leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

net: fec: add post PHY reset delay DT property

Browse Source 
Some PHY require to wait for a bit after the reset GPIO has been
toggled. This adds support for the DT property `phy-reset-post-delay`
which gives the delay in milliseconds to wait after reset.

If the DT property is not given, no delay is observed. Post reset delay
greater than 1000ms are invalid.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Quentin Schulz 2017-05-23 11:48:08 +02:00 committed by David S. Miller
parent 11d3c949b4
commit 159a07604a
2 changed files with 19 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Documentation/devicetree/bindings/net/fsl-fec.txt
View File

@ -15,6 +15,10 @@ Optional properties:
- phy-reset-active-high : If present then the reset sequence using the GPIO
specified in the "phy-reset-gpios" property is reversed (H=reset state,
L=operation state).
- phy-reset-post-delay : Post reset delay in milliseconds. If present then
a delay of phy-reset-post-delay milliseconds will be observed after the
phy-reset-gpios has been toggled. Can be omitted thus no delay is
observed. Delay is in range of 1ms to 1000ms. Other delays are invalid.
- phy-supply : regulator that powers the Ethernet PHY.
- phy-handle : phandle to the PHY device connected to this device.
- fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.

16
drivers/net/ethernet/freescale/fec_main.c
View File

@ -3192,7 +3192,7 @@ static int fec_reset_phy(struct platform_device *pdev)
{
int err, phy_reset;
bool active_high = false;
int msec = 1;
int msec = 1, phy_post_delay = 0;
struct device_node *np = pdev->dev.of_node;
if (!np)
@ -3209,6 +3209,11 @@ static int fec_reset_phy(struct platform_device *pdev)
else if (!gpio_is_valid(phy_reset))
return 0;
err = of_property_read_u32(np, "phy-reset-post-delay", &phy_post_delay);
/* valid reset duration should be less than 1s */
if (!err && phy_post_delay > 1000)
return -EINVAL;
active_high = of_property_read_bool(np, "phy-reset-active-high");
err = devm_gpio_request_one(&pdev->dev, phy_reset,
@ -3226,6 +3231,15 @@ static int fec_reset_phy(struct platform_device *pdev)
gpio_set_value_cansleep(phy_reset, !active_high);
if (!phy_post_delay)
return 0;
if (phy_post_delay > 20)
msleep(phy_post_delay);
else
usleep_range(phy_post_delay * 1000,
phy_post_delay * 1000 + 1000);
return 0;
}
#else /* CONFIG_OF */