linux/drivers/gpu/drm/msm/dsi/dsi_manager.c

849 lines
22 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*/
#include "msm_kms.h"
#include "dsi.h"
#define DSI_CLOCK_MASTER DSI_0
#define DSI_CLOCK_SLAVE DSI_1
#define DSI_LEFT DSI_0
#define DSI_RIGHT DSI_1
/* According to the current drm framework sequence, take the encoder of
* DSI_1 as master encoder
*/
#define DSI_ENCODER_MASTER DSI_1
#define DSI_ENCODER_SLAVE DSI_0
struct msm_dsi_manager {
struct msm_dsi *dsi[DSI_MAX];
bool is_dual_dsi;
bool is_sync_needed;
int master_dsi_link_id;
};
static struct msm_dsi_manager msm_dsim_glb;
#define IS_DUAL_DSI() (msm_dsim_glb.is_dual_dsi)
#define IS_SYNC_NEEDED() (msm_dsim_glb.is_sync_needed)
#define IS_MASTER_DSI_LINK(id) (msm_dsim_glb.master_dsi_link_id == id)
static inline struct msm_dsi *dsi_mgr_get_dsi(int id)
{
return msm_dsim_glb.dsi[id];
}
static inline struct msm_dsi *dsi_mgr_get_other_dsi(int id)
{
return msm_dsim_glb.dsi[(id + 1) % DSI_MAX];
}
static int dsi_mgr_parse_dual_dsi(struct device_node *np, int id)
{
struct msm_dsi_manager *msm_dsim = &msm_dsim_glb;
/* We assume 2 dsi nodes have the same information of dual-dsi and
* sync-mode, and only one node specifies master in case of dual mode.
*/
if (!msm_dsim->is_dual_dsi)
msm_dsim->is_dual_dsi = of_property_read_bool(
np, "qcom,dual-dsi-mode");
if (msm_dsim->is_dual_dsi) {
if (of_property_read_bool(np, "qcom,master-dsi"))
msm_dsim->master_dsi_link_id = id;
if (!msm_dsim->is_sync_needed)
msm_dsim->is_sync_needed = of_property_read_bool(
np, "qcom,sync-dual-dsi");
}
return 0;
}
static int dsi_mgr_setup_components(int id)
{
struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
struct msm_dsi *other_dsi = dsi_mgr_get_other_dsi(id);
struct msm_dsi *clk_master_dsi = dsi_mgr_get_dsi(DSI_CLOCK_MASTER);
struct msm_dsi *clk_slave_dsi = dsi_mgr_get_dsi(DSI_CLOCK_SLAVE);
struct msm_dsi_pll *src_pll;
int ret;
if (!IS_DUAL_DSI()) {
ret = msm_dsi_host_register(msm_dsi->host, true);
if (ret)
return ret;
msm_dsi_phy_set_usecase(msm_dsi->phy, MSM_DSI_PHY_STANDALONE);
src_pll = msm_dsi_phy_get_pll(msm_dsi->phy);
if (IS_ERR(src_pll))
return PTR_ERR(src_pll);
ret = msm_dsi_host_set_src_pll(msm_dsi->host, src_pll);
} else if (!other_dsi) {
ret = 0;
} else {
struct msm_dsi *master_link_dsi = IS_MASTER_DSI_LINK(id) ?
msm_dsi : other_dsi;
struct msm_dsi *slave_link_dsi = IS_MASTER_DSI_LINK(id) ?
other_dsi : msm_dsi;
/* Register slave host first, so that slave DSI device
* has a chance to probe, and do not block the master
* DSI device's probe.
* Also, do not check defer for the slave host,
* because only master DSI device adds the panel to global
* panel list. The panel's device is the master DSI device.
*/
ret = msm_dsi_host_register(slave_link_dsi->host, false);
if (ret)
return ret;
ret = msm_dsi_host_register(master_link_dsi->host, true);
if (ret)
return ret;
/* PLL0 is to drive both 2 DSI link clocks in Dual DSI mode. */
msm_dsi_phy_set_usecase(clk_master_dsi->phy,
MSM_DSI_PHY_MASTER);
msm_dsi_phy_set_usecase(clk_slave_dsi->phy,
MSM_DSI_PHY_SLAVE);
src_pll = msm_dsi_phy_get_pll(clk_master_dsi->phy);
if (IS_ERR(src_pll))
return PTR_ERR(src_pll);
ret = msm_dsi_host_set_src_pll(msm_dsi->host, src_pll);
if (ret)
return ret;
ret = msm_dsi_host_set_src_pll(other_dsi->host, src_pll);
}
return ret;
}
static int enable_phy(struct msm_dsi *msm_dsi, int src_pll_id,
struct msm_dsi_phy_shared_timings *shared_timings)
{
struct msm_dsi_phy_clk_request clk_req;
int ret;
bool is_dual_dsi = IS_DUAL_DSI();
msm_dsi_host_get_phy_clk_req(msm_dsi->host, &clk_req, is_dual_dsi);
ret = msm_dsi_phy_enable(msm_dsi->phy, src_pll_id, &clk_req);
msm_dsi_phy_get_shared_timings(msm_dsi->phy, shared_timings);
return ret;
}
static int
dsi_mgr_phy_enable(int id,
struct msm_dsi_phy_shared_timings shared_timings[DSI_MAX])
{
struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
struct msm_dsi *mdsi = dsi_mgr_get_dsi(DSI_CLOCK_MASTER);
struct msm_dsi *sdsi = dsi_mgr_get_dsi(DSI_CLOCK_SLAVE);
int src_pll_id = IS_DUAL_DSI() ? DSI_CLOCK_MASTER : id;
int ret;
/* In case of dual DSI, some registers in PHY1 have been programmed
* during PLL0 clock's set_rate. The PHY1 reset called by host1 here
* will silently reset those PHY1 registers. Therefore we need to reset
* and enable both PHYs before any PLL clock operation.
*/
if (IS_DUAL_DSI() && mdsi && sdsi) {
if (!mdsi->phy_enabled && !sdsi->phy_enabled) {
msm_dsi_host_reset_phy(mdsi->host);
msm_dsi_host_reset_phy(sdsi->host);
ret = enable_phy(mdsi, src_pll_id,
&shared_timings[DSI_CLOCK_MASTER]);
if (ret)
return ret;
ret = enable_phy(sdsi, src_pll_id,
&shared_timings[DSI_CLOCK_SLAVE]);
if (ret) {
msm_dsi_phy_disable(mdsi->phy);
return ret;
}
}
} else {
msm_dsi_host_reset_phy(msm_dsi->host);
ret = enable_phy(msm_dsi, src_pll_id, &shared_timings[id]);
if (ret)
return ret;
}
msm_dsi->phy_enabled = true;
return 0;
}
static void dsi_mgr_phy_disable(int id)
{
struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
struct msm_dsi *mdsi = dsi_mgr_get_dsi(DSI_CLOCK_MASTER);
struct msm_dsi *sdsi = dsi_mgr_get_dsi(DSI_CLOCK_SLAVE);
/* disable DSI phy
* In dual-dsi configuration, the phy should be disabled for the
* first controller only when the second controller is disabled.
*/
msm_dsi->phy_enabled = false;
if (IS_DUAL_DSI() && mdsi && sdsi) {
if (!mdsi->phy_enabled && !sdsi->phy_enabled) {
msm_dsi_phy_disable(sdsi->phy);
msm_dsi_phy_disable(mdsi->phy);
}
} else {
msm_dsi_phy_disable(msm_dsi->phy);
}
}
struct dsi_connector {
struct drm_connector base;
int id;
};
struct dsi_bridge {
struct drm_bridge base;
int id;
};
#define to_dsi_connector(x) container_of(x, struct dsi_connector, base)
#define to_dsi_bridge(x) container_of(x, struct dsi_bridge, base)
static inline int dsi_mgr_connector_get_id(struct drm_connector *connector)
{
struct dsi_connector *dsi_connector = to_dsi_connector(connector);
return dsi_connector->id;
}
static int dsi_mgr_bridge_get_id(struct drm_bridge *bridge)
{
struct dsi_bridge *dsi_bridge = to_dsi_bridge(bridge);
return dsi_bridge->id;
}
static bool dsi_mgr_is_cmd_mode(struct msm_dsi *msm_dsi)
{
unsigned long host_flags = msm_dsi_host_get_mode_flags(msm_dsi->host);
return !(host_flags & MIPI_DSI_MODE_VIDEO);
}
void msm_dsi_manager_setup_encoder(int id)
{
struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
struct msm_drm_private *priv = msm_dsi->dev->dev_private;
struct msm_kms *kms = priv->kms;
struct drm_encoder *encoder = msm_dsi_get_encoder(msm_dsi);
if (encoder && kms->funcs->set_encoder_mode)
kms->funcs->set_encoder_mode(kms, encoder,
dsi_mgr_is_cmd_mode(msm_dsi));
}
static int msm_dsi_manager_panel_init(struct drm_connector *conn, u8 id)
{
struct msm_drm_private *priv = conn->dev->dev_private;
struct msm_kms *kms = priv->kms;
struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
struct msm_dsi *other_dsi = dsi_mgr_get_other_dsi(id);
struct msm_dsi *master_dsi, *slave_dsi;
struct drm_panel *panel;
if (IS_DUAL_DSI() && !IS_MASTER_DSI_LINK(id)) {
master_dsi = other_dsi;
slave_dsi = msm_dsi;
} else {
master_dsi = msm_dsi;
slave_dsi = other_dsi;
}
/*
* There is only 1 panel in the global panel list for dual DSI mode.
* Therefore slave dsi should get the drm_panel instance from master
* dsi.
*/
panel = msm_dsi_host_get_panel(master_dsi->host);
if (IS_ERR(panel)) {
DRM_ERROR("Could not find panel for %u (%ld)\n", msm_dsi->id,
PTR_ERR(panel));
return PTR_ERR(panel);
}
if (!panel || !IS_DUAL_DSI())
goto out;
drm_object_attach_property(&conn->base,
conn->dev->mode_config.tile_property, 0);
/*
* Set split display info to kms once dual DSI panel is connected to
* both hosts.
*/
if (other_dsi && other_dsi->panel && kms->funcs->set_split_display) {
kms->funcs->set_split_display(kms, master_dsi->encoder,
slave_dsi->encoder,
dsi_mgr_is_cmd_mode(msm_dsi));
}
out:
msm_dsi->panel = panel;
return 0;
}
static enum drm_connector_status dsi_mgr_connector_detect(
struct drm_connector *connector, bool force)
{
int id = dsi_mgr_connector_get_id(connector);
struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
return msm_dsi->panel ? connector_status_connected :
connector_status_disconnected;
}
static void dsi_mgr_connector_destroy(struct drm_connector *connector)
{
struct dsi_connector *dsi_connector = to_dsi_connector(connector);
DBG("");
drm_connector_cleanup(connector);
kfree(dsi_connector);
}
static int dsi_mgr_connector_get_modes(struct drm_connector *connector)
{
int id = dsi_mgr_connector_get_id(connector);
struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
struct drm_panel *panel = msm_dsi->panel;
int num;
if (!panel)
return 0;
/*
* In dual DSI mode, we have one connector that can be
* attached to the drm_panel.
*/
drm_panel_attach(panel, connector);
num = drm_panel_get_modes(panel);
if (!num)
return 0;
return num;
}
static int dsi_mgr_connector_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
int id = dsi_mgr_connector_get_id(connector);
struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
struct drm_encoder *encoder = msm_dsi_get_encoder(msm_dsi);
struct msm_drm_private *priv = connector->dev->dev_private;
struct msm_kms *kms = priv->kms;
long actual, requested;
DBG("");
requested = 1000 * mode->clock;
actual = kms->funcs->round_pixclk(kms, requested, encoder);
DBG("requested=%ld, actual=%ld", requested, actual);
if (actual != requested)
return MODE_CLOCK_RANGE;
return MODE_OK;
}
static struct drm_encoder *
dsi_mgr_connector_best_encoder(struct drm_connector *connector)
{
int id = dsi_mgr_connector_get_id(connector);
struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
DBG("");
return msm_dsi_get_encoder(msm_dsi);
}
static void dsi_mgr_bridge_pre_enable(struct drm_bridge *bridge)
{
int id = dsi_mgr_bridge_get_id(bridge);
struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
struct msm_dsi *msm_dsi1 = dsi_mgr_get_dsi(DSI_1);
struct mipi_dsi_host *host = msm_dsi->host;
struct drm_panel *panel = msm_dsi->panel;
struct msm_dsi_phy_shared_timings phy_shared_timings[DSI_MAX];
bool is_dual_dsi = IS_DUAL_DSI();
int ret;
DBG("id=%d", id);
if (!msm_dsi_device_connected(msm_dsi))
return;
ret = dsi_mgr_phy_enable(id, phy_shared_timings);
if (ret)
goto phy_en_fail;
/* Do nothing with the host if it is slave-DSI in case of dual DSI */
if (is_dual_dsi && !IS_MASTER_DSI_LINK(id))
return;
ret = msm_dsi_host_power_on(host, &phy_shared_timings[id], is_dual_dsi);
if (ret) {
pr_err("%s: power on host %d failed, %d\n", __func__, id, ret);
goto host_on_fail;
}
if (is_dual_dsi && msm_dsi1) {
ret = msm_dsi_host_power_on(msm_dsi1->host,
&phy_shared_timings[DSI_1], is_dual_dsi);
if (ret) {
pr_err("%s: power on host1 failed, %d\n",
__func__, ret);
goto host1_on_fail;
}
}
/* Always call panel functions once, because even for dual panels,
* there is only one drm_panel instance.
*/
if (panel) {
ret = drm_panel_prepare(panel);
if (ret) {
pr_err("%s: prepare panel %d failed, %d\n", __func__,
id, ret);
goto panel_prep_fail;
}
}
ret = msm_dsi_host_enable(host);
if (ret) {
pr_err("%s: enable host %d failed, %d\n", __func__, id, ret);
goto host_en_fail;
}
if (is_dual_dsi && msm_dsi1) {
ret = msm_dsi_host_enable(msm_dsi1->host);
if (ret) {
pr_err("%s: enable host1 failed, %d\n", __func__, ret);
goto host1_en_fail;
}
}
return;
host1_en_fail:
msm_dsi_host_disable(host);
host_en_fail:
if (panel)
drm_panel_unprepare(panel);
panel_prep_fail:
if (is_dual_dsi && msm_dsi1)
msm_dsi_host_power_off(msm_dsi1->host);
host1_on_fail:
msm_dsi_host_power_off(host);
host_on_fail:
dsi_mgr_phy_disable(id);
phy_en_fail:
return;
}
static void dsi_mgr_bridge_enable(struct drm_bridge *bridge)
{
drm/msm/dsi: Delay drm_panel_enable() until dsi_mgr_bridge_enable() At the moment, the MSM DSI driver calls drm_panel_enable() rather early from the DSI bridge pre_enable() function. At this point, the encoder (e.g. MDP5) is not enabled, so we have not started transmitting video data. However, the drm_panel_funcs documentation states that enable() should be called on the panel *after* video data is being transmitted: The .prepare() function is typically called before the display controller starts to transmit video data. [...] After the display controller has started transmitting video data, it's safe to call the .enable() function. This will typically enable the backlight to make the image on screen visible. Calling drm_panel_enable() too early causes problems for some panels: The TFT LCD panel used in the Samsung Galaxy Tab A 9.7 (2015) (APQ8016) uses the MIPI_DCS_SET_DISPLAY_BRIGHTNESS command to control backlight/brightness of the screen. The enable sequence is therefore: drm_panel_enable() drm_panel_funcs.enable(): backlight_enable() backlight_ops.update_status(): mipi_dsi_dcs_set_display_brightness(dsi, bl->props.brightness); The panel seems to silently ignore the MIPI_DCS_SET_DISPLAY_BRIGHTNESS command if it is sent too early. This prevents setting the initial brightness, causing the display to be enabled with minimum brightness instead. Adding various delays in the panel initialization code does not result in any difference. On the other hand, moving drm_panel_enable() to dsi_mgr_bridge_enable() fixes the problem, indicating that the panel requires the video stream to be active before the brightness command is accepted. Therefore: Move drm_panel_enable() to dsi_mgr_bridge_enable() to delay calling it until video data is being transmitted. Move drm_panel_disable() to dsi_mgr_bridge_disable() for similar reasons. (This is not strictly required for the panel affected above...) Tested-by: Jasper Korten <jja2000@gmail.com> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Tested-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-11-08 21:28:40 +00:00
int id = dsi_mgr_bridge_get_id(bridge);
struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
struct drm_panel *panel = msm_dsi->panel;
bool is_dual_dsi = IS_DUAL_DSI();
int ret;
DBG("id=%d", id);
if (!msm_dsi_device_connected(msm_dsi))
return;
/* Do nothing with the host if it is slave-DSI in case of dual DSI */
if (is_dual_dsi && !IS_MASTER_DSI_LINK(id))
return;
if (panel) {
ret = drm_panel_enable(panel);
if (ret) {
pr_err("%s: enable panel %d failed, %d\n", __func__, id,
ret);
}
}
}
static void dsi_mgr_bridge_disable(struct drm_bridge *bridge)
{
drm/msm/dsi: Delay drm_panel_enable() until dsi_mgr_bridge_enable() At the moment, the MSM DSI driver calls drm_panel_enable() rather early from the DSI bridge pre_enable() function. At this point, the encoder (e.g. MDP5) is not enabled, so we have not started transmitting video data. However, the drm_panel_funcs documentation states that enable() should be called on the panel *after* video data is being transmitted: The .prepare() function is typically called before the display controller starts to transmit video data. [...] After the display controller has started transmitting video data, it's safe to call the .enable() function. This will typically enable the backlight to make the image on screen visible. Calling drm_panel_enable() too early causes problems for some panels: The TFT LCD panel used in the Samsung Galaxy Tab A 9.7 (2015) (APQ8016) uses the MIPI_DCS_SET_DISPLAY_BRIGHTNESS command to control backlight/brightness of the screen. The enable sequence is therefore: drm_panel_enable() drm_panel_funcs.enable(): backlight_enable() backlight_ops.update_status(): mipi_dsi_dcs_set_display_brightness(dsi, bl->props.brightness); The panel seems to silently ignore the MIPI_DCS_SET_DISPLAY_BRIGHTNESS command if it is sent too early. This prevents setting the initial brightness, causing the display to be enabled with minimum brightness instead. Adding various delays in the panel initialization code does not result in any difference. On the other hand, moving drm_panel_enable() to dsi_mgr_bridge_enable() fixes the problem, indicating that the panel requires the video stream to be active before the brightness command is accepted. Therefore: Move drm_panel_enable() to dsi_mgr_bridge_enable() to delay calling it until video data is being transmitted. Move drm_panel_disable() to dsi_mgr_bridge_disable() for similar reasons. (This is not strictly required for the panel affected above...) Tested-by: Jasper Korten <jja2000@gmail.com> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Tested-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-11-08 21:28:40 +00:00
int id = dsi_mgr_bridge_get_id(bridge);
struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
struct drm_panel *panel = msm_dsi->panel;
bool is_dual_dsi = IS_DUAL_DSI();
int ret;
DBG("id=%d", id);
if (!msm_dsi_device_connected(msm_dsi))
return;
/* Do nothing with the host if it is slave-DSI in case of dual DSI */
if (is_dual_dsi && !IS_MASTER_DSI_LINK(id))
return;
if (panel) {
ret = drm_panel_disable(panel);
if (ret)
pr_err("%s: Panel %d OFF failed, %d\n", __func__, id,
ret);
}
}
static void dsi_mgr_bridge_post_disable(struct drm_bridge *bridge)
{
int id = dsi_mgr_bridge_get_id(bridge);
struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
struct msm_dsi *msm_dsi1 = dsi_mgr_get_dsi(DSI_1);
struct mipi_dsi_host *host = msm_dsi->host;
struct drm_panel *panel = msm_dsi->panel;
bool is_dual_dsi = IS_DUAL_DSI();
int ret;
DBG("id=%d", id);
if (!msm_dsi_device_connected(msm_dsi))
return;
/*
* Do nothing with the host if it is slave-DSI in case of dual DSI.
* It is safe to call dsi_mgr_phy_disable() here because a single PHY
* won't be diabled until both PHYs request disable.
*/
if (is_dual_dsi && !IS_MASTER_DSI_LINK(id))
goto disable_phy;
ret = msm_dsi_host_disable(host);
if (ret)
pr_err("%s: host %d disable failed, %d\n", __func__, id, ret);
if (is_dual_dsi && msm_dsi1) {
ret = msm_dsi_host_disable(msm_dsi1->host);
if (ret)
pr_err("%s: host1 disable failed, %d\n", __func__, ret);
}
if (panel) {
ret = drm_panel_unprepare(panel);
if (ret)
pr_err("%s: Panel %d unprepare failed,%d\n", __func__,
id, ret);
}
ret = msm_dsi_host_power_off(host);
if (ret)
pr_err("%s: host %d power off failed,%d\n", __func__, id, ret);
if (is_dual_dsi && msm_dsi1) {
ret = msm_dsi_host_power_off(msm_dsi1->host);
if (ret)
pr_err("%s: host1 power off failed, %d\n",
__func__, ret);
}
disable_phy:
dsi_mgr_phy_disable(id);
}
static void dsi_mgr_bridge_mode_set(struct drm_bridge *bridge,
const struct drm_display_mode *mode,
const struct drm_display_mode *adjusted_mode)
{
int id = dsi_mgr_bridge_get_id(bridge);
struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
struct msm_dsi *other_dsi = dsi_mgr_get_other_dsi(id);
struct mipi_dsi_host *host = msm_dsi->host;
bool is_dual_dsi = IS_DUAL_DSI();
DBG("set mode: " DRM_MODE_FMT, DRM_MODE_ARG(mode));
if (is_dual_dsi && !IS_MASTER_DSI_LINK(id))
return;
msm_dsi_host_set_display_mode(host, adjusted_mode);
if (is_dual_dsi && other_dsi)
msm_dsi_host_set_display_mode(other_dsi->host, adjusted_mode);
}
static const struct drm_connector_funcs dsi_mgr_connector_funcs = {
.detect = dsi_mgr_connector_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = dsi_mgr_connector_destroy,
.reset = drm_atomic_helper_connector_reset,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
static const struct drm_connector_helper_funcs dsi_mgr_conn_helper_funcs = {
.get_modes = dsi_mgr_connector_get_modes,
.mode_valid = dsi_mgr_connector_mode_valid,
.best_encoder = dsi_mgr_connector_best_encoder,
};
static const struct drm_bridge_funcs dsi_mgr_bridge_funcs = {
.pre_enable = dsi_mgr_bridge_pre_enable,
.enable = dsi_mgr_bridge_enable,
.disable = dsi_mgr_bridge_disable,
.post_disable = dsi_mgr_bridge_post_disable,
.mode_set = dsi_mgr_bridge_mode_set,
};
/* initialize connector when we're connected to a drm_panel */
struct drm_connector *msm_dsi_manager_connector_init(u8 id)
{
struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
struct drm_connector *connector = NULL;
struct dsi_connector *dsi_connector;
int ret;
dsi_connector = kzalloc(sizeof(*dsi_connector), GFP_KERNEL);
if (!dsi_connector)
return ERR_PTR(-ENOMEM);
dsi_connector->id = id;
connector = &dsi_connector->base;
ret = drm_connector_init(msm_dsi->dev, connector,
&dsi_mgr_connector_funcs, DRM_MODE_CONNECTOR_DSI);
if (ret)
return ERR_PTR(ret);
drm_connector_helper_add(connector, &dsi_mgr_conn_helper_funcs);
/* Enable HPD to let hpd event is handled
* when panel is attached to the host.
*/
connector->polled = DRM_CONNECTOR_POLL_HPD;
/* Display driver doesn't support interlace now. */
connector->interlace_allowed = 0;
connector->doublescan_allowed = 0;
drm_connector_attach_encoder(connector, msm_dsi->encoder);
ret = msm_dsi_manager_panel_init(connector, id);
if (ret) {
DRM_DEV_ERROR(msm_dsi->dev->dev, "init panel failed %d\n", ret);
goto fail;
}
return connector;
fail:
connector->funcs->destroy(msm_dsi->connector);
return ERR_PTR(ret);
}
bool msm_dsi_manager_validate_current_config(u8 id)
{
bool is_dual_dsi = IS_DUAL_DSI();
/*
* For dual DSI, we only have one drm panel. For this
* use case, we register only one bridge/connector.
* Skip bridge/connector initialisation if it is
* slave-DSI for dual DSI configuration.
*/
if (is_dual_dsi && !IS_MASTER_DSI_LINK(id)) {
DBG("Skip bridge registration for slave DSI->id: %d\n", id);
return false;
}
return true;
}
/* initialize bridge */
struct drm_bridge *msm_dsi_manager_bridge_init(u8 id)
{
struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
struct drm_bridge *bridge = NULL;
struct dsi_bridge *dsi_bridge;
struct drm_encoder *encoder;
int ret;
dsi_bridge = devm_kzalloc(msm_dsi->dev->dev,
sizeof(*dsi_bridge), GFP_KERNEL);
if (!dsi_bridge) {
ret = -ENOMEM;
goto fail;
}
dsi_bridge->id = id;
encoder = msm_dsi->encoder;
bridge = &dsi_bridge->base;
bridge->funcs = &dsi_mgr_bridge_funcs;
ret = drm_bridge_attach(encoder, bridge, NULL);
if (ret)
goto fail;
return bridge;
fail:
if (bridge)
msm_dsi_manager_bridge_destroy(bridge);
return ERR_PTR(ret);
}
struct drm_connector *msm_dsi_manager_ext_bridge_init(u8 id)
{
struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
struct drm_device *dev = msm_dsi->dev;
struct drm_encoder *encoder;
struct drm_bridge *int_bridge, *ext_bridge;
struct drm_connector *connector;
struct list_head *connector_list;
int_bridge = msm_dsi->bridge;
ext_bridge = msm_dsi->external_bridge =
msm_dsi_host_get_bridge(msm_dsi->host);
encoder = msm_dsi->encoder;
/* link the internal dsi bridge to the external bridge */
drm_bridge_attach(encoder, ext_bridge, int_bridge);
/*
* we need the drm_connector created by the external bridge
* driver (or someone else) to feed it to our driver's
* priv->connector[] list, mainly for msm_fbdev_init()
*/
connector_list = &dev->mode_config.connector_list;
list_for_each_entry(connector, connector_list, head) {
if (drm_connector_has_possible_encoder(connector, encoder))
return connector;
}
return ERR_PTR(-ENODEV);
}
void msm_dsi_manager_bridge_destroy(struct drm_bridge *bridge)
{
}
int msm_dsi_manager_cmd_xfer(int id, const struct mipi_dsi_msg *msg)
{
struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
struct msm_dsi *msm_dsi0 = dsi_mgr_get_dsi(DSI_0);
struct mipi_dsi_host *host = msm_dsi->host;
bool is_read = (msg->rx_buf && msg->rx_len);
bool need_sync = (IS_SYNC_NEEDED() && !is_read);
int ret;
if (!msg->tx_buf || !msg->tx_len)
return 0;
/* In dual master case, panel requires the same commands sent to
* both DSI links. Host issues the command trigger to both links
* when DSI_1 calls the cmd transfer function, no matter it happens
* before or after DSI_0 cmd transfer.
*/
if (need_sync && (id == DSI_0))
return is_read ? msg->rx_len : msg->tx_len;
if (need_sync && msm_dsi0) {
ret = msm_dsi_host_xfer_prepare(msm_dsi0->host, msg);
if (ret) {
pr_err("%s: failed to prepare non-trigger host, %d\n",
__func__, ret);
return ret;
}
}
ret = msm_dsi_host_xfer_prepare(host, msg);
if (ret) {
pr_err("%s: failed to prepare host, %d\n", __func__, ret);
goto restore_host0;
}
ret = is_read ? msm_dsi_host_cmd_rx(host, msg) :
msm_dsi_host_cmd_tx(host, msg);
msm_dsi_host_xfer_restore(host, msg);
restore_host0:
if (need_sync && msm_dsi0)
msm_dsi_host_xfer_restore(msm_dsi0->host, msg);
return ret;
}
bool msm_dsi_manager_cmd_xfer_trigger(int id, u32 dma_base, u32 len)
{
struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
struct msm_dsi *msm_dsi0 = dsi_mgr_get_dsi(DSI_0);
struct mipi_dsi_host *host = msm_dsi->host;
if (IS_SYNC_NEEDED() && (id == DSI_0))
return false;
if (IS_SYNC_NEEDED() && msm_dsi0)
msm_dsi_host_cmd_xfer_commit(msm_dsi0->host, dma_base, len);
msm_dsi_host_cmd_xfer_commit(host, dma_base, len);
return true;
}
int msm_dsi_manager_register(struct msm_dsi *msm_dsi)
{
struct msm_dsi_manager *msm_dsim = &msm_dsim_glb;
int id = msm_dsi->id;
int ret;
if (id >= DSI_MAX) {
pr_err("%s: invalid id %d\n", __func__, id);
return -EINVAL;
}
if (msm_dsim->dsi[id]) {
pr_err("%s: dsi%d already registered\n", __func__, id);
return -EBUSY;
}
msm_dsim->dsi[id] = msm_dsi;
ret = dsi_mgr_parse_dual_dsi(msm_dsi->pdev->dev.of_node, id);
if (ret) {
pr_err("%s: failed to parse dual DSI info\n", __func__);
goto fail;
}
ret = dsi_mgr_setup_components(id);
if (ret) {
pr_err("%s: failed to register mipi dsi host for DSI %d\n",
__func__, id);
goto fail;
}
return 0;
fail:
msm_dsim->dsi[id] = NULL;
return ret;
}
void msm_dsi_manager_unregister(struct msm_dsi *msm_dsi)
{
struct msm_dsi_manager *msm_dsim = &msm_dsim_glb;
if (msm_dsi->host)
msm_dsi_host_unregister(msm_dsi->host);
if (msm_dsi->id >= 0)
msm_dsim->dsi[msm_dsi->id] = NULL;
}