____cacheline_aligned is an insufficient guarantee for non-coherent DMA
on platforms with 128 byte cachelines above L1. Switch to the updated
IIO_DMA_MINALIGN definition.
Fixes: be7fd3b86a ("iio:adc:ad7298 make the tx and rx buffers __be16")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220508175712.647246-13-jic23@kernel.org
____cacheline_aligned is an insufficient guarantee for non-coherent DMA
on platforms with 128 byte cachelines above L1. Switch to the updated
IIO_DMA_MINALIGN definition.
Fixes: 506d2e317a ("iio: adc: Add driver support for AD7292")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220508175712.647246-12-jic23@kernel.org
____cacheline_aligned is an insufficient guarantee for non-coherent DMA
on platforms with 128 byte cachelines above L1. Switch to the updated
IIO_DMA_MINALIGN definition.
Fixes: 003f1d48de ("staging:iio:adc:ad7280a: Split buff[2] into tx and rx parts")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220508175712.647246-11-jic23@kernel.org
____cacheline_aligned is an insufficient guarantee for non-coherent DMA
on platforms with 128 byte cachelines above L1. Switch to the updated
IIO_DMA_MINALIGN definition.
Update the comment to reflect that DMA safety 'may' require separate
cachelines.
Fixes: 54e018da31 ("iio:ad7266: Mark transfer buffer as __be16")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220508175712.647246-10-jic23@kernel.org
Discussion of the series:
https://lore.kernel.org/all/20220405135758.774016-1-catalin.marinas@arm.com/
mm, arm64: Reduce ARCH_KMALLOC_MINALIGN brought to my attention that
our current IIO usage of L1CACHE_ALIGN is insufficient as their are Arm
platforms out their with non coherent DMA and larger cache lines at
at higher levels of their cache hierarchy.
Rename the define to make it's purpose more explicit. It will be used
much more widely going forwards (to replace incorrect ____cacheline_aligned
markings.
Note this patch will greatly reduce the padding on some architectures
that have smaller requirements for DMA safe buffers.
The history of changing values of ARCH_KMALLOC_MINALIGN via
ARCH_DMA_MINALIGN on arm64 is rather complex. I'm not tagging this
as fixing a particular patch from that route as it's not clear what to tag.
Most recently a change to bring them back inline was reverted because
of some Qualcomm Kryo cores with an L2 cache with 128-byte lines
sitting above the point of coherency.
c1132702c7 Revert "arm64: cache: Lower ARCH_DMA_MINALIGN to 64 (L1_CACHE_BYTES)"
That reverts:
65688d2a05 arm64: cache: Lower ARCH_DMA_MINALIGN to 64 (L1_CACHE_BYTES) which
refers to the change originally being motivated by Thunder x1 performance
rather than correctness.
Fixes: 6f7c8ee585 ("staging:iio: Add ability to allocate private data space to iio_allocate_device")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220508175712.647246-2-jic23@kernel.org
Avoid unnecessary pollution of the global symbol namespace by
moving library functions in to a specific namespace and import
that into the drivers that make use of the functions.
For more info: https://lwn.net/Articles/760045/
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220220173701.502331-5-jic23@kernel.org
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.
Add mod_devicetable.h include.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220531213922.72992-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the ->probe_new() callback.
The driver does not use const struct i2c_device_id * argument,
so convert it to utilise the simplified I²C driver registration.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220531213922.72992-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.
Add mod_devicetable.h include.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220531142353.64925-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There is nothing directly using of specific interfaces in this driver,
so lets not include the headers.
While at it, drop dependency to OF, which currently makes no sense.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220531212218.72189-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Nothing in this driver depends on OF so drop the dependency
to remove the false impression such a dependency exists.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220530181313.2789-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Nothing in this driver depends on OF so drop the dependency
to remove the false impression such a dependency exists.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220530181706.3045-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Returning an error value in an i2c remove callback results in a generic
error message being emitted by the i2c core, but otherwise it doesn't
make a difference. The device goes away anyhow and the devm cleanups are
called.
So instead of triggering the generic i2c error message, emit a more
helpful message if a problem occurs and return 0 to suppress the generic
message.
This patch is a preparation for making i2c remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220515155929.338656-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Returning an error value in an i2c remove callback results in a generic
error message being emitted by the i2c core, but otherwise it doesn't
make a difference. The device goes away anyhow and the devm cleanups are
called.
So instead of triggering the generic i2c error message, emit a more
helpful message if a problem occurs and return 0 to suppress the generic
message.
This patch is a preparation for making i2c remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220515155929.338656-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove unnecessary channel check from rzg2l_adc_read_label(), as the
channel error handling is already done in probe(). Therefore no need to
validate at runtime.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220515060337.16513-3-biju.das.jz@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This driver doesn't need to access I/O ports directly via inb()/outb()
and friends. This patch abstracts such access by calling ioport_map()
to enable the use of more typical ioread8()/iowrite8() I/O memory
accessor calls.
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/64673797df382c52fc32fce24348b25a0b05e73a.1652201921.git.william.gray@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Here is the large set of char, misc, and other driver subsystem updates
for 5.19-rc1. The merge request for this has been delayed as I wanted
to get lots of linux-next testing due to some late arrivals of changes
for the habannalabs driver.
Highlights of this merge are:
- habanalabs driver updates for new hardware types and fixes and
other updates
- IIO driver tree merge which includes loads of new IIO drivers
and cleanups and additions
- PHY driver tree merge with new drivers and small updates to
existing ones
- interconnect driver tree merge with fixes and updates
- soundwire driver tree merge with some small fixes
- coresight driver tree merge with small fixes and updates
- mhi bus driver tree merge with lots of updates and new device
support
- firmware driver updates
- fpga driver updates
- lkdtm driver updates (with a merge conflict, more on that
below)
- extcon driver tree merge with small updates
- lots of other tiny driver updates and fixes and cleanups, full
details in the shortlog.
All of these have been in linux-next for almost 2 weeks with no reported
problems.
Note, there are 3 merge conflicts when merging this with your tree:
- MAINTAINERS, should be easy to resolve
- drivers/slimbus/qcom-ctrl.c, should be straightforward
resolution
- drivers/misc/lkdtm/stackleak.c, not an easy resolution. This
has been noted in the linux-next tree for a while, and
resolved there, here's a link to the resolution that Stephen
came up with and that Kees says is correct:
https://lore.kernel.org/r/20220509185344.3fe1a354@canb.auug.org.au
I will be glad to provide a merge point that contains these resolutions
if that makes things any easier for you.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnkbA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylOrgCggbbAFwESBY9o2YfpG+2VOLpc0GAAoJgY1XN8
P/gumbLEpFvoBZ5xLIW8
=KCgk
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / other smaller driver subsystem updates from Greg KH:
"Here is the large set of char, misc, and other driver subsystem
updates for 5.19-rc1. The merge request for this has been delayed as I
wanted to get lots of linux-next testing due to some late arrivals of
changes for the habannalabs driver.
Highlights of this merge are:
- habanalabs driver updates for new hardware types and fixes and
other updates
- IIO driver tree merge which includes loads of new IIO drivers and
cleanups and additions
- PHY driver tree merge with new drivers and small updates to
existing ones
- interconnect driver tree merge with fixes and updates
- soundwire driver tree merge with some small fixes
- coresight driver tree merge with small fixes and updates
- mhi bus driver tree merge with lots of updates and new device
support
- firmware driver updates
- fpga driver updates
- lkdtm driver updates (with a merge conflict, more on that below)
- extcon driver tree merge with small updates
- lots of other tiny driver updates and fixes and cleanups, full
details in the shortlog.
All of these have been in linux-next for almost 2 weeks with no
reported problems"
* tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (387 commits)
habanalabs: use separate structure info for each error collect data
habanalabs: fix missing handle shift during mmap
habanalabs: remove hdev from hl_ctx_get args
habanalabs: do MMU prefetch as deferred work
habanalabs: order memory manager messages
habanalabs: return -EFAULT on copy_to_user error
habanalabs: use NULL for eventfd
habanalabs: update firmware header
habanalabs: add support for notification via eventfd
habanalabs: add topic to memory manager buffer
habanalabs: handle race in driver fini
habanalabs: add device memory scrub ability through debugfs
habanalabs: use unified memory manager for CB flow
habanalabs: unified memory manager new code for CB flow
habanalabs/gaudi: set arbitration timeout to a high value
habanalabs: add put by handle method to memory manager
habanalabs: hide memory manager page shift
habanalabs: Add separate poll interval value for protocol
habanalabs: use get_task_pid() to take PID
habanalabs: add prefetch flag to the MAP operation
...
Usual mixed bag. Stand out this time is Andy Shevchenko's continuing
effort to move drivers over the generic firmware interfaces.
Device support
* sprd,sc2720
- upm9620 binding addition.
- Refactor and support for sc2720, sc2721 and sc2730.
* ti,ads1015
- Refactor driver and add support for TLA2024.
Device support (IDs only)
* invensense,mpu6050
- Add ID for ICM-20608-D.
* st,accel:
- Add ID for lis302dl.
* st,lsm6dsx
- Add support for ASM330LHHX (can fallback to LSM6DSR.)
Features
* convert drivers to device properties
- IIO core
- adi,ad7266
- adi,adis16480
- adi,adxl355
- bosch,bmi160
- domintech,dmard06
- fsl,fxas21002c
- invensense,mpu3050
- linear,ltc2983
- linear,ltc2632
- maxbotix,mb1232
- maxim,max31856
- maxim,max31865
- multiplexer
- ping
- rescale
- taos,tsl2772
* core
- Add runtime check on whether realbits fit in storagebits for each
channel.
* adi,ad_sigma_delta
- Add sequencer support and relevant update_scan_mode callbacks for
adi,ad7192 and adi,ad7124.
Cleanup and minor fixes
* MAINTAINERS
- Update Lorenzo Bianconi's email address for IIO drivers.
- Add entry for ad3552r and update maintainer in dt-binding doc.
* tree-wide
- Replace strtobool() with kstrtobool().
- Drop false OF dependencies.
* core
- Tidy up and document IIO modes.
- Take iio_buffer_enabled() out of header allowing current_mode to be
moved to the opaque structure.
- As all kfifo buffers use the same mode value, drop that parameter
and set it unconditionally.
- White space fixes and similar.
- Drop use of list iterator variable for
list_for_each_entry_continue_reverse and use list_prepare_entry to
restart.
* sysfs-trigger
- Replace use of 'found' variable with dedicate list iterator variable.
* adi,ad7124
- Drop misleading shift.
* adi,ad2s1210
- Remove redundant local variable assignment.
* adi,adis16480
- Use local device pointer to reduce repetition.
- Improve handling of clocks.
* domintech,dmard09
- White space.
* dummy driver
- Improve error handling.
* fsl,mma8452
- Add missing documentation of name element.
* invensense,mpu3050
- Stop remove() returning non 0.
* kionix,kxsd9
- White space.
* linear,ltc2688
- Use local variable for struct device.
- Combine of_node_put() error handling paths.
* linear,ltc2983
- Avoid use of constants in messages where a define is available.
* microchip,mcp4131
- Fix compatible in dt example.
* pni,rm3100
- Stop directly accessing iio_dev->current_mode just to find out
if the buffer is enabled.
* renesas,rzg2l
- Relax kconfig constraint to include newer devices.
* sprd,sc27xx
- Fix wrong scaling mask.
- Improve the calibration values.
* samsung,ssp
- Replace a 'found' variable in favor of an explicit value that was
found.
* sensortek,stk3xx
- Add proximity-near-level binding and driver support.
* st,st_sensors:
- Drop unused accel_type enum.
- Return early in *_write_raw()
- Drop unnecessary locking in _avail functions.
- Add local lock to protect odr against concurrent updates allowing
mlock to no longer be used outside of the core.
- Use iio_device_claim_direct_mode() rather than racy checking of
the current mode.
* st,stmpe-adc
- Fix checks on wait_for_completion_timeout().
- Allow use of of_device_id for matching.
* st,stm32-dfsdm
- Stop accessing iio_dev->current_mode to find out if the buffer
is enabled (so we can hide that variable in the opaque structure)
* st,vl53l0x
- Fix checks on wait_for_completion_timeout.
* ti,ads1015
- Add missing ID for ti,ads1115 in binding doc.
- Convert from repeated chip ID look up to selecting static const
data.
- Switch to read_avail() callback.
* ti,ads8688
- Use of_device_id for driver matching.
* ti,palmas-adc
- Drop a warning on minor calibration mismatch leading to slightly
negative values after applying the calibration.
-----BEGIN PGP SIGNATURE-----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=wZYX
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
First set of IIO new device support, features and cleanup for 5.19
Usual mixed bag. Stand out this time is Andy Shevchenko's continuing
effort to move drivers over the generic firmware interfaces.
Device support
* sprd,sc2720
- upm9620 binding addition.
- Refactor and support for sc2720, sc2721 and sc2730.
* ti,ads1015
- Refactor driver and add support for TLA2024.
Device support (IDs only)
* invensense,mpu6050
- Add ID for ICM-20608-D.
* st,accel:
- Add ID for lis302dl.
* st,lsm6dsx
- Add support for ASM330LHHX (can fallback to LSM6DSR.)
Features
* convert drivers to device properties
- IIO core
- adi,ad7266
- adi,adis16480
- adi,adxl355
- bosch,bmi160
- domintech,dmard06
- fsl,fxas21002c
- invensense,mpu3050
- linear,ltc2983
- linear,ltc2632
- maxbotix,mb1232
- maxim,max31856
- maxim,max31865
- multiplexer
- ping
- rescale
- taos,tsl2772
* core
- Add runtime check on whether realbits fit in storagebits for each
channel.
* adi,ad_sigma_delta
- Add sequencer support and relevant update_scan_mode callbacks for
adi,ad7192 and adi,ad7124.
Cleanup and minor fixes
* MAINTAINERS
- Update Lorenzo Bianconi's email address for IIO drivers.
- Add entry for ad3552r and update maintainer in dt-binding doc.
* tree-wide
- Replace strtobool() with kstrtobool().
- Drop false OF dependencies.
* core
- Tidy up and document IIO modes.
- Take iio_buffer_enabled() out of header allowing current_mode to be
moved to the opaque structure.
- As all kfifo buffers use the same mode value, drop that parameter
and set it unconditionally.
- White space fixes and similar.
- Drop use of list iterator variable for
list_for_each_entry_continue_reverse and use list_prepare_entry to
restart.
* sysfs-trigger
- Replace use of 'found' variable with dedicate list iterator variable.
* adi,ad7124
- Drop misleading shift.
* adi,ad2s1210
- Remove redundant local variable assignment.
* adi,adis16480
- Use local device pointer to reduce repetition.
- Improve handling of clocks.
* domintech,dmard09
- White space.
* dummy driver
- Improve error handling.
* fsl,mma8452
- Add missing documentation of name element.
* invensense,mpu3050
- Stop remove() returning non 0.
* kionix,kxsd9
- White space.
* linear,ltc2688
- Use local variable for struct device.
- Combine of_node_put() error handling paths.
* linear,ltc2983
- Avoid use of constants in messages where a define is available.
* microchip,mcp4131
- Fix compatible in dt example.
* pni,rm3100
- Stop directly accessing iio_dev->current_mode just to find out
if the buffer is enabled.
* renesas,rzg2l
- Relax kconfig constraint to include newer devices.
* sprd,sc27xx
- Fix wrong scaling mask.
- Improve the calibration values.
* samsung,ssp
- Replace a 'found' variable in favor of an explicit value that was
found.
* sensortek,stk3xx
- Add proximity-near-level binding and driver support.
* st,st_sensors:
- Drop unused accel_type enum.
- Return early in *_write_raw()
- Drop unnecessary locking in _avail functions.
- Add local lock to protect odr against concurrent updates allowing
mlock to no longer be used outside of the core.
- Use iio_device_claim_direct_mode() rather than racy checking of
the current mode.
* st,stmpe-adc
- Fix checks on wait_for_completion_timeout().
- Allow use of of_device_id for matching.
* st,stm32-dfsdm
- Stop accessing iio_dev->current_mode to find out if the buffer
is enabled (so we can hide that variable in the opaque structure)
* st,vl53l0x
- Fix checks on wait_for_completion_timeout.
* ti,ads1015
- Add missing ID for ti,ads1115 in binding doc.
- Convert from repeated chip ID look up to selecting static const
data.
- Switch to read_avail() callback.
* ti,ads8688
- Use of_device_id for driver matching.
* ti,palmas-adc
- Drop a warning on minor calibration mismatch leading to slightly
negative values after applying the calibration.
* tag 'iio-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (95 commits)
iio: ti-ads8688: use of_device_id for OF matching
iio: stmpe-adc: use of_device_id for OF matching
dt-bindings: iio: Fix incorrect compatible strings in examples
iio: gyro: mpu3050: Make mpu3050_common_remove() return void
iio: dac: ltc2632: Make use of device properties
iio: temperature: max31865: Make use of device properties
iio: proximity: mb1232: Switch to use fwnode_irq_get()
iio: imu: adis16480: Improve getting the optional clocks
iio: imu: adis16480: Use temporary variable for struct device
iio: imu: adis16480: Make use of device properties
staging: iio: ad2s1210: remove redundant assignment to variable negative
iio: adc: sc27xx: add support for PMIC sc2730
iio: adc: sc27xx: add support for PMIC sc2720 and sc2721
iio: adc: sc27xx: refactor some functions for support more PMiCs
iio: adc: sc27xx: structure adjustment and optimization
iio: adc: sc27xx: Fine tune the scale calibration values
iio: adc: sc27xx: fix read big scale voltage not right
dt-bindings:iio:adc: add sprd,ump9620-adc dt-binding
iio: proximity: stk3310: Export near level property for proximity sensor
dt-bindings: iio: light: stk33xx: Add proximity-near-level
...
Add reverse scaling function for PMIC5 Gen2 ADC_TM, to convert
temperature to raw ADC code, for setting thresholds for
thermistor channels.
Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/1648991869-20899-3-git-send-email-quic_jprakash@quicinc.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Return irq instead of ret which always equals to zero here.
Fixes: d5c70627a7 ("iio: adc: Add Xilinx AMS driver")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Since commit 9bcf15f75c ("iio: adc: axp288: Fix TS-pin handling") we
preserve the bias current set by the firmware at boot. This fixes issues
we were seeing on various models.
Some models like the Nuvision Solo 10 Draw tablet actually need the
old hardcoded 80ųA bias current for battery temperature monitoring
to work properly.
Add a quirk entry for the Nuvision Solo 10 Draw to the DMI quirk table
to restore setting the bias current to 80ųA on this model.
Fixes: 9bcf15f75c ("iio: adc: axp288: Fix TS-pin handling")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215882
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220506095040.21008-1-hdegoede@redhat.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The of_device_id was added to allow module autoloading, but it should be
also used to allow driver matching via Devicetree.
This also fixes W=1 warning:
drivers/iio/adc/ti-ads8688.c:501:34: error: ‘ads8688_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220501103447.111392-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The of_device_id was added to allow module autoloading, but it should be
also used to allow driver matching via Devicetree.
This also fixes W=1 warning:
drivers/iio/adc/stmpe-adc.c:357:34: error: ‘stmpe_adc_ids’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220501103447.111392-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Refactor the common adc_nvmem_cell_calib_data,adc_to_volt and call
these in the origin sc27xx_adc_scale_calibration,sc27xx_adc_to_volt
Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>
Link: https://lore.kernel.org/r/20220419142458.884933-6-gengcixi@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce one variant device data structure to be compatible
with SC2731 PMIC since it has different scale and ratio calculation
and so on. also rename the SC27xx to SC2731 for some definition
and function.
Co-developed-by: Yuming Zhu <yuming.zhu1@unisoc.com>
Signed-off-by: Yuming Zhu <yuming.zhu1@unisoc.com>
Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>
Link: https://lore.kernel.org/r/20220419142458.884933-5-gengcixi@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Small adjustment the scale calibration value for the sc2731,
use new name sc2731_[big|small]_scale_graph_calib, and remove
the origin [big|small]_scale_graph_calib struct for unused.
Fixes: 8ba0dbfd07 (iio: adc: sc27xx: Add ADC scale calibration)
Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>
Link: https://lore.kernel.org/r/20220419142458.884933-4-gengcixi@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
wait_for_completion_timeout() returns unsigned long not long.
it returns 0 if timed out, and positive if completed.
The check for <= 0 is ambiguous and should be == 0 here
indicating timeout which is the only error case
Fixes: e813dde6f8 ("iio: stmpe-adc: Use wait_for_completion_timeout")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com>
Link: https://lore.kernel.org/r/20220412065150.14486-1-linmq006@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ADC block is common on Renesas RZ/G2L and RZ/V2L SoC's, so instead of
adding dependency for each SoC's add dependency on ARCH_RZG2L. The
ARCH_RZG2L config option is already selected by ARCH_R9A07G044 and
ARCH_R9A07G054.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220406070315.13862-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Convert probe functions to device-managed variants, with exception of
the regulator, which required a devm_add_action_or_reset() hook
registration.
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Maíra Canal <maira.canal@usp.br>
Link: https://lore.kernel.org/r/20220407115621.10781-1-maira.canal@usp.br
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
strtobool() is deprecated and just a wrapper around kstrtobool().Replace
it with kstrtobool() so the deprecated function can be removed eventually.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220409105812.2113895-1-lars@metafoo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Among all the users of the kfifo buffers, no one uses the
INDIO_BUFFER_HARDWARE mode. So let's take this as a general rule and
simplify a little bit the internals - overall the documentation - by
eliminating unused specific cases. Use the INDIO_BUFFER_SOFTWARE mode by
default with kfifo buffers, which will basically mimic what all the "non
direct" modes do.
Cc: Benson Leung <bleung@chromium.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jyoti Bhayana <jbhayana@google.com>
Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220207143840.707510-13-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In order to later move this variable within the opaque structure, let's
create a helper for accessing it in read-only mode. This helper will be
exposed to device drivers and kept accessible for the few that could need
it. The write access to this variable however should be fully reserved to
the core so in a second step we will hide this variable into the opaque
structure.
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220207143840.707510-11-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This is an internal variable of the core, let's use the
iio_buffer_enabled() helper which is exported for the following purpose:
telling if the current mode is a buffered mode, which is precisely what
this driver looks for.
Cc: Olivier Moysan <olivier.moysan@foss.st.com>
Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20220207143840.707510-4-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Name of variable change missed in refactoring patch.
Fixes: 112bf4aa4a ("staging:iio:adc:ad7280a: Switch to standard event control")
Reported-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://lore.kernel.org/r/20220226175604.662422-1-jic23@kernel.org
Replace sysfs attributes with read_avail() callback. This also permits
removal of ads1115_info, since the scale attribute tables are now part
of chip data.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20220328194725.149150-10-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Instead of storing only data_rate in private data, store pointer to the
whole chip data and use the data_rate from chip data throughout the driver.
No functional change. This is done in preparation for switching to
read_avail().
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220328194725.149150-9-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace chip type enumeration in match data with pointer to static constant
structure which contains all the different chip properties in one place, and
then replace handling of chip type in probe() with simple copy of fields in
the new match data structure into struct iio_dev.
This reduces code and increases static data.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220328194725.149150-8-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add compile-time static_assert wrapper to verify that shifted realbits
fit into storagebits. The macro is implemented in a more generic way so
it can be used to verify other values if required.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220328194725.149150-7-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for TI TLA2024 ADC. This chip is compatible with ADS1015
except it has no comparator in it, hence the comparator configuration
bits are missing in Configuration Register and the Hi_Thresh/Lo_Thresh
registers are missing as well and so is event support.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220328194725.149150-6-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Pass event_spec and num_event_specs to ADS1015_V_CHAN and ADS1015_V_DIFF_CHAN
macros, to make it possible to pass no event_spec at all for chips which have
no comparator and thus no events. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220328194725.149150-5-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
These macros differ only in the number of valid bits of each ADC sample
and the shift of those bits, i.e. ADS1015 is 12bit ADC shifted by 4 left,
ADS1115 is 16bit ADC shifted by 0. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220328194725.149150-4-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Switch the driver from code implementing test whether a regmap register
is writeable to static const tables describing the test. No functional
change.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220328194725.149150-3-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Although technically checking for ADC values below 0 is correct,
because they are outside of the calibration values, there is usually
noise which spuriously fills the console log with error messages if
calculated input voltage gets close to 0V.
Ignore small negative calculated values, but clamp them to 0.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/1cee45bfc3fa2ab59dcc17242fb52468035360a1.1646743982.git.hns@goldelico.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Some sigma-delta chips support sampling of multiple
channels in continuous mode.
When the operating with more than one channel enabled,
the channel sequencer cycles through the enabled channels
in sequential order, from first channel to the last one.
If a channel is disabled, it is skipped by the sequencer.
If more than one channel is used in continuous mode,
instruct the device to append the status to the SPI transfer
(1 extra byte) every time we receive a sample.
All sigma-delta chips possessing a sampling sequencer have
this ability. Inside the status register there will be
the number of the converted channel. In this way, even
if the CPU won't keep up with the sampling rate, it won't
send to userspace wrong channel samples.
When multiple channels are enabled in continuous mode,
the device needs to perform a measurement on all slots
before we can push to userspace the sample.
If, during sequencing and data reading, a channel measurement
is lost, a desync occurred. In this case, ad_sigma_delta drops
the incomplete sample and waits for the device to send the
measurement on the first active slot.
Co-developed-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20220322105029.86389-5-alexandru.tachici@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The callback .set_channel cannot be used to enable multiple
channels at once, only one is allowed simultaneously.
By adding an update_scan_mode callback, every time the
continuous mode is activated, channels will be enabled/disabled
accordingly.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Link: https://lore.kernel.org/r/20220322105029.86389-4-alexandru.tachici@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The callback .set_channel cannot be used to enable and
disable multiple channels at once as they are presented
in the active_scan_mask.
By adding an update_scan_mode callback, every time the
continuous mode is activated, channels will be
enabled/disabled accordingly.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Link: https://lore.kernel.org/r/20220322105029.86389-3-alexandru.tachici@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The 24 bits data is stored in 32 bits in BE. There
is no need to shift it. This confuses user-space apps.
Fixes: b3af341bbd ("iio: adc: Add ad7124 support")
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Link: https://lore.kernel.org/r/20220322105029.86389-2-alexandru.tachici@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
There will be two merge conflicts with your tree, one in MAINTAINERS
which is obvious to fix up, and one in drivers/phy/freescale/Kconfig
which also should be easy to resolve.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG3fQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykNEgCfaRG8CRxewDXOO4+GSeA3NGK+AIoAnR89donC
R4bgCjfg8BWIBcVVXg3/
=WWXC
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
firmware: google: Properly state IOMEM dependency
kgdbts: fix return value of __setup handler
firmware: sysfb: fix platform-device leak in error path
firmware: stratix10-svc: add missing callback parameter on RSU
arm64: dts: qcom: add non-secure domain property to fastrpc nodes
misc: fastrpc: Add dma handle implementation
misc: fastrpc: Add fdlist implementation
misc: fastrpc: Add helper function to get list and page
misc: fastrpc: Add support to secure memory map
dt-bindings: misc: add fastrpc domain vmid property
misc: fastrpc: check before loading process to the DSP
misc: fastrpc: add secure domain support
dt-bindings: misc: add property to support non-secure DSP
misc: fastrpc: Add support to get DSP capabilities
misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
misc: fastrpc: separate fastrpc device from channel context
dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
dt-bindings: nvmem: make "reg" property optional
nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
nvmem: dt-bindings: Fix the error of dt-bindings check
...
The overwhelming bulk of this pull request is a change from Uwe
Kleine-König which changes the return type of the remove() function to
void as part of some wider work he's doing to do this for all bus types,
causing updates to most SPI device drivers. The branch with that on has
been cross merged with a couple of other trees which added new SPI
drivers this cycle, I'm not expecting any build issues resulting from
the change.
Otherwise it's been a relatively quiet release with some new device
support, a few minor features and the welcome completion of the
conversion of the subsystem to use GPIO descriptors rather than numbers:
- Change return type of remove() to void.
- Completion of the conversion of SPI controller drivers to use GPIO
descriptors rather than numbers.
- Quite a few DT schema conversions.
- Support for multiple SPI devices on a bus in ACPI systems.
- Big overhaul of the PXA2xx SPI driver.
- Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
Sunplus SP7021.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmI4b+8ACgkQJNaLcl1U
h9AB+Qf/WhPzDSCdhK1repnSmEpRNs/J6hItmY2H6pTQaWALpfTB0+p1Nb5tAotg
fHbu6a2AsiiwWt+tDal44GFYhS0CDSOT4hqgLV8msyDDPPJqqr7A2dbu7YrCjTVI
TgNZNwxW7c2LgqBXR9GV7NPWYoxYxveoYh+L+05MSuSQxSOvPl6LUZiZPnPufQM6
dCpEh19atrtasFg3rFnslWBd2C3h8hb6YT7vUZs9gxhg3FvSgpYQwzz5SfFgHXK6
Rg07m8fDTSjf2qo1C4pc/d1Ni1xBe7aHKMtjtR3jJ4q8QqiawfCcvvOep/Iaec1+
s3qnDthohWMJoF1W6ERf3HiAgNIfhg==
=4tlR
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The overwhelming bulk of this pull request is a change from Uwe
Kleine-König which changes the return type of the remove() function to
void as part of some wider work he's doing to do this for all bus
types, causing updates to most SPI device drivers. The branch with
that on has been cross merged with a couple of other trees which added
new SPI drivers this cycle, I'm not expecting any build issues
resulting from the change.
Otherwise it's been a relatively quiet release with some new device
support, a few minor features and the welcome completion of the
conversion of the subsystem to use GPIO descriptors rather than
numbers:
- Change return type of remove() to void.
- Completion of the conversion of SPI controller drivers to use GPIO
descriptors rather than numbers.
- Quite a few DT schema conversions.
- Support for multiple SPI devices on a bus in ACPI systems.
- Big overhaul of the PXA2xx SPI driver.
- Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
Sunplus SP7021"
[ And this is obviously where that spi change that snuck into the
regulator tree _should_ have been :^]
* tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits)
spi: fsi: Implement a timeout for polling status
spi: Fix erroneous sgs value with min_t()
spi: tegra20: Use of_device_get_match_data()
spi: mediatek: add ipm design support for MT7986
spi: Add compatible for MT7986
spi: sun4i: fix typos in comments
spi: mediatek: support tick_delay without enhance_timing
spi: Update clock-names property for arm pl022
spi: rockchip-sfc: fix platform_get_irq.cocci warning
spi: s3c64xx: Add spi port configuration for Tesla FSD SoC
spi: dt-bindings: samsung: Add fsd spi compatible
spi: topcliff-pch: Prevent usage of potentially stale DMA device
spi: tegra210-quad: combined sequence mode
spi: tegra210-quad: add acpi support
spi: npcm-fiu: Fix typo ("npxm")
spi: Fix Tegra QSPI example
spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ
spi: cadence: fix platform_get_irq.cocci warning
spi: Update NXP Flexspi maintainer details
dt-bindings: mfd: maxim,max77802: Convert to dtschema
...
This cycle we had quite a few series that applied similar changes
to lots of drivers. To keep this description manageable I have
called those out in their own section rather than per driver.
Particularly pleased to see the long running AFE precision series
going in this cycle.
Series includes some late breaking fixes.
New device support
* adi,ada4250 amplifier
- New driver and dt bindings for this programmable gain amplifier.
* adi,admv1014 microwave down-converter
- New driver, dt bindings and some device specific ABI that
may be generalized as more drivers for devices similar to this
are added.
* adi,admv4420 K Band down-converter.
- New driver and dt bindings.
* adi,adxl367 accelerometer driver.
- New driver, dt-bindings + some new IIO ABI definitions to support
reference magnitude events where an estimate of the acceleration
due to gravity has been removed.
- A few fixes as follow up patches.
* adi,ltc2688 DAC with toggle and dither modes.
- New driver and bindings. Includes some new driver specific (for now)
ABI for handling toggle mode and the addition of a dither waveform to
the DAC output.
* AFE (analog front end) add support for additional types of analog device
in front of an ADC.
- RTD temperature sensors with dt bindings.
- Temperature transducers wit dt bindings.
- Related cleanup and features listed in other sections below.
* maxim,ds3502 potentiometer.
- Add support to ds1803 driver which required significant rework.
* mediatek,mt2701-auxadc driver
- Add mediatek,mt8186-auxadc - id table and chip specific info only.
* semtech,sx9324, semtech,ax9360
- Substantial refactoring of sx9310 to extract core logic for reuse
into a separate module
- New driver using this supporting sx9324 proximity sensors.
- New driver using this supporting sx9360 proximity sensors.
* silan,sc7a20
- Compatible with the st,lis2dh (or nearly anyway) so add ID and
chip specific info to enable support. Also silan vendor ID added
for dt-bindings.
Staging graduation
* adi,ad7280a monitoring ADC for stacked lithium-ion batteries in
electric cars and similar.
- Substantial rework of driver required to bring inline with current
IIO best practice. An unusual device in IIO so some interesting features
we may see more of in future.
Multiple driver/core cleanup
- Use sysfs_emit() in simple locations where there is no path to change
to various core created attributes.
- Trivial white space fixes around inconsistency between space after { and
before } in id tables.
- Introduce new handling for fractional types to avoid repeated similar
implementations. Use this in 3 drivers. Note this is also targeted
at future use in the AFE driver and was motivated by discussions
around the precision related work on that driver.
- of related header cleanups - drop of*.h and add mod_devicetable.h as
appropriate.
- Move a number of symbol exports into IIO_* namespaces. Two categories,
1) Library used by multiple drivers e.g. st_sensors
2) Core driver module exporting functions used by bus specific modules.
A few related cleanups in this set.
- Switch from CONFIG_PM_* guards to new DEFINE_SIMPLE_DEV_PM_OPS() and
similar to simplify drivers and take advantage of these new macros
allowing the compiler to do the job or removing unused code without
the need for __maybe_unused markings. Conversion of other drivers to
these new macros ongoing.
Features
* adi,adf4350
- Switch from of specific to generic device properties enabling use with
other firmware types.
* adi,adx345
- Switch from of specific to generic device properties.
- Add ACPI ID ADS0345
- Related driver cleanup.
* adi,hmc425a
- Switch from of specific to generic device properties.
* afe analog rescaler driver
- Wider range of types supported for scale.
- Support offset.
- Kunit tests.
* atlas,ezo-sensor
- Convert from of to device properties.
* fsl,mma8452
- Support mount matrix.
* infineon,dps310:
- Add ACPI ID IFX3100.
* invensense,mpu6050
- Convert to generic device properties.
* maxim,ds1803
- Add out_raw_available before supporting more devices.
- Convert from of specific to device properties.
* samsung,ssp_sensors
- Convert from of specific to device properties.
* st,stm32-timer trigger
- Convert from of specific to device properties.
* ti,hdc101x
- Add ACPI ID TXNW1010.
* ti,tsc2046:
- Add read_raw support to enable use of iio_hwmon and similar.
Fixes / cleanup.
* mailmap
- Update for Cai Huoqing
* MAINTAINERS
- Fix Analog Devices related links.
- Add entry for ADRF6780
- Add entry for ADMV1013
- Add entry for AD7293
- Add entry for ADMV8818
- Update files listed for adis-lib
* iio core:
- Fix wrong comment about current_mode being something a driver should
ever access.
- Use struct_size() rather than open coding in industrialio-hw-consumer
* adi,axl355
- Use units.h definitions instead of local versions.
* adi,adis-lib
- Simplify *updated_bits() macro
- Whitespace cleanup.
* afe - Note many of these fixes only apply to particular configurations
so the problems have probably not been seen in the wild, but will be
visible with new usecases enabled this cycle.
- Fix application of consumer scale for IIO_VAL_INT.
- Apply a scale of 1 when no scale is provided.
- Make best effort to establish a valid offset value for fractional
cases.
- Use s64 for scale calculations where parameters may be signed.
- Tidy up include order.
- Improve accuracy for small fractional sales
- Reduce risk of integer overflow.
* ams,as3935
- Use devm_delayed_work_autocancel() to replace open coded equivalent.
* aspeed,adc
- Fix wrong use of divider flag.
* atmel,sama5d2-adc
- Relax atmel,trigger-edge-type to optional.
- Drop Ludovic Desroches from listed maintainers of the dt-binding
inline with previous MAINTAINERS entry update.
* fsl,mma8452
- Fix probing when i2c_device_id used.
- dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev.
Use dev_to_iio_dev() instead. Note the original path in here
worked more by luck than design.
* invensense,mpu6050
- Drop ACPI_PTR() protection to avoid an unused warning.
- Use fact ACPI_COMPANION() returns null when ACPI_HANDLE() does to
simplify handling.
* motorola,cpcap-adc
- Drop unused assignment.
* qcom,spmi-adc
- Fix wrong example of 'reg' in binding document.
* renesas,rzg2l-adc
- Trivial typo fix.
* semtech,sx9360
- Fix wrong register handling for event generation.
* st_sensors
- Allow manual disabling of I2C or SPI module if not needed for a particular
board. Default is still to enable the bus specific module if
appropriate bus is supported.
* st,lsm6dsx
- dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev.
Use dev_to_iio_dev() instead.
* ti,palmas-gpadc
- Split the interrupt fields in the dt-binding example
* ti,tsc2046
- Rework state machine to improve readability after recent debugging of
an issue fixed elsewhere.
- Add a sanity check to avoid very large memory allocations if a crazy
delay is specified.
* ti,twl6030
- Add error handling if devm_request_threaded_irq() fails.
* xilinx,ams
- Use devm_delayed_work_autocancel() instead of open coding equivalent.
- Fix missing required clock entry in dt-binding.
- Fix miss counting of channels resulting in ps channels not
being enabled.
- Fix incorrect values written to sequencer registers.
- Fix sequence for single channel reading.
-----BEGIN PGP SIGNATURE-----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=UnWv
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
First set of new device support, fixes, cleanups and features for IIO in 5.18
This cycle we had quite a few series that applied similar changes
to lots of drivers. To keep this description manageable I have
called those out in their own section rather than per driver.
Particularly pleased to see the long running AFE precision series
going in this cycle.
Series includes some late breaking fixes.
New device support
* adi,ada4250 amplifier
- New driver and dt bindings for this programmable gain amplifier.
* adi,admv1014 microwave down-converter
- New driver, dt bindings and some device specific ABI that
may be generalized as more drivers for devices similar to this
are added.
* adi,admv4420 K Band down-converter.
- New driver and dt bindings.
* adi,adxl367 accelerometer driver.
- New driver, dt-bindings + some new IIO ABI definitions to support
reference magnitude events where an estimate of the acceleration
due to gravity has been removed.
- A few fixes as follow up patches.
* adi,ltc2688 DAC with toggle and dither modes.
- New driver and bindings. Includes some new driver specific (for now)
ABI for handling toggle mode and the addition of a dither waveform to
the DAC output.
* AFE (analog front end) add support for additional types of analog device
in front of an ADC.
- RTD temperature sensors with dt bindings.
- Temperature transducers wit dt bindings.
- Related cleanup and features listed in other sections below.
* maxim,ds3502 potentiometer.
- Add support to ds1803 driver which required significant rework.
* mediatek,mt2701-auxadc driver
- Add mediatek,mt8186-auxadc - id table and chip specific info only.
* semtech,sx9324, semtech,ax9360
- Substantial refactoring of sx9310 to extract core logic for reuse
into a separate module
- New driver using this supporting sx9324 proximity sensors.
- New driver using this supporting sx9360 proximity sensors.
* silan,sc7a20
- Compatible with the st,lis2dh (or nearly anyway) so add ID and
chip specific info to enable support. Also silan vendor ID added
for dt-bindings.
Staging graduation
* adi,ad7280a monitoring ADC for stacked lithium-ion batteries in
electric cars and similar.
- Substantial rework of driver required to bring inline with current
IIO best practice. An unusual device in IIO so some interesting features
we may see more of in future.
Multiple driver/core cleanup
- Use sysfs_emit() in simple locations where there is no path to change
to various core created attributes.
- Trivial white space fixes around inconsistency between space after { and
before } in id tables.
- Introduce new handling for fractional types to avoid repeated similar
implementations. Use this in 3 drivers. Note this is also targeted
at future use in the AFE driver and was motivated by discussions
around the precision related work on that driver.
- of related header cleanups - drop of*.h and add mod_devicetable.h as
appropriate.
- Move a number of symbol exports into IIO_* namespaces. Two categories,
1) Library used by multiple drivers e.g. st_sensors
2) Core driver module exporting functions used by bus specific modules.
A few related cleanups in this set.
- Switch from CONFIG_PM_* guards to new DEFINE_SIMPLE_DEV_PM_OPS() and
similar to simplify drivers and take advantage of these new macros
allowing the compiler to do the job or removing unused code without
the need for __maybe_unused markings. Conversion of other drivers to
these new macros ongoing.
Features
* adi,adf4350
- Switch from of specific to generic device properties enabling use with
other firmware types.
* adi,adx345
- Switch from of specific to generic device properties.
- Add ACPI ID ADS0345
- Related driver cleanup.
* adi,hmc425a
- Switch from of specific to generic device properties.
* afe analog rescaler driver
- Wider range of types supported for scale.
- Support offset.
- Kunit tests.
* atlas,ezo-sensor
- Convert from of to device properties.
* fsl,mma8452
- Support mount matrix.
* infineon,dps310:
- Add ACPI ID IFX3100.
* invensense,mpu6050
- Convert to generic device properties.
* maxim,ds1803
- Add out_raw_available before supporting more devices.
- Convert from of specific to device properties.
* samsung,ssp_sensors
- Convert from of specific to device properties.
* st,stm32-timer trigger
- Convert from of specific to device properties.
* ti,hdc101x
- Add ACPI ID TXNW1010.
* ti,tsc2046:
- Add read_raw support to enable use of iio_hwmon and similar.
Fixes / cleanup.
* mailmap
- Update for Cai Huoqing
* MAINTAINERS
- Fix Analog Devices related links.
- Add entry for ADRF6780
- Add entry for ADMV1013
- Add entry for AD7293
- Add entry for ADMV8818
- Update files listed for adis-lib
* iio core:
- Fix wrong comment about current_mode being something a driver should
ever access.
- Use struct_size() rather than open coding in industrialio-hw-consumer
* adi,axl355
- Use units.h definitions instead of local versions.
* adi,adis-lib
- Simplify *updated_bits() macro
- Whitespace cleanup.
* afe - Note many of these fixes only apply to particular configurations
so the problems have probably not been seen in the wild, but will be
visible with new usecases enabled this cycle.
- Fix application of consumer scale for IIO_VAL_INT.
- Apply a scale of 1 when no scale is provided.
- Make best effort to establish a valid offset value for fractional
cases.
- Use s64 for scale calculations where parameters may be signed.
- Tidy up include order.
- Improve accuracy for small fractional sales
- Reduce risk of integer overflow.
* ams,as3935
- Use devm_delayed_work_autocancel() to replace open coded equivalent.
* aspeed,adc
- Fix wrong use of divider flag.
* atmel,sama5d2-adc
- Relax atmel,trigger-edge-type to optional.
- Drop Ludovic Desroches from listed maintainers of the dt-binding
inline with previous MAINTAINERS entry update.
* fsl,mma8452
- Fix probing when i2c_device_id used.
- dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev.
Use dev_to_iio_dev() instead. Note the original path in here
worked more by luck than design.
* invensense,mpu6050
- Drop ACPI_PTR() protection to avoid an unused warning.
- Use fact ACPI_COMPANION() returns null when ACPI_HANDLE() does to
simplify handling.
* motorola,cpcap-adc
- Drop unused assignment.
* qcom,spmi-adc
- Fix wrong example of 'reg' in binding document.
* renesas,rzg2l-adc
- Trivial typo fix.
* semtech,sx9360
- Fix wrong register handling for event generation.
* st_sensors
- Allow manual disabling of I2C or SPI module if not needed for a particular
board. Default is still to enable the bus specific module if
appropriate bus is supported.
* st,lsm6dsx
- dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev.
Use dev_to_iio_dev() instead.
* ti,palmas-gpadc
- Split the interrupt fields in the dt-binding example
* ti,tsc2046
- Rework state machine to improve readability after recent debugging of
an issue fixed elsewhere.
- Add a sanity check to avoid very large memory allocations if a crazy
delay is specified.
* ti,twl6030
- Add error handling if devm_request_threaded_irq() fails.
* xilinx,ams
- Use devm_delayed_work_autocancel() instead of open coding equivalent.
- Fix missing required clock entry in dt-binding.
- Fix miss counting of channels resulting in ps channels not
being enabled.
- Fix incorrect values written to sequencer registers.
- Fix sequence for single channel reading.
* tag 'iio-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (245 commits)
iio: adc: xilinx-ams: Fix single channel switching sequence
iio: adc: xilinx-ams: Fixed wrong sequencer register settings
iio: adc: xilinx-ams: Fixed missing PS channels
dt-bindings: iio: adc: zynqmp_ams: Add clock entry
iio: accel: mma8452: use the correct logic to get mma8452_data
iio: adc: aspeed: Add divider flag to fix incorrect voltage reading.
iio: imu: st_lsm6dsx: use dev_to_iio_dev() to get iio_dev struct
dt-bindings: iio: Add ltc2688 documentation
iio: ABI: add ABI file for the LTC2688 DAC
iio: dac: add support for ltc2688
dt-bindings: iio: afe: add bindings for temperature transducers
dt-bindings: iio: afe: add bindings for temperature-sense-rtd
iio: afe: rescale: add temperature transducers
iio: afe: rescale: add RTD temperature sensor support
iio: test: add basic tests for the iio-rescale driver
iio: afe: rescale: reduce risk of integer overflow
iio: afe: rescale: fix accuracy for small fractional scales
iio: afe: rescale: add offset support
iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
iio: afe: rescale: expose scale processing function
...
Some of the AMS channels need to be read by switching into single-channel
mode from the normal polling sequence. There was a logic issue in this
switching code that could cause the first read of these channels to read
back as zero.
It appears that the sequencer should be set back to default mode before
changing the channel selection, and the channel should be set before
switching the sequencer back into single-channel mode.
Also, write 1 to the EOC bit in the status register to clear it before
waiting for it to become set, so that we actually wait for a new
conversion to complete, and don't proceed based on a previous conversion
completing.
Fixes: d5c70627a7 ("iio: adc: Add Xilinx AMS driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20220127173450.3684318-5-robert.hancock@calian.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Register settings used for the sequencer configuration register
were incorrect, causing some inputs to not be read properly.
Fixes: d5c70627a7 ("iio: adc: Add Xilinx AMS driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20220127173450.3684318-4-robert.hancock@calian.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The code forgot to increment num_channels for the PS channel inputs,
resulting in them not being enabled as they should.
Fixes: d5c70627a7 ("iio: adc: Add Xilinx AMS driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20220127173450.3684318-3-robert.hancock@calian.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The formula for the ADC sampling period in ast2400/ast2500 is:
ADC clock period = PCLK * 2 * (ADC0C[31:17] + 1) * (ADC0C[9:0])
When ADC0C[9:0] is set to 0 the sampling voltage will be lower than
expected, because the hardware may not have enough time to
charge/discharge to a stable voltage. This patch use the flag
CLK_DIVIDER_ONE_BASED which will use the raw value read from the
register, with the value of zero considered invalid to conform to the
corrected formula.
Fixes: 573803234e ("iio: Aspeed ADC")
Reported-by: Konstantin Klubnichkin <kitsok@yandex-team.ru>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220221012705.22008-1-billy_tsai@aspeedtech.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
As the potential failure of the devm_request_threaded_irq(),
it should be better to check the return value and return
error if fails.
Fixes: fa659a40b8 ("iio: adc: twl6030-gpadc: Use devm_* API family")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220224062849.3280966-1-jiasheng@iscas.ac.cn
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use devm_delayed_work_autocancel() instead of hand writing it. This is
less verbose and saves a few lines of code.
devm_delayed_work_autocancel() uses devm_add_action() instead of
devm_add_action_or_reset(). This is fine, because if the underlying memory
allocation fails, no work has been scheduled yet. So there is nothing to
undo.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/2626e6a057e40cd2271ef0e5f81d12e607bad5b4.1644776929.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This is a rather unusual device (in IIO anyway). However, it has
a near to standard userspace ABI.
Note the work to move this out of staging was done against a minimal
QEMU model, which doesn't model all the features of the device.
I have no intention to upstream the QEMU model as it was developed
just to enable this driver cleanup.
https://github.com/jic23/qemu/tree/ad7280a-hacks
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://lore.kernel.org/r/20220206190328.333093-21-jic23@kernel.org
The combinations of either
* pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS()
* pm_ptr() and RUNTIME_PM_OPS()/SYSTEM_SLEEP_PM_OPS
Make sure the functions are always visible to the compiler and removed by
it rather than requring #ifdef magic.
This removes the need to mark the functions as __maybe_unused and saves
additional space with some build options as the dev_pm_ops structure
itself can be dropped automatically if CONFIG_PM is not enabled.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Olivier Moysan <olivier.moysan@st.com>
Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220130193147.279148-51-jic23@kernel.org
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM support is simpler and less error prone than the
use of #ifdef based config guards.
Removing instances of this approach from IIO also stops them being
copied into new drivers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220130193147.279148-46-jic23@kernel.org
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM support is simpler and less error prone than the
use of #ifdef based config guards.
Removing instances of this approach from IIO also stops them being
copied into new drivers.
The new DEFINE_RUNTIME_DEV_PM_OPS() macro reduces boilerplate.
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220130193147.279148-45-jic23@kernel.org
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM support is simpler and less error prone than the
use of #ifdef based config guards.
This case uses the new DEFINE_RUNTIME_DEV_PM_OPS() to reduce
boilerplate.
Removing instances of this approach from IIO also stops them being
copied into new drivers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220130193147.279148-44-jic23@kernel.org
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM_SLEEP support is simpler and less error prone than the
use of ifdef based config guards.
Removing instances of this approach from IIO also stops them being
copied into new drivers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220130193147.279148-16-jic23@kernel.org
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM_SLEEP support is simpler and less error prone than the
use of ifdef based config guards.
Removing instances of this approach from IIO also stops them being
copied into new drivers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220130193147.279148-15-jic23@kernel.org
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM_SLEEP support is simpler and less error prone than the
use of ifdef based config guards.
Removing instances of this approach from IIO also stops them being
copied into new drivers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220130193147.279148-14-jic23@kernel.org
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM_SLEEP support is simpler and less error prone than the
use of #ifdef based config guards.
Removing instances of this approach from IIO also stops them being
copied into new drivers.
In this case SIMPLE_DEV_PM_OPS() could have been used previously.
Now we have DEFINE_SIMPLE_DEV_PM_OPS() which also deals with letting
the compiler remove the structure and functions so use that instead.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220130193147.279148-13-jic23@kernel.org
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM_SLEEP support is simpler and less error prone than the
use of #ifdef based config guards.
Removing instances of this approach from IIO also stops them being
copied into new drivers.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220130193147.279148-12-jic23@kernel.org
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM_SLEEP support is simpler and less error prone than the
use of ifdef based config guards.
Removing instances of this approach from IIO also stops them being
copied into new drivers.
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220130193147.279148-11-jic23@kernel.org
In order to avoid unnecessary pollution of the global symbol namespace
move the core/library functions into a specific namespace and import
that into the various bus specific device drivers that use them.
For more information see https://lwn.net/Articles/760045/
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220130205701.334592-4-jic23@kernel.org
In order to avoid unnecessary pollution of the global symbol namespace
move the core/library functions into a specific namespace and import
that into the various specific device drivers that use them.
For more information see https://lwn.net/Articles/760045/
An alternative here would be to conclude that we are unlikely to see
support for the other ad7091r parts in the near future and just merge
the two modules into one supporting just the i2c -5 variant.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220130205701.334592-3-jic23@kernel.org
In order to avoid unnecessary pollution of the global symbol namespace
move the core/library functions into a specific namespace and import
that into the various specific device drivers that use them.
For more information see https://lwn.net/Articles/760045/
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Renato Lui Geh <renatogeh@gmail.com>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220130205701.334592-2-jic23@kernel.org
The value returned by an spi driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Claudius Heine <ch@denx.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The variable cal_data_diff is being assigned a value that is never read,
it is being re-assigned later on with a new value in both paths of an
if statement. The assignment is redundant, so remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220207135943.340629-1-colin.i.king@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
If iio_device_register() fails, a previous ioremap() is left unbalanced.
Update the error handling path and add the missing iounmap() call, as
already done in the remove function.
Fixes: 74aeac4da6 ("iio: adc: Add MEN 16z188 ADC driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/320fc777863880247c2aff4a9d1a54ba69abf080.1643445149.git.christophe.jaillet@wanadoo.fr
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
On one side we have indio_dev->num_channels includes all physical channels +
timestamp channel. On other side we have an array allocated only for
physical channels. So, fix memory corruption by ARRAY_SIZE() instead of
num_channels variable.
Note the first case is a cleanup rather than a fix as the software
timestamp channel bit in active_scanmask is never set by the IIO core.
Fixes: 9374e8f5a3 ("iio: adc: add ADC driver for the TI TSC2046 controller")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20220107081401.2816357-1-o.rempel@pengutronix.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
To avoid problematic devicetree configurations. Set allocation limit
with error message and suggestion on what can be done to solve this
issue.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20220117082852.3370869-2-o.rempel@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it
knows about the sysfs buffer specifics and has some built-in checks for
size and alignment.
Use sysfs_emit() to format the custom `in_power_shunt_resistor` and
`in_current_shunt_resistor` device attributes of the max9611 driver.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Link: https://lore.kernel.org/r/20211216185217.1054495-11-lars@metafoo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it
knows about the sysfs buffer specifics and has some built-in checks for
size and alignment.
Use sysfs_emit() to format the custom `in_allow_async_readout` device
attribute of the ina2xx-adc driver.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20211216185217.1054495-7-lars@metafoo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it
knows about the sysfs buffer specifics and has some built-in checks for
size and alignment.
Use sysfs_emit() to format the custom `ac_excitation` and `bridge_swtich`
attributes of the ad7192 driver.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20211216185217.1054495-4-lars@metafoo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Initially this was designed to:
| Fix sleeping in atomic context warning and a deadlock after iio_trigger_poll()
| call
|
| If iio_trigger_poll() is called after IRQ was disabled, we will call
| reenable_trigger() directly from hard IRQ or hrtimer context instead of
| IRQ thread. In this case we will run in to multiple issue as sleeping in atomic
| context and a deadlock.
|
| To avoid this issue, rework the trigger to use state machine. All state
| changes are done over the hrtimer, so it allows us to drop fsleep() and
| avoid the deadlock.
Since this issue was fixed by: 9020ef6598 ("iio: trigger: Fix a scheduling
whilst atomic issue seen on tsc2046"). This patch is a cleanup to make
state machine easier to follow.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20220111130402.3404769-1-o.rempel@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This commit adds mt8186 compatible node.
Signed-off-by: Guodong Liu <guodong.liu@mediatek.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220110084841.575-2-guodong.liu@mediatek.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Previously inconsistent with a space after { but not before }.
Tidy that up to avoid providing an example to copy into new drivers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20211230174911.78291-14-jic23@kernel.org
Previously inconsistent with space after { but not before }.
Tidy that up to avoid providing a bad example to copy into new drivers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20211230174911.78291-13-jic23@kernel.org
Previously inconsistent with space after { and not before }.
Tidy that up to avoid providing a bad example to copy into new drivers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Zhiyong Tao <zhiyong.tao@mediatek.com>
Cc: Hui Liu <hui.liu@mediatek.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20211230174911.78291-12-jic23@kernel.org
-----BEGIN PGP SIGNATURE-----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=RKW4
-----END PGP SIGNATURE-----
Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- introduce for_each_set_bitrange()
- use find_first_*_bit() instead of find_next_*_bit() where possible
- unify for_each_bit() macros
* tag 'bitmap-5.17-rc1' of git://github.com/norov/linux:
vsprintf: rework bitmap_list_string
lib: bitmap: add performance test for bitmap_print_to_pagebuf
bitmap: unify find_bit operations
mm/percpu: micro-optimize pcpu_is_populated()
Replace for_each_*_bit_from() with for_each_*_bit() where appropriate
find: micro-optimize for_each_{set,clear}_bit()
include/linux: move for_each_bit() macros from bitops.h to find.h
cpumask: replace cpumask_next_* with cpumask_first_* where appropriate
tools: sync tools/bitmap with mother linux
all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
cpumask: use find_first_and_bit()
lib: add find_first_and_bit()
arch: remove GENERIC_FIND_FIRST_BIT entirely
include: move find.h from asm_generic to linux
bitops: move find_bit_*_le functions from le.h to find.h
bitops: protect find_first_{,zero}_bit properly
find_first{,_zero}_bit is a more effective analogue of 'next' version if
start == 0. This patch replaces 'next' with 'first' where things look
trivial.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Includes some fixes that were either late breaking, low priority or
complex enough to not be good to rush in late in the cycle.
Tree rebased today to fix up some trivial issues + pull in a fix that
was previously on the fixes-togreg branch. Vast majority have been
in linux-next for some time now.
New device support
* adi,ad7293
- New driver and bindings for this Power Amplifier drain current
controller. A complex device with various related monitoring functions.
* adi,ad75513R
- New driver and bindings for this combined ADC and DAC device.
- A few follow up fixes.
* adi,admv8818
- New driver (and type) for this 2-18GHz filter device. Includes
bindings and ABI documentation to allow clk_notifier based auto
adjustment of the filters in appropriate applications.
* liteon,ltr501
- Support for the ltr303. ID and chip specific info table.
* xilinx,ams
- New generic firmware function fwnode_iomap() as used in this driver.
- New driver and bindings for this ADC and on-chip sensors as found
in various Xilinx devices.
Core
* Introduced IIO_VAL_INT_64 which uses val and val2 in IIO callbacks to
form a 64 bit integer when higher precision needed.
* Allow IIO_ENUM_AVAILABLE to be used with different shared values.
* Fix a long term issue with scheduling whilst atomic when iio_trig_poll()
is called but no trigger consumers are actually enabled and hence the
trigger may be reenabled from the interrupt handler. Seen in the wild
on the tsc2046.
* Mark iio_device_type const.
* buffer: Use a separate index variable to simplify code.
* buffer-dma: Clear out unused struct iio_buffer_block
* buffer-dmaengine: Switch to cheaper round_down() as power of 2 values.
Tests/tools
* format_value
- Check against NULL returns from allocations in tests.
- Add IIO_VAL_INT_64 test case.
* event_monitor
- Flush the output after event to given more consistent latency
when tool output piped to other programs.
Driver Features
* axp20x
- Add support for NTC thermistor channel and document TS pin binding.
* arm,scmi
- Add reading of raw channel values (using IIO_VAL_INT_64)
* liteon,ltr501
- Add proximity-near-level support and dt-binding.
Tree wide cleanup
* Remove no-op trigger ops from multiple drivers.
* Stop using dev_get_drvdata() on the iio_dev->dev in various drivers
and then stop assigning it to allow this to be used for other purposes.
We can always get to the indio_dev using dev_to_iio_dev() which is
a container_of() based approach. Also cleanup up some related unnecessary
convoluted cases.
- atmel,at91-sam5d2
- nxp,imx7d
- meas,ms5611
- st,st_sensors
* Where available (or easy to introduce) use the scan_type.* values
in place of a second copy for read_raw and similar paths.
- adi,ad7266
- bosch,bma220
- fsl,mac3110
- fsl,mma7455
- fsl,mpl3115
- kionix,kcjk-1013
- sensortek,stk8ba50
- sensortek,stk8312
- ti,adc12138
- ti,ads1015
- vti,sca3000
- xilinx,xadc-core
* Switch drives over to generic firmware properties including appropriate
header changes to avoid including of.h
- Various DACs had false CONFIG_OF dependencies.
- dpot-dac
- envelope-detector
- adi,ad5755
- adi,ad5758
- capella,cm3605
- maxim,max9611
- microchip,mcp41010
- microchip,mcp3911
- ti,adc12138
* Trivial clang warning fixes for W=1 warnings.
Driver specific cleanup and minor fixes
* adi,ad7606
- Comment fixes.
* ams,ad3935
- Drop pointless cast to the same type.
* atmel,at91-sama5d2
- Fix wrong cast of iio_dev->dev to platform_device that happened to
be harmless.
* fsl,mma7660
- Stop i2c remove() function returning an error code. Part of a rework
to eventually stop returning anything from these.
* fsl,mma8452
- Use correct type for local irqreturn_t.
* nxp,imx8mq
- Maintainer email address update.
* nxp,lpc18xx_adc
- Ensure clk_prepare_enable() called before clk_get_rate().
- Switch of.h for mod_devicetable.h to reflect no of specific functions,
just the id table.
* renesas,rzg2l
- Drop a dev_err() that just duplicates error printed in platform_get_irq()
* sgx,vz89x
- Drop pointless cast.
* st,lsm6dsx
- Make it possible to disable the sensorhub from DT to avoid a corner
case where the address of a slave device many be accidentally modified.
* st,stm32-adc
- Stop leaking an of_node in an error path.
* st,stmp2
- Avoid wrong sized type for bit field which could result in
over-reading (harmless). Precursor to enabling -Warray-bounds.
* ti,adc081c
- Put back some ACPI support for non standards compliant ADC081C
ID because it is known to be in the wild on some Aaeon boards.
* ti,ads8688
- Cleanup redundant local ret variable assignment.
* ti,ina2xx-adc
- Use helper macro kthread_run() to replace some boilerplate.
- Avoid double reference counting.
- Drop pointless cast.
* xilinx,xadc
- Make the IRQ optional as not always wired to the host system.
-----BEGIN PGP SIGNATURE-----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=xXvq
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.17a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, features and cleanup for 5.17
Includes some fixes that were either late breaking, low priority or
complex enough to not be good to rush in late in the cycle.
Tree rebased today to fix up some trivial issues + pull in a fix that
was previously on the fixes-togreg branch. Vast majority have been
in linux-next for some time now.
New device support
* adi,ad7293
- New driver and bindings for this Power Amplifier drain current
controller. A complex device with various related monitoring functions.
* adi,ad75513R
- New driver and bindings for this combined ADC and DAC device.
- A few follow up fixes.
* adi,admv8818
- New driver (and type) for this 2-18GHz filter device. Includes
bindings and ABI documentation to allow clk_notifier based auto
adjustment of the filters in appropriate applications.
* liteon,ltr501
- Support for the ltr303. ID and chip specific info table.
* xilinx,ams
- New generic firmware function fwnode_iomap() as used in this driver.
- New driver and bindings for this ADC and on-chip sensors as found
in various Xilinx devices.
Core
* Introduced IIO_VAL_INT_64 which uses val and val2 in IIO callbacks to
form a 64 bit integer when higher precision needed.
* Allow IIO_ENUM_AVAILABLE to be used with different shared values.
* Fix a long term issue with scheduling whilst atomic when iio_trig_poll()
is called but no trigger consumers are actually enabled and hence the
trigger may be reenabled from the interrupt handler. Seen in the wild
on the tsc2046.
* Mark iio_device_type const.
* buffer: Use a separate index variable to simplify code.
* buffer-dma: Clear out unused struct iio_buffer_block
* buffer-dmaengine: Switch to cheaper round_down() as power of 2 values.
Tests/tools
* format_value
- Check against NULL returns from allocations in tests.
- Add IIO_VAL_INT_64 test case.
* event_monitor
- Flush the output after event to given more consistent latency
when tool output piped to other programs.
Driver Features
* axp20x
- Add support for NTC thermistor channel and document TS pin binding.
* arm,scmi
- Add reading of raw channel values (using IIO_VAL_INT_64)
* liteon,ltr501
- Add proximity-near-level support and dt-binding.
Tree wide cleanup
* Remove no-op trigger ops from multiple drivers.
* Stop using dev_get_drvdata() on the iio_dev->dev in various drivers
and then stop assigning it to allow this to be used for other purposes.
We can always get to the indio_dev using dev_to_iio_dev() which is
a container_of() based approach. Also cleanup up some related unnecessary
convoluted cases.
- atmel,at91-sam5d2
- nxp,imx7d
- meas,ms5611
- st,st_sensors
* Where available (or easy to introduce) use the scan_type.* values
in place of a second copy for read_raw and similar paths.
- adi,ad7266
- bosch,bma220
- fsl,mac3110
- fsl,mma7455
- fsl,mpl3115
- kionix,kcjk-1013
- sensortek,stk8ba50
- sensortek,stk8312
- ti,adc12138
- ti,ads1015
- vti,sca3000
- xilinx,xadc-core
* Switch drives over to generic firmware properties including appropriate
header changes to avoid including of.h
- Various DACs had false CONFIG_OF dependencies.
- dpot-dac
- envelope-detector
- adi,ad5755
- adi,ad5758
- capella,cm3605
- maxim,max9611
- microchip,mcp41010
- microchip,mcp3911
- ti,adc12138
* Trivial clang warning fixes for W=1 warnings.
Driver specific cleanup and minor fixes
* adi,ad7606
- Comment fixes.
* ams,ad3935
- Drop pointless cast to the same type.
* atmel,at91-sama5d2
- Fix wrong cast of iio_dev->dev to platform_device that happened to
be harmless.
* fsl,mma7660
- Stop i2c remove() function returning an error code. Part of a rework
to eventually stop returning anything from these.
* fsl,mma8452
- Use correct type for local irqreturn_t.
* nxp,imx8mq
- Maintainer email address update.
* nxp,lpc18xx_adc
- Ensure clk_prepare_enable() called before clk_get_rate().
- Switch of.h for mod_devicetable.h to reflect no of specific functions,
just the id table.
* renesas,rzg2l
- Drop a dev_err() that just duplicates error printed in platform_get_irq()
* sgx,vz89x
- Drop pointless cast.
* st,lsm6dsx
- Make it possible to disable the sensorhub from DT to avoid a corner
case where the address of a slave device many be accidentally modified.
* st,stm32-adc
- Stop leaking an of_node in an error path.
* st,stmp2
- Avoid wrong sized type for bit field which could result in
over-reading (harmless). Precursor to enabling -Warray-bounds.
* ti,adc081c
- Put back some ACPI support for non standards compliant ADC081C
ID because it is known to be in the wild on some Aaeon boards.
* ti,ads8688
- Cleanup redundant local ret variable assignment.
* ti,ina2xx-adc
- Use helper macro kthread_run() to replace some boilerplate.
- Avoid double reference counting.
- Drop pointless cast.
* xilinx,xadc
- Make the IRQ optional as not always wired to the host system.
* tag 'iio-for-5.17a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (103 commits)
iio: adc: ti-adc081c: Partial revert of removal of ACPI IDs
iio:addac:ad74413r: Fix uninitialized ret in a path that won't be hit.
MAINTAINERS: Add maintainer for xilinx-ams
dt-bindings: iio: adc: Add Xilinx AMS binding documentation
iio: adc: Add Xilinx AMS driver
device property: Add fwnode_iomap()
iio:accel:kxcjk-1013: Mark struct __maybe_unused to avoid warning.
iio:accel:bmc150: Mark structure __maybe_unused as only needed with for pm ops.
iio:dummy: Drop set but unused variable len.
iio:magn:ak8975: Suppress clang W=1 warning about pointer to enum conversion.
iio:imu:inv_mpu6050: Suppress clang W=1 warning about pointer to enum conversion.
iio:imu:inv_icm42600: Suppress clang W=1 warning about pointer to enum conversion.
iio:dac:mcp4725: Suppress clang W=1 warning about pointer to enum conversion.
iio:amplifiers:hmc425a: Suppress clang W=1 warning about pointer to enum conversion.
iio:adc:ti-ads1015: Suppress clang W=1 warning about pointer to enum conversion.
iio:adc:rcar: Suppress clang W=1 warning about pointer to enum conversion.
iio:adc:ina2xx-adc: Suppress clang W=1 warning about pointer to enum conversion.
iio:accel:bma180: Suppress clang W=1 warning about pointer to enum conversion.
drivers:iio:dac: Add AD3552R driver support
dt-bindings: iio: dac: Add adi,ad3552r.yaml
...
Unfortuanately a non standards compliant ACPI ID is known to be
in the wild on some AAEON boards.
Partly revert the removal of these IDs so that ADC081C will again
work + add a comment to that affect for future reference.
Whilst here use generic firmware properties rather than the ACPI
specific handling previously found in this driver.
Reported-by: Kunyang Fan <Kunyang_Fan@aaeon.com.tw>
Fixes: c458b7ca3f ("iio:adc:ti-adc081c: Drop ACPI ids that seem very unlikely to be official.")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Kunyang Fan <Kunyang_Fan@aaeon.com.tw> #UP-extremei11
Link: https://lore.kernel.org/r/20211205172728.2826512-1-jic23@kernel.org
Cc: <Stable@vger.kernel.org>
The AMS includes an ADC as well as on-chip sensors that can be used to
sample external voltages and monitor on-die operating conditions, such
as temperature and supply voltage levels. The AMS has two SYSMON blocks.
PL-SYSMON block is capable of monitoring off chip voltage and
temperature.
PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring
from an external master. Out of these interfaces currently only DRP is
supported. Other block PS-SYSMON is memory mapped to PS.
The AMS can use internal channels to monitor voltage and temperature as
well as one primary and up to 16 auxiliary channels for measuring
external voltages.
The voltage and temperature monitoring channels also have event capability
which allows to generate an interrupt when their value falls below or
raises above a set threshold.
Co-developed-by: Manish Narani <manish.narani@xilinx.com>
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Signed-off-by: Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com>
Link: https://lore.kernel.org/r/20211203212358.31444-4-anand.ashok.dumbre@xilinx.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
`buf` is cast to a const char *, but `buf` is already a const char *, so
the case is unnecessary.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The find.h APIs are designed to be used only on unsigned long arguments.
This can technically result in a over-read, but it is harmless in this
case. Regardless, fix it to avoid the warning seen under -Warray-bounds,
which we'd like to enable globally:
In file included from ./include/linux/bitmap.h:9,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/cpumask.h:5,
from ./arch/x86/include/asm/msr.h:11,
from ./arch/x86/include/asm/processor.h:22,
from ./arch/x86/include/asm/cpufeature.h:5,
from ./arch/x86/include/asm/thread_info.h:53,
from ./include/linux/thread_info.h:60,
from ./arch/x86/include/asm/preempt.h:7,
from ./include/linux/preempt.h:78,
from ./include/linux/spinlock.h:55,
from ./include/linux/swait.h:7,
from ./include/linux/completion.h:12,
from drivers/iio/adc/stmpe-adc.c:10:
drivers/iio/adc/stmpe-adc.c: In function 'stmpe_adc_probe':
./include/linux/find.h:98:23: warning: array subscript 'long unsigned int[0]' is partly outside array bounds of 'u32[1]' {aka 'unsigned int[1]'} [-Warray-bounds]
98 | val = *addr | ~GENMASK(size - 1, offset);
| ^~~~~
drivers/iio/adc/stmpe-adc.c:258:13: note: while referencing 'norequest_mask'
258 | u32 norequest_mask = 0;
| ^~~~~~~~~~~~~~
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Return value from ads8688_prog_write() directly instead
of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
We could probably drop a lot more of these, but for now this removes
unnecessary restrictions on stand alone ADC devices.
For these 3 drivers the false dependency seems to date all
the way back to their initial introduction.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Nothing in this driver depends on OF firmware so drop the dependency
and update the headers to remove the false impression such a dependency
exists.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
There is nothing directly using of specific interfaces in this driver,
so lets not include the headers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
This enables using the driver with other firmware types such
as ACPI via PRP0001.
Also part of a general attempt to move IIO drivers over to generic
properties to avoid opportunities for cut and paste.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
This allows use of the driver with other types of firmware such as ACPI
PRP0001 based probing.
Also part of a general attempt to remove direct use of of_ specific
accessors from IIO.
Added an include for mod_devicetable.h whilst here to cover the
struct of_device_id definition.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Kent Gustavsson <kent@minoris.se>
Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Note the handling of the device tree node in this driver was somewhat
unusual. I have cleaned that up whilst also moving over to generic
properties.
Part of a general attempt to move all IIO drivers over to generic
firmware properties both as a general improvement and to avoid sources
of cut and paste into future drivers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Most AXPxxx-based reference designs place a 10k NTC thermistor on a
TS pin. When appropriately configured, AXP PMICs will inject fixed
current (80uA by default) into TS pin and measure the voltage across a
thermistor. The PMIC itself will by default compare this voltage with
predefined thresholds and disable battery charging whenever
the battery is too hot or too cold.
Alternatively, the TS pin can be configured as general-purpose
ADC input. This mode is not supported by the driver.
This patch allows reading the voltage on the TS pin. It can be then
either processed by userspace or used by kernel consumer like hwmon
ntc thermistor driver.
Signed-off-by: Evgeny Boger <boger@wirenboard.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Quentin Schulz <foss+kernel@0leil.net>
Link: https://lore.kernel.org/r/20211118141233.247907-2-boger@wirenboard.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The shared parameter should be configurable based on its usage, and not
constrained to IIO_SHARED_BY_TYPE.
This patch aims to improve the flexibility in using the
IIO_ENUM_AVAILABLE define and avoid redefining custom iio enums that
expose the shared parameter.
An example is the ad5766.c driver where IIO_ENUM_AVAILABLE_SHARED was
defined in order to achieve `shared` parameter customization.
The current state of the IIO_ENUM_AVAILABLE implementation will imply
similar redefinitions each time a driver will require access to the
`shared` parameter. An example would be admv1013 driver which will
require custom device attribute for the frequency translation modes:
Quadrature I/Q mode and Intermediate Frequency mode.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211119085627.6348-1-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
dev_err_probe() calls __device_set_deferred_probe_reason()
on -EPROBE_DEFER error. If device pointer to driver core
private structure is not initialized, an null pointer error occurs.
This pointer is set on iio_device_register() call for iio device.
dev_err_probe() must be called with the device which is probing.
Replace iio device by its parent device.
Fixes: 0e346b2cfa ("iio: adc: stm32-adc: add vrefint calibration support")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/20211122143809.2332-1-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use scan_type when processing raw data which also fixes that the sign
extension was from the wrong bit.
Use channel definition as root of trust and replace constant
when reading elements directly using the raw sysfs attributes.
Fixes: 6794e23fa3 ("iio: adc: at91-sama5d2_adc: add support for oversampling resolution")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Eugen Hristev <eugen.hristev@microchip.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211104082413.3681212-9-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Both the charging and discharging currents on AXP22x are stored as
12-bit integers, in accordance with the datasheet.
It's also confirmed by vendor BSP (axp20x_adc.c:axp22_icharge_to_mA).
The scale factor of 0.5 is never mentioned in datasheet, nor in the
vendor source code. I think it was here to compensate for
erroneous addition bit in register width.
Tested on custom A40i+AXP221s board with external ammeter as
a reference.
Fixes: 0e34d5de96 ("iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs")
Signed-off-by: Evgeny Boger <boger@wirenboard.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20211116213746.264378-1-boger@wirenboard.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
IIO trigger handlers must call iio_trigger_notify_done() when done. This
must be done even when an error occurred. Otherwise the trigger will be
seen as busy indefinitely and the trigger handler will never be called
again.
The ad7768-1 driver neglects to call iio_trigger_notify_done() when there
is an error reading the converter data. Fix this by making sure that
iio_trigger_notify_done() is included in the error exit path.
Fixes: a5f8c7da3d ("iio: adc: Add AD7768-1 ADC basic support")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20211101144055.13858-2-lars@metafoo.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Commit 1e23dcaa1a ("iio: imx8qxp-adc: Add driver support for NXP IMX8QXP
ADC") adds the config IMX8QXP_ADC for this new driver, which depends on
the non-existing config ARCH_MXC_ARM64.
Hence, ./scripts/checkkconfigsymbols.py warns:
ARCH_MXC_ARM64
Referencing files: drivers/iio/adc/Kconfig
Probably, the existing config ARCH_MXC is intended to be referred here.
So, repair the dependency to refer to that config.
Fixes: 1e23dcaa1a ("iio: imx8qxp-adc: Add driver support for NXP IMX8QXP ADC")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20211111083954.6286-1-lukas.bulwahn@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Registering a trigger can fail and the return value of
devm_iio_trigger_register() must be checked. Otherwise undefined behavior
can occur when the trigger is used.
Fixes: 7c0299e879 ("iio: adc: Add support for DLN2 ADC")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20211101133043.6974-1-lars@metafoo.de
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When reading the voltage:
$ cat /sys/bus/iio/devices/iio\:device0/in_voltage0_raw
Lockdep complains:
[ 153.910616] ======================================================
[ 153.916918] WARNING: possible circular locking dependency detected
[ 153.923221] 5.14.0+ #5 Not tainted
[ 153.926692] ------------------------------------------------------
[ 153.932992] cat/717 is trying to acquire lock:
[ 153.937525] c2585358 (&indio_dev->mlock){+.+.}-{3:3}, at: iio_device_claim_direct_mode+0x28/0x44
[ 153.946541]
but task is already holding lock:
[ 153.952487] c2585860 (&dln2->mutex){+.+.}-{3:3}, at: dln2_adc_read_raw+0x94/0x2bc [dln2_adc]
[ 153.961152]
which lock already depends on the new lock.
Fix this by not calling into the iio core underneath the dln2->mutex lock.
Fixes: 7c0299e879 ("iio: adc: Add support for DLN2 ADC")
Cc: Jack Andersen <jackoalan@gmail.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20211018113731.25723-1-noralf@tronnes.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Some I/Os are connected to ADC input channels, when the corresponding bit
in PCSEL register are set on STM32H7 and STM32MP15. This is done in the
prepare routine of stm32-adc driver.
There are constraints here, as PCSEL shouldn't be set when VDDA supply
is disabled. Enabling/disabling of VDDA supply in done via stm32-adc-core
runtime PM routines (before/after ADC is enabled/disabled).
Currently, PCSEL remains set when disabling ADC. Later on, PM runtime
can disable the VDDA supply. This creates some conditions on I/Os that
can start to leak current.
So PCSEL needs to be cleared when disabling the ADC.
Fixes: 95e339b6e8 ("iio: adc: stm32: add support for STM32H7")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Reviewed-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/1634905169-23762-1-git-send-email-fabrice.gasnier@foss.st.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The print function dev_err() is redundant because
platform_get_irq() already prints an error.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211105015504.39226-1-vulab@iscas.ac.cn
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
By using scan_type.realbits when processing raw data,
we use scan_type.shit only once, thus we don't need to define a local
variable for it anymore.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20211104082413.3681212-12-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use channel definition as root of trust and replace constant
when reading elements directly using the raw sysfs attributes.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20211104082413.3681212-10-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use channel definition as root of trust and replace constant
when reading elements directly using the raw sysfs attributes.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20211104082413.3681212-8-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Using `dev_get_drvdata()` in IIO sysfs callbacks to get a pointer to the
IIO device is a relic from the very early days of IIO. The IIO core as well
as most other drivers have switched over to using `dev_to_iio_dev()`
instead.
This driver is one of the last few drivers remaining that uses the outdated
idiom, update it. This will allow to eventually update the IIO core to no
longer set the drvdata for the IIO device and free it up for driver usage.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20211019082929.30503-2-lars@metafoo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The at91-sama5d2 driver calls `to_platform_device()` on a struct device
that is part of a IIO device. This is incorrect since
`to_platform_device()` must only be called on a struct device that is part
of a platform device.
The code still works by accident because non of the struct platform_device
specific fields are accessed.
Refactor the code a bit so that it behaves identically, but does not use
the incorrect cast. This avoids accidentally adding undefined behavior in
the future by assuming the `struct platform_device` is actually valid.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Eugen Hristev <eugen.hristev@microchip.com>
Link: https://lore.kernel.org/r/20211019082929.30503-1-lars@metafoo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The IIO core handles a trigger ops with all NULL callbacks the
same as if the trigger ops itself was NULL.
Remove the empty trigger ops from the interrupt trigger driver to slightly
reduce the boilerplate code. Object size of the driver module is also
slightly reduced.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20211031142130.20791-3-lars@metafoo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
kthread_run() and kthread_stop() already do reference
counting of the task, so remove get_task_struct/put_task_struct()
to avoid double reference counting.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20211021124254.3247-2-caihuoqing@baidu.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Repalce kthread_create/wake_up_process() with kthread_run()
to simplify the code.
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20211021124254.3247-1-caihuoqing@baidu.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The `imx7d_adc_enable()` and `imx7d_adc_disable()` functions are used as
the suspend and resume callbacks for the device. When called as
suspend/resume functions they are called with the platform_device's device
as their parameter.
In addition the functions are called on device probe and remove. In this
case they are passed the struct device of the IIO device that the driver
registers.
This works because in the `imx7d_adc_{enable,disable}()` functions the
passed struct device is only ever used as a parameter to `dev_get_drvdata()`
and `dev_get_drvdata()` returns the same value for the platform device and
the IIO device.
But for consistency we should pass the same struct device to the
`imx7d_adc_{enable,disable}()` in all cases. This will avoid accidental
breakage if the device is ever used for something more than
`dev_get_drvdata()`.
Another motivation is that `dev_get_drvdata()` on the IIO device relies on
the IIO core calling `dev_set_drvdata()`. Something we want to remove.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20211020085754.16654-1-lars@metafoo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix following coccicheck warning:
./drivers/iio/adc/stm32-adc.c:2014:1-33: WARNING: Function
for_each_available_child_of_node should have of_node_put() before return.
Early exits from for_each_available_child_of_node should decrement the
node reference counter. Replace return by goto here.
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20211021121826.6339-1-wanjiabing@vivo.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In some setups the IRQ signal of the XADC might not be wired to the host
system. The driver currently requires that an interrupt is specified. Make
the interrupt optional so the driver can be used in such setups where the
interrupt is not connected.
Since both the internal triggers as well as events depend on the interrupt
being connected both are not available when the interrupt is not connected.
Buffered access is still supported even without an interrupt since an
external trigger can be used.
The IRQ is only optional when using the AXI interface, since the PCAP
interface needs the IRQ for reading and writing registers.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20211021125950.28707-1-lars@metafoo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
clk_get_rate() is not guaranteed to work if called before
clk_prepare_enable().
Reorder clk_get_rate(), so it's called after clk_prepare_enable() and
after devm_add_action_or_reset() of lpc18xx_clk_disable().
Not that this is not a problem on this particular device, but it is
good to remove a case that might get copied elsewhere.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: André Gustavo Nakagomi Lopez <andregnl@usp.br>
Link: https://lore.kernel.org/r/YXag5l4xBkGQH3tq@Andryuu.br
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
- Remove support for TI TPS80031/TPS80032 PMICs
- New Device Support
- Add support for Magnetic Reader to TI AM335x
- Add support for DA9063_EA to Dialog DA9063
- Add support for SC2730 PMIC to Spreadtrum SC27xx
- Add support for MacBookPro16,2 ICL-N UART Intel LPSS PCI
- Add support for lots of new PMICS in QCom SPMI PMIC
- Add support for ADC to Diolan DLN2
- New Functionality
- Add support for Power Off to Rockchip RK817
- Fix-ups
- Simplify Regmap passing to child devices; hi6421-spmi-pmic
- SPDX licensing updates; ti_am335x_tscadc
- Improve error handling; ti_am335x_tscadc
- Expedite clock search; ti_am335x_tscadc
- Generic simplifications; ti_am335x_tscadc
- Use generic macros/defines; ti_am335x_tscadc
- Remove unused code; ti_am335x_tscadc, cros_ec_dev
- Convert to GPIOD; wcd934x
- Add namespacing; ti_am335x_tscadc
- Restrict compilation to relevant arches; intel_pmt
- Provide better description/documentation; exynos_lpass
- Add SPI device ID table; altera-a10sr, motorola-cpcap, sprd-sc27xx-spi
- Change IRQ handling; qcom-pm8xxx
- Split out I2C and SPI code; arizona
- Explicitly include used headers; altera-a10sr
- Convert sysfs show() function to; sysfs_emit
- Standardise *_exit() and *_remove() return values; mc13xxx, stmpe, tps65912
- Trivial (style/spelling/whitespace) fixups; ti_am335x_tscadc, qcom-spmi-pmic,
max77686-private
- Device Tree fix-ups; ti,am3359-tscadc, samsung,s2mps11, samsung,s2mpa01,
samsung,s5m8767, brcm,misc, brcm,cru, syscon, qcom,tcsr,
xylon,logicvc, max77686, x-powers,ac100, x-powers,axp152,
x-powers,axp209-gpio, syscon, qcom,spmi-pmic
- Bug Fixes
- Balance refcounting (get/put); ti_am335x_tscadc, mfd-core
- Fix IRQ trigger type; sec-irq, max77693, max14577
- Repair off-by-one; altera-sysmgr
- Add explicit 'select MFD_CORE' to MFD_SIMPLE_MFD_I2C
-----BEGIN PGP SIGNATURE-----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=SJ7N
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Removed Drivers:
- Remove support for TI TPS80031/TPS80032 PMICs
New Device Support:
- Add support for Magnetic Reader to TI AM335x
- Add support for DA9063_EA to Dialog DA9063
- Add support for SC2730 PMIC to Spreadtrum SC27xx
- Add support for MacBookPro16,2 ICL-N UART Intel LPSS PCI
- Add support for lots of new PMICS in QCom SPMI PMIC
- Add support for ADC to Diolan DLN2
New Functionality:
- Add support for Power Off to Rockchip RK817
Fix-ups:
- Simplify Regmap passing to child devices in hi6421-spmi-pmic
- SPDX licensing updates in ti_am335x_tscadc
- Improve error handling in ti_am335x_tscadc
- Expedite clock search in ti_am335x_tscadc
- Generic simplifications in ti_am335x_tscadc
- Use generic macros/defines in ti_am335x_tscadc
- Remove unused code in ti_am335x_tscadc, cros_ec_dev
- Convert to GPIOD in wcd934x
- Add namespacing in ti_am335x_tscadc
- Restrict compilation to relevant arches in intel_pmt
- Provide better description/documentation in exynos_lpass
- Add SPI device ID table in altera-a10sr, motorola-cpcap,
sprd-sc27xx-spi
- Change IRQ handling in qcom-pm8xxx
- Split out I2C and SPI code in arizona
- Explicitly include used headers in altera-a10sr
- Convert sysfs show() function to in sysfs_emit
- Standardise *_exit() and *_remove() return values in mc13xxx,
stmpe, tps65912
- Trivial (style/spelling/whitespace) fixups in ti_am335x_tscadc,
qcom-spmi-pmic, max77686-private
- Device Tree fix-ups in ti,am3359-tscadc, samsung,s2mps11,
samsung,s2mpa01, samsung,s5m8767, brcm,misc, brcm,cru, syscon,
qcom,tcsr, xylon,logicvc, max77686, x-powers,ac100,
x-powers,axp152, x-powers,axp209-gpio, syscon, qcom,spmi-pmic
Bug Fixes:
- Balance refcounting (get/put) in ti_am335x_tscadc, mfd-core
- Fix IRQ trigger type in sec-irq, max77693, max14577
- Repair off-by-one in altera-sysmgr
- Add explicit 'select MFD_CORE' to MFD_SIMPLE_MFD_I2C"
* tag 'mfd-next-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (95 commits)
mfd: simple-mfd-i2c: Select MFD_CORE to fix build error
mfd: tps80031: Remove driver
mfd: max77686: Correct tab-based alignment of register addresses
mfd: wcd934x: Replace legacy gpio interface for gpiod
dt-bindings: mfd: qcom: pm8xxx: Add pm8018 compatible
mfd: dln2: Add cell for initializing DLN2 ADC
mfd: qcom-spmi-pmic: Add missing PMICs supported by socinfo
mfd: qcom-spmi-pmic: Document ten more PMICs in the binding
mfd: qcom-spmi-pmic: Sort compatibles in the driver
mfd: qcom-spmi-pmic: Sort the compatibles in the binding
mfd: janz-cmoio: Replace snprintf in show functions with sysfs_emit
mfd: altera-a10sr: Include linux/module.h
mfd: tps65912: Make tps65912_device_exit() return void
mfd: stmpe: Make stmpe_remove() return void
mfd: mc13xxx: Make mc13xxx_common_exit() return void
dt-bindings: mfd: syscon: Add samsung,exynosautov9-sysreg compatible
mfd: altera-sysmgr: Fix a mistake caused by resource_size conversion
dt-bindings: gpio: Convert X-Powers AXP209 GPIO binding to a schema
dt-bindings: mfd: syscon: Add rk3368 QoS register compatible
mfd: arizona: Split of_match table into I2C and SPI versions
...
New device support
* adrf6780 microwave upconverter.
- New driver for this interesting device including bindings.
Features
* lite-on ltr501
- Add dt-bindings including vendor ID and of_device_id table.
- Add regulator support.
* sensiron,scd4x
- Add reporting of channel scale.
Cleanups including fixes for things in this cycle
* Tree wide: Another set of dev_err_probe() introductions to reduce
noise in logs when deferred probing is needed and provide more debug
info. Devices included this time:
- amlogic,meson_saradc
- capella,cm3605
- fsl,imx7d
- maxim,max1118
- maxim,max1241
- nxp,lpc18xx
- qcom,pm8xxxx-xoadc
- rockchip,saradc
- sharp,gp2ap002
- sterricson,ab8500
- ti,ads7950
* core - iio:buffer
- Fix a path where a ret value is not intialized.
* channel-mux
- Add support to mux core subsystem for a settling delay and use
it in the iio-channel-mux driver.
- Fix a few dt binding warnings.
* nxp,lpc18xx
- Convert to devm_ functions for all of probe and drop remove()
* st,lsm6dsx
- Suppress a warning due to lack of handling of an enum *_MAX entry
that is just there to get the size.
* st,stm32-adc
- Add generic channel binding, deprecating the old approach.
- Add nvmem support to get calibration data for the vrefint channel and
use it to perform such calibration.
- Add a binding for sample-time to the generic channel description as it
can be per channel.
* ti,adc128s052
- Use devm_ managed functions and drop remove()
* vti,sca3000
- Use sign_extend32() rather than opencoding.
* xilinx,xadc
- Drop irq field from state structure as now just used in probe.
-----BEGIN PGP SIGNATURE-----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=XWvW
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.16b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
2nd set of IIO new driver, cleanups and features for the 5.16 cycle
New device support
* adrf6780 microwave upconverter.
- New driver for this interesting device including bindings.
Features
* lite-on ltr501
- Add dt-bindings including vendor ID and of_device_id table.
- Add regulator support.
* sensiron,scd4x
- Add reporting of channel scale.
Cleanups including fixes for things in this cycle
* Tree wide: Another set of dev_err_probe() introductions to reduce
noise in logs when deferred probing is needed and provide more debug
info. Devices included this time:
- amlogic,meson_saradc
- capella,cm3605
- fsl,imx7d
- maxim,max1118
- maxim,max1241
- nxp,lpc18xx
- qcom,pm8xxxx-xoadc
- rockchip,saradc
- sharp,gp2ap002
- sterricson,ab8500
- ti,ads7950
* core - iio:buffer
- Fix a path where a ret value is not intialized.
* channel-mux
- Add support to mux core subsystem for a settling delay and use
it in the iio-channel-mux driver.
- Fix a few dt binding warnings.
* nxp,lpc18xx
- Convert to devm_ functions for all of probe and drop remove()
* st,lsm6dsx
- Suppress a warning due to lack of handling of an enum *_MAX entry
that is just there to get the size.
* st,stm32-adc
- Add generic channel binding, deprecating the old approach.
- Add nvmem support to get calibration data for the vrefint channel and
use it to perform such calibration.
- Add a binding for sample-time to the generic channel description as it
can be per channel.
* ti,adc128s052
- Use devm_ managed functions and drop remove()
* vti,sca3000
- Use sign_extend32() rather than opencoding.
* xilinx,xadc
- Drop irq field from state structure as now just used in probe.
* tag 'iio-for-5.16b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (36 commits)
dt-bindings: iio: frequency: add adrf6780 doc
iio: frequency: adrf6780: add support for ADRF6780
iio: chemical: scd4x: Add a scale for the co2 concentration reading
dt-bindings: iio: io-channel-mux: allow duplicate channel, labels
dt-bindings: iio: io-channel-mux: add optional #io-channel-cells
iio: adc: adc128s052: Simplify adc128_probe()
iio: multiplexer: iio-mux: Support settle-time-us property
dt-bindings: iio: io-channel-mux: Add property for settle time
mux: add support for delay after muxing
iio: adc: stm32-adc: use generic binding for sample-time
iio: adc: stm32-adc: add vrefint calibration support
iio: adc: stm32-adc: add support of internal channels
iio: adc: stm32-adc: add support of generic channels binding
iio: adc: stm32-adc: split channel init into several routines
dt-bindings: iio: stm32-adc: add nvmem support for vrefint internal channel
dt-bindings: iio: stm32-adc: add generic channel binding
iio: accel: sca3000: Use sign_extend32() instead of opencoding sign extension.
iio: xilinx-xadc: Remove `irq` field from state struct
iio: imu: st_lsm6dsx: Avoid potential array overflow in st_lsm6dsx_set_odr()
iio: light: gp2ap002: Make use of the helper function dev_err_probe()
...
As these are very late in the 5.15 cycle and non are particularly urgent,
they can wait for the merge window.
Key element in this set is Yang Yingliang has identified a number of
issues in error paths introduced recently when we added multiple
buffer support.
Other fixes:
* adi,ad5662
- Fix handling of i2c_master_send() return value.
* adi,ad5766
- Fix a wrong dt-property name that indicated wrong units and
did not mach the bindings.
- Associated 'fix' of the bindings example to have a possible scale.
* st,pressure-spi
- Add some missing entries to the spi_device_id table to ensure
auto-loading works.
* ti,tsc2046
- Fix a backwards comparison leading to a false dev_warn
-----BEGIN PGP SIGNATURE-----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=jYCH
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-5.16a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
First set of IIO fixes for the 5.16 cycle
As these are very late in the 5.15 cycle and non are particularly urgent,
they can wait for the merge window.
Key element in this set is Yang Yingliang has identified a number of
issues in error paths introduced recently when we added multiple
buffer support.
Other fixes:
* adi,ad5662
- Fix handling of i2c_master_send() return value.
* adi,ad5766
- Fix a wrong dt-property name that indicated wrong units and
did not mach the bindings.
- Associated 'fix' of the bindings example to have a possible scale.
* st,pressure-spi
- Add some missing entries to the spi_device_id table to ensure
auto-loading works.
* ti,tsc2046
- Fix a backwards comparison leading to a false dev_warn
* tag 'iio-fixes-for-5.16a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: buffer: Fix memory leak in iio_buffers_alloc_sysfs_and_mask()
iio: adc: tsc2046: fix scan interval warning
iio: core: fix double free in iio_device_unregister_sysfs()
iio: core: check return value when calling dev_set_name()
iio: buffer: Fix memory leak in iio_buffer_register_legacy_sysfs_groups()
iio: buffer: Fix double-free in iio_buffers_alloc_sysfs_and_mask()
iio: buffer: Fix memory leak in __iio_buffer_alloc_sysfs_and_mask()
iio: buffer: check return value of kstrdup_const()
iio: dac: ad5446: Fix ad5622_write() return value
Documentation:devicetree:bindings:iio:dac: Fix val
drivers: iio: dac: ad5766: Fix dt property name
iio: st_pressure_spi: Add missing entries SPI to device ID table
Turn 'adc128_probe()' into a full resource managed function to simplify the
code.
This way, the .remove function can be removed.
Doing so, the only 'spi_get_drvdata()' call is removed and the
corresponding 'spi_set_drvdata()' can be removed as well.
Suggested-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/4fa7fcc59c40e27af0569138d656c698a53dbd44.1630002770.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This driver supports both the legacy controller (am33xx) and the
extended one (am437x), so let's add a new compatible.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-46-miquel.raynal@bootlin.com
Without the scale, the values returned to the user are just a picture of
the input voltage against the full scale range of the ADC. We need to
provide the actual conversion factor to get milli-Volts values.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-45-miquel.raynal@bootlin.com
The lack of unit in the macro name kind of tricked me when I was
troubleshooting an issue. Physical constants should always get a unit.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-44-miquel.raynal@bootlin.com
Move the checks over the delays provided in the device tree to the
location where these values are read to clarify where they come from.
There are no functional changes besides the device structure used to
display the warnings: let's use the ADC instead of the MFD device.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-43-miquel.raynal@bootlin.com
Gotos jumping to a return statement are not really useful, drop them.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-42-miquel.raynal@bootlin.com
These warnings are reported by checkpatch.pl essentially.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-41-miquel.raynal@bootlin.com
Drop the text license and replace it with an equivalent SPDX license tag
identifier which also matches the MODULE_LICENSE("GPL").
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-40-miquel.raynal@bootlin.com
At least on a am4372, a simple:
$ cat /sys/bus/iio/devices/iio\:deviceX/in_voltage*_raw
can stall forever. It seems that it comes from the fact that the
internal state machine does not have enough time to return to its idle
state in this situation before receiving another request, leading to an
internal stall.
Add a tiadc_wait_idle() helper to ensure no new conversion is requested
while the FSM is still busy.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-39-miquel.raynal@bootlin.com
This bit is common to all devices (ADC, Touchscreen, Magnetic reader) so
make it clear that it can be used from any location by operating a
mechanical rename:
s/CNTRLREG_TSCSSENB/CNTRLREG_SSENB/
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-31-miquel.raynal@bootlin.com
Clearly define the maximum open delay and sample delay. Use these
definitions in place of a mask (which works because this is the first
field in the register) and an open-coded value. While at it reword a
little bit the error messages to make them look clearer and similar.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-29-miquel.raynal@bootlin.com
Clean the ti_am335x_tscadc.h header by:
* converting masks to GENMASK()
* converting regular shifts to BIT()
* using FIELD_PREP() when relevant
Sometimes reorder the lines to be able to use the relevant bitmask.
Mind the s/%d/%ld/ change in a log due to the type change following the
use of FIELD_PREP() in the header.
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-28-miquel.raynal@bootlin.com
Add st,min-sample-time-nsecs to channel generic binding.
Sample time can be defined par channel node. If a channel
is configured as differential, the same sample time applies
for both inputs.
Keep support of legacy st,min-sample-time-nsecs property
for backward compatibility.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20211014131228.4692-8-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support of vrefint calibration.
If a channel is labeled as vrefint, get vrefint calibration
from non volatile memory for this channel.
vrefint channel is exposed as a processed channel returning
the actual value of vrefp:
vrefp = 3.3 x vrefint_cal / vrefint_data
A conversion on vrefint channel allows to update scale
factor according to vrefint deviation, compared to vrefint
calibration value.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20211014131228.4692-7-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support of ADC2 internal channels VDDCORE, VREFINT and VBAT.
The reserved label name "vddcore", "vrefint" and "vbat" must
be used in Device Tree channel node, to enable the corresponding
internal channel.
Note: This patch does not provide support of internal channels
for F4 and H7.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20211014131228.4692-6-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support of generic IIO channel binding:
./devicetree/bindings/iio/adc/adc.yaml
Keep support of st,adc-channels and st,adc-diff-channels
for backward compatibility.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20211014131228.4692-5-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Split stm32_adc_chan_of_init channel initialization function into
several routines to increase readability and prepare channel
generic binding handling.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20211014131228.4692-4-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Since commit 2a9685d1a3 ("iio: adc: xilinx: use more devres helpers and
remove remove()") the `irq` field from XADC driver state struct is only
used in the `probe()` function.
Use the local `irq` variable throughout the `probe()` function and remove
the now unused field from the state struct.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20211017121551.24063-1-lars@metafoo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20211008092858.495-9-caihuoqing@baidu.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20211008092858.495-8-caihuoqing@baidu.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
BTW, change the return value from 'ENXIO' to 'ENODEV',
perfer ENODEV which means no such device.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211008092858.495-7-caihuoqing@baidu.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> #Meson8b Odroid-C1
Link: https://lore.kernel.org/r/20211008092858.495-6-caihuoqing@baidu.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20211008092858.495-5-caihuoqing@baidu.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20211008092858.495-4-caihuoqing@baidu.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20211008092858.495-3-caihuoqing@baidu.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20211008092858.495-2-caihuoqing@baidu.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20211008092858.495-1-caihuoqing@baidu.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The remove function and the goto sections are not necessary if devm
functions are used.
Convert device register to devm version. Add hook functions to release
device resources, and use them inside probe with devm_add_action,
which will release resources on driver detach.
To maintain the order of which device resources were released/reseted,
register the hook functions as soon as resources are obtained/initialized.
Since devres actions are called on driver detach, the remove
function and the error-handling goto sections are no longer necessary.
Signed-off-by: André Gustavo Nakagomi Lopez <andregnl@usp.br>
Link: https://lore.kernel.org/r/YWnMsGlc/I35gYvy@Andryuu.br
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Counter subsystem changes now sent separately.
This has been a busy cycle, so lots here and a few more stragglers to
come next week.
Big new feature in this cycle is probably output buffer support.
This has been in the works for a very long time so it's great to see
Mihail pick up the challenge and build upon his predecessors work to finally
bring this feature to mainline.
New device support
------------------
* adi,adxl313
- New driver and dt bindings for this low power accelerometer.
* adi,adxl355
- New driver and dt bindings for this accelerometer.
- Later series adds buffer support.
* asahi-kasei,ak8975
- Minor additions to driver to support ak09916
* aspeed,aspeed-adc
- Substantial rework plus feature additions to add support for the
ast2600 including a new dt bindings doc.
* atmel,at91_sama5d2
- Rework and support introduced for the sama7g5 parts.
* maxim,max31865
- New driver and bindings for this RTD temperature sensor chip.
* nxp,imx8qxp
- New driver and bindings for the ADC found on the i.MX 8QuadXPlus Soc.
* senseair,sunrise
- New driver and bindings for this family of carbon dioxide gas sensors.
* sensiron,scd4x
- New driver and bindings for this carbon dioxide gas sensor.
New features
------------
* Output buffer support. Works in a similar fashion to input buffers, but
in this case userspace pushes data into the kfifo which is then drained
to the device when a trigger occurs. Support added to the ad5766 DAC
driver.
* Core, devm_iio_map_array_register() to avoid need for
devm_add_action_or_reset() based cleanup in fully managed allocation
drivers.
* Core iio_push_to_buffers_with_ts_unaligned() function to safely handle a
few drivers where it really hard to ensure the correct data alignment in
an iio_push_to_buffers_with_timestamp() call. Note this uses a bounce
buffer so should be avoided whenever possible. Used in the ti,adc108s102,
invense,mpu3050 and adi,adis16400. This closes the last known set
of drivers with alignment issues at this interface.
* maxim,max1027
- Substantial rework to this driver main target of which was supporting
use of other triggers than it's own EOC interrupt.
- Transfer optimization.
* nxp,fxls8962af
- Threshold even support including using it as a wakeup source.
Cleanups, minor fixes etc
-------------------------
Chances of a common type to multiple drivers:
* devm_ conversion and drop of .remove() callbacks in:
- adi,ad5064
- adi,ad7291
- adi,ad7303
- adi,ad7746
- adi,ad9832
- adi,adis16080
- dialog,da9150-gpadc
- intel,mrfld_adc
- marvell,berlin2
- maxim,max1363
- maxim,max44000
- nuvoton,nau7802
- st_sensors (includes a lot of rework!)
- ti,ads8344
- ti,lp8788
* devm_platform_ioremap_resource() used to reduce boilerplate
- cirrus,ep93xx
- rockchip,saradc
- stm,stm32-dac
* Use dev_err_probe() in more places to both not print on deferred probe and
ensure a reason for the deferral is available for debug purposes.
- adi,ad8801
- capella,cm36651
- linear,ltc1660
- maxim,ds4424
- maxim,max5821
- microchip,mcp4922
- nxp,lpc18xx
- onnn,noa1305
- st,lsm9ds0
- st,st_sensors
- st,stm32-dac
- ti,afe4403
- ti,afe4404
- ti,dac7311
* Drop error returns in SPI and I2C remove() functions as they are ignored and
long term plan is to change these all over to returning void. In some cases
these patches just make it 'obvious' they always return 0 where it was the
case before but not easy to tell.
- adi,ad5380
- adi,ad5446
- adi,ad5686
- adi,ad5592r
- bosch,bma400
- bosch,bmc150
- fsl,mma7455
- honeywell,hmc5843
- kionix,kxsd9
- maxim,max5487
- meas,ms5611
- ti,afe4403
Driver specific changes
* adi,ad5770r
- Bring driver inline with documented bindings.
* adi,ad7746
- Trivial style fix
* adi,ad7949
- Express some magic values as the underlying parts via new #defines.
- Make it work with SPI controllers that don't support 14 or 16 bit messages
- Support selection of voltage reference from dt including expanding the
dt-bindings to cover this new functionality.
* adi,ad799x
- Implement selection of external reference voltage on AD7991, AD7995 and
AD7999.
- Add missing dt-bindings doc for devices supported by this driver.
* adi,adislib
- Move interrupt startup to better location in startup flow.
- Handle devices that cannot mask/unmask the drdy pin and must instead mask
at the interrupt controller. Applies to the adis16460 and adis16475 from
which we then drop equivalent code.
* adi,ltc2983
- Add support for optional reset pin.
- Fail to probe if no channels specified in dt binding.
* asahi-kasei,ak8975
- dt-binding additions of missing vid-supply regulator.
* aspeed,aspeed-adc
- Typo fix.
* fsl,mma7660
- Mark acpi_device_id table __maybe_unused to avoid build warning.
* fsl,imx25-gcq
- Avoid initializing regulators that aren't used.
* invensense,mpu3050
- Drop a dead protection against a clash with the old input driver.
* invensense,mpu6050
- Rework code to not use strcpy() and hence avoid possibility of wrong sized
buffers. Note this wasn't a bug, but the new code is a lot more readable.
- Mark acpi_device_id table __maybe_unused to avoid build warning.
* kionix,kxcjk1013
- dt-binding addition to note it supports interrupts.
* marvell,berlin2-adc
- Enable COMPILE_TEST building.
* maxim,max1027
- Avoid returning success in an error path.
* nxp,imx8qxp
- Fix warning when runtime pm not enabled via __maybe_unused.
* ricoh,rn5t618
- Use the new devm_iio_map_array_register() instead of open coding the same.
* samsung,exynos_adc
- Improve kconfig help text.
* st,lsm6dsx
- Move max_fifo_size into the fifo_ops structure where the other configuration
parameters are found.
* st,st_sensors:
- Reorder to ensure we turn the power off after removing userspace interfaces.
* senseair,sunrise
- Add missing I2C dependency.
* ti,twl6030
- Small code tidy up.
-----BEGIN PGP SIGNATURE-----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=htmG
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.16a-split-take4' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
First set of IIO new device and feature support for the 5.16 cycle
Counter subsystem changes now sent separately.
This has been a busy cycle, so lots here and a few more stragglers to
come next week.
Big new feature in this cycle is probably output buffer support.
This has been in the works for a very long time so it's great to see
Mihail pick up the challenge and build upon his predecessors work to finally
bring this feature to mainline.
New device support
------------------
* adi,adxl313
- New driver and dt bindings for this low power accelerometer.
* adi,adxl355
- New driver and dt bindings for this accelerometer.
- Later series adds buffer support.
* asahi-kasei,ak8975
- Minor additions to driver to support ak09916
* aspeed,aspeed-adc
- Substantial rework plus feature additions to add support for the
ast2600 including a new dt bindings doc.
* atmel,at91_sama5d2
- Rework and support introduced for the sama7g5 parts.
* maxim,max31865
- New driver and bindings for this RTD temperature sensor chip.
* nxp,imx8qxp
- New driver and bindings for the ADC found on the i.MX 8QuadXPlus Soc.
* senseair,sunrise
- New driver and bindings for this family of carbon dioxide gas sensors.
* sensiron,scd4x
- New driver and bindings for this carbon dioxide gas sensor.
New features
------------
* Output buffer support. Works in a similar fashion to input buffers, but
in this case userspace pushes data into the kfifo which is then drained
to the device when a trigger occurs. Support added to the ad5766 DAC
driver.
* Core, devm_iio_map_array_register() to avoid need for
devm_add_action_or_reset() based cleanup in fully managed allocation
drivers.
* Core iio_push_to_buffers_with_ts_unaligned() function to safely handle a
few drivers where it really hard to ensure the correct data alignment in
an iio_push_to_buffers_with_timestamp() call. Note this uses a bounce
buffer so should be avoided whenever possible. Used in the ti,adc108s102,
invense,mpu3050 and adi,adis16400. This closes the last known set
of drivers with alignment issues at this interface.
* maxim,max1027
- Substantial rework to this driver main target of which was supporting
use of other triggers than it's own EOC interrupt.
- Transfer optimization.
* nxp,fxls8962af
- Threshold even support including using it as a wakeup source.
Cleanups, minor fixes etc
-------------------------
Chances of a common type to multiple drivers:
* devm_ conversion and drop of .remove() callbacks in:
- adi,ad5064
- adi,ad7291
- adi,ad7303
- adi,ad7746
- adi,ad9832
- adi,adis16080
- dialog,da9150-gpadc
- intel,mrfld_adc
- marvell,berlin2
- maxim,max1363
- maxim,max44000
- nuvoton,nau7802
- st_sensors (includes a lot of rework!)
- ti,ads8344
- ti,lp8788
* devm_platform_ioremap_resource() used to reduce boilerplate
- cirrus,ep93xx
- rockchip,saradc
- stm,stm32-dac
* Use dev_err_probe() in more places to both not print on deferred probe and
ensure a reason for the deferral is available for debug purposes.
- adi,ad8801
- capella,cm36651
- linear,ltc1660
- maxim,ds4424
- maxim,max5821
- microchip,mcp4922
- nxp,lpc18xx
- onnn,noa1305
- st,lsm9ds0
- st,st_sensors
- st,stm32-dac
- ti,afe4403
- ti,afe4404
- ti,dac7311
* Drop error returns in SPI and I2C remove() functions as they are ignored and
long term plan is to change these all over to returning void. In some cases
these patches just make it 'obvious' they always return 0 where it was the
case before but not easy to tell.
- adi,ad5380
- adi,ad5446
- adi,ad5686
- adi,ad5592r
- bosch,bma400
- bosch,bmc150
- fsl,mma7455
- honeywell,hmc5843
- kionix,kxsd9
- maxim,max5487
- meas,ms5611
- ti,afe4403
Driver specific changes
* adi,ad5770r
- Bring driver inline with documented bindings.
* adi,ad7746
- Trivial style fix
* adi,ad7949
- Express some magic values as the underlying parts via new #defines.
- Make it work with SPI controllers that don't support 14 or 16 bit messages
- Support selection of voltage reference from dt including expanding the
dt-bindings to cover this new functionality.
* adi,ad799x
- Implement selection of external reference voltage on AD7991, AD7995 and
AD7999.
- Add missing dt-bindings doc for devices supported by this driver.
* adi,adislib
- Move interrupt startup to better location in startup flow.
- Handle devices that cannot mask/unmask the drdy pin and must instead mask
at the interrupt controller. Applies to the adis16460 and adis16475 from
which we then drop equivalent code.
* adi,ltc2983
- Add support for optional reset pin.
- Fail to probe if no channels specified in dt binding.
* asahi-kasei,ak8975
- dt-binding additions of missing vid-supply regulator.
* aspeed,aspeed-adc
- Typo fix.
* fsl,mma7660
- Mark acpi_device_id table __maybe_unused to avoid build warning.
* fsl,imx25-gcq
- Avoid initializing regulators that aren't used.
* invensense,mpu3050
- Drop a dead protection against a clash with the old input driver.
* invensense,mpu6050
- Rework code to not use strcpy() and hence avoid possibility of wrong sized
buffers. Note this wasn't a bug, but the new code is a lot more readable.
- Mark acpi_device_id table __maybe_unused to avoid build warning.
* kionix,kxcjk1013
- dt-binding addition to note it supports interrupts.
* marvell,berlin2-adc
- Enable COMPILE_TEST building.
* maxim,max1027
- Avoid returning success in an error path.
* nxp,imx8qxp
- Fix warning when runtime pm not enabled via __maybe_unused.
* ricoh,rn5t618
- Use the new devm_iio_map_array_register() instead of open coding the same.
* samsung,exynos_adc
- Improve kconfig help text.
* st,lsm6dsx
- Move max_fifo_size into the fifo_ops structure where the other configuration
parameters are found.
* st,st_sensors:
- Reorder to ensure we turn the power off after removing userspace interfaces.
* senseair,sunrise
- Add missing I2C dependency.
* ti,twl6030
- Small code tidy up.
* tag 'iio-for-5.16a-split-take4' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (148 commits)
iio: imx8qxp-adc: mark PM functions as __maybe_unused
iio: pressure: ms5611: Make ms5611_remove() return void
iio: potentiometer: max5487: Don't return an error in .remove()
iio: magn: hmc5843: Make hmc5843_common_remove() return void
iio: health: afe4403: Don't return an error in .remove()
iio: dac: ad5686: Make ad5686_remove() return void
iio: dac: ad5592r: Make ad5592r_remove() return void
iio: dac: ad5446: Make ad5446_remove() return void
iio: dac: ad5380: Make ad5380_remove() return void
iio: accel: mma7455: Make mma7455_core_remove() return void
iio: accel: kxsd9: Make kxsd9_common_remove() return void
iio: accel: bmi088: Make bmi088_accel_core_remove() return void
iio: accel: bmc150: Make bmc150_accel_core_remove() return void
iio: accel: bma400: Make bma400_remove() return void
drivers:iio:dac:ad5766.c: Add trigger buffer
iio: triggered-buffer: extend support to configure output buffers
iio: kfifo-buffer: Add output buffer support
iio: Add output buffer support
iio: documentation: Document scd4x calibration use
drivers: iio: chemical: Add support for Sensirion SCD4x CO2 sensor
...
Without CONFIG_PM_SLEEP, the runtime suspend/resume functions
are unused, producing a warning:
drivers/iio/adc/imx8qxp-adc.c:433:12: error: 'imx8qxp_adc_runtime_resume' defined but not used [-Werror=unused-function]
433 | static int imx8qxp_adc_runtime_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/iio/adc/imx8qxp-adc.c:419:12: error: 'imx8qxp_adc_runtime_suspend' defined but not used [-Werror=unused-function]
419 | static int imx8qxp_adc_runtime_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Mark them as __maybe_unused to shut up the compiler.
Fixes: 1e23dcaa1a ("iio: imx8qxp-adc: Add driver support for NXP IMX8QXP ADC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20211013144338.2261316-1-arnd@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Now that output (kfifo) buffers are supported, we need to extend the
{devm_}iio_triggered_buffer_setup_ext() parameter list to take a direction
parameter.
This allows us to attach an output triggered buffer to a DAC device.
Unfortunately it's a bit difficult to add another macro to avoid changing 5
drivers where {devm_}iio_triggered_buffer_setup_ext() is used.
Well, it's doable, but may not be worth the trouble vs just updating all
these 5 drivers.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Mihail Chindris <mihail.chindris@analog.com>
Link: https://lore.kernel.org/r/20211007080035.2531-4-mihail.chindris@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Make use of the AD7991_REF_SEL bit and support using the external
reference voltage if 'vref-supply' is present. Use VCC voltage supply
as reference if no extra reference is supplied.
Signed-off-by: Florian Boor <florian.boor@kernelconcepts.de>
Link: https://lore.kernel.org/r/20210930104249.2924336-1-florian.boor@kernelconcepts.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Return -ETIMEDOUT on timeout instead of success.
Fixes: 1f7b4048b3 ("iio: adc: max1027: Use the EOC IRQ when populated for single reads")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the newly introduce iio_push_to_buffers_with_ts_unaligned() function
to ensure a bounce buffer is used to provide the required alignment and
space padding needed by the IIO core which requires the timestamp
is naturally aligned. There will be a performance cost to this change
but it will ensure the driver works on platforms that do not support
unaligned 8 byte assignments, and with consumer drivers that may
assume natural alignment of the timestamp.
Issue found as part of an audit of all calls to
iio_push_to_buffers_with_timestamp()
Fixes: 7e87d11c9b ("iio: adc: Add support for TI ADC108S102 and ADC128S102")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/20210613151039.569883-3-jic23@kernel.org
This is a simple conversion for to device-managed with using
devm_request_threaded_irq(), disabling the regulator via a
devm_add_action_or_reset() hook and finally using
devm_iio_device_register().
The i2c_set_clientdata() call is removed as it becomes redundant after this
change.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210926194315.7742-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Otherwise most build checks will omit this driver from a compile-test due
to it's dependency only on the BERLIN_ARCH symbol.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210926192642.4051329-2-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This driver requires only a devm_add_action_or_reset() hook for the
power-down of the device, and then devm_iio_device_register() can be used
directly.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210926192642.4051329-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This driver already hooks a similar unwind callback via
devm_add_action_or_reset().
They pretty much do the same thing, so this change converts it to the
devm_iio_map_array_register().
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20210926162859.3567685-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
For this conversion, the 2 regulators (being enabled) require each a
devm_add_action_or_reset() hook registration.
For the other functions, there are device-managed variants.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210926162110.3536436-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This is a trivial conversion to device-managed functions.
The mutex_destroy() calls are redundant, as the data will be free'd anyway.
And the IRQ and IIO register functions both have device-managed
equivalents.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210926154932.3287590-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This change converts the probe of this driver to use device-managed
functions only, which means that the remove hook can be removed.
The remove hook has only 2 calls to iio_device_unregister() and
iio_map_array_unregister(). Both these can now be done via devm register
functions, now that there's also a devm_iio_map_array_register() function.
The platform_set_drvdata() can also be removed now.
This change also removes the error print for when the iio_device_register()
call fails. This isn't required now.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210903072917.45769-6-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This change converts the probe of this driver to use device-managed
functions only, which means that the remove hook can be removed.
The remove hook has only 2 calls to iio_device_unregister() and
iio_map_array_unregister(). Both these can now be done via devm register
functions, now that there's also a devm_iio_map_array_register() function.
The platform_set_drvdata() can also be removed now.
This change also removes the error print for when the iio_device_register()
call fails. This isn't required now.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210903072917.45769-5-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This change converts the probe of this driver to use device-managed
functions only, which means that the remove hook can be removed.
The remove hook has only 2 calls to iio_device_unregister() and
iio_map_array_unregister(). Both these can now be done via devm register
functions, now that there's also a devm_iio_map_array_register() function.
The platform_set_drvdata() can also be removed now.
This change also removes the error print for when the iio_device_register()
call fails. This isn't required now.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210903072917.45769-4-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The only call in the remove hook is the iio_map_array_unregister() call.
Since we have a devm_iio_map_array_register() function now, we can use that
and remove the remove hook entirely.
The IIO device was registered with the devm_iio_device_register() prior to
this change.
Also, the platform_set_drvdata() can be removed now, since it was used only
in the remove hook.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210903072917.45769-3-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The driver tries to initialize all possible regulators from the DT, then
match the external regulators with each channel and then release all unused
regulators.
We can change the logic a bit to initialize regulators only when at least
one channel needs them.
This change creates a mx25_gcq_ext_regulator_setup() function that is
called only for the external regulators. If there's already a reference to
an external regulator, the function will just exit early with no error.
This way, the driver doesn't need to keep any track of these regulators
during init.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210625074325.9237-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
External triggers do not necessarily need the EOC interrupt to be
populated to work properly. The end of conversion status may either come
from an interrupt or from a sufficient enough extra delay. IRQs are not
mandatory so move the triggered buffer setup out of the IRQ condition
and add the logic to wait enough time for all the requested conversions
to be in the device's FIFO.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20210921115408.66711-17-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There is no reason to limit this driver to its internal trigger. The
only difference being, when using an external trigger, the sample
conversion must be manually started.
Drop the ->validate_trigger() hook in order to allow other triggers to
be bound.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20210921115408.66711-16-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
So far the End-Of-Conversion interrupt was only used in conjunction with
the internal trigger to process the data. Let's extend the use of this
interrupt handler to support regular single-shot conversions as well.
Doing so requires writing our own hard IRQ handler. This handler has to
check if buffers are enabled or not:
*** Buffers disabled condition ***
This means the user requested a single conversion and the sample is
ready to be retrieved.
-> This implies adding the relevant completion boilerplate.
*** Buffers enabled condition ***
Triggers are used. So far there is only support for the internal
trigger but this trigger might soon be attached to another device as
well so it is the core duty to decide which handler to call in order
to process the data. The core will decide to either:
* Call the internal trigger handler which will extract the data that
is already present in the ADC FIFOs
or
* Call the trigger handler of another driver when using this trigger
with another device, even though this call will be slightly delayed
by the fact that the max1027 IRQ is a data-ready interrupt rather
than a real trigger:
-> The new handler will manually inform the core about the trigger
having transitioned by directly calling iio_trigger_poll() (which
iio_trigger_generic_data_rdy_poll() initially did).
In order for the handler to be "source" agnostic, we also need to change
the private pointer and provide the IIO device instead of the trigger
object.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20210921115408.66711-15-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The threaded handler is not populated, this means there is nothing
running in process context so let's switch to the regular
devm_request_irq() call instead.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20210921115408.66711-14-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
For now this helper only waits for the maximum duration of a single
conversion.
In practice, a "temperature measurement" will take twice this
time because it will also carry another analog conversion but as here we
will only care about the temperature conversion which happens first, we
can still only wait for a single sample and get the right data.
This helper will soon be improved to properly handle the end of
conversion interrupt as well as a higher number of samples.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20210921115408.66711-13-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Create a max1027_read_scan() helper which will make clearer the future IRQ
handler updates (no functional change).
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20210921115408.66711-12-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When hardware buffers are enabled (the cnvst pin being the trigger), one
should not mess with the device state by requesting a single channel
read.
There is already a iio_buffer_enabled() check in *_read_single_value()
to merely prevent this situation but the check is inconsistent since
buffers can be enabled after the if clause anyway. Instead, use the core
mutex by calling iio_device_claim/release_direct_mode().
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20210921115408.66711-11-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
We don't expect the (hardware) cnvst trigger to be enabled at boot time,
this is a user choice made in sysfs and there is a dedicated callback to
enable/disable this trigger. Hence, we can just ensure it is disabled in
the probe at initialization time and then assume that whenever a
->read_raw() call happens, the trigger has been disabled and conversions
will start on register write.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20210921115408.66711-9-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The call to max1027_enable_trigger() is the same in both cases thanks to
the 'state' variable, so factorize a little bit to simplify the code and
explain why we call this helper.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20210921115408.66711-8-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There are two ways to physically trigger a conversion:
- A falling edge on the cnvst pin
- A write operation on the conversion register
Let's create a helper for this.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210921115408.66711-7-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Make it clear that the *_set_trigger_state() hook is responsible for
cnvst based conversions by renaming the helper. This may avoid
confusions with software trigger support that is going to be
introduced.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210921115408.66711-6-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Provide a list of ->available_scan_masks which match the device's
capabilities. Basically, these devices are able to scan from 0 to N, N
being the highest voltage channel requested by the user. The temperature
can be included or not, but cannot be retrieved alone.
The consequence is, instead of reading and pushing to the IIO buffers
all channels each time, the "minimum" number of channels will be scanned
and pushed based on the ->active_scan_mask.
For example, if the user wants channels 1, 4 and 5, all channels from
0 to 5 will be scanned and pushed to the IIO buffers. The core will then
filter out the unneeded samples based on the ->active_scan_mask that has
been selected and only channels 1, 4 and 5 will be available to the user
in the shared buffer.
Provide a comment in the code explaining this logic.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20210921115408.66711-5-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Memory allocation errors automatically trigger the right logs, no need
to have our own.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210921115408.66711-3-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
