There is one issue relates to Coarse Power Gating(CPG) on KBL NUC in GVT-g,
vgpu can't get the correct default context by updating the registers before
inhibit context submission. It always get back the hardware default value
unless the inhibit context submission happened before the 1st time
forcewake put. With this wrong default context, vgpu will run with
incorrect state and meet unknown issues.
The solution is initialize these mmios by adding lri command in ring buffer
of the inhibit context, then gpu hardware has no chance to go down RC6 when
lri commands are right being executed, and then vgpu can get correct
default context for further use.
v3:
- fix code fault, use 'for' to loop through mmio render list(Zhenyu)
v4:
- save the count of engine mmio need to be restored for inhibit context and
refine some comments. (Kevin)
v5:
- code rebase
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
No functional change, just for easy to use.
v4:
- refine comment (Kevin)
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
No functional change. This defination will also be used in future patchesi.
v4:
- refine patch description (Kevin)
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
We don't know how many page tables will be shadowed. It varies
considerably corresponding to guest load. Radix tree is a better
choice for us. Since Page Frame Number is used as key so most of
the bits are common.
Here is some performance data (duration in us) of looking up a
element:
Before: (aka. ppgtt_find_shadow_page)
0.308 0.292 0.246 0.432 0.143 ... 0.311 0.225 0.382 0.199 0.325
After: (aka. intel_vgpu_find_spt_by_mfn)
0.106 0.106 0.107 0.106 0.105 0.107 ... 0.107 0.109 0.105 0.108
This time I didn't get the early data of hash table. The data is
measured when desktop is shown.
As last change, the overall benchmark almost is not changed, but
we get better scalability.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This patch provide generic page_track infrastructure for write-protected
guest page. The old page_track logic gets rewrote and now stays in a new
standalone page_track.c. This page track infrastructure can be both used
by vGUC and GTT shadowing.
The important change is that it uses radix tree instead of hash table.
We don't have a predictable number of pages that will be tracked.
Here is some performance data (duration in us) of looking up a element:
Before: (aka. intel_vgpu_find_tracked_page)
0.091 0.089 0.090 ... 0.093 0.091 0.087 ... 0.292 0.285 0.292 0.291
After: (aka. intel_vgpu_find_page_track)
0.104 0.105 0.100 0.102 0.102 0.100 ... 0.101 0.101 0.105 0.105
The hash table has good performance at beginning, but turns bad with
more pages being tracked even no 3D applications are running. As
expected, radix tree has stable duration and very quick.
The overall benchmark (tested with Heaven Benchmark) marginally improved
since this is not the bottleneck. What we benefit more from this change
is scalability.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Don't extend page_track to mpt layer. Keep MPT simple and clean.
Meanwhile remove gtt.n_tracked_guest_page which doesn't make much
sense.
v2: clean up gtt.n_tracked_guest_page.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The kvmgt's implementation of mpt api {set,unset}_wp_page is not real
write-protection - the data get written before invoke this two api.
As discussed, change the mpt api to match the real behavior.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The target structure of some functions is struct intel_vgpu_ppgtt_spt and
their names are xxx_shadow_page. It should be xxx_shadow_page_table. Let's
use short name 'spt' instead to reduce the length. As well as the hash
table name.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This is a another big one and the GVT shadow page management code is
heavily refined.
The new code only use struct intel_vgpu_ppgtt_spt to represent a vgpu
shadow page table - w/ or wo/ a guest page associated with. A pure shadow
page (no guest page associated) will be used to shadow splited 2M huge
gtt. In this case, the spt.guest_page.gfn should be a zero.
To search a existed shadow page table, we have two new interfaces:
- intel_vgpu_find_spt_by_gfn(), find a spt by guest gfn. It must not
be a pure spt.
- intel_vgpu_find_spt_by_mfn, Find the spt using shadow page mfn in
shadowed PTE.
The oos_page management is remained as what is was.
v2: Split some changes into small standalone patches.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Make the shadow PTE population code clear. Later we will add huge gtt
support based on this.
v2:
- rebase to latest code.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Reviewed-by: Zhi Wang <zhi.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
GTT entry has similar format with the CPU PTE. We'd prefer named macro
instead of hardcode.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Factor out these two interfaces so we can kill some duplicated code in
scheduler.c.
v2:
- rename to intel_vgpu_{get,put}_ppgtt_mm
- refine handle_g2v_notification
Signed-off-by: Changbin Du <changbin.du@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Accurate names help to avoid confusing so improve readability.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This add a new macro gvt_vdbg_mm() to print more verbose logs for
gtt shadowing. The added verbose logs are very useful for debugging.
gvt_vdbg_mm() only comes into effect if VERBOSE_DEBUG is defined by
the developer.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Less code and use existed helper ggtt_set_host_entry.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Separate ggtt and ppgtt since they are different. A little more code but
straightforward.
And move these helpers to gtt.c since that is the only client.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
If we manage an object with a reference count, then its life cycle
must flow the reference count operations. Meanwhile, change the
operation functions to generic name *put* and *get*.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This is a big one and the GVT shadow graphic memory management code is
heavily refined. The new code is more straightforward with less code.
The struct intel_vgpu_mm is restructured to be clearly defined, use
accurate names and some of the original fields are removed which are
really redundant.
Now we only manage ppgtt mm object with mm->ppgtt_mm.lru_list. No need
to mix ppgtt and ggtt together, since one vGPU only has one ggtt object.
v4: Don't invoke ppgtt_free_all_shadow_page before intel_vgpu_destroy_all_ppgtt_mm.
v3: Add GVT_RING_CTX_NR_PDPS to avoid confusing about the PDPs.
v2: Split some changes into small standalone patches.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
If we fail to authenticate HuC firmware, we should change
its load status to FAIL. While around, print HUC_STATUS
on firmware verification failure.
v2: keep the variables sorted by length (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180302133718.1260-1-michal.wajdeczko@intel.com
We want to use higher level 'uc' functions as the main entry points to
the GuC/HuC code to hide some details and keep code layered.
While here, move call to disable_guc_interrupts after sending suspend
action to the GuC to allow it work also with CTB as comm mechanism.
v2: update commit msg (Sagar)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180302111550.21328-1-michal.wajdeczko@intel.com
During reset/wedging, we have to clean up the requests on the timeline
and flush the pending interrupt state. Currently, we are abusing the irq
disabling of the timeline spinlock to protect the irq state in
conjunction to the engine's timeline requests, but this is accidental
and conflates the spinlock with the irq state. A baffling state of
affairs for the reader.
Instead, explicitly disable irqs over the critical section, and separate
modifying the irq state from the timeline's requests.
Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180302143246.2579-4-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Although this state (execlists->active and engine->irq_posted) itself is
not protected by the engine->timeline spinlock, it does conveniently
ensure that irqs are disabled. We can use this to protect our
manipulation of the state and so ensure that the next IRQ to arrive sees
consistent state and (hopefully) ignores the reset engine.
Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180302131246.22036-1-chris@chris-wilson.co.uk
We have two instances of the code to fill out the header for the aux
message. Pull it into a small helper.
v2: Rebase due to txbuf[] changes
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222212802.4826-1-ville.syrjala@linux.intel.com
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Let's try to keep the details on the AKSV stuff concentrated
in one place. So move the control bit and +5 data size handling
there.
v2: Increase txbuf[] to include the payload which intel_dp_aux_xfer()
will still load into the registers even though the hardware
will ignore it
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222212732.4665-1-ville.syrjala@linux.intel.com
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Enabling FBC on a plane having a Y-offset that isn't divisible by 4 may
cause pipe FIFO underruns and flickers, so disable FBC on such a config.
I tried the followings to work around the issue:
- enable each HW work around in ILK_DPFC_CHICKEN
- disable each compression algorithm in ILK_DPFC_CONTROL
- disable low-power watermarks
None of the above got rid of the problem. I haven't found this issue in
the Bspec/WA database either.
Besides the igt testcase below (yet to be merged) an easy way to
reproduce the issue is to enable a plane with FBC and a plane Y-offset
not aligned to 4 and then just enable/disable FBC in a loop, keeping the
plane enabled.
I could trigger the problem on BXT/GLK/SKL/CNL, so assume for now that it's
only present on GEN9 and GEN10.
v2: (Ville)
- Run the test/apply the WA on CNL as well.
- Use IS_GEN() instead of INTEL_GEN().
- Fix spelling.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Testcase: igt/kms_plane/plane-clipping-pipe-A-planes
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301134457.13974-1-imre.deak@intel.com
GuC load function is named intel_guc_fw_upload() and HuC load function is
named intel_huc_init_hw(). Make them consistent intel_*_fw_upload. Also
move HuC fw loading functions and declarations to separate files
intel_huc_fw.c|h like GuC.
While at this, do below changes
1. Update kernel-doc comment for intel_*_fw_upload() functions
2. s/huc_ucode_xfer/huc_fw_xfer
3. Introduce intel_huc_fw_init_early()
v2: Changed patch to update HuC functions instead of changing
guc_fw_upload and update file structure. (Michal Wajdeczko)
v3: Added SPDX License identifier to huc_fw.c|h. (Michal Wajdeczko)
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1519922745-25441-1-git-send-email-sagar.a.kamble@intel.com
Moving the check upwards will mean we we no longer have to add planes
and connectors manually, because everything is handled correctly by
drm_atomic_helper_check_modeset() as intended.
[applied with whitespace changes to make sparse happy]
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221092808.30060-1-maarten.lankhorst@linux.intel.com
Now that we can pass arbitrary commands into the base __wait_for()
macro, we can reimplement the open-coded wait-for inside
i915_gem_idle_work_handler() using the new macro. This means that instead
of using ktime, we now use jiffies, and benefit from the exponential sleep
backoff that allows a fast response if the HW settles quickly.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301103338.5380-1-chris@chris-wilson.co.uk
We're seeing on CI that some contexts don't have the programmed OA
period timer that directs the OA unit on how often to write reports.
The issue is that we're not holding the drm lock from when we edit the
context images down to when we set the exclusive_stream variable. This
leaves a window for the deferred context allocation to call
i915_oa_init_reg_state() that will not program the expected OA timer
value, because we haven't set the exclusive_stream yet.
v2: Drop need_lock from gen8_configure_all_contexts() (Matt)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 701f8231a2 ("drm/i915/perf: prune OA configs")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102254
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103715
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103755
Link: https://patchwork.freedesktop.org/patch/msgid/20180301110613.1737-1-lionel.g.landwerlin@intel.com
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.14+
v2: Rebase.
v3:
* Remove DPF, it has been removed from SKL+.
* Fix -internal rebase wrt. execlists interrupt handling.
v4: Rebase.
v5:
* Updated for POR changes. (Daniele Ceraolo Spurio)
* Merged with irq handling fixes by Daniele Ceraolo Spurio:
* Simplify the code by using gen8_cs_irq_handler.
* Fix interrupt handling for the upstream kernel.
v6:
* Remove early bringup debug messages (Tvrtko)
* Add NB about arbitrary spin wait timeout (Tvrtko)
v7 (from Paulo):
* Don't try to write RO bits to registers.
* Don't check for PCH types that don't exist. PCH interrupts are not
here yet.
v9:
* squashed in selector and shared register handling (Daniele)
* skip writing of irq if data is not valid (Daniele)
* use time_after32 (Chris)
* use I915_MAX_VCS and I915_MAX_VECS (Daniele)
* remove fake pm interrupt handling for later patch (Mika)
v10:
* Direct processing of banks. clear banks early (Chris)
* remove poll on valid bit, only clear valid bit (Mika)
* use raw accessors, better naming (Chris)
v11:
* adapt to raw_reg_[read|write]
* bring back polling the valid bit (Daniele)
v12:
* continue if unset intr_dw (Daniele)
* comment the usage of gen8_de_irq_handler bits (Daniele)
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180228101153.7224-2-mika.kuoppala@linux.intel.com
Gen11 will add more VCS and VECS rings so prepare the
infrastructure to support that.
Bspec: 7021
v2: Rebase.
v3: Rebase.
v4: Rebase.
v5: Rebase.
v6:
- Update for POR changes. (Daniele Ceraolo Spurio)
- Add provisional guc engine ids - to be checked and confirmed.
v7:
- Rebased.
- Added the new ring masks.
- Added the new HW ids.
v8:
- Introduce I915_MAX_VCS/VECS to avoid magic numbers (Michal)
v9: increase MAX_ENGINE_INSTANCE to 3
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180228101153.7224-1-mika.kuoppala@linux.intel.com
To pull in the HDCP changes, especially wait_for changes to drm/i915
that Chris wants to build on top of.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
dp_rates[] array is a superset of all the link rates supported
by sink devices. DP 1.3 specification adds HBR3 (8.1Gbps) link rate
to the set of link rates supported by sink. This patch adds this rate
to dp_rates[] array that gets used to populate the sink_rates[]
array limited by max rate obtained from DP_MAX_LINK_RATE DPCD register.
v2:
* Rebased on top of Jani's localized rates patch
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1519857110-26916-1-git-send-email-manasi.d.navare@intel.com
Driver Changes:
- Lift alpha_support protection from Cannonlake (Rodrigo)
* Meaning the driver should mostly work for the hardware we had
at our disposal when testing
* Used to be preliminary_hw_support
- Add missing Cannonlake PCI device ID of 0x5A4C (Rodrigo)
- Cannonlake port register fix (Mahesh)
- Fix Dell Venue 8 Pro black screen after modeset (Hans)
- Fix for always returning zero out-fence from execbuf (Daniele)
- Fix HDMI audio when no no relevant video output is active (Jani)
- Fix memleak of VBT data on driver_unload (Hans)
- Fix for KASAN found locking issue (Maarten)
- RCU barrier consolidation to improve igt/gem_sync/idle (Chris)
- Optimizations to IRQ handlers (Chris)
- vblank tracking improvements (64-bit resolution, PM) (Dhinakaran)
- Pipe select bit corrections (Ville)
- Reduce runtime computed device_info fields (Chris)
- Tune down some WARN_ONs to GEM_BUG_ON now that CI has good coverage (Chris)
- A bunch of kerneldoc warning fixes (Chris)
* tag 'drm-intel-next-2018-02-21' of git://anongit.freedesktop.org/drm/drm-intel: (113 commits)
drm/i915: Update DRIVER_DATE to 20180221
drm/i915/fbc: Use PLANE_HAS_FENCE to determine if the plane is fenced
drm/i915/fbdev: Use the PLANE_HAS_FENCE flags from the time of pinning
drm/i915: Move the policy for placement of the GGTT vma into the caller
drm/i915: Also check view->type for a normal GGTT view
drm/i915: Drop WaDoubleCursorLP3Latency:ivb
drm/i915: Set the primary plane pipe select bits on gen4
drm/i915: Don't set cursor pipe select bits on g4x+
drm/i915: Assert that we don't overflow frontbuffer tracking bits
drm/i915: Track number of pending freed objects
drm/i915/: Initialise trans_min for skl_compute_transition_wm()
drm/i915: Clear the in-use marker on execbuf failure
drm/i915: Prune gen8_gt_irq_handler
drm/i915: Track GT interrupt handling using the master iir
drm/i915: Remove WARN_ONCE for failing to pm_runtime_if_in_use
drm: intel_dpio_phy: fix kernel-doc comments at nested struct
drm/i915: Release connector iterator on a digital port conflict.
drm/i915/execlists: Remove too early assert
drm/i915: Assert that we always complete a submission to guc/execlists
drm: move read_domains and write_domain into i915
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tkXF
-----END PGP SIGNATURE-----
Merge tag 'tilcdc-4.17' of https://github.com/jsarha/linux into drm-next
drm/tilcdc changes to v4.17
* tag 'tilcdc-4.17' of https://github.com/jsarha/linux:
drm/tilcdc: tilcdc_panel: Rename device from "panel" to "tilcdc-panel"
drm/tilcdc: Add support for drm panels
drm/tilcdc: panel: Use common error handling code in of_get_panel_info()
drm/tilcdc: Delete an error message for a failed memory allocation in seven functions
Localize link rate arrays by moving them to the functions where they're
used. Further clarify the distinction between source and sink
capabilities. Split pre and post Haswell arrays, and get rid of the
array size arithmetics. Use a direct rate value in the paranoia case of
no common rates find.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180227105911.4485-1-jani.nikula@intel.com
While it seems totally unlikely that any system would mix a cpu/north
aux channel with a pch/south port (or vice versa) we should still
consult intel_dp->aux_ch rather than encoder->port when figuring out
which clock is actually used by the aux ch.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222181036.15251-5-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #irc
Although we protect the request itself, we don't lock inside
intel_engine_dump() and so the request maybe retired as we peek into it.
One consequence is that the request->ctx may be freed before we
dereference it, leading to a use-after-free. Replace the hw_id we are
peeking from inside request->ctx with the request->fence.context, with
which we can still track from which context the request originated
(although to tie to HW reports requires a little more legwork, but is
good enough to follow the GEM traces).
[52640.729670] general protection fault: 0000 [#2] SMP
[52640.729694] Dumping ftrace buffer:
[52640.729701] (ftrace buffer empty)
[52640.729705] Modules linked in: vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic x86_pkg_\
temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul snd_hda_intel snd_hda_codec snd_hwdep gha\
sh_clmulni_intel snd_hda_core snd_pcm mei_me mei i915 r8169 mii prime_numbers i2c_hid
[52640.729748] CPU: 2 PID: 4335 Comm: gem_exec_schedu Tainted: G UD W 4.16.0-rc3+ #7
[52640.729759] Hardware name: Acer Aspire E5-575G/Ironman_SK , BIOS V1.12 08/02/2016
[52640.729803] RIP: 0010:print_request+0x2b/0xb0 [i915]
[52640.729811] RSP: 0018:ffffc90001453c18 EFLAGS: 00010206
[52640.729820] RAX: 6b6b6b6b6b6b6b6b RBX: ffff8801e0292d40 RCX: 0000000000000006
[52640.729829] RDX: ffffc90001453c60 RSI: ffff8801e0292d40 RDI: 0000000000000003
[52640.729838] RBP: ffffc90001453d80 R08: 0000000000000000 R09: 0000000000000001
[52640.729847] R10: ffffc90001453bd0 R11: ffffc90001453c73 R12: ffffc90001453c60
[52640.729856] R13: ffffc90001453d80 R14: ffff8801d5a683c8 R15: ffff8801e0292d40
[52640.729866] FS: 00007f1ee50548c0(0000) GS:ffff8801e8200000(0000) knlGS:0000000000000000
[52640.729876] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[52640.729884] CR2: 00007f1ee5077000 CR3: 00000001d9411004 CR4: 00000000003606e0
[52640.729893] Call Trace:
[52640.729922] intel_engine_print_registers+0x623/0x890 [i915]
[52640.729948] intel_engine_dump+0x4a3/0x590 [i915]
[52640.729957] ? seq_printf+0x3a/0x50
[52640.729977] i915_engine_info+0xb8/0xe0 [i915]
[52640.729984] ? drm_mode_gamma_get_ioctl+0xf0/0xf0
[52640.729990] seq_read+0xd5/0x410
[52640.729997] full_proxy_read+0x4b/0x70
[52640.730004] __vfs_read+0x1e/0x120
[52640.730009] ? do_sys_open+0x134/0x220
[52640.730015] ? kmem_cache_free+0x174/0x2b0
[52640.730021] vfs_read+0xa1/0x150
[52640.730026] SyS_read+0x40/0xa0
[52640.730032] do_syscall_64+0x65/0x1a0
[52640.730038] entry_SYSCALL_64_after_hwframe+0x42/0xb7
Reported-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180228094732.28462-1-chris@chris-wilson.co.uk
On pre-HSW we have dedicated hardware for the RGB limited range
handling, and so we don't want to compress with the CSC matrix.
Toss in a FIXME about gamma LUT vs. limited range using the CSC.
Cc: Johnson Lin <johnson.lin@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222214232.6064-4-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
The pipe CSC was introduced by ILK, so change everything related
to use ilk_ as the prefix.
Cc: Johnson Lin <johnson.lin@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222214232.6064-3-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
If we don't have to frob with the user provided ctm matrix there's
no point in copying it over. Just point at the user ctm directly.
Also the matrix gets fully populated by ctm_mult_by_limited() so
no need to zero initialize it.
Cc: Johnson Lin <johnson.lin@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222214232.6064-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
To pull in the HDCP changes, especially wait_for changes to drm/i915
that Chris wants to build on top of.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Rename the bundled tilcdc_panel driver from just "panel" to
"tilcdc-panel" to avoid noisy error messages from the driver trying to
probe all device nodes named "panel".
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>