linux/arch/arm/mach-omap2
Tony Lindgren e92fc4f04a ARM: OMAP2+: Drop legacy board file for LDP
Let's drop the last two remaining omap3 legacy boot board files.
Let's only use the device tree based booting known to work for
these two boards.

We still have two omap3 boards booting in legacy mode in addition
to device tree based booting. All the other ten or so omap2+ SoCs
have been booting using device tree mode only for years now. This
has allowed us to get rid of quite a bit of arch/arm/mach-omap2
related platform init code in favor of dts and driver changes.

Pretty much the only remaining known users for omap3 legacy boot
board files are Kevin's and Russell's boot test systems, and N900
kernel tree maintained by Pali and Ivaylo. And all of them are
also supporting the device tree based booting. The legacy booting
mode has been kept around mostly to verify against regressions.

As there is still a slim chance of possible other uses of the
mainline kernel for these boards, let's just drop the board
files for v4.8, and let's not touch the related platform init
code until around v4.9 time if no issues are found. This makes
it trivial for us to add back the board files with a simple revert.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-07-10 23:47:38 -07:00
..
include/mach ARM: omap2: restore OMAP4 barrier behaviour 2015-07-25 15:28:16 +01:00
am33xx-restart.c ARM: OMAP2+: PRM: provide generic API for system reset 2014-10-27 08:39:26 -07:00
am33xx.h
board-flash.c ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header 2014-11-20 12:11:25 -08:00
board-flash.h ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header 2014-11-20 12:11:25 -08:00
board-generic.c ARM: OMAP2+: Set system_rev from ATAGS for n900 2016-02-10 16:17:15 -08:00
board-n8x0.c ARM: SoC/OMAP GPMC driver cleanup and move for 3.19 2014-12-09 16:57:56 -08:00
clkt2xxx_dpll.c
clkt2xxx_dpllcore.c ARM: OMAP2+: raw read and write endian fix 2014-05-08 07:09:53 -07:00
clkt2xxx_virt_prcm_set.c ARM: omap2: use clkdev_create() 2015-05-06 11:58:58 +01:00
clock2xxx.h ARM: OMAP2: clock: remove unused apll code 2015-01-07 10:54:40 -08:00
clock3xxx.h CLK: TI: add omap3 clock init file 2014-01-17 12:35:48 -08:00
clock.c clk: ti: omap5+: dpll: implement errata i810 2015-11-30 11:34:17 -08:00
clock.h clk: ti: move low-level access and init code under clock driver 2015-06-02 12:31:46 +03:00
clockdomain.c
clockdomain.h ARM: OMAP2+: Add minimal clockdomains for dm814x 2015-07-16 02:09:33 -07:00
clockdomains2xxx_3xxx_data.c
clockdomains3xxx_data.c ARM: OMAP3: fix iva mmu programming issues 2014-03-12 09:48:26 -07:00
clockdomains7xx_data.c ARM: DRA7: clockdomain: Implement timer workaround for errata i874 2016-04-10 11:43:57 -06:00
clockdomains33xx_data.c
clockdomains43xx_data.c ARM: OMAP2+: CM: AM43x clockdomain data 2013-10-13 22:48:36 -06:00
clockdomains44xx_data.c
clockdomains54xx_data.c
clockdomains81xx_data.c ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx 2015-12-22 16:23:08 -08:00
clockdomains2420_data.c
clockdomains2430_data.c
cm1_7xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm1_44xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm1_54xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm2_7xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm2_44xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm2_54xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm2xxx_3xxx.h ARM: OMAP2+: raw read and write endian fix 2014-05-08 07:09:53 -07:00
cm2xxx.c ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm2xxx.h ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm3xxx.c ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm3xxx.h ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm33xx.c ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm33xx.h ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm44xx.h ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm81xx.h ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx 2015-12-22 16:23:08 -08:00
cm_common.c ARM: OMAP2+: clock: add low-level support for regmap 2015-03-31 21:26:55 +03:00
cm-regbits-7xx.h ARM: OMAP: DRA7: CM: Add minimal regbit shifts 2013-08-23 04:28:36 -06:00
cm-regbits-24xx.h ARM: OMAP2: convert sys_ck and osc_ck to standard clock types 2014-07-02 14:26:06 +03:00
cm-regbits-33xx.h
cm-regbits-34xx.h ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver 2014-07-06 15:51:23 -06:00
cm-regbits-44xx.h
cm-regbits-54xx.h
cm.h ARM: OMAP2+: CM: determine CM base address from device tree 2015-03-27 10:55:57 +02:00
cminst44xx.c ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
common-board-devices.c
common-board-devices.h arm: omap2: n8x0: move i2c devices to DT 2014-09-16 14:43:11 -07:00
common.c Revert "ARM: OMAP4: remove dead kconfig option OMAP4_ERRATA_I688" 2015-07-25 15:28:14 +01:00
common.h ARM: use const and __initconst for smp_operations 2015-12-01 22:17:45 +01:00
control.c ARM: OMAP2+: Fix out of range register access with syscon_config.max_register 2016-02-22 09:22:38 -08:00
control.h ARM: OMAP3: Add support for configuring MMC pins as GPIO pins 2015-05-20 09:23:43 -07:00
cpuidle34xx.c ARM: OMAP3: Add cpuidle parameters table for omap3430 2016-02-19 10:35:39 -08:00
cpuidle44xx.c Power management and ACPI updates for v4.1-rc1 2015-04-14 20:21:54 -07:00
ctrl_module_wkup_44xx.h
devices.c Merge branch 'enable-devices' into omap-for-v4.5/fixes 2016-01-25 10:46:21 -08:00
display.c ARM: OMAP2: Use the platform_data header for omapdss 2016-06-03 16:01:01 +03:00
display.h ARM/video: omap2: Move omap_display_init declaration to mach-omap2/display.h 2016-06-03 16:00:31 +03:00
dma.c ARM: OMAP2+: DMA: Provide dma_slave_map to omap-dma for legacy boot 2016-02-22 10:00:50 -08:00
drm.c ARM: OMAP2+: display: Create omapdrm device inside omap_display_init 2013-10-08 14:02:35 -07:00
dss-common.c ARM: OMAP2: Use the platform_data header for omapdss 2016-06-03 16:01:01 +03:00
dss-common.h ARM: OMAP2+: pdata-quirks: add legacy display init for IGEPv2 board 2013-10-09 07:54:34 -07:00
fb.c ARM: OMAP2+: Remove calls to deprecacted marco,PTR_RET in the files,fb.c and pmu.c 2015-05-20 10:43:37 -07:00
gpio.c
gpmc-nand.c mtd: nand: omap: Clean up device tree support 2016-04-15 11:53:36 +03:00
gpmc-onenand.c ARM: OMAP2+: Fix onenand initialization to avoid filesystem corruption 2016-02-22 09:24:10 -08:00
gpmc-smsc911x.c ARM: OMAP2+: smsc911x: fix return value check in gpmc_smsc911x_init() 2013-11-14 10:40:36 -08:00
gpmc-smsc911x.h
gpmc.h ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header 2014-11-20 12:11:25 -08:00
hdq1w.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
hdq1w.h
hsmmc.c ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency 2015-05-14 16:22:05 +01:00
hsmmc.h mmc: omap_hsmmc: remove unused slot_id parameter 2014-11-26 14:30:56 +01:00
i2c.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
i2c.h
id.c Revert "ARM: OMAP: Catch callers of revision information prior to it being populated" 2016-04-19 08:01:05 -07:00
id.h
io.c Fixes for omaps against v4.6-rc2, mostly to fix suspend for beagle-x15 2016-04-22 09:45:53 -07:00
iomap.h ARM: DRA7: Provide proper IO map table 2015-07-16 00:06:05 -07:00
Kconfig ARM: OMAP2+: Drop legacy board file for LDP 2016-07-10 23:47:38 -07:00
l3_2xxx.h
l3_3xxx.h
l4_2xxx.h
l4_3xxx.h
Makefile ARM: OMAP2+: Drop legacy board file for LDP 2016-07-10 23:47:38 -07:00
mcbsp.c ARM: OMAP3: McBSP: do not access CM register directly 2013-10-19 10:11:51 -06:00
mmc.h ARM: OMAP2: MMC: include mmc-omap platform header directly 2014-11-26 14:30:53 +01:00
msdi.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
mux34xx.c ARM: OMAP2+: mux: fix trivial typo in name 2013-09-18 12:02:01 -07:00
mux34xx.h
mux.c ARM: OMAP2+: remove superfluous NULL pointer check 2015-03-26 10:33:25 -07:00
mux.h ARM: OMAP2+: remove OMAP_PACKAGE_ZAC and OMAP_PACKAGE_ZAF 2014-02-28 15:36:34 -08:00
omap2-restart.c ARM: OMAP2+: Change core_initcall levels to postcore_initcall 2015-12-03 11:38:09 -08:00
omap3-restart.c ARM: OMAP2+: sparse: add missing function declarations 2015-07-15 23:43:41 -06:00
omap4-common.c ARM: omap2: restore OMAP4 barrier behaviour 2015-07-25 15:28:16 +01:00
omap4-restart.c ARM: OMAP2+: sparse: add missing function declarations 2015-07-15 23:43:41 -06:00
omap4-sar-layout.h
omap24xx.h
omap34xx.h [media] omap3isp: Replace many MMIO regions by two 2015-04-02 16:45:07 -03:00
omap44xx.h
omap54xx.h ARM: DRA7: Provide proper IO map table 2015-07-16 00:06:05 -07:00
omap_device.c ARM: OMAP2+: Fix omap_device for module reload on PM runtime forbid 2016-02-12 08:56:52 -08:00
omap_device.h ARM: OMAP2+: omap_device: add fail hook for runtime_pm when bad data is detected 2013-12-10 09:39:52 -08:00
omap_hwmod_2xxx_3xxx_interconnect_data.c ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs 2014-07-15 05:08:56 -07:00
omap_hwmod_2xxx_3xxx_ipblock_data.c ARM: AM43xx: hwmod: add DSS hwmod data 2014-07-05 17:44:57 -06:00
omap_hwmod_2xxx_interconnect_data.c ARM: OMAP2+: Remove legacy hwmod entries for omap2 2013-11-25 15:31:18 -08:00
omap_hwmod_2xxx_ipblock_data.c ARM: OMAP2+: sparse: add missing static declaration 2015-07-15 23:42:12 -06:00
omap_hwmod_3xxx_data.c ARM: OMAP2+: hwmod data: Add SSI data for omap36xx 2016-02-02 10:06:13 -07:00
omap_hwmod_7xx_data.c ARM: DRA7: hwmod: Add data for GPTimer 12 2016-04-10 13:20:11 -06:00
omap_hwmod_33xx_43xx_common_data.h ARM: OMAP: AM43xx hwmod: Add data for am43xx emif hwmod 2015-06-01 19:22:11 -06:00
omap_hwmod_33xx_43xx_interconnect_data.c ARM: DRA7/AM335x/AM437x: hwmod: Remove gpmc address space from hwmod data 2015-10-23 13:01:24 -06:00
omap_hwmod_33xx_43xx_ipblock_data.c ARM: AMx3xx: RTC: Add lock and unlock functions 2016-04-10 13:20:10 -06:00
omap_hwmod_33xx_data.c ARM: OMAP: AM43xx hwmod: Add data for am43xx emif hwmod 2015-06-01 19:22:11 -06:00
omap_hwmod_43xx_data.c ARM: AM43XX: hwmod: Add rtc hwmod 2016-02-18 21:46:19 -07:00
omap_hwmod_44xx_data.c ARM: omap4: hwmod: Remove elm address space from hwmod data 2015-11-30 13:18:37 -08:00
omap_hwmod_54xx_data.c ARM: OMAP: Remove duplicated operand in OR operation 2015-10-20 01:29:40 -06:00
omap_hwmod_81xx_data.c ARM: OMAP2+: first hwmod fix for v4.6-rc 2016-03-30 10:36:06 -07:00
omap_hwmod_2420_data.c ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs 2014-07-15 05:08:56 -07:00
omap_hwmod_2430_data.c ARM: OMAP1/2+: MMC: separate platform data for mmc and mmc hs driver 2014-11-26 14:30:53 +01:00
omap_hwmod_common_data.c
omap_hwmod_common_data.h ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs 2014-07-15 05:08:56 -07:00
omap_hwmod_common_ipblock_data.c ARM: AM43xx: hwmod: add DSS hwmod data 2014-07-05 17:44:57 -06:00
omap_hwmod_reset.c ARM: OMAP2+: hwmod: RTC: Add lock and unlock functions 2016-04-10 13:20:10 -06:00
omap_hwmod.c ARM: OMAP2+: hwmod: fix _idle() hwmod state sanity check sequence 2016-04-10 13:20:11 -06:00
omap_hwmod.h ARM: OMAP2+: hwmod: RTC: Add lock and unlock functions 2016-04-10 13:20:10 -06:00
omap_opp_data.h
omap_phy_internal.c ARM: OMAP2+: Remove unused ti81xx platform init code 2015-01-14 17:21:00 -08:00
omap_twl.c mfd: twl-core: Fix idle mode signaling for omaps when booted with device tree 2014-04-23 15:31:05 +01:00
omap-headsmp.S ARM: omap5/dra7xx: Enable booting secondary CPU in HYP mode 2015-01-05 15:48:21 -08:00
omap-hotplug.c ARM: Remove __ref on hotplug cpu die path 2015-10-22 09:55:03 -07:00
omap-mpuss-lowpower.c ARM: OMAP2+: sparse: add missing static declaration 2015-07-15 23:42:12 -06:00
omap-pm-noop.c ARM: OMAP2+: omap-pm-noop.c: Remove some unused functions 2015-01-07 09:53:51 -08:00
omap-pm.h ARM: OMAP2+: omap-pm-noop.c: Remove some unused functions 2015-01-07 09:53:51 -08:00
omap-secure.c RX-51: Add support for OMAP3 ROM Random Number Generator 2013-10-08 12:02:12 -07:00
omap-secure.h ARM: omap2: restore OMAP4 barrier behaviour 2015-07-25 15:28:16 +01:00
omap-smc.S ARM: OMAP3: Add secure function omap_smc3() which calling instruction smc #1 2013-10-08 11:55:32 -07:00
omap-smp.c ARM: use const and __initconst for smp_operations 2015-12-01 22:17:45 +01:00
omap-wakeupgen.c ARM: SoC platform updates for v4.7 2016-05-18 12:35:46 -07:00
omap-wakeupgen.h ARM: omap: convert wakeupgen to stacked domains 2015-03-15 00:56:13 +00:00
opp2xxx.h
opp3xxx_data.c
opp4xxx_data.c
opp2420_data.c
opp2430_data.c ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency 2015-05-14 16:22:05 +01:00
opp.c ACPI and power management updates for 3.13-rc1 2013-11-14 13:41:48 +09:00
pdata-quirks.c ir-rx51: use hrtimer instead of dmtimer 2016-06-29 21:54:35 -07:00
pm24xx.c ARM: OMAP2+: Include clk.h 2015-07-20 10:52:36 -07:00
pm34xx.c ARM: OMAP3: Fix external abort on 36xx waking from off mode idle 2016-04-14 08:27:30 -07:00
pm44xx.c ARM: OMAP2+: Remove unneeded semicolons 2015-10-12 10:56:36 -07:00
pm-debug.c
pm.c cpufreq: omap: Use generic platdev driver 2016-04-25 16:18:23 +02:00
pm.h ARM: OMAP4+: PM: erratum is used by OMAP5 and DRA7 as well 2015-09-14 12:14:47 -07:00
pmu.c ARM: OMAP2+: Remove calls to deprecacted marco,PTR_RET in the files,fb.c and pmu.c 2015-05-20 10:43:37 -07:00
powerdomain-common.c ARM: OMAP4: PRCM: remove references to cm-regbits-44xx.h from PRCM core files 2014-05-15 22:35:10 -06:00
powerdomain.c ARM: OMAP2+: voltage: Remove some unused functions 2015-01-07 09:53:51 -08:00
powerdomain.h ARM: OMAP2+: powerdomain.c: Remove some unused functions 2015-01-07 09:53:51 -08:00
powerdomains2xxx_3xxx_data.c
powerdomains2xxx_3xxx_data.h
powerdomains2xxx_data.c
powerdomains3xxx_data.c ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx 2015-12-22 16:23:08 -08:00
powerdomains7xx_data.c ARM: OMAP: DRA7: powerdomain data: Remove wrong OSWR capability 2016-04-13 14:30:10 -07:00
powerdomains33xx_data.c
powerdomains43xx_data.c ARM: OMAP2+: PM: AM43x powerdomain data 2013-10-13 22:48:25 -06:00
powerdomains44xx_data.c
powerdomains54xx_data.c ARM: OMAP5: powerdomain data: fix powerdomain powerstate 2014-09-08 11:22:40 -05:00
prcm43xx.h ARM: AM43xx: Add the PRM IRQ register offsets 2015-07-23 05:54:38 -06:00
prcm44xx.h ARM: OMAP: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters 2013-08-23 04:28:36 -06:00
prcm_mpu7xx.h ARM: OMAP: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters 2013-08-23 04:28:36 -06:00
prcm_mpu44xx.c ARM: OMAP2+: raw read and write endian fix 2014-05-08 07:09:53 -07:00
prcm_mpu44xx.h ARM: OMAP2+: PRCM: cleanup some header includes 2014-05-15 22:34:48 -06:00
prcm_mpu54xx.h
prcm_mpu_44xx_54xx.h
prcm-common.h Merge branch 'dm814x-soc' into omap-for-v4.3/soc 2015-07-23 21:59:18 -07:00
prm2xxx_3xxx.c ARM: OMAP2+: PRM: add generic API for checking hardreset status 2014-10-27 08:39:25 -07:00
prm2xxx_3xxx.h ARM: OMAP2+: PRM: add generic API for checking hardreset status 2014-10-27 08:39:25 -07:00
prm2xxx.c ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm2xxx.h ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm3xxx.c ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm3xxx.h ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm7xx.h ARM: DRA7: hwmod: Add reset data for PCIe 2016-02-09 02:18:52 -07:00
prm33xx.c ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm33xx.h ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm44xx_54xx.h ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm44xx.c ARM: OMAP4+: PRM: Add AM437x specific data 2015-07-23 06:08:24 -06:00
prm44xx.h ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm54xx.h ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm_common.c ARM: OMAP2+: Fix randconfig build warning for dm814_pllss_data 2015-12-22 17:01:02 -08:00
prm-regbits-24xx.h
prm-regbits-33xx.h ARM: OMAP2+: Add back the define for AM33XX_RST_GLOBAL_WARM_SW_MASK 2013-08-29 19:10:59 -07:00
prm-regbits-34xx.h ARM: OMAP2+: Fix omap off idle power consumption creeping up 2015-05-04 08:54:41 -07:00
prm-regbits-44xx.h ARM: OMAP2+: Fix omap off idle power consumption creeping up 2015-05-04 08:54:41 -07:00
prm.h ARM: OMAP4+: PRM: get rid of cpu_is_omap44xx calls from interrupt init 2015-03-31 21:26:53 +03:00
prminst44xx.c ARM: OMAP4+: PRM: add support for passing status register/bit info to reset 2015-05-08 13:05:15 -06:00
prminst44xx.h ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility 2015-03-31 21:26:44 +03:00
scrm44xx.h
scrm54xx.h
sdram-hynix-h8mbx00u0mer-0em.h
sdram-micron-mt46h32m32lf-6.h
sdram-nokia.c
sdram-nokia.h
sdram-numonyx-m65kxxxxam.h
sdram-qimonda-hyb18m512160af-6.h
sdrc2xxx.c ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency 2015-05-14 16:22:05 +01:00
sdrc.c
sdrc.h ARM: OMAP2+: raw read and write endian fix 2014-05-08 07:09:53 -07:00
serial.c ARM: OMAP: serial: Rename DRIVER_NAME 2016-02-06 23:13:30 -08:00
serial.h
sleep24xx.S
sleep34xx.S ARM: OMAP2+: Fix l2_inv_api_params for rodata 2016-01-22 08:26:08 -08:00
sleep44xx.S ARM: OMAP2+: Fix ppa_zero_params and ppa_por_params for rodata 2016-01-22 08:26:08 -08:00
smartreflex-class3.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
soc.h ARM: SoC platform updates for v4.7 2016-05-18 12:35:46 -07:00
sr_device.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
sram242x.S ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency 2015-05-14 16:22:05 +01:00
sram243x.S ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency 2015-05-14 16:22:05 +01:00
sram.c ARM: OMAP3: clock: remove un-used core dpll re-program code 2015-10-14 12:35:27 -07:00
sram.h ARM: OMAP3: clock: remove un-used core dpll re-program code 2015-10-14 12:35:27 -07:00
ti81xx-restart.c ARM: OMAP2+: Fix reboot for 81xx 2015-01-14 17:37:16 -08:00
ti81xx.h
timer.c ARM: SoC platform updates for v4.5 2016-01-20 18:10:05 -08:00
twl-common.c ARM: OMAP: Work around hardcoded interrupts 2015-01-17 08:56:12 -08:00
twl-common.h
usb-host.c usb: phy: rename <linux/usb/usb_phy_gen_xceiv.h> to <linux/usb/usb_phy_generic.h> 2014-04-21 14:07:24 -05:00
usb-musb.c ARM: OMAP2+: Remove unused ti81xx platform init code 2015-01-14 17:21:00 -08:00
usb-tusb6010.c ARM OMAP2+ GPMC: calculate GPMCFCLKDIVIDER based on WAITMONITORINGTIME 2015-03-06 12:39:48 +02:00
usb.h ARM: OMAP2+: Remove unused ti81xx platform init code 2015-01-14 17:21:00 -08:00
vc3xxx_data.c ARM: OMAP2+: Fix omap off idle power consumption creeping up 2015-05-04 08:54:41 -07:00
vc44xx_data.c ARM: OMAP2+: Fix omap off idle power consumption creeping up 2015-05-04 08:54:41 -07:00
vc.c ARM: OMAP3: vc: Remove unused macros 2015-10-12 10:56:36 -07:00
vc.h ARM: OMAP2+: Fix omap off idle power consumption creeping up 2015-05-04 08:54:41 -07:00
voltage.c ARM: OMAP2+: voltage: Remove some unused functions 2015-01-07 09:53:51 -08:00
voltage.h ARM: OMAP2+: voltage: Remove some unused functions 2015-01-07 09:53:51 -08:00
voltagedomains2xxx_data.c
voltagedomains3xxx_data.c ARM: appropriate __init annotation for const data 2015-07-28 13:55:27 +02:00
voltagedomains44xx_data.c ARM: appropriate __init annotation for const data 2015-07-28 13:55:27 +02:00
voltagedomains54xx_data.c ARM: appropriate __init annotation for const data 2015-07-28 13:55:27 +02:00
vp3xxx_data.c ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone 2015-03-25 11:03:39 +02:00
vp44xx_data.c ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone 2015-03-25 11:03:39 +02:00
vp.c
vp.h ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone 2015-03-25 11:03:39 +02:00
wd_timer.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
wd_timer.h