forked from Minki/linux
arm64: dts: exynos: Add dtsi files for Samsung Exynos5433 64bit SoC
This patch adds new Exynos5433 dtsi to support 64-bit Exynos5433 SoC
based on Octa-core CPUs (quad Cortex-A57 and quad Cortex-A53).
Exynos5433 supports PSCI (Power State Coordination Interface) v0.1.
This patch includes following Device Tree nodes to support Exynos5433 SoC:
1. Octa cores for big.LITTLE architecture
- Cortex-A53 LITTLE Quad-core
- Cortex-A57 big Quad-core
- Supporting PSCI v0.1
2. Clock controller nodes
- CMU_TOP : clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS
- CMU_CPIF : clocks for LLI (Low Latency Interface)
- CMU_MIF : clocks for DRAM Memory Controller
- CMU_PERIC : clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS
- CMU_PERIS : clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC
- CMU_FSYS : clocks for USB/UFS/SDMMC/TSI/PDMA
- CMU_G2D : clocks for G2D/MDMA
- CMU_DISP : clocks for DECON/HDMI/DSIM/MIXER
- CMU_AUD : clocks for Cortex-A5/BUS/AUDIO
- CMU_BUS{0|1|2} : clocks for global data buses and global peripheral buses
- CMU_G3D : clocks for 3D Graphics Engine
- CMU_GSCL : clocks for GSCALER
- CMU_APOLLO: clocks for Cortex-A53 Quad-core processor.
- CMU_ATLAS : clocks for Cortex-A57 Quad-core processor,
CoreSight and L2 cache controller.
- CMU_MSCL : clocks for M2M (Memory to Memory) scaler and JPEG IPs.
- CMU_MFC : clocks for MFC (Multi-Format Codec) IP.
- CMU_HEVC : clocks for HEVC(High Efficiency Video Codec) decoder IP.
- CMU_ISP : clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs.
- CMU_CAM0 : clocks for MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} IPs.
- CMU_CAM1 : clocks for COrtex-A5/MIPI_CSIS2/FIMC_LITE_C/FIMC-FD IPs.
3. Pinctrl nodes for GPIO
- alive/aud/cpif/ese/finger/fsys/imem/nfc/peric/touch pad
4. Timers
- ARM architecture timer (armv8-timer)
- MCT (Multi Core Timer) timer
5. Interrupt controller (GIC-400)
6. BUS devices
- HS-I2C (High-Speed I2C) device
- SPI (Serial Peripheral Interface) device
7. Sound devices
- I2S bus
- LPASS (Low Power Audio Subsystem)
8. Power management devices
- CPUFREQ for for Cortex-A53/A57
- TMU (Thermal Management Unit) for Cortex-A53/A57, G3D, ISP
9. Display controller devices
- DECON (Display and enhancement controller) for panel output
- DSI (Display Serial Interface)
- MIC (Mobile Image Compressor)
10. USB
- USB 3.0 DRD (Dual Role Device) controller
- USB 3.0 Host controller
11. Storage devices
- MSHC (Mobile Storage Host Controller)
12. Misc devices
- UART devices
- ADC (Analog Digital Converter)
- PWM (Pulse Width Modulation)
- ADMA (Advanced DMA) and PDMA (Peripheral DMA)
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Inha Song <ideal.song@samsung.com>
Signed-off-by: Ingi kim <ingi2.kim@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This commit is contained in:
Chanwoo Choi
Krzysztof Kozlowski
parent
1001354ca3
commit
5f04c4cfcc
794
arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
Normal file
794
arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
Normal file
@ -0,0 +1,794 @@
|
||||
/*
|
||||
* Samsung's Exynos5433 SoC pin-mux and pin-config device tree source
|
||||
*
|
||||
* Copyright (c) 2016 Samsung Electronics Co., Ltd.
|
||||
* Chanwoo Choi <cw00.choi@samsung.com>
|
||||
*
|
||||
* Samsung's Exynos5433 SoC pin-mux and pin-config options are listed as device
|
||||
* tree nodes are listed in this file.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#define PIN_PULL_NONE 0
|
||||
#define PIN_PULL_DOWN 1
|
||||
#define PIN_PULL_UP 3
|
||||
|
||||
#define PIN_DRV_LV1 0
|
||||
#define PIN_DRV_LV2 2
|
||||
#define PIN_DRV_LV3 1
|
||||
#define PIN_DRV_LV4 3
|
||||
|
||||
#define PIN_IN 0
|
||||
#define PIN_OUT 1
|
||||
#define PIN_FUNC1 2
|
||||
|
||||
#define PIN(_func, _pin, _pull, _drv) \
|
||||
_pin { \
|
||||
samsung,pins = #_pin; \
|
||||
samsung,pin-function = <PIN_ ##_func>; \
|
||||
samsung,pin-pud = <PIN_PULL_ ##_pull>; \
|
||||
samsung,pin-drv = <PIN_DRV_ ##_drv>; \
|
||||
}
|
||||
|
||||
&pinctrl_alive {
|
||||
gpa0: gpa0 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 0 0>, <GIC_SPI 1 0>, <GIC_SPI 2 0>,
|
||||
<GIC_SPI 3 0>, <GIC_SPI 4 0>, <GIC_SPI 5 0>,
|
||||
<GIC_SPI 6 0>, <GIC_SPI 7 0>;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpa1: gpa1 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 8 0>, <GIC_SPI 9 0>, <GIC_SPI 10 0>,
|
||||
<GIC_SPI 11 0>, <GIC_SPI 12 0>, <GIC_SPI 13 0>,
|
||||
<GIC_SPI 14 0>, <GIC_SPI 15 0>;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpa2: gpa2 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpa3: gpa3 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpf1: gpf1 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpf2: gpf2 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpf3: gpf3 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpf4: gpf4 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpf5: gpf5 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl_aud {
|
||||
gpz0: gpz0 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpz1: gpz1 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
i2s0_bus: i2s0-bus {
|
||||
samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3",
|
||||
"gpz0-4", "gpz0-5", "gpz0-6";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <1>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
pcm0_bus: pcm0-bus {
|
||||
samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3";
|
||||
samsung,pin-function = <3>;
|
||||
samsung,pin-pud = <1>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
uart_aud_bus: uart-aud-bus {
|
||||
samsung,pins = "gpz1-3", "gpz1-2", "gpz1-1", "gpz1-0";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl_cpif {
|
||||
gpv6: gpv6 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl_ese {
|
||||
gpj2: gpj2 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl_finger {
|
||||
gpd5: gpd5 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
spi2_bus: spi2-bus {
|
||||
samsung,pins = "gpd5-0", "gpd5-2", "gpd5-3";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
hs_i2c6_bus: hs-i2c6-bus {
|
||||
samsung,pins = "gpd5-3", "gpd5-2";
|
||||
samsung,pin-function = <4>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl_fsys {
|
||||
gph1: gph1 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpr4: gpr4 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpr0: gpr0 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpr1: gpr1 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpr2: gpr2 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpr3: gpr3 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
sd0_clk: sd0-clk {
|
||||
samsung,pins = "gpr0-0";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
sd0_cmd: sd0-cmd {
|
||||
samsung,pins = "gpr0-1";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
sd0_rdqs: sd0-rdqs {
|
||||
samsung,pins = "gpr0-2";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <1>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
sd0_qrdy: sd0-qrdy {
|
||||
samsung,pins = "gpr0-3";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <1>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
sd0_bus1: sd0-bus-width1 {
|
||||
samsung,pins = "gpr1-0";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
sd0_bus4: sd0-bus-width4 {
|
||||
samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
sd0_bus8: sd0-bus-width8 {
|
||||
samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
sd1_clk: sd1-clk {
|
||||
samsung,pins = "gpr2-0";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
sd1_cmd: sd1-cmd {
|
||||
samsung,pins = "gpr2-1";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
sd1_bus1: sd1-bus-width1 {
|
||||
samsung,pins = "gpr3-0";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
sd1_bus4: sd1-bus-width4 {
|
||||
samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
sd1_bus8: sd1-bus-width8 {
|
||||
samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
pcie_bus: pcie_bus {
|
||||
samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
|
||||
samsung,pin-function = <3>;
|
||||
samsung,pin-pud = <3>;
|
||||
};
|
||||
|
||||
sd2_clk: sd2-clk {
|
||||
samsung,pins = "gpr4-0";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
sd2_cmd: sd2-cmd {
|
||||
samsung,pins = "gpr4-1";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
sd2_cd: sd2-cd {
|
||||
samsung,pins = "gpr4-2";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
sd2_bus1: sd2-bus-width1 {
|
||||
samsung,pins = "gpr4-3";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
sd2_bus4: sd2-bus-width4 {
|
||||
samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
sd2_clk_output: sd2-clk-output {
|
||||
samsung,pins = "gpr4-0";
|
||||
samsung,pin-function = <1>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <2>;
|
||||
};
|
||||
|
||||
sd2_cmd_output: sd2-cmd-output {
|
||||
samsung,pins = "gpr4-1";
|
||||
samsung,pin-function = <1>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl_imem {
|
||||
gpf0: gpf0 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl_nfc {
|
||||
gpj0: gpj0 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
hs_i2c4_bus: hs-i2c4-bus {
|
||||
samsung,pins = "gpj0-1", "gpj0-0";
|
||||
samsung,pin-function = <4>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl_peric {
|
||||
gpv7: gpv7 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpb0: gpb0 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpc0: gpc0 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpc1: gpc1 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpc2: gpc2 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpc3: gpc3 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpg0: gpg0 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpd0: gpd0 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpd1: gpd1 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpd2: gpd2 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpd4: gpd4 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpd8: gpd8 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpd6: gpd6 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpd7: gpd7 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpg1: gpg1 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpg2: gpg2 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpg3: gpg3 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
hs_i2c8_bus: hs-i2c8-bus {
|
||||
samsung,pins = "gpb0-1", "gpb0-0";
|
||||
samsung,pin-function = <4>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
hs_i2c9_bus: hs-i2c9-bus {
|
||||
samsung,pins = "gpb0-3", "gpb0-2";
|
||||
samsung,pin-function = <4>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
i2s1_bus: i2s1-bus {
|
||||
samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
|
||||
"gpd4-3", "gpd4-4";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <1>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
pcm1_bus: pcm1-bus {
|
||||
samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
|
||||
"gpd4-3", "gpd4-4";
|
||||
samsung,pin-function = <3>;
|
||||
samsung,pin-pud = <1>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
spdif_bus: spdif-bus {
|
||||
samsung,pins = "gpd4-3", "gpd4-4";
|
||||
samsung,pin-function = <4>;
|
||||
samsung,pin-pud = <1>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
fimc_is_spi_pin0: fimc-is-spi-pin0 {
|
||||
samsung,pins = "gpc3-3", "gpc3-2", "gpc3-1", "gpc3-0";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
fimc_is_spi_pin1: fimc-is-spi-pin1 {
|
||||
samsung,pins = "gpc3-7", "gpc3-6", "gpc3-5", "gpc3-4";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
uart0_bus: uart0-bus {
|
||||
samsung,pins = "gpd0-3", "gpd0-2", "gpd0-1", "gpd0-0";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
};
|
||||
|
||||
hs_i2c2_bus: hs-i2c2-bus {
|
||||
samsung,pins = "gpd0-3", "gpd0-2";
|
||||
samsung,pin-function = <3>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
uart2_bus: uart2-bus {
|
||||
samsung,pins = "gpd1-5", "gpd1-4";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
};
|
||||
|
||||
uart1_bus: uart1-bus {
|
||||
samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
};
|
||||
|
||||
hs_i2c3_bus: hs-i2c3-bus {
|
||||
samsung,pins = "gpd1-3", "gpd1-2";
|
||||
samsung,pin-function = <3>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
hs_i2c0_bus: hs-i2c0-bus {
|
||||
samsung,pins = "gpd2-1", "gpd2-0";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
hs_i2c1_bus: hs-i2c1-bus {
|
||||
samsung,pins = "gpd2-3", "gpd2-2";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
pwm0_out: pwm0-out {
|
||||
samsung,pins = "gpd2-4";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
pwm1_out: pwm1-out {
|
||||
samsung,pins = "gpd2-5";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
pwm2_out: pwm2-out {
|
||||
samsung,pins = "gpd2-6";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
pwm3_out: pwm3-out {
|
||||
samsung,pins = "gpd2-7";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
spi1_bus: spi1-bus {
|
||||
samsung,pins = "gpd6-2", "gpd6-4", "gpd6-5";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
hs_i2c7_bus: hs-i2c7-bus {
|
||||
samsung,pins = "gpd2-7", "gpd2-6";
|
||||
samsung,pin-function = <4>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
spi0_bus: spi0-bus {
|
||||
samsung,pins = "gpd8-0", "gpd6-0", "gpd6-1";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
hs_i2c10_bus: hs-i2c10-bus {
|
||||
samsung,pins = "gpg3-1", "gpg3-0";
|
||||
samsung,pin-function = <4>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
hs_i2c11_bus: hs-i2c11-bus {
|
||||
samsung,pins = "gpg3-3", "gpg3-2";
|
||||
samsung,pin-function = <4>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
spi3_bus: spi3-bus {
|
||||
samsung,pins = "gpg3-4", "gpg3-6", "gpg3-7";
|
||||
samsung,pin-function = <3>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
spi4_bus: spi4-bus {
|
||||
samsung,pins = "gpv7-1", "gpv7-3", "gpv7-4";
|
||||
samsung,pin-function = <3>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
fimc_is_uart: fimc-is-uart {
|
||||
samsung,pins = "gpc1-1", "gpc0-7";
|
||||
samsung,pin-function = <3>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
fimc_is_ch0_i2c: fimc-is-ch0_i2c {
|
||||
samsung,pins = "gpc2-1", "gpc2-0";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
fimc_is_ch0_mclk: fimc-is-ch0_mclk {
|
||||
samsung,pins = "gpd7-0";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
fimc_is_ch1_i2c: fimc-is-ch1-i2c {
|
||||
samsung,pins = "gpc2-3", "gpc2-2";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
fimc_is_ch1_mclk: fimc-is-ch1-mclk {
|
||||
samsung,pins = "gpd7-1";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
fimc_is_ch2_i2c: fimc-is-ch2-i2c {
|
||||
samsung,pins = "gpc2-5", "gpc2-4";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
fimc_is_ch2_mclk: fimc-is-ch2-mclk {
|
||||
samsung,pins = "gpd7-2";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl_touch {
|
||||
gpj1: gpj1 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
hs_i2c5_bus: hs-i2c5-bus {
|
||||
samsung,pins = "gpj1-1", "gpj1-0";
|
||||
samsung,pin-function = <4>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
};
|
||||
@ -0,0 +1,23 @@
|
||||
/*
|
||||
* Device tree sources for Exynos5433 TMU sensor configuration
|
||||
*
|
||||
* Copyright (c) 2016 Jonghwa Lee <jonghwa3.lee@samsung.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/thermal/thermal_exynos.h>
|
||||
|
||||
#thermal-sensor-cells = <0>;
|
||||
samsung,tmu_gain = <8>;
|
||||
samsung,tmu_reference_voltage = <23>;
|
||||
samsung,tmu_noise_cancel_mode = <4>;
|
||||
samsung,tmu_efuse_value = <75>;
|
||||
samsung,tmu_min_efuse_value = <40>;
|
||||
samsung,tmu_max_efuse_value = <150>;
|
||||
samsung,tmu_first_point_trim = <25>;
|
||||
samsung,tmu_second_point_trim = <85>;
|
||||
samsung,tmu_default_temp_offset = <50>;
|
||||
samsung,tmu_mux_addr = <6>;
|
||||
22
arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
Normal file
22
arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
Normal file
@ -0,0 +1,22 @@
|
||||
/*
|
||||
* Device tree sources for Exynos5433 TMU sensor configuration
|
||||
*
|
||||
* Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/thermal/thermal_exynos.h>
|
||||
|
||||
#thermal-sensor-cells = <0>;
|
||||
samsung,tmu_gain = <8>;
|
||||
samsung,tmu_reference_voltage = <16>;
|
||||
samsung,tmu_noise_cancel_mode = <4>;
|
||||
samsung,tmu_efuse_value = <75>;
|
||||
samsung,tmu_min_efuse_value = <40>;
|
||||
samsung,tmu_max_efuse_value = <150>;
|
||||
samsung,tmu_first_point_trim = <25>;
|
||||
samsung,tmu_second_point_trim = <85>;
|
||||
samsung,tmu_default_temp_offset = <50>;
|
||||
296
arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
Normal file
296
arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
Normal file
@ -0,0 +1,296 @@
|
||||
/*
|
||||
* Device tree sources for Exynos5433 thermal zone
|
||||
*
|
||||
* Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/thermal/thermal.h>
|
||||
|
||||
/ {
|
||||
thermal-zones {
|
||||
atlas0_thermal: atlas0-thermal {
|
||||
thermal-sensors = <&tmu_atlas0>;
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <0>;
|
||||
trips {
|
||||
atlas0_alert_0: atlas0-alert-0 {
|
||||
temperature = <65000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
atlas0_alert_1: atlas0-alert-1 {
|
||||
temperature = <70000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
atlas0_alert_2: atlas0-alert-2 {
|
||||
temperature = <75000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
atlas0_alert_3: atlas0-alert-3 {
|
||||
temperature = <80000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
atlas0_alert_4: atlas0-alert-4 {
|
||||
temperature = <85000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
atlas0_alert_5: atlas0-alert-5 {
|
||||
temperature = <90000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
atlas0_alert_6: atlas0-alert-6 {
|
||||
temperature = <95000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
map0 {
|
||||
/* Set maximum frequency as 1800MHz */
|
||||
trip = <&atlas0_alert_0>;
|
||||
cooling-device = <&cpu4 1 2>;
|
||||
};
|
||||
map1 {
|
||||
/* Set maximum frequency as 1700MHz */
|
||||
trip = <&atlas0_alert_1>;
|
||||
cooling-device = <&cpu4 2 3>;
|
||||
};
|
||||
map2 {
|
||||
/* Set maximum frequency as 1600MHz */
|
||||
trip = <&atlas0_alert_2>;
|
||||
cooling-device = <&cpu4 3 4>;
|
||||
};
|
||||
map3 {
|
||||
/* Set maximum frequency as 1500MHz */
|
||||
trip = <&atlas0_alert_3>;
|
||||
cooling-device = <&cpu4 4 5>;
|
||||
};
|
||||
map4 {
|
||||
/* Set maximum frequency as 1400MHz */
|
||||
trip = <&atlas0_alert_4>;
|
||||
cooling-device = <&cpu4 5 7>;
|
||||
};
|
||||
map5 {
|
||||
/* Set maximum frequencyas 1200MHz */
|
||||
trip = <&atlas0_alert_5>;
|
||||
cooling-device = <&cpu4 7 9>;
|
||||
};
|
||||
map6 {
|
||||
/* Set maximum frequency as 1000MHz */
|
||||
trip = <&atlas0_alert_6>;
|
||||
cooling-device = <&cpu4 9 14>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
atlas1_thermal: atlas1-thermal {
|
||||
thermal-sensors = <&tmu_atlas1>;
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <0>;
|
||||
trips {
|
||||
atlas1_alert_0: atlas1-alert-0 {
|
||||
temperature = <65000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
atlas1_alert_1: atlas1-alert-1 {
|
||||
temperature = <70000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
atlas1_alert_2: atlas1-alert-2 {
|
||||
temperature = <75000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
atlas1_alert_3: atlas1-alert-3 {
|
||||
temperature = <80000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
atlas1_alert_4: atlas1-alert-4 {
|
||||
temperature = <85000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
atlas1_alert_5: atlas1-alert-5 {
|
||||
temperature = <90000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
atlas1_alert_6: atlas1-alert-6 {
|
||||
temperature = <95000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
g3d_thermal: g3d-thermal {
|
||||
thermal-sensors = <&tmu_g3d>;
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <0>;
|
||||
trips {
|
||||
g3d_alert_0: g3d-alert-0 {
|
||||
temperature = <70000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
g3d_alert_1: g3d-alert-1 {
|
||||
temperature = <75000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
g3d_alert_2: g3d-alert-2 {
|
||||
temperature = <80000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
g3d_alert_3: g3d-alert-3 {
|
||||
temperature = <85000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
g3d_alert_4: g3d-alert-4 {
|
||||
temperature = <90000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
g3d_alert_5: g3d-alert-5 {
|
||||
temperature = <95000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
g3d_alert_6: g3d-alert-6 {
|
||||
temperature = <100000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
apollo_thermal: apollo-thermal {
|
||||
thermal-sensors = <&tmu_apollo>;
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <0>;
|
||||
trips {
|
||||
apollo_alert_0: apollo-alert-0 {
|
||||
temperature = <65000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
apollo_alert_1: apollo-alert-1 {
|
||||
temperature = <70000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
apollo_alert_2: apollo-alert-2 {
|
||||
temperature = <75000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
apollo_alert_3: apollo-alert-3 {
|
||||
temperature = <80000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
apollo_alert_4: apollo-alert-4 {
|
||||
temperature = <85000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
apollo_alert_5: apollo-alert-5 {
|
||||
temperature = <90000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
apollo_alert_6: apollo-alert-6 {
|
||||
temperature = <95000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
map0 {
|
||||
/* Set maximum frequency as 1200MHz */
|
||||
trip = <&apollo_alert_2>;
|
||||
cooling-device = <&cpu0 1 2>;
|
||||
};
|
||||
map1 {
|
||||
/* Set maximum frequency as 1100MHz */
|
||||
trip = <&apollo_alert_3>;
|
||||
cooling-device = <&cpu0 2 3>;
|
||||
};
|
||||
map2 {
|
||||
/* Set maximum frequency as 1000MHz */
|
||||
trip = <&apollo_alert_4>;
|
||||
cooling-device = <&cpu0 3 4>;
|
||||
};
|
||||
map3 {
|
||||
/* Set maximum frequency as 900MHz */
|
||||
trip = <&apollo_alert_5>;
|
||||
cooling-device = <&cpu0 4 5>;
|
||||
};
|
||||
map4 {
|
||||
/* Set maximum frequency as 800MHz */
|
||||
trip = <&apollo_alert_6>;
|
||||
cooling-device = <&cpu0 5 9>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
isp_thermal: isp-thermal {
|
||||
thermal-sensors = <&tmu_isp>;
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <0>;
|
||||
trips {
|
||||
isp_alert_0: isp-alert-0 {
|
||||
temperature = <80000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
isp_alert_1: isp-alert-1 {
|
||||
temperature = <85000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
isp_alert_2: isp-alert-2 {
|
||||
temperature = <90000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
isp_alert_3: isp-alert-3 {
|
||||
temperature = <95000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
isp_alert_4: isp-alert-4 {
|
||||
temperature = <100000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
isp_alert_5: isp-alert-5 {
|
||||
temperature = <105000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
isp_alert_6: isp-alert-6 {
|
||||
temperature = <110000>; /* millicelsius */
|
||||
hysteresis = <1000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
1356
arch/arm64/boot/dts/exynos/exynos5433.dtsi
Normal file
1356
arch/arm64/boot/dts/exynos/exynos5433.dtsi
Normal file
File diff suppressed because it is too large
Load Diff
Loading…
Reference in New Issue
Block a user