leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
aa7eb9ad32
linux/drivers/usb/phy/Kconfig

212 lines
6.8 KiB
Plaintext
Raw Normal View History

USB: Add driver for NXP ISP1301 USB transceiver This new driver registers the NXP ISP1301 chip via the I2C subsystem. The chip is the USB transceiver shared by ohci-nxp, lpc32xx_udc (gadget) and isp1301_omap. ISP1301 is a very low-level driver that primarily separates out the I2C client registration of the ISP1301 chip (including instantiation via DT), used by other drivers, and declares the chip's registers. It's only a helper driver for some OHCI and USB device drivers. The driver can be considered as a register set extension of ohci-nxp, lpc32xx-udc and isp1301_omap, which in turn know best what to do with the low level functionality (individual ISP1301 registers and timing, see the different initialization strategies in those drivers). Those drivers previously internally duplicated ISP1301 register definitions which is solved by this new isp1301 driver. The ISP1301 registers exposed via isp1301.h can be accessed by other drivers using it with standard i2c_smbus_*() accesses. Following patches let the respective USB host and gadget drivers use this driver, instead of duplicating ISP1301 handling. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 14:47:04 +00:00
#
# Physical Layer USB driver configuration
#
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 09:51:41 +00:00
menu "USB Physical Layer drivers"
usb: phy: Improve Kconfig help for CONFIG_USB_PHY The previous text confused users by not describing the very common (e.g. x86 PC) sitations where no PHY driver is necessary. Signed-off-by: George Spelvin <linux@horizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17 05:45:50 +00:00
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 09:51:41 +00:00
config USB_PHY
def_bool n
USB: Add driver for NXP ISP1301 USB transceiver This new driver registers the NXP ISP1301 chip via the I2C subsystem. The chip is the USB transceiver shared by ohci-nxp, lpc32xx_udc (gadget) and isp1301_omap. ISP1301 is a very low-level driver that primarily separates out the I2C client registration of the ISP1301 chip (including instantiation via DT), used by other drivers, and declares the chip's registers. It's only a helper driver for some OHCI and USB device drivers. The driver can be considered as a register set extension of ohci-nxp, lpc32xx-udc and isp1301_omap, which in turn know best what to do with the low level functionality (individual ISP1301 registers and timing, see the different initialization strategies in those drivers). Those drivers previously internally duplicated ISP1301 register definitions which is solved by this new isp1301 driver. The ISP1301 registers exposed via isp1301.h can be accessed by other drivers using it with standard i2c_smbus_*() accesses. Following patches let the respective USB host and gadget drivers use this driver, instead of duplicating ISP1301 handling. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 14:47:04 +00:00
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 09:01:15 +00:00
#
# USB Transceiver Drivers
#
config AB8500_USB
tristate "AB8500 USB Transceiver Driver"
depends on AB8500_CORE
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 09:51:41 +00:00
select USB_PHY
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 09:01:15 +00:00
help
Enable this to support the USB OTG transceiver in AB8500 chip.
This transceiver supports high and full speed devices plus,
in host mode, low speed.
config FSL_USB2_OTG
bool "Freescale USB OTG Transceiver Driver"
PM / Kconfig: Replace PM_RUNTIME with PM in dependencies After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so Kconfig options depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace PM_RUNTIME with PM in Kconfig dependencies throughout the tree. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Tejun Heo <tj@kernel.org>
2014-12-12 23:44:04 +00:00
depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM
usb: gadget: move gadget API functions to udc-core instead of defining all functions as static inlines, let's move them to udc-core and export them with EXPORT_SYMBOL_GPL, that way we can make sure that only GPL drivers will use them. As a side effect, it'll be nicer to add tracepoints to the gadget API. While at that, also fix Kconfig dependencies to avoid randconfig build failures. Acked-By: Sebastian Reichel <sre@kernel.org> Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-05-31 10:07:47 +00:00
depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 09:51:41 +00:00
select USB_PHY
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 09:01:15 +00:00
help
Enable this to support Freescale USB OTG transceiver.
config ISP1301_OMAP
tristate "Philips ISP1301 with OMAP OTG"
depends on I2C && ARCH_OMAP_OTG
usb: phy: fix driver dependencies both isp1301-omap and fsl_usb2_otg drivers depend on usb_bus_start_enum() which is only defined if CONFIG_USB != n. There is a problem, however, where both those drivers could be statically linked, while CONFIG_USB=m. Fix the problem by fixing driver dependency. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-10 23:00:06 +00:00
depends on USB
usb: gadget: move gadget API functions to udc-core instead of defining all functions as static inlines, let's move them to udc-core and export them with EXPORT_SYMBOL_GPL, that way we can make sure that only GPL drivers will use them. As a side effect, it'll be nicer to add tracepoints to the gadget API. While at that, also fix Kconfig dependencies to avoid randconfig build failures. Acked-By: Sebastian Reichel <sre@kernel.org> Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-05-31 10:07:47 +00:00
depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 09:51:41 +00:00
select USB_PHY
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 09:01:15 +00:00
help
If you say yes here you get support for the Philips ISP1301
USB-On-The-Go transceiver working with the OMAP OTG controller.
The ISP1301 is a full speed USB transceiver which is used in
products including H2, H3, and H4 development boards for Texas
Instruments OMAP processors.
This driver can also be built as a module. If so, the module
usb: phy: fix some Kconfig descriptions Some module names are not up to date in Kconfig help texts. Fix that. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-21 18:37:38 +00:00
will be called phy-isp1301-omap.
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 09:01:15 +00:00
usb: phy: add Keystone usb phy driver Add Keystone platform USB PHY driver support. Current main purpose of this driver is to enable the PHY reference clock gate on the Keystone SoC. Otherwise it is a nop PHY. [ balbi@ti.com : add COMPILE_TEST as a possible dependency make sure drvdata is initialized before adding PHY ] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-12 17:25:30 +00:00
config KEYSTONE_USB_PHY
tristate "Keystone USB PHY Driver"
depends on ARCH_KEYSTONE || COMPILE_TEST
usb: gadget: move gadget API functions to udc-core instead of defining all functions as static inlines, let's move them to udc-core and export them with EXPORT_SYMBOL_GPL, that way we can make sure that only GPL drivers will use them. As a side effect, it'll be nicer to add tracepoints to the gadget API. While at that, also fix Kconfig dependencies to avoid randconfig build failures. Acked-By: Sebastian Reichel <sre@kernel.org> Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-05-31 10:07:47 +00:00
depends on NOP_USB_XCEIV
usb: phy: add Keystone usb phy driver Add Keystone platform USB PHY driver support. Current main purpose of this driver is to enable the PHY reference clock gate on the Keystone SoC. Otherwise it is a nop PHY. [ balbi@ti.com : add COMPILE_TEST as a possible dependency make sure drvdata is initialized before adding PHY ] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-12 17:25:30 +00:00
help
Enable this to support Keystone USB phy. This driver provides
interface to interact with USB 2.0 and USB 3.0 PHY that is part
of the Keystone SOC.
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 09:01:15 +00:00
config NOP_USB_XCEIV
tristate "NOP USB Transceiver Driver"
usb: gadget: move gadget API functions to udc-core instead of defining all functions as static inlines, let's move them to udc-core and export them with EXPORT_SYMBOL_GPL, that way we can make sure that only GPL drivers will use them. As a side effect, it'll be nicer to add tracepoints to the gadget API. While at that, also fix Kconfig dependencies to avoid randconfig build failures. Acked-By: Sebastian Reichel <sre@kernel.org> Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-05-31 10:07:47 +00:00
depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, NOP can't be built-in
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 09:51:41 +00:00
select USB_PHY
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 09:01:15 +00:00
help
This driver is to be used by all the usb transceiver which are either
built-in with usb ip or which are autonomous and doesn't require any
phy programming such as ISP1x04 etc.
usb: phy: Add AM335x PHY driver This driver is a redo of my earlier attempt. It uses parts of the generic PHY driver and uses the new control driver for the register the phy needs to power on/off the phy. It also enables easy access for the wakeup register which is not yet implemented. The difference between the omap attempt is: - no static holding variable - one global visible function which exports a struct with callbacks to access the "control" registers. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-30 19:43:45 +00:00
config AM335X_CONTROL_USB
tristate
config AM335X_PHY_USB
tristate "AM335x USB PHY Driver"
USB: phy: Restrict AM335x PHY driver to only be built on !ARM when COMPILE_TEST is set. Signed-off-by: Dave Jones <davej@fedoraproject.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-03 21:35:52 +00:00
depends on ARM || COMPILE_TEST
usb: gadget: move gadget API functions to udc-core instead of defining all functions as static inlines, let's move them to udc-core and export them with EXPORT_SYMBOL_GPL, that way we can make sure that only GPL drivers will use them. As a side effect, it'll be nicer to add tracepoints to the gadget API. While at that, also fix Kconfig dependencies to avoid randconfig build failures. Acked-By: Sebastian Reichel <sre@kernel.org> Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-05-31 10:07:47 +00:00
depends on NOP_USB_XCEIV
usb: phy: Add AM335x PHY driver This driver is a redo of my earlier attempt. It uses parts of the generic PHY driver and uses the new control driver for the register the phy needs to power on/off the phy. It also enables easy access for the wakeup register which is not yet implemented. The difference between the omap attempt is: - no static holding variable - one global visible function which exports a struct with callbacks to access the "control" registers. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-30 19:43:45 +00:00
select USB_PHY
select AM335X_CONTROL_USB
usb: phy: phy-am335x: bypass first VBUS sensing for host-only mode To prevent VBUS contention, the am335x MUSB phy senses VBUS first before transitioning to host mode. However, for host-only mode, VBUS could be directly tied to 5V power rail which could prevent MUSB transitions to host mode. This change receives dr_mode of the controller then bypass the first VBUS sensing for host-only mode, so that MUSB can work in host mode event if VBUS is tied to 5V. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-08 16:31:50 +00:00
select USB_COMMON
usb: phy: Add AM335x PHY driver This driver is a redo of my earlier attempt. It uses parts of the generic PHY driver and uses the new control driver for the register the phy needs to power on/off the phy. It also enables easy access for the wakeup register which is not yet implemented. The difference between the omap attempt is: - no static holding variable - one global visible function which exports a struct with callbacks to access the "control" registers. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-30 19:43:45 +00:00
help
This driver provides PHY support for that phy which part for the
AM335x SoC.
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 09:01:15 +00:00
config SAMSUNG_USBPHY
usb: phy: samsung: Select common driver part implicitly Since phy-samsung-usb library can be used only by phy-samsung-usb2 and phy-samsung-usb3 drivers, there is no need to give explicit control over its Kconfig symbol. This patch makes CONFIG_SAMSUNG_USBPHY symbol hidden and selected implicitly by CONFIG_SAMSUNG_USB2PHY and CONFIG_SAMSUNG_USB3PHY. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-16 09:57:06 +00:00
tristate
usb: phy: add a new driver for usb part of control module Added a new driver for the usb part of control module. This has an API to power on the USB2 phy and an API to write to the mailbox depending on whether MUSB has to act in host mode or in device mode. Writing to control module registers for doing the above task which was previously done in omap glue and in omap-usb2 phy will be removed. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-25 10:23:57 +00:00
help
usb: phy: samsung: Common out the generic stuff Moving register and structure definitions to header file, and keeping the generic functions to be used across multiple PHYs in common phy helper driver under SAMSUNG_USBPHY, and moving USB 2.0 PHY driver under SAMSUNG_USB2PHY. Also allowing samsung PHY drivers be built as modules. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-14 10:29:10 +00:00
Enable this to support Samsung USB phy helper driver for Samsung SoCs.
This driver provides common interface to interact, for Samsung USB 2.0 PHY
driver and later for Samsung USB 3.0 PHY driver.
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 09:01:15 +00:00
config TWL6030_USB
tristate "TWL6030 USB Transceiver Driver"
depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
help
Enable this to support the USB OTG transceiver on TWL6030
family chips. This TWL6030 transceiver has the VBUS and ID GND
and OTG SRP events capabilities. For all other transceiver functionality
UTMI PHY is embedded in OMAP4430. The internal PHY configurations APIs
are hooked to this driver through platform_data structure.
The definition of internal PHY APIs are in the mach-omap2 layer.
config USB_GPIO_VBUS
tristate "GPIO based peripheral-only VBUS sensing 'transceiver'"
usb: phy: Allow compile test of GPIO consumers if !GPIOLIB The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: <linux-usb@vger.kernel.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-05 16:32:38 +00:00
depends on GPIOLIB || COMPILE_TEST
usb: gadget: move gadget API functions to udc-core instead of defining all functions as static inlines, let's move them to udc-core and export them with EXPORT_SYMBOL_GPL, that way we can make sure that only GPL drivers will use them. As a side effect, it'll be nicer to add tracepoints to the gadget API. While at that, also fix Kconfig dependencies to avoid randconfig build failures. Acked-By: Sebastian Reichel <sre@kernel.org> Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-05-31 10:07:47 +00:00
depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 09:51:41 +00:00
select USB_PHY
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 09:01:15 +00:00
help
Provides simple GPIO VBUS sensing for controllers with an
internal transceiver via the usb_phy interface, and
optionally control of a D+ pullup GPIO as well as a VBUS
current limit regulator.
usb: phy: add a new driver for usb part of control module Added a new driver for the usb part of control module. This has an API to power on the USB2 phy and an API to write to the mailbox depending on whether MUSB has to act in host mode or in device mode. Writing to control module registers for doing the above task which was previously done in omap glue and in omap-usb2 phy will be removed. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-25 10:23:57 +00:00
usb: omap1: OTG controller driver Transceivers need to manage OTG controller state on OMAP1 to enable switching between peripheral and host modes. Provide a driver for that. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-06 14:13:06 +00:00
config OMAP_OTG
tristate "OMAP USB OTG controller driver"
depends on ARCH_OMAP_OTG && EXTCON
help
Enable this to support some transceivers on OMAP1 platforms. OTG
controller is needed to switch between host and peripheral modes.
This driver can also be built as a module. If so, the module
usb: phy: fix some Kconfig descriptions Some module names are not up to date in Kconfig help texts. Fix that. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-21 18:37:38 +00:00
will be called phy-omap-otg.
usb: omap1: OTG controller driver Transceivers need to manage OTG controller state on OMAP1 to enable switching between peripheral and host modes. Provide a driver for that. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-06 14:13:06 +00:00
usb: omap1: Tahvo USB transceiver driver Add Tahvo USB transceiver driver. Based on old code from linux-omap tree. The original driver was written by Juha Yrjölä, Tony Lindgren, and Timo Teräs. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-06 14:13:07 +00:00
config TAHVO_USB
tristate "Tahvo USB transceiver driver"
depends on MFD_RETU && EXTCON
usb: gadget: move gadget API functions to udc-core instead of defining all functions as static inlines, let's move them to udc-core and export them with EXPORT_SYMBOL_GPL, that way we can make sure that only GPL drivers will use them. As a side effect, it'll be nicer to add tracepoints to the gadget API. While at that, also fix Kconfig dependencies to avoid randconfig build failures. Acked-By: Sebastian Reichel <sre@kernel.org> Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-05-31 10:07:47 +00:00
depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
usb: omap1: Tahvo USB transceiver driver Add Tahvo USB transceiver driver. Based on old code from linux-omap tree. The original driver was written by Juha Yrjölä, Tony Lindgren, and Timo Teräs. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-06 14:13:07 +00:00
select USB_PHY
help
Enable this to support USB transceiver on Tahvo. This is used
at least on Nokia 770.
config TAHVO_USB_HOST_BY_DEFAULT
depends on TAHVO_USB
kconfig: use bool instead of boolean for type definition attributes Support for keyword 'boolean' will be dropped later on. No functional change. Reference: http://lkml.kernel.org/r/cover.1418003065.git.cj@linux.com Signed-off-by: Christoph Jaeger <cj@linux.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-12-20 20:41:11 +00:00
bool "Device in USB host mode by default"
usb: omap1: Tahvo USB transceiver driver Add Tahvo USB transceiver driver. Based on old code from linux-omap tree. The original driver was written by Juha Yrjölä, Tony Lindgren, and Timo Teräs. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-06 14:13:07 +00:00
help
Say Y here, if you want the device to enter USB host mode
by default on bootup.
USB: Add driver for NXP ISP1301 USB transceiver This new driver registers the NXP ISP1301 chip via the I2C subsystem. The chip is the USB transceiver shared by ohci-nxp, lpc32xx_udc (gadget) and isp1301_omap. ISP1301 is a very low-level driver that primarily separates out the I2C client registration of the ISP1301 chip (including instantiation via DT), used by other drivers, and declares the chip's registers. It's only a helper driver for some OHCI and USB device drivers. The driver can be considered as a register set extension of ohci-nxp, lpc32xx-udc and isp1301_omap, which in turn know best what to do with the low level functionality (individual ISP1301 registers and timing, see the different initialization strategies in those drivers). Those drivers previously internally duplicated ISP1301 register definitions which is solved by this new isp1301 driver. The ISP1301 registers exposed via isp1301.h can be accessed by other drivers using it with standard i2c_smbus_*() accesses. Following patches let the respective USB host and gadget drivers use this driver, instead of duplicating ISP1301 handling. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 14:47:04 +00:00
config USB_ISP1301
tristate "NXP ISP1301 USB transceiver support"
usb: phy: Fix Kconfig dependency for Phy drivers USB phy layer driver are only built if usb host is selected, but they are used too by USB_GADGET drivers Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-26 14:56:48 +00:00
depends on USB || USB_GADGET
USB: Add driver for NXP ISP1301 USB transceiver This new driver registers the NXP ISP1301 chip via the I2C subsystem. The chip is the USB transceiver shared by ohci-nxp, lpc32xx_udc (gadget) and isp1301_omap. ISP1301 is a very low-level driver that primarily separates out the I2C client registration of the ISP1301 chip (including instantiation via DT), used by other drivers, and declares the chip's registers. It's only a helper driver for some OHCI and USB device drivers. The driver can be considered as a register set extension of ohci-nxp, lpc32xx-udc and isp1301_omap, which in turn know best what to do with the low level functionality (individual ISP1301 registers and timing, see the different initialization strategies in those drivers). Those drivers previously internally duplicated ISP1301 register definitions which is solved by this new isp1301 driver. The ISP1301 registers exposed via isp1301.h can be accessed by other drivers using it with standard i2c_smbus_*() accesses. Following patches let the respective USB host and gadget drivers use this driver, instead of duplicating ISP1301 handling. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 14:47:04 +00:00
depends on I2C
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 09:51:41 +00:00
select USB_PHY
USB: Add driver for NXP ISP1301 USB transceiver This new driver registers the NXP ISP1301 chip via the I2C subsystem. The chip is the USB transceiver shared by ohci-nxp, lpc32xx_udc (gadget) and isp1301_omap. ISP1301 is a very low-level driver that primarily separates out the I2C client registration of the ISP1301 chip (including instantiation via DT), used by other drivers, and declares the chip's registers. It's only a helper driver for some OHCI and USB device drivers. The driver can be considered as a register set extension of ohci-nxp, lpc32xx-udc and isp1301_omap, which in turn know best what to do with the low level functionality (individual ISP1301 registers and timing, see the different initialization strategies in those drivers). Those drivers previously internally duplicated ISP1301 register definitions which is solved by this new isp1301 driver. The ISP1301 registers exposed via isp1301.h can be accessed by other drivers using it with standard i2c_smbus_*() accesses. Following patches let the respective USB host and gadget drivers use this driver, instead of duplicating ISP1301 handling. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 14:47:04 +00:00
help
Say Y here to add support for the NXP ISP1301 USB transceiver driver.
This chip is typically used as USB transceiver for USB host, gadget
and OTG drivers (to be selected separately).
To compile this driver as a module, choose M here: the
usb: phy: fix some Kconfig descriptions Some module names are not up to date in Kconfig help texts. Fix that. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-21 18:37:38 +00:00
module will be called phy-isp1301.
usb: phy: mv_u3d: Add usb phy driver for mv_u3d The driver supports phy_init and phy_shutdown functions to enable and disable phy for Marvell USB 3.0 controller. Signed-off-by: Yu Xu <yuxu@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-09 14:29:31 +00:00
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 09:01:15 +00:00
config USB_MSM_OTG
usb: phy: msm: Make driver selectable on ARCH_QCOM Controller could be found on APQ and MSM platforms, make configuration description more generic. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-28 13:34:04 +00:00
tristate "Qualcomm on-chip USB OTG controller support"
usb: phy: msm: Remove dead code This code is no longer used now that mach-msm has been removed. Delete it. Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-13 18:09:42 +00:00
depends on (USB || USB_GADGET) && (ARCH_QCOM || COMPILE_TEST)
usb: gadget: move gadget API functions to udc-core instead of defining all functions as static inlines, let's move them to udc-core and export them with EXPORT_SYMBOL_GPL, that way we can make sure that only GPL drivers will use them. As a side effect, it'll be nicer to add tracepoints to the gadget API. While at that, also fix Kconfig dependencies to avoid randconfig build failures. Acked-By: Sebastian Reichel <sre@kernel.org> Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-05-31 10:07:47 +00:00
depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
usb: phy: msm: reset controller is mandatory now Commit a27345434134 "usb: phy: msm: Use reset framework for LINK and PHY resets" introduced a mandatory call to reset_control_get into the msm usb phy driver, which means we have to add a Kconfig dependency on the API to avoid this build error: phy/phy-msm-usb.c: In function 'msm_otg_read_dt': phy/phy-msm-usb.c:1461:2: error: implicit declaration of function 'devm_reset_control_get' [-Werror=implicit-function-declaration] motg->link_rst = devm_reset_control_get(&pdev->dev, "link"); ^ Since the usb-ehci-msm driver currently selects the OTG driver, we could still get a broken dependency here. To solve that, this patch also removes the 'select', which turns out to be unnecessary. Reviewed-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-13 19:46:52 +00:00
depends on RESET_CONTROLLER
usb: phy: msm: Use extcon framework for VBUS and ID detection On recent Qualcomm platforms VBUS and ID lines are not routed to USB PHY LINK controller. Use extcon framework to receive connect and disconnect ID and VBUS notification. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-09 08:34:22 +00:00
depends on EXTCON
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 09:51:41 +00:00
select USB_PHY
usb: phy: mv_u3d: Add usb phy driver for mv_u3d The driver supports phy_init and phy_shutdown functions to enable and disable phy for Marvell USB 3.0 controller. Signed-off-by: Yu Xu <yuxu@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-09 14:29:31 +00:00
help
usb: phy: msm: Make driver selectable on ARCH_QCOM Controller could be found on APQ and MSM platforms, make configuration description more generic. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-28 13:34:04 +00:00
Enable this to support the USB OTG transceiver on Qualcomm chips. It
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 09:01:15 +00:00
handles PHY initialization, clock management, and workarounds
required after resetting the hardware and power management.
This driver is required even for peripheral only or host only
mode configurations.
This driver is not supported on boards like trout which
has an external PHY.
usb: phy: qcom: New APQ8016/MSM8916 USB transceiver driver Driver handles PHY initialization, clock management, power management and workarounds required after resetting the hardware. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-08 14:57:40 +00:00
config USB_QCOM_8X16_PHY
tristate "Qualcomm APQ8016/MSM8916 on-chip USB PHY controller support"
depends on ARCH_QCOM || COMPILE_TEST
usb: phy: fix phy-qcom-8x16-usb build Fix build errors that happen when USB_QCOM_8X16_PHY=y and EXTCON=m: drivers/built-in.o: In function `phy_8x16_init': phy-qcom-8x16-usb.c:(.text+0x86ef4): undefined reference to `extcon_get_cable_state' drivers/built-in.o: In function `phy_8x16_probe': phy-qcom-8x16-usb.c:(.text+0x870bf): undefined reference to `extcon_get_edev_by_phandle' phy-qcom-8x16-usb.c:(.text+0x87133): undefined reference to `extcon_register_interest' phy-qcom-8x16-usb.c:(.text+0x87151): undefined reference to `extcon_unregister_interest' drivers/built-in.o: In function `phy_8x16_remove': phy-qcom-8x16-usb.c:(.text+0x872ec): undefined reference to `extcon_unregister_interest' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-10 17:37:39 +00:00
depends on RESET_CONTROLLER && EXTCON
usb: phy: qcom: New APQ8016/MSM8916 USB transceiver driver Driver handles PHY initialization, clock management, power management and workarounds required after resetting the hardware. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-08 14:57:40 +00:00
select USB_PHY
select USB_ULPI_VIEWPORT
help
Enable this to support the USB transceiver on Qualcomm 8x16 chipsets.
It handles PHY initialization, clock management, power management,
and workarounds required after resetting the hardware.
To compile this driver as a module, choose M here: the
module will be called phy-qcom-8x16-usb.
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 09:01:15 +00:00
config USB_MV_OTG
tristate "Marvell USB OTG support"
usb: kconfig: fix warning of select USB_OTG When choose randconfig for kernel build, it reports below warning: "warning: (USB_OTG_FSM && FSL_USB2_OTG && USB_MV_OTG) selects USB_OTG which has unmet direct dependencies (USB_SUPPORT && USB && PM)" In fact, USB_OTG is visible symbol and depends on PM, so the driver needs to depend on it to reduce dependency problem. Signed-off-by: Peter Chen <peter.chen@freescale.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-19 03:47:47 +00:00
depends on USB_EHCI_MV && USB_MV_UDC && PM && USB_OTG
usb: gadget: move gadget API functions to udc-core instead of defining all functions as static inlines, let's move them to udc-core and export them with EXPORT_SYMBOL_GPL, that way we can make sure that only GPL drivers will use them. As a side effect, it'll be nicer to add tracepoints to the gadget API. While at that, also fix Kconfig dependencies to avoid randconfig build failures. Acked-By: Sebastian Reichel <sre@kernel.org> Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-05-31 10:07:47 +00:00
depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 09:51:41 +00:00
select USB_PHY
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 09:01:15 +00:00
help
Say Y here if you want to build Marvell USB OTG transciever
driver in kernel (including PXA and MMP series). This driver
implements role switch between EHCI host driver and gadget driver.
To compile this driver as a module, choose M here.
config USB_MXS_PHY
tristate "Freescale MXS USB PHY support"
depends on ARCH_MXC || ARCH_MXS
select STMP_DEVICE
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 09:51:41 +00:00
select USB_PHY
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 09:01:15 +00:00
help
Enable this to support the Freescale MXS USB PHY.
MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
usb: phy: add R-Car USB phy driver This patch adds Renesas R-Car USB phy driver. It supports R8A7779 chip at this point. R-Car has some USB controllers, but has only one phy-initializer. So, this driver is counting users. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-11-01 02:03:11 +00:00
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 09:01:15 +00:00
config USB_ULPI
bool "Generic ULPI Transceiver Driver"
phy: Enable USB PHY support for arm64 Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-14 19:17:30 +00:00
depends on ARM || ARM64
usb: phy: Fix USB_ULPI_VIEWPORT Kconfig dependency USB_ULPI_VIEWPORT didn't depend on USB_ULPI, while USB_ULPI is using non user selectable USB_ULPI_VIEWPORT. Fix this. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-21 13:25:52 +00:00
select USB_ULPI_VIEWPORT
usb: phy: samsung: Introducing usb phy driver for hsotg This driver uses usb_phy interface to interact with s3c-hsotg. Supports phy_init and phy_shutdown functions to enable/disable usb phy. Support will be extended to host controllers and more Samsung SoCs. Signed-off-by: Praveen Paneri <p.paneri@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-11-23 10:33:06 +00:00
help
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 09:01:15 +00:00
Enable this to support ULPI connected USB OTG transceivers which
are likely found on embedded boards.
config USB_ULPI_VIEWPORT
bool
usb: phy: samsung: Introducing usb phy driver for hsotg This driver uses usb_phy interface to interact with s3c-hsotg. Supports phy_init and phy_shutdown functions to enable/disable usb phy. Support will be extended to host controllers and more Samsung SoCs. Signed-off-by: Praveen Paneri <p.paneri@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-11-23 10:33:06 +00:00
help
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 09:01:15 +00:00
Provides read/write operations to the ULPI phy register set for
controllers with a viewport register (e.g. Chipidea/ARC controllers).
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 09:51:41 +00:00
endmenu
Reference in New Issue Copy Permalink