forked from Minki/linux
[ARM] pxa: move FICP register definitions into pxaficp_ir.c
Signed-off-by: Eric Miao <eric.miao@marvell.com>
This commit is contained in:
parent
013132cae8
commit
b40ddf5758
@ -369,52 +369,9 @@
|
||||
|
||||
|
||||
/*
|
||||
* Fast Infrared Communication Port
|
||||
* Fast Infrared Communication Port - moved into drivers/net/irda/pxaficp_ir.c
|
||||
*/
|
||||
|
||||
#define FICP __REG(0x40800000) /* Start of FICP area */
|
||||
#define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */
|
||||
#define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */
|
||||
#define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */
|
||||
#define ICDR __REG(0x4080000c) /* ICP Data Register */
|
||||
#define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */
|
||||
#define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */
|
||||
|
||||
#define ICCR0_AME (1 << 7) /* Address match enable */
|
||||
#define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */
|
||||
#define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */
|
||||
#define ICCR0_RXE (1 << 4) /* Receive enable */
|
||||
#define ICCR0_TXE (1 << 3) /* Transmit enable */
|
||||
#define ICCR0_TUS (1 << 2) /* Transmit FIFO underrun select */
|
||||
#define ICCR0_LBM (1 << 1) /* Loopback mode */
|
||||
#define ICCR0_ITR (1 << 0) /* IrDA transmission */
|
||||
|
||||
#define ICCR2_RXP (1 << 3) /* Receive Pin Polarity select */
|
||||
#define ICCR2_TXP (1 << 2) /* Transmit Pin Polarity select */
|
||||
#define ICCR2_TRIG (3 << 0) /* Receive FIFO Trigger threshold */
|
||||
#define ICCR2_TRIG_8 (0 << 0) /* >= 8 bytes */
|
||||
#define ICCR2_TRIG_16 (1 << 0) /* >= 16 bytes */
|
||||
#define ICCR2_TRIG_32 (2 << 0) /* >= 32 bytes */
|
||||
|
||||
#ifdef CONFIG_PXA27x
|
||||
#define ICSR0_EOC (1 << 6) /* DMA End of Descriptor Chain */
|
||||
#endif
|
||||
#define ICSR0_FRE (1 << 5) /* Framing error */
|
||||
#define ICSR0_RFS (1 << 4) /* Receive FIFO service request */
|
||||
#define ICSR0_TFS (1 << 3) /* Transnit FIFO service request */
|
||||
#define ICSR0_RAB (1 << 2) /* Receiver abort */
|
||||
#define ICSR0_TUR (1 << 1) /* Trunsmit FIFO underun */
|
||||
#define ICSR0_EIF (1 << 0) /* End/Error in FIFO */
|
||||
|
||||
#define ICSR1_ROR (1 << 6) /* Receiver FIFO underrun */
|
||||
#define ICSR1_CRE (1 << 5) /* CRC error */
|
||||
#define ICSR1_EOF (1 << 4) /* End of frame */
|
||||
#define ICSR1_TNF (1 << 3) /* Transmit FIFO not full */
|
||||
#define ICSR1_RNE (1 << 2) /* Receive FIFO not empty */
|
||||
#define ICSR1_TBY (1 << 1) /* Tramsmiter busy flag */
|
||||
#define ICSR1_RSY (1 << 0) /* Recevier synchronized flag */
|
||||
|
||||
|
||||
/*
|
||||
* Real Time Clock
|
||||
*/
|
||||
|
@ -26,6 +26,48 @@
|
||||
#include <mach/irda.h>
|
||||
#include <mach/pxa-regs.h>
|
||||
|
||||
#define FICP __REG(0x40800000) /* Start of FICP area */
|
||||
#define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */
|
||||
#define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */
|
||||
#define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */
|
||||
#define ICDR __REG(0x4080000c) /* ICP Data Register */
|
||||
#define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */
|
||||
#define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */
|
||||
|
||||
#define ICCR0_AME (1 << 7) /* Address match enable */
|
||||
#define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */
|
||||
#define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */
|
||||
#define ICCR0_RXE (1 << 4) /* Receive enable */
|
||||
#define ICCR0_TXE (1 << 3) /* Transmit enable */
|
||||
#define ICCR0_TUS (1 << 2) /* Transmit FIFO underrun select */
|
||||
#define ICCR0_LBM (1 << 1) /* Loopback mode */
|
||||
#define ICCR0_ITR (1 << 0) /* IrDA transmission */
|
||||
|
||||
#define ICCR2_RXP (1 << 3) /* Receive Pin Polarity select */
|
||||
#define ICCR2_TXP (1 << 2) /* Transmit Pin Polarity select */
|
||||
#define ICCR2_TRIG (3 << 0) /* Receive FIFO Trigger threshold */
|
||||
#define ICCR2_TRIG_8 (0 << 0) /* >= 8 bytes */
|
||||
#define ICCR2_TRIG_16 (1 << 0) /* >= 16 bytes */
|
||||
#define ICCR2_TRIG_32 (2 << 0) /* >= 32 bytes */
|
||||
|
||||
#ifdef CONFIG_PXA27x
|
||||
#define ICSR0_EOC (1 << 6) /* DMA End of Descriptor Chain */
|
||||
#endif
|
||||
#define ICSR0_FRE (1 << 5) /* Framing error */
|
||||
#define ICSR0_RFS (1 << 4) /* Receive FIFO service request */
|
||||
#define ICSR0_TFS (1 << 3) /* Transnit FIFO service request */
|
||||
#define ICSR0_RAB (1 << 2) /* Receiver abort */
|
||||
#define ICSR0_TUR (1 << 1) /* Trunsmit FIFO underun */
|
||||
#define ICSR0_EIF (1 << 0) /* End/Error in FIFO */
|
||||
|
||||
#define ICSR1_ROR (1 << 6) /* Receiver FIFO underrun */
|
||||
#define ICSR1_CRE (1 << 5) /* CRC error */
|
||||
#define ICSR1_EOF (1 << 4) /* End of frame */
|
||||
#define ICSR1_TNF (1 << 3) /* Transmit FIFO not full */
|
||||
#define ICSR1_RNE (1 << 2) /* Receive FIFO not empty */
|
||||
#define ICSR1_TBY (1 << 1) /* Tramsmiter busy flag */
|
||||
#define ICSR1_RSY (1 << 0) /* Recevier synchronized flag */
|
||||
|
||||
#define IrSR_RXPL_NEG_IS_ZERO (1<<4)
|
||||
#define IrSR_RXPL_POS_IS_ZERO 0x0
|
||||
#define IrSR_TXPL_NEG_IS_ZERO (1<<3)
|
||||
|
Loading…
Reference in New Issue
Block a user