diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 9b27e991bddc..2babb95de354 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -178,6 +178,7 @@ properties:
- items:
- enum:
- qcom,sc7280-idp
+ - google,senor
- const: qcom,sc7280
- items:
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 456502aeee49..ec3b2a33eec8 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -5,8 +5,11 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
+dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
+dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
@@ -35,8 +38,8 @@ dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb
-dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r2.dtb
-dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r2-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r0.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-kb.dtb
@@ -51,6 +54,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb
@@ -70,6 +75,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-fajita.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index defcbd15edf9..068692350e00 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -41,14 +41,14 @@
/ {
aliases {
- serial0 = &blsp2_uart1;
- serial1 = &blsp2_uart2;
- serial2 = &blsp1_uart1;
- i2c0 = &blsp1_i2c2;
+ serial0 = &blsp2_uart2;
+ serial1 = &blsp2_uart3;
+ serial2 = &blsp1_uart2;
+ i2c0 = &blsp1_i2c3;
i2c1 = &blsp2_i2c1;
- i2c2 = &blsp2_i2c0;
- spi0 = &blsp1_spi0;
- spi1 = &blsp2_spi5;
+ i2c2 = &blsp2_i2c1;
+ spi0 = &blsp1_spi1;
+ spi1 = &blsp2_spi6;
};
chosen {
@@ -133,24 +133,24 @@
};
};
-&blsp1_i2c2 {
+&blsp1_i2c3 {
/* On Low speed expansion */
label = "LS-I2C0";
status = "okay";
};
-&blsp1_spi0 {
+&blsp1_spi1 {
/* On Low speed expansion */
label = "LS-SPI0";
status = "okay";
};
-&blsp1_uart1 {
+&blsp1_uart2 {
label = "BT-UART";
status = "okay";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_uart1_default>;
- pinctrl-1 = <&blsp1_uart1_sleep>;
+ pinctrl-0 = <&blsp1_uart2_default>;
+ pinctrl-1 = <&blsp1_uart2_sleep>;
bluetooth {
compatible = "qcom,qca6174-bt";
@@ -162,7 +162,11 @@
};
};
-&blsp2_i2c0 {
+&adsp_pil {
+ status = "okay";
+};
+
+&blsp2_i2c1 {
/* On High speed expansion */
label = "HS-I2C2";
status = "okay";
@@ -174,32 +178,36 @@
status = "okay";
};
-&blsp2_spi5 {
+&blsp2_spi6 {
/* On High speed expansion */
label = "HS-SPI1";
status = "okay";
};
-&blsp2_uart1 {
+&blsp2_uart2 {
label = "LS-UART1";
status = "okay";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_uart1_2pins_default>;
- pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
+ pinctrl-0 = <&blsp2_uart2_2pins_default>;
+ pinctrl-1 = <&blsp2_uart2_2pins_sleep>;
};
-&blsp2_uart2 {
+&blsp2_uart3 {
label = "LS-UART0";
status = "disabled";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_uart2_4pins_default>;
- pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
+ pinctrl-0 = <&blsp2_uart3_4pins_default>;
+ pinctrl-1 = <&blsp2_uart3_4pins_sleep>;
};
&camss {
vdda-supply = <&vreg_l2a_1p25>;
};
+&gpu {
+ status = "okay";
+};
+
&hdmi {
status = "okay";
@@ -245,7 +253,12 @@
vdd-gfx-supply = <&vdd_gfx>;
};
-&msmgpio {
+&pm8994_resin {
+ status = "okay";
+ linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&tlmm {
gpio-line-names =
"[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
"[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
@@ -424,7 +437,7 @@
};
};
- blsp1_uart1_default: blsp1_uart1_default {
+ blsp1_uart2_default: blsp1_uart2_default {
mux {
pins = "gpio41", "gpio42", "gpio43", "gpio44";
function = "blsp_uart2";
@@ -437,7 +450,7 @@
};
};
- blsp1_uart1_sleep: blsp1_uart1_sleep {
+ blsp1_uart2_sleep: blsp1_uart2_sleep {
mux {
pins = "gpio41", "gpio42", "gpio43", "gpio44";
function = "gpio";
@@ -505,20 +518,20 @@
&pcie0 {
status = "okay";
- perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+ perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
vddpe-3v3-supply = <&wlan_en>;
vdda-supply = <&vreg_l28a_0p925>;
};
&pcie1 {
status = "okay";
- perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
+ perst-gpio = <&tlmm 130 GPIO_ACTIVE_LOW>;
vdda-supply = <&vreg_l28a_0p925>;
};
&pcie2 {
status = "okay";
- perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
+ perst-gpio = <&tlmm 114 GPIO_ACTIVE_LOW>;
vdda-supply = <&vreg_l28a_0p925>;
};
@@ -929,9 +942,9 @@
&sdhc2 {
/* External SD card */
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
- cd-gpios = <&msmgpio 38 0x1>;
+ pinctrl-0 = <&sdc2_state_on &sdc2_cd_on>;
+ pinctrl-1 = <&sdc2_state_off &sdc2_cd_off>;
+ cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vreg_l21a_2p95>;
vqmmc-supply = <&vreg_l13a_2p95>;
status = "okay";
@@ -1026,20 +1039,6 @@
};
};
-&spmi_bus {
- pmic@0 {
- pon@800 {
- resin {
- compatible = "qcom,pm8941-resin";
- interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
- linux,code = <KEY_VOLUMEDOWN>;
- };
- };
- };
-};
-
&ufsphy {
status = "okay";
@@ -1064,7 +1063,7 @@
status = "okay";
extcon = <&usb2_id>;
- dwc3@7600000 {
+ usb@7600000 {
extcon = <&usb2_id>;
dr_mode = "otg";
maximum-speed = "high-speed";
@@ -1075,7 +1074,7 @@
status = "okay";
extcon = <&usb3_id>;
- dwc3@6a00000 {
+ usb@6a00000 {
extcon = <&usb3_id>;
dr_mode = "otg";
};
@@ -1089,6 +1088,10 @@
};
+&venus {
+ status = "okay";
+};
+
&wcd9335 {
clock-names = "mclk", "slimbus";
clocks = <&div1_mclk>,
diff --git a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
index f6ddf17ada81..8c7a27e972b7 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
@@ -17,7 +17,7 @@
qcom,board-id = <0x00010018 0>;
aliases {
- serial0 = &blsp2_uart1;
+ serial0 = &blsp2_uart2;
};
chosen {
@@ -81,14 +81,22 @@
};
};
-&blsp2_uart1 {
+&blsp2_uart2 {
status = "okay";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_uart1_2pins_default>;
- pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
+ pinctrl-0 = <&blsp2_uart2_2pins_default>;
+ pinctrl-1 = <&blsp2_uart2_2pins_sleep>;
};
-&msmgpio {
+&gpu {
+ status = "okay";
+};
+
+&mdss {
+ status = "okay";
+};
+
+&tlmm {
sdc2_pins_default: sdc2-pins-default {
clk {
pins = "sdc2_clk";
@@ -352,7 +360,7 @@
bus-width = <4>;
- cd-gpios = <&msmgpio 38 0x1>;
+ cd-gpios = <&tlmm 38 0x1>;
vmmc-supply = <&vreg_l21a_2p95>;
vqmmc-supply = <&vreg_l13a_2p95>;
@@ -383,3 +391,7 @@
vdda-phy-max-microamp = <18380>;
vdda-pll-max-microamp = <9440>;
};
+
+&venus {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts
new file mode 100644
index 000000000000..2bfcf42aeabc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
+ */
+/dts-v1/;
+
+#include "ipq8074-hk10.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ8074/AP-HK10-C1";
+ compatible = "qcom,ipq8074-hk10-c1", "qcom,ipq8074";
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts
new file mode 100644
index 000000000000..7da39f1d979b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
+ */
+#include "ipq8074-hk10.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ8074/AP-HK10-C2";
+ compatible = "qcom,ipq8074-hk10-c2", "qcom,ipq8074";
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
new file mode 100644
index 000000000000..07e670829676
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+/dts-v1/;
+
+#include "ipq8074.dtsi"
+
+/ {
+ #address-cells = <0x2>;
+ #size-cells = <0x2>;
+
+ interrupt-parent = <&intc>;
+
+ aliases {
+ serial0 = &blsp1_uart5;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0x0 0x20000000>;
+ };
+};
+
+&blsp1_spi1 {
+ status = "ok";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&blsp1_uart5 {
+ status = "ok";
+};
+
+&pcie0 {
+ status = "ok";
+ perst-gpio = <&tlmm 58 0x1>;
+};
+
+&pcie1 {
+ status = "ok";
+ perst-gpio = <&tlmm 61 0x1>;
+};
+
+&pcie_phy0 {
+ status = "ok";
+};
+
+&pcie_phy1 {
+ status = "ok";
+};
+
+&qpic_bam {
+ status = "ok";
+};
+
+&qpic_nand {
+ status = "ok";
+
+ nand@0 {
+ reg = <0>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index a32e5e79ab0b..7542d1eee62c 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -165,6 +165,7 @@
clock-names = "cfg_ahb", "ref";
resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+ status = "disabled";
};
pcie_phy0: phy@86000 {
@@ -427,7 +428,7 @@
resets = <&gcc GCC_USB0_BCR>;
status = "disabled";
- dwc_0: dwc3@8a00000 {
+ dwc_0: usb@8a00000 {
compatible = "snps,dwc3";
reg = <0x8a00000 0xcd00>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
@@ -468,7 +469,7 @@
resets = <&gcc GCC_USB1_BCR>;
status = "disabled";
- dwc_1: dwc3@8c00000 {
+ dwc_1: usb@8c00000 {
compatible = "snps,dwc3";
reg = <0x8c00000 0xcd00>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
index 540b1fa4b260..670bd1bebd73 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
@@ -45,6 +45,24 @@
status = "okay";
};
+&blsp_i2c4 {
+ status = "okay";
+
+ touchscreen@26 {
+ compatible = "mstar,msg2638";
+ reg = <0x26>;
+ interrupt-parent = <&msmgpio>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_reset_default>;
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l5>;
+ touchscreen-size-x = <2048>;
+ touchscreen-size-y = <2048>;
+ };
+};
+
&blsp_i2c5 {
status = "okay";
@@ -281,6 +299,14 @@
bias-pull-up;
};
+ ts_int_reset_default: ts-int-reset-default {
+ pins = "gpio13", "gpio100";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
usb_id_default: usb-id-default {
pins = "gpio69";
function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
new file mode 100644
index 000000000000..e0075b574190
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
@@ -0,0 +1,454 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2021 Stephan Gerhold
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+
+/*
+ * Note: The original firmware from Huawei can only boot 32-bit kernels.
+ * To boot arm64 kernels it is necessary to flash 64-bit TZ/HYP firmware
+ * with EDL, e.g. taken from the DragonBoard 410c. This works because Huawei
+ * forgot to set up (firmware) secure boot for some reason.
+ *
+ * Also note that Huawei no longer provides bootloader unlock codes.
+ * This can be bypassed by patching the bootloader from a custom HYP firmware,
+ * making it think the bootloader is unlocked.
+ *
+ * See: https://wiki.postmarketos.org/wiki/Huawei_Ascend_G7_(huawei-g7)
+ */
+
+/ {
+ model = "Huawei Ascend G7";
+ compatible = "huawei,g7", "qcom,msm8916";
+
+ aliases {
+ serial0 = &blsp1_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_default>;
+
+ label = "GPIO Buttons";
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_leds_default>;
+
+ led-0 {
+ gpios = <&msmgpio 8 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ default-state = "off";
+ function = LED_FUNCTION_INDICATOR;
+ };
+
+ led-1 {
+ gpios = <&msmgpio 9 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "off";
+ function = LED_FUNCTION_INDICATOR;
+ };
+
+ led-2 {
+ gpios = <&msmgpio 10 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_BLUE>;
+ default-state = "off";
+ function = LED_FUNCTION_INDICATOR;
+ };
+ };
+
+ usb_id: usb-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&msmgpio 117 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_id_default>;
+ };
+};
+
+&blsp_i2c2 {
+ status = "okay";
+
+ magnetometer@c {
+ compatible = "asahi-kasei,ak09911";
+ reg = <0x0c>;
+
+ vdd-supply = <&pm8916_l17>;
+ vid-supply = <&pm8916_l6>;
+
+ reset-gpios = <&msmgpio 36 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mag_reset_default>;
+ };
+
+ accelerometer@1e {
+ compatible = "kionix,kx023-1025";
+ reg = <0x1e>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <115 IRQ_TYPE_EDGE_RISING>;
+
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l6>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&accel_irq_default>;
+
+ mount-matrix = "-1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "1";
+ };
+
+ proximity@39 {
+ compatible = "avago,apds9930";
+ reg = <0x39>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <113 IRQ_TYPE_EDGE_FALLING>;
+
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l6>;
+
+ led-max-microamp = <100000>;
+ amstaos,proximity-diodes = <1>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&prox_irq_default>;
+ };
+
+ regulator@3e {
+ compatible = "ti,tps65132";
+ reg = <0x3e>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <®_lcd_en_default>;
+
+ reg_lcd_pos: outp {
+ regulator-name = "outp";
+ regulator-min-microvolt = <5400000>;
+ regulator-max-microvolt = <5400000>;
+ enable-gpios = <&msmgpio 97 GPIO_ACTIVE_HIGH>;
+ regulator-active-discharge = <1>;
+ };
+
+ reg_lcd_neg: outn {
+ regulator-name = "outn";
+ regulator-min-microvolt = <5400000>;
+ regulator-max-microvolt = <5400000>;
+ enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
+ regulator-active-discharge = <1>;
+ };
+ };
+};
+
+&blsp_i2c5 {
+ status = "okay";
+
+ rmi4@70 {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+ vdd-supply = <&pm8916_l17>;
+ vio-supply = <&pm8916_l16>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_irq_default>;
+
+ syna,startup-delay-ms = <100>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>; /* Allow sleeping */
+ };
+
+ rmi4-f11@11 {
+ reg = <0x11>;
+ syna,sensor-type = <1>; /* Touchscreen */
+ };
+ };
+};
+
+&blsp_i2c6 {
+ status = "okay";
+
+ nfc@28 {
+ compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
+ reg = <0x28>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+ enable-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>;
+ firmware-gpios = <&msmgpio 2 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&nfc_default>;
+ };
+};
+
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&pm8916_resin {
+ status = "okay";
+ linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pm8916_vib {
+ status = "okay";
+};
+
+&pronto {
+ status = "okay";
+};
+
+&sdhc_1 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
+ pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
+};
+
+&sdhc_2 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdhc2_cd_default>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdhc2_cd_default>;
+
+ /*
+ * The Huawei device tree sets cd-gpios = <&msmgpio 38 GPIO_ACTIVE_HIGH>.
+ * However, gpio38 does not change its state when inserting/removing the
+ * SD card, it's just low all the time. The Huawei kernel seems to use
+ * polling for SD card detection instead.
+ *
+ * However, looking closer at the GPIO debug output it turns out that
+ * gpio56 switches its state when inserting/removing the SD card.
+ * It behaves just like gpio38 normally does. Usually GPIO56 is used as
+ * "UIM2_PRESENT", i.e. to check if a second SIM card is inserted.
+ * Maybe Huawei decided to replace the second SIM card slot with the
+ * SD card slot and forgot to re-route to gpio38.
+ */
+ cd-gpios = <&msmgpio 56 GPIO_ACTIVE_LOW>;
+};
+
+&usb {
+ status = "okay";
+ extcon = <&usb_id>, <&usb_id>;
+};
+
+&usb_hs_phy {
+ extcon = <&usb_id>;
+};
+
+&smd_rpm_regulators {
+ vdd_l1_l2_l3-supply = <&pm8916_s3>;
+ vdd_l4_l5_l6-supply = <&pm8916_s4>;
+ vdd_l7-supply = <&pm8916_s4>;
+
+ s3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2100000>;
+ };
+
+ l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ l4 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l8 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ l9 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l10 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ l11 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ regulator-system-load = <200000>;
+ };
+
+ l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ l13 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l16 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ l18 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+};
+
+&msmgpio {
+ accel_irq_default: accel-irq-default {
+ pins = "gpio115";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ gpio_keys_default: gpio-keys-default {
+ pins = "gpio107";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ gpio_leds_default: gpio-leds-default {
+ pins = "gpio8", "gpio9", "gpio10";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ nfc_default: nfc-default {
+ pins = "gpio2", "gpio20", "gpio21";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ mag_reset_default: mag-reset-default {
+ pins = "gpio36";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ prox_irq_default: prox-irq-default {
+ pins = "gpio113";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ reg_lcd_en_default: reg-lcd-en-default {
+ pins = "gpio32", "gpio97";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ sdhc2_cd_default: sdhc2-cd-default {
+ pins = "gpio56";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ ts_irq_default: ts-irq-default {
+ pins = "gpio13";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb_id_default: usb-id-default {
+ pins = "gpio117";
+ function = "gpio";
+
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index 230ba3ce3277..9b4b7de7cec2 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -4,6 +4,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
aliases {
@@ -95,6 +96,63 @@
pinctrl-0 = <&muic_int_default>;
};
};
+
+ i2c-tkey {
+ compatible = "i2c-gpio";
+ sda-gpios = <&msmgpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&msmgpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tkey_i2c_default>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchkey: touchkey@20 {
+ /* Note: Actually an ABOV MCU that implements same interface */
+ compatible = "coreriver,tc360-touchkey";
+ reg = <0x20>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <98 IRQ_TYPE_EDGE_FALLING>;
+
+ /* vcc/vdd-supply are board-specific */
+ vddio-supply = <&pm8916_l6>;
+
+ linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tkey_default>;
+ };
+ };
+
+ i2c-nfc {
+ compatible = "i2c-gpio";
+ sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&nfc_i2c_default>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nfc@27 {
+ compatible = "samsung,s3fwrn5-i2c";
+ reg = <0x27>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+ en-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>;
+ wake-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>;
+
+ clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&nfc_default &nfc_clk_req>;
+ };
+ };
};
&blsp_i2c2 {
@@ -122,6 +180,20 @@
};
};
+&blsp_i2c4 {
+ status = "okay";
+
+ battery@35 {
+ compatible = "richtek,rt5033-battery";
+ reg = <0x35>;
+ interrupt-parent = <&msmgpio>;
+ interrupts = <121 IRQ_TYPE_EDGE_BOTH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&fg_alert_default>;
+ };
+};
+
&blsp1_uart2 {
status = "okay";
};
@@ -284,6 +356,14 @@
bias-disable;
};
+ fg_alert_default: fg-alert-default {
+ pins = "gpio121";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
gpio_keys_default: gpio-keys-default {
pins = "gpio107", "gpio109";
function = "gpio";
@@ -333,6 +413,46 @@
bias-disable;
};
+ nfc_default: nfc-default {
+ pins = "gpio20", "gpio49";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+
+ irq {
+ pins = "gpio21";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ nfc_i2c_default: nfc-i2c-default {
+ pins = "gpio0", "gpio1";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tkey_default: tkey-default {
+ pins = "gpio98";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tkey_i2c_default: tkey-i2c-default {
+ pins = "gpio16", "gpio17";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
tsp_en_default: tsp-en-default {
pins = "gpio73";
function = "gpio";
@@ -341,3 +461,14 @@
bias-disable;
};
};
+
+&pm8916_gpios {
+ nfc_clk_req: nfc-clk-req {
+ pins = "gpio2";
+ function = "func1";
+
+ input-enable;
+ bias-disable;
+ power-source = <PM8916_GPIO_L2>;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
index 661f41ad978b..6cc2eaeb1d33 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
@@ -20,6 +20,37 @@
pinctrl-names = "default";
pinctrl-0 = <&panel_vdd3_default>;
};
+
+ reg_touch_key: regulator-touch-key {
+ compatible = "regulator-fixed";
+ regulator-name = "touch_key";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ gpio = <&msmgpio 86 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tkey_en_default>;
+ };
+
+ reg_key_led: regulator-key-led {
+ compatible = "regulator-fixed";
+ regulator-name = "key_led";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&msmgpio 60 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tkey_led_en_default>;
+ };
+};
+
+&touchkey {
+ vcc-supply = <®_touch_key>;
+ vdd-supply = <®_key_led>;
};
&accelerometer {
@@ -81,6 +112,22 @@
bias-disable;
};
+ tkey_en_default: tkey-en-default {
+ pins = "gpio86";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tkey_led_en_default: tkey-led-en-default {
+ pins = "gpio60";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
ts_int_default: ts-int-default {
pins = "gpio13";
function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
index dd35c3344358..c2eff5aebf85 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
@@ -7,6 +7,19 @@
/ {
model = "Samsung Galaxy A5U (EUR)";
compatible = "samsung,a5u-eur", "qcom,msm8916";
+
+ reg_touch_key: regulator-touch-key {
+ compatible = "regulator-fixed";
+ regulator-name = "touch_key";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&msmgpio 97 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tkey_en_default>;
+ };
};
&accelerometer {
@@ -42,7 +55,20 @@
};
};
+&touchkey {
+ vcc-supply = <®_touch_key>;
+ vdd-supply = <®_touch_key>;
+};
+
&msmgpio {
+ tkey_en_default: tkey-en-default {
+ pins = "gpio97";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
ts_int_default: ts-int-default {
pins = "gpio13";
function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
index baa55643b40f..ffe1a9bd8f70 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
@@ -32,3 +32,7 @@
};
};
};
+
+&tlmm {
+ gpio-reserved-ranges = <85 4>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi
index 5f46a1427f1f..1e1514e9158c 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi
@@ -7,7 +7,7 @@
/ {
aliases {
- serial0 = &blsp2_uart1;
+ serial0 = &blsp2_uart2;
};
chosen {
diff --git a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi
deleted file mode 100644
index ac1ede579361..000000000000
--- a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi
+++ /dev/null
@@ -1,653 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
- */
-
-&msmgpio {
-
- wcd9xxx_intr {
- wcd_intr_default: wcd_intr_default{
- mux {
- pins = "gpio54";
- function = "gpio";
- };
-
- config {
- pins = "gpio54";
- drive-strength = <2>; /* 2 mA */
- bias-pull-down; /* pull down */
- input-enable;
- };
- };
- };
-
- cdc_reset_ctrl {
- cdc_reset_sleep: cdc_reset_sleep {
- mux {
- pins = "gpio64";
- function = "gpio";
- };
- config {
- pins = "gpio64";
- drive-strength = <16>;
- bias-disable;
- output-low;
- };
- };
- cdc_reset_active:cdc_reset_active {
- mux {
- pins = "gpio64";
- function = "gpio";
- };
- config {
- pins = "gpio64";
- drive-strength = <16>;
- bias-pull-down;
- output-high;
- };
- };
- };
-
- blsp1_spi0_default: blsp1_spi0_default {
- pinmux {
- function = "blsp_spi1";
- pins = "gpio0", "gpio1", "gpio3";
- };
- pinmux_cs {
- function = "gpio";
- pins = "gpio2";
- };
- pinconf {
- pins = "gpio0", "gpio1", "gpio3";
- drive-strength = <12>;
- bias-disable;
- };
- pinconf_cs {
- pins = "gpio2";
- drive-strength = <16>;
- bias-disable;
- output-high;
- };
- };
-
- blsp1_spi0_sleep: blsp1_spi0_sleep {
- pinmux {
- function = "gpio";
- pins = "gpio0", "gpio1", "gpio2", "gpio3";
- };
- pinconf {
- pins = "gpio0", "gpio1", "gpio2", "gpio3";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-
- blsp1_i2c2_default: blsp1_i2c2_default {
- pinmux {
- function = "blsp_i2c3";
- pins = "gpio47", "gpio48";
- };
- pinconf {
- pins = "gpio47", "gpio48";
- drive-strength = <16>;
- bias-disable = <0>;
- };
- };
-
- blsp1_i2c2_sleep: blsp1_i2c2_sleep {
- pinmux {
- function = "gpio";
- pins = "gpio47", "gpio48";
- };
- pinconf {
- pins = "gpio47", "gpio48";
- drive-strength = <2>;
- bias-disable = <0>;
- };
- };
-
- blsp2_i2c0_default: blsp2_i2c0 {
- pinmux {
- function = "blsp_i2c7";
- pins = "gpio55", "gpio56";
- };
- pinconf {
- pins = "gpio55", "gpio56";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- blsp2_i2c0_sleep: blsp2_i2c0_sleep {
- pinmux {
- function = "gpio";
- pins = "gpio55", "gpio56";
- };
- pinconf {
- pins = "gpio55", "gpio56";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- blsp2_uart1_2pins_default: blsp2_uart1_2pins {
- pinmux {
- function = "blsp_uart8";
- pins = "gpio4", "gpio5";
- };
- pinconf {
- pins = "gpio4", "gpio5";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- blsp2_uart1_2pins_sleep: blsp2_uart1_2pins_sleep {
- pinmux {
- function = "gpio";
- pins = "gpio4", "gpio5";
- };
- pinconf {
- pins = "gpio4", "gpio5";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- blsp2_uart1_4pins_default: blsp2_uart1_4pins {
- pinmux {
- function = "blsp_uart8";
- pins = "gpio4", "gpio5", "gpio6", "gpio7";
- };
-
- pinconf {
- pins = "gpio4", "gpio5", "gpio6", "gpio7";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- blsp2_uart1_4pins_sleep: blsp2_uart1_4pins_sleep {
- pinmux {
- function = "gpio";
- pins = "gpio4", "gpio5", "gpio6", "gpio7";
- };
-
- pinconf {
- pins = "gpio4", "gpio5", "gpio6", "gpio7";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- blsp2_i2c1_default: blsp2_i2c1 {
- pinmux {
- function = "blsp_i2c8";
- pins = "gpio6", "gpio7";
- };
- pinconf {
- pins = "gpio6", "gpio7";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- blsp2_i2c1_sleep: blsp2_i2c1_sleep {
- pinmux {
- function = "gpio";
- pins = "gpio6", "gpio7";
- };
- pinconf {
- pins = "gpio6", "gpio7";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- blsp2_uart2_2pins_default: blsp2_uart2_2pins {
- pinmux {
- function = "blsp_uart9";
- pins = "gpio49", "gpio50";
- };
- pinconf {
- pins = "gpio49", "gpio50";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- blsp2_uart2_2pins_sleep: blsp2_uart2_2pins_sleep {
- pinmux {
- function = "gpio";
- pins = "gpio49", "gpio50";
- };
- pinconf {
- pins = "gpio49", "gpio50";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- blsp2_uart2_4pins_default: blsp2_uart2_4pins {
- pinmux {
- function = "blsp_uart9";
- pins = "gpio49", "gpio50", "gpio51", "gpio52";
- };
-
- pinconf {
- pins = "gpio49", "gpio50", "gpio51", "gpio52";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- blsp2_uart2_4pins_sleep: blsp2_uart2_4pins_sleep {
- pinmux {
- function = "gpio";
- pins = "gpio49", "gpio50", "gpio51", "gpio52";
- };
-
- pinconf {
- pins = "gpio49", "gpio50", "gpio51", "gpio52";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- blsp2_spi5_default: blsp2_spi5_default {
- pinmux {
- function = "blsp_spi12";
- pins = "gpio85", "gpio86", "gpio88";
- };
- pinmux_cs {
- function = "gpio";
- pins = "gpio87";
- };
- pinconf {
- pins = "gpio85", "gpio86", "gpio88";
- drive-strength = <12>;
- bias-disable;
- };
- pinconf_cs {
- pins = "gpio87";
- drive-strength = <16>;
- bias-disable;
- output-high;
- };
- };
-
- blsp2_spi5_sleep: blsp2_spi5_sleep {
- pinmux {
- function = "gpio";
- pins = "gpio85", "gpio86", "gpio87", "gpio88";
- };
- pinconf {
- pins = "gpio85", "gpio86", "gpio87", "gpio88";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-
- sdc2_clk_on: sdc2_clk_on {
- config {
- pins = "sdc2_clk";
- bias-disable; /* NO pull */
- drive-strength = <16>; /* 16 MA */
- };
- };
-
- sdc2_clk_off: sdc2_clk_off {
- config {
- pins = "sdc2_clk";
- bias-disable; /* NO pull */
- drive-strength = <2>; /* 2 MA */
- };
- };
-
- sdc2_cmd_on: sdc2_cmd_on {
- config {
- pins = "sdc2_cmd";
- bias-pull-up; /* pull up */
- drive-strength = <10>; /* 10 MA */
- };
- };
-
- sdc2_cmd_off: sdc2_cmd_off {
- config {
- pins = "sdc2_cmd";
- bias-pull-up; /* pull up */
- drive-strength = <2>; /* 2 MA */
- };
- };
-
- sdc2_data_on: sdc2_data_on {
- config {
- pins = "sdc2_data";
- bias-pull-up; /* pull up */
- drive-strength = <10>; /* 10 MA */
- };
- };
-
- sdc2_data_off: sdc2_data_off {
- config {
- pins = "sdc2_data";
- bias-pull-up; /* pull up */
- drive-strength = <2>; /* 2 MA */
- };
- };
-
- pcie0_clkreq_default: pcie0_clkreq_default {
- mux {
- pins = "gpio36";
- function = "pci_e0";
- };
-
- config {
- pins = "gpio36";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- pcie0_perst_default: pcie0_perst_default {
- mux {
- pins = "gpio35";
- function = "gpio";
- };
-
- config {
- pins = "gpio35";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-
- pcie0_wake_default: pcie0_wake_default {
- mux {
- pins = "gpio37";
- function = "gpio";
- };
-
- config {
- pins = "gpio37";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- pcie0_clkreq_sleep: pcie0_clkreq_sleep {
- mux {
- pins = "gpio36";
- function = "gpio";
- };
-
- config {
- pins = "gpio36";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- pcie0_wake_sleep: pcie0_wake_sleep {
- mux {
- pins = "gpio37";
- function = "gpio";
- };
-
- config {
- pins = "gpio37";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- pcie1_clkreq_default: pcie1_clkreq_default {
- mux {
- pins = "gpio131";
- function = "pci_e1";
- };
-
- config {
- pins = "gpio131";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- pcie1_perst_default: pcie1_perst_default {
- mux {
- pins = "gpio130";
- function = "gpio";
- };
-
- config {
- pins = "gpio130";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-
- pcie1_wake_default: pcie1_wake_default {
- mux {
- pins = "gpio132";
- function = "gpio";
- };
-
- config {
- pins = "gpio132";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-
- pcie1_clkreq_sleep: pcie1_clkreq_sleep {
- mux {
- pins = "gpio131";
- function = "gpio";
- };
-
- config {
- pins = "gpio131";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- pcie1_wake_sleep: pcie1_wake_sleep {
- mux {
- pins = "gpio132";
- function = "gpio";
- };
-
- config {
- pins = "gpio132";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- pcie2_clkreq_default: pcie2_clkreq_default {
- mux {
- pins = "gpio115";
- function = "pci_e2";
- };
-
- config {
- pins = "gpio115";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- pcie2_perst_default: pcie2_perst_default {
- mux {
- pins = "gpio114";
- function = "gpio";
- };
-
- config {
- pins = "gpio114";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-
- pcie2_wake_default: pcie2_wake_default {
- mux {
- pins = "gpio116";
- function = "gpio";
- };
-
- config {
- pins = "gpio116";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-
- pcie2_clkreq_sleep: pcie2_clkreq_sleep {
- mux {
- pins = "gpio115";
- function = "gpio";
- };
-
- config {
- pins = "gpio115";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- pcie2_wake_sleep: pcie2_wake_sleep {
- mux {
- pins = "gpio116";
- function = "gpio";
- };
-
- config {
- pins = "gpio116";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- cci0_default: cci0_default {
- pinmux {
- function = "cci_i2c";
- pins = "gpio17", "gpio18";
- };
- pinconf {
- pins = "gpio17", "gpio18";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- cci1_default: cci1_default {
- pinmux {
- function = "cci_i2c";
- pins = "gpio19", "gpio20";
- };
- pinconf {
- pins = "gpio19", "gpio20";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- camera_board_default: camera_board_default {
- mux_pwdn {
- function = "gpio";
- pins = "gpio98";
- };
- config_pwdn {
- pins = "gpio98";
- drive-strength = <16>;
- bias-disable;
- };
-
- mux_rst {
- function = "gpio";
- pins = "gpio104";
- };
- config_rst {
- pins = "gpio104";
- drive-strength = <16>;
- bias-disable;
- };
-
- mux_mclk1 {
- function = "cam_mclk";
- pins = "gpio14";
- };
- config_mclk1 {
- pins = "gpio14";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- camera_front_default: camera_front_default {
- mux_pwdn {
- function = "gpio";
- pins = "gpio133";
- };
- config_pwdn {
- pins = "gpio133";
- drive-strength = <16>;
- bias-disable;
- };
-
- mux_rst {
- function = "gpio";
- pins = "gpio23";
- };
- config_rst {
- pins = "gpio23";
- drive-strength = <16>;
- bias-disable;
- };
-
- mux_mclk2 {
- function = "cam_mclk";
- pins = "gpio15";
- };
- config_mclk2 {
- pins = "gpio15";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- camera_rear_default: camera_rear_default {
- mux_pwdn {
- function = "gpio";
- pins = "gpio26";
- };
- config_pwdn {
- pins = "gpio26";
- drive-strength = <16>;
- bias-disable;
- };
-
- mux_rst {
- function = "gpio";
- pins = "gpio25";
- };
- config_rst {
- pins = "gpio25";
- drive-strength = <16>;
- bias-disable;
- };
-
- mux_mclk0 {
- function = "cam_mclk";
- pins = "gpio13";
- };
- config_mclk0 {
- pins = "gpio13";
- drive-strength = <16>;
- bias-disable;
- };
- };
-};
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index ce430ba9c118..9d4f22e625f5 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -6,7 +6,9 @@
#include <dt-bindings/clock/qcom,gcc-msm8996.h>
#include <dt-bindings/clock/qcom,mmcc-msm8996.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,apr.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&intc>;
@@ -43,6 +45,9 @@
enable-method = "psci";
cpu-idle-states = <&CPU_SLEEP_0>;
capacity-dmips-mhz = <1024>;
+ clocks = <&kryocc 0>;
+ operating-points-v2 = <&cluster0_opp>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "cache";
@@ -57,6 +62,9 @@
enable-method = "psci";
cpu-idle-states = <&CPU_SLEEP_0>;
capacity-dmips-mhz = <1024>;
+ clocks = <&kryocc 0>;
+ operating-points-v2 = <&cluster0_opp>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_0>;
};
@@ -67,6 +75,9 @@
enable-method = "psci";
cpu-idle-states = <&CPU_SLEEP_0>;
capacity-dmips-mhz = <1024>;
+ clocks = <&kryocc 1>;
+ operating-points-v2 = <&cluster1_opp>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
compatible = "cache";
@@ -81,6 +92,9 @@
enable-method = "psci";
cpu-idle-states = <&CPU_SLEEP_0>;
capacity-dmips-mhz = <1024>;
+ clocks = <&kryocc 1>;
+ operating-points-v2 = <&cluster1_opp>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_1>;
};
@@ -120,6 +134,227 @@
};
};
+ cluster0_opp: opp_table0 {
+ compatible = "operating-points-v2-kryo-cpu";
+ nvmem-cells = <&speedbin_efuse>;
+ opp-shared;
+
+ /* Nominal fmax for now */
+ opp-307200000 {
+ opp-hz = /bits/ 64 <307200000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-422400000 {
+ opp-hz = /bits/ 64 <422400000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-480000000 {
+ opp-hz = /bits/ 64 <480000000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-556800000 {
+ opp-hz = /bits/ 64 <556800000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-652800000 {
+ opp-hz = /bits/ 64 <652800000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-729600000 {
+ opp-hz = /bits/ 64 <729600000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-844800000 {
+ opp-hz = /bits/ 64 <844800000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-960000000 {
+ opp-hz = /bits/ 64 <960000000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1036800000 {
+ opp-hz = /bits/ 64 <1036800000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1113600000 {
+ opp-hz = /bits/ 64 <1113600000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1190400000 {
+ opp-hz = /bits/ 64 <1190400000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1228800000 {
+ opp-hz = /bits/ 64 <1228800000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1324800000 {
+ opp-hz = /bits/ 64 <1324800000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1401600000 {
+ opp-hz = /bits/ 64 <1401600000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1478400000 {
+ opp-hz = /bits/ 64 <1478400000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1593600000 {
+ opp-hz = /bits/ 64 <1593600000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ };
+
+ cluster1_opp: opp_table1 {
+ compatible = "operating-points-v2-kryo-cpu";
+ nvmem-cells = <&speedbin_efuse>;
+ opp-shared;
+
+ /* Nominal fmax for now */
+ opp-307200000 {
+ opp-hz = /bits/ 64 <307200000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-403200000 {
+ opp-hz = /bits/ 64 <403200000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-480000000 {
+ opp-hz = /bits/ 64 <480000000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-556800000 {
+ opp-hz = /bits/ 64 <556800000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-652800000 {
+ opp-hz = /bits/ 64 <652800000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-729600000 {
+ opp-hz = /bits/ 64 <729600000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-806400000 {
+ opp-hz = /bits/ 64 <806400000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-883200000 {
+ opp-hz = /bits/ 64 <883200000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-940800000 {
+ opp-hz = /bits/ 64 <940800000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1036800000 {
+ opp-hz = /bits/ 64 <1036800000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1113600000 {
+ opp-hz = /bits/ 64 <1113600000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1190400000 {
+ opp-hz = /bits/ 64 <1190400000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1248000000 {
+ opp-hz = /bits/ 64 <1248000000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1324800000 {
+ opp-hz = /bits/ 64 <1324800000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1401600000 {
+ opp-hz = /bits/ 64 <1401600000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1478400000 {
+ opp-hz = /bits/ 64 <1478400000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1555200000 {
+ opp-hz = /bits/ 64 <1555200000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1632000000 {
+ opp-hz = /bits/ 64 <1632000000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1708800000 {
+ opp-hz = /bits/ 64 <1708800000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1785600000 {
+ opp-hz = /bits/ 64 <1785600000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1824000000 {
+ opp-hz = /bits/ 64 <1824000000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1920000000 {
+ opp-hz = /bits/ 64 <1920000000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1996800000 {
+ opp-hz = /bits/ 64 <1996800000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2073600000 {
+ opp-hz = /bits/ 64 <2073600000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2150400000 {
+ opp-hz = /bits/ 64 <2150400000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ };
+
firmware {
scm {
compatible = "qcom,scm-msm8996";
@@ -424,7 +659,7 @@
bits = <1 4>;
};
- gpu_speed_bin: gpu_speed_bin@133 {
+ speedbin_efuse: speedbin@133 {
reg = <0x133 0x1>;
bits = <5 3>;
};
@@ -472,7 +707,7 @@
tcsr_mutex_regs: syscon@740000 {
compatible = "syscon";
- reg = <0x00740000 0x20000>;
+ reg = <0x00740000 0x40000>;
};
tcsr: syscon@7a0000 {
@@ -521,6 +756,8 @@
#size-cells = <1>;
ranges;
+ status = "disabled";
+
mdp: mdp@901000 {
compatible = "qcom,mdp5";
reg = <0x00901000 0x90000>;
@@ -542,6 +779,11 @@
iommus = <&mdp_smmu 0>;
+ assigned-clocks = <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <300000000>,
+ <19200000>;
+
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -552,9 +794,82 @@
remote-endpoint = <&hdmi_in>;
};
};
+
+ port@1 {
+ reg = <1>;
+ mdp5_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
};
};
+ dsi0: dsi@994000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0x00994000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_BYTE0_CLK>,
+ <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MMSS_MISC_AHB_CLK>,
+ <&mmcc MDSS_PCLK0_CLK>,
+ <&mmcc MDSS_ESC0_CLK>;
+ clock-names = "mdp_core",
+ "byte",
+ "iface",
+ "bus",
+ "core_mmss",
+ "pixel",
+ "core";
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&mdp5_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi0_phy: dsi-phy@994400 {
+ compatible = "qcom,dsi-phy-14nm";
+ reg = <0x00994400 0x100>,
+ <0x00994500 0x300>,
+ <0x00994800 0x188>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
+ clock-names = "iface", "ref";
+ status = "disabled";
+ };
+
hdmi: hdmi-tx@9a0000 {
compatible = "qcom,hdmi-tx-8996";
reg = <0x009a0000 0x50c>,
@@ -618,7 +933,8 @@
"ref";
};
};
- gpu@b00000 {
+
+ gpu: gpu@b00000 {
compatible = "qcom,adreno-530.2", "qcom,adreno";
#stream-id-cells = <16>;
@@ -642,7 +958,7 @@
power-domains = <&mmcc GPU_GX_GDSC>;
iommus = <&adreno_smmu 0>;
- nvmem-cells = <&gpu_speed_bin>;
+ nvmem-cells = <&speedbin_efuse>;
nvmem-cell-names = "speed_bin";
qcom,gpu-quirk-two-pass-use-wfi;
@@ -650,6 +966,8 @@
operating-points-v2 = <&gpu_opp_table>;
+ status = "disabled";
+
gpu_opp_table: opp-table {
compatible ="operating-points-v2";
@@ -693,15 +1011,482 @@
};
};
- msmgpio: pinctrl@1010000 {
+ tlmm: pinctrl@1010000 {
compatible = "qcom,msm8996-pinctrl";
reg = <0x01010000 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
- gpio-ranges = <&msmgpio 0 0 150>;
+ gpio-ranges = <&tlmm 0 0 150>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+
+ blsp1_spi1_default: blsp1-spi1-default {
+ spi {
+ pins = "gpio0", "gpio1", "gpio3";
+ function = "blsp_spi1";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ cs {
+ pins = "gpio2";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ blsp1_spi1_sleep: blsp1-spi1-sleep {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ blsp2_uart2_2pins_default: blsp2-uart1-2pins {
+ pins = "gpio4", "gpio5";
+ function = "blsp_uart8";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ blsp2_uart2_2pins_sleep: blsp2-uart1-2pins-sleep {
+ pins = "gpio4", "gpio5";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp2_i2c2_default: blsp2-i2c2 {
+ pins = "gpio6", "gpio7";
+ function = "blsp_i2c8";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ blsp2_i2c2_sleep: blsp2-i2c2-sleep {
+ pins = "gpio6", "gpio7";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cci0_default: cci0-default {
+ pins = "gpio17", "gpio18";
+ function = "cci_i2c";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ camera0_state_on:
+ camera_rear_default: camera-rear-default {
+ mclk0 {
+ pins = "gpio13";
+ function = "cam_mclk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ rst {
+ pins = "gpio25";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ pwdn {
+ pins = "gpio26";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ cci1_default: cci1-default {
+ pins = "gpio19", "gpio20";
+ function = "cci_i2c";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ camera1_state_on:
+ camera_board_default: camera-board-default {
+ mclk1 {
+ pins = "gpio14";
+ function = "cam_mclk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ pwdn {
+ pins = "gpio98";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ rst {
+ pins = "gpio104";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ camera2_state_on:
+ camera_front_default: camera-front-default {
+ mclk2 {
+ pins = "gpio15";
+ function = "cam_mclk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ rst {
+ pins = "gpio23";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ pwdn {
+ pins = "gpio133";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ pcie0_state_on: pcie0-state-on {
+ perst {
+ pins = "gpio35";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq {
+ pins = "gpio36";
+ function = "pci_e0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake {
+ pins = "gpio37";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie0_state_off: pcie0-state-off {
+ perst {
+ pins = "gpio35";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq {
+ pins = "gpio36";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake {
+ pins = "gpio37";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ blsp1_i2c3_default: blsp1-i2c2-default {
+ pins = "gpio47", "gpio48";
+ function = "blsp_i2c3";
+ drive-strength = <16>;
+ bias-disable = <0>;
+ };
+
+ blsp1_i2c3_sleep: blsp1-i2c2-sleep {
+ pins = "gpio47", "gpio48";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable = <0>;
+ };
+
+ blsp2_uart3_4pins_default: blsp2-uart2-4pins {
+ pins = "gpio49", "gpio50", "gpio51", "gpio52";
+ function = "blsp_uart9";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ blsp2_uart3_4pins_sleep: blsp2-uart2-4pins-sleep {
+ pins = "gpio49", "gpio50", "gpio51", "gpio52";
+ function = "blsp_uart9";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wcd_intr_default: wcd-intr-default{
+ pins = "gpio54";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ input-enable;
+ };
+
+ blsp2_i2c1_default: blsp2-i2c1 {
+ pins = "gpio55", "gpio56";
+ function = "blsp_i2c7";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ blsp2_i2c1_sleep: blsp2-i2c0-sleep {
+ pins = "gpio55", "gpio56";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp2_i2c5_default: blsp2-i2c5 {
+ pins = "gpio60", "gpio61";
+ function = "blsp_i2c11";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ /* Sleep state for BLSP2_I2C5 is missing.. */
+
+ cdc_reset_active: cdc-reset-active {
+ pins = "gpio64";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-pull-down;
+ output-high;
+ };
+
+ cdc_reset_sleep: cdc-reset-sleep {
+ pins = "gpio64";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+
+ blsp2_spi6_default: blsp2-spi5-default {
+ spi {
+ pins = "gpio85", "gpio86", "gpio88";
+ function = "blsp_spi12";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ cs {
+ pins = "gpio87";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ blsp2_spi6_sleep: blsp2-spi5-sleep {
+ pins = "gpio85", "gpio86", "gpio87", "gpio88";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ blsp2_i2c6_default: blsp2-i2c6 {
+ pins = "gpio87", "gpio88";
+ function = "blsp_i2c12";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ blsp2_i2c6_sleep: blsp2-i2c6-sleep {
+ pins = "gpio87", "gpio88";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pcie1_state_on: pcie1-state-on {
+ perst {
+ pins = "gpio130";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq {
+ pins = "gpio131";
+ function = "pci_e1";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake {
+ pins = "gpio132";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ pcie1_state_off: pcie1-state-off {
+ /* Perst is missing? */
+ clkreq {
+ pins = "gpio131";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake {
+ pins = "gpio132";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ pcie2_state_on: pcie2-state-on {
+ perst {
+ pins = "gpio114";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq {
+ pins = "gpio115";
+ function = "pci_e2";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake {
+ pins = "gpio116";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ pcie2_state_off: pcie2-state-off {
+ /* Perst is missing? */
+ clkreq {
+ pins = "gpio115";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake {
+ pins = "gpio116";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ sdc1_state_on: sdc1-state-on {
+ clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc1_state_off: sdc1-state-off {
+ clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc2_state_on: sdc2-clk-on {
+ clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ };
+
+ sdc2_state_off: sdc2-clk-off {
+ clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
};
spmi_bus: qcom,spmi@400f000 {
@@ -762,8 +1547,8 @@
<0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&pcie0_clkreq_default &pcie0_perst_default &pcie0_wake_default>;
- pinctrl-1 = <&pcie0_clkreq_sleep &pcie0_perst_default &pcie0_wake_sleep>;
+ pinctrl-0 = <&pcie0_state_on>;
+ pinctrl-1 = <&pcie0_state_off>;
linux,pci-domain = <0>;
@@ -816,8 +1601,8 @@
<0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&pcie1_clkreq_default &pcie1_perst_default &pcie1_wake_default>;
- pinctrl-1 = <&pcie1_clkreq_sleep &pcie1_perst_default &pcie1_wake_sleep>;
+ pinctrl-0 = <&pcie1_state_on>;
+ pinctrl-1 = <&pcie1_state_off>;
linux,pci-domain = <1>;
@@ -867,8 +1652,8 @@
<0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>;
- pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >;
+ pinctrl-0 = <&pcie2_state_on>;
+ pinctrl-1 = <&pcie2_state_off>;
linux,pci-domain = <2>;
clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
@@ -1152,7 +1937,7 @@
power-domains = <&mmcc GPU_GDSC>;
};
- video-codec@c00000 {
+ venus: video-codec@c00000 {
compatible = "qcom,msm8996-venus";
reg = <0x00c00000 0xff000>;
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
@@ -1183,7 +1968,7 @@
<&venus_smmu 0x2d>,
<&venus_smmu 0x31>;
memory-region = <&venus_region>;
- status = "okay";
+ status = "disabled";
video-decoder {
compatible = "venus-decoder";
@@ -1745,9 +2530,14 @@
};
};
};
+
kryocc: clock-controller@6400000 {
- compatible = "qcom,apcc-msm8996";
+ compatible = "qcom,msm8996-apcc";
reg = <0x06400000 0x90000>;
+
+ clock-names = "xo";
+ clocks = <&xo_board>;
+
#clock-cells = <1>;
};
@@ -1758,6 +2548,10 @@
#size-cells = <1>;
ranges;
+ interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
<&gcc GCC_USB30_MASTER_CLK>,
<&gcc GCC_AGGRE2_USB3_AXI_CLK>,
@@ -1772,7 +2566,7 @@
power-domains = <&gcc USB30_GDSC>;
status = "disabled";
- dwc3@6a00000 {
+ usb@6a00000 {
compatible = "snps,dwc3";
reg = <0x06a00000 0xcc00>;
interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
@@ -1841,34 +2635,75 @@
status = "disabled";
};
+ sdhc1: sdhci@7464900 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0x07464900 0x11c>, <0x07464000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clock-names = "iface", "core", "xo";
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>,
+ <&xo_board>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_state_on>;
+ pinctrl-1 = <&sdc1_state_off>;
+
+ bus-width = <8>;
+ non-removable;
+ status = "disabled";
+ };
+
sdhc2: sdhci@74a4900 {
- status = "disabled";
- compatible = "qcom,sdhci-msm-v4";
- reg = <0x074a4900 0x314>, <0x074a4000 0x800>;
- reg-names = "hc_mem", "core_mem";
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0x074a4900 0x314>, <0x074a4000 0x800>;
+ reg-names = "hc_mem", "core_mem";
- interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>,
- <0 221 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
- clock-names = "iface", "core", "xo";
- clocks = <&gcc GCC_SDCC2_AHB_CLK>,
- <&gcc GCC_SDCC2_APPS_CLK>,
- <&xo_board>;
- bus-width = <4>;
+ clock-names = "iface", "core", "xo";
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
+ <&xo_board>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_state_on>;
+ pinctrl-1 = <&sdc2_state_off>;
+
+ bus-width = <4>;
+ status = "disabled";
};
- blsp1_uart1: serial@7570000 {
+ blsp1_dma: dma@7544000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x07544000 0x2b000>;
+ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "bam_clk";
+ qcom,controlled-remotely;
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+ blsp1_uart2: serial@7570000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x07570000 0x1000>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
+ dma-names = "tx", "rx";
status = "disabled";
};
- blsp1_spi0: spi@7575000 {
+ blsp1_spi1: spi@7575000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x07575000 0x600>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
@@ -1876,14 +2711,16 @@
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_spi0_default>;
- pinctrl-1 = <&blsp1_spi0_sleep>;
+ pinctrl-0 = <&blsp1_spi1_default>;
+ pinctrl-1 = <&blsp1_spi1_sleep>;
+ dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
- blsp1_i2c2: i2c@7577000 {
+ blsp1_i2c3: i2c@7577000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x07577000 0x1000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
@@ -1891,14 +2728,27 @@
<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
clock-names = "iface", "core";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_i2c2_default>;
- pinctrl-1 = <&blsp1_i2c2_sleep>;
+ pinctrl-0 = <&blsp1_i2c3_default>;
+ pinctrl-1 = <&blsp1_i2c3_sleep>;
+ dmas = <&blsp1_dma 16>, <&blsp1_dma 17>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
- blsp2_uart1: serial@75b0000 {
+ blsp2_dma: dma@7584000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x07584000 0x2b000>;
+ interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "bam_clk";
+ qcom,controlled-remotely;
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+ blsp2_uart2: serial@75b0000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x075b0000 0x1000>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
@@ -1908,7 +2758,7 @@
status = "disabled";
};
- blsp2_uart2: serial@75b1000 {
+ blsp2_uart3: serial@75b1000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x075b1000 0x1000>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
@@ -1918,7 +2768,7 @@
status = "disabled";
};
- blsp2_i2c0: i2c@75b5000 {
+ blsp2_i2c1: i2c@75b5000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x075b5000 0x1000>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
@@ -1926,14 +2776,16 @@
<&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
clock-names = "iface", "core";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_i2c0_default>;
- pinctrl-1 = <&blsp2_i2c0_sleep>;
+ pinctrl-0 = <&blsp2_i2c1_default>;
+ pinctrl-1 = <&blsp2_i2c1_sleep>;
+ dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
- blsp2_i2c1: i2c@75b6000 {
+ blsp2_i2c2: i2c@75b6000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x075b6000 0x1000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
@@ -1941,14 +2793,49 @@
<&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>;
clock-names = "iface", "core";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_i2c1_default>;
- pinctrl-1 = <&blsp2_i2c1_sleep>;
+ pinctrl-0 = <&blsp2_i2c2_default>;
+ pinctrl-1 = <&blsp2_i2c2_sleep>;
+ dmas = <&blsp2_dma 14>, <&blsp2_dma 15>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
- blsp2_spi5: spi@75ba000{
+ blsp2_i2c5: i2c@75b9000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x75b9000 0x1000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+ <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default";
+ pinctrl-0 = <&blsp2_i2c5_default>;
+ dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp2_i2c6: i2c@75ba000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x75ba000 0x1000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+ <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_i2c6_default>;
+ pinctrl-1 = <&blsp2_i2c6_sleep>;
+ dmas = <&blsp2_dma 22>, <&blsp2_dma 23>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp2_spi6: spi@75ba000{
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x075ba000 0x600>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
@@ -1956,8 +2843,10 @@
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_spi5_default>;
- pinctrl-1 = <&blsp2_spi5_sleep>;
+ pinctrl-0 = <&blsp2_spi6_default>;
+ pinctrl-1 = <&blsp2_spi6_sleep>;
+ dmas = <&blsp2_dma 22>, <&blsp2_dma 23>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1981,14 +2870,16 @@
assigned-clock-rates = <19200000>, <60000000>;
power-domains = <&gcc USB30_GDSC>;
+ qcom,select-utmi-as-pipe-clk;
status = "disabled";
- dwc3@7600000 {
+ usb@7600000 {
compatible = "snps,dwc3";
reg = <0x07600000 0xcc00>;
interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
phys = <&hsusb_phy2>;
phy-names = "usb2-phy";
+ maximum-speed = "high-speed";
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
};
@@ -2032,13 +2923,13 @@
compatible = "slim217,1a0";
reg = <1 0>;
- interrupt-parent = <&msmgpio>;
+ interrupt-parent = <&tlmm>;
interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
<53 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "intr1", "intr2";
interrupt-controller;
#interrupt-cells = <1>;
- reset-gpios = <&msmgpio 64 0>;
+ reset-gpios = <&tlmm 64 0>;
slim-ifc-dev = <&tasha_ifd>;
@@ -2067,6 +2958,11 @@
qcom,smem-states = <&smp2p_adsp_out 0>;
qcom,smem-state-names = "stop";
+ power-domains = <&rpmpd MSM8996_VDDCX>;
+ power-domain-names = "cx";
+
+ status = "disabled";
+
smd-edge {
interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
@@ -2458,4 +3354,3 @@
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
};
};
-#include "msm8996-pins.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index e9d3ce29937c..6f294f9c0cdf 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -1964,7 +1964,7 @@
resets = <&gcc GCC_USB_30_BCR>;
- usb3_dwc3: dwc3@a800000 {
+ usb3_dwc3: usb@a800000 {
compatible = "snps,dwc3";
reg = <0x0a800000 0xcd00>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi
index 8ab4f1f78bbf..8a4972e6a24c 100644
--- a/arch/arm64/boot/dts/qcom/pm6150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi
@@ -7,6 +7,30 @@
#include <dt-bindings/spmi/spmi.h>
#include <dt-bindings/thermal/thermal.h>
+/ {
+ thermal-zones {
+ pm6150_thermal: pm6150-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm6150_temp>;
+
+ trips {
+ pm6150_trip0: trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ pm6150_crit: crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
+};
+
&spmi_bus {
pm6150_lsid0: pmic@0 {
compatible = "qcom,pm6150", "qcom,spmi-pmic";
diff --git a/arch/arm64/boot/dts/qcom/pm7325.dtsi b/arch/arm64/boot/dts/qcom/pm7325.dtsi
new file mode 100644
index 000000000000..e7f64a9ddc9c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm7325.dtsi
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: BSD-3-Clause
+// Copyright (c) 2021, The Linux Foundation. All rights reserved.
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+ pm7325: pmic@1 {
+ compatible = "qcom,pm7325", "qcom,spmi-pmic";
+ reg = <0x1 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm7325_temp_alarm: temp-alarm@a00 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0xa00>;
+ interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ pm7325_gpios: gpios@8800 {
+ compatible = "qcom,pm7325-gpio", "qcom,spmi-gpio";
+ reg = <0x8800>;
+ gpio-controller;
+ gpio-ranges = <&pm7325_gpios 0 0 10>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+};
+
+&thermal_zones {
+ pm7325_thermal: pm7325-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm7325_temp_alarm>;
+
+ trips {
+ pm7325_trip0: trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ pm7325_crit: pm7325-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8350c.dtsi b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
index 2b9b75ecec60..e1b75ae0a823 100644
--- a/arch/arm64/boot/dts/qcom/pm8350c.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
@@ -13,13 +13,43 @@
#address-cells = <1>;
#size-cells = <0>;
+ pm8350c_temp_alarm: temp-alarm@a00 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0xa00>;
+ interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+ #thermal-sensor-cells = <0>;
+ };
+
pm8350c_gpios: gpio@8800 {
- compatible = "qcom,pm8350c-gpio";
+ compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
+ gpio-ranges = <&pm8350c_gpios 0 0 9>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
};
+
+&thermal_zones {
+ pm8350c_thermal: pm8350c-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8350c_temp_alarm>;
+
+ trips {
+ pm8350c_trip0: trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ pm8350c_crit: pm8350c-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi
index c3876c82c874..ad19016df047 100644
--- a/arch/arm64/boot/dts/qcom/pm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi
@@ -45,7 +45,6 @@
pm8994_pon: pon@800 {
compatible = "qcom,pm8916-pon";
-
reg = <0x800>;
mode-bootloader = <0x2>;
mode-recovery = <0x1>;
@@ -58,6 +57,13 @@
linux,code = <KEY_POWER>;
};
+ pm8994_resin: resin {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ status = "disabled";
+ };
};
pm8994_temp: temp-alarm@2400 {
diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
index e5ed28ab9b2d..b4ac900ab115 100644
--- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
@@ -32,5 +32,18 @@
#address-cells = <1>;
#size-cells = <1>;
};
+
+ pmi8994_wled: wled@d800 {
+ compatible = "qcom,pmi8994-wled";
+ reg = <0xd800 0xd900>;
+ interrupts = <3 0xd8 0x02 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "short";
+ qcom,num-strings = <3>;
+ /* Yes, all four strings *have to* be defined or things won't work. */
+ qcom,enabled-strings = <0 1 2 3>;
+ qcom,cabc;
+ qcom,eternal-pfet;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
index 1530b8ff270f..04fc2632a0b2 100644
--- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -3,6 +3,8 @@
* Copyright (c) 2021, Linaro Limited
*/
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
@@ -13,10 +15,57 @@
#address-cells = <1>;
#size-cells = <0>;
+ pmk8350_pon: pon@1300 {
+ compatible = "qcom,pm8998-pon";
+ reg = <0x1300>;
+
+ pwrkey {
+ compatible = "qcom,pmk8350-pwrkey";
+ interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
+ linux,code = <KEY_POWER>;
+ };
+
+ resin {
+ compatible = "qcom,pmk8350-resin";
+ interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+
+ pmk8350_vadc: adc@3100 {
+ compatible = "qcom,spmi-adc7";
+ reg = <0x3100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "eoc-int-en-set";
+ #io-channel-cells = <1>;
+ io-channel-ranges;
+ };
+
+ pmk8350_adc_tm: adc-tm@3400 {
+ compatible = "qcom,adc-tm7";
+ reg = <0x3400>;
+ interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "threshold";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #thermal-sensor-cells = <1>;
+ status = "disabled";
+ };
+
+ pmk8350_rtc: rtc@6100 {
+ compatible = "qcom,pmk8350-rtc";
+ reg = <0x6100>, <0x6200>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+ };
+
pmk8350_gpios: gpio@b000 {
- compatible = "qcom,pmk8350-gpio";
+ compatible = "qcom,pmk8350-gpio", "qcom,spmi-gpio";
reg = <0xb000>;
gpio-controller;
+ gpio-ranges = <&pmk8350_gpios 0 0 4>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pmr735a.dtsi b/arch/arm64/boot/dts/qcom/pmr735a.dtsi
index 1c675af13cbf..b4b6ba24f845 100644
--- a/arch/arm64/boot/dts/qcom/pmr735a.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmr735a.dtsi
@@ -13,13 +13,43 @@
#address-cells = <1>;
#size-cells = <0>;
+ pmr735a_temp_alarm: temp-alarm@a00 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0xa00>;
+ interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+ #thermal-sensor-cells = <0>;
+ };
+
pmr735a_gpios: gpio@8800 {
- compatible = "qcom,pmr735a-gpio";
+ compatible = "qcom,pmr735a-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
+ gpio-ranges = <&pmr735a_gpios 0 0 4>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
};
+
+&thermal_zones {
+ pmr735a_thermal: pmr735a-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&pmr735a_temp_alarm>;
+
+ trips {
+ pmr735a_trip0: trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ pmr735a_crit: pmr735a-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index a80c578484ba..f8a55307b855 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -337,7 +337,7 @@
&usb3 {
status = "okay";
- dwc3@7580000 {
+ usb@7580000 {
dr_mode = "host";
};
};
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 339790ba585d..9c4be020d568 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -544,7 +544,7 @@
assigned-clock-rates = <19200000>, <200000000>;
status = "disabled";
- dwc3@7580000 {
+ usb@7580000 {
compatible = "snps,dwc3";
reg = <0x07580000 0xcd00>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -573,7 +573,7 @@
assigned-clock-rates = <19200000>, <133333333>;
status = "disabled";
- dwc3@78c0000 {
+ usb@78c0000 {
compatible = "snps,dwc3";
reg = <0x078c0000 0xcc00>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index e77a7926034a..acdb36f4479f 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -9,6 +9,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include "sc7180.dtsi"
#include "pm6150.dtsi"
#include "pm6150l.dtsi"
@@ -45,7 +46,7 @@
/* Increase the size from 2MB to 8MB */
&rmtfs_mem {
- reg = <0x0 0x84400000 0x0 0x800000>;
+ reg = <0x0 0x94600000 0x0 0x800000>;
};
/ {
@@ -288,6 +289,57 @@
};
};
+&dsi0 {
+ status = "okay";
+
+ vdda-supply = <&vreg_l3c_1p2>;
+
+ panel@0 {
+ compatible = "visionox,rm69299-1080p-display";
+ reg = <0>;
+
+ vdda-supply = <&vreg_l8c_1p8>;
+ vdd3p3-supply = <&vreg_l18a_2p8>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&disp_pins>;
+
+ reset-gpios = <&pm6150l_gpio 3 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ panel0_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&panel0_in>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+};
+
+&dsi_phy {
+ status = "okay";
+};
+
+&mdp {
+ status = "okay";
+};
+
+&mdss {
+ status = "okay";
+};
+
&qfprom {
vcc-supply = <&vreg_l11a_1p8>;
};
@@ -414,6 +466,19 @@
/* PINCTRL - additions to nodes defined in sc7180.dtsi */
+&pm6150l_gpio {
+ disp_pins: disp-pins {
+ pinconf {
+ pins = "gpio3";
+ function = PMIC_GPIO_FUNC_FUNC1;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_MED>;
+ power-source = <0>;
+ bias-disable;
+ output-low;
+ };
+ };
+};
+
&qspi_clk {
pinconf {
pins = "gpio63";
@@ -598,4 +663,106 @@
bias-pull-up;
};
};
+
+ sdc1_on: sdc1-on {
+ pinconf-clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ pinconf-cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ pinconf-data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ pinconf-rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc1_off: sdc1-off {
+ pinconf-clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ pinconf-cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf-data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf-rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc2_on: sdc2-on {
+ pinconf-clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ pinconf-cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ pinconf-data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ pinconf-sd-cd {
+ pins = "gpio69";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc2_off: sdc2-off {
+ pinconf-clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ pinconf-cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf-data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf-sd-cd {
+ pins = "gpio69";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts
index 533c048903ea..82dc00cc7fb9 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts
@@ -9,8 +9,8 @@
#include "sc7180-trogdor-lte-sku.dtsi"
/ {
- model = "Google CoachZ (rev1) with LTE";
- compatible = "google,coachz-rev1-sku0", "qcom,sc7180";
+ model = "Google CoachZ (rev1 - 2) with LTE";
+ compatible = "google,coachz-rev1-sku0", "google,coachz-rev2-sku0", "qcom,sc7180";
};
&cros_ec_proximity {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts
index 1b1dbdb2a82f..21b516e0694a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts
@@ -10,8 +10,26 @@
#include "sc7180-trogdor-coachz.dtsi"
/ {
- model = "Google CoachZ (rev1)";
- compatible = "google,coachz-rev1", "qcom,sc7180";
+ model = "Google CoachZ (rev1 - 2)";
+ compatible = "google,coachz-rev1", "google,coachz-rev2", "qcom,sc7180";
+};
+
+/*
+ * CoachZ rev1 is stuffed with a 47k NTC as charger thermistor which currently
+ * is not supported by the PM6150 ADC driver. Disable the charger thermal zone
+ * to avoid using bogus temperature values.
+ */
+&charger_thermal {
+ status = "disabled";
+};
+
+/*
+ * CoachZ rev1 is stuffed with a 47k NTC as thermistor for skin temperature,
+ * which currently is not supported by the PM6150 ADC driver. Disable the
+ * skin temperature thermal zone to avoid using bogus temperature values.
+ */
+&skin_temp_thermal {
+ status = "disabled";
};
&tlmm {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dts
similarity index 69%
rename from arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2-lte.dts
rename to arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dts
index 6e7745801fae..d23409034e8c 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2-lte.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dts
@@ -2,14 +2,14 @@
/*
* Google CoachZ board device tree source
*
- * Copyright 2020 Google LLC.
+ * Copyright 2021 Google LLC.
*/
-#include "sc7180-trogdor-coachz-r2.dts"
+#include "sc7180-trogdor-coachz-r3.dts"
#include "sc7180-trogdor-lte-sku.dtsi"
/ {
- model = "Google CoachZ (rev2+) with LTE";
+ model = "Google CoachZ (rev3+) with LTE";
compatible = "google,coachz-sku0", "qcom,sc7180";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dts
similarity index 75%
rename from arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2.dts
rename to arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dts
index 4f69b6ba299f..a02d2d57c78c 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dts
@@ -2,7 +2,7 @@
/*
* Google CoachZ board device tree source
*
- * Copyright 2020 Google LLC.
+ * Copyright 2021 Google LLC.
*/
/dts-v1/;
@@ -10,6 +10,6 @@
#include "sc7180-trogdor-coachz.dtsi"
/ {
- model = "Google CoachZ (rev2+)";
+ model = "Google CoachZ (rev3+)";
compatible = "google,coachz", "qcom,sc7180";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
index 4c6e433c8226..6f9c07147551 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
@@ -23,8 +23,53 @@ ap_h1_spi: &spi0 {};
adau7002: audio-codec-1 {
compatible = "adi,adau7002";
IOVDD-supply = <&pp1800_l15a>;
+ wakeup-delay-ms = <15>;
#sound-dai-cells = <0>;
};
+
+ thermal-zones {
+ skin_temp_thermal: skin-temp-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&pm6150_adc_tm 1>;
+ sustainable-power = <814>;
+
+ trips {
+ skin_temp_alert0: trip-point0 {
+ temperature = <42000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ skin_temp_alert1: trip-point1 {
+ temperature = <45000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ skin-temp-crit {
+ temperature = <60000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&skin_temp_alert0>;
+ cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ map1 {
+ trip = <&skin_temp_alert1>;
+ cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
};
&ap_spi_fp {
@@ -77,6 +122,25 @@ ap_ts_pen_1v8: &i2c4 {
compatible = "boe,nv110wtm-n61";
};
+&pm6150_adc {
+ skin-temp-thermistor@4e {
+ reg = <ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm6150_adc_tm {
+ status = "okay";
+
+ skin-temp-thermistor@1 {
+ reg = <1>;
+ io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
&pp3300_dx_edp {
gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
index 5c997cd90069..30e3e769d2b4 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
@@ -14,15 +14,6 @@
compatible = "google,lazor-rev0", "qcom,sc7180";
};
-/*
- * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
- * not supported by the PM6150 ADC driver. Disable the charger thermal zone
- * to avoid using bogus temperature values.
- */
-&charger_thermal {
- status = "disabled";
-};
-
&pp3300_hub {
/* pp3300_l7c is used to power the USB hub */
/delete-property/regulator-always-on;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
index d9fbcc7bc5bd..c2ef06367baf 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
@@ -14,15 +14,6 @@
compatible = "google,lazor-rev1", "google,lazor-rev2", "qcom,sc7180";
};
-/*
- * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
- * not supported by the PM6150 ADC driver. Disable the charger thermal zone
- * to avoid using bogus temperature values.
- */
-&charger_thermal {
- status = "disabled";
-};
-
&pp3300_hub {
/* pp3300_l7c is used to power the USB hub */
/delete-property/regulator-always-on;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts
index ea8c2ee09741..b474df47cd70 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts
@@ -14,12 +14,3 @@
model = "Google Lazor (rev3+)";
compatible = "google,lazor", "qcom,sc7180";
};
-
-/*
- * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
- * not supported by the PM6150 ADC driver. Disable the charger thermal zone
- * to avoid using bogus temperature values.
- */
-&charger_thermal {
- status = "disabled";
-};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
index 6b10b96173e8..00535aaa43c9 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
@@ -21,6 +21,15 @@ ap_h1_spi: &spi0 {};
semtech,avg-pos-strength = <64>;
};
+/*
+ * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
+ * not supported by the PM6150 ADC driver. Disable the charger thermal zone
+ * to avoid using bogus temperature values.
+ */
+&charger_thermal {
+ status = "disabled";
+};
+
ap_ts_pen_1v8: &i2c4 {
status = "okay";
clock-frequency = <400000>;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts
index e720e7bd0d70..e122a6b481ff 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts
@@ -9,11 +9,23 @@
#include "sc7180-trogdor-pompom.dtsi"
+/delete-node/ &keyboard_controller;
+#include <arm/cros-ec-keyboard.dtsi>
+
/ {
model = "Google Pompom (rev1)";
compatible = "google,pompom-rev1", "qcom,sc7180";
};
+/*
+ * Pompom rev1 is stuffed with a 47k NTC as charger thermistor which currently
+ * is not supported by the PM6150 ADC driver. Disable the charger thermal zone
+ * to avoid using bogus temperature values.
+ */
+&charger_thermal {
+ status = "disabled";
+};
+
&pp3300_hub {
/* pp3300_l7c is used to power the USB hub */
/delete-property/regulator-always-on;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts
index 791d496ad046..00e187c08eb9 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts
@@ -9,6 +9,6 @@
#include "sc7180-trogdor-lte-sku.dtsi"
/ {
- model = "Google Pompom (rev2+) with LTE";
- compatible = "google,pompom-sku0", "qcom,sc7180";
+ model = "Google Pompom (rev2) with LTE";
+ compatible = "google,pompom-rev2-sku0", "qcom,sc7180";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts
index 984d7337da78..4f32e6733f4c 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts
@@ -10,35 +10,15 @@
#include "sc7180-trogdor-pompom.dtsi"
/ {
- model = "Google Pompom (rev2+)";
- compatible = "google,pompom", "qcom,sc7180";
+ model = "Google Pompom (rev2)";
+ compatible = "google,pompom-rev2", "qcom,sc7180";
};
-&keyboard_controller {
- function-row-physmap = <
- MATRIX_KEY(0x00, 0x02, 0) /* T1 */
- MATRIX_KEY(0x03, 0x02, 0) /* T2 */
- MATRIX_KEY(0x02, 0x02, 0) /* T3 */
- MATRIX_KEY(0x01, 0x02, 0) /* T4 */
- MATRIX_KEY(0x03, 0x04, 0) /* T5 */
- MATRIX_KEY(0x02, 0x04, 0) /* T6 */
- MATRIX_KEY(0x01, 0x04, 0) /* T7 */
- MATRIX_KEY(0x02, 0x09, 0) /* T8 */
- MATRIX_KEY(0x01, 0x09, 0) /* T9 */
- MATRIX_KEY(0x00, 0x04, 0) /* T10 */
- >;
- linux,keymap = <
- MATRIX_KEY(0x00, 0x02, KEY_BACK)
- MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
- MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
- MATRIX_KEY(0x01, 0x02, KEY_SCALE)
- MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
- MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
- MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
- MATRIX_KEY(0x02, 0x09, KEY_MUTE)
- MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
- MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
-
- CROS_STD_MAIN_KEYMAP
- >;
+/*
+ * Pompom rev2 is stuffed with a 47k NTC as charger thermistor which currently
+ * is not supported by the PM6150 ADC driver. Disable the charger thermal zone
+ * to avoid using bogus temperature values.
+ */
+&charger_thermal {
+ status = "disabled";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dts
new file mode 100644
index 000000000000..e90b73c353bb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pompom board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+#include "sc7180-trogdor-pompom-r3.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+ model = "Google Pompom (rev3+) with LTE";
+ compatible = "google,pompom-sku0", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dts
new file mode 100644
index 000000000000..f8aac63a53ef
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pompom board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-pompom.dtsi"
+
+/ {
+ model = "Google Pompom (rev3+)";
+ compatible = "google,pompom", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
index 622b5f1b88a2..a246dbd74cc1 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
@@ -107,6 +107,35 @@ ap_ts_pen_1v8: &i2c4 {
};
};
+&keyboard_controller {
+ function-row-physmap = <
+ MATRIX_KEY(0x00, 0x02, 0) /* T1 */
+ MATRIX_KEY(0x03, 0x02, 0) /* T2 */
+ MATRIX_KEY(0x02, 0x02, 0) /* T3 */
+ MATRIX_KEY(0x01, 0x02, 0) /* T4 */
+ MATRIX_KEY(0x03, 0x04, 0) /* T5 */
+ MATRIX_KEY(0x02, 0x04, 0) /* T6 */
+ MATRIX_KEY(0x01, 0x04, 0) /* T7 */
+ MATRIX_KEY(0x02, 0x09, 0) /* T8 */
+ MATRIX_KEY(0x01, 0x09, 0) /* T9 */
+ MATRIX_KEY(0x00, 0x04, 0) /* T10 */
+ >;
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x02, KEY_BACK)
+ MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+ MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+ MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+ MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+ MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+ MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+ MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+ MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+
+ CROS_STD_MAIN_KEYMAP
+ >;
+};
+
&panel {
compatible = "kingdisplay,kd116n21-30nv-a010";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 24d293ef56d7..77ae7561d436 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -64,11 +64,6 @@
no-map;
};
- camera_mem: memory@8ec00000 {
- reg = <0x0 0x8ec00000 0x0 0x500000>;
- no-map;
- };
-
venus_mem: memory@8f600000 {
reg = <0 0x8f600000 0 0x500000>;
no-map;
@@ -335,8 +330,7 @@
compatible = "jedec,spi-nor";
reg = <0>;
- /* TODO: Increase frequency after testing */
- spi-max-frequency = <25000000>;
+ spi-max-frequency = <37500000>;
spi-tx-bus-width = <2>;
spi-rx-bus-width = <2>;
};
@@ -564,10 +558,6 @@
#size-cells = <0>;
};
- pdupdate {
- compatible = "google,cros-ec-pd-update";
- };
-
typec {
compatible = "google,cros-ec-typec";
#address-cells = <1>;
@@ -655,6 +645,8 @@ edp_brij_i2c: &i2c2 {
clocks = <&rpmhcc RPMH_LN_BB_CLK3>;
clock-names = "refclk";
+ no-hpd;
+
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -772,7 +764,7 @@ hp_i2c: &i2c9 {
qcom,capture-sd-lines = <0>;
};
- mi2s@1 {
+ secondary_mi2s: mi2s@1 {
reg = <MI2S_SECONDARY>;
qcom,playback-sd-lines = <0>;
};
@@ -805,7 +797,7 @@ hp_i2c: &i2c9 {
};
};
-&pm6150_pwrkey {
+&pm6150_pon {
status = "disabled";
};
@@ -981,6 +973,7 @@ ap_spi_fp: &spi10 {
&qspi_clk {
pinconf {
pins = "gpio63";
+ drive-strength = <8>;
bias-disable;
};
};
@@ -1494,4 +1487,106 @@ ap_spi_fp: &spi10 {
drive-strength = <2>;
};
};
+
+ sdc1_on: sdc1-on {
+ pinconf-clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ pinconf-cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ pinconf-data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ pinconf-rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc1_off: sdc1-off {
+ pinconf-clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ pinconf-cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf-data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf-rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc2_on: sdc2-on {
+ pinconf-clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ pinconf-cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ pinconf-data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ pinconf-sd-cd {
+ pins = "gpio69";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc2_off: sdc2-off {
+ pinconf-clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ pinconf-cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf-data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf-sd-cd {
+ pins = "gpio69";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 6228ba2d8513..fb1d9ad8bf6c 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -701,8 +701,9 @@
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
- <&gcc GCC_SDCC1_AHB_CLK>;
- clock-names = "core", "iface";
+ <&gcc GCC_SDCC1_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "core", "iface", "xo";
interconnects = <&aggre1_noc MASTER_EMMC 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_EMMC_CFG 0>;
interconnect-names = "sdhc-ddr","cpu-sdhc";
@@ -768,8 +769,6 @@
#size-cells = <2>;
ranges;
iommus = <&apps_smmu 0x43 0x0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>;
- interconnect-names = "qup-core";
status = "disabled";
i2c0: i2c@880000 {
@@ -1059,8 +1058,6 @@
#size-cells = <2>;
ranges;
iommus = <&apps_smmu 0x4c3 0x0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>;
- interconnect-names = "qup-core";
status = "disabled";
i2c6: i2c@a80000 {
@@ -1871,108 +1868,6 @@
function = "lpass_ext";
};
};
-
- sdc1_on: sdc1-on {
- pinconf-clk {
- pins = "sdc1_clk";
- bias-disable;
- drive-strength = <16>;
- };
-
- pinconf-cmd {
- pins = "sdc1_cmd";
- bias-pull-up;
- drive-strength = <10>;
- };
-
- pinconf-data {
- pins = "sdc1_data";
- bias-pull-up;
- drive-strength = <10>;
- };
-
- pinconf-rclk {
- pins = "sdc1_rclk";
- bias-pull-down;
- };
- };
-
- sdc1_off: sdc1-off {
- pinconf-clk {
- pins = "sdc1_clk";
- bias-disable;
- drive-strength = <2>;
- };
-
- pinconf-cmd {
- pins = "sdc1_cmd";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- pinconf-data {
- pins = "sdc1_data";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- pinconf-rclk {
- pins = "sdc1_rclk";
- bias-pull-down;
- };
- };
-
- sdc2_on: sdc2-on {
- pinconf-clk {
- pins = "sdc2_clk";
- bias-disable;
- drive-strength = <16>;
- };
-
- pinconf-cmd {
- pins = "sdc2_cmd";
- bias-pull-up;
- drive-strength = <10>;
- };
-
- pinconf-data {
- pins = "sdc2_data";
- bias-pull-up;
- drive-strength = <10>;
- };
-
- pinconf-sd-cd {
- pins = "gpio69";
- bias-pull-up;
- drive-strength = <2>;
- };
- };
-
- sdc2_off: sdc2-off {
- pinconf-clk {
- pins = "sdc2_clk";
- bias-disable;
- drive-strength = <2>;
- };
-
- pinconf-cmd {
- pins = "sdc2_cmd";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- pinconf-data {
- pins = "sdc2_data";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- pinconf-sd-cd {
- pins = "gpio69";
- bias-disable;
- drive-strength = <2>;
- };
- };
};
remoteproc_mpss: remoteproc@4080000 {
@@ -2670,8 +2565,9 @@
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_APPS_CLK>,
- <&gcc GCC_SDCC2_AHB_CLK>;
- clock-names = "core", "iface";
+ <&gcc GCC_SDCC2_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "core", "iface", "xo";
interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
@@ -2754,8 +2650,8 @@
usb_1_qmpphy: phy-wrapper@88e9000 {
compatible = "qcom,sc7180-qmp-usb3-dp-phy";
reg = <0 0x088e9000 0 0x18c>,
- <0 0x088e8000 0 0x38>,
- <0 0x088ea000 0 0x40>;
+ <0 0x088e8000 0 0x3c>,
+ <0 0x088ea000 0 0x18c>;
status = "disabled";
#address-cells = <2>;
#size-cells = <2>;
@@ -2860,7 +2756,7 @@
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>;
interconnect-names = "usb-ddr", "apps-usb";
- usb_1_dwc3: dwc3@a600000 {
+ usb_1_dwc3: usb@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xe000>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index 54d2cb365b71..3900cfc09562 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -7,11 +7,19 @@
/dts-v1/;
+#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmr735b.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
#include "sc7280.dtsi"
+#include "pm7325.dtsi"
+#include "pmr735a.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
/ {
model = "Qualcomm Technologies, Inc. sc7280 IDP platform";
- compatible = "qcom,sc7280-idp", "qcom,sc7280";
+ compatible = "qcom,sc7280-idp", "google,senor", "qcom,sc7280";
aliases {
serial0 = &uart5;
@@ -234,6 +242,32 @@
};
};
+&pmk8350_vadc {
+ pm8350_die_temp {
+ reg = <PM8350_ADC7_DIE_TEMP>;
+ label = "pm8350_die_temp";
+ qcom,pre-scaling = <1 1>;
+ };
+
+ pmk8350_die_temp {
+ reg = <PMK8350_ADC7_DIE_TEMP>;
+ label = "pmk8350_die_temp";
+ qcom,pre-scaling = <1 1>;
+ };
+
+ pmr735a_die_temp {
+ reg = <PMR735A_ADC7_DIE_TEMP>;
+ label = "pmr735a_die_temp";
+ qcom,pre-scaling = <1 1>;
+ };
+
+ pmr735b_die_temp {
+ reg = <PMR735B_ADC7_DIE_TEMP>;
+ label = "pmr735b_die_temp";
+ qcom,pre-scaling = <1 1>;
+ };
+};
+
&qupv3_id_0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 2cc478553935..a8c274ad74c4 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -11,7 +11,10 @@
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/power/qcom-aoss-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,sdm845-aoss.h>
+#include <dt-bindings/reset/qcom,sdm845-pdc.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&intc>;
@@ -51,6 +54,11 @@
no-map;
};
+ smem_mem: memory@80900000 {
+ reg = <0x0 0x80900000 0x0 0x200000>;
+ no-map;
+ };
+
cpucp_mem: memory@80b00000 {
no-map;
reg = <0x0 0x80b00000 0x0 0x100000>;
@@ -70,6 +78,8 @@
&LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
next-level-cache = <&L2_0>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ #cooling-cells = <2>;
L2_0: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -88,6 +98,8 @@
&LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
next-level-cache = <&L2_100>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ #cooling-cells = <2>;
L2_100: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -103,6 +115,8 @@
&LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
next-level-cache = <&L2_200>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ #cooling-cells = <2>;
L2_200: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -118,6 +132,8 @@
&LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
next-level-cache = <&L2_300>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ #cooling-cells = <2>;
L2_300: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -133,6 +149,8 @@
&BIG_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
next-level-cache = <&L2_400>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ #cooling-cells = <2>;
L2_400: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -148,6 +166,8 @@
&BIG_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
next-level-cache = <&L2_500>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ #cooling-cells = <2>;
L2_500: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -163,6 +183,8 @@
&BIG_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
next-level-cache = <&L2_600>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ #cooling-cells = <2>;
L2_600: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -178,6 +200,8 @@
&BIG_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
next-level-cache = <&L2_700>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ #cooling-cells = <2>;
L2_700: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -251,6 +275,125 @@
};
};
+ clk_virt: interconnect {
+ compatible = "qcom,sc7280-clk-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_mem>;
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ smp2p-adsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ adsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ adsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-cdsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <94>, <432>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <5>;
+
+ cdsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ cdsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-mpss {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ modem_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ modem_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ ipa_smp2p_out: ipa-ap-to-modem {
+ qcom,entry-name = "ipa";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ ipa_smp2p_in: ipa-modem-to-ap {
+ qcom,entry-name = "ipa";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-wpss {
+ compatible = "qcom,smp2p";
+ qcom,smem = <617>, <616>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_WPSS
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <13>;
+
+ wpss_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ wpss_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
@@ -316,6 +459,93 @@
};
};
+ cnoc2: interconnect@1500000 {
+ reg = <0 0x01500000 0 0x1000>;
+ compatible = "qcom,sc7280-cnoc2";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ cnoc3: interconnect@1502000 {
+ reg = <0 0x01502000 0 0x1000>;
+ compatible = "qcom,sc7280-cnoc3";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mc_virt: interconnect@1580000 {
+ reg = <0 0x01580000 0 0x4>;
+ compatible = "qcom,sc7280-mc-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ system_noc: interconnect@1680000 {
+ reg = <0 0x01680000 0 0x15480>;
+ compatible = "qcom,sc7280-system-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ aggre1_noc: interconnect@16e0000 {
+ compatible = "qcom,sc7280-aggre1-noc";
+ reg = <0 0x016e0000 0 0x1c080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ aggre2_noc: interconnect@1700000 {
+ reg = <0 0x01700000 0 0x2b080>;
+ compatible = "qcom,sc7280-aggre2-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mmss_noc: interconnect@1740000 {
+ reg = <0 0x01740000 0 0x1e080>;
+ compatible = "qcom,sc7280-mmss-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ tcsr_mutex: hwlock@1f40000 {
+ compatible = "qcom,tcsr-mutex", "syscon";
+ reg = <0 0x01f40000 0 0x40000>;
+ #hwlock-cells = <1>;
+ };
+
+ lpasscc: lpasscc@3000000 {
+ compatible = "qcom,sc7280-lpasscc";
+ reg = <0 0x03000000 0 0x40>,
+ <0 0x03c04000 0 0x4>,
+ <0 0x03389000 0 0x24>;
+ reg-names = "qdsp6ss", "top_cc", "cc";
+ clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>;
+ clock-names = "iface";
+ #clock-cells = <1>;
+ };
+
+ lpass_ag_noc: interconnect@3c40000 {
+ reg = <0 0x03c40000 0 0xf080>;
+ compatible = "qcom,sc7280-lpass-ag-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ gpucc: clock-controller@3d90000 {
+ compatible = "qcom,sc7280-gpucc";
+ reg = <0 0x03d90000 0 0x9000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+ <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+ clock-names = "bi_tcxo",
+ "gcc_gpu_gpll0_clk_src",
+ "gcc_gpu_gpll0_div_clk_src";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
stm@6002000 {
compatible = "arm,coresight-stm", "arm,primecell";
reg = <0 0x06002000 0 0x1000>,
@@ -805,6 +1035,20 @@
};
};
+ dc_noc: interconnect@90e0000 {
+ reg = <0 0x090e0000 0 0x5080>;
+ compatible = "qcom,sc7280-dc-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ gem_noc: interconnect@9100000 {
+ reg = <0 0x9100000 0 0xe2200>;
+ compatible = "qcom,sc7280-gem-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
system-cache-controller@9200000 {
compatible = "qcom,sc7280-llcc";
reg = <0 0x09200000 0 0xd0000>, <0 0x09600000 0 0x50000>;
@@ -812,6 +1056,42 @@
interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
};
+ nsp_noc: interconnect@a0c0000 {
+ reg = <0 0x0a0c0000 0 0x10000>;
+ compatible = "qcom,sc7280-nsp-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ videocc: clock-controller@aaf0000 {
+ compatible = "qcom,sc7280-videocc";
+ reg = <0 0xaaf0000 0 0x10000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>;
+ clock-names = "bi_tcxo", "bi_tcxo_ao";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ dispcc: clock-controller@af00000 {
+ compatible = "qcom,sc7280-dispcc";
+ reg = <0 0xaf00000 0 0x20000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+ <0>, <0>, <0>, <0>, <0>, <0>;
+ clock-names = "bi_tcxo", "gcc_disp_gpll0_clk",
+ "dsi0_phy_pll_out_byteclk",
+ "dsi0_phy_pll_out_dsiclk",
+ "dp_phy_pll_link_clk",
+ "dp_phy_pll_vco_div_clk",
+ "edp_phy_pll_link_clk",
+ "edp_phy_pll_vco_div_clk";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
pdc: interrupt-controller@b220000 {
compatible = "qcom,sc7280-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>;
@@ -825,6 +1105,40 @@
interrupt-controller;
};
+ pdc_reset: reset-controller@b5e0000 {
+ compatible = "qcom,sc7280-pdc-global";
+ reg = <0 0x0b5e0000 0 0x20000>;
+ #reset-cells = <1>;
+ };
+
+ tsens0: thermal-sensor@c263000 {
+ compatible = "qcom,sc7280-tsens","qcom,tsens-v2";
+ reg = <0 0x0c263000 0 0x1ff>, /* TM */
+ <0 0x0c222000 0 0x1ff>; /* SROT */
+ #qcom,sensors = <15>;
+ interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow","critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal-sensor@c265000 {
+ compatible = "qcom,sc7280-tsens","qcom,tsens-v2";
+ reg = <0 0x0c265000 0 0x1ff>, /* TM */
+ <0 0x0c223000 0 0x1ff>; /* SROT */
+ #qcom,sensors = <12>;
+ interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow","critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ aoss_reset: reset-controller@c2a0000 {
+ compatible = "qcom,sc7280-aoss-cc", "qcom,sdm845-aoss-cc";
+ reg = <0 0x0c2a0000 0 0x31000>;
+ #reset-cells = <1>;
+ };
+
aoss_qmp: power-controller@c300000 {
compatible = "qcom,sc7280-aoss-qmp";
reg = <0 0x0c300000 0 0x100000>;
@@ -1063,6 +1377,10 @@
<WAKE_TCS 3>,
<CONTROL_TCS 1>;
+ apps_bcm_voter: bcm-voter {
+ compatible = "qcom,bcm-voter";
+ };
+
rpmhpd: power-controller {
compatible = "qcom,sc7280-rpmhpd";
#power-domain-cells = <1>;
@@ -1116,6 +1434,859 @@
#clock-cells = <1>;
};
};
+
+ cpufreq_hw: cpufreq@18591000 {
+ compatible = "qcom,cpufreq-epss";
+ reg = <0 0x18591000 0 0x1000>,
+ <0 0x18592000 0 0x1000>,
+ <0 0x18593000 0 0x1000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+ clock-names = "xo", "alternate";
+ #freq-domain-cells = <1>;
+ };
+ };
+
+ thermal_zones: thermal-zones {
+ cpu0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 1>;
+
+ trips {
+ cpu0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu0_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu0_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 2>;
+
+ trips {
+ cpu1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu1_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu1_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 3>;
+
+ trips {
+ cpu2_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu2_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu2_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu3-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 4>;
+
+ trips {
+ cpu3_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu3_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu3_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu3_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu3_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu4-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ cpu4_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu4_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu4_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu4_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu4_alert1>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu5-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 8>;
+
+ trips {
+ cpu5_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu5_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu5_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu5_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu5_alert1>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu6-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 9>;
+
+ trips {
+ cpu6_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu6_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu6_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu6_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu6_alert1>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu7-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 10>;
+
+ trips {
+ cpu7_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu7_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu7_alert1>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu8-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ cpu8_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu8_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu8_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu8_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu8_alert1>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu9-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 12>;
+
+ trips {
+ cpu9_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu9_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu9_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu9_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu9_alert1>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu10-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 13>;
+
+ trips {
+ cpu10_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu10_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu10_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu10_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu10_alert1>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu11-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 14>;
+
+ trips {
+ cpu11_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu11_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu11_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu11_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu11_alert1>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ aoss0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 0>;
+
+ trips {
+ aoss0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ aoss0_crit: aoss0-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ aoss1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 0>;
+
+ trips {
+ aoss1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ aoss1_crit: aoss1-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 5>;
+
+ trips {
+ cpuss0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ cpuss0_crit: cluster0-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ cpuss1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ cpuss1_crit: cluster0-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ gpuss0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ gpuss0_crit: gpuss0-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ gpuss1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ gpuss1_crit: gpuss1-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nspss0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 3>;
+
+ trips {
+ nspss0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ nspss0_crit: nspss0-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nspss1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ nspss1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ nspss1_crit: nspss1-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ video-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ video_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ video_crit: video-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ ddr-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 6>;
+
+ trips {
+ ddr_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ ddr_crit: ddr-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ mdmss0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 7>;
+
+ trips {
+ mdmss0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ mdmss0_crit: mdmss0-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ mdmss1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 8>;
+
+ trips {
+ mdmss1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ mdmss1_crit: mdmss1-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ mdmss2-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 9>;
+
+ trips {
+ mdmss2_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ mdmss2_crit: mdmss2-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ mdmss3-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 10>;
+
+ trips {
+ mdmss3_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ mdmss3_crit: mdmss3-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ camera0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 11>;
+
+ trips {
+ camera0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ camera0_crit: camera0-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
};
timer {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index 216a74f0057c..dfd1b42c07fd 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -714,10 +714,6 @@ ap_ts_i2c: &i2c14 {
#address-cells = <1>;
#size-cells = <0>;
};
-
- pdupdate {
- compatible = "google,cros-ec-pd-update";
- };
};
};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index 1372fe8601f5..91ede9296aff 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -448,6 +448,11 @@
clock-frequency = <400000>;
};
+&ipa {
+ status = "okay";
+ memory-region = <&ipa_fw_mem>;
+};
+
&mdss {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index 8f617f7b6d34..4d052e39b348 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -46,6 +46,14 @@
};
reserved-memory {
+ /* The rmtfs_mem needs to be guarded due to "XPU limitations"
+ * it is otherwise possible for an allocation adjacent to the
+ * rmtfs_mem region to trigger an XPU violation, causing a crash.
+ */
+ rmtfs_lower_guard: memory@f5b00000 {
+ no-map;
+ reg = <0 0xf5b00000 0 0x1000>;
+ };
/*
* The rmtfs memory region in downstream is 'dynamically allocated'
* but given the same address every time. Hard code it as this address is
@@ -59,6 +67,10 @@
qcom,client-id = <1>;
qcom,vmid = <15>;
};
+ rmtfs_upper_guard: memory@f5d01000 {
+ no-map;
+ reg = <0 0xf5d01000 0 0x2000>;
+ };
/*
* It seems like reserving the old rmtfs_mem region is also needed to prevent
@@ -387,6 +399,12 @@
};
};
+&ipa {
+ status = "okay";
+
+ memory-region = <&ipa_fw_mem>;
+};
+
&mdss {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
index 7d029425336e..c60c8c640e17 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
@@ -5,6 +5,8 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
#include "sdm845.dtsi"
#include "pm8998.dtsi"
#include "pmi8998.dtsi"
@@ -311,6 +313,28 @@
};
};
+/* QUAT I2S Uses 1 I2S SD Line for audio on TAS2559/60 amplifiers */
+&q6afedai {
+ qi2s@22 {
+ reg = <22>;
+ qcom,sd-lines = <0>;
+ };
+};
+
+&q6asmdai {
+ dai@0 {
+ reg = <0>;
+ };
+
+ dai@1 {
+ reg = <1>;
+ };
+
+ dai@2 {
+ reg = <2>;
+ };
+};
+
&qupv3_id_0 {
status = "okay";
};
@@ -328,6 +352,70 @@
cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;
};
+&sound {
+ compatible = "qcom,db845c-sndcard";
+ pinctrl-0 = <&quat_mi2s_active
+ &quat_mi2s_sd0_active>;
+ pinctrl-names = "default";
+ model = "Xiaomi Poco F1";
+ audio-routing =
+ "RX_BIAS", "MCLK",
+ "AMIC1", "MIC BIAS1",
+ "AMIC2", "MIC BIAS2",
+ "AMIC3", "MIC BIAS3";
+
+ mm1-dai-link {
+ link-name = "MultiMedia1";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+ };
+ };
+
+ mm2-dai-link {
+ link-name = "MultiMedia2";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+ };
+ };
+
+ mm3-dai-link {
+ link-name = "MultiMedia3";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+ };
+ };
+
+ slim-dai-link {
+ link-name = "SLIM Playback";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_0_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9340 0>;
+ };
+ };
+
+ slimcap-dai-link {
+ link-name = "SLIM Capture";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_0_TX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9340 1>;
+ };
+ };
+};
+
&tlmm {
gpio-reserved-ranges = <0 4>, <81 4>;
@@ -356,6 +444,15 @@
function = "gpio";
bias-pull-up;
};
+
+ wcd_intr_default: wcd_intr_default {
+ pins = <54>;
+ function = "gpio";
+
+ input-enable;
+ bias-pull-down;
+ drive-strength = <2>;
+ };
};
&uart6 {
@@ -416,6 +513,23 @@
vdda-pll-supply = <&vreg_l1a_0p875>;
};
+&wcd9340{
+ pinctrl-0 = <&wcd_intr_default>;
+ pinctrl-names = "default";
+ clock-names = "extclk";
+ clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+ reset-gpios = <&tlmm 64 0>;
+ vdd-buck-supply = <&vreg_s4a_1p8>;
+ vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+ vdd-tx-supply = <&vreg_s4a_1p8>;
+ vdd-rx-supply = <&vreg_s4a_1p8>;
+ vdd-io-supply = <&vreg_s4a_1p8>;
+ qcom,micbias1-microvolt = <2700000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <2700000>;
+ qcom,micbias4-microvolt = <2700000>;
+};
+
&wifi {
status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 0a86fe71a66d..1796ae8372be 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3781,7 +3781,7 @@
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
interconnect-names = "usb-ddr", "apps-usb";
- usb_1_dwc3: dwc3@a600000 {
+ usb_1_dwc3: usb@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
@@ -3829,7 +3829,7 @@
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
interconnect-names = "usb-ddr", "apps-usb";
- usb_2_dwc3: dwc3@a800000 {
+ usb_2_dwc3: usb@a800000 {
compatible = "snps,dwc3";
reg = <0 0x0a800000 0 0xcd00>;
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 140db2d5ba31..c2a709a384e9 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -376,6 +376,8 @@
clocks = <&sn65dsi86_refclk>;
clock-names = "refclk";
+ no-hpd;
+
ports {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
new file mode 100644
index 000000000000..736da9af44e0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
@@ -0,0 +1,543 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (C) 2021, Microsoft Corporation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "sm8150.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+
+/ {
+ model = "Microsoft Surface Duo";
+ compatible = "microsoft,surface-duo", "qcom,sm8150";
+
+ aliases {
+ serial0 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+
+ /*
+ * Apparently RPMh does not provide support for PM8150 S4 because it
+ * is always-on; model it as a fixed regulator.
+ */
+ vreg_s4a_1p8: pm8150-s4 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s4a_1p8";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ vin-supply = <&vph_pwr>;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ vol_up {
+ label = "Volume Up";
+ gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+};
+
+&apps_rsc {
+ pm8150-rpmh-regulators {
+ compatible = "qcom,pm8150-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+
+ vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
+ vdd-l2-l10-supply = <&vreg_bob>;
+ vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>;
+ vdd-l6-l9-supply = <&vreg_s8c_1p3>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
+ vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+ vreg_s5a_2p0: smps5 {
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ vreg_s6a_0p9: smps6 {
+ regulator-min-microvolt = <920000>;
+ regulator-max-microvolt = <1128000>;
+ };
+
+ vdda_wcss_pll:
+ vreg_l1a_0p75: ldo1 {
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <752000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_pdphy:
+ vdda_usb_hs_3p1:
+ vreg_l2a_3p1: ldo2 {
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3a_0p8: ldo3 {
+ regulator-min-microvolt = <480000>;
+ regulator-max-microvolt = <932000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_usb_hs_core:
+ vdda_csi_0_0p9:
+ vdda_csi_1_0p9:
+ vdda_csi_2_0p9:
+ vdda_csi_3_0p9:
+ vdda_dsi_0_0p9:
+ vdda_dsi_1_0p9:
+ vdda_dsi_0_pll_0p9:
+ vdda_dsi_1_pll_0p9:
+ vdda_pcie_1ln_core:
+ vdda_pcie_2ln_core:
+ vdda_pll_hv_cc_ebi01:
+ vdda_pll_hv_cc_ebi23:
+ vdda_qrefs_0p875_5:
+ vdda_sp_sensor:
+ vdda_ufs_2ln_core_1:
+ vdda_ufs_2ln_core_2:
+ vdda_usb_ss_dp_core_1:
+ vdda_usb_ss_dp_core_2:
+ vdda_qlink_lv:
+ vdda_qlink_lv_ck:
+ vreg_l5a_0p875: ldo5 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6a_1p2: ldo6 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a_1p8: ldo7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_10:
+ vreg_l9a_1p2: ldo9 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10a_2p5: ldo10 {
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11a_0p8: ldo11 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_qfprom:
+ vdd_qfprom_sp:
+ vdda_apc_cs_1p8:
+ vdda_gfx_cs_1p8:
+ vdda_usb_hs_1p8:
+ vdda_qrefs_vref_1p8:
+ vddpx_10_a:
+ vreg_l12a_1p8: ldo12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13a_2p7: ldo13 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2704000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14a_1p8: ldo14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15a_1p7: ldo15 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1704000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16a_2p7: ldo16 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17a_3p0: ldo17 {
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ pm8150l-rpmh-regulators {
+ compatible = "qcom,pm8150l-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+
+ vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+ vdd-l2-l3-supply = <&vreg_s8c_1p3>;
+ vdd-l4-l5-l6-supply = <&vreg_bob>;
+ vdd-l7-l11-supply = <&vreg_bob>;
+ vdd-l9-l10-supply = <&vreg_bob>;
+
+ vdd-bob-supply = <&vph_pwr>;
+ vdd-flash-supply = <&vreg_bob>;
+ vdd-rgb-supply = <&vreg_bob>;
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <4000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ regulator-allow-bypass;
+ };
+
+ vreg_s8c_1p3: smps8 {
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ };
+
+ vreg_l1c_1p8: ldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_wcss_adcdac_1:
+ vdda_wcss_adcdac_22:
+ vreg_l2c_1p3: ldo2 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_hv_ebi0:
+ vdda_hv_ebi1:
+ vdda_hv_ebi2:
+ vdda_hv_ebi3:
+ vdda_hv_refgen0:
+ vdda_qlink_hv_ck:
+ vreg_l3c_1p2: ldo3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_5:
+ vreg_l4c_1p8: ldo4 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_6:
+ vreg_l5c_1p8: ldo5 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_2:
+ vreg_l6c_2p9: ldo6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c_3p0: ldo7 {
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <3104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c_1p8: ldo8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c_2p9: ldo9 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10c_3p3: ldo10 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11c_3p3: ldo11 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ pm8009-rpmh-regulators {
+ compatible = "qcom,pm8009-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vreg_bob>;
+
+ vdd-l2-supply = <&vreg_s8c_1p3>;
+ vdd-l5-l6-supply = <&vreg_bob>;
+
+ vreg_l2f_1p2: ldo2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5f_2p85: ldo5 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6f_2p85: ldo6 {
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <2856000>;
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ bq27742@55 {
+ compatible = "ti,bq27742";
+ reg = <0x55>;
+ };
+
+ da7280@4a {
+ compatible = "dlg,da7280";
+ reg = <0x4a>;
+ interrupts-extended = <&tlmm 42 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "da7280_default";
+ pinctrl-0 = <&da7280_intr_default>;
+
+ dlg,actuator-type = "LRA";
+ dlg,dlg,const-op-mode = <1>;
+ dlg,dlg,periodic-op-mode = <1>;
+ dlg,nom-microvolt = <2000000>;
+ dlg,abs-max-microvolt = <2000000>;
+ dlg,imax-microamp = <129000>;
+ dlg,resonant-freq-hz = <180>;
+ dlg,impd-micro-ohms = <14300000>;
+ dlg,freq-track-enable;
+ dlg,bemf-sens-enable;
+ dlg,mem-array = <
+ 0x06 0x08 0x10 0x11 0x12 0x13 0x14 0x15 0x1c 0x2a
+ 0x33 0x3c 0x42 0x4b 0x4c 0x4e 0x17 0x19 0x27 0x29
+ 0x17 0x19 0x03 0x84 0x5e 0x04 0x08 0x84 0x5d 0x01
+ 0x84 0x5e 0x02 0x00 0xa4 0x5d 0x03 0x84 0x5e 0x06
+ 0x08 0x84 0x5d 0x05 0x84 0x5d 0x06 0x84 0x5e 0x08
+ 0x84 0x5e 0x05 0x8c 0x5e 0x24 0x84 0x5f 0x10 0x84
+ 0x5e 0x05 0x84 0x5e 0x08 0x84 0x5f 0x01 0x8c 0x5e
+ 0x04 0x84 0x5e 0x08 0x84 0x5f 0x11 0x19 0x88 0x00
+ 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+ 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+ >;
+ };
+
+ /* SMB1381 @ 0x44 */
+ /* MAX34417 @ 0x1c */
+};
+
+&i2c4 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* SMB1355 @ 0x0c */
+ /* SMB1390 @ 0x10 */
+};
+
+&i2c17 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ bq27742@55 {
+ compatible = "ti,bq27742";
+ reg = <0x55>;
+ };
+};
+
+&i2c19 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* MAX34417 @ 0x12 */
+ /* MAX34417 @ 0x1a */
+ /* MAX34417 @ 0x1e */
+};
+
+&pon {
+ pwrkey {
+ status = "okay";
+ };
+
+ resin {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&qupv3_id_2 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ status = "okay";
+ firmware-name = "qcom/sm8150/microsoft/adsp.mdt";
+};
+
+&remoteproc_cdsp {
+ status = "okay";
+ firmware-name = "qcom/sm8150/microsoft/cdsp.mdt";
+};
+
+&remoteproc_mpss {
+ status = "okay";
+ firmware-name = "qcom/sm8150/microsoft/modem.mdt";
+};
+
+&remoteproc_slpi {
+ status = "okay";
+ firmware-name = "qcom/sm8150/microsoft/slpi.mdt";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <126 4>;
+
+ da7280_intr_default: da7280-intr-default {
+ pins = "gpio42";
+ function = "gpio";
+ bias-pull-up;
+ input-enable;
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ status = "okay";
+
+ reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l10a_2p5>;
+ vcc-max-microamp = <750000>;
+ vccq-supply = <&vreg_l9a_1p2>;
+ vccq-max-microamp = <700000>;
+ vccq2-supply = <&vreg_s4a_1p8>;
+ vccq2-max-microamp = <750000>;
+};
+
+&ufs_mem_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vdda_ufs_2ln_core_1>;
+ vdda-max-microamp = <90200>;
+ vdda-pll-supply = <&vreg_l3c_1p2>;
+ vdda-pll-max-microamp = <19000>;
+};
+
+&usb_1_hsphy {
+ status = "okay";
+ vdda-pll-supply = <&vdd_usb_hs_core>;
+ vdda33-supply = <&vdda_usb_hs_3p1>;
+ vdda18-supply = <&vdda_usb_hs_1p8>;
+};
+
+&usb_1_qmpphy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l3c_1p2>;
+ vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&wifi {
+ status = "okay";
+
+ vdd-0.8-cx-mx-supply = <&vdda_wcss_pll>;
+ vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+ vdd-1.3-rfa-supply = <&vdda_wcss_adcdac_1>;
+ vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 51235a9521c2..142cf786c6cf 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -4,6 +4,7 @@
* Copyright (c) 2019, Linaro Limited
*/
+#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/qcom-aoss-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
@@ -577,6 +578,29 @@
<&sleep_clk>;
};
+ gpi_dma0: dma-controller@800000 {
+ compatible = "qcom,sm8150-gpi-dma";
+ reg = <0 0x800000 0 0x60000>;
+ interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <13>;
+ dma-channel-mask = <0xfa>;
+ iommus = <&apps_smmu 0x00d6 0x0>;
+ #dma-cells = <3>;
+ status = "disabled";
+ };
+
qupv3_id_0: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x008c0000 0x0 0x6000>;
@@ -695,6 +719,29 @@
};
+ gpi_dma1: dma-controller@a00000 {
+ compatible = "qcom,sm8150-gpi-dma";
+ reg = <0 0xa00000 0 0x60000>;
+ interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <13>;
+ dma-channel-mask = <0xfa>;
+ iommus = <&apps_smmu 0x0616 0x0>;
+ #dma-cells = <3>;
+ status = "disabled";
+ };
+
qupv3_id_1: geniqup@ac0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x00ac0000 0x0 0x6000>;
@@ -795,6 +842,29 @@
};
};
+ gpi_dma2: dma-controller@c00000 {
+ compatible = "qcom,sm8150-gpi-dma";
+ reg = <0 0xc00000 0 0x60000>;
+ interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <13>;
+ dma-channel-mask = <0xfa>;
+ iommus = <&apps_smmu 0x07b6 0x0>;
+ #dma-cells = <3>;
+ status = "disabled";
+ };
+
qupv3_id_2: geniqup@cc0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x00cc0000 0x0 0x6000>;
@@ -2268,7 +2338,7 @@
resets = <&gcc GCC_USB30_PRIM_BCR>;
- usb_1_dwc3: dwc3@a600000 {
+ usb_1_dwc3: usb@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 4c0de12aaba6..75f9476109e6 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2370,7 +2370,7 @@
};
mdss: mdss@ae00000 {
- compatible = "qcom,sdm845-mdss";
+ compatible = "qcom,sm8250-mdss";
reg = <0 0x0ae00000 0 0x1000>;
reg-names = "mdss";
@@ -2402,7 +2402,7 @@
ranges;
mdss_mdp: mdp@ae01000 {
- compatible = "qcom,sdm845-dpu";
+ compatible = "qcom,sm8250-dpu";
reg = <0 0x0ae01000 0 0x8f000>,
<0 0x0aeb0000 0 0x2008>;
reg-names = "mdp", "vbif";
diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
index 6ca638b4e321..93740444dd1e 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
@@ -364,3 +364,9 @@
vdda-phy-supply = <&vreg_l6b_1p2>;
vdda-pll-supply = <&vreg_l5b_0p88>;
};
+
+&ipa {
+ status = "okay";
+
+ memory-region = <&pil_ipa_fw_mem>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index ed0b51bc03ea..0d16392bb976 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -6,11 +6,13 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-sm8350.h>
#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interconnect/qcom,sm8350.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/power/qcom-aoss-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/interconnect/qcom,sm8350.h>
/ {
interrupt-parent = <&intc>;
@@ -391,6 +393,17 @@
interrupt-controller;
#interrupt-cells = <2>;
};
+
+ ipa_smp2p_out: ipa-ap-to-modem {
+ qcom,entry-name = "ipa";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ ipa_smp2p_in: ipa-modem-to-ap {
+ qcom,entry-name = "ipa";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
smp2p-slpi {
@@ -629,6 +642,45 @@
qcom,bcm-voters = <&apps_bcm_voter>;
};
+ ipa: ipa@1e40000 {
+ compatible = "qcom,sm8350-ipa";
+
+ iommus = <&apps_smmu 0x5c0 0x0>,
+ <&apps_smmu 0x5c2 0x0>;
+ reg = <0 0x1e40000 0 0x8000>,
+ <0 0x1e50000 0 0x4b20>,
+ <0 0x1e04000 0 0x23000>;
+ reg-names = "ipa-reg",
+ "ipa-shared",
+ "gsi";
+
+ interrupts-extended = <&intc GIC_SPI 655 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+ <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "ipa",
+ "gsi",
+ "ipa-clock-query",
+ "ipa-setup-ready";
+
+ clocks = <&rpmhcc RPMH_IPA_CLK>;
+ clock-names = "core";
+
+ interconnects = <&aggre2_noc MASTER_IPA &gem_noc SLAVE_LLCC>,
+ <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>;
+ interconnect-names = "ipa_to_llcc",
+ "llcc_to_ebi1",
+ "appss_to_ipa";
+
+ qcom,smem-states = <&ipa_smp2p_out 0>,
+ <&ipa_smp2p_out 1>;
+ qcom,smem-state-names = "ipa-clock-enabled-valid",
+ "ipa-clock-enabled";
+
+ status = "disabled";
+ };
+
tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex";
reg = <0x0 0x01f40000 0x0 0x40000>;
@@ -656,7 +708,7 @@
<&rpmhpd 12>;
power-domain-names = "load_state", "cx", "mss";
- interconnects = <&mc_virt 0 &mc_virt 1>;
+ interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>;
memory-region = <&pil_modem_mem>;
@@ -689,7 +741,7 @@
interrupt-controller;
};
- tsens0: thermal-sensor@c222000 {
+ tsens0: thermal-sensor@c263000 {
compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
reg = <0 0x0c263000 0 0x1ff>, /* TM */
<0 0x0c222000 0 0x8>; /* SROT */
@@ -700,7 +752,7 @@
#thermal-sensor-cells = <1>;
};
- tsens1: thermal-sensor@c223000 {
+ tsens1: thermal-sensor@c265000 {
compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
reg = <0 0x0c265000 0 0x1ff>, /* TM */
<0 0x0c223000 0 0x8>; /* SROT */
@@ -1063,7 +1115,7 @@
<&rpmhpd 10>;
power-domain-names = "load_state", "cx", "mxc";
- interconnects = <&compute_noc 1 &mc_virt 1>;
+ interconnects = <&compute_noc MASTER_CDSP_PROC &mc_virt SLAVE_EBI1>;
memory-region = <&pil_cdsp_mem>;
@@ -1176,7 +1228,7 @@
};
};
- dc_noc: interconnect@90e0000 {
+ dc_noc: interconnect@90c0000 {
compatible = "qcom,sm8350-dc-noc";
reg = <0 0x090c0000 0 0x4200>;
#interconnect-cells = <1>;
@@ -1317,7 +1369,7 @@
};
};
- thermal-zones {
+ thermal_zones: thermal-zones {
cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
diff --git a/include/dt-bindings/mailbox/qcom-ipcc.h b/include/dt-bindings/mailbox/qcom-ipcc.h
index 4c23eefed5f3..eb91a6c05b71 100644
--- a/include/dt-bindings/mailbox/qcom-ipcc.h
+++ b/include/dt-bindings/mailbox/qcom-ipcc.h
@@ -29,5 +29,6 @@
#define IPCC_CLIENT_PCIE1 14
#define IPCC_CLIENT_PCIE2 15
#define IPCC_CLIENT_SPSS 16
+#define IPCC_CLIENT_WPSS 24
#endif