mmc: core: Factor out mmc_host_set_uhs_voltage()
Factor out mmc_host_set_uhs_voltage() so it can be reused. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit is contained in:
		
							parent
							
								
									cb39f61e9b
								
							
						
					
					
						commit
						3f496afb6f
					
				| @ -1672,11 +1672,33 @@ int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage) | ||||
| 
 | ||||
| } | ||||
| 
 | ||||
| int mmc_host_set_uhs_voltage(struct mmc_host *host) | ||||
| { | ||||
| 	u32 clock; | ||||
| 
 | ||||
| 	/*
 | ||||
| 	 * During a signal voltage level switch, the clock must be gated | ||||
| 	 * for 5 ms according to the SD spec | ||||
| 	 */ | ||||
| 	clock = host->ios.clock; | ||||
| 	host->ios.clock = 0; | ||||
| 	mmc_set_ios(host); | ||||
| 
 | ||||
| 	if (mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180)) | ||||
| 		return -EAGAIN; | ||||
| 
 | ||||
| 	/* Keep clock gated for at least 10 ms, though spec only says 5 ms */ | ||||
| 	mmc_delay(10); | ||||
| 	host->ios.clock = clock; | ||||
| 	mmc_set_ios(host); | ||||
| 
 | ||||
| 	return 0; | ||||
| } | ||||
| 
 | ||||
| int mmc_set_uhs_voltage(struct mmc_host *host, u32 ocr) | ||||
| { | ||||
| 	struct mmc_command cmd = {}; | ||||
| 	int err = 0; | ||||
| 	u32 clock; | ||||
| 
 | ||||
| 	/*
 | ||||
| 	 * If we cannot switch voltages, return failure so the caller | ||||
| @ -1708,15 +1730,8 @@ int mmc_set_uhs_voltage(struct mmc_host *host, u32 ocr) | ||||
| 		err = -EAGAIN; | ||||
| 		goto power_cycle; | ||||
| 	} | ||||
| 	/*
 | ||||
| 	 * During a signal voltage level switch, the clock must be gated | ||||
| 	 * for 5 ms according to the SD spec | ||||
| 	 */ | ||||
| 	clock = host->ios.clock; | ||||
| 	host->ios.clock = 0; | ||||
| 	mmc_set_ios(host); | ||||
| 
 | ||||
| 	if (mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180)) { | ||||
| 	if (mmc_host_set_uhs_voltage(host)) { | ||||
| 		/*
 | ||||
| 		 * Voltages may not have been switched, but we've already | ||||
| 		 * sent CMD11, so a power cycle is required anyway | ||||
| @ -1725,11 +1740,6 @@ int mmc_set_uhs_voltage(struct mmc_host *host, u32 ocr) | ||||
| 		goto power_cycle; | ||||
| 	} | ||||
| 
 | ||||
| 	/* Keep clock gated for at least 10 ms, though spec only says 5 ms */ | ||||
| 	mmc_delay(10); | ||||
| 	host->ios.clock = clock; | ||||
| 	mmc_set_ios(host); | ||||
| 
 | ||||
| 	/* Wait for at least 1 ms according to spec */ | ||||
| 	mmc_delay(1); | ||||
| 
 | ||||
|  | ||||
| @ -49,6 +49,7 @@ void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode); | ||||
| void mmc_set_bus_width(struct mmc_host *host, unsigned int width); | ||||
| u32 mmc_select_voltage(struct mmc_host *host, u32 ocr); | ||||
| int mmc_set_uhs_voltage(struct mmc_host *host, u32 ocr); | ||||
| int mmc_host_set_uhs_voltage(struct mmc_host *host); | ||||
| int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage); | ||||
| void mmc_set_timing(struct mmc_host *host, unsigned int timing); | ||||
| void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type); | ||||
|  | ||||
		Loading…
	
		Reference in New Issue
	
	Block a user