linux/arch/powerpc/platforms/44x/Makefile

obj-$(CONFIG_44x)	+= misc_44x.o
ifneq ($(CONFIG_PPC4xx_CPM),y)
obj-$(CONFIG_44x)	+= idle.o
endif
obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o
obj-$(CONFIG_EBONY)	+= ebony.o
obj-$(CONFIG_SAM440EP) 	+= sam440ep.o
obj-$(CONFIG_WARP)	+= warp.o
obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o
obj-$(CONFIG_ISS4xx)	+= iss4xx.o
obj-$(CONFIG_CANYONLANDS)+= canyonlands.o
obj-$(CONFIG_CURRITUCK)	+= ppc476.o
obj-$(CONFIG_AKEBONO)	+= ppc476.o
powerpc/4xx: Add suspend and idle support Add suspend/resume support for 4xx compatible CPUs. See /sys/power/state for available power states configured in. Add two different idle states (idle-wait and idle-doze) controlled via sysfs. Default is idle-wait. cat /sys/devices/system/cpu/cpu0/idle [wait] doze To save additional power, use idle-doze. echo doze > /sys/devices/system/cpu/cpu0/idle cat /sys/devices/system/cpu/cpu0/idle wait [doze] Signed-off-by: Victor Gallardo <vgallardo@apm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> 2010-10-08 10:25:27 +00:00			`obj-$(CONFIG_44x) += misc_44x.o`
			`ifneq ($(CONFIG_PPC4xx_CPM),y)`
			`obj-$(CONFIG_44x) += idle.o`
			`endif`
powerpc/44x: Add PowerPC 44x simple platform support This adds a common board file for almost all of the "simple" PowerPC 44x boards that exist today. This is intended to be a single place to add support for boards that do not differ in platform support from most of the evaluation boards that are used as reference platforms. Boards that have specific requirements or custom hardware setup should still have their own board.c file. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> 2008-08-19 15:25:15 +00:00			`obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o`
[POWERPC] Support for the Ebony 440GP reference board in arch/powerpc This adds platform support code for the Ebony (440GP) evaluation board. This includes both code in arch/powerpc/platforms/44x for board initialization, and zImage wrapper code to correctly tweak the flattened device tree based on information from the firmware. The zImage supports both IBM OpenBIOS (aka "treeboot") and old versions of uboot which don't support a flattened device tree. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> 2007-05-08 04:10:01 +00:00			`obj-$(CONFIG_EBONY) += ebony.o`
powerpc/4xx: Sam440ep support The Sam440ep is an high customizable general purpose mini-itx board, based on the AMCC 440EP and with a LatticeXP FPGA onboard. It's poduced by ACube Systems Srl (Bassano del Grappa, Italy), http://www.acube-systems.biz. Signed-off-by: Giuseppe Coviello <gicoviello@gmail.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> 2008-05-19 15:20:47 +00:00			`obj-$(CONFIG_SAM440EP) += sam440ep.o`
[POWERPC] 4xx: PIKA Warp base platform Add the base platform support for the PIKA Warp boards. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> 2008-01-21 17:55:29 +00:00			`obj-$(CONFIG_WARP) += warp.o`
powerpc/virtex: add Xilinx Virtex 5 ppc440 platform support Support for the Xilinx Virtex5 FXT 440 is being added. Signed-off-by: John Linn <john.linn@xilinx.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> 2008-07-03 14:05:04 +00:00			`obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o`
powerpc/virtex: Add Xilinx ML510 reference design support Signed-off-by: Roderick Colenbrander <thunderbird2k@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> 2009-06-06 16:15:24 +00:00			`obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o`
powerpc/4xx: Simple platform for the ISS 4xx simulator This is a trivial 4xx plaform that uses the new simple bsp from Josh and is handy to use in simulators such as ISS or even Mambo who don't properly implement most of the actual devices in the SoC but really only the core. Signed-off-by: Torez Smith <lnxtorez@linux.vnet.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> 2010-03-05 10:45:54 +00:00			`obj-$(CONFIG_ISS4xx) += iss4xx.o`
powerpc/44x: PHY fixup for USB on canyonlands board This fix is a reset for USB PHY that requires some amount of time for power to be stable on Canyonlands. Signed-off-by: Rupjyoti Sarmah <rsarmah@apm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> 2010-12-15 02:27:10 +00:00			`obj-$(CONFIG_CANYONLANDS)+= canyonlands.o`
IBM Currituck: Clean up board specific code before adding Akebono code The IBM Akebono code uses the same initialisation functions as the earlier Currituck board. Rather than create a copy of this code for Akebono we will instead integrate support for it into the same file as the Currituck code. This patch just renames the board support file and updates the Makefile. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 2014-03-06 03:52:26 +00:00			`obj-$(CONFIG_CURRITUCK) += ppc476.o`
IBM Akebono: Add the Akebono platform This patch adds support for the IBM Akebono board. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 2014-03-06 03:52:27 +00:00			`obj-$(CONFIG_AKEBONO) += ppc476.o`