The Samsung touchkey controllers are often used with external pull-up
for the interrupt line and the I2C lines, so we might need to enable
a regulator to bring the lines into usable state. Otherwise, this might
cause spurious interrupts and reading from I2C will fail.
Document support for a "vddio-supply" that is enabled by the tm2-touchkey
driver so that the regulator gets enabled when needed.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201203131242.44397-2-stephan@gerhold.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Convert the device tree bindings for tm2-touchkey to the YAML format.
While we're at it, clarify the descriptions a bit to make it clear that
this driver can be used for many different MCUs that all implement
a similar I2C protocol. Depending on the MCU the voltage requirements
may be different, on some devices the controller uses 2.2V, 2.8V or
even 3.3V for vcc-supply instead of 1.8V.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201203131242.44397-1-stephan@gerhold.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Now that normal input devices support polling mode, and all users of
input_polled_dev API have been converted, we can remove it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull x86 fixes from Ingo Molnar:
"Two fixes:
- Fix a (hopefully final) IRQ state tracking bug vs MCE handling
- Fix a documentation link"
* tag 'x86-urgent-2020-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/x86: Fix incorrect references to zero-page.txt
x86/mce: Use idtentry_nmi_enter/exit()
Pull networking fixes from David Miller:
1) Make sure SKB control block is in the proper state during IPSEC
ESP-in-TCP encapsulation. From Sabrina Dubroca.
2) Various kinds of attributes were not being cloned properly when we
build new xfrm_state objects from existing ones. Fix from Antony
Antony.
3) Make sure to keep BTF sections, from Tony Ambardar.
4) TX DMA channels need proper locking in lantiq driver, from Hauke
Mehrtens.
5) Honour route MTU during forwarding, always. From Maciej
Żenczykowski.
6) Fix races in kTLS which can result in crashes, from Rohit
Maheshwari.
7) Skip TCP DSACKs with rediculous sequence ranges, from Priyaranjan
Jha.
8) Use correct address family in xfrm state lookups, from Herbert Xu.
9) A bridge FDB flush should not clear out user managed fdb entries
with the ext_learn flag set, from Nikolay Aleksandrov.
10) Fix nested locking of netdev address lists, from Taehee Yoo.
11) Fix handling of 32-bit DATA_FIN values in mptcp, from Mat Martineau.
12) Fix r8169 data corruptions on RTL8402 chips, from Heiner Kallweit.
13) Don't free command entries in mlx5 while comp handler could still be
running, from Eran Ben Elisha.
14) Error flow of request_irq() in mlx5 is busted, due to an off by one
we try to free and IRQ never allocated. From Maor Gottlieb.
15) Fix leak when dumping netlink policies, from Johannes Berg.
16) Sendpage cannot be performed when a page is a slab page, or the page
count is < 1. Some subsystems such as nvme were doing so. Create a
"sendpage_ok()" helper and use it as needed, from Coly Li.
17) Don't leak request socket when using syncookes with mptcp, from
Paolo Abeni.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits)
net/core: check length before updating Ethertype in skb_mpls_{push,pop}
net: mvneta: fix double free of txq->buf
net_sched: check error pointer in tcf_dump_walker()
net: team: fix memory leak in __team_options_register
net: typhoon: Fix a typo Typoon --> Typhoon
net: hinic: fix DEVLINK build errors
net: stmmac: Modify configuration method of EEE timers
tcp: fix syn cookied MPTCP request socket leak
libceph: use sendpage_ok() in ceph_tcp_sendpage()
scsi: libiscsi: use sendpage_ok() in iscsi_tcp_segment_map()
drbd: code cleanup by using sendpage_ok() to check page for kernel_sendpage()
tcp: use sendpage_ok() to detect misused .sendpage
nvme-tcp: check page by sendpage_ok() before calling kernel_sendpage()
net: add WARN_ONCE in kernel_sendpage() for improper zero-copy send
net: introduce helper sendpage_ok() in include/linux/net.h
net: usb: pegasus: Proper error handing when setting pegasus' MAC address
net: core: document two new elements of struct net_device
netlink: fix policy dump leak
net/mlx5e: Fix race condition on nhe->n pointer in neigh update
net/mlx5e: Fix VLAN create flow
...
Pull power management fixes from Rafael Wysocki:
"These fix one more issue related to the recent RCU-lockdep changes, a
typo in documentation and add a missing return statement to
intel_pstate.
Specifics:
- Fix up RCU usage for cpuidle on the ARM imx6q platform (Ulf
Hansson)
- Fix typo in the PM documentation (Yoann Congal)
- Add return statement that is missing after recent changes in the
intel_pstate driver (Zhang Rui)"
* tag 'pm-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ARM: imx6q: Fixup RCU usage for cpuidle
Documentation: PM: Fix a reStructuredText syntax error
cpufreq: intel_pstate: Fix missing return statement
Pull GPIO fixes from Linus Walleij:
"Some late GPIO fixes for the v5.9 series:
- Fix compiler warnings on the OMAP when PM is disabled
- Clear the interrupt when setting edge sensitivity on the Spreadtrum
driver.
- Fix up spurious interrupts on the TC35894.
- Support threaded interrupts on the Siox controller.
- Fix resource leaks on the mockup driver.
- Fix line event handling in syscall compatible mode for the
character device.
- Fix an unitialized variable in the PCA953A driver.
- Fix access to all GPIO IRQs on the Aspeed AST2600.
- Fix line direction on the AMD FCH driver.
- Use the bitmap API instead of compiler intrinsics for bit
manipulation in the PCA953x driver"
* tag 'gpio-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: pca953x: Correctly initialize registers 6 and 7 for PCA957x
gpio: pca953x: Use bitmap API over implicit GCC extension
gpio: amd-fch: correct logic of GPIO_LINE_DIRECTION
gpio: aspeed: fix ast2600 bank properties
gpio/aspeed-sgpio: don't enable all interrupts by default
gpio/aspeed-sgpio: enable access to all 80 input & output sgpios
gpio: pca953x: Fix uninitialized pending variable
gpiolib: Fix line event handling in syscall compatible mode
gpio: mockup: fix resource leak in error path
gpio: siox: explicitly support only threaded irqs
gpio: tc35894: fix up tc35894 interrupt configuration
gpio: sprd: Clear interrupt when setting the type as edge
gpio: omap: Fix warnings if PM is disabled
Fix a reStructuredText syntax error in the cpuidle PM admin-guide
documentation: the ``...'' quotation marks are parsed as partial ''...''
reStructuredText markup and break the output formatting.
This change them to "...".
Signed-off-by: Yoann Congal <yoann.congal@smile.fr>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull devicetree fixes from Rob Herring:
- Fix handling of HOST_EXTRACFLAGS for dtc
- Several warning fixes for DT bindings
* tag 'devicetree-fixes-for-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
scripts/dtc: only append to HOST_EXTRACFLAGS instead of overwriting
dt-bindings: Fix 'reg' size issues in zynqmp examples
ARM: dts: bcm2835: Change firmware compatible from simple-bus to simple-mfd
dt-bindings: leds: cznic,turris-omnia-leds: fix error in binding
dt-bindings: crypto: sa2ul: fix a DT binding check warning
The default sizes in examples for 'reg' are 1 cell each. Fix the
incorrect sizes in zynqmp examples:
Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.example.dt.yaml: example-0: dma-controller@fd4c0000:reg:0: [0, 4249616384, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:0: [0, 4249485312, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:1: [0, 4249526272, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:2: [0, 4249530368, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:3: [0, 4249534464, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Cc: Hyun Kwon <hyun.kwon@xilinx.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: dmaengine@vger.kernel.org
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rob Herring <robh@kernel.org>
gpio: fixes for v5.9-rc7
- fix uninitialized variable in gpio-pca953x
- enable all 160 lines and fix interrupt configuration in gpio-aspeed-gpio
- fix ast2600 bank properties in gpio-aspeed
The current binding for the RPi firmware uses the simple-bus compatible as
a fallback to benefit from its automatic probing of child nodes.
However, simple-bus also comes with some constraints, like having the ranges,
our case.
Let's switch to simple-mfd that provides the same probing logic without
those constraints.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200924082642.18144-1-maxime@cerno.tech
Signed-off-by: Rob Herring <robh@kernel.org>
Pull Kbuild fixes from Masahiro Yamada:
- ignore compiler stubs for PPC to fix builds
- fix the usage of --target mentioned in the LLVM document
* tag 'kbuild-fixes-v5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Documentation/llvm: Fix clang target examples
scripts/kallsyms: skip ppc compiler stub *.long_branch.* / *.plt_branch.*
clang --target=<triple> is how we can specify a particular toolchain
triple to be use, fix the two occurences in the documentation.
Fixes: fcf1b6a35c ("Documentation/llvm: add documentation on building w/ Clang/LLVM")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull media fixes from Mauro Carvalho Chehab:
- fix a regression at the CEC adapter core
- two uAPI patches (one revert) for changes in this development cycle
* tag 'media/v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: dt-bindings: media: imx274: Convert to json-schema
media: media/v4l2: remove V4L2_FLAG_MEMORY_NON_CONSISTENT flag
media: cec-adap.c: don't use flush_scheduled_work()
Currently, the aspeed-sgpio driver exposes up to 80 GPIO lines,
corresponding to the 80 status bits available in hardware. Each of these
lines can be configured as either an input or an output.
However, each of these GPIOs is actually an input *and* an output; we
actually have 80 inputs plus 80 outputs.
This change expands the maximum number of GPIOs to 160; the lower half
of this range are the input-only GPIOs, the upper half are the outputs.
We fix the GPIO directions to correspond to this mapping.
This also fixes a bug when setting GPIOs - we were reading from the
input register, making it impossible to set more than one output GPIO.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Fixes: 7db47faae7 ("gpio: aspeed: Add SGPIO driver")
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Pull device mapper fixes from Mike Snitzer:
- DM core fix for incorrect double bio splitting. Keep "fixing" this
because past attempts didn't fully appreciate the liability relative
to recursive bio splitting. This fix limits DM's bio splitting to a
single method and does _not_ use blk_queue_split() for normal IO.
- DM crypt Documentation updates for features added during 5.9 merge.
* tag 'for-5.9/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm crypt: document encrypted keyring key option
dm crypt: document new no_workqueue flags
dm: fix comment in dm_process_bio()
dm: fix bio splitting and its bio completion order for regular IO
Pull networking fixes from Jakub Kicinski:
- fix failure to add bond interfaces to a bridge, the offload-handling
code was too defensive there and recent refactoring unearthed that.
Users complained (Ido)
- fix unnecessarily reflecting ECN bits within TOS values / QoS marking
in TCP ACK and reset packets (Wei)
- fix a deadlock with bpf iterator. Hopefully we're in the clear on
this front now... (Yonghong)
- BPF fix for clobbering r2 in bpf_gen_ld_abs (Daniel)
- fix AQL on mt76 devices with FW rate control and add a couple of AQL
issues in mac80211 code (Felix)
- fix authentication issue with mwifiex (Maximilian)
- WiFi connectivity fix: revert IGTK support in ti/wlcore (Mauro)
- fix exception handling for multipath routes via same device (David
Ahern)
- revert back to a BH spin lock flavor for nsid_lock: there are paths
which do require the BH context protection (Taehee)
- fix interrupt / queue / NAPI handling in the lantiq driver (Hauke)
- fix ife module load deadlock (Cong)
- make an adjustment to netlink reply message type for code added in
this release (the sole change touching uAPI here) (Michal)
- a number of fixes for small NXP and Microchip switches (Vladimir)
[ Pull request acked by David: "you can expect more of this in the
future as I try to delegate more things to Jakub" ]
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (167 commits)
net: mscc: ocelot: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
net: dsa: seville: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
net: dsa: felix: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
inet_diag: validate INET_DIAG_REQ_PROTOCOL attribute
net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCU
net: Update MAINTAINERS for MediaTek switch driver
net/mlx5e: mlx5e_fec_in_caps() returns a boolean
net/mlx5e: kTLS, Avoid kzalloc(GFP_KERNEL) under spinlock
net/mlx5e: kTLS, Fix leak on resync error flow
net/mlx5e: kTLS, Add missing dma_unmap in RX resync
net/mlx5e: kTLS, Fix napi sync and possible use-after-free
net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported
net/mlx5e: Fix using wrong stats_grps in mlx5e_update_ndo_stats()
net/mlx5e: Fix multicast counter not up-to-date in "ip -s"
net/mlx5e: Fix endianness when calculating pedit mask first bit
net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported
net/mlx5e: CT: Fix freeing ct_label mapping
net/mlx5e: Fix memory leak of tunnel info when rule under multipath not ready
net/mlx5e: Use synchronize_rcu to sync with NAPI
net/mlx5e: Use RCU to protect rq->xdp_prog
...
Commit 27f5411a71 ("dm crypt: support using encrypted keys")
introduced support for encrypted keyring type.
Fix documentation in admin guide to mention this type.
Fixes: 27f5411a71 ("dm crypt: support using encrypted keys")
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Pull kvm fixes from Paolo Bonzini:
"ARM:
- fix fault on page table writes during instruction fetch
s390:
- doc improvement
x86:
- The obvious patches are always the ones that turn out to be
completely broken. /me hangs his head in shame"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
Revert "KVM: Check the allocation of pv cpu mask"
KVM: arm64: Remove S1PTW check from kvm_vcpu_dabt_iswrite()
KVM: arm64: Assume write fault on S1PTW permission fault on instruction fetch
docs: kvm: add documentation for KVM_CAP_S390_DIAG318
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 5.9:
- Opt us out of the DEBUG_VM_PGTABLE support for now as it's causing
crashes.
- Fix a long standing bug in our DMA mask handling that was hidden
until recently, and which caused problems with some drivers.
- Fix a boot failure on systems with large amounts of RAM, and no
hugepage support and using Radix MMU, only seen in the lab.
- A few other minor fixes.
Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Gautham R. Shenoy,
Hari Bathini, Ira Weiny, Nick Desaulniers, Shirisha Ganta, Vaibhav
Jain, and Vaidyanathan Srinivasan"
* tag 'powerpc-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/papr_scm: Limit the readability of 'perf_stats' sysfs attribute
cpuidle: pseries: Fix CEDE latency conversion from tb to us
powerpc/dma: Fix dma_map_ops::get_required_mask
Revert "powerpc/build: vdso linker warning for orphan sections"
powerpc/mm: Remove DEBUG_VM_PGTABLE support on powerpc
selftests/powerpc: Skip PROT_SAO test in guests/LPARS
powerpc/book3s64/radix: Fix boot failure with large amount of guest memory
Tunnel offload info code uses ETHTOOL_MSG_TUNNEL_INFO_GET message type (cmd
field in genetlink header) for replies to tunnel info netlink request, i.e.
the same value as the request have. This is a problem because we are using
two separate enums for userspace to kernel and kernel to userspace message
types so that this ETHTOOL_MSG_TUNNEL_INFO_GET (28) collides with
ETHTOOL_MSG_CABLE_TEST_TDR_NTF which is what message type 28 means for
kernel to userspace messages.
As the tunnel info request reached mainline in 5.9 merge window, we should
still be able to fix the reply message type without breaking backward
compatibility.
Fixes: c7d759eb7b ("ethtool: add tunnel info interface")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf 2020-09-15
The following pull-request contains BPF updates for your *net* tree.
We've added 12 non-merge commits during the last 19 day(s) which contain
a total of 10 files changed, 47 insertions(+), 38 deletions(-).
The main changes are:
1) docs/bpf fixes, from Andrii.
2) ld_abs fix, from Daniel.
3) socket casting helpers fix, from Martin.
4) hash iterator fixes, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The patch partially reverts some of the UAPI bits of the buffer
cache management hints. Namely, the queue consistency (memory
coherency) user-space hint because, as it turned out, the kernel
implementation of this feature was misusing DMA_ATTR_NON_CONSISTENT.
The patch reverts both kernel and user space parts: removes the
DMA consistency attr functions, rolls back changes to v4l2_requestbuffers,
v4l2_create_buffers structures and corresponding UAPI functions
(plus compat32 layer) and cleans up the documentation.
[hverkuil: fixed a few typos in the commit log]
[hverkuil: fixed vb2_core_reqbufs call in drivers/media/dvb-core/dvb_vb2.c]
[mchehab: fixed a typo in the commit log: revers->reverts]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Pull ARM SoC fixes from Olof Johansson:
"A collection of fixes I've been accruing over the last few weeks, none
of them have been severe enough to warrant flushing the queue but it's
been long enough now that it's a good idea to send them in.
A handful of them are fixups for QSPI DT/bindings/compatibles, some
smaller fixes for system DMA clock control and TMU interrupts on i.MX,
a handful of fixes for OMAP, including a fix for DSI (display) on
omap5"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (27 commits)
arm64: dts: ns2: Fixed QSPI compatible string
ARM: dts: BCM5301X: Fixed QSPI compatible string
ARM: dts: NSP: Fixed QSPI compatible string
ARM: dts: bcm: HR2: Fixed QSPI compatible string
dt-bindings: spi: Fix spi-bcm-qspi compatible ordering
ARM: dts: imx6sx: fix the pad QSPI1B_SCLK mux mode for uart3
arm64: dts: imx8mp: correct sdma1 clk setting
arm64: dts: imx8mq: Fix TMU interrupt property
ARM: dts: imx7d-zii-rmu2: fix rgmii phy-mode for ksz9031 phy
ARM: dts: vfxxx: Add syscon compatible with OCOTP
ARM: dts: imx6q-logicpd: Fix broken PWM
arm64: dts: imx: Add missing imx8mm-beacon-kit.dtb to build
ARM: dts: imx6q-prtwd2: Remove unneeded i2c unit name
ARM: dts: imx6qdl-gw51xx: Remove unneeded #address-cells/#size-cells
ARM: dts: imx7ulp: Correct gpio ranges
ARM: dts: ls1021a: fix QuadSPI-memory reg range
arm64: defconfig: Enable ptn5150 extcon driver
arm64: defconfig: Enable USB gadget with configfs
ARM: configs: Update Integrator defconfig
ARM: dts: omap5: Fix DSI base address and clocks
...
Pull char / misc driver fixes from Greg KH:
"Here are a number of small driver fixes for 5.9-rc5
Included in here are:
- habanalabs driver fixes
- interconnect driver fixes
- soundwire driver fixes
- dyndbg fixes for reported issues, and then reverts to fix it all up
to a sane state.
- phy driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Revert "dyndbg: accept query terms like file=bar and module=foo"
Revert "dyndbg: fix problem parsing format="foo bar""
scripts/tags.sh: exclude tools directory from tags generation
video: fbdev: fix OOB read in vga_8planes_imageblit()
dyndbg: fix problem parsing format="foo bar"
dyndbg: refine export, rename to dynamic_debug_exec_queries()
dyndbg: give %3u width in pr-format, cosmetic only
interconnect: qcom: Fix small BW votes being truncated to zero
soundwire: fix double free of dangling pointer
interconnect: Show bandwidth for disabled paths as zero in debugfs
habanalabs: fix report of RAZWI initiator coordinates
habanalabs: prevent user buff overflow
phy: omap-usb2-phy: disable PHY charger detect
phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY init
soundwire: bus: fix typo in comment on INTSTAT registers
phy: qualcomm: fix return value check in qcom_ipq806x_usb_phy_probe()
phy: qualcomm: fix platform_no_drv_owner.cocci warnings
Pull kvm fixes from Paolo Bonzini:
"A bit on the bigger side, mostly due to me being on vacation, then
busy, then on parental leave, but there's nothing worrisome.
ARM:
- Multiple stolen time fixes, with a new capability to match x86
- Fix for hugetlbfs mappings when PUD and PMD are the same level
- Fix for hugetlbfs mappings when PTE mappings are enforced (dirty
logging, for example)
- Fix tracing output of 64bit values
x86:
- nSVM state restore fixes
- Async page fault fixes
- Lots of small fixes everywhere"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: emulator: more strict rsm checks.
KVM: nSVM: more strict SMM checks when returning to nested guest
SVM: nSVM: setup nested msr permission bitmap on nested state load
SVM: nSVM: correctly restore GIF on vmexit from nesting after migration
x86/kvm: don't forget to ACK async PF IRQ
x86/kvm: properly use DEFINE_IDTENTRY_SYSVEC() macro
KVM: VMX: Don't freeze guest when event delivery causes an APIC-access exit
KVM: SVM: avoid emulation with stale next_rip
KVM: x86: always allow writing '0' to MSR_KVM_ASYNC_PF_EN
KVM: SVM: Periodically schedule when unregistering regions on destroy
KVM: MIPS: Change the definition of kvm type
kvm x86/mmu: use KVM_REQ_MMU_SYNC to sync when needed
KVM: nVMX: Fix the update value of nested load IA32_PERF_GLOBAL_CTRL control
KVM: fix memory leak in kvm_io_bus_unregister_dev()
KVM: Check the allocation of pv cpu mask
KVM: nVMX: Update VMCS02 when L2 PAE PDPTE updates detected
KVM: arm64: Update page shift if stage 2 block mapping not supported
KVM: arm64: Fix address truncation in traces
KVM: arm64: Do not try to map PUDs when they are folded into PMD
arm64/x86: KVM: Introduce steal-time cap
...
Remove link to litmus tests that didn't make it to upstream. Fix ringbuf
benchmark link.
I wasn't able to test this with `make htmldocs`, unfortunately, because of
Sphinx dependencies. But bench_ringbufs.c path is certainly correct now.
Fixes: 97abb2b396 ("docs/bpf: Add BPF ring buffer design notes")
Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200910225245.2896991-1-andriin@fb.com
The binding is currently incorrectly defining the compatible strings
from least specifice to most specific instead of the converse. Re-order
them from most specific (left) to least specific (right) and fix the
examples as well.
Fixes: 5fc78f4c84 ("spi: Broadcom BRCMSTB, NSP, NS2 SoC bindings")
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
DT binding check produces a warning about bad cell size:
Documentation/devicetree/bindings/crypto/ti,sa2ul.example.dt.yaml: example-0: crypto@4e00000:reg:0: [0, 81788928, 0, 4608] is too long
From schema: python3.6/site-packages/dtschema/schemas/reg.yaml
Fix this by reducing the address sizes for the example to 1 cell from
current 2.
Fixes: 2ce9a7299b ("dt-bindings: crypto: Add TI SA2UL crypto accelerator documentation")
Reported-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lore.kernel.org/r/20200825133106.21542-2-t-kristo@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
