linux/sound/pci/hda/hda_intel.c

2197 lines
60 KiB
C
Raw Normal View History

/*
*
* hda_intel.c - Implementation of primary alsa driver code base
* for Intel HD Audio.
*
* Copyright(c) 2004 Intel Corporation. All rights reserved.
*
* Copyright (c) 2004 Takashi Iwai <tiwai@suse.de>
* PeiSen Hou <pshou@realtek.com.tw>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc., 59
* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* CONTACTS:
*
* Matt Jared matt.jared@intel.com
* Andy Kopp andy.kopp@intel.com
* Dan Kogan dan.d.kogan@intel.com
*
* CHANGES:
*
* 2004.12.01 Major rewrite by tiwai, merged the work of pshou
*
*/
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/mutex.h>
#include <linux/io.h>
ALSA: hda - add runtime PM support Runtime PM can bring more power saving: - When the controller is suspended, its parent device will also have a chance to suspend. - PCI subsystem can choose the lowest power state the controller can signal wake up from. This state can be D3cold on platforms with ACPI PM support. And runtime PM can provide a gerneral sysfs interface for a system policy manager. Runtime PM support is based on current HDA power saving implementation. The user can enable runtime PM on platfroms that provide acceptable latency on transition from D3 to D0. Details: - When both power saving and runtime PM are enabled: -- If a codec supports 'stop-clock' in D3, it will request suspending the controller after it enters D3 and request resuming the controller before back to D0. Thus the controller will be suspended only when all codecs are suspended and support stop-clock in D3. -- User IO operations and HW wakeup signal can resume the controller back to D0. - If runtime PM is disabled, power saving just works as before. - If power saving is disabled, the controller won't be suspended because the power usage counter can never be 0. More about 'stop-clock' feature: If a codec can support targeted pass-through operations in D3 state when there is no BCLK present on the link, it will set CLKSTOP flag in the supported power states and report PS-ClkStopOk when entering D3 state. Please refer to HDA spec section 7.3.3.10 Power state and 7.3.4.12 Supported Power State. [Fixed CONFIG_PM_RUNTIME dependency in hda_intel.c by tiwai] Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-23 09:32:30 +00:00
#include <linux/pm_runtime.h>
#include <linux/clocksource.h>
#include <linux/time.h>
#include <linux/completion.h>
#ifdef CONFIG_X86
/* for snoop control */
#include <asm/pgtable.h>
#include <asm/cacheflush.h>
#endif
#include <sound/core.h>
#include <sound/initval.h>
#include <linux/vgaarb.h>
#include <linux/vga_switcheroo.h>
#include <linux/firmware.h>
#include "hda_codec.h"
#include "hda_controller.h"
#include "hda_priv.h"
#include "hda_i915.h"
/* position fix mode */
enum {
POS_FIX_AUTO,
POS_FIX_LPIB,
POS_FIX_POSBUF,
POS_FIX_VIACOMBO,
POS_FIX_COMBO,
};
/* Defines for ATI HD Audio support in SB450 south bridge */
#define ATI_SB450_HDAUDIO_MISC_CNTR2_ADDR 0x42
#define ATI_SB450_HDAUDIO_ENABLE_SNOOP 0x02
/* Defines for Nvidia HDA support */
#define NVIDIA_HDA_TRANSREG_ADDR 0x4e
#define NVIDIA_HDA_ENABLE_COHBITS 0x0f
#define NVIDIA_HDA_ISTRM_COH 0x4d
#define NVIDIA_HDA_OSTRM_COH 0x4c
#define NVIDIA_HDA_ENABLE_COHBIT 0x01
/* Defines for Intel SCH HDA snoop control */
#define INTEL_SCH_HDA_DEVC 0x78
#define INTEL_SCH_HDA_DEVC_NOSNOOP (0x1<<11)
/* Define IN stream 0 FIFO size offset in VIA controller */
#define VIA_IN_STREAM0_FIFO_SIZE_OFFSET 0x90
/* Define VIA HD Audio Device ID*/
#define VIA_HDAC_DEVICE_ID 0x3288
/* max number of SDs */
/* ICH, ATI and VIA have 4 playback and 4 capture */
#define ICH6_NUM_CAPTURE 4
#define ICH6_NUM_PLAYBACK 4
/* ULI has 6 playback and 5 capture */
#define ULI_NUM_CAPTURE 5
#define ULI_NUM_PLAYBACK 6
/* ATI HDMI may have up to 8 playbacks and 0 capture */
#define ATIHDMI_NUM_CAPTURE 0
#define ATIHDMI_NUM_PLAYBACK 8
/* TERA has 4 playback and 3 capture */
#define TERA_NUM_CAPTURE 3
#define TERA_NUM_PLAYBACK 4
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
static char *model[SNDRV_CARDS];
static int position_fix[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = -1};
static int bdl_pos_adj[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = -1};
static int probe_mask[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = -1};
static int probe_only[SNDRV_CARDS];
static int jackpoll_ms[SNDRV_CARDS];
static bool single_cmd;
static int enable_msi = -1;
#ifdef CONFIG_SND_HDA_PATCH_LOADER
static char *patch[SNDRV_CARDS];
#endif
#ifdef CONFIG_SND_HDA_INPUT_BEEP
static bool beep_mode[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] =
CONFIG_SND_HDA_INPUT_BEEP_MODE};
#endif
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for Intel HD audio interface.");
module_param_array(id, charp, NULL, 0444);
MODULE_PARM_DESC(id, "ID string for Intel HD audio interface.");
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable Intel HD audio interface.");
module_param_array(model, charp, NULL, 0444);
MODULE_PARM_DESC(model, "Use the given board model.");
module_param_array(position_fix, int, NULL, 0444);
MODULE_PARM_DESC(position_fix, "DMA pointer read method."
"(-1 = system default, 0 = auto, 1 = LPIB, 2 = POSBUF, 3 = VIACOMBO, 4 = COMBO).");
module_param_array(bdl_pos_adj, int, NULL, 0644);
MODULE_PARM_DESC(bdl_pos_adj, "BDL position adjustment offset.");
module_param_array(probe_mask, int, NULL, 0444);
MODULE_PARM_DESC(probe_mask, "Bitmask to probe codecs (default = -1).");
module_param_array(probe_only, int, NULL, 0444);
MODULE_PARM_DESC(probe_only, "Only probing and no codec initialization.");
module_param_array(jackpoll_ms, int, NULL, 0444);
MODULE_PARM_DESC(jackpoll_ms, "Ms between polling for jack events (default = 0, using unsol events only)");
module_param(single_cmd, bool, 0444);
MODULE_PARM_DESC(single_cmd, "Use single command to communicate with codecs "
"(for debugging only).");
module_param(enable_msi, bint, 0444);
MODULE_PARM_DESC(enable_msi, "Enable Message Signaled Interrupt (MSI)");
#ifdef CONFIG_SND_HDA_PATCH_LOADER
module_param_array(patch, charp, NULL, 0444);
MODULE_PARM_DESC(patch, "Patch file for Intel HD audio interface.");
#endif
#ifdef CONFIG_SND_HDA_INPUT_BEEP
module_param_array(beep_mode, bool, NULL, 0444);
MODULE_PARM_DESC(beep_mode, "Select HDA Beep registration mode "
"(0=off, 1=on) (default=1).");
#endif
#ifdef CONFIG_PM
static int param_set_xint(const char *val, const struct kernel_param *kp);
static struct kernel_param_ops param_ops_xint = {
.set = param_set_xint,
.get = param_get_int,
};
#define param_check_xint param_check_int
static int power_save = CONFIG_SND_HDA_POWER_SAVE_DEFAULT;
static int *power_save_addr = &power_save;
module_param(power_save, xint, 0644);
MODULE_PARM_DESC(power_save, "Automatic power-saving timeout "
"(in second, 0 = disable).");
/* reset the HD-audio controller in power save mode.
* this may give more power-saving, but will take longer time to
* wake up.
*/
static bool power_save_controller = 1;
module_param(power_save_controller, bool, 0644);
MODULE_PARM_DESC(power_save_controller, "Reset controller in power save mode.");
#else
static int *power_save_addr;
#endif /* CONFIG_PM */
static int align_buffer_size = -1;
module_param(align_buffer_size, bint, 0644);
MODULE_PARM_DESC(align_buffer_size,
"Force buffer and period sizes to be multiple of 128 bytes.");
#ifdef CONFIG_X86
static bool hda_snoop = true;
module_param_named(snoop, hda_snoop, bool, 0444);
MODULE_PARM_DESC(snoop, "Enable/disable snooping");
#else
#define hda_snoop true
#endif
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{Intel, ICH6},"
"{Intel, ICH6M},"
"{Intel, ICH7},"
"{Intel, ESB2},"
"{Intel, ICH8},"
"{Intel, ICH9},"
"{Intel, ICH10},"
"{Intel, PCH},"
"{Intel, CPT},"
"{Intel, PPT},"
"{Intel, LPT},"
"{Intel, LPT_LP},"
"{Intel, WPT_LP},"
"{Intel, SPT},"
"{Intel, HPT},"
"{Intel, PBG},"
"{Intel, SCH},"
"{ATI, SB450},"
"{ATI, SB600},"
"{ATI, RS600},"
"{ATI, RS690},"
"{ATI, RS780},"
"{ATI, R600},"
"{ATI, RV630},"
"{ATI, RV610},"
"{ATI, RV670},"
"{ATI, RV635},"
"{ATI, RV620},"
"{ATI, RV770},"
"{VIA, VT8251},"
"{VIA, VT8237A},"
"{SiS, SIS966},"
"{ULI, M5461}}");
MODULE_DESCRIPTION("Intel HDA driver");
#if defined(CONFIG_PM) && defined(CONFIG_VGA_SWITCHEROO)
#if IS_ENABLED(CONFIG_SND_HDA_CODEC_HDMI)
#define SUPPORT_VGA_SWITCHEROO
#endif
#endif
/*
*/
/* driver types */
enum {
AZX_DRIVER_ICH,
AZX_DRIVER_PCH,
AZX_DRIVER_SCH,
AZX_DRIVER_HDMI,
AZX_DRIVER_ATI,
AZX_DRIVER_ATIHDMI,
AZX_DRIVER_ATIHDMI_NS,
AZX_DRIVER_VIA,
AZX_DRIVER_SIS,
AZX_DRIVER_ULI,
AZX_DRIVER_NVIDIA,
AZX_DRIVER_TERA,
AZX_DRIVER_CTX,
AZX_DRIVER_CTHDA,
AZX_DRIVER_CMEDIA,
AZX_DRIVER_GENERIC,
AZX_NUM_DRIVERS, /* keep this as last entry */
};
/* quirks for Intel PCH */
#define AZX_DCAPS_INTEL_PCH_NOPM \
(AZX_DCAPS_SCH_SNOOP | AZX_DCAPS_BUFSIZE | \
AZX_DCAPS_COUNT_LPIB_DELAY | AZX_DCAPS_REVERSE_ASSIGN)
#define AZX_DCAPS_INTEL_PCH \
(AZX_DCAPS_INTEL_PCH_NOPM | AZX_DCAPS_PM_RUNTIME)
#define AZX_DCAPS_INTEL_HASWELL \
(AZX_DCAPS_SCH_SNOOP | AZX_DCAPS_ALIGN_BUFSIZE | \
AZX_DCAPS_COUNT_LPIB_DELAY | AZX_DCAPS_PM_RUNTIME | \
AZX_DCAPS_I915_POWERWELL)
/* Broadwell HDMI can't use position buffer reliably, force to use LPIB */
#define AZX_DCAPS_INTEL_BROADWELL \
(AZX_DCAPS_SCH_SNOOP | AZX_DCAPS_ALIGN_BUFSIZE | \
AZX_DCAPS_POSFIX_LPIB | AZX_DCAPS_PM_RUNTIME | \
AZX_DCAPS_I915_POWERWELL)
/* quirks for ATI SB / AMD Hudson */
#define AZX_DCAPS_PRESET_ATI_SB \
(AZX_DCAPS_ATI_SNOOP | AZX_DCAPS_NO_TCSEL | \
AZX_DCAPS_SYNC_WRITE | AZX_DCAPS_POSFIX_LPIB)
/* quirks for ATI/AMD HDMI */
#define AZX_DCAPS_PRESET_ATI_HDMI \
(AZX_DCAPS_NO_TCSEL | AZX_DCAPS_SYNC_WRITE | AZX_DCAPS_POSFIX_LPIB)
/* quirks for Nvidia */
#define AZX_DCAPS_PRESET_NVIDIA \
(AZX_DCAPS_NVIDIA_SNOOP | AZX_DCAPS_RIRB_DELAY | AZX_DCAPS_NO_MSI |\
AZX_DCAPS_ALIGN_BUFSIZE | AZX_DCAPS_NO_64BIT |\
AZX_DCAPS_CORBRP_SELF_CLEAR)
#define AZX_DCAPS_PRESET_CTHDA \
(AZX_DCAPS_NO_MSI | AZX_DCAPS_POSFIX_LPIB | AZX_DCAPS_4K_BDLE_BOUNDARY)
/*
* VGA-switcher support
*/
#ifdef SUPPORT_VGA_SWITCHEROO
#define use_vga_switcheroo(chip) ((chip)->use_vga_switcheroo)
#else
#define use_vga_switcheroo(chip) 0
#endif
static char *driver_short_names[] = {
[AZX_DRIVER_ICH] = "HDA Intel",
[AZX_DRIVER_PCH] = "HDA Intel PCH",
[AZX_DRIVER_SCH] = "HDA Intel MID",
[AZX_DRIVER_HDMI] = "HDA Intel HDMI",
[AZX_DRIVER_ATI] = "HDA ATI SB",
[AZX_DRIVER_ATIHDMI] = "HDA ATI HDMI",
[AZX_DRIVER_ATIHDMI_NS] = "HDA ATI HDMI",
[AZX_DRIVER_VIA] = "HDA VIA VT82xx",
[AZX_DRIVER_SIS] = "HDA SIS966",
[AZX_DRIVER_ULI] = "HDA ULI M5461",
[AZX_DRIVER_NVIDIA] = "HDA NVidia",
[AZX_DRIVER_TERA] = "HDA Teradici",
[AZX_DRIVER_CTX] = "HDA Creative",
[AZX_DRIVER_CTHDA] = "HDA Creative",
[AZX_DRIVER_CMEDIA] = "HDA C-Media",
[AZX_DRIVER_GENERIC] = "HD-Audio Generic",
};
struct hda_intel {
struct azx chip;
/* for pending irqs */
struct work_struct irq_pending_work;
/* sync probing */
struct completion probe_wait;
struct work_struct probe_work;
/* card list (for power_save trigger) */
struct list_head list;
/* extra flags */
unsigned int irq_pending_warned:1;
/* VGA-switcheroo setup */
unsigned int use_vga_switcheroo:1;
unsigned int vga_switcheroo_registered:1;
unsigned int init_failed:1; /* delayed init failed */
/* secondary power domain for hdmi audio under vga device */
struct dev_pm_domain hdmi_pm_domain;
};
#ifdef CONFIG_X86
static void __mark_pages_wc(struct azx *chip, struct snd_dma_buffer *dmab, bool on)
{
int pages;
if (azx_snoop(chip))
return;
if (!dmab || !dmab->area || !dmab->bytes)
return;
#ifdef CONFIG_SND_DMA_SGBUF
if (dmab->dev.type == SNDRV_DMA_TYPE_DEV_SG) {
struct snd_sg_buf *sgbuf = dmab->private_data;
if (on)
set_pages_array_wc(sgbuf->page_table, sgbuf->pages);
else
set_pages_array_wb(sgbuf->page_table, sgbuf->pages);
return;
}
#endif
pages = (dmab->bytes + PAGE_SIZE - 1) >> PAGE_SHIFT;
if (on)
set_memory_wc((unsigned long)dmab->area, pages);
else
set_memory_wb((unsigned long)dmab->area, pages);
}
static inline void mark_pages_wc(struct azx *chip, struct snd_dma_buffer *buf,
bool on)
{
__mark_pages_wc(chip, buf, on);
}
static inline void mark_runtime_wc(struct azx *chip, struct azx_dev *azx_dev,
struct snd_pcm_substream *substream, bool on)
{
if (azx_dev->wc_marked != on) {
__mark_pages_wc(chip, snd_pcm_get_dma_buf(substream), on);
azx_dev->wc_marked = on;
}
}
#else
/* NOP for other archs */
static inline void mark_pages_wc(struct azx *chip, struct snd_dma_buffer *buf,
bool on)
{
}
static inline void mark_runtime_wc(struct azx *chip, struct azx_dev *azx_dev,
struct snd_pcm_substream *substream, bool on)
{
}
#endif
static int azx_acquire_irq(struct azx *chip, int do_disconnect);
/*
* initialize the PCI registers
*/
/* update bits in a PCI register byte */
static void update_pci_byte(struct pci_dev *pci, unsigned int reg,
unsigned char mask, unsigned char val)
{
unsigned char data;
pci_read_config_byte(pci, reg, &data);
data &= ~mask;
data |= (val & mask);
pci_write_config_byte(pci, reg, data);
}
static void azx_init_pci(struct azx *chip)
{
/* Clear bits 0-2 of PCI register TCSEL (at offset 0x44)
* TCSEL == Traffic Class Select Register, which sets PCI express QOS
* Ensuring these bits are 0 clears playback static on some HD Audio
* codecs.
* The PCI register TCSEL is defined in the Intel manuals.
*/
if (!(chip->driver_caps & AZX_DCAPS_NO_TCSEL)) {
dev_dbg(chip->card->dev, "Clearing TCSEL\n");
update_pci_byte(chip->pci, AZX_PCIREG_TCSEL, 0x07, 0);
}
/* For ATI SB450/600/700/800/900 and AMD Hudson azalia HD audio,
* we need to enable snoop.
*/
if (chip->driver_caps & AZX_DCAPS_ATI_SNOOP) {
dev_dbg(chip->card->dev, "Setting ATI snoop: %d\n",
azx_snoop(chip));
update_pci_byte(chip->pci,
ATI_SB450_HDAUDIO_MISC_CNTR2_ADDR, 0x07,
azx_snoop(chip) ? ATI_SB450_HDAUDIO_ENABLE_SNOOP : 0);
}
/* For NVIDIA HDA, enable snoop */
if (chip->driver_caps & AZX_DCAPS_NVIDIA_SNOOP) {
dev_dbg(chip->card->dev, "Setting Nvidia snoop: %d\n",
azx_snoop(chip));
update_pci_byte(chip->pci,
NVIDIA_HDA_TRANSREG_ADDR,
0x0f, NVIDIA_HDA_ENABLE_COHBITS);
update_pci_byte(chip->pci,
NVIDIA_HDA_ISTRM_COH,
0x01, NVIDIA_HDA_ENABLE_COHBIT);
update_pci_byte(chip->pci,
NVIDIA_HDA_OSTRM_COH,
0x01, NVIDIA_HDA_ENABLE_COHBIT);
}
/* Enable SCH/PCH snoop if needed */
if (chip->driver_caps & AZX_DCAPS_SCH_SNOOP) {
unsigned short snoop;
pci_read_config_word(chip->pci, INTEL_SCH_HDA_DEVC, &snoop);
if ((!azx_snoop(chip) && !(snoop & INTEL_SCH_HDA_DEVC_NOSNOOP)) ||
(azx_snoop(chip) && (snoop & INTEL_SCH_HDA_DEVC_NOSNOOP))) {
snoop &= ~INTEL_SCH_HDA_DEVC_NOSNOOP;
if (!azx_snoop(chip))
snoop |= INTEL_SCH_HDA_DEVC_NOSNOOP;
pci_write_config_word(chip->pci, INTEL_SCH_HDA_DEVC, snoop);
pci_read_config_word(chip->pci,
INTEL_SCH_HDA_DEVC, &snoop);
}
dev_dbg(chip->card->dev, "SCH snoop: %s\n",
(snoop & INTEL_SCH_HDA_DEVC_NOSNOOP) ?
"Disabled" : "Enabled");
}
}
/* calculate runtime delay from LPIB */
static int azx_get_delay_from_lpib(struct azx *chip, struct azx_dev *azx_dev,
unsigned int pos)
{
struct snd_pcm_substream *substream = azx_dev->substream;
int stream = substream->stream;
unsigned int lpib_pos = azx_get_pos_lpib(chip, azx_dev);
int delay;
if (stream == SNDRV_PCM_STREAM_PLAYBACK)
delay = pos - lpib_pos;
else
delay = lpib_pos - pos;
if (delay < 0) {
if (delay >= azx_dev->delay_negative_threshold)
delay = 0;
else
delay += azx_dev->bufsize;
}
if (delay >= azx_dev->period_bytes) {
dev_info(chip->card->dev,
"Unstable LPIB (%d >= %d); disabling LPIB delay counting\n",
delay, azx_dev->period_bytes);
delay = 0;
chip->driver_caps &= ~AZX_DCAPS_COUNT_LPIB_DELAY;
chip->get_delay[stream] = NULL;
}
return bytes_to_frames(substream->runtime, delay);
}
static int azx_position_ok(struct azx *chip, struct azx_dev *azx_dev);
/* called from IRQ */
static int azx_position_check(struct azx *chip, struct azx_dev *azx_dev)
{
struct hda_intel *hda = container_of(chip, struct hda_intel, chip);
int ok;
ok = azx_position_ok(chip, azx_dev);
if (ok == 1) {
azx_dev->irq_pending = 0;
return ok;
} else if (ok == 0 && chip->bus && chip->bus->workq) {
/* bogus IRQ, process it later */
azx_dev->irq_pending = 1;
queue_work(chip->bus->workq, &hda->irq_pending_work);
}
return 0;
}
/*
* Check whether the current DMA position is acceptable for updating
* periods. Returns non-zero if it's OK.
*
* Many HD-audio controllers appear pretty inaccurate about
* the update-IRQ timing. The IRQ is issued before actually the
* data is processed. So, we need to process it afterwords in a
* workqueue.
*/
static int azx_position_ok(struct azx *chip, struct azx_dev *azx_dev)
{
struct snd_pcm_substream *substream = azx_dev->substream;
int stream = substream->stream;
u32 wallclk;
unsigned int pos;
wallclk = azx_readl(chip, WALLCLK) - azx_dev->start_wallclk;
if (wallclk < (azx_dev->period_wallclk * 2) / 3)
return -1; /* bogus (too early) interrupt */
if (chip->get_position[stream])
pos = chip->get_position[stream](chip, azx_dev);
else { /* use the position buffer as default */
pos = azx_get_pos_posbuf(chip, azx_dev);
if (!pos || pos == (u32)-1) {
dev_info(chip->card->dev,
"Invalid position buffer, using LPIB read method instead.\n");
chip->get_position[stream] = azx_get_pos_lpib;
pos = azx_get_pos_lpib(chip, azx_dev);
chip->get_delay[stream] = NULL;
} else {
chip->get_position[stream] = azx_get_pos_posbuf;
if (chip->driver_caps & AZX_DCAPS_COUNT_LPIB_DELAY)
chip->get_delay[stream] = azx_get_delay_from_lpib;
}
}
if (pos >= azx_dev->bufsize)
pos = 0;
if (WARN_ONCE(!azx_dev->period_bytes,
"hda-intel: zero azx_dev->period_bytes"))
return -1; /* this shouldn't happen! */
if (wallclk < (azx_dev->period_wallclk * 5) / 4 &&
pos % azx_dev->period_bytes > azx_dev->period_bytes / 2)
/* NG - it's below the first next period boundary */
return chip->bdl_pos_adj[chip->dev_index] ? 0 : -1;
azx_dev->start_wallclk += wallclk;
return 1; /* OK, it's fine */
}
/*
* The work for pending PCM period updates.
*/
static void azx_irq_pending_work(struct work_struct *work)
{
struct hda_intel *hda = container_of(work, struct hda_intel, irq_pending_work);
struct azx *chip = &hda->chip;
int i, pending, ok;
if (!hda->irq_pending_warned) {
dev_info(chip->card->dev,
"IRQ timing workaround is activated for card #%d. Suggest a bigger bdl_pos_adj.\n",
chip->card->number);
hda->irq_pending_warned = 1;
}
for (;;) {
pending = 0;
spin_lock_irq(&chip->reg_lock);
for (i = 0; i < chip->num_streams; i++) {
struct azx_dev *azx_dev = &chip->azx_dev[i];
if (!azx_dev->irq_pending ||
!azx_dev->substream ||
!azx_dev->running)
continue;
ok = azx_position_ok(chip, azx_dev);
if (ok > 0) {
azx_dev->irq_pending = 0;
spin_unlock(&chip->reg_lock);
snd_pcm_period_elapsed(azx_dev->substream);
spin_lock(&chip->reg_lock);
} else if (ok < 0) {
pending = 0; /* too early */
} else
pending++;
}
spin_unlock_irq(&chip->reg_lock);
if (!pending)
return;
msleep(1);
}
}
/* clear irq_pending flags and assure no on-going workq */
static void azx_clear_irq_pending(struct azx *chip)
{
int i;
spin_lock_irq(&chip->reg_lock);
for (i = 0; i < chip->num_streams; i++)
chip->azx_dev[i].irq_pending = 0;
spin_unlock_irq(&chip->reg_lock);
}
static int azx_acquire_irq(struct azx *chip, int do_disconnect)
{
if (request_irq(chip->pci->irq, azx_interrupt,
chip->msi ? 0 : IRQF_SHARED,
KBUILD_MODNAME, chip)) {
dev_err(chip->card->dev,
"unable to grab IRQ %d, disabling device\n",
chip->pci->irq);
if (do_disconnect)
snd_card_disconnect(chip->card);
return -1;
}
chip->irq = chip->pci->irq;
pci_intx(chip->pci, !chip->msi);
return 0;
}
/* get the current DMA position with correction on VIA chips */
static unsigned int azx_via_get_position(struct azx *chip,
struct azx_dev *azx_dev)
{
unsigned int link_pos, mini_pos, bound_pos;
unsigned int mod_link_pos, mod_dma_pos, mod_mini_pos;
unsigned int fifo_size;
link_pos = azx_sd_readl(chip, azx_dev, SD_LPIB);
if (azx_dev->substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
/* Playback, no problem using link position */
return link_pos;
}
/* Capture */
/* For new chipset,
* use mod to get the DMA position just like old chipset
*/
mod_dma_pos = le32_to_cpu(*azx_dev->posbuf);
mod_dma_pos %= azx_dev->period_bytes;
/* azx_dev->fifo_size can't get FIFO size of in stream.
* Get from base address + offset.
*/
fifo_size = readw(chip->remap_addr + VIA_IN_STREAM0_FIFO_SIZE_OFFSET);
if (azx_dev->insufficient) {
/* Link position never gather than FIFO size */
if (link_pos <= fifo_size)
return 0;
azx_dev->insufficient = 0;
}
if (link_pos <= fifo_size)
mini_pos = azx_dev->bufsize + link_pos - fifo_size;
else
mini_pos = link_pos - fifo_size;
/* Find nearest previous boudary */
mod_mini_pos = mini_pos % azx_dev->period_bytes;
mod_link_pos = link_pos % azx_dev->period_bytes;
if (mod_link_pos >= fifo_size)
bound_pos = link_pos - mod_link_pos;
else if (mod_dma_pos >= mod_mini_pos)
bound_pos = mini_pos - mod_mini_pos;
else {
bound_pos = mini_pos - mod_mini_pos + azx_dev->period_bytes;
if (bound_pos >= azx_dev->bufsize)
bound_pos = 0;
}
/* Calculate real DMA position we want */
return bound_pos + mod_dma_pos;
}
#ifdef CONFIG_PM
static DEFINE_MUTEX(card_list_lock);
static LIST_HEAD(card_list);
static void azx_add_card_list(struct azx *chip)
{
struct hda_intel *hda = container_of(chip, struct hda_intel, chip);
mutex_lock(&card_list_lock);
list_add(&hda->list, &card_list);
mutex_unlock(&card_list_lock);
}
static void azx_del_card_list(struct azx *chip)
{
struct hda_intel *hda = container_of(chip, struct hda_intel, chip);
mutex_lock(&card_list_lock);
list_del_init(&hda->list);
mutex_unlock(&card_list_lock);
}
/* trigger power-save check at writing parameter */
static int param_set_xint(const char *val, const struct kernel_param *kp)
{
struct hda_intel *hda;
struct azx *chip;
struct hda_codec *c;
int prev = power_save;
int ret = param_set_int(val, kp);
if (ret || prev == power_save)
return ret;
mutex_lock(&card_list_lock);
list_for_each_entry(hda, &card_list, list) {
chip = &hda->chip;
if (!chip->bus || chip->disabled)
continue;
list_for_each_entry(c, &chip->bus->codec_list, list)
snd_hda_power_sync(c);
}
mutex_unlock(&card_list_lock);
return 0;
}
#else
#define azx_add_card_list(chip) /* NOP */
#define azx_del_card_list(chip) /* NOP */
#endif /* CONFIG_PM */
#if defined(CONFIG_PM_SLEEP) || defined(SUPPORT_VGA_SWITCHEROO)
/*
* power management
*/
static int azx_suspend(struct device *dev)
{
struct pci_dev *pci = to_pci_dev(dev);
struct snd_card *card = dev_get_drvdata(dev);
struct azx *chip;
struct hda_intel *hda;
struct azx_pcm *p;
if (!card)
return 0;
chip = card->private_data;
hda = container_of(chip, struct hda_intel, chip);
if (chip->disabled || hda->init_failed)
return 0;
snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
azx_clear_irq_pending(chip);
list_for_each_entry(p, &chip->pcm_list, list)
snd_pcm_suspend_all(p->pcm);
if (chip->initialized)
snd_hda_suspend(chip->bus);
azx_stop_chip(chip);
azx_enter_link_reset(chip);
if (chip->irq >= 0) {
free_irq(chip->irq, chip);
chip->irq = -1;
}
if (chip->msi)
pci_disable_msi(chip->pci);
pci_disable_device(pci);
pci_save_state(pci);
pci_set_power_state(pci, PCI_D3hot);
if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL)
hda_display_power(false);
return 0;
}
static int azx_resume(struct device *dev)
{
struct pci_dev *pci = to_pci_dev(dev);
struct snd_card *card = dev_get_drvdata(dev);
struct azx *chip;
struct hda_intel *hda;
if (!card)
return 0;
chip = card->private_data;
hda = container_of(chip, struct hda_intel, chip);
if (chip->disabled || hda->init_failed)
return 0;
if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL) {
hda_display_power(true);
haswell_set_bclk(chip);
}
pci_set_power_state(pci, PCI_D0);
pci_restore_state(pci);
if (pci_enable_device(pci) < 0) {
dev_err(chip->card->dev,
"pci_enable_device failed, disabling device\n");
snd_card_disconnect(card);
return -EIO;
}
pci_set_master(pci);
if (chip->msi)
if (pci_enable_msi(pci) < 0)
chip->msi = 0;
if (azx_acquire_irq(chip, 1) < 0)
return -EIO;
azx_init_pci(chip);
azx_init_chip(chip, true);
snd_hda_resume(chip->bus);
snd_power_change_state(card, SNDRV_CTL_POWER_D0);
return 0;
}
ALSA: hda - add runtime PM support Runtime PM can bring more power saving: - When the controller is suspended, its parent device will also have a chance to suspend. - PCI subsystem can choose the lowest power state the controller can signal wake up from. This state can be D3cold on platforms with ACPI PM support. And runtime PM can provide a gerneral sysfs interface for a system policy manager. Runtime PM support is based on current HDA power saving implementation. The user can enable runtime PM on platfroms that provide acceptable latency on transition from D3 to D0. Details: - When both power saving and runtime PM are enabled: -- If a codec supports 'stop-clock' in D3, it will request suspending the controller after it enters D3 and request resuming the controller before back to D0. Thus the controller will be suspended only when all codecs are suspended and support stop-clock in D3. -- User IO operations and HW wakeup signal can resume the controller back to D0. - If runtime PM is disabled, power saving just works as before. - If power saving is disabled, the controller won't be suspended because the power usage counter can never be 0. More about 'stop-clock' feature: If a codec can support targeted pass-through operations in D3 state when there is no BCLK present on the link, it will set CLKSTOP flag in the supported power states and report PS-ClkStopOk when entering D3 state. Please refer to HDA spec section 7.3.3.10 Power state and 7.3.4.12 Supported Power State. [Fixed CONFIG_PM_RUNTIME dependency in hda_intel.c by tiwai] Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-23 09:32:30 +00:00
#endif /* CONFIG_PM_SLEEP || SUPPORT_VGA_SWITCHEROO */
#ifdef CONFIG_PM_RUNTIME
static int azx_runtime_suspend(struct device *dev)
{
struct snd_card *card = dev_get_drvdata(dev);
struct azx *chip;
struct hda_intel *hda;
ALSA: hda - add runtime PM support Runtime PM can bring more power saving: - When the controller is suspended, its parent device will also have a chance to suspend. - PCI subsystem can choose the lowest power state the controller can signal wake up from. This state can be D3cold on platforms with ACPI PM support. And runtime PM can provide a gerneral sysfs interface for a system policy manager. Runtime PM support is based on current HDA power saving implementation. The user can enable runtime PM on platfroms that provide acceptable latency on transition from D3 to D0. Details: - When both power saving and runtime PM are enabled: -- If a codec supports 'stop-clock' in D3, it will request suspending the controller after it enters D3 and request resuming the controller before back to D0. Thus the controller will be suspended only when all codecs are suspended and support stop-clock in D3. -- User IO operations and HW wakeup signal can resume the controller back to D0. - If runtime PM is disabled, power saving just works as before. - If power saving is disabled, the controller won't be suspended because the power usage counter can never be 0. More about 'stop-clock' feature: If a codec can support targeted pass-through operations in D3 state when there is no BCLK present on the link, it will set CLKSTOP flag in the supported power states and report PS-ClkStopOk when entering D3 state. Please refer to HDA spec section 7.3.3.10 Power state and 7.3.4.12 Supported Power State. [Fixed CONFIG_PM_RUNTIME dependency in hda_intel.c by tiwai] Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-23 09:32:30 +00:00
if (!card)
return 0;
chip = card->private_data;
hda = container_of(chip, struct hda_intel, chip);
if (chip->disabled || hda->init_failed)
snd/hda: add runtime suspend/resume on optimus support (v4) Add support for HDMI audio device on VGA cards that powerdown to D3cold using non-standard ACPI/PCI infrastructure (optimus). This does a couple of things to make it work: a) add a set of power ops for the hdmi domain, and enables them via vga_switcheroo when we are a switcheroo controlled card. This just replaces the runtime resume operation so that when the card is in D3cold the userspace pci config space access via sysfs, the vga switcheroon runtime resume gets called first and it calls the GPU resume callback before calling the sound card runtime resume. b) standard ACPI/PCI stacks won't put a device into D3cold without an ACPI handle, but since the hdmi audio devices on gpus don't have an ACPI handle, we need to manually force the device into D3cold after suspend from the switcheroo path only. c) don't try and do runtime s/r when the GPU is off. d) call runtime suspend/resume during switcheroo suspend/resume this is to make sure the runtime stack knows to try and resume the hdmi audio device for pci config space access. v2: fix incorrect runtime call suspend->resume. v3: rework irq handler to avoid false irq when we are resuming but haven't runtime resumed yet, don't bother trying D3cold, it won't work, just set it manually ourselves, move runtime s/r calls outside the main s/r hook. enable dnyamic pm properly by dropping reference. v4: put back irq handler check just wrap it with cap check Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-07-29 05:19:29 +00:00
return 0;
if (!(chip->driver_caps & AZX_DCAPS_PM_RUNTIME))
return 0;
/* enable controller wake up event */
azx_writew(chip, WAKEEN, azx_readw(chip, WAKEEN) |
STATESTS_INT_MASK);
ALSA: hda - add runtime PM support Runtime PM can bring more power saving: - When the controller is suspended, its parent device will also have a chance to suspend. - PCI subsystem can choose the lowest power state the controller can signal wake up from. This state can be D3cold on platforms with ACPI PM support. And runtime PM can provide a gerneral sysfs interface for a system policy manager. Runtime PM support is based on current HDA power saving implementation. The user can enable runtime PM on platfroms that provide acceptable latency on transition from D3 to D0. Details: - When both power saving and runtime PM are enabled: -- If a codec supports 'stop-clock' in D3, it will request suspending the controller after it enters D3 and request resuming the controller before back to D0. Thus the controller will be suspended only when all codecs are suspended and support stop-clock in D3. -- User IO operations and HW wakeup signal can resume the controller back to D0. - If runtime PM is disabled, power saving just works as before. - If power saving is disabled, the controller won't be suspended because the power usage counter can never be 0. More about 'stop-clock' feature: If a codec can support targeted pass-through operations in D3 state when there is no BCLK present on the link, it will set CLKSTOP flag in the supported power states and report PS-ClkStopOk when entering D3 state. Please refer to HDA spec section 7.3.3.10 Power state and 7.3.4.12 Supported Power State. [Fixed CONFIG_PM_RUNTIME dependency in hda_intel.c by tiwai] Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-23 09:32:30 +00:00
azx_stop_chip(chip);
azx_enter_link_reset(chip);
ALSA: hda - add runtime PM support Runtime PM can bring more power saving: - When the controller is suspended, its parent device will also have a chance to suspend. - PCI subsystem can choose the lowest power state the controller can signal wake up from. This state can be D3cold on platforms with ACPI PM support. And runtime PM can provide a gerneral sysfs interface for a system policy manager. Runtime PM support is based on current HDA power saving implementation. The user can enable runtime PM on platfroms that provide acceptable latency on transition from D3 to D0. Details: - When both power saving and runtime PM are enabled: -- If a codec supports 'stop-clock' in D3, it will request suspending the controller after it enters D3 and request resuming the controller before back to D0. Thus the controller will be suspended only when all codecs are suspended and support stop-clock in D3. -- User IO operations and HW wakeup signal can resume the controller back to D0. - If runtime PM is disabled, power saving just works as before. - If power saving is disabled, the controller won't be suspended because the power usage counter can never be 0. More about 'stop-clock' feature: If a codec can support targeted pass-through operations in D3 state when there is no BCLK present on the link, it will set CLKSTOP flag in the supported power states and report PS-ClkStopOk when entering D3 state. Please refer to HDA spec section 7.3.3.10 Power state and 7.3.4.12 Supported Power State. [Fixed CONFIG_PM_RUNTIME dependency in hda_intel.c by tiwai] Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-23 09:32:30 +00:00
azx_clear_irq_pending(chip);
if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL)
hda_display_power(false);
ALSA: hda - add runtime PM support Runtime PM can bring more power saving: - When the controller is suspended, its parent device will also have a chance to suspend. - PCI subsystem can choose the lowest power state the controller can signal wake up from. This state can be D3cold on platforms with ACPI PM support. And runtime PM can provide a gerneral sysfs interface for a system policy manager. Runtime PM support is based on current HDA power saving implementation. The user can enable runtime PM on platfroms that provide acceptable latency on transition from D3 to D0. Details: - When both power saving and runtime PM are enabled: -- If a codec supports 'stop-clock' in D3, it will request suspending the controller after it enters D3 and request resuming the controller before back to D0. Thus the controller will be suspended only when all codecs are suspended and support stop-clock in D3. -- User IO operations and HW wakeup signal can resume the controller back to D0. - If runtime PM is disabled, power saving just works as before. - If power saving is disabled, the controller won't be suspended because the power usage counter can never be 0. More about 'stop-clock' feature: If a codec can support targeted pass-through operations in D3 state when there is no BCLK present on the link, it will set CLKSTOP flag in the supported power states and report PS-ClkStopOk when entering D3 state. Please refer to HDA spec section 7.3.3.10 Power state and 7.3.4.12 Supported Power State. [Fixed CONFIG_PM_RUNTIME dependency in hda_intel.c by tiwai] Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-23 09:32:30 +00:00
return 0;
}
static int azx_runtime_resume(struct device *dev)
{
struct snd_card *card = dev_get_drvdata(dev);
struct azx *chip;
struct hda_intel *hda;
struct hda_bus *bus;
struct hda_codec *codec;
int status;
ALSA: hda - add runtime PM support Runtime PM can bring more power saving: - When the controller is suspended, its parent device will also have a chance to suspend. - PCI subsystem can choose the lowest power state the controller can signal wake up from. This state can be D3cold on platforms with ACPI PM support. And runtime PM can provide a gerneral sysfs interface for a system policy manager. Runtime PM support is based on current HDA power saving implementation. The user can enable runtime PM on platfroms that provide acceptable latency on transition from D3 to D0. Details: - When both power saving and runtime PM are enabled: -- If a codec supports 'stop-clock' in D3, it will request suspending the controller after it enters D3 and request resuming the controller before back to D0. Thus the controller will be suspended only when all codecs are suspended and support stop-clock in D3. -- User IO operations and HW wakeup signal can resume the controller back to D0. - If runtime PM is disabled, power saving just works as before. - If power saving is disabled, the controller won't be suspended because the power usage counter can never be 0. More about 'stop-clock' feature: If a codec can support targeted pass-through operations in D3 state when there is no BCLK present on the link, it will set CLKSTOP flag in the supported power states and report PS-ClkStopOk when entering D3 state. Please refer to HDA spec section 7.3.3.10 Power state and 7.3.4.12 Supported Power State. [Fixed CONFIG_PM_RUNTIME dependency in hda_intel.c by tiwai] Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-23 09:32:30 +00:00
if (!card)
return 0;
chip = card->private_data;
hda = container_of(chip, struct hda_intel, chip);
if (chip->disabled || hda->init_failed)
snd/hda: add runtime suspend/resume on optimus support (v4) Add support for HDMI audio device on VGA cards that powerdown to D3cold using non-standard ACPI/PCI infrastructure (optimus). This does a couple of things to make it work: a) add a set of power ops for the hdmi domain, and enables them via vga_switcheroo when we are a switcheroo controlled card. This just replaces the runtime resume operation so that when the card is in D3cold the userspace pci config space access via sysfs, the vga switcheroon runtime resume gets called first and it calls the GPU resume callback before calling the sound card runtime resume. b) standard ACPI/PCI stacks won't put a device into D3cold without an ACPI handle, but since the hdmi audio devices on gpus don't have an ACPI handle, we need to manually force the device into D3cold after suspend from the switcheroo path only. c) don't try and do runtime s/r when the GPU is off. d) call runtime suspend/resume during switcheroo suspend/resume this is to make sure the runtime stack knows to try and resume the hdmi audio device for pci config space access. v2: fix incorrect runtime call suspend->resume. v3: rework irq handler to avoid false irq when we are resuming but haven't runtime resumed yet, don't bother trying D3cold, it won't work, just set it manually ourselves, move runtime s/r calls outside the main s/r hook. enable dnyamic pm properly by dropping reference. v4: put back irq handler check just wrap it with cap check Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-07-29 05:19:29 +00:00
return 0;
if (!(chip->driver_caps & AZX_DCAPS_PM_RUNTIME))
return 0;
if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL) {
hda_display_power(true);
haswell_set_bclk(chip);
}
/* Read STATESTS before controller reset */
status = azx_readw(chip, STATESTS);
ALSA: hda - add runtime PM support Runtime PM can bring more power saving: - When the controller is suspended, its parent device will also have a chance to suspend. - PCI subsystem can choose the lowest power state the controller can signal wake up from. This state can be D3cold on platforms with ACPI PM support. And runtime PM can provide a gerneral sysfs interface for a system policy manager. Runtime PM support is based on current HDA power saving implementation. The user can enable runtime PM on platfroms that provide acceptable latency on transition from D3 to D0. Details: - When both power saving and runtime PM are enabled: -- If a codec supports 'stop-clock' in D3, it will request suspending the controller after it enters D3 and request resuming the controller before back to D0. Thus the controller will be suspended only when all codecs are suspended and support stop-clock in D3. -- User IO operations and HW wakeup signal can resume the controller back to D0. - If runtime PM is disabled, power saving just works as before. - If power saving is disabled, the controller won't be suspended because the power usage counter can never be 0. More about 'stop-clock' feature: If a codec can support targeted pass-through operations in D3 state when there is no BCLK present on the link, it will set CLKSTOP flag in the supported power states and report PS-ClkStopOk when entering D3 state. Please refer to HDA spec section 7.3.3.10 Power state and 7.3.4.12 Supported Power State. [Fixed CONFIG_PM_RUNTIME dependency in hda_intel.c by tiwai] Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-23 09:32:30 +00:00
azx_init_pci(chip);
azx_init_chip(chip, true);
bus = chip->bus;
if (status && bus) {
list_for_each_entry(codec, &bus->codec_list, list)
if (status & (1 << codec->addr))
queue_delayed_work(codec->bus->workq,
&codec->jackpoll_work, codec->jackpoll_interval);
}
/* disable controller Wake Up event*/
azx_writew(chip, WAKEEN, azx_readw(chip, WAKEEN) &
~STATESTS_INT_MASK);
ALSA: hda - add runtime PM support Runtime PM can bring more power saving: - When the controller is suspended, its parent device will also have a chance to suspend. - PCI subsystem can choose the lowest power state the controller can signal wake up from. This state can be D3cold on platforms with ACPI PM support. And runtime PM can provide a gerneral sysfs interface for a system policy manager. Runtime PM support is based on current HDA power saving implementation. The user can enable runtime PM on platfroms that provide acceptable latency on transition from D3 to D0. Details: - When both power saving and runtime PM are enabled: -- If a codec supports 'stop-clock' in D3, it will request suspending the controller after it enters D3 and request resuming the controller before back to D0. Thus the controller will be suspended only when all codecs are suspended and support stop-clock in D3. -- User IO operations and HW wakeup signal can resume the controller back to D0. - If runtime PM is disabled, power saving just works as before. - If power saving is disabled, the controller won't be suspended because the power usage counter can never be 0. More about 'stop-clock' feature: If a codec can support targeted pass-through operations in D3 state when there is no BCLK present on the link, it will set CLKSTOP flag in the supported power states and report PS-ClkStopOk when entering D3 state. Please refer to HDA spec section 7.3.3.10 Power state and 7.3.4.12 Supported Power State. [Fixed CONFIG_PM_RUNTIME dependency in hda_intel.c by tiwai] Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-23 09:32:30 +00:00
return 0;
}
static int azx_runtime_idle(struct device *dev)
{
struct snd_card *card = dev_get_drvdata(dev);
struct azx *chip;
struct hda_intel *hda;
if (!card)
return 0;
chip = card->private_data;
hda = container_of(chip, struct hda_intel, chip);
if (chip->disabled || hda->init_failed)
snd/hda: add runtime suspend/resume on optimus support (v4) Add support for HDMI audio device on VGA cards that powerdown to D3cold using non-standard ACPI/PCI infrastructure (optimus). This does a couple of things to make it work: a) add a set of power ops for the hdmi domain, and enables them via vga_switcheroo when we are a switcheroo controlled card. This just replaces the runtime resume operation so that when the card is in D3cold the userspace pci config space access via sysfs, the vga switcheroon runtime resume gets called first and it calls the GPU resume callback before calling the sound card runtime resume. b) standard ACPI/PCI stacks won't put a device into D3cold without an ACPI handle, but since the hdmi audio devices on gpus don't have an ACPI handle, we need to manually force the device into D3cold after suspend from the switcheroo path only. c) don't try and do runtime s/r when the GPU is off. d) call runtime suspend/resume during switcheroo suspend/resume this is to make sure the runtime stack knows to try and resume the hdmi audio device for pci config space access. v2: fix incorrect runtime call suspend->resume. v3: rework irq handler to avoid false irq when we are resuming but haven't runtime resumed yet, don't bother trying D3cold, it won't work, just set it manually ourselves, move runtime s/r calls outside the main s/r hook. enable dnyamic pm properly by dropping reference. v4: put back irq handler check just wrap it with cap check Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-07-29 05:19:29 +00:00
return 0;
if (!power_save_controller ||
!(chip->driver_caps & AZX_DCAPS_PM_RUNTIME))
return -EBUSY;
return 0;
}
ALSA: hda - add runtime PM support Runtime PM can bring more power saving: - When the controller is suspended, its parent device will also have a chance to suspend. - PCI subsystem can choose the lowest power state the controller can signal wake up from. This state can be D3cold on platforms with ACPI PM support. And runtime PM can provide a gerneral sysfs interface for a system policy manager. Runtime PM support is based on current HDA power saving implementation. The user can enable runtime PM on platfroms that provide acceptable latency on transition from D3 to D0. Details: - When both power saving and runtime PM are enabled: -- If a codec supports 'stop-clock' in D3, it will request suspending the controller after it enters D3 and request resuming the controller before back to D0. Thus the controller will be suspended only when all codecs are suspended and support stop-clock in D3. -- User IO operations and HW wakeup signal can resume the controller back to D0. - If runtime PM is disabled, power saving just works as before. - If power saving is disabled, the controller won't be suspended because the power usage counter can never be 0. More about 'stop-clock' feature: If a codec can support targeted pass-through operations in D3 state when there is no BCLK present on the link, it will set CLKSTOP flag in the supported power states and report PS-ClkStopOk when entering D3 state. Please refer to HDA spec section 7.3.3.10 Power state and 7.3.4.12 Supported Power State. [Fixed CONFIG_PM_RUNTIME dependency in hda_intel.c by tiwai] Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-23 09:32:30 +00:00
#endif /* CONFIG_PM_RUNTIME */
#ifdef CONFIG_PM
static const struct dev_pm_ops azx_pm = {
SET_SYSTEM_SLEEP_PM_OPS(azx_suspend, azx_resume)
SET_RUNTIME_PM_OPS(azx_runtime_suspend, azx_runtime_resume, azx_runtime_idle)
ALSA: hda - add runtime PM support Runtime PM can bring more power saving: - When the controller is suspended, its parent device will also have a chance to suspend. - PCI subsystem can choose the lowest power state the controller can signal wake up from. This state can be D3cold on platforms with ACPI PM support. And runtime PM can provide a gerneral sysfs interface for a system policy manager. Runtime PM support is based on current HDA power saving implementation. The user can enable runtime PM on platfroms that provide acceptable latency on transition from D3 to D0. Details: - When both power saving and runtime PM are enabled: -- If a codec supports 'stop-clock' in D3, it will request suspending the controller after it enters D3 and request resuming the controller before back to D0. Thus the controller will be suspended only when all codecs are suspended and support stop-clock in D3. -- User IO operations and HW wakeup signal can resume the controller back to D0. - If runtime PM is disabled, power saving just works as before. - If power saving is disabled, the controller won't be suspended because the power usage counter can never be 0. More about 'stop-clock' feature: If a codec can support targeted pass-through operations in D3 state when there is no BCLK present on the link, it will set CLKSTOP flag in the supported power states and report PS-ClkStopOk when entering D3 state. Please refer to HDA spec section 7.3.3.10 Power state and 7.3.4.12 Supported Power State. [Fixed CONFIG_PM_RUNTIME dependency in hda_intel.c by tiwai] Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-23 09:32:30 +00:00
};
#define AZX_PM_OPS &azx_pm
#else
#define AZX_PM_OPS NULL
ALSA: hda - add runtime PM support Runtime PM can bring more power saving: - When the controller is suspended, its parent device will also have a chance to suspend. - PCI subsystem can choose the lowest power state the controller can signal wake up from. This state can be D3cold on platforms with ACPI PM support. And runtime PM can provide a gerneral sysfs interface for a system policy manager. Runtime PM support is based on current HDA power saving implementation. The user can enable runtime PM on platfroms that provide acceptable latency on transition from D3 to D0. Details: - When both power saving and runtime PM are enabled: -- If a codec supports 'stop-clock' in D3, it will request suspending the controller after it enters D3 and request resuming the controller before back to D0. Thus the controller will be suspended only when all codecs are suspended and support stop-clock in D3. -- User IO operations and HW wakeup signal can resume the controller back to D0. - If runtime PM is disabled, power saving just works as before. - If power saving is disabled, the controller won't be suspended because the power usage counter can never be 0. More about 'stop-clock' feature: If a codec can support targeted pass-through operations in D3 state when there is no BCLK present on the link, it will set CLKSTOP flag in the supported power states and report PS-ClkStopOk when entering D3 state. Please refer to HDA spec section 7.3.3.10 Power state and 7.3.4.12 Supported Power State. [Fixed CONFIG_PM_RUNTIME dependency in hda_intel.c by tiwai] Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-23 09:32:30 +00:00
#endif /* CONFIG_PM */
static int azx_probe_continue(struct azx *chip);
#ifdef SUPPORT_VGA_SWITCHEROO
static struct pci_dev *get_bound_vga(struct pci_dev *pci);
static void azx_vs_set_state(struct pci_dev *pci,
enum vga_switcheroo_state state)
{
struct snd_card *card = pci_get_drvdata(pci);
struct azx *chip = card->private_data;
struct hda_intel *hda = container_of(chip, struct hda_intel, chip);
bool disabled;
wait_for_completion(&hda->probe_wait);
if (hda->init_failed)
return;
disabled = (state == VGA_SWITCHEROO_OFF);
if (chip->disabled == disabled)
return;
if (!chip->bus) {
chip->disabled = disabled;
if (!disabled) {
dev_info(chip->card->dev,
"Start delayed initialization\n");
if (azx_probe_continue(chip) < 0) {
dev_err(chip->card->dev, "initialization error\n");
hda->init_failed = true;
}
}
} else {
dev_info(chip->card->dev, "%s via VGA-switcheroo\n",
disabled ? "Disabling" : "Enabling");
if (disabled) {
pm_runtime_put_sync_suspend(card->dev);
azx_suspend(card->dev);
snd/hda: add runtime suspend/resume on optimus support (v4) Add support for HDMI audio device on VGA cards that powerdown to D3cold using non-standard ACPI/PCI infrastructure (optimus). This does a couple of things to make it work: a) add a set of power ops for the hdmi domain, and enables them via vga_switcheroo when we are a switcheroo controlled card. This just replaces the runtime resume operation so that when the card is in D3cold the userspace pci config space access via sysfs, the vga switcheroon runtime resume gets called first and it calls the GPU resume callback before calling the sound card runtime resume. b) standard ACPI/PCI stacks won't put a device into D3cold without an ACPI handle, but since the hdmi audio devices on gpus don't have an ACPI handle, we need to manually force the device into D3cold after suspend from the switcheroo path only. c) don't try and do runtime s/r when the GPU is off. d) call runtime suspend/resume during switcheroo suspend/resume this is to make sure the runtime stack knows to try and resume the hdmi audio device for pci config space access. v2: fix incorrect runtime call suspend->resume. v3: rework irq handler to avoid false irq when we are resuming but haven't runtime resumed yet, don't bother trying D3cold, it won't work, just set it manually ourselves, move runtime s/r calls outside the main s/r hook. enable dnyamic pm properly by dropping reference. v4: put back irq handler check just wrap it with cap check Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-07-29 05:19:29 +00:00
/* when we get suspended by vga switcheroo we end up in D3cold,
* however we have no ACPI handle, so pci/acpi can't put us there,
* put ourselves there */
pci->current_state = PCI_D3cold;
chip->disabled = true;
if (snd_hda_lock_devices(chip->bus))
dev_warn(chip->card->dev,
"Cannot lock devices!\n");
} else {
snd_hda_unlock_devices(chip->bus);
pm_runtime_get_noresume(card->dev);
chip->disabled = false;
azx_resume(card->dev);
}
}
}
static bool azx_vs_can_switch(struct pci_dev *pci)
{
struct snd_card *card = pci_get_drvdata(pci);
struct azx *chip = card->private_data;
struct hda_intel *hda = container_of(chip, struct hda_intel, chip);
wait_for_completion(&hda->probe_wait);
if (hda->init_failed)
return false;
if (chip->disabled || !chip->bus)
return true;
if (snd_hda_lock_devices(chip->bus))
return false;
snd_hda_unlock_devices(chip->bus);
return true;
}
static void init_vga_switcheroo(struct azx *chip)
{
struct hda_intel *hda = container_of(chip, struct hda_intel, chip);
struct pci_dev *p = get_bound_vga(chip->pci);
if (p) {
dev_info(chip->card->dev,
"Handle VGA-switcheroo audio client\n");
hda->use_vga_switcheroo = 1;
pci_dev_put(p);
}
}
static const struct vga_switcheroo_client_ops azx_vs_ops = {
.set_gpu_state = azx_vs_set_state,
.can_switch = azx_vs_can_switch,
};
static int register_vga_switcheroo(struct azx *chip)
{
struct hda_intel *hda = container_of(chip, struct hda_intel, chip);
int err;
if (!hda->use_vga_switcheroo)
return 0;
/* FIXME: currently only handling DIS controller
* is there any machine with two switchable HDMI audio controllers?
*/
err = vga_switcheroo_register_audio_client(chip->pci, &azx_vs_ops,
VGA_SWITCHEROO_DIS,
chip->bus != NULL);
if (err < 0)
return err;
hda->vga_switcheroo_registered = 1;
snd/hda: add runtime suspend/resume on optimus support (v4) Add support for HDMI audio device on VGA cards that powerdown to D3cold using non-standard ACPI/PCI infrastructure (optimus). This does a couple of things to make it work: a) add a set of power ops for the hdmi domain, and enables them via vga_switcheroo when we are a switcheroo controlled card. This just replaces the runtime resume operation so that when the card is in D3cold the userspace pci config space access via sysfs, the vga switcheroon runtime resume gets called first and it calls the GPU resume callback before calling the sound card runtime resume. b) standard ACPI/PCI stacks won't put a device into D3cold without an ACPI handle, but since the hdmi audio devices on gpus don't have an ACPI handle, we need to manually force the device into D3cold after suspend from the switcheroo path only. c) don't try and do runtime s/r when the GPU is off. d) call runtime suspend/resume during switcheroo suspend/resume this is to make sure the runtime stack knows to try and resume the hdmi audio device for pci config space access. v2: fix incorrect runtime call suspend->resume. v3: rework irq handler to avoid false irq when we are resuming but haven't runtime resumed yet, don't bother trying D3cold, it won't work, just set it manually ourselves, move runtime s/r calls outside the main s/r hook. enable dnyamic pm properly by dropping reference. v4: put back irq handler check just wrap it with cap check Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-07-29 05:19:29 +00:00
/* register as an optimus hdmi audio power domain */
vga_switcheroo_init_domain_pm_optimus_hdmi_audio(chip->card->dev,
&hda->hdmi_pm_domain);
return 0;
}
#else
#define init_vga_switcheroo(chip) /* NOP */
#define register_vga_switcheroo(chip) 0
#define check_hdmi_disabled(pci) false
#endif /* SUPPORT_VGA_SWITCHER */
/*
* destructor
*/
static int azx_free(struct azx *chip)
{
struct pci_dev *pci = chip->pci;
struct hda_intel *hda = container_of(chip, struct hda_intel, chip);
int i;
if ((chip->driver_caps & AZX_DCAPS_PM_RUNTIME)
&& chip->running)
pm_runtime_get_noresume(&pci->dev);
azx_del_card_list(chip);
azx_notifier_unregister(chip);
hda->init_failed = 1; /* to be sure */
complete_all(&hda->probe_wait);
if (use_vga_switcheroo(hda)) {
if (chip->disabled && chip->bus)
snd_hda_unlock_devices(chip->bus);
if (hda->vga_switcheroo_registered)
vga_switcheroo_unregister_client(chip->pci);
}
if (chip->initialized) {
azx_clear_irq_pending(chip);
for (i = 0; i < chip->num_streams; i++)
azx_stream_stop(chip, &chip->azx_dev[i]);
azx_stop_chip(chip);
}
if (chip->irq >= 0)
free_irq(chip->irq, (void*)chip);
if (chip->msi)
pci_disable_msi(chip->pci);
if (chip->remap_addr)
iounmap(chip->remap_addr);
azx_free_stream_pages(chip);
if (chip->region_requested)
pci_release_regions(chip->pci);
pci_disable_device(chip->pci);
kfree(chip->azx_dev);
#ifdef CONFIG_SND_HDA_PATCH_LOADER
if (chip->fw)
release_firmware(chip->fw);
#endif
if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL) {
hda_display_power(false);
hda_i915_exit();
}
kfree(hda);
return 0;
}
static int azx_dev_free(struct snd_device *device)
{
return azx_free(device->device_data);
}
#ifdef SUPPORT_VGA_SWITCHEROO
/*
* Check of disabled HDMI controller by vga-switcheroo
*/
static struct pci_dev *get_bound_vga(struct pci_dev *pci)
{
struct pci_dev *p;
/* check only discrete GPU */
switch (pci->vendor) {
case PCI_VENDOR_ID_ATI:
case PCI_VENDOR_ID_AMD:
case PCI_VENDOR_ID_NVIDIA:
if (pci->devfn == 1) {
p = pci_get_domain_bus_and_slot(pci_domain_nr(pci->bus),
pci->bus->number, 0);
if (p) {
if ((p->class >> 8) == PCI_CLASS_DISPLAY_VGA)
return p;
pci_dev_put(p);
}
}
break;
}
return NULL;
}
static bool check_hdmi_disabled(struct pci_dev *pci)
{
bool vga_inactive = false;
struct pci_dev *p = get_bound_vga(pci);
if (p) {
if (vga_switcheroo_get_client_state(p) == VGA_SWITCHEROO_OFF)
vga_inactive = true;
pci_dev_put(p);
}
return vga_inactive;
}
#endif /* SUPPORT_VGA_SWITCHEROO */
/*
* white/black-listing for position_fix
*/
static struct snd_pci_quirk position_fix_list[] = {
SND_PCI_QUIRK(0x1028, 0x01cc, "Dell D820", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1028, 0x01de, "Dell Precision 390", POS_FIX_LPIB),
SND_PCI_QUIRK(0x103c, 0x306d, "HP dv3", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS M2V", POS_FIX_LPIB),
SND_PCI_QUIRK(0x104d, 0x9069, "Sony VPCS11V9E", POS_FIX_LPIB),
SND_PCI_QUIRK(0x10de, 0xcb89, "Macbook Pro 7,1", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1297, 0x3166, "Shuttle", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1458, 0xa022, "ga-ma770-ud3", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1462, 0x1002, "MSI Wind U115", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1565, 0x8218, "Biostar Microtech", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1849, 0x0888, "775Dual-VSTA", POS_FIX_LPIB),
SND_PCI_QUIRK(0x8086, 0x2503, "DG965OT AAD63733-203", POS_FIX_LPIB),
{}
};
static int check_position_fix(struct azx *chip, int fix)
{
const struct snd_pci_quirk *q;
switch (fix) {
case POS_FIX_AUTO:
case POS_FIX_LPIB:
case POS_FIX_POSBUF:
case POS_FIX_VIACOMBO:
case POS_FIX_COMBO:
return fix;
}
q = snd_pci_quirk_lookup(chip->pci, position_fix_list);
if (q) {
dev_info(chip->card->dev,
"position_fix set to %d for device %04x:%04x\n",
q->value, q->subvendor, q->subdevice);
return q->value;
}
/* Check VIA/ATI HD Audio Controller exist */
if (chip->driver_caps & AZX_DCAPS_POSFIX_VIA) {
dev_dbg(chip->card->dev, "Using VIACOMBO position fix\n");
return POS_FIX_VIACOMBO;
}
if (chip->driver_caps & AZX_DCAPS_POSFIX_LPIB) {
dev_dbg(chip->card->dev, "Using LPIB position fix\n");
return POS_FIX_LPIB;
}
return POS_FIX_AUTO;
}
static void assign_position_fix(struct azx *chip, int fix)
{
static azx_get_pos_callback_t callbacks[] = {
[POS_FIX_AUTO] = NULL,
[POS_FIX_LPIB] = azx_get_pos_lpib,
[POS_FIX_POSBUF] = azx_get_pos_posbuf,
[POS_FIX_VIACOMBO] = azx_via_get_position,
[POS_FIX_COMBO] = azx_get_pos_lpib,
};
chip->get_position[0] = chip->get_position[1] = callbacks[fix];
/* combo mode uses LPIB only for playback */
if (fix == POS_FIX_COMBO)
chip->get_position[1] = NULL;
if (fix == POS_FIX_POSBUF &&
(chip->driver_caps & AZX_DCAPS_COUNT_LPIB_DELAY)) {
chip->get_delay[0] = chip->get_delay[1] =
azx_get_delay_from_lpib;
}
}
/*
* black-lists for probe_mask
*/
static struct snd_pci_quirk probe_mask_list[] = {
/* Thinkpad often breaks the controller communication when accessing
* to the non-working (or non-existing) modem codec slot.
*/
SND_PCI_QUIRK(0x1014, 0x05b7, "Thinkpad Z60", 0x01),
SND_PCI_QUIRK(0x17aa, 0x2010, "Thinkpad X/T/R60", 0x01),
SND_PCI_QUIRK(0x17aa, 0x20ac, "Thinkpad X/T/R61", 0x01),
/* broken BIOS */
SND_PCI_QUIRK(0x1028, 0x20ac, "Dell Studio Desktop", 0x01),
/* including bogus ALC268 in slot#2 that conflicts with ALC888 */
SND_PCI_QUIRK(0x17c0, 0x4085, "Medion MD96630", 0x01),
/* forced codec slots */
SND_PCI_QUIRK(0x1043, 0x1262, "ASUS W5Fm", 0x103),
SND_PCI_QUIRK(0x1046, 0x1262, "ASUS W5F", 0x103),
/* WinFast VP200 H (Teradici) user reported broken communication */
SND_PCI_QUIRK(0x3a21, 0x040d, "WinFast VP200 H", 0x101),
{}
};
#define AZX_FORCE_CODEC_MASK 0x100
static void check_probe_mask(struct azx *chip, int dev)
{
const struct snd_pci_quirk *q;
chip->codec_probe_mask = probe_mask[dev];
if (chip->codec_probe_mask == -1) {
q = snd_pci_quirk_lookup(chip->pci, probe_mask_list);
if (q) {
dev_info(chip->card->dev,
"probe_mask set to 0x%x for device %04x:%04x\n",
q->value, q->subvendor, q->subdevice);
chip->codec_probe_mask = q->value;
}
}
/* check forced option */
if (chip->codec_probe_mask != -1 &&
(chip->codec_probe_mask & AZX_FORCE_CODEC_MASK)) {
chip->codec_mask = chip->codec_probe_mask & 0xff;
dev_info(chip->card->dev, "codec_mask forced to 0x%x\n",
chip->codec_mask);
}
}
/*
* white/black-list for enable_msi
*/
static struct snd_pci_quirk msi_black_list[] = {
SND_PCI_QUIRK(0x103c, 0x2191, "HP", 0), /* AMD Hudson */
SND_PCI_QUIRK(0x103c, 0x2192, "HP", 0), /* AMD Hudson */
SND_PCI_QUIRK(0x103c, 0x21f7, "HP", 0), /* AMD Hudson */
SND_PCI_QUIRK(0x103c, 0x21fa, "HP", 0), /* AMD Hudson */
SND_PCI_QUIRK(0x1043, 0x81f2, "ASUS", 0), /* Athlon64 X2 + nvidia */
SND_PCI_QUIRK(0x1043, 0x81f6, "ASUS", 0), /* nvidia */
SND_PCI_QUIRK(0x1043, 0x822d, "ASUS", 0), /* Athlon64 X2 + nvidia MCP55 */
SND_PCI_QUIRK(0x1179, 0xfb44, "Toshiba Satellite C870", 0), /* AMD Hudson */
SND_PCI_QUIRK(0x1849, 0x0888, "ASRock", 0), /* Athlon64 X2 + nvidia */
SND_PCI_QUIRK(0xa0a0, 0x0575, "Aopen MZ915-M", 0), /* ICH6 */
{}
};
static void check_msi(struct azx *chip)
{
const struct snd_pci_quirk *q;
if (enable_msi >= 0) {
chip->msi = !!enable_msi;
return;
}
chip->msi = 1; /* enable MSI as default */
q = snd_pci_quirk_lookup(chip->pci, msi_black_list);
if (q) {
dev_info(chip->card->dev,
"msi for device %04x:%04x set to %d\n",
q->subvendor, q->subdevice, q->value);
chip->msi = q->value;
return;
}
/* NVidia chipsets seem to cause troubles with MSI */
if (chip->driver_caps & AZX_DCAPS_NO_MSI) {
dev_info(chip->card->dev, "Disabling MSI\n");
chip->msi = 0;
}
}
/* check the snoop mode availability */
static void azx_check_snoop_available(struct azx *chip)
{
bool snoop = chip->snoop;
switch (chip->driver_type) {
case AZX_DRIVER_VIA:
/* force to non-snoop mode for a new VIA controller
* when BIOS is set
*/
if (snoop) {
u8 val;
pci_read_config_byte(chip->pci, 0x42, &val);
if (!(val & 0x80) && chip->pci->revision == 0x30)
snoop = false;
}
break;
case AZX_DRIVER_ATIHDMI_NS:
/* new ATI HDMI requires non-snoop */
snoop = false;
break;
case AZX_DRIVER_CTHDA:
case AZX_DRIVER_CMEDIA:
snoop = false;
break;
}
if (snoop != chip->snoop) {
dev_info(chip->card->dev, "Force to %s mode\n",
snoop ? "snoop" : "non-snoop");
chip->snoop = snoop;
}
}
static void azx_probe_work(struct work_struct *work)
{
struct hda_intel *hda = container_of(work, struct hda_intel, probe_work);
azx_probe_continue(&hda->chip);
}
/*
* constructor
*/
static int azx_create(struct snd_card *card, struct pci_dev *pci,
int dev, unsigned int driver_caps,
const struct hda_controller_ops *hda_ops,
struct azx **rchip)
{
static struct snd_device_ops ops = {
.dev_free = azx_dev_free,
};
struct hda_intel *hda;
struct azx *chip;
int err;
*rchip = NULL;
err = pci_enable_device(pci);
if (err < 0)
return err;
hda = kzalloc(sizeof(*hda), GFP_KERNEL);
if (!hda) {
dev_err(card->dev, "Cannot allocate hda\n");
pci_disable_device(pci);
return -ENOMEM;
}
chip = &hda->chip;
spin_lock_init(&chip->reg_lock);
mutex_init(&chip->open_mutex);
chip->card = card;
chip->pci = pci;
chip->ops = hda_ops;
chip->irq = -1;
chip->driver_caps = driver_caps;
chip->driver_type = driver_caps & 0xff;
check_msi(chip);
chip->dev_index = dev;
chip->jackpoll_ms = jackpoll_ms;
INIT_LIST_HEAD(&chip->pcm_list);
INIT_WORK(&hda->irq_pending_work, azx_irq_pending_work);
INIT_LIST_HEAD(&hda->list);
init_vga_switcheroo(chip);
init_completion(&hda->probe_wait);
assign_position_fix(chip, check_position_fix(chip, position_fix[dev]));
check_probe_mask(chip, dev);
chip->single_cmd = single_cmd;
chip->snoop = hda_snoop;
azx_check_snoop_available(chip);
if (bdl_pos_adj[dev] < 0) {
switch (chip->driver_type) {
case AZX_DRIVER_ICH:
case AZX_DRIVER_PCH:
bdl_pos_adj[dev] = 1;
break;
default:
bdl_pos_adj[dev] = 32;
break;
}
}
chip->bdl_pos_adj = bdl_pos_adj;
err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
if (err < 0) {
dev_err(card->dev, "Error creating device [card]!\n");
azx_free(chip);
return err;
}
/* continue probing in work context as may trigger request module */
INIT_WORK(&hda->probe_work, azx_probe_work);
*rchip = chip;
return 0;
}
static int azx_first_init(struct azx *chip)
{
int dev = chip->dev_index;
struct pci_dev *pci = chip->pci;
struct snd_card *card = chip->card;
int err;
unsigned short gcap;
#if BITS_PER_LONG != 64
/* Fix up base address on ULI M5461 */
if (chip->driver_type == AZX_DRIVER_ULI) {
u16 tmp3;
pci_read_config_word(pci, 0x40, &tmp3);
pci_write_config_word(pci, 0x40, tmp3 | 0x10);
pci_write_config_dword(pci, PCI_BASE_ADDRESS_1, 0);
}
#endif
err = pci_request_regions(pci, "ICH HD audio");
if (err < 0)
return err;
chip->region_requested = 1;
chip->addr = pci_resource_start(pci, 0);
chip->remap_addr = pci_ioremap_bar(pci, 0);
if (chip->remap_addr == NULL) {
dev_err(card->dev, "ioremap error\n");
return -ENXIO;
}
if (chip->msi)
if (pci_enable_msi(pci) < 0)
chip->msi = 0;
if (azx_acquire_irq(chip, 0) < 0)
return -EBUSY;
pci_set_master(pci);
synchronize_irq(chip->irq);
gcap = azx_readw(chip, GCAP);
dev_dbg(card->dev, "chipset global capabilities = 0x%x\n", gcap);
/* disable SB600 64bit support for safety */
if (chip->pci->vendor == PCI_VENDOR_ID_ATI) {
struct pci_dev *p_smbus;
p_smbus = pci_get_device(PCI_VENDOR_ID_ATI,
PCI_DEVICE_ID_ATI_SBX00_SMBUS,
NULL);
if (p_smbus) {
if (p_smbus->revision < 0x30)
gcap &= ~AZX_GCAP_64OK;
pci_dev_put(p_smbus);
}
}
/* disable 64bit DMA address on some devices */
if (chip->driver_caps & AZX_DCAPS_NO_64BIT) {
dev_dbg(card->dev, "Disabling 64bit DMA\n");
gcap &= ~AZX_GCAP_64OK;
}
/* disable buffer size rounding to 128-byte multiples if supported */
if (align_buffer_size >= 0)
chip->align_buffer_size = !!align_buffer_size;
else {
if (chip->driver_caps & AZX_DCAPS_BUFSIZE)
chip->align_buffer_size = 0;
else if (chip->driver_caps & AZX_DCAPS_ALIGN_BUFSIZE)
chip->align_buffer_size = 1;
else
chip->align_buffer_size = 1;
}
/* allow 64bit DMA address if supported by H/W */
if ((gcap & AZX_GCAP_64OK) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64)))
pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(64));
else {
pci_set_dma_mask(pci, DMA_BIT_MASK(32));
pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(32));
}
/* read number of streams from GCAP register instead of using
* hardcoded value
*/
chip->capture_streams = (gcap >> 8) & 0x0f;
chip->playback_streams = (gcap >> 12) & 0x0f;
if (!chip->playback_streams && !chip->capture_streams) {
/* gcap didn't give any info, switching to old method */
switch (chip->driver_type) {
case AZX_DRIVER_ULI:
chip->playback_streams = ULI_NUM_PLAYBACK;
chip->capture_streams = ULI_NUM_CAPTURE;
break;
case AZX_DRIVER_ATIHDMI:
case AZX_DRIVER_ATIHDMI_NS:
chip->playback_streams = ATIHDMI_NUM_PLAYBACK;
chip->capture_streams = ATIHDMI_NUM_CAPTURE;
break;
case AZX_DRIVER_GENERIC:
default:
chip->playback_streams = ICH6_NUM_PLAYBACK;
chip->capture_streams = ICH6_NUM_CAPTURE;
break;
}
}
chip->capture_index_offset = 0;
chip->playback_index_offset = chip->capture_streams;
chip->num_streams = chip->playback_streams + chip->capture_streams;
chip->azx_dev = kcalloc(chip->num_streams, sizeof(*chip->azx_dev),
GFP_KERNEL);
if (!chip->azx_dev) {
dev_err(card->dev, "cannot malloc azx_dev\n");
return -ENOMEM;
}
err = azx_alloc_stream_pages(chip);
if (err < 0)
return err;
/* initialize streams */
azx_init_stream(chip);
/* initialize chip */
azx_init_pci(chip);
if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL)
haswell_set_bclk(chip);
azx_init_chip(chip, (probe_only[dev] & 2) == 0);
/* codec detection */
if (!chip->codec_mask) {
dev_err(card->dev, "no codecs found!\n");
return -ENODEV;
}
strcpy(card->driver, "HDA-Intel");
strlcpy(card->shortname, driver_short_names[chip->driver_type],
sizeof(card->shortname));
snprintf(card->longname, sizeof(card->longname),
"%s at 0x%lx irq %i",
card->shortname, chip->addr, chip->irq);
return 0;
}
static void power_down_all_codecs(struct azx *chip)
{
#ifdef CONFIG_PM
/* The codecs were powered up in snd_hda_codec_new().
* Now all initialization done, so turn them down if possible
*/
struct hda_codec *codec;
list_for_each_entry(codec, &chip->bus->codec_list, list) {
snd_hda_power_down(codec);
}
#endif
}
#ifdef CONFIG_SND_HDA_PATCH_LOADER
/* callback from request_firmware_nowait() */
static void azx_firmware_cb(const struct firmware *fw, void *context)
{
struct snd_card *card = context;
struct azx *chip = card->private_data;
struct pci_dev *pci = chip->pci;
if (!fw) {
dev_err(card->dev, "Cannot load firmware, aborting\n");
goto error;
}
chip->fw = fw;
if (!chip->disabled) {
/* continue probing */
if (azx_probe_continue(chip))
goto error;
}
return; /* OK */
error:
snd_card_free(card);
pci_set_drvdata(pci, NULL);
}
#endif
/*
* HDA controller ops.
*/
/* PCI register access. */
static void pci_azx_writel(u32 value, u32 __iomem *addr)
{
writel(value, addr);
}
static u32 pci_azx_readl(u32 __iomem *addr)
{
return readl(addr);
}
static void pci_azx_writew(u16 value, u16 __iomem *addr)
{
writew(value, addr);
}
static u16 pci_azx_readw(u16 __iomem *addr)
{
return readw(addr);
}
static void pci_azx_writeb(u8 value, u8 __iomem *addr)
{
writeb(value, addr);
}
static u8 pci_azx_readb(u8 __iomem *addr)
{
return readb(addr);
}
static int disable_msi_reset_irq(struct azx *chip)
{
int err;
free_irq(chip->irq, chip);
chip->irq = -1;
pci_disable_msi(chip->pci);
chip->msi = 0;
err = azx_acquire_irq(chip, 1);
if (err < 0)
return err;
return 0;
}
/* DMA page allocation helpers. */
static int dma_alloc_pages(struct azx *chip,
int type,
size_t size,
struct snd_dma_buffer *buf)
{
int err;
err = snd_dma_alloc_pages(type,
chip->card->dev,
size, buf);
if (err < 0)
return err;
mark_pages_wc(chip, buf, true);
return 0;
}
static void dma_free_pages(struct azx *chip, struct snd_dma_buffer *buf)
{
mark_pages_wc(chip, buf, false);
snd_dma_free_pages(buf);
}
static int substream_alloc_pages(struct azx *chip,
struct snd_pcm_substream *substream,
size_t size)
{
struct azx_dev *azx_dev = get_azx_dev(substream);
int ret;
mark_runtime_wc(chip, azx_dev, substream, false);
azx_dev->bufsize = 0;
azx_dev->period_bytes = 0;
azx_dev->format_val = 0;
ret = snd_pcm_lib_malloc_pages(substream, size);
if (ret < 0)
return ret;
mark_runtime_wc(chip, azx_dev, substream, true);
return 0;
}
static int substream_free_pages(struct azx *chip,
struct snd_pcm_substream *substream)
{
struct azx_dev *azx_dev = get_azx_dev(substream);
mark_runtime_wc(chip, azx_dev, substream, false);
return snd_pcm_lib_free_pages(substream);
}
static void pcm_mmap_prepare(struct snd_pcm_substream *substream,
struct vm_area_struct *area)
{
#ifdef CONFIG_X86
struct azx_pcm *apcm = snd_pcm_substream_chip(substream);
struct azx *chip = apcm->chip;
if (!azx_snoop(chip))
area->vm_page_prot = pgprot_writecombine(area->vm_page_prot);
#endif
}
static const struct hda_controller_ops pci_hda_ops = {
.reg_writel = pci_azx_writel,
.reg_readl = pci_azx_readl,
.reg_writew = pci_azx_writew,
.reg_readw = pci_azx_readw,
.reg_writeb = pci_azx_writeb,
.reg_readb = pci_azx_readb,
.disable_msi_reset_irq = disable_msi_reset_irq,
.dma_alloc_pages = dma_alloc_pages,
.dma_free_pages = dma_free_pages,
.substream_alloc_pages = substream_alloc_pages,
.substream_free_pages = substream_free_pages,
.pcm_mmap_prepare = pcm_mmap_prepare,
.position_check = azx_position_check,
};
static int azx_probe(struct pci_dev *pci,
const struct pci_device_id *pci_id)
{
static int dev;
struct snd_card *card;
struct hda_intel *hda;
struct azx *chip;
bool schedule_probe;
int err;
if (dev >= SNDRV_CARDS)
return -ENODEV;
if (!enable[dev]) {
dev++;
return -ENOENT;
}
err = snd_card_new(&pci->dev, index[dev], id[dev], THIS_MODULE,
0, &card);
if (err < 0) {
dev_err(&pci->dev, "Error creating card!\n");
return err;
}
err = azx_create(card, pci, dev, pci_id->driver_data,
&pci_hda_ops, &chip);
if (err < 0)
goto out_free;
card->private_data = chip;
hda = container_of(chip, struct hda_intel, chip);
pci_set_drvdata(pci, card);
err = register_vga_switcheroo(chip);
if (err < 0) {
dev_err(card->dev, "Error registering VGA-switcheroo client\n");
goto out_free;
}
if (check_hdmi_disabled(pci)) {
dev_info(card->dev, "VGA controller is disabled\n");
dev_info(card->dev, "Delaying initialization\n");
chip->disabled = true;
}
schedule_probe = !chip->disabled;
#ifdef CONFIG_SND_HDA_PATCH_LOADER
if (patch[dev] && *patch[dev]) {
dev_info(card->dev, "Applying patch firmware '%s'\n",
patch[dev]);
err = request_firmware_nowait(THIS_MODULE, true, patch[dev],
&pci->dev, GFP_KERNEL, card,
azx_firmware_cb);
if (err < 0)
goto out_free;
schedule_probe = false; /* continued in azx_firmware_cb() */
}
#endif /* CONFIG_SND_HDA_PATCH_LOADER */
#ifndef CONFIG_SND_HDA_I915
if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL)
dev_err(card->dev, "Haswell must build in CONFIG_SND_HDA_I915\n");
#endif
if (schedule_probe)
schedule_work(&hda->probe_work);
dev++;
if (chip->disabled)
complete_all(&hda->probe_wait);
return 0;
out_free:
snd_card_free(card);
return err;
}
/* number of codec slots for each chipset: 0 = default slots (i.e. 4) */
static unsigned int azx_max_codecs[AZX_NUM_DRIVERS] = {
[AZX_DRIVER_NVIDIA] = 8,
[AZX_DRIVER_TERA] = 1,
};
static int azx_probe_continue(struct azx *chip)
{
struct hda_intel *hda = container_of(chip, struct hda_intel, chip);
struct pci_dev *pci = chip->pci;
int dev = chip->dev_index;
int err;
/* Request power well for Haswell HDA controller and codec */
if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL) {
#ifdef CONFIG_SND_HDA_I915
err = hda_i915_init();
if (err < 0) {
dev_err(chip->card->dev,
"Error request power-well from i915\n");
goto out_free;
}
err = hda_display_power(true);
if (err < 0) {
dev_err(chip->card->dev,
"Cannot turn on display power on i915\n");
goto out_free;
}
#endif
}
err = azx_first_init(chip);
if (err < 0)
goto out_free;
#ifdef CONFIG_SND_HDA_INPUT_BEEP
chip->beep_mode = beep_mode[dev];
#endif
/* create codec instances */
err = azx_codec_create(chip, model[dev],
azx_max_codecs[chip->driver_type],
power_save_addr);
if (err < 0)
goto out_free;
#ifdef CONFIG_SND_HDA_PATCH_LOADER
if (chip->fw) {
err = snd_hda_load_patch(chip->bus, chip->fw->size,
chip->fw->data);
if (err < 0)
goto out_free;
#ifndef CONFIG_PM
release_firmware(chip->fw); /* no longer needed */
chip->fw = NULL;
#endif
}
#endif
if ((probe_only[dev] & 1) == 0) {
err = azx_codec_configure(chip);
if (err < 0)
goto out_free;
}
/* create PCM streams */
err = snd_hda_build_pcms(chip->bus);
if (err < 0)
goto out_free;
/* create mixer controls */
err = azx_mixer_create(chip);
if (err < 0)
goto out_free;
err = snd_card_register(chip->card);
if (err < 0)
goto out_free;
chip->running = 1;
power_down_all_codecs(chip);
azx_notifier_register(chip);
azx_add_card_list(chip);
if ((chip->driver_caps & AZX_DCAPS_PM_RUNTIME) || hda->use_vga_switcheroo)
pm_runtime_put_noidle(&pci->dev);
out_free:
if (err < 0)
hda->init_failed = 1;
complete_all(&hda->probe_wait);
return err;
}
static void azx_remove(struct pci_dev *pci)
{
struct snd_card *card = pci_get_drvdata(pci);
ALSA: hda - add runtime PM support Runtime PM can bring more power saving: - When the controller is suspended, its parent device will also have a chance to suspend. - PCI subsystem can choose the lowest power state the controller can signal wake up from. This state can be D3cold on platforms with ACPI PM support. And runtime PM can provide a gerneral sysfs interface for a system policy manager. Runtime PM support is based on current HDA power saving implementation. The user can enable runtime PM on platfroms that provide acceptable latency on transition from D3 to D0. Details: - When both power saving and runtime PM are enabled: -- If a codec supports 'stop-clock' in D3, it will request suspending the controller after it enters D3 and request resuming the controller before back to D0. Thus the controller will be suspended only when all codecs are suspended and support stop-clock in D3. -- User IO operations and HW wakeup signal can resume the controller back to D0. - If runtime PM is disabled, power saving just works as before. - If power saving is disabled, the controller won't be suspended because the power usage counter can never be 0. More about 'stop-clock' feature: If a codec can support targeted pass-through operations in D3 state when there is no BCLK present on the link, it will set CLKSTOP flag in the supported power states and report PS-ClkStopOk when entering D3 state. Please refer to HDA spec section 7.3.3.10 Power state and 7.3.4.12 Supported Power State. [Fixed CONFIG_PM_RUNTIME dependency in hda_intel.c by tiwai] Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-23 09:32:30 +00:00
if (card)
snd_card_free(card);
}
/* PCI IDs */
static const struct pci_device_id azx_ids[] = {
/* CPT */
{ PCI_DEVICE(0x8086, 0x1c20),
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH_NOPM },
/* PBG */
{ PCI_DEVICE(0x8086, 0x1d20),
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH_NOPM },
/* Panther Point */
{ PCI_DEVICE(0x8086, 0x1e20),
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
/* Lynx Point */
{ PCI_DEVICE(0x8086, 0x8c20),
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
/* 9 Series */
{ PCI_DEVICE(0x8086, 0x8ca0),
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
/* Wellsburg */
{ PCI_DEVICE(0x8086, 0x8d20),
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
{ PCI_DEVICE(0x8086, 0x8d21),
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
/* Lynx Point-LP */
{ PCI_DEVICE(0x8086, 0x9c20),
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
/* Lynx Point-LP */
{ PCI_DEVICE(0x8086, 0x9c21),
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
/* Wildcat Point-LP */
{ PCI_DEVICE(0x8086, 0x9ca0),
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
/* Sunrise Point */
{ PCI_DEVICE(0x8086, 0xa170),
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
/* Haswell */
{ PCI_DEVICE(0x8086, 0x0a0c),
.driver_data = AZX_DRIVER_HDMI | AZX_DCAPS_INTEL_HASWELL },
{ PCI_DEVICE(0x8086, 0x0c0c),
.driver_data = AZX_DRIVER_HDMI | AZX_DCAPS_INTEL_HASWELL },
{ PCI_DEVICE(0x8086, 0x0d0c),
.driver_data = AZX_DRIVER_HDMI | AZX_DCAPS_INTEL_HASWELL },
/* Broadwell */
{ PCI_DEVICE(0x8086, 0x160c),
.driver_data = AZX_DRIVER_HDMI | AZX_DCAPS_INTEL_BROADWELL },
/* 5 Series/3400 */
{ PCI_DEVICE(0x8086, 0x3b56),
.driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_NOPM },
/* Poulsbo */
{ PCI_DEVICE(0x8086, 0x811b),
.driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_NOPM },
/* Oaktrail */
{ PCI_DEVICE(0x8086, 0x080a),
.driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_NOPM },
/* BayTrail */
{ PCI_DEVICE(0x8086, 0x0f04),
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH_NOPM },
/* Braswell */
{ PCI_DEVICE(0x8086, 0x2284),
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
/* ICH */
{ PCI_DEVICE(0x8086, 0x2668),
.driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC |
AZX_DCAPS_BUFSIZE }, /* ICH6 */
{ PCI_DEVICE(0x8086, 0x27d8),
.driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC |
AZX_DCAPS_BUFSIZE }, /* ICH7 */
{ PCI_DEVICE(0x8086, 0x269a),
.driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC |
AZX_DCAPS_BUFSIZE }, /* ESB2 */
{ PCI_DEVICE(0x8086, 0x284b),
.driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC |
AZX_DCAPS_BUFSIZE }, /* ICH8 */
{ PCI_DEVICE(0x8086, 0x293e),
.driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC |
AZX_DCAPS_BUFSIZE }, /* ICH9 */
{ PCI_DEVICE(0x8086, 0x293f),
.driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC |
AZX_DCAPS_BUFSIZE }, /* ICH9 */
{ PCI_DEVICE(0x8086, 0x3a3e),
.driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC |
AZX_DCAPS_BUFSIZE }, /* ICH10 */
{ PCI_DEVICE(0x8086, 0x3a6e),
.driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC |
AZX_DCAPS_BUFSIZE }, /* ICH10 */
/* Generic Intel */
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_ANY_ID),
.class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
.class_mask = 0xffffff,
.driver_data = AZX_DRIVER_ICH | AZX_DCAPS_BUFSIZE },
/* ATI SB 450/600/700/800/900 */
{ PCI_DEVICE(0x1002, 0x437b),
.driver_data = AZX_DRIVER_ATI | AZX_DCAPS_PRESET_ATI_SB },
{ PCI_DEVICE(0x1002, 0x4383),
.driver_data = AZX_DRIVER_ATI | AZX_DCAPS_PRESET_ATI_SB },
/* AMD Hudson */
{ PCI_DEVICE(0x1022, 0x780d),
.driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_ATI_SB },
/* ATI HDMI */
{ PCI_DEVICE(0x1002, 0x793b),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0x7919),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0x960f),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0x970f),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaa00),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaa08),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaa10),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaa18),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaa20),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaa28),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaa30),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaa38),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaa40),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaa48),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaa50),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaa58),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaa60),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaa68),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaa80),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaa88),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaa90),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaa98),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0x9902),
.driver_data = AZX_DRIVER_ATIHDMI_NS | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaaa0),
.driver_data = AZX_DRIVER_ATIHDMI_NS | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaaa8),
.driver_data = AZX_DRIVER_ATIHDMI_NS | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaab0),
.driver_data = AZX_DRIVER_ATIHDMI_NS | AZX_DCAPS_PRESET_ATI_HDMI },
/* VIA VT8251/VT8237A */
{ PCI_DEVICE(0x1106, 0x3288),
.driver_data = AZX_DRIVER_VIA | AZX_DCAPS_POSFIX_VIA },
/* VIA GFX VT7122/VX900 */
{ PCI_DEVICE(0x1106, 0x9170), .driver_data = AZX_DRIVER_GENERIC },
/* VIA GFX VT6122/VX11 */
{ PCI_DEVICE(0x1106, 0x9140), .driver_data = AZX_DRIVER_GENERIC },
/* SIS966 */
{ PCI_DEVICE(0x1039, 0x7502), .driver_data = AZX_DRIVER_SIS },
/* ULI M5461 */
{ PCI_DEVICE(0x10b9, 0x5461), .driver_data = AZX_DRIVER_ULI },
/* NVIDIA MCP */
{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID),
.class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
.class_mask = 0xffffff,
.driver_data = AZX_DRIVER_NVIDIA | AZX_DCAPS_PRESET_NVIDIA },
/* Teradici */
{ PCI_DEVICE(0x6549, 0x1200),
.driver_data = AZX_DRIVER_TERA | AZX_DCAPS_NO_64BIT },
{ PCI_DEVICE(0x6549, 0x2200),
.driver_data = AZX_DRIVER_TERA | AZX_DCAPS_NO_64BIT },
/* Creative X-Fi (CA0110-IBG) */
/* CTHDA chips */
{ PCI_DEVICE(0x1102, 0x0010),
.driver_data = AZX_DRIVER_CTHDA | AZX_DCAPS_PRESET_CTHDA },
{ PCI_DEVICE(0x1102, 0x0012),
.driver_data = AZX_DRIVER_CTHDA | AZX_DCAPS_PRESET_CTHDA },
#if !IS_ENABLED(CONFIG_SND_CTXFI)
/* the following entry conflicts with snd-ctxfi driver,
* as ctxfi driver mutates from HD-audio to native mode with
* a special command sequence.
*/
{ PCI_DEVICE(PCI_VENDOR_ID_CREATIVE, PCI_ANY_ID),
.class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
.class_mask = 0xffffff,
.driver_data = AZX_DRIVER_CTX | AZX_DCAPS_CTX_WORKAROUND |
AZX_DCAPS_RIRB_PRE_DELAY | AZX_DCAPS_POSFIX_LPIB },
#else
/* this entry seems still valid -- i.e. without emu20kx chip */
{ PCI_DEVICE(0x1102, 0x0009),
.driver_data = AZX_DRIVER_CTX | AZX_DCAPS_CTX_WORKAROUND |
AZX_DCAPS_RIRB_PRE_DELAY | AZX_DCAPS_POSFIX_LPIB },
#endif
/* CM8888 */
{ PCI_DEVICE(0x13f6, 0x5011),
.driver_data = AZX_DRIVER_CMEDIA |
AZX_DCAPS_NO_MSI | AZX_DCAPS_POSFIX_LPIB },
/* Vortex86MX */
{ PCI_DEVICE(0x17f3, 0x3010), .driver_data = AZX_DRIVER_GENERIC },
/* VMware HDAudio */
{ PCI_DEVICE(0x15ad, 0x1977), .driver_data = AZX_DRIVER_GENERIC },
/* AMD/ATI Generic, PCI class code and Vendor ID for HD Audio */
{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_ANY_ID),
.class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
.class_mask = 0xffffff,
.driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_ANY_ID),
.class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
.class_mask = 0xffffff,
.driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_ATI_HDMI },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, azx_ids);
/* pci_driver definition */
static struct pci_driver azx_driver = {
.name = KBUILD_MODNAME,
.id_table = azx_ids,
.probe = azx_probe,
.remove = azx_remove,
.driver = {
.pm = AZX_PM_OPS,
},
};
module_pci_driver(azx_driver);