2011-07-19 23:26:54 +00:00
|
|
|
/dts-v1/;
|
|
|
|
|
|
2013-12-02 13:09:57 +00:00
|
|
|
#include <dt-bindings/input/input.h>
|
2012-10-17 22:38:21 +00:00
|
|
|
#include "tegra20.dtsi"
|
2011-07-19 23:26:54 +00:00
|
|
|
|
|
|
|
|
/ {
|
2012-12-20 09:41:29 +00:00
|
|
|
model = "NVIDIA Tegra20 Harmony evaluation board";
|
2011-07-19 23:26:54 +00:00
|
|
|
compatible = "nvidia,harmony", "nvidia,tegra20";
|
|
|
|
|
|
2013-12-09 21:43:59 +00:00
|
|
|
aliases {
|
|
|
|
|
rtc0 = "/i2c@7000d000/tps6586x@34";
|
|
|
|
|
rtc1 = "/rtc@7000e000";
|
2014-11-11 20:49:30 +00:00
|
|
|
serial0 = &uartd;
|
2013-12-09 21:43:59 +00:00
|
|
|
};
|
|
|
|
|
|
2012-05-11 22:17:47 +00:00
|
|
|
memory {
|
2012-05-11 22:11:38 +00:00
|
|
|
reg = <0x00000000 0x40000000>;
|
2011-07-19 23:26:54 +00:00
|
|
|
};
|
|
|
|
|
|
2013-11-26 00:53:16 +00:00
|
|
|
host1x@50000000 {
|
2013-12-19 15:59:25 +00:00
|
|
|
dc@54200000 {
|
|
|
|
|
rgb {
|
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
|
|
nvidia,panel = <&panel>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
2013-11-26 00:53:16 +00:00
|
|
|
hdmi@54280000 {
|
2012-11-09 23:58:11 +00:00
|
|
|
status = "okay";
|
|
|
|
|
|
2014-04-25 15:44:48 +00:00
|
|
|
hdmi-supply = <&vdd_5v0_hdmi>;
|
2012-11-09 23:58:11 +00:00
|
|
|
vdd-supply = <&hdmi_vdd_reg>;
|
|
|
|
|
pll-supply = <&hdmi_pll_reg>;
|
|
|
|
|
|
|
|
|
|
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
|
2013-02-13 00:25:15 +00:00
|
|
|
nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
|
|
|
|
|
GPIO_ACTIVE_HIGH>;
|
2012-11-09 23:58:11 +00:00
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
2013-11-26 00:53:16 +00:00
|
|
|
pinmux@70000014 {
|
2012-03-15 22:27:36 +00:00
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&state_default>;
|
|
|
|
|
|
|
|
|
|
state_default: pinmux {
|
|
|
|
|
ata {
|
|
|
|
|
nvidia,pins = "ata";
|
|
|
|
|
nvidia,function = "ide";
|
|
|
|
|
};
|
|
|
|
|
atb {
|
|
|
|
|
nvidia,pins = "atb", "gma", "gme";
|
|
|
|
|
nvidia,function = "sdio4";
|
|
|
|
|
};
|
|
|
|
|
atc {
|
|
|
|
|
nvidia,pins = "atc";
|
|
|
|
|
nvidia,function = "nand";
|
|
|
|
|
};
|
|
|
|
|
atd {
|
|
|
|
|
nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu",
|
|
|
|
|
"spia", "spib", "spic";
|
|
|
|
|
nvidia,function = "gmi";
|
|
|
|
|
};
|
|
|
|
|
cdev1 {
|
|
|
|
|
nvidia,pins = "cdev1";
|
|
|
|
|
nvidia,function = "plla_out";
|
|
|
|
|
};
|
|
|
|
|
cdev2 {
|
|
|
|
|
nvidia,pins = "cdev2";
|
|
|
|
|
nvidia,function = "pllp_out4";
|
|
|
|
|
};
|
|
|
|
|
crtp {
|
|
|
|
|
nvidia,pins = "crtp";
|
|
|
|
|
nvidia,function = "crt";
|
|
|
|
|
};
|
|
|
|
|
csus {
|
|
|
|
|
nvidia,pins = "csus";
|
|
|
|
|
nvidia,function = "vi_sensor_clk";
|
|
|
|
|
};
|
|
|
|
|
dap1 {
|
|
|
|
|
nvidia,pins = "dap1";
|
|
|
|
|
nvidia,function = "dap1";
|
|
|
|
|
};
|
|
|
|
|
dap2 {
|
|
|
|
|
nvidia,pins = "dap2";
|
|
|
|
|
nvidia,function = "dap2";
|
|
|
|
|
};
|
|
|
|
|
dap3 {
|
|
|
|
|
nvidia,pins = "dap3";
|
|
|
|
|
nvidia,function = "dap3";
|
|
|
|
|
};
|
|
|
|
|
dap4 {
|
|
|
|
|
nvidia,pins = "dap4";
|
|
|
|
|
nvidia,function = "dap4";
|
|
|
|
|
};
|
|
|
|
|
ddc {
|
|
|
|
|
nvidia,pins = "ddc";
|
|
|
|
|
nvidia,function = "i2c2";
|
|
|
|
|
};
|
|
|
|
|
dta {
|
|
|
|
|
nvidia,pins = "dta", "dtd";
|
|
|
|
|
nvidia,function = "sdio2";
|
|
|
|
|
};
|
|
|
|
|
dtb {
|
|
|
|
|
nvidia,pins = "dtb", "dtc", "dte";
|
|
|
|
|
nvidia,function = "rsvd1";
|
|
|
|
|
};
|
|
|
|
|
dtf {
|
|
|
|
|
nvidia,pins = "dtf";
|
|
|
|
|
nvidia,function = "i2c3";
|
|
|
|
|
};
|
|
|
|
|
gmc {
|
|
|
|
|
nvidia,pins = "gmc";
|
|
|
|
|
nvidia,function = "uartd";
|
|
|
|
|
};
|
|
|
|
|
gpu7 {
|
|
|
|
|
nvidia,pins = "gpu7";
|
|
|
|
|
nvidia,function = "rtck";
|
|
|
|
|
};
|
|
|
|
|
gpv {
|
|
|
|
|
nvidia,pins = "gpv", "slxa", "slxk";
|
|
|
|
|
nvidia,function = "pcie";
|
|
|
|
|
};
|
|
|
|
|
hdint {
|
|
|
|
|
nvidia,pins = "hdint", "pta";
|
|
|
|
|
nvidia,function = "hdmi";
|
|
|
|
|
};
|
|
|
|
|
i2cp {
|
|
|
|
|
nvidia,pins = "i2cp";
|
|
|
|
|
nvidia,function = "i2cp";
|
|
|
|
|
};
|
|
|
|
|
irrx {
|
|
|
|
|
nvidia,pins = "irrx", "irtx";
|
|
|
|
|
nvidia,function = "uarta";
|
|
|
|
|
};
|
|
|
|
|
kbca {
|
|
|
|
|
nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
|
|
|
|
|
"kbce", "kbcf";
|
|
|
|
|
nvidia,function = "kbc";
|
|
|
|
|
};
|
|
|
|
|
lcsn {
|
|
|
|
|
nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
|
|
|
|
|
"ld3", "ld4", "ld5", "ld6", "ld7",
|
|
|
|
|
"ld8", "ld9", "ld10", "ld11", "ld12",
|
|
|
|
|
"ld13", "ld14", "ld15", "ld16", "ld17",
|
|
|
|
|
"ldc", "ldi", "lhp0", "lhp1", "lhp2",
|
|
|
|
|
"lhs", "lm0", "lm1", "lpp", "lpw0",
|
|
|
|
|
"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
|
|
|
|
|
"lsda", "lsdi", "lspi", "lvp0", "lvp1",
|
|
|
|
|
"lvs";
|
|
|
|
|
nvidia,function = "displaya";
|
|
|
|
|
};
|
|
|
|
|
owc {
|
|
|
|
|
nvidia,pins = "owc", "spdi", "spdo", "uac";
|
|
|
|
|
nvidia,function = "rsvd2";
|
|
|
|
|
};
|
|
|
|
|
pmc {
|
|
|
|
|
nvidia,pins = "pmc";
|
|
|
|
|
nvidia,function = "pwr_on";
|
|
|
|
|
};
|
|
|
|
|
rm {
|
|
|
|
|
nvidia,pins = "rm";
|
|
|
|
|
nvidia,function = "i2c1";
|
|
|
|
|
};
|
|
|
|
|
sdb {
|
|
|
|
|
nvidia,pins = "sdb", "sdc", "sdd";
|
|
|
|
|
nvidia,function = "pwm";
|
|
|
|
|
};
|
|
|
|
|
sdio1 {
|
|
|
|
|
nvidia,pins = "sdio1";
|
|
|
|
|
nvidia,function = "sdio1";
|
|
|
|
|
};
|
|
|
|
|
slxc {
|
|
|
|
|
nvidia,pins = "slxc", "slxd";
|
|
|
|
|
nvidia,function = "spdif";
|
|
|
|
|
};
|
|
|
|
|
spid {
|
|
|
|
|
nvidia,pins = "spid", "spie", "spif";
|
|
|
|
|
nvidia,function = "spi1";
|
|
|
|
|
};
|
|
|
|
|
spig {
|
|
|
|
|
nvidia,pins = "spig", "spih";
|
|
|
|
|
nvidia,function = "spi2_alt";
|
|
|
|
|
};
|
|
|
|
|
uaa {
|
|
|
|
|
nvidia,pins = "uaa", "uab", "uda";
|
|
|
|
|
nvidia,function = "ulpi";
|
|
|
|
|
};
|
|
|
|
|
uad {
|
|
|
|
|
nvidia,pins = "uad";
|
|
|
|
|
nvidia,function = "irda";
|
|
|
|
|
};
|
|
|
|
|
uca {
|
|
|
|
|
nvidia,pins = "uca", "ucb";
|
|
|
|
|
nvidia,function = "uartc";
|
|
|
|
|
};
|
|
|
|
|
conf_ata {
|
|
|
|
|
nvidia,pins = "ata", "atb", "atc", "atd", "ate",
|
2012-04-13 22:35:20 +00:00
|
|
|
"cdev1", "cdev2", "dap1", "dtb", "gma",
|
|
|
|
|
"gmb", "gmc", "gmd", "gme", "gpu7",
|
|
|
|
|
"gpv", "i2cp", "pta", "rm", "slxa",
|
|
|
|
|
"slxk", "spia", "spib", "uac";
|
2013-12-05 10:44:08 +00:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
2012-03-15 22:27:36 +00:00
|
|
|
};
|
|
|
|
|
conf_ck32 {
|
|
|
|
|
nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
|
|
|
|
|
"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
|
2013-12-05 10:44:08 +00:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
2012-03-15 22:27:36 +00:00
|
|
|
};
|
2012-04-13 22:35:20 +00:00
|
|
|
conf_csus {
|
|
|
|
|
nvidia,pins = "csus", "spid", "spif";
|
2013-12-05 10:44:08 +00:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
2012-04-13 22:35:20 +00:00
|
|
|
};
|
2012-03-15 22:27:36 +00:00
|
|
|
conf_crtp {
|
|
|
|
|
nvidia,pins = "crtp", "dap2", "dap3", "dap4",
|
|
|
|
|
"dtc", "dte", "dtf", "gpu", "sdio1",
|
|
|
|
|
"slxc", "slxd", "spdi", "spdo", "spig",
|
2012-04-13 22:35:20 +00:00
|
|
|
"uda";
|
2013-12-05 10:44:08 +00:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
2012-03-15 22:27:36 +00:00
|
|
|
};
|
|
|
|
|
conf_ddc {
|
|
|
|
|
nvidia,pins = "ddc", "dta", "dtd", "kbca",
|
|
|
|
|
"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
|
|
|
|
|
"sdc";
|
2013-12-05 10:44:08 +00:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
2012-03-15 22:27:36 +00:00
|
|
|
};
|
|
|
|
|
conf_hdint {
|
|
|
|
|
nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
|
|
|
|
|
"lpw1", "lsc1", "lsck", "lsda", "lsdi",
|
|
|
|
|
"lvp0", "owc", "sdb";
|
2013-12-05 10:44:08 +00:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
2012-03-15 22:27:36 +00:00
|
|
|
};
|
|
|
|
|
conf_irrx {
|
|
|
|
|
nvidia,pins = "irrx", "irtx", "sdd", "spic",
|
|
|
|
|
"spie", "spih", "uaa", "uab", "uad",
|
|
|
|
|
"uca", "ucb";
|
2013-12-05 10:44:08 +00:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
2012-03-15 22:27:36 +00:00
|
|
|
};
|
|
|
|
|
conf_lc {
|
|
|
|
|
nvidia,pins = "lc", "ls";
|
2013-12-05 10:44:08 +00:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
2012-03-15 22:27:36 +00:00
|
|
|
};
|
|
|
|
|
conf_ld0 {
|
|
|
|
|
nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
|
|
|
|
|
"ld5", "ld6", "ld7", "ld8", "ld9",
|
|
|
|
|
"ld10", "ld11", "ld12", "ld13", "ld14",
|
|
|
|
|
"ld15", "ld16", "ld17", "ldi", "lhp0",
|
|
|
|
|
"lhp1", "lhp2", "lhs", "lm0", "lpp",
|
|
|
|
|
"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
|
|
|
|
|
"lvs", "pmc";
|
2013-12-05 10:44:08 +00:00
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
2012-03-15 22:27:36 +00:00
|
|
|
};
|
|
|
|
|
conf_ld17_0 {
|
|
|
|
|
nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
|
|
|
|
|
"ld23_22";
|
2013-12-05 10:44:08 +00:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
2012-03-15 22:27:36 +00:00
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
2012-05-11 23:32:56 +00:00
|
|
|
i2s@70002800 {
|
|
|
|
|
status = "okay";
|
2012-05-11 23:03:26 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
serial@70006300 {
|
2012-05-11 23:32:56 +00:00
|
|
|
status = "okay";
|
2012-05-11 23:03:26 +00:00
|
|
|
};
|
|
|
|
|
|
2013-12-19 15:59:25 +00:00
|
|
|
pwm: pwm@7000a000 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
2011-07-19 23:26:54 +00:00
|
|
|
i2c@7000c000 {
|
2012-05-11 23:32:56 +00:00
|
|
|
status = "okay";
|
2011-07-19 23:26:54 +00:00
|
|
|
clock-frequency = <400000>;
|
|
|
|
|
|
2012-01-11 23:09:57 +00:00
|
|
|
wm8903: wm8903@1a {
|
2011-07-19 23:26:54 +00:00
|
|
|
compatible = "wlf,wm8903";
|
|
|
|
|
reg = <0x1a>;
|
2012-01-11 23:09:57 +00:00
|
|
|
interrupt-parent = <&gpio>;
|
2013-02-13 19:51:51 +00:00
|
|
|
interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
|
2011-07-19 23:26:54 +00:00
|
|
|
|
|
|
|
|
gpio-controller;
|
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
|
|
2012-01-11 23:09:57 +00:00
|
|
|
micdet-cfg = <0>;
|
|
|
|
|
micdet-delay = <100>;
|
2012-05-11 22:11:38 +00:00
|
|
|
gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
|
2011-07-19 23:26:54 +00:00
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
2012-11-09 23:58:11 +00:00
|
|
|
hdmi_ddc: i2c@7000c400 {
|
2012-05-11 23:32:56 +00:00
|
|
|
status = "okay";
|
2012-11-09 23:58:11 +00:00
|
|
|
clock-frequency = <100000>;
|
2011-07-19 23:26:54 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
i2c@7000c500 {
|
2012-05-11 23:32:56 +00:00
|
|
|
status = "okay";
|
2011-07-19 23:26:54 +00:00
|
|
|
clock-frequency = <400000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
i2c@7000d000 {
|
2012-05-11 23:32:56 +00:00
|
|
|
status = "okay";
|
2011-07-19 23:26:54 +00:00
|
|
|
clock-frequency = <400000>;
|
ARM: dt: tegra: harmony: add regulators
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.
swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
this GPIO for now. This will be fixed when the PCIe driver is re-
written as a driver. The code can't regulator_get("vdd_1v05") right
now, because the vdd_1v05 regulator's probe gets deferred due to its
supply being the PMIC, which gets probed after the regulator the first
time around, and this dependency is only resolved by repeated probing,
which happens when deferred_probe_initcall() is called, which happens
in a late initcall, whose runtime order relative to harmony_pcie_init()
is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 20:59:59 +00:00
|
|
|
|
|
|
|
|
pmic: tps6586x@34 {
|
|
|
|
|
compatible = "ti,tps6586x";
|
|
|
|
|
reg = <0x34>;
|
2013-02-13 19:51:51 +00:00
|
|
|
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
ARM: dt: tegra: harmony: add regulators
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.
swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
this GPIO for now. This will be fixed when the PCIe driver is re-
written as a driver. The code can't regulator_get("vdd_1v05") right
now, because the vdd_1v05 regulator's probe gets deferred due to its
supply being the PMIC, which gets probed after the regulator the first
time around, and this dependency is only resolved by repeated probing,
which happens when deferred_probe_initcall() is called, which happens
in a late initcall, whose runtime order relative to harmony_pcie_init()
is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 20:59:59 +00:00
|
|
|
|
2012-09-11 17:40:04 +00:00
|
|
|
ti,system-power-controller;
|
|
|
|
|
|
ARM: dt: tegra: harmony: add regulators
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.
swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
this GPIO for now. This will be fixed when the PCIe driver is re-
written as a driver. The code can't regulator_get("vdd_1v05") right
now, because the vdd_1v05 regulator's probe gets deferred due to its
supply being the PMIC, which gets probed after the regulator the first
time around, and this dependency is only resolved by repeated probing,
which happens when deferred_probe_initcall() is called, which happens
in a late initcall, whose runtime order relative to harmony_pcie_init()
is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 20:59:59 +00:00
|
|
|
#gpio-cells = <2>;
|
|
|
|
|
gpio-controller;
|
|
|
|
|
|
|
|
|
|
sys-supply = <&vdd_5v0_reg>;
|
|
|
|
|
vin-sm0-supply = <&sys_reg>;
|
|
|
|
|
vin-sm1-supply = <&sys_reg>;
|
|
|
|
|
vin-sm2-supply = <&sys_reg>;
|
|
|
|
|
vinldo01-supply = <&sm2_reg>;
|
|
|
|
|
vinldo23-supply = <&sm2_reg>;
|
|
|
|
|
vinldo4-supply = <&sm2_reg>;
|
|
|
|
|
vinldo678-supply = <&sm2_reg>;
|
|
|
|
|
vinldo9-supply = <&sm2_reg>;
|
|
|
|
|
|
|
|
|
|
regulators {
|
2012-09-20 23:04:06 +00:00
|
|
|
sys_reg: sys {
|
ARM: dt: tegra: harmony: add regulators
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.
swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
this GPIO for now. This will be fixed when the PCIe driver is re-
written as a driver. The code can't regulator_get("vdd_1v05") right
now, because the vdd_1v05 regulator's probe gets deferred due to its
supply being the PMIC, which gets probed after the regulator the first
time around, and this dependency is only resolved by repeated probing,
which happens when deferred_probe_initcall() is called, which happens
in a late initcall, whose runtime order relative to harmony_pcie_init()
is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 20:59:59 +00:00
|
|
|
regulator-name = "vdd_sys";
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
|
|
|
|
|
2012-09-20 23:04:06 +00:00
|
|
|
sm0 {
|
ARM: dt: tegra: harmony: add regulators
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.
swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
this GPIO for now. This will be fixed when the PCIe driver is re-
written as a driver. The code can't regulator_get("vdd_1v05") right
now, because the vdd_1v05 regulator's probe gets deferred due to its
supply being the PMIC, which gets probed after the regulator the first
time around, and this dependency is only resolved by repeated probing,
which happens when deferred_probe_initcall() is called, which happens
in a late initcall, whose runtime order relative to harmony_pcie_init()
is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 20:59:59 +00:00
|
|
|
regulator-name = "vdd_sm0,vdd_core";
|
|
|
|
|
regulator-min-microvolt = <1200000>;
|
|
|
|
|
regulator-max-microvolt = <1200000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
|
|
|
|
|
2012-09-20 23:04:06 +00:00
|
|
|
sm1 {
|
ARM: dt: tegra: harmony: add regulators
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.
swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
this GPIO for now. This will be fixed when the PCIe driver is re-
written as a driver. The code can't regulator_get("vdd_1v05") right
now, because the vdd_1v05 regulator's probe gets deferred due to its
supply being the PMIC, which gets probed after the regulator the first
time around, and this dependency is only resolved by repeated probing,
which happens when deferred_probe_initcall() is called, which happens
in a late initcall, whose runtime order relative to harmony_pcie_init()
is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 20:59:59 +00:00
|
|
|
regulator-name = "vdd_sm1,vdd_cpu";
|
|
|
|
|
regulator-min-microvolt = <1000000>;
|
|
|
|
|
regulator-max-microvolt = <1000000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
|
|
|
|
|
2012-09-20 23:04:06 +00:00
|
|
|
sm2_reg: sm2 {
|
ARM: dt: tegra: harmony: add regulators
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.
swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
this GPIO for now. This will be fixed when the PCIe driver is re-
written as a driver. The code can't regulator_get("vdd_1v05") right
now, because the vdd_1v05 regulator's probe gets deferred due to its
supply being the PMIC, which gets probed after the regulator the first
time around, and this dependency is only resolved by repeated probing,
which happens when deferred_probe_initcall() is called, which happens
in a late initcall, whose runtime order relative to harmony_pcie_init()
is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 20:59:59 +00:00
|
|
|
regulator-name = "vdd_sm2,vin_ldo*";
|
|
|
|
|
regulator-min-microvolt = <3700000>;
|
|
|
|
|
regulator-max-microvolt = <3700000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
|
|
|
|
|
2013-08-09 14:49:22 +00:00
|
|
|
pci_clk_reg: ldo0 {
|
ARM: dt: tegra: harmony: add regulators
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.
swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
this GPIO for now. This will be fixed when the PCIe driver is re-
written as a driver. The code can't regulator_get("vdd_1v05") right
now, because the vdd_1v05 regulator's probe gets deferred due to its
supply being the PMIC, which gets probed after the regulator the first
time around, and this dependency is only resolved by repeated probing,
which happens when deferred_probe_initcall() is called, which happens
in a late initcall, whose runtime order relative to harmony_pcie_init()
is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 20:59:59 +00:00
|
|
|
regulator-name = "vdd_ldo0,vddio_pex_clk";
|
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
|
};
|
|
|
|
|
|
2012-09-20 23:04:06 +00:00
|
|
|
ldo1 {
|
ARM: dt: tegra: harmony: add regulators
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.
swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
this GPIO for now. This will be fixed when the PCIe driver is re-
written as a driver. The code can't regulator_get("vdd_1v05") right
now, because the vdd_1v05 regulator's probe gets deferred due to its
supply being the PMIC, which gets probed after the regulator the first
time around, and this dependency is only resolved by repeated probing,
which happens when deferred_probe_initcall() is called, which happens
in a late initcall, whose runtime order relative to harmony_pcie_init()
is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 20:59:59 +00:00
|
|
|
regulator-name = "vdd_ldo1,avdd_pll*";
|
|
|
|
|
regulator-min-microvolt = <1100000>;
|
|
|
|
|
regulator-max-microvolt = <1100000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
|
|
|
|
|
2012-09-20 23:04:06 +00:00
|
|
|
ldo2 {
|
ARM: dt: tegra: harmony: add regulators
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.
swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
this GPIO for now. This will be fixed when the PCIe driver is re-
written as a driver. The code can't regulator_get("vdd_1v05") right
now, because the vdd_1v05 regulator's probe gets deferred due to its
supply being the PMIC, which gets probed after the regulator the first
time around, and this dependency is only resolved by repeated probing,
which happens when deferred_probe_initcall() is called, which happens
in a late initcall, whose runtime order relative to harmony_pcie_init()
is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 20:59:59 +00:00
|
|
|
regulator-name = "vdd_ldo2,vdd_rtc";
|
|
|
|
|
regulator-min-microvolt = <1200000>;
|
|
|
|
|
regulator-max-microvolt = <1200000>;
|
|
|
|
|
};
|
|
|
|
|
|
2012-09-20 23:04:06 +00:00
|
|
|
ldo3 {
|
ARM: dt: tegra: harmony: add regulators
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.
swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
this GPIO for now. This will be fixed when the PCIe driver is re-
written as a driver. The code can't regulator_get("vdd_1v05") right
now, because the vdd_1v05 regulator's probe gets deferred due to its
supply being the PMIC, which gets probed after the regulator the first
time around, and this dependency is only resolved by repeated probing,
which happens when deferred_probe_initcall() is called, which happens
in a late initcall, whose runtime order relative to harmony_pcie_init()
is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 20:59:59 +00:00
|
|
|
regulator-name = "vdd_ldo3,avdd_usb*";
|
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
|
|
|
|
|
2012-09-20 23:04:06 +00:00
|
|
|
ldo4 {
|
ARM: dt: tegra: harmony: add regulators
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.
swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
this GPIO for now. This will be fixed when the PCIe driver is re-
written as a driver. The code can't regulator_get("vdd_1v05") right
now, because the vdd_1v05 regulator's probe gets deferred due to its
supply being the PMIC, which gets probed after the regulator the first
time around, and this dependency is only resolved by repeated probing,
which happens when deferred_probe_initcall() is called, which happens
in a late initcall, whose runtime order relative to harmony_pcie_init()
is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 20:59:59 +00:00
|
|
|
regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
|
|
|
|
|
2012-09-20 23:04:06 +00:00
|
|
|
ldo5 {
|
ARM: dt: tegra: harmony: add regulators
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.
swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
this GPIO for now. This will be fixed when the PCIe driver is re-
written as a driver. The code can't regulator_get("vdd_1v05") right
now, because the vdd_1v05 regulator's probe gets deferred due to its
supply being the PMIC, which gets probed after the regulator the first
time around, and this dependency is only resolved by repeated probing,
which happens when deferred_probe_initcall() is called, which happens
in a late initcall, whose runtime order relative to harmony_pcie_init()
is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 20:59:59 +00:00
|
|
|
regulator-name = "vdd_ldo5,vcore_mmc";
|
|
|
|
|
regulator-min-microvolt = <2850000>;
|
|
|
|
|
regulator-max-microvolt = <2850000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
|
|
|
|
|
2012-09-20 23:04:06 +00:00
|
|
|
ldo6 {
|
ARM: dt: tegra: harmony: add regulators
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.
swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
this GPIO for now. This will be fixed when the PCIe driver is re-
written as a driver. The code can't regulator_get("vdd_1v05") right
now, because the vdd_1v05 regulator's probe gets deferred due to its
supply being the PMIC, which gets probed after the regulator the first
time around, and this dependency is only resolved by repeated probing,
which happens when deferred_probe_initcall() is called, which happens
in a late initcall, whose runtime order relative to harmony_pcie_init()
is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 20:59:59 +00:00
|
|
|
regulator-name = "vdd_ldo6,avdd_vdac";
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
|
};
|
|
|
|
|
|
2012-11-09 23:58:11 +00:00
|
|
|
hdmi_vdd_reg: ldo7 {
|
2012-09-20 21:20:39 +00:00
|
|
|
regulator-name = "vdd_ldo7,avdd_hdmi";
|
ARM: dt: tegra: harmony: add regulators
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.
swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
this GPIO for now. This will be fixed when the PCIe driver is re-
written as a driver. The code can't regulator_get("vdd_1v05") right
now, because the vdd_1v05 regulator's probe gets deferred due to its
supply being the PMIC, which gets probed after the regulator the first
time around, and this dependency is only resolved by repeated probing,
which happens when deferred_probe_initcall() is called, which happens
in a late initcall, whose runtime order relative to harmony_pcie_init()
is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 20:59:59 +00:00
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
|
};
|
|
|
|
|
|
2012-11-09 23:58:11 +00:00
|
|
|
hdmi_pll_reg: ldo8 {
|
ARM: dt: tegra: harmony: add regulators
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.
swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
this GPIO for now. This will be fixed when the PCIe driver is re-
written as a driver. The code can't regulator_get("vdd_1v05") right
now, because the vdd_1v05 regulator's probe gets deferred due to its
supply being the PMIC, which gets probed after the regulator the first
time around, and this dependency is only resolved by repeated probing,
which happens when deferred_probe_initcall() is called, which happens
in a late initcall, whose runtime order relative to harmony_pcie_init()
is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 20:59:59 +00:00
|
|
|
regulator-name = "vdd_ldo8,avdd_hdmi_pll";
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
|
};
|
|
|
|
|
|
2012-09-20 23:04:06 +00:00
|
|
|
ldo9 {
|
ARM: dt: tegra: harmony: add regulators
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.
swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
this GPIO for now. This will be fixed when the PCIe driver is re-
written as a driver. The code can't regulator_get("vdd_1v05") right
now, because the vdd_1v05 regulator's probe gets deferred due to its
supply being the PMIC, which gets probed after the regulator the first
time around, and this dependency is only resolved by repeated probing,
which happens when deferred_probe_initcall() is called, which happens
in a late initcall, whose runtime order relative to harmony_pcie_init()
is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 20:59:59 +00:00
|
|
|
regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
|
|
|
|
|
regulator-min-microvolt = <2850000>;
|
|
|
|
|
regulator-max-microvolt = <2850000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
|
|
|
|
|
2012-09-20 23:04:06 +00:00
|
|
|
ldo_rtc {
|
ARM: dt: tegra: harmony: add regulators
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.
swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
this GPIO for now. This will be fixed when the PCIe driver is re-
written as a driver. The code can't regulator_get("vdd_1v05") right
now, because the vdd_1v05 regulator's probe gets deferred due to its
supply being the PMIC, which gets probed after the regulator the first
time around, and this dependency is only resolved by repeated probing,
which happens when deferred_probe_initcall() is called, which happens
in a late initcall, whose runtime order relative to harmony_pcie_init()
is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 20:59:59 +00:00
|
|
|
regulator-name = "vdd_rtc_out,vdd_cell";
|
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
2012-11-09 21:58:43 +00:00
|
|
|
|
|
|
|
|
temperature-sensor@4c {
|
|
|
|
|
compatible = "adi,adt7461";
|
|
|
|
|
reg = <0x4c>;
|
|
|
|
|
};
|
2011-07-19 23:26:54 +00:00
|
|
|
};
|
|
|
|
|
|
2013-11-26 00:53:16 +00:00
|
|
|
kbc@7000e200 {
|
2013-01-21 17:44:05 +00:00
|
|
|
status = "okay";
|
|
|
|
|
nvidia,debounce-delay-ms = <2>;
|
|
|
|
|
nvidia,repeat-delay-ms = <160>;
|
|
|
|
|
nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
|
|
|
|
|
nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>;
|
2013-12-02 13:09:57 +00:00
|
|
|
linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_W)
|
|
|
|
|
MATRIX_KEY(0x00, 0x03, KEY_S)
|
|
|
|
|
MATRIX_KEY(0x00, 0x04, KEY_A)
|
|
|
|
|
MATRIX_KEY(0x00, 0x05, KEY_Z)
|
|
|
|
|
MATRIX_KEY(0x00, 0x07, KEY_FN)
|
|
|
|
|
MATRIX_KEY(0x01, 0x07, KEY_MENU)
|
|
|
|
|
MATRIX_KEY(0x02, 0x06, KEY_LEFTALT)
|
|
|
|
|
MATRIX_KEY(0x02, 0x07, KEY_RIGHTALT)
|
|
|
|
|
MATRIX_KEY(0x03, 0x00, KEY_5)
|
|
|
|
|
MATRIX_KEY(0x03, 0x01, KEY_4)
|
|
|
|
|
MATRIX_KEY(0x03, 0x02, KEY_R)
|
|
|
|
|
MATRIX_KEY(0x03, 0x03, KEY_E)
|
|
|
|
|
MATRIX_KEY(0x03, 0x04, KEY_F)
|
|
|
|
|
MATRIX_KEY(0x03, 0x05, KEY_D)
|
|
|
|
|
MATRIX_KEY(0x03, 0x06, KEY_X)
|
|
|
|
|
MATRIX_KEY(0x04, 0x00, KEY_7)
|
|
|
|
|
MATRIX_KEY(0x04, 0x01, KEY_6)
|
|
|
|
|
MATRIX_KEY(0x04, 0x02, KEY_T)
|
|
|
|
|
MATRIX_KEY(0x04, 0x03, KEY_H)
|
|
|
|
|
MATRIX_KEY(0x04, 0x04, KEY_G)
|
|
|
|
|
MATRIX_KEY(0x04, 0x05, KEY_V)
|
|
|
|
|
MATRIX_KEY(0x04, 0x06, KEY_C)
|
|
|
|
|
MATRIX_KEY(0x04, 0x07, KEY_SPACE)
|
|
|
|
|
MATRIX_KEY(0x05, 0x00, KEY_9)
|
|
|
|
|
MATRIX_KEY(0x05, 0x01, KEY_8)
|
|
|
|
|
MATRIX_KEY(0x05, 0x02, KEY_U)
|
|
|
|
|
MATRIX_KEY(0x05, 0x03, KEY_Y)
|
|
|
|
|
MATRIX_KEY(0x05, 0x04, KEY_J)
|
|
|
|
|
MATRIX_KEY(0x05, 0x05, KEY_N)
|
|
|
|
|
MATRIX_KEY(0x05, 0x06, KEY_B)
|
|
|
|
|
MATRIX_KEY(0x05, 0x07, KEY_BACKSLASH)
|
|
|
|
|
MATRIX_KEY(0x06, 0x00, KEY_MINUS)
|
|
|
|
|
MATRIX_KEY(0x06, 0x01, KEY_0)
|
|
|
|
|
MATRIX_KEY(0x06, 0x02, KEY_O)
|
|
|
|
|
MATRIX_KEY(0x06, 0x03, KEY_I)
|
|
|
|
|
MATRIX_KEY(0x06, 0x04, KEY_L)
|
|
|
|
|
MATRIX_KEY(0x06, 0x05, KEY_K)
|
|
|
|
|
MATRIX_KEY(0x06, 0x06, KEY_COMMA)
|
|
|
|
|
MATRIX_KEY(0x06, 0x07, KEY_M)
|
|
|
|
|
MATRIX_KEY(0x07, 0x01, KEY_EQUAL)
|
|
|
|
|
MATRIX_KEY(0x07, 0x02, KEY_RIGHTBRACE)
|
|
|
|
|
MATRIX_KEY(0x07, 0x03, KEY_ENTER)
|
|
|
|
|
MATRIX_KEY(0x07, 0x07, KEY_MENU)
|
|
|
|
|
MATRIX_KEY(0x08, 0x04, KEY_LEFTSHIFT)
|
|
|
|
|
MATRIX_KEY(0x08, 0x05, KEY_RIGHTSHIFT)
|
|
|
|
|
MATRIX_KEY(0x09, 0x05, KEY_LEFTCTRL)
|
|
|
|
|
MATRIX_KEY(0x09, 0x07, KEY_RIGHTCTRL)
|
|
|
|
|
MATRIX_KEY(0x0B, 0x00, KEY_LEFTBRACE)
|
|
|
|
|
MATRIX_KEY(0x0B, 0x01, KEY_P)
|
|
|
|
|
MATRIX_KEY(0x0B, 0x02, KEY_APOSTROPHE)
|
|
|
|
|
MATRIX_KEY(0x0B, 0x03, KEY_SEMICOLON)
|
|
|
|
|
MATRIX_KEY(0x0B, 0x04, KEY_SLASH)
|
|
|
|
|
MATRIX_KEY(0x0B, 0x05, KEY_DOT)
|
|
|
|
|
MATRIX_KEY(0x0C, 0x00, KEY_F10)
|
|
|
|
|
MATRIX_KEY(0x0C, 0x01, KEY_F9)
|
|
|
|
|
MATRIX_KEY(0x0C, 0x02, KEY_BACKSPACE)
|
|
|
|
|
MATRIX_KEY(0x0C, 0x03, KEY_3)
|
|
|
|
|
MATRIX_KEY(0x0C, 0x04, KEY_2)
|
|
|
|
|
MATRIX_KEY(0x0C, 0x05, KEY_UP)
|
|
|
|
|
MATRIX_KEY(0x0C, 0x06, KEY_PRINT)
|
|
|
|
|
MATRIX_KEY(0x0C, 0x07, KEY_PAUSE)
|
|
|
|
|
MATRIX_KEY(0x0D, 0x00, KEY_INSERT)
|
|
|
|
|
MATRIX_KEY(0x0D, 0x01, KEY_DELETE)
|
|
|
|
|
MATRIX_KEY(0x0D, 0x03, KEY_PAGEUP )
|
|
|
|
|
MATRIX_KEY(0x0D, 0x04, KEY_PAGEDOWN)
|
|
|
|
|
MATRIX_KEY(0x0D, 0x05, KEY_RIGHT)
|
|
|
|
|
MATRIX_KEY(0x0D, 0x06, KEY_DOWN)
|
|
|
|
|
MATRIX_KEY(0x0D, 0x07, KEY_LEFT)
|
|
|
|
|
MATRIX_KEY(0x0E, 0x00, KEY_F11)
|
|
|
|
|
MATRIX_KEY(0x0E, 0x01, KEY_F12)
|
|
|
|
|
MATRIX_KEY(0x0E, 0x02, KEY_F8)
|
|
|
|
|
MATRIX_KEY(0x0E, 0x03, KEY_Q)
|
|
|
|
|
MATRIX_KEY(0x0E, 0x04, KEY_F4)
|
|
|
|
|
MATRIX_KEY(0x0E, 0x05, KEY_F3)
|
|
|
|
|
MATRIX_KEY(0x0E, 0x06, KEY_1)
|
|
|
|
|
MATRIX_KEY(0x0E, 0x07, KEY_F7)
|
|
|
|
|
MATRIX_KEY(0x0F, 0x00, KEY_ESC)
|
|
|
|
|
MATRIX_KEY(0x0F, 0x01, KEY_GRAVE)
|
|
|
|
|
MATRIX_KEY(0x0F, 0x02, KEY_F5)
|
|
|
|
|
MATRIX_KEY(0x0F, 0x03, KEY_TAB)
|
|
|
|
|
MATRIX_KEY(0x0F, 0x04, KEY_F1)
|
|
|
|
|
MATRIX_KEY(0x0F, 0x05, KEY_F2)
|
|
|
|
|
MATRIX_KEY(0x0F, 0x06, KEY_CAPSLOCK)
|
|
|
|
|
MATRIX_KEY(0x0F, 0x07, KEY_F6)
|
|
|
|
|
MATRIX_KEY(0x14, 0x00, KEY_KP7)
|
|
|
|
|
MATRIX_KEY(0x15, 0x00, KEY_KP9)
|
|
|
|
|
MATRIX_KEY(0x15, 0x01, KEY_KP8)
|
|
|
|
|
MATRIX_KEY(0x15, 0x02, KEY_KP4)
|
|
|
|
|
MATRIX_KEY(0x15, 0x04, KEY_KP1)
|
|
|
|
|
MATRIX_KEY(0x16, 0x01, KEY_KPSLASH)
|
|
|
|
|
MATRIX_KEY(0x16, 0x02, KEY_KP6)
|
|
|
|
|
MATRIX_KEY(0x16, 0x03, KEY_KP5)
|
|
|
|
|
MATRIX_KEY(0x16, 0x04, KEY_KP3)
|
|
|
|
|
MATRIX_KEY(0x16, 0x05, KEY_KP2)
|
|
|
|
|
MATRIX_KEY(0x16, 0x07, KEY_KP0)
|
|
|
|
|
MATRIX_KEY(0x1B, 0x01, KEY_KPASTERISK)
|
|
|
|
|
MATRIX_KEY(0x1B, 0x03, KEY_KPMINUS)
|
|
|
|
|
MATRIX_KEY(0x1B, 0x04, KEY_KPPLUS)
|
|
|
|
|
MATRIX_KEY(0x1B, 0x05, KEY_KPDOT)
|
|
|
|
|
MATRIX_KEY(0x1C, 0x05, KEY_VOLUMEUP)
|
|
|
|
|
MATRIX_KEY(0x1D, 0x03, KEY_HOME)
|
|
|
|
|
MATRIX_KEY(0x1D, 0x04, KEY_END)
|
|
|
|
|
MATRIX_KEY(0x1D, 0x05, KEY_BRIGHTNESSUP)
|
|
|
|
|
MATRIX_KEY(0x1D, 0x06, KEY_VOLUMEDOWN)
|
|
|
|
|
MATRIX_KEY(0x1D, 0x07, KEY_BRIGHTNESSDOWN)
|
|
|
|
|
MATRIX_KEY(0x1E, 0x00, KEY_NUMLOCK)
|
|
|
|
|
MATRIX_KEY(0x1E, 0x01, KEY_SCROLLLOCK)
|
|
|
|
|
MATRIX_KEY(0x1E, 0x02, KEY_MUTE)
|
|
|
|
|
MATRIX_KEY(0x1F, 0x04, KEY_QUESTION)>;
|
2013-01-21 17:44:05 +00:00
|
|
|
};
|
|
|
|
|
|
2013-11-26 21:43:45 +00:00
|
|
|
pmc@7000e400 {
|
|
|
|
|
nvidia,invert-interrupt;
|
|
|
|
|
nvidia,suspend-mode = <1>;
|
|
|
|
|
nvidia,cpu-pwr-good-time = <5000>;
|
|
|
|
|
nvidia,cpu-pwr-off-time = <5000>;
|
|
|
|
|
nvidia,core-pwr-good-time = <3845 3845>;
|
|
|
|
|
nvidia,core-pwr-off-time = <3875>;
|
|
|
|
|
nvidia,sys-clock-req-active-high;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
pcie-controller@80003000 {
|
2014-05-28 14:49:12 +00:00
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
|
|
avdd-pex-supply = <&pci_vdd_reg>;
|
|
|
|
|
vdd-pex-supply = <&pci_vdd_reg>;
|
|
|
|
|
avdd-pex-pll-supply = <&pci_vdd_reg>;
|
|
|
|
|
avdd-plle-supply = <&pci_vdd_reg>;
|
|
|
|
|
vddio-pex-clk-supply = <&pci_clk_reg>;
|
|
|
|
|
|
2013-11-26 21:43:45 +00:00
|
|
|
pci@1,0 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
pci@2,0 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
usb@c5000000 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
usb-phy@c5000000 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
usb@c5004000 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
|
|
|
|
|
GPIO_ACTIVE_LOW>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
usb-phy@c5004000 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
|
|
|
|
|
GPIO_ACTIVE_LOW>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
usb@c5008000 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
usb-phy@c5008000 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
sdhci@c8000200 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
|
|
|
|
|
wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
|
|
|
|
|
power-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
|
|
|
|
|
bus-width = <4>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
sdhci@c8000600 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>;
|
|
|
|
|
wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
|
|
|
|
|
power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
|
|
|
|
|
bus-width = <8>;
|
|
|
|
|
};
|
|
|
|
|
|
2013-12-19 15:59:25 +00:00
|
|
|
backlight: backlight {
|
|
|
|
|
compatible = "pwm-backlight";
|
|
|
|
|
|
|
|
|
|
enable-gpios = <&gpio TEGRA_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
|
|
|
|
|
power-supply = <&vdd_bl_reg>;
|
|
|
|
|
pwms = <&pwm 0 5000000>;
|
|
|
|
|
|
|
|
|
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
|
|
|
|
default-brightness-level = <6>;
|
|
|
|
|
};
|
|
|
|
|
|
2013-11-26 21:43:45 +00:00
|
|
|
clocks {
|
|
|
|
|
compatible = "simple-bus";
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
|
|
clk32k_in: clock@0 {
|
|
|
|
|
compatible = "fixed-clock";
|
|
|
|
|
reg=<0>;
|
|
|
|
|
#clock-cells = <0>;
|
|
|
|
|
clock-frequency = <32768>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
gpio-keys {
|
|
|
|
|
compatible = "gpio-keys";
|
|
|
|
|
|
|
|
|
|
power {
|
|
|
|
|
label = "Power";
|
|
|
|
|
gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
|
2013-12-02 13:09:57 +00:00
|
|
|
linux,code = <KEY_POWER>;
|
2013-11-26 21:43:45 +00:00
|
|
|
gpio-key,wakeup;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
2013-12-19 15:59:25 +00:00
|
|
|
panel: panel {
|
|
|
|
|
compatible = "auo,b101aw03", "simple-panel";
|
|
|
|
|
|
|
|
|
|
power-supply = <&vdd_pnl_reg>;
|
|
|
|
|
enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
|
|
|
|
|
|
|
|
|
|
backlight = <&backlight>;
|
|
|
|
|
};
|
|
|
|
|
|
ARM: dt: tegra: harmony: add regulators
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.
swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
this GPIO for now. This will be fixed when the PCIe driver is re-
written as a driver. The code can't regulator_get("vdd_1v05") right
now, because the vdd_1v05 regulator's probe gets deferred due to its
supply being the PMIC, which gets probed after the regulator the first
time around, and this dependency is only resolved by repeated probing,
which happens when deferred_probe_initcall() is called, which happens
in a late initcall, whose runtime order relative to harmony_pcie_init()
is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 20:59:59 +00:00
|
|
|
regulators {
|
|
|
|
|
compatible = "simple-bus";
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
|
|
vdd_5v0_reg: regulator@0 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <0>;
|
|
|
|
|
regulator-name = "vdd_5v0";
|
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
regulator@1 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <1>;
|
|
|
|
|
regulator-name = "vdd_1v5";
|
|
|
|
|
regulator-min-microvolt = <1500000>;
|
|
|
|
|
regulator-max-microvolt = <1500000>;
|
2013-02-13 00:25:15 +00:00
|
|
|
gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
|
ARM: dt: tegra: harmony: add regulators
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.
swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
this GPIO for now. This will be fixed when the PCIe driver is re-
written as a driver. The code can't regulator_get("vdd_1v05") right
now, because the vdd_1v05 regulator's probe gets deferred due to its
supply being the PMIC, which gets probed after the regulator the first
time around, and this dependency is only resolved by repeated probing,
which happens when deferred_probe_initcall() is called, which happens
in a late initcall, whose runtime order relative to harmony_pcie_init()
is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 20:59:59 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
regulator@2 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <2>;
|
|
|
|
|
regulator-name = "vdd_1v2";
|
|
|
|
|
regulator-min-microvolt = <1200000>;
|
|
|
|
|
regulator-max-microvolt = <1200000>;
|
2013-02-13 00:25:15 +00:00
|
|
|
gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
|
ARM: dt: tegra: harmony: add regulators
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.
swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
this GPIO for now. This will be fixed when the PCIe driver is re-
written as a driver. The code can't regulator_get("vdd_1v05") right
now, because the vdd_1v05 regulator's probe gets deferred due to its
supply being the PMIC, which gets probed after the regulator the first
time around, and this dependency is only resolved by repeated probing,
which happens when deferred_probe_initcall() is called, which happens
in a late initcall, whose runtime order relative to harmony_pcie_init()
is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 20:59:59 +00:00
|
|
|
enable-active-high;
|
|
|
|
|
};
|
|
|
|
|
|
2013-08-09 14:49:22 +00:00
|
|
|
pci_vdd_reg: regulator@3 {
|
ARM: dt: tegra: harmony: add regulators
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.
swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
this GPIO for now. This will be fixed when the PCIe driver is re-
written as a driver. The code can't regulator_get("vdd_1v05") right
now, because the vdd_1v05 regulator's probe gets deferred due to its
supply being the PMIC, which gets probed after the regulator the first
time around, and this dependency is only resolved by repeated probing,
which happens when deferred_probe_initcall() is called, which happens
in a late initcall, whose runtime order relative to harmony_pcie_init()
is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 20:59:59 +00:00
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <3>;
|
|
|
|
|
regulator-name = "vdd_1v05";
|
|
|
|
|
regulator-min-microvolt = <1050000>;
|
|
|
|
|
regulator-max-microvolt = <1050000>;
|
2013-02-13 00:25:15 +00:00
|
|
|
gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
|
ARM: dt: tegra: harmony: add regulators
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.
swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
this GPIO for now. This will be fixed when the PCIe driver is re-
written as a driver. The code can't regulator_get("vdd_1v05") right
now, because the vdd_1v05 regulator's probe gets deferred due to its
supply being the PMIC, which gets probed after the regulator the first
time around, and this dependency is only resolved by repeated probing,
which happens when deferred_probe_initcall() is called, which happens
in a late initcall, whose runtime order relative to harmony_pcie_init()
is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 20:59:59 +00:00
|
|
|
enable-active-high;
|
|
|
|
|
};
|
|
|
|
|
|
2013-12-19 15:59:25 +00:00
|
|
|
vdd_pnl_reg: regulator@4 {
|
ARM: dt: tegra: harmony: add regulators
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.
swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
this GPIO for now. This will be fixed when the PCIe driver is re-
written as a driver. The code can't regulator_get("vdd_1v05") right
now, because the vdd_1v05 regulator's probe gets deferred due to its
supply being the PMIC, which gets probed after the regulator the first
time around, and this dependency is only resolved by repeated probing,
which happens when deferred_probe_initcall() is called, which happens
in a late initcall, whose runtime order relative to harmony_pcie_init()
is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 20:59:59 +00:00
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <4>;
|
|
|
|
|
regulator-name = "vdd_pnl";
|
|
|
|
|
regulator-min-microvolt = <2800000>;
|
|
|
|
|
regulator-max-microvolt = <2800000>;
|
2013-02-13 00:25:15 +00:00
|
|
|
gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
|
ARM: dt: tegra: harmony: add regulators
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.
swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
this GPIO for now. This will be fixed when the PCIe driver is re-
written as a driver. The code can't regulator_get("vdd_1v05") right
now, because the vdd_1v05 regulator's probe gets deferred due to its
supply being the PMIC, which gets probed after the regulator the first
time around, and this dependency is only resolved by repeated probing,
which happens when deferred_probe_initcall() is called, which happens
in a late initcall, whose runtime order relative to harmony_pcie_init()
is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 20:59:59 +00:00
|
|
|
enable-active-high;
|
|
|
|
|
};
|
|
|
|
|
|
2013-12-19 15:59:25 +00:00
|
|
|
vdd_bl_reg: regulator@5 {
|
ARM: dt: tegra: harmony: add regulators
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.
swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
this GPIO for now. This will be fixed when the PCIe driver is re-
written as a driver. The code can't regulator_get("vdd_1v05") right
now, because the vdd_1v05 regulator's probe gets deferred due to its
supply being the PMIC, which gets probed after the regulator the first
time around, and this dependency is only resolved by repeated probing,
which happens when deferred_probe_initcall() is called, which happens
in a late initcall, whose runtime order relative to harmony_pcie_init()
is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 20:59:59 +00:00
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <5>;
|
|
|
|
|
regulator-name = "vdd_bl";
|
|
|
|
|
regulator-min-microvolt = <2800000>;
|
|
|
|
|
regulator-max-microvolt = <2800000>;
|
2013-02-13 00:25:15 +00:00
|
|
|
gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
|
ARM: dt: tegra: harmony: add regulators
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.
swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
this GPIO for now. This will be fixed when the PCIe driver is re-
written as a driver. The code can't regulator_get("vdd_1v05") right
now, because the vdd_1v05 regulator's probe gets deferred due to its
supply being the PMIC, which gets probed after the regulator the first
time around, and this dependency is only resolved by repeated probing,
which happens when deferred_probe_initcall() is called, which happens
in a late initcall, whose runtime order relative to harmony_pcie_init()
is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 20:59:59 +00:00
|
|
|
enable-active-high;
|
|
|
|
|
};
|
2014-04-25 15:44:48 +00:00
|
|
|
|
|
|
|
|
vdd_5v0_hdmi: regulator@6 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <6>;
|
|
|
|
|
regulator-name = "VDDIO_HDMI";
|
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
|
gpio = <&gpio TEGRA_GPIO(T, 2) GPIO_ACTIVE_HIGH>;
|
|
|
|
|
enable-active-high;
|
|
|
|
|
vin-supply = <&vdd_5v0_reg>;
|
|
|
|
|
};
|
ARM: dt: tegra: harmony: add regulators
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.
swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
this GPIO for now. This will be fixed when the PCIe driver is re-
written as a driver. The code can't regulator_get("vdd_1v05") right
now, because the vdd_1v05 regulator's probe gets deferred due to its
supply being the PMIC, which gets probed after the regulator the first
time around, and this dependency is only resolved by repeated probing,
which happens when deferred_probe_initcall() is called, which happens
in a late initcall, whose runtime order relative to harmony_pcie_init()
is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 20:59:59 +00:00
|
|
|
};
|
|
|
|
|
|
2012-05-11 23:03:26 +00:00
|
|
|
sound {
|
|
|
|
|
compatible = "nvidia,tegra-audio-wm8903-harmony",
|
|
|
|
|
"nvidia,tegra-audio-wm8903";
|
|
|
|
|
nvidia,model = "NVIDIA Tegra Harmony";
|
|
|
|
|
|
|
|
|
|
nvidia,audio-routing =
|
|
|
|
|
"Headphone Jack", "HPOUTR",
|
|
|
|
|
"Headphone Jack", "HPOUTL",
|
|
|
|
|
"Int Spk", "ROP",
|
|
|
|
|
"Int Spk", "RON",
|
|
|
|
|
"Int Spk", "LOP",
|
|
|
|
|
"Int Spk", "LON",
|
|
|
|
|
"Mic Jack", "MICBIAS",
|
|
|
|
|
"IN1L", "Mic Jack";
|
|
|
|
|
|
|
|
|
|
nvidia,i2s-controller = <&tegra_i2s1>;
|
|
|
|
|
nvidia,audio-codec = <&wm8903>;
|
|
|
|
|
|
2013-02-13 00:25:15 +00:00
|
|
|
nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
|
|
|
|
|
GPIO_ACTIVE_HIGH>;
|
|
|
|
|
nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0)
|
|
|
|
|
GPIO_ACTIVE_HIGH>;
|
|
|
|
|
nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1)
|
|
|
|
|
GPIO_ACTIVE_HIGH>;
|
2013-03-26 22:45:52 +00:00
|
|
|
|
2013-05-22 16:45:32 +00:00
|
|
|
clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
|
|
|
|
|
<&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
|
|
|
|
|
<&tegra_car TEGRA20_CLK_CDEV1>;
|
2013-03-26 22:45:52 +00:00
|
|
|
clock-names = "pll_a", "pll_a_out0", "mclk";
|
2012-04-12 21:46:49 +00:00
|
|
|
};
|
2011-07-19 23:26:54 +00:00
|
|
|
};
|
