags parameter won't be touched. So add
some dummy ops that get optimized away anyways to satisfy gcc's warnings.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add missing TST_CFG_WRITE bits around sky2_pci_write*() in Optima
setup routines. Without the cfg-write bits, the driver may spew endless
link-up messages through qlink irq.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the TCP offload setup for Yukon-2 Optima.
It requires SKY2_HW_NE_LE flag unlike Ultra 2.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/ttm: export some functions useful to drivers using ttm
drm/radeon/kms/avivo: fix typo in new_pll module description
drm/radeon/kms: Convert radeon to new ttm_bo_init
drm/ttm: Convert ttm_buffer_object_init to use ttm_placement
Queueing to receive an ISO packet with a payload length of zero
silently does nothing in dualbuffer mode, and crashes the kernel in
packet-per-buffer mode. Return an error in dualbuffer mode, because
the DMA controller won't let us do what we want, and work correctly in
packet-per-buffer mode.
Signed-off-by: Jay Fenlason <fenlason@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: stable@kernel.org
Here I've kept the selection of IIO_SW_RING separate from
IIO_TRIGGER as it will go away fairly shortly when the ring buffer
type becomes configurable on a per device basis, whereas the
IIO_TRIGGER select will remain. Whether to retain the option to
remove the support for ring buffers entirely is one for after that
support is in place.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Minimal changes to driver. Just adds the device to the id
table and adjusts the Kconfig elements appropriately.
Adding further similar chips from TAOS is complicated by their
different conversion functions (and hence left for now).
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Amit Kucheria <amit.kucheria@verdurent.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Adjusts the signal levels reported by the wlags49_h2 and wlags49_h25 staging
drivers. With the constants supplied by Agere the signal levels are always
poor, even in close proximity to the AP. The signals are now measured with
a real device. 100% for close proximity to the AP, 0% for the noice floor.
Now the levels shown by the NetworkManager gauge make sense.
Some magic numbers in the related code are replaced by the correct constants
from the wireless extension interface (wireless.h). Also the flag IW_QUAL_DBM
is now set, as specified in the wireless.h header file.
Signed-off-by: Henk de Groot <pe1dnn@amsat.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Henk de Groot <pe1dnn@amsat.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a drive for the Samsung N128 laptop to control the wireless LED
and backlight.
Many thanks to Joey Lee for his help in testing and finding all of my
bugs in the development of this driver, it has been invaluable.
Cc: Joey Lee <jlee@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is
a routing protocol for multi-hop ad-hoc mesh networks. The
networks may be wired or wireless. See
http://www.open-mesh.org/ for more information and user space
tools.
This is the first submission for inclusion in staging.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add it to staging Kbuild and fixes some API differences that prevents
compilation.
It seems that the ieee80211 stack is very close to rtl8192su one.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add Realtek linux driver for rtl8192u as provided by Realtek
rtl8192u_linux_2.6.0006.1031.2008.tar.gz, send to me C/C staging ML.
This version won't compile against upstream, doesn't follow
Linux CodingStyle and has their own ieee80211 stack.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds generic_gpio and pmem support, both are needed for other
dream drivers.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds TODO list. It is probably incomplete, as many parts were not
reviewed by the upstream maintainers, yet.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These drivers are no longer being developed and the original authors
seem to have abandonded them and hence, do not want them in the mainline
kernel tree.
So sad :(
Cc: Brian Swetland <swetland@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These have a wrap bit but again need little work to clean out. There are a
couple of uglies left that want addressing in later clean up. Notably we should
probably keep the local psr copy and wrap as two values.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Lots of RX typedefs are just low bits of a u32, so clean them all up in one
go and just work them directly.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Yes folks it another unused typedef.. This completes the clean up of the
TX DMA typedefs
Signed-off-by: Alan Cox <alan@linux.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that active development has begun on a mainline version of
a driver for the RTL8187SE that should be called rtl8187se, there
is a conflict with the driver in staging with the same name.
To solve the conflict, rename the driver in staging to r8187se.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The vendor-written driver for the RTL8187SE has a private variable
for the card type, even though it only occurs in PCI format.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When this code is used for the rtl8187se, the value of card_8185
in struct r8180_priv is always 7 or 8. As a result, the program
flow can be simplified.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Bernhard Schiffner <bernhard@schiffner-limbach.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This removes superfluous exclamation marks from strings and comments, and
also three spelling typos.
Signed-off-by: Sebastian Dalfuß <sd@sedf.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add driver support for the tsl2563 TAOS ambient light sensor. After looking at
discussions on LKML, the driver was modified from a 'hwmon' driver to an 'iio'
driver. The sysfs interfaces have been tested on an RX51 (N900) to see if it
responds to changing light conditions.
The only real reason for submitting this to staging is that it is dependent on
the IIO subsystem.
Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix printk format warning:
drivers/staging/sep/sep_driver.c:276: warning: format '%08llx' expects type 'long long unsigned int', but argument 2 has type 'dma_addr_t'
and variable may be used uninitialized (correct):
drivers/staging/sep/sep_driver.c:1774: warning: 'error' may be used uninitialized in this function
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix printk format warnings in vt665[56]:
drivers/staging/vt6655/wpa.c:150: warning: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int'
drivers/staging/vt6655/wpa.c:181: warning: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int'
drivers/staging/vt6656/wpa.c:150: warning: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int'
drivers/staging/vt6656/wpa.c:181: warning: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int'
drivers/staging/vt6656/firmware.c:804: warning: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
max1363 uses both the iio hardware ring buffer and software
ring buffer interfaces, but its Makefile and Kconfig do not
reflect that usage, so its build breaks. Add a new Kconfig
symbol to reflect that usage and change max1363.h & Makefile
to use the new Kconfig symbol.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
`|' has a higher precedence than `?' so since MSG_WAITALL is
defined 0x100, MSG_MORE was always written to the msg_flag.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The DMA resource allocation function is called "vme_request_dma" while
master and slave window allocation functions are called
"vme_master_request" and "vme_slave_request" respectively. Rename
"vme_request_dma" to "vme_dma_request" to fit the pattern.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The vme_lm_free() function is not clearing up the resource created in
vme_lm_request(). In addition vme_lm_free() is void function and is used in
exit/error paths, we should wait for mutex to become free rather than
exiting and not freeing the resource.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The TSI148 driver currently does not allow a size of zero to be passed to a
window. Zero is a valid value if the window is being disabled. Allow
windows to be disabled and their registers cleared.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It's causing people to ignore problems in the file, so get rid
of them so it's obvious something is wrong in the future.
Cc: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Currently the VME callback infrastructure is replicated in each VME driver.
Move this common code into the VME core. Rename functions to fit in better
with naming of other VME functions.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eric Sesterhenn noticed that vme_user is overflowing an array used by
sprintf. Use a bigger array.
CC: Eric Sesterhenn <eric.sesterhenn@lsexperts.de>
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The vt6656 driver is integrated in the kernel so it no longer needs the
compatibility header.
Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The vt6655 driver is integrated in the kernel so it no longer needs the
compatibility header.
Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
uNodeIndex is unsigned, check whether it is within bounds instead.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch is based on next-20091106.
This tiny patch removes a few quite unnecessary extra newlines from
DBGPRINT() and printk() strings.
Signed-off-by: Sebastian Dalfuß <sd@sedf.de>
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The stuff that tries to read a file from /etc is already removed, so
this patch just removes the last remainders.
Signed-off-by: Sebastian Dalfuß <sd@sedf.de>
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
After the incorporation of the patch entitled "wext: refactor", some
of the wireless drivers in drivers/staging fail to build because they
need to have CONFIG_WIRELESS_EXT and CONFIG_WEXT_PRIV defined.
[ patch description borrowed from the previous fix for wireless staging
drivers ("staging: Add proper selection of WIRELESS_EXT and WEXT_PRIV")
authored by Larry Finger ]
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Second lot of checkpatch.pl error and warning fixes for .c files of
otus driver in staging tree.
(Externs would be removed in a seperate patch)
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
First patch for checkpatch.pl error and warning fixes for .c files of otus
driver in staging tree.
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix for checkpatch.pl errors and warnings in header files of otus driver.
(There is a typedef which still remains. Plan to clean it up in next set
of patches)
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
wakelocks are power optimalization, not supported in mainline. Remove
them so that code compiles on mainline.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Includes changed so that <linux/sched.h> is now needed for
TASK_INTERRUPTIBLE and friends, so include it.
Remove hooks for features not in mainline, such as earlysuspend and
wakelocks.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Check that SMBUS APIs are available in touchscreen driver.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Cc: Trilok Soni <soni.trilok@gmail.com>
Cc: <arve@android.com>
Cc: Brian Swetland <swetland@google.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It doesn't build, and hasn't for a long time (if ever). So mark
it BROKEN for now.
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Adds TODO to the wlags_h2 and wlags_h5 staging drivers.
Signed-off-by: Henk de Groot <pe1dnn@amsat.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WLAN driver for cards using the HERMES II and HERMES II.5 chipset
Based on Agere Systems Linux LKM Wireless Driver Source Code,
Version 7.22; complies with Open Source BSD License.
The software is a modified version of wl_lkm_722_abg.tar.gz from the
Agere Systems website, addapted for Ubuntu 9.04 and modified to
fit in the current Linux kernel (2.6.31).
Modified for kernel 2.6 by Henk de Groot <pe1dnn@amsat.org>
Based on 7.18 version by Andrey Borzenkov <arvidjaar@mail.ru> $Revision: 39 $
Signed-off-by: Henk de Groot <pe1dnn@amsat.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Include linux/types.h in poch.h, so that poch.h can be included in
user application header files.
Signed-off-by: Vijay Kumar B. <vijaykumar@bravegnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove the circular buffer header. Which has been superseded by the
ioctl consume interface.
Signed-off-by: Vijay Kumar B <vijaykumar@bravegnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Increase groups per interrupt to reduce hogging of the CPU.
Signed-off-by: Vijay Kumar B. <vijaykumar@bravegnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Change user space interface to an IOCTL based interface instead of a
memory mapped circular buffer. The circular buffer had some serious
cache(?) issues and never worked.
Signed-off-by: Vijay Kumar B. <vijaykumar@bravegnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Adds a parameter that causes the hardware to synthesize Rx values
using a counter.
Signed-off-by: Vijay Kumar B. <vijaykumar@bravegnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fold in the TPAL stuff and remove the duplication
Clean up other stuff where we do un-needed work or have verbose implementations
Comment some of the functions as we go
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Clean up the phy code a bit so we can see what needs doing. This involves
moving blocks around and making stuff static
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As with tx there was a pending list Linux doesn't use
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Clean up the names to be Linux like
Remove the unused pad buffer
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Clean up the minor uglies left from the previous work
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The Linux driver doesn't keep a pending queue as the old one did. so we can
remove all the code related to it.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We don't use them for anything having stripped out the debug gunge in
the original driver.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sort out the variable naming and clean up types and obvious trivia
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A little more complex but again move the structure and typedef into into the
documentation
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is basically not really used so turn it into a u32 and comment the
format for reference
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Turn it into a u32 and document the fields in a comment instead
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove the stuff that falls out from this always being zero.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The NMI code is in the shipped driver for "validation". We won't be doing
chip validation and we have proper core nmi handling so this can go.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Perform some easy tidying so we can see what needs to be done next
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This puts all the eeprom handling in one place and cleans up the interfaces
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Turn this one into something resembling a clean Linux driver
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The definition of slic_netdev_ops has initializations of a local function
and eth_mac_addr for its ndo_set_mac_address field. This change uses only
the local function.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r@
identifier I, s, fld;
position p0,p;
expression E;
@@
struct I s =@p0 { ... .fld@p = E, ...};
@s@
identifier I, s, r.fld;
position r.p0,p;
expression E;
@@
struct I s =@p0 { ... .fld@p = E, ...};
@script:python@
p0 << r.p0;
fld << r.fld;
ps << s.p;
pr << r.p;
@@
if int(ps[0].line)!=int(pr[0].line) or int(ps[0].column)!=int(pr[0].column):
cocci.print_main(fld,p0)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Both the max1363 and lis3l02dq modules rely on IIO trigger support in
their ring buffer implementations, which is presently a separate config
option. In the case of IIO_RING_BUFFER=y and IIO_TRIGGER=n, we end up
with the following:
ERROR: "iio_trigger_attach_poll_func" [drivers/staging/iio/adc/max1363.ko] undefined!
ERROR: "iio_trigger_dettach_poll_func" [drivers/staging/iio/adc/max1363.ko] undefined!
ERROR: "iio_trigger_unregister" [drivers/staging/iio/accel/lis3l02dq.ko] undefined!
ERROR: "iio_trigger_notify_done" [drivers/staging/iio/accel/lis3l02dq.ko] undefined!
ERROR: "iio_trigger_read_name" [drivers/staging/iio/accel/lis3l02dq.ko] undefined!
ERROR: "iio_trigger_poll" [drivers/staging/iio/accel/lis3l02dq.ko] undefined!
ERROR: "iio_trigger_attach_poll_func" [drivers/staging/iio/accel/lis3l02dq.ko] undefined!
ERROR: "iio_trigger_register" [drivers/staging/iio/accel/lis3l02dq.ko] undefined!
ERROR: "iio_free_trigger" [drivers/staging/iio/accel/lis3l02dq.ko] undefined!
ERROR: "iio_trigger_dettach_poll_func" [drivers/staging/iio/accel/lis3l02dq.ko] undefined!
ERROR: "iio_allocate_trigger" [drivers/staging/iio/accel/lis3l02dq.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2
This adds an IIO_TRIGGER select for these two drivers conditional on
IIO ring buffer support. Caught with an SH randconfig in -next.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix iio header files kernel-doc notation errors, spelling, typos,
indentation, grammar, etc.
It would also be good if these function names were spelled
correctly, but I didn't change them:
iio_push_or_escallate_ring_event()
iio_trigger_dettach_poll_func()
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trivial patch which adds the __init/__exit macros to the module_init/
module_exit functions of drivers/staging/phison/phison.c
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trivial patch which adds the __init/__exit macros to the module_init/
module_exit functions of drivers/staging/p9auth/p9auth.c
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trivial patch which adds the __init/__exit macros to the module_init/
module_exit functions of ./staging/cx25821/cx25821-core.c
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trivial patch which adds the __init/__exit macros to the module_init/
module_exit functions of ./staging/et131x/et131x_initpci.c
Greg, please have a look at the small patch and either pull it through
your staging tree, or please ack' it so Jiri can pull it through the trivial tree.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Creates RAM based block devices (/dev/ramzswapX) which can be
used (only) as swap disks. Pages swapped to these are compressed
and stored in memory itself.
The module is called ramzswap.ko. It depends on:
- xvmalloc memory allocator (compiled with this driver)
- lzo_compress.ko
- lzo_decompress.ko
See ramzswap.txt for usage details.
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Features:
- Low metadata overhead (just 4 bytes per object)
- O(1) Alloc/Free - except when we have to call system page allocator to
get additional memory.
- Very low fragmentation: In all tests, xvmalloc memory usage is within 12%
of "Ideal".
- Pool based allocator: Each pool can grow and shrink.
- It maps pages only when required. So, it does not hog vmalloc area which
is very small on 32-bit systems.
SLUB allocator could not be used due to fragmentation issues:
http://code.google.com/p/compcache/wiki/AllocatorsComparison
Data here shows kmalloc using ~43% more memory than TLSF and xvMalloc
is showed ~2% more space efficiency than TLSF (due to smaller metadata).
Creating various kmem_caches can reduce space efficiency gap but still
problem of being limited to low memory exists. Also, it depends on
allocating higher order pages to reduce fragmentation - this is not
acceptable for ramzswap as it is used under memory crunch (its a swap
device!).
SLOB allocator could not be used do to reasons mentioned here:
http://lkml.org/lkml/2009/3/18/210
* Implementation:
It uses two-level bitmap search to find free list containing block of
correct size. This idea is taken from TLSF (Two-Level Segregate Fit)
allocator and is well explained in its paper (see [Links] below).
* Limitations:
- Poor scalability: No per-cpu data structures (work in progress).
[Links]
1. Details and Performance data:
http://code.google.com/p/compcache/wiki/xvMallochttp://code.google.com/p/compcache/wiki/xvMallocPerformance
2. TLSF memory allocator:
home: http://rtportal.upv.es/rtmalloc/
paper: http://rtportal.upv.es/rtmalloc/files/MRBC_2008.pdf
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The COMEDI_CMDTEST ioctl needs to clear unsupported bits in the
struct comedi_cmd's convert_src and other *_src members. This
needs fixing in the pcl816 driver's AI cmdtest.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The i8253_cascade_ns_to_timer_2div() function (and
i8253_cascade_ns_to_timer macro) checks the old values *d1 and *d2
for correctness as a heuristic before calculating new values. Don't
call the function with uninitialized values in *d1 and *d2.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
512 bytes of stack can be saved in serial_2002_open() by modifying
'struct config_t'. A short int suffices for the 'kind' and 'bits'
members. (Actually, a char would suffice, but wouldn't save any more
stack than a short int.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I've fixed a bug in the USBDUX driver which caused timeouts while
sending commands to the boards. This was mainly because of one bulk
transfer which had a timeout of 1ms (!). I've now set all timeouts to
1000ms.
From: Bernd Porr <BerndPorr@f2s.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
add KERN_ facility to printk (mostly KERN_INFO, some KERN_WARNING)
I think I found a bug - commented on it but didn't change as it's just
in a printk (off by 1 error in output)
Signed-off-by: Dirk Hohndel <hohndel@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
No code changes - left some 80 char violations alone as
folding those lines would have made code less readable
Signed-off-by: Dirk Hohndel <hohndel@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
no code changes, just fixing white space, line length, etc
Signed-off-by: Dirk Hohndel <hohndel@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Style cleanup in staging based on Greg's tutorial / checkpatch
Fix 80 char line length (where useful) - includes two changes to code
to make it more logical / readable
Remove {} around single line blocks
Signed-off-by: Dirk Hohndel <hohndel@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes all warnings as issued by checkpatch.pl.
Note that I had to modify some of the logging messages to make that possible.
Signed-off-by: Klaas van Gend <klaas.van.gend@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes all warnings as issued by checkpatch.pl.
Signed-off-by: Klaas van Gend <klaas.van.gend@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The variables are unsigned so the test `>= 0' is always true,
In these cases the other part of the test catch wrapped values.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add KERN_ to printk statements to reduce the number of warnings
shown by checkpatch.pl.
Signed-off-by: Klaas van Gend <klaas.van.gend@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove braces in if statements to make the file exhibit less warnings
when checked using checkpatch.pl.
Signed-off-by: Klaas van Gend <klaas.van.gend@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
All new kernels have support for compat_ioctl so remove the check and support
for older kernels.
Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
All new kernels have unlocked_ioctl so we don't need to check.
Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
something-bility is spelled as something-blity so a grep for 'blit'
would find these lines
this is so trivial that I didn't split it by subsystem / copy additional
maintainers - all changes are to comments The only purpose is to get
fewer false positives when grepping around the kernel sources.
Signed-off-by: Dirk Hohndel <hohndel@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Clean up the printk's in this driver.
Signed-off-by: Bruce Jones <brucej@linux.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Clean up formatting of a struct initializer, as per the
standard conventions.
Signed-off-by: Bruce Jones <brucej@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix improper use of printks in this driver. Most are
debug messages under a DEBUG #ifdef, a few are info/warnings
that should get logged for driver error conditions.
Signed-off-by: Bruce Jones <brucej@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Turn spaces into tabs to keep scripts/checkpatch.pl happy. The
actual changes here are in a comment, so the script is just
being silly.
Signed-off-by: Bruce Jones <brucej@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix improper use of braces in drivers/staging/comedi/drivers/ni_atmio16d.c
Signed-off-by: Bruce Jones <brucej@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Correct formatting errors - in this case line length and spaces before
parens.
Signed-off-by: Bruce Jones <brucej@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The line was too long, used braces on single line for loop body.
Signed-off-by: Allison Randal <allison@parrot.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix printk format warnings in line6/pod.c; sizeof() is of type
size_t, so use %zu.
drivers/staging/line6/pod.c:581: warning: format '%d' expects type 'int', but argument 4 has type 'long unsigned int'
drivers/staging/line6/pod.c:693: warning: format '%d' expects type 'int', but argument 4 has type 'long unsigned int'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
- Factorize the code from line6_send_raw_message and line6_send_program into line6_send
- Minor style cleanups
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@xprog.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add support for RT3090 chipset
(based on 2009_0612_RT3090_Linux_STA_V2.1.0.0_DPO).
Tested with RT2860.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Port changes from:
* 2009_0420_RT2860_Linux_STA_V2.1.0.0
* 2009_0302_RT2870_Linux_STA_v2.1.0.0
* 2009_0525_RT3070_Linux_STA_v2.1.1.0
to in-kernel drivers.
From the RT2860 driver release note:
[2.1.0.0]
1. New generation schema for multiple OS porting
2. Fixed Ad-hoc ping failed in noisy environment. (Probe Response has too
many retry packet then cause "not enough space in MgmtRing")
3. Fixed WPA(2)PSK issue when group cipher of AP is WEP40 or WEP104.
4. Modified iwpriv ra0 get_site_survey:
In scan list result: Security shows "NONE" when AP is OPEN/NONE,
shows "WEP" when AP is OPEN/WEP or SHARED/WEP, shows
"WPAPSK(WPA2PSK)/TKIP(AES)" when AP is WPAPSK(WPA2PSK)/TKIP(AES)
shows "WPA(WPA2)/TKIP(AES)" when AP is WPA(WPA2)/TKIP(AES)
5. Support kthread.
6. Add New A band channel list region 15 contains the whole channels in
the A band region 4 and the new CE channel 167,169,171,173
7. Add New IEEE802.11r functionality.
8. Fixed WPA2-Enterprise failed when AP reboot or turn off then turn on.
9. Fixed STA cannot connect to 11B only AP when the setting of is PHY_11GN.
From the RT2870 driver release note:
[V2.1.0.0]
1. New generation schema for multiple OS porting.
2. Fixed Ad-hoc ping failed in noisy environment. (Probe Response has too
many retry packet then cause "not enough space in MgmtRing").
3. Fixed WPS failed with D-Link DIR-628 in 5GHz.
4. Change FastRoaming in DAT file to AutoRoaming.
5. Support kthread.
6. Add New A band channel list region 15 contains the whole channels in
the A band region and the new CE channel 167,169,171,173.
7. New IEEE802.11r functionality.
From the RT3070 driver release note:
Version V2.1.1.0
1. Linux kernel 2.6.29 support.
2. Fix eFuse write from BIN file bug.
Version 2.1.0.0
1. New generation schema for multiple OS porting
2. Fixed Ad-hoc ping failed in noisy environment.
3. Modified iwpriv ra0 get_site_survey:
4. Change FastRoaming in DAT file to AutoRoaming.
5. Support kthread.
6. New IEEE802.11r functionality.
Tested with RT2860 and RT3070 chipsets.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This makes rt3090 match other Ralink drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This makes rt3090 match other Ralink drivers and V2.2.0.0 vendor version.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Disable ATE debugging functionality.
This makes rt3090 match other Ralink drivers and V2.2.0.0 vendor version.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
