leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Qualcomm ARM64 DT updates for v5.14

Browse Source 
MSM8916 gains new support for Huawei Ascend G7, with NFC, sensors and
 touchscreen. The Samsung Galaxy A3/A5 gains battery support, touch keys,
 NFC.
 
 MSM8996 received more cleanup and refactoring, preparing for upcoming
 new devices. Note worthy is the long pending enablement of CPUfreq.
 
 SC7180 continues to stabilize, with a range of small fixes for various
 bits and pieces, and new revisions for the CoachZ and pompom devices.
 
 SC7280 continues to grow, with more clock controllers, thermal sensors,
 thermal zones, CPUfreq and interconnect providers.
 
 Xiaomi Poco F1 gaines audio support and the OnePlus 6/6T gaines IPA
 support.
 
 SM8350 gains some cleanups and the IPA device is enabled.
 
 Initial support for the Microsoft Surface Duo, based on SM8150, is
 added.
 
 IPQ8074 gained support for the HK10 board.
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmDH2OsbHGJqb3JuLmFu
 ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FDXkQAKsqE8ItJUGMoSjdmyFM
 9qdaFPtrUI2kJdyq5HQ75duaSdIcVtiiDzl1w/oz8JQJg+1Wy0/x33Y8vPt4EIrs
 9VQjeeXI4IyUMTnw/UEPZzmXebxYQBzryRQw0QQljptaFeIg9iVJXSUy+xqhHSdo
 nWlT7XqWsDE/WA0JJhd1mPZeF1YQ7EbSJRAuME4lPDv8Toi158i2rFQLV/ebI306
 U2KtN3C8N+XPsMwNZlGkPPIWXmcGlDgPHt3Wg7cTU8DUOP4c71pEuT2c8oC5o1Zu
 XXd6Irp3MLlmLImLYZBLUYho1SCHknbya2pKGfBy39yiI0RqPFFIPVFjcpHMomDT
 r1qsvbvtktK5TW7sYGR+Fcf66vQbvFVbydgR4IzvGth1DbajEkCGlPL7GwJURGN6
 U5U6Fws6cF0wko81CMy09/9j9F/HmWsL0t1z3aL3gdo0DswsxUy5NsWcEEY9xG0t
 A8IT7Qjd0t1OnVYp12oUKRKsvGtjL7O5iDBEV4QU4h2ckT0i12Wnxev1t6mw56V6
 RWzKd0aki7NCFwQ3AWWNeFpC+hmVrKz3OtnSQbjS0R+DEg9ayO9T46UVLer1maoh
 yXbaXyd5A1Vl3NQ4+1CARHgCWA9fmgJD13DDPF6zEVwPY8JS4ARSXVCLDXI7z4zC
 5xyHsMOMWPhR8LHaAUxlGqyU
 =Pj6c
 -----END PGP SIGNATURE-----

Merge tag 'qcom-arm64-for-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM64 DT updates for v5.14

MSM8916 gains new support for Huawei Ascend G7, with NFC, sensors and
touchscreen. The Samsung Galaxy A3/A5 gains battery support, touch keys,
NFC.

MSM8996 received more cleanup and refactoring, preparing for upcoming
new devices. Note worthy is the long pending enablement of CPUfreq.

SC7180 continues to stabilize, with a range of small fixes for various
bits and pieces, and new revisions for the CoachZ and pompom devices.

SC7280 continues to grow, with more clock controllers, thermal sensors,
thermal zones, CPUfreq and interconnect providers.

Xiaomi Poco F1 gaines audio support and the OnePlus 6/6T gaines IPA
support.

SM8350 gains some cleanups and the IPA device is enabled.

Initial support for the Microsoft Surface Duo, based on SM8150, is
added.

IPQ8074 gained support for the HK10 board.

* tag 'qcom-arm64-for-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (85 commits)
  arm64: dts: qcom: sc7180: Add xo clock for eMMC and Sd card
  arm64: dts: sc7280: Add interconnect provider DT nodes
  arm64: dts: qcom: msm8916-huawei-g7: Add NFC
  arm64: dts: qcom: msm8916-huawei-g7: Add display regulator
  arm64: dts: qcom: msm8916-huawei-g7: Add sensors
  arm64: dts: qcom: msm8916-huawei-g7: Add touchscreen
  arm64: dts: qcom: msm8916: Add device tree for Huawei Ascend G7
  arm64: dts: qcom: sc7180-trogdor: Update flash freq to match reality
  arm64: dts: qcom: sc7180: Add wakeup delay for adau codec
  arm64: dts: qcom: sdm845: Remove cros-pd-update on Cheza
  arm64: dts: qcom: sc7180: Remove cros-pd-update on Trogdor
  arm64: dts: qcom: sc7180: Disable PON on Trogdor
  arm64: dts: qcom: sc7180: Modify SPI_CLK voltage level for trogdor
  arm64: dts: qcom: add initial device-tree for Microsoft Surface Duo
  arm64: dts: qcom: sdm845-mtp: enable IPA
  arm64: dts: qcom: sc7180: SD-card GPIO pin set bias-pull up
  arm64: dts: qcom: sc7180: Move sdc pinconf to board specific DT files
  arm64: dts: qcom: msm8916-samsung-a2015: Add NFC
  arm64: dts: qcom: msm8916-samsung-a2015: Add rt5033 battery
  arm64: dts: qcom: msm8916-samsung-a5u: Add touch key regulator
  ...

Link: https://lore.kernel.org/r/20210614223712.393096-1-bjorn.andersson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson 2021-06-15 08:14:57 -07:00
commit 2e2ec371a4
59 changed files with 4516 additions and 977 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
Documentation/devicetree/bindings/arm/qcom.yaml
View File

@ -178,6 +178,7 @@ properties:
- items:
- enum:
- qcom,sc7280-idp
- google,senor
- const: qcom,sc7280
- items:

10
arch/arm64/boot/dts/qcom/Makefile
View File

@ -5,8 +5,11 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
@ -35,8 +38,8 @@ dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r2-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r0.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-kb.dtb
@ -51,6 +54,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb
@ -70,6 +75,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-fajita.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb

93
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
View File

@ -41,14 +41,14 @@
/ {
aliases {
serial0 = &blsp2_uart1;
serial1 = &blsp2_uart2;
serial2 = &blsp1_uart1;
i2c0 = &blsp1_i2c2;
serial0 = &blsp2_uart2;
serial1 = &blsp2_uart3;
serial2 = &blsp1_uart2;
i2c0 = &blsp1_i2c3;
i2c1 = &blsp2_i2c1;
i2c2 = &blsp2_i2c0;
spi0 = &blsp1_spi0;
spi1 = &blsp2_spi5;
i2c2 = &blsp2_i2c1;
spi0 = &blsp1_spi1;
spi1 = &blsp2_spi6;
};
chosen {
@ -133,24 +133,24 @@
};
};
&blsp1_i2c2 {
&blsp1_i2c3 {
/* On Low speed expansion */
label = "LS-I2C0";
status = "okay";
};
&blsp1_spi0 {
&blsp1_spi1 {
/* On Low speed expansion */
label = "LS-SPI0";
status = "okay";
};
&blsp1_uart1 {
&blsp1_uart2 {
label = "BT-UART";
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp1_uart1_default>;
pinctrl-1 = <&blsp1_uart1_sleep>;
pinctrl-0 = <&blsp1_uart2_default>;
pinctrl-1 = <&blsp1_uart2_sleep>;
bluetooth {
compatible = "qcom,qca6174-bt";
@ -162,7 +162,11 @@
};
};
&blsp2_i2c0 {
&adsp_pil {
status = "okay";
};
&blsp2_i2c1 {
/* On High speed expansion */
label = "HS-I2C2";
status = "okay";
@ -174,32 +178,36 @@
status = "okay";
};
&blsp2_spi5 {
&blsp2_spi6 {
/* On High speed expansion */
label = "HS-SPI1";
status = "okay";
};
&blsp2_uart1 {
&blsp2_uart2 {
label = "LS-UART1";
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_uart1_2pins_default>;
pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
pinctrl-0 = <&blsp2_uart2_2pins_default>;
pinctrl-1 = <&blsp2_uart2_2pins_sleep>;
};
&blsp2_uart2 {
&blsp2_uart3 {
label = "LS-UART0";
status = "disabled";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_uart2_4pins_default>;
pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
pinctrl-0 = <&blsp2_uart3_4pins_default>;
pinctrl-1 = <&blsp2_uart3_4pins_sleep>;
};
&camss {
vdda-supply = <&vreg_l2a_1p25>;
};
&gpu {
status = "okay";
};
&hdmi {
status = "okay";
@ -245,7 +253,12 @@
vdd-gfx-supply = <&vdd_gfx>;
};
&msmgpio {
&pm8994_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
};
&tlmm {
gpio-line-names =
"[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
"[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
@ -424,7 +437,7 @@
};
};
blsp1_uart1_default: blsp1_uart1_default {
blsp1_uart2_default: blsp1_uart2_default {
mux {
pins = "gpio41", "gpio42", "gpio43", "gpio44";
function = "blsp_uart2";
@ -437,7 +450,7 @@
};
};
blsp1_uart1_sleep: blsp1_uart1_sleep {
blsp1_uart2_sleep: blsp1_uart2_sleep {
mux {
pins = "gpio41", "gpio42", "gpio43", "gpio44";
function = "gpio";
@ -505,20 +518,20 @@
&pcie0 {
status = "okay";
perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
vddpe-3v3-supply = <&wlan_en>;
vdda-supply = <&vreg_l28a_0p925>;
};
&pcie1 {
status = "okay";
perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
perst-gpio = <&tlmm 130 GPIO_ACTIVE_LOW>;
vdda-supply = <&vreg_l28a_0p925>;
};
&pcie2 {
status = "okay";
perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
perst-gpio = <&tlmm 114 GPIO_ACTIVE_LOW>;
vdda-supply = <&vreg_l28a_0p925>;
};
@ -929,9 +942,9 @@
&sdhc2 {
/* External SD card */
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
cd-gpios = <&msmgpio 38 0x1>;
pinctrl-0 = <&sdc2_state_on &sdc2_cd_on>;
pinctrl-1 = <&sdc2_state_off &sdc2_cd_off>;
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vreg_l21a_2p95>;
vqmmc-supply = <&vreg_l13a_2p95>;
status = "okay";
@ -1026,20 +1039,6 @@
};
};
&spmi_bus {
pmic@0 {
pon@800 {
resin {
compatible = "qcom,pm8941-resin";
interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
debounce = <15625>;
bias-pull-up;
linux,code = <KEY_VOLUMEDOWN>;
};
};
};
};
&ufsphy {
status = "okay";
@ -1064,7 +1063,7 @@
status = "okay";
extcon = <&usb2_id>;
dwc3@7600000 {
usb@7600000 {
extcon = <&usb2_id>;
dr_mode = "otg";
maximum-speed = "high-speed";
@ -1075,7 +1074,7 @@
status = "okay";
extcon = <&usb3_id>;
dwc3@6a00000 {
usb@6a00000 {
extcon = <&usb3_id>;
dr_mode = "otg";
};
@ -1089,6 +1088,10 @@
};
&venus {
status = "okay";
};
&wcd9335 {
clock-names = "mclk", "slimbus";
clocks = <&div1_mclk>,

24
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
View File

@ -17,7 +17,7 @@
qcom,board-id = <0x00010018 0>;
aliases {
serial0 = &blsp2_uart1;
serial0 = &blsp2_uart2;
};
chosen {
@ -81,14 +81,22 @@
};
};
&blsp2_uart1 {
&blsp2_uart2 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_uart1_2pins_default>;
pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
pinctrl-0 = <&blsp2_uart2_2pins_default>;
pinctrl-1 = <&blsp2_uart2_2pins_sleep>;
};
&msmgpio {
&gpu {
status = "okay";
};
&mdss {
status = "okay";
};
&tlmm {
sdc2_pins_default: sdc2-pins-default {
clk {
pins = "sdc2_clk";
@ -352,7 +360,7 @@
bus-width = <4>;
cd-gpios = <&msmgpio 38 0x1>;
cd-gpios = <&tlmm 38 0x1>;
vmmc-supply = <&vreg_l21a_2p95>;
vqmmc-supply = <&vreg_l13a_2p95>;
@ -383,3 +391,7 @@
vdda-phy-max-microamp = <18380>;
vdda-pll-max-microamp = <9440>;
};
&venus {
status = "okay";
};

11
arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts Normal file
View File

@ -0,0 +1,11 @@
// SPDX-License-Identifier: GPL-2.0-only
/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
*/
/dts-v1/;
#include "ipq8074-hk10.dtsi"
/ {
model = "Qualcomm Technologies, Inc. IPQ8074/AP-HK10-C1";
compatible = "qcom,ipq8074-hk10-c1", "qcom,ipq8074";
};

10
arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts Normal file
View File

@ -0,0 +1,10 @@
// SPDX-License-Identifier: GPL-2.0-only
/dts-v1/;
/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
*/
#include "ipq8074-hk10.dtsi"
/ {
model = "Qualcomm Technologies, Inc. IPQ8074/AP-HK10-C2";
compatible = "qcom,ipq8074-hk10-c2", "qcom,ipq8074";
};

76
arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi Normal file
View File

@ -0,0 +1,76 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2020, The Linux Foundation. All rights reserved.
*/
/dts-v1/;
#include "ipq8074.dtsi"
/ {
#address-cells = <0x2>;
#size-cells = <0x2>;
interrupt-parent = <&intc>;
aliases {
serial0 = &blsp1_uart5;
};
chosen {
stdout-path = "serial0";
};
memory {
device_type = "memory";
reg = <0x0 0x40000000 0x0 0x20000000>;
};
};
&blsp1_spi1 {
status = "ok";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
};
};
&blsp1_uart5 {
status = "ok";
};
&pcie0 {
status = "ok";
perst-gpio = <&tlmm 58 0x1>;
};
&pcie1 {
status = "ok";
perst-gpio = <&tlmm 61 0x1>;
};
&pcie_phy0 {
status = "ok";
};
&pcie_phy1 {
status = "ok";
};
&qpic_bam {
status = "ok";
};
&qpic_nand {
status = "ok";
nand@0 {
reg = <0>;
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
nand-bus-width = <8>;
};
};

5
arch/arm64/boot/dts/qcom/ipq8074.dtsi
View File

@ -165,6 +165,7 @@
clock-names = "cfg_ahb", "ref";
resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
status = "disabled";
};
pcie_phy0: phy@86000 {
@ -427,7 +428,7 @@
resets = <&gcc GCC_USB0_BCR>;
status = "disabled";
dwc_0: dwc3@8a00000 {
dwc_0: usb@8a00000 {
compatible = "snps,dwc3";
reg = <0x8a00000 0xcd00>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
@ -468,7 +469,7 @@
resets = <&gcc GCC_USB1_BCR>;
status = "disabled";
dwc_1: dwc3@8c00000 {
dwc_1: usb@8c00000 {
compatible = "snps,dwc3";
reg = <0x8c00000 0xcd00>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;

26
arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
View File

@ -45,6 +45,24 @@
status = "okay";
};
&blsp_i2c4 {
status = "okay";
touchscreen@26 {
compatible = "mstar,msg2638";
reg = <0x26>;
interrupt-parent = <&msmgpio>;
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ts_int_reset_default>;
vdd-supply = <&pm8916_l17>;
vddio-supply = <&pm8916_l5>;
touchscreen-size-x = <2048>;
touchscreen-size-y = <2048>;
};
};
&blsp_i2c5 {
status = "okay";
@ -281,6 +299,14 @@
bias-pull-up;
};
ts_int_reset_default: ts-int-reset-default {
pins = "gpio13", "gpio100";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
usb_id_default: usb-id-default {
pins = "gpio69";
function = "gpio";

454
arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts Normal file
View File

@ -0,0 +1,454 @@
// SPDX-License-Identifier: GPL-2.0-only
// Copyright (C) 2021 Stephan Gerhold
/dts-v1/;
#include "msm8916-pm8916.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/leds/common.h>
/*
* Note: The original firmware from Huawei can only boot 32-bit kernels.
* To boot arm64 kernels it is necessary to flash 64-bit TZ/HYP firmware
* with EDL, e.g. taken from the DragonBoard 410c. This works because Huawei
* forgot to set up (firmware) secure boot for some reason.
*
* Also note that Huawei no longer provides bootloader unlock codes.
* This can be bypassed by patching the bootloader from a custom HYP firmware,
* making it think the bootloader is unlocked.
*
* See: https://wiki.postmarketos.org/wiki/Huawei_Ascend_G7_(huawei-g7)
*/
/ {
model = "Huawei Ascend G7";
compatible = "huawei,g7", "qcom,msm8916";
aliases {
serial0 = &blsp1_uart2;
};
chosen {
stdout-path = "serial0";
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_default>;
label = "GPIO Buttons";
volume-up {
label = "Volume Up";
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&gpio_leds_default>;
led-0 {
gpios = <&msmgpio 8 GPIO_ACTIVE_HIGH>;
color = <LED_COLOR_ID_RED>;
default-state = "off";
function = LED_FUNCTION_INDICATOR;
};
led-1 {
gpios = <&msmgpio 9 GPIO_ACTIVE_HIGH>;
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
function = LED_FUNCTION_INDICATOR;
};
led-2 {
gpios = <&msmgpio 10 GPIO_ACTIVE_HIGH>;
color = <LED_COLOR_ID_BLUE>;
default-state = "off";
function = LED_FUNCTION_INDICATOR;
};
};
usb_id: usb-id {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&msmgpio 117 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb_id_default>;
};
};
&blsp_i2c2 {
status = "okay";
magnetometer@c {
compatible = "asahi-kasei,ak09911";
reg = <0x0c>;
vdd-supply = <&pm8916_l17>;
vid-supply = <&pm8916_l6>;
reset-gpios = <&msmgpio 36 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&mag_reset_default>;
};
accelerometer@1e {
compatible = "kionix,kx023-1025";
reg = <0x1e>;
interrupt-parent = <&msmgpio>;
interrupts = <115 IRQ_TYPE_EDGE_RISING>;
vdd-supply = <&pm8916_l17>;
vddio-supply = <&pm8916_l6>;
pinctrl-names = "default";
pinctrl-0 = <&accel_irq_default>;
mount-matrix = "-1", "0", "0",
"0", "1", "0",
"0", "0", "1";
};
proximity@39 {
compatible = "avago,apds9930";
reg = <0x39>;
interrupt-parent = <&msmgpio>;
interrupts = <113 IRQ_TYPE_EDGE_FALLING>;
vdd-supply = <&pm8916_l17>;
vddio-supply = <&pm8916_l6>;
led-max-microamp = <100000>;
amstaos,proximity-diodes = <1>;
pinctrl-names = "default";
pinctrl-0 = <&prox_irq_default>;
};
regulator@3e {
compatible = "ti,tps65132";
reg = <0x3e>;
pinctrl-names = "default";
pinctrl-0 = <&reg_lcd_en_default>;
reg_lcd_pos: outp {
regulator-name = "outp";
regulator-min-microvolt = <5400000>;
regulator-max-microvolt = <5400000>;
enable-gpios = <&msmgpio 97 GPIO_ACTIVE_HIGH>;
regulator-active-discharge = <1>;
};
reg_lcd_neg: outn {
regulator-name = "outn";
regulator-min-microvolt = <5400000>;
regulator-max-microvolt = <5400000>;
enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
regulator-active-discharge = <1>;
};
};
};
&blsp_i2c5 {
status = "okay";
rmi4@70 {
compatible = "syna,rmi4-i2c";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&msmgpio>;
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
vdd-supply = <&pm8916_l17>;
vio-supply = <&pm8916_l16>;
pinctrl-names = "default";
pinctrl-0 = <&ts_irq_default>;
syna,startup-delay-ms = <100>;
rmi4-f01@1 {
reg = <0x1>;
syna,nosleep-mode = <1>; /* Allow sleeping */
};
rmi4-f11@11 {
reg = <0x11>;
syna,sensor-type = <1>; /* Touchscreen */
};
};
};
&blsp_i2c6 {
status = "okay";
nfc@28 {
compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
reg = <0x28>;
interrupt-parent = <&msmgpio>;
interrupts = <21 IRQ_TYPE_EDGE_RISING>;
enable-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>;
firmware-gpios = <&msmgpio 2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&nfc_default>;
};
};
&blsp1_uart2 {
status = "okay";
};
&pm8916_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
};
&pm8916_vib {
status = "okay";
};
&pronto {
status = "okay";
};
&sdhc_1 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
};
&sdhc_2 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdhc2_cd_default>;
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdhc2_cd_default>;
/*
* The Huawei device tree sets cd-gpios = <&msmgpio 38 GPIO_ACTIVE_HIGH>.
* However, gpio38 does not change its state when inserting/removing the
* SD card, it's just low all the time. The Huawei kernel seems to use
* polling for SD card detection instead.
*
* However, looking closer at the GPIO debug output it turns out that
* gpio56 switches its state when inserting/removing the SD card.
* It behaves just like gpio38 normally does. Usually GPIO56 is used as
* "UIM2_PRESENT", i.e. to check if a second SIM card is inserted.
* Maybe Huawei decided to replace the second SIM card slot with the
* SD card slot and forgot to re-route to gpio38.
*/
cd-gpios = <&msmgpio 56 GPIO_ACTIVE_LOW>;
};
&usb {
status = "okay";
extcon = <&usb_id>, <&usb_id>;
};
&usb_hs_phy {
extcon = <&usb_id>;
};
&smd_rpm_regulators {
vdd_l1_l2_l3-supply = <&pm8916_s3>;
vdd_l4_l5_l6-supply = <&pm8916_s4>;
vdd_l7-supply = <&pm8916_s4>;
s3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1300000>;
};
s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2100000>;
};
l1 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
l4 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
};
l5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l8 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
};
l9 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
l10 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2800000>;
};
l11 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
regulator-allow-set-load;
regulator-system-load = <200000>;
};
l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
l13 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
};
l14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
l15 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
l16 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l17 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
l18 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
};
};
&msmgpio {
accel_irq_default: accel-irq-default {
pins = "gpio115";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
gpio_keys_default: gpio-keys-default {
pins = "gpio107";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
gpio_leds_default: gpio-leds-default {
pins = "gpio8", "gpio9", "gpio10";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
nfc_default: nfc-default {
pins = "gpio2", "gpio20", "gpio21";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
mag_reset_default: mag-reset-default {
pins = "gpio36";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
prox_irq_default: prox-irq-default {
pins = "gpio113";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
reg_lcd_en_default: reg-lcd-en-default {
pins = "gpio32", "gpio97";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
sdhc2_cd_default: sdhc2-cd-default {
pins = "gpio56";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
ts_irq_default: ts-irq-default {
pins = "gpio13";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
usb_id_default: usb-id-default {
pins = "gpio117";
function = "gpio";
drive-strength = <8>;
bias-pull-up;
};
};

131
arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
View File

@ -4,6 +4,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
aliases {
@ -95,6 +96,63 @@
pinctrl-0 = <&muic_int_default>;
};
};
i2c-tkey {
compatible = "i2c-gpio";
sda-gpios = <&msmgpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
scl-gpios = <&msmgpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
pinctrl-names = "default";
pinctrl-0 = <&tkey_i2c_default>;
#address-cells = <1>;
#size-cells = <0>;
touchkey: touchkey@20 {
/* Note: Actually an ABOV MCU that implements same interface */
compatible = "coreriver,tc360-touchkey";
reg = <0x20>;
interrupt-parent = <&msmgpio>;
interrupts = <98 IRQ_TYPE_EDGE_FALLING>;
/* vcc/vdd-supply are board-specific */
vddio-supply = <&pm8916_l6>;
linux,keycodes = <KEY_APPSELECT KEY_BACK>;
pinctrl-names = "default";
pinctrl-0 = <&tkey_default>;
};
};
i2c-nfc {
compatible = "i2c-gpio";
sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
pinctrl-names = "default";
pinctrl-0 = <&nfc_i2c_default>;
#address-cells = <1>;
#size-cells = <0>;
nfc@27 {
compatible = "samsung,s3fwrn5-i2c";
reg = <0x27>;
interrupt-parent = <&msmgpio>;
interrupts = <21 IRQ_TYPE_EDGE_RISING>;
en-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>;
wake-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>;
clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>;
pinctrl-names = "default";
pinctrl-0 = <&nfc_default &nfc_clk_req>;
};
};
};
&blsp_i2c2 {
@ -122,6 +180,20 @@
};
};
&blsp_i2c4 {
status = "okay";
battery@35 {
compatible = "richtek,rt5033-battery";
reg = <0x35>;
interrupt-parent = <&msmgpio>;
interrupts = <121 IRQ_TYPE_EDGE_BOTH>;
pinctrl-names = "default";
pinctrl-0 = <&fg_alert_default>;
};
};
&blsp1_uart2 {
status = "okay";
};
@ -284,6 +356,14 @@
bias-disable;
};
fg_alert_default: fg-alert-default {
pins = "gpio121";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
gpio_keys_default: gpio-keys-default {
pins = "gpio107", "gpio109";
function = "gpio";
@ -333,6 +413,46 @@
bias-disable;
};
nfc_default: nfc-default {
pins = "gpio20", "gpio49";
function = "gpio";
drive-strength = <2>;
bias-disable;
irq {
pins = "gpio21";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
};
nfc_i2c_default: nfc-i2c-default {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
tkey_default: tkey-default {
pins = "gpio98";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
tkey_i2c_default: tkey-i2c-default {
pins = "gpio16", "gpio17";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
tsp_en_default: tsp-en-default {
pins = "gpio73";
function = "gpio";
@ -341,3 +461,14 @@
bias-disable;
};
};
&pm8916_gpios {
nfc_clk_req: nfc-clk-req {
pins = "gpio2";
function = "func1";
input-enable;
bias-disable;
power-source = <PM8916_GPIO_L2>;
};
};

47
arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
View File

@ -20,6 +20,37 @@
pinctrl-names = "default";
pinctrl-0 = <&panel_vdd3_default>;
};
reg_touch_key: regulator-touch-key {
compatible = "regulator-fixed";
regulator-name = "touch_key";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
gpio = <&msmgpio 86 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&tkey_en_default>;
};
reg_key_led: regulator-key-led {
compatible = "regulator-fixed";
regulator-name = "key_led";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&msmgpio 60 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&tkey_led_en_default>;
};
};
&touchkey {
vcc-supply = <&reg_touch_key>;
vdd-supply = <&reg_key_led>;
};
&accelerometer {
@ -81,6 +112,22 @@
bias-disable;
};
tkey_en_default: tkey-en-default {
pins = "gpio86";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
tkey_led_en_default: tkey-led-en-default {
pins = "gpio60";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
ts_int_default: ts-int-default {
pins = "gpio13";
function = "gpio";

26
arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
View File

@ -7,6 +7,19 @@
/ {
model = "Samsung Galaxy A5U (EUR)";
compatible = "samsung,a5u-eur", "qcom,msm8916";
reg_touch_key: regulator-touch-key {
compatible = "regulator-fixed";
regulator-name = "touch_key";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&msmgpio 97 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&tkey_en_default>;
};
};
&accelerometer {
@ -42,7 +55,20 @@
};
};
&touchkey {
vcc-supply = <&reg_touch_key>;
vdd-supply = <&reg_touch_key>;
};
&msmgpio {
tkey_en_default: tkey-en-default {
pins = "gpio97";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
ts_int_default: ts-int-default {
pins = "gpio13";
function = "gpio";

4
arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
View File

@ -32,3 +32,7 @@
};
};
};
&tlmm {
gpio-reserved-ranges = <85 4>;
};

2
arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi
View File

@ -7,7 +7,7 @@
/ {
aliases {
serial0 = &blsp2_uart1;
serial0 = &blsp2_uart2;
};
chosen {

653
arch/arm64/boot/dts/qcom/msm8996-pins.dtsi
View File

@ -1,653 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
*/
&msmgpio {
wcd9xxx_intr {
wcd_intr_default: wcd_intr_default{
mux {
pins = "gpio54";
function = "gpio";
};
config {
pins = "gpio54";
drive-strength = <2>; /* 2 mA */
bias-pull-down; /* pull down */
input-enable;
};
};
};
cdc_reset_ctrl {
cdc_reset_sleep: cdc_reset_sleep {
mux {
pins = "gpio64";
function = "gpio";
};
config {
pins = "gpio64";
drive-strength = <16>;
bias-disable;
output-low;
};
};
cdc_reset_active:cdc_reset_active {
mux {
pins = "gpio64";
function = "gpio";
};
config {
pins = "gpio64";
drive-strength = <16>;
bias-pull-down;
output-high;
};
};
};
blsp1_spi0_default: blsp1_spi0_default {
pinmux {
function = "blsp_spi1";
pins = "gpio0", "gpio1", "gpio3";
};
pinmux_cs {
function = "gpio";
pins = "gpio2";
};
pinconf {
pins = "gpio0", "gpio1", "gpio3";
drive-strength = <12>;
bias-disable;
};
pinconf_cs {
pins = "gpio2";
drive-strength = <16>;
bias-disable;
output-high;
};
};
blsp1_spi0_sleep: blsp1_spi0_sleep {
pinmux {
function = "gpio";
pins = "gpio0", "gpio1", "gpio2", "gpio3";
};
pinconf {
pins = "gpio0", "gpio1", "gpio2", "gpio3";
drive-strength = <2>;
bias-pull-down;
};
};
blsp1_i2c2_default: blsp1_i2c2_default {
pinmux {
function = "blsp_i2c3";
pins = "gpio47", "gpio48";
};
pinconf {
pins = "gpio47", "gpio48";
drive-strength = <16>;
bias-disable = <0>;
};
};
blsp1_i2c2_sleep: blsp1_i2c2_sleep {
pinmux {
function = "gpio";
pins = "gpio47", "gpio48";
};
pinconf {
pins = "gpio47", "gpio48";
drive-strength = <2>;
bias-disable = <0>;
};
};
blsp2_i2c0_default: blsp2_i2c0 {
pinmux {
function = "blsp_i2c7";
pins = "gpio55", "gpio56";
};
pinconf {
pins = "gpio55", "gpio56";
drive-strength = <16>;
bias-disable;
};
};
blsp2_i2c0_sleep: blsp2_i2c0_sleep {
pinmux {
function = "gpio";
pins = "gpio55", "gpio56";
};
pinconf {
pins = "gpio55", "gpio56";
drive-strength = <2>;
bias-disable;
};
};
blsp2_uart1_2pins_default: blsp2_uart1_2pins {
pinmux {
function = "blsp_uart8";
pins = "gpio4", "gpio5";
};
pinconf {
pins = "gpio4", "gpio5";
drive-strength = <16>;
bias-disable;
};
};
blsp2_uart1_2pins_sleep: blsp2_uart1_2pins_sleep {
pinmux {
function = "gpio";
pins = "gpio4", "gpio5";
};
pinconf {
pins = "gpio4", "gpio5";
drive-strength = <2>;
bias-disable;
};
};
blsp2_uart1_4pins_default: blsp2_uart1_4pins {
pinmux {
function = "blsp_uart8";
pins = "gpio4", "gpio5", "gpio6", "gpio7";
};
pinconf {
pins = "gpio4", "gpio5", "gpio6", "gpio7";
drive-strength = <16>;
bias-disable;
};
};
blsp2_uart1_4pins_sleep: blsp2_uart1_4pins_sleep {
pinmux {
function = "gpio";
pins = "gpio4", "gpio5", "gpio6", "gpio7";
};
pinconf {
pins = "gpio4", "gpio5", "gpio6", "gpio7";
drive-strength = <2>;
bias-disable;
};
};
blsp2_i2c1_default: blsp2_i2c1 {
pinmux {
function = "blsp_i2c8";
pins = "gpio6", "gpio7";
};
pinconf {
pins = "gpio6", "gpio7";
drive-strength = <16>;
bias-disable;
};
};
blsp2_i2c1_sleep: blsp2_i2c1_sleep {
pinmux {
function = "gpio";
pins = "gpio6", "gpio7";
};
pinconf {
pins = "gpio6", "gpio7";
drive-strength = <2>;
bias-disable;
};
};
blsp2_uart2_2pins_default: blsp2_uart2_2pins {
pinmux {
function = "blsp_uart9";
pins = "gpio49", "gpio50";
};
pinconf {
pins = "gpio49", "gpio50";
drive-strength = <16>;
bias-disable;
};
};
blsp2_uart2_2pins_sleep: blsp2_uart2_2pins_sleep {
pinmux {
function = "gpio";
pins = "gpio49", "gpio50";
};
pinconf {
pins = "gpio49", "gpio50";
drive-strength = <2>;
bias-disable;
};
};
blsp2_uart2_4pins_default: blsp2_uart2_4pins {
pinmux {
function = "blsp_uart9";
pins = "gpio49", "gpio50", "gpio51", "gpio52";
};
pinconf {
pins = "gpio49", "gpio50", "gpio51", "gpio52";
drive-strength = <16>;
bias-disable;
};
};
blsp2_uart2_4pins_sleep: blsp2_uart2_4pins_sleep {
pinmux {
function = "gpio";
pins = "gpio49", "gpio50", "gpio51", "gpio52";
};
pinconf {
pins = "gpio49", "gpio50", "gpio51", "gpio52";
drive-strength = <2>;
bias-disable;
};
};
blsp2_spi5_default: blsp2_spi5_default {
pinmux {
function = "blsp_spi12";
pins = "gpio85", "gpio86", "gpio88";
};
pinmux_cs {
function = "gpio";
pins = "gpio87";
};
pinconf {
pins = "gpio85", "gpio86", "gpio88";
drive-strength = <12>;
bias-disable;
};
pinconf_cs {
pins = "gpio87";
drive-strength = <16>;
bias-disable;
output-high;
};
};
blsp2_spi5_sleep: blsp2_spi5_sleep {
pinmux {
function = "gpio";
pins = "gpio85", "gpio86", "gpio87", "gpio88";
};
pinconf {
pins = "gpio85", "gpio86", "gpio87", "gpio88";
drive-strength = <2>;
bias-pull-down;
};
};
sdc2_clk_on: sdc2_clk_on {
config {
pins = "sdc2_clk";
bias-disable; /* NO pull */
drive-strength = <16>; /* 16 MA */
};
};
sdc2_clk_off: sdc2_clk_off {
config {
pins = "sdc2_clk";
bias-disable; /* NO pull */
drive-strength = <2>; /* 2 MA */
};
};
sdc2_cmd_on: sdc2_cmd_on {
config {
pins = "sdc2_cmd";
bias-pull-up; /* pull up */
drive-strength = <10>; /* 10 MA */
};
};
sdc2_cmd_off: sdc2_cmd_off {
config {
pins = "sdc2_cmd";
bias-pull-up; /* pull up */
drive-strength = <2>; /* 2 MA */
};
};
sdc2_data_on: sdc2_data_on {
config {
pins = "sdc2_data";
bias-pull-up; /* pull up */
drive-strength = <10>; /* 10 MA */
};
};
sdc2_data_off: sdc2_data_off {
config {
pins = "sdc2_data";
bias-pull-up; /* pull up */
drive-strength = <2>; /* 2 MA */
};
};
pcie0_clkreq_default: pcie0_clkreq_default {
mux {
pins = "gpio36";
function = "pci_e0";
};
config {
pins = "gpio36";
drive-strength = <2>;
bias-pull-up;
};
};
pcie0_perst_default: pcie0_perst_default {
mux {
pins = "gpio35";
function = "gpio";
};
config {
pins = "gpio35";
drive-strength = <2>;
bias-pull-down;
};
};
pcie0_wake_default: pcie0_wake_default {
mux {
pins = "gpio37";
function = "gpio";
};
config {
pins = "gpio37";
drive-strength = <2>;
bias-pull-up;
};
};
pcie0_clkreq_sleep: pcie0_clkreq_sleep {
mux {
pins = "gpio36";
function = "gpio";
};
config {
pins = "gpio36";
drive-strength = <2>;
bias-disable;
};
};
pcie0_wake_sleep: pcie0_wake_sleep {
mux {
pins = "gpio37";
function = "gpio";
};
config {
pins = "gpio37";
drive-strength = <2>;
bias-disable;
};
};
pcie1_clkreq_default: pcie1_clkreq_default {
mux {
pins = "gpio131";
function = "pci_e1";
};
config {
pins = "gpio131";
drive-strength = <2>;
bias-pull-up;
};
};
pcie1_perst_default: pcie1_perst_default {
mux {
pins = "gpio130";
function = "gpio";
};
config {
pins = "gpio130";
drive-strength = <2>;
bias-pull-down;
};
};
pcie1_wake_default: pcie1_wake_default {
mux {
pins = "gpio132";
function = "gpio";
};
config {
pins = "gpio132";
drive-strength = <2>;
bias-pull-down;
};
};
pcie1_clkreq_sleep: pcie1_clkreq_sleep {
mux {
pins = "gpio131";
function = "gpio";
};
config {
pins = "gpio131";
drive-strength = <2>;
bias-disable;
};
};
pcie1_wake_sleep: pcie1_wake_sleep {
mux {
pins = "gpio132";
function = "gpio";
};
config {
pins = "gpio132";
drive-strength = <2>;
bias-disable;
};
};
pcie2_clkreq_default: pcie2_clkreq_default {
mux {
pins = "gpio115";
function = "pci_e2";
};
config {
pins = "gpio115";
drive-strength = <2>;
bias-pull-up;
};
};
pcie2_perst_default: pcie2_perst_default {
mux {
pins = "gpio114";
function = "gpio";
};
config {
pins = "gpio114";
drive-strength = <2>;
bias-pull-down;
};
};
pcie2_wake_default: pcie2_wake_default {
mux {
pins = "gpio116";
function = "gpio";
};
config {
pins = "gpio116";
drive-strength = <2>;
bias-pull-down;
};
};
pcie2_clkreq_sleep: pcie2_clkreq_sleep {
mux {
pins = "gpio115";
function = "gpio";
};
config {
pins = "gpio115";
drive-strength = <2>;
bias-disable;
};
};
pcie2_wake_sleep: pcie2_wake_sleep {
mux {
pins = "gpio116";
function = "gpio";
};
config {
pins = "gpio116";
drive-strength = <2>;
bias-disable;
};
};
cci0_default: cci0_default {
pinmux {
function = "cci_i2c";
pins = "gpio17", "gpio18";
};
pinconf {
pins = "gpio17", "gpio18";
drive-strength = <16>;
bias-disable;
};
};
cci1_default: cci1_default {
pinmux {
function = "cci_i2c";
pins = "gpio19", "gpio20";
};
pinconf {
pins = "gpio19", "gpio20";
drive-strength = <16>;
bias-disable;
};
};
camera_board_default: camera_board_default {
mux_pwdn {
function = "gpio";
pins = "gpio98";
};
config_pwdn {
pins = "gpio98";
drive-strength = <16>;
bias-disable;
};
mux_rst {
function = "gpio";
pins = "gpio104";
};
config_rst {
pins = "gpio104";
drive-strength = <16>;
bias-disable;
};
mux_mclk1 {
function = "cam_mclk";
pins = "gpio14";
};
config_mclk1 {
pins = "gpio14";
drive-strength = <16>;
bias-disable;
};
};
camera_front_default: camera_front_default {
mux_pwdn {
function = "gpio";
pins = "gpio133";
};
config_pwdn {
pins = "gpio133";
drive-strength = <16>;
bias-disable;
};
mux_rst {
function = "gpio";
pins = "gpio23";
};
config_rst {
pins = "gpio23";
drive-strength = <16>;
bias-disable;
};
mux_mclk2 {
function = "cam_mclk";
pins = "gpio15";
};
config_mclk2 {
pins = "gpio15";
drive-strength = <16>;
bias-disable;
};
};
camera_rear_default: camera_rear_default {
mux_pwdn {
function = "gpio";
pins = "gpio26";
};
config_pwdn {
pins = "gpio26";
drive-strength = <16>;
bias-disable;
};
mux_rst {
function = "gpio";
pins = "gpio25";
};
config_rst {
pins = "gpio25";
drive-strength = <16>;
bias-disable;
};
mux_mclk0 {
function = "cam_mclk";
pins = "gpio13";
};
config_mclk0 {
pins = "gpio13";
drive-strength = <16>;
bias-disable;
};
};
};

995
arch/arm64/boot/dts/qcom/msm8996.dtsi
View File

File diff suppressed because it is too large Load Diff

2
arch/arm64/boot/dts/qcom/msm8998.dtsi
View File

@ -1964,7 +1964,7 @@
resets = <&gcc GCC_USB_30_BCR>;
usb3_dwc3: dwc3@a800000 {
usb3_dwc3: usb@a800000 {
compatible = "snps,dwc3";
reg = <0x0a800000 0xcd00>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;

24
arch/arm64/boot/dts/qcom/pm6150.dtsi
View File

@ -7,6 +7,30 @@
#include <dt-bindings/spmi/spmi.h>
#include <dt-bindings/thermal/thermal.h>
/ {
thermal-zones {
pm6150_thermal: pm6150-thermal {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-sensors = <&pm6150_temp>;
trips {
pm6150_trip0: trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
pm6150_crit: crit {
temperature = <115000>;
hysteresis = <0>;
type = "critical";
};
};
};
};
};
&spmi_bus {
pm6150_lsid0: pmic@0 {
compatible = "qcom,pm6150", "qcom,spmi-pmic";

53
arch/arm64/boot/dts/qcom/pm7325.dtsi Normal file
View File

@ -0,0 +1,53 @@
// SPDX-License-Identifier: BSD-3-Clause
// Copyright (c) 2021, The Linux Foundation. All rights reserved.
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
pm7325: pmic@1 {
compatible = "qcom,pm7325", "qcom,spmi-pmic";
reg = <0x1 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm7325_temp_alarm: temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm7325_gpios: gpios@8800 {
compatible = "qcom,pm7325-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
gpio-ranges = <&pm7325_gpios 0 0 10>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
};
&thermal_zones {
pm7325_thermal: pm7325-thermal {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-sensors = <&pm7325_temp_alarm>;
trips {
pm7325_trip0: trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
pm7325_crit: pm7325-crit {
temperature = <115000>;
hysteresis = <0>;
type = "critical";
};
};
};
};

32
arch/arm64/boot/dts/qcom/pm8350c.dtsi
View File

@ -13,13 +13,43 @@
#address-cells = <1>;
#size-cells = <0>;
pm8350c_temp_alarm: temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm8350c_gpios: gpio@8800 {
compatible = "qcom,pm8350c-gpio";
compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
gpio-ranges = <&pm8350c_gpios 0 0 9>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
};
&thermal_zones {
pm8350c_thermal: pm8350c-thermal {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-sensors = <&pm8350c_temp_alarm>;
trips {
pm8350c_trip0: trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
pm8350c_crit: pm8350c-crit {
temperature = <115000>;
hysteresis = <0>;
type = "critical";
};
};
};
};

8
arch/arm64/boot/dts/qcom/pm8994.dtsi
View File

@ -45,7 +45,6 @@
pm8994_pon: pon@800 {
compatible = "qcom,pm8916-pon";
reg = <0x800>;
mode-bootloader = <0x2>;
mode-recovery = <0x1>;
@ -58,6 +57,13 @@
linux,code = <KEY_POWER>;
};
pm8994_resin: resin {
compatible = "qcom,pm8941-resin";
interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
debounce = <15625>;
bias-pull-up;
status = "disabled";
};
};
pm8994_temp: temp-alarm@2400 {

13
arch/arm64/boot/dts/qcom/pmi8994.dtsi
View File

@ -32,5 +32,18 @@
#address-cells = <1>;
#size-cells = <1>;
};
pmi8994_wled: wled@d800 {
compatible = "qcom,pmi8994-wled";
reg = <0xd800 0xd900>;
interrupts = <3 0xd8 0x02 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "short";
qcom,num-strings = <3>;
/* Yes, all four strings *have to* be defined or things won't work. */
qcom,enabled-strings = <0 1 2 3>;
qcom,cabc;
qcom,eternal-pfet;
status = "disabled";
};
};
};

51
arch/arm64/boot/dts/qcom/pmk8350.dtsi
View File

@ -3,6 +3,8 @@
* Copyright (c) 2021, Linaro Limited
*/
#include <dt-bindings/input/input.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
@ -13,10 +15,57 @@
#address-cells = <1>;
#size-cells = <0>;
pmk8350_pon: pon@1300 {
compatible = "qcom,pm8998-pon";
reg = <0x1300>;
pwrkey {
compatible = "qcom,pmk8350-pwrkey";
interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
linux,code = <KEY_POWER>;
};
resin {
compatible = "qcom,pmk8350-resin";
interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
linux,code = <KEY_VOLUMEDOWN>;
};
};
pmk8350_vadc: adc@3100 {
compatible = "qcom,spmi-adc7";
reg = <0x3100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "eoc-int-en-set";
#io-channel-cells = <1>;
io-channel-ranges;
};
pmk8350_adc_tm: adc-tm@3400 {
compatible = "qcom,adc-tm7";
reg = <0x3400>;
interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "threshold";
#address-cells = <1>;
#size-cells = <0>;
#thermal-sensor-cells = <1>;
status = "disabled";
};
pmk8350_rtc: rtc@6100 {
compatible = "qcom,pmk8350-rtc";
reg = <0x6100>, <0x6200>;
reg-names = "rtc", "alarm";
interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
};
pmk8350_gpios: gpio@b000 {
compatible = "qcom,pmk8350-gpio";
compatible = "qcom,pmk8350-gpio", "qcom,spmi-gpio";
reg = <0xb000>;
gpio-controller;
gpio-ranges = <&pmk8350_gpios 0 0 4>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;

32
arch/arm64/boot/dts/qcom/pmr735a.dtsi
View File

@ -13,13 +13,43 @@
#address-cells = <1>;
#size-cells = <0>;
pmr735a_temp_alarm: temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pmr735a_gpios: gpio@8800 {
compatible = "qcom,pmr735a-gpio";
compatible = "qcom,pmr735a-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
gpio-ranges = <&pmr735a_gpios 0 0 4>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
};
&thermal_zones {
pmr735a_thermal: pmr735a-thermal {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-sensors = <&pmr735a_temp_alarm>;
trips {
pmr735a_trip0: trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
pmr735a_crit: pmr735a-crit {
temperature = <115000>;
hysteresis = <0>;
type = "critical";
};
};
};
};

2
arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
View File

@ -337,7 +337,7 @@
&usb3 {
status = "okay";
dwc3@7580000 {
usb@7580000 {
dr_mode = "host";
};
};

4
arch/arm64/boot/dts/qcom/qcs404.dtsi
View File

@ -544,7 +544,7 @@
assigned-clock-rates = <19200000>, <200000000>;
status = "disabled";
dwc3@7580000 {
usb@7580000 {
compatible = "snps,dwc3";
reg = <0x07580000 0xcd00>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
@ -573,7 +573,7 @@
assigned-clock-rates = <19200000>, <133333333>;
status = "disabled";
dwc3@78c0000 {
usb@78c0000 {
compatible = "snps,dwc3";
reg = <0x078c0000 0xcc00>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;

169
arch/arm64/boot/dts/qcom/sc7180-idp.dts
View File

@ -9,6 +9,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include "sc7180.dtsi"
#include "pm6150.dtsi"
#include "pm6150l.dtsi"
@ -45,7 +46,7 @@
/* Increase the size from 2MB to 8MB */
&rmtfs_mem {
reg = <0x0 0x84400000 0x0 0x800000>;
reg = <0x0 0x94600000 0x0 0x800000>;
};
/ {
@ -288,6 +289,57 @@
};
};
&dsi0 {
status = "okay";
vdda-supply = <&vreg_l3c_1p2>;
panel@0 {
compatible = "visionox,rm69299-1080p-display";
reg = <0>;
vdda-supply = <&vreg_l8c_1p8>;
vdd3p3-supply = <&vreg_l18a_2p8>;
pinctrl-names = "default";
pinctrl-0 = <&disp_pins>;
reset-gpios = <&pm6150l_gpio 3 GPIO_ACTIVE_HIGH>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
panel0_in: endpoint {
remote-endpoint = <&dsi0_out>;
};
};
};
};
ports {
port@1 {
endpoint {
remote-endpoint = <&panel0_in>;
data-lanes = <0 1 2 3>;
};
};
};
};
&dsi_phy {
status = "okay";
};
&mdp {
status = "okay";
};
&mdss {
status = "okay";
};
&qfprom {
vcc-supply = <&vreg_l11a_1p8>;
};
@ -414,6 +466,19 @@
/* PINCTRL - additions to nodes defined in sc7180.dtsi */
&pm6150l_gpio {
disp_pins: disp-pins {
pinconf {
pins = "gpio3";
function = PMIC_GPIO_FUNC_FUNC1;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_MED>;
power-source = <0>;
bias-disable;
output-low;
};
};
};
&qspi_clk {
pinconf {
pins = "gpio63";
@ -598,4 +663,106 @@
bias-pull-up;
};
};
sdc1_on: sdc1-on {
pinconf-clk {
pins = "sdc1_clk";
bias-disable;
drive-strength = <16>;
};
pinconf-cmd {
pins = "sdc1_cmd";
bias-pull-up;
drive-strength = <10>;
};
pinconf-data {
pins = "sdc1_data";
bias-pull-up;
drive-strength = <10>;
};
pinconf-rclk {
pins = "sdc1_rclk";
bias-pull-down;
};
};
sdc1_off: sdc1-off {
pinconf-clk {
pins = "sdc1_clk";
bias-disable;
drive-strength = <2>;
};
pinconf-cmd {
pins = "sdc1_cmd";
bias-pull-up;
drive-strength = <2>;
};
pinconf-data {
pins = "sdc1_data";
bias-pull-up;
drive-strength = <2>;
};
pinconf-rclk {
pins = "sdc1_rclk";
bias-pull-down;
};
};
sdc2_on: sdc2-on {
pinconf-clk {
pins = "sdc2_clk";
bias-disable;
drive-strength = <16>;
};
pinconf-cmd {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <10>;
};
pinconf-data {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <10>;
};
pinconf-sd-cd {
pins = "gpio69";
bias-pull-up;
drive-strength = <2>;
};
};
sdc2_off: sdc2-off {
pinconf-clk {
pins = "sdc2_clk";
bias-disable;
drive-strength = <2>;
};
pinconf-cmd {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <2>;
};
pinconf-data {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <2>;
};
pinconf-sd-cd {
pins = "gpio69";
bias-pull-up;
drive-strength = <2>;
};
};
};

4
arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts
View File

@ -9,8 +9,8 @@
#include "sc7180-trogdor-lte-sku.dtsi"
/ {
model = "Google CoachZ (rev1) with LTE";
compatible = "google,coachz-rev1-sku0", "qcom,sc7180";
model = "Google CoachZ (rev1 - 2) with LTE";
compatible = "google,coachz-rev1-sku0", "google,coachz-rev2-sku0", "qcom,sc7180";
};
&cros_ec_proximity {

22
arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts
View File

@ -10,8 +10,26 @@
#include "sc7180-trogdor-coachz.dtsi"
/ {
model = "Google CoachZ (rev1)";
compatible = "google,coachz-rev1", "qcom,sc7180";
model = "Google CoachZ (rev1 - 2)";
compatible = "google,coachz-rev1", "google,coachz-rev2", "qcom,sc7180";
};
/*
* CoachZ rev1 is stuffed with a 47k NTC as charger thermistor which currently
* is not supported by the PM6150 ADC driver. Disable the charger thermal zone
* to avoid using bogus temperature values.
*/
&charger_thermal {
status = "disabled";
};
/*
* CoachZ rev1 is stuffed with a 47k NTC as thermistor for skin temperature,
* which currently is not supported by the PM6150 ADC driver. Disable the
* skin temperature thermal zone to avoid using bogus temperature values.
*/
&skin_temp_thermal {
status = "disabled";
};
&tlmm {

6
arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2-lte.dts → arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dts
View File

@ -2,14 +2,14 @@
/*
* Google CoachZ board device tree source
*
* Copyright 2020 Google LLC.
* Copyright 2021 Google LLC.
*/
#include "sc7180-trogdor-coachz-r2.dts"
#include "sc7180-trogdor-coachz-r3.dts"
#include "sc7180-trogdor-lte-sku.dtsi"
/ {
model = "Google CoachZ (rev2+) with LTE";
model = "Google CoachZ (rev3+) with LTE";
compatible = "google,coachz-sku0", "qcom,sc7180";
};

4
arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2.dts → arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dts
View File

@ -2,7 +2,7 @@
/*
* Google CoachZ board device tree source
*
* Copyright 2020 Google LLC.
* Copyright 2021 Google LLC.
*/
/dts-v1/;
@ -10,6 +10,6 @@
#include "sc7180-trogdor-coachz.dtsi"
/ {
model = "Google CoachZ (rev2+)";
model = "Google CoachZ (rev3+)";
compatible = "google,coachz", "qcom,sc7180";
};

64
arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
View File

@ -23,8 +23,53 @@ ap_h1_spi: &spi0 {};
adau7002: audio-codec-1 {
compatible = "adi,adau7002";
IOVDD-supply = <&pp1800_l15a>;
wakeup-delay-ms = <15>;
#sound-dai-cells = <0>;
};
thermal-zones {
skin_temp_thermal: skin-temp-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
thermal-sensors = <&pm6150_adc_tm 1>;
sustainable-power = <814>;
trips {
skin_temp_alert0: trip-point0 {
temperature = <42000>;
hysteresis = <1000>;
type = "passive";
};
skin_temp_alert1: trip-point1 {
temperature = <45000>;
hysteresis = <1000>;
type = "passive";
};
skin-temp-crit {
temperature = <60000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&skin_temp_alert0>;
cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&skin_temp_alert1>;
cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
};
};
&ap_spi_fp {
@ -77,6 +122,25 @@ ap_ts_pen_1v8: &i2c4 {
compatible = "boe,nv110wtm-n61";
};
&pm6150_adc {
skin-temp-thermistor@4e {
reg = <ADC5_AMUX_THM2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
};
&pm6150_adc_tm {
status = "okay";
skin-temp-thermistor@1 {
reg = <1>;
io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
};
&pp3300_dx_edp {
gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
};

9
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
View File

@ -14,15 +14,6 @@
compatible = "google,lazor-rev0", "qcom,sc7180";
};
/*
* Lazor is stuffed with a 47k NTC as charger thermistor which currently is
* not supported by the PM6150 ADC driver. Disable the charger thermal zone
* to avoid using bogus temperature values.
*/
&charger_thermal {
status = "disabled";
};
&pp3300_hub {
/* pp3300_l7c is used to power the USB hub */
/delete-property/regulator-always-on;

9
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
View File

@ -14,15 +14,6 @@
compatible = "google,lazor-rev1", "google,lazor-rev2", "qcom,sc7180";
};
/*
* Lazor is stuffed with a 47k NTC as charger thermistor which currently is
* not supported by the PM6150 ADC driver. Disable the charger thermal zone
* to avoid using bogus temperature values.
*/
&charger_thermal {
status = "disabled";
};
&pp3300_hub {
/* pp3300_l7c is used to power the USB hub */
/delete-property/regulator-always-on;

9
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts
View File

@ -14,12 +14,3 @@
model = "Google Lazor (rev3+)";
compatible = "google,lazor", "qcom,sc7180";
};
/*
* Lazor is stuffed with a 47k NTC as charger thermistor which currently is
* not supported by the PM6150 ADC driver. Disable the charger thermal zone
* to avoid using bogus temperature values.
*/
&charger_thermal {
status = "disabled";
};

9
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
View File

@ -21,6 +21,15 @@ ap_h1_spi: &spi0 {};
semtech,avg-pos-strength = <64>;
};
/*
* Lazor is stuffed with a 47k NTC as charger thermistor which currently is
* not supported by the PM6150 ADC driver. Disable the charger thermal zone
* to avoid using bogus temperature values.
*/
&charger_thermal {
status = "disabled";
};
ap_ts_pen_1v8: &i2c4 {
status = "okay";
clock-frequency = <400000>;

12
arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts
View File

@ -9,11 +9,23 @@
#include "sc7180-trogdor-pompom.dtsi"
/delete-node/ &keyboard_controller;
#include <arm/cros-ec-keyboard.dtsi>
/ {
model = "Google Pompom (rev1)";
compatible = "google,pompom-rev1", "qcom,sc7180";
};
/*
* Pompom rev1 is stuffed with a 47k NTC as charger thermistor which currently
* is not supported by the PM6150 ADC driver. Disable the charger thermal zone
* to avoid using bogus temperature values.
*/
&charger_thermal {
status = "disabled";
};
&pp3300_hub {
/* pp3300_l7c is used to power the USB hub */
/delete-property/regulator-always-on;

4
arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts
View File

@ -9,6 +9,6 @@
#include "sc7180-trogdor-lte-sku.dtsi"
/ {
model = "Google Pompom (rev2+) with LTE";
compatible = "google,pompom-sku0", "qcom,sc7180";
model = "Google Pompom (rev2) with LTE";
compatible = "google,pompom-rev2-sku0", "qcom,sc7180";
};

38
arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts
View File

@ -10,35 +10,15 @@
#include "sc7180-trogdor-pompom.dtsi"
/ {
model = "Google Pompom (rev2+)";
compatible = "google,pompom", "qcom,sc7180";
model = "Google Pompom (rev2)";
compatible = "google,pompom-rev2", "qcom,sc7180";
};
&keyboard_controller {
function-row-physmap = <
MATRIX_KEY(0x00, 0x02, 0) /* T1 */
MATRIX_KEY(0x03, 0x02, 0) /* T2 */
MATRIX_KEY(0x02, 0x02, 0) /* T3 */
MATRIX_KEY(0x01, 0x02, 0) /* T4 */
MATRIX_KEY(0x03, 0x04, 0) /* T5 */
MATRIX_KEY(0x02, 0x04, 0) /* T6 */
MATRIX_KEY(0x01, 0x04, 0) /* T7 */
MATRIX_KEY(0x02, 0x09, 0) /* T8 */
MATRIX_KEY(0x01, 0x09, 0) /* T9 */
MATRIX_KEY(0x00, 0x04, 0) /* T10 */
>;
linux,keymap = <
MATRIX_KEY(0x00, 0x02, KEY_BACK)
MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
MATRIX_KEY(0x01, 0x02, KEY_SCALE)
MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
MATRIX_KEY(0x02, 0x09, KEY_MUTE)
MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
CROS_STD_MAIN_KEYMAP
>;
/*
* Pompom rev2 is stuffed with a 47k NTC as charger thermistor which currently
* is not supported by the PM6150 ADC driver. Disable the charger thermal zone
* to avoid using bogus temperature values.
*/
&charger_thermal {
status = "disabled";
};

14
arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dts Normal file
View File

@ -0,0 +1,14 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Google Pompom board device tree source
*
* Copyright 2021 Google LLC.
*/
#include "sc7180-trogdor-pompom-r3.dts"
#include "sc7180-trogdor-lte-sku.dtsi"
/ {
model = "Google Pompom (rev3+) with LTE";
compatible = "google,pompom-sku0", "qcom,sc7180";
};

15
arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dts Normal file
View File

@ -0,0 +1,15 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Google Pompom board device tree source
*
* Copyright 2021 Google LLC.
*/
/dts-v1/;
#include "sc7180-trogdor-pompom.dtsi"
/ {
model = "Google Pompom (rev3+)";
compatible = "google,pompom", "qcom,sc7180";
};

29
arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
View File

@ -107,6 +107,35 @@ ap_ts_pen_1v8: &i2c4 {
};
};
&keyboard_controller {
function-row-physmap = <
MATRIX_KEY(0x00, 0x02, 0) /* T1 */
MATRIX_KEY(0x03, 0x02, 0) /* T2 */
MATRIX_KEY(0x02, 0x02, 0) /* T3 */
MATRIX_KEY(0x01, 0x02, 0) /* T4 */
MATRIX_KEY(0x03, 0x04, 0) /* T5 */
MATRIX_KEY(0x02, 0x04, 0) /* T6 */
MATRIX_KEY(0x01, 0x04, 0) /* T7 */
MATRIX_KEY(0x02, 0x09, 0) /* T8 */
MATRIX_KEY(0x01, 0x09, 0) /* T9 */
MATRIX_KEY(0x00, 0x04, 0) /* T10 */
>;
linux,keymap = <
MATRIX_KEY(0x00, 0x02, KEY_BACK)
MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
MATRIX_KEY(0x01, 0x02, KEY_SCALE)
MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
MATRIX_KEY(0x02, 0x09, KEY_MUTE)
MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
CROS_STD_MAIN_KEYMAP
>;
};
&panel {
compatible = "kingdisplay,kd116n21-30nv-a010";
};

121
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
View File

@ -64,11 +64,6 @@
no-map;
};
camera_mem: memory@8ec00000 {
reg = <0x0 0x8ec00000 0x0 0x500000>;
no-map;
};
venus_mem: memory@8f600000 {
reg = <0 0x8f600000 0 0x500000>;
no-map;
@ -335,8 +330,7 @@
compatible = "jedec,spi-nor";
reg = <0>;
/* TODO: Increase frequency after testing */
spi-max-frequency = <25000000>;
spi-max-frequency = <37500000>;
spi-tx-bus-width = <2>;
spi-rx-bus-width = <2>;
};
@ -564,10 +558,6 @@
#size-cells = <0>;
};
pdupdate {
compatible = "google,cros-ec-pd-update";
};
typec {
compatible = "google,cros-ec-typec";
#address-cells = <1>;
@ -655,6 +645,8 @@ edp_brij_i2c: &i2c2 {
clocks = <&rpmhcc RPMH_LN_BB_CLK3>;
clock-names = "refclk";
no-hpd;
ports {
#address-cells = <1>;
#size-cells = <0>;
@ -772,7 +764,7 @@ hp_i2c: &i2c9 {
qcom,capture-sd-lines = <0>;
};
mi2s@1 {
secondary_mi2s: mi2s@1 {
reg = <MI2S_SECONDARY>;
qcom,playback-sd-lines = <0>;
};
@ -805,7 +797,7 @@ hp_i2c: &i2c9 {
};
};
&pm6150_pwrkey {
&pm6150_pon {
status = "disabled";
};
@ -981,6 +973,7 @@ ap_spi_fp: &spi10 {
&qspi_clk {
pinconf {
pins = "gpio63";
drive-strength = <8>;
bias-disable;
};
};
@ -1494,4 +1487,106 @@ ap_spi_fp: &spi10 {
drive-strength = <2>;
};
};
sdc1_on: sdc1-on {
pinconf-clk {
pins = "sdc1_clk";
bias-disable;
drive-strength = <16>;
};
pinconf-cmd {
pins = "sdc1_cmd";
bias-pull-up;
drive-strength = <10>;
};
pinconf-data {
pins = "sdc1_data";
bias-pull-up;
drive-strength = <10>;
};
pinconf-rclk {
pins = "sdc1_rclk";
bias-pull-down;
};
};
sdc1_off: sdc1-off {
pinconf-clk {
pins = "sdc1_clk";
bias-disable;
drive-strength = <2>;
};
pinconf-cmd {
pins = "sdc1_cmd";
bias-pull-up;
drive-strength = <2>;
};
pinconf-data {
pins = "sdc1_data";
bias-pull-up;
drive-strength = <2>;
};
pinconf-rclk {
pins = "sdc1_rclk";
bias-pull-down;
};
};
sdc2_on: sdc2-on {
pinconf-clk {
pins = "sdc2_clk";
bias-disable;
drive-strength = <16>;
};
pinconf-cmd {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <10>;
};
pinconf-data {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <10>;
};
pinconf-sd-cd {
pins = "gpio69";
bias-pull-up;
drive-strength = <2>;
};
};
sdc2_off: sdc2-off {
pinconf-clk {
pins = "sdc2_clk";
bias-disable;
drive-strength = <2>;
};
pinconf-cmd {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <2>;
};
pinconf-data {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <2>;
};
pinconf-sd-cd {
pins = "gpio69";
bias-pull-up;
drive-strength = <2>;
};
};
};

122
arch/arm64/boot/dts/qcom/sc7180.dtsi
View File

@ -701,8 +701,9 @@
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
<&gcc GCC_SDCC1_AHB_CLK>;
clock-names = "core", "iface";
<&gcc GCC_SDCC1_AHB_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "core", "iface", "xo";
interconnects = <&aggre1_noc MASTER_EMMC 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_EMMC_CFG 0>;
interconnect-names = "sdhc-ddr","cpu-sdhc";
@ -768,8 +769,6 @@
#size-cells = <2>;
ranges;
iommus = <&apps_smmu 0x43 0x0>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>;
interconnect-names = "qup-core";
status = "disabled";
i2c0: i2c@880000 {
@ -1059,8 +1058,6 @@
#size-cells = <2>;
ranges;
iommus = <&apps_smmu 0x4c3 0x0>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>;
interconnect-names = "qup-core";
status = "disabled";
i2c6: i2c@a80000 {
@ -1871,108 +1868,6 @@
function = "lpass_ext";
};
};
sdc1_on: sdc1-on {
pinconf-clk {
pins = "sdc1_clk";
bias-disable;
drive-strength = <16>;
};
pinconf-cmd {
pins = "sdc1_cmd";
bias-pull-up;
drive-strength = <10>;
};
pinconf-data {
pins = "sdc1_data";
bias-pull-up;
drive-strength = <10>;
};
pinconf-rclk {
pins = "sdc1_rclk";
bias-pull-down;
};
};
sdc1_off: sdc1-off {
pinconf-clk {
pins = "sdc1_clk";
bias-disable;
drive-strength = <2>;
};
pinconf-cmd {
pins = "sdc1_cmd";
bias-pull-up;
drive-strength = <2>;
};
pinconf-data {
pins = "sdc1_data";
bias-pull-up;
drive-strength = <2>;
};
pinconf-rclk {
pins = "sdc1_rclk";
bias-pull-down;
};
};
sdc2_on: sdc2-on {
pinconf-clk {
pins = "sdc2_clk";
bias-disable;
drive-strength = <16>;
};
pinconf-cmd {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <10>;
};
pinconf-data {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <10>;
};
pinconf-sd-cd {
pins = "gpio69";
bias-pull-up;
drive-strength = <2>;
};
};
sdc2_off: sdc2-off {
pinconf-clk {
pins = "sdc2_clk";
bias-disable;
drive-strength = <2>;
};
pinconf-cmd {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <2>;
};
pinconf-data {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <2>;
};
pinconf-sd-cd {
pins = "gpio69";
bias-disable;
drive-strength = <2>;
};
};
};
remoteproc_mpss: remoteproc@4080000 {
@ -2670,8 +2565,9 @@
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_APPS_CLK>,
<&gcc GCC_SDCC2_AHB_CLK>;
clock-names = "core", "iface";
<&gcc GCC_SDCC2_AHB_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "core", "iface", "xo";
interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
@ -2754,8 +2650,8 @@
usb_1_qmpphy: phy-wrapper@88e9000 {
compatible = "qcom,sc7180-qmp-usb3-dp-phy";
reg = <0 0x088e9000 0 0x18c>,
<0 0x088e8000 0 0x38>,
<0 0x088ea000 0 0x40>;
<0 0x088e8000 0 0x3c>,
<0 0x088ea000 0 0x18c>;
status = "disabled";
#address-cells = <2>;
#size-cells = <2>;
@ -2860,7 +2756,7 @@
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>;
interconnect-names = "usb-ddr", "apps-usb";
usb_1_dwc3: dwc3@a600000 {
usb_1_dwc3: usb@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xe000>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;

36
arch/arm64/boot/dts/qcom/sc7280-idp.dts
View File

@ -7,11 +7,19 @@
/dts-v1/;
#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
#include <dt-bindings/iio/qcom,spmi-adc7-pmr735b.h>
#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
#include "sc7280.dtsi"
#include "pm7325.dtsi"
#include "pmr735a.dtsi"
#include "pm8350c.dtsi"
#include "pmk8350.dtsi"
/ {
model = "Qualcomm Technologies, Inc. sc7280 IDP platform";
compatible = "qcom,sc7280-idp", "qcom,sc7280";
compatible = "qcom,sc7280-idp", "google,senor", "qcom,sc7280";
aliases {
serial0 = &uart5;
@ -234,6 +242,32 @@
};
};
&pmk8350_vadc {
pm8350_die_temp {
reg = <PM8350_ADC7_DIE_TEMP>;
label = "pm8350_die_temp";
qcom,pre-scaling = <1 1>;
};
pmk8350_die_temp {
reg = <PMK8350_ADC7_DIE_TEMP>;
label = "pmk8350_die_temp";
qcom,pre-scaling = <1 1>;
};
pmr735a_die_temp {
reg = <PMR735A_ADC7_DIE_TEMP>;
label = "pmr735a_die_temp";
qcom,pre-scaling = <1 1>;
};
pmr735b_die_temp {
reg = <PMR735B_ADC7_DIE_TEMP>;
label = "pmr735b_die_temp";
qcom,pre-scaling = <1 1>;
};
};
&qupv3_id_0 {
status = "okay";
};

1171
arch/arm64/boot/dts/qcom/sc7280.dtsi
View File

File diff suppressed because it is too large Load Diff

4
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
View File

@ -714,10 +714,6 @@ ap_ts_i2c: &i2c14 {
#address-cells = <1>;
#size-cells = <0>;
};
pdupdate {
compatible = "google,cros-ec-pd-update";
};
};
};

5
arch/arm64/boot/dts/qcom/sdm845-mtp.dts
View File

@ -448,6 +448,11 @@
clock-frequency = <400000>;
};
&ipa {
status = "okay";
memory-region = <&ipa_fw_mem>;
};
&mdss {
status = "okay";
};

18
arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
View File

@ -46,6 +46,14 @@
};
reserved-memory {
/* The rmtfs_mem needs to be guarded due to "XPU limitations"
* it is otherwise possible for an allocation adjacent to the
* rmtfs_mem region to trigger an XPU violation, causing a crash.
*/
rmtfs_lower_guard: memory@f5b00000 {
no-map;
reg = <0 0xf5b00000 0 0x1000>;
};
/*
* The rmtfs memory region in downstream is 'dynamically allocated'
* but given the same address every time. Hard code it as this address is
@ -59,6 +67,10 @@
qcom,client-id = <1>;
qcom,vmid = <15>;
};
rmtfs_upper_guard: memory@f5d01000 {
no-map;
reg = <0 0xf5d01000 0 0x2000>;
};
/*
* It seems like reserving the old rmtfs_mem region is also needed to prevent
@ -387,6 +399,12 @@
};
};
&ipa {
status = "okay";
memory-region = <&ipa_fw_mem>;
};
&mdss {
status = "okay";
};

114
arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
View File

@ -5,6 +5,8 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/sound/qcom,q6asm.h>
#include "sdm845.dtsi"
#include "pm8998.dtsi"
#include "pmi8998.dtsi"
@ -311,6 +313,28 @@
};
};
/* QUAT I2S Uses 1 I2S SD Line for audio on TAS2559/60 amplifiers */
&q6afedai {
qi2s@22 {
reg = <22>;
qcom,sd-lines = <0>;
};
};
&q6asmdai {
dai@0 {
reg = <0>;
};
dai@1 {
reg = <1>;
};
dai@2 {
reg = <2>;
};
};
&qupv3_id_0 {
status = "okay";
};
@ -328,6 +352,70 @@
cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;
};
&sound {
compatible = "qcom,db845c-sndcard";
pinctrl-0 = <&quat_mi2s_active
&quat_mi2s_sd0_active>;
pinctrl-names = "default";
model = "Xiaomi Poco F1";
audio-routing =
"RX_BIAS", "MCLK",
"AMIC1", "MIC BIAS1",
"AMIC2", "MIC BIAS2",
"AMIC3", "MIC BIAS3";
mm1-dai-link {
link-name = "MultiMedia1";
cpu {
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
};
};
mm2-dai-link {
link-name = "MultiMedia2";
cpu {
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
};
};
mm3-dai-link {
link-name = "MultiMedia3";
cpu {
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
};
};
slim-dai-link {
link-name = "SLIM Playback";
cpu {
sound-dai = <&q6afedai SLIMBUS_0_RX>;
};
platform {
sound-dai = <&q6routing>;
};
codec {
sound-dai = <&wcd9340 0>;
};
};
slimcap-dai-link {
link-name = "SLIM Capture";
cpu {
sound-dai = <&q6afedai SLIMBUS_0_TX>;
};
platform {
sound-dai = <&q6routing>;
};
codec {
sound-dai = <&wcd9340 1>;
};
};
};
&tlmm {
gpio-reserved-ranges = <0 4>, <81 4>;
@ -356,6 +444,15 @@
function = "gpio";
bias-pull-up;
};
wcd_intr_default: wcd_intr_default {
pins = <54>;
function = "gpio";
input-enable;
bias-pull-down;
drive-strength = <2>;
};
};
&uart6 {
@ -416,6 +513,23 @@
vdda-pll-supply = <&vreg_l1a_0p875>;
};
&wcd9340{
pinctrl-0 = <&wcd_intr_default>;
pinctrl-names = "default";
clock-names = "extclk";
clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
reset-gpios = <&tlmm 64 0>;
vdd-buck-supply = <&vreg_s4a_1p8>;
vdd-buck-sido-supply = <&vreg_s4a_1p8>;
vdd-tx-supply = <&vreg_s4a_1p8>;
vdd-rx-supply = <&vreg_s4a_1p8>;
vdd-io-supply = <&vreg_s4a_1p8>;
qcom,micbias1-microvolt = <2700000>;
qcom,micbias2-microvolt = <1800000>;
qcom,micbias3-microvolt = <2700000>;
qcom,micbias4-microvolt = <2700000>;
};
&wifi {
status = "okay";

4
arch/arm64/boot/dts/qcom/sdm845.dtsi
View File

@ -3781,7 +3781,7 @@
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
interconnect-names = "usb-ddr", "apps-usb";
usb_1_dwc3: dwc3@a600000 {
usb_1_dwc3: usb@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
@ -3829,7 +3829,7 @@
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
interconnect-names = "usb-ddr", "apps-usb";
usb_2_dwc3: dwc3@a800000 {
usb_2_dwc3: usb@a800000 {
compatible = "snps,dwc3";
reg = <0 0x0a800000 0 0xcd00>;
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;

2
arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
View File

@ -376,6 +376,8 @@
clocks = <&sn65dsi86_refclk>;
clock-names = "refclk";
no-hpd;
ports {
#address-cells = <1>;
#size-cells = <0>;

543
arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts Normal file
View File

@ -0,0 +1,543 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (C) 2021, Microsoft Corporation
*/
/dts-v1/;
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/gpio/gpio.h>
#include "sm8150.dtsi"
#include "pm8150.dtsi"
#include "pm8150b.dtsi"
#include "pm8150l.dtsi"
/ {
model = "Microsoft Surface Duo";
compatible = "microsoft,surface-duo", "qcom,sm8150";
aliases {
serial0 = &uart2;
};
chosen {
stdout-path = "serial0:115200n8";
};
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
};
/*
* Apparently RPMh does not provide support for PM8150 S4 because it
* is always-on; model it as a fixed regulator.
*/
vreg_s4a_1p8: pm8150-s4 {
compatible = "regulator-fixed";
regulator-name = "vreg_s4a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&vph_pwr>;
};
gpio_keys {
compatible = "gpio-keys";
vol_up {
label = "Volume Up";
gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
};
};
&apps_rsc {
pm8150-rpmh-regulators {
compatible = "qcom,pm8150-rpmh-regulators";
qcom,pmic-id = "a";
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vdd-s3-supply = <&vph_pwr>;
vdd-s4-supply = <&vph_pwr>;
vdd-s5-supply = <&vph_pwr>;
vdd-s6-supply = <&vph_pwr>;
vdd-s7-supply = <&vph_pwr>;
vdd-s8-supply = <&vph_pwr>;
vdd-s9-supply = <&vph_pwr>;
vdd-s10-supply = <&vph_pwr>;
vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
vdd-l2-l10-supply = <&vreg_bob>;
vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>;
vdd-l6-l9-supply = <&vreg_s8c_1p3>;
vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
vdd-l13-l16-l17-supply = <&vreg_bob>;
vreg_s5a_2p0: smps5 {
regulator-min-microvolt = <1904000>;
regulator-max-microvolt = <2000000>;
};
vreg_s6a_0p9: smps6 {
regulator-min-microvolt = <920000>;
regulator-max-microvolt = <1128000>;
};
vdda_wcss_pll:
vreg_l1a_0p75: ldo1 {
regulator-min-microvolt = <752000>;
regulator-max-microvolt = <752000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vdd_pdphy:
vdda_usb_hs_3p1:
vreg_l2a_3p1: ldo2 {
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3a_0p8: ldo3 {
regulator-min-microvolt = <480000>;
regulator-max-microvolt = <932000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vdd_usb_hs_core:
vdda_csi_0_0p9:
vdda_csi_1_0p9:
vdda_csi_2_0p9:
vdda_csi_3_0p9:
vdda_dsi_0_0p9:
vdda_dsi_1_0p9:
vdda_dsi_0_pll_0p9:
vdda_dsi_1_pll_0p9:
vdda_pcie_1ln_core:
vdda_pcie_2ln_core:
vdda_pll_hv_cc_ebi01:
vdda_pll_hv_cc_ebi23:
vdda_qrefs_0p875_5:
vdda_sp_sensor:
vdda_ufs_2ln_core_1:
vdda_ufs_2ln_core_2:
vdda_usb_ss_dp_core_1:
vdda_usb_ss_dp_core_2:
vdda_qlink_lv:
vdda_qlink_lv_ck:
vreg_l5a_0p875: ldo5 {
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6a_1p2: ldo6 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7a_1p8: ldo7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vddpx_10:
vreg_l9a_1p2: ldo9 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10a_2p5: ldo10 {
regulator-min-microvolt = <2504000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11a_0p8: ldo11 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vdd_qfprom:
vdd_qfprom_sp:
vdda_apc_cs_1p8:
vdda_gfx_cs_1p8:
vdda_usb_hs_1p8:
vdda_qrefs_vref_1p8:
vddpx_10_a:
vreg_l12a_1p8: ldo12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13a_2p7: ldo13 {
regulator-min-microvolt = <2704000>;
regulator-max-microvolt = <2704000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l14a_1p8: ldo14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l15a_1p7: ldo15 {
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <1704000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l16a_2p7: ldo16 {
regulator-min-microvolt = <2704000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l17a_3p0: ldo17 {
regulator-min-microvolt = <2856000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
pm8150l-rpmh-regulators {
compatible = "qcom,pm8150l-rpmh-regulators";
qcom,pmic-id = "c";
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vdd-s3-supply = <&vph_pwr>;
vdd-s4-supply = <&vph_pwr>;
vdd-s5-supply = <&vph_pwr>;
vdd-s6-supply = <&vph_pwr>;
vdd-s7-supply = <&vph_pwr>;
vdd-s8-supply = <&vph_pwr>;
vdd-l1-l8-supply = <&vreg_s4a_1p8>;
vdd-l2-l3-supply = <&vreg_s8c_1p3>;
vdd-l4-l5-l6-supply = <&vreg_bob>;
vdd-l7-l11-supply = <&vreg_bob>;
vdd-l9-l10-supply = <&vreg_bob>;
vdd-bob-supply = <&vph_pwr>;
vdd-flash-supply = <&vreg_bob>;
vdd-rgb-supply = <&vreg_bob>;
vreg_bob: bob {
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <4000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
regulator-allow-bypass;
};
vreg_s8c_1p3: smps8 {
regulator-min-microvolt = <1352000>;
regulator-max-microvolt = <1352000>;
};
vreg_l1c_1p8: ldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vdda_wcss_adcdac_1:
vdda_wcss_adcdac_22:
vreg_l2c_1p3: ldo2 {
regulator-min-microvolt = <1304000>;
regulator-max-microvolt = <1304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vdda_hv_ebi0:
vdda_hv_ebi1:
vdda_hv_ebi2:
vdda_hv_ebi3:
vdda_hv_refgen0:
vdda_qlink_hv_ck:
vreg_l3c_1p2: ldo3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vddpx_5:
vreg_l4c_1p8: ldo4 {
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <2928000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vddpx_6:
vreg_l5c_1p8: ldo5 {
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <2928000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vddpx_2:
vreg_l6c_2p9: ldo6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c_3p0: ldo7 {
regulator-min-microvolt = <2856000>;
regulator-max-microvolt = <3104000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8c_1p8: ldo8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9c_2p9: ldo9 {
regulator-min-microvolt = <2704000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10c_3p3: ldo10 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3312000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11c_3p3: ldo11 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3312000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
pm8009-rpmh-regulators {
compatible = "qcom,pm8009-rpmh-regulators";
qcom,pmic-id = "f";
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vreg_bob>;
vdd-l2-supply = <&vreg_s8c_1p3>;
vdd-l5-l6-supply = <&vreg_bob>;
vreg_l2f_1p2: ldo2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5f_2p85: ldo5 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6f_2p85: ldo6 {
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-min-microvolt = <2856000>;
regulator-max-microvolt = <2856000>;
};
};
};
&i2c1 {
status = "okay";
clock-frequency = <400000>;
bq27742@55 {
compatible = "ti,bq27742";
reg = <0x55>;
};
da7280@4a {
compatible = "dlg,da7280";
reg = <0x4a>;
interrupts-extended = <&tlmm 42 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "da7280_default";
pinctrl-0 = <&da7280_intr_default>;
dlg,actuator-type = "LRA";
dlg,dlg,const-op-mode = <1>;
dlg,dlg,periodic-op-mode = <1>;
dlg,nom-microvolt = <2000000>;
dlg,abs-max-microvolt = <2000000>;
dlg,imax-microamp = <129000>;
dlg,resonant-freq-hz = <180>;
dlg,impd-micro-ohms = <14300000>;
dlg,freq-track-enable;
dlg,bemf-sens-enable;
dlg,mem-array = <
0x06 0x08 0x10 0x11 0x12 0x13 0x14 0x15 0x1c 0x2a
0x33 0x3c 0x42 0x4b 0x4c 0x4e 0x17 0x19 0x27 0x29
0x17 0x19 0x03 0x84 0x5e 0x04 0x08 0x84 0x5d 0x01
0x84 0x5e 0x02 0x00 0xa4 0x5d 0x03 0x84 0x5e 0x06
0x08 0x84 0x5d 0x05 0x84 0x5d 0x06 0x84 0x5e 0x08
0x84 0x5e 0x05 0x8c 0x5e 0x24 0x84 0x5f 0x10 0x84
0x5e 0x05 0x84 0x5e 0x08 0x84 0x5f 0x01 0x8c 0x5e
0x04 0x84 0x5e 0x08 0x84 0x5f 0x11 0x19 0x88 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
>;
};
/* SMB1381 @ 0x44 */
/* MAX34417 @ 0x1c */
};
&i2c4 {
status = "okay";
clock-frequency = <400000>;
/* SMB1355 @ 0x0c */
/* SMB1390 @ 0x10 */
};
&i2c17 {
status = "okay";
clock-frequency = <400000>;
bq27742@55 {
compatible = "ti,bq27742";
reg = <0x55>;
};
};
&i2c19 {
status = "okay";
clock-frequency = <400000>;
/* MAX34417 @ 0x12 */
/* MAX34417 @ 0x1a */
/* MAX34417 @ 0x1e */
};
&pon {
pwrkey {
status = "okay";
};
resin {
compatible = "qcom,pm8941-resin";
interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
debounce = <15625>;
bias-pull-up;
linux,code = <KEY_VOLUMEDOWN>;
};
};
&qupv3_id_0 {
status = "okay";
};
&qupv3_id_1 {
status = "okay";
};
&qupv3_id_2 {
status = "okay";
};
&remoteproc_adsp {
status = "okay";
firmware-name = "qcom/sm8150/microsoft/adsp.mdt";
};
&remoteproc_cdsp {
status = "okay";
firmware-name = "qcom/sm8150/microsoft/cdsp.mdt";
};
&remoteproc_mpss {
status = "okay";
firmware-name = "qcom/sm8150/microsoft/modem.mdt";
};
&remoteproc_slpi {
status = "okay";
firmware-name = "qcom/sm8150/microsoft/slpi.mdt";
};
&tlmm {
gpio-reserved-ranges = <126 4>;
da7280_intr_default: da7280-intr-default {
pins = "gpio42";
function = "gpio";
bias-pull-up;
input-enable;
};
};
&uart2 {
status = "okay";
};
&ufs_mem_hc {
status = "okay";
reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
vcc-supply = <&vreg_l10a_2p5>;
vcc-max-microamp = <750000>;
vccq-supply = <&vreg_l9a_1p2>;
vccq-max-microamp = <700000>;
vccq2-supply = <&vreg_s4a_1p8>;
vccq2-max-microamp = <750000>;
};
&ufs_mem_phy {
status = "okay";
vdda-phy-supply = <&vdda_ufs_2ln_core_1>;
vdda-max-microamp = <90200>;
vdda-pll-supply = <&vreg_l3c_1p2>;
vdda-pll-max-microamp = <19000>;
};
&usb_1_hsphy {
status = "okay";
vdda-pll-supply = <&vdd_usb_hs_core>;
vdda33-supply = <&vdda_usb_hs_3p1>;
vdda18-supply = <&vdda_usb_hs_1p8>;
};
&usb_1_qmpphy {
status = "okay";
vdda-phy-supply = <&vreg_l3c_1p2>;
vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
};
&usb_1 {
status = "okay";
};
&usb_1_dwc3 {
dr_mode = "peripheral";
};
&wifi {
status = "okay";
vdd-0.8-cx-mx-supply = <&vdda_wcss_pll>;
vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
vdd-1.3-rfa-supply = <&vdda_wcss_adcdac_1>;
vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
};

72
arch/arm64/boot/dts/qcom/sm8150.dtsi
View File

@ -4,6 +4,7 @@
* Copyright (c) 2019, Linaro Limited
*/
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/qcom-aoss-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
@ -577,6 +578,29 @@
<&sleep_clk>;
};
gpi_dma0: dma-controller@800000 {
compatible = "qcom,sm8150-gpi-dma";
reg = <0 0x800000 0 0x60000>;
interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
dma-channels = <13>;
dma-channel-mask = <0xfa>;
iommus = <&apps_smmu 0x00d6 0x0>;
#dma-cells = <3>;
status = "disabled";
};
qupv3_id_0: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x008c0000 0x0 0x6000>;
@ -695,6 +719,29 @@
};
gpi_dma1: dma-controller@a00000 {
compatible = "qcom,sm8150-gpi-dma";
reg = <0 0xa00000 0 0x60000>;
interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
dma-channels = <13>;
dma-channel-mask = <0xfa>;
iommus = <&apps_smmu 0x0616 0x0>;
#dma-cells = <3>;
status = "disabled";
};
qupv3_id_1: geniqup@ac0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x00ac0000 0x0 0x6000>;
@ -795,6 +842,29 @@
};
};
gpi_dma2: dma-controller@c00000 {
compatible = "qcom,sm8150-gpi-dma";
reg = <0 0xc00000 0 0x60000>;
interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>;
dma-channels = <13>;
dma-channel-mask = <0xfa>;
iommus = <&apps_smmu 0x07b6 0x0>;
#dma-cells = <3>;
status = "disabled";
};
qupv3_id_2: geniqup@cc0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x00cc0000 0x0 0x6000>;
@ -2268,7 +2338,7 @@
resets = <&gcc GCC_USB30_PRIM_BCR>;
usb_1_dwc3: dwc3@a600000 {
usb_1_dwc3: usb@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;

4
arch/arm64/boot/dts/qcom/sm8250.dtsi
View File

@ -2370,7 +2370,7 @@
};
mdss: mdss@ae00000 {
compatible = "qcom,sdm845-mdss";
compatible = "qcom,sm8250-mdss";
reg = <0 0x0ae00000 0 0x1000>;
reg-names = "mdss";
@ -2402,7 +2402,7 @@
ranges;
mdss_mdp: mdp@ae01000 {
compatible = "qcom,sdm845-dpu";
compatible = "qcom,sm8250-dpu";
reg = <0 0x0ae01000 0 0x8f000>,
<0 0x0aeb0000 0 0x2008>;
reg-names = "mdp", "vbif";

6
arch/arm64/boot/dts/qcom/sm8350-mtp.dts
View File

@ -364,3 +364,9 @@
vdda-phy-supply = <&vreg_l6b_1p2>;
vdda-pll-supply = <&vreg_l5b_0p88>;
};
&ipa {
status = "okay";
memory-region = <&pil_ipa_fw_mem>;
};

64
arch/arm64/boot/dts/qcom/sm8350.dtsi
View File

@ -6,11 +6,13 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-sm8350.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/interconnect/qcom,sm8350.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/power/qcom-aoss-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/interconnect/qcom,sm8350.h>
/ {
interrupt-parent = <&intc>;
@ -391,6 +393,17 @@
interrupt-controller;
#interrupt-cells = <2>;
};
ipa_smp2p_out: ipa-ap-to-modem {
qcom,entry-name = "ipa";
#qcom,smem-state-cells = <1>;
};
ipa_smp2p_in: ipa-modem-to-ap {
qcom,entry-name = "ipa";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smp2p-slpi {
@ -629,6 +642,45 @@
qcom,bcm-voters = <&apps_bcm_voter>;
};
ipa: ipa@1e40000 {
compatible = "qcom,sm8350-ipa";
iommus = <&apps_smmu 0x5c0 0x0>,
<&apps_smmu 0x5c2 0x0>;
reg = <0 0x1e40000 0 0x8000>,
<0 0x1e50000 0 0x4b20>,
<0 0x1e04000 0 0x23000>;
reg-names = "ipa-reg",
"ipa-shared",
"gsi";
interrupts-extended = <&intc GIC_SPI 655 IRQ_TYPE_EDGE_RISING>,
<&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
<&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ipa",
"gsi",
"ipa-clock-query",
"ipa-setup-ready";
clocks = <&rpmhcc RPMH_IPA_CLK>;
clock-names = "core";
interconnects = <&aggre2_noc MASTER_IPA &gem_noc SLAVE_LLCC>,
<&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>;
interconnect-names = "ipa_to_llcc",
"llcc_to_ebi1",
"appss_to_ipa";
qcom,smem-states = <&ipa_smp2p_out 0>,
<&ipa_smp2p_out 1>;
qcom,smem-state-names = "ipa-clock-enabled-valid",
"ipa-clock-enabled";
status = "disabled";
};
tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex";
reg = <0x0 0x01f40000 0x0 0x40000>;
@ -656,7 +708,7 @@
<&rpmhpd 12>;
power-domain-names = "load_state", "cx", "mss";
interconnects = <&mc_virt 0 &mc_virt 1>;
interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>;
memory-region = <&pil_modem_mem>;
@ -689,7 +741,7 @@
interrupt-controller;
};
tsens0: thermal-sensor@c222000 {
tsens0: thermal-sensor@c263000 {
compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
reg = <0 0x0c263000 0 0x1ff>, /* TM */
<0 0x0c222000 0 0x8>; /* SROT */
@ -700,7 +752,7 @@
#thermal-sensor-cells = <1>;
};
tsens1: thermal-sensor@c223000 {
tsens1: thermal-sensor@c265000 {
compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
reg = <0 0x0c265000 0 0x1ff>, /* TM */
<0 0x0c223000 0 0x8>; /* SROT */
@ -1063,7 +1115,7 @@
<&rpmhpd 10>;
power-domain-names = "load_state", "cx", "mxc";
interconnects = <&compute_noc 1 &mc_virt 1>;
interconnects = <&compute_noc MASTER_CDSP_PROC &mc_virt SLAVE_EBI1>;
memory-region = <&pil_cdsp_mem>;
@ -1176,7 +1228,7 @@
};
};
dc_noc: interconnect@90e0000 {
dc_noc: interconnect@90c0000 {
compatible = "qcom,sm8350-dc-noc";
reg = <0 0x090c0000 0 0x4200>;
#interconnect-cells = <1>;
@ -1317,7 +1369,7 @@
};
};
thermal-zones {
thermal_zones: thermal-zones {
cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;

1
include/dt-bindings/mailbox/qcom-ipcc.h
View File

@ -29,5 +29,6 @@
#define IPCC_CLIENT_PCIE1 14
#define IPCC_CLIENT_PCIE2 15
#define IPCC_CLIENT_SPSS 16
#define IPCC_CLIENT_WPSS 24
#endif