forked from Minki/linux
arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board
This patch adds the Device Tree source for Exynos5433-based Samsung TM2 board. This patch adds support for following devices: 1. basic SoC - Initial booting for Samsung Exynos5433 SoC - DRAM LPDDR3 (3GB) - eMMC (32GB) - ARM architecture timer 2. power management devices - Sasmung S2MPS13 PMIC for the power supply - CPUFREQ for big.LITTLE cores - TMU for big.LITTLE cores and GPU - ADC with thermistor to measure the temperature of AP/Battery/Charger - Maxim MAX77843 Interface PMIC (MUIC/Haptic/Regulator) 3. sound devices - I2S for sound bus - LPASS for sound power control - Wolfson WM5110 for sound codec - Maxim MAX98504 for speaker amplifier - TM2 ASoC Machine device driver node 3. display devices - DECON, DSI and MIC for the panel output 4. USB devices - USB 3.0 DRD (Dual Role Device) - USB 3.0 Host controller 5. storage devices - MSHC (Mobile Storage Host Controller) for eMMC device 6. misc devices - gpio-keys (power, volume up/down, home key) - PWM (Pulse Width Modulation Timer) Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by: Inha Song <ideal.song@samsung.com> Signed-off-by: Ingi kim <ingi2.kim@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This commit is contained in:
Chanwoo Choi
Krzysztof Kozlowski
parent
5f04c4cfcc
commit
01e5d23521
@ -15,6 +15,7 @@ Required root node properties:
|
||||
- "samsung,xyref5260" - for Exynos5260-based Samsung board.
|
||||
- "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board.
|
||||
- "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board.
|
||||
- "samsung,tm2" - for Exynos5433-based Samsung TM2 board.
|
||||
- "samsung,sd5v1" - for Exynos5440-based Samsung board.
|
||||
- "samsung,ssdk5440" - for Exynos5440-based Samsung board.
|
||||
|
||||
|
||||
@ -1,4 +1,6 @@
|
||||
dtb-$(CONFIG_ARCH_EXYNOS) += exynos7-espresso.dtb
|
||||
dtb-$(CONFIG_ARCH_EXYNOS) += \
|
||||
exynos5433-tm2.dtb \
|
||||
exynos7-espresso.dtb
|
||||
|
||||
always := $(dtb-y)
|
||||
subdir-y := $(dts-dirs)
|
||||
|
||||
974
arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
Normal file
974
arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
Normal file
@ -0,0 +1,974 @@
|
||||
/*
|
||||
* SAMSUNG Exynos5433 TM2 board device tree source
|
||||
*
|
||||
* Copyright (c) 2016 Samsung Electronics Co., Ltd.
|
||||
*
|
||||
* Device tree source file for Samsung's TM2 board which is based on
|
||||
* Samsung Exynos5433 SoC.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "exynos5433.dtsi"
|
||||
#include <dt-bindings/clock/samsung,s2mps11.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
/ {
|
||||
model = "Samsung TM2 board";
|
||||
compatible = "samsung,tm2", "samsung,exynos5433";
|
||||
|
||||
aliases {
|
||||
pinctrl0 = &pinctrl_alive;
|
||||
pinctrl1 = &pinctrl_aud;
|
||||
pinctrl2 = &pinctrl_cpif;
|
||||
pinctrl3 = &pinctrl_ese;
|
||||
pinctrl4 = &pinctrl_finger;
|
||||
pinctrl5 = &pinctrl_fsys;
|
||||
pinctrl6 = &pinctrl_imem;
|
||||
pinctrl7 = &pinctrl_nfc;
|
||||
pinctrl8 = &pinctrl_peric;
|
||||
pinctrl9 = &pinctrl_touch;
|
||||
serial0 = &serial_0;
|
||||
serial1 = &serial_1;
|
||||
serial2 = &serial_2;
|
||||
serial3 = &serial_3;
|
||||
spi0 = &spi_0;
|
||||
spi1 = &spi_1;
|
||||
spi2 = &spi_2;
|
||||
spi3 = &spi_3;
|
||||
spi4 = &spi_4;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = &serial_1;
|
||||
};
|
||||
|
||||
memory@20000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x20000000 0x0 0xc0000000>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
power-key {
|
||||
gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_POWER>;
|
||||
label = "power key";
|
||||
debounce-interval = <10>;
|
||||
};
|
||||
|
||||
volume-up-key {
|
||||
gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
label = "volume-up key";
|
||||
debounce-interval = <10>;
|
||||
};
|
||||
|
||||
volume-down-key {
|
||||
gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
label = "volume-down key";
|
||||
debounce-interval = <10>;
|
||||
};
|
||||
|
||||
homepage-key {
|
||||
gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_MENU>;
|
||||
label = "homepage key";
|
||||
debounce-interval = <10>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c_max98504: i2c-gpio-0 {
|
||||
compatible = "i2c-gpio";
|
||||
gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
|
||||
&gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
|
||||
i2c-gpio,delay-us = <2>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
max98504: max98504@31 {
|
||||
compatible = "maxim,max98504";
|
||||
reg = <0x31>;
|
||||
maxim,rx-path = <1>;
|
||||
maxim,tx-path = <1>;
|
||||
maxim,tx-channel-mask = <3>;
|
||||
maxim,tx-channel-source = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "samsung,tm2-audio";
|
||||
audio-codec = <&wm5110>;
|
||||
i2s-controller = <&i2s0>;
|
||||
audio-amplifier = <&max98504>;
|
||||
mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
|
||||
model = "wm5110";
|
||||
samsung,audio-routing =
|
||||
/* Headphone */
|
||||
"HP", "HPOUT1L",
|
||||
"HP", "HPOUT1R",
|
||||
|
||||
/* Speaker */
|
||||
"SPK", "SPKOUT",
|
||||
"SPKOUT", "HPOUT2L",
|
||||
"SPKOUT", "HPOUT2R",
|
||||
|
||||
/* Receiver */
|
||||
"RCV", "HPOUT3L",
|
||||
"RCV", "HPOUT3R";
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&adc {
|
||||
vdd-supply = <&ldo3_reg>;
|
||||
status = "okay";
|
||||
|
||||
thermistor-ap {
|
||||
compatible = "murata,ncp03wf104";
|
||||
pullup-uv = <1800000>;
|
||||
pullup-ohm = <100000>;
|
||||
pulldown-ohm = <0>;
|
||||
io-channels = <&adc 0>;
|
||||
};
|
||||
|
||||
thermistor-battery {
|
||||
compatible = "murata,ncp03wf104";
|
||||
pullup-uv = <1800000>;
|
||||
pullup-ohm = <100000>;
|
||||
pulldown-ohm = <0>;
|
||||
io-channels = <&adc 1>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
|
||||
thermistor-charger {
|
||||
compatible = "murata,ncp03wf104";
|
||||
pullup-uv = <1800000>;
|
||||
pullup-ohm = <100000>;
|
||||
pulldown-ohm = <0>;
|
||||
io-channels = <&adc 2>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&buck3_reg>;
|
||||
};
|
||||
|
||||
&cpu4 {
|
||||
cpu-supply = <&buck2_reg>;
|
||||
};
|
||||
|
||||
&decon {
|
||||
status = "okay";
|
||||
|
||||
i80-if-timings {
|
||||
};
|
||||
};
|
||||
|
||||
&dsi {
|
||||
status = "okay";
|
||||
vddcore-supply = <&ldo6_reg>;
|
||||
vddio-supply = <&ldo7_reg>;
|
||||
samsung,pll-clock-frequency = <24000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&te_irq>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
dsi_out: endpoint {
|
||||
samsung,burst-clock-frequency = <512000000>;
|
||||
samsung,esc-clock-frequency = <16000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&hsi2c_0 {
|
||||
status = "okay";
|
||||
clock-frequency = <2500000>;
|
||||
|
||||
s2mps13-pmic@66 {
|
||||
compatible = "samsung,s2mps13-pmic";
|
||||
interrupt-parent = <&gpa0>;
|
||||
interrupts = <7 IRQ_TYPE_NONE>;
|
||||
reg = <0x66>;
|
||||
samsung,s2mps11-wrstbi-ground;
|
||||
|
||||
s2mps13_osc: clocks {
|
||||
compatible = "samsung,s2mps13-clk";
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "s2mps13_ap", "s2mps13_cp",
|
||||
"s2mps13_bt";
|
||||
};
|
||||
|
||||
regulators {
|
||||
ldo1_reg: LDO1 {
|
||||
regulator-name = "VDD_ALIVE_0.9V_AP";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo2_reg: LDO2 {
|
||||
regulator-name = "VDDQ_MMC2_2.8V_AP";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
ldo3_reg: LDO3 {
|
||||
regulator-name = "VDD1_E_1.8V_AP";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo4_reg: LDO4 {
|
||||
regulator-name = "VDD10_MIF_PLL_1.0V_AP";
|
||||
regulator-min-microvolt = <1300000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
ldo5_reg: LDO5 {
|
||||
regulator-name = "VDD10_DPLL_1.0V_AP";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
ldo6_reg: LDO6 {
|
||||
regulator-name = "VDD10_MIPI2L_1.0V_AP";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
ldo7_reg: LDO7 {
|
||||
regulator-name = "VDD18_MIPI2L_1.8V_AP";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo8_reg: LDO8 {
|
||||
regulator-name = "VDD18_LLI_1.8V_AP";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
ldo9_reg: LDO9 {
|
||||
regulator-name = "VDD18_ABB_ETC_1.8V_AP";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
ldo10_reg: LDO10 {
|
||||
regulator-name = "VDD33_USB30_3.0V_AP";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
ldo11_reg: LDO11 {
|
||||
regulator-name = "VDD_INT_M_1.0V_AP";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
ldo12_reg: LDO12 {
|
||||
regulator-name = "VDD_KFC_M_1.1V_AP";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo13_reg: LDO13 {
|
||||
regulator-name = "VDD_G3D_M_0.95V_AP";
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
ldo14_reg: LDO14 {
|
||||
regulator-name = "VDDQ_M1_LDO_1.2V_AP";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
ldo15_reg: LDO15 {
|
||||
regulator-name = "VDDQ_M2_LDO_1.2V_AP";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
ldo16_reg: LDO16 {
|
||||
regulator-name = "VDDQ_EFUSE";
|
||||
regulator-min-microvolt = <1400000>;
|
||||
regulator-max-microvolt = <3400000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo17_reg: LDO17 {
|
||||
regulator-name = "V_TFLASH_2.8V_AP";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
ldo18_reg: LDO18 {
|
||||
regulator-name = "V_CODEC_1.8V_AP";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo19_reg: LDO19 {
|
||||
regulator-name = "VDDA_1.8V_COMP";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo20_reg: LDO20 {
|
||||
regulator-name = "VCC_2.8V_AP";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo21_reg: LDO21 {
|
||||
regulator-name = "VT_CAM_1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo22_reg: LDO22 {
|
||||
regulator-name = "CAM_IO_1.8V_AP";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo23_reg: LDO23 {
|
||||
regulator-name = "CAM_SEN_CORE_1.2V_AP";
|
||||
regulator-min-microvolt = <1050000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
ldo24_reg: LDO24 {
|
||||
regulator-name = "VT_CAM_1.2V";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
ldo25_reg: LDO25 {
|
||||
regulator-name = "CAM_SEN_A2.8V_AP";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
ldo26_reg: LDO26 {
|
||||
regulator-name = "CAM_AF_2.8V_AP";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
ldo27_reg: LDO27 {
|
||||
regulator-name = "VCC_3.0V_LCD_AP";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
};
|
||||
|
||||
ldo28_reg: LDO28 {
|
||||
regulator-name = "VCC_1.8V_LCD_AP";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo29_reg: LDO29 {
|
||||
regulator-name = "VT_CAM_2.8V";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
};
|
||||
|
||||
ldo30_reg: LDO30 {
|
||||
regulator-name = "TSP_AVDD_3.3V_AP";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
ldo31_reg: LDO31 {
|
||||
regulator-name = "TSP_VDD_1.85V_AP";
|
||||
regulator-min-microvolt = <1850000>;
|
||||
regulator-max-microvolt = <1850000>;
|
||||
};
|
||||
|
||||
ldo32_reg: LDO32 {
|
||||
regulator-name = "VTOUCH_1.8V_AP";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo33_reg: LDO33 {
|
||||
regulator-name = "VTOUCH_LED_3.3V";
|
||||
regulator-min-microvolt = <2500000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
};
|
||||
|
||||
ldo34_reg: LDO34 {
|
||||
regulator-name = "VCC_1.8V_MHL_AP";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <2100000>;
|
||||
};
|
||||
|
||||
ldo35_reg: LDO35 {
|
||||
regulator-name = "OIS_VM_2.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
ldo36_reg: LDO36 {
|
||||
regulator-name = "VSIL_1.0V";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
};
|
||||
|
||||
ldo37_reg: LDO37 {
|
||||
regulator-name = "VF_1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo38_reg: LDO38 {
|
||||
regulator-name = "VCC_3.0V_MOTOR_AP";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
};
|
||||
|
||||
ldo39_reg: LDO39 {
|
||||
regulator-name = "V_HRM_1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo40_reg: LDO40 {
|
||||
regulator-name = "V_HRM_3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
buck1_reg: BUCK1 {
|
||||
regulator-name = "VDD_MIF_0.9V_AP";
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
buck2_reg: BUCK2 {
|
||||
regulator-name = "VDD_EGL_1.0V_AP";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
buck3_reg: BUCK3 {
|
||||
regulator-name = "VDD_KFC_1.0V_AP";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
buck4_reg: BUCK4 {
|
||||
regulator-name = "VDD_INT_0.95V_AP";
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
buck5_reg: BUCK5 {
|
||||
regulator-name = "VDD_DISP_CAM0_0.9V_AP";
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
buck6_reg: BUCK6 {
|
||||
regulator-name = "VDD_G3D_0.9V_AP";
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
buck7_reg: BUCK7 {
|
||||
regulator-name = "VDD_MEM1_1.2V_AP";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck8_reg: BUCK8 {
|
||||
regulator-name = "VDD_LLDO_1.35V_AP";
|
||||
regulator-min-microvolt = <1350000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck9_reg: BUCK9 {
|
||||
regulator-name = "VDD_MLDO_2.0V_AP";
|
||||
regulator-min-microvolt = <1350000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck10_reg: BUCK10 {
|
||||
regulator-name = "vdd_mem2";
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&hsi2c_8 {
|
||||
status = "okay";
|
||||
|
||||
max77843@66 {
|
||||
compatible = "maxim,max77843";
|
||||
interrupt-parent = <&gpa1>;
|
||||
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
|
||||
reg = <0x66>;
|
||||
|
||||
muic: max77843-muic {
|
||||
compatible = "maxim,max77843-muic";
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "maxim,max77843-regulator";
|
||||
safeout1_reg: SAFEOUT1 {
|
||||
regulator-name = "SAFEOUT1";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <4950000>;
|
||||
};
|
||||
|
||||
safeout2_reg: SAFEOUT2 {
|
||||
regulator-name = "SAFEOUT2";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <4950000>;
|
||||
};
|
||||
|
||||
charger_reg: CHARGER {
|
||||
regulator-name = "CHARGER";
|
||||
regulator-min-microamp = <100000>;
|
||||
regulator-max-microamp = <3150000>;
|
||||
};
|
||||
};
|
||||
|
||||
haptic: max77843-haptic {
|
||||
compatible = "maxim,max77843-haptic";
|
||||
haptic-supply = <&ldo38_reg>;
|
||||
pwms = <&pwm 0 33670 0>;
|
||||
pwm-names = "haptic";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mshc_0 {
|
||||
status = "okay";
|
||||
num-slots = <1>;
|
||||
non-removable;
|
||||
card-detect-delay = <200>;
|
||||
samsung,dw-mshc-ciu-div = <3>;
|
||||
samsung,dw-mshc-sdr-timing = <0 4>;
|
||||
samsung,dw-mshc-ddr-timing = <0 2>;
|
||||
samsung,dw-mshc-hs400-timing = <0 3>;
|
||||
samsung,read-strobe-delay = <90>;
|
||||
fifo-depth = <0x80>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
|
||||
&sd0_bus8 &sd0_rdqs>;
|
||||
bus-width = <8>;
|
||||
assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
|
||||
assigned-clock-rates = <800000000>;
|
||||
};
|
||||
|
||||
&pinctrl_alive {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&initial_alive>;
|
||||
|
||||
initial_alive: initial-state {
|
||||
PIN(IN, gpa0-0, DOWN, LV1);
|
||||
PIN(IN, gpa0-1, NONE, LV1);
|
||||
PIN(IN, gpa0-2, DOWN, LV1);
|
||||
PIN(IN, gpa0-3, NONE, LV1);
|
||||
PIN(IN, gpa0-4, NONE, LV1);
|
||||
PIN(IN, gpa0-5, DOWN, LV1);
|
||||
PIN(IN, gpa0-6, NONE, LV1);
|
||||
PIN(IN, gpa0-7, NONE, LV1);
|
||||
|
||||
PIN(IN, gpa1-0, UP, LV1);
|
||||
PIN(IN, gpa1-1, NONE, LV1);
|
||||
PIN(IN, gpa1-2, NONE, LV1);
|
||||
PIN(IN, gpa1-3, DOWN, LV1);
|
||||
PIN(IN, gpa1-4, DOWN, LV1);
|
||||
PIN(IN, gpa1-5, NONE, LV1);
|
||||
PIN(IN, gpa1-6, NONE, LV1);
|
||||
PIN(IN, gpa1-7, NONE, LV1);
|
||||
|
||||
PIN(IN, gpa2-0, NONE, LV1);
|
||||
PIN(IN, gpa2-1, NONE, LV1);
|
||||
PIN(IN, gpa2-2, NONE, LV1);
|
||||
PIN(IN, gpa2-3, DOWN, LV1);
|
||||
PIN(IN, gpa2-4, NONE, LV1);
|
||||
PIN(IN, gpa2-5, DOWN, LV1);
|
||||
PIN(IN, gpa2-6, DOWN, LV1);
|
||||
PIN(IN, gpa2-7, NONE, LV1);
|
||||
|
||||
PIN(IN, gpa3-0, DOWN, LV1);
|
||||
PIN(IN, gpa3-1, DOWN, LV1);
|
||||
PIN(IN, gpa3-2, NONE, LV1);
|
||||
PIN(IN, gpa3-3, DOWN, LV1);
|
||||
PIN(IN, gpa3-4, NONE, LV1);
|
||||
PIN(IN, gpa3-5, DOWN, LV1);
|
||||
PIN(IN, gpa3-6, DOWN, LV1);
|
||||
PIN(IN, gpa3-7, DOWN, LV1);
|
||||
|
||||
PIN(IN, gpf1-0, NONE, LV1);
|
||||
PIN(IN, gpf1-1, NONE, LV1);
|
||||
PIN(IN, gpf1-2, DOWN, LV1);
|
||||
PIN(IN, gpf1-4, UP, LV1);
|
||||
PIN(OUT, gpf1-5, NONE, LV1);
|
||||
PIN(IN, gpf1-6, DOWN, LV1);
|
||||
PIN(IN, gpf1-7, DOWN, LV1);
|
||||
|
||||
PIN(IN, gpf2-0, DOWN, LV1);
|
||||
PIN(IN, gpf2-1, DOWN, LV1);
|
||||
PIN(IN, gpf2-2, DOWN, LV1);
|
||||
PIN(IN, gpf2-3, DOWN, LV1);
|
||||
|
||||
PIN(IN, gpf3-0, DOWN, LV1);
|
||||
PIN(IN, gpf3-1, DOWN, LV1);
|
||||
PIN(IN, gpf3-2, NONE, LV1);
|
||||
PIN(IN, gpf3-3, DOWN, LV1);
|
||||
|
||||
PIN(IN, gpf4-0, DOWN, LV1);
|
||||
PIN(IN, gpf4-1, DOWN, LV1);
|
||||
PIN(IN, gpf4-2, DOWN, LV1);
|
||||
PIN(IN, gpf4-3, DOWN, LV1);
|
||||
PIN(IN, gpf4-4, DOWN, LV1);
|
||||
PIN(IN, gpf4-5, DOWN, LV1);
|
||||
PIN(IN, gpf4-6, DOWN, LV1);
|
||||
PIN(IN, gpf4-7, DOWN, LV1);
|
||||
|
||||
PIN(IN, gpf5-0, DOWN, LV1);
|
||||
PIN(IN, gpf5-1, DOWN, LV1);
|
||||
PIN(IN, gpf5-2, DOWN, LV1);
|
||||
PIN(IN, gpf5-3, DOWN, LV1);
|
||||
PIN(OUT, gpf5-4, NONE, LV1);
|
||||
PIN(IN, gpf5-5, DOWN, LV1);
|
||||
PIN(IN, gpf5-6, DOWN, LV1);
|
||||
PIN(IN, gpf5-7, DOWN, LV1);
|
||||
};
|
||||
|
||||
te_irq: te_irq {
|
||||
samsung,pins = "gpf1-3";
|
||||
samsung,pin-function = <0xf>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl_cpif {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&initial_cpif>;
|
||||
|
||||
initial_cpif: initial-state {
|
||||
PIN(IN, gpv6-0, DOWN, LV1);
|
||||
PIN(IN, gpv6-1, DOWN, LV1);
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl_ese {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&initial_ese>;
|
||||
|
||||
initial_ese: initial-state {
|
||||
PIN(IN, gpj2-0, DOWN, LV1);
|
||||
PIN(IN, gpj2-1, DOWN, LV1);
|
||||
PIN(IN, gpj2-2, DOWN, LV1);
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl_fsys {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&initial_fsys>;
|
||||
|
||||
initial_fsys: initial-state {
|
||||
PIN(IN, gpr3-0, NONE, LV1);
|
||||
PIN(IN, gpr3-1, DOWN, LV1);
|
||||
PIN(IN, gpr3-2, DOWN, LV1);
|
||||
PIN(IN, gpr3-3, DOWN, LV1);
|
||||
PIN(IN, gpr3-7, NONE, LV1);
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl_imem {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&initial_imem>;
|
||||
|
||||
initial_imem: initial-state {
|
||||
PIN(IN, gpf0-0, UP, LV1);
|
||||
PIN(IN, gpf0-1, UP, LV1);
|
||||
PIN(IN, gpf0-2, DOWN, LV1);
|
||||
PIN(IN, gpf0-3, UP, LV1);
|
||||
PIN(IN, gpf0-4, DOWN, LV1);
|
||||
PIN(IN, gpf0-5, NONE, LV1);
|
||||
PIN(IN, gpf0-6, DOWN, LV1);
|
||||
PIN(IN, gpf0-7, UP, LV1);
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl_nfc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&initial_nfc>;
|
||||
|
||||
initial_nfc: initial-state {
|
||||
PIN(IN, gpj0-2, DOWN, LV1);
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl_peric {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&initial_peric>;
|
||||
|
||||
initial_peric: initial-state {
|
||||
PIN(IN, gpv7-0, DOWN, LV1);
|
||||
PIN(IN, gpv7-1, DOWN, LV1);
|
||||
PIN(IN, gpv7-2, NONE, LV1);
|
||||
PIN(IN, gpv7-3, DOWN, LV1);
|
||||
PIN(IN, gpv7-4, DOWN, LV1);
|
||||
PIN(IN, gpv7-5, DOWN, LV1);
|
||||
|
||||
PIN(IN, gpb0-4, DOWN, LV1);
|
||||
|
||||
PIN(IN, gpc0-2, DOWN, LV1);
|
||||
PIN(IN, gpc0-5, DOWN, LV1);
|
||||
PIN(IN, gpc0-7, DOWN, LV1);
|
||||
|
||||
PIN(IN, gpc1-1, DOWN, LV1);
|
||||
|
||||
PIN(IN, gpc3-4, NONE, LV1);
|
||||
PIN(IN, gpc3-5, NONE, LV1);
|
||||
PIN(IN, gpc3-6, NONE, LV1);
|
||||
PIN(IN, gpc3-7, NONE, LV1);
|
||||
|
||||
PIN(OUT, gpg0-0, NONE, LV1);
|
||||
PIN(FUNC1, gpg0-1, DOWN, LV1);
|
||||
|
||||
PIN(IN, gpd2-5, DOWN, LV1);
|
||||
|
||||
PIN(IN, gpd4-0, NONE, LV1);
|
||||
PIN(IN, gpd4-1, DOWN, LV1);
|
||||
PIN(IN, gpd4-2, DOWN, LV1);
|
||||
PIN(IN, gpd4-3, DOWN, LV1);
|
||||
PIN(IN, gpd4-4, DOWN, LV1);
|
||||
|
||||
PIN(IN, gpd6-3, DOWN, LV1);
|
||||
|
||||
PIN(IN, gpd8-1, UP, LV1);
|
||||
|
||||
PIN(IN, gpg1-0, DOWN, LV1);
|
||||
PIN(IN, gpg1-1, DOWN, LV1);
|
||||
PIN(IN, gpg1-2, DOWN, LV1);
|
||||
PIN(IN, gpg1-3, DOWN, LV1);
|
||||
PIN(IN, gpg1-4, DOWN, LV1);
|
||||
|
||||
PIN(IN, gpg2-0, DOWN, LV1);
|
||||
PIN(IN, gpg2-1, DOWN, LV1);
|
||||
|
||||
PIN(IN, gpg3-0, DOWN, LV1);
|
||||
PIN(IN, gpg3-1, DOWN, LV1);
|
||||
PIN(IN, gpg3-5, DOWN, LV1);
|
||||
PIN(IN, gpg3-7, DOWN, LV1);
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl_touch {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&initial_touch>;
|
||||
|
||||
initial_touch: initial-state {
|
||||
PIN(IN, gpj1-2, DOWN, LV1);
|
||||
};
|
||||
};
|
||||
|
||||
&pwm {
|
||||
pinctrl-0 = <&pwm0_out>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mic {
|
||||
status = "okay";
|
||||
|
||||
i80-if-timings {
|
||||
};
|
||||
};
|
||||
|
||||
&serial_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&serial_3 {
|
||||
assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
|
||||
assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi_1 {
|
||||
cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
|
||||
wm5110: wm5110-codec@0 {
|
||||
compatible = "wlf,wm5110";
|
||||
reg = <0x0>;
|
||||
spi-max-frequency = <20000000>;
|
||||
interrupt-parent = <&gpa0>;
|
||||
interrupts = <4 IRQ_TYPE_NONE>;
|
||||
clocks = <&pmu_system_controller 0>,
|
||||
<&s2mps13_osc S2MPS11_CLK_BT>;
|
||||
clock-names = "mclk1", "mclk2";
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
wlf,micd-detect-debounce = <300>;
|
||||
wlf,micd-bias-start-time = <0x1>;
|
||||
wlf,micd-rate = <0x7>;
|
||||
wlf,micd-dbtime = <0x1>;
|
||||
wlf,micd-force-micbias;
|
||||
wlf,micd-configs = <0x0 1 0>;
|
||||
wlf,hpdet-channel = <1>;
|
||||
wlf,gpsw = <0x1>;
|
||||
wlf,inmode = <2 0 2 0>;
|
||||
|
||||
wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
|
||||
wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
/* core supplies */
|
||||
AVDD-supply = <&ldo18_reg>;
|
||||
DBVDD1-supply = <&ldo18_reg>;
|
||||
CPVDD-supply = <&ldo18_reg>;
|
||||
DBVDD2-supply = <&ldo18_reg>;
|
||||
DBVDD3-supply = <&ldo18_reg>;
|
||||
|
||||
controller-data {
|
||||
samsung,spi-feedback-delay = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&timer {
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
|
||||
&tmu_atlas0 {
|
||||
vtmu-supply = <&ldo3_reg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tmu_apollo {
|
||||
vtmu-supply = <&ldo3_reg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tmu_g3d {
|
||||
vtmu-supply = <&ldo3_reg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd30 {
|
||||
vdd33-supply = <&ldo10_reg>;
|
||||
vdd10-supply = <&ldo6_reg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_0 {
|
||||
dr_mode = "otg";
|
||||
};
|
||||
|
||||
&usbdrd30_phy {
|
||||
vbus-supply = <&safeout1_reg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&xxti {
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user