Saeed Mahameed says:
====================
mlx5 fixes 2022-11-02
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2022-11-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions
net/mlx5e: E-Switch, Fix comparing termination table instance
net/mlx5e: TC, Fix wrong rejection of packet-per-second policing
net/mlx5e: Fix tc acts array not to be dependent on enum order
net/mlx5e: Fix usage of DMA sync API
net/mlx5e: Add missing sanity checks for max TX WQE size
net/mlx5: fw_reset: Don't try to load device in case PCI isn't working
net/mlx5: E-switch, Set to legacy mode if failed to change switchdev mode
net/mlx5: Allow async trigger completion execution on single CPU systems
net/mlx5: Bridge, verify LAG state when adding bond to bridge
====================
Link: https://lore.kernel.org/r/20221109184050.108379-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-11-09 (ice, iavf)
This series contains updates to ice and iavf drivers.
Norbert stops disabling VF queues that are not enabled for ice driver.
Michal stops accounting of VLAN 0 filter to match expectations of PF
driver for iavf.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: Fix VF driver counting VLAN 0 filters
ice: Fix spurious interrupt during removal of trusted VF
====================
Link: https://lore.kernel.org/r/20221110003744.201414-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
kmemleak reports memory leaks in macvlan_common_newlink, as follows:
ip link add link eth0 name .. type macvlan mode source macaddr add
<MAC-ADDR>
kmemleak reports:
unreferenced object 0xffff8880109bb140 (size 64):
comm "ip", pid 284, jiffies 4294986150 (age 430.108s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 b8 aa 5a 12 80 88 ff ff ..........Z.....
80 1b fa 0d 80 88 ff ff 1e ff ac af c7 c1 6b 6b ..............kk
backtrace:
[<ffffffff813e06a7>] kmem_cache_alloc_trace+0x1c7/0x300
[<ffffffff81b66025>] macvlan_hash_add_source+0x45/0xc0
[<ffffffff81b66a67>] macvlan_changelink_sources+0xd7/0x170
[<ffffffff81b6775c>] macvlan_common_newlink+0x38c/0x5a0
[<ffffffff81b6797e>] macvlan_newlink+0xe/0x20
[<ffffffff81d97f8f>] __rtnl_newlink+0x7af/0xa50
[<ffffffff81d98278>] rtnl_newlink+0x48/0x70
...
In the scenario where the macvlan mode is configured as 'source',
macvlan_changelink_sources() will be execured to reconfigure list of
remote source mac addresses, at the same time, if register_netdevice()
return an error, the resource generated by macvlan_changelink_sources()
is not cleaned up.
Using this patch, in the case of an error, it will execute
macvlan_flush_sources() to ensure that the resource is cleaned up.
Fixes: aa5fd0fb77 ("driver: macvlan: Destroy new macvlan port if macvlan_common_newlink failed.")
Signed-off-by: Chuang Wang <nashuiliang@gmail.com>
Link: https://lore.kernel.org/r/20221109090735.690500-1-nashuiliang@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When failed to start nic or add interrupt service routine in
s2io_card_up() for opening device, napi isn't disabled. When open
s2io device next time, it will trigger a BUG_ON()in napi_enable().
Compile tested only.
Fixes: 5f490c9680 ("S2io: Fixed synchronization between scheduling of napi with card reset and close")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109023741.131552-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit aaab73f8fb ("macsec: clear encryption keys from the stack after
setting up offload") made sure to clean encryption keys from the stack
after setting up offloading, but the atlantic driver made a copy and did
not clear it. Fix this.
[4 Fixes tags below, all part of the same series, no need to split this]
Fixes: 9ff40a751a ("net: atlantic: MACSec ingress offload implementation")
Fixes: b8f8a0b7b5 ("net: atlantic: MACSec ingress offload HW bindings")
Fixes: 27736563ce ("net: atlantic: MACSec egress offload implementation")
Fixes: 9d106c6dd8 ("net: atlantic: MACSec egress offload HW bindings")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit aaab73f8fb ("macsec: clear encryption keys from the stack after
setting up offload") made sure to clean encryption keys from the stack
after setting up offloading, but the MSCC PHY driver made a copy, kept
it in the flow data and did not clear it when freeing a flow. Fix this.
Fixes: 28c5107aa9 ("net: phy: mscc: macsec support")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The node returned by of_get_child_by_name() with refcount decremented,
of_node_put() needs be called when finish using it. So add it in the
error path in loongson_dwmac_probe() and in loongson_dwmac_remove().
Fixes: 2ae34111fe ("stmmac: dwmac-loongson: fix invalid mdio_node")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add missing pci_disable_device() in the error path in loongson_dwmac_probe().
Fixes: 30bba69d7d ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
pci_enable_msi() has been called in loongson_dwmac_probe(),
so pci_disable_msi() needs be called in remove path and error
path of probe().
Fixes: 30bba69d7d ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
VF driver mistakenly counts VLAN 0 filters, when no PF driver
counts them.
Do not count VLAN 0 filters, when VLAN_V2 is engaged.
Counting those filters in, will affect filters size by -1, when
sending batched VLAN addition message.
Fixes: 968996c070 ("iavf: Fix VLAN_V2 addition/rejection")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Previously, during removal of trusted VF when VF is down there was
number of spurious interrupt equal to number of queues on VF.
Add check if VF already has inactive queues. If VF is disabled and
has inactive rx queues then do not disable rx queues.
Add check in ice_vsi_stop_tx_ring if it's VF's vsi and if VF is
disabled.
Fixes: efe4186000 ("ice: Fix memory corruption in VF driver")
Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The pkt_reformat pointer being saved under flow_act and not
dest attribute in the termination table instance.
Fix the comparison pointers.
Also fix returning success if one pkt_reformat pointer is null
and the other is not.
Fixes: 249ccc3c95 ("net/mlx5e: Add support for offloading traffic from uplink to uplink")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In the bellow commit, we added support for PPS policing without
removing the check which block offload of such cases.
Fix it by removing this check.
Fixes: a8d52b024d ("net/mlx5e: TC, Support offloading police action")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
DMA sync functions should use the same direction that was used by DMA
mapping. Use DMA_BIDIRECTIONAL for XDP_TX from regular RQ, which reuses
the same mapping that was used for RX, and DMA_TO_DEVICE for XDP_TX from
XSK RQ and XDP_REDIRECT, which establish a new mapping in this
direction. On the RX side, use the same direction that was used when
setting up the mapping (DMA_BIDIRECTIONAL for XDP, DMA_FROM_DEVICE
otherwise).
Also don't skip sync for device when establishing a DMA_FROM_DEVICE
mapping for RX, as some architectures (ARM) may require invalidating
caches before the device can use the mapping. It doesn't break the
bugfix made in
commit 0b7cfa4082 ("net/mlx5e: Fix page DMA map/unmap attributes"),
since the bug happened on unmap.
Fixes: 0b7cfa4082 ("net/mlx5e: Fix page DMA map/unmap attributes")
Fixes: b5503b994e ("net/mlx5e: XDP TX forwarding support")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The commit cited below started using the firmware capability for the
maximum TX WQE size. This commit adds an important check to verify that
the driver doesn't attempt to exceed this capability, and also restores
another check mistakenly removed in the cited commit (a WQE must not
exceed the page size).
Fixes: c27bd1718c ("net/mlx5e: Read max WQEBBs on the SQ from firmware")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In case PCI reads fail after unload, there is no use in trying to
load the device.
Fixes: 5ec697446f ("net/mlx5: Add support for devlink reload action fw activate")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
No need to rollback to the other mode because probably will fail
again. Just set to legacy mode and clear fdb table created flag.
So that fdb table will not be cleared again.
Fixes: f019679ea5 ("net/mlx5: E-switch, Remove dependency between sriov and eswitch mode")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
For a single CPU system, the kernel thread executing mlx5_cmd_flush()
never releases the CPU but calls down_trylock(&cmd→sem) in a busy loop.
On a single processor system, this leads to a deadlock as the kernel
thread which executes mlx5_cmd_invoke() never gets scheduled. Fix this,
by adding the cond_resched() call to the loop, allow the command
completion kernel thread to execute.
Fixes: 8e715cd613 ("net/mlx5: Set command entry semaphore up once got index free")
Signed-off-by: Alexander Schmidt <alexschm@de.ibm.com>
Signed-off-by: Roy Novich <royno@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Mlx5 LAG is initialized asynchronously on a workqueue which means that for
a brief moment after setting mlx5 UL representors as lower devices of a
bond netdevice the LAG itself is not fully initialized in the driver. When
adding such bond device to a bridge mlx5 bridge code will not consider it
as offload-capable, skip creating necessary bookkeeping and fail any
further bridge offload-related commands with it (setting VLANs, offloading
FDBs, etc.). In order to make the error explicit during bridge
initialization stage implement the code that detects such condition during
NETDEV_PRECHANGEUPPER event and returns an error.
Fixes: ff9b752146 ("net/mlx5: Bridge, support LAG")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Include linux/vmalloc.h in iosm_ipc_coredump.c &
iosm_ipc_devlink.c to resolve kernel test robot errors.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Data stall seen during peak DL throughput test & packets are
dropped by mux layer due to invalid header type in datagram.
During initlization Mux aggregration protocol is set to default
UL/DL size and TD count of Mux lite protocol. This configuration
mismatch between device and driver is resulting in data stall/packet
drops.
Override the UL/DL size and TD count for Mux aggregation protocol.
Fixes: 1f52d7b622 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With INTEL_IOMMU disable config or by forcing intel_iommu=off from
grub some of the features of IOSM driver like browsing, flashing &
coredump collection is not working.
When driver calls DMA API - dma_map_single() for tx transfers. It is
resulting in dma mapping error.
Set the device DMA addressing capabilities using dma_set_mask() and
remove the INTEL_IOMMU dependency in kconfig so that driver follows
the platform config either INTEL_IOMMU enable or disable.
Fixes: f7af616c63 ("net: iosm: infrastructure")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipc_pcie_read_bios_cfg() is using the acpi_evaluate_dsm() to
obtain the wwan power state configuration from BIOS but is
not freeing the acpi_object. The acpi_evaluate_dsm() returned
acpi_object to be freed.
Free the acpi_object after use.
Fixes: 7e98d785ae ("net: iosm: entry point")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously, the default number of transmit queues was 16. Due to
resource concerns, set to 8 queues instead. Still allow the user
to set more queues (max 16) if they like.
Since the driver is virtualized away from the physical NIC, the purpose
of multiple queues is purely to allow for parallel calls to the
hypervisor. Therefore, there is no noticeable effect on performance by
reducing queue count to 8.
Fixes: d926793c1d ("ibmveth: Implement multi queue on xmit")
Reported-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Link: https://lore.kernel.org/r/20221107203215.58206-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marc Kleine-Budde says:
====================
can 2022-11-07
The first patch is by Chen Zhongjin and adds a missing
dev_remove_pack() to the AF_CAN protocol.
Zhengchao Shao's patch fixes a potential NULL pointer deref in
AF_CAN's can_rx_register().
The next patch is by Oliver Hartkopp and targets the CAN ISO-TP
protocol, and fixes the state handling for echo TX processing.
Oliver Hartkopp's patch for the j1939 protocol adds a missing
initialization of the CAN headers inside outgoing skbs.
Another patch by Oliver Hartkopp fixes an out of bounds read in the
check for invalid CAN frames in the xmit callback of virtual CAN
devices. This touches all non virtual device drivers as we decided to
rename the function requiring that netdev_priv points to a struct
can_priv.
(Note: This patch will create a merge conflict with net-next where the
pch_can driver has removed.)
The last patch is by Geert Uytterhoeven and adds the missing ECC error
checks for the channels 2-7 in the rcar_canfd driver.
* tag 'linux-can-fixes-for-6.1-20221107' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: rcar_canfd: Add missing ECC error checks for channels 2-7
can: dev: fix skb drop check
can: j1939: j1939_send_one(): fix missing CAN header initialization
can: isotp: fix tx state handling for echo tx processing
can: af_can: fix NULL pointer dereference in can_rx_register()
can: af_can: can_exit(): add missing dev_remove_pack() of canxl_packet
====================
Link: https://lore.kernel.org/r/20221107133217.59861-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current way of checking available SQE count which is based on
HW updated SQB count could result in driver submitting an SQE
even before CQE for the previously transmitted SQE at the same
index is processed in NAPI resulting losing SKB pointers,
hence a leak. Fix this by checking a consumer index which
is updated once CQE is processed.
Fixes: 3ca6c4c882 ("octeontx2-pf: Add packet transmission support")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://lore.kernel.org/r/20221107033505.2491464-1-rkannoth@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If lapb_register() failed when lapb device goes to up for the first time,
the NAPI is not disabled. As a result, the invalid opcode issue is
reported when the lapb device goes to up for the second time.
The stack info is as follows:
[ 1958.311422][T11356] kernel BUG at net/core/dev.c:6442!
[ 1958.312206][T11356] invalid opcode: 0000 [#1] PREEMPT SMP KASAN
[ 1958.315979][T11356] RIP: 0010:napi_enable+0x16a/0x1f0
[ 1958.332310][T11356] Call Trace:
[ 1958.332817][T11356] <TASK>
[ 1958.336135][T11356] lapbeth_open+0x18/0x90
[ 1958.337446][T11356] __dev_open+0x258/0x490
[ 1958.341672][T11356] __dev_change_flags+0x4d4/0x6a0
[ 1958.345325][T11356] dev_change_flags+0x93/0x160
[ 1958.346027][T11356] devinet_ioctl+0x1276/0x1bf0
[ 1958.346738][T11356] inet_ioctl+0x1c8/0x2d0
[ 1958.349638][T11356] sock_ioctl+0x5d1/0x750
[ 1958.356059][T11356] __x64_sys_ioctl+0x3ec/0x1790
[ 1958.365594][T11356] do_syscall_64+0x35/0x80
[ 1958.366239][T11356] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 1958.377381][T11356] </TASK>
Fixes: 514e1150da ("net: x25: Queue received packets in the drivers instead of per-CPU queues")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221107011445.207372-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
While BCMGENET select BROADCOM_PHY as y, but PTP_1588_CLOCK_OPTIONAL is m,
kconfig warning and build errors:
WARNING: unmet direct dependencies detected for BROADCOM_PHY
Depends on [m]: NETDEVICES [=y] && PHYLIB [=y] && PTP_1588_CLOCK_OPTIONAL [=m]
Selected by [y]:
- BCMGENET [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_BROADCOM [=y] && HAS_IOMEM [=y] && ARCH_BCM2835 [=y]
drivers/net/phy/broadcom.o: In function `bcm54xx_suspend':
broadcom.c:(.text+0x6ac): undefined reference to `bcm_ptp_stop'
drivers/net/phy/broadcom.o: In function `bcm54xx_phy_probe':
broadcom.c:(.text+0x784): undefined reference to `bcm_ptp_probe'
drivers/net/phy/broadcom.o: In function `bcm54xx_config_init':
broadcom.c:(.text+0xd4c): undefined reference to `bcm_ptp_config_init'
Fixes: 99addbe31f ("net: broadcom: Select BROADCOM_PHY for BCMGENET")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Florian Fainelli <f.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20221105090245.8508-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If CONFIG_MACSEC=m and CONFIG_OCTEONTX2_PF=y, it leads a build error:
ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_pfaf_mbox_up_handler':
otx2_pf.c:(.text+0x181c): undefined reference to `cn10k_handle_mcs_event'
ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_probe':
otx2_pf.c:(.text+0x437e): undefined reference to `cn10k_mcs_init'
ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_remove':
otx2_pf.c:(.text+0x5031): undefined reference to `cn10k_mcs_free'
ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_mbox_up_handler_mcs_intr_notify':
otx2_pf.c:(.text+0x5f11): undefined reference to `cn10k_handle_mcs_event'
Make CONFIG_OCTEONTX2_PF depends on CONFIG_MACSEC to fix it. Because
it has empty stub functions of cn10k, CONFIG_OCTEONTX2_PF can be enabled
if CONFIG_MACSEC is disabled
Fixes: c54ffc7360 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221105063442.2013981-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are two problems with meson8b_devm_clk_prepare_enable(),
introduced in commit a54dc4a490 ("net: stmmac: dwmac-meson8b:
Make the clock enabling code re-usable"):
- It doesn't pass the clk argument, but instead always the
rgmii_tx_clk of the device.
- It silently ignores the return value of devm_add_action_or_reset().
The former didn't become an actual bug until another user showed up in
the next commit 9308c47640 ("net: stmmac: dwmac-meson8b: add support
for the RX delay configuration"). The latter means the callers could
end up with the clock not actually prepared/enabled.
Fixes: a54dc4a490 ("net: stmmac: dwmac-meson8b: Make the clock enabling code re-usable")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221104083004.2212520-1-linux@rasmusvillemoes.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These WWAN network interface operations (create/delete/open/close)
are already protected by RTNL lock, i.e., wwan_ops.newlink(),
wwan_ops.dellink(), net_device_ops.ndo_open() and
net_device.ndo_stop() are called with RTNL lock held.
Therefore, this patch removes the unnecessary if_mutex.
Signed-off-by: Zhaoping Shu <zhaoping.shu@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MHI driver registers network device without setting the
needs_free_netdev flag, and does NOT call free_netdev() when
unregisters network device, which causes a memory leak.
This patch sets needs_free_netdev to true when registers
network device, which makes netdev subsystem call free_netdev()
automatically after unregister_netdevice().
Fixes: aa730a9905 ("net: wwan: Add MHI MBIM network driver")
Signed-off-by: HW He <hw.he@mediatek.com>
Signed-off-by: Zhaoping Shu <zhaoping.shu@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IOSM driver registers network device without setting the
needs_free_netdev flag, and does NOT call free_netdev() when
unregisters network device, which causes a memory leak.
This patch sets needs_free_netdev to true when registers
network device, which makes netdev subsystem call free_netdev()
automatically after unregister_netdevice().
Fixes: 2a54f2c779 ("net: iosm: net driver")
Signed-off-by: HW He <hw.he@mediatek.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Zhaoping Shu <zhaoping.shu@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When following tests are performed, it will cause dev reference counting
leakage.
a)ip link add bond2 type bond mode balance-rr
b)ip link set bond2 up
c)ifenslave -f bond2 rose1
d)ip link del bond2
When new bond device is created, the default type of the bond device is
ether. And the bond device is up, bpq_device_event() receives the message
and creates a new bpq device. In this case, the reference count value of
dev is hold once. But after "ifenslave -f bond2 rose1" command is
executed, the type of the bond device is changed to rose. When the bond
device is unregistered, bpq_device_event() will not put the dev reference
count.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
