forked from Minki/linux
ahci: Add support for Cavium's ThunderX host controller
This patch adds support for Cavium's ThunderX host controller. The controller resides on the SoC and is a AHCI compatible SATA controller with one port, compliant with Serial ATA 3.1 and AHCI Revision 1.31. There can exists multiple SATA controllers on the SoC. The controller depends on MSI-X support since the PCI ECAM controller on the SoC does not implement MSI nor lagacy intx interrupt support. Thus, during device initialization, if MSI fails MSI-X will be used to enable the device's interrupts. The controller uses non-standard BAR0 for its register range. The already existing device lookup (vendor and device id) that is already implemented for other host controllers is used to change the PCI BAR. Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Tejun Heo <tj@kernel.org>
This commit is contained in:
parent
ee2aad42e4
commit
b7ae128d72
@ -53,6 +53,7 @@
|
||||
|
||||
enum {
|
||||
AHCI_PCI_BAR_STA2X11 = 0,
|
||||
AHCI_PCI_BAR_CAVIUM = 0,
|
||||
AHCI_PCI_BAR_ENMOTUS = 2,
|
||||
AHCI_PCI_BAR_STANDARD = 5,
|
||||
};
|
||||
@ -1374,11 +1375,13 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
|
||||
dev_info(&pdev->dev,
|
||||
"PDC42819 can only drive SATA devices with this driver\n");
|
||||
|
||||
/* Both Connext and Enmotus devices use non-standard BARs */
|
||||
/* Some devices use non-standard BARs */
|
||||
if (pdev->vendor == PCI_VENDOR_ID_STMICRO && pdev->device == 0xCC06)
|
||||
ahci_pci_bar = AHCI_PCI_BAR_STA2X11;
|
||||
else if (pdev->vendor == 0x1c44 && pdev->device == 0x8000)
|
||||
ahci_pci_bar = AHCI_PCI_BAR_ENMOTUS;
|
||||
else if (pdev->vendor == 0x177d && pdev->device == 0xa01c)
|
||||
ahci_pci_bar = AHCI_PCI_BAR_CAVIUM;
|
||||
|
||||
/*
|
||||
* The JMicron chip 361/363 contains one SATA controller and one
|
||||
|
Loading…
Reference in New Issue
Block a user