leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
055223d4d2
linux/arch/arm/boot/dts/omap2420.dtsi

217 lines
4.5 KiB
Plaintext
Raw Normal View History

ARM: dts: omap2: Add McBSP entries for OMAP2420 and OMAP2430 SoC The McBSP IP within OMAP2420 and 2430 is different we need to create separate dtsi files for them. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-07-26 14:01:32 +00:00
/*
* Device Tree Source for OMAP2420 SoC
*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
ARM: dts: OMAP2+: Use #include for all device trees Replace /include/ by #include for OMAP2+ DT, in order to use the C pre-processor, making use of #define features possible. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-05-31 12:32:55 +00:00
#include "omap2.dtsi"
ARM: dts: omap2: Add McBSP entries for OMAP2420 and OMAP2430 SoC The McBSP IP within OMAP2420 and 2430 is different we need to create separate dtsi files for them. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-07-26 14:01:32 +00:00
/ {
compatible = "ti,omap2420", "ti,omap2";
ocp {
ARM: dts: omap24xx: add minimal l4 bus layout with control module support This patch creates an l4 / l4-wkup interconnects for omap2420 / omap2430 SoCs, and moves some of the generic peripherals under it. System control module nodes are moved under this new interconnect also, and the SCM clock layout is changed to use the new SCM node as the clock provider. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-02-12 08:38:16 +00:00
l4: l4@48000000 {
compatible = "ti,omap2-l4", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x48000000 0x100000>;
ARM: dts: omap2 clock data This patch creates a unique node for each clock in the OMAP2 power, reset and clock manager (PRCM). Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-02-21 15:05:02 +00:00
ARM: dts: omap24xx: add minimal l4 bus layout with control module support This patch creates an l4 / l4-wkup interconnects for omap2420 / omap2430 SoCs, and moves some of the generic peripherals under it. System control module nodes are moved under this new interconnect also, and the SCM clock layout is changed to use the new SCM node as the clock provider. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-02-12 08:38:16 +00:00
prcm: prcm@8000 {
compatible = "ti,omap2-prcm";
reg = <0x8000 0x1000>;
ARM: dts: omap2 clock data This patch creates a unique node for each clock in the OMAP2 power, reset and clock manager (PRCM). Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-02-21 15:05:02 +00:00
ARM: dts: omap24xx: add minimal l4 bus layout with control module support This patch creates an l4 / l4-wkup interconnects for omap2420 / omap2430 SoCs, and moves some of the generic peripherals under it. System control module nodes are moved under this new interconnect also, and the SCM clock layout is changed to use the new SCM node as the clock provider. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-02-12 08:38:16 +00:00
prcm_clocks: clocks {
#address-cells = <1>;
#size-cells = <0>;
};
ARM: dts: omap2 clock data This patch creates a unique node for each clock in the OMAP2 power, reset and clock manager (PRCM). Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-02-21 15:05:02 +00:00
ARM: dts: omap24xx: add minimal l4 bus layout with control module support This patch creates an l4 / l4-wkup interconnects for omap2420 / omap2430 SoCs, and moves some of the generic peripherals under it. System control module nodes are moved under this new interconnect also, and the SCM clock layout is changed to use the new SCM node as the clock provider. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-02-12 08:38:16 +00:00
prcm_clockdomains: clockdomains {
};
};
ARM: dts: omap2 clock data This patch creates a unique node for each clock in the OMAP2 power, reset and clock manager (PRCM). Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-02-21 15:05:02 +00:00
ARM: dts: omap24xx: add minimal l4 bus layout with control module support This patch creates an l4 / l4-wkup interconnects for omap2420 / omap2430 SoCs, and moves some of the generic peripherals under it. System control module nodes are moved under this new interconnect also, and the SCM clock layout is changed to use the new SCM node as the clock provider. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-02-12 08:38:16 +00:00
scm: scm@0 {
compatible = "ti,omap2-scm", "simple-bus";
reg = <0x0 0x1000>;
ARM: dts: omap2 clock data This patch creates a unique node for each clock in the OMAP2 power, reset and clock manager (PRCM). Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-02-21 15:05:02 +00:00
#address-cells = <1>;
ARM: dts: omap24xx: add minimal l4 bus layout with control module support This patch creates an l4 / l4-wkup interconnects for omap2420 / omap2430 SoCs, and moves some of the generic peripherals under it. System control module nodes are moved under this new interconnect also, and the SCM clock layout is changed to use the new SCM node as the clock provider. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-02-12 08:38:16 +00:00
#size-cells = <1>;
ranges = <0 0x0 0x1000>;
ARM: dts: omap2 clock data This patch creates a unique node for each clock in the OMAP2 power, reset and clock manager (PRCM). Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-02-21 15:05:02 +00:00
ARM: dts: omap24xx: add minimal l4 bus layout with control module support This patch creates an l4 / l4-wkup interconnects for omap2420 / omap2430 SoCs, and moves some of the generic peripherals under it. System control module nodes are moved under this new interconnect also, and the SCM clock layout is changed to use the new SCM node as the clock provider. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-02-12 08:38:16 +00:00
omap2420_pmx: pinmux@30 {
compatible = "ti,omap2420-padconf",
"pinctrl-single";
reg = <0x30 0x0113>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-single,register-width = <8>;
pinctrl-single,function-mask = <0x3f>;
};
ARM: dts: omap2 clock data This patch creates a unique node for each clock in the OMAP2 power, reset and clock manager (PRCM). Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-02-21 15:05:02 +00:00
ARM: dts: omap24xx: add minimal l4 bus layout with control module support This patch creates an l4 / l4-wkup interconnects for omap2420 / omap2430 SoCs, and moves some of the generic peripherals under it. System control module nodes are moved under this new interconnect also, and the SCM clock layout is changed to use the new SCM node as the clock provider. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-02-12 08:38:16 +00:00
scm_conf: scm_conf@270 {
compatible = "syscon";
reg = <0x270 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ARM: dts: OMAP: Add counter-32k nodes Adds the counter-32k timers nodes present in OMAP2/3/4 devices and device-tree binding documentation for OMAP counter-32k. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-25 19:24:14 +00:00
ARM: dts: omap24xx: add minimal l4 bus layout with control module support This patch creates an l4 / l4-wkup interconnects for omap2420 / omap2430 SoCs, and moves some of the generic peripherals under it. System control module nodes are moved under this new interconnect also, and the SCM clock layout is changed to use the new SCM node as the clock provider. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-02-12 08:38:16 +00:00
scm_clocks: clocks {
#address-cells = <1>;
#size-cells = <0>;
};
};
scm_clockdomains: clockdomains {
};
};
counter32k: counter@4000 {
compatible = "ti,omap-counter32k";
reg = <0x4000 0x20>;
ti,hwmods = "counter_32k";
};
arm/dts: Add pinctrl driver entries for omap2/3/4 Add pinctrl driver entries for omap2+. These all use the generic pinctrl-single driver for the padconf registers. Cc: devicetree-discuss@lists.ozlabs.org Acked-by: Linus Walleij <linus.walleij@linaro.org> [tony@atomide.com: updated to drop omap2420.dtsi rename changes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-10 17:34:51 +00:00
};
ARM: dts: Add OMAP2 gpio bindings Add gpios bindings for OMAP2420 and OMAP2430 devices. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-02-28 21:32:00 +00:00
gpio1: gpio@48018000 {
compatible = "ti,omap2-gpio";
reg = <0x48018000 0x200>;
interrupts = <29>;
ti,hwmods = "gpio1";
ARM: dts: OMAP2+: Identify GPIO banks that are always powered Add the "ti,gpio-always-on" property to the appropriate GPIO banks to indicate which banks are always powered and will never lose logic state. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-04-04 20:16:16 +00:00
ti,gpio-always-on;
ARM: dts: Add OMAP2 gpio bindings Add gpios bindings for OMAP2420 and OMAP2430 devices. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-02-28 21:32:00 +00:00
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio2: gpio@4801a000 {
compatible = "ti,omap2-gpio";
reg = <0x4801a000 0x200>;
interrupts = <30>;
ti,hwmods = "gpio2";
ARM: dts: OMAP2+: Identify GPIO banks that are always powered Add the "ti,gpio-always-on" property to the appropriate GPIO banks to indicate which banks are always powered and will never lose logic state. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-04-04 20:16:16 +00:00
ti,gpio-always-on;
ARM: dts: Add OMAP2 gpio bindings Add gpios bindings for OMAP2420 and OMAP2430 devices. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-02-28 21:32:00 +00:00
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio3: gpio@4801c000 {
compatible = "ti,omap2-gpio";
reg = <0x4801c000 0x200>;
interrupts = <31>;
ti,hwmods = "gpio3";
ARM: dts: OMAP2+: Identify GPIO banks that are always powered Add the "ti,gpio-always-on" property to the appropriate GPIO banks to indicate which banks are always powered and will never lose logic state. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-04-04 20:16:16 +00:00
ti,gpio-always-on;
ARM: dts: Add OMAP2 gpio bindings Add gpios bindings for OMAP2420 and OMAP2430 devices. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-02-28 21:32:00 +00:00
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio4: gpio@4801e000 {
compatible = "ti,omap2-gpio";
reg = <0x4801e000 0x200>;
interrupts = <32>;
ti,hwmods = "gpio4";
ARM: dts: OMAP2+: Identify GPIO banks that are always powered Add the "ti,gpio-always-on" property to the appropriate GPIO banks to indicate which banks are always powered and will never lose logic state. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-04-04 20:16:16 +00:00
ti,gpio-always-on;
ARM: dts: Add OMAP2 gpio bindings Add gpios bindings for OMAP2420 and OMAP2430 devices. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-02-28 21:32:00 +00:00
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
};
ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5 Add the device-tree node for GPMC on OMAP2, OMAP4 and OMAP5 devices. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-02-22 21:33:31 +00:00
gpmc: gpmc@6800a000 {
compatible = "ti,omap2420-gpmc";
reg = <0x6800a000 0x1000>;
#address-cells = <2>;
#size-cells = <1>;
interrupts = <20>;
gpmc,num-cs = <8>;
gpmc,num-waitpins = <4>;
ti,hwmods = "gpmc";
};
ARM: dts: omap2: Add McBSP entries for OMAP2420 and OMAP2430 SoC The McBSP IP within OMAP2420 and 2430 is different we need to create separate dtsi files for them. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-07-26 14:01:32 +00:00
mcbsp1: mcbsp@48074000 {
compatible = "ti,omap2420-mcbsp";
reg = <0x48074000 0xff>;
reg-names = "mpu";
interrupts = <59>, /* TX interrupt */
<60>; /* RX interrupt */
interrupt-names = "tx", "rx";
ti,hwmods = "mcbsp1";
ARM: dts: OMAP2+: Add SDMA Audio IPs bindings Populate DMA client information for McBSP DMIC and McPDM periperhal on OMAP2+ devices. Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-03-11 07:50:21 +00:00
dmas = <&sdma 31>,
<&sdma 32>;
dma-names = "tx", "rx";
ARM: dts: omap2: Set disabled status for McBSP instances as default state In omap2420.dtsi and omap2430.dtsi disable all mcbsp nodes and board dts files can explicitly enable the mcbsp they are using. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-01-24 08:19:06 +00:00
status = "disabled";
ARM: dts: omap2: Add McBSP entries for OMAP2420 and OMAP2430 SoC The McBSP IP within OMAP2420 and 2430 is different we need to create separate dtsi files for them. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-07-26 14:01:32 +00:00
};
mcbsp2: mcbsp@48076000 {
compatible = "ti,omap2420-mcbsp";
reg = <0x48076000 0xff>;
reg-names = "mpu";
interrupts = <62>, /* TX interrupt */
<63>; /* RX interrupt */
interrupt-names = "tx", "rx";
ti,hwmods = "mcbsp2";
ARM: dts: OMAP2+: Add SDMA Audio IPs bindings Populate DMA client information for McBSP DMIC and McPDM periperhal on OMAP2+ devices. Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-03-11 07:50:21 +00:00
dmas = <&sdma 33>,
<&sdma 34>;
dma-names = "tx", "rx";
ARM: dts: omap2: Set disabled status for McBSP instances as default state In omap2420.dtsi and omap2430.dtsi disable all mcbsp nodes and board dts files can explicitly enable the mcbsp they are using. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-01-24 08:19:06 +00:00
status = "disabled";
ARM: dts: omap2: Add McBSP entries for OMAP2420 and OMAP2430 SoC The McBSP IP within OMAP2420 and 2430 is different we need to create separate dtsi files for them. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-07-26 14:01:32 +00:00
};
ARM: dts: OMAP: Add timer nodes Add the 12 GP timers nodes present in OMAP2. Add the 12 GP timers nodes present in OMAP3. Add the 11 GP timers nodes present in OMAP4. Add the 7 GP timers nodes present in AM33xx. Add documentation for timer properties specific to OMAP. Thanks to Vaibhav Hiremath for creating the AM33xx timer nodes. I have modified Vaibhav's original nodes adding information on which timers support a PWM output. V5 changes: - Updated timer register sizes for OMAP2/3/4. - Modified AM335x timer register size to be 1KB instead of 4KB to align with HWMOD. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-Reviewed-&-Tested-By: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-19 14:59:00 +00:00
ARM: dts: Fix omap2 specific dtsi files by adding the missing entries Looks like we're missing few entries for omap2 and the drivers have only worked because of the omap hwmod building the devices for the missing entries. Let's fix the missing entries so we don't need to rely on hwmod for the basic data and can then later on remove the duplicate data from hwmod. Otherwise device tree only drivers will not work properly. Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-14 23:25:09 +00:00
msdi1: mmc@4809c000 {
compatible = "ti,omap2420-mmc";
ti,hwmods = "msdi1";
reg = <0x4809c000 0x80>;
interrupts = <83>;
dmas = <&sdma 61 &sdma 62>;
dma-names = "tx", "rx";
};
ARM: dts: OMAP2: Fix interrupts for OMAP2420 mailbox The mailbox module is capable of generating two interrupts to MPU in OMAP2420, compared to one in OMAP2430. The second interrupt is to handle interrupts from the additional IVA processor present only on OMAP2420. Move the current common mailbox DT node into the SoC specific files to allow the above differentiation. Also, added back the interrupt-names on OMAP2420, that were previously defined in hwmod data. This fixes regression caused by the recent dropping of hwmod data in favor for defining it in the .dts files. Signed-off-by: Suman Anna <s-anna@ti.com> [tony@atomide.com: updated description] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-04-22 22:23:36 +00:00
mailbox: mailbox@48094000 {
compatible = "ti,omap2-mailbox";
reg = <0x48094000 0x200>;
interrupts = <26>, <34>;
interrupt-names = "dsp", "iva";
ti,hwmods = "mailbox";
ARM: dts: OMAP2+: Add #mbox-cells property to all mailbox nodes The '#mbox-cells' property is added to all the OMAP mailbox nodes. This property is mandatory with the new mailbox framework. Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-03 23:07:35 +00:00
#mbox-cells = <1>;
ARM: dts: OMAP2+: Add mailbox fifo and user information The number of mailbox fifos and users (IP interrupts) are added to the Mailbox DT nodes on OMAP2420, OMAP2430, OMAP3, and OMAP5 family of SoCs through the DT properties "ti,mbox-num-fifos" and "ti,mbox-num-users" properties. This data represents the same data that used to be represented in hwmod attribute data through the .num_fifos and .num_users fields previously. Signed-off-by: Suman Anna <s-anna@ti.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-11 21:44:34 +00:00
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <6>;
ARM: dts: OMAP2+: Add sub mailboxes device node information The sub-mailbox devices are added to the Mailbox DT nodes on OMAP2420, OMAP2430, OMAP3, AM33xx, AM43xx, OMAP4 and OMAP5 family of SoCs. This data represents the same mailboxes that used to be represented in hwmod attribute data previously. The node name is chosen based on the .name field of omap_mbox_dev_info structure used in the hwmod data. Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-10 19:27:23 +00:00
mbox_dsp: dsp {
ti,mbox-tx = <0 0 0>;
ti,mbox-rx = <1 0 0>;
};
mbox_iva: iva {
ti,mbox-tx = <2 1 3>;
ti,mbox-rx = <3 1 3>;
};
ARM: dts: OMAP2: Fix interrupts for OMAP2420 mailbox The mailbox module is capable of generating two interrupts to MPU in OMAP2420, compared to one in OMAP2430. The second interrupt is to handle interrupts from the additional IVA processor present only on OMAP2420. Move the current common mailbox DT node into the SoC specific files to allow the above differentiation. Also, added back the interrupt-names on OMAP2420, that were previously defined in hwmod data. This fixes regression caused by the recent dropping of hwmod data in favor for defining it in the .dts files. Signed-off-by: Suman Anna <s-anna@ti.com> [tony@atomide.com: updated description] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-04-22 22:23:36 +00:00
};
ARM: dts: OMAP: Add timer nodes Add the 12 GP timers nodes present in OMAP2. Add the 12 GP timers nodes present in OMAP3. Add the 11 GP timers nodes present in OMAP4. Add the 7 GP timers nodes present in AM33xx. Add documentation for timer properties specific to OMAP. Thanks to Vaibhav Hiremath for creating the AM33xx timer nodes. I have modified Vaibhav's original nodes adding information on which timers support a PWM output. V5 changes: - Updated timer register sizes for OMAP2/3/4. - Modified AM335x timer register size to be 1KB instead of 4KB to align with HWMOD. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-Reviewed-&-Tested-By: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-19 14:59:00 +00:00
timer1: timer@48028000 {
ARM: dts: OMAP2+: Update DMTIMER compatibility property Update the DMTIMER compatibility property to reflect the register level compatibilty between devices and update the various OMAP/AM timer bindings with the appropriate compatibility string. By doing this we can add platform specific data applicable to specific timer versions to the driver. For example, errata flags can be populated for the timer versions that are impacted. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-03-19 17:38:18 +00:00
compatible = "ti,omap2420-timer";
ARM: dts: OMAP: Add timer nodes Add the 12 GP timers nodes present in OMAP2. Add the 12 GP timers nodes present in OMAP3. Add the 11 GP timers nodes present in OMAP4. Add the 7 GP timers nodes present in AM33xx. Add documentation for timer properties specific to OMAP. Thanks to Vaibhav Hiremath for creating the AM33xx timer nodes. I have modified Vaibhav's original nodes adding information on which timers support a PWM output. V5 changes: - Updated timer register sizes for OMAP2/3/4. - Modified AM335x timer register size to be 1KB instead of 4KB to align with HWMOD. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-Reviewed-&-Tested-By: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-19 14:59:00 +00:00
reg = <0x48028000 0x400>;
interrupts = <37>;
ti,hwmods = "timer1";
ti,timer-alwon;
};
ARM: dts: Fix omap2 specific dtsi files by adding the missing entries Looks like we're missing few entries for omap2 and the drivers have only worked because of the omap hwmod building the devices for the missing entries. Let's fix the missing entries so we don't need to rely on hwmod for the basic data and can then later on remove the duplicate data from hwmod. Otherwise device tree only drivers will not work properly. Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-14 23:25:09 +00:00
wd_timer2: wdt@48022000 {
compatible = "ti,omap2-wdt";
ti,hwmods = "wd_timer2";
reg = <0x48022000 0x80>;
};
ARM: dts: omap2: Add McBSP entries for OMAP2420 and OMAP2430 SoC The McBSP IP within OMAP2420 and 2430 is different we need to create separate dtsi files for them. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-07-26 14:01:32 +00:00
};
};
ARM: dts: Fix omap2 specific dtsi files by adding the missing entries Looks like we're missing few entries for omap2 and the drivers have only worked because of the omap hwmod building the devices for the missing entries. Let's fix the missing entries so we don't need to rely on hwmod for the basic data and can then later on remove the duplicate data from hwmod. Otherwise device tree only drivers will not work properly. Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-14 23:25:09 +00:00
&i2c1 {
compatible = "ti,omap2420-i2c";
};
&i2c2 {
compatible = "ti,omap2420-i2c";
};
ARM: OMAP2: clock: use DT clock boot if available Otherwise legacy boot clock data is used. This patch also includes the clock data files to the base dtsi files. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-02-24 16:51:05 +00:00
/include/ "omap24xx-clocks.dtsi"
/include/ "omap2420-clocks.dtsi"
Reference in New Issue Copy Permalink